From: Dario Binacchi Date: Mon, 24 Feb 2025 18:39:26 +0000 (+0100) Subject: ARM: dts: stm32: drop "st,led1" compatible X-Git-Tag: v2025.07-rc1~18^2~51^2~11 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=3ab4f860daf407e46a1ad8b20ff77b7a6171a157;p=pandora-u-boot.git ARM: dts: stm32: drop "st,led1" compatible It is pointless to use the custom compatible "st,led1" when stm32746g-eval.dts and stm32f769-disco.dts already contain the "gpio-leds" compatible, which is specifically used for GPIO LEDs management. Signed-off-by: Dario Binacchi Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32746g-eval-u-boot.dtsi b/arch/arm/dts/stm32746g-eval-u-boot.dtsi index f6432928735..32b5c7cea4b 100644 --- a/arch/arm/dts/stm32746g-eval-u-boot.dtsi +++ b/arch/arm/dts/stm32746g-eval-u-boot.dtsi @@ -22,11 +22,6 @@ mmc0 = &sdio1; spi0 = &qspi; }; - - led1 { - compatible = "st,led1"; - led-gpio = <&gpiof 10 0>; - }; }; &fmc { diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi index a79fca261a2..38d797e49a0 100644 --- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi @@ -22,11 +22,6 @@ mmc0 = &sdio1; spi0 = &qspi; }; - - led1 { - compatible = "st,led1"; - led-gpio = <&gpioi 1 0>; - }; }; <dc { diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi index a50fba64dcd..7c99a6e61b6 100644 --- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi +++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi @@ -23,11 +23,6 @@ spi0 = &qspi; }; - led1 { - compatible = "st,led1"; - led-gpio = <&gpioj 5 0>; - }; - panel: panel { compatible = "orisetech,otm8009a"; reset-gpios = <&gpioj 15 1>; diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c index 65a39d965c7..72f479cea66 100644 --- a/board/st/stm32f746-disco/stm32f746-disco.c +++ b/board/st/stm32f746-disco/stm32f746-disco.c @@ -78,22 +78,6 @@ u32 spl_boot_device(void) int board_late_init(void) { - struct gpio_desc gpio = {}; - int node; - - node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, "st,led1"); - if (node < 0) - return -1; - - gpio_request_by_name_nodev(offset_to_ofnode(node), "led-gpio", 0, &gpio, - GPIOD_IS_OUT); - - if (dm_gpio_is_valid(&gpio)) { - dm_gpio_set_value(&gpio, 0); - mdelay(10); - dm_gpio_set_value(&gpio, 1); - } - return 0; }