From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Tue, 29 Jun 2021 17:53:11 +0000 (+0300)
Subject: arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS
X-Git-Tag: v2021.10-rc1~39^2~8
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=39dca76c34ebd06a1d7f9832598f697ff0dc8127;p=pandora-u-boot.git

arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS

Due to an upstream change, the ls1028a.dtsi bindings for the mscc_felix
switch got accepted with all ports disabled by default and with no link
to the DSA master - this needs to be done on a per board basis.

Note that enetc-2 is not currently disabled in the ls1028a.dtsi, but
presumably at some point it might become. Explicitly enable it in the
QDS device trees anyway, to proactively avoid issues when that happens.

Fixes: a7fdac7e2a2a ("arm: dts: ls1028a: define QDS networking protocol combinations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
---

diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
index fb1836a8aef..5a0f060c16e 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
@@ -20,6 +20,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -47,3 +51,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
index 1d02a3e11de..39a83e10c4c 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -24,3 +28,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
index c92dd1bd2e9..021fe3fbc67 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -34,6 +34,10 @@
 	#include "fsl-sch-24801.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -61,3 +65,8 @@
 	phy-mode = "sgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
index 941f7472eb0..b6704d8089a 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -19,6 +19,10 @@
 	#include "fsl-sch-24801.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -46,3 +50,8 @@
 	phy-mode = "sgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
index 7e483e656e2..8c10897e565 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -19,6 +19,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -46,3 +50,8 @@
 	phy-mode = "usxgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
index 49fffdb9cb2..1d800dacef8 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
@@ -13,6 +13,10 @@
 	#include "fsl-sch-28021.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -40,3 +44,8 @@
 	phy-mode = "qsgmii";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
index 8347462f4cb..1fb2cdf0c24 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30842.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -18,3 +22,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
index 6be3b5094c8..2333f74e5ae 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30842.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -18,3 +22,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};