From: Rajashekhara, Mahesh <Mahesh_Rajashekhara@adaptec.com>
Date: Mon, 10 May 2010 11:17:57 +0000 (-0700)
Subject: [SCSI] aacraid: add support for handling ATA pass-through commands.
X-Git-Tag: v2.6.35-rc1~470^2^2~2
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1fc8010a5d9a27391db2be103b13f4ac80990cfc;p=pandora-kernel.git

[SCSI] aacraid: add support for handling ATA pass-through commands.

There are two conditions for ATA pass thru command that falls into
'SRB_STATUS_ERROR' condition.

1. When the "CC" bit is set by the host in ATA pass-through CDB

   - Even for the successful completion, SCSI target shall generate
     check condition.

   - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a
     driver byte of DID_OK to the mid layer.

     Below is the snippet of existing code which fills a result code
     of SAM_STAT_CHECK_CONDITION:

	***********************************
	        if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
                		int len;
	               		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
			..........
	************************************

2. When the "CC" bit is reset by the host and if SCSI target generates
   a check condition when an error occurs.

   - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a
     driver byte of DID_ERROR to the mid layer.

Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---

Reading git-diff-tree failed