From: Marcin Juszkiewicz <hrw@openembedded.org>
Date: Tue, 26 Jun 2007 09:36:40 +0000 (+0000)
Subject: prism3-firmware: dropped in favour of prism-firmware
X-Git-Tag: Release-2010-05/1~8868^2~261^2~23^2^2~2
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=1a2f5e35fc5f0f94abade0c5722d3703f226718f;p=openembedded.git

prism3-firmware: dropped in favour of prism-firmware
---

diff --git a/packages/misc-binary-only/prism3-firmware_1.8.3.bb b/packages/misc-binary-only/prism3-firmware_1.8.3.bb
deleted file mode 100644
index fb8f83afac..0000000000
--- a/packages/misc-binary-only/prism3-firmware_1.8.3.bb
+++ /dev/null
@@ -1,27 +0,0 @@
-DESCRIPTION = "Firmware for the Prism3 cards"
-SECTION = "base"
-LICENSE = "Unknown"
-PR = "r3"
-
-SRC_URI = "http://www.red-bean.com/~proski/firmware/${PV}.tar.bz2 \
-           http://www.red-bean.com/~proski/firmware/primary.tar.bz2"
-S = "${WORKDIR}"
-
-do_install() {
-	install -d ${D}${sysconfdir}/pcmcia/
-	install -m 0644 primary/pm010102.hex ${D}${sysconfdir}/pcmcia/
-	install -m 0644 ${PV}/rf010803.hex ${D}${sysconfdir}/pcmcia/
-	cat >${D}${sysconfdir}/pcmcia/README.prism3-firmware <<EOF
-To make a prism3 card w/ downloadable firmware work, do the following:
-	0.) Install hostap-utils
-	1.) Add "needs_reset yes" and "needs_firmware hostap_fw_load" to
-	    the proper interface in /etc/network/interfaces
-	2.) echo -e "#!/bin/sh\nifdown wlan0" >> /etc/apm/suspend.d/ifdown
-	3.) chmod a+rx /etc/apm/suspend.d/ifdown
-	4.) echo -e "#!/bin/sh\nifup wlan0" >> /etc/apm/resume.d/ifup
-	5.) chmod a+rx /etc/apm/suspend.d/ifup
-EOF
-}
-
-PACKAGE_ARCH = "all"
-
diff --git a/packages/misc-binary-only/prism3-firmware_1.8.4.bb b/packages/misc-binary-only/prism3-firmware_1.8.4.bb
deleted file mode 100644
index 2983ea7710..0000000000
--- a/packages/misc-binary-only/prism3-firmware_1.8.4.bb
+++ /dev/null
@@ -1,27 +0,0 @@
-DESCRIPTION = "Firmware for the Prism3 cards"
-SECTION = "base"
-LICENSE = "Unknown"
-PR = "r0"
-
-SRC_URI = "http://www.red-bean.com/~proski/firmware/${PV}.tar.bz2 \
-           http://www.red-bean.com/~proski/firmware/primary.tar.bz2"
-S = "${WORKDIR}"
-
-do_install() {
-	install -d ${D}${sysconfdir}/pcmcia/
-	install -m 0644 primary/pm010102.hex ${D}${sysconfdir}/pcmcia/
-	install -m 0644 ${PV}/rf010804.hex ${D}${sysconfdir}/pcmcia/
-	cat >${D}${sysconfdir}/pcmcia/README.prism3-firmware <<EOF
-To make a prism3 card w/ downloadable firmware work, do the following:
-	0.) Install hostap-utils
-	1.) Add "needs_reset yes" and "needs_firmware hostap_fw_load" to
-	    the proper interface in /etc/network/interfaces
-	2.) echo -e "#!/bin/sh\nifdown wlan0" >> /etc/apm/suspend.d/ifdown
-	3.) chmod a+rx /etc/apm/suspend.d/ifdown
-	4.) echo -e "#!/bin/sh\nifup wlan0" >> /etc/apm/resume.d/ifup
-	5.) chmod a+rx /etc/apm/suspend.d/ifup
-EOF
-}
-
-PACKAGE_ARCH = "all"
-