From: Jarod Wilson Date: Thu, 10 Dec 2009 19:46:06 +0000 (-0300) Subject: V4L/DVB (13597): bttv: add i2c addr for old WinTV card to IR probe list X-Git-Tag: v2.6.33-rc1~70^2~69 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=0d94e29459d372b6c5dda964a8b35a8d40050ca7;p=pandora-kernel.git V4L/DVB (13597): bttv: add i2c addr for old WinTV card to IR probe list There are old bttv-driven Hauppauge WinTV series cards that have their IR part at i2c addr 0x71, which doesn't get considered in the new 2.6.31 i2c code. From a 2.6.29 kernel: lirc_i2c: chip 0x10005 found @ 0x71 (Hauppauge PVR150) Minor cosmetic glitch, the card in question isn't actually a PVR-150, its: 03:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at f4ffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: bttv Kernel modules: bttv Device ID: 0x109e:0x036e, Sub-Device ID: 0x0070:0x13eb This simply adds 0x71 to the list of addresses i2c_new_probed_device should consider, which gets IR working on this card again. Reported-by: Adam Williamson Tested-by: Adam Williamson Signed-off-by: Jarod Wilson Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Reading git-diff-tree failed