From: Hironori KIKUCHI <kikuchan98@gmail.com>
Date: Fri, 31 Jan 2025 01:38:41 +0000 (+0900)
Subject: spi: soft_spi: Add support for SPI_3WIRE
X-Git-Tag: v2025.07-rc1~18^2~99
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=064556910e61044f1295162ceaad600582b66cda;p=pandora-u-boot.git

spi: soft_spi: Add support for SPI_3WIRE

When 3-wire mode is claimed on the bus, use the MOSI (output) pin to
receive data. In this mode, since the transfer can only be either TX
or RX, return -EINVAL if both are required at the same time.

Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
---

diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c
index a8ec2f4f7b4..50bd7be5640 100644
--- a/drivers/spi/soft_spi.c
+++ b/drivers/spi/soft_spi.c
@@ -124,8 +124,19 @@ static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
 	u8		*rxd = din;
 	int		cpha = !!(priv->mode & SPI_CPHA);
 	int		cidle = !!(priv->mode & SPI_CPOL);
+	int		txrx = plat->flags;
 	unsigned int	j;
 
+	if (priv->mode & SPI_3WIRE) {
+		if (txd && rxd)
+			return -EINVAL;
+
+		txrx = txd ? SPI_MASTER_NO_RX : SPI_MASTER_NO_TX;
+		dm_gpio_set_dir_flags(&plat->mosi,
+				      txd ? GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE :
+					    GPIOD_IS_IN | GPIOD_PULL_UP);
+	}
+
 	debug("spi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n",
 	      dev->parent->name, dev->name, *(uint *)txd, *(uint *)rxd,
 	      bitlen);
@@ -160,7 +171,7 @@ static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
 		 */
 		if (cpha)
 			soft_spi_scl(dev, !cidle);
-		if ((plat->flags & SPI_MASTER_NO_TX) == 0)
+		if ((txrx & SPI_MASTER_NO_TX) == 0)
 			soft_spi_sda(dev, !!(tmpdout & 0x80));
 		udelay(plat->spi_delay_us);
 
@@ -174,8 +185,10 @@ static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
 		else
 			soft_spi_scl(dev, cidle);
 		tmpdin	<<= 1;
-		if ((plat->flags & SPI_MASTER_NO_RX) == 0)
-			tmpdin	|= dm_gpio_get_value(&plat->miso);
+		if ((txrx & SPI_MASTER_NO_RX) == 0)
+			tmpdin |= dm_gpio_get_value((priv->mode & SPI_3WIRE) ?
+							    &plat->mosi :
+							    &plat->miso);
 		tmpdout	<<= 1;
 		udelay(plat->spi_delay_us);