From: Axel Lin Date: Sun, 9 Feb 2014 16:08:05 +0000 (+0800) Subject: spi: core: Set max_speed_hz of spi_device default to max_speed_hz of controller X-Git-Tag: v3.15-rc1~147^2~6^3~4 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=052eb2d49006fe53bc5f62a196dce23345d4a907;p=pandora-kernel.git spi: core: Set max_speed_hz of spi_device default to max_speed_hz of controller In __spi_validate(), xfer->speed_hz is set to be spi->max_speed_hz if it is not set for this transfer. However, if spi->max_speed_hz is also not set, xfer->speed_hz is 0. Some drivers (e.g. au1550, tegra114, tegra20-sflash, tegra20-slink, etc.) then use below code to avoid setting xfer->speed_hz to 0. /* Set speed to the spi max fequency if spi device has not set */ spi->max_speed_hz = spi->max_speed_hz ? : tspi->spi_max_frequency; Let's handle it in spi core. If spi->max_speed_hz is not set, make it default to spi->master->max_speed_hz. So In __spi_validate() if both xfer->speed_hz and spi->max_speed_hz are not set, xfer->speed_hz will be set to spi->master->max_speed_hz. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- Reading git-diff-tree failed