--- /dev/null
+ arch/arm/common/locomo.c | 6
+ arch/arm/common/sharpsl_pm.c | 9
+ arch/arm/mach-pxa/Kconfig | 1
+ arch/arm/mach-pxa/Makefile | 2
+ arch/arm/mach-pxa/poodle_pm.c | 355 ++++++++++++++++++++++++++++++++++++++
+ include/asm-arm/hardware/locomo.h | 5
+ 6 files changed, 377 insertions(+), 1 deletion(-)
+
+Index: linux-2.6.26/arch/arm/common/sharpsl_pm.c
+===================================================================
+--- linux-2.6.26.orig/arch/arm/common/sharpsl_pm.c 2008-08-05 22:15:07.000000000 -0700
++++ linux-2.6.26/arch/arm/common/sharpsl_pm.c 2008-08-05 22:15:11.000000000 -0700
+@@ -458,6 +458,10 @@
+ {
+ int temp, i, buff[5];
+
++ /* Some devices don't support this */
++ if (!sharpsl_pm.machinfo->charge_acin_high)
++ return 0;
++
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+@@ -598,6 +602,9 @@
+
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
++ if (machine_is_poodle())
++ return 0;
++
+ /* Check AC-Adapter */
+ acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+@@ -664,6 +671,7 @@
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+ /* AC Check */
++ if (!machine_is_poodle())
+ if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+ return sharpsl_off_charge_error();
+
+@@ -686,6 +694,7 @@
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
++ if (!machine_is_poodle())
+ if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+ return sharpsl_off_charge_error();
+
+Index: linux-2.6.26/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.26.orig/arch/arm/mach-pxa/Kconfig 2008-08-05 22:15:05.000000000 -0700
++++ linux-2.6.26/arch/arm/mach-pxa/Kconfig 2008-08-05 22:16:25.000000000 -0700
+@@ -210,6 +210,7 @@
+ bool "Enable Sharp SL-5600 (Poodle) Support"
+ depends on PXA_SHARPSL_25x
+ select SHARP_LOCOMO
++ select SHARPSL_PM
+ select PXA_SSP
+
+ config MACH_CORGI
+Index: linux-2.6.26/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.26.orig/arch/arm/mach-pxa/Makefile 2008-08-05 22:15:05.000000000 -0700
++++ linux-2.6.26/arch/arm/mach-pxa/Makefile 2008-08-05 22:16:25.000000000 -0700
+@@ -30,7 +30,7 @@
+ obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
+ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
+ obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
+-obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
++obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o
+ obj-$(CONFIG_MACH_HX2750) += hx2750.o hx2750_test.o
+ obj-$(CONFIG_MACH_PCM027) += pcm027.o
+ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
+Index: linux-2.6.26/arch/arm/mach-pxa/poodle_pm.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.26/arch/arm/mach-pxa/poodle_pm.c 2008-08-05 22:21:31.000000000 -0700
+@@ -0,0 +1,356 @@
++/*
++ * Battery and Power Management code for the Sharp SL-5600
++ *
++ * Copyright (c) 2006 Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/stat.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/apm-emulation.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/hardware/scoop.h>
++#include <asm/hardware/locomo.h>
++
++#include <asm/arch/sharpsl.h>
++#include <asm/arch/poodle.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxa2xx-gpio.h>
++#include "sharpsl.h"
++
++#if 0
++#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
++#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
++#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
++#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
++#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
++#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
++#endif
++
++#define SHARPSL_CHARGE_ON_VOLT 1187 // 2.9V
++#define SHARPSL_CHARGE_ON_TEMP 2441
++#define SHARPSL_FATAL_NOACIN_VOLT 1454 // 3.55V
++#define SHARPSL_FATAL_ACIN_VOLT 1474 // 3.60V
++
++
++#if 0
++#define SHARPSL_POWER_MODE_CHECK 1475
++#define SHARPSL_POODLE_FATAL_VOLT 1433
++#define SHARPSL_POODLE_FATAL_NOACIN_FLON_VOLT 1454 // 3.55V
++#define SHARPSL_POODLE_FATAL_NOACIN_FLOFF_VOLT 1433 // 3.50V
++#define SHARPSL_POODLE_FATAL_ACIN_FLON_VOLT 1474 // 3.60V
++#define SHARPSL_POODLE_FATAL_ACIN_FLOFF_VOLT 1454 // 3.55V
++#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 5 // 50msec
++#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 1 // 10msec
++#define SHARPSL_WAIT_DISCHARGE_ON 5 // 50msec
++#endif
++
++
++struct battery_thresh poodle_battery_levels_fl[] = {
++ {1582, 100},
++ {1527, 75},
++ {1482, 50},
++ {1458, 25},
++ {1404, 5},
++ { 0, 0},
++};
++
++struct battery_thresh poodle_battery_levels_nofl[] = {
++ {1589, 100},
++ {1536, 75},
++ {1490, 50},
++ {1466, 25},
++ {1413, 5},
++ { 0, 0},
++};
++
++struct battery_thresh poodle_battery_levels_acin_fl[] = {
++ {1601, 100},
++ {1536, 75},
++ {1503, 50},
++ {1482, 25},
++ { 0, 5},
++ { 0, 0},
++};
++
++struct battery_thresh poodle_battery_levels_acin_nofl[] = {
++ {1609, 100},
++ {1548, 75},
++ {1527, 50},
++ {1495, 25},
++ { 0, 5},
++ { 0, 0},
++};
++
++static void poodle_charger_init(void)
++{
++ pxa_gpio_mode(POODLE_GPIO_ADC_TEMP_ON | GPIO_OUT);
++ pxa_gpio_mode(POODLE_GPIO_CHRG_ON | GPIO_OUT);
++ pxa_gpio_mode(POODLE_GPIO_BYPASS_ON | GPIO_OUT);
++ pxa_gpio_mode(POODLE_GPIO_ON_KEY | GPIO_IN);
++ sharpsl_pm_pxa_init();
++}
++
++static void poodle_measure_temp(int on)
++{
++ if (on)
++ GPSR(POODLE_GPIO_ADC_TEMP_ON) = GPIO_bit(POODLE_GPIO_ADC_TEMP_ON);
++ else
++ GPCR(POODLE_GPIO_ADC_TEMP_ON) = GPIO_bit(POODLE_GPIO_ADC_TEMP_ON);
++}
++
++extern struct locomo_dev *frontlight_dev;
++
++static void poodle_charge(int on)
++{
++ if (on) {
++ GPSR(POODLE_GPIO_CHRG_ON) = GPIO_bit(POODLE_GPIO_CHRG_ON);
++ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_JK_B, 1);
++ } else {
++ GPCR(POODLE_GPIO_CHRG_ON) = GPIO_bit(POODLE_GPIO_CHRG_ON);
++ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_JK_B, 0);
++ }
++}
++
++static void poodle_discharge(int on)
++{
++ if (on)
++ GPSR(POODLE_GPIO_DISCHARGE_ON) = GPIO_bit(POODLE_GPIO_DISCHARGE_ON);
++ else
++ GPCR(POODLE_GPIO_DISCHARGE_ON) = GPIO_bit(POODLE_GPIO_DISCHARGE_ON);
++}
++
++static void poodle_presuspend(void)
++{
++ int i;
++ unsigned long wakeup_mask;
++
++ /* charging , so CHARGE_ON bit is HIGH during OFF. */
++ if (READ_GPIO_BIT(POODLE_GPIO_CHRG_ON))
++ PGSR1 |= GPIO_bit(POODLE_GPIO_CHRG_ON);
++ else
++ PGSR1 &= ~GPIO_bit(POODLE_GPIO_CHRG_ON);
++
++// if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN))
++// PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN);
++// else
++// PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN);
++
++ /* Resume on keyboard power key */
++// PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0);
++
++ wakeup_mask = GPIO_bit(POODLE_GPIO_ON_KEY) | GPIO_bit(POODLE_GPIO_WAKEUP);
++ wakeup_mask |= GPIO_bit(POODLE_GPIO_AC_IN) | GPIO_bit(POODLE_GPIO_CHRG_FULL);
++ wakeup_mask |= GPIO_bit(POODLE_GPIO_MAIN_BAT_LOW) | GPIO_bit(POODLE_GPIO_CF_CD);
++ wakeup_mask |= GPIO_bit(POODLE_GPIO_HP_IN) | GPIO_bit(POODLE_GPIO_GA_INT) | GPIO_bit(POODLE_GPIO_nSD_INT);
++
++
++// if (!machine_is_corgi())
++// GPDR0 &= ~(GPIO_bit(15) | GPIO_bit(8)); /* Float n_CS1 */
++
++ PWER = wakeup_mask | PWER_RTC;
++ PRER = wakeup_mask;
++ PFER = wakeup_mask;
++
++ for (i = 0; i <=15; i++) {
++ if (PRER & PFER & GPIO_bit(i)) {
++ if (GPLR0 & GPIO_bit(i) )
++ PRER &= ~GPIO_bit(i);
++ else
++ PFER &= ~GPIO_bit(i);
++ }
++ }
++}
++
++static void poodle_postsuspend(void)
++{
++// if (!machine_is_corgi())
++// GPDR0 |= GPIO_bit(15) | GPIO_bit(8); /* Un-Float n_CS1 */
++}
++
++/*
++ * Check what brought us out of the suspend.
++ * Return: 0 to sleep, otherwise wake
++ */
++static int poodle_should_wakeup(unsigned int resume_on_alarm)
++{
++ int is_resume = 0;
++
++ dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
++
++ if ((PEDR & GPIO_bit(POODLE_GPIO_AC_IN))) {
++ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
++ /* charge on */
++ dev_dbg(sharpsl_pm.dev, "ac insert\n");
++ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
++ } else {
++ /* charge off */
++ dev_dbg(sharpsl_pm.dev, "ac remove\n");
++ sharpsl_pm_led(SHARPSL_LED_OFF);
++ sharpsl_pm.machinfo->charge(0);
++ sharpsl_pm.charge_mode = CHRG_OFF;
++ }
++ }
++
++ if ((PEDR & GPIO_bit(POODLE_GPIO_CHRG_FULL)))
++ dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_ON_KEY))
++ is_resume |= GPIO_bit(POODLE_GPIO_ON_KEY);
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_WAKEUP))
++ is_resume |= GPIO_bit(POODLE_GPIO_WAKEUP);
++
++// if ( (apm_wakeup_factor & GPIO_bit(GPIO_GA_INT)) && (LCM_KIC & 1) ) {
++// LCM_KIC &= ~0x100;
++// LCM_ICR &= ~0x100;
++// is_resume |= GPIO_bit(GPIO_GA_INT);
++// }
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_CF_STSCHG))
++ is_resume |= GPIO_bit(POODLE_GPIO_CF_STSCHG);
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_nSD_INT))
++ is_resume |= GPIO_bit(POODLE_GPIO_nSD_INT);
++
++ if (PEDR & GPIO_bit(POODLE_GPIO_HP_IN))
++ is_resume |= GPIO_bit(POODLE_GPIO_HP_IN);
++
++ if (resume_on_alarm && (PEDR & PWER_RTC))
++ is_resume |= PWER_RTC;
++
++ dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
++ return is_resume;
++}
++
++static unsigned long poodle_charger_wakeup(void)
++{
++ return ~GPLR0 & ( GPIO_bit(POODLE_GPIO_AC_IN) | GPIO_bit(POODLE_GPIO_ON_KEY) | GPIO_bit(POODLE_GPIO_WAKEUP) );
++}
++
++#define MUX_CHL 6u
++#define BATT_CHL 2u
++
++/* ADS7846 Touch Screen Controller bit definitions */
++#define ADSCTRL_PD0 (1u << 0) /* PD0 */
++#define ADSCTRL_PD1 (1u << 1) /* PD1 */
++#define ADSCTRL_DFR (1u << 2) /* SER/DFR */
++#define ADSCTRL_MOD (1u << 3) /* Mode */
++#define ADSCTRL_ADR_SH 4 /* Address setting */
++#define ADSCTRL_STS (1u << 7) /* Start Bit */
++
++int poodle_pm_read_ads7846(int channel)
++{
++ int voltage;
++ int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | ADSCTRL_DFR |
++ (channel << ADSCTRL_ADR_SH) | ADSCTRL_STS;
++
++ corgi_ssp_ads7846_lock();
++
++ corgi_ssp_ads7846_put(cmd);
++ corgi_ssp_ads7846_get();
++
++ corgi_ssp_ads7846_put(cmd);
++ voltage = corgi_ssp_ads7846_get();
++
++ /* Power-Down Enable */
++ corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
++ corgi_ssp_ads7846_get();
++
++ corgi_ssp_ads7846_unlock();
++
++ return voltage;
++}
++
++unsigned long poodlepm_read_devdata(int type)
++{
++ switch(type) {
++ case SHARPSL_STATUS_ACIN:
++ return ((GPLR(POODLE_GPIO_AC_IN) & GPIO_bit(POODLE_GPIO_AC_IN)) != 0);
++ case SHARPSL_STATUS_LOCK:
++ return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
++ case SHARPSL_STATUS_CHRGFULL:
++ return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
++ case SHARPSL_STATUS_FATAL:
++ return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
++// case SHARPSL_ACIN_VOLT:
++// return poodle_pm_read_ads7846(MAX1111_ACIN_VOLT);
++// FIXME
++ case SHARPSL_BATT_TEMP:
++ return poodle_pm_read_ads7846(MUX_CHL);
++ case SHARPSL_BATT_VOLT:
++ default:
++ return poodle_pm_read_ads7846(BATT_CHL);
++ }
++}
++
++static void poodle_limit_intensity(int limit)
++{
++}
++
++static struct sharpsl_charger_machinfo poodle_pm_machinfo = {
++ .init = poodle_charger_init,
++ .exit = sharpsl_pm_pxa_remove,
++ .gpio_batlock = POODLE_GPIO_BAT_COVER,
++ .gpio_acin = POODLE_GPIO_AC_IN,
++ .gpio_batfull = POODLE_GPIO_CHRG_FULL,
++ .batfull_irq = 1,
++ .discharge = poodle_discharge,
++ .charge = poodle_charge,
++ .measure_temp = poodle_measure_temp,
++ .presuspend = poodle_presuspend,
++ .postsuspend = poodle_postsuspend,
++ .read_devdata = poodlepm_read_devdata,
++ .charger_wakeup = poodle_charger_wakeup,
++ .should_wakeup = poodle_should_wakeup,
++ .backlight_limit = poodle_limit_intensity,
++ .charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
++ .charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
++ .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
++ .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
++ .bat_levels = 6,
++ .bat_levels_noac = poodle_battery_levels_fl,
++ .bat_levels_acin = poodle_battery_levels_nofl,
++ .status_high_acin = 1490,
++ .status_low_acin = 1466,
++ .status_high_noac = 1482,
++ .status_low_noac = 1458,
++};
++
++static struct platform_device *poodlepm_device;
++
++static int __devinit poodlepm_init(void)
++{
++ int ret;
++
++ poodlepm_device = platform_device_alloc("sharpsl-pm", -1);
++ if (!poodlepm_device)
++ return -ENOMEM;
++
++ poodlepm_device->dev.platform_data = &poodle_pm_machinfo;
++ ret = platform_device_add(poodlepm_device);
++
++ if (ret)
++ platform_device_put(poodlepm_device);
++
++ return ret;
++}
++
++static void poodlepm_exit(void)
++{
++ platform_device_unregister(poodlepm_device);
++}
++
++module_init(poodlepm_init);
++module_exit(poodlepm_exit);
+Index: linux-2.6.26/arch/arm/common/locomo.c
+===================================================================
+--- linux-2.6.26.orig/arch/arm/common/locomo.c 2008-07-13 14:51:29.000000000 -0700
++++ linux-2.6.26/arch/arm/common/locomo.c 2008-08-05 22:16:20.000000000 -0700
+@@ -600,6 +600,7 @@
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
++ // FIXME - should save JK_B
+ locomo_writel(0x00, lchip->base + LOCOMO_GPO);
+ save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
+ locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+@@ -1101,11 +1102,16 @@
+
+ static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
+
++struct locomo_dev *frontlight_dev;
++EXPORT_SYMBOL(frontlight_dev);
++
+ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
+ {
+ unsigned long flags;
+ struct locomo *lchip = locomo_chip_driver(dev);
+
++ frontlight_dev = dev;
++
+ if (vr)
+ locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
+ else
+Index: linux-2.6.26/include/asm-arm/hardware/locomo.h
+===================================================================
+--- linux-2.6.26.orig/include/asm-arm/hardware/locomo.h 2008-07-13 14:51:29.000000000 -0700
++++ linux-2.6.26/include/asm-arm/hardware/locomo.h 2008-08-05 22:15:11.000000000 -0700
+@@ -100,6 +100,12 @@
+ #define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+ #define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+ #define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
++#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
++#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
++#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
++#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
++#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
++
+
+ /* Start the definitions of the devices. Each device has an initial
+ * base address and a series of offsets from that base address. */
git.openpandora.org / openembedded.git / commitdiff