--- /dev/null
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba,
+# read the Samba-HOWTO-Collection. This may be obtained from:
+# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the
+# Samba-Guide which is generated daily and can be downloaded from:
+# http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors.
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
+ workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+ server string = Samba Server
+
+# Security mode. Defines in which mode Samba will operate. Possible
+# values are share, user, server, domain and ads. Most people will want
+# user level security. See the Samba-HOWTO-Collection for details.
+ security = user
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+; hosts allow = 192.168.1. 192.168.2. 127.
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+ load printers = yes
+
+# you may wish to override the location of the printcap file
+; printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+; printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+; printing = cups
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+; guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+ max log size = 50
+
+# Use password server option only with security = server
+# The argument list may include:
+# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+# password server = *
+; password server = <NT-Server-Name>
+
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+; realm = MY_REALM
+
+# Backend to store user information in. New installations should
+# use either tdbsam or ldapsam. smbpasswd is available for backwards
+# compatibility. tdbsam requires no further configuration.
+; passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+# this line. The included file is read at that point.
+; include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+; interfaces = 192.168.12.2/24 192.168.13.2/24
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+; local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+; os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+; domain master = yes
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+; preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for
+# Windows95 workstations.
+; domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+; logon script = %m.bat
+# run a specific logon batch file per username
+; logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+# %L substitutes for this servers netbios name, %U is username
+# You must uncomment the [Profiles] share below
+; logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+; wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one WINS Server on the network. The default is NO.
+; wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+ dns proxy = no
+
+# These scripts are used on a domain controller or stand-alone
+# machine to add or delete corresponding unix accounts
+; add user script = /usr/sbin/useradd %u
+; add group script = /usr/sbin/groupadd %g
+; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+; delete user script = /usr/sbin/userdel %u
+; delete user from group script = /usr/sbin/deluser %u %g
+; delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
+[homes]
+ comment = Home Directories
+ browseable = no
+ writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+; comment = Network Logon Service
+; path = /usr/local/samba/lib/netlogon
+; guest ok = yes
+; writable = no
+; share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+; path = /usr/local/samba/profiles
+; browseable = no
+; guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to
+# specifically define each individual printer
+[printers]
+ comment = All Printers
+ path = /var/spool/samba
+ browseable = no
+# Set public = yes to allow user 'guest account' to print
+ guest ok = no
+ writable = no
+ printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+; comment = Temporary file space
+; path = /tmp
+; read only = no
+; public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+; comment = Public Stuff
+; path = /home/samba
+; public = yes
+; writable = yes
+; printable = no
+; write list = @staff
+
+# Other examples.
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+; comment = Fred's Printer
+; valid users = fred
+; path = /homes/fred
+; printer = freds_printer
+; public = no
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+; comment = Fred's Service
+; path = /usr/somewhere/private
+; valid users = fred
+; public = no
+; writable = yes
+; printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+; comment = PC Directories
+; path = /usr/pc/%m
+; public = no
+; writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+; path = /usr/somewhere/else/public
+; public = yes
+; only guest = yes
+; writable = yes
+; printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+; comment = Mary's and Fred's stuff
+; path = /usr/somewhere/shared
+; valid users = mary fred
+; public = no
+; writable = yes
+; printable = no
+; create mask = 0765
--- /dev/null
+diff --git source.old/client/mount.cifs.c source/client/mount.cifs.c
+index 3b56e5f..b7a76c6 100644
+--- source.old/client/mount.cifs.c
++++ source/client/mount.cifs.c
+@@ -56,6 +56,10 @@
+ #endif /* _SAMBA_BUILD_ */
+ #endif /* MOUNT_CIFS_VENDOR_SUFFIX */
+
++#ifdef _SAMBA_BUILD_
++#include "include/config.h"
++#endif
++
+ #ifndef MS_MOVE
+ #define MS_MOVE 8192
+ #endif
+@@ -94,6 +98,8 @@ char * prefixpath = NULL;
+
+ /* like strncpy but does not 0 fill the buffer and always null
+ * terminates. bufsize is the size of the destination buffer */
++
++#ifndef HAVE_STRLCPY
+ static size_t strlcpy(char *d, const char *s, size_t bufsize)
+ {
+ size_t len = strlen(s);
+@@ -104,10 +110,13 @@ static size_t strlcpy(char *d, const char *s, size_t bufsize)
+ d[len] = 0;
+ return ret;
+ }
++#endif
+
+ /* like strncat but does not 0 fill the buffer and always null
+ * terminates. bufsize is the length of the buffer, which should
+ * be one more than the maximum resulting string length */
++
++#ifndef HAVE_STRLCAT
+ static size_t strlcat(char *d, const char *s, size_t bufsize)
+ {
+ size_t len1 = strlen(d);
+@@ -126,6 +135,7 @@ static size_t strlcat(char *d, const char *s, size_t bufsize)
+ }
+ return ret;
+ }
++#endif
+
+ /* BB finish BB
+
DEPENDS = "readline virtual/libiconv"
SRC_URI = "http://samba.org/samba/ftp/stable/samba-${PV}.tar.gz \
- file://configure.patch;patch=1"
+ file://configure.patch;patch=1 \
+ file://config-lfs.patch;patch=1 \
+ file://quota.patch;patch=1;pnum=0 \
+ file://smb.conf \
+ file://init"
S = "${WORKDIR}/samba-${PV}/source"
-inherit autotools
+inherit autotools update-rc.d
-EXTRA_OECONF='--disable-cups --with-readline=${STAGING_LIBDIR}/.. \
+# The file system settings --foodir=dirfoo and overridden unconditionally
+# in the samba config by --with-foodir=dirfoo - even if the --with is not
+# specified! Fix that here. Set the privatedir to /etc/samba/private.
+EXTRA_OECONF='--disable-cups \
+ --with-readline=${STAGING_LIBDIR}/.. \
--with-libiconv=${STAGING_LIBDIR}/.. \
- --without-ads --without-automount --with-smbmount'
+ --without-automount \
+ --with-smbmount \
+ --with-configdir=${sysconfdir}/samba \
+ --with-privatedir=${sysconfdir}/samba/private \
+ --with-lockdir=${localstatedir}/lock \
+ --with-piddir=${localstatedir}/run \
+ --with-logfilebase=${localstatedir}/log \
+ --with-libdir=${libdir} \
+ --with-mandir=${mandir} \
+ --with-swatdir=${datadir}/swat \
+ samba_cv_struct_timespec=yes'
-PACKAGES =+ "libsmbclient libsmbclient-dev cifs cifs-doc smbfs smbfs-doc"
-FILES_smbfs = "${bindir}/smbmount ${bindir}/smbumount ${bindir}/smbmnt ${base_sbindir}/mount.smbfs ${base_sbindir}/mount.smb"
-FILES_smbfs-doc = "${mandir}/man8/smbmount.8 ${mandir}/man8/smbumount.8 ${mandir}/man8/smbmnt.8"
+INITSCRIPT_NAME = "samba"
+# No dependencies, goes in at level 20 (NOTE: take care with the
+# level, later levels put the shutdown later too - see the links
+# in rc6.d, the shutdown must precede network shutdown).
+INITSCRIPT_PARAMS = "defaults"
+CONFFILES_${PN} = "${sysconfdir}/samba/smb.conf"
+
+PACKAGES =+ "libsmbclient libsmbclient-dev cifs cifs-doc smbfs smbfs-doc swat"
FILES_cifs = "${base_sbindir}/mount.cifs ${base_sbindir}/umount.cifs"
FILES_cifs-doc = "${mandir}/man8/mount.cifs.8 ${mandir}/man8/umount.cifs.8"
FILES_libsmbclient = "${libdir}/libsmbclient.so.*"
FILES_libsmbclient-dev = "${libdir}/libsmbclient.so ${includedir}"
+FILES_smbfs = "${bindir}/smbmount ${bindir}/smbumount ${bindir}/smbmnt ${base_sbindir}/mount.smbfs ${base_sbindir}/mount.smb"
+FILES_smbfs-doc = "${mandir}/man8/smbmount.8 ${mandir}/man8/smbumount.8 ${mandir}/man8/smbmnt.8"
+FILES_swat = "${sbindir}/swat ${datadir}/swat ${libdir}/*.msg"
+FILES_${PN} += "${libdir}/vfs/*.so ${libdir}/charset/*.so ${libdir}/*.dat \
+ ${libdir}/auth/*.so ${libdir}/security/*.so"
+FILES_${PN}-dbg += "${libdir}/vfs/.debug/*.so ${libdir}/charset/.debug/*.so \
+ ${libdir}/auth/.debug/*.so ${libdir}/security/.debug/*.so"
do_configure_prepend () {
./script/mkversion.sh
rm -f ${D}${sbindir}/*.old
[ -f ${D}${sbindir}/mount.cifs ] && mv ${D}${sbindir}/mount.cifs ${D}${base_sbindir}/
[ -f ${D}${sbindir}/umount.cifs ] && mv ${D}${sbindir}/umount.cifs ${D}${base_sbindir}/
+
+ install -d "${D}/var/log/samba"
+ install -d "${D}${sysconfdir}/init.d"
+ install -c -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/samba
+ install -d "${D}${sysconfdir}/samba"
+ install -c -m 644 ${WORKDIR}/smb.conf ${D}${sysconfdir}/samba/smb.conf
+ install -d ${D}/var/spool/samba
}
do_stage() {
require samba.inc
-inherit update-rc.d
PR = "r4"
-SRC_URI += "file://config-lfs.patch;patch=1 \
- file://init \
- file://quota.patch;patch=1;pnum=0 \
- file://cifs.patch;patch=1 \
- "
+SRC_URI += "file://cifs.patch;patch=1 \
+ "
-INITSCRIPT_NAME = "samba"
-# No dependencies, goes in at level 20 (NOTE: take care with the
-# level, later levels put the shutdown later too - see the links
-# in rc6.d, the shutdown must precede network shutdown).
-INITSCRIPT_PARAMS = "defaults"
-CONFFILES_${PN} = "${sysconfdir}/samba/smb.conf"
-
-# The file system settings --foodir=dirfoo and overridden unconditionally
-# in the samba config by --with-foodir=dirfoo - even if the --with is not
-# specified! Fix that here. Set the privatedir to /etc/samba/private.
EXTRA_OECONF += "\
- samba_cv_struct_timespec=yes \
- --with-configdir=${sysconfdir}/samba \
- --with-privatedir=${sysconfdir}/samba/private \
- --with-lockdir=${localstatedir}/lock \
- --with-piddir=${localstatedir}/run \
- --with-logfilebase=${localstatedir}/log \
- --with-libdir=${libdir} \
- --with-mandir=${mandir} \
- --with-swatdir=${datadir}/swat \
- "
+ --without-ads \
+ "
do_compile () {
oe_runmake proto_exists
${CC} client/mount.cifs.c -o mount.cifs
}
-do_install_append() {
- install -d "${D}${localstatedir}/log"
- install -d "${D}${sysconfdir}/init.d"
- install -c -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/samba
- install -d "${D}${sysconfdir}/samba"
- install -c -m 644 ../examples/smb.conf.default ${D}${sysconfdir}/samba/smb.conf
-}
-
do_stage() {
install -m 0644 include/libsmbclient.h ${STAGING_INCDIR}
oe_libinstall -C bin -a -so libsmbclient ${STAGING_LIBDIR}
}
-
-PACKAGES =+ "swat"
-
-FILES_swat = "${sbindir}/swat ${datadir}/swat ${libdir}/*.msg"
-FILES_${PN} += "${libdir}/vfs/*.so ${libdir}/charset/*.so ${libdir}/*.dat ${libdir}/auth/*.so"
-#
-# bug fix for samba.inc:
-FILES_cifs-doc += "${mandir}/man8/mount.cifs.8"
require samba.inc
-inherit update-rc.d
-PR = "r1"
+PR = "r2"
-SRC_URI += "file://config-lfs.patch;patch=1 \
- file://quota.patch;patch=1;pnum=0 \
- file://init \
- file://smb.conf \
- "
+SRC_URI_append_linux-uclibc = " \
+ file://uclibc-strlcpy-strlcat.patch;patch=1"
+SRC_URI_append_linux-uclibcgnueabi = " \
+ file://uclibc-strlcpy-strlcat.patch;patch=1"
-# file://cifs.patch;patch=1 \
-
-INITSCRIPT_NAME = "samba"
-# No dependencies, goes in at level 20 (NOTE: take care with the
-# level, later levels put the shutdown later too - see the links
-# in rc6.d, the shutdown must precede network shutdown).
-INITSCRIPT_PARAMS = "defaults"
-CONFFILES_${PN} = "${sysconfdir}/samba/smb.conf"
-
-# The file system settings --foodir=dirfoo and overridden unconditionally
-# in the samba config by --with-foodir=dirfoo - even if the --with is not
-# specified! Fix that here. Set the privatedir to /etc/samba/private.
EXTRA_OECONF += "\
+ --without-ads \
SMB_BUILD_CC_NEGATIVE_ENUM_VALUES=yes \
- samba_cv_struct_timespec=yes \
- --with-configdir=${sysconfdir}/samba \
- --with-privatedir=${sysconfdir}/samba/private \
- --with-lockdir=${localstatedir}/lock \
- --with-piddir=${localstatedir}/run \
- --with-logfilebase=${localstatedir}/log \
- --with-libdir=${libdir} \
- --with-mandir=${mandir} \
- --with-swatdir=${datadir}/swat \
"
-do_install_append() {
- install -d "${D}/var/log/samba"
- install -d "${D}${sysconfdir}/init.d"
- install -c -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/samba
- install -d "${D}${sysconfdir}/samba"
- install -c -m 644 ${WORKDIR}/smb.conf ${D}${sysconfdir}/samba/smb.conf
- install -d ${D}/var/spool/samba
-}
-
do_stage() {
install -m 0644 include/libsmbclient.h ${STAGING_INCDIR}
oe_libinstall -C bin -a -so libsmbclient ${STAGING_LIBDIR}
}
-
-PACKAGES =+ "swat"
-
-FILES_swat = "${sbindir}/swat ${datadir}/swat ${libdir}/*.msg"
-FILES_${PN} += "${libdir}/vfs/*.so ${libdir}/charset/*.so ${libdir}/*.dat \
- ${libdir}/auth/*.so ${libdir}/security/*.so"
-FILES_${PN}-dbg += "${libdir}/vfs/.debug/*.so ${libdir}/charset/.debug/*.so \
- ${libdir}/auth/.debug/*.so ${libdir}/security/.debug/*.so"
-
-#
-# bug fix for samba.inc:
-FILES_cifs-doc += "${mandir}/man8/mount.cifs.8"
require samba.inc
-inherit update-rc.d
-PR = "r0"
-
-SRC_URI += "file://config-lfs.patch;patch=1 \
- file://quota.patch;patch=1;pnum=0 \
- file://config-h.patch;patch=1 \
+PR = "r1"
+DEPENDS += " openldap krb5"
+SRC_URI += "file://config-h.patch;patch=1 \
file://mtab.patch;patch=1 \
- file://init \
- file://smb.conf \
"
-# file://cifs.patch;patch=1 \
-
-INITSCRIPT_NAME = "samba"
-# No dependencies, goes in at level 20 (NOTE: take care with the
-# level, later levels put the shutdown later too - see the links
-# in rc6.d, the shutdown must precede network shutdown).
-INITSCRIPT_PARAMS = "defaults"
-CONFFILES_${PN} = "${sysconfdir}/samba/smb.conf"
-
-# The file system settings --foodir=dirfoo and overridden unconditionally
-# in the samba config by --with-foodir=dirfoo - even if the --with is not
-# specified! Fix that here. Set the privatedir to /etc/samba/private.
EXTRA_OECONF += "\
SMB_BUILD_CC_NEGATIVE_ENUM_VALUES=yes \
samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \
- samba_cv_struct_timespec=yes \
linux_getgrouplist_ok=no \
samba_cv_HAVE_BROKEN_GETGROUPS=no \
samba_cv_HAVE_FTRUNCATE_EXTEND=yes \
- ac_cv_path_KRB5CONFIG=no \
+ ac_cv_path_KRB5CONFIG=${STAGING_BINDIR_CROSS}/krb5-config \
samba_cv_have_setresuid=yes \
samba_cv_have_setresgid=yes \
- --with-configdir=${sysconfdir}/samba \
- --with-privatedir=${sysconfdir}/samba/private \
- --with-lockdir=${localstatedir}/lock \
- --with-piddir=${localstatedir}/run \
- --with-logfilebase=${localstatedir}/log \
- --with-libdir=${libdir} \
- --with-mandir=${mandir} \
- --with-swatdir=${datadir}/swat \
+ samba_cv_HAVE_WRFILE_KEYTAB=yes \
+ smb_krb5_cv_enctype_to_string_takes_krb5_context_arg=yes \
+ smb_krb5_cv_enctype_to_string_takes_size_t_arg=yes \
+ --with-krb5=${STAGING_LIBDIR} \
+ --with-ads \
"
do_configure() {
oe_runconf
}
-
-do_install_append() {
- install -d "${D}/var/log/samba"
- install -d "${D}${sysconfdir}/init.d"
- install -c -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/samba
- install -d "${D}${sysconfdir}/samba"
- install -c -m 644 ${WORKDIR}/smb.conf ${D}${sysconfdir}/samba/smb.conf
- install -d ${D}/var/spool/samba
-}
-
-PACKAGES =+ "swat"
-
-FILES_swat = "${sbindir}/swat ${datadir}/swat ${libdir}/*.msg"
-FILES_${PN} += "${libdir}/vfs/*.so ${libdir}/charset/*.so ${libdir}/*.dat \
- ${libdir}/auth/*.so ${libdir}/security/*.so"
-FILES_${PN}-dbg += "${libdir}/vfs/.debug/*.so ${libdir}/charset/.debug/*.so \
- ${libdir}/auth/.debug/*.so ${libdir}/security/.debug/*.so"
-
-#
-# bug fix for samba.inc:
-FILES_cifs-doc += "${mandir}/man8/mount.cifs.8"
git.openpandora.org / openembedded.git / commitdiff