global: Migrate CONFIG_PL011_CLOCK to CFG

Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/README b/README
index 0561835..8354cf5 100644 (file)
--- a/README
+++ b/README
@@ -413,7 +413,7 @@ The following options need to be configured:
                                        controller register space
 
 - Serial Ports:
-               CONFIG_PL011_CLOCK
+               CFG_PL011_CLOCK
 
                If you have Amba PrimeCell PL011 UARTs, set this variable to
                the clock speed of the UARTs.

diff --git a/arch/arm/cpu/armv7/s5p4418/cpu.c b/arch/arm/cpu/armv7/s5p4418/cpu.c
index 3baa761..7ba9c0b 100644 (file)
--- a/arch/arm/cpu/armv7/s5p4418/cpu.c
+++ b/arch/arm/cpu/armv7/s5p4418/cpu.c
@@ -64,7 +64,7 @@ static void serial_device_init(void)
 
        /* set clock   */
        clk_disable(clk);
-       clk_set_rate(clk, CONFIG_PL011_CLOCK);
+       clk_set_rate(clk, CFG_PL011_CLOCK);
        clk_enable(clk);
 }
 #endif

diff --git a/board/armltd/total_compute/total_compute.c b/board/armltd/total_compute/total_compute.c
index b7772f7..53941b5 100644 (file)
--- a/board/armltd/total_compute/total_compute.c
+++ b/board/armltd/total_compute/total_compute.c
@@ -13,7 +13,7 @@
 static const struct pl01x_serial_plat serial_plat = {
        .base = UART0_BASE,
        .type = TYPE_PL011,
-       .clock = CONFIG_PL011_CLOCK,
+       .clock = CFG_PL011_CLOCK,
 };
 
 U_BOOT_DRVINFO(total_compute_serials) = {

diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index 4ca544f..99fb67e 100644 (file)
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -29,7 +29,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static const struct pl01x_serial_plat serial_plat = {
        .base = V2M_UART0,
        .type = TYPE_PL011,
-       .clock = CONFIG_PL011_CLOCK,
+       .clock = CFG_PL011_CLOCK,
 };
 
 U_BOOT_DRVINFO(vexpress_serials) = {

diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index d3c3d3e..dd28819 100644 (file)
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -193,7 +193,7 @@ static void pl01x_serial_init_baud(int baudrate)
 
 #if defined(CONFIG_PL011_SERIAL)
        pl01x_type = TYPE_PL011;
-       clock = CONFIG_PL011_CLOCK;
+       clock = CFG_PL011_CLOCK;
 #endif
        base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
 
@@ -343,8 +343,8 @@ static const struct udevice_id pl01x_serial_id[] ={
        {}
 };
 
-#ifndef CONFIG_PL011_CLOCK
-#define CONFIG_PL011_CLOCK 0
+#ifndef CFG_PL011_CLOCK
+#define CFG_PL011_CLOCK 0
 #endif
 
 int pl01x_serial_of_to_plat(struct udevice *dev)
@@ -359,7 +359,7 @@ int pl01x_serial_of_to_plat(struct udevice *dev)
                return -EINVAL;
 
        plat->base = addr;
-       plat->clock = dev_read_u32_default(dev, "clock", CONFIG_PL011_CLOCK);
+       plat->clock = dev_read_u32_default(dev, "clock", CFG_PL011_CLOCK);
        ret = clk_get_by_index(dev, 0, &clk);
        if (!ret) {
                ret = clk_enable(&clk);

diff --git a/include/configs/corstone1000.h b/include/configs/corstone1000.h
index 8aec52d..3347c11 100644 (file)
--- a/include/configs/corstone1000.h
+++ b/include/configs/corstone1000.h
@@ -16,7 +16,7 @@
 
 #define V2M_BASE               0x80000000
 
-#define CONFIG_PL011_CLOCK     50000000
+#define CFG_PL011_CLOCK        50000000
 
 /* Physical Memory Map */
 #define PHYS_SDRAM_1           (V2M_BASE)

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 76e6054..97bb439 100644 (file)
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -8,7 +8,7 @@
 
 #define CFG_SYS_BOOTMAPSZ              (16 << 20)
 
-#define CONFIG_PL011_CLOCK             150000000
+#define CFG_PL011_CLOCK                150000000
 
 /*
  * Miscellaneous configurable options

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index c1a98fd..f8a20ea 100644 (file)
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -39,7 +39,7 @@
 
 
 /* Serial Port */
-#define CONFIG_PL011_CLOCK             (get_bus_freq(0) / 4)
+#define CFG_PL011_CLOCK                (get_bus_freq(0) / 4)
 #define CFG_SYS_SERIAL0                0x21c0000
 #define CFG_SYS_SERIAL1                0x21d0000
 #define CFG_SYS_SERIAL2                0x21e0000

diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 32e0e06..90cb1a5 100644 (file)
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -77,7 +77,7 @@
  * DUART Serial Driver.
  * Conflicts with AUART driver which can be set by board.
  */
-#define CONFIG_PL011_CLOCK             24000000
+#define CFG_PL011_CLOCK                24000000
 #define CONFIG_PL01x_PORTS             { (void *)MXS_UARTDBG_BASE }
 /* Default baudrate can be overridden by board! */
 

diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h
index bfe559f..0e7d019 100644 (file)
--- a/include/configs/s5p4418_nanopi2.h
+++ b/include/configs/s5p4418_nanopi2.h
@@ -76,7 +76,7 @@
 /*-----------------------------------------------------------------------
  * serial console configuration
  */
-#define CONFIG_PL011_CLOCK             50000000
+#define CFG_PL011_CLOCK                50000000
 #define CONFIG_PL01x_PORTS             {(void *)PHY_BASEADDR_UART0, \
                                         (void *)PHY_BASEADDR_UART1, \
                                         (void *)PHY_BASEADDR_UART2, \

diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index e65d623..350cc69 100644 (file)
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -31,7 +31,7 @@
 
 /* Serial (pl011)       */
 #define UART_CLK                       (62500000)
-#define CONFIG_PL011_CLOCK             UART_CLK
+#define CFG_PL011_CLOCK                UART_CLK
 #define CONFIG_PL01x_PORTS             {(void *)(0x2a400000)}
 
 /* Support MTD */

diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 8ba4054..2bca86b 100644 (file)
--- a/include/configs/thunderx_88xx.h
+++ b/include/configs/thunderx_88xx.h
@@ -17,7 +17,7 @@
 
 /* PL011 Serial Configuration */
 
-#define CONFIG_PL011_CLOCK             24000000
+#define CFG_PL011_CLOCK                24000000
 
 /* Generic Interrupt Controller Definitions */
 #define GICD_BASE                      (0x801000000000)

diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h
index e007be8..436bf62 100644 (file)
--- a/include/configs/total_compute.h
+++ b/include/configs/total_compute.h
@@ -14,7 +14,7 @@
 #define UART0_BASE             0x7ff80000
 
 /* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK     7372800
+#define CFG_PL011_CLOCK        7372800
 
 /* Miscellaneous configurable options */
 

diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h
index 87b8c5d..43f7e45 100644 (file)
--- a/include/configs/vexpress_aemv8.h
+++ b/include/configs/vexpress_aemv8.h
@@ -86,9 +86,9 @@
 
 /* PL011 Serial Configuration */
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_PL011_CLOCK             7372800
+#define CFG_PL011_CLOCK                7372800
 #else
-#define CONFIG_PL011_CLOCK             24000000
+#define CFG_PL011_CLOCK                24000000
 #endif
 
 /* Physical Memory Map */

diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 705a941..3fc70de 100644 (file)
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -116,7 +116,7 @@
 #define CFG_SYS_TIMER_COUNTER  (V2M_TIMER01 + 0x4)
 
 /* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK             24000000
+#define CFG_PL011_CLOCK                24000000
 #define CONFIG_PL01x_PORTS             {(void *)CFG_SYS_SERIAL0, \
                                         (void *)CFG_SYS_SERIAL1}