--- /dev/null
+From 69224adc54640f5fe47c5303ecbf99cb58ac8b43 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 16:48:52 +0100
+Subject: [PATCH] ts72xx_base
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+- patch: allow to force nF bit in control reg
+- small fix: drivers/input/keyboard/ep93xx_keypad.c
+- register pwm1
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/Kconfig | 1 +
+ arch/arm/include/asm/memory.h | 2 +
+ arch/arm/mach-ep93xx/Kconfig | 9 ++
+ arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 11 ++
+ arch/arm/mach-ep93xx/include/mach/memory.h | 28 +++++
+ arch/arm/mach-ep93xx/include/mach/ts72xx.h | 125 +++++++++++++++++++++--
+ arch/arm/mach-ep93xx/ts72xx.c | 40 +++++++-
+ arch/arm/mm/proc-arm920.S | 5 +-
+ drivers/input/keyboard/ep93xx_keypad.c | 1 +
+ 9 files changed, 210 insertions(+), 12 deletions(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 1c4119c..0f1d52f 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -288,6 +288,7 @@ config ARCH_EP93XX
+ select CPU_ARM920T
+ select ARM_AMBA
+ select ARM_VIC
++ select ARCH_SPARSEMEM_ENABLE
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select COMMON_CLKDEV
+diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
+index cefedf0..bc2ff8b 100644
+--- a/arch/arm/include/asm/memory.h
++++ b/arch/arm/include/asm/memory.h
+@@ -125,8 +125,10 @@
+ * private definitions which should NOT be used outside memory.h
+ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
++#ifndef __virt_to_phys
+ #define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+ #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
++#endif
+
+ /*
+ * Convert a physical address to a Page Frame Number and back
+diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
+index 9167c3d..335b0bb 100644
+--- a/arch/arm/mach-ep93xx/Kconfig
++++ b/arch/arm/mach-ep93xx/Kconfig
+@@ -7,6 +7,15 @@ config CRUNCH
+ help
+ Enable kernel support for MaverickCrunch.
+
++config CR1_NFBIT
++ bool "Turn on nF bit in ControlRegister 1"
++ help
++ Say 'Y' here to force the nF bit on. Usually this is set
++ by the bootrom. If it is not set, then the CPU core will
++ run from HCLK instead of FCLK, and performance will suffer.
++ If you see BogoMIPS of about 1/4 of your CPU clock, try
++ turning this on; your performance should double.
++
+ comment "EP93xx Platforms"
+
+ choice
+diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+index b1f937e..358d8ff 100644
+--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
++++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+@@ -111,16 +111,26 @@
+ #define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
+
+ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
++#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
++#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
+
+ #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
+ #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+ #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
++#define EP93XX_GPIO_F_INT_DEBOUNCE EP93XX_GPIO_REG(0x64)
+ #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
++#define EP93XX_GPIO_A_INT_DEBOUNCE EP93XX_GPIO_REG(0xa8)
+ #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
++#define EP93XX_GPIO_B_INT_DEBOUNCE EP93XX_GPIO_REG(0xc4)
+ #define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
+
++#define EP93XX_GPIO_A_DATA EP93XX_GPIO_REG(0x00)
++#define EP93XX_GPIO_A_DIRECTION EP93XX_GPIO_REG(0x10)
++#define EP93XX_GPIO_B_DATA EP93XX_GPIO_REG(0x04)
++
+ #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
+
++#define EP93XX_SPI_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000a0000)
+ #define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
+
+ #define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
+@@ -220,6 +230,7 @@
+ #define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
+ #define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
+ #define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
++#define EP93XX_SYSCON_CHIPID EP93XX_SYSCON_REG(0x94)
+ #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
+
+ #define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
+diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
+index 554064e..78eaacf 100644
+--- a/arch/arm/mach-ep93xx/include/mach/memory.h
++++ b/arch/arm/mach-ep93xx/include/mach/memory.h
+@@ -19,4 +19,32 @@
+ #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+ #endif
+
++/*
++ * Non-linear mapping like so:
++ * phys => virt
++ * 0x00000000 => 0xc0000000
++ * 0x01000000 => 0xc1000000
++ * 0x04000000 => 0xc4000000
++ * 0x05000000 => 0xc5000000
++ * 0xe0000000 => 0xc8000000
++ * 0xe1000000 => 0xc9000000
++ * 0xe4000000 => 0xcc000000
++ * 0xe5000000 => 0xcd000000
++ *
++ * As suggested here: http://marc.info/?l=linux-arm&m=122754446724900&w=2
++ *
++ * Note that static inline functions won't work here because
++ * arch/arm/include/asm/memory.h uses "#ifndef __virt_to_phys" to check whether to
++ * use generic functions or not.
++ */
++
++#define __phys_to_virt(p) \
++ (((p) & 0x07ffffff) | (((p) & 0xe0000000) ? 0x08000000 : 0) | PAGE_OFFSET)
++
++#define __virt_to_phys(v) \
++ (((v) & 0x07ffffff) | (((v) & 0x08000000) ? 0xe0000000 : 0 ))
++
++#define SECTION_SIZE_BITS 24
++#define MAX_PHYSMEM_BITS 32
++
+ #endif
+diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+index 3bd934e..006c5a2 100644
+--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
++++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+@@ -8,21 +8,35 @@
+ * virt phys size
+ * febff000 22000000 4K model number register
+ * febfe000 22400000 4K options register
+- * febfd000 22800000 4K options register #2
++ * febfd000 22800000 4K options register #2 (JP6 and TS-9420 flags)
+ * febfc000 [67]0000000 4K NAND data register
+ * febfb000 [67]0400000 4K NAND control register
+ * febfa000 [67]0800000 4K NAND busy register
+ * febf9000 10800000 4K TS-5620 RTC index register
+ * febf8000 11700000 4K TS-5620 RTC data register
++ * febf7000 23800000 4K CPLD watchdog (control register)
++ * febf6000 23c00000 4K CPLD watchdog (feed register)
++ * febf5000 23400000 4K PLD version (3 bits)
++ * febf4000 22c00000 4K RS-485 control register
++ * febf3000 23000000 4K RS-485 mode register
++ * febf2000 10800000 4K jumpers/max197 busy bit/COM1 dcd register (8-bit, read only)
++ * febf1000 10f00000 4K max197 sample/control register (16-bit read/8-bit write)
++ * febf0000 11e00000 4K PC/104 8-bit I/O
++ * febef000 21e00000 4K PC/104 16-bit I/O
++ * fea00000 11a00000 1MB PC/104 8-bit memory
++ * fe900000 21a00000 1MB PC/104 16-bit memory
+ */
+
+ #define TS72XX_MODEL_PHYS_BASE 0x22000000
+ #define TS72XX_MODEL_VIRT_BASE 0xfebff000
+ #define TS72XX_MODEL_SIZE 0x00001000
+
+-#define TS72XX_MODEL_TS7200 0x00
+-#define TS72XX_MODEL_TS7250 0x01
+-#define TS72XX_MODEL_TS7260 0x02
++#define TS7XXX_MODEL_TS7200 0x00
++#define TS7XXX_MODEL_TS7250 0x01
++#define TS7XXX_MODEL_TS7260 0x02
++#define TS7XXX_MODEL_TS7300 0x03
++#define TS7XXX_MODEL_TS7400 0x04
++#define TS7XXX_MODEL_MASK 0x07
+
+
+ #define TS72XX_OPTIONS_PHYS_BASE 0x22400000
+@@ -50,12 +64,13 @@
+ #define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000
+ #define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000
+ #define TS72XX_NAND_CONTROL_SIZE 0x00001000
++#define TS72XX_NAND_CONTROL_OFFSET 0x00400000
+
+ #define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000
+ #define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000
+ #define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000
+ #define TS72XX_NAND_BUSY_SIZE 0x00001000
+-
++#define TS72XX_NAND_BUSY_OFFSET 0x00800000
+
+ #define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000
+ #define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000
+@@ -65,33 +80,123 @@
+ #define TS72XX_RTC_DATA_PHYS_BASE 0x11700000
+ #define TS72XX_RTC_DATA_SIZE 0x00001000
+
++#define TS72XX_WATCHDOG_CONTROL_VIRT_BASE 0xfebf7000
++#define TS72XX_WATCHDOG_CONTROL_PHYS_BASE 0x23800000
++#define TS72XX_WATCHDOG_CONTROL_SIZE 0x00001000
++
++#define TS72XX_WATCHDOG_FEED_VIRT_BASE 0xfebf6000
++#define TS72XX_WATCHDOG_FEED_PHYS_BASE 0x23c00000
++#define TS72XX_WATCHDOG_FEED_SIZE 0x00001000
++
++#define TS72XX_PLD_VERSION_VIRT_BASE 0xfebf5000
++#define TS72XX_PLD_VERSION_PHYS_BASE 0x23400000
++#define TS72XX_PLD_VERSION_SIZE 0x00001000
++
++#define TS72XX_RS485_CONTROL_VIRT_BASE 0xfebf4000
++#define TS72XX_RS485_CONTROL_PHYS_BASE 0x22c00000
++#define TS72XX_RS485_CONTROL_SIZE 0x00001000
++
++#define TS72XX_RS485_MODE_VIRT_BASE 0xfebf3000
++#define TS72XX_RS485_MODE_PHYS_BASE 0x23000000
++#define TS72XX_RS485_MODE_SIZE 0x00001000
++
++#define TS72XX_JUMPERS_MAX197_VIRT_BASE 0xfebf2000
++#define TS72XX_JUMPERS_MAX197_PHYS_BASE 0x10800000
++#define TS72XX_JUMPERS_MAX197_SIZE 0x00001000
++
++#define TS72XX_MAX197_SAMPLE_VIRT_BASE 0xfebf1000
++#define TS72XX_MAX197_SAMPLE_PHYS_BASE 0x10f00000
++#define TS72XX_MAX197_SAMPLE_SIZE 0x00001000
++
++#define TS72XX_RS485_AUTO485FD 1
++#define TS72XX_RS485_AUTO485HD 2
++#define TS72XX_RS485_MODE_RS232 0x00
++#define TS72XX_RS485_MODE_FD 0x01
++#define TS72XX_RS485_MODE_9600_HD 0x04
++#define TS72XX_RS485_MODE_19200_HD 0x05
++#define TS72XX_RS485_MODE_57600_HD 0x06
++#define TS72XX_RS485_MODE_115200_HD 0x07
++
++
++#define TS72XX_PC104_8BIT_IO_VIRT_BASE 0xfebf0000
++#define TS72XX_PC104_8BIT_IO_PHYS_BASE 0x11e00000
++#define TS72XX_PC104_8BIT_IO_SIZE 0x00001000
++#define TS72XX_PC104_8BIT_MEM_VIRT_BASE 0xfea00000
++#define TS72XX_PC104_8BIT_MEM_PHYS_BASE 0x11a00000
++#define TS72XX_PC104_8BIT_MEM_SIZE 0x00100000
++
++#define TS72XX_PC104_16BIT_IO_VIRT_BASE 0xfebef000
++#define TS72XX_PC104_16BIT_IO_PHYS_BASE 0x21e00000
++#define TS72XX_PC104_16BIT_IO_SIZE 0x00001000
++#define TS72XX_PC104_16BIT_MEM_VIRT_BASE 0xfe900000
++#define TS72XX_PC104_16BIT_MEM_PHYS_BASE 0x21a00000
++#define TS72XX_PC104_16BIT_MEM_SIZE 0x00100000
++
++/*
++ * TS7200 CF memory map:
++ *
++ * phys size description
++ * 11000000 7 CF registers (8-bit each), starting at 11000001
++ * 10400006 2 CF aux registers (8-bit)
++ * 21000000 2 CF data register (16-bit)
++ */
++
++#define TS7200_CF_CMD_PHYS_BASE 0x11000000
++#define TS7200_CF_AUX_PHYS_BASE 0x10400006
++#define TS7200_CF_DATA_PHYS_BASE 0x21000000
+
+ #ifndef __ASSEMBLY__
+
+ static inline int board_is_ts7200(void)
+ {
+- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
++ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
++ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7200;
+ }
+
+ static inline int board_is_ts7250(void)
+ {
+- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
++ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
++ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7250;
+ }
+
+ static inline int board_is_ts7260(void)
+ {
+- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
++ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
++ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7260;
++}
++
++static inline int board_is_ts7400(void)
++{
++ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
++ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7400;
+ }
+
+ static inline int is_max197_installed(void)
+ {
+ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+- TS72XX_OPTIONS_MAX197);
++ TS72XX_OPTIONS_MAX197);
+ }
+
+ static inline int is_ts9420_installed(void)
+ {
+ return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+- TS72XX_OPTIONS2_TS9420);
++ TS72XX_OPTIONS2_TS9420);
++}
++
++static inline int is_rs485_installed(void)
++{
++ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
++ TS72XX_OPTIONS_COM2_RS485);
++}
++
++static inline int get_ts72xx_pld_version(void)
++{
++ return (__raw_readb(TS72XX_PLD_VERSION_VIRT_BASE) & 0x7);
++}
++
++/* User jumper */
++static inline int is_jp6_set(void)
++{
++ return (__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & 0x1);
+ }
+ #endif
+diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
+index 259f782..4a97ff7 100644
+--- a/arch/arm/mach-ep93xx/ts72xx.c
++++ b/arch/arm/mach-ep93xx/ts72xx.c
+@@ -51,7 +51,36 @@ static struct map_desc ts72xx_io_desc[] __initdata = {
+ .pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
+ .length = TS72XX_RTC_DATA_SIZE,
+ .type = MT_DEVICE,
+- }
++ },
++ /* Use this for debug only. Each device will map its own PC/104 address space */
++ ///* PC/104 (8-bit) I/O bus */
++ //{
++ // .virtual = TS72XX_PC104_8BIT_IO_VIRT_BASE,
++ // .pfn = __phys_to_pfn(TS72XX_PC104_8BIT_IO_PHYS_BASE),
++ // .length = TS72XX_PC104_8BIT_IO_SIZE,
++ // .type = MT_DEVICE,
++ //},
++ ///* PC/104 (16-bit) I/O bus */
++ //{
++ // .virtual = TS72XX_PC104_16BIT_IO_VIRT_BASE,
++ // .pfn = __phys_to_pfn(TS72XX_PC104_16BIT_IO_PHYS_BASE),
++ // .length = TS72XX_PC104_16BIT_IO_SIZE,
++ // .type = MT_DEVICE,
++ //},
++ ///* PC/104 (8-bit) MEM bus */
++ //{
++ // .virtual = TS72XX_PC104_8BIT_MEM_VIRT_BASE,
++ // .pfn = __phys_to_pfn(TS72XX_PC104_8BIT_MEM_PHYS_BASE),
++ // .length = TS72XX_PC104_8BIT_MEM_SIZE,
++ // .type = MT_DEVICE,
++ //},
++ ///* PC/104 (16-bit) MEM bus */
++ //{
++ // .virtual = TS72XX_PC104_16BIT_MEM_VIRT_BASE,
++ // .pfn = __phys_to_pfn(TS72XX_PC104_16BIT_MEM_PHYS_BASE),
++ // .length = TS72XX_PC104_16BIT_MEM_SIZE,
++ // .type = MT_DEVICE,
++ //}
+ };
+
+ static struct map_desc ts72xx_nand_io_desc[] __initdata = {
+@@ -140,6 +169,9 @@ static void __init ts72xx_register_flash(void)
+ platform_device_register(&ts72xx_flash);
+ }
+
++/*************************************************************************
++ * RTC
++ *************************************************************************/
+ static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
+ {
+ __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
+@@ -166,6 +198,9 @@ static struct platform_device ts72xx_rtc_device = {
+ .num_resources = 0,
+ };
+
++/*************************************************************************
++ * Ethernet
++ *************************************************************************/
+ static struct ep93xx_eth_data ts72xx_eth_data = {
+ .phy_id = 1,
+ };
+@@ -177,6 +212,9 @@ static void __init ts72xx_init_machine(void)
+ platform_device_register(&ts72xx_rtc_device);
+
+ ep93xx_register_eth(&ts72xx_eth_data, 1);
++
++ /* PWM1 is DIO_6 on TS-72xx header */
++ ep93xx_register_pwm(0, 1);
+ }
+
+ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
+diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
+index 2b7c197..f85476b 100644
+--- a/arch/arm/mm/proc-arm920.S
++++ b/arch/arm/mm/proc-arm920.S
+@@ -198,7 +198,7 @@ ENTRY(arm920_coherent_kern_range)
+ */
+ ENTRY(arm920_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
++1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+@@ -373,6 +373,9 @@ __arm920_setup:
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ bic r0, r0, r5
+ orr r0, r0, r6
++#ifdef CONFIG_CR1_NFBIT
++ orr r0, r0, #0x40000000 @ set nF
++#endif
+ mov pc, lr
+ .size __arm920_setup, . - __arm920_setup
+
+diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
+index 181d30e..0012907 100644
+--- a/drivers/input/keyboard/ep93xx_keypad.c
++++ b/drivers/input/keyboard/ep93xx_keypad.c
+@@ -23,6 +23,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/interrupt.h>
+ #include <linux/input.h>
++#include <linux/io.h>
+ #include <linux/clk.h>
+
+ #include <mach/hardware.h>
+--
+1.6.0.4
+
--- /dev/null
+From 88876d29c602759651b448912627ebfae9d12cf6 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:03:17 +0100
+Subject: [PATCH] ts72xx_force_machine-id
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/kernel/head.S | 3 +++
+ arch/arm/mach-ep93xx/Kconfig | 7 +++++++
+ 2 files changed, 10 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
+index 38ccbe1..c2e4514 100644
+--- a/arch/arm/kernel/head.S
++++ b/arch/arm/kernel/head.S
+@@ -82,6 +82,9 @@ ENTRY(stext)
+ bl __lookup_processor_type @ r5=procinfo r9=cpuid
+ movs r10, r5 @ invalid processor (r5=0)?
+ beq __error_p @ yes, error 'p'
++#ifdef CONFIG_MACH_TS72XX_FORCE_MACHINEID
++ ldr r1, =0x2a1
++#endif
+ bl __lookup_machine_type @ r5=machinfo
+ movs r8, r5 @ invalid machine (r5=0)?
+ beq __error_a @ yes, error 'a'
+diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
+index 335b0bb..049c9dd 100644
+--- a/arch/arm/mach-ep93xx/Kconfig
++++ b/arch/arm/mach-ep93xx/Kconfig
+@@ -191,6 +191,13 @@ config EP93XX_EARLY_UART3
+
+ endchoice
+
++config MACH_TS72XX_FORCE_MACHINEID
++ bool "Force Machine ID"
++ depends on MACH_TS72XX
++ help
++ Say 'Y' here to force Machine ID to 0x2A1 (MACH_TYPE_TS72XX legacy value)
++ In early days Technologic Systems fixed the 0x163 value in redboot.
++
+ endmenu
+
+ endif
+--
+1.6.0.4
+
--- /dev/null
+From 3ce6628293a97c7fcbec52d6889338d3dbdbd595 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:07:14 +0100
+Subject: [PATCH] ep93xx_cpuinfo
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/kernel/setup.c | 9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index c6c57b6..29d5f4f 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -860,6 +860,15 @@ static int c_show(struct seq_file *m, void *v)
+ seq_puts(m, "\n");
+
+ seq_printf(m, "Hardware\t: %s\n", machine_name);
++
++ #if defined(CONFIG_ARCH_EP93XX)
++ #include <mach/io.h>
++ #include <mach/ep93xx-regs.h>
++ system_rev = *((unsigned int *)EP93XX_SYSCON_CHIPID) >> 28;
++ system_serial_low = *((unsigned int *)EP93XX_SECURITY_UNIQID);
++ system_serial_high = 0;
++ #endif
++
+ seq_printf(m, "Revision\t: %04x\n", system_rev);
+ seq_printf(m, "Serial\t\t: %08x%08x\n",
+ system_serial_high, system_serial_low);
+--
+1.6.0.4
+
--- /dev/null
+From c46befec6d609225589895559e3ffa165368e90e Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:11:19 +0100
+Subject: [PATCH] ts72xx_sbcinfo
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/mach-ep93xx/Kconfig | 7 ++
+ arch/arm/mach-ep93xx/Makefile | 1 +
+ arch/arm/mach-ep93xx/ts72xx.c | 5 +
+ arch/arm/mach-ep93xx/ts72xx_sbcinfo.c | 156 +++++++++++++++++++++++++++++++++
+ 4 files changed, 169 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-ep93xx/ts72xx_sbcinfo.c
+
+diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
+index 049c9dd..34d2c3b 100644
+--- a/arch/arm/mach-ep93xx/Kconfig
++++ b/arch/arm/mach-ep93xx/Kconfig
+@@ -198,6 +198,13 @@ config MACH_TS72XX_FORCE_MACHINEID
+ Say 'Y' here to force Machine ID to 0x2A1 (MACH_TYPE_TS72XX legacy value)
+ In early days Technologic Systems fixed the 0x163 value in redboot.
+
++config MACH_TS72XX_SBCINFO
++ tristate "Add procfs /proc/driver/sbcinfo"
++ depends on MACH_TS72XX
++ help
++ Say 'Y' to add a procfs entry containing some information
++ related to Technologic Systems TS-72xx SBC.
++
+ endmenu
+
+ endif
+diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
+index eae6199..c2451e6 100644
+--- a/arch/arm/mach-ep93xx/Makefile
++++ b/arch/arm/mach-ep93xx/Makefile
+@@ -11,3 +11,4 @@ obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
+ obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+ obj-$(CONFIG_MACH_MICRO9) += micro9.o
+ obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
++obj-$(CONFIG_MACH_TS72XX_SBCINFO) += ts72xx_sbcinfo.o
+diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
+index 4a97ff7..2c0af20 100644
+--- a/arch/arm/mach-ep93xx/ts72xx.c
++++ b/arch/arm/mach-ep93xx/ts72xx.c
+@@ -32,6 +32,11 @@ static struct map_desc ts72xx_io_desc[] __initdata = {
+ .length = TS72XX_MODEL_SIZE,
+ .type = MT_DEVICE,
+ }, {
++ .virtual = TS72XX_PLD_VERSION_VIRT_BASE,
++ .pfn = __phys_to_pfn(TS72XX_PLD_VERSION_PHYS_BASE),
++ .length = TS72XX_PLD_VERSION_SIZE,
++ .type = MT_DEVICE,
++ }, {
+ .virtual = TS72XX_OPTIONS_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
+ .length = TS72XX_OPTIONS_SIZE,
+diff --git a/arch/arm/mach-ep93xx/ts72xx_sbcinfo.c b/arch/arm/mach-ep93xx/ts72xx_sbcinfo.c
+new file mode 100644
+index 0000000..4589d14
+--- /dev/null
++++ b/arch/arm/mach-ep93xx/ts72xx_sbcinfo.c
+@@ -0,0 +1,156 @@
++/*
++ * Technologic Systems TS-72XX sbc /proc/driver/sbcinfo entry.
++ *
++ * Original idea by Liberty Young (Technologic Systems).
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/proc_fs.h>
++#include <mach/hardware.h>
++#include <mach/ts72xx.h>
++
++struct infos {
++ const char *cpu_rev;
++ int model, pld;
++ int option_ad;
++ int option_rs485;
++ unsigned char jumpers[6]; // 0=off,1=on,2=error
++};
++
++static const char *revisions[] = { "A", "B", "C", "D0", "D1", "E0", "E1", "E2", "??" };
++
++
++static void get_sbcinfo(struct infos *data)
++{
++ void __iomem *p;
++ short rev;
++
++ /* CPU revision */
++ rev = __raw_readl(EP93XX_SYSCON_CHIPID) >> 28;
++ if (rev > ARRAY_SIZE(revisions))
++ rev = ARRAY_SIZE(revisions) - 1;
++ data->cpu_rev = revisions[rev];
++
++ /* Board model */
++ if (board_is_ts7200())
++ data->model = 7200;
++ else if (board_is_ts7250())
++ data->model = 7250;
++ else if (board_is_ts7260())
++ data->model = 7260;
++ else if (board_is_ts7400())
++ data->model = 7400;
++ else
++ data->model = 0;
++
++ data->pld = get_ts72xx_pld_version();
++
++ /* A/D converter (8 x 12-bit channels) */
++ if ((data->model == 7200) || (data->model == 7250)) {
++ data->option_ad = is_max197_installed();
++ } else {
++ data->option_ad = 0;
++ }
++
++ /* COM2 RS-485 */
++ if (is_rs485_installed()) {
++ data->option_rs485 = 1;
++ } else {
++ data->option_rs485 = 0;
++ }
++
++ /* jumpers */
++ p = ioremap(TS72XX_JUMPERS_MAX197_PHYS_BASE, TS72XX_JUMPERS_MAX197_SIZE);
++ if (p) {
++ unsigned char c = __raw_readb(p);
++
++ data->jumpers[0] = 2; // JP1 (bootstrap)
++ data->jumpers[1] = !!(c & 0x01); // JP2 (enable serial console)
++ data->jumpers[2] = !!(c & 0x02); // JP3 (flash write enable)
++ data->jumpers[3] = !(c & 0x08); // JP4 (console on COM2)
++ data->jumpers[4] = !(c & 0x10); // JP5 (test)
++ data->jumpers[5] = !!(is_jp6_set()); // JP6 (user jumper)
++
++ iounmap(p);
++ } else {
++ data->jumpers[0] = data->jumpers[1] = data->jumpers[2] = 2;
++ data->jumpers[3] = data->jumpers[4] = data->jumpers[5] = 2;
++ }
++
++}
++
++
++static int ts72xx_sbcinfo_read_proc(char *buffer, char **start, off_t offset,
++ int count, int *eof, void *data)
++{
++ int len, size = count;
++ char *p = buffer;
++ struct infos nfo;
++ const char jpc[3] = { 'n', 'y', '?' };
++
++ get_sbcinfo(&nfo);
++ len = scnprintf(p, size,
++ "Model : TS-%d (CPU rev %s) (PLD rev %c)\n"
++ "Option max197 A/D : %s\n"
++ "Option RS-485 : %s\n"
++ "Jumpers : JP2=%c JP3=%c JP4=%c JP5=%c JP6=%c\n",
++ nfo.model, nfo.cpu_rev, nfo.pld + 0x40,
++ (nfo.option_ad ? "yes" : "no"),
++ (nfo.option_rs485 ? "yes" : "no"),
++ jpc[nfo.jumpers[1]], jpc[nfo.jumpers[2]], jpc[nfo.jumpers[3]], jpc[nfo.jumpers[4]],
++ jpc[nfo.jumpers[5]]);
++
++ if (len <= offset + count)
++ *eof = 1;
++
++ *start = buffer + offset;
++ len -= offset;
++
++ if (len > count)
++ len = count;
++ if (len < 0)
++ len = 0;
++
++ return len;
++}
++
++
++static int __init ts72xx_sbcinfo_init(void)
++{
++ struct proc_dir_entry *entry;
++ int ret = 0;
++
++ entry = create_proc_read_entry("driver/sbcinfo", 0,
++ NULL, ts72xx_sbcinfo_read_proc, NULL);
++
++ if (!entry) {
++ printk(KERN_ERR "sbcinfo: can't create /proc/driver/sbcinfo\n");
++ ret = -ENOMEM;
++ }
++
++ return ret;
++}
++
++static void __exit ts72xx_sbcinfo_exit(void)
++{
++ remove_proc_entry("driver/sbcinfo", NULL);
++ return;
++}
++
++module_init(ts72xx_sbcinfo_init);
++module_exit(ts72xx_sbcinfo_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("Show information of Technologic Systems TS-72XX sbc");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("1.02");
+--
+1.6.0.4
+
--- /dev/null
+From 260c46b5aebe614f8020b1b9a2a2fff4cbf85da4 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:45:23 +0100
+Subject: [PATCH] ep93xx_eth
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ drivers/net/arm/Kconfig | 1 +
+ drivers/net/arm/ep93xx_eth.c | 339 ++++++++++++++++++++++++++++++++++--------
+ 2 files changed, 278 insertions(+), 62 deletions(-)
+
+diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
+index c37ee9e..a5f2a98 100644
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -52,6 +52,7 @@ config EP93XX_ETH
+ tristate "EP93xx Ethernet support"
+ depends on ARM && ARCH_EP93XX
+ select MII
++ select PHYLIB
+ help
+ This is a driver for the ethernet hardware included in EP93xx CPUs.
+ Say Y if you are building a kernel for EP93xx based devices.
+diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
+index b25467a..923a21b 100644
+--- a/drivers/net/arm/ep93xx_eth.c
++++ b/drivers/net/arm/ep93xx_eth.c
+@@ -2,6 +2,7 @@
+ * EP93xx ethernet network device driver
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
++ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+@@ -14,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/netdevice.h>
+ #include <linux/mii.h>
++#include <linux/phy.h>
+ #include <linux/etherdevice.h>
+ #include <linux/ethtool.h>
+ #include <linux/init.h>
+@@ -25,7 +27,7 @@
+ #include <asm/io.h>
+
+ #define DRV_MODULE_NAME "ep93xx-eth"
+-#define DRV_MODULE_VERSION "0.1"
++#define DRV_MODULE_VERSION "0.12"
+
+ #define RX_QUEUE_ENTRIES 64
+ #define TX_QUEUE_ENTRIES 8
+@@ -37,6 +39,8 @@
+ #define REG_RXCTL_DEFAULT 0x00073800
+ #define REG_TXCTL 0x0004
+ #define REG_TXCTL_ENABLE 0x00000001
++#define REG_TESTCTL 0x0008
++#define REG_TESTCTL_MFDX 0x00000040
+ #define REG_MIICMD 0x0010
+ #define REG_MIICMD_READ 0x00008000
+ #define REG_MIICMD_WRITE 0x00004000
+@@ -45,6 +49,9 @@
+ #define REG_MIISTS_BUSY 0x00000001
+ #define REG_SELFCTL 0x0020
+ #define REG_SELFCTL_RESET 0x00000001
++#define REG_SELFCTL_MDCDIV_MSK 0x00007e00
++#define REG_SELFCTL_MDCDIV_OFS 9
++#define REG_SELFCTL_PSPRS 0x00000100
+ #define REG_INTEN 0x0024
+ #define REG_INTEN_TX 0x00000008
+ #define REG_INTEN_RX 0x00000007
+@@ -174,8 +181,14 @@ struct ep93xx_priv
+
+ struct net_device_stats stats;
+
+- struct mii_if_info mii;
+ u8 mdc_divisor;
++ int phy_supports_mfps:1;
++
++ struct mii_bus mii_bus;
++ struct phy_device *phy_dev;
++ int speed;
++ int duplex;
++ int link;
+ };
+
+ #define rdb(ep, off) __raw_readb((ep)->base_addr + (off))
+@@ -185,8 +198,6 @@ struct ep93xx_priv
+ #define wrw(ep, off, val) __raw_writew((val), (ep)->base_addr + (off))
+ #define wrl(ep, off, val) __raw_writel((val), (ep)->base_addr + (off))
+
+-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg);
+-
+ static struct net_device_stats *ep93xx_get_stats(struct net_device *dev)
+ {
+ struct ep93xx_priv *ep = netdev_priv(dev);
+@@ -522,6 +533,22 @@ err:
+ return 1;
+ }
+
++static int ep93xx_mdio_reset(struct mii_bus *bus)
++{
++ struct ep93xx_priv *ep = bus->priv;
++
++ u32 selfctl = rdl(ep, REG_SELFCTL);
++
++ selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
++
++ selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
++ selfctl |= REG_SELFCTL_PSPRS;
++
++ wrl(ep, REG_SELFCTL, selfctl);
++
++ return 0;
++}
++
+ static int ep93xx_start_hw(struct net_device *dev)
+ {
+ struct ep93xx_priv *ep = netdev_priv(dev);
+@@ -540,11 +567,8 @@ static int ep93xx_start_hw(struct net_device *dev)
+ return 1;
+ }
+
+- wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9));
+-
+- /* Does the PHY support preamble suppress? */
+- if ((ep93xx_mdio_read(dev, ep->mii.phy_id, MII_BMSR) & 0x0040) != 0)
+- wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9) | (1 << 8));
++ /* The reset cleared REG_SELFCTL, so set the MDC divisor again */
++ ep93xx_mdio_reset(&ep->mii_bus);
+
+ /* Receive descriptor ring. */
+ addr = ep->descs_dma_addr + offsetof(struct ep93xx_descs, rdesc);
+@@ -653,6 +677,8 @@ static int ep93xx_open(struct net_device *dev)
+
+ wrl(ep, REG_GIINTMSK, REG_GIINTMSK_ENABLE);
+
++ phy_start(ep->phy_dev);
++
+ netif_start_queue(dev);
+
+ return 0;
+@@ -665,6 +691,9 @@ static int ep93xx_close(struct net_device *dev)
+ napi_disable(&ep->napi);
+ netif_stop_queue(dev);
+
++ if (ep->phy_dev)
++ phy_stop(ep->phy_dev);
++
+ wrl(ep, REG_GIINTMSK, 0);
+ free_irq(ep->irq, dev);
+ ep93xx_stop_hw(dev);
+@@ -676,51 +705,83 @@ static int ep93xx_close(struct net_device *dev)
+ static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+ {
+ struct ep93xx_priv *ep = netdev_priv(dev);
+- struct mii_ioctl_data *data = if_mii(ifr);
+
+- return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
++ return phy_mii_ioctl(ep->phy_dev, if_mii(ifr), cmd);
+ }
+
+-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
++/* common MII transactions should take < 100 iterations */
++#define EP93XX_PHY_TIMEOUT 2000
++
++static int ep93xx_mdio_wait(struct mii_bus *bus)
+ {
+- struct ep93xx_priv *ep = netdev_priv(dev);
+- int data;
+- int i;
++ struct ep93xx_priv *ep = bus->priv;
++ unsigned int timeout = EP93XX_PHY_TIMEOUT;
+
+- wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
++ while ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY)
++ && timeout--)
++ cpu_relax();
+
+- for (i = 0; i < 10; i++) {
+- if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+- break;
+- msleep(1);
++ if (timeout <= 0) {
++ dev_err(&bus->dev, "MII operation timed out\n");
++ return -ETIMEDOUT;
+ }
+
+- if (i == 10) {
+- printk(KERN_INFO DRV_MODULE_NAME ": mdio read timed out\n");
+- data = 0xffff;
+- } else {
+- data = rdl(ep, REG_MIIDATA);
+- }
++ return 0;
++}
++
++static int ep93xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
++{
++ struct ep93xx_priv *ep = bus->priv;
++ u32 selfctl;
++ u32 data;
++
++ if (ep93xx_mdio_wait(bus) < 0)
++ return -ETIMEDOUT;
++
++ selfctl = rdl(ep, REG_SELFCTL);
++
++ if (ep->phy_supports_mfps)
++ wrl(ep, REG_SELFCTL, selfctl | REG_SELFCTL_PSPRS);
++ else
++ wrl(ep, REG_SELFCTL, selfctl & ~REG_SELFCTL_PSPRS);
++
++ wrl(ep, REG_MIICMD, REG_MIICMD_READ | (mii_id << 5) | regnum);
++
++ if (ep93xx_mdio_wait(bus) < 0)
++ return -ETIMEDOUT;
++
++ data = rdl(ep, REG_MIIDATA);
++
++ wrl(ep, REG_SELFCTL, selfctl);
+
+ return data;
+ }
+
+-static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
++static int ep93xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++ u16 value)
+ {
+- struct ep93xx_priv *ep = netdev_priv(dev);
+- int i;
++ struct ep93xx_priv *ep = bus->priv;
++ u32 selfctl;
+
+- wrl(ep, REG_MIIDATA, data);
+- wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
++ if (ep93xx_mdio_wait(bus) < 0)
++ return -ETIMEDOUT;
+
+- for (i = 0; i < 10; i++) {
+- if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+- break;
+- msleep(1);
+- }
++ selfctl = rdl(ep, REG_SELFCTL);
+
+- if (i == 10)
+- printk(KERN_INFO DRV_MODULE_NAME ": mdio write timed out\n");
++ if (ep->phy_supports_mfps)
++ wrl(ep, REG_SELFCTL, selfctl | REG_SELFCTL_PSPRS);
++ else
++ wrl(ep, REG_SELFCTL, selfctl & ~REG_SELFCTL_PSPRS);
++
++ wrl(ep, REG_MIIDATA, value);
++ wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (mii_id << 5) | regnum);
++
++ if (ep93xx_mdio_wait(bus) < 0)
++ return -ETIMEDOUT;
++
++ wrl(ep, REG_SELFCTL, selfctl);
++
++ return 0;
+ }
+
+ static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+@@ -732,33 +793,30 @@ static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *i
+ static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ep93xx_priv *ep = netdev_priv(dev);
+- return mii_ethtool_gset(&ep->mii, cmd);
++ struct phy_device *phydev = ep->phy_dev;
++
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_ethtool_gset(phydev, cmd);
+ }
+
+ static int ep93xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ep93xx_priv *ep = netdev_priv(dev);
+- return mii_ethtool_sset(&ep->mii, cmd);
+-}
++ struct phy_device *phydev = ep->phy_dev;
+
+-static int ep93xx_nway_reset(struct net_device *dev)
+-{
+- struct ep93xx_priv *ep = netdev_priv(dev);
+- return mii_nway_restart(&ep->mii);
+-}
++ if (!phydev)
++ return -ENODEV;
+
+-static u32 ep93xx_get_link(struct net_device *dev)
+-{
+- struct ep93xx_priv *ep = netdev_priv(dev);
+- return mii_link_ok(&ep->mii);
++ return phy_ethtool_sset(phydev, cmd);
+ }
+
+ static const struct ethtool_ops ep93xx_ethtool_ops = {
+ .get_drvinfo = ep93xx_get_drvinfo,
+ .get_settings = ep93xx_get_settings,
+ .set_settings = ep93xx_set_settings,
+- .nway_reset = ep93xx_nway_reset,
+- .get_link = ep93xx_get_link,
++ .get_link = ethtool_op_get_link,
+ };
+
+ static const struct net_device_ops ep93xx_netdev_ops = {
+@@ -820,12 +878,122 @@ static int ep93xx_eth_remove(struct platform_device *pdev)
+ return 0;
+ }
+
++static void ep93xx_adjust_link(struct net_device *dev)
++{
++ struct ep93xx_priv *ep = netdev_priv(dev);
++ struct phy_device *phydev = ep->phy_dev;
++
++ int status_change = 0;
++
++ if (phydev->link) {
++ if ((ep->speed != phydev->speed) ||
++ (ep->duplex != phydev->duplex)) {
++ /* speed and/or duplex state changed */
++ u32 testctl = rdl(ep, REG_TESTCTL);
++
++ if (DUPLEX_FULL == phydev->duplex)
++ testctl |= REG_TESTCTL_MFDX;
++ else
++ testctl &= ~(REG_TESTCTL_MFDX);
++
++ wrl(ep, REG_TESTCTL, testctl);
++
++ ep->speed = phydev->speed;
++ ep->duplex = phydev->duplex;
++ status_change = 1;
++ }
++ }
++
++ /* test for online/offline link transition */
++ if (phydev->link != ep->link) {
++ if (phydev->link) /* link went online */
++ netif_tx_schedule_all(dev);
++ else { /* link went offline */
++ ep->speed = 0;
++ ep->duplex = -1;
++ }
++ ep->link = phydev->link;
++
++ status_change = 1;
++ }
++
++ if (status_change)
++ phy_print_status(phydev);
++}
++
++static int ep93xx_mii_probe(struct net_device *dev, int phy_addr)
++{
++ struct ep93xx_priv *ep = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ int val;
++
++ if (phy_addr >= 0 && phy_addr < PHY_MAX_ADDR)
++ phydev = ep->mii_bus.phy_map[phy_addr];
++
++ if (!phydev) {
++ dev_info(&dev->dev,
++ "PHY not found at specified address,"
++ " trying autodetection\n");
++
++ /* find the first phy */
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++ if (ep->mii_bus.phy_map[phy_addr]) {
++ phydev = ep->mii_bus.phy_map[phy_addr];
++ break;
++ }
++ }
++ }
++
++ if (!phydev) {
++ dev_err(&dev->dev, "no PHY found\n");
++ return -ENODEV;
++ }
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev),
++ ep93xx_adjust_link, 0, PHY_INTERFACE_MODE_MII);
++
++ if (IS_ERR(phydev)) {
++ dev_err(&dev->dev, "Could not attach to PHY\n");
++ return PTR_ERR(phydev);
++ }
++
++ ep->phy_supports_mfps = 0;
++
++ val = phy_read(phydev, MII_BMSR);
++ if (val < 0) {
++ dev_err(&phydev->dev, "failed to read MII register\n");
++ return val;
++ }
++
++ if (val & 0x0040) {
++ dev_info(&phydev->dev,
++ "PHY supports MII frame preamble suppression\n");
++ ep->phy_supports_mfps = 1;
++ }
++
++ phydev->supported &= PHY_BASIC_FEATURES;
++
++ phydev->advertising = phydev->supported;
++
++ ep->link = 0;
++ ep->speed = 0;
++ ep->duplex = -1;
++ ep->phy_dev = phydev;
++
++ dev_info(&dev->dev, "attached PHY driver [%s] "
++ "(mii_bus:phy_addr=%s, irq=%d)\n",
++ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
++
++ return 0;
++}
++
+ static int ep93xx_eth_probe(struct platform_device *pdev)
+ {
+ struct ep93xx_eth_data *data;
+ struct net_device *dev;
+ struct ep93xx_priv *ep;
+- int err;
++ DECLARE_MAC_BUF(mac_buf);
++ int err, i;
+
+ if (pdev == NULL)
+ return -ENODEV;
+@@ -848,7 +1016,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
+ if (ep->res == NULL) {
+ dev_err(&pdev->dev, "Could not reserve memory region\n");
+ err = -ENOMEM;
+- goto err_out;
++ goto err_out_request_mem_region;
+ }
+
+ ep->base_addr = ioremap(pdev->resource[0].start,
+@@ -856,17 +1024,36 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
+ if (ep->base_addr == NULL) {
+ dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
+ err = -EIO;
+- goto err_out;
++ goto err_out_ioremap;
+ }
+ ep->irq = pdev->resource[1].start;
+
+- ep->mii.phy_id = data->phy_id;
+- ep->mii.phy_id_mask = 0x1f;
+- ep->mii.reg_num_mask = 0x1f;
+- ep->mii.dev = dev;
+- ep->mii.mdio_read = ep93xx_mdio_read;
+- ep->mii.mdio_write = ep93xx_mdio_write;
++ /* mdio/mii bus */
++ ep->mii_bus.state = MDIOBUS_ALLOCATED; /* see mdiobus_alloc */
++ ep->mii_bus.name = "ep93xx_mii_bus";
++ snprintf(ep->mii_bus.id, MII_BUS_ID_SIZE, "0");
++
++ ep->mii_bus.read = ep93xx_mdio_read;
++ ep->mii_bus.write = ep93xx_mdio_write;
++ ep->mii_bus.reset = ep93xx_mdio_reset;
++
++ ep->mii_bus.phy_mask = 0;
++
++ ep->mii_bus.priv = ep;
++ ep->mii_bus.dev = dev->dev;
++
++ ep->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
++ if (NULL == ep->mii_bus.irq) {
++ dev_err(&pdev->dev, "Could not allocate memory\n");
++ err = -ENOMEM;
++ goto err_out_mii_bus_irq_kmalloc;
++ }
++
++ for (i = 0; i < PHY_MAX_ADDR; i++)
++ ep->mii_bus.irq[i] = PHY_POLL;
++
+ ep->mdc_divisor = 40; /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz. */
++ ep->phy_supports_mfps = 0; /* probe without preamble suppression */
+
+ if (is_zero_ether_addr(dev->dev_addr))
+ random_ether_addr(dev->dev_addr);
+@@ -874,7 +1061,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to register netdev\n");
+- goto err_out;
++ goto err_out_register_netdev;
+ }
+
+ printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, "
+@@ -883,8 +1070,36 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
+ data->dev_addr[2], data->dev_addr[3],
+ data->dev_addr[4], data->dev_addr[5]);
+
++ err = mdiobus_register(&ep->mii_bus);
++ if (err) {
++ dev_err(&dev->dev, "Could not register MII bus\n");
++ goto err_out_mdiobus_register;
++ }
++
++ err = ep93xx_mii_probe(dev, data->phy_id);
++ if (err) {
++ dev_err(&dev->dev, "failed to probe MII bus\n");
++ goto err_out_mii_probe;
++ }
++
++ dev_info(&dev->dev, "ep93xx on-chip ethernet, IRQ %d, %s\n",
++ ep->irq, print_mac(mac_buf, dev->dev_addr));
++
+ return 0;
+
++err_out_mii_probe:
++ mdiobus_unregister(&ep->mii_bus);
++err_out_mdiobus_register:
++ unregister_netdev(dev);
++err_out_register_netdev:
++ kfree(ep->mii_bus.irq);
++err_out_mii_bus_irq_kmalloc:
++ iounmap(ep->base_addr);
++err_out_ioremap:
++ release_resource(ep->res);
++ kfree(ep->res);
++err_out_request_mem_region:
++ free_netdev(dev);
+ err_out:
+ ep93xx_eth_remove(pdev);
+ return err;
+--
+1.6.0.4
+
--- /dev/null
+From eb753556815cde046e35d206880a507eb052ac4e Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:52:13 +0100
+Subject: [PATCH] ts72xx_ts_ser1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ drivers/serial/8250_ts_ser1.c | 150 +++++++++++++++++++++++++++++++++++++++++
+ drivers/serial/Kconfig | 17 +++++
+ drivers/serial/Makefile | 1 +
+ 3 files changed, 168 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/serial/8250_ts_ser1.c
+
+diff --git a/drivers/serial/8250_ts_ser1.c b/drivers/serial/8250_ts_ser1.c
+new file mode 100644
+index 0000000..a3c95d4
+--- /dev/null
++++ b/drivers/serial/8250_ts_ser1.c
+@@ -0,0 +1,150 @@
++/*
++ * linux/drivers/serial/8250_ts_ser1.c
++ * Technologic Systems TS-SER1 support.
++ *
++ * (c) Copyright 2006-2008 Matthieu Crapet <mcrapet@gmail.com>
++ * Data taken from include/asm-i386/serial.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Pin Number:
++ * 1 DCD
++ * 2 Receive data
++ * 3 Trasmit data
++ * 4 DTR
++ * 5 Signal Ground
++ * 6 DSR
++ * 7 RTS
++ * 8 CTS
++ * 9 RI
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/serial_8250.h>
++#include <linux/irq.h>
++#include <linux/io.h>
++#include <mach/hardware.h>
++#include <mach/ts72xx.h>
++#include <mach/gpio.h>
++
++
++#define TS72XX_SER1_IO_PHYS_BASE (TS72XX_PC104_8BIT_IO_PHYS_BASE)
++#define TS72XX_SER1_IO_SIZE (TS72XX_PC104_8BIT_IO_SIZE)
++
++#define TS_SER1_PORT_COM3 0x3E8
++#define TS_SER1_PORT_COM4 0x2E8
++#define TS_SER1_PORT_COM5 0x3A8
++
++/* Value to write in 16550A scratch register */
++#define MARKER_BYTE 0xAA /* or 0x55 */
++
++#define PORT(_base,_irq) \
++ { \
++ .iobase = _base, \
++ .membase = (void __iomem *)0, \
++ .irq = _irq, \
++ .uartclk = 1843200, \
++ .iotype = UPIO_PORT, \
++ .flags = UPF_BOOT_AUTOCONF, \
++ }
++// Note: IRQ can be shared (see CONFIG_SERIAL_8250_SHARE_IRQ)
++
++
++static struct plat_serial8250_port ts72xx_ser1_data_com3[] = {
++ PORT(TS_SER1_PORT_COM3, 0),
++ { },
++};
++
++static struct plat_serial8250_port ts72xx_ser1_data_com4[] = {
++ PORT(TS_SER1_PORT_COM4, 0),
++ { },
++};
++
++static struct plat_serial8250_port ts72xx_ser1_data_com5[] = {
++ PORT(TS_SER1_PORT_COM5, 0),
++ { },
++};
++
++static struct platform_device ts72xx_ser1_device = {
++ .name = "serial8250",
++ .id = 0,
++ .dev = {
++ .platform_data = ts72xx_ser1_data_com3,
++ },
++};
++
++static void __iomem *iomem;
++
++
++static int __init ts_ser1_init(void)
++{
++ static struct plat_serial8250_port *comX = NULL;
++ int n = 0; // COM number as printed on TS-SER1 pcb
++
++ iomem = ioremap(TS72XX_SER1_IO_PHYS_BASE, TS72XX_SER1_IO_SIZE);
++
++ if (iomem != NULL) {
++ __raw_writeb(MARKER_BYTE, iomem + TS_SER1_PORT_COM3 + 7);
++ if (__raw_readb(iomem + TS_SER1_PORT_COM3 + 7) == MARKER_BYTE) {
++ comX = ts72xx_ser1_data_com3;
++ n = 3;
++ } else {
++ __raw_writeb(MARKER_BYTE, iomem + TS_SER1_PORT_COM4 + 7);
++ if (__raw_readb(iomem + TS_SER1_PORT_COM4 + 7) == MARKER_BYTE) {
++ comX = ts72xx_ser1_data_com4;
++ n = 4;
++ } else {
++ __raw_writeb(MARKER_BYTE, iomem + TS_SER1_PORT_COM5 + 7);
++ if (__raw_readb(iomem + TS_SER1_PORT_COM5 + 7) == MARKER_BYTE) {
++ comX = ts72xx_ser1_data_com5;
++ n = 5;
++ }
++ }
++ }
++
++ if (comX) {
++ #if CONFIG_SERIAL_8250_TS_SER1_IRQ == 5
++ gpio_direction_input(EP93XX_GPIO_LINE_F(3));
++ comX->irq = gpio_to_irq(EP93XX_GPIO_LINE_F(3)); // 83
++ set_irq_type(comX->irq, IRQ_TYPE_EDGE_RISING);
++ #elif CONFIG_SERIAL_8250_TS_SER1_IRQ == 6
++ comX->irq = IRQ_EP93XX_EXT1;
++ #elif CONFIG_SERIAL_8250_TS_SER1_IRQ == 7
++ comX->irq = IRQ_EP93XX_EXT3;
++ #else
++ comX->irq = IRQ_EP93XX_EXT3;
++ #endif
++
++ comX->iobase += (unsigned long)iomem; // virtual address
++ }
++
++ ts72xx_ser1_device.id = n;
++ ts72xx_ser1_device.dev.platform_data = comX;
++ }
++
++ return ((comX == NULL) ? -ENODEV :
++ platform_device_register(&ts72xx_ser1_device));
++}
++
++static void __exit ts_ser1_exit(void)
++{
++ iounmap(iomem);
++ platform_device_unregister(&ts72xx_ser1_device);
++}
++
++module_init(ts_ser1_init);
++module_exit(ts_ser1_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("8250 serial probe module for TS-SER1 (TS-72xx)");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("0.3");
+diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
+index e522572..0eeca06 100644
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -275,6 +275,23 @@ config SERIAL_8250_RM9K
+ port hardware found on MIPS RM9122 and similar processors.
+ If unsure, say N.
+
++config SERIAL_8250_TS_SER1
++ tristate "Support TS-SER1 (for TS-72XX SBC)"
++ depends on SERIAL_8250 != n && MACH_TS72XX
++ help
++ Say Y here if you have a TS-SER1 PC/104 peripheral.
++ COM number will be configured automaticaly.
++
++ To compile this driver as a module, choose M here: the module
++ will be called 8250_ts_ser1.
++
++config SERIAL_8250_TS_SER1_IRQ
++ int "Selected IRQ (5, 6 or 7)"
++ depends on SERIAL_8250_TS_SER1
++ default "5"
++ help
++ Enter jumper IRQ configuration
++
+ comment "Non-8250 serial port support"
+
+ config SERIAL_AMBA_PL010
+diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
+index d21d5dd..f8fdb4f 100644
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
+ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
+ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
++obj-$(CONFIG_SERIAL_8250_TS_SER1) += 8250_ts_ser1.o
+ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+ obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+--
+1.6.0.4
+
--- /dev/null
+From 406bb1336e9e5401adc61a0227f9bfc5f5a1ef5a Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:54:33 +0100
+Subject: [PATCH] ts72xx_rs485
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+Crude hack...
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/include/asm/ioctls.h | 3 +
+ drivers/serial/Kconfig | 8 +++
+ drivers/serial/amba-pl010.c | 137 +++++++++++++++++++++++++++++++++++++++--
+ 3 files changed, 142 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
+index a91d8a1..a4b60ae 100644
+--- a/arch/arm/include/asm/ioctls.h
++++ b/arch/arm/include/asm/ioctls.h
+@@ -70,6 +70,9 @@
+ #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+ #define FIOQSIZE 0x545E
+
++#define TIOC_SBCC485 0x545F /* TS72xx RTS/485 mode clear */
++#define TIOC_SBCS485 0x5460 /* TS72xx RTS/485 mode set */
++
+ /* Used for packet mode */
+ #define TIOCPKT_DATA 0
+ #define TIOCPKT_FLUSHREAD 1
+diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
+index 0eeca06..ff24f69 100644
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -321,6 +321,14 @@ config SERIAL_AMBA_PL010_CONSOLE
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
++config SERIAL_AMBA_PL010_TS72XX
++ bool "Support for RS-485 on AMBA serial port (for TS-72XX SBC)"
++ depends on SERIAL_AMBA_PL010 != n && MACH_TS72XX
++ help
++ This add support for RS-485 on some Technologic System SBC.
++
++ If unsure, say N.
++
+ config SERIAL_AMBA_PL011
+ tristate "ARM AMBA PL011 serial port support"
+ depends on ARM_AMBA
+diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
+index 429a8ae..aff4d9c 100644
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
+@@ -50,6 +50,10 @@
+
+ #include <asm/io.h>
+
++#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
++#include <mach/ts72xx.h>
++#endif
++
+ #define UART_NR 8
+
+ #define SERIAL_AMBA_MAJOR 204
+@@ -64,6 +68,12 @@
+ #define UART_DUMMY_RSR_RX 256
+ #define UART_PORT_SIZE 64
+
++#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
++static void __iomem *ts_rs485_data9_register;
++static void __iomem *ts_rs485_control_register;
++#endif
++
++
+ /*
+ * We wrap our port structure around the generic uart_port.
+ */
+@@ -385,7 +395,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
++ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+@@ -519,6 +529,107 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+ return ret;
+ }
+
++
++#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
++static int ts72xx_rs485_init(void)
++{
++ ts_rs485_data9_register = ioremap(TS72XX_RS485_MODE_PHYS_BASE, 4096);
++ if (ts_rs485_data9_register == NULL) {
++ return -1;
++ }
++
++ ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096);
++ if (ts_rs485_control_register == NULL) {
++ iounmap(ts_rs485_data9_register);
++ return -1;
++ }
++
++ return 0;
++}
++
++static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg)
++{
++ int baud, cflag, mode;
++ int datalength;
++
++ mode = (int)*arg;
++ if (!is_rs485_installed()) {
++ printk("amba-pl010.c: this board does not support RS485 auto mode\n");
++ return -EINVAL;
++ }
++
++ if (port->line != 1) {
++ printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n");
++ return -EINVAL;
++ }
++
++ datalength = 8;
++ cflag = port->state->port.tty->termios->c_cflag;
++ if (cflag & PARENB)
++ datalength++;
++
++ if (cflag & CSTOPB)
++ datalength++;
++
++ baud = tty_get_baud_rate(port->state->port.tty);
++
++ switch (cmd) {
++ case TIOC_SBCC485:
++ if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) {
++ printk("amba-pl010.c: unsetting auto RS485 mode\n");
++ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register);
++ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register);
++ }
++ break;
++ case TIOC_SBCS485:
++ if (mode & TS72XX_RS485_AUTO485FD) {
++ printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n");
++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register);
++ if (datalength > 8)
++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
++ } else if (mode & TS72XX_RS485_AUTO485HD) {
++ printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n");
++ switch (baud) {
++ case 9600:
++ __raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register);
++ break;
++ case 19200:
++ __raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register);
++ break;
++ case 57600:
++ __raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register);
++ break;
++ case 115200:
++ __raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register);
++ break;
++ default:
++ printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud);
++ return -1;
++ }
++ if (datalength > 8)
++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
++ }
++ break;
++ }
++
++ return 0;
++}
++
++static int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
++{
++ switch (cmd) {
++ case TIOC_SBCC485:
++ case TIOC_SBCS485:
++ return ts72xx_auto485(port, cmd, (unsigned long *)arg);
++ default:
++ return -ENOIOCTLCMD;
++ }
++
++ return -ENOIOCTLCMD;
++}
++#endif /* CONFIG_SERIAL_AMBA_PL010_TS72XX */
++
++
+ static struct uart_ops amba_pl010_pops = {
+ .tx_empty = pl010_tx_empty,
+ .set_mctrl = pl010_set_mctrl,
+@@ -536,6 +647,9 @@ static struct uart_ops amba_pl010_pops = {
+ .request_port = pl010_request_port,
+ .config_port = pl010_config_port,
+ .verify_port = pl010_verify_port,
++#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
++ .ioctl = pl010_ioctl,
++#endif
+ };
+
+ static struct uart_amba_port *amba_ports[UART_NR];
+@@ -792,11 +906,22 @@ static int __init pl010_init(void)
+ printk(KERN_INFO "Serial: AMBA driver\n");
+
+ ret = uart_register_driver(&amba_reg);
+- if (ret == 0) {
+- ret = amba_driver_register(&pl010_driver);
+- if (ret)
+- uart_unregister_driver(&amba_reg);
+- }
++ if (ret == 0) {
++ ret = amba_driver_register(&pl010_driver);
++
++ #if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
++ if (!ret && is_rs485_installed()) {
++ ret = ts72xx_rs485_init();
++ if (ret)
++ printk("amba-pl010.c: ts72xx_rs485_init() failed\n");
++ else
++ printk("amba-pl010.c: auto RS485 mode initialized\n");
++ }
++ #endif
++
++ if (ret)
++ uart_unregister_driver(&amba_reg);
++ }
+ return ret;
+ }
+
+--
+1.6.0.4
+
--- /dev/null
+From 8791c5e3d690b09e95eeda98449b1759d2e83c4c Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 17:59:19 +0100
+Subject: [PATCH] ts72xx_ts_eth100
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ drivers/net/Kconfig | 10 ++
+ drivers/net/Makefile | 1 +
+ drivers/net/ax88796.c | 4 +
+ drivers/net/ax88796_ts_eth100.c | 185 +++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 200 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/ax88796_ts_eth100.c
+
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index b2f71f7..485d22a 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -236,6 +236,16 @@ config AX88796_93CX6
+ help
+ Select this if your platform comes with an external 93CX6 eeprom.
+
++config AX88796_TS_ETH100
++ tristate "Support for TS-ETH100 (TS-72XX SBC)"
++ depends on AX88796 && MACH_TS72XX
++ help
++ Say Y here if you have a TS-ETH100 PC/104 peripheral.
++ IRQ numbers and I/O address will be configurated automatically.
++
++ To compile this driver as a module, choose M here: the module
++ will be called ax88796_ts_eth100.
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index 246323d..ef10c5e 100644
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -140,6 +140,7 @@ obj-$(CONFIG_B44) += b44.o
+ obj-$(CONFIG_FORCEDETH) += forcedeth.o
+ obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+ obj-$(CONFIG_AX88796) += ax88796.o
++obj-$(CONFIG_AX88796_TS_ETH100) += ax88796_ts_eth100.o
+ obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+
+ obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
+diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
+index 62d9c9c..5cf29f5 100644
+--- a/drivers/net/ax88796.c
++++ b/drivers/net/ax88796.c
+@@ -934,7 +934,11 @@ static int ax_probe(struct platform_device *pdev)
+ goto exit_mem2;
+ }
+
++ #ifdef CONFIG_AX88796_TS_ETH100
++ ei_status.reg_offset[0x10] = ax->map2 - ei_status.mem + 0x10;
++ #else
+ ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
++ #endif
+ }
+
+ /* got resources, now initialise and register device */
+diff --git a/drivers/net/ax88796_ts_eth100.c b/drivers/net/ax88796_ts_eth100.c
+new file mode 100644
+index 0000000..e8eb5e7
+--- /dev/null
++++ b/drivers/net/ax88796_ts_eth100.c
+@@ -0,0 +1,185 @@
++/*
++ * linux/drivers/net/ax88796_ts_eth100.c
++ * Technologic Systems TS-ETH100 support.
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/io.h>
++#include <net/ax88796.h>
++#include <mach/ts72xx.h>
++#include <mach/gpio.h>
++
++#define TS72XX_ETH100_IO8_PHYS_BASE (TS72XX_PC104_8BIT_IO_PHYS_BASE)
++#define TS72XX_ETH100_IO8_SIZE (TS72XX_PC104_8BIT_IO_SIZE)
++#define TS72XX_ETH100_IO16_PHYS_BASE (TS72XX_PC104_16BIT_IO_PHYS_BASE)
++#define TS72XX_ETH100_IO16_SIZE (TS72XX_PC104_16BIT_IO_SIZE)
++
++/* Technologic systems I/O space */
++#define TS_ETH100_PLD_0 0x100
++#define TS_ETH100_PLD_1 0x110
++#define TS_ETH100_PLD_2 0x120
++#define TS_ETH100_PLD_3 0x130
++
++/* NE2000 I/O space */
++#define TS_ETH100_MAC_0 0x200
++#define TS_ETH100_MAC_1 0x240
++#define TS_ETH100_MAC_2 0x300
++#define TS_ETH100_MAC_3 0x340
++
++/* Board identifier must be 5 ; PLD revision should be 1 */
++#define is_eth100_present(__iomem, __offset) \
++ (((__raw_readb(__iomem + __offset) & 0xF) == 0x5) && \
++ ((__raw_readb(__iomem + __offset + 4) & 0xF) == 0x1))
++
++/* Jumpers status (SRAM control register) */
++#define read_irq(__iomem, __offset) \
++ (__raw_readb(__iomem + __offset + 8) & 0xE)
++
++
++static u32 offsets[0x20] = {
++ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
++ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
++ 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F
++};
++
++static struct ax_plat_data ts72xx_eth100_asix_data = {
++ .flags = AXFLG_HAS_93CX6,
++ .wordlength = 2,
++ .dcr_val = 0x48,
++ .rcr_val = 0x40,
++ .reg_offsets = offsets,
++};
++
++static struct resource ts72xx_eth100_resource[] = {
++ [0] = {
++ .start = TS72XX_ETH100_IO8_PHYS_BASE,
++ .end = TS72XX_ETH100_IO8_PHYS_BASE + 0x3ff, //0x20 -1,
++ .flags = IORESOURCE_MEM
++ },
++ [1] = { /* 0x10 is NE_DATAPORT is 16-bit access */
++ .start = TS72XX_ETH100_IO16_PHYS_BASE,
++ .end = TS72XX_ETH100_IO16_PHYS_BASE + 0x3ff, //0x20 -1,
++ .flags = IORESOURCE_MEM
++ },
++ [2] = {
++ .start = IRQ_EP93XX_EXT1,
++ .end = IRQ_EP93XX_EXT1,
++ .flags = IORESOURCE_IRQ
++ }
++};
++
++
++static void ts72xx_eth100_release(struct device *dev)
++{
++ // nothing to do (no kfree) because we have static struct
++}
++
++
++static struct platform_device ts72xx_eth100_device_asix = {
++ .name = "ax88796",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(ts72xx_eth100_resource),
++ .resource = ts72xx_eth100_resource,
++ .dev = {
++ .platform_data = &ts72xx_eth100_asix_data,
++ .release = ts72xx_eth100_release,
++ }
++};
++
++
++static int __init ts_eth100_init(void)
++{
++ void __iomem *iomem;
++ static struct platform_device *ethX = NULL;
++
++ iomem = ioremap(TS72XX_ETH100_IO8_PHYS_BASE, TS72XX_ETH100_IO8_SIZE);
++ if (iomem != NULL) {
++ int irq = 0;
++
++ ethX = &ts72xx_eth100_device_asix;
++
++ if (is_eth100_present(iomem, TS_ETH100_PLD_0)) {
++ ethX->resource[0].start += TS_ETH100_MAC_0;
++ ethX->resource[0].end += TS_ETH100_MAC_0;
++ ethX->resource[1].start += TS_ETH100_MAC_0;
++ ethX->resource[1].end += TS_ETH100_MAC_0;
++ irq = read_irq(iomem, TS_ETH100_PLD_0);
++ } else if(is_eth100_present(iomem, TS_ETH100_PLD_1)) {
++ ethX->resource[0].start += TS_ETH100_MAC_1;
++ ethX->resource[0].end += TS_ETH100_MAC_1;
++ ethX->resource[1].start += TS_ETH100_MAC_1;
++ ethX->resource[1].end += TS_ETH100_MAC_1;
++ irq = read_irq(iomem, TS_ETH100_PLD_1);
++ } else if(is_eth100_present(iomem, TS_ETH100_PLD_2)) {
++ ethX->resource[0].start += TS_ETH100_MAC_2;
++ ethX->resource[0].end += TS_ETH100_MAC_2;
++ ethX->resource[1].start += TS_ETH100_MAC_2;
++ ethX->resource[1].end += TS_ETH100_MAC_2;
++ irq = read_irq(iomem, TS_ETH100_PLD_2);
++ } else if(is_eth100_present(iomem, TS_ETH100_PLD_3)) {
++ ethX->resource[0].start += TS_ETH100_MAC_3;
++ ethX->resource[0].end += TS_ETH100_MAC_3;
++ ethX->resource[1].start += TS_ETH100_MAC_3;
++ ethX->resource[1].end += TS_ETH100_MAC_3;
++ irq = read_irq(iomem, TS_ETH100_PLD_3);
++ } else {
++ ethX = NULL;
++ }
++
++ /* Translate IRQ number */
++ if (ethX != NULL) {
++ switch (irq) {
++ case 0x2: /* IRQ5 */
++ ethX->resource[2].start = gpio_to_irq(EP93XX_GPIO_LINE_F(3)); // 83
++ ethX->resource[2].end = gpio_to_irq(EP93XX_GPIO_LINE_F(3));
++ gpio_direction_input(EP93XX_GPIO_LINE_F(3));
++ set_irq_type(ethX->resource[2].start, IRQ_TYPE_EDGE_RISING);
++ break;
++ case 0x4: /* IRQ6 */
++ ethX->resource[2].start = IRQ_EP93XX_EXT1;
++ ethX->resource[2].end = IRQ_EP93XX_EXT1;
++ break;
++ case 0x8: /* IRQ7 */
++ default:
++ ethX->resource[2].start = IRQ_EP93XX_EXT3;
++ ethX->resource[2].end = IRQ_EP93XX_EXT3;
++ break;
++ }
++ }
++
++ iounmap(iomem);
++ }
++
++ return ((ethX == NULL) ? -ENODEV :
++ platform_device_register(&ts72xx_eth100_device_asix));
++}
++
++
++static void __exit ts_eth100_exit(void)
++{
++ platform_device_unregister(&ts72xx_eth100_device_asix);
++}
++
++module_init(ts_eth100_init);
++module_exit(ts_eth100_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("Asix 88796 ethernet probe module for TS-ETH100 (TS-72xx)");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("0.2");
+--
+1.6.0.4
+
--- /dev/null
+From 77d609ddb4485126aff3239050a0ce908c00ee71 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 18:02:58 +0100
+Subject: [PATCH] ts7200_cf_ide
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ drivers/ide/Kconfig | 7 +++++
+ drivers/ide/Makefile | 1 +
+ drivers/ide/ide_ts7200_cf.c | 64 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 72 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/ide/ide_ts7200_cf.c
+
+diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
+index 9a5d0aa..2c5182b 100644
+--- a/drivers/ide/Kconfig
++++ b/drivers/ide/Kconfig
+@@ -732,6 +732,13 @@ config BLK_DEV_IDE_AT91
+ depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+ select IDE_TIMINGS
+
++config BLK_DEV_TS7200_CF
++ tristate "TS-7200 IDE (CompactFlash) interface support"
++ depends on ARM && ARCH_EP93XX
++ help
++ Say Y here if you want to support the TS-7200 Compact Flash IDE controller
++ (manufactured by Technologic Systems).
++
+ config BLK_DEV_IDE_ICSIDE
+ tristate "ICS IDE interface support"
+ depends on ARM && ARCH_ACORN
+diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
+index 81df925..4bef198 100644
+--- a/drivers/ide/Makefile
++++ b/drivers/ide/Makefile
+@@ -111,6 +111,7 @@ obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o
+ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
+ obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
+ obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o
++obj-$(CONFIG_BLK_DEV_TS7200_CF) += ide_ts7200_cf.o
+
+ obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o
+
+diff --git a/drivers/ide/ide_ts7200_cf.c b/drivers/ide/ide_ts7200_cf.c
+new file mode 100644
+index 0000000..14c9765
+--- /dev/null
++++ b/drivers/ide/ide_ts7200_cf.c
+@@ -0,0 +1,64 @@
++/*
++ * Technologic Systems TS-7200 Compact Flash IDE device driver.
++ *
++ * (c) Copyright 2009 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/ide.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/ts72xx.h>
++
++
++static const struct ide_port_info ts7200_cf_ide_port_info = {
++ .host_flags = IDE_HFLAG_NO_DMA, // IDE_HFLAG_MMIO
++ .chipset = ide_generic,
++};
++
++static __init int ide_ts7200_cf_init(void)
++{
++ struct ide_hw hw, *hws[] = { &hw };
++ void __iomem *base, *ctl, *data;
++ struct ide_host *host;
++
++ base = ioremap(TS7200_CF_CMD_PHYS_BASE, 0x10); // 8-bit access
++ ctl = ioremap(TS7200_CF_AUX_PHYS_BASE, 0x10); // 8-bit access (usually base+0x206)
++ data = ioremap(TS7200_CF_DATA_PHYS_BASE, 0x10); // 16-bit access
++
++ if ((base != NULL) && (ctl != NULL) && (data != NULL)) {
++ memset(&hw, 0, sizeof(hw));
++
++ ide_std_init_ports(&hw, (unsigned long)base, (unsigned long)ctl);
++ hw.io_ports.data_addr = (unsigned long)data;
++ hw.irq = IRQ_EP93XX_EXT0;
++
++ return ide_host_add(&ts7200_cf_ide_port_info, hws, 1, &host);
++ }
++
++ if (base) iounmap(base);
++ if (ctl) iounmap(ctl);
++ if (data) iounmap(data);
++
++ return -ENODEV;
++}
++
++
++module_init(ide_ts7200_cf_init);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("TS-7200 Compact Flash IDE driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("0.2");
+--
+1.6.0.4
+
--- /dev/null
+From caec39562afb6755f47dace8cdc46a0451034c3d Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 18:05:25 +0100
+Subject: [PATCH] ts72xx_pata
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ drivers/ata/Kconfig | 20 ++++++
+ drivers/ata/Makefile | 3 +
+ drivers/ata/pata_ts7200_cf.c | 85 +++++++++++++++++++++++
+ drivers/ata/pata_ts72xx.c | 155 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/ata/pata_ts9600.c | 88 ++++++++++++++++++++++++
+ 5 files changed, 351 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/ata/pata_ts7200_cf.c
+ create mode 100644 drivers/ata/pata_ts72xx.c
+ create mode 100644 drivers/ata/pata_ts9600.c
+
+diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
+index f2df6e2..0a310b4 100644
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -781,5 +781,25 @@ config PATA_BF54X
+
+ If unsure, say N.
+
++config PATA_TS72XX
++ bool "TS72XX ATA support"
++ depends on ARCH_EP93XX && MACH_TS72XX
++ help
++ This option enables support for ATA devices on Technologic Systems SBC.
++
++config PATA_TS7200_CF
++ tristate "TS7200 Compact Flash support"
++ depends on PATA_TS72XX
++ help
++ This option enables support for the compact flash control on
++ Technologic System TS-7200 SBC.
++
++config PATA_TS9600
++ tristate "TS9600 IDE interface support"
++ depends on PATA_TS72XX && BLK_DEV_IDE_TS9600 != y
++ help
++ This option enables support for Technologic Systems TS-9600 PC/104 IDE interface.
++
+ endif # ATA_SFF
++
+ endif # ATA
+diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
+index 01e126f..f784f0e 100644
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -77,6 +77,9 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
+ obj-$(CONFIG_PATA_AT91) += pata_at91.o
+ obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
+ obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
++obj-$(CONFIG_PATA_TS72XX) += pata_ts72xx.o
++obj-$(CONFIG_PATA_TS7200_CF) += pata_ts7200_cf.o
++obj-$(CONFIG_PATA_TS9600) += pata_ts9600.o
+ # Should be last but two libata driver
+ obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
+ # Should be last but one libata driver
+diff --git a/drivers/ata/pata_ts7200_cf.c b/drivers/ata/pata_ts7200_cf.c
+new file mode 100644
+index 0000000..cc884b5
+--- /dev/null
++++ b/drivers/ata/pata_ts7200_cf.c
+@@ -0,0 +1,85 @@
++/*
++ * Technologic Systems TS-7200 Compact Flash PATA device driver.
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/libata.h>
++#include <scsi/scsi_host.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/ts72xx.h>
++
++#define DRV_NAME "pata_ts7200_cf"
++#define DRV_VERSION "0.2"
++
++static struct resource ts7200_cf_resources[] = {
++ [0] = {
++ .start = TS7200_CF_CMD_PHYS_BASE,
++ .end = TS7200_CF_CMD_PHYS_BASE + 8,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = TS7200_CF_AUX_PHYS_BASE,
++ .end = TS7200_CF_AUX_PHYS_BASE + 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [2] = {
++ .start = TS7200_CF_DATA_PHYS_BASE,
++ .end = TS7200_CF_DATA_PHYS_BASE + 2,
++ .flags = IORESOURCE_MEM,
++ },
++ [3] = {
++ .start = IRQ_EP93XX_EXT0, /* pin 103 of EP9301 */
++ .end = IRQ_EP93XX_EXT0,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++
++static struct platform_device ts7200_cf_device = {
++ .name = "ts72xx-ide",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ts7200_cf_device.dev.coherent_dma_mask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .num_resources = ARRAY_SIZE(ts7200_cf_resources),
++ .resource = ts7200_cf_resources,
++};
++
++
++static __init int pata_ts7200_cf_init(void)
++{
++ return (board_is_ts7200()) ? \
++ platform_device_register(&ts7200_cf_device) : -ENODEV;
++}
++
++static __exit void pata_ts7200_cf_exit(void)
++{
++ platform_device_unregister(&ts7200_cf_device);
++}
++
++module_init(pata_ts7200_cf_init);
++module_exit(pata_ts7200_cf_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("TS-7200 CF PATA device driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+diff --git a/drivers/ata/pata_ts72xx.c b/drivers/ata/pata_ts72xx.c
+new file mode 100644
+index 0000000..e96cee3
+--- /dev/null
++++ b/drivers/ata/pata_ts72xx.c
+@@ -0,0 +1,155 @@
++/*
++ * TS-72XX PATA driver for Technologic Systems boards.
++ *
++ * Based on pata_platform.c by Paul Mundt &
++ * Alessandro Zummo <a.zummo@towertech.it>
++ * and old pata-ts72xx.c by Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <scsi/scsi_host.h>
++#include <linux/ata.h>
++#include <linux/libata.h>
++
++#define DRV_NAME "pata_ts72xx"
++#define DRV_VERSION "2.01"
++
++
++/*
++ * Provide our own set_mode() as we don't want to change anything that has
++ * already been configured..
++ */
++static int ts72xx_set_mode(struct ata_link *link, struct ata_device **unused)
++{
++ struct ata_device *dev;
++
++ ata_for_each_dev(dev, link, ENABLED) {
++ if (ata_dev_enabled(dev)) {
++ /* We don't really care */
++ dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
++ dev->xfer_shift = ATA_SHIFT_PIO;
++ dev->flags |= ATA_DFLAG_PIO;
++ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
++ }
++ }
++ return 0;
++}
++
++static struct scsi_host_template ts72xx_sht = {
++ ATA_PIO_SHT(DRV_NAME),
++};
++
++static struct ata_port_operations ts72xx_port_ops = {
++ .inherits = &ata_sff_port_ops,
++ .set_mode = ts72xx_set_mode,
++};
++
++static __devinit int ts72xx_pata_probe(struct platform_device *pdev)
++{
++ struct ata_host *host;
++ struct ata_port *ap;
++ int irq;
++
++ struct resource *pata_cmd = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct resource *pata_aux = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ struct resource *pata_data = platform_get_resource(pdev, IORESOURCE_MEM, 2);
++
++ if (!pata_cmd || !pata_aux || !pata_data) {
++ dev_err(&pdev->dev, "missing resource(s)\n");
++ return -EINVAL;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ irq = 0; /* no irq */
++
++ /*
++ * Now that that's out of the way, wire up the port
++ */
++ host = ata_host_alloc(&pdev->dev, 1);
++ if (!host)
++ return -ENOMEM;
++ ap = host->ports[0];
++
++ ap->ops = &ts72xx_port_ops;
++ ap->pio_mask = 0x1f; /* PIO0-4 */
++ ap->flags |= ATA_FLAG_SLAVE_POSS;
++
++ /*
++ * Use polling mode if there's no IRQ
++ */
++ if (!irq) {
++ ap->flags |= ATA_FLAG_PIO_POLLING;
++ ata_port_desc(ap, "no IRQ, using PIO polling");
++ }
++
++ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, pata_cmd->start,
++ pata_cmd->end - pata_cmd->start + 1);
++ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, pata_aux->start,
++ pata_aux->end - pata_aux->start + 1);
++
++ if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
++ dev_err(&pdev->dev, "failed to map IO/CTL base\n");
++ return -ENOMEM;
++ }
++
++ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
++
++ ata_sff_std_ports(&ap->ioaddr);
++ ap->ioaddr.data_addr = devm_ioremap(&pdev->dev, pata_data->start,
++ pata_data->end - pata_data->start + 1);
++
++ ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
++ (unsigned long long)pata_cmd->start,
++ (unsigned long long)pata_aux->start);
++
++ return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
++ 0 /* irq flags */, &ts72xx_sht);
++}
++
++static __devexit int ts72xx_pata_remove(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct ata_host *host = dev_get_drvdata(dev);
++
++ ata_host_detach(host);
++
++ return 0;
++}
++
++static struct platform_driver ts72xx_pata_platform_driver = {
++ .probe = ts72xx_pata_probe,
++ .remove = __devexit_p(ts72xx_pata_remove),
++ .driver = {
++ .name = "ts72xx-ide",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init ts72xx_pata_init(void)
++{
++ return platform_driver_register(&ts72xx_pata_platform_driver);
++}
++
++static void __exit ts72xx_pata_exit(void)
++{
++ platform_driver_unregister(&ts72xx_pata_platform_driver);
++}
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("low-level driver for TS-72xx device PATA");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
++module_init(ts72xx_pata_init);
++module_exit(ts72xx_pata_exit);
+diff --git a/drivers/ata/pata_ts9600.c b/drivers/ata/pata_ts9600.c
+new file mode 100644
+index 0000000..0eb485a
+--- /dev/null
++++ b/drivers/ata/pata_ts9600.c
+@@ -0,0 +1,88 @@
++/*
++ * Technologic Systems TS-9600 PATA device driver.
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/libata.h>
++#include <scsi/scsi_host.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/ts72xx.h>
++
++#define DRV_NAME "pata_ts9600"
++#define DRV_VERSION "0.2"
++
++#define TS9600_IDE_IO (TS72XX_PC104_8BIT_IO_PHYS_BASE + 0x1F0)
++#define TS9600_IDE_DATA (TS72XX_PC104_16BIT_IO_PHYS_BASE + 0x1F0)
++#define TS9600_IDE_IRQ IRQ_EP93XX_EXT3 // IRQ7 (no other possibility for arm)
++
++static struct resource ts9600_resources[] = {
++ [0] = {
++ .start = TS9600_IDE_IO,
++ .end = TS9600_IDE_IO + 8,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = TS9600_IDE_IO + 0x206,
++ .end = TS9600_IDE_IO + 0x206 + 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [2] = {
++ .start = TS9600_IDE_DATA,
++ .end = TS9600_IDE_DATA + 2,
++ .flags = IORESOURCE_MEM,
++ },
++ [3] = {
++ .start = TS9600_IDE_IRQ,
++ .end = TS9600_IDE_IRQ,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++
++static struct platform_device ts9600_device = {
++ .name = "ts72xx-ide",
++ .id = 9600,
++ .dev = {
++ .dma_mask = &ts9600_device.dev.coherent_dma_mask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .num_resources = ARRAY_SIZE(ts9600_resources),
++ .resource = ts9600_resources,
++};
++
++
++static __init int pata_ts9600_init(void)
++{
++ return platform_device_register(&ts9600_device);
++}
++
++static __exit void pata_ts9600_exit(void)
++{
++ platform_device_unregister(&ts9600_device);
++}
++
++module_init(pata_ts9600_init);
++module_exit(pata_ts9600_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("TS-9600 PATA device driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+--
+1.6.0.4
+
--- /dev/null
+From d4b791d23b63acc50213dc679eb2bd2d10aa697d Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 18:28:27 +0100
+Subject: [PATCH] ep93xx_pm
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/mach-ep93xx/Makefile | 3 ++
+ arch/arm/mach-ep93xx/pm.c | 78 +++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 81 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-ep93xx/pm.c
+
+diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
+index c2451e6..8624d62 100644
+--- a/arch/arm/mach-ep93xx/Makefile
++++ b/arch/arm/mach-ep93xx/Makefile
+@@ -12,3 +12,6 @@ obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+ obj-$(CONFIG_MACH_MICRO9) += micro9.o
+ obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
+ obj-$(CONFIG_MACH_TS72XX_SBCINFO) += ts72xx_sbcinfo.o
++
++# Power Management
++obj-$(CONFIG_PM) += pm.o
+diff --git a/arch/arm/mach-ep93xx/pm.c b/arch/arm/mach-ep93xx/pm.c
+new file mode 100644
+index 0000000..d3714c8
+--- /dev/null
++++ b/arch/arm/mach-ep93xx/pm.c
+@@ -0,0 +1,78 @@
++/*
++ * arch/arm/mach-ep93xx/pm.c
++ *
++ * EP93xx Power Management Routines
++ *
++ * Based on pm.c from Andre Renaud, Bluewater Systems Ltd.
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/suspend.h>
++#include <linux/sched.h>
++#include <linux/proc_fs.h>
++#include <linux/interrupt.h>
++#include <linux/sysfs.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <mach/hardware.h>
++
++
++static inline void ep93xx_standby(void)
++{
++ u32 v;
++ v = __raw_readl(EP93XX_SYSCON_DEVCFG);
++ v |= EP93XX_SYSCON_DEVCFG_SHENA;
++ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
++ __raw_writel(v, EP93XX_SYSCON_DEVCFG);
++
++ v = __raw_readl(EP93XX_SYSCON_STANDBY);
++
++ asm("nop; nop; nop; nop; nop");
++}
++
++static inline void ep93xx_resume(void)
++{
++ u32 v;
++
++ v = __raw_readl(EP93XX_SYSCON_DEVCFG);
++ v &= ~EP93XX_SYSCON_DEVCFG_SHENA;
++ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
++ __raw_writel(v, EP93XX_SYSCON_DEVCFG);
++}
++
++static int suspend_ep93xx_enter(suspend_state_t state)
++{
++ switch (state) {
++ case PM_SUSPEND_STANDBY:
++ case PM_SUSPEND_MEM:
++ ep93xx_standby(); /* go zzz */
++ ep93xx_resume();
++ }
++ return 0;
++}
++
++static int suspend_ep93xx_valid(suspend_state_t state)
++{
++ return (state == PM_SUSPEND_STANDBY) ||
++ (state == PM_SUSPEND_MEM);
++}
++
++
++static struct platform_suspend_ops ep93xx_suspend_ops = {
++ .enter = suspend_ep93xx_enter,
++ .valid = suspend_ep93xx_valid,
++};
++
++static int __init ep93xx_pm_init(void)
++{
++ pr_info("ep93xx: Power Management\n");
++ suspend_set_ops(&ep93xx_suspend_ops);
++ return 0;
++}
++__initcall(ep93xx_pm_init);
+--
+1.6.0.4
+
--- /dev/null
+From 6983bb07df054687038f1dac74644ae1408d4f28 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 18:44:11 +0100
+Subject: [PATCH] ts72xx_gpio_i2c
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/mach-ep93xx/ts72xx.c | 22 ++++++++++++++++++++++
+ 1 files changed, 22 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
+index 2c0af20..6b0ddd9 100644
+--- a/arch/arm/mach-ep93xx/ts72xx.c
++++ b/arch/arm/mach-ep93xx/ts72xx.c
+@@ -16,6 +16,9 @@
+ #include <linux/io.h>
+ #include <linux/m48t86.h>
+ #include <linux/mtd/physmap.h>
++#include <linux/gpio.h>
++#include <linux/i2c.h>
++#include <linux/i2c-gpio.h>
+
+ #include <mach/hardware.h>
+ #include <mach/ts72xx.h>
+@@ -210,12 +213,31 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
+ .phy_id = 1,
+ };
+
++/*************************************************************************
++ * i2c peripheral handling
++ *************************************************************************/
++static struct i2c_gpio_platform_data ts72xx_i2c_gpio_data = {
++ .sda_pin = EP93XX_GPIO_LINE_EGPIO14, // DIO_6 (TS72XX DIO 2x8 header)
++ .sda_is_open_drain = 0,
++ .scl_pin = EP93XX_GPIO_LINE_EGPIO15, // DIO_7 (TS72XX DIO 2x8 header)
++ .scl_is_open_drain = 0,
++ .udelay = 0, /* default to 100 kHz */
++ .timeout = 0, /* default to 100 ms */
++};
++
++static struct i2c_board_info __initdata ts72xx_i2c_board_info[] = {
++};
++
++
+ static void __init ts72xx_init_machine(void)
+ {
+ ep93xx_init_devices();
+ ts72xx_register_flash();
+ platform_device_register(&ts72xx_rtc_device);
+
++ ep93xx_register_i2c(&ts72xx_i2c_gpio_data,
++ ts72xx_i2c_board_info,
++ ARRAY_SIZE(ts72xx_i2c_board_info));
+ ep93xx_register_eth(&ts72xx_eth_data, 1);
+
+ /* PWM1 is DIO_6 on TS-72xx header */
+--
+1.6.0.4
+
--- /dev/null
+From f00550cd73030bc2033e4482f31722d83a09b2a8 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 18:49:25 +0100
+Subject: [PATCH] ts72xx_dio_keypad
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/mach-ep93xx/include/mach/ts72xx-keypad.h | 30 ++
+ drivers/input/keyboard/Kconfig | 42 +++
+ drivers/input/keyboard/Makefile | 4 +
+ drivers/input/keyboard/ts72xx_dio_3x4.c | 65 +++++
+ drivers/input/keyboard/ts72xx_dio_4x4.c | 65 +++++
+ drivers/input/keyboard/ts72xx_keypad.c | 292 +++++++++++++++++++++
+ 6 files changed, 498 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-ep93xx/include/mach/ts72xx-keypad.h
+ create mode 100644 drivers/input/keyboard/ts72xx_dio_3x4.c
+ create mode 100644 drivers/input/keyboard/ts72xx_dio_4x4.c
+ create mode 100644 drivers/input/keyboard/ts72xx_keypad.c
+
+diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx-keypad.h b/arch/arm/mach-ep93xx/include/mach/ts72xx-keypad.h
+new file mode 100644
+index 0000000..bf44759
+--- /dev/null
++++ b/arch/arm/mach-ep93xx/include/mach/ts72xx-keypad.h
+@@ -0,0 +1,30 @@
++/*
++ * TS-72xx "GPIO Port X" input keypad driver
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ * Based on OMAP Keypad Driver (omap-keypad.c)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifndef __ASM_ARCH_TS72XX_KEYPAD_H
++#define __ASM_ARCH_TS72XX_KEYPAD_H
++
++#define EP93XX_PORTX_MAXROW 4
++#define EP93XX_PORTX_MAXCOL 4
++
++/* Example: Port X bit 0..7 = C0,..Cx,R0..Ry
++ * Cols are outputs
++ * Rows are inputs
++ */
++struct ep93xx_gpio_portx_keypad_platform_data {
++ int nr_rows, nr_cols;
++ int keycodes[EP93XX_PORTX_MAXROW][EP93XX_PORTX_MAXCOL]; /* Left to right, from top to bottom */
++ int gpio_rows[EP93XX_PORTX_MAXROW]; /* R0, R1, .., R_{MAXROW-1} */
++ int gpio_cols[EP93XX_PORTX_MAXCOL]; /* C0, C1, .., C_{MAXCOL-1} */
++};
++
++#endif /* __ASM_ARCH_TS72XX_KEYPAD_H */
+diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
+index ee98b1b..3c5c421 100644
+--- a/drivers/input/keyboard/Kconfig
++++ b/drivers/input/keyboard/Kconfig
+@@ -164,6 +164,48 @@ config KEYBOARD_EP93XX
+
+ To compile this driver as a module, choose M here: the
+ module will be called ep93xx_keypad.
++
++config KEYBOARD_TS72XX
++ tristate "TS72XX matrix keypad support"
++ depends on MACH_TS72XX
++ help
++ This driver implements supports for a matrix keypad connected
++ to EP93XX GPIO port B (aka DIO of TS-72XX SBCs).
++ Maximum of 4 rows and 4 cols are supported (using up to 4 interrupts).
++ This is implemented as a platform driver.
++
++ To compile this driver as a module, choose M here: the
++ module will be called ep93xx-keypad.
++
++if KEYBOARD_TS72XX
++
++choice
++ prompt "Keypad type"
++ default TS72XX_DIO_4X4_KEYPAD
++
++config TS72XX_DIO_3X4_KEYPAD
++ tristate "TS-72xx 3x4 matrix keypad"
++ depends on MACH_TS72XX
++ help
++ This a 12 keys (4 rows, 3 cols using DIO_0-6) keypad with the following layout:
++ 1 2 3
++ 4 5 6
++ 7 8 9
++ * 0 #
++
++config TS72XX_DIO_4X4_KEYPAD
++ tristate "TS-72xx 4x4 matrix keypad"
++ depends on MACH_TS72XX
++ help
++ This a 16 keys (4 rows, 4 cols using DIO_0-7) keypad with the following layout:
++ 7 8 9 F
++ 4 5 6 E
++ 1 2 3 D
++ A 0 B C
++
++endchoice
++
++endif # KEYBOARD_TS72XX
+
+ config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
+index babad5e..1a96733 100644
+--- a/drivers/input/keyboard/Makefile
++++ b/drivers/input/keyboard/Makefile
+@@ -37,3 +37,7 @@ obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+ obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
+ obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
+ obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
++
++obj-$(CONFIG_KEYBOARD_TS72XX) += ts72xx_keypad.o
++obj-$(CONFIG_TS72XX_DIO_3X4_KEYPAD) += ts72xx_dio_3x4.o
++obj-$(CONFIG_TS72XX_DIO_4X4_KEYPAD) += ts72xx_dio_4x4.o
+diff --git a/drivers/input/keyboard/ts72xx_dio_3x4.c b/drivers/input/keyboard/ts72xx_dio_3x4.c
+new file mode 100644
+index 0000000..b149a7a
+--- /dev/null
++++ b/drivers/input/keyboard/ts72xx_dio_3x4.c
+@@ -0,0 +1,65 @@
++/*
++ * TS-72xx keypad device driver for DIO1 header (DIO_0 thru DIO_7 are using port B)
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++
++#include <mach/ts72xx-keypad.h>
++
++/* Port B = XX R0 R1 R2 R3 C0 C1 C2
++ * (i.e. col2 is bit 0, row0 is bit 6, ...)
++ */
++static struct ep93xx_gpio_portx_keypad_platform_data kp_portb_3x4 = {
++ .nr_rows = 4,
++ .nr_cols = 3,
++ { { KEY_1, KEY_2, KEY_3 },
++ { KEY_4, KEY_5, KEY_6 },
++ { KEY_7, KEY_8, KEY_9 },
++ { KEY_KPASTERISK, KEY_0, KEY_ENTER }
++ },
++ .gpio_rows = { 6, 5, 4, 3 },
++ .gpio_cols = { 2, 1, 0 },
++};
++
++
++static void ts72xx_dio_release(struct device *dev)
++{
++ // nothing to do (no kfree) because we have static struct
++}
++
++static struct platform_device kp_portb_3x4_device = {
++ .name = "ep93xx-gpio-keypad",
++ .id = -1, // one instance only
++ .dev = {
++ .platform_data = &kp_portb_3x4,
++ .release = ts72xx_dio_release,
++ },
++};
++
++static int __init ts72xx_dio_init(void)
++{
++ return platform_device_register(&kp_portb_3x4_device);
++}
++
++static void __exit ts72xx_dio_exit(void)
++{
++ platform_device_unregister(&kp_portb_3x4_device);
++}
++
++module_init(ts72xx_dio_init);
++module_exit(ts72xx_dio_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("Platform device 3x4 keypad");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/input/keyboard/ts72xx_dio_4x4.c b/drivers/input/keyboard/ts72xx_dio_4x4.c
+new file mode 100644
+index 0000000..2d8089a
+--- /dev/null
++++ b/drivers/input/keyboard/ts72xx_dio_4x4.c
+@@ -0,0 +1,65 @@
++/*
++ * TS-72xx keypad device driver for DIO1 header (DIO_0 thru DIO_7 are using port B)
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++
++#include <mach/ts72xx-keypad.h>
++
++/* Port B = C0 R3 C1 R2 C2 C3 R1 R0
++ * (i.e. row0 is bit 0, row1 is bit 1, ...)
++ */
++static struct ep93xx_gpio_portx_keypad_platform_data kp_portb_4x4 = {
++ .nr_rows = 4,
++ .nr_cols = 4,
++ { { KEY_7, KEY_8, KEY_9, KEY_F },
++ { KEY_4, KEY_5, KEY_6, KEY_E },
++ { KEY_1, KEY_2, KEY_3, KEY_D },
++ { KEY_A, KEY_0, KEY_B, KEY_C }
++ },
++ .gpio_rows = { 0, 1, 4, 6 },
++ .gpio_cols = { 7, 5, 3, 2 },
++};
++
++
++static void ts72xx_dio_release(struct device *dev)
++{
++ // nothing to do (no kfree) because we have static struct
++}
++
++static struct platform_device kp_portb_4x4_device = {
++ .name = "ep93xx-gpio-keypad",
++ .id = -1, // one instance only
++ .dev = {
++ .platform_data = &kp_portb_4x4,
++ .release = ts72xx_dio_release,
++ },
++};
++
++static int __init ts72xx_dio_init(void)
++{
++ return platform_device_register(&kp_portb_4x4_device);
++}
++
++static void __exit ts72xx_dio_exit(void)
++{
++ platform_device_unregister(&kp_portb_4x4_device);
++}
++
++module_init(ts72xx_dio_init);
++module_exit(ts72xx_dio_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("Platform device 4x4 keypad");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/input/keyboard/ts72xx_keypad.c b/drivers/input/keyboard/ts72xx_keypad.c
+new file mode 100644
+index 0000000..6979689
+--- /dev/null
++++ b/drivers/input/keyboard/ts72xx_keypad.c
+@@ -0,0 +1,292 @@
++/*
++ * TS-72xx "GPIO Port B" input keypad driver
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ * Based on OMAP Keypad Driver (omap-keypad.c)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/input.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/io.h>
++#include <mach/hardware.h>
++#include <mach/gpio.h>
++
++#include <mach/ts72xx-keypad.h>
++
++#define DRV_NAME_PREFIX "ts72xx_keypad: "
++#define DRV_VERSION "2.0"
++
++/* We choose port B */
++#define EP93XX_GPIO_X_DATA EP93XX_GPIO_B_DATA
++#define EP93XX_GPIO_LINE_X EP93XX_GPIO_LINE_B
++
++struct ep93xx_gpio_portx_keypad {
++ u8 rows;
++ u8 cols;
++ int irqs[EP93XX_PORTX_MAXROW];
++ u8 mask_input;
++ u8 mask_output;
++ u8 row_trigger, col_trigger;
++ u8 mask_input_trigger;
++ struct timer_list timer;
++ struct input_dev *input;
++ struct ep93xx_gpio_portx_keypad_platform_data *rsc;
++};
++
++static void ep93xx_gpio_portx_tasklet(unsigned long);
++static void ep93xx_gpio_portx_timer(unsigned long);
++
++DECLARE_TASKLET_DISABLED(kp_tasklet, ep93xx_gpio_portx_tasklet, 0);
++
++
++static void ep93xx_gpio_portx_timer(unsigned long data)
++{
++ struct ep93xx_gpio_portx_keypad *ctx = (struct ep93xx_gpio_portx_keypad *)data;
++ int i;
++
++ for (i = 0; i < ctx->rows; i++)
++ enable_irq(ctx->irqs[i]);
++}
++
++
++static void ep93xx_gpio_portx_tasklet(unsigned long data)
++{
++ struct ep93xx_gpio_portx_keypad *ctx = (struct ep93xx_gpio_portx_keypad *)data;
++ int i, j;
++ u8 save;
++
++ /* Save data register */
++ save = __raw_readb(EP93XX_GPIO_X_DATA);
++
++ /* Make sure row is still 0 */
++ if (!(save & ctx->mask_input_trigger)) {
++
++ for (i = 0; i < ctx->cols; i++) {
++ for (j = 0; j < ctx->cols; j++) {
++ if (i == j)
++ gpio_set_value(EP93XX_GPIO_LINE_X(ctx->rsc->gpio_cols[j]), 1); //high
++ else
++ gpio_set_value(EP93XX_GPIO_LINE_X(ctx->rsc->gpio_cols[j]), 0); //low
++ }
++
++ if (__raw_readb(EP93XX_GPIO_X_DATA) & ctx->mask_input_trigger) {
++ ctx->col_trigger = i;
++ //printk("=>key col=%d, row=%d |%x\n", i, ctx->row_trigger, ctx->rsc->keycodes[ctx->row_trigger][i]);
++ input_report_key(ctx->input, ctx->rsc->keycodes[ctx->row_trigger][ctx->col_trigger], 1);
++ input_sync(ctx->input);
++ }
++ }
++
++ } else { // key released
++ input_report_key(ctx->input, ctx->rsc->keycodes[ctx->row_trigger][ctx->col_trigger], 0);
++ input_sync(ctx->input);
++ }
++
++ /* Restore all outputs to 0 */
++ __raw_writeb(save, EP93XX_GPIO_X_DATA);
++
++ /* Wait a little before enabling IRQ again */
++ mod_timer(&ctx->timer, jiffies + HZ/10);
++}
++
++
++/* Interrupt handler */
++static irqreturn_t ep93xx_gpio_portx_key_int(int irq, void *dev_id)
++{
++ struct ep93xx_gpio_portx_keypad *ctx = dev_id;
++ int i;
++
++ for (i = 0; i < ctx->rows; i++)
++ disable_irq(ctx->irqs[i]);
++
++ ctx->mask_input_trigger = 0;
++ for (i = 0; i < ctx->rows; i++) {
++ if (gpio_to_irq(EP93XX_GPIO_LINE_X(ctx->rsc->gpio_rows[i])) == irq) {
++ ctx->row_trigger = i;
++ ctx->mask_input_trigger = (1 << ctx->rsc->gpio_rows[i]);
++ break;
++ }
++ }
++
++ // deferred-execution method
++ tasklet_schedule(&kp_tasklet);
++
++ return IRQ_HANDLED;
++}
++
++
++static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
++{
++ struct ep93xx_gpio_portx_keypad *ctx;
++ struct input_dev *input_dev;
++ int i, j, ret, irq_idx;
++ struct ep93xx_gpio_portx_keypad_platform_data *pdata = pdev->dev.platform_data;
++
++ const char *irq_names[EP93XX_PORTX_MAXROW] = {
++ "kp-row0", "kp-row1", "kp-row2", "kp-row3" };
++
++ if (pdata == NULL) {
++ return -EINVAL;
++ }
++
++ if (!pdata->nr_rows || !pdata->nr_cols ||
++ (pdata->nr_rows > EP93XX_PORTX_MAXROW) ||
++ (pdata->nr_cols > EP93XX_PORTX_MAXCOL)) {
++ printk(KERN_ERR DRV_NAME_PREFIX "No rows, cols from pdata\n");
++ return -EINVAL;
++ }
++
++ ctx = kzalloc(sizeof(struct ep93xx_gpio_portx_keypad), GFP_KERNEL);
++ if (!ctx) {
++ return -ENOMEM;
++ }
++
++ input_dev = input_allocate_device();
++ if (!input_dev) {
++ kfree(ctx);
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, ctx);
++
++ ctx->input = input_dev;
++ ctx->rsc = pdata;
++ ctx->rows = pdata->nr_rows;
++ ctx->cols = pdata->nr_cols;
++
++ input_dev->evbit[0] = BIT(EV_KEY); // | BIT(EV_REP);
++
++ for (i = 0; i < pdata->nr_rows; i++) {
++ for (j = 0; j < pdata->nr_cols; j++) {
++ int code = pdata->keycodes[i][j];
++ if (code > 0)
++ set_bit(code, input_dev->keybit);
++ }
++ }
++ __clear_bit(KEY_RESERVED, input_dev->keybit);
++
++ input_dev->name = "GPIO keypad";
++ input_dev->phys = "ep93xx-keypad/input0";
++ input_dev->dev.parent = &pdev->dev;
++
++ input_dev->id.bustype = BUS_HOST;
++ input_dev->id.vendor = 0x0001;
++ input_dev->id.product = 0x0001;
++ input_dev->id.version = 0x0100;
++
++ ret = input_register_device(ctx->input);
++ if (ret < 0) {
++ printk(KERN_ERR DRV_NAME_PREFIX "Unable to register input device\n");
++ goto err1;
++ }
++
++ ctx->mask_output = 0;
++ for (i = 0; i < pdata->nr_cols; i++) {
++ ctx->mask_output |= (1 << pdata->gpio_cols[i]);
++ gpio_direction_output(EP93XX_GPIO_LINE_X(pdata->gpio_cols[i]), 0); // low
++ }
++
++ ctx->mask_input = 0;
++ for (i = 0; i < pdata->nr_rows; i++) {
++ ctx->mask_input |= (1 << pdata->gpio_rows[i]);
++ gpio_direction_input(EP93XX_GPIO_LINE_X(pdata->gpio_rows[i]));
++ }
++
++ for (i = 0; i < pdata->nr_rows; i++) {
++ ctx->irqs[i] = gpio_to_irq(EP93XX_GPIO_LINE_X(pdata->gpio_rows[i]));
++ set_irq_type(ctx->irqs[i], IRQ_TYPE_EDGE_FALLING);
++ ep93xx_gpio_int_debounce(ctx->irqs[i], 1); // TODO: create IRQ_TYPE_DEBOUNCE
++
++ ret = request_irq(ctx->irqs[i], ep93xx_gpio_portx_key_int, 0, irq_names[i], ctx);
++ if (ret < 0) {
++ irq_idx = i;
++ printk(KERN_ERR DRV_NAME_PREFIX "request_irq (%d)\n", ctx->irqs[i]);
++ goto err2;
++ }
++ }
++
++ tasklet_enable(&kp_tasklet);
++ kp_tasklet.data = (unsigned long)ctx;
++
++ setup_timer(&ctx->timer, ep93xx_gpio_portx_timer, (unsigned long)ctx);
++
++ return 0;
++
++err2:
++ for (i = 0; i <= irq_idx; i++)
++ free_irq(ctx->irqs[i], ctx);
++ input_unregister_device(input_dev);
++ input_dev = NULL;
++err1:
++ kfree(ctx);
++ input_free_device(input_dev);
++
++ return -EINVAL;
++}
++
++
++static int __devexit ep93xx_keypad_remove(struct platform_device *pdev)
++{
++ struct ep93xx_gpio_portx_keypad *ctx = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < ctx->rows; i++) {
++ disable_irq(ctx->irqs[i]);
++ free_irq(ctx->irqs[i], ctx);
++ }
++
++ del_timer_sync(&ctx->timer);
++
++ tasklet_disable(&kp_tasklet);
++ tasklet_kill(&kp_tasklet);
++
++ input_unregister_device(ctx->input);
++ kfree(ctx);
++
++ return 0;
++}
++
++
++#define ep93xx_keypad_suspend NULL
++#define ep93xx_keypad_resume NULL
++
++static struct platform_driver ep93xx_keypad_driver = {
++ .driver = {
++ .name = "ep93xx-gpio-keypad",
++ .owner = THIS_MODULE,
++ },
++ .probe = ep93xx_keypad_probe,
++ .remove = __devexit_p(ep93xx_keypad_remove),
++ .suspend = ep93xx_keypad_suspend,
++ .resume = ep93xx_keypad_resume,
++};
++
++static int __init ep93xx_keypad_init(void)
++{
++ printk(KERN_INFO DRV_NAME_PREFIX "platform driver v" DRV_VERSION "\n");
++ return platform_driver_register(&ep93xx_keypad_driver);
++}
++
++static void __exit ep93xx_keypad_exit(void)
++{
++ platform_driver_unregister(&ep93xx_keypad_driver);
++}
++
++module_init(ep93xx_keypad_init);
++module_exit(ep93xx_keypad_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("EP93xx GPIO port B keypad driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+--
+1.6.0.4
+
--- /dev/null
+From 2caff4e73854c56387d00ccd8b379b77288d8faa Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 19:10:30 +0100
+Subject: [PATCH] ep93xx_spi
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/mach-ep93xx/clock.c | 4 +
+ arch/arm/mach-ep93xx/core.c | 30 ++
+ arch/arm/mach-ep93xx/include/mach/spi.h | 18 ++
+ arch/arm/mach-ep93xx/ts72xx.c | 40 +++
+ drivers/spi/Kconfig | 13 +
+ drivers/spi/Makefile | 2 +
+ drivers/spi/spi_ep93xx.c | 500 +++++++++++++++++++++++++++++++
+ drivers/spi/spi_ep93xx.h | 61 ++++
+ drivers/spi/tmp124.c | 158 ++++++++++
+ 9 files changed, 826 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-ep93xx/include/mach/spi.h
+ create mode 100644 drivers/spi/spi_ep93xx.c
+ create mode 100644 drivers/spi/spi_ep93xx.h
+ create mode 100644 drivers/spi/tmp124.c
+
+diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
+index 1d0f9d8..d952910 100644
+--- a/arch/arm/mach-ep93xx/clock.c
++++ b/arch/arm/mach-ep93xx/clock.c
+@@ -98,6 +98,9 @@ static struct clk clk_pwm = {
+ .parent = &clk_xtali,
+ .rate = EP93XX_EXT_CLK_RATE,
+ };
++static struct clk clk_ssp = {
++ .rate = EP93XX_EXT_CLK_RATE / 2,
++};
+
+ static struct clk clk_video = {
+ .sw_locked = 1,
+@@ -185,6 +188,7 @@ static struct clk_lookup clocks[] = {
+ INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
+ INIT_CK("ep93xx-fb", NULL, &clk_video),
+ INIT_CK(NULL, "pwm_clk", &clk_pwm),
++ INIT_CK(NULL, "sspclk", &clk_ssp),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
+index b4357c3..e9abf81 100644
+--- a/arch/arm/mach-ep93xx/core.c
++++ b/arch/arm/mach-ep93xx/core.c
+@@ -31,6 +31,7 @@
+
+ #include <mach/hardware.h>
+ #include <mach/fb.h>
++#include <mach/spi.h>
+
+ #include <asm/mach/map.h>
+ #include <asm/mach/time.h>
+@@ -611,6 +612,34 @@ static struct platform_device ep93xx_leds = {
+ },
+ };
+
++/*************************************************************************
++ * EP93xx ssp peripheral handling
++ *************************************************************************/
++static struct resource ep93xx_ssp_resources[] = {
++ {
++ .start = EP93XX_SPI_PHYS_BASE,
++ .end = EP93XX_SPI_PHYS_BASE + 0x14,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = IRQ_EP93XX_SSP, // overrun in receive fifo
++ .end = IRQ_EP93XX_SSP,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct ep93xx_spi_data ep93xx_ssp_data = {
++ .chip_select_num = 4,
++};
++
++static struct platform_device ep93xx_ssp_device = {
++ .name = "ep93xx-spi",
++ .id = 1,
++ .resource = ep93xx_ssp_resources,
++ .num_resources = ARRAY_SIZE(ep93xx_ssp_resources),
++ .dev = {
++ .platform_data = &ep93xx_ssp_data,
++ }
++};
+
+ /*************************************************************************
+ * EP93xx pwm peripheral handling
+@@ -743,5 +772,6 @@ void __init ep93xx_init_devices(void)
+
+ platform_device_register(&ep93xx_rtc_device);
+ platform_device_register(&ep93xx_ohci_device);
++ platform_device_register(&ep93xx_ssp_device);
+ platform_device_register(&ep93xx_leds);
+ }
+diff --git a/arch/arm/mach-ep93xx/include/mach/spi.h b/arch/arm/mach-ep93xx/include/mach/spi.h
+new file mode 100644
+index 0000000..0e07fc9
+--- /dev/null
++++ b/arch/arm/mach-ep93xx/include/mach/spi.h
+@@ -0,0 +1,18 @@
++/*
++ * arch/arm/mach-ep93xx/include/mach/spi.h
++ */
++
++struct ep93xx_spi_data {
++ u16 chip_select_num;
++};
++
++
++/* spi_board_info.controller_data for SPI slave devices */
++struct ep93xx_spi_chip {
++ void (*cs_control)(u32 command);
++};
++
++/* Chip-select state */
++#define SPI_CS_ASSERT 0x1
++#define SPI_CS_DEASSERT 0x2
++#define SPI_CS_INIT 0x4
+diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
+index 6b0ddd9..6c61965 100644
+--- a/arch/arm/mach-ep93xx/ts72xx.c
++++ b/arch/arm/mach-ep93xx/ts72xx.c
+@@ -19,9 +19,11 @@
+ #include <linux/gpio.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
++#include <linux/spi/spi.h>
+
+ #include <mach/hardware.h>
+ #include <mach/ts72xx.h>
++#include <mach/spi.h>
+
+ #include <asm/mach-types.h>
+ #include <asm/mach/map.h>
+@@ -207,6 +209,39 @@ static struct platform_device ts72xx_rtc_device = {
+ };
+
+ /*************************************************************************
++ * SPI
++ *************************************************************************/
++
++#if defined(CONFIG_SPI_TMP124) || defined(CONFIG_SPI_TMP124_MODULE)
++void tmp124_spi_cs(u32 command) // FGPIO[2]
++{
++ if (command & SPI_CS_ASSERT) {
++ gpio_set_value(EP93XX_GPIO_LINE_MCCD2, 0);
++ } else if (command & SPI_CS_DEASSERT) {
++ gpio_set_value(EP93XX_GPIO_LINE_MCCD2, 1);
++ } else if (command & SPI_CS_INIT) {
++ gpio_request(EP93XX_GPIO_LINE_MCCD2, "TMP124 cs");
++ gpio_direction_output(EP93XX_GPIO_LINE_MCCD2, 1);
++ }
++}
++
++static struct ep93xx_spi_chip tmp124_hw = {
++ .cs_control = tmp124_spi_cs,
++};
++
++static struct spi_board_info ts72xx_spi_bus[] __initdata = {
++ {
++ /* TMP124 */
++ .modalias = "tmp124",
++ .controller_data = &tmp124_hw,
++ .bus_num = 1,
++ .chip_select = 0,
++ .max_speed_hz = 2 * 1000 * 1000,
++ }
++};
++#endif
++
++/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+ static struct ep93xx_eth_data ts72xx_eth_data = {
+@@ -240,6 +275,11 @@ static void __init ts72xx_init_machine(void)
+ ARRAY_SIZE(ts72xx_i2c_board_info));
+ ep93xx_register_eth(&ts72xx_eth_data, 1);
+
++ #if defined(CONFIG_SPI_TMP124) || defined(CONFIG_SPI_TMP124_MODULE)
++ spi_register_board_info(ts72xx_spi_bus,
++ ARRAY_SIZE(ts72xx_spi_bus));
++ #endif
++
+ /* PWM1 is DIO_6 on TS-72xx header */
+ ep93xx_register_pwm(0, 1);
+ }
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 4b6f7cb..e71e2ea 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -244,6 +244,12 @@ config SPI_XILINX
+ See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
+ Product Specification document (DS464) for hardware details.
+
++config SPI_EP93XX
++ tristate "EP93XX SPI controller"
++ depends on SPI_MASTER
++ help
++ Simple SPI driver for EP93xx.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+@@ -272,6 +278,13 @@ config SPI_TLE62X0
+ sysfs interface, with each line presented as a kind of GPIO
+ exposing both switch control and diagnostic feedback.
+
++config SPI_TMP124
++ tristate "Texas Instruments TMP1224, TMP124"
++ depends on SPI_MASTER && SYSFS
++ help
++ SPI driver for TMP12X temperature sensor chips.
++ This provides a sysfs entry for temperature reading (2°C accurate).
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 21a1182..ccc9075 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
++obj-$(CONFIG_SPI_EP93XX) += spi_ep93xx.o
+ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
+ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+ # ... add above this line ...
+@@ -38,6 +39,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
+ obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
++obj-$(CONFIG_SPI_TMP124) += tmp124.o
+ # ... add above this line ...
+
+ # SPI slave controller drivers (upstream link)
+diff --git a/drivers/spi/spi_ep93xx.c b/drivers/spi/spi_ep93xx.c
+new file mode 100644
+index 0000000..0e86b38
+--- /dev/null
++++ b/drivers/spi/spi_ep93xx.c
+@@ -0,0 +1,500 @@
++/*
++ * EP93xx SPI driver
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ * Based on pxa2xx_spi.c by Stephen Street / StreetFire Sound Labs
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Notes:
++ * - Uses SSP IP of processor
++ * - Restricted to SPI master mode
++ * - No DMA transfer
++ * - No power management support
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/clk.h>
++#include <linux/io.h>
++#include <asm/irq.h>
++#include <mach/hardware.h>
++#include <mach/spi.h>
++
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++
++#include "spi_ep93xx.h"
++
++
++struct ep93xx_spi {
++ struct spi_master *master; /* SPI framework hookup */
++ void __iomem *ioaddr; /* Virtual base address to SSP registers */
++ u32 freq_max;
++ u32 freq_min;
++ struct clk *clk;
++
++ struct workqueue_struct *workqueue;
++ struct work_struct work;
++ spinlock_t lock;
++ struct list_head queue;
++
++ struct ep93xx_spi_chip *cs_chip; /* Chip Select function */
++};
++
++static inline u16 read_reg(void __iomem *base, off_t offset)
++{
++ return __raw_readw(base + offset);
++}
++
++static inline void write_reg(u16 v, void __iomem *base, off_t offset)
++{
++ __raw_writew(v, base + offset);
++}
++
++/*
++ * compute SCR and CPSDVR bits to setup spi clock based on main input clock rate
++ * that was specified in platform data structure
++ * according to datasheet:
++ * tempclk = sspclk / cpsdvr
++ * spiclk = tempclk / (scr + 1)
++ * SCR valid range is 0..255
++ * CPSDVR valid range is 2..254
++ */
++static int spi_speed_set(struct ep93xx_spi *drv_data, unsigned speed_hz)
++{
++ unsigned long mainclk_hz = clk_get_rate(drv_data->clk);
++ u32 cpsdvr, scr;
++ u16 ssp_cr0;
++
++ for (cpsdvr = 2; cpsdvr <= 254; cpsdvr+=2) {
++ scr = DIV_ROUND_UP(mainclk_hz / speed_hz, cpsdvr);
++ /* now we have SCR+1 in scr, so count with that */
++ if (scr == 0) { /* speed_hz too big */
++ return -EINVAL;
++ }
++ if (scr <= (255 + 1))
++ break; /* we have valid scr and cpsdvr */
++ }
++ if (cpsdvr > 254) {
++ /* speed_hz is too small, set to minimum speed */
++ scr = 256;
++ cpsdvr = 254;
++ }
++ scr--;
++ write_reg(cpsdvr, drv_data->ioaddr, SSPCPSR);
++ ssp_cr0 = read_reg(drv_data->ioaddr, SSPCR0);
++ ssp_cr0 &= ~(SSP_CONTROL_SCR(0xff));
++ write_reg((ssp_cr0 | SSP_CONTROL_SCR(scr)), drv_data->ioaddr, SSPCR0);
++
++ return 0;
++}
++
++static irqreturn_t ssp_int(int irq, void *dev_id)
++{
++ struct ep93xx_spi *drv_data = dev_id;
++ write_reg(SSP_SSPIxx_RORIS, drv_data->ioaddr, SSPIxR); /* clear it */
++
++ printk(KERN_WARNING "SSP overrun\n");
++ return IRQ_HANDLED;
++}
++
++static int transfer_one_work(struct ep93xx_spi *drv_data, struct spi_message *msg)
++{
++ struct spi_device *spi = msg->spi;
++ struct spi_transfer *xfer;
++ int i;
++ u8 *p;
++
++ drv_data->cs_chip->cs_control(SPI_CS_ASSERT);
++
++ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++ if (!(xfer->tx_buf || xfer->rx_buf)) {
++ dev_dbg(&spi->dev, "missing rx or tx buf\n");
++ drv_data->cs_chip->cs_control(SPI_CS_DEASSERT);
++ return -EINVAL;
++ }
++
++ if (xfer->bits_per_word) {
++ u16 v = read_reg(drv_data->ioaddr, SSPCR0);
++ v = v & SSP_CONTROL_DSS_MASK;
++ v = v | ((xfer->bits_per_word - 1) & SSP_CONTROL_DSS_MASK);
++ write_reg(v, drv_data->ioaddr, SSPCR0);
++ }
++
++ if (xfer->speed_hz) {
++ if (spi_speed_set(drv_data,xfer->speed_hz) != 0){
++ dev_err(&spi->dev, "xfer speed hz invalid\n");
++ return -EINVAL;
++ }
++ }
++
++ if (xfer->tx_buf) {
++ p = (u8 *)xfer->tx_buf;
++
++ if ((spi->bits_per_word == 16 && xfer->bits_per_word == 0) ||
++ (xfer->bits_per_word == 16)) {
++ for (i = 0; i < xfer->len; i+=2)
++ write_reg((p[i] << 8) + p[i+1], drv_data->ioaddr, SSPDR);
++ } else {
++ for (i = 0; i < xfer->len; i++)
++ write_reg(p[i], drv_data->ioaddr, SSPDR);
++ }
++ }
++
++ if (xfer->rx_buf) {
++ u16 v;
++ p = xfer->rx_buf;
++
++ if ((spi->bits_per_word == 16 && xfer->bits_per_word == 0) ||
++ (xfer->bits_per_word == 16)) {
++ for (i = 0; i < xfer->len; i+=2) {
++ v = read_reg(drv_data->ioaddr, SSPDR);
++ p[i] = v >> 8;
++ p[i+1] = v & 0xFF;
++ }
++ } else {
++ for (i = 0; i < xfer->len; i++)
++ p[i] = read_reg(drv_data->ioaddr, SSPDR);
++ }
++ }
++
++ /* restore device bits_per_word */
++ if (xfer->bits_per_word) {
++ u16 v = read_reg(drv_data->ioaddr, SSPCR0);
++ v = v & SSP_CONTROL_DSS_MASK;
++ v |= spi->bits_per_word - 1;
++ write_reg(v, drv_data->ioaddr, SSPCR0);
++ }
++
++ /* restore device speed_hz */
++ if (xfer->speed_hz) {
++ if (spi_speed_set(drv_data,spi->max_speed_hz) != 0)
++ return -EINVAL;
++ }
++
++ dev_dbg(&spi->dev, "transfer: len=%u, tx_buf=%p, rx_buf=%p\n", xfer->len, xfer->tx_buf, xfer->rx_buf);
++ }
++
++ if (xfer->delay_usecs)
++ udelay(xfer->delay_usecs);
++ drv_data->cs_chip->cs_control(SPI_CS_DEASSERT);
++
++ msg->actual_length = 0;
++ msg->status = 0;
++
++ if (msg->complete)
++ msg->complete(msg->context);
++
++ return 0;
++}
++
++
++static void ssp_work(struct work_struct *work)
++{
++ struct ep93xx_spi *drv_data = container_of(work, struct ep93xx_spi, work);
++ unsigned long flags;
++
++ spin_lock_irqsave(&drv_data->lock, flags);
++ while (!list_empty(&drv_data->queue)) {
++ struct spi_message *m;
++
++ m = container_of(drv_data->queue.next, struct spi_message, queue);
++ list_del_init(&m->queue);
++ spin_unlock_irqrestore(&drv_data->lock, flags);
++
++ transfer_one_work(drv_data, m);
++
++ spin_lock_irqsave(&drv_data->lock, flags);
++ }
++ spin_unlock_irqrestore(&drv_data->lock, flags);
++}
++
++
++static int ssp_transfer(struct spi_device *spi, struct spi_message *m)
++{
++ struct spi_master *master = spi->master;
++ struct ep93xx_spi *drv_data = spi_master_get_devdata(master);
++ struct spi_transfer *t;
++ unsigned long flags;
++
++ m->actual_length = 0;
++
++ /* check each transfer's parameters */
++ list_for_each_entry (t, &m->transfers, transfer_list) {
++ u32 speed_hz = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
++ u8 bits_per_word = t->bits_per_word ? t->bits_per_word : spi->bits_per_word;
++
++ if (!t->tx_buf && !t->rx_buf && t->len)
++ return -EINVAL;
++ if (bits_per_word < 4 || bits_per_word > 16)
++ return -EINVAL;
++ /*if (t->len & ((bits_per_word >> 3) - 1))
++ return -EINVAL;*/
++ if (speed_hz < drv_data->freq_min || speed_hz > drv_data->freq_max)
++ return -EINVAL;
++ }
++
++ spin_lock_irqsave(&drv_data->lock, flags);
++ list_add_tail(&m->queue, &drv_data->queue);
++ queue_work(drv_data->workqueue, &drv_data->work);
++ spin_unlock_irqrestore(&drv_data->lock, flags);
++
++ return 0;
++
++}
++
++/* the spi->mode bits understood by this driver: */
++#define MODEBITS (SPI_CPOL | SPI_CPHA)
++
++static int ssp_setup(struct spi_device *spi)
++{
++ struct ep93xx_spi *drv_data = spi_master_get_devdata(spi->master);
++ struct ep93xx_spi_chip *chip_info;
++ u16 v;
++
++ /* Get controller data */
++ chip_info = spi->controller_data;
++ if (!chip_info) {
++ dev_err(&spi->dev, "setup: controller data required\n");
++ return -EINVAL;
++ }
++ drv_data->cs_chip = chip_info;
++ drv_data->cs_chip->cs_control(SPI_CS_INIT);
++
++ if (!spi->bits_per_word) {
++ spi->bits_per_word = 8;
++ }
++
++ if (spi->bits_per_word < 4 || spi->bits_per_word > 16) {
++ dev_dbg(&spi->dev, "setup: unsupported %d bit words\n",
++ spi->bits_per_word);
++ return -EINVAL;
++ }
++
++ if (spi->chip_select > spi->master->num_chipselect) {
++ dev_dbg(&spi->dev, "setup: invalid chipselect %u (%u defined)\n",
++ spi->chip_select, spi->master->num_chipselect);
++ return -EINVAL;
++ }
++
++ if (spi->mode & ~MODEBITS) {
++ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
++ spi->mode & ~MODEBITS);
++ return -EINVAL;
++ }
++
++ v = read_reg(drv_data->ioaddr, SSPCR0);
++
++ if (spi->mode & SPI_CPOL)
++ v |= SSP_CONTROL_SPO;
++ else
++ v &= ~SSP_CONTROL_SPO;
++
++ if (spi->mode & SPI_CPHA)
++ v |= SSP_CONTROL_SPH;
++ else
++ v &= ~SSP_CONTROL_SPH;
++
++ v = v & SSP_CONTROL_DSS_MASK;
++ v |= spi->bits_per_word - 1;
++
++ write_reg(v, drv_data->ioaddr, SSPCR0);
++
++ if (!spi->max_speed_hz) {
++ spi->max_speed_hz = drv_data->freq_min;
++ } else if (spi->max_speed_hz > drv_data->freq_max ||
++ spi->max_speed_hz < drv_data->freq_min){
++ return -EINVAL;
++ }
++
++ if (spi_speed_set(drv_data,spi->max_speed_hz) != 0){
++ dev_dbg(&spi->dev, "setup: unsupported speed %u\n", spi->max_speed_hz);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++
++static void ssp_cleanup(struct spi_device *spi)
++{
++ struct ep93xx_spi *drv_data = spi_master_get_devdata(spi->master);
++ drv_data->cs_chip = NULL;
++}
++
++
++static int __init spi_ep93xx_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct spi_master *master;
++ struct ep93xx_spi_data *spi_data = pdev->dev.platform_data;
++ struct ep93xx_spi *drv_data = NULL;
++ struct resource *memory_resource;
++ int irq, status = 0, min_div = 2, max_div = 254*(255+1);
++
++ /* Check I2SonSSP bit (ssp pins and i2s pins are multiplexed)
++ We could force with ep93xx_devcfg_clear_bits */
++ if (readl(EP93XX_SYSCON_DEVCFG) & EP93XX_SYSCON_DEVCFG_I2SONSSP)
++ return -ENODEV;
++
++ /* Allocate master with space for drv_data */
++ master = spi_alloc_master(dev, sizeof(struct ep93xx_spi));
++ if (!master) {
++ dev_err(&pdev->dev, "can not alloc spi_master\n");
++ return -ENOMEM;
++ }
++
++ /* Setup register addresses */
++ memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!memory_resource) {
++ dev_err(&pdev->dev, "memory resources not defined\n");
++ status = -ENODEV;
++ goto out_error_master_alloc;
++ }
++
++ drv_data = spi_master_get_devdata(master);
++ drv_data->master = master;
++ drv_data->ioaddr = ioremap(memory_resource->start, memory_resource->end - memory_resource->start + 1);
++ drv_data->clk = clk_get(&pdev->dev, "sspclk");
++ drv_data->freq_max = clk_get_rate(drv_data->clk) / min_div;
++ drv_data->freq_min = clk_get_rate(drv_data->clk) / max_div + 1;
++
++ INIT_WORK(&drv_data->work, ssp_work);
++ spin_lock_init(&drv_data->lock);
++ INIT_LIST_HEAD(&drv_data->queue);
++
++ drv_data->workqueue = create_singlethread_workqueue(dev_name(master->dev.parent));
++ if (!drv_data->workqueue) {
++ status = -EBUSY;
++ goto out_error_master_alloc;
++ }
++
++ master->bus_num = pdev->id;
++ master->num_chipselect = spi_data->chip_select_num;
++ master->cleanup = ssp_cleanup;
++ master->setup = ssp_setup;
++ master->transfer = ssp_transfer;
++
++ /* Attach to IRQ */
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_err(&pdev->dev, "irq resource not defined\n");
++ status = -ENODEV;
++ goto out_error_master_alloc;
++ }
++
++ status = request_irq(irq, ssp_int, 0, dev_name(dev), drv_data);
++ if (status < 0) {
++ dev_err(&pdev->dev, "can not get IRQ\n");
++ goto out_error_master_alloc;
++ }
++
++ /* Load default SSP configuration */
++ write_reg(SSP_CONTROL_SSE, drv_data->ioaddr, SSPCR1);
++ write_reg(SPI_DEFAULT0, drv_data->ioaddr, SSPCR0);
++ write_reg(SPI_DEFAULT_DIVISOR, drv_data->ioaddr, SSPCPSR);
++ write_reg(0x00, drv_data->ioaddr, SSPCR1);
++
++ /* Register with the SPI framework */
++ platform_set_drvdata(pdev, drv_data);
++ status = spi_register_master(master);
++ if (status != 0) {
++ dev_err(&pdev->dev, "problem registering spi master\n");
++ goto out_error_irq_alloc;
++ }
++
++ write_reg(SPI_DEFAULT1, drv_data->ioaddr, SSPCR1);
++ return status;
++
++out_error_irq_alloc:
++ free_irq(irq, drv_data);
++
++out_error_master_alloc:
++ spi_master_put(master);
++ return status;
++}
++
++static int spi_ep93xx_remove(struct platform_device *pdev)
++{
++ struct ep93xx_spi *drv_data = platform_get_drvdata(pdev);
++ int irq;
++
++ if (!drv_data)
++ return 0;
++
++ /* Disable SSP (clear SSE bit) */
++ write_reg(0x00, drv_data->ioaddr, SSPCR1);
++
++ /* Release IRQ */
++ irq = platform_get_irq(pdev, 0);
++
++ if (irq >= 0)
++ free_irq(irq, drv_data);
++
++ /* Disconnect from the SPI framework */
++ spi_unregister_master(drv_data->master);
++
++ /* Remove the workqueue */
++ destroy_workqueue(drv_data->workqueue);
++
++ iounmap(drv_data->ioaddr);
++
++ /* Prevent double remove */
++ platform_set_drvdata(pdev, NULL);
++
++ clk_put(drv_data->clk);
++ spi_master_put(drv_data->master);
++
++ return 0;
++}
++
++static void spi_ep93xx_shutdown(struct platform_device *pdev)
++{
++ int status = 0;
++
++ if ((status = spi_ep93xx_remove(pdev)) != 0)
++ dev_err(&pdev->dev, "shutdown failed with %d\n", status);
++}
++
++static struct platform_driver ep93xx_spi_platform_driver = {
++ .driver = {
++ .name = "ep93xx-spi",
++ .bus = &platform_bus_type,
++ .owner = THIS_MODULE,
++ },
++ .remove = __exit_p(spi_ep93xx_remove),
++ .shutdown = spi_ep93xx_shutdown,
++};
++
++static int __init spi_ep93xx_init(void)
++{
++ return platform_driver_probe(&ep93xx_spi_platform_driver, spi_ep93xx_probe);
++}
++
++static void __exit spi_ep93xx_exit(void)
++{
++ platform_driver_unregister(&ep93xx_spi_platform_driver);
++}
++
++module_init(spi_ep93xx_init);
++module_exit(spi_ep93xx_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("EP93xx SPI Controller Driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("0.25");
+diff --git a/drivers/spi/spi_ep93xx.h b/drivers/spi/spi_ep93xx.h
+new file mode 100644
+index 0000000..6fad735
+--- /dev/null
++++ b/drivers/spi/spi_ep93xx.h
+@@ -0,0 +1,61 @@
++/*
++ * EP93xx SPI (simple) include
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ * Based on pxa2xx_spi.c by Stephen Street / StreetFire Sound Labs
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++/* SSP Registers */
++#define SSPCR0 0x00 /* Control register 0 */
++#define SSPCR1 0x04 /* Control register 1 */
++#define SSPDR 0x08 /* Receice FIFO data register (16-bit read) */
++ /* Transmit FIFO data register (16-bit write) */
++#define SSPSR 0x0C /* Status register */
++#define SSPCPSR 0x10 /* Clock prescale register (from 2 to 254, even number) */
++#define SSPIxR 0x14 /* Interrupt identification register (read) */
++ /* Interrupt clear register (write) */
++
++/* SSP control registers bit fields & masks */
++#define SSP_CONTROL_SCR(x) (((x) & 0xFF) << 8) /* Serial clock rate = SCLKOUT / CPSDVR / (1+SCR) */
++#define SSP_CONTROL_SPH (1 << 7) /* SCLKOUT phase (for SPI only) */
++#define SSP_CONTROL_SPO (1 << 6) /* SCLKOUT polarity (for SPI only) */
++#define SSP_CONTROL_FRF(x) (((x) & 3) << 4) /* Frame format (0=SPI) */
++#define SSP_CONTROL_DSS_4BIT_DATA 3
++#define SSP_CONTROL_DSS_8BIT_DATA 7
++#define SSP_CONTROL_DSS_15BIT_DATA 14
++#define SSP_CONTROL_DSS_16BIT_DATA 15
++#define SSP_CONTROL_DSS_MASK 0xF
++#define SSP_CONTROL_MS (1 << 5) /* 0=master, 1=slave (can be modified when SSE=0) */
++#define SSP_CONTROL_SSE (1 << 4) /* SSP operation enable (=1), disable (=0) */
++#define SSP_CONTROL_LBM (1 << 3) /* Loop back mode */
++#define SSP_CONTROL_RORIE (1 << 2) /* Interrupt enable : overrun condition */
++#define SSP_CONTROL_TIE (1 << 1) /* Interrupt enable : transmit fifo */
++#define SSP_CONTROL_RIE (1 << 0) /* Interrupt enable : receive fifo */
++
++/* SSP status register (read only) */
++#define SSP_STATUS_BUSY (1 << 4) /* Busy flag (0: SSP is idle) */
++#define SSP_STATUS_RFF (1 << 3) /* Receive fifo full ? (1=full) */
++#define SSP_STATUS_RNE (1 << 2) /* Receive fifo not empty ? (0=empty) */
++#define SSP_STATUS_TNF (1 << 1) /* Transmit fifo not full ? (0=full) */
++#define SSP_STATUS_TFE (1 << 0) /* Transmit fifo empty ? (1=empty) */
++
++/* SSP SSPIIR/SSPICR register (write 1 to clear interrupt) */
++#define SSP_SSPIxx_RORIS (1 << 2) /* Receive fifo overrun interrupt status */
++#define SSP_SSPIxx_TIS (1 << 1) /* Transmit fifo service request interrupt status */
++#define SSP_SSPIxx_RIS (1 << 0) /* Receive fifo service request interrupt status */
++
++/* Default configuration values */
++#define SPI_DEFAULT0 (SSP_CONTROL_DSS_16BIT_DATA | SSP_CONTROL_FRF(0) | SSP_CONTROL_SCR(0))
++#define SPI_DEFAULT1 (SSP_CONTROL_SSE | SSP_CONTROL_RORIE)
++#define SPI_DEFAULT_DIVISOR 254
+diff --git a/drivers/spi/tmp124.c b/drivers/spi/tmp124.c
+new file mode 100644
+index 0000000..d3600f7
+--- /dev/null
++++ b/drivers/spi/tmp124.c
+@@ -0,0 +1,158 @@
++/*
++ * TMP124 SPI protocol driver
++ *
++ * (c) Copyright 2008 Matthieu Crapet <mcrapet@gmail.com>
++ * Based on tle62x0.c by Ben Dooks, <ben@simtec.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Note: The chip uses a '3-wire SPI' (miso and mosi are the same pin).
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/spi/spi.h>
++
++struct tmp124_state {
++ struct spi_device *bus;
++ u8 tx_buff[2];
++ u8 rx_buff[2];
++};
++
++
++static inline int tmp124_write_then_read(struct tmp124_state *st)
++{
++ struct spi_message msg;
++ struct spi_transfer xfer[2] = {
++ {
++ .tx_buf = st->tx_buff,
++ .rx_buf = NULL,
++ .len = 2,
++ .delay_usecs = 1000,
++ }, {
++ .tx_buf = NULL,
++ .rx_buf = st->rx_buff,
++ .len = 2,
++ }
++ };
++
++ spi_message_init(&msg);
++ spi_message_add_tail(&xfer[0], &msg);
++ spi_message_add_tail(&xfer[1], &msg);
++
++ return spi_sync(st->bus, &msg);
++}
++
++
++static ssize_t tmp124_temperature_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct tmp124_state *st = dev_get_drvdata(dev);
++ int ret;
++
++ st->tx_buff[0] = 0x80;
++ st->tx_buff[1] = 0x00;
++
++ ret = tmp124_write_then_read(st);
++ if (ret < 0) {
++ dev_err(&st->bus->dev, "tmp124_write_then_read\n");
++ ret = 0;
++ } else {
++ signed short v = (st->rx_buff[0] << 8) + st->rx_buff[1];
++ signed long val;
++
++ val = v >> 3;
++
++ /* 2 digit precision (0.0625*100) */
++ val = (val * 50) / 8;
++ ret = snprintf(buf, PAGE_SIZE, "%ld.%02ld\n", val/100, abs(val%100));
++ }
++ return ret;
++}
++
++
++static DEVICE_ATTR(temperature, S_IRUGO, tmp124_temperature_show, NULL);
++
++
++static int __devinit tmp124_probe(struct spi_device *spi)
++{
++ struct tmp124_state *st;
++ int ret;
++
++ st = kzalloc(sizeof(struct tmp124_state), GFP_KERNEL);
++ if (st == NULL) {
++ dev_err(&spi->dev, "no memory for device state\n");
++ return -ENOMEM;
++ }
++
++ /* required config */
++ spi->bits_per_word = 16;
++
++ st->bus = spi;
++
++ ret = spi_setup(spi);
++ if (ret) {
++ dev_err(&spi->dev, "setup device\n");
++ goto err;
++ }
++
++ ret = device_create_file(&spi->dev, &dev_attr_temperature);
++ if (ret) {
++ dev_err(&spi->dev, "cannot create temperature attribute\n");
++ goto err;
++ }
++
++ spi_set_drvdata(spi, st);
++ return 0;
++
++err:
++ kfree(st);
++ return ret;
++}
++
++
++static int __devexit tmp124_remove(struct spi_device *spi)
++{
++ struct tmp124_state *st = spi_get_drvdata(spi);
++
++ device_remove_file(&spi->dev, &dev_attr_temperature);
++ kfree(st);
++
++ return 0;
++}
++
++
++static struct spi_driver tmp124_driver = {
++ .driver = {
++ .name = "tmp124",
++ .owner = THIS_MODULE,
++ },
++ .probe = tmp124_probe,
++ .remove = __devexit_p(tmp124_remove),
++};
++
++static __init int tmp124_init(void)
++{
++ return spi_register_driver(&tmp124_driver);
++}
++
++static __exit void tmp124_exit(void)
++{
++ spi_unregister_driver(&tmp124_driver);
++}
++
++module_init(tmp124_init);
++module_exit(tmp124_exit);
++
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("TMP124 SPI Protocol Driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("0.1");
+--
+1.6.0.4
+
--- /dev/null
+From d4ed3962171cdc235c9a55f864bf4db856224d0a Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 19:46:15 +0100
+Subject: [PATCH] ep93xx_cpufreq
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ arch/arm/Kconfig | 12 ++
+ arch/arm/mach-ep93xx/Makefile | 2 +
+ arch/arm/mach-ep93xx/cpufreq.c | 291 ++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 305 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-ep93xx/cpufreq.c
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 0f1d52f..05eab87 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -294,6 +294,7 @@ config ARCH_EP93XX
+ select COMMON_CLKDEV
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_HOLES_MEMORYMODEL
++ select ARCH_HAS_CPUFREQ
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
+@@ -1350,6 +1351,17 @@ config CPU_FREQ_INTEGRATOR
+
+ If in doubt, say Y.
+
++config CPU_FREQ_EP93XX
++ tristate "CPUfreq driver for EP93XX CPUs"
++ depends on ARCH_EP93XX && CPU_FREQ
++ default n
++ help
++ This enables the CPUfreq driver for EP9301 CPUs. Not tested with EP9302.
++
++ For details, take a look at <file:Documentation/cpu-freq>.
++
++ If in doubt, say N.
++
+ config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
+index 8624d62..f8d126c 100644
+--- a/arch/arm/mach-ep93xx/Makefile
++++ b/arch/arm/mach-ep93xx/Makefile
+@@ -6,6 +6,8 @@ obj-m :=
+ obj-n :=
+ obj- :=
+
++obj-$(CONFIG_CPU_FREQ_EP93XX) += cpufreq.o
++
+ obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
+ obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
+ obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+diff --git a/arch/arm/mach-ep93xx/cpufreq.c b/arch/arm/mach-ep93xx/cpufreq.c
+new file mode 100644
+index 0000000..9188e5c
+--- /dev/null
++++ b/arch/arm/mach-ep93xx/cpufreq.c
+@@ -0,0 +1,291 @@
++/*
++ * cpufreq.c: clock scaling for Cirrus EP93XX embedded chip
++ *
++ * Copyright (C) 2008 Matthieu Crapet <mcrapet@gmail.com>
++ *
++ * Based on "cpu-ep93xx.c" driver (for 2.4 kernel) by
++ * Bob Lees bob@diamond.demon.co.uk (Diamond Consulting Services Ltd)
++ * Ideas taken from "clock.c" by Lennert Buytenhek <buytenh@wantstofly.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * Theory of operations
++ * ====================
++ *
++ * Clock scaling can be used to lower the power consumption of the CPU
++ * core. For this processor the major power saving is reducing the mem clk.
++ *
++ * The ep93xx has 2 registers to control the 2 PLLs of the ep93xx:
++ * PLL1 controls the cpu, bus and peripheral clocks;
++ * PLL2 controls the USB, MIR and ADC clocks.
++ *
++ * ClkSet1 (EP93XX_SYSCON_CLOCK_SET1) 0x80930020 Clock speed control 1 (i.e. PLL1 config)
++ * ClkSet2 (EP93XX_SYSCON_CLOCK_SET2) 0x80930024 Clock speed control 2 (i.e. PLL2 config)
++ *
++ * This driver only focus on PLL1. The pll has two multipliers/dividers:
++ * Fout = 14.7456 * (PLL1_X1FBD + 1) * (PLL1_X2FBD + 1) / ((PLL1_X2IPD + 1) * 2 ^ PLL1_PS)
++ * = 14.7456 * (PLL1_X1FBD + 1) * (PLL1_X2FBD + 1) / (PLL1_X2IPD + 1) / 2 ^ PLL1_PS
++ *
++ * PLL1_X2 output (before the PS divide), must be > 290Mhz and <= 528Mhz
++ *
++ * fclk [processor ] = pll1 / fclk_divisor
++ * hclk [AHB bus clock] = pll1 / hclk_divisor
++ * pclk [APB bus clock] = hclk / pclk_divisor
++ * fclk >= hclk > pclk
++ *
++ * EP9301 EP9302/07/12/15
++ * PLL1 fout max (MHz) 528 528
++ * fclk min (MHz) 12.9 12.9
++ * fclk max (MHz) 166 200
++ * hclk max (MHz) 66 100
++ * pclk max (MHz) 50 50
++ *
++ * Notes:
++ * - This driver does not use the clk_{get,put,roundrate} (clock.c) functions.
++ * That's quite dirty, but clock.c is not complete yet.
++ * - Significant power saving is made by lowering hclk not fclk.
++ * - Ethernet (100 MBit) doesn't work with hclk < 25MHz.
++ * - Is it safe to have fclk = hclk ?
++ * - calc_pll_rate is taken from clock.c (Lennert Buytenhek)
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/cpufreq.h>
++#include <mach/hardware.h>
++
++
++/* ClkSet1 register */
++#define SYSCON_CLKSET1_PLL1_PS_SHIFT 16
++#define SYSCON_CLKSET1_PCLK_DIV_SHIFT 18
++#define SYSCON_CLKSET1_HCLK_DIV_SHIFT 20
++#define SYSCON_CLKSET1_FCLK_DIV_SHIFT 25
++
++#define CLKSET1(p, pl, pd, h, f) ( p | \
++ ( pl << SYSCON_CLKSET1_PLL1_PS_SHIFT) | \
++ ( pd << SYSCON_CLKSET1_PCLK_DIV_SHIFT)| \
++ ( h << SYSCON_CLKSET1_HCLK_DIV_SHIFT) | \
++ ( f << SYSCON_CLKSET1_FCLK_DIV_SHIFT))
++
++/* SMC_ROM = 0, nBYP1 = 1 */
++#define PLL1_MASK(x1fbd1,x1fbd2,x2ipd) (0x800000 | (x1fbd1 << 11) | (x1fbd2 << 5) | (x2ipd))
++
++typedef struct {
++ int speed; /* in kHz */
++ u32 preset; /* x1fbd, x2fbd and x2ipd are left unchanged */
++ u32 pll1_ps; /* sets final divide from pll */
++ u32 pdiv; /* sets pclk, peripheral clk (division of hclk) */
++ u32 hdiv; /* sets hclk, bus (memory) clk */
++ u32 fdiv; /* sets fclk, processor clk */
++} ep93xx_speed_settings_t;
++
++static const char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
++
++
++/* Suitable for EP9301. PLL1 rate (without final PS divider):
++ - PLL1_RATE(19,17,15) = 331.776 MHz
++ - PLL1_MASK(19, 7, 7) = 294.912 MHz
++ */
++static const ep93xx_speed_settings_t ep93xx_clkset1_settings[] =
++{
++ /* { speed, preset, pll1_ps, pdiv, hdiv, fdiv } */
++ { 165888, PLL1_MASK(19,17,15), 0, 1, 3, 1 }, /* [0x02B49A2F] fclk=165.9 (fdiv=2), hclk=66.4 (hdiv=5), pclk=33.2 (pdiv=2), ps=1 */
++ { 165887, PLL1_MASK(19,17,15), 1, 1, 3, 0 }, /* [0x00B59A2F] fclk=165.9 (fdiv=1), hclk=33.2 (hdiv=5), pclk=16.6 (pdiv=2), ps=2 */
++ { 147456, PLL1_MASK(19, 7, 7), 0, 1, 3, 1 }, /* [0x02B498E7] fclk=147.5 (fdiv=2), hclk=59.0 (hdiv=5), pclk=29.5 (pdiv=2), ps=1 */
++ { 147455, PLL1_MASK(19, 7, 7), 0, 2, 3, 1 }, /* [0x02B898E7] fclk=147.5 (fdiv=2), hclk=59.0 (hdiv=5), pclk=14.7 (pdiv=4), ps=1 */
++ { 73728, PLL1_MASK(19, 7, 7), 0, 1, 3, 2 }, /* [0x04B498E7] fclk=73.7 (fdiv=4), hclk=59.0 (hdiv=5), pclk=29.5 (pdiv=2), ps=1 */
++ { 82944, PLL1_MASK(19,17,15), 0, 1, 3, 2 }, /* [0x04B49A2F] fclk=82.9 (fdiv=4), hclk=66.4 (hdiv=5), pclk=33.2 (pdiv=2), ps=1 */
++ { 82943, PLL1_MASK(19,17,15), 0, 1, 4, 2 }, /* [0x04C49A2F] fclk=82.9 (fdiv=4), hclk=55.3 (hdiv=6), pclk=27.6 (pdiv=2), ps=1 */
++ { 82942, PLL1_MASK(19,17,15), 1, 1, 2, 1 }, /* [0x02A59A2F] fclk=82.9 (fdiv=2), hclk=41.5 (hdiv=4), pclk=20.7 (pdiv=2), ps=2 */
++ { 41472, PLL1_MASK(19,17,15), 0, 1, 5, 3 }, /* [0x06D49A2F] fclk=41.5 (fdiv=8), hclk=41.5 (hdiv=8), pclk=20.7 (pdiv=2), ps=1 */
++};
++
++#if 0
++/* Suitable for EP9302/07/12/15. Assumed: PLL1 = 400.1 MHz (X1FBD1=23, X1FBD2=25, X2IPD=22) */
++static ep93xx_speed_settings_t ep93xx_clkset1_settings[] =
++{
++ /* { speed, preset, pll1_ps, pdiv, hdiv, fdiv } */
++ { 200027, 0x0080bb36, 0, 1, 2, 1 }, /* [0x02A4BB36] fclk=200.0 (fdiv=2), hclk=100.0 (hdiv=4), pclk=50.0 (pdiv=2), ps=1 */
++ { 200026, 0x0080bb36, 0, 1, 3, 1 }, /* [0x02B4BB36] fclk=200.0 (fdiv=2), hclk=80.0 (hdiv=5), pclk=40.0 (pdiv=2), ps=1 */
++ { 200025, 0x0080bb36, 0, 1, 4, 1 }, /* [0x02C4BB36] fclk=200.0 (fdiv=2), hclk=66.7 (hdiv=6), pclk=33.3 (pdiv=2), ps=1 */
++ { 100013, 0x0080bb36, 0, 1, 3, 2 }, /* [0x04B4BB36] fclk=100.0 (fdiv=4), hclk=80.0 (hdiv=5), pclk=40.0 (pdiv=2), ps=1 */
++ { 100012, 0x0080bb36, 1, 1, 2, 1 }, /* [0x02A5BB36] fclk=100.0 (fdiv=2), hclk=50.0 (hdiv=4), pclk=25.0 (pdiv=2), ps=2 */
++ { 100011, 0x0080bb36, 1, 1, 1, 1 }, /* [0x0295BB36] fclk=100.0 (fdiv=2), hclk=100.0 (hdiv=2), pclk=50.0 (pdiv=2), ps=2 */
++ { 50006, 0x0080bb36, 2, 1, 2, 1 }, /* [0x02A6BB36] fclk=50.0 (fdiv=2), hclk=25.0 (hdiv=4), pclk=12.5 (pdiv=2), ps=4 */
++ { 50005, 0x0080bb36, 2, 1, 1, 1 }, /* [0x0296BB36] fclk=50.0 (fdiv=2), hclk=50.0 (hdiv=2), pclk=25.0 (pdiv=2), ps=4 */
++ { 25003, 0x0080bb36, 3, 1, 1, 1 }, /* [0x0297BB36] fclk=25.0 (fdiv=2), hclk=25.0 (hdiv=2), pclk=12.5 (pdiv=2), ps=8 */
++};
++#endif
++
++
++static unsigned long calc_pll_rate(u32 config_word)
++{
++ unsigned long long rate;
++
++ rate = 14745600;
++ rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD (5 bits) */
++ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD (6 bits) */
++ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD (5 bits) */
++ rate = rate >> ((config_word >> 16) & 3); /* PS (2 bits) */
++
++ return (unsigned long)rate;
++}
++
++
++static const ep93xx_speed_settings_t *ep93xx_find_clkset1(unsigned int khz, unsigned int relation)
++{
++ int i;
++ const ep93xx_speed_settings_t *p = &ep93xx_clkset1_settings[0];
++
++ switch (relation) {
++ case CPUFREQ_RELATION_L: /* lowest frequency at or above target */
++ for (i = 0; i < ARRAY_SIZE(ep93xx_clkset1_settings); i++) {
++ if (ep93xx_clkset1_settings[i].speed < khz)
++ continue;
++ if (p->speed > ep93xx_clkset1_settings[i].speed) // take lowest value
++ p = &ep93xx_clkset1_settings[i];
++ }
++ break;
++
++ case CPUFREQ_RELATION_H: /* highest frequency below or at target */
++ for (i = 0; i < ARRAY_SIZE(ep93xx_clkset1_settings); i++) {
++ if (ep93xx_clkset1_settings[i].speed > khz)
++ continue;
++ if (p->speed < ep93xx_clkset1_settings[i].speed) // take highest value
++ p = &ep93xx_clkset1_settings[i];
++ }
++ break;
++ }
++
++ return p;
++}
++
++
++static int ep93xx_verify_speed(struct cpufreq_policy *policy)
++{
++ if (policy->cpu != 0)
++ return -EINVAL;
++
++ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
++
++ return 0;
++}
++
++
++static unsigned int ep93xx_get_speed(unsigned int cpu)
++{
++ unsigned int freq;
++ u32 value;
++
++ if (cpu)
++ return 0;
++
++ value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
++ if (!(value & 0x00800000)) { /* PLL1 bypassed? */
++ freq = 14745600;
++ } else {
++ freq = calc_pll_rate(value);
++ }
++ freq /= fclk_divisors[(value >> 25) & 0x7];
++
++ freq = (freq + 500) / 1000; /* rounded result in kHz */
++ return freq;
++}
++
++
++static int ep93xx_set_target(struct cpufreq_policy *policy,
++ unsigned int target_freq,
++ unsigned int relation)
++{
++ struct cpufreq_freqs freqs;
++ const ep93xx_speed_settings_t *config;
++ u32 value;
++
++ config = ep93xx_find_clkset1(target_freq, relation);
++
++ freqs.old = ep93xx_get_speed(0);
++ freqs.new = config->speed;
++ freqs.cpu = 0;
++ freqs.flags = 0;
++
++ pr_debug("ep93xx: target_freq=%d, old=%d new=%d (kHz) rel=%d\n", target_freq, freqs.old, freqs.new, relation);
++
++ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++
++ value = CLKSET1(config->preset, config->pll1_ps,
++ config->pdiv, config->hdiv, config->fdiv);
++ __raw_writel(value, EP93XX_SYSCON_CLOCK_SET1);
++
++ /* 5 nops required to flush instruction pipeline */
++ __asm__ __volatile__("nop; nop; nop; nop; nop");
++
++ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++ return 0;
++}
++
++
++static int __init ep93xx_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++ printk(KERN_INFO "ep93xx-cpufreq: driver v1.01\n");
++
++ if (policy->cpu != 0)
++ return -EINVAL;
++
++ policy->cur = ep93xx_get_speed(0);
++ policy->min = 25000;
++
++ policy->cpuinfo.min_freq = 13000;
++
++ /* All EP93xx are running up to 200Mhz, except EP9301 */
++ if (policy->cur <= 166000)
++ policy->cpuinfo.max_freq = 166000;
++ else
++ policy->cpuinfo.max_freq = 200000;
++
++ policy->cpuinfo.transition_latency = 1600000; /* 8..16ms (according to datasheet) */
++ policy->max = policy->cpuinfo.max_freq;
++
++ return 0;
++}
++
++static struct cpufreq_driver ep93xx_driver = {
++ .flags = CPUFREQ_STICKY,
++ .verify = ep93xx_verify_speed,
++ .target = ep93xx_set_target,
++ .get = ep93xx_get_speed,
++ .init = ep93xx_cpufreq_driver_init,
++ .name = "ep93xx",
++};
++
++
++static int __init ep93xx_cpufreq_init(void)
++{
++ return cpufreq_register_driver(&ep93xx_driver);
++}
++module_init(ep93xx_cpufreq_init);
++
++static void __exit ep93xx_cpufreq_exit(void)
++{
++ cpufreq_unregister_driver(&ep93xx_driver);
++}
++module_exit(ep93xx_cpufreq_exit);
++
++MODULE_DESCRIPTION("CPU frequency scaling driver for EP93xx");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("1.01");
+--
+1.6.0.4
+
--- /dev/null
+From 3c225a7077a7e9f0575fdfe6209342b5eb073b60 Mon Sep 17 00:00:00 2001
+From: Matthieu Crapet <mcrapet@gmail.com>
+Date: Sun, 17 Jan 2010 19:50:34 +0100
+Subject: [PATCH] ts7200_nor_flash
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+
+Signed-off-by: Petr Štetiar <ynezz@true.cz>
+---
+ drivers/mtd/maps/Kconfig | 8 +++
+ drivers/mtd/maps/Makefile | 1 +
+ drivers/mtd/maps/ts7200_flash.c | 106 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 115 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/mtd/maps/ts7200_flash.c
+
+diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
+index 14be075..bc20ac9 100644
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -445,6 +445,14 @@ config MTD_OMAP_NOR
+ These boards include the Innovator, H2, H3, OSK, Perseus2, and
+ more. If you have such a board, say 'Y'.
+
++config MTD_TS7200_NOR
++ tristate "Technologic Systems TS-7200 flash 8Mb"
++ depends on MTD_CFI && ARCH_EP93XX
++ help
++ This provides a map driver for the on-board flash of the Technologic
++ System's TS-7200 board. The 8MB flash is splitted into 3 partitions
++ which are accessed as separate MTD devices.
++
+ # This needs CFI or JEDEC, depending on the cards found.
+ config MTD_PCI
+ tristate "PCI MTD driver"
+diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
+index ae2f6db..fb04757 100644
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
+ obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+ obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
+ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
++obj-$(CONFIG_MTD_TS7200_NOR) += ts7200_flash.o
+ obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
+ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
+ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
+diff --git a/drivers/mtd/maps/ts7200_flash.c b/drivers/mtd/maps/ts7200_flash.c
+new file mode 100644
+index 0000000..efc5f00
+--- /dev/null
++++ b/drivers/mtd/maps/ts7200_flash.c
+@@ -0,0 +1,106 @@
++/*
++ * ts7200_flash.c - mapping for TS-7200 SBCs (8mb NOR flash)
++ * No platform_device resource is used here. All is hardcoded.
++ *
++ * (c) Copyright 2006 Matthieu Crapet <mcrapet@gmail.com>
++ * Based on ts5500_flash.c by Sean Young <sean@mess.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <asm/io.h>
++#include <asm/sizes.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++
++#define WINDOW_ADDR 0x60000000
++#define WINDOW_SIZE SZ_8M
++#define WINDOW_READABLE_SIZE (WINDOW_SIZE/SZ_1M)
++
++
++static struct mtd_info *mymtd;
++
++static struct map_info ts7200nor_map = {
++ .name = "Full TS-7200 NOR flash",
++ .size = WINDOW_SIZE,
++ .bankwidth = 2,
++ .phys = WINDOW_ADDR,
++};
++
++/*
++ * MTD partitioning stuff
++ */
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition static_partitions[] =
++{
++ {
++ .name = "TS-BOOTROM",
++ .offset = 0,
++ .size = 0x20000,
++ .mask_flags = MTD_WRITEABLE, /* force read-only */
++ },
++ {
++ .name = "RootFS",
++ .offset = 0x20000,
++ .size = 0x600000,
++ },
++ {
++ .name = "Redboot",
++ .offset = 0x620000,
++ .size = MTDPART_SIZ_FULL, /* up to the end */
++ },
++};
++#endif
++
++int __init init_ts7200nor(void)
++{
++ printk(KERN_NOTICE "TS-7200 flash mapping: %dmo at 0x%x\n", WINDOW_READABLE_SIZE, WINDOW_ADDR);
++
++ ts7200nor_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
++ if (!ts7200nor_map.virt) {
++ printk("ts7200_flash: failed to ioremap\n");
++ return -EIO;
++ }
++
++ simple_map_init(&ts7200nor_map);
++ mymtd = do_map_probe("cfi_probe", &ts7200nor_map);
++ if (mymtd) {
++ mymtd->owner = THIS_MODULE;
++ add_mtd_device(mymtd);
++#ifdef CONFIG_MTD_PARTITIONS
++ return add_mtd_partitions(mymtd, static_partitions, ARRAY_SIZE(static_partitions));
++#else
++ return 0;
++#endif
++ }
++
++ iounmap((void *)ts7200nor_map.virt);
++ return -ENXIO;
++}
++
++static void __exit cleanup_ts7200nor(void)
++{
++ if (mymtd) {
++ del_mtd_device(mymtd);
++ map_destroy(mymtd);
++ }
++ if (ts7200nor_map.virt) {
++ iounmap((void *)ts7200nor_map.virt);
++ ts7200nor_map.virt = 0;
++ }
++}
++
++module_init(init_ts7200nor);
++module_exit(cleanup_ts7200nor);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>");
++MODULE_DESCRIPTION("MTD map driver for TS-7200 board (" __MODULE_STRING(WINDOW_READABLE_SIZE) "MB flash version)");
+--
+1.6.0.4
+
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc3
+# Sun Oct 11 19:14:09 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-m"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Cirrus EP93xx Implementation Options
+#
+# CONFIG_CRUNCH is not set
+CONFIG_CR1_NFBIT=y
+
+#
+# EP93xx Platforms
+#
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+# CONFIG_MACH_ADSSPHERE is not set
+# CONFIG_MACH_EDB9301 is not set
+# CONFIG_MACH_EDB9302 is not set
+# CONFIG_MACH_EDB9307 is not set
+# CONFIG_MACH_EDB9312 is not set
+# CONFIG_MACH_EDB9315 is not set
+# CONFIG_MACH_GESBC9312 is not set
+# CONFIG_MACH_MICRO9H is not set
+# CONFIG_MACH_MICRO9M is not set
+# CONFIG_MACH_MICRO9L is not set
+CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
+CONFIG_MACH_TS72XX_FORCE_MACHINEID=y
+CONFIG_MACH_TS72XX_SBCINFO=m
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=192.168.1.50 nfsroot=192.168.1.48:/home/matt/TS-7200/nfsroot"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_TS7250=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+CONFIG_EP93XX_PWM=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_TS72XX_MAX197=m
+CONFIG_TS72XX_MAX197_AVERAGE=y
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_EP93XX=m
+CONFIG_KEYBOARD_TS72XX=m
+CONFIG_KEYBOARD_GPIO=m
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_TS_SER1=m
+CONFIG_SERIAL_8250_TS_SER1_IRQ=5
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL010_TS72XX=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_PL022 is not set
+CONFIG_SPI_EP93XX=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPI_TMP124=y
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=m
+CONFIG_TS72XX_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_TS72XX_CONSOLE=m
+CONFIG_TS72XX_CONSOLE_COLUMNS=20
+CONFIG_TS72XX_CONSOLE_ROWS=4
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=m
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
require linux.inc
-PR = "r8"
+PR = "r9"
S = "${WORKDIR}/linux-${PV}"
DEFAULT_PREFERENCE_ben-nanonote = "-1"
DEFAULT_PREFERENCE_jornada6xx = "-1"
DEFAULT_PREFERENCE_jornada7xx = "-1"
+DEFAULT_PREFERENCE_ts72xx = "-1"
SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.9.bz2;patch=1 \
file://ep93xx/ep93xx-spi.patch;patch=1 \
file://ep93xx/ep93xx-cpuinfo.patch;patch=1 "
+SRC_URI_append_ts72xx = " \
+ file://0001-ts72xx_base.patch;patch=1 \
+ file://0002-ts72xx_force_machine-id.patch;patch=1 \
+ file://0003-ep93xx_cpuinfo.patch;patch=1 \
+ file://0004-ts72xx_sbcinfo.patch;patch=1 \
+ file://0005-ep93xx_eth.patch;patch=1 \
+ file://0006-ts72xx_ts_ser1.patch;patch=1 \
+ file://0007-ts72xx_rs485.patch;patch=1 \
+ file://0008-ts72xx_ts_eth100.patch;patch=1 \
+ file://0009-ts7200_cf_ide.patch;patch=1 \
+ file://0010-ts72xx_pata.patch;patch=1 \
+ file://0011-ep93xx_pm.patch;patch=1 \
+ file://0012-ts72xx_gpio_i2c.patch;patch=1 \
+ file://0013-ts72xx_dio_keypad.patch;patch=1 \
+ file://0014-ep93xx_spi.patch;patch=1 \
+ file://0015-ep93xx_cpufreq.patch;patch=1 \
+ file://0016-ts7200_nor_flash.patch;patch=1 \
+ "
+
# Zaurus family bootloader patches
RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
ZAURUSPATCHES = " ${RPSRC}/pxa-linking-bug-r1.patch;patch=1;status=unmergable;name=pxa-linking-bug-r1 "
git.openpandora.org / openembedded.git / commitdiff