run-qemu.sh: Add qemumipsel target

Signed-off-by: Khem Raj <raj.khem@gmail.com>

diff --git a/contrib/qemu/run-qemu.sh b/contrib/qemu/run-qemu.sh
index 92df17c..068fd3e 100755 (executable)
--- a/contrib/qemu/run-qemu.sh
+++ b/contrib/qemu/run-qemu.sh
@@ -9,7 +9,7 @@
 
 # on debian-like systems
 # set up bridge aptitude install bridge-utils
-# 
+#
 # change /etc/network/interfaces to something like below and restart
 # network
 
@@ -18,9 +18,9 @@
 #
 #auto br0
 #iface br0 inet static
-#        address 10.0.1.37
-#        netmask 255.255.0.0
-#        gateway 10.0.0.1
+#        address 192.168.1.1
+#        netmask 255.255.255.0
+#        gateway 192.168.1.254
 #        bridge_ports eth0
 #        bridge_maxwait 0
 #        bridge_fd 9
@@ -54,7 +54,7 @@
 #              from dhcp server. Note that this option is not entertained if networking
 #              is disabled
 
-supported_archs="{arm mips ppc sh4 x86}"
+supported_archs="{arm mips mipsel ppc sh4 x86}"
 if [ $# -lt 2 ]; then
     echo -en "
     Usage: `basename $0` <arch> <libc>
@@ -75,73 +75,85 @@ staticip="yes"
 
 case $arch in
     arm)
-       address="10.0.1.101"
-        macaddr="00:16:3e:00:00:01"
+       address="192.168.1.101"
+       macaddr="00:16:3e:00:00:01"
        machine="versatilepb"
        gdbport="1234"
        consoleopt="console=ttyAMA0 console=ttyS0"
        rootdisk="sda"
        qemuopts="-nographic"
-        kernel="zImage"
-        image="native-sdk-image"
-        ;;
+       kernel="zImage"
+       image="native-sdk-image"
+       ;;
     mips)
-       address="10.0.1.102"
-        macaddr="00:16:3e:00:00:02"
+       address="192.168.1.102"
+       macaddr="00:16:3e:00:00:02"
        machine="malta"
        gdbport="1235"
-        consoleopt="console=ttyS0"
+       consoleopt="console=ttyS0"
        rootdisk="hda"
        qemuopts="-nographic"
-        kernel="vmlinux"
-        image="native-sdk-image"
-        ;;
+       kernel="vmlinux"
+       image="native-sdk-image"
+       ;;
+    mipsel)
+       address="192.168.1.103"
+       macaddr="00:16:3e:00:00:03"
+       machine="malta"
+       gdbport="1235"
+       consoleopt="console=ttyS0"
+       rootdisk="hda"
+       qemuopts="-nographic"
+       kernel="vmlinux"
+       image="native-sdk-image"
+       ;;
     ppc|powerpc)
-       arch=ppc
-       address="10.0.1.103"
-        macaddr="00:16:3e:00:00:03"
+       arch=ppc
+       address="192.168.1.104"
+       macaddr="00:16:3e:00:00:04"
        machine="g3beige"
        gdbport="1236"
        mem="1024"
-        consoleopt="console=ttyS0"
+       consoleopt="console=ttyS0"
        rootdisk="hdc"
        qemuopts="-nographic"
-        kernel="vmlinux"
-        image="minimalist-image"
-        ;;
+       kernel="vmlinux"
+       image="minimalist-image"
+       ;;
     sh|sh4)
-       arch=sh4
-       address="10.0.1.104"
-        macaddr="00:16:3e:00:00:04"
+       arch=sh4
+       address="192.168.1.105"
+       macaddr="00:16:3e:00:00:05"
        machine="r2d"
        gdbport="1237"
        mem="512"
-        consoleopt="console=ttySC1 noiotrap earlyprintk=sh-sci.1"
+       consoleopt="console=ttySC1 noiotrap earlyprintk=sh-sci.1"
        rootdisk="sda"
        qemuopts="-monitor null -serial vc -serial stdio"
-        kernel="zImage"
-        image="minimalist-image"
-        ;;
+       kernel="zImage"
+       image="minimalist-image"
+       ;;
     x86)
-       address="10.0.1.105"
-        macaddr="00:16:3e:00:00:05"
+       address="192.168.1.106"
+       macaddr="00:16:3e:00:00:06"
        gdbport="1237"
        machine="pc"
-        consoleopt="console=ttyS0"
+       mem="1024"
+       consoleopt="console=ttyS0"
        rootdisk="hda"
-       qemuopts="-nographic"
-        kernel="bzImage"
-        image="minimalist-image"
-        ;;
+       qemuopts=""
+       kernel="bzImage"
+       image="minimalist-image"
+       ;;
     *)
-        echo "Specify one architectures out of $supported_archs to emulate."
-       exit 1
-       ;;
+       echo "Specify one architectures out of $supported_archs to emulate."
+       exit 1
+       ;;
     esac
 
-nfsserver="10.0.1.37"          # address of NFS server
-gateway="10.0.0.1"             # default gateway
-netmask="255.255.0.0"          # subnet mask
+nfsserver="192.168.1.1"                # address of NFS server
+gateway="192.168.1.254"                # default gateway
+netmask="255.255.255.0"                # subnet mask
 hostname="qemu$arch"           # hostname for guest server
 nfsdir="/opt/oe/$hostname"     # nfs directory where root file system is
 device="eth0"                  # interface that guest server will use
@@ -155,7 +167,7 @@ oesrcdir=$HOME/work/oe/openembedded
 nfsopts="rsize=8192,wsize=8192,hard,intr,tcp,nolock"   # nfs options
 
 if [ $nfsboot = "yes" ]; then
-       # for NFS root 
+       # for NFS root
        rootfs="root=/dev/nfs rw nfsroot=$nfsserver:$nfsdir,$nfsopts"
        # without networking nfsroot wouldnt be possible so enable it explicitly.
        networking="yes"