# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
#
+# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# command after changing this file, to see if there are
+# any tracked files which get ignored after the change.
+#
# Normal rules
#
.*
*.lst
*.symtypes
*.order
+*.elf
+*.bin
+*.gz
#
# Top-level generic files
#
tags
TAGS
-vmlinux*
-!vmlinux.lds.S
+vmlinux
System.map
Module.markers
Module.symvers
!.gitignore
+!.mailmap
#
# Generated include files
runs an instance of gdb against the vmlinux file which contains
the symbols (not boot image such as bzImage, zImage, uImage...).
In gdb the developer specifies the connection parameters and
- connects to kgdb. Depending on which kgdb I/O modules exist in
- the kernel for a given architecture, it may be possible to debug
- the test machine's kernel with the development machine using a
- rs232 or ethernet connection.
+ connects to kgdb. The type of connection a developer makes with
+ gdb depends on the availability of kgdb I/O modules compiled as
+ builtin's or kernel modules in the test machine's kernel.
</para>
</chapter>
<chapter id="CompilingAKernel">
</para>
<para>
IMPORTANT NOTE: Using this option with kgdb over the console
- (kgdboc) or kgdb over ethernet (kgdboe) is not supported.
+ (kgdboc) is not supported.
</para>
</sect1>
</chapter>
(gdb) target remote /dev/ttyS0
</programlisting>
<para>
- Example (kgdb to a terminal server):
+ Example (kgdb to a terminal server on tcp port 2012):
</para>
<programlisting>
% gdb ./vmlinux
- (gdb) target remote udp:192.168.2.2:6443
- </programlisting>
- <para>
- Example (kgdb over ethernet):
- </para>
- <programlisting>
- % gdb ./vmlinux
- (gdb) target remote udp:192.168.2.2:6443
+ (gdb) target remote 192.168.2.2:2012
</programlisting>
<para>
Once connected, you can debug a kernel the way you would debug an
* SA E200
* SA E200i
* SA E500
+ * SA P212
+ * SA P410
+ * SA P410i
+ * SA P411
+ * SA P812
Detecting drive failures:
-------------------------
2 : search cores in a package.
3 : search cpus in a node [= system wide on non-NUMA system]
( 4 : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5 : search system wide [on NUMA system] )
This file is per-cpuset and affect the sched domain where the cpuset
belongs to. Therefore if the flag 'sched_load_balance' of a cpuset
Why: Implementation became generic; users should now include
linux/semaphore.h instead.
Who: Matthew Wilcox <willy@linux.intel.com>
+
+---------------------------
+
+What: CONFIG_THERMAL_HWMON
+When: January 2009
+Why: This option was introduced just to allow older lm-sensors userspace
+ to keep working over the upgrade to 2.6.26. At the scheduled time of
+ removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who: Rene Herman <rene.herman@gmail.com>
Setting it to very large values will improve
performance.
-barrier=1 This enables/disables barriers. barrier=0 disables
- it, barrier=1 enables it.
+barrier=<0|1(*)> This enables/disables the use of write barriers in
+ the jbd code. barrier=0 disables, barrier=1 enables.
+ This also requires an IO stack which can support
+ barriers, and if jbd gets an error on a barrier
+ write, it will disable again with a warning.
+ Write barriers enforce proper on-disk ordering
+ of journal commits, making volatile disk write caches
+ safe to use, at some performance penalty. If
+ your disks are battery-backed in one way or another,
+ disabling barriers may safely improve performance.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
+ resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
subsystem_vendor PCI subsystem vendor (ascii, ro)
------------------------------------------------
The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
Note that motherboards vary widely in the connections to sensor chips.
There is no standard that ensures, for example, that the second
will have to implement conversion, labeling and hiding of inputs. For
this reason, it is still not recommended to bypass the library.
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
Each chip gets its own directory in the sysfs /sys/devices tree. To
find all sensor chips, it is easier to follow the device symlinks from
/sys/class/hwmon/hwmon*.
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
All sysfs values are fixed point numbers.
There is only one value per file, unlike the older /proc specification.
A kset keeps its children in a standard kernel linked list. Kobjects point
back to their containing kset via their kset field. In almost all cases,
-the kobjects belonging to a ket have that kset (or, strictly, its embedded
+the kobjects belonging to a kset have that kset (or, strictly, its embedded
kobject) in their parent.
As a kset contains a kobject within it, it should always be dynamically
In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
events for switches:
-SW_RADIO T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL T60 and later hardare rfkill rocker switch
SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hot-key ACPI HKEY event map:
0 -> Unknown board (au0828)
- 1 -> Hauppauge HVR950Q (au0828) [2040:7200]
+ 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI EC DRIVER
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI FAN DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI PCI HOTPLUG DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI VIDEO DRIVER
P: Rui Zhang
M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI WMI DRIVER
AD1889 ALSA SOUND DRIVER
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
P: Thibaut Varene
M: T-Bone@parisc-linux.org
W: http://wiki.parisc-linux.org/AD1889
S: Supported
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P: Eliezer Tamir
-M: eliezert@broadcom.com
+P: Eilon Greenstein
+M: eilong@broadcom.com
L: netdev@vger.kernel.org
S: Supported
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
+W: http://oss.sgi.com/projects/cpusets/
S: Supported
CRAMFS FILESYSTEM
HARMONY SOUND DRIVER
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
L: linux-parisc@vger.kernel.org
S: Maintained
PARISC ARCHITECTURE
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
P: Matthew Wilcox
M: matthew@wil.cx
P: Grant Grundler
PPP OVER ETHERNET
P: Michal Ostrowski
-M: mostrows@speakeasy.net
+M: mostrows@earthlink.net
S: Maintained
PPP OVER L2TP
W: http://www.isely.net/pvrusb2/
S: Maintained
-PXA2xx SUPPORT
-P: Nicolas Pitre
-M: nico@cam.org
+PXA2xx/PXA3xx SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+P: Russell King
+M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
L: netdev@vger.kernel.org
S: Maintained
-SIS 5513 IDE CONTROLLER DRIVER
-P: Lionel Bouton
-M: Lionel.Bouton@inet6.fr
-W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
-W: http://gyver.homeip.net/sis5513/index.html
-S: Maintained
-
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
P: Grant Grundler
M: grundler@parisc-linux.org
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
L: netdev@vger.kernel.org
S: Maintained
S: Maintained
W83791D HARDWARE MONITORING DRIVER
-P: Charles Spirakis
-M: bezaur@gmail.com
+P: Marc Hulsman
+M: m.hulsman@tudelft.nl
L: lm-sensors@lm-sensors.org
-S: Odd Fixes
+S: Maintained
W83793 HARDWARE MONITORING DRIVER
P: Rudolf Marek
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc5
-NAME = Funky Weasel is Jiggy wit it
+EXTRAVERSION = -rc8
+NAME = Rotary Wombat
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
LDFLAGS_vmlinux := -static -N #-relax
CHECKFLAGS += -D__alpha__ -m64
cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y += $(call cc-option, -fno-jump-tables)
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
# define DBG(args)
#endif
+DEFINE_SPINLOCK(t2_hae_lock);
+
static volatile unsigned int t2_mcheck_any_expected;
static volatile unsigned int t2_mcheck_last_taken;
static void __init
quirk_cypress(struct pci_dev *dev)
{
+ /* The Notorious Cy82C693 chip. */
+
+ /* The generic legacy mode IDE fixup in drivers/pci/probe.c
+ doesn't work correctly with the Cypress IDE controller as
+ it has non-standard register layout. Fix that. */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+ dev->resource[2].start = dev->resource[3].start = 0;
+ dev->resource[2].end = dev->resource[3].end = 0;
+ dev->resource[2].flags = dev->resource[3].flags = 0;
+ if (PCI_FUNC(dev->devfn) == 2) {
+ dev->resource[0].start = 0x170;
+ dev->resource[0].end = 0x177;
+ dev->resource[1].start = 0x376;
+ dev->resource[1].end = 0x376;
+ }
+ }
+
/* The Cypress bridge responds on the PCI bus in the address range
0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
way to turn this off. The bridge also supports several extended
/* Macro for exception fixup code to access integer registers. */
-#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r) (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
asmlinkage void
{
long error, tmp1, tmp2, tmp3, tmp4;
unsigned long pc = regs->pc - 4;
+ unsigned long *_regs = regs->regs;
const struct exception_table_entry *fixup;
unaligned[0].count++;
mutex_unlock(&ssp_lock);
- if (ssp->port_id != port)
+ if (&ssp->node == &ssp_list)
return NULL;
return ssp;
}
/* helper function */
-static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+static void __init
+__fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
{
if (cplb_data[i].psize) {
fill_cplbtab(t,
}
}
-static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+static void __init
+__fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
{
if (cplb_data[i].psize) {
fill_cplbtab(t,
};
static struct irq_desc bad_irq_desc = {
+ .status = IRQ_DISABLED,
.chip = &bad_chip,
.handle_irq = handle_bad_irq,
.depth = 1,
+ .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
+#ifdef CONFIG_SMP
+ .affinity = CPU_MASK_ALL
+#endif
};
int show_interrupts(struct seq_file *p, void *v)
CSYNC();
}
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
- if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
+ if (saved_dcplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "NULL pointer access\n");
else
#endif
info.si_code = ILL_CPLB_MULHIT;
sig = SIGSEGV;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
- if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
+ if (saved_icplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "Jump to NULL address\n");
else
#endif
oops_in_progress = 1;
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
};
#endif
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bf54x_spi_board_info,
- ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
};
#endif
-#ifdef CONFIG_SPI_BFIN
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.bits_per_word = 8,
};
#endif
-#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/
+core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/
core-$(CONFIG_KVM) += arch/ia64/kvm/
drivers-$(CONFIG_PCI) += arch/ia64/pci/
printk(KERN_ERR
"ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
len, slit->header.length);
- memset(numa_slit, 10, sizeof(numa_slit));
return;
}
slit_table = slit;
printk(KERN_INFO "Number of memory chunks in system = %d\n",
num_node_memblks);
- if (!slit_table)
+ if (!slit_table) {
+ for (i = 0; i < MAX_NUMNODES; i++)
+ for (j = 0; j < MAX_NUMNODES; j++)
+ node_distance(i, j) = i == j ? LOCAL_DISTANCE :
+ REMOTE_DISTANCE;
return;
+ }
+
memset(numa_slit, -1, sizeof(numa_slit));
for (i = 0; i < slit_table->locality_count; i++) {
if (!pxm_bit_test(i))
if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) {
rte = alloc_bootmem(sizeof(struct iosapic_rte_info) *
NR_PREALLOCATE_RTE_ENTRIES);
- if (!rte)
- return NULL;
for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++)
list_add(&rte->rte_list, &free_rte_list);
}
* invoked after, it will find an empty queue and no
* signal will be sent. In both case, we are safe
*/
- if (filp->f_flags & FASYNC) {
- DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
- pfm_do_fasync (-1, filp, ctx, 0);
- }
-
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
return -EBADF;
}
+ if (filp->f_flags & FASYNC) {
+ DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
+ pfm_do_fasync(-1, filp, ctx, 0);
+ }
+
PROTECT_CTX(ctx, flags);
state = ctx->ctx_state;
local_irq_save(flags);
/*
- * Schedule a timer interrupt, wait until it's reported, and see if
- * SAL_CACHE_FLUSH drops it.
+ * Send ourselves a timer interrupt, wait until it's reported, and see
+ * if SAL_CACHE_FLUSH drops it.
*/
- ia64_set_itv(IA64_TIMER_VECTOR);
- ia64_set_itm(ia64_get_itc() + 1000);
+ platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
while (!ia64_get_irr(IA64_TIMER_VECTOR))
cpu_relax();
cpu_init(); /* initialize the bootstrap CPU */
mmu_context_init(); /* initialize context_id bitmap */
- check_sal_cache_flush();
-
#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
ia64_mca_init();
platform_setup(cmdline_p);
+ check_sal_cache_flush();
paging_init();
}
if (p->u.ioreq.state == STATE_IORESP_READY) {
if (dir == IOREQ_READ)
- *dest = p->u.ioreq.data;
+ /* it's necessary to ensure zero extending */
+ *dest = p->u.ioreq.data & (~0UL >> (64-(s*8)));
} else
panic_vm(vcpu);
out:
int cpu;
char optstr[64];
+ if (count == 0 || count > sizeof(optstr))
+ return -EINVAL;
if (copy_from_user(optstr, user, count))
return -EFAULT;
optstr[count - 1] = '\0';
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+#ifdef CONFIG_IA64_SGI_UV
+int sn_prom_type;
+#endif
struct redir_addr {
unsigned long redirect;
m_n_config.s.m_skt = 37;
m_n_config.s.n_skt = 0;
mmr_base = 0;
+#if 0
+ /* Need BIOS calls - TDB */
+ if (!ia64_sn_is_fake_prom())
+ sn_prom_type = 1;
+ else
+#endif
+ sn_prom_type = 2;
+ printk(KERN_INFO "Running on medusa with %s PROM\n",
+ (sn_prom_type == 1) ? "real" : "fake");
} else {
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
mcftmr_cycles_per_jiffy = FREQ / HZ;
- __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
+ /*
+ * The coldfire timer runs from 0 to TRR included, then 0
+ * again and so on. It counts thus actually TRR + 1 steps
+ * for 1 tick, not TRR. So if you want n cycles,
+ * initialize TRR with n - 1.
+ */
+ __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
# Sibyte SWARM board
# Sibyte BCM91x80 (BigSur) board
#
-libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM) += 0xffffffff80030000
+endif
all-$(CONFIG_SNI_RM) := vmlinux.ecoff
#
static struct resource au1xxx_mmc_resources[] = {
[0] = {
.start = SD0_PHYS_ADDR,
- .end = SD0_PHYS_ADDR + 0x40,
+ .end = SD0_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SD1_PHYS_ADDR,
- .end = SD1_PHYS_ADDR + 0x40,
+ .end = SD1_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[2] = {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:40 2007
+# Linux kernel version: 2.6.25
+# Sat May 3 00:38:11 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-CONFIG_SIBYTE_SWARM=y
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+CONFIG_SIBYTE_SWARM=y
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_SIBYTE_SB1250=y
CONFIG_SIBYTE_SB1xxx_SOC=y
-CONFIG_CPU_SB1_PASS_1=y
+# CONFIG_CPU_SB1_PASS_1 is not set
# CONFIG_CPU_SB1_PASS_2_1250 is not set
-# CONFIG_CPU_SB1_PASS_2_2 is not set
+CONFIG_CPU_SB1_PASS_2_2=y
# CONFIG_CPU_SB1_PASS_4 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_LDT=y
+CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y
# CONFIG_SIMULATION is not set
# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
# CONFIG_SB1_CERR_STALL is not set
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_SB1250=y
+CONFIG_CSRC_SB1250=y
+CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SB1_PASS_1_WORKAROUNDS=y
+CONFIG_SB1_PASS_2_WORKAROUNDS=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_PROC_PID_CPUSET is not set
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_ZONE_DMA32=y
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_RFKILL=m
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=9220
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_SWARM=y
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
#
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
+# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Character devices
#
# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Sound
#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# USB Gadget Support
+# Miscellaneous USB options
#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
#
-# MMC/SD Card support
+# USB Host Controller Drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
-# LED devices
+# USB Device Class drivers
#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
-# LED drivers
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
-# LED Triggers
+# may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# InfiniBand support
+# USB Imaging devices
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB port drivers
#
+# CONFIG_USB_SERIAL is not set
#
-# Real Time Clock
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_SB1XXX_CORELIS is not set
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Wed Aug 8 16:11:47 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:54:51 2008
#
CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_GPIO_TB0219=y
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 11:16:55 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:53:54 2008
#
CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_VR41XX=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Thu Aug 9 14:03:54 2007
+# Linux kernel version: 2.6.26-rc1
+# Mon May 12 11:55:55 2008
#
CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_GPIO_TB0219 is not set
-# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
+# CONFIG_FB_COBALT is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
.liname = "SNI RM200_PCI",
.type = MACH_SNI_RM200_PCI,
.flags = PROM_FLAG_DONT_FREE_TEMP,
+ }, {
+ .arcname = "RM200PCI-R5K",
+ .liname = "SNI RM200_PCI-R5K",
+ .type = MACH_SNI_RM200_PCI,
+ .flags = PROM_FLAG_DONT_FREE_TEMP,
}
};
{
return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
}
+EXPORT_SYMBOL(smp_call_function);
void smp_call_function_interrupt(void)
{
put_cpu();
return 0;
}
+EXPORT_SYMBOL(smp_call_function_single);
static void stop_this_cpu(void *dummy)
{
void disable_lasat_irq(unsigned int irq_nr)
{
+ irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
}
void enable_lasat_irq(unsigned int irq_nr)
{
+ irq_nr -= LASAT_IRQ_BASE;
*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
}
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ctype.h>
+#include <linux/mutex.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include "at93c.h"
/* New model description table */
#include "lasat_models.h"
+static DEFINE_MUTEX(lasat_eeprom_mutex);
+
#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
struct lasat_info lasat_board_info;
-void update_bcastaddr(void);
-
int EEPROMRead(unsigned int pos, unsigned char *data, int len)
{
int i;
sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
}
-#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
- update_bcastaddr();
-#endif
-
return 0;
}
{
unsigned long crc;
+ mutex_lock(&lasat_eeprom_mutex);
+
/* Generate the CRC */
crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
sizeof(struct lasat_eeprom_struct) - 4);
/* Write the EEPROM info */
EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
sizeof(struct lasat_eeprom_struct));
+
+ mutex_unlock(&lasat_eeprom_mutex);
}
#include <linux/string.h>
#include <linux/net.h>
#include <linux/inet.h>
-#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <asm/time.h>
-#include "sysctl.h"
+#ifdef CONFIG_DS1603
#include "ds1603.h"
-
-static DEFINE_MUTEX(lasat_info_mutex);
+#endif
/* Strategy function to write EEPROM after changing string entry */
int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_string(table, name,
nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
+
if (newval && newlen)
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return 0;
}
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dostring(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if ((!write) || r)
return r;
- }
+
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if ((!write) || r)
return r;
- }
+
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
+#ifdef CONFIG_DS1603
static int rtctmp;
-#ifdef CONFIG_DS1603
/* proc function to read/write RealTime Clock */
int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- mutex_lock(&lasat_info_mutex);
if (!write) {
rtctmp = read_persistent_clock();
/* check for time < 0 and set to 0 */
rtctmp = 0;
}
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if (r)
return r;
- }
- rtc_mips_set_mmss(rtctmp);
- mutex_unlock(&lasat_info_mutex);
+
+ if (write)
+ rtc_mips_set_mmss(rtctmp);
return 0;
}
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
+
if (newval && newlen)
lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return 0;
}
#ifdef CONFIG_DS1603
{
int r;
- mutex_lock(&lasat_info_mutex);
rtctmp = read_persistent_clock();
if (rtctmp < 0)
rtctmp = 0;
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
if (newval && newlen)
rtc_mips_set_mmss(rtctmp);
- mutex_unlock(&lasat_info_mutex);
- return 1;
+ return r;
}
#endif
#ifdef CONFIG_INET
-static char lasat_bcastaddr[16];
-
-void update_bcastaddr(void)
-{
- unsigned int ip;
-
- ip = (lasat_board_info.li_eeprom_info.ipaddr &
- lasat_board_info.li_eeprom_info.netmask) |
- ~lasat_board_info.li_eeprom_info.netmask;
-
- sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
- (ip) & 0xff,
- (ip >> 8) & 0xff,
- (ip >> 16) & 0xff,
- (ip >> 24) & 0xff);
-}
-
-static char proc_lasat_ipbuf[32];
-
-/* Parsing of IP address */
int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int ip;
char *p, c;
int len;
+ char ipbuf[32];
if (!table->data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
return 0;
}
- mutex_lock(&lasat_info_mutex);
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
- if (get_user(c, p++)) {
- mutex_unlock(&lasat_info_mutex);
+ if (get_user(c, p++))
return -EFAULT;
- }
if (c == 0 || c == '\n')
break;
len++;
}
- if (len >= sizeof(proc_lasat_ipbuf)-1)
- len = sizeof(proc_lasat_ipbuf) - 1;
- if (copy_from_user(proc_lasat_ipbuf, buffer, len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (len >= sizeof(ipbuf)-1)
+ len = sizeof(ipbuf) - 1;
+ if (copy_from_user(ipbuf, buffer, len))
return -EFAULT;
- }
- proc_lasat_ipbuf[len] = 0;
+ ipbuf[len] = 0;
*ppos += *lenp;
/* Now see if we can convert it to a valid IP */
- ip = in_aton(proc_lasat_ipbuf);
+ ip = in_aton(ipbuf);
*(unsigned int *)(table->data) = ip;
lasat_write_eeprom_info();
} else {
ip = *(unsigned int *)(table->data);
- sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d",
+ sprintf(ipbuf, "%d.%d.%d.%d",
(ip) & 0xff,
(ip >> 8) & 0xff,
(ip >> 16) & 0xff,
(ip >> 24) & 0xff);
- len = strlen(proc_lasat_ipbuf);
+ len = strlen(ipbuf);
if (len > *lenp)
len = *lenp;
if (len)
- if (copy_to_user(buffer, proc_lasat_ipbuf, len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (copy_to_user(buffer, ipbuf, len))
return -EFAULT;
- }
if (len < *lenp) {
- if (put_user('\n', ((char *) buffer) + len)) {
- mutex_unlock(&lasat_info_mutex);
+ if (put_user('\n', ((char *) buffer) + len))
return -EFAULT;
- }
len++;
}
*lenp = len;
*ppos += len;
}
- update_bcastaddr();
- mutex_unlock(&lasat_info_mutex);
return 0;
}
-#endif /* defined(CONFIG_INET) */
+#endif
-static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
int r;
- mutex_lock(&lasat_info_mutex);
r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
- if (r < 0) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
- }
-
if (newval && newlen) {
- if (name && *name == LASAT_PRID)
- lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-
+ lasat_board_info.li_eeprom_info.prid = *(int *)newval;
lasat_write_eeprom_info();
lasat_init_board_info();
}
- mutex_unlock(&lasat_info_mutex);
-
return 0;
}
-int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- mutex_lock(&lasat_info_mutex);
r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
- if ((!write) || r) {
- mutex_unlock(&lasat_info_mutex);
+ if (r < 0)
return r;
+ if (write) {
+ lasat_board_info.li_eeprom_info.prid =
+ lasat_board_info.li_prid;
+ lasat_write_eeprom_info();
+ lasat_init_board_info();
}
- if (filp && filp->f_path.dentry) {
- if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
- lasat_board_info.li_eeprom_info.prid =
- lasat_board_info.li_prid;
- if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
- lasat_board_info.li_eeprom_info.debugaccess =
- lasat_board_info.li_debugaccess;
- }
- lasat_write_eeprom_info();
- mutex_unlock(&lasat_info_mutex);
-
return 0;
}
extern int lasat_boot_to_service;
-#ifdef CONFIG_SYSCTL
-
static ctl_table lasat_table[] = {
{
.ctl_name = CTL_UNNUMBERED,
.data = &lasat_board_info.li_prid,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_lasat_eeprom_value,
- .strategy = &sysctl_lasat_eeprom_value
+ .proc_handler = &proc_lasat_prid,
+ .strategy = &sysctl_lasat_prid
},
#ifdef CONFIG_INET
{
.strategy = &sysctl_lasat_intvec
},
{
- .ctl_name = LASAT_NETMASK,
+ .ctl_name = CTL_UNNUMBERED,
.procname = "netmask",
.data = &lasat_board_info.li_eeprom_info.netmask,
.maxlen = sizeof(int),
.proc_handler = &proc_lasat_ip,
.strategy = &sysctl_lasat_intvec
},
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "bcastaddr",
- .data = &lasat_bcastaddr,
- .maxlen = sizeof(lasat_bcastaddr),
- .mode = 0600,
- .proc_handler = &proc_dostring,
- .strategy = &sysctl_string
- },
#endif
{
.ctl_name = CTL_UNNUMBERED,
.data = &lasat_board_info.li_namestr,
.maxlen = sizeof(lasat_board_info.li_namestr),
.mode = 0444,
- .proc_handler = &proc_dostring,
+ .proc_handler = &proc_dostring,
.strategy = &sysctl_string
},
{
lasat_table_header =
register_sysctl_table(lasat_root_table);
+ if (!lasat_table_header) {
+ printk(KERN_ERR "Unable to register LASAT sysctl\n");
+ return -ENOMEM;
+ }
return 0;
}
__initcall(lasat_register_sysctl);
-#endif /* CONFIG_SYSCTL */
+++ /dev/null
-/*
- * LASAT sysctl values
- */
-
-#ifndef _LASAT_SYSCTL_H
-#define _LASAT_SYSCTL_H
-
-/* /proc/sys/lasat */
-enum {
- LASAT_CPU_HZ = 1,
- LASAT_BUS_HZ,
- LASAT_MODEL,
- LASAT_PRID,
- LASAT_IPADDR,
- LASAT_NETMASK,
- LASAT_BCAST,
- LASAT_PASSWORD,
- LASAT_SBOOT,
- LASAT_RTC,
- LASAT_NAMESTR,
- LASAT_TYPESTR,
-};
-
-#endif /* _LASAT_SYSCTL_H */
int amon_cpu_avail(int cpu)
{
- struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (cpu < 0 || cpu >= NCPULAUNCH) {
pr_debug("avail: cpu%d is out of range\n", cpu);
unsigned long gp, unsigned long a0)
{
volatile struct cpulaunch *launch =
- (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
if (!amon_cpu_avail(cpu))
return;
# under Linux.
#
-obj-y := malta_int.o malta_platform.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
-obj-$(CONFIG_MTD) += malta_mtd.o
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
struct page *page = pfn_to_page(fcp_args->pfn);
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
+ int map_coherent = 0;
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
* Use kmap_coherent or kmap_atomic to do flushes for
* another ASID than the current one.
*/
- if (cpu_has_dc_aliases)
+ map_coherent = (cpu_has_dc_aliases &&
+ page_mapped(page) && !Page_dcache_dirty(page));
+ if (map_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page, KM_USER0);
}
if (vaddr) {
- if (cpu_has_dc_aliases)
+ if (map_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr, KM_USER0);
}
}
+/* CP0 hazard avoidance. */
+#define NXP_BARRIER() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+static void nxp_pr4450_fixup_config(void)
+{
+ unsigned long config0;
+
+ config0 = read_c0_config();
+
+ /* clear all three cache coherency fields */
+ config0 &= ~(0x7 | (7 << 25) | (7 << 28));
+ config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) |
+ ((_page_cachable_default >> _CACHE_SHIFT) << 25) |
+ ((_page_cachable_default >> _CACHE_SHIFT) << 28));
+ write_c0_config(config0);
+ NXP_BARRIER();
+}
+
static int __cpuinitdata cca = -1;
static int __init cca_setup(char *str)
case CPU_AU1500: /* rev. AB */
au1x00_fixup_config_od();
break;
+
+ case PRID_IMP_PR4450:
+ nxp_pr4450_fixup_config();
+ break;
}
}
* don't have to care about aliases on other CPUs.
*/
unsigned long empty_zero_page, zero_page_mask;
+EXPORT_SYMBOL_GPL(empty_zero_page);
/*
* Not static inline because used by IP27 special magic initialization code
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
- off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) *
cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
void __init board_setup(void)
{
- unsigned long config0, configpr;
-
- config0 = read_c0_config();
-
- /* clear all three cache coherency fields */
- config0 &= ~(0x7 | (7<<25) | (7<<28));
- config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
- (CONF_CM_DEFAULT<<28));
- write_c0_config(config0);
- BARRIER;
+ unsigned long configpr;
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
void __init board_setup(void)
{
- unsigned long config0, configpr;
-
- config0 = read_c0_config();
-
- /* clear all three cache coherency fields */
- config0 &= ~(0x7 | (7<<25) | (7<<28));
- config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
- (CONF_CM_DEFAULT<<28));
- write_c0_config(config0);
+ unsigned long configpr;
configpr = read_c0_config7();
configpr |= (1<<19); /* enable tlb */
static int __init sb1250_pcibios_init(void)
{
+ void __iomem *io_map_base;
uint32_t cmdreg;
uint64_t reg;
extern int pci_probe_only;
* works correctly with most of Linux's drivers.
* XXX ehs: Should this happen in PCI Device mode?
*/
-
- set_io_port_base((unsigned long)
- ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536));
isa_slot_offset = (unsigned long)
ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
+ io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
+ sb1250_controller.io_map_base = io_map_base;
+ set_io_port_base((unsigned long)io_map_base);
+
#ifdef CONFIG_SIBYTE_HAS_LDT
/*
* Also check the LDT bridge's enable, just in case we didn't
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
* Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
ioport_resource.end = IO_PORT_RESOURCE_END;
}
+ if (setup->master_io) {
+ void __iomem *io_map_base;
+ struct resource *res = vr41xx_pci_controller.io_resource;
+ master = setup->master_io;
+ io_map_base = ioremap(master->bus_base_address,
+ res->end - res->start + 1);
+ if (!io_map_base)
+ return -EBUSY;
+
+ vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base;
+ }
+
register_pci_controller(&vr41xx_pci_controller);
return 0;
-lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
-lib-$(CONFIG_KGDB) += dbg_io.o
+obj-$(CONFIG_KGDB) += dbg_io.o
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <linux/linkage.h>
-#include <linux/init.h>
.level LEVEL
- __HEAD
+ .text
.import hpux_call_table
.import hpux_syscall_exit,code
#include <asm/assembly.h>
#include <asm/signal.h>
#include <linux/linkage.h>
-#include <linux/init.h>
.level LEVEL
- __HEAD
+ .text
/* These should probably go in a header file somewhere.
* They are duplicated in kernel/wrappers.S
#include <asm/thread_info.h>
#include <linux/linkage.h>
-#include <linux/init.h>
#ifdef CONFIG_64BIT
.level 2.0w
* the static part of the kernel address space.
*/
- __HEAD
+ .text
.align PAGE_SIZE
END(boot_args)
__HEAD
+
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
#include <asm/pdc.h>
#include <linux/linkage.h>
-#include <linux/init.h>
/*
* stack for os_hpmc, the HPMC handler.
.block HPMC_PIM_DATA_SIZE
END(hpmc_pim_data)
- __HEAD
+ .text
.import intr_save, code
ENTRY(os_hpmc)
#include <asm/pgtable.h>
#include <asm/cache.h>
#include <linux/linkage.h>
-#include <linux/init.h>
- __HEAD
+ .text
.align 128
ENTRY(flush_tlb_all_local)
EXPORT_SYMBOL(node_data);
EXPORT_SYMBOL(pfnnid_map);
#endif
+
+/* from pacache.S -- needed for copy_page */
+EXPORT_SYMBOL(copy_user_page_asm);
; The coprocessor only needs to be enabled when
; starting/stopping the coprocessor with the pmenb/pmdis.
;
- __HEAD
+ .text
ENTRY(perf_intrigue_enable_perf_counters)
.proc
#include <asm/assembly.h>
#include <linux/linkage.h>
-#include <linux/init.h>
.section .bss
.export real_stack
/************************ 32-bit real-mode calls ***********************/
/* This can be called in both narrow and wide kernels */
- __HEAD
+ .text
/* unsigned long real32_call_asm(unsigned int *sp,
* unsigned int *arg0p,
# define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where)
# define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r
- __HEAD
+ .text
save_control_regs:
load32 PA(save_cr_space), %r28
PUSH_CR(%cr24, %r28)
/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
* more general-purpose use by the several places which need RFIs
*/
- __HEAD
+ .text
.align 128
rfi_virt2real:
/* switch to real mode... */
bv 0(%r2)
nop
- __HEAD
+ .text
.align 128
rfi_real2virt:
rsm PSW_SM_I,%r0
/************************ 64-bit real-mode calls ***********************/
/* This is only usable in wide kernels right now and will probably stay so */
- __HEAD
+ .text
/* unsigned long real64_call_asm(unsigned long *sp,
* unsigned long *arg0p,
* unsigned long fn)
#endif
- __HEAD
+ .text
/* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html
** GCC 3.3 and later has a new function in libgcc.a for
** comparing function pointers.
&sc->sc_iaoq[0], compat_reg);
/* Store upper half */
- compat_reg = (compat_uint_t)(regs->gr[32] >> 32);
+ compat_reg = (compat_uint_t)(regs->gr[31] >> 32);
err |= __put_user(compat_reg, &rf->rf_iaoq[0]);
DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg);
DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n",
&sc->sc_iaoq[1], compat_reg);
/* Store upper half */
- compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32);
+ compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32);
err |= __put_user(compat_reg, &rf->rf_iaoq[1]);
DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg);
#include <asm/processor.h>
#include <linux/linkage.h>
-#include <linux/init.h>
/* We fill the empty parts of the gateway page with
* something that will kill the kernel or a
.level LEVEL
- __HEAD
+ .text
.import syscall_exit,code
.import syscall_exit_rfi,code
All light-weight-syscall atomic operations
will use this set of locks
*/
- .section .data, "aw"
+ .section .data
.align PAGE_SIZE
ENTRY(lws_lock_start)
/* lws locks */
_text = .; /* Text and read-only data */
.text ALIGN(16) : {
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#include <asm/assembly.h>
#include <asm/errno.h>
#include <linux/linkage.h>
-#include <linux/init.h>
#ifdef CONFIG_SMP
.macro get_fault_ip t1 t2
.level LEVEL
- __HEAD
+ .text
.section .fixup, "ax"
/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
*/
+ .text
+
#include <asm/assembly.h>
#include <asm/errno.h>
#include <linux/linkage.h>
-#include <linux/init.h>
-
- __HEAD
/*
* get_sr gets the appropriate space value into
}
unsigned long *empty_zero_page __read_mostly;
+EXPORT_SYMBOL(empty_zero_page);
void show_mem(void)
{
else
KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
endif
+else
+LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
ifeq ($(CONFIG_TUNE_CELL),y)
CPPFLAGS_vmlinux.lds := -Upowerpc
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
PHONY += $(BOOT_TARGETS)
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-src-wlib := string.S crt0.S stdio.c main.c \
+src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
--- /dev/null
+/*
+ * Special support for eabi and SVR4
+ *
+ * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file. (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ * As a special exception, if you link this library with files
+ * compiled with GCC to produce an executable, this does not cause
+ * the resulting executable to be covered by the GNU General Public License.
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ */
+
+ .file "crtsavres.S"
+ .section ".text"
+
+/* On PowerPC64 Linux, these functions are provided by the linker. */
+#ifndef __powerpc64__
+
+#define _GLOBAL(name) \
+ .type name,@function; \
+ .globl name; \
+name:
+
+/* Routines for saving integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area. */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+ stw 14,-72(11) /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+ stw 15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+ stw 16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+ stw 17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+ stw 18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+ stw 19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+ stw 20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+ stw 21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+ stw 22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+ stw 23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+ stw 24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+ stw 25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+ stw 26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+ stw 27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+ stw 28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+ stw 29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+ stw 30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+ stw 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+ lwz 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+ lwz 0,4(11)
+ lwz 31,-4(11)
+ mtlr 0
+ mr 1,11
+ blr
+#endif
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
reg = <0x2>;
device_type = "ethernet-phy";
};
- phy3: ethernet-phy@3 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
};
enet0: ethernet@24000 {
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
- phy-handle = <&phy3>;
+ fixed-link = <1 1 1000 0 0>;
};
serial0: serial@4500 {
interrupts = <26 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
0x1000000 0x0 0x0
0x1000000 0x0 0x0
- 0x0 0x8000000>;
+ 0x0 0x100000>;
};
};
};
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Fri Apr 11 11:10:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:21 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:21 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_FSL=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:51 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:22 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:24 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:17 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:25 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:18 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:26 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:56 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:26 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:36:57 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:27 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:23 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:28 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:24 2008
+# Linux kernel version: 2.6.26-rc5
+# Tue Jun 10 09:17:12 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_83xx_WDT=y
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
#
# Sonics Silicon Backplane
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:38 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:30 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Mon Feb 11 16:25:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:30 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# Platform support
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
CONFIG_ISA_DMA_API=y
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:31 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:03 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:32 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_FSL_DMA=y
-# CONFIG_FSL_DMA_SELFTEST is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:27 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:33 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:05 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:34 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC85xx_MDS=y
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:06 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:35 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:30 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:36 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:37 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:38 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:42 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:38 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:43 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:39 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
# CONFIG_TQM8541 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
#
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:40 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_TQM8541=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:44 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:41 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:45 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:42 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Wed Feb 20 12:26:07 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:08 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# Platform support
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:09 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:09 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:09 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:18 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:08:31 2008
#
CONFIG_PPC64=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_ATA_SFF is not set
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:10 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:10 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:11 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:13 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:12 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 18:07:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:14 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:08 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 09:03:46 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MPC85xx_CDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC85xx_DS=y
+CONFIG_KSI8560=y
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# on-CPU RTC drivers
#
-# CONFIG_DMADEVICES is not set
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
#
-# Userspace I/O
+# DMA Devices
#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:33 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:50:24 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8610=y
# CONFIG_IPIC is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
#
# Sound
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
#
CONFIG_SND_SOC=y
-#
-# SoC Audio support for SuperH
-#
-
#
# ALSA SoC audio for Freescale SOCs
#
CONFIG_SND_SOC_MPC8610=y
CONFIG_SND_SOC_MPC8610_HPCD=y
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:11 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:15 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC8641_HPCN=y
+# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
CONFIG_MPC8641=y
# CONFIG_IPIC is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
-# CONFIG_DVB_CORE_ATTACH is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
#
# DVB-S (satellite) frontends
#
-# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
#
-# Tuners/PLL support
+# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TDA827X is not set
-# CONFIG_DVB_TDA18271 is not set
-# CONFIG_DVB_TUNER_QT1010 is not set
-# CONFIG_DVB_TUNER_MT2060 is not set
-# CONFIG_DVB_TUNER_MT2266 is not set
-# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_XC5000 is not set
#
-# Miscellaneous devices
+# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_TUA6100 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:16 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:35 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:17 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
#
# Library routines
#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:02 2008
+# Linux kernel version: 2.6.26-rc6
+# Mon Jun 16 21:11:19 2008
#
CONFIG_PPC64=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
-# CONFIG_ATA_SFF is not set
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCC is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PPC=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:36 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:18 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00400000
#
# Networking
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_BDI_SWITCH=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:18 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_MV64XXX=y
#
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Apr 10 18:03:25 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:19 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 11:37:19 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun 9 08:52:20 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
#
# I2C Hardware Bus support
#
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_ASYNC_XOR=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
rlwimi r11,r13,0,26,31 /* Insert static perms */
- rlwinm r11,r11,0,20,15 /* Clear U0-U3 */
+ /*
+ * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
+ * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
+ * include/asm-powerpc/pgtable-ppc32.h for details).
+ */
+ rlwinm r11,r11,0,20,10
/* find the TLB index that caused the fault. It has to be here. */
tlbsx r10, 0, r10
static int __init irq_debugfs_init(void)
{
if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
- NULL, &virq_debug_fops))
+ NULL, &virq_debug_fops) == NULL)
return -ENOMEM;
return 0;
#include <linux/screen_info.h>
#include <linux/vt_kern.h>
#include <linux/nvram.h>
-#include <linux/console.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
EXPORT_SYMBOL(cacheable_memcpy);
#endif
fi
done
+ # ignore register save/restore funcitons
+ if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+ OK=1
+ fi
+ if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+ OK=1
+ fi
+
if [ $OK -eq 0 ]; then
ERROR=1
echo "Error: External symbol '$UNDEF' referenced" \
printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT),
page_count(pg),
pg->flags);
- if (upg/* && pg != upg*/) {
+ if (upg && !IS_ERR(upg) /* && pg != upg*/) {
printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg)
<< PAGE_SHIFT),
page_count(upg),
struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index];
struct page *page = vcpu->arch.shadow_pages[index];
- kunmap(vcpu->arch.shadow_pages[index]);
-
if (get_tlb_v(stlbe)) {
if (kvmppc_44x_tlbe_is_writable(stlbe))
kvm_release_page_dirty(page);
stlbe = &vcpu->arch.shadow_tlb[victim];
/* Get reference to new page. */
- down_write(¤t->mm->mmap_sem);
+ down_read(¤t->mm->mmap_sem);
new_page = gfn_to_page(vcpu->kvm, gfn);
if (is_error_page(new_page)) {
- printk(KERN_ERR "Couldn't get guest page!\n");
+ printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
kvm_release_page_clean(new_page);
+ up_read(¤t->mm->mmap_sem);
return;
}
hpaddr = page_to_phys(new_page);
/* Drop reference to old page. */
kvmppc_44x_shadow_release(vcpu, victim);
- up_write(¤t->mm->mmap_sem);
+ up_read(¤t->mm->mmap_sem);
vcpu->arch.shadow_pages[victim] = new_page;
}
}
-static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
-{
- enum emulation_result er;
- int r;
-
- er = kvmppc_emulate_instruction(run, vcpu);
- switch (er) {
- case EMULATE_DONE:
- /* Future optimization: only reload non-volatiles if they were
- * actually modified. */
- r = RESUME_GUEST_NV;
- break;
- case EMULATE_DO_MMIO:
- run->exit_reason = KVM_EXIT_MMIO;
- /* We must reload nonvolatiles because "update" load/store
- * instructions modify register state. */
- /* Future optimization: only reload non-volatiles if they were
- * actually modified. */
- r = RESUME_HOST_NV;
- break;
- case EMULATE_FAIL:
- /* XXX Deliver Program interrupt to guest. */
- printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__,
- vcpu->arch.last_inst);
- r = RESUME_HOST;
- break;
- default:
- BUG();
- }
-
- return r;
-}
-
/**
* kvmppc_handle_exit
*
case 31:
switch (get_xop(inst)) {
+ case 23: /* lwzx */
+ rt = get_rt(inst);
+ emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
+ break;
+
case 83: /* mfmsr */
rt = get_rt(inst);
vcpu->arch.gpr[rt] = vcpu->arch.msr;
kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
break;
+ case 151: /* stwx */
+ rs = get_rs(inst);
+ emulated = kvmppc_handle_store(run, vcpu,
+ vcpu->arch.gpr[rs],
+ 4, 1);
+ break;
+
case 163: /* wrteei */
vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
| (inst & MSR_EE);
ifeq ($(CONFIG_PPC_MERGE),y)
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
--- /dev/null
+/*
+ * Special support for eabi and SVR4
+ *
+ * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file. (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ * As a special exception, if you link this library with files
+ * compiled with GCC to produce an executable, this does not cause
+ * the resulting executable to be covered by the GNU General Public License.
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ */
+
+#include <asm/ppc_asm.h>
+
+ .file "crtsavres.S"
+ .section ".text"
+
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+
+/* Routines for saving integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area. */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+ stw 14,-72(11) /* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+ stw 15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+ stw 16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+ stw 17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+ stw 18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+ stw 19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+ stw 20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+ stw 21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+ stw 22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+ stw 23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+ stw 24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+ stw 25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+ stw 26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+ stw 27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+ stw 28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+ stw 29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+ stw 30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+ stw 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+ lwz 31,-4(11)
+ blr
+
+/* Routines for restoring integer registers, called by the compiler. */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area. */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+ lwz 14,-72(11) /* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+ lwz 15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+ lwz 16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+ lwz 17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+ lwz 18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+ lwz 19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+ lwz 20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+ lwz 21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+ lwz 22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+ lwz 23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+ lwz 24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+ lwz 25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+ lwz 26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+ lwz 27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+ lwz 28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+ lwz 29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+ lwz 30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+ lwz 0,4(11)
+ lwz 31,-4(11)
+ mtlr 0
+ mr 1,11
+ blr
+#endif
ld r7,STK_PARM(r9)(r1) /* ssize */
ld r8,STK_PARM(r8)(r1) /* local */
bl .flush_hash_page
+ /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
+ lis r0,_PAGE_HPTE_SUB@h
+ ori r0,r0,_PAGE_HPTE_SUB@l
+ andc r30,r30,r0
b htab_insert_pte
htab_bail_ok:
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
+ select PHYLIB
help
This option enables support for the MPC85xx MDS board
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
+ int ret;
+
pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
- /* Handle kernel space hash faults immediately.
- User hash faults need to be deferred to process context. */
- if ((dsisr & MFC_DSISR_PTE_NOT_FOUND)
- && REGION_ID(ea) != USER_REGION_ID
- && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) {
- spu_restart_dma(spu);
- return 0;
+ /*
+ * Handle kernel space hash faults immediately. User hash
+ * faults need to be deferred to process context.
+ */
+ if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) &&
+ (REGION_ID(ea) != USER_REGION_ID)) {
+
+ spin_unlock(&spu->register_lock);
+ ret = hash_page(ea, _PAGE_PRESENT, 0x300);
+ spin_lock(&spu->register_lock);
+
+ if (!ret) {
+ spu_restart_dma(spu);
+ return 0;
+ }
}
spu->class_1_dar = ea;
stat = spu_int_stat_get(spu, 0) & mask;
spu->class_0_pending |= stat;
- spu->class_0_dsisr = spu_mfc_dsisr_get(spu);
spu->class_0_dar = spu_mfc_dar_get(spu);
- spin_unlock(&spu->register_lock);
-
spu->stop_callback(spu, 0);
-
spu->class_0_pending = 0;
- spu->class_0_dsisr = 0;
spu->class_0_dar = 0;
spu_int_stat_clear(spu, 0, stat);
+ spin_unlock(&spu->register_lock);
return IRQ_HANDLED;
}
spu_mfc_dsisr_set(spu, 0ul);
spu_int_stat_clear(spu, 1, stat);
- if (stat & CLASS1_SEGMENT_FAULT_INTR)
- __spu_trap_data_seg(spu, dar);
-
- spin_unlock(&spu->register_lock);
pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
dar, dsisr);
+ if (stat & CLASS1_SEGMENT_FAULT_INTR)
+ __spu_trap_data_seg(spu, dar);
+
if (stat & CLASS1_STORAGE_FAULT_INTR)
__spu_trap_data_map(spu, dar, dsisr);
spu->class_1_dsisr = 0;
spu->class_1_dar = 0;
+ spin_unlock(&spu->register_lock);
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
mask = spu_int_mask_get(spu, 2);
/* ignore interrupts we're not waiting for */
stat &= mask;
-
/* mailbox interrupts are level triggered. mask them now before
* acknowledging */
if (stat & mailbox_intrs)
spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs));
/* acknowledge all interrupts before the callbacks */
spu_int_stat_clear(spu, 2, stat);
- spin_unlock(&spu->register_lock);
pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask);
spu->wbox_callback(spu);
spu->stats.class2_intr++;
+
+ spin_unlock(&spu->register_lock);
+
return stat ? IRQ_HANDLED : IRQ_NONE;
}
switch(irq) {
case 0 :
ctx->csa.class_0_pending = spu->class_0_pending;
- ctx->csa.class_0_dsisr = spu->class_0_dsisr;
ctx->csa.class_0_dar = spu->class_0_dar;
break;
case 1 :
u64 dsisr;
u32 stopped;
- *stat = ctx->ops->status_read(ctx);
-
- if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
- return 1;
-
stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
- if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped))
+
+top:
+ *stat = ctx->ops->status_read(ctx);
+ if (*stat & stopped) {
+ /*
+ * If the spu hasn't finished stopping, we need to
+ * re-read the register to get the stopped value.
+ */
+ if (*stat & SPU_STATUS_RUNNING)
+ goto top;
return 1;
+ }
- dsisr = ctx->csa.class_0_dsisr;
- if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
+ if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
return 1;
dsisr = ctx->csa.class_1_dsisr;
ctx->stats.slb_flt_base = spu->stats.slb_flt;
ctx->stats.class2_intr_base = spu->stats.class2_intr;
+ spu_associate_mm(spu, ctx->owner);
+
+ spin_lock_irq(&spu->register_lock);
spu->ctx = ctx;
spu->flags = 0;
ctx->spu = spu;
ctx->ops = &spu_hw_ops;
spu->pid = current->pid;
spu->tgid = current->tgid;
- spu_associate_mm(spu, ctx->owner);
spu->ibox_callback = spufs_ibox_callback;
spu->wbox_callback = spufs_wbox_callback;
spu->stop_callback = spufs_stop_callback;
spu->mfc_callback = spufs_mfc_callback;
- mb();
+ spin_unlock_irq(&spu->register_lock);
+
spu_unmap_mappings(ctx);
+
spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
spu_restore(&ctx->csa, spu);
spu->timestamp = jiffies;
*/
static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
{
+ u32 status;
+
spu_context_trace(spu_unbind_context__enter, ctx, spu);
spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
spu_unmap_mappings(ctx);
spu_save(&ctx->csa, spu);
spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
+
+ spin_lock_irq(&spu->register_lock);
spu->timestamp = jiffies;
ctx->state = SPU_STATE_SAVED;
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
spu->mfc_callback = NULL;
- spu_associate_mm(spu, NULL);
spu->pid = 0;
spu->tgid = 0;
ctx->ops = &spu_backing_ops;
spu->flags = 0;
spu->ctx = NULL;
+ spin_unlock_irq(&spu->register_lock);
+
+ spu_associate_mm(spu, NULL);
ctx->stats.slb_flt +=
(spu->stats.slb_flt - ctx->stats.slb_flt_base);
/* This maps the underlying spu state to idle */
spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
ctx->spu = NULL;
+
+ if (spu_stopped(ctx, &status))
+ wake_up_all(&ctx->stop_wq);
}
/**
}
#ifdef DEBUG
-static void print_device_node_tree (struct pci_dn *pdn, int dent)
+static void print_device_node_tree(struct pci_dn *pdn, int dent)
{
int i;
- if (!pdn) return;
- for (i=0;i<dent; i++)
+ struct device_node *pc;
+
+ if (!pdn)
+ return;
+ for (i = 0; i < dent; i++)
printk(" ");
printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
pdn->eeh_pe_config_addr, pdn->node->full_name);
dent += 3;
- struct device_node *pc = pdn->node->child;
+ pc = pdn->node->child;
while (pc) {
print_device_node_tree(PCI_DN(pc), dent);
pc = pc->sibling;
return -ENODEV;
nbytes_p = of_get_property(nvram, "#bytes", &proplen);
- if (nbytes_p == NULL || proplen != sizeof(unsigned int))
+ if (nbytes_p == NULL || proplen != sizeof(unsigned int)) {
+ of_node_put(nvram);
return -EIO;
+ }
nvram_size = *nbytes_p;
DUMP_FIELD(spu, "0x%lx", flags);
DUMP_FIELD(spu, "%d", class_0_pending);
DUMP_FIELD(spu, "0x%lx", class_0_dar);
- DUMP_FIELD(spu, "0x%lx", class_0_dsisr);
DUMP_FIELD(spu, "0x%lx", class_1_dar);
DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
DUMP_FIELD(spu, "0x%lx", irqs[0]);
def_bool y
select SPARSEMEM_VMEMMAP_ENABLE
select SPARSEMEM_VMEMMAP
+ select SPARSEMEM_STATIC if !64BIT
config ARCH_SPARSEMEM_DEFAULT
def_bool y
memset(sf, 0, sizeof(struct stack_frame));
sf->gprs[9] = (unsigned long) sf;
cpu_lowcore->save_area[15] = (unsigned long) sf;
- __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15);
+ __ctl_store(cpu_lowcore->cregs_save_area, 0, 15);
asm volatile(
" stam 0,15,0(%0)"
: : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
VCPU_EVENT(vcpu, 5, "%s", "diag time slice end");
vcpu->stat.diagnose_44++;
vcpu_put(vcpu);
- schedule();
+ yield();
vcpu_load(vcpu);
return 0;
}
if (kvm_cpu_has_interrupt(vcpu))
return 0;
+ __set_cpu_idle(vcpu);
+ spin_lock_bh(&vcpu->arch.local_int.lock);
+ vcpu->arch.local_int.timer_due = 0;
+ spin_unlock_bh(&vcpu->arch.local_int.lock);
+
if (psw_interrupts_disabled(vcpu)) {
VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
__unset_cpu_idle(vcpu);
no_timer:
spin_lock_bh(&vcpu->arch.local_int.float_int->lock);
spin_lock_bh(&vcpu->arch.local_int.lock);
- __set_cpu_idle(vcpu);
- vcpu->arch.local_int.timer_due = 0;
add_wait_queue(&vcpu->arch.local_int.wq, &wait);
while (list_empty(&vcpu->arch.local_int.list) &&
list_empty(&vcpu->arch.local_int.float_int->list) &&
return -EINVAL; /* not implemented yet */
}
+extern void s390_handle_mcck(void);
+
static void __vcpu_run(struct kvm_vcpu *vcpu)
{
memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16);
if (need_resched())
schedule();
+ if (test_thread_flag(TIF_MCCK_PENDING))
+ s390_handle_mcck();
+
+ kvm_s390_deliver_pending_interrupts(vcpu);
+
vcpu->arch.sie_block->icptcode = 0;
local_irq_disable();
kvm_guest_enter();
local_irq_enable();
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
- sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs);
+ if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
+ VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
+ kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+ }
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
local_irq_disable();
might_sleep();
do {
- kvm_s390_deliver_pending_interrupts(vcpu);
__vcpu_run(vcpu);
rc = kvm_handle_sie_intercept(vcpu);
} while (!signal_pending(current) && !rc);
int s390_enable_sie(void)
{
struct task_struct *tsk = current;
- struct mm_struct *mm;
- int rc;
+ struct mm_struct *mm, *old_mm;
- task_lock(tsk);
-
- rc = 0;
+ /* Do we have pgstes? if yes, we are done */
if (tsk->mm->context.pgstes)
- goto unlock;
+ return 0;
- rc = -EINVAL;
+ /* lets check if we are allowed to replace the mm */
+ task_lock(tsk);
if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
- tsk->mm != tsk->active_mm || tsk->mm->ioctx_list)
- goto unlock;
+ tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+ task_unlock(tsk);
+ return -EINVAL;
+ }
+ task_unlock(tsk);
- tsk->mm->context.pgstes = 1; /* dirty little tricks .. */
+ /* we copy the mm with pgstes enabled */
+ tsk->mm->context.pgstes = 1;
mm = dup_mm(tsk);
tsk->mm->context.pgstes = 0;
-
- rc = -ENOMEM;
if (!mm)
- goto unlock;
- mmput(tsk->mm);
+ return -ENOMEM;
+
+ /* Now lets check again if somebody attached ptrace etc */
+ task_lock(tsk);
+ if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
+ tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+ mmput(mm);
+ task_unlock(tsk);
+ return -EINVAL;
+ }
+
+ /* ok, we are alone. No ptrace, no threads, etc. */
+ old_mm = tsk->mm;
tsk->mm = tsk->active_mm = mm;
preempt_disable();
update_mm(mm, tsk);
cpu_set(smp_processor_id(), mm->cpu_vm_mask);
preempt_enable();
- rc = 0;
-unlock:
task_unlock(tsk);
- return rc;
+ mmput(old_mm);
+ return 0;
}
EXPORT_SYMBOL_GPL(s390_enable_sie);
{
struct memory_segment *tmp;
- if (seg->start + seg->size >= VMEM_MAX_PHYS ||
+ if (seg->start + seg->size > VMEM_MAX_PHYS ||
seg->start + seg->size < seg->start)
return -ERANGE;
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
+cflags-y += $(call cc-option,-mno-fdpic)
+
#
# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
# support it, while -Wa,-dsp by itself limits the range of usable opcodes
static struct plat_sci_port sci_platform_data[] = {
{
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ },{
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ },{
+ .mapbase = 0xffe20000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+ },{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.resource = rtc_resources,
};
+static struct resource sh7723_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh7723_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
+ .resource = sh7723_usb_host_resources,
+};
+
static struct platform_device *sh7723_devices[] __initdata = {
&sci_device,
&rtc_device,
+ &sh7723_usb_host_device,
};
static int __init sh7723_devices_setup(void)
};
static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
+ NULL, irq_mask_registers, irq_prio_registers,
+ irq_sense_registers);
+
/* External interrupt pins in IRL mode */
static struct intc_vect irl_vectors[] __initdata = {
};
static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, NULL, irl7654_mask_registers, NULL, NULL);
+ NULL, irl7654_mask_registers, NULL, NULL);
static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, NULL, irl3210_mask_registers, NULL, NULL);
+ NULL, irl3210_mask_registers, NULL, NULL);
#define INTC_ICR0 0xffd00000
#define INTC_INTMSK0 0xffd00044
{
int status, n, ret = 0;
- if (ptrace(PTRACE_CONT, pid, 0, 0) < 0)
- fatal_perror("stop_ptraced_child : ptrace failed");
+ if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) {
+ perror("stop_ptraced_child : ptrace failed");
+ return -1;
+ }
CATCH_EINTR(n = waitpid(pid, &status, 0));
if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
int exit_with = WEXITSTATUS(status);
if (n < 0)
fatal_perror("check_sysemu : wait failed");
if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
- fatal("check_sysemu : expected SIGTRAP, got status = %d",
+ fatal("check_sysemu : expected SIGTRAP, got status = %d\n",
status);
if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
if (WIFSTOPPED(status) &&
(WSTOPSIG(status) == (SIGTRAP|0x80))) {
- if (!count)
- fatal("check_ptrace : SYSEMU_SINGLESTEP "
- "doesn't singlestep");
+ if (!count) {
+ non_fatal("check_ptrace : SYSEMU_SINGLESTEP "
+ "doesn't singlestep");
+ goto fail;
+ }
n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
os_getpid());
if (n < 0)
}
else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP))
count++;
- else
- fatal("check_ptrace : expected SIGTRAP or "
- "(SIGTRAP | 0x80), got status = %d", status);
+ else {
+ non_fatal("check_ptrace : expected SIGTRAP or "
+ "(SIGTRAP | 0x80), got status = %d\n",
+ status);
+ goto fail;
+ }
}
if (stop_ptraced_child(pid, 0, 0) < 0)
goto fail_stopped;
#include <errno.h>
#include <sys/ptrace.h>
-#include <asm/user.h>
+#include <sys/user.h>
#include "kern_constants.h"
#include "longjmp.h"
#include "user.h"
void arch_init_registers(int pid)
{
- struct user_fxsr_struct fpx_regs;
+ struct user_fpxregs_struct fpx_regs;
int err;
err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on !(X86_VISWS || X86_VOYAGER)
help
Turning on this option will allow you to run a paravirtualized clock
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_CLOCK
+ bool
+ default n
+
endif
config MEMTEST_BOOTPARAM
int enable_a20(void)
{
- int loops = A20_ENABLE_LOOPS;
-
#if defined(CONFIG_X86_ELAN)
/* Elan croaks if we try to touch the KBC */
enable_a20_fast();
enable_a20_kbc();
return 0;
#else
+ int loops = A20_ENABLE_LOOPS;
while (loops--) {
/* First, check to see if A20 is already enabled
(legacy free, etc.) */
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
# int/exception return?
static int has_vsa2 = -1;
if (has_vsa2 == -1) {
+ u16 val;
+
/*
* The VSA has virtual registers that we can query for a
* signature.
outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
- has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+ val = inw(VSA_VRC_DATA);
+ has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
}
return has_vsa2;
* this stage.
*/
-#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
xorl %ebx,%ebx /* %ebx is kept at zero */
{
int apic1, pin1, apic2, pin2;
int vector;
- unsigned int ver;
unsigned long flags;
local_irq_save(flags);
- ver = apic_read(APIC_LVR);
- ver = GET_APIC_VERSION(ver);
-
/*
* get/set the timer IRQ vector:
*/
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
- * disabled in the local APIC. Finally timer interrupts
- * need to be acknowledged manually in the 8259A for
- * timer_interrupt() and for the i82489DX when using
- * the NMI watchdog.
+ * disabled in the local APIC.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = !cpu_has_tsc;
- timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+ timer_ack = 1;
if (timer_over_8254 > 0)
enable_8259A_irq(0);
#include <linux/clocksource.h>
#include <linux/kvm_para.h>
+#include <asm/pvclock.h>
#include <asm/arch_hooks.h>
#include <asm/msr.h>
#include <asm/apic.h>
early_param("no-kvmclock", parse_no_kvmclock);
/* The hypervisor will put information about time periodically here */
-static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock);
-#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock);
+static struct pvclock_wall_clock wall_clock;
-static inline u64 kvm_get_delta(u64 last_tsc)
-{
- int cpu = smp_processor_id();
- u64 delta = native_read_tsc() - last_tsc;
- return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE;
-}
-
-static struct kvm_wall_clock wall_clock;
-static cycle_t kvm_clock_read(void);
/*
* The wallclock is the time of day when we booted. Since then, some time may
* have elapsed since the hypervisor wrote the data. So we try to account for
*/
static unsigned long kvm_get_wallclock(void)
{
- u32 wc_sec, wc_nsec;
- u64 delta;
+ struct pvclock_vcpu_time_info *vcpu_time;
struct timespec ts;
- int version, nsec;
int low, high;
low = (int)__pa(&wall_clock);
high = ((u64)__pa(&wall_clock) >> 32);
+ native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
- delta = kvm_clock_read();
+ vcpu_time = &get_cpu_var(hv_clock);
+ pvclock_read_wallclock(&wall_clock, vcpu_time, &ts);
+ put_cpu_var(hv_clock);
- native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
- do {
- version = wall_clock.wc_version;
- rmb();
- wc_sec = wall_clock.wc_sec;
- wc_nsec = wall_clock.wc_nsec;
- rmb();
- } while ((wall_clock.wc_version != version) || (version & 1));
-
- delta = kvm_clock_read() - delta;
- delta += wc_nsec;
- nsec = do_div(delta, NSEC_PER_SEC);
- set_normalized_timespec(&ts, wc_sec + delta, nsec);
- /*
- * Of all mechanisms of time adjustment I've tested, this one
- * was the champion!
- */
- return ts.tv_sec + 1;
+ return ts.tv_sec;
}
static int kvm_set_wallclock(unsigned long now)
{
- return 0;
+ return -1;
}
-/*
- * This is our read_clock function. The host puts an tsc timestamp each time
- * it updates a new time. Without the tsc adjustment, we can have a situation
- * in which a vcpu starts to run earlier (smaller system_time), but probes
- * time later (compared to another vcpu), leading to backwards time
- */
static cycle_t kvm_clock_read(void)
{
- u64 last_tsc, now;
- int cpu;
+ struct pvclock_vcpu_time_info *src;
+ cycle_t ret;
- preempt_disable();
- cpu = smp_processor_id();
-
- last_tsc = get_clock(cpu, tsc_timestamp);
- now = get_clock(cpu, system_time);
-
- now += kvm_get_delta(last_tsc);
- preempt_enable();
-
- return now;
+ src = &get_cpu_var(hv_clock);
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(hv_clock);
+ return ret;
}
+
static struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int kvm_register_clock(void)
+static int kvm_register_clock(char *txt)
{
int cpu = smp_processor_id();
int low, high;
low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1;
high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32);
-
+ printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n",
+ cpu, high, low, txt);
return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
}
* Now that the first cpu already had this clocksource initialized,
* we shouldn't fail.
*/
- WARN_ON(kvm_register_clock());
+ WARN_ON(kvm_register_clock("secondary cpu clock"));
/* ok, done with our trickery, call native */
setup_secondary_APIC_clock();
}
#endif
+#ifdef CONFIG_SMP
+void __init kvm_smp_prepare_boot_cpu(void)
+{
+ WARN_ON(kvm_register_clock("primary cpu clock"));
+ native_smp_prepare_boot_cpu();
+}
+#endif
+
/*
* After the clock is registered, the host will keep writing to the
* registered memory location. If the guest happens to shutdown, this memory
return;
if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
- if (kvm_register_clock())
+ if (kvm_register_clock("boot clock"))
return;
pv_time_ops.get_wallclock = kvm_get_wallclock;
pv_time_ops.set_wallclock = kvm_set_wallclock;
pv_time_ops.sched_clock = kvm_clock_read;
#ifdef CONFIG_X86_LOCAL_APIC
pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
+#endif
+#ifdef CONFIG_SMP
+ smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
#endif
machine_ops.shutdown = kvm_shutdown;
#ifdef CONFIG_KEXEC
wrmsr(msr, value, dummy);
return 0;
}
+EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
{
/* No timers available - too bad */
return -1;
}
+EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
#ifdef CONFIG_GEODE_MFGPT_TIMER
#include <asm/smp.h>
#include <asm/nmi.h>
-#include <asm/timer.h>
#include "mach_traps.h"
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
- goto error;
+ return -1;
printk(KERN_INFO "Testing NMI watchdog ... ");
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
- goto error;
+ return -1;
}
printk("OK.\n");
kfree(prev_nmi_count);
return 0;
-error:
- timer_ack = !cpu_has_tsc;
-
- return -1;
}
static int __init setup_nmi_watchdog(char *str)
struct page *page;
unsigned long dma_mask = 0;
dma_addr_t bus;
+ int noretry = 0;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
if (dev->dma_mask == NULL)
return NULL;
- /* Don't invoke OOM killer */
- gfp |= __GFP_NORETRY;
+ /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
+ if (gfp & __GFP_DMA)
+ noretry = 1;
#ifdef CONFIG_X86_64
/* Why <=? Even when the mask is smaller than 4GB it is often
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
gfp |= GFP_DMA32;
+ if (dma_mask < DMA_32BIT_MASK)
+ noretry = 1;
+ }
#endif
again:
- page = dma_alloc_pages(dev, gfp, get_order(size));
+ page = dma_alloc_pages(dev,
+ noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
if (page == NULL)
return NULL;
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
--- /dev/null
+/* paravirtual clock -- common code used by kvm/xen
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <asm/pvclock.h>
+
+/*
+ * These are perodically updated
+ * xen: magic shared_info page
+ * kvm: gpa registered via msr
+ * and then copied here.
+ */
+struct pvclock_shadow_time {
+ u64 tsc_timestamp; /* TSC at last update of time vals. */
+ u64 system_timestamp; /* Time, in nanosecs, since boot. */
+ u32 tsc_to_nsec_mul;
+ int tsc_shift;
+ u32 version;
+};
+
+/*
+ * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
+ * yielding a 64-bit result.
+ */
+static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
+{
+ u64 product;
+#ifdef __i386__
+ u32 tmp1, tmp2;
+#endif
+
+ if (shift < 0)
+ delta >>= -shift;
+ else
+ delta <<= shift;
+
+#ifdef __i386__
+ __asm__ (
+ "mul %5 ; "
+ "mov %4,%%eax ; "
+ "mov %%edx,%4 ; "
+ "mul %5 ; "
+ "xor %5,%5 ; "
+ "add %4,%%eax ; "
+ "adc %5,%%edx ; "
+ : "=A" (product), "=r" (tmp1), "=r" (tmp2)
+ : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
+#elif __x86_64__
+ __asm__ (
+ "mul %%rdx ; shrd $32,%%rdx,%%rax"
+ : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+#else
+#error implement me!
+#endif
+
+ return product;
+}
+
+static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
+{
+ u64 delta = native_read_tsc() - shadow->tsc_timestamp;
+ return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
+}
+
+/*
+ * Reads a consistent set of time-base values from hypervisor,
+ * into a shadow data area.
+ */
+static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst,
+ struct pvclock_vcpu_time_info *src)
+{
+ do {
+ dst->version = src->version;
+ rmb(); /* fetch version before data */
+ dst->tsc_timestamp = src->tsc_timestamp;
+ dst->system_timestamp = src->system_time;
+ dst->tsc_to_nsec_mul = src->tsc_to_system_mul;
+ dst->tsc_shift = src->tsc_shift;
+ rmb(); /* test version after fetching data */
+ } while ((src->version & 1) || (dst->version != src->version));
+
+ return dst->version;
+}
+
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
+{
+ struct pvclock_shadow_time shadow;
+ unsigned version;
+ cycle_t ret, offset;
+
+ do {
+ version = pvclock_get_time_values(&shadow, src);
+ barrier();
+ offset = pvclock_get_nsec_offset(&shadow);
+ ret = shadow.system_timestamp + offset;
+ barrier();
+ } while (version != src->version);
+
+ return ret;
+}
+
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
+ struct pvclock_vcpu_time_info *vcpu_time,
+ struct timespec *ts)
+{
+ u32 version;
+ u64 delta;
+ struct timespec now;
+
+ /* get wallclock at system boot */
+ do {
+ version = wall_clock->version;
+ rmb(); /* fetch version before time */
+ now.tv_sec = wall_clock->sec;
+ now.tv_nsec = wall_clock->nsec;
+ rmb(); /* fetch time before checking version */
+ } while ((wall_clock->version & 1) || (version != wall_clock->version));
+
+ delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */
+ delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
+
+ now.tv_nsec = do_div(delta, NSEC_PER_SEC);
+ now.tv_sec = delta;
+
+ set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+}
#include <linux/acpi.h>
#include <linux/bcd.h>
#include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+#include <linux/pnp.h>
#include <asm/time.h>
#include <asm/vsyscall.h>
}
EXPORT_SYMBOL(native_read_tsc);
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(1),
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
+static __init int add_rtc_cmos(void)
+{
+#ifdef CONFIG_PNP
+ if (!pnp_platform_devices)
+ platform_device_register(&rtc_device);
+#else
+ platform_device_register(&rtc_device);
+#endif /* CONFIG_PNP */
+ return 0;
+}
+device_initcall(add_rtc_cmos);
(unsigned long)(crash_size >> 20),
(unsigned long)(crash_base >> 20),
(unsigned long)(total_mem >> 20));
+
+ if (reserve_bootmem(crash_base, crash_size,
+ BOOTMEM_EXCLUSIVE) < 0) {
+ printk(KERN_INFO "crashkernel reservation "
+ "failed - memory is in use\n");
+ return;
+ }
+
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
- reserve_bootmem(crash_base, crash_size,
- BOOTMEM_DEFAULT);
} else
printk(KERN_INFO "crashkernel reservation failed - "
"you have to specify a base address\n");
#define DO_ERROR(trapnr, signr, str, name) \
void do_##name(struct pt_regs *regs, long error_code) \
{ \
+ trace_hardirqs_fixup(); \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
#include "mach_timer.h"
-static int tsc_disabled;
+/* native_sched_clock() is called before tsc_init(), so
+ we must start with the TSC soft disabled to prevent
+ erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
/*
* On some systems the TSC frequency does not
{
int cpu;
- if (!cpu_has_tsc || tsc_disabled) {
- /* Disable the TSC in case of !cpu_has_tsc */
- tsc_disabled = 1;
+ if (!cpu_has_tsc || tsc_disabled > 0)
return;
- }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
- /*
- * We need to disable the TSC completely in this case
- * to prevent sched_clock() from using it.
- */
- tsc_disabled = 1;
return;
}
+ /* now allow native_sched_clock() to use rdtsc */
+ tsc_disabled = 0;
+
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
atomic_inc(&pt->pending);
smp_mb__after_atomic_inc();
- /* FIXME: handle case where the guest is in guest mode */
- if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
- vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
- wake_up_interruptible(&vcpu0->wq);
+ if (vcpu0) {
+ set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
+ if (waitqueue_active(&vcpu0->wq)) {
+ vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+ wake_up_interruptible(&vcpu0->wq);
+ }
}
pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
return HRTIMER_NORESTART;
}
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
+{
+ struct kvm_pit *pit = vcpu->kvm->arch.vpit;
+ struct hrtimer *timer;
+
+ if (vcpu->vcpu_id != 0 || !pit)
+ return;
+
+ timer = &pit->pit_state.pit_timer.timer;
+ if (hrtimer_cancel(timer))
+ hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+}
+
static void destroy_pit_timer(struct kvm_kpit_timer *pt)
{
pr_debug("pit: execute del timer!\n");
/* TODO: PIT, RTC etc. */
}
EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
+
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
+{
+ __kvm_migrate_apic_timer(vcpu);
+ __kvm_migrate_pit_timer(vcpu);
+}
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu);
int pit_has_pending_timer(struct kvm_vcpu *vcpu);
int apic_has_pending_timer(struct kvm_vcpu *vcpu);
wait_queue_head_t *q = &apic->vcpu->wq;
atomic_inc(&apic->timer.pending);
+ set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
if (waitqueue_active(q)) {
apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
wake_up_interruptible(q);
rmap_remove(kvm, spte);
--kvm->stat.lpages;
set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+ spte = NULL;
write_protected = 1;
}
spte = rmap_next(kvm, rmapp, spte);
u64 *end;
for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++)
- if (*pos != shadow_trap_nonpresent_pte) {
+ if (is_shadow_present_pte(*pos)) {
printk(KERN_ERR "%s: %p %llx\n", __func__,
pos, *pos);
return 0;
struct kvm_mmu_page *shadow;
spte |= PT_WRITABLE_MASK;
- if (user_fault) {
- mmu_unshadow(vcpu->kvm, gfn);
- goto unshadowed;
- }
shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn);
if (shadow ||
}
}
-unshadowed:
-
if (pte_access & ACC_WRITE_MASK)
mark_page_dirty(vcpu->kvm, gfn);
u64 *spte,
const void *new)
{
- if ((sp->role.level != PT_PAGE_TABLE_LEVEL)
- && !vcpu->arch.update_pte.largepage) {
- ++vcpu->kvm->stat.mmu_pde_zapped;
- return;
- }
+ if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
+ if (!vcpu->arch.update_pte.largepage ||
+ sp->role.glevels == PT32_ROOT_LEVEL) {
+ ++vcpu->kvm->stat.mmu_pde_zapped;
+ return;
+ }
+ }
++vcpu->kvm->stat.mmu_pte_updated;
if (sp->role.glevels == PT32_ROOT_LEVEL)
sp = container_of(vcpu->kvm->arch.active_mmu_pages.next,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(vcpu->kvm, sp);
+ cond_resched();
}
free_page((unsigned long)vcpu->arch.mmu.pae_root);
}
/* mmio */
if (is_error_pfn(pfn)) {
- pgprintk("gfn %x is mmio\n", walker.gfn);
+ pgprintk("gfn %lx is mmio\n", walker.gfn);
kvm_release_pfn_clean(pfn);
return 1;
}
delta = vcpu->arch.host_tsc - tsc_this;
svm->vmcb->control.tsc_offset += delta;
vcpu->cpu = cpu;
- kvm_migrate_apic_timer(vcpu);
+ kvm_migrate_timers(vcpu);
}
for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
load_transition_efer(vmx);
}
-static void vmx_load_host_state(struct vcpu_vmx *vmx)
+static void __vmx_load_host_state(struct vcpu_vmx *vmx)
{
unsigned long flags;
reload_host_efer(vmx);
}
+static void vmx_load_host_state(struct vcpu_vmx *vmx)
+{
+ preempt_disable();
+ __vmx_load_host_state(vmx);
+ preempt_enable();
+}
+
/*
* Switches to specified vcpu, until a matching vcpu_put(), but assumes
* vcpu mutex is already taken.
if (vcpu->cpu != cpu) {
vcpu_clear(vmx);
- kvm_migrate_apic_timer(vcpu);
+ kvm_migrate_timers(vcpu);
vpid_sync_vcpu_all(vmx);
}
static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
{
- vmx_load_host_state(to_vmx(vcpu));
+ __vmx_load_host_state(to_vmx(vcpu));
}
static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
switch (msr_index) {
#ifdef CONFIG_X86_64
case MSR_EFER:
+ vmx_load_host_state(vmx);
ret = kvm_set_msr_common(vcpu, msr_index, data);
- if (vmx->host_state.loaded) {
- reload_host_efer(vmx);
- load_transition_efer(vmx);
- }
break;
case MSR_FS_BASE:
vmcs_writel(GUEST_FS_BASE, data);
guest_write_tsc(data);
break;
default:
+ vmx_load_host_state(vmx);
msr = find_msr_entry(vmx, msr_index);
if (msr) {
msr->data = data;
- if (vmx->host_state.loaded)
- load_msrs(vmx->guest_msrs, vmx->save_nmsrs);
break;
}
ret = kvm_set_msr_common(vcpu, msr_index, data);
static void hardware_disable(void *garbage)
{
asm volatile (ASM_VMX_VMXOFF : : : "cc");
+ write_cr4(read_cr4() & ~X86_CR4_VMXE);
}
static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
{
static int version;
- struct kvm_wall_clock wc;
- struct timespec wc_ts;
+ struct pvclock_wall_clock wc;
+ struct timespec now, sys, boot;
if (!wall_clock)
return;
kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
- wc_ts = current_kernel_time();
- wc.wc_sec = wc_ts.tv_sec;
- wc.wc_nsec = wc_ts.tv_nsec;
- wc.wc_version = version;
+ /*
+ * The guest calculates current wall clock time by adding
+ * system time (updated by kvm_write_guest_time below) to the
+ * wall clock specified here. guest system time equals host
+ * system time for us, thus we must fill in host boot time here.
+ */
+ now = current_kernel_time();
+ ktime_get_ts(&sys);
+ boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys));
+
+ wc.sec = boot.tv_sec;
+ wc.nsec = boot.tv_nsec;
+ wc.version = version;
kvm_write_guest(kvm, wall_clock, &wc, sizeof(wc));
kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
}
+static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
+{
+ uint32_t quotient, remainder;
+
+ /* Don't try to replace with do_div(), this one calculates
+ * "(dividend << 32) / divisor" */
+ __asm__ ( "divl %4"
+ : "=a" (quotient), "=d" (remainder)
+ : "0" (0), "1" (dividend), "r" (divisor) );
+ return quotient;
+}
+
+static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *hv_clock)
+{
+ uint64_t nsecs = 1000000000LL;
+ int32_t shift = 0;
+ uint64_t tps64;
+ uint32_t tps32;
+
+ tps64 = tsc_khz * 1000LL;
+ while (tps64 > nsecs*2) {
+ tps64 >>= 1;
+ shift--;
+ }
+
+ tps32 = (uint32_t)tps64;
+ while (tps32 <= (uint32_t)nsecs) {
+ tps32 <<= 1;
+ shift++;
+ }
+
+ hv_clock->tsc_shift = shift;
+ hv_clock->tsc_to_system_mul = div_frac(nsecs, tps32);
+
+ pr_debug("%s: tsc_khz %u, tsc_shift %d, tsc_mul %u\n",
+ __FUNCTION__, tsc_khz, hv_clock->tsc_shift,
+ hv_clock->tsc_to_system_mul);
+}
+
static void kvm_write_guest_time(struct kvm_vcpu *v)
{
struct timespec ts;
if ((!vcpu->time_page))
return;
+ if (unlikely(vcpu->hv_clock_tsc_khz != tsc_khz)) {
+ kvm_set_time_scale(tsc_khz, &vcpu->hv_clock);
+ vcpu->hv_clock_tsc_khz = tsc_khz;
+ }
+
/* Keep irq disabled to prevent changes to the clock */
local_irq_save(flags);
kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
/*
* The interface expects us to write an even number signaling that the
* update is finished. Since the guest won't see the intermediate
- * state, we just write "2" at the end
+ * state, we just increase by 2 at the end.
*/
- vcpu->hv_clock.version = 2;
+ vcpu->hv_clock.version += 2;
shared_kaddr = kmap_atomic(vcpu->time_page, KM_USER0);
memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock,
- sizeof(vcpu->hv_clock));
+ sizeof(vcpu->hv_clock));
kunmap_atomic(shared_kaddr, KM_USER0);
/* ...but clean it before doing the actual write */
vcpu->arch.time_offset = data & ~(PAGE_MASK | 1);
- vcpu->arch.hv_clock.tsc_to_system_mul =
- clocksource_khz2mult(tsc_khz, 22);
- vcpu->arch.hv_clock.tsc_shift = 22;
-
down_read(¤t->mm->mmap_sem);
vcpu->arch.time_page =
gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT);
if (vcpu->requests) {
if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
- __kvm_migrate_apic_timer(vcpu);
+ __kvm_migrate_timers(vcpu);
+ if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
+ kvm_x86_ops->tlb_flush(vcpu);
if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
&vcpu->requests)) {
kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
}
}
+ clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
kvm_inject_pending_timer_irqs(vcpu);
preempt_disable();
local_irq_disable();
- if (need_resched()) {
+ if (vcpu->requests || need_resched()) {
local_irq_enable();
preempt_enable();
r = 1;
goto out;
}
- if (vcpu->requests)
- if (test_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests)) {
- local_irq_enable();
- preempt_enable();
- r = 1;
- goto out;
- }
-
if (signal_pending(current)) {
local_irq_enable();
preempt_enable();
kvm_guest_enter();
- if (vcpu->requests)
- if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
- kvm_x86_ops->tlb_flush(vcpu);
KVMTRACE_0D(VMENTRY, vcpu, entryexit);
kvm_x86_ops->run(vcpu, kvm_run);
if (rc)
goto done;
- kvm_emulate_hypercall(ctxt->vcpu);
+ /* Let the processor re-execute the fixed hypercall */
+ c->eip = ctxt->vcpu->arch.rip;
/* Disable writeback. */
c->dst.type = OP_NONE;
break;
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
unsigned long pgd_paddr;
pmd_t *pmd_k;
pte_t *pte_k;
+
+ /* Make sure we are in vmalloc area */
+ if (!(address >= VMALLOC_START && address < VMALLOC_END))
+ return -1;
+
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
return numa_off || acpi_numa < 0;
}
-/*
- * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
- * up the NUMA heuristics which wants the local node to have a smaller
- * distance than the others.
- * Do some quick checks here and only use the SLIT if it passes.
- */
-static __init int slit_valid(struct acpi_table_slit *slit)
-{
- int i, j;
- int d = slit->locality_count;
- for (i = 0; i < d; i++) {
- for (j = 0; j < d; j++) {
- u8 val = slit->entry[d*i + j];
- if (i == j) {
- if (val != LOCAL_DISTANCE)
- return 0;
- } else if (val <= LOCAL_DISTANCE)
- return 0;
- }
- }
- return 1;
-}
-
/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
- if (!slit_valid(slit)) {
- printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
- return;
- }
acpi_slit = slit;
}
#endif
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
{}
config XEN
bool "Xen guest support"
select PARAVIRT
+ select PARAVIRT_CLOCK
depends on X86_32
- depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER)
+ depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
help
This is the Linux Xen port. Enabling this will allow the
kernel to boot in a paravirtualized environment under the
static __init void xen_pagetable_setup_start(pgd_t *base)
{
pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
+ int i;
/* special set_pte for pagetable initialization */
pv_mmu_ops.set_pte = xen_set_pte_init;
init_mm.pgd = base;
/*
- * copy top-level of Xen-supplied pagetable into place. For
- * !PAE we can use this as-is, but for PAE it is a stand-in
- * while we copy the pmd pages.
+ * copy top-level of Xen-supplied pagetable into place. This
+ * is a stand-in while we copy the pmd pages.
*/
memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
- if (PTRS_PER_PMD > 1) {
- int i;
- /*
- * For PAE, need to allocate new pmds, rather than
- * share Xen's, since Xen doesn't like pmd's being
- * shared between address spaces.
- */
- for (i = 0; i < PTRS_PER_PGD; i++) {
- if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
- pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+ /*
+ * For PAE, need to allocate new pmds, rather than
+ * share Xen's, since Xen doesn't like pmd's being
+ * shared between address spaces.
+ */
+ for (i = 0; i < PTRS_PER_PGD; i++) {
+ if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
+ pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
- memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
- PAGE_SIZE);
+ memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
+ PAGE_SIZE);
- make_lowmem_page_readonly(pmd);
+ make_lowmem_page_readonly(pmd);
- set_pgd(&base[i], __pgd(1 + __pa(pmd)));
- } else
- pgd_clear(&base[i]);
- }
+ set_pgd(&base[i], __pgd(1 + __pa(pmd)));
+ } else
+ pgd_clear(&base[i]);
}
/* make sure zero_page is mapped RO so we can use it in pagetables */
/* Actually pin the pagetable down, but we can't set PG_pinned
yet because the page structures don't exist yet. */
- {
- unsigned level;
-
-#ifdef CONFIG_X86_PAE
- level = MMUEXT_PIN_L3_TABLE;
-#else
- level = MMUEXT_PIN_L2_TABLE;
-#endif
-
- pin_pagetable_pfn(level, PFN_DOWN(__pa(base)));
- }
+ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
}
/* This is called once we have the cpu_possible_map */
.make_pte = xen_make_pte,
.make_pgd = xen_make_pgd,
-#ifdef CONFIG_X86_PAE
.set_pte_atomic = xen_set_pte_atomic,
.set_pte_present = xen_set_pte_at,
.set_pud = xen_set_pud,
.make_pmd = xen_make_pmd,
.pmd_val = xen_pmd_val,
-#endif /* PAE */
.activate_mm = xen_activate_mm,
.dup_mmap = xen_dup_mmap,
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
+ /* Prevent unwanted bits from being set in PTEs. */
+ __supported_pte_mask &= ~_PAGE_GLOBAL;
+ if (!is_initial_xendomain())
+ __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
/* set the limit of our address space */
xen_reserve_top();
preempt_enable();
}
-pteval_t xen_pte_val(pte_t pte)
+/* Assume pteval_t is equivalent to all the other *val_t types. */
+static pteval_t pte_mfn_to_pfn(pteval_t val)
+{
+ if (val & _PAGE_PRESENT) {
+ unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & ~PTE_MASK;
+ val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
+ }
+
+ return val;
+}
+
+static pteval_t pte_pfn_to_mfn(pteval_t val)
{
- pteval_t ret = pte.pte;
+ if (val & _PAGE_PRESENT) {
+ unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
+ pteval_t flags = val & ~PTE_MASK;
+ val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
+ }
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
+ return val;
+}
- return ret;
+pteval_t xen_pte_val(pte_t pte)
+{
+ return pte_mfn_to_pfn(pte.pte);
}
pgdval_t xen_pgd_val(pgd_t pgd)
{
- pgdval_t ret = pgd.pgd;
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
- return ret;
+ return pte_mfn_to_pfn(pgd.pgd);
}
pte_t xen_make_pte(pteval_t pte)
{
- if (pte & _PAGE_PRESENT) {
- pte = phys_to_machine(XPADDR(pte)).maddr;
- pte &= ~(_PAGE_PCD | _PAGE_PWT);
- }
-
- return (pte_t){ .pte = pte };
+ pte = pte_pfn_to_mfn(pte);
+ return native_make_pte(pte);
}
pgd_t xen_make_pgd(pgdval_t pgd)
{
- if (pgd & _PAGE_PRESENT)
- pgd = phys_to_machine(XPADDR(pgd)).maddr;
-
- return (pgd_t){ pgd };
+ pgd = pte_pfn_to_mfn(pgd);
+ return native_make_pgd(pgd);
}
pmdval_t xen_pmd_val(pmd_t pmd)
{
- pmdval_t ret = native_pmd_val(pmd);
- if (ret & _PAGE_PRESENT)
- ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT;
- return ret;
+ return pte_mfn_to_pfn(pmd.pmd);
}
-#ifdef CONFIG_X86_PAE
+
void xen_set_pud(pud_t *ptr, pud_t val)
{
struct multicall_space mcs;
pmd_t xen_make_pmd(pmdval_t pmd)
{
- if (pmd & _PAGE_PRESENT)
- pmd = phys_to_machine(XPADDR(pmd)).maddr;
-
+ pmd = pte_pfn_to_mfn(pmd);
return native_make_pmd(pmd);
}
-#else /* !PAE */
-void xen_set_pte(pte_t *ptep, pte_t pte)
-{
- *ptep = pte;
-}
-#endif /* CONFIG_X86_PAE */
/*
(Yet another) pagetable walker. This one is intended for pinning a
read-only, and can be pinned. */
void xen_pgd_pin(pgd_t *pgd)
{
- unsigned level;
-
xen_mc_batch();
if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
xen_mc_batch();
}
-#ifdef CONFIG_X86_PAE
- level = MMUEXT_PIN_L3_TABLE;
-#else
- level = MMUEXT_PIN_L2_TABLE;
-#endif
-
- xen_do_pin(level, PFN_DOWN(__pa(pgd)));
-
+ xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
xen_mc_issue(0);
}
void xen_pgd_pin(pgd_t *pgd);
//void xen_pgd_unpin(pgd_t *pgd);
-#ifdef CONFIG_X86_PAE
-unsigned long long xen_pte_val(pte_t);
-unsigned long long xen_pmd_val(pmd_t);
-unsigned long long xen_pgd_val(pgd_t);
+pteval_t xen_pte_val(pte_t);
+pmdval_t xen_pmd_val(pmd_t);
+pgdval_t xen_pgd_val(pgd_t);
-pte_t xen_make_pte(unsigned long long);
-pmd_t xen_make_pmd(unsigned long long);
-pgd_t xen_make_pgd(unsigned long long);
+pte_t xen_make_pte(pteval_t);
+pmd_t xen_make_pmd(pmdval_t);
+pgd_t xen_make_pgd(pgdval_t);
void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval);
void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
void xen_pmd_clear(pmd_t *pmdp);
-
-#else
-unsigned long xen_pte_val(pte_t);
-unsigned long xen_pmd_val(pmd_t);
-unsigned long xen_pgd_val(pgd_t);
-
-pte_t xen_make_pte(unsigned long);
-pmd_t xen_make_pmd(unsigned long);
-pgd_t xen_make_pgd(unsigned long);
-#endif
-
#endif /* _XEN_MMU_H */
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/kernel_stat.h>
+#include <linux/math64.h>
+#include <asm/pvclock.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
static cycle_t xen_clocksource_read(void);
-/* These are perodically updated in shared_info, and then copied here. */
-struct shadow_time_info {
- u64 tsc_timestamp; /* TSC at last update of time vals. */
- u64 system_timestamp; /* Time, in nanosecs, since boot. */
- u32 tsc_to_nsec_mul;
- int tsc_shift;
- u32 version;
-};
-
-static DEFINE_PER_CPU(struct shadow_time_info, shadow_time);
-
/* runstate info updated by Xen */
static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
if (stolen < 0)
stolen = 0;
- ticks = 0;
- while (stolen >= NS_PER_TICK) {
- ticks++;
- stolen -= NS_PER_TICK;
- }
+ ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
__get_cpu_var(residual_stolen) = stolen;
account_steal_time(NULL, ticks);
if (blocked < 0)
blocked = 0;
- ticks = 0;
- while (blocked >= NS_PER_TICK) {
- ticks++;
- blocked -= NS_PER_TICK;
- }
+ ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
__get_cpu_var(residual_blocked) = blocked;
account_steal_time(idle_task(smp_processor_id()), ticks);
}
unsigned long xen_cpu_khz(void)
{
u64 xen_khz = 1000000ULL << 32;
- const struct vcpu_time_info *info =
+ const struct pvclock_vcpu_time_info *info =
&HYPERVISOR_shared_info->vcpu_info[0].time;
do_div(xen_khz, info->tsc_to_system_mul);
return xen_khz;
}
-/*
- * Reads a consistent set of time-base values from Xen, into a shadow data
- * area.
- */
-static unsigned get_time_values_from_xen(void)
-{
- struct vcpu_time_info *src;
- struct shadow_time_info *dst;
-
- /* src is shared memory with the hypervisor, so we need to
- make sure we get a consistent snapshot, even in the face of
- being preempted. */
- src = &__get_cpu_var(xen_vcpu)->time;
- dst = &__get_cpu_var(shadow_time);
-
- do {
- dst->version = src->version;
- rmb(); /* fetch version before data */
- dst->tsc_timestamp = src->tsc_timestamp;
- dst->system_timestamp = src->system_time;
- dst->tsc_to_nsec_mul = src->tsc_to_system_mul;
- dst->tsc_shift = src->tsc_shift;
- rmb(); /* test version after fetching data */
- } while ((src->version & 1) | (dst->version ^ src->version));
-
- return dst->version;
-}
-
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if (shift < 0)
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "xor %5,%5 ; "
- "add %4,%%eax ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
- return product;
-}
-
-static u64 get_nsec_offset(struct shadow_time_info *shadow)
-{
- u64 now, delta;
- now = native_read_tsc();
- delta = now - shadow->tsc_timestamp;
- return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
-}
-
static cycle_t xen_clocksource_read(void)
{
- struct shadow_time_info *shadow = &get_cpu_var(shadow_time);
+ struct pvclock_vcpu_time_info *src;
cycle_t ret;
- unsigned version;
-
- do {
- version = get_time_values_from_xen();
- barrier();
- ret = shadow->system_timestamp + get_nsec_offset(shadow);
- barrier();
- } while (version != __get_cpu_var(xen_vcpu)->time.version);
-
- put_cpu_var(shadow_time);
+ src = &get_cpu_var(xen_vcpu)->time;
+ ret = pvclock_clocksource_read(src);
+ put_cpu_var(xen_vcpu);
return ret;
}
static void xen_read_wallclock(struct timespec *ts)
{
- const struct shared_info *s = HYPERVISOR_shared_info;
- u32 version;
- u64 delta;
- struct timespec now;
-
- /* get wallclock at system boot */
- do {
- version = s->wc_version;
- rmb(); /* fetch version before time */
- now.tv_sec = s->wc_sec;
- now.tv_nsec = s->wc_nsec;
- rmb(); /* fetch time before checking version */
- } while ((s->wc_version & 1) | (version ^ s->wc_version));
+ struct shared_info *s = HYPERVISOR_shared_info;
+ struct pvclock_wall_clock *wall_clock = &(s->wc);
+ struct pvclock_vcpu_time_info *vcpu_time;
- delta = xen_clocksource_read(); /* time since system boot */
- delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec;
-
- now.tv_nsec = do_div(delta, NSEC_PER_SEC);
- now.tv_sec = delta;
-
- set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
+ vcpu_time = &get_cpu_var(xen_vcpu)->time;
+ pvclock_read_wallclock(wall_clock, vcpu_time, ts);
+ put_cpu_var(xen_vcpu);
}
unsigned long xen_get_wallclock(void)
struct timespec ts;
xen_read_wallclock(&ts);
-
return ts.tv_sec;
}
{
int cpu = smp_processor_id();
- get_time_values_from_xen();
-
clocksource_register(&xen_clocksource);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
__FINIT
-.pushsection .bss.page_aligned
+.pushsection .text
.align PAGE_SIZE_asm
ENTRY(hypercall_page)
.skip 0x1000
ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen)
ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page)
ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb")
-#ifdef CONFIG_X86_PAE
ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes")
-#else
- ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no")
-#endif
ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic")
#endif /*CONFIG_XEN */
{
int n;
va_list args;
+ unsigned long flags;
char *buf;
- preempt_disable();
+ local_irq_save(flags);
buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
va_start(args, fmt);
n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
va_end(args);
trace_note(bt, 0, BLK_TN_MESSAGE, buf, n);
- preempt_enable();
+ local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(__trace_note_message);
/*
* A word about the locking here - we disable interrupts to reserve
* some space in the relay per-cpu buffer, to prevent an irq
- * from coming in and stepping on our toes. Once reserved, it's
- * enough to get preemption disabled to prevent read of this data
- * before we are through filling it. get_cpu()/put_cpu() does this
- * for us
+ * from coming in and stepping on our toes.
*/
local_irq_save(flags);
mutex_lock(&block_class_lock);
list_for_each_entry(dev, &block_class.devices, node) {
+ if (dev->type != &disk_type)
+ continue;
if (strcmp(dev->bus_id, name) == 0) {
struct gendisk *disk = dev_to_disk(dev);
device = ac->device;
switch (event) {
+ default:
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Unsupported event [0x%x]\n", event));
case ACPI_AC_NOTIFY_STATUS:
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
#endif
- break;
- default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
- break;
}
return;
*/
pdev->dev.uevent_suppress = 0;
- if (acpi_bay_add_fs(new_bay)) {
- platform_device_unregister(new_bay->pdev);
- goto bay_add_err;
- }
-
/* register for events on this device */
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
bay_notify, new_bay);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing bay notify handler\n");
+ printk(KERN_INFO PREFIX "Error installing bay notify handler\n");
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
+ }
+
+ if (acpi_bay_add_fs(new_bay)) {
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ bay_notify);
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
}
/* if we are on a dock station, we should register for dock
INIT_LIST_HEAD(&drive_bays);
+ if (acpi_disabled)
+ return -ENODEV;
+
/* look for dockable drive bays */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_bay, &bays, NULL);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- if (!arg) {
- return_ACPI_STATUS(AE_AML_NO_OPERAND);
- }
-
/* Creating new namespace node(s), should not already exist */
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
/*
* Walk the list of entries in the field_list
+ * Note: field_list can be of zero length. In this case, Arg will be NULL.
*/
while (arg) {
/*
goto dock_add_err;
}
- printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION);
+ printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION);
return 0;
dock_station = NULL;
+ if (acpi_disabled)
+ return 0;
+
/* look for a dock station */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_dock, &num, NULL);
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
return 0;
- udelay(ACPI_EC_UDELAY);
+ msleep(1);
}
}
pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
goto cleanup;
}
+ /*
+ * Add the table to the namespace.
+ *
+ * Note: We load the table objects relative to the root of the namespace.
+ * This appears to go against the ACPI specification, but we do it for
+ * compatibility with other ACPI implementations.
+ */
status =
- acpi_ex_add_table(table_index, walk_state->scope_info->scope.node,
- &ddb_handle);
+ acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
/* On error, table_ptr was deallocated above */
static inline void rtc_wake_setup(void)
{
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ /*
+ * After the RTC handler is installed, the Fixed_RTC event should
+ * be disabled. Only when the RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_on(struct device *dev)
{
struct device *dev = get_rtc_dev();
+ if (acpi_disabled)
+ return 0;
+
if (dev) {
rtc_wake_setup();
rtc_info.wake_on = rtc_wake_on;
break;
}
- /* Set the system indicators to show the desired sleep state. */
-
+ /*
+ * Set the system indicators to show the desired sleep state.
+ * _SST is an optional method (return no error if not found)
+ */
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status,
"While executing method _SST"));
}
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
}
}
+/*
+ * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
+ * up the NUMA heuristics which wants the local node to have a smaller
+ * distance than the others.
+ * Do some quick checks here and only use the SLIT if it passes.
+ */
+static __init int slit_valid(struct acpi_table_slit *slit)
+{
+ int i, j;
+ int d = slit->locality_count;
+ for (i = 0; i < d; i++) {
+ for (j = 0; j < d; j++) {
+ u8 val = slit->entry[d*i + j];
+ if (i == j) {
+ if (val != LOCAL_DISTANCE)
+ return 0;
+ } else if (val <= LOCAL_DISTANCE)
+ return 0;
+ }
+ }
+ return 1;
+}
+
static int __init acpi_parse_slit(struct acpi_table_header *table)
{
struct acpi_table_slit *slit;
- u32 localities;
if (!table)
return -EINVAL;
slit = (struct acpi_table_slit *)table;
- /* downcast just for %llu vs %lu for i386/ia64 */
- localities = (u32) slit->locality_count;
-
+ if (!slit_valid(slit)) {
+ printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
+ return -EINVAL;
+ }
acpi_numa_slit_init(slit);
return 0;
*/
if (ACPI_SUCCESS(status) &&
possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
- if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) {
+ if (walk_state->opcode == AML_UNLOAD_OP) {
/*
* acpi_ps_get_next_namestring has increased the AML pointer,
* so we need to restore the saved AML pointer for method call.
/* To support super_name arg of Unload */
- if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) {
+ if (walk_state->opcode == AML_UNLOAD_OP) {
status =
acpi_ps_get_next_namepath(walk_state,
parser_state, arg,
static void acpi_processor_notify(acpi_handle handle, u32 event, void *data);
static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
static int acpi_processor_handle_eject(struct acpi_processor *pr);
-extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
static const struct acpi_device_id processor_device_ids[] = {
return -EINVAL;
}
+ dev->cpu = pr->id;
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
dev->states[i].name[0] = '\0';
dev->states[i].desc[0] = '\0';
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
- int ret;
+ int ret = 0;
if (boot_option_idle_override)
return 0;
cpuidle_pause_and_lock();
cpuidle_disable_device(&pr->power.dev);
acpi_processor_get_power_info(pr);
- acpi_processor_setup_cpuidle(pr);
- ret = cpuidle_enable_device(&pr->power.dev);
+ if (pr->flags.power) {
+ acpi_processor_setup_cpuidle(pr);
+ ret = cpuidle_enable_device(&pr->power.dev);
+ }
cpuidle_resume_and_unlock();
return ret;
if (pr->flags.power) {
#ifdef CONFIG_CPU_IDLE
acpi_processor_setup_cpuidle(pr);
- pr->power.dev.cpu = pr->id;
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
#endif
return 0;
#ifdef CONFIG_CPU_IDLE
- if (pr->flags.power)
- cpuidle_unregister_device(&pr->power.dev);
+ cpuidle_unregister_device(&pr->power.dev);
#endif
pr->flags.power_setup_done = 0;
acpi_root_dir, &acpi_system_alarm_fops);
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ /*
+ * Disable the RTC event after installing RTC handler.
+ * Only when RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
#endif /* HAVE_ACPI_LEGACY_ALARM */
/* 'wakeup device' [R/W] */
container_of(bin_attr, struct acpi_table_attr, attr);
struct acpi_table_header *table_header = NULL;
acpi_status status;
- ssize_t ret_count = count;
status =
acpi_get_table(table_attr->name, table_attr->instance,
if (ACPI_FAILURE(status))
return -ENODEV;
- if (offset >= table_header->length) {
- ret_count = 0;
- goto end;
- }
-
- if (offset + ret_count > table_header->length)
- ret_count = table_header->length - offset;
-
- memcpy(buf, ((char *)table_header) + offset, ret_count);
-
- end:
- return ret_count;
+ return memory_read_from_buffer(buf, count, &offset,
+ table_header, table_header->length);
}
static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
}
}
- /* The table must be either an SSDT or a PSDT or an OEMx */
-
- if (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)&&
- !ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)&&
- strncmp(table_desc->pointer->signature, "OEM", 3)) {
- /* Check for a printable name */
- if (acpi_ut_valid_acpi_name(
- *(u32 *) table_desc->pointer->signature)) {
- ACPI_ERROR((AE_INFO, "Table has invalid signature "
- "[%4.4s], must be SSDT or PSDT",
- table_desc->pointer->signature));
- } else {
- ACPI_ERROR((AE_INFO, "Table has invalid signature "
- "(0x%8.8X), must be SSDT or PSDT",
- *(u32 *) table_desc->pointer->signature));
- }
- return_ACPI_STATUS(AE_BAD_SIGNATURE);
- }
+ /*
+ * Originally, we checked the table signature for "SSDT" or "PSDT" here.
+ * Next, we added support for OEMx tables, signature "OEM".
+ * Valid tables were encountered with a null signature, so we've just
+ * given up on validating the signature, since it seems to be a waste
+ * of code. The original code was removed (05/2008).
+ */
(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
acpi_tb_print_table_header(0, table);
if (no_auto_ssdt == 0) {
- printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"");
+ printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n");
}
}
if (flag & ACPI_TRIPS_CRITICAL) {
status = acpi_evaluate_integer(tz->device->handle,
"_CRT", NULL, &tz->trips.critical.temperature);
- if (ACPI_FAILURE(status)) {
+ /*
+ * Treat freezing temperatures as invalid as well; some
+ * BIOSes return really low values and cause reboots at startup.
+ * Below zero (Celcius) values clearly aren't right for sure..
+ * ... so lets discard those as invalid.
+ */
+ if (ACPI_FAILURE(status) ||
+ tz->trips.critical.temperature <= 2732) {
tz->trips.critical.flags.valid = 0;
ACPI_EXCEPTION((AE_INFO, status,
- "No critical threshold"));
+ "No or invalid critical threshold"));
return -ENODEV;
} else {
tz->trips.critical.flags.valid = 1;
va_start(args, format);
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+ va_end(args);
}
EXPORT_SYMBOL(acpi_ut_exception);
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
va_end(args);
- va_end(args);
}
void ACPI_INTERNAL_VAR_XFACE
status = acpi_video_bus_get_one_device(dev, video);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Cant attach device"));
continue;
}
}
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
+config HAVE_PATA_PLATFORM
+ bool
+ help
+ This is an internal configuration node for any machine that
+ uses pata-platform driver to enable the relevant driver in the
+ configuration structure without having to submit endless patches
+ to update the PATA_PLATFORM entry.
+
config PATA_PLATFORM
tristate "Generic platform device PATA support"
- depends on EMBEDDED || ARCH_RPC || PPC
+ depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems.
board_ahci_sb600 = 3,
board_ahci_mv = 4,
board_ahci_sb700 = 5,
+ board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
/* ap->flags bits */
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
.hardreset = ahci_p5wdh_hardreset,
};
+static struct ata_port_operations ahci_sb600_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_sb600_softreset,
+ .pmp_softreset = ahci_sb600_softreset,
+};
+
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
static const struct ata_port_info ahci_port_info[] = {
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAG_SECT255),
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
+ .port_ops = &ahci_sb600_ops,
},
/* board_ahci_mv */
{
},
/* board_ahci_sb700 */
{
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ /* board_ahci_mcp65 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ /* board_ahci_nopmp */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
/* NVIDIA */
- { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
cap &= ~HOST_CAP_NCQ;
}
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
}
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
+ port_map != 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
+ port_map, 1);
+ port_map = 1;
+ }
+
/*
* Temporary Marvell 6145 hack: PATA port presence
* is asserted through the standard AHCI port
return 0;
}
-static int ahci_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
- return ata_check_ready(status);
-}
-
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
- int pmp = sata_srst_pmp(link);
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
/* wait for link to become ready */
- rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
+ rc = ata_wait_after_reset(link, deadline, check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
return rc;
}
+static int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+
+ DPRINTK("ENTER\n");
+
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+
+static int ahci_sb600_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_sb600_check_ready);
+
+ /*
+ * Soft reset fails on some ATI chips with IPMS set when PMP
+ * is enabled but SATA HDD/ODD is connected to SATA port,
+ * do soft reset again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "failed due to HW bug, retry pmp=0\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info pi = ahci_port_info[ent->driver_data];
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
return -ENOMEM;
hpriv->flags |= (unsigned long)pi.private_data;
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
},
},
+ {
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
+ },
+ },
{
.ident = "TECRA M5",
.matches = {
}
/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
{
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
- int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
+ int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
unsigned int nbytes;
memset(qc->cdb, 0, dev->cdb_len);
ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
- if (!using_pio && ata_check_atapi_dma(qc))
+ if (!nodata && !using_pio && atapi_check_dma(qc))
using_pio = 1;
/* Some controller variants snoop this value for Packet
qc->tf.lbam = (nbytes & 0xFF);
qc->tf.lbah = (nbytes >> 8);
- if (using_pio || nodata) {
- /* no data, or PIO data xfer */
- if (nodata)
- qc->tf.protocol = ATAPI_PROT_NODATA;
- else
- qc->tf.protocol = ATAPI_PROT_PIO;
- } else {
+ if (nodata)
+ qc->tf.protocol = ATAPI_PROT_NODATA;
+ else if (using_pio)
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ else {
/* DMA data xfer */
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
+extern int atapi_check_dma(struct ata_queued_cmd *qc);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
goto out_port_free_dma_mem;
memset(pp->crpb, 0, MV_CRPB_Q_SZ);
+ /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+ ap->flags |= ATA_FLAG_AN;
/*
* For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
* For later hardware, we need one unique sg_tbl per NCQ tag.
if ((qc->tf.protocol != ATA_PROT_DMA) &&
(qc->tf.protocol != ATA_PROT_NCQ)) {
+ static int limit_warnings = 10;
+ /*
+ * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+ *
+ * Someday, we might implement special polling workarounds
+ * for these, but it all seems rather unnecessary since we
+ * normally use only DMA for commands which transfer more
+ * than a single block of data.
+ *
+ * Much of the time, this could just work regardless.
+ * So for now, just log the incident, and allow the attempt.
+ */
+ if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+ --limit_warnings;
+ ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
+ }
/*
* We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
#include "midway.h"
-#define KERNEL_OFFSET 0xC0000000 /* kernel 0x0 is at phys 0xC0000000 */
#define DEV_LABEL "eni"
#define UBR_BUFFER (128*1024) /* UBR buffer size */
/* initialize framer */
#ifdef CONFIG_ATM_HE_USE_SUNI
- suni_init(he_dev->atm_dev);
+ if (he_isMM(he_dev))
+ suni_init(he_dev->atm_dev);
if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->start)
he_dev->atm_dev->phy->start(he_dev->atm_dev);
#endif /* CONFIG_ATM_HE_USE_SUNI */
val = he_phy_get(he_dev->atm_dev, SUNI_TPOP_APM);
val = (val & ~SUNI_TPOP_APM_S) | (SUNI_TPOP_S_SDH << SUNI_TPOP_APM_S_SHIFT);
he_phy_put(he_dev->atm_dev, val, SUNI_TPOP_APM);
+ he_phy_put(he_dev->atm_dev, SUNI_TACP_IUCHP_CLP, SUNI_TACP_IUCHP);
}
/* 5.1.12 enable transmit and receive */
if (copy_from_user(®, arg,
sizeof(struct he_ioctl_reg)))
return -EFAULT;
-
+
spin_lock_irqsave(&he_dev->global_lock, flags);
switch (reg.type) {
case HE_REGTYPE_PCI:
+ if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) {
+ err = -EINVAL;
+ break;
+ }
+
reg.val = he_readl(he_dev, reg.addr);
break;
case HE_REGTYPE_RCM:
char prod_id[30];
char mac_addr[6];
- int media; /*
- * 0x26 = HE155 MM
- * 0x27 = HE622 MM
- * 0x46 = HE155 SM
- * 0x47 = HE622 SM
- */
-
+ int media;
unsigned int vcibits, vpibits;
unsigned int cells_per_row;
#define HE_DEV(dev) ((struct he_dev *) (dev)->dev_data)
#define he_is622(dev) ((dev)->media & 0x1)
+#define he_isMM(dev) ((dev)->media & 0x20)
#define HE_REGMAP_SIZE 0x100000
#define M_SN 0x3a /* integer */
#define MEDIA 0x3e /* integer */
#define HE155MM 0x26
-#define HE155SM 0x27
-#define HE622MM 0x46
+#define HE622MM 0x27
+#define HE155SM 0x46
#define HE622SM 0x47
#define MAC_ADDR 0x42 /* char[] */
error = suni_init(dev);
if (error)
goto err_free_rx;
- /*
- * Enable interrupt on loss of signal
- * SUNI_RSOP_CIE - 0x10
- * SUNI_RSOP_CIE_LOSE - 0x04
- */
- ia_phy_put(dev, ia_phy_get(dev, 0x10) | 0x04, 0x10);
-#ifndef MODULE
- error = dev->phy->start(dev);
- if (error)
- goto err_free_rx;
-#endif
+ if (dev->phy->start) {
+ error = dev->phy->start(dev);
+ if (error)
+ goto err_free_rx;
+ }
/* Get iadev->carrier_detect status */
IaFrontEndIntr(iadev);
}
IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev,
iadev->LineRate);)
+ pci_set_drvdata(pdev, dev);
+
ia_dev[iadev_count] = iadev;
_ia_dev[iadev_count] = dev;
iadev_count++;
iadev->next_board = ia_boards;
ia_boards = dev;
- pci_set_drvdata(pdev, dev);
-
return 0;
err_out_deregister_dev:
struct atm_dev *dev = pci_get_drvdata(pdev);
IADEV *iadev = INPH_IA_DEV(dev);
- ia_phy_put(dev, ia_phy_get(dev,0x10) & ~(0x4), 0x10);
+ /* Disable phy interrupts */
+ ia_phy_put(dev, ia_phy_get(dev, SUNI_RSOP_CIE) & ~(SUNI_RSOP_CIE_LOSE),
+ SUNI_RSOP_CIE);
udelay(1);
+ if (dev->phy && dev->phy->stop)
+ dev->phy->stop(dev);
+
/* De-register device */
free_irq(iadev->irq, dev);
iadev_count--;
/**
* dev_set_name - set a device name
* @dev: device
+ * @fmt: format string for the device's name
*/
int dev_set_name(struct device *dev, const char *fmt, ...)
{
#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500");
-MODULE_VERSION("3.6.14");
+ " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
+ " Smart Array G2 Series SAS/SATA Controllers");
+MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
{0x3215103C, "Smart Array E200i", &SA5_access, 120},
{0x3237103C, "Smart Array E500", &SA5_access, 512},
{0x323D103C, "Smart Array P700m", &SA5_access, 512},
+ {0x3241103C, "Smart Array P212", &SA5_access, 384},
+ {0x3243103C, "Smart Array P410", &SA5_access, 384},
+ {0x3245103C, "Smart Array P410i", &SA5_access, 384},
+ {0x3247103C, "Smart Array P411", &SA5_access, 384},
+ {0x3249103C, "Smart Array P812", &SA5_access, 384},
{0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
};
if RTC_LIB=n
config RTC
- tristate "Enhanced Real Time Clock Support"
+ tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
&& !ARM && !SUPERH && !S390 && !AVR32
---help---
non-periodic and/or periodic.
config HPET_RTC_IRQ
- bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
- default n
- depends on HPET
+ bool
+ default HPET_EMULATE_RTC
+ depends on RTC && HPET
help
If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It
is assumed the platform called hpet_alloc with the RTC IRQ values for
const void *aperture_sizes;
int num_aperture_sizes;
enum aper_size_type size_type;
- int cant_use_aperture;
- int needs_scratch_page;
+ bool cant_use_aperture;
+ bool needs_scratch_page;
const struct gatt_mask *masks;
int (*fetch_size)(void);
int (*configure)(void);
void agp_free_key(int key);
int agp_num_entries(void);
u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command);
-void agp_device_command(u32 command, int agp_v3);
+void agp_device_command(u32 command, bool agp_v3);
int agp_3_5_enable(struct agp_bridge_data *bridge);
void global_cache_flush(void);
void get_agp_version(struct agp_bridge_data *bridge);
agp->mode.bits.enable = 1;
agp->ops->configure(agp);
- agp_device_command(agp->mode.lw, 0);
+ agp_device_command(agp->mode.lw, false);
}
static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start,
.aperture_sizes = alpha_core_agp_sizes,
.num_aperture_sizes = 1,
.size_type = FIXED_APER_SIZE,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
.masks = NULL,
.fetch_size = alpha_core_agp_fetch_size,
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
/*CACHE_FLUSH(); */
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
.device_id = PCI_DEVICE_ID_ATI_RS300_200,
.chipset_name = "IGP9100/M",
},
+ {
+ .device_id = PCI_DEVICE_ID_ATI_RS350_133,
+ .chipset_name = "IGP9000/M",
+ },
{
.device_id = PCI_DEVICE_ID_ATI_RS350_200,
.chipset_name = "IGP9100/M",
err_out:
if (bridge->driver->needs_scratch_page) {
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_UNMAP);
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_FREE);
+ void *va = gart_to_virt(bridge->scratch_page_real);
+
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
}
if (got_gatt)
bridge->driver->free_gatt_table(bridge);
if (bridge->driver->agp_destroy_page &&
bridge->driver->needs_scratch_page) {
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_UNMAP);
- bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real),
- AGP_PAGE_DESTROY_FREE);
+ void *va = gart_to_virt(bridge->scratch_page_real);
+
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
+ bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
}
}
ret_val = -EINVAL;
goto ioctl_out;
}
- if ((agp_fe.backend_acquired != TRUE) &&
+ if ((agp_fe.backend_acquired != true) &&
(cmd != AGPIOC_ACQUIRE32)) {
ret_val = -EBUSY;
goto ioctl_out;
if (type != 0 || mem->type != 0)
return -EINVAL;
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
last_page = NULL;
.free_gatt_table = efficeon_free_gatt_table,
.insert_memory = efficeon_insert_memory,
.remove_memory = efficeon_remove_memory,
- .cant_use_aperture = 0, // 1 might be faster?
+ .cant_use_aperture = false, // true might be faster?
// Generic
.alloc_by_type = agp_generic_alloc_by_type,
if (agp_fe.current_controller == controller) {
agp_fe.current_controller = NULL;
- agp_fe.backend_acquired = FALSE;
+ agp_fe.backend_acquired = false;
agp_backend_release(agp_bridge);
}
kfree(controller);
}
agp_fe.current_controller = NULL;
- agp_fe.used_by_controller = FALSE;
+ agp_fe.used_by_controller = false;
agp_backend_release(agp_bridge);
}
mutex_lock(&(agp_fe.agp_mutex));
- if (agp_fe.backend_acquired != TRUE)
+ if (agp_fe.backend_acquired != true)
goto out_eperm;
if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags)))
atomic_inc(&agp_bridge->agp_in_use);
- agp_fe.backend_acquired = TRUE;
+ agp_fe.backend_acquired = true;
controller = agp_find_controller_by_pid(priv->my_pid);
controller = agp_create_controller(priv->my_pid);
if (controller == NULL) {
- agp_fe.backend_acquired = FALSE;
+ agp_fe.backend_acquired = false;
agp_backend_release(agp_bridge);
return -ENOMEM;
}
ret_val = -EINVAL;
goto ioctl_out;
}
- if ((agp_fe.backend_acquired != TRUE) &&
+ if ((agp_fe.backend_acquired != true) &&
(cmd != AGPIOC_ACQUIRE)) {
ret_val = -EBUSY;
goto ioctl_out;
void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
mem->memory = NULL;
- mem->vmalloc_flag = 0;
+ mem->vmalloc_flag = false;
if (size <= 2*PAGE_SIZE)
mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
if (mem->memory == NULL) {
mem->memory = vmalloc(size);
- mem->vmalloc_flag = 1;
+ mem->vmalloc_flag = true;
}
}
EXPORT_SYMBOL(agp_alloc_page_array);
if (curr == NULL)
return;
- if (curr->is_bound == TRUE)
+ if (curr->is_bound)
agp_unbind_memory(curr);
if (curr->type >= AGP_USER_TYPES) {
}
if (curr->page_count != 0) {
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP);
+ curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]);
+ curr->bridge->driver->agp_destroy_page((void *)curr->memory[i],
+ AGP_PAGE_DESTROY_UNMAP);
}
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE);
+ curr->bridge->driver->agp_destroy_page((void *)curr->memory[i],
+ AGP_PAGE_DESTROY_FREE);
}
}
agp_free_key(curr->key);
if (curr == NULL)
return -EINVAL;
- if (curr->is_bound == TRUE) {
+ if (curr->is_bound) {
printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
return -EINVAL;
}
- if (curr->is_flushed == FALSE) {
+ if (!curr->is_flushed) {
curr->bridge->driver->cache_flush();
- curr->is_flushed = TRUE;
+ curr->is_flushed = true;
}
ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type);
if (ret_val != 0)
return ret_val;
- curr->is_bound = TRUE;
+ curr->is_bound = true;
curr->pg_start = pg_start;
return 0;
}
if (curr == NULL)
return -EINVAL;
- if (curr->is_bound != TRUE) {
+ if (!curr->is_bound) {
printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
return -EINVAL;
}
if (ret_val != 0)
return ret_val;
- curr->is_bound = FALSE;
+ curr->is_bound = false;
curr->pg_start = 0;
return 0;
}
EXPORT_SYMBOL(agp_collect_device_status);
-void agp_device_command(u32 bridge_agpstat, int agp_v3)
+void agp_device_command(u32 bridge_agpstat, bool agp_v3)
{
struct pci_dev *device = NULL;
int mode;
/* If we have 3.5, we can do the isoch stuff. */
if (bridge->minor_version >= 5)
agp_3_5_enable(bridge);
- agp_device_command(bridge_agpstat, TRUE);
+ agp_device_command(bridge_agpstat, true);
return;
} else {
/* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/
}
/* AGP v<3 */
- agp_device_command(bridge_agpstat, FALSE);
+ agp_device_command(bridge_agpstat, false);
}
EXPORT_SYMBOL(agp_generic_enable);
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
bridge->driver->cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __init
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __devinit agp_intel_i460_probe(struct pci_dev *pdev,
#define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2
#define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40
#define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42
+#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00
+#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02
+#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10
+#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12
+#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20
+#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22
/* cover 915 and 945 variants */
#define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB)
+#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB)
+
extern int agp_memory_reserved;
#define I915_PTEADDR 0x1C
#define I915_GMCH_GMS_STOLEN_48M (0x6 << 4)
#define I915_GMCH_GMS_STOLEN_64M (0x7 << 4)
-#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)
-#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4)
+#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)
+#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4)
+#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4)
+#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4)
+#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4)
+#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
+
#define I915_IFPADDR 0x60
/* Intel 965G registers */
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
if (curr->page_count == 4)
i8xx_destroy_pages(gart_to_virt(curr->memory[0]));
else {
- agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
+ void *va = gart_to_virt(curr->memory[0]);
+
+ agp_bridge->driver->agp_destroy_page(va,
AGP_PAGE_DESTROY_UNMAP);
- agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]),
+ agp_bridge->driver->agp_destroy_page(va,
AGP_PAGE_DESTROY_FREE);
}
agp_free_page_array(curr);
size = 512;
}
size += 4;
+ } else if (IS_G4X) {
+ /* On 4 series hardware, GTT stolen is separate from graphics
+ * stolen, ignore it in stolen gtt entries counting */
+ size = 0;
} else {
/* On previous hardware, the GTT size was just what was
* required to map the aperture.
break;
case I915_GMCH_GMS_STOLEN_48M:
/* Check it's really I915G */
- if (IS_I915 || IS_I965 || IS_G33)
+ if (IS_I915 || IS_I965 || IS_G33 || IS_G4X)
gtt_entries = MB(48) - KB(size);
else
gtt_entries = 0;
break;
case I915_GMCH_GMS_STOLEN_64M:
/* Check it's really I915G */
- if (IS_I915 || IS_I965 || IS_G33)
+ if (IS_I915 || IS_I965 || IS_G33 || IS_G4X)
gtt_entries = MB(64) - KB(size);
else
gtt_entries = 0;
break;
case G33_GMCH_GMS_STOLEN_128M:
- if (IS_G33)
+ if (IS_G33 || IS_I965 || IS_G4X)
gtt_entries = MB(128) - KB(size);
else
gtt_entries = 0;
break;
case G33_GMCH_GMS_STOLEN_256M:
- if (IS_G33)
+ if (IS_G33 || IS_I965 || IS_G4X)
gtt_entries = MB(256) - KB(size);
else
gtt_entries = 0;
break;
+ case INTEL_GMCH_GMS_STOLEN_96M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(96) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_160M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(160) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_224M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(224) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
+ case INTEL_GMCH_GMS_STOLEN_352M:
+ if (IS_I965 || IS_G4X)
+ gtt_entries = MB(352) - KB(size);
+ else
+ gtt_entries = 0;
+ break;
default:
gtt_entries = 0;
break;
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
intel_private.ifp_resource.flags = IORESOURCE_MEM;
/* Setup chipset flush for 915 */
- if (IS_I965 || IS_G33) {
+ if (IS_I965 || IS_G33 || IS_G4X) {
intel_i965_g33_setup_chipset_flush();
} else {
intel_i915_setup_chipset_flush();
out:
ret = 0;
out_err:
- mem->is_flushed = 1;
+ mem->is_flushed = true;
return ret;
}
return addr | bridge->driver->masks[type].mask;
}
+static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
+{
+ switch (agp_bridge->dev->device) {
+ case PCI_DEVICE_ID_INTEL_IGD_HB:
+ case PCI_DEVICE_ID_INTEL_IGD_E_HB:
+ case PCI_DEVICE_ID_INTEL_Q45_HB:
+ case PCI_DEVICE_ID_INTEL_G45_HB:
+ *gtt_offset = *gtt_size = MB(2);
+ break;
+ default:
+ *gtt_offset = *gtt_size = KB(512);
+ }
+}
+
/* The intel i965 automatically initializes the agp aperture during POST.
* Use the memory already set aside for in the GTT.
*/
static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge)
{
- int page_order;
- struct aper_size_info_fixed *size;
- int num_entries;
- u32 temp;
- int gtt_offset, gtt_size;
+ int page_order;
+ struct aper_size_info_fixed *size;
+ int num_entries;
+ u32 temp;
+ int gtt_offset, gtt_size;
- size = agp_bridge->current_size;
- page_order = size->page_order;
- num_entries = size->num_entries;
- agp_bridge->gatt_table_real = NULL;
+ size = agp_bridge->current_size;
+ page_order = size->page_order;
+ num_entries = size->num_entries;
+ agp_bridge->gatt_table_real = NULL;
- pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
+ pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp);
- temp &= 0xfff00000;
+ temp &= 0xfff00000;
- if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
- gtt_offset = gtt_size = MB(2);
- else
- gtt_offset = gtt_size = KB(512);
+ intel_i965_get_gtt_range(>t_offset, >t_size);
- intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size);
+ intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size);
- if (!intel_private.gtt)
- return -ENOMEM;
+ if (!intel_private.gtt)
+ return -ENOMEM;
- intel_private.registers = ioremap(temp, 128 * 4096);
- if (!intel_private.registers) {
+ intel_private.registers = ioremap(temp, 128 * 4096);
+ if (!intel_private.registers) {
iounmap(intel_private.gtt);
return -ENOMEM;
}
- temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
- global_cache_flush(); /* FIXME: ? */
+ temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
+ global_cache_flush(); /* FIXME: ? */
- /* we have to call this as early as possible after the MMIO base address is known */
- intel_i830_init_gtt_entries();
+ /* we have to call this as early as possible after the MMIO base address is known */
+ intel_i830_init_gtt_entries();
- agp_bridge->gatt_table = NULL;
+ agp_bridge->gatt_table = NULL;
- agp_bridge->gatt_bus_addr = temp;
+ agp_bridge->gatt_bus_addr = temp;
- return 0;
+ return 0;
}
.aperture_sizes = intel_i810_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 2,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i810_configure,
.fetch_size = intel_i810_fetch_size,
.cleanup = intel_i810_cleanup,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = agp_generic_type_to_mask_type,
+ .agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
static const struct agp_bridge_driver intel_830_driver = {
.aperture_sizes = intel_i830_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i830_configure,
.fetch_size = intel_i830_fetch_size,
.cleanup = intel_i830_cleanup,
.aperture_sizes = intel_i830_sizes,
.size_type = FIXED_APER_SIZE,
.num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
+ .needs_scratch_page = true,
.configure = intel_i915_configure,
.fetch_size = intel_i9xx_fetch_size,
.cleanup = intel_i915_cleanup,
};
static const struct agp_bridge_driver intel_i965_driver = {
- .owner = THIS_MODULE,
- .aperture_sizes = intel_i830_sizes,
- .size_type = FIXED_APER_SIZE,
- .num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
- .configure = intel_i915_configure,
- .fetch_size = intel_i9xx_fetch_size,
- .cleanup = intel_i915_cleanup,
- .tlb_flush = intel_i810_tlbflush,
- .mask_memory = intel_i965_mask_memory,
- .masks = intel_i810_masks,
- .agp_enable = intel_i810_agp_enable,
- .cache_flush = global_cache_flush,
- .create_gatt_table = intel_i965_create_gatt_table,
- .free_gatt_table = intel_i830_free_gatt_table,
- .insert_memory = intel_i915_insert_entries,
- .remove_memory = intel_i915_remove_entries,
- .alloc_by_type = intel_i830_alloc_by_type,
- .free_by_type = intel_i810_free_by_type,
- .agp_alloc_page = agp_generic_alloc_page,
- .agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = intel_i830_type_to_mask_type,
+ .owner = THIS_MODULE,
+ .aperture_sizes = intel_i830_sizes,
+ .size_type = FIXED_APER_SIZE,
+ .num_aperture_sizes = 4,
+ .needs_scratch_page = true,
+ .configure = intel_i915_configure,
+ .fetch_size = intel_i9xx_fetch_size,
+ .cleanup = intel_i915_cleanup,
+ .tlb_flush = intel_i810_tlbflush,
+ .mask_memory = intel_i965_mask_memory,
+ .masks = intel_i810_masks,
+ .agp_enable = intel_i810_agp_enable,
+ .cache_flush = global_cache_flush,
+ .create_gatt_table = intel_i965_create_gatt_table,
+ .free_gatt_table = intel_i830_free_gatt_table,
+ .insert_memory = intel_i915_insert_entries,
+ .remove_memory = intel_i915_remove_entries,
+ .alloc_by_type = intel_i830_alloc_by_type,
+ .free_by_type = intel_i810_free_by_type,
+ .agp_alloc_page = agp_generic_alloc_page,
+ .agp_destroy_page = agp_generic_destroy_page,
+ .agp_type_to_mask_type = intel_i830_type_to_mask_type,
.chipset_flush = intel_i915_chipset_flush,
};
};
static const struct agp_bridge_driver intel_g33_driver = {
- .owner = THIS_MODULE,
- .aperture_sizes = intel_i830_sizes,
- .size_type = FIXED_APER_SIZE,
- .num_aperture_sizes = 4,
- .needs_scratch_page = TRUE,
- .configure = intel_i915_configure,
- .fetch_size = intel_i9xx_fetch_size,
- .cleanup = intel_i915_cleanup,
- .tlb_flush = intel_i810_tlbflush,
- .mask_memory = intel_i965_mask_memory,
- .masks = intel_i810_masks,
- .agp_enable = intel_i810_agp_enable,
- .cache_flush = global_cache_flush,
- .create_gatt_table = intel_i915_create_gatt_table,
- .free_gatt_table = intel_i830_free_gatt_table,
- .insert_memory = intel_i915_insert_entries,
- .remove_memory = intel_i915_remove_entries,
- .alloc_by_type = intel_i830_alloc_by_type,
- .free_by_type = intel_i810_free_by_type,
- .agp_alloc_page = agp_generic_alloc_page,
- .agp_destroy_page = agp_generic_destroy_page,
- .agp_type_to_mask_type = intel_i830_type_to_mask_type,
+ .owner = THIS_MODULE,
+ .aperture_sizes = intel_i830_sizes,
+ .size_type = FIXED_APER_SIZE,
+ .num_aperture_sizes = 4,
+ .needs_scratch_page = true,
+ .configure = intel_i915_configure,
+ .fetch_size = intel_i9xx_fetch_size,
+ .cleanup = intel_i915_cleanup,
+ .tlb_flush = intel_i810_tlbflush,
+ .mask_memory = intel_i965_mask_memory,
+ .masks = intel_i810_masks,
+ .agp_enable = intel_i810_agp_enable,
+ .cache_flush = global_cache_flush,
+ .create_gatt_table = intel_i915_create_gatt_table,
+ .free_gatt_table = intel_i830_free_gatt_table,
+ .insert_memory = intel_i915_insert_entries,
+ .remove_memory = intel_i915_remove_entries,
+ .alloc_by_type = intel_i830_alloc_by_type,
+ .free_by_type = intel_i810_free_by_type,
+ .agp_alloc_page = agp_generic_alloc_page,
+ .agp_destroy_page = agp_generic_destroy_page,
+ .agp_type_to_mask_type = intel_i830_type_to_mask_type,
.chipset_flush = intel_i915_chipset_flush,
};
NULL, &intel_g33_driver },
{ PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
"Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
+ "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
+ "Q45/Q43", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0,
+ "G45/G43", NULL, &intel_i965_driver },
{ 0, 0, 0, NULL, NULL, NULL }
};
ID(PCI_DEVICE_ID_INTEL_Q35_HB),
ID(PCI_DEVICE_ID_INTEL_Q33_HB),
ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+ ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
+ ID(PCI_DEVICE_ID_INTEL_Q45_HB),
+ ID(PCI_DEVICE_ID_INTEL_G45_HB),
{ }
};
return -EBUSY;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
writel(agp_bridge->driver->mask_memory(agp_bridge,
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
static int __init
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
bridge->driver->cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
.agp_alloc_page = sgi_tioca_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
- .needs_scratch_page = 0,
+ .cant_use_aperture = true,
+ .needs_scratch_page = false,
.num_aperture_sizes = 1,
};
j++;
}
- if (mem->is_flushed == FALSE) {
+ if (!mem->is_flushed) {
global_cache_flush();
- mem->is_flushed = TRUE;
+ mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
bridge->capndx + PCI_AGP_COMMAND,
command);
- agp_device_command(command, 0);
+ agp_device_command(command, false);
}
static const struct agp_bridge_driver sworks_driver = {
if (uninorth_rev >= 0x30) {
/* This is an AGP V3 */
- agp_device_command(command, (status & AGPSTAT_MODE_3_0));
+ agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0);
} else {
/* AGP V2 */
- agp_device_command(command, 0);
+ agp_device_command(command, false);
}
uninorth_tlbflush(NULL);
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
+ .cant_use_aperture = true,
};
const struct agp_bridge_driver u3_agp_driver = {
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .cant_use_aperture = 1,
- .needs_scratch_page = 1,
+ .cant_use_aperture = true,
+ .needs_scratch_page = true,
};
static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
.device_id = PCI_DEVICE_ID_VIA_VT3324,
.chipset_name = "CX700",
},
- /* VT3336 */
+ /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique
+ * architecture, the AGP resource and behavior are different from
+ * the traditional AGP which resides only in chipset. AGP is used
+ * by 3D driver which wasn't available for the VT3336 and VT3364
+ * generation until now. Unfortunately, by testing, VT3364 works
+ * but VT3336 doesn't. - explaination from via, just leave this as
+ * as a placeholder to avoid future patches adding it back in.
+ */
+#if 0
{
.device_id = PCI_DEVICE_ID_VIA_VT3336,
.chipset_name = "VT3336",
},
+#endif
/* P4M890 */
{
.device_id = PCI_DEVICE_ID_VIA_P4M890,
ID(PCI_DEVICE_ID_VIA_3296_0),
ID(PCI_DEVICE_ID_VIA_P4M800CE),
ID(PCI_DEVICE_ID_VIA_VT3324),
- ID(PCI_DEVICE_ID_VIA_VT3336),
ID(PCI_DEVICE_ID_VIA_P4M890),
+ ID(PCI_DEVICE_ID_VIA_VT3364),
{ }
};
for (i = 0; i < pages; i++) {
if (!entry->busaddr[i])
break;
- pci_unmap_single(dev->pdev, entry->busaddr[i],
+ pci_unmap_page(dev->pdev, entry->busaddr[i],
PAGE_SIZE, PCI_DMA_TODEVICE);
}
for (i = 0; i < pages; i++) {
/* we need to support large memory configurations */
- entry->busaddr[i] = pci_map_single(dev->pdev,
- page_address(entry->
- pagelist[i]),
- PAGE_SIZE, PCI_DMA_TODEVICE);
+ entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i],
+ 0, PAGE_SIZE, PCI_DMA_TODEVICE);
if (entry->busaddr[i] == 0) {
DRM_ERROR("unable to map PCIGART pages!\n");
drm_ati_pcigart_cleanup(dev, gart_info);
#define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding)
#define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding)
-#define DRM_IOCTL_SG_ALLOC DRM_IOW( 0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather)
#define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather)
#define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank)
if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) &&
(nr < DRM_COMMAND_BASE + dev->driver->num_ioctls))
ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
- else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE))
+ else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) {
ioctl = &drm_ioctls[nr];
- else
+ cmd = ioctl->cmd;
+ } else
goto err_i1;
+ /* Do not trust userspace, use our own definition */
func = ioctl->func;
/* is there a local override? */
if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl)
func = dev->driver->dma_ioctl;
-
if (!func) {
DRM_DEBUG("no function\n");
retcode = -EINVAL;
{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
- {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
- {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
- {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+ {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
return -1;
+ pci_set_master(dev->pdev);
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
(dev)->pci_device == 0x29A2 || \
(dev)->pci_device == 0x2A02 || \
(dev)->pci_device == 0x2A12 || \
- (dev)->pci_device == 0x2A42)
+ (dev)->pci_device == 0x2A42 || \
+ (dev)->pci_device == 0x2E02 || \
+ (dev)->pci_device == 0x2E12 || \
+ (dev)->pci_device == 0x2E22)
#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
+ (dev)->pci_device == 0x2E12 || \
+ (dev)->pci_device == 0x2E22)
+
#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
(dev)->pci_device == 0x29B2 || \
(dev)->pci_device == 0x29D2)
#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
ADD_RANGE(R300_RE_CULL_CNTL, 1);
ADD_RANGE(0x42C0, 2);
ADD_RANGE(R300_RS_CNTL_0, 2);
- ADD_RANGE(R300_RS_INTERP_0, 8);
- ADD_RANGE(R300_RS_ROUTE_0, 8);
- ADD_RANGE(0x43A4, 2);
+
+ ADD_RANGE(R300_SC_HYPERZ, 2);
ADD_RANGE(0x43E8, 1);
- ADD_RANGE(R300_PFS_CNTL_0, 3);
- ADD_RANGE(R300_PFS_NODE_0, 4);
- ADD_RANGE(R300_PFS_TEXI_0, 64);
+
ADD_RANGE(0x46A4, 5);
- ADD_RANGE(R300_PFS_INSTR0_0, 64);
- ADD_RANGE(R300_PFS_INSTR1_0, 64);
- ADD_RANGE(R300_PFS_INSTR2_0, 64);
- ADD_RANGE(R300_PFS_INSTR3_0, 64);
+
ADD_RANGE(R300_RE_FOG_STATE, 1);
ADD_RANGE(R300_FOG_COLOR_R, 3);
ADD_RANGE(R300_PP_ALPHA_TEST, 2);
ADD_RANGE(0x4E50, 9);
ADD_RANGE(0x4E88, 1);
ADD_RANGE(0x4EA0, 2);
- ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
- ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4);
- ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
- ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
- ADD_RANGE(0x4F28, 1);
- ADD_RANGE(0x4F30, 2);
- ADD_RANGE(0x4F44, 1);
- ADD_RANGE(0x4F54, 1);
+ ADD_RANGE(R300_ZB_CNTL, 3);
+ ADD_RANGE(R300_ZB_FORMAT, 4);
+ ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */
+ ADD_RANGE(R300_ZB_DEPTHPITCH, 1);
+ ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1);
+ ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13);
ADD_RANGE(R300_TX_FILTER_0, 16);
ADD_RANGE(R300_TX_FILTER1_0, 16);
ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
/* Sporadic registers used as primitives are emitted */
- ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1);
+ ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1);
ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
- ADD_RANGE(0x4074, 16);
+ ADD_RANGE(R500_VAP_INDEX_OFFSET, 1);
+ ADD_RANGE(R500_US_CONFIG, 2);
+ ADD_RANGE(R500_US_CODE_ADDR, 3);
+ ADD_RANGE(R500_US_FC_CTRL, 1);
+ ADD_RANGE(R500_RS_IP_0, 16);
+ ADD_RANGE(R500_RS_INST_0, 16);
+ ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2);
+ ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2);
+ ADD_RANGE(R500_ZB_FIFO_SIZE, 2);
+ } else {
+ ADD_RANGE(R300_PFS_CNTL_0, 3);
+ ADD_RANGE(R300_PFS_NODE_0, 4);
+ ADD_RANGE(R300_PFS_TEXI_0, 64);
+ ADD_RANGE(R300_PFS_INSTR0_0, 64);
+ ADD_RANGE(R300_PFS_INSTR1_0, 64);
+ ADD_RANGE(R300_PFS_INSTR2_0, 64);
+ ADD_RANGE(R300_PFS_INSTR3_0, 64);
+ ADD_RANGE(R300_RS_INTERP_0, 8);
+ ADD_RANGE(R300_RS_ROUTE_0, 8);
+
}
}
BEGIN_RING(6);
OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
- OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03);
+ OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
+ OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
+ R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
OUT_RING(0x0);
ADVANCE_RING();
return 0;
}
+/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv,
+ drm_radeon_kcmd_buffer_t *cmdbuf,
+ drm_r300_cmd_header_t header)
+{
+ int sz;
+ int addr;
+ int type;
+ int clamp;
+ int stride;
+ RING_LOCALS;
+
+ sz = header.r500fp.count;
+ /* address is 9 bits 0 - 8, bit 1 of flags is part of address */
+ addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo;
+
+ type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE);
+ clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP);
+
+ addr |= (type << 16);
+ addr |= (clamp << 17);
+
+ stride = type ? 4 : 6;
+
+ DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type);
+ if (!sz)
+ return 0;
+ if (sz * stride * 4 > cmdbuf->bufsz)
+ return -EINVAL;
+
+ BEGIN_RING(3 + sz * stride);
+ OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr);
+ OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1));
+ OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride);
+
+ ADVANCE_RING();
+
+ cmdbuf->buf += sz * stride * 4;
+ cmdbuf->bufsz -= sz * stride * 4;
+
+ return 0;
+}
+
+
/**
* Parses and validates a user-supplied command buffer and emits appropriate
* commands on the DMA ring buffer.
}
break;
+ case R300_CMD_R500FP:
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+ DRM_ERROR("Calling r500 command on r300 card\n");
+ ret = -EINVAL;
+ goto cleanup;
+ }
+ DRM_DEBUG("R300_CMD_R500FP\n");
+ ret = r300_emit_r500fp(dev_priv, cmdbuf, header);
+ if (ret) {
+ DRM_ERROR("r300_emit_r500fp failed\n");
+ goto cleanup;
+ }
+ break;
default:
DRM_ERROR("bad cmd_type %i at %p\n",
header.header.cmd_type,
# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11)
/* END: Rasterization / Interpolators - many guesses */
+/* Hierarchical Z Enable */
+#define R300_SC_HYPERZ 0x43a4
+# define R300_SC_HYPERZ_DISABLE (0 << 0)
+# define R300_SC_HYPERZ_ENABLE (1 << 0)
+# define R300_SC_HYPERZ_MIN (0 << 1)
+# define R300_SC_HYPERZ_MAX (1 << 1)
+# define R300_SC_HYPERZ_ADJ_256 (0 << 2)
+# define R300_SC_HYPERZ_ADJ_128 (1 << 2)
+# define R300_SC_HYPERZ_ADJ_64 (2 << 2)
+# define R300_SC_HYPERZ_ADJ_32 (3 << 2)
+# define R300_SC_HYPERZ_ADJ_16 (4 << 2)
+# define R300_SC_HYPERZ_ADJ_8 (5 << 2)
+# define R300_SC_HYPERZ_ADJ_4 (6 << 2)
+# define R300_SC_HYPERZ_ADJ_2 (7 << 2)
+# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5)
+# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5)
+# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
+# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6)
+
+#define R300_SC_EDGERULE 0x43a8
+
/* BEGIN: Scissors and cliprects */
/* There are four clipping rectangles. Their corner coordinates are inclusive.
/* Guess by Vladimir.
* Set to 0A before 3D operations, set to 02 afterwards.
*/
-#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C
+/*#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C*/
# define R300_RB3D_DSTCACHE_UNKNOWN_02 0x00000002
# define R300_RB3D_DSTCACHE_UNKNOWN_0A 0x0000000A
* for this.
* Bit (1<<8) is the "test" bit. so plain write is 6 - vd
*/
-#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00
-# define R300_RB3D_Z_DISABLED_1 0x00000010
-# define R300_RB3D_Z_DISABLED_2 0x00000014
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-
-# define R300_RB3D_Z_TEST 0x00000012
-# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016
-# define R300_RB3D_Z_WRITE_ONLY 0x00000006
-# define R300_RB3D_STENCIL_ENABLE 0x00000001
-
-#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04
+#define R300_ZB_CNTL 0x4F00
+# define R300_STENCIL_ENABLE (1 << 0)
+# define R300_Z_ENABLE (1 << 1)
+# define R300_Z_WRITE_ENABLE (1 << 2)
+# define R300_Z_SIGNED_COMPARE (1 << 3)
+# define R300_STENCIL_FRONT_BACK (1 << 4)
+
+#define R300_ZB_ZSTENCILCNTL 0x4f04
/* functions */
# define R300_ZS_NEVER 0
# define R300_ZS_LESS 1
# define R300_ZS_INVERT 5
# define R300_ZS_INCR_WRAP 6
# define R300_ZS_DECR_WRAP 7
+# define R300_Z_FUNC_SHIFT 0
/* front and back refer to operations done for front
and back faces, i.e. separate stencil function support */
-# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0
-# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3
-# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6
-# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9
-# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12
-# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15
-# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18
-# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21
-# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24
-
-#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08
-# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0
-# define R300_RB3D_ZS2_STENCIL_MASK 0xFF
-# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8
-# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16
+# define R300_S_FRONT_FUNC_SHIFT 3
+# define R300_S_FRONT_SFAIL_OP_SHIFT 6
+# define R300_S_FRONT_ZPASS_OP_SHIFT 9
+# define R300_S_FRONT_ZFAIL_OP_SHIFT 12
+# define R300_S_BACK_FUNC_SHIFT 15
+# define R300_S_BACK_SFAIL_OP_SHIFT 18
+# define R300_S_BACK_ZPASS_OP_SHIFT 21
+# define R300_S_BACK_ZFAIL_OP_SHIFT 24
+
+#define R300_ZB_STENCILREFMASK 0x4f08
+# define R300_STENCILREF_SHIFT 0
+# define R300_STENCILREF_MASK 0x000000ff
+# define R300_STENCILMASK_SHIFT 8
+# define R300_STENCILMASK_MASK 0x0000ff00
+# define R300_STENCILWRITEMASK_SHIFT 16
+# define R300_STENCILWRITEMASK_MASK 0x00ff0000
/* gap */
-#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10
-# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0)
-# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0)
- /* 16 bit format or some aditional bit ? */
-# define R300_DEPTH_FORMAT_UNK32 (32 << 0)
+#define R300_ZB_FORMAT 0x4f10
+# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0)
+# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0)
+# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0)
+/* reserved up to (15 << 0) */
+# define R300_INVERT_13E3_LEADING_ONES (0 << 4)
+# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4)
-#define R300_RB3D_EARLY_Z 0x4F14
-# define R300_EARLY_Z_DISABLE (0 << 0)
-# define R300_EARLY_Z_ENABLE (1 << 0)
+#define R300_ZB_ZTOP 0x4F14
+# define R300_ZTOP_DISABLE (0 << 0)
+# define R300_ZTOP_ENABLE (1 << 0)
/* gap */
-#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */
-# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1
-# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31)
+# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31)
+
+#define R300_ZB_BW_CNTL 0x4f1c
+# define R300_HIZ_DISABLE (0 << 0)
+# define R300_HIZ_ENABLE (1 << 0)
+# define R300_HIZ_MIN (0 << 1)
+# define R300_HIZ_MAX (1 << 1)
+# define R300_FAST_FILL_DISABLE (0 << 2)
+# define R300_FAST_FILL_ENABLE (1 << 2)
+# define R300_RD_COMP_DISABLE (0 << 3)
+# define R300_RD_COMP_ENABLE (1 << 3)
+# define R300_WR_COMP_DISABLE (0 << 4)
+# define R300_WR_COMP_ENABLE (1 << 4)
+# define R300_ZB_CB_CLEAR_RMW (0 << 5)
+# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5)
+# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6)
+# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6)
+
+# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7)
+# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7)
+# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8)
+# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8)
+
+# define R500_BMASK_ENABLE (0 << 10)
+# define R500_BMASK_DISABLE (1 << 10)
+# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11)
+# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11)
+# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12)
+# define R500_HIZ_FP_EXP_BITS_1 (1 << 12)
+# define R500_HIZ_FP_EXP_BITS_2 (2 << 12)
+# define R500_HIZ_FP_EXP_BITS_3 (3 << 12)
+# define R500_HIZ_FP_EXP_BITS_4 (4 << 12)
+# define R500_HIZ_FP_EXP_BITS_5 (5 << 12)
+# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15)
+# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16)
+# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17)
+# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17)
+# define R500_PEQ_PACKING_DISABLE (0 << 18)
+# define R500_PEQ_PACKING_ENABLE (1 << 18)
+# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18)
+# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18)
+
/* gap */
-#define R300_RB3D_DEPTHOFFSET 0x4F20
-#define R300_RB3D_DEPTHPITCH 0x4F24
-# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */
-# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */
-# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */
-# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */
-# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */
-# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */
+/* Z Buffer Address Offset.
+ * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
+ */
+#define R300_ZB_DEPTHOFFSET 0x4f20
+
+/* Z Buffer Pitch and Endian Control */
+#define R300_ZB_DEPTHPITCH 0x4f24
+# define R300_DEPTHPITCH_MASK 0x00003FFC
+# define R300_DEPTHMACROTILE_DISABLE (0 << 16)
+# define R300_DEPTHMACROTILE_ENABLE (1 << 16)
+# define R300_DEPTHMICROTILE_LINEAR (0 << 17)
+# define R300_DEPTHMICROTILE_TILED (1 << 17)
+# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+# define R300_DEPTHENDIAN_NO_SWAP (0 << 18)
+# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18)
+# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18)
+# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+
+/* Z Buffer Clear Value */
+#define R300_ZB_DEPTHCLEARVALUE 0x4f28
+
+#define R300_ZB_ZMASK_OFFSET 0x4f30
+#define R300_ZB_ZMASK_PITCH 0x4f34
+#define R300_ZB_ZMASK_WRINDEX 0x4f38
+#define R300_ZB_ZMASK_DWORD 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX 0x4f40
+
+/* Hierarchical Z Memory Offset */
+#define R300_ZB_HIZ_OFFSET 0x4f44
+
+/* Hierarchical Z Write Index */
+#define R300_ZB_HIZ_WRINDEX 0x4f48
+
+/* Hierarchical Z Data */
+#define R300_ZB_HIZ_DWORD 0x4f4c
+
+/* Hierarchical Z Read Index */
+#define R300_ZB_HIZ_RDINDEX 0x4f50
+
+/* Hierarchical Z Pitch */
+#define R300_ZB_HIZ_PITCH 0x4f54
+
+/* Z Buffer Z Pass Counter Data */
+#define R300_ZB_ZPASS_DATA 0x4f58
+
+/* Z Buffer Z Pass Counter Address */
+#define R300_ZB_ZPASS_ADDR 0x4f5c
+
+/* Depth buffer X and Y coordinate offset */
+#define R300_ZB_DEPTHXY_OFFSET 0x4f60
+# define R300_DEPTHX_OFFSET_SHIFT 1
+# define R300_DEPTHX_OFFSET_MASK 0x000007FE
+# define R300_DEPTHY_OFFSET_SHIFT 17
+# define R300_DEPTHY_OFFSET_MASK 0x07FE0000
+
+/* Sets the fifo sizes */
+#define R500_ZB_FIFO_SIZE 0x4fd0
+# define R500_OP_FIFO_SIZE_FULL (0 << 0)
+# define R500_OP_FIFO_SIZE_HALF (1 << 0)
+# define R500_OP_FIFO_SIZE_QUATER (2 << 0)
+# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0)
+
+/* Stencil Reference Value and Mask for backfacing quads */
+/* R300_ZB_STENCILREFMASK handles front face */
+#define R500_ZB_STENCILREFMASK_BF 0x4fd4
+# define R500_STENCILREF_SHIFT 0
+# define R500_STENCILREF_MASK 0x000000ff
+# define R500_STENCILMASK_SHIFT 8
+# define R500_STENCILMASK_MASK 0x0000ff00
+# define R500_STENCILWRITEMASK_SHIFT 16
+# define R500_STENCILWRITEMASK_MASK 0x00ff0000
/* BEGIN: Vertex program instruction set */
*/
#define R300_CP_CMD_BITBLT_MULTI 0xC0009B00
+#define R500_VAP_INDEX_OFFSET 0x208c
+
+#define R500_GA_US_VECTOR_INDEX 0x4250
+#define R500_GA_US_VECTOR_DATA 0x4254
+
+#define R500_RS_IP_0 0x4074
+#define R500_RS_INST_0 0x4320
+
+#define R500_US_CONFIG 0x4600
+
+#define R500_US_FC_CTRL 0x4624
+#define R500_US_CODE_ADDR 0x4630
+
+#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46c0
+#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8
+
#endif /* _R300_REG_H */
/*
* Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2007 Advanced Micro Devices, Inc.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
#include "radeon_drv.h"
#include "r300_reg.h"
+#include "radeon_microcode.h"
+
#define RADEON_FIFO_DEBUG 0
static int radeon_do_cleanup_cp(struct drm_device * dev);
-/* CP microcode (from ATI) */
-static const u32 R200_cp_microcode[][2] = {
- {0x21007000, 0000000000},
- {0x20007000, 0000000000},
- {0x000000ab, 0x00000004},
- {0x000000af, 0x00000004},
- {0x66544a49, 0000000000},
- {0x49494174, 0000000000},
- {0x54517d83, 0000000000},
- {0x498d8b64, 0000000000},
- {0x49494949, 0000000000},
- {0x49da493c, 0000000000},
- {0x49989898, 0000000000},
- {0xd34949d5, 0000000000},
- {0x9dc90e11, 0000000000},
- {0xce9b9b9b, 0000000000},
- {0x000f0000, 0x00000016},
- {0x352e232c, 0000000000},
- {0x00000013, 0x00000004},
- {0x000f0000, 0x00000016},
- {0x352e272c, 0000000000},
- {0x000f0001, 0x00000016},
- {0x3239362f, 0000000000},
- {0x000077ef, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000020, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00000016, 0x00000004},
- {0x0003802a, 0x00000002},
- {0x040067e0, 0x00000002},
- {0x00000016, 0x00000004},
- {0x000077e0, 0x00000002},
- {0x00065000, 0x00000002},
- {0x000037e1, 0x00000002},
- {0x040067e1, 0x00000006},
- {0x000077e0, 0x00000002},
- {0x000077e1, 0x00000002},
- {0x000077e1, 0x00000006},
- {0xffffffff, 0000000000},
- {0x10000000, 0000000000},
- {0x0003802a, 0x00000002},
- {0x040067e0, 0x00000006},
- {0x00007675, 0x00000002},
- {0x00007676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0003802b, 0x00000002},
- {0x04002676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0000002e, 0x00000018},
- {0x0000002e, 0x00000018},
- {0000000000, 0x00000006},
- {0x0000002f, 0x00000018},
- {0x0000002f, 0x00000018},
- {0000000000, 0x00000006},
- {0x01605000, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00098000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x64c0603d, 0x00000004},
- {0x00080000, 0x00000016},
- {0000000000, 0000000000},
- {0x0400251d, 0x00000002},
- {0x00007580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x04002580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x00000046, 0x00000004},
- {0x00005000, 0000000000},
- {0x00061000, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x00019000, 0x00000002},
- {0x00011055, 0x00000014},
- {0x00000055, 0x00000012},
- {0x0400250f, 0x00000002},
- {0x0000504a, 0x00000004},
- {0x00007565, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000051, 0x00000004},
- {0x01e655b4, 0x00000002},
- {0x4401b0dc, 0x00000002},
- {0x01c110dc, 0x00000002},
- {0x2666705d, 0x00000018},
- {0x040c2565, 0x00000002},
- {0x0000005d, 0x00000018},
- {0x04002564, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000054, 0x00000004},
- {0x00401060, 0x00000008},
- {0x00101000, 0x00000002},
- {0x000d80ff, 0x00000002},
- {0x00800063, 0x00000008},
- {0x000f9000, 0x00000002},
- {0x000e00ff, 0x00000002},
- {0000000000, 0x00000006},
- {0x00000080, 0x00000018},
- {0x00000054, 0x00000004},
- {0x00007576, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00009000, 0x00000002},
- {0x00041000, 0x00000002},
- {0x0c00350e, 0x00000002},
- {0x00049000, 0x00000002},
- {0x00051000, 0x00000002},
- {0x01e785f8, 0x00000002},
- {0x00200000, 0x00000002},
- {0x00600073, 0x0000000c},
- {0x00007563, 0x00000002},
- {0x006075f0, 0x00000021},
- {0x20007068, 0x00000004},
- {0x00005068, 0x00000004},
- {0x00007576, 0x00000002},
- {0x00007577, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x0000750f, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00600076, 0x0000000c},
- {0x006075f0, 0x00000021},
- {0x000075f8, 0x00000002},
- {0x00000076, 0x00000004},
- {0x000a750e, 0x00000002},
- {0x0020750f, 0x00000002},
- {0x00600079, 0x00000004},
- {0x00007570, 0x00000002},
- {0x00007571, 0x00000002},
- {0x00007572, 0x00000006},
- {0x00005000, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00007568, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000084, 0x0000000c},
- {0x00058000, 0x00000002},
- {0x0c607562, 0x00000002},
- {0x00000086, 0x00000004},
- {0x00600085, 0x00000004},
- {0x400070dd, 0000000000},
- {0x000380dd, 0x00000002},
- {0x00000093, 0x0000001c},
- {0x00065095, 0x00000018},
- {0x040025bb, 0x00000002},
- {0x00061096, 0x00000018},
- {0x040075bc, 0000000000},
- {0x000075bb, 0x00000002},
- {0x000075bc, 0000000000},
- {0x00090000, 0x00000006},
- {0x00090000, 0x00000002},
- {0x000d8002, 0x00000006},
- {0x00005000, 0x00000002},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x01665000, 0x00000002},
- {0x000a0000, 0x00000002},
- {0x000671cc, 0x00000002},
- {0x0286f1cd, 0x00000002},
- {0x000000a3, 0x00000010},
- {0x21007000, 0000000000},
- {0x000000aa, 0x0000001c},
- {0x00065000, 0x00000002},
- {0x000a0000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x000b0000, 0x00000002},
- {0x38067000, 0x00000002},
- {0x000a00a6, 0x00000004},
- {0x20007000, 0000000000},
- {0x01200000, 0x00000002},
- {0x20077000, 0x00000002},
- {0x01200000, 0x00000002},
- {0x20007000, 0000000000},
- {0x00061000, 0x00000002},
- {0x0120751b, 0x00000002},
- {0x8040750a, 0x00000002},
- {0x8040750b, 0x00000002},
- {0x00110000, 0x00000002},
- {0x000380dd, 0x00000002},
- {0x000000bd, 0x0000001c},
- {0x00061096, 0x00000018},
- {0x844075bd, 0x00000002},
- {0x00061095, 0x00000018},
- {0x840075bb, 0x00000002},
- {0x00061096, 0x00000018},
- {0x844075bc, 0x00000002},
- {0x000000c0, 0x00000004},
- {0x804075bd, 0x00000002},
- {0x800075bb, 0x00000002},
- {0x804075bc, 0x00000002},
- {0x00108000, 0x00000002},
- {0x01400000, 0x00000002},
- {0x006000c4, 0x0000000c},
- {0x20c07000, 0x00000020},
- {0x000000c6, 0x00000012},
- {0x00800000, 0x00000006},
- {0x0080751d, 0x00000006},
- {0x000025bb, 0x00000002},
- {0x000040c0, 0x00000004},
- {0x0000775c, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460275d, 0x00000020},
- {0x00004000, 0000000000},
- {0x00007999, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460299b, 0x00000020},
- {0x00004000, 0000000000},
- {0x01e00830, 0x00000002},
- {0x21007000, 0000000000},
- {0x00005000, 0x00000002},
- {0x00038042, 0x00000002},
- {0x040025e0, 0x00000002},
- {0x000075e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000380d9, 0x00000002},
- {0x04007394, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static const u32 radeon_cp_microcode[][2] = {
- {0x21007000, 0000000000},
- {0x20007000, 0000000000},
- {0x000000b4, 0x00000004},
- {0x000000b8, 0x00000004},
- {0x6f5b4d4c, 0000000000},
- {0x4c4c427f, 0000000000},
- {0x5b568a92, 0000000000},
- {0x4ca09c6d, 0000000000},
- {0xad4c4c4c, 0000000000},
- {0x4ce1af3d, 0000000000},
- {0xd8afafaf, 0000000000},
- {0xd64c4cdc, 0000000000},
- {0x4cd10d10, 0000000000},
- {0x000f0000, 0x00000016},
- {0x362f242d, 0000000000},
- {0x00000012, 0x00000004},
- {0x000f0000, 0x00000016},
- {0x362f282d, 0000000000},
- {0x000380e7, 0x00000002},
- {0x04002c97, 0x00000002},
- {0x000f0001, 0x00000016},
- {0x333a3730, 0000000000},
- {0x000077ef, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00061000, 0x00000002},
- {0x00000021, 0x0000001a},
- {0x00004000, 0x0000001e},
- {0x00000017, 0x00000004},
- {0x0003802b, 0x00000002},
- {0x040067e0, 0x00000002},
- {0x00000017, 0x00000004},
- {0x000077e0, 0x00000002},
- {0x00065000, 0x00000002},
- {0x000037e1, 0x00000002},
- {0x040067e1, 0x00000006},
- {0x000077e0, 0x00000002},
- {0x000077e1, 0x00000002},
- {0x000077e1, 0x00000006},
- {0xffffffff, 0000000000},
- {0x10000000, 0000000000},
- {0x0003802b, 0x00000002},
- {0x040067e0, 0x00000006},
- {0x00007675, 0x00000002},
- {0x00007676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0003802c, 0x00000002},
- {0x04002676, 0x00000002},
- {0x00007677, 0x00000002},
- {0x00007678, 0x00000006},
- {0x0000002f, 0x00000018},
- {0x0000002f, 0x00000018},
- {0000000000, 0x00000006},
- {0x00000030, 0x00000018},
- {0x00000030, 0x00000018},
- {0000000000, 0x00000006},
- {0x01605000, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00098000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x64c0603e, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00080000, 0x00000016},
- {0000000000, 0000000000},
- {0x0400251d, 0x00000002},
- {0x00007580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x04002580, 0x00000002},
- {0x00067581, 0x00000002},
- {0x00000049, 0x00000004},
- {0x00005000, 0000000000},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00061000, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x00019000, 0x00000002},
- {0x00011055, 0x00000014},
- {0x00000055, 0x00000012},
- {0x0400250f, 0x00000002},
- {0x0000504f, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007565, 0x00000002},
- {0x00007566, 0x00000002},
- {0x00000058, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x01e655b4, 0x00000002},
- {0x4401b0e4, 0x00000002},
- {0x01c110e4, 0x00000002},
- {0x26667066, 0x00000018},
- {0x040c2565, 0x00000002},
- {0x00000066, 0x00000018},
- {0x04002564, 0x00000002},
- {0x00007566, 0x00000002},
- {0x0000005d, 0x00000004},
- {0x00401069, 0x00000008},
- {0x00101000, 0x00000002},
- {0x000d80ff, 0x00000002},
- {0x0080006c, 0x00000008},
- {0x000f9000, 0x00000002},
- {0x000e00ff, 0x00000002},
- {0000000000, 0x00000006},
- {0x0000008f, 0x00000018},
- {0x0000005b, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007576, 0x00000002},
- {0x00065000, 0x00000002},
- {0x00009000, 0x00000002},
- {0x00041000, 0x00000002},
- {0x0c00350e, 0x00000002},
- {0x00049000, 0x00000002},
- {0x00051000, 0x00000002},
- {0x01e785f8, 0x00000002},
- {0x00200000, 0x00000002},
- {0x0060007e, 0x0000000c},
- {0x00007563, 0x00000002},
- {0x006075f0, 0x00000021},
- {0x20007073, 0x00000004},
- {0x00005073, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00007576, 0x00000002},
- {0x00007577, 0x00000002},
- {0x0000750e, 0x00000002},
- {0x0000750f, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00600083, 0x0000000c},
- {0x006075f0, 0x00000021},
- {0x000075f8, 0x00000002},
- {0x00000083, 0x00000004},
- {0x000a750e, 0x00000002},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x0020750f, 0x00000002},
- {0x00600086, 0x00000004},
- {0x00007570, 0x00000002},
- {0x00007571, 0x00000002},
- {0x00007572, 0x00000006},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00005000, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00007568, 0x00000002},
- {0x00061000, 0x00000002},
- {0x00000095, 0x0000000c},
- {0x00058000, 0x00000002},
- {0x0c607562, 0x00000002},
- {0x00000097, 0x00000004},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x00600096, 0x00000004},
- {0x400070e5, 0000000000},
- {0x000380e6, 0x00000002},
- {0x040025c5, 0x00000002},
- {0x000380e5, 0x00000002},
- {0x000000a8, 0x0000001c},
- {0x000650aa, 0x00000018},
- {0x040025bb, 0x00000002},
- {0x000610ab, 0x00000018},
- {0x040075bc, 0000000000},
- {0x000075bb, 0x00000002},
- {0x000075bc, 0000000000},
- {0x00090000, 0x00000006},
- {0x00090000, 0x00000002},
- {0x000d8002, 0x00000006},
- {0x00007832, 0x00000002},
- {0x00005000, 0x00000002},
- {0x000380e7, 0x00000002},
- {0x04002c97, 0x00000002},
- {0x00007820, 0x00000002},
- {0x00007821, 0x00000002},
- {0x00007800, 0000000000},
- {0x01200000, 0x00000002},
- {0x20077000, 0x00000002},
- {0x01200000, 0x00000002},
- {0x20007000, 0x00000002},
- {0x00061000, 0x00000002},
- {0x0120751b, 0x00000002},
- {0x8040750a, 0x00000002},
- {0x8040750b, 0x00000002},
- {0x00110000, 0x00000002},
- {0x000380e5, 0x00000002},
- {0x000000c6, 0x0000001c},
- {0x000610ab, 0x00000018},
- {0x844075bd, 0x00000002},
- {0x000610aa, 0x00000018},
- {0x840075bb, 0x00000002},
- {0x000610ab, 0x00000018},
- {0x844075bc, 0x00000002},
- {0x000000c9, 0x00000004},
- {0x804075bd, 0x00000002},
- {0x800075bb, 0x00000002},
- {0x804075bc, 0x00000002},
- {0x00108000, 0x00000002},
- {0x01400000, 0x00000002},
- {0x006000cd, 0x0000000c},
- {0x20c07000, 0x00000020},
- {0x000000cf, 0x00000012},
- {0x00800000, 0x00000006},
- {0x0080751d, 0x00000006},
- {0000000000, 0000000000},
- {0x0000775c, 0x00000002},
- {0x00a05000, 0x00000002},
- {0x00661000, 0x00000002},
- {0x0460275d, 0x00000020},
- {0x00004000, 0000000000},
- {0x01e00830, 0x00000002},
- {0x21007000, 0000000000},
- {0x6464614d, 0000000000},
- {0x69687420, 0000000000},
- {0x00000073, 0000000000},
- {0000000000, 0000000000},
- {0x00005000, 0x00000002},
- {0x000380d0, 0x00000002},
- {0x040025e0, 0x00000002},
- {0x000075e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000380e0, 0x00000002},
- {0x04002394, 0x00000002},
- {0x00005000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0x00000008, 0000000000},
- {0x00000004, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static const u32 R300_cp_microcode[][2] = {
- {0x4200e000, 0000000000},
- {0x4000e000, 0000000000},
- {0x000000af, 0x00000008},
- {0x000000b3, 0x00000008},
- {0x6c5a504f, 0000000000},
- {0x4f4f497a, 0000000000},
- {0x5a578288, 0000000000},
- {0x4f91906a, 0000000000},
- {0x4f4f4f4f, 0000000000},
- {0x4fe24f44, 0000000000},
- {0x4f9c9c9c, 0000000000},
- {0xdc4f4fde, 0000000000},
- {0xa1cd4f4f, 0000000000},
- {0xd29d9d9d, 0000000000},
- {0x4f0f9fd7, 0000000000},
- {0x000ca000, 0x00000004},
- {0x000d0012, 0x00000038},
- {0x0000e8b4, 0x00000004},
- {0x000d0014, 0x00000038},
- {0x0000e8b6, 0x00000004},
- {0x000d0016, 0x00000038},
- {0x0000e854, 0x00000004},
- {0x000d0018, 0x00000038},
- {0x0000e855, 0x00000004},
- {0x000d001a, 0x00000038},
- {0x0000e856, 0x00000004},
- {0x000d001c, 0x00000038},
- {0x0000e857, 0x00000004},
- {0x000d001e, 0x00000038},
- {0x0000e824, 0x00000004},
- {0x000d0020, 0x00000038},
- {0x0000e825, 0x00000004},
- {0x000d0022, 0x00000038},
- {0x0000e830, 0x00000004},
- {0x000d0024, 0x00000038},
- {0x0000f0c0, 0x00000004},
- {0x000d0026, 0x00000038},
- {0x0000f0c1, 0x00000004},
- {0x000d0028, 0x00000038},
- {0x0000f041, 0x00000004},
- {0x000d002a, 0x00000038},
- {0x0000f184, 0x00000004},
- {0x000d002c, 0x00000038},
- {0x0000f185, 0x00000004},
- {0x000d002e, 0x00000038},
- {0x0000f186, 0x00000004},
- {0x000d0030, 0x00000038},
- {0x0000f187, 0x00000004},
- {0x000d0032, 0x00000038},
- {0x0000f180, 0x00000004},
- {0x000d0034, 0x00000038},
- {0x0000f393, 0x00000004},
- {0x000d0036, 0x00000038},
- {0x0000f38a, 0x00000004},
- {0x000d0038, 0x00000038},
- {0x0000f38e, 0x00000004},
- {0x0000e821, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00000043, 0x00000018},
- {0x00cce800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x001b0001, 0x00000004},
- {0x08004800, 0x00000004},
- {0x0000003a, 0x00000008},
- {0x0000a000, 0000000000},
- {0x02c0a000, 0x00000004},
- {0x000ca000, 0x00000004},
- {0x00130000, 0x00000004},
- {0x000c2000, 0x00000004},
- {0xc980c045, 0x00000008},
- {0x2000451d, 0x00000004},
- {0x0000e580, 0x00000004},
- {0x000ce581, 0x00000004},
- {0x08004580, 0x00000004},
- {0x000ce581, 0x00000004},
- {0x0000004c, 0x00000008},
- {0x0000a000, 0000000000},
- {0x000c2000, 0x00000004},
- {0x0000e50e, 0x00000004},
- {0x00032000, 0x00000004},
- {0x00022056, 0x00000028},
- {0x00000056, 0x00000024},
- {0x0800450f, 0x00000004},
- {0x0000a050, 0x00000008},
- {0x0000e565, 0x00000004},
- {0x0000e566, 0x00000004},
- {0x00000057, 0x00000008},
- {0x03cca5b4, 0x00000004},
- {0x05432000, 0x00000004},
- {0x00022000, 0x00000004},
- {0x4ccce063, 0x00000030},
- {0x08274565, 0x00000004},
- {0x00000063, 0x00000030},
- {0x08004564, 0x00000004},
- {0x0000e566, 0x00000004},
- {0x0000005a, 0x00000008},
- {0x00802066, 0x00000010},
- {0x00202000, 0x00000004},
- {0x001b00ff, 0x00000004},
- {0x01000069, 0x00000010},
- {0x001f2000, 0x00000004},
- {0x001c00ff, 0x00000004},
- {0000000000, 0x0000000c},
- {0x00000085, 0x00000030},
- {0x0000005a, 0x00000008},
- {0x0000e576, 0x00000004},
- {0x000ca000, 0x00000004},
- {0x00012000, 0x00000004},
- {0x00082000, 0x00000004},
- {0x1800650e, 0x00000004},
- {0x00092000, 0x00000004},
- {0x000a2000, 0x00000004},
- {0x000f0000, 0x00000004},
- {0x00400000, 0x00000004},
- {0x00000079, 0x00000018},
- {0x0000e563, 0x00000004},
- {0x00c0e5f9, 0x000000c2},
- {0x0000006e, 0x00000008},
- {0x0000a06e, 0x00000008},
- {0x0000e576, 0x00000004},
- {0x0000e577, 0x00000004},
- {0x0000e50e, 0x00000004},
- {0x0000e50f, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x0000007c, 0x00000018},
- {0x00c0e5f9, 0x000000c2},
- {0x0000007c, 0x00000008},
- {0x0014e50e, 0x00000004},
- {0x0040e50f, 0x00000004},
- {0x00c0007f, 0x00000008},
- {0x0000e570, 0x00000004},
- {0x0000e571, 0x00000004},
- {0x0000e572, 0x0000000c},
- {0x0000a000, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x0000e568, 0x00000004},
- {0x000c2000, 0x00000004},
- {0x00000089, 0x00000018},
- {0x000b0000, 0x00000004},
- {0x18c0e562, 0x00000004},
- {0x0000008b, 0x00000008},
- {0x00c0008a, 0x00000008},
- {0x000700e4, 0x00000004},
- {0x00000097, 0x00000038},
- {0x000ca099, 0x00000030},
- {0x080045bb, 0x00000004},
- {0x000c209a, 0x00000030},
- {0x0800e5bc, 0000000000},
- {0x0000e5bb, 0x00000004},
- {0x0000e5bc, 0000000000},
- {0x00120000, 0x0000000c},
- {0x00120000, 0x00000004},
- {0x001b0002, 0x0000000c},
- {0x0000a000, 0x00000004},
- {0x0000e821, 0x00000004},
- {0x0000e800, 0000000000},
- {0x0000e821, 0x00000004},
- {0x0000e82e, 0000000000},
- {0x02cca000, 0x00000004},
- {0x00140000, 0x00000004},
- {0x000ce1cc, 0x00000004},
- {0x050de1cd, 0x00000004},
- {0x000000a7, 0x00000020},
- {0x4200e000, 0000000000},
- {0x000000ae, 0x00000038},
- {0x000ca000, 0x00000004},
- {0x00140000, 0x00000004},
- {0x000c2000, 0x00000004},
- {0x00160000, 0x00000004},
- {0x700ce000, 0x00000004},
- {0x001400aa, 0x00000008},
- {0x4000e000, 0000000000},
- {0x02400000, 0x00000004},
- {0x400ee000, 0x00000004},
- {0x02400000, 0x00000004},
- {0x4000e000, 0000000000},
- {0x000c2000, 0x00000004},
- {0x0240e51b, 0x00000004},
- {0x0080e50a, 0x00000005},
- {0x0080e50b, 0x00000005},
- {0x00220000, 0x00000004},
- {0x000700e4, 0x00000004},
- {0x000000c1, 0x00000038},
- {0x000c209a, 0x00000030},
- {0x0880e5bd, 0x00000005},
- {0x000c2099, 0x00000030},
- {0x0800e5bb, 0x00000005},
- {0x000c209a, 0x00000030},
- {0x0880e5bc, 0x00000005},
- {0x000000c4, 0x00000008},
- {0x0080e5bd, 0x00000005},
- {0x0000e5bb, 0x00000005},
- {0x0080e5bc, 0x00000005},
- {0x00210000, 0x00000004},
- {0x02800000, 0x00000004},
- {0x00c000c8, 0x00000018},
- {0x4180e000, 0x00000040},
- {0x000000ca, 0x00000024},
- {0x01000000, 0x0000000c},
- {0x0100e51d, 0x0000000c},
- {0x000045bb, 0x00000004},
- {0x000080c4, 0x00000008},
- {0x0000f3ce, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c053cf, 0x00000040},
- {0x00008000, 0000000000},
- {0x0000f3d2, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c053d3, 0x00000040},
- {0x00008000, 0000000000},
- {0x0000f39d, 0x00000004},
- {0x0140a000, 0x00000004},
- {0x00cc2000, 0x00000004},
- {0x08c0539e, 0x00000040},
- {0x00008000, 0000000000},
- {0x03c00830, 0x00000004},
- {0x4200e000, 0000000000},
- {0x0000a000, 0x00000004},
- {0x200045e0, 0x00000004},
- {0x0000e5e1, 0000000000},
- {0x00000001, 0000000000},
- {0x000700e1, 0x00000004},
- {0x0800e394, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
- {0000000000, 0000000000},
-};
-
-static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
{
u32 ret;
RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff));
return ret;
}
+static u32 RS480_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+{
+ u32 ret;
+ RADEON_WRITE(RS480_NB_MC_INDEX, addr & 0xff);
+ ret = RADEON_READ(RS480_NB_MC_DATA);
+ RADEON_WRITE(RS480_NB_MC_INDEX, 0xff);
+ return ret;
+}
+
static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
{
+ u32 ret;
RADEON_WRITE(RS690_MC_INDEX, (addr & RS690_MC_INDEX_MASK));
- return RADEON_READ(RS690_MC_DATA);
+ ret = RADEON_READ(RS690_MC_DATA);
+ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_MASK);
+ return ret;
+}
+
+static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
+{
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
+ return RS690_READ_MCIND(dev_priv, addr);
+ else
+ return RS480_READ_MCIND(dev_priv, addr);
}
u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION);
+ return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION);
+ return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION);
else
return RADEON_READ(RADEON_MC_FB_LOCATION);
}
static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc);
+ R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc);
+ R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc);
else
RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc);
}
static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc)
{
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515)
- RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc);
+ R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc);
else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515)
- RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc);
+ R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc);
else
RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc);
}
+static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base)
+{
+ u32 agp_base_hi = upper_32_bits(agp_base);
+ u32 agp_base_lo = agp_base & 0xffffffff;
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) {
+ R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo);
+ R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
+ RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo);
+ RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) {
+ R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo);
+ R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi);
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) {
+ RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo);
+ RADEON_WRITE(RS480_AGP_BASE_2, 0);
+ } else {
+ RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200)
+ RADEON_WRITE(RADEON_AGP_BASE_2, agp_base_hi);
+ }
+}
+
static int RADEON_READ_PLL(struct drm_device * dev, int addr)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
return RADEON_READ(RADEON_PCIE_DATA);
}
-static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr)
-{
- u32 ret;
- RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f);
- ret = RADEON_READ(RADEON_IGPGART_DATA);
- RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f);
- return ret;
-}
-
#if RADEON_FIFO_DEBUG
static void radeon_status(drm_radeon_private_t * dev_priv)
{
dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
- tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT);
- tmp |= RADEON_RB3D_DC_FLUSH_ALL;
- RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {
+ tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp);
- for (i = 0; i < dev_priv->usec_timeout; i++) {
- if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT)
- & RADEON_RB3D_DC_BUSY)) {
- return 0;
+ for (i = 0; i < dev_priv->usec_timeout; i++) {
+ if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT)
+ & RADEON_RB3D_DC_BUSY)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
+ }
+ } else {
+ /* 3D */
+ tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp);
+
+ /* 2D */
+ tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT);
+ tmp |= RADEON_RB3D_DC_FLUSH_ALL;
+ RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp);
+
+ for (i = 0; i < dev_priv->usec_timeout; i++) {
+ if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT)
+ & RADEON_RB3D_DC_BUSY)) {
+ return 0;
+ }
+ DRM_UDELAY(1);
}
- DRM_UDELAY(1);
}
#if RADEON_FIFO_DEBUG
return -EBUSY;
}
+static void radeon_init_pipes(drm_radeon_private_t *dev_priv)
+{
+ uint32_t gb_tile_config, gb_pipe_sel = 0;
+
+ /* RS4xx/RS6xx/R4xx/R5xx */
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
+ gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
+ dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1;
+ } else {
+ /* R3xx */
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) {
+ dev_priv->num_gb_pipes = 2;
+ } else {
+ /* R3Vxx */
+ dev_priv->num_gb_pipes = 1;
+ }
+ }
+ DRM_INFO("Num pipes: %d\n", dev_priv->num_gb_pipes);
+
+ gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16 /*| R300_SUBPIXEL_1_16*/);
+
+ switch (dev_priv->num_gb_pipes) {
+ case 2: gb_tile_config |= R300_PIPE_COUNT_R300; break;
+ case 3: gb_tile_config |= R300_PIPE_COUNT_R420_3P; break;
+ case 4: gb_tile_config |= R300_PIPE_COUNT_R420; break;
+ default:
+ case 1: gb_tile_config |= R300_PIPE_COUNT_RV350; break;
+ }
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
+ RADEON_WRITE_PLL(R500_DYN_SCLK_PWMEM_PIPE, (1 | ((gb_pipe_sel >> 8) & 0xf) << 4));
+ RADEON_WRITE(R500_SU_REG_DEST, ((1 << dev_priv->num_gb_pipes) - 1));
+ }
+ RADEON_WRITE(R300_GB_TILE_CONFIG, gb_tile_config);
+ radeon_do_wait_for_idle(dev_priv);
+ RADEON_WRITE(R300_DST_PIPE_CONFIG, RADEON_READ(R300_DST_PIPE_CONFIG) | R300_PIPE_AUTO_CONFIG);
+ RADEON_WRITE(R300_RB2D_DSTCACHE_MODE, (RADEON_READ(R300_RB2D_DSTCACHE_MODE) |
+ R300_DC_AUTOFLUSH_ENABLE |
+ R300_DC_DC_DISABLE_IGNORE_PE));
+
+
+}
+
/* ================================================================
* CP control, initialization
*/
radeon_do_wait_for_idle(dev_priv);
RADEON_WRITE(RADEON_CP_ME_RAM_ADDR, 0);
-
- if (dev_priv->microcode_version == UCODE_R200) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV200) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS100) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS200)) {
+ DRM_INFO("Loading R100 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ R100_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ R100_cp_microcode[i][0]);
+ }
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R200) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV250) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV280) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS300)) {
DRM_INFO("Loading R200 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
R200_cp_microcode[i][0]);
}
- } else if (dev_priv->microcode_version == UCODE_R300) {
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) {
DRM_INFO("Loading R300 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
R300_cp_microcode[i][0]);
}
- } else {
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) {
+ DRM_INFO("Loading R400 Microcode\n");
for (i = 0; i < 256; i++) {
RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
- radeon_cp_microcode[i][1]);
+ R420_cp_microcode[i][1]);
RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
- radeon_cp_microcode[i][0]);
+ R420_cp_microcode[i][0]);
+ }
+ } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
+ DRM_INFO("Loading RS690 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ RS690_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ RS690_cp_microcode[i][0]);
+ }
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R520) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R580) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV560) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV570)) {
+ DRM_INFO("Loading R500 Microcode\n");
+ for (i = 0; i < 256; i++) {
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAH,
+ R520_cp_microcode[i][1]);
+ RADEON_WRITE(RADEON_CP_ME_RAM_DATAL,
+ R520_cp_microcode[i][0]);
}
}
}
static int radeon_do_engine_reset(struct drm_device * dev)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
- u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset;
+ u32 clock_cntl_index = 0, mclk_cntl = 0, rbbm_soft_reset;
DRM_DEBUG("\n");
radeon_do_pixcache_flush(dev_priv);
- if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) {
+ /* may need something similar for newer chips */
clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX);
mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL);
RADEON_FORCEON_YCLKB |
RADEON_FORCEON_MC |
RADEON_FORCEON_AIC));
+ }
- rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET);
-
- RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset |
- RADEON_SOFT_RESET_CP |
- RADEON_SOFT_RESET_HI |
- RADEON_SOFT_RESET_SE |
- RADEON_SOFT_RESET_RE |
- RADEON_SOFT_RESET_PP |
- RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB));
- RADEON_READ(RADEON_RBBM_SOFT_RESET);
- RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset &
- ~(RADEON_SOFT_RESET_CP |
- RADEON_SOFT_RESET_HI |
- RADEON_SOFT_RESET_SE |
- RADEON_SOFT_RESET_RE |
- RADEON_SOFT_RESET_PP |
- RADEON_SOFT_RESET_E2 |
- RADEON_SOFT_RESET_RB)));
- RADEON_READ(RADEON_RBBM_SOFT_RESET);
-
+ rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET);
+
+ RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset |
+ RADEON_SOFT_RESET_CP |
+ RADEON_SOFT_RESET_HI |
+ RADEON_SOFT_RESET_SE |
+ RADEON_SOFT_RESET_RE |
+ RADEON_SOFT_RESET_PP |
+ RADEON_SOFT_RESET_E2 |
+ RADEON_SOFT_RESET_RB));
+ RADEON_READ(RADEON_RBBM_SOFT_RESET);
+ RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset &
+ ~(RADEON_SOFT_RESET_CP |
+ RADEON_SOFT_RESET_HI |
+ RADEON_SOFT_RESET_SE |
+ RADEON_SOFT_RESET_RE |
+ RADEON_SOFT_RESET_PP |
+ RADEON_SOFT_RESET_E2 |
+ RADEON_SOFT_RESET_RB)));
+ RADEON_READ(RADEON_RBBM_SOFT_RESET);
+
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) {
RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl);
RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index);
RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset);
}
+ /* setup the raster pipes */
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300)
+ radeon_init_pipes(dev_priv);
+
/* Reset the CP ring */
radeon_do_cp_reset(dev_priv);
#if __OS_HAS_AGP
if (dev_priv->flags & RADEON_IS_AGP) {
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base);
+ radeon_write_agp_base(dev_priv, dev->agp->base);
+
radeon_write_agp_location(dev_priv,
(((dev_priv->gart_vm_start - 1 +
dev_priv->gart_size) & 0xffff0000) |
/* Enable or disable IGP GART on the chip */
static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on)
-{
- u32 temp, tmp;
-
- tmp = RADEON_READ(RADEON_AIC_CNTL);
- if (on) {
- DRM_DEBUG("programming igpgart %08X %08lX %08X\n",
- dev_priv->gart_vm_start,
- (long)dev_priv->gart_info.bus_addr,
- dev_priv->gart_size);
-
- RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR,
- dev_priv->gart_info.bus_addr);
-
- temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp);
-
- RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start);
- dev_priv->gart_size = 32*1024*1024;
- radeon_write_agp_location(dev_priv,
- (((dev_priv->gart_vm_start - 1 +
- dev_priv->gart_size) & 0xffff0000) |
- (dev_priv->gart_vm_start >> 16)));
-
- temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp);
-
- RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1);
- RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH);
- RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0);
- }
-}
-
-/* Enable or disable RS690 GART on the chip */
-static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on)
{
u32 temp;
if (on) {
- DRM_DEBUG("programming rs690 gart %08X %08lX %08X\n",
+ DRM_DEBUG("programming igp gart %08X %08lX %08X\n",
dev_priv->gart_vm_start,
(long)dev_priv->gart_info.bus_addr,
dev_priv->gart_size);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_MISC_CNTL);
- RS690_WRITE_MCIND(RS690_MC_MISC_CNTL, 0x5000);
+ temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL);
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)
+ IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN |
+ RS690_BLOCK_GFX_D3_EN));
+ else
+ IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN);
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE,
- RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN |
+ RS480_VA_SIZE_32MB));
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID);
- RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800);
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_FEATURE_ID);
+ IGP_WRITE_MCIND(RS480_GART_FEATURE_ID, (RS480_HANG_EN |
+ RS480_TLB_ENABLE |
+ RS480_GTW_LAC_EN |
+ RS480_1LEVEL_GART));
- RS690_WRITE_MCIND(RS690_MC_GART_BASE,
- dev_priv->gart_info.bus_addr);
+ temp = dev_priv->gart_info.bus_addr & 0xfffff000;
+ temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4;
+ IGP_WRITE_MCIND(RS480_GART_BASE, temp);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL);
- RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000);
+ temp = IGP_READ_MCIND(dev_priv, RS480_AGP_MODE_CNTL);
+ IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) |
+ RS480_REQ_TYPE_SNOOP_DIS));
- RS690_WRITE_MCIND(RS690_MC_AGP_BASE,
- (unsigned int)dev_priv->gart_vm_start);
+ radeon_write_agp_base(dev_priv, dev_priv->gart_vm_start);
dev_priv->gart_size = 32*1024*1024;
temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) &
0xffff0000) | (dev_priv->gart_vm_start >> 16));
- RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp);
+ radeon_write_agp_location(dev_priv, temp);
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_SIZE);
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE,
- RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB);
+ temp = IGP_READ_MCIND(dev_priv, RS480_AGP_ADDRESS_SPACE_SIZE);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN |
+ RS480_VA_SIZE_32MB));
do {
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL);
- if ((temp & RS690_MC_GART_CLEAR_STATUS) ==
- RS690_MC_GART_CLEAR_DONE)
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL);
+ if ((temp & RS480_GART_CACHE_INVALIDATE) == 0)
break;
DRM_UDELAY(1);
} while (1);
- RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL,
- RS690_MC_GART_CC_CLEAR);
+ IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL,
+ RS480_GART_CACHE_INVALIDATE);
+
do {
- temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL);
- if ((temp & RS690_MC_GART_CLEAR_STATUS) ==
- RS690_MC_GART_CLEAR_DONE)
+ temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL);
+ if ((temp & RS480_GART_CACHE_INVALIDATE) == 0)
break;
DRM_UDELAY(1);
} while (1);
- RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL,
- RS690_MC_GART_CC_NO_CHANGE);
+ IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, 0);
} else {
- RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, RS690_MC_GART_DIS);
+ IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, 0);
}
}
{
u32 tmp;
- if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) {
- radeon_set_rs690gart(dev_priv, on);
- return;
- }
-
- if (dev_priv->flags & RADEON_IS_IGPGART) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) ||
+ (dev_priv->flags & RADEON_IS_IGPGART)) {
radeon_set_igpgart(dev_priv, on);
return;
}
radeon_cp_init_ring_buffer(dev, dev_priv);
radeon_do_engine_reset(dev);
+ radeon_enable_interrupt(dev);
DRM_DEBUG("radeon_do_resume_cp() complete\n");
# define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8
#define R300_CMD_SCRATCH 8
+#define R300_CMD_R500FP 9
typedef union {
unsigned int u;
struct {
unsigned char cmd_type, reg, n_bufs, flags;
} scratch;
+ struct {
+ unsigned char cmd_type, count, adrlo, adrhi_flags;
+ } r500fp;
} drm_r300_cmd_header_t;
#define RADEON_FRONT 0x1
#define RADEON_USE_HIERZ 0x40000000
#define RADEON_USE_COMP_ZBUF 0x20000000
+#define R500FP_CONSTANT_TYPE (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
/* Primitive types
*/
#define RADEON_POINTS 0x1
#define RADEON_PARAM_CARD_TYPE 12
#define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */
#define RADEON_PARAM_FB_LOCATION 14 /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */
typedef struct drm_radeon_getparam {
int param;
#define DRIVER_NAME "radeon"
#define DRIVER_DESC "ATI Radeon"
-#define DRIVER_DATE "20060524"
+#define DRIVER_DATE "20080528"
/* Interface history:
*
* 1.26- Add support for variable size PCI(E) gart aperture
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
+ * 1.29- R500 3D cmd buffer support
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 28
+#define DRIVER_MINOR 29
#define DRIVER_PATCHLEVEL 0
/*
CHIP_RV380,
CHIP_R420,
CHIP_RV410,
- CHIP_RS400,
+ CHIP_RS480,
CHIP_RS690,
CHIP_RV515,
CHIP_R520,
int vblank_crtc;
uint32_t irq_enable_reg;
int irq_enabled;
+ uint32_t r500_disp_irq_reg;
struct radeon_surface surfaces[RADEON_MAX_SURFACES];
struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES];
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
unsigned long fb_aper_offset;
+
+ int num_gb_pipes;
} drm_radeon_private_t;
typedef struct drm_radeon_buf_priv {
extern void radeon_driver_irq_preinstall(struct drm_device * dev);
extern void radeon_driver_irq_postinstall(struct drm_device * dev);
extern void radeon_driver_irq_uninstall(struct drm_device * dev);
+extern void radeon_enable_interrupt(struct drm_device *dev);
extern int radeon_vblank_crtc_get(struct drm_device *dev);
extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value);
#define RADEON_PCIE_DATA 0x0034
#define RADEON_PCIE_TX_GART_CNTL 0x10
# define RADEON_PCIE_TX_GART_EN (1 << 0)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1)
-# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1)
-# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0<<3)
-# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1<<3)
-# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1<<5)
-# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1 << 1)
+# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3 << 1)
+# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0 << 3)
+# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1 << 3)
+# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1 << 5)
+# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1 << 8)
#define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11
#define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12
#define RADEON_PCIE_TX_GART_BASE 0x13
#define RADEON_PCIE_TX_GART_END_LO 0x16
#define RADEON_PCIE_TX_GART_END_HI 0x17
-#define RADEON_IGPGART_INDEX 0x168
-#define RADEON_IGPGART_DATA 0x16c
-#define RADEON_IGPGART_UNK_18 0x18
-#define RADEON_IGPGART_CTRL 0x2b
-#define RADEON_IGPGART_BASE_ADDR 0x2c
-#define RADEON_IGPGART_FLUSH 0x2e
-#define RADEON_IGPGART_ENABLE 0x38
-#define RADEON_IGPGART_UNK_39 0x39
+#define RS480_NB_MC_INDEX 0x168
+# define RS480_NB_MC_IND_WR_EN (1 << 8)
+#define RS480_NB_MC_DATA 0x16c
#define RS690_MC_INDEX 0x78
# define RS690_MC_INDEX_MASK 0x1ff
# define RS690_MC_INDEX_WR_ACK 0x7f
#define RS690_MC_DATA 0x7c
-#define RS690_MC_MISC_CNTL 0x18
-#define RS690_MC_GART_FEATURE_ID 0x2b
-#define RS690_MC_GART_BASE 0x2c
-#define RS690_MC_GART_CACHE_CNTL 0x2e
-# define RS690_MC_GART_CC_NO_CHANGE 0x0
-# define RS690_MC_GART_CC_CLEAR 0x1
-# define RS690_MC_GART_CLEAR_STATUS (1 << 1)
-# define RS690_MC_GART_CLEAR_DONE (0 << 1)
-# define RS690_MC_GART_CLEAR_PENDING (1 << 1)
-#define RS690_MC_AGP_SIZE 0x38
-# define RS690_MC_GART_DIS 0x0
-# define RS690_MC_GART_EN 0x1
-# define RS690_MC_AGP_SIZE_32MB (0 << 1)
-# define RS690_MC_AGP_SIZE_64MB (1 << 1)
-# define RS690_MC_AGP_SIZE_128MB (2 << 1)
-# define RS690_MC_AGP_SIZE_256MB (3 << 1)
-# define RS690_MC_AGP_SIZE_512MB (4 << 1)
-# define RS690_MC_AGP_SIZE_1GB (5 << 1)
-# define RS690_MC_AGP_SIZE_2GB (6 << 1)
-#define RS690_MC_AGP_MODE_CONTROL 0x39
+/* MC indirect registers */
+#define RS480_MC_MISC_CNTL 0x18
+# define RS480_DISABLE_GTW (1 << 1)
+/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */
+# define RS480_GART_INDEX_REG_EN (1 << 12)
+# define RS690_BLOCK_GFX_D3_EN (1 << 14)
+#define RS480_K8_FB_LOCATION 0x1e
+#define RS480_GART_FEATURE_ID 0x2b
+# define RS480_HANG_EN (1 << 11)
+# define RS480_TLB_ENABLE (1 << 18)
+# define RS480_P2P_ENABLE (1 << 19)
+# define RS480_GTW_LAC_EN (1 << 25)
+# define RS480_2LEVEL_GART (0 << 30)
+# define RS480_1LEVEL_GART (1 << 30)
+# define RS480_PDC_EN (1 << 31)
+#define RS480_GART_BASE 0x2c
+#define RS480_GART_CACHE_CNTRL 0x2e
+# define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */
+#define RS480_AGP_ADDRESS_SPACE_SIZE 0x38
+# define RS480_GART_EN (1 << 0)
+# define RS480_VA_SIZE_32MB (0 << 1)
+# define RS480_VA_SIZE_64MB (1 << 1)
+# define RS480_VA_SIZE_128MB (2 << 1)
+# define RS480_VA_SIZE_256MB (3 << 1)
+# define RS480_VA_SIZE_512MB (4 << 1)
+# define RS480_VA_SIZE_1GB (5 << 1)
+# define RS480_VA_SIZE_2GB (6 << 1)
+#define RS480_AGP_MODE_CNTL 0x39
+# define RS480_POST_GART_Q_SIZE (1 << 18)
+# define RS480_NONGART_SNOOP (1 << 19)
+# define RS480_AGP_RD_BUF_SIZE (1 << 20)
+# define RS480_REQ_TYPE_SNOOP_SHIFT 22
+# define RS480_REQ_TYPE_SNOOP_MASK 0x3
+# define RS480_REQ_TYPE_SNOOP_DIS (1 << 24)
+#define RS480_MC_MISC_UMA_CNTL 0x5f
+#define RS480_MC_MCLK_CNTL 0x7a
+#define RS480_MC_UMA_DUALCH_CNTL 0x86
+
#define RS690_MC_FB_LOCATION 0x100
#define RS690_MC_AGP_LOCATION 0x101
#define RS690_MC_AGP_BASE 0x102
+#define RS690_MC_AGP_BASE_2 0x103
#define R520_MC_IND_INDEX 0x70
-#define R520_MC_IND_WR_EN (1<<24)
+#define R520_MC_IND_WR_EN (1 << 24)
#define R520_MC_IND_DATA 0x74
#define RV515_MC_FB_LOCATION 0x01
#define RV515_MC_AGP_LOCATION 0x02
+#define RV515_MC_AGP_BASE 0x03
+#define RV515_MC_AGP_BASE_2 0x04
#define R520_MC_FB_LOCATION 0x04
#define R520_MC_AGP_LOCATION 0x05
+#define R520_MC_AGP_BASE 0x06
+#define R520_MC_AGP_BASE_2 0x07
#define RADEON_MPP_TB_CONFIG 0x01c0
#define RADEON_MEM_CNTL 0x0140
#define RADEON_MEM_SDRAM_MODE_REG 0x0158
+#define RADEON_AGP_BASE_2 0x015c /* r200+ only */
+#define RS480_AGP_BASE_2 0x0164
#define RADEON_AGP_BASE 0x0170
+/* pipe config regs */
+#define R400_GB_PIPE_SELECT 0x402c
+#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */
+#define R500_SU_REG_DEST 0x42c8
+#define R300_GB_TILE_CONFIG 0x4018
+# define R300_ENABLE_TILING (1 << 0)
+# define R300_PIPE_COUNT_RV350 (0 << 1)
+# define R300_PIPE_COUNT_R300 (3 << 1)
+# define R300_PIPE_COUNT_R420_3P (6 << 1)
+# define R300_PIPE_COUNT_R420 (7 << 1)
+# define R300_TILE_SIZE_8 (0 << 4)
+# define R300_TILE_SIZE_16 (1 << 4)
+# define R300_TILE_SIZE_32 (2 << 4)
+# define R300_SUBPIXEL_1_12 (0 << 16)
+# define R300_SUBPIXEL_1_16 (1 << 16)
+#define R300_DST_PIPE_CONFIG 0x170c
+# define R300_PIPE_AUTO_CONFIG (1 << 31)
+#define R300_RB2D_DSTCACHE_MODE 0x3428
+# define R300_DC_AUTOFLUSH_ENABLE (1 << 8)
+# define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17)
+
#define RADEON_RB3D_COLOROFFSET 0x1c40
#define RADEON_RB3D_COLORPITCH 0x1c48
#define RADEON_PP_TXFILTER_1 0x1c6c
#define RADEON_PP_TXFILTER_2 0x1c84
-#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c
-# define RADEON_RB2D_DC_FLUSH (3 << 0)
-# define RADEON_RB2D_DC_FREE (3 << 2)
-# define RADEON_RB2D_DC_FLUSH_ALL 0xf
-# define RADEON_RB2D_DC_BUSY (1 << 31)
+#define R300_RB2D_DSTCACHE_CTLSTAT 0x342c /* use R300_DSTCACHE_CTLSTAT */
+#define R300_DSTCACHE_CTLSTAT 0x1714
+# define R300_RB2D_DC_FLUSH (3 << 0)
+# define R300_RB2D_DC_FREE (3 << 2)
+# define R300_RB2D_DC_FLUSH_ALL 0xf
+# define R300_RB2D_DC_BUSY (1 << 31)
#define RADEON_RB3D_CNTL 0x1c3c
# define RADEON_ALPHA_BLEND_ENABLE (1 << 0)
# define RADEON_PLANE_MASK_ENABLE (1 << 1)
# define RADEON_RB3D_ZC_FREE (1 << 2)
# define RADEON_RB3D_ZC_FLUSH_ALL 0x5
# define RADEON_RB3D_ZC_BUSY (1 << 31)
+#define R300_ZB_ZCACHE_CTLSTAT 0x4f18
+# define R300_ZC_FLUSH (1 << 0)
+# define R300_ZC_FREE (1 << 1)
+# define R300_ZC_FLUSH_ALL 0x3
+# define R300_ZC_BUSY (1 << 31)
#define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c
# define RADEON_RB3D_DC_FLUSH (3 << 0)
# define RADEON_RB3D_DC_FREE (3 << 2)
# define RADEON_RB3D_DC_FLUSH_ALL 0xf
# define RADEON_RB3D_DC_BUSY (1 << 31)
+#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c
+# define R300_RB3D_DC_FINISH (1 << 4)
#define RADEON_RB3D_ZSTENCILCNTL 0x1c2c
# define RADEON_Z_TEST_MASK (7 << 4)
# define RADEON_Z_TEST_ALWAYS (7 << 4)
#define R200_VAP_PVS_CNTL_1 0x22D0
+#define R500_D1CRTC_STATUS 0x609c
+#define R500_D2CRTC_STATUS 0x689c
+#define R500_CRTC_V_BLANK (1<<0)
+
+#define R500_D1CRTC_FRAME_COUNT 0x60a4
+#define R500_D2CRTC_FRAME_COUNT 0x68a4
+
+#define R500_D1MODE_V_COUNTER 0x6530
+#define R500_D2MODE_V_COUNTER 0x6d30
+
+#define R500_D1MODE_VBLANK_STATUS 0x6534
+#define R500_D2MODE_VBLANK_STATUS 0x6d34
+#define R500_VBLANK_OCCURED (1<<0)
+#define R500_VBLANK_ACK (1<<4)
+#define R500_VBLANK_STAT (1<<12)
+#define R500_VBLANK_INT (1<<16)
+
+#define R500_DxMODE_INT_MASK 0x6540
+#define R500_D1MODE_INT_MASK (1<<0)
+#define R500_D2MODE_INT_MASK (1<<8)
+
+#define R500_DISP_INTERRUPT_STATUS 0x7edc
+#define R500_D1_VBLANK_INTERRUPT (1 << 4)
+#define R500_D2_VBLANK_INTERRUPT (1 << 5)
+
/* Constants */
#define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */
#define RADEON_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) )
#define RADEON_WRITE8(reg,val) DRM_WRITE8( dev_priv->mmio, (reg), (val) )
-#define RADEON_WRITE_PLL( addr, val ) \
+#define RADEON_WRITE_PLL(addr, val) \
do { \
- RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX, \
+ RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX, \
((addr) & 0x1f) | RADEON_PLL_WR_EN ); \
- RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \
+ RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \
} while (0)
-#define RADEON_WRITE_IGPGART( addr, val ) \
+#define RADEON_WRITE_PCIE(addr, val) \
do { \
- RADEON_WRITE( RADEON_IGPGART_INDEX, \
- ((addr) & 0x7f) | (1 << 8)); \
- RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \
- RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \
+ RADEON_WRITE8(RADEON_PCIE_INDEX, \
+ ((addr) & 0xff)); \
+ RADEON_WRITE(RADEON_PCIE_DATA, (val)); \
} while (0)
-#define RADEON_WRITE_PCIE( addr, val ) \
-do { \
- RADEON_WRITE8( RADEON_PCIE_INDEX, \
- ((addr) & 0xff)); \
- RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \
+#define R500_WRITE_MCIND(addr, val) \
+do { \
+ RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \
+ RADEON_WRITE(R520_MC_IND_DATA, (val)); \
+ RADEON_WRITE(R520_MC_IND_INDEX, 0); \
} while (0)
-#define RADEON_WRITE_MCIND( addr, val ) \
- do { \
- RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \
- RADEON_WRITE(R520_MC_IND_DATA, (val)); \
- RADEON_WRITE(R520_MC_IND_INDEX, 0); \
- } while (0)
+#define RS480_WRITE_MCIND(addr, val) \
+do { \
+ RADEON_WRITE(RS480_NB_MC_INDEX, \
+ ((addr) & 0xff) | RS480_NB_MC_IND_WR_EN); \
+ RADEON_WRITE(RS480_NB_MC_DATA, (val)); \
+ RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); \
+} while (0)
-#define RS690_WRITE_MCIND( addr, val ) \
+#define RS690_WRITE_MCIND(addr, val) \
do { \
RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK)); \
RADEON_WRITE(RS690_MC_DATA, val); \
RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); \
} while (0)
+#define IGP_WRITE_MCIND(addr, val) \
+do { \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \
+ RS690_WRITE_MCIND(addr, val); \
+ else \
+ RS480_WRITE_MCIND(addr, val); \
+} while (0)
+
#define CP_PACKET0( reg, n ) \
(RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2))
#define CP_PACKET0_TABLE( reg, n ) \
} while (0)
#define RADEON_FLUSH_CACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_DC_FLUSH ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH); \
+ } \
} while (0)
#define RADEON_PURGE_CACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_DC_FLUSH_ALL ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \
+ } \
} while (0)
#define RADEON_FLUSH_ZCACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_ZC_FLUSH ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_ZC_FLUSH); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(R300_ZC_FLUSH); \
+ } \
} while (0)
#define RADEON_PURGE_ZCACHE() do { \
- OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \
- OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL ); \
+ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \
+ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \
+ OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \
+ } else { \
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \
+ OUT_RING(R300_ZC_FLUSH_ALL); \
+ } \
} while (0)
/* ================================================================
return radeon_wait_irq(dev, irqwait->irq_seq);
}
-static void radeon_enable_interrupt(struct drm_device *dev)
+void radeon_enable_interrupt(struct drm_device *dev)
{
drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private;
--- /dev/null
+/*
+ * Copyright 2007 Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef RADEON_MICROCODE_H
+#define RADEON_MICROCODE_H
+
+/* production radeon ucode r1xx-r6xx */
+static const u32 R100_cp_microcode[][2] = {
+ { 0x21007000, 0000000000 },
+ { 0x20007000, 0000000000 },
+ { 0x000000b4, 0x00000004 },
+ { 0x000000b8, 0x00000004 },
+ { 0x6f5b4d4c, 0000000000 },
+ { 0x4c4c427f, 0000000000 },
+ { 0x5b568a92, 0000000000 },
+ { 0x4ca09c6d, 0000000000 },
+ { 0xad4c4c4c, 0000000000 },
+ { 0x4ce1af3d, 0000000000 },
+ { 0xd8afafaf, 0000000000 },
+ { 0xd64c4cdc, 0000000000 },
+ { 0x4cd10d10, 0000000000 },
+ { 0x000f0000, 0x00000016 },
+ { 0x362f242d, 0000000000 },
+ { 0x00000012, 0x00000004 },
+ { 0x000f0000, 0x00000016 },
+ { 0x362f282d, 0000000000 },
+ { 0x000380e7, 0x00000002 },
+ { 0x04002c97, 0x00000002 },
+ { 0x000f0001, 0x00000016 },
+ { 0x333a3730, 0000000000 },
+ { 0x000077ef, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000021, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00000017, 0x00000004 },
+ { 0x0003802b, 0x00000002 },
+ { 0x040067e0, 0x00000002 },
+ { 0x00000017, 0x00000004 },
+ { 0x000077e0, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x000037e1, 0x00000002 },
+ { 0x040067e1, 0x00000006 },
+ { 0x000077e0, 0x00000002 },
+ { 0x000077e1, 0x00000002 },
+ { 0x000077e1, 0x00000006 },
+ { 0xffffffff, 0000000000 },
+ { 0x10000000, 0000000000 },
+ { 0x0003802b, 0x00000002 },
+ { 0x040067e0, 0x00000006 },
+ { 0x00007675, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0000002f, 0x00000018 },
+ { 0x0000002f, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x00000030, 0x00000018 },
+ { 0x00000030, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x01605000, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00098000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x64c0603e, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00080000, 0x00000016 },
+ { 0000000000, 0000000000 },
+ { 0x0400251d, 0x00000002 },
+ { 0x00007580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x04002580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x00000049, 0x00000004 },
+ { 0x00005000, 0000000000 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x00019000, 0x00000002 },
+ { 0x00011055, 0x00000014 },
+ { 0x00000055, 0x00000012 },
+ { 0x0400250f, 0x00000002 },
+ { 0x0000504f, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007565, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000058, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x01e655b4, 0x00000002 },
+ { 0x4401b0e4, 0x00000002 },
+ { 0x01c110e4, 0x00000002 },
+ { 0x26667066, 0x00000018 },
+ { 0x040c2565, 0x00000002 },
+ { 0x00000066, 0x00000018 },
+ { 0x04002564, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x0000005d, 0x00000004 },
+ { 0x00401069, 0x00000008 },
+ { 0x00101000, 0x00000002 },
+ { 0x000d80ff, 0x00000002 },
+ { 0x0080006c, 0x00000008 },
+ { 0x000f9000, 0x00000002 },
+ { 0x000e00ff, 0x00000002 },
+ { 0000000000, 0x00000006 },
+ { 0x0000008f, 0x00000018 },
+ { 0x0000005b, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007576, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00009000, 0x00000002 },
+ { 0x00041000, 0x00000002 },
+ { 0x0c00350e, 0x00000002 },
+ { 0x00049000, 0x00000002 },
+ { 0x00051000, 0x00000002 },
+ { 0x01e785f8, 0x00000002 },
+ { 0x00200000, 0x00000002 },
+ { 0x0060007e, 0x0000000c },
+ { 0x00007563, 0x00000002 },
+ { 0x006075f0, 0x00000021 },
+ { 0x20007073, 0x00000004 },
+ { 0x00005073, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00007576, 0x00000002 },
+ { 0x00007577, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x0000750f, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00600083, 0x0000000c },
+ { 0x006075f0, 0x00000021 },
+ { 0x000075f8, 0x00000002 },
+ { 0x00000083, 0x00000004 },
+ { 0x000a750e, 0x00000002 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x0020750f, 0x00000002 },
+ { 0x00600086, 0x00000004 },
+ { 0x00007570, 0x00000002 },
+ { 0x00007571, 0x00000002 },
+ { 0x00007572, 0x00000006 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00005000, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00007568, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000095, 0x0000000c },
+ { 0x00058000, 0x00000002 },
+ { 0x0c607562, 0x00000002 },
+ { 0x00000097, 0x00000004 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x00600096, 0x00000004 },
+ { 0x400070e5, 0000000000 },
+ { 0x000380e6, 0x00000002 },
+ { 0x040025c5, 0x00000002 },
+ { 0x000380e5, 0x00000002 },
+ { 0x000000a8, 0x0000001c },
+ { 0x000650aa, 0x00000018 },
+ { 0x040025bb, 0x00000002 },
+ { 0x000610ab, 0x00000018 },
+ { 0x040075bc, 0000000000 },
+ { 0x000075bb, 0x00000002 },
+ { 0x000075bc, 0000000000 },
+ { 0x00090000, 0x00000006 },
+ { 0x00090000, 0x00000002 },
+ { 0x000d8002, 0x00000006 },
+ { 0x00007832, 0x00000002 },
+ { 0x00005000, 0x00000002 },
+ { 0x000380e7, 0x00000002 },
+ { 0x04002c97, 0x00000002 },
+ { 0x00007820, 0x00000002 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x01200000, 0x00000002 },
+ { 0x20077000, 0x00000002 },
+ { 0x01200000, 0x00000002 },
+ { 0x20007000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x0120751b, 0x00000002 },
+ { 0x8040750a, 0x00000002 },
+ { 0x8040750b, 0x00000002 },
+ { 0x00110000, 0x00000002 },
+ { 0x000380e5, 0x00000002 },
+ { 0x000000c6, 0x0000001c },
+ { 0x000610ab, 0x00000018 },
+ { 0x844075bd, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x840075bb, 0x00000002 },
+ { 0x000610ab, 0x00000018 },
+ { 0x844075bc, 0x00000002 },
+ { 0x000000c9, 0x00000004 },
+ { 0x804075bd, 0x00000002 },
+ { 0x800075bb, 0x00000002 },
+ { 0x804075bc, 0x00000002 },
+ { 0x00108000, 0x00000002 },
+ { 0x01400000, 0x00000002 },
+ { 0x006000cd, 0x0000000c },
+ { 0x20c07000, 0x00000020 },
+ { 0x000000cf, 0x00000012 },
+ { 0x00800000, 0x00000006 },
+ { 0x0080751d, 0x00000006 },
+ { 0000000000, 0000000000 },
+ { 0x0000775c, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460275d, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x01e00830, 0x00000002 },
+ { 0x21007000, 0000000000 },
+ { 0x6464614d, 0000000000 },
+ { 0x69687420, 0000000000 },
+ { 0x00000073, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x00005000, 0x00000002 },
+ { 0x000380d0, 0x00000002 },
+ { 0x040025e0, 0x00000002 },
+ { 0x000075e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000380e0, 0x00000002 },
+ { 0x04002394, 0x00000002 },
+ { 0x00005000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x00000008, 0000000000 },
+ { 0x00000004, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R200_cp_microcode[][2] = {
+ { 0x21007000, 0000000000 },
+ { 0x20007000, 0000000000 },
+ { 0x000000bf, 0x00000004 },
+ { 0x000000c3, 0x00000004 },
+ { 0x7a685e5d, 0000000000 },
+ { 0x5d5d5588, 0000000000 },
+ { 0x68659197, 0000000000 },
+ { 0x5da19f78, 0000000000 },
+ { 0x5d5d5d5d, 0000000000 },
+ { 0x5dee5d50, 0000000000 },
+ { 0xf2acacac, 0000000000 },
+ { 0xe75df9e9, 0000000000 },
+ { 0xb1dd0e11, 0000000000 },
+ { 0xe2afafaf, 0000000000 },
+ { 0x000f0000, 0x00000016 },
+ { 0x452f232d, 0000000000 },
+ { 0x00000013, 0x00000004 },
+ { 0x000f0000, 0x00000016 },
+ { 0x452f272d, 0000000000 },
+ { 0x000f0001, 0x00000016 },
+ { 0x3e4d4a37, 0000000000 },
+ { 0x000077ef, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00061000, 0x00000002 },
+ { 0x00000020, 0x0000001a },
+ { 0x00004000, 0x0000001e },
+ { 0x00000016, 0x00000004 },
+ { 0x0003802a, 0x00000002 },
+ { 0x040067e0, 0x00000002 },
+ { 0x00000016, 0x00000004 },
+ { 0x000077e0, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x000037e1, 0x00000002 },
+ { 0x040067e1, 0x00000006 },
+ { 0x000077e0, 0x00000002 },
+ { 0x000077e1, 0x00000002 },
+ { 0x000077e1, 0x00000006 },
+ { 0xffffffff, 0000000000 },
+ { 0x10000000, 0000000000 },
+ { 0x07f007f0, 0000000000 },
+ { 0x0003802a, 0x00000002 },
+ { 0x040067e0, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007675, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802b, 0x00000002 },
+ { 0x04002676, 0x00000002 },
+ { 0x00007677, 0x00000002 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0003802c, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002741, 0x00000002 },
+ { 0x04002743, 0x00000002 },
+ { 0x00007678, 0x00000006 },
+ { 0x0000002f, 0x00000018 },
+ { 0x0000002f, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x00000037, 0x00000018 },
+ { 0x00000037, 0x00000018 },
+ { 0000000000, 0x00000006 },
+ { 0x01605000, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00098000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x64c06051, 0x00000004 },
+ { 0x00080000, 0x00000016 },
+ { 0000000000, 0000000000 },
+ { 0x0400251d, 0x00000002 },
+ { 0x00007580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x04002580, 0x00000002 },
+ { 0x00067581, 0x00000002 },
+ { 0x0000005a, 0x00000004 },
+ { 0x00005000, 0000000000 },
+ { 0x00061000, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x00019000, 0x00000002 },
+ { 0x00011064, 0x00000014 },
+ { 0x00000064, 0x00000012 },
+ { 0x0400250f, 0x00000002 },
+ { 0x0000505e, 0x00000004 },
+ { 0x00007565, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000065, 0x00000004 },
+ { 0x01e655b4, 0x00000002 },
+ { 0x4401b0f0, 0x00000002 },
+ { 0x01c110f0, 0x00000002 },
+ { 0x26667071, 0x00000018 },
+ { 0x040c2565, 0x00000002 },
+ { 0x00000071, 0x00000018 },
+ { 0x04002564, 0x00000002 },
+ { 0x00007566, 0x00000002 },
+ { 0x00000068, 0x00000004 },
+ { 0x00401074, 0x00000008 },
+ { 0x00101000, 0x00000002 },
+ { 0x000d80ff, 0x00000002 },
+ { 0x00800077, 0x00000008 },
+ { 0x000f9000, 0x00000002 },
+ { 0x000e00ff, 0x00000002 },
+ { 0000000000, 0x00000006 },
+ { 0x00000094, 0x00000018 },
+ { 0x00000068, 0x00000004 },
+ { 0x00007576, 0x00000002 },
+ { 0x00065000, 0x00000002 },
+ { 0x00009000, 0x00000002 },
+ { 0x00041000, 0x00000002 },
+ { 0x0c00350e, 0x00000002 },
+ { 0x00049000, 0x00000002 },
+ { 0x00051000, 0x00000002 },
+ { 0x01e785f8, 0x00000002 },
+ { 0x00200000, 0x00000002 },
+ { 0x00600087, 0x0000000c },
+ { 0x00007563, 0x00000002 },
+ { 0x006075f0, 0x00000021 },
+ { 0x2000707c, 0x00000004 },
+ { 0x0000507c, 0x00000004 },
+ { 0x00007576, 0x00000002 },
+ { 0x00007577, 0x00000002 },
+ { 0x0000750e, 0x00000002 },
+ { 0x0000750f, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x0060008a, 0x0000000c },
+ { 0x006075f0, 0x00000021 },
+ { 0x000075f8, 0x00000002 },
+ { 0x0000008a, 0x00000004 },
+ { 0x000a750e, 0x00000002 },
+ { 0x0020750f, 0x00000002 },
+ { 0x0060008d, 0x00000004 },
+ { 0x00007570, 0x00000002 },
+ { 0x00007571, 0x00000002 },
+ { 0x00007572, 0x00000006 },
+ { 0x00005000, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00007568, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x00000098, 0x0000000c },
+ { 0x00058000, 0x00000002 },
+ { 0x0c607562, 0x00000002 },
+ { 0x0000009a, 0x00000004 },
+ { 0x00600099, 0x00000004 },
+ { 0x400070f1, 0000000000 },
+ { 0x000380f1, 0x00000002 },
+ { 0x000000a7, 0x0000001c },
+ { 0x000650a9, 0x00000018 },
+ { 0x040025bb, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x040075bc, 0000000000 },
+ { 0x000075bb, 0x00000002 },
+ { 0x000075bc, 0000000000 },
+ { 0x00090000, 0x00000006 },
+ { 0x00090000, 0x00000002 },
+ { 0x000d8002, 0x00000006 },
+ { 0x00005000, 0x00000002 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x00007821, 0x00000002 },
+ { 0x00007800, 0000000000 },
+ { 0x01665000, 0x00000002 },
+ { 0x000a0000, 0x00000002 },
+ { 0x000671cc, 0x00000002 },
+ { 0x0286f1cd, 0x00000002 },
+ { 0x000000b7, 0x00000010 },
+ { 0x21007000, 0000000000 },
+ { 0x000000be, 0x0000001c },
+ { 0x00065000, 0x00000002 },
+ { 0x000a0000, 0x00000002 },
+ { 0x00061000, 0x00000002 },
+ { 0x000b0000, 0x00000002 },
+ { 0x38067000, 0x00000002 },
+ { 0x000a00ba, 0x00000004 },
+ { 0x20007000, 0000000000 },
+ { 0x01200000, 0x00000002 },
+ { 0x20077000, 0x00000002 },
+ { 0x01200000, 0x00000002 },
+ { 0x20007000, 0000000000 },
+ { 0x00061000, 0x00000002 },
+ { 0x0120751b, 0x00000002 },
+ { 0x8040750a, 0x00000002 },
+ { 0x8040750b, 0x00000002 },
+ { 0x00110000, 0x00000002 },
+ { 0x000380f1, 0x00000002 },
+ { 0x000000d1, 0x0000001c },
+ { 0x000610aa, 0x00000018 },
+ { 0x844075bd, 0x00000002 },
+ { 0x000610a9, 0x00000018 },
+ { 0x840075bb, 0x00000002 },
+ { 0x000610aa, 0x00000018 },
+ { 0x844075bc, 0x00000002 },
+ { 0x000000d4, 0x00000004 },
+ { 0x804075bd, 0x00000002 },
+ { 0x800075bb, 0x00000002 },
+ { 0x804075bc, 0x00000002 },
+ { 0x00108000, 0x00000002 },
+ { 0x01400000, 0x00000002 },
+ { 0x006000d8, 0x0000000c },
+ { 0x20c07000, 0x00000020 },
+ { 0x000000da, 0x00000012 },
+ { 0x00800000, 0x00000006 },
+ { 0x0080751d, 0x00000006 },
+ { 0x000025bb, 0x00000002 },
+ { 0x000040d4, 0x00000004 },
+ { 0x0000775c, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460275d, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x00007999, 0x00000002 },
+ { 0x00a05000, 0x00000002 },
+ { 0x00661000, 0x00000002 },
+ { 0x0460299b, 0x00000020 },
+ { 0x00004000, 0000000000 },
+ { 0x01e00830, 0x00000002 },
+ { 0x21007000, 0000000000 },
+ { 0x00005000, 0x00000002 },
+ { 0x00038056, 0x00000002 },
+ { 0x040025e0, 0x00000002 },
+ { 0x000075e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000380ed, 0x00000002 },
+ { 0x04007394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000078c4, 0x00000002 },
+ { 0x000078c5, 0x00000002 },
+ { 0x000078c6, 0x00000002 },
+ { 0x00007924, 0x00000002 },
+ { 0x00007925, 0x00000002 },
+ { 0x00007926, 0x00000002 },
+ { 0x000000f2, 0x00000004 },
+ { 0x00007924, 0x00000002 },
+ { 0x00007925, 0x00000002 },
+ { 0x00007926, 0x00000002 },
+ { 0x000000f9, 0x00000004 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R300_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x000000ae, 0x00000008 },
+ { 0x000000b2, 0x00000008 },
+ { 0x67554b4a, 0000000000 },
+ { 0x4a4a4475, 0000000000 },
+ { 0x55527d83, 0000000000 },
+ { 0x4a8c8b65, 0000000000 },
+ { 0x4aef4af6, 0000000000 },
+ { 0x4ae14a4a, 0000000000 },
+ { 0xe4979797, 0000000000 },
+ { 0xdb4aebdd, 0000000000 },
+ { 0x9ccc4a4a, 0000000000 },
+ { 0xd1989898, 0000000000 },
+ { 0x4a0f9ad6, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000080, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00012000, 0x00000004 },
+ { 0x00082000, 0x00000004 },
+ { 0x1800650e, 0x00000004 },
+ { 0x00092000, 0x00000004 },
+ { 0x000a2000, 0x00000004 },
+ { 0x000f0000, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000074, 0x00000018 },
+ { 0x0000e563, 0x00000004 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0000a069, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000077, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000077, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0007a, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000084, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000086, 0x00000008 },
+ { 0x00c00085, 0x00000008 },
+ { 0x000700e3, 0x00000004 },
+ { 0x00000092, 0x00000038 },
+ { 0x000ca094, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x000000a4, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x000000a1, 0x00000008 },
+ { 0x000000a6, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x000000ad, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x001400a9, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700e3, 0x00000004 },
+ { 0x000000c0, 0x00000038 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2094, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2095, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000c3, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000c7, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000c9, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080c3, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700e0, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000e4, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000eb, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000f3, 0x00000034 },
+ { 0x000000f0, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R420_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x00000099, 0x00000008 },
+ { 0x0000009d, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0xd9d3dff6, 0000000000 },
+ { 0x4ac54a4a, 0000000000 },
+ { 0xc8828282, 0000000000 },
+ { 0xbf4acfc1, 0000000000 },
+ { 0x87b04a4a, 0000000000 },
+ { 0xb5838383, 0000000000 },
+ { 0x4a0f85ba, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700c7, 0x00000004 },
+ { 0x00000080, 0x00000038 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x0000008f, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x0000008c, 0x00000008 },
+ { 0x00000091, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x00000098, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x00140094, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700c7, 0x00000004 },
+ { 0x000000a4, 0x00000038 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000ab, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000ad, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080a7, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c4, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000c8, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cf, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000d7, 0x00000034 },
+ { 0x000000d4, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x0000e1cc, 0x00000004 },
+ { 0x0500e1cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000de, 0x00000034 },
+ { 0x000000da, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x0019e1cc, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x0500a000, 0x00000004 },
+ { 0x080041cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 RS600_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x000000a0, 0x00000008 },
+ { 0x000000a4, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0x4ae74af6, 0000000000 },
+ { 0x4ad34a4a, 0000000000 },
+ { 0xd6898989, 0000000000 },
+ { 0xcd4addcf, 0000000000 },
+ { 0x8ebe4ae2, 0000000000 },
+ { 0xc38a8a8a, 0000000000 },
+ { 0x4a0f8cc8, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700d5, 0x00000004 },
+ { 0x00000084, 0x00000038 },
+ { 0x000ca086, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000096, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x00000093, 0x00000008 },
+ { 0x00000098, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000009f, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x0014009b, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700d5, 0x00000004 },
+ { 0x000000b2, 0x00000038 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2086, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000b5, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000b9, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000bb, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080b5, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700d2, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000d6, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000dd, 0x00000008 },
+ { 0x00e00116, 0000000000 },
+ { 0x000700e1, 0x00000004 },
+ { 0x0800401c, 0x00000004 },
+ { 0x200050e7, 0x00000004 },
+ { 0x0000e01d, 0x00000004 },
+ { 0x000000e4, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000eb, 0x00000034 },
+ { 0x000000e8, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 RS690_cp_microcode[][2] = {
+ { 0x000000dd, 0x00000008 },
+ { 0x000000df, 0x00000008 },
+ { 0x000000a0, 0x00000008 },
+ { 0x000000a4, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0x4ad74af6, 0000000000 },
+ { 0x4ac94a4a, 0000000000 },
+ { 0xcc898989, 0000000000 },
+ { 0xc34ad3c5, 0000000000 },
+ { 0x8e4a4a4a, 0000000000 },
+ { 0x4a8a8a8a, 0000000000 },
+ { 0x4a0f8c4a, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000f041, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000f184, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000f185, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000f186, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000f187, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700cb, 0x00000004 },
+ { 0x00000084, 0x00000038 },
+ { 0x000ca086, 0x00000030 },
+ { 0x080045bb, 0x00000004 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0800e5bc, 0000000000 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x00120000, 0x0000000c },
+ { 0x00120000, 0x00000004 },
+ { 0x001b0002, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x00000096, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x00000093, 0x00000008 },
+ { 0x00000098, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000009f, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x0014009b, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x00100000, 0x0000002c },
+ { 0x00004000, 0000000000 },
+ { 0x080045c8, 0x00000004 },
+ { 0x00240005, 0x00000004 },
+ { 0x08004d0b, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700cb, 0x00000004 },
+ { 0x000000b7, 0x00000038 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bd, 0x00000005 },
+ { 0x000c2086, 0x00000030 },
+ { 0x0800e5bb, 0x00000005 },
+ { 0x000c2087, 0x00000030 },
+ { 0x0880e5bc, 0x00000005 },
+ { 0x000000ba, 0x00000008 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000be, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000c0, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080ba, 0x00000008 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c8, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cc, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000d3, 0x00000008 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000db, 0x00000034 },
+ { 0x000000d8, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x000000e1, 0x00000030 },
+ { 0x4200e000, 0000000000 },
+ { 0x000000e1, 0x00000030 },
+ { 0x4000e000, 0000000000 },
+ { 0x0025001b, 0x00000004 },
+ { 0x00230000, 0x00000004 },
+ { 0x00250005, 0x00000004 },
+ { 0x000000e6, 0x00000034 },
+ { 0000000000, 0x0000000c },
+ { 0x00244000, 0x00000004 },
+ { 0x080045c8, 0x00000004 },
+ { 0x00240005, 0x00000004 },
+ { 0x08004d0b, 0x0000000c },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+static const u32 R520_cp_microcode[][2] = {
+ { 0x4200e000, 0000000000 },
+ { 0x4000e000, 0000000000 },
+ { 0x00000099, 0x00000008 },
+ { 0x0000009d, 0x00000008 },
+ { 0x4a554b4a, 0000000000 },
+ { 0x4a4a4467, 0000000000 },
+ { 0x55526f75, 0000000000 },
+ { 0x4a7e7d65, 0000000000 },
+ { 0xe0dae6f6, 0000000000 },
+ { 0x4ac54a4a, 0000000000 },
+ { 0xc8828282, 0000000000 },
+ { 0xbf4acfc1, 0000000000 },
+ { 0x87b04ad5, 0000000000 },
+ { 0xb5838383, 0000000000 },
+ { 0x4a0f85ba, 0000000000 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000d0012, 0x00000038 },
+ { 0x0000e8b4, 0x00000004 },
+ { 0x000d0014, 0x00000038 },
+ { 0x0000e8b6, 0x00000004 },
+ { 0x000d0016, 0x00000038 },
+ { 0x0000e854, 0x00000004 },
+ { 0x000d0018, 0x00000038 },
+ { 0x0000e855, 0x00000004 },
+ { 0x000d001a, 0x00000038 },
+ { 0x0000e856, 0x00000004 },
+ { 0x000d001c, 0x00000038 },
+ { 0x0000e857, 0x00000004 },
+ { 0x000d001e, 0x00000038 },
+ { 0x0000e824, 0x00000004 },
+ { 0x000d0020, 0x00000038 },
+ { 0x0000e825, 0x00000004 },
+ { 0x000d0022, 0x00000038 },
+ { 0x0000e830, 0x00000004 },
+ { 0x000d0024, 0x00000038 },
+ { 0x0000f0c0, 0x00000004 },
+ { 0x000d0026, 0x00000038 },
+ { 0x0000f0c1, 0x00000004 },
+ { 0x000d0028, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002a, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002c, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d002e, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d0030, 0x00000038 },
+ { 0x0000e000, 0x00000004 },
+ { 0x000d0032, 0x00000038 },
+ { 0x0000f180, 0x00000004 },
+ { 0x000d0034, 0x00000038 },
+ { 0x0000f393, 0x00000004 },
+ { 0x000d0036, 0x00000038 },
+ { 0x0000f38a, 0x00000004 },
+ { 0x000d0038, 0x00000038 },
+ { 0x0000f38e, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000043, 0x00000018 },
+ { 0x00cce800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x08004800, 0x00000004 },
+ { 0x0000003a, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x2000451d, 0x00000004 },
+ { 0x0000e580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x08004580, 0x00000004 },
+ { 0x000ce581, 0x00000004 },
+ { 0x00000047, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x00032000, 0x00000004 },
+ { 0x00022051, 0x00000028 },
+ { 0x00000051, 0x00000024 },
+ { 0x0800450f, 0x00000004 },
+ { 0x0000a04b, 0x00000008 },
+ { 0x0000e565, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000052, 0x00000008 },
+ { 0x03cca5b4, 0x00000004 },
+ { 0x05432000, 0x00000004 },
+ { 0x00022000, 0x00000004 },
+ { 0x4ccce05e, 0x00000030 },
+ { 0x08274565, 0x00000004 },
+ { 0x0000005e, 0x00000030 },
+ { 0x08004564, 0x00000004 },
+ { 0x0000e566, 0x00000004 },
+ { 0x00000055, 0x00000008 },
+ { 0x00802061, 0x00000010 },
+ { 0x00202000, 0x00000004 },
+ { 0x001b00ff, 0x00000004 },
+ { 0x01000064, 0x00000010 },
+ { 0x001f2000, 0x00000004 },
+ { 0x001c00ff, 0x00000004 },
+ { 0000000000, 0x0000000c },
+ { 0x00000072, 0x00000030 },
+ { 0x00000055, 0x00000008 },
+ { 0x0000e576, 0x00000004 },
+ { 0x0000e577, 0x00000004 },
+ { 0x0000e50e, 0x00000004 },
+ { 0x0000e50f, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00000069, 0x00000018 },
+ { 0x00c0e5f9, 0x000000c2 },
+ { 0x00000069, 0x00000008 },
+ { 0x0014e50e, 0x00000004 },
+ { 0x0040e50f, 0x00000004 },
+ { 0x00c0006c, 0x00000008 },
+ { 0x0000e570, 0x00000004 },
+ { 0x0000e571, 0x00000004 },
+ { 0x0000e572, 0x0000000c },
+ { 0x0000a000, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x0000e568, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00000076, 0x00000018 },
+ { 0x000b0000, 0x00000004 },
+ { 0x18c0e562, 0x00000004 },
+ { 0x00000078, 0x00000008 },
+ { 0x00c00077, 0x00000008 },
+ { 0x000700c7, 0x00000004 },
+ { 0x00000080, 0x00000038 },
+ { 0x0000e5bb, 0x00000004 },
+ { 0x0000e5bc, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e800, 0000000000 },
+ { 0x0000e821, 0x00000004 },
+ { 0x0000e82e, 0000000000 },
+ { 0x02cca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000ce1cc, 0x00000004 },
+ { 0x050de1cd, 0x00000004 },
+ { 0x00400000, 0x00000004 },
+ { 0x0000008f, 0x00000018 },
+ { 0x00c0a000, 0x00000004 },
+ { 0x0000008c, 0x00000008 },
+ { 0x00000091, 0x00000020 },
+ { 0x4200e000, 0000000000 },
+ { 0x00000098, 0x00000038 },
+ { 0x000ca000, 0x00000004 },
+ { 0x00140000, 0x00000004 },
+ { 0x000c2000, 0x00000004 },
+ { 0x00160000, 0x00000004 },
+ { 0x700ce000, 0x00000004 },
+ { 0x00140094, 0x00000008 },
+ { 0x4000e000, 0000000000 },
+ { 0x02400000, 0x00000004 },
+ { 0x400ee000, 0x00000004 },
+ { 0x02400000, 0x00000004 },
+ { 0x4000e000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x0240e51b, 0x00000004 },
+ { 0x0080e50a, 0x00000005 },
+ { 0x0080e50b, 0x00000005 },
+ { 0x00220000, 0x00000004 },
+ { 0x000700c7, 0x00000004 },
+ { 0x000000a4, 0x00000038 },
+ { 0x0080e5bd, 0x00000005 },
+ { 0x0000e5bb, 0x00000005 },
+ { 0x0080e5bc, 0x00000005 },
+ { 0x00210000, 0x00000004 },
+ { 0x02800000, 0x00000004 },
+ { 0x00c000ab, 0x00000018 },
+ { 0x4180e000, 0x00000040 },
+ { 0x000000ad, 0x00000024 },
+ { 0x01000000, 0x0000000c },
+ { 0x0100e51d, 0x0000000c },
+ { 0x000045bb, 0x00000004 },
+ { 0x000080a7, 0x00000008 },
+ { 0x0000f3ce, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053cf, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f3d2, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c053d3, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x0000f39d, 0x00000004 },
+ { 0x0140a000, 0x00000004 },
+ { 0x00cc2000, 0x00000004 },
+ { 0x08c0539e, 0x00000040 },
+ { 0x00008000, 0000000000 },
+ { 0x03c00830, 0x00000004 },
+ { 0x4200e000, 0000000000 },
+ { 0x0000a000, 0x00000004 },
+ { 0x200045e0, 0x00000004 },
+ { 0x0000e5e1, 0000000000 },
+ { 0x00000001, 0000000000 },
+ { 0x000700c4, 0x00000004 },
+ { 0x0800e394, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x0000e8c4, 0x00000004 },
+ { 0x0000e8c5, 0x00000004 },
+ { 0x0000e8c6, 0x00000004 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000c8, 0x00000008 },
+ { 0x0000e928, 0x00000004 },
+ { 0x0000e929, 0x00000004 },
+ { 0x0000e92a, 0x00000004 },
+ { 0x000000cf, 0x00000008 },
+ { 0xdeadbeef, 0000000000 },
+ { 0x00000116, 0000000000 },
+ { 0x000700d3, 0x00000004 },
+ { 0x080050e7, 0x00000004 },
+ { 0x000700d4, 0x00000004 },
+ { 0x0800401c, 0x00000004 },
+ { 0x0000e01d, 0000000000 },
+ { 0x02c02000, 0x00000004 },
+ { 0x00060000, 0x00000004 },
+ { 0x000000de, 0x00000034 },
+ { 0x000000db, 0x00000008 },
+ { 0x00008000, 0x00000004 },
+ { 0xc000e000, 0000000000 },
+ { 0x0000e1cc, 0x00000004 },
+ { 0x0500e1cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000e5, 0x00000034 },
+ { 0x000000e1, 0x00000008 },
+ { 0x0000a000, 0000000000 },
+ { 0x0019e1cc, 0x00000004 },
+ { 0x001b0001, 0x00000004 },
+ { 0x0500a000, 0x00000004 },
+ { 0x080041cd, 0x00000004 },
+ { 0x000ca000, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0x000c2000, 0x00000004 },
+ { 0x001d0018, 0x00000004 },
+ { 0x001a0001, 0x00000004 },
+ { 0x000000fb, 0x00000034 },
+ { 0x0000004a, 0x00000008 },
+ { 0x0500a04a, 0x00000008 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+ { 0000000000, 0000000000 },
+};
+
+
+#endif
u32 height;
int i;
u32 texpitch, microtile;
- u32 offset;
+ u32 offset, byte_offset;
RING_LOCALS;
if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) {
} else
microtile = 0;
+ /* this might fail for zero-sized uploads - are those illegal? */
+ if (!radeon_check_offset(dev_priv, tex->offset + image->height *
+ blit_width - 1)) {
+ DRM_ERROR("Invalid final destination offset\n");
+ return -EINVAL;
+ }
+
DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width);
do {
}
#undef RADEON_COPY_MT
+ byte_offset = (image->y & ~2047) * blit_width;
buf->file_priv = file_priv;
buf->used = size;
offset = dev_priv->gart_buffers_offset + buf->offset;
RADEON_DP_SRC_SOURCE_MEMORY |
RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS);
OUT_RING((spitch << 22) | (offset >> 10));
- OUT_RING((texpitch << 22) | (tex->offset >> 10));
+ OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10)));
OUT_RING(0);
- OUT_RING((image->x << 16) | image->y);
+ OUT_RING((image->x << 16) | (image->y % 2048));
OUT_RING((image->width << 16) | height);
RADEON_WAIT_UNTIL_2D_IDLE();
ADVANCE_RING();
case RADEON_PARAM_FB_LOCATION:
value = radeon_read_fb_location(dev_priv);
break;
+ case RADEON_PARAM_NUM_GB_PIPES:
+ value = dev_priv->num_gb_pipes;
+ break;
default:
DRM_DEBUG("Invalid parameter %d\n", param->param);
return -EINVAL;
int __init nvram_init(void)
{
- printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n",
+ printk(KERN_INFO "Generic non-volatile memory driver v%s\n",
NVRAM_VERSION);
return misc_register(&nvram_dev);
}
if (mfc != INTEL_FWH_MANUFACTURER_CODE ||
(dvc != INTEL_FWH_DEVICE_CODE_8M &&
dvc != INTEL_FWH_DEVICE_CODE_4M)) {
- printk(KERN_ERR PFX "FWH not detected\n");
+ printk(KERN_NOTICE PFX "FWH not detected\n");
return -ENODEV;
}
static void k_self(struct vc_data *vc, unsigned char value, char up_flag)
{
- unsigned int uni;
- if (kbd->kbdmode == VC_UNICODE)
- uni = value;
- else
- uni = conv_8bit_to_uni(value);
- k_unicode(vc, uni, up_flag);
+ k_unicode(vc, conv_8bit_to_uni(value), up_flag);
}
static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag)
int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct tty_struct *real_tty;
unsigned long flags;
int retval;
- if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER)
- real_tty = tty->link;
- else
- real_tty = tty;
-
switch (cmd) {
case TCXONC:
retval = tty_check_change(tty);
int ret;
mutex_unlock(&cpufreq_governor_mutex);
- ret = request_module(name);
+ ret = request_module("%s", name);
mutex_lock(&cpufreq_governor_mutex);
if (ret == 0)
static void cpuidle_kick_cpus(void) {}
#endif
+static int __cpuidle_register_device(struct cpuidle_device *dev);
+
/**
* cpuidle_idle_call - the main idle loop
*
if (!dev->state_count)
return -EINVAL;
+ if (dev->registered == 0) {
+ ret = __cpuidle_register_device(dev);
+ if (ret)
+ return ret;
+ }
+
if ((ret = cpuidle_add_state_sysfs(dev)))
return ret;
#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
/**
- * cpuidle_register_device - registers a CPU's idle PM feature
+ * __cpuidle_register_device - internal register function called before register
+ * and enable routines
* @dev: the cpu
+ *
+ * cpuidle_lock mutex must be held before this is called
*/
-int cpuidle_register_device(struct cpuidle_device *dev)
+static int __cpuidle_register_device(struct cpuidle_device *dev)
{
int ret;
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
init_completion(&dev->kobj_unregister);
- mutex_lock(&cpuidle_lock);
-
poll_idle_init(dev);
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
if ((ret = cpuidle_add_sysfs(sys_dev))) {
- mutex_unlock(&cpuidle_lock);
module_put(cpuidle_curr_driver->owner);
return ret;
}
+ dev->registered = 1;
+ return 0;
+}
+
+/**
+ * cpuidle_register_device - registers a CPU's idle PM feature
+ * @dev: the cpu
+ */
+int cpuidle_register_device(struct cpuidle_device *dev)
+{
+ int ret;
+
+ mutex_lock(&cpuidle_lock);
+
+ if ((ret = __cpuidle_register_device(dev))) {
+ mutex_unlock(&cpuidle_lock);
+ return ret;
+ }
+
cpuidle_enable_device(dev);
cpuidle_install_idle_handler();
{
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
+ if (dev->registered == 0)
+ return;
+
cpuidle_pause_and_lock();
cpuidle_disable_device(dev);
-comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
+comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
depends on EXPERIMENTAL=n
+comment "Enable only one of the two stacks, unless you know what you are doing"
+ depends on EXPERIMENTAL
+
config FIREWIRE
- tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL"
+ tristate "New FireWire stack, EXPERIMENTAL"
depends on EXPERIMENTAL
select CRC_ITU_T
help
This is the "Juju" FireWire stack, a new alternative implementation
designed for robustness and simplicity. You can build either this
- stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
- or both. Please read http://wiki.linux1394.org/JujuMigration before
- you enable the new stack.
+ stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
+ Please read http://wiki.linux1394.org/JujuMigration before you
+ enable the new stack.
To compile this driver as a module, say M here: the module will be
called firewire-core. It functionally replaces ieee1394, raw1394,
and video1394.
- NOTE:
-
- You should only build ONE of the stacks, unless you REALLY know what
- you are doing.
-
config FIREWIRE_OHCI
- tristate "Support for OHCI FireWire host controllers"
+ tristate "OHCI-1394 controllers"
depends on PCI && FIREWIRE
help
Enable this driver if you have a FireWire controller based
called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394
stack.
- NOTE:
+ NOTE:
- You should only build ohci1394 or firewire-ohci, but not both.
- If you nevertheless want to install both, you should configure them
- only as modules and blacklist the driver(s) which you don't want to
- have auto-loaded. Add either
+ You should only build either firewire-ohci or the old ohci1394 driver,
+ but not both. If you nevertheless want to install both, you should
+ configure them only as modules and blacklist the driver(s) which you
+ don't want to have auto-loaded. Add either
blacklist firewire-ohci
or
default y
config FIREWIRE_SBP2
- tristate "Support for storage devices (SBP-2 protocol driver)"
+ tristate "Storage devices (SBP-2 protocol)"
depends on FIREWIRE && SCSI
help
This option enables you to use SBP-2 devices connected to a
return dequeue_event(client, buffer, count);
}
+/* caller must hold card->lock so that node pointers can be dereferenced here */
static void
fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
struct client *client)
event->closure = client->bus_reset_closure;
event->type = FW_CDEV_EVENT_BUS_RESET;
event->generation = client->device->generation;
- smp_rmb(); /* node_id must not be older than generation */
event->node_id = client->device->node_id;
event->local_node_id = card->local_node->node_id;
event->bm_node_id = 0; /* FIXME: We don't track the BM. */
{
struct fw_cdev_get_info *get_info = buffer;
struct fw_cdev_event_bus_reset bus_reset;
+ struct fw_card *card = client->device->card;
unsigned long ret = 0;
client->version = get_info->version;
client->bus_reset_closure = get_info->bus_reset_closure;
if (get_info->bus_reset != 0) {
void __user *uptr = u64_to_uptr(get_info->bus_reset);
+ unsigned long flags;
+ spin_lock_irqsave(&card->lock, flags);
fill_bus_reset_event(&bus_reset, client);
+ spin_unlock_irqrestore(&card->lock, flags);
+
if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset)))
return -EFAULT;
}
- get_info->card = client->device->card->index;
+ get_info->card = card->index;
return 0;
}
!(evt & OHCI1394_busReset))
return;
- printk(KERN_DEBUG KBUILD_MODNAME ": IRQ "
- "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
- evt,
- evt & OHCI1394_selfIDComplete ? " selfID" : "",
- evt & OHCI1394_RQPkt ? " AR_req" : "",
- evt & OHCI1394_RSPkt ? " AR_resp" : "",
- evt & OHCI1394_reqTxComplete ? " AT_req" : "",
- evt & OHCI1394_respTxComplete ? " AT_resp" : "",
- evt & OHCI1394_isochRx ? " IR" : "",
- evt & OHCI1394_isochTx ? " IT" : "",
- evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
- evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
- evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
- evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
- evt & OHCI1394_busReset ? " busReset" : "",
- evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
- OHCI1394_RSPkt | OHCI1394_reqTxComplete |
- OHCI1394_respTxComplete | OHCI1394_isochRx |
- OHCI1394_isochTx | OHCI1394_postedWriteErr |
- OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
- OHCI1394_regAccessFail | OHCI1394_busReset)
+ fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+ evt & OHCI1394_selfIDComplete ? " selfID" : "",
+ evt & OHCI1394_RQPkt ? " AR_req" : "",
+ evt & OHCI1394_RSPkt ? " AR_resp" : "",
+ evt & OHCI1394_reqTxComplete ? " AT_req" : "",
+ evt & OHCI1394_respTxComplete ? " AT_resp" : "",
+ evt & OHCI1394_isochRx ? " IR" : "",
+ evt & OHCI1394_isochTx ? " IT" : "",
+ evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
+ evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
+ evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
+ evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
+ evt & OHCI1394_busReset ? " busReset" : "",
+ evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
+ OHCI1394_RSPkt | OHCI1394_reqTxComplete |
+ OHCI1394_respTxComplete | OHCI1394_isochRx |
+ OHCI1394_isochTx | OHCI1394_postedWriteErr |
+ OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+ OHCI1394_regAccessFail | OHCI1394_busReset)
? " ?" : "");
}
if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS)))
return;
- printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, "
- "local node ID %04x\n", self_id_count, generation, node_id);
+ fw_notify("%d selfIDs, generation %d, local node ID %04x\n",
+ self_id_count, generation, node_id);
for (; self_id_count--; ++s)
if ((*s & 1 << 23) == 0)
- printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] "
- "%s gc=%d %s %s%s%s\n",
- *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
- speed[*s >> 14 & 3], *s >> 16 & 63,
- power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
- *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
+ fw_notify("selfID 0: %08x, phy %d [%c%c%c] "
+ "%s gc=%d %s %s%s%s\n",
+ *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
+ speed[*s >> 14 & 3], *s >> 16 & 63,
+ power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
+ *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
else
- printk(KERN_DEBUG "selfID n: %08x, phy %d "
- "[%c%c%c%c%c%c%c%c]\n",
- *s, *s >> 24 & 63,
- _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
- _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
+ fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n",
+ *s, *s >> 24 & 63,
+ _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
+ _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2));
}
static const char *evts[] = {
evt = 0x1f;
if (evt == OHCI1394_evt_bus_reset) {
- printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n",
- dir, (header[2] >> 16) & 0xff);
+ fw_notify("A%c evt_bus_reset, generation %d\n",
+ dir, (header[2] >> 16) & 0xff);
return;
}
if (header[0] == ~header[1]) {
- printk(KERN_DEBUG "A%c %s, %s, %08x\n",
- dir, evts[evt], phys[header[0] >> 30 & 0x3],
- header[0]);
+ fw_notify("A%c %s, %s, %08x\n",
+ dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]);
return;
}
switch (tcode) {
case 0xe: case 0xa:
- printk(KERN_DEBUG "A%c %s, %s\n",
- dir, evts[evt], tcodes[tcode]);
+ fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]);
break;
case 0x0: case 0x1: case 0x4: case 0x5: case 0x9:
- printk(KERN_DEBUG "A%c spd %x tl %02x, "
- "%04x -> %04x, %s, "
- "%s, %04x%08x%s\n",
- dir, speed, header[0] >> 10 & 0x3f,
- header[1] >> 16, header[0] >> 16, evts[evt],
- tcodes[tcode], header[1] & 0xffff, header[2], specific);
+ fw_notify("A%c spd %x tl %02x, "
+ "%04x -> %04x, %s, "
+ "%s, %04x%08x%s\n",
+ dir, speed, header[0] >> 10 & 0x3f,
+ header[1] >> 16, header[0] >> 16, evts[evt],
+ tcodes[tcode], header[1] & 0xffff, header[2], specific);
break;
default:
- printk(KERN_DEBUG "A%c spd %x tl %02x, "
- "%04x -> %04x, %s, "
- "%s%s\n",
- dir, speed, header[0] >> 10 & 0x3f,
- header[1] >> 16, header[0] >> 16, evts[evt],
- tcodes[tcode], specific);
+ fw_notify("A%c spd %x tl %02x, "
+ "%04x -> %04x, %s, "
+ "%s%s\n",
+ dir, speed, header[0] >> 10 & 0x3f,
+ header[1] >> 16, header[0] >> 16, evts[evt],
+ tcodes[tcode], specific);
}
}
p.header_length = 12;
p.payload_length = 0;
break;
+
+ default:
+ /* FIXME: Stop context, discard everything, and restart? */
+ p.header_length = 0;
+ p.payload_length = 0;
}
p.payload = (void *) buffer + p.header_length;
reg_write(ohci, OHCI1394_HCControlClear,
OHCI1394_HCControl_noByteSwapData);
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_LinkControlClear,
+ OHCI1394_LinkControl_rcvPhyPkt);
reg_write(ohci, OHCI1394_LinkControlSet,
OHCI1394_LinkControl_rcvSelfID |
OHCI1394_LinkControl_cycleTimerEnable |
ar_context_run(&ohci->ar_request_ctx);
ar_context_run(&ohci->ar_response_ctx);
- reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
reg_write(ohci, OHCI1394_IntEventClear, ~0);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
break;
case SBP2_CSR_LOGICAL_UNIT_DIRECTORY:
- if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0)
+ /* Adjust for the increment in the iterator */
+ if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0)
return -ENOMEM;
break;
}
#include <linux/completion.h>
#include <linux/kernel.h>
+#include <linux/kref.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
struct fw_phy_packet {
struct fw_packet packet;
struct completion done;
+ struct kref kref;
};
-static void
-transmit_phy_packet_callback(struct fw_packet *packet,
- struct fw_card *card, int status)
+static void phy_packet_release(struct kref *kref)
+{
+ struct fw_phy_packet *p =
+ container_of(kref, struct fw_phy_packet, kref);
+ kfree(p);
+}
+
+static void transmit_phy_packet_callback(struct fw_packet *packet,
+ struct fw_card *card, int status)
{
struct fw_phy_packet *p =
container_of(packet, struct fw_phy_packet, packet);
complete(&p->done);
+ kref_put(&p->kref, phy_packet_release);
}
void fw_send_phy_config(struct fw_card *card,
int node_id, int generation, int gap_count)
{
- struct fw_phy_packet p;
+ struct fw_phy_packet *p;
+ long timeout = DIV_ROUND_UP(HZ, 10);
u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
PHY_CONFIG_ROOT_ID(node_id) |
PHY_CONFIG_GAP_COUNT(gap_count);
- p.packet.header[0] = data;
- p.packet.header[1] = ~data;
- p.packet.header_length = 8;
- p.packet.payload_length = 0;
- p.packet.speed = SCODE_100;
- p.packet.generation = generation;
- p.packet.callback = transmit_phy_packet_callback;
- init_completion(&p.done);
-
- card->driver->send_request(card, &p.packet);
- wait_for_completion(&p.done);
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL)
+ return;
+
+ p->packet.header[0] = data;
+ p->packet.header[1] = ~data;
+ p->packet.header_length = 8;
+ p->packet.payload_length = 0;
+ p->packet.speed = SCODE_100;
+ p->packet.generation = generation;
+ p->packet.callback = transmit_phy_packet_callback;
+ init_completion(&p->done);
+ kref_set(&p->kref, 2);
+
+ card->driver->send_request(card, &p->packet);
+ timeout = wait_for_completion_timeout(&p->done, timeout);
+ kref_put(&p->kref, phy_packet_release);
+
+ /* will leak p if the callback is never executed */
+ WARN_ON(timeout == 0);
}
void fw_flush_transactions(struct fw_card *card)
break;
default:
- BUG();
+ fw_error("ERROR - corrupt request received - %08x %08x %08x\n",
+ p->header[0], p->header[1], p->header[2]);
return NULL;
}
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/dmi.h>
#include <asm/io.h>
/* uGuru3 bank addresses */
{ "AUX1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0013, "unknown", {
+ { 0x0013, "Abit AW8D", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX2 Fan", 36, 2, 60, 1, 0 },
{ "AUX3 Fan", 37, 2, 60, 1, 0 },
{ "AUX4 Fan", 38, 2, 60, 1, 0 },
+ { "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
{ 0x0014, "Abit AB9 Pro", {
{
/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
- at CMD instead, why is unknown. So we test for 0x05 too. */
+ or 0x55 at CMD instead, why is unknown. */
u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
if (((data_val == 0x00) || (data_val == 0x08)) &&
- ((cmd_val == 0xAC) || (cmd_val == 0x05)))
+ ((cmd_val == 0xAC) || (cmd_val == 0x05) ||
+ (cmd_val == 0x55)))
return ABIT_UGURU3_BASE;
ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
int address, err;
struct resource res = { .flags = IORESOURCE_IO };
+#ifdef CONFIG_DMI
+ const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+
+ /* safety check, refuse to load on non Abit motherboards */
+ if (!force && (!board_vendor ||
+ strcmp(board_vendor, "http://www.abit.com.tw/")))
+ return -ENODEV;
+#endif
+
address = abituguru3_detect();
if (address < 0)
return address;
ADT7473_REG_PWM_BHVR(i));
}
+ i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+ data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT);
+
data->limits_last_updated = local_jiffies;
data->limits_valid = 1;
the SMBus standard. */
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
+ int value;
+
if (reg == LM75_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
- else
- return swab16(i2c_smbus_read_word_data(client, reg));
+
+ value = i2c_smbus_read_word_data(client, reg);
+ return (value < 0) ? value : swab16(value);
}
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
int i;
dev_dbg(&client->dev, "Starting lm75 update\n");
- for (i = 0; i < ARRAY_SIZE(data->temp); i++)
- data->temp[i] = lm75_read_value(client,
- LM75_REG_TEMP[i]);
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ int status;
+
+ status = lm75_read_value(client, LM75_REG_TEMP[i]);
+ if (status < 0)
+ dev_dbg(&client->dev, "reg %d, err %d\n",
+ LM75_REG_TEMP[i], status);
+ else
+ data->temp[i] = status;
+ }
data->last_updated = jiffies;
data->valid = 1;
}
{
int i;
- if ( range < lm85_range_map[0] ) {
- return 0 ;
- } else if ( range > lm85_range_map[15] ) {
+ if (range >= lm85_range_map[15])
return 15 ;
- } else { /* find closest match */
- for ( i = 14 ; i >= 0 ; --i ) {
- if ( range > lm85_range_map[i] ) { /* range bracketed */
- if ((lm85_range_map[i+1] - range) <
- (range - lm85_range_map[i])) {
- i++;
- break;
- }
- break;
- }
+
+ /* Find the closest match */
+ for (i = 14; i >= 0; --i) {
+ if (range >= lm85_range_map[i]) {
+ if ((lm85_range_map[i + 1] - range) <
+ (range - lm85_range_map[i]))
+ return i + 1;
+ return i;
}
}
- return( i & 0x0f );
+
+ return 0;
}
#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
Say Y here if you want to support the Yellowstone RapIDE controller
manufactured for use with Acorn computers.
-config BLK_DEV_IDE_BAST
- tristate "Simtec BAST / Thorcom VR1000 IDE support"
- depends on ARM && (ARCH_BAST || MACH_VR1000)
- help
- Say Y here if you want to support the onboard IDE channels on the
- Simtec BAST or the Thorcom VR1000
-
config IDE_H8300
tristate "H8300 IDE support"
depends on H8300
config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
+ depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
help
There are two drivers for MFM/RLL/IDE hard disks. Most people use
the newer enhanced driver, but this old one is still around for two
obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
-obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o
obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o
ifeq ($(CONFIG_IDE_ARM), m)
+++ /dev/null
-/*
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-#define DRV_NAME "bast-ide"
-
-static int __init bastide_register(unsigned int base, unsigned int aux, int irq)
-{
- ide_hwif_t *hwif;
- hw_regs_t hw;
- int i;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-
- memset(&hw, 0, sizeof(hw));
-
- base += BAST_IDE_CS;
- aux += BAST_IDE_CS;
-
- for (i = 0; i <= 7; i++) {
- hw.io_ports_array[i] = (unsigned long)base;
- base += 0x20;
- }
-
- hw.io_ports.ctl_addr = aux + (6 * 0x20);
- hw.irq = irq;
-
- hwif = ide_find_port();
- if (hwif == NULL)
- goto out;
-
- i = hwif->index;
-
- ide_init_port_data(hwif, i);
- ide_init_port_hw(hwif, &hw);
- hwif->port_ops = NULL;
-
- idx[0] = i;
-
- ide_device_add(idx, NULL);
-out:
- return 0;
-}
-
-static int __init bastide_init(void)
-{
- unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS;
-
- /* we can treat the VR1000 and the BAST the same */
-
- if (!(machine_is_bast() || machine_is_vr1000()))
- return 0;
-
- printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n");
-
- if (!request_mem_region(base, 0x400000, DRV_NAME)) {
- printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
- return -EBUSY;
- }
-
- bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0);
- bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1);
-
- return 0;
-}
-
-module_init(bastide_init);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver");
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = IDE_ARM_IRQ;
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
struct clk *clkp;
struct resource *mem, *irq;
ide_hwif_t *hwif;
- void __iomem *base;
- int pribase, i;
+ unsigned long base;
+ int i;
hw_regs_t hw;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
printk(KERN_ERR "failed to get memory region resource\n");
return -ENODEV;
}
+
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq == NULL) {
printk(KERN_ERR "failed to get IRQ resource\n");
return -ENODEV;
}
- base = (void *)mem->start;
+ if (request_mem_region(mem->start, mem->end - mem->start + 1,
+ "palm_bk3710") == NULL) {
+ printk(KERN_ERR "failed to request memory region\n");
+ return -EBUSY;
+ }
+
+ base = IO_ADDRESS(mem->start);
/* Configure the Palm Chip controller */
- palm_bk3710_chipinit(base);
+ palm_bk3710_chipinit((void __iomem *)base);
- pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
for (i = 0; i < IDE_NR_PORTS - 2; i++)
- hw.io_ports_array[i] = pribase + i;
- hw.io_ports.ctl_addr = mem->start +
- IDE_PALM_ATA_PRI_CTL_OFFSET;
+ hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+ hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
hw.irq = irq->start;
hw.chipset = ide_palm3710;
ide_device_add(idx, &palm_bk3710_port_info);
- if (!hwif->present)
- goto out;
-
return 0;
out:
printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
module_init(palm_bk3710_init);
MODULE_LICENSE("GPL");
-
#define DRV_NAME "ide_generic"
+static int probe_mask = 0x03;
+module_param(probe_mask, int, 0);
+MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
+
static ssize_t store_add(struct class *cls, const char *buf, size_t n)
{
ide_hwif_t *hwif;
u8 idx[MAX_HWIFS];
int i;
+ printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
+ "parameter for probing all legacy ISA IDE ports\n");
+
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif;
unsigned long io_addr = ide_default_io_base(i);
idx[i] = 0xff;
- if (io_addr) {
+ if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
"not free.\n",
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
hw.irq = ide_default_irq(io_addr);
+ hw.chipset = ide_generic;
ide_init_port_hw(hwif, &hw);
idx[i] = i;
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = pnp_irq(dev, 0);
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
const struct ide_port_info *d)
{
- if (d->chipset != ide_etrax100)
- hwif->channel = port;
+ hwif->channel = port;
if (d->chipset)
hwif->chipset = d->chipset;
continue;
}
- if (d->chipset != ide_etrax100 && (i & 1) && mate) {
+ if ((i & 1) && mate) {
hwif->mate = mate;
mate->mate = hwif;
}
ide_std_init_ports(hw, base, ctl);
hw->irq = irq;
+ hw->chipset = d->chipset;
hwif = ide_find_port_slot(d);
if (hwif) {
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
case ide_palm3710: name = "palm3710"; break;
- case ide_etrax100: name = "etrax100"; break;
case ide_acorn: name = "acorn"; break;
default: name = "(unknown)"; break;
}
u8 stat;
/*
- * Last sector was transfered, wait until drive is ready.
- * This can take up to 10 usec, but we will wait max 1 ms.
+ * Last sector was transfered, wait until device is ready. This can
+ * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
*/
- for (retries = 0; retries < 100; retries++) {
+ for (retries = 0; retries < 1000; retries++) {
stat = ide_read_status(drive);
if (stat & BUSY_STAT)
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
hw->irq = IRQ_MFP_IDE;
hw->ack_intr = NULL;
+
+ hw->chipset = ide_generic;
}
/*
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
+
int ide_doubler = 0; /* support IDE doublers? */
+EXPORT_SYMBOL_GPL(ide_doubler);
+
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
{
ide_info_t *info = link->priv;
ide_hwif_t *hwif = info->hwif;
+ unsigned long data_addr, ctl_addr;
DEBUG(0, "ide_detach(0x%p)\n", link);
+ data_addr = hwif->io_ports.data_addr;
+ ctl_addr = hwif->io_ports.ctl_addr;
+
ide_release(link);
- release_region(hwif->io_ports.ctl_addr, 1);
- release_region(hwif->io_ports.data_addr, 8);
+ release_region(ctl_addr, 1);
+ release_region(data_addr, 8);
kfree(info);
} /* ide_detach */
if (hwif->present)
return hwif;
+ /* retry registration in case device is still spinning up */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ ide_port_scan(hwif);
+ if (hwif->present)
+ return hwif;
+ }
+
+ return hwif;
+
out_release:
release_region(ctl, 1);
release_region(io, 8);
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int i, pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
ide_hwif_t *hwif;
if (is_kme)
outb(0x81, ctl_base+1);
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
- if (hwif)
- break;
- if (link->io.NumPorts1 == 0x20) {
+ hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ if (hwif == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
- if (hwif) {
- io_base += 0x10;
- ctl_base += 0x10;
- break;
- }
- }
- msleep(100);
}
- if (hwif == NULL) {
- printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
- ", irq %u failed\n", io_base, ctl_base,
- link->irq.AssignedIRQ);
+ if (hwif == NULL)
goto failed;
- }
info->ndev = 1;
sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
+ PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static const char *mac_ide_name[] =
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
+ hw[0].chipset = ide_cmd640;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
+ hw[1].chipset = ide_cmd640;
printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
"\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
.quirkproc = ide_undecoded_slave,
};
+static const struct ide_port_info delkin_cb_port_info = {
+ .port_ops = &delkin_cb_port_ops,
+ .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
+ IDE_HFLAG_NO_DMA,
+};
+
static int __devinit
delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned long base;
hw_regs_t hw;
ide_hwif_t *hwif = NULL;
- ide_drive_t *drive;
int i, rc;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
hw.irq = dev->irq;
+ hw.dev = &dev->dev;
hw.chipset = ide_pci; /* this enables IRQ sharing */
hwif = ide_find_port();
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
- hwif->port_ops = &delkin_cb_port_ops;
idx[0] = i;
- ide_device_add(idx, NULL);
-
- if (!hwif->present)
- goto out_disable;
+ ide_device_add(idx, &delkin_cb_port_info);
pci_set_drvdata(dev, hwif);
- hwif->dev = &dev->dev;
- drive = &hwif->drives[0];
- if (drive->present) {
- drive->io_32bit = 1;
- drive->unmask = 1;
- }
+
return 0;
out_disable:
- printk(KERN_ERR "delkin_cb: no IDE devices found\n");
pci_release_regions(dev);
pci_disable_device(dev);
return -ENODEV;
.remove = delkin_cb_remove,
};
-static int
-delkin_cb_init (void)
+static int __init delkin_cb_init(void)
{
return pci_register_driver(&driver);
}
-static void
-delkin_cb_exit (void)
+static void __exit delkin_cb_exit(void)
{
pci_unregister_driver(&driver);
}
* 0.5 doesn't work.
*/
-#define OPTI621_DEBUG /* define for debug messages */
-
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/io.h>
-//#define OPTI621_MAX_PIO 3
-/* In fact, I do not have any PIO 4 drive
- * (address: 25 ns, data: 70 ns, recovery: 35 ns),
- * but OPTi 82C621 is programmable and it can do (minimal values):
- * on 40MHz PCI bus (pulse 25 ns):
- * address: 25 ns, data: 25 ns, recovery: 50 ns;
- * on 20MHz PCI bus (pulse 50 ns):
- * address: 50 ns, data: 50 ns, recovery: 100 ns.
- */
-
-/* #define READ_PREFETCH 0 */
-/* Uncomment for disable read prefetch.
- * There is some readprefetch capatibility in hdparm,
- * but when I type hdparm -P 1 /dev/hda, I got errors
- * and till reset drive is inaccessible.
- * This (hw) read prefetch is safe on my drive.
- */
-
-#ifndef READ_PREFETCH
-#define READ_PREFETCH 0x40 /* read prefetch is enabled */
-#endif /* else read prefetch is disabled */
-
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
static int reg_base;
-#define PIO_NOT_EXIST 254
-#define PIO_DONT_KNOW 255
-
static DEFINE_SPINLOCK(opti621_lock);
-/* there are stored pio numbers from other calls of opti621_set_pio_mode */
-static void compute_pios(ide_drive_t *drive, const u8 pio)
-/* Store values into drive->drive_data
- * second_contr - 0 for primary controller, 1 for secondary
- * slave_drive - 0 -> pio is for master, 1 -> pio is for slave
- * pio - PIO mode for selected drive (for other we don't know)
- */
-{
- int d;
- ide_hwif_t *hwif = HWIF(drive);
-
- drive->drive_data = pio;
-
- for (d = 0; d < 2; ++d) {
- drive = &hwif->drives[d];
- if (drive->present) {
- if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
-#ifdef OPTI621_DEBUG
- printk("%s: Selected PIO mode %d\n",
- drive->name, drive->drive_data);
-#endif
- } else {
- drive->drive_data = PIO_NOT_EXIST;
- }
- }
-}
-
-static int cmpt_clk(int time, int bus_speed)
-/* Returns (rounded up) time in clocks for time in ns,
- * with bus_speed in MHz.
- * Example: bus_speed = 40 MHz, time = 80 ns
- * 1000/40 = 25 ns (clk value),
- * 80/25 = 3.2, rounded up to 4 (I hope ;-)).
- * Use idebus=xx to select right frequency.
- */
-{
- return ((time*bus_speed+999)/1000);
-}
-
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
return ret;
}
-typedef struct pio_clocks_s {
- int address_time; /* Address setup (clocks) */
- int data_time; /* Active/data pulse (clocks) */
- int recovery_time; /* Recovery time (clocks) */
-} pio_clocks_t;
-
-static void compute_clocks(int pio, pio_clocks_t *clks)
-{
- if (pio != PIO_NOT_EXIST) {
- int adr_setup, data_pls;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
-
- adr_setup = ide_pio_timings[pio].setup_time;
- data_pls = ide_pio_timings[pio].active_time;
- clks->address_time = cmpt_clk(adr_setup, bus_speed);
- clks->data_time = cmpt_clk(data_pls, bus_speed);
- clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
- - adr_setup-data_pls, bus_speed);
- if (clks->address_time < 1)
- clks->address_time = 1;
- if (clks->address_time > 4)
- clks->address_time = 4;
- if (clks->data_time < 1)
- clks->data_time = 1;
- if (clks->data_time > 16)
- clks->data_time = 16;
- if (clks->recovery_time < 2)
- clks->recovery_time = 2;
- if (clks->recovery_time > 17)
- clks->recovery_time = 17;
- } else {
- clks->address_time = 1;
- clks->data_time = 1;
- clks->recovery_time = 2;
- /* minimal values */
- }
-}
-
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- /* primary and secondary drives share some registers,
- * so we have to program both drives
- */
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *pair = ide_get_paired_drive(drive);
unsigned long flags;
- u8 pio1 = 0, pio2 = 0;
- pio_clocks_t first, second;
- int ax, drdy;
- u8 cycle1, cycle2, misc;
- ide_hwif_t *hwif = HWIF(drive);
-
- /* sets drive->drive_data for both drives */
- compute_pios(drive, pio);
- pio1 = hwif->drives[0].drive_data;
- pio2 = hwif->drives[1].drive_data;
-
- compute_clocks(pio1, &first);
- compute_clocks(pio2, &second);
-
- /* ax = max(a1,a2) */
- ax = (first.address_time < second.address_time) ? second.address_time : first.address_time;
-
- drdy = 2; /* DRDY is default 2 (by OPTi Databook) */
-
- cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2);
- cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2);
- misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1);
-
-#ifdef OPTI621_DEBUG
- printk("%s: master: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, first.data_time,
- first.recovery_time, drdy);
- printk("%s: slave: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, second.data_time,
- second.recovery_time, drdy);
-#endif
+ u8 tim, misc, addr_pio = pio, clk;
+
+ /* DRDY is default 2 (by OPTi Databook) */
+ static const u8 addr_timings[2][5] = {
+ { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
+ { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
+ };
+ static const u8 data_rec_timings[2][5] = {
+ { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
+ { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
+ };
+
+ drive->drive_data = XFER_PIO_0 + pio;
+
+ if (pair->present) {
+ if (pair->drive_data && pair->drive_data < drive->drive_data)
+ addr_pio = pair->drive_data - XFER_PIO_0;
+ }
spin_lock_irqsave(&opti621_lock, flags);
(void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
read_reg(CNTRL_REG);
- /* read version, probably 0 */
- read_reg(STRAP_REG);
- /* program primary drive */
- /* select Index-0 for Register-A */
- write_reg(0, MISC_REG);
- /* set read cycle timings */
- write_reg(cycle1, READ_REG);
- /* set write cycle timings */
- write_reg(cycle1, WRITE_REG);
+ /* check CLK speed */
+ clk = read_reg(STRAP_REG) & 1;
+
+ printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
- /* program secondary drive */
- /* select Index-1 for Register-B */
- write_reg(1, MISC_REG);
+ tim = data_rec_timings[clk][pio];
+ misc = addr_timings[clk][addr_pio];
+
+ /* select Index-0/1 for Register-A/B */
+ write_reg(drive->select.b.unit, MISC_REG);
/* set read cycle timings */
- write_reg(cycle2, READ_REG);
+ write_reg(tim, READ_REG);
/* set write cycle timings */
- write_reg(cycle2, WRITE_REG);
+ write_reg(tim, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
spin_unlock_irqrestore(&opti621_lock, flags);
}
-static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
-{
- hwif->drives[0].drive_data = PIO_DONT_KNOW;
- hwif->drives[1].drive_data = PIO_DONT_KNOW;
-}
-
static const struct ide_port_ops opti621_port_ops = {
- .port_init_devs = opti621_port_init_devs,
.set_pio_mode = opti621_set_pio_mode,
};
-static const struct ide_port_info opti621_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "OPTI621",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }, { /* 1 */
- .name = "OPTI621X",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }
+static const struct ide_port_info opti621_chipset __devinitdata = {
+ .name = "OPTI621/X",
+ .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
+ .port_ops = &opti621_port_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO4,
};
static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]);
+ return ide_setup_pci_device(dev, &opti621_chipset);
}
static const struct pci_device_id opti621_pci_tbl[] = {
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 },
+ { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
{
struct ide_port_info d = sis5513_chipset;
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
if (sis_find_family(dev) == 0)
return -ENOTSUPP;
pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
#endif /* CONFIG_IDE_8xx_PCCARD */
+ hw->chipset = ide_generic;
+
return 0;
}
#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
(0x80000000 >> ioport_dsc[data_port].irq);
+ hw->chipset = ide_generic;
+
return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
int irq;
int kind;
int aapl_bus_id;
- unsigned cable_80 : 1;
unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
return 0;
}
+static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif);
+ struct device_node *np = pmif->node;
+ const char *cable = of_get_property(np, "cable-type", NULL);
+
+ /* Get cable type from device-tree. */
+ if (cable && !strncmp(cable, "80-", 3))
+ return ATA_CBL_PATA80;
+
+ /*
+ * G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they have a 80 conductor cable, this seem
+ * to be always the case unless the user mucked around.
+ */
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ return ATA_CBL_PATA40;
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
+};
+
+static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .set_pio_mode = pmac_ide_set_pio_mode,
+ .set_dma_mode = pmac_ide_set_dma_mode,
+ .selectproc = pmac_ide_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
};
static const struct ide_port_ops pmac_ide_port_ops = {
/*
* Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI). Note that a channel
- * that ends up beeing free of any device is not kept around by this driver
- * (it is kept in 2.4). This introduce an interface numbering change on some
- * rare machines unfortunately, but it's better this way.
+ * called by one of the 2 probe functions (macio or PCI).
*/
static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
struct ide_port_info d = pmac_port_info;
- pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA4;
} else
pmif->kind = controller_kl_ata3;
bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
- /* Get cable type from device-tree */
- if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6) {
- const char* cable = of_get_property(np, "cable-type", NULL);
- if (cable && !strncmp(cable, "80-", 3))
- pmif->cable_80 = 1;
- }
- /* G5's seem to have incorrect cable type in device-tree. Let's assume
- * they have a 80 conductor cable, this seem to be always the case unless
- * the user mucked around
- */
- if (of_device_is_compatible(np, "K2-UATA") ||
- of_device_is_compatible(np, "shasta-ata"))
- pmif->cable_80 = 1;
-
/* On Kauai-type controllers, we make sure the FCR is correct */
if (pmif->kauai_fcr)
writel(KAUAI_FCR_UATA_MAGIC |
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
- hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
}
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- if (pmif->cable_80 == 0)
- d.udma_mask &= ATA_UDMA2;
-#endif
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
source "drivers/firewire/Kconfig"
config IEEE1394
- tristate "IEEE 1394 (FireWire) support"
+ tristate "Stable FireWire stack"
depends on PCI || BROKEN
help
IEEE 1394 describes a high performance serial bus, which is also
To compile this driver as a module, say M here: the
module will be called ieee1394.
-comment "Subsystem Options"
- depends on IEEE1394
-
-config IEEE1394_VERBOSEDEBUG
- bool "Excessive debugging output"
- depends on IEEE1394
+config IEEE1394_OHCI1394
+ tristate "OHCI-1394 controllers"
+ depends on PCI && IEEE1394
help
- If you say Y here, you will get very verbose debugging logs from
- the subsystem which includes a dump of the header of every sent
- and received packet. This can amount to a high amount of data
- collected in a very short time which is usually also saved to
- disk by the system logging daemons.
+ Enable this driver if you have an IEEE 1394 controller based on the
+ OHCI-1394 specification. The current driver is only tested with OHCI
+ chipsets made by Texas Instruments and NEC. Most third-party vendors
+ use one of these chipsets. It should work with any OHCI-1394
+ compliant card, however.
- Say Y if you really want or need the debugging output, everyone
- else says N.
+ To compile this driver as a module, say M here: the
+ module will be called ohci1394.
-comment "Controllers"
- depends on IEEE1394
+ NOTE:
-comment "Texas Instruments PCILynx requires I2C"
+ You should only build either ohci1394 or the new firewire-ohci driver,
+ but not both. If you nevertheless want to install both, you should
+ configure them only as modules and blacklist the driver(s) which you
+ don't want to have auto-loaded. Add either
+
+ blacklist firewire-ohci
+ or
+ blacklist ohci1394
+ blacklist video1394
+ blacklist dv1394
+
+ to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+ depending on your distribution. The latter two modules should be
+ blacklisted together with ohci1394 because they depend on ohci1394.
+
+ If you have an old modprobe which doesn't implement the blacklist
+ directive, use "install modulename /bin/true" for the modules to be
+ blacklisted.
+
+comment "PCILynx controller requires I2C"
depends on IEEE1394 && I2C=n
config IEEE1394_PCILYNX
- tristate "Texas Instruments PCILynx support"
+ tristate "PCILynx controller"
depends on PCI && IEEE1394 && I2C
select I2C_ALGOBIT
help
PowerMacs G3 B&W contain the PCILynx controller. Therefore
almost everybody can say N here.
-config IEEE1394_OHCI1394
- tristate "OHCI-1394 support"
- depends on PCI && IEEE1394
- help
- Enable this driver if you have an IEEE 1394 controller based on the
- OHCI-1394 specification. The current driver is only tested with OHCI
- chipsets made by Texas Instruments and NEC. Most third-party vendors
- use one of these chipsets. It should work with any OHCI-1394
- compliant card, however.
-
- To compile this driver as a module, say M here: the
- module will be called ohci1394.
-
-comment "Protocols"
- depends on IEEE1394
-
-config IEEE1394_VIDEO1394
- tristate "OHCI-1394 Video support"
- depends on IEEE1394 && IEEE1394_OHCI1394
- help
- This option enables video device usage for OHCI-1394 cards. Enable
- this option only if you have an IEEE 1394 video device connected to
- an OHCI-1394 card.
-
comment "SBP-2 support (for storage devices) requires SCSI"
depends on IEEE1394 && SCSI=n
config IEEE1394_SBP2
- tristate "SBP-2 support (Harddisks etc.)"
+ tristate "Storage devices (SBP-2 protocol)"
depends on IEEE1394 && SCSI
help
This option enables you to use SBP-2 devices connected to an IEEE
The module is called eth1394 although it does not emulate Ethernet.
+config IEEE1394_RAWIO
+ tristate "raw1394 userspace interface"
+ depends on IEEE1394
+ help
+ This option adds support for the raw1394 device file which enables
+ direct communication of user programs with IEEE 1394 devices
+ (isochronous and asynchronous). Almost all application programs
+ which access FireWire require this option.
+
+ To compile this driver as a module, say M here: the module will be
+ called raw1394.
+
+config IEEE1394_VIDEO1394
+ tristate "video1394 userspace interface"
+ depends on IEEE1394 && IEEE1394_OHCI1394
+ help
+ This option adds support for the video1394 device files which enable
+ isochronous communication of user programs with IEEE 1394 devices,
+ especially video capture or export. This interface is used by all
+ libdc1394 based programs and by several other programs, in addition to
+ the raw1394 interface. It is generally not required for DV capture.
+
+ To compile this driver as a module, say M here: the module will be
+ called video1394.
+
config IEEE1394_DV1394
- tristate "OHCI-DV I/O support (deprecated)"
+ tristate "dv1394 userspace interface (deprecated)"
depends on IEEE1394 && IEEE1394_OHCI1394
help
The dv1394 driver is unsupported and may be removed from Linux in a
future release. Its functionality is now provided by raw1394 together
with libraries such as libiec61883.
-config IEEE1394_RAWIO
- tristate "Raw IEEE1394 I/O support"
+config IEEE1394_VERBOSEDEBUG
+ bool "Excessive debugging output"
depends on IEEE1394
help
- This option adds support for the raw1394 device file which enables
- direct communication of user programs with the IEEE 1394 bus and thus
- with the attached peripherals. Almost all application programs which
- access FireWire require this option.
+ If you say Y here, you will get very verbose debugging logs from the
+ ieee1394 drivers, including sent and received packet headers. This
+ will quickly result in large amounts of data sent to the system log.
- To compile this driver as a module, say M here: the module will be
- called raw1394.
+ Say Y if you really need the debugging output. Everyone else says N.
endmenu
ret = 0;
while (npages) {
ret = get_user_pages(current, current->mm, cur_base,
- min_t(int, npages,
+ min_t(unsigned long, npages,
PAGE_SIZE / sizeof (struct page *)),
1, !umem->writable, page_list, vma_list);
unsigned long flags;
spin_lock_irqsave(&file->async_file->lock, flags);
- if (!file->async_file->is_closed) {
+ if (file->async_file->is_closed) {
spin_unlock_irqrestore(&file->async_file->lock, flags);
return;
}
IB_DEVICE_CURR_QP_STATE_MOD |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_ZERO_STAG |
- IB_DEVICE_MEM_WINDOW |
- IB_DEVICE_SEND_W_INV);
+ IB_DEVICE_MEM_WINDOW);
/* Allocate the qptr_array */
c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *));
{
struct page *page;
- page = alloc_pages(gfp_mask, order);
+ /*
+ * Use __GFP_ZERO because buggy firmware assumes ICM pages are
+ * cleared, and subtle failures are seen if they aren't.
+ */
+ page = alloc_pages(gfp_mask | __GFP_ZERO, order);
if (!page)
return -ENOMEM;
if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length)
goto enough_pages;
if ((page_count&0x01FF) == 0) {
- if (page_count>(1024*512)) {
+ if (page_count >= 1024 * 512) {
ib_umem_release(region);
- pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase,
- vpbl.pbl_pbase);
nes_free_resource(nesadapter,
nesadapter->allocated_mrs, stag_index);
kfree(nesmr);
config INPUT_PCSPKR
tristate "PC Speaker support"
depends on PCSPKR_PLATFORM
- depends on SND_PCSP=n
help
Say Y here if you want the standard PC Speaker to be used for
bells and whistles.
dev->open = 0;
}
+static int atp_handle_geyser(struct atp *dev)
+{
+ struct usb_device *udev = dev->udev;
+
+ if (!atp_is_fountain(dev)) {
+ /* switch to raw sensor mode */
+ if (atp_geyser_init(udev))
+ return -EIO;
+
+ printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+ }
+
+ return 0;
+}
+
static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
struct atp *dev;
else
dev->datalen = 81;
- if (!atp_is_fountain(dev)) {
- /* switch to raw sensor mode */
- if (atp_geyser_init(udev))
- goto err_free_devs;
-
- printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
- }
-
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb)
goto err_free_devs;
usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, dev->datalen, atp_complete, dev, 1);
+ error = atp_handle_geyser(dev);
+ if (error)
+ goto err_free_buffer;
+
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
printk(KERN_INFO "input: appletouch disconnected\n");
}
+static int atp_recover(struct atp *dev)
+{
+ int error;
+
+ error = atp_handle_geyser(dev);
+ if (error)
+ return error;
+
+ if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ return 0;
+}
+
static int atp_suspend(struct usb_interface *iface, pm_message_t message)
{
struct atp *dev = usb_get_intfdata(iface);
return 0;
}
+static int atp_reset_resume(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+
+ return atp_recover(dev);
+}
+
static struct usb_driver atp_driver = {
.name = "appletouch",
.probe = atp_probe,
.disconnect = atp_disconnect,
.suspend = atp_suspend,
.resume = atp_resume,
+ .reset_resume = atp_reset_resume,
.id_table = atp_table,
};
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
},
},
+ {
+ .ident = "Fujitsu-Siemens Amilo Pro 2030",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
{
/*
* No data is coming from the touchscreen unless KBC
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042: Can't write CTR to resume\n");
- return -EIO;
+ printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+ msleep(50);
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ printk(KERN_ERR "i8042: CTR write retry failed\n");
+ return -EIO;
+ }
}
if (!create_divas_proc()) {
#ifdef MODULE
- remove_divas_proc();
divas_unregister_chrdev();
divasfunc_exit();
#endif
int create_divas_proc(void)
{
- proc_create(divas_proc_name, S_IFREG | S_IRUGO, proc_net_eicon,
- &divas_fops);
+ divas_proc_entry = proc_create(divas_proc_name, S_IFREG | S_IRUGO,
+ proc_net_eicon, &divas_fops);
if (!divas_proc_entry)
return (0);
/* read conf file -> output card info data */
/*******************************************/
static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off)
+hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
{
char *cp;
- int i;
- if (file->f_mode & FMODE_READ) {
- if (!(cp = file->private_data))
- return (-EFAULT); /* should never happen */
- i = strlen(cp); /* get total string length */
- if (*off < i) {
- /* still bytes to transfer */
- cp += *off; /* point to desired data offset */
- i -= *off; /* remaining length */
- if (i > count)
- i = count; /* limit length to transfer */
- if (copy_to_user(buf, cp, i))
- return (-EFAULT); /* copy error */
- *off += i; /* adjust offset */
- } else
- return (0);
- } else
- return (-EPERM); /* no permission to read */
-
- return (i);
+ if (!(file->f_mode & FMODE_READ))
+ return -EPERM; /* no permission to read */
+
+ if (!(cp = file->private_data))
+ return -EFAULT; /* should never happen */
+
+ return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
} /* hysdn_conf_read */
/******************/
*/
if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) {
kfree(rcvmsg);
+ kfree(spid);
return -EFAULT;
}
* we set it now, so we can trap and pass that trap to the Guest if it
* uses the FPU. */
if (cpu->ts)
- lguest_set_ts();
+ unlazy_fpu(current);
/* SYSENTER is an optimized way of doing system calls. We can't allow
* it because it always jumps to privilege level 0. A normal Guest
* trap made the switcher code come back, and an error code which some
* traps set. */
+ /* Restore SYSENTER if it's supposed to be on. */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
+
/* If the Guest page faulted, then the cr2 register will tell us the
* bad virtual address. We have to grab this now, because once we
* re-enable interrupts an interrupt could fault and thus overwrite
if (cpu->regs->trapnum == 14)
cpu->arch.last_pagefault = read_cr2();
/* Similarly, if we took a trap because the Guest used the FPU,
- * we have to restore the FPU it expects to see. */
+ * we have to restore the FPU it expects to see.
+ * math_state_restore() may sleep and we may even move off to
+ * a different CPU. So all the critical stuff should be done
+ * before this. */
else if (cpu->regs->trapnum == 7)
math_state_restore();
-
- /* Restore SYSENTER if it's supposed to be on. */
- if (boot_cpu_has(X86_FEATURE_SEP))
- wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
}
/*H:130 Now we've examined the hypercall code; our Guest can make requests.
int cd_irq;
int cd_retry;
#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY)
+#if defined(CONFIG_BLK_DEV_IDE_PMAC)
int cd_index;
#endif
};
}
}
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay(struct device_node *which_bay, int what)
{
int i;
}
EXPORT_SYMBOL(check_media_bay);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay_by_base(unsigned long base, int what)
{
int i;
printk("mediabay %d, registering IDE...\n", i);
pmu_suspend();
ide_port_scan(bay->cd_port);
- bay->cd_index = bay->cd_port->index;
+ if (bay->cd_port->present)
+ bay->cd_index = bay->cd_port->index;
pmu_resume();
}
if (bay->cd_index == -1) {
if (smu_cmdbuf_abs == 0) {
printk(KERN_ERR "SMU: Command buffer not allocated !\n");
+ of_node_put(np);
return -EINVAL;
}
smu = alloc_bootmem(sizeof(struct smu_device));
- if (smu == NULL)
+ if (smu == NULL) {
+ of_node_put(np);
return -ENOMEM;
+ }
memset(smu, 0, sizeof(*smu));
spin_lock_init(&smu->lock);
therm_type = ADT7460;
else if (of_device_is_compatible(np, "adt7467"))
therm_type = ADT7467;
- else
+ else {
+ of_node_put(np);
return -ENODEV;
+ }
prop = of_get_property(np, "hwsensor-params-version", NULL);
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
(*prop == 1)?"":"un");
- if (*prop != 1)
+ if (*prop != 1) {
+ of_node_put(np);
return -ENODEV;
+ }
prop = of_get_property(np, "reg", NULL);
- if (!prop)
+ if (!prop) {
+ of_node_put(np);
return -ENODEV;
+ }
/* look for bus either by path or using "reg" */
if (strstr(np->full_name, "/i2c-bus@") != NULL) {
if (of_dev == NULL) {
printk(KERN_ERR "Can't register temperatures device !\n");
+ of_node_put(np);
return -ENODEV;
}
[0x25] = KEY_POWER, /* power */
};
EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel);
+
+IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = {
+ [0x20] = KEY_LIST,
+ [0x00] = KEY_POWER,
+ [0x28] = KEY_1,
+ [0x18] = KEY_2,
+ [0x38] = KEY_3,
+ [0x24] = KEY_4,
+ [0x14] = KEY_5,
+ [0x34] = KEY_6,
+ [0x2c] = KEY_7,
+ [0x1c] = KEY_8,
+ [0x3c] = KEY_9,
+ [0x12] = KEY_SUBTITLE,
+ [0x22] = KEY_0,
+ [0x32] = KEY_REWIND,
+ [0x3a] = KEY_SHUFFLE,
+ [0x02] = KEY_PRINT,
+ [0x11] = KEY_CHANNELDOWN,
+ [0x31] = KEY_CHANNELUP,
+ [0x0c] = KEY_ZOOM,
+ [0x1e] = KEY_VOLUMEDOWN,
+ [0x3e] = KEY_VOLUMEUP,
+ [0x0a] = KEY_MUTE,
+ [0x04] = KEY_AUDIO,
+ [0x26] = KEY_RECORD,
+ [0x06] = KEY_PLAY,
+ [0x36] = KEY_STOP,
+ [0x16] = KEY_PAUSE,
+ [0x2e] = KEY_REWIND,
+ [0x0e] = KEY_FASTFORWARD,
+ [0x30] = KEY_TEXT,
+ [0x21] = KEY_GREEN,
+ [0x01] = KEY_BLUE,
+ [0x08] = KEY_EPG,
+ [0x2a] = KEY_MENU,
+};
+EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d);
u8 val;
int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
+ /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range
+ * for frequencies above 61.1 MHz. In these cases, the internal RF
+ * tracking filters calibration mechanism is used.
+ *
+ * There is no need to warn the user about this.
+ */
+ if (ret < 0)
+ goto fail;
regs[R_EB14] = val;
-
+fail:
return ret;
}
TDA18271_MAIN_PLL, force);
}
+static inline void tda18271_set_if_notch(struct dvb_frontend *fe)
+{
+ struct tda18271_priv *priv = fe->tuner_priv;
+ unsigned char *regs = priv->tda18271_regs;
+
+ switch (priv->mode) {
+ case TDA18271_ANALOG:
+ regs[R_MPD] &= ~0x80; /* IF notch = 0 */
+ break;
+ case TDA18271_DIGITAL:
+ regs[R_MPD] |= 0x80; /* IF notch = 1 */
+ break;
+ }
+}
+
static int tda18271_channel_configuration(struct dvb_frontend *fe,
struct tda18271_std_map_item *map,
u32 freq, u32 bw)
regs[R_EP3] &= ~0x1f; /* clear std bits */
regs[R_EP3] |= (map->agc_mode << 3) | map->std;
- /* set rfagc to high speed mode */
- regs[R_EP3] &= ~0x04;
+ if (priv->id == TDA18271HDC2) {
+ /* set rfagc to high speed mode */
+ regs[R_EP3] &= ~0x04;
+ }
/* set cal mode to normal */
regs[R_EP4] &= ~0x03;
- /* update IF output level & IF notch frequency */
+ /* update IF output level */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
regs[R_EP4] |= (map->if_lvl << 2);
- switch (priv->mode) {
- case TDA18271_ANALOG:
- regs[R_MPD] &= ~0x80; /* IF notch = 0 */
- break;
- case TDA18271_DIGITAL:
- regs[R_MPD] |= 0x80; /* IF notch = 1 */
- break;
- }
-
/* update FM_RFn */
regs[R_EP4] &= ~0x80;
regs[R_EP4] |= map->fm_rfn << 7;
/* disable Power Level Indicator */
regs[R_EP1] |= 0x40;
+ /* make sure thermometer is off */
+ regs[R_TM] &= ~0x10;
+
/* frequency dependent parameters */
tda18271_calc_ir_measure(fe, &freq);
switch (priv->role) {
case TDA18271_MASTER:
tda18271_calc_main_pll(fe, N);
+ tda18271_set_if_notch(fe);
tda18271_write_regs(fe, R_MPD, 4);
break;
case TDA18271_SLAVE:
tda18271_write_regs(fe, R_CPD, 4);
regs[R_MPD] = regs[R_CPD] & 0x7f;
+ tda18271_set_if_notch(fe);
tda18271_write_regs(fe, R_MPD, 1);
break;
}
msleep(20);
- /* set rfagc to normal speed mode */
- if (map->fm_rfn)
- regs[R_EP3] &= ~0x04;
- else
- regs[R_EP3] |= 0x04;
- ret = tda18271_write_regs(fe, R_EP3, 1);
+ if (priv->id == TDA18271HDC2) {
+ /* set rfagc to normal speed mode */
+ if (map->fm_rfn)
+ regs[R_EP3] &= ~0x04;
+ else
+ regs[R_EP3] |= 0x04;
+ ret = tda18271_write_regs(fe, R_EP3, 1);
+ }
fail:
return ret;
}
/* set cal mode to normal */
regs[R_EP4] &= ~0x03;
- /* update IF output level & IF notch frequency */
+ /* update IF output level */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
ret = tda18271_write_regs(fe, R_EP3, 2);
{"FM Radio-INPUT1", 0x0208, 0x9002}
};
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
static void xc5000_TunerReset(struct dvb_frontend *fe);
static int xc_shutdown(struct xc5000_priv *priv)
{
- return 0;
+ return XC_RESULT_SUCCESS;
/* Fixme: cannot bring tuner back alive once shutdown
* without reloading the driver modules.
* return xc_write_reg(priv, XREG_POWER_DOWN, 0);
return 0;
}
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
+{
+ struct xc5000_priv *priv = fe->tuner_priv;
+ int ret;
+ u16 id;
+
+ ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
+ if (ret == XC_RESULT_SUCCESS) {
+ if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
+ ret = XC_RESULT_RESET_FAILURE;
+ else
+ ret = XC_RESULT_SUCCESS;
+ }
+
+ dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
+ ret == XC_RESULT_SUCCESS ? "True" : "False", id);
+ return ret;
+}
+
static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
static int xc5000_set_analog_params(struct dvb_frontend *fe,
struct xc5000_priv *priv = fe->tuner_priv;
int ret;
- if(priv->fwloaded == 0)
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
xc_load_fw_and_init_tuner(fe);
dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
struct xc5000_priv *priv = fe->tuner_priv;
int ret = 0;
- if (priv->fwloaded == 0) {
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
ret = xc5000_fwupload(fe);
if (ret != XC_RESULT_SUCCESS)
return ret;
- priv->fwloaded = 1;
}
/* Start the tuner self-calibration process */
return -EREMOTEIO;
}
else {
- /* priv->fwloaded = 0; */
return XC_RESULT_SUCCESS;
}
}
cfg->i2c_address);
printk(KERN_INFO
"xc5000: Firmware has been loaded previously\n");
- priv->fwloaded = 1;
break;
case XC_PRODUCT_ID_FW_NOT_LOADED:
printk(KERN_INFO
cfg->i2c_address);
printk(KERN_INFO
"xc5000: Firmware has not been loaded previously\n");
- priv->fwloaded = 0;
break;
default:
printk(KERN_ERR
u32 bandwidth;
u8 video_standard;
u8 rf_mode;
- u8 fwloaded;
void *devptr;
};
return -EINVAL;
}
+ msleep(1); /* avoid I2C errors */
+
return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
value, index, rbuf, rlen, 2000);
}
};
/* Callbacks for DVB USB */
-static int gl861_identify_state(struct usb_device *udev,
- struct dvb_usb_device_properties *props,
- struct dvb_usb_device_description **desc,
- int *cold)
-{
- *cold = 0;
-
- return 0;
-}
-
static struct zl10353_config gl861_zl10353_config = {
.demod_address = 0x0f,
.no_tuner = 1,
.size_of_priv = 0,
- .identify_state = gl861_identify_state,
.num_adapters = 1,
.adapter = {{
.num_device_descs = 2,
.devices = {
- { "MSI Mega Sky 55801 DVB-T USB2.0",
- { &gl861_table[0], NULL },
- { NULL },
+ {
+ .name = "MSI Mega Sky 55801 DVB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &gl861_table[0], NULL },
},
- { "A-LINK DTU DVB-T USB2.0",
- { &gl861_table[1], NULL },
- { NULL },
+ {
+ .name = "A-LINK DTU DVB-T USB2.0",
+ .cold_ids = { NULL },
+ .warm_ids = { &gl861_table[1], NULL },
},
}
};
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 20,
+ .count = MAX_NO_URBS_FOR_DATA_STREAM,
.endpoint = 0x06,
.u = {
.bulk = {
struct dvb_frontend_parameters *p)
{
struct au8522_state *state = fe->demodulator_priv;
+ int ret = -EINVAL;
dprintk("%s(frequency=%d)\n", __func__, p->frequency);
- state->current_frequency = p->frequency;
+ if ((state->current_frequency == p->frequency) &&
+ (state->current_modulation == p->u.vsb.modulation))
+ return 0;
au8522_enable_modulation(fe, p->u.vsb.modulation);
if (fe->ops.tuner_ops.set_params) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- fe->ops.tuner_ops.set_params(fe, p);
+ ret = fe->ops.tuner_ops.set_params(fe, p);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
+ if (ret < 0)
+ return ret;
+
+ state->current_frequency = p->frequency;
+
return 0;
}
return 0;
}
+static int au8522_sleep(struct dvb_frontend *fe)
+{
+ struct au8522_state *state = fe->demodulator_priv;
+ dprintk("%s()\n", __func__);
+
+ state->current_frequency = 0;
+
+ return 0;
+}
+
static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct au8522_state *state = fe->demodulator_priv;
if (state->current_modulation == VSB_8) {
dprintk("%s() Checking VSB_8\n", __func__);
reg = au8522_readreg(state, 0x4088);
- if (reg & 0x01)
- *status |= FE_HAS_VITERBI;
- if (reg & 0x02)
- *status |= FE_HAS_LOCK | FE_HAS_SYNC;
+ if ((reg & 0x03) == 0x03)
+ *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI;
} else {
dprintk("%s() Checking QAM\n", __func__);
reg = au8522_readreg(state, 0x4541);
},
.init = au8522_init,
+ .sleep = au8522_sleep,
.i2c_gate_ctrl = au8522_i2c_gate_ctrl,
.set_frontend = au8522_set_frontend,
.get_frontend = au8522_get_frontend,
u32 symbol_rate;
fe_code_rate_t fec_inner;
int errmode;
+ u32 ucblocks;
};
#define STATUS_BER 0
{
struct stv0299_state* state = fe->demodulator_priv;
- if (state->errmode != STATUS_BER) return 0;
- *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
+ if (state->errmode != STATUS_BER)
+ return -ENOSYS;
+
+ *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8);
return 0;
}
{
struct stv0299_state* state = fe->demodulator_priv;
- if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
- else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
+ if (state->errmode != STATUS_UCBLOCKS)
+ return -ENOSYS;
+
+ state->ucblocks += stv0299_readreg(state, 0x1e);
+ state->ucblocks += (stv0299_readreg(state, 0x1d) << 8);
+ *ucblocks = state->ucblocks;
return 0;
}
int ret;
ret = i2c_transfer (state->i2c, msg, 2);
- if (ret != 2)
- printk("DVB: TDA10023: %s: readreg error (ret == %i)\n",
- __func__, ret);
+ if (ret != 2) {
+ int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
+ printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error "
+ "(reg == 0x%02x, ret == %i)\n",
+ num, __func__, reg, ret);
+ }
return b1[0];
}
int ret;
ret = i2c_transfer (state->i2c, &msg, 1);
- if (ret != 1)
- printk("DVB: TDA10023(%d): %s, writereg error "
+ if (ret != 1) {
+ int num = state->frontend.dvb ? state->frontend.dvb->num : -1;
+ printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error "
"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
- state->frontend.dvb->num, __func__, reg, data, ret);
-
+ num, __func__, reg, data, ret);
+ }
return (ret != 1) ? -EREMOTEIO : 0;
}
int i;
/* allocate memory for the internal state */
- state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL);
+ state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL);
if (state == NULL) goto error;
/* setup the state */
struct i2c_adapter* i2c)
{
struct tda1004x_state *state;
+ int id;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (!state)
+ if (!state) {
+ printk(KERN_ERR "Can't alocate memory for tda10045 state\n");
return NULL;
+ }
/* setup the state */
state->config = config;
state->demod_type = TDA1004X_DEMOD_TDA10045;
/* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) {
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+
+ if (id != 0x25) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
kfree(state);
return NULL;
}
struct i2c_adapter* i2c)
{
struct tda1004x_state *state;
+ int id;
/* allocate memory for the internal state */
state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
- if (!state)
+ if (!state) {
+ printk(KERN_ERR "Can't alocate memory for tda10046 state\n");
return NULL;
+ }
/* setup the state */
state->config = config;
state->demod_type = TDA1004X_DEMOD_TDA10046;
/* check if the demod is there */
- if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
+ id = tda1004x_read_byte(state, TDA1004X_CHIPID);
+ if (id < 0) {
+ printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
+ kfree(state);
+ return NULL;
+ }
+ if (id != 0x46) {
+ printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
kfree(state);
return NULL;
}
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
depends on DVB_BUDGET_CORE && I2C
+ depends on INPUT # due to IR
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
if (err) {
printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n",
__func__, type);
+ av7110->arm_errors++;
return -ETIMEDOUT;
}
msleep(1);
static inline int WaitUntilBmpLoaded(struct av7110 *av7110)
{
- int ret = wait_event_interruptible_timeout(av7110->bmpq,
+ int ret = wait_event_timeout(av7110->bmpq,
av7110->bmp_state != BMP_LOADING, 10*HZ);
- if (ret == -ERESTARTSYS)
- return ret;
if (ret == 0) {
printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n",
ret, av7110->bmp_state);
/* Make sure we support the board model */
switch (tv.model) {
+ case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
+ case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
+ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */
case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */
+ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
default:
printk(KERN_WARNING "%s: warning: "
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 },
{ USB_DEVICE(0x0fe9, 0xd620),
.driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 },
+ { USB_DEVICE(0x2040, 0x7210),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7217),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x721b),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x721f),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7280),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x0fd9, 0x0008),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
{ },
};
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_CS5345
- select DVB_S5H1409
- select MEDIA_TUNER_MXL5005S
+ select DVB_S5H1409 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
or_value);
}
+int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask)
+{
+ int retval;
+ u32 saved_reg[8] = {0};
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
+ saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL);
+ saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
+ saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1);
+ saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
+ saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL);
+ saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL);
+ saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG);
+ saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG);
+ }
+
+ retval = cx18_av_write(cx, addr, value);
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_AFE) {
+ cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]);
+ cx18_av_write4(cx, CXADEC_AFE_CTRL, saved_reg[1]);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_PLL) {
+ cx18_av_write4(cx, CXADEC_PLL_CTRL1, saved_reg[2]);
+ cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]);
+ }
+
+ if (no_acfg_mask & CXADEC_NO_ACFG_VID) {
+ cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL, saved_reg[4]);
+ cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL, saved_reg[5]);
+ cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, saved_reg[6]);
+ cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]);
+ }
+
+ return retval;
+}
+
+int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask,
+ u8 or_value, int no_acfg_mask)
+{
+ return cx18_av_write_no_acfg(cx, addr,
+ (cx18_av_read(cx, addr) & and_mask) |
+ or_value, no_acfg_mask);
+}
+
/* ----------------------------------------------------------------------- */
static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
/* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
if (std & V4L2_STD_SECAM)
- cx18_av_write(cx, 0x402, 0);
+ cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL);
else {
- cx18_av_write(cx, 0x402, 0x04);
+ cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL);
cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
}
- cx18_av_and_or(cx, 0x401, ~0x60, 0);
- cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
if (std & V4L2_STD_525_60) {
if (std == V4L2_STD_NTSC_M_JP) {
if ((vid_input & ~0xff0) ||
luma < CX18_AV_SVIDEO_LUMA1 ||
- luma > CX18_AV_SVIDEO_LUMA4 ||
+ luma > CX18_AV_SVIDEO_LUMA8 ||
chroma < CX18_AV_SVIDEO_CHROMA4 ||
chroma > CX18_AV_SVIDEO_CHROMA8) {
CX18_ERR("0x%04x is not a valid video input!\n",
cx18_av_write(cx, 0x103, reg);
/* Set INPUT_MODE to Composite (0) or S-Video (1) */
- cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02);
+ cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02,
+ CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID);
/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
This happens for example with the Yuan MPC622. */
if (fmt >= 4 && fmt < 8) {
/* Set format to NTSC-M */
- cx18_av_and_or(cx, 0x400, ~0xf, 1);
+ cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE);
/* Turn off LCOMB */
cx18_av_and_or(cx, 0x47b, ~6, 0);
}
- cx18_av_and_or(cx, 0x400, ~0xf, fmt);
- cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
+ cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE);
+ cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL);
cx18_av_vbi_setup(cx);
input_change(cx);
return 0;
CX18_AV_COMPOSITE7,
CX18_AV_COMPOSITE8,
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
chroma input (In5-In8) */
CX18_AV_SVIDEO_LUMA1 = 0x10,
CX18_AV_SVIDEO_LUMA2 = 0x20,
CX18_AV_SVIDEO_LUMA3 = 0x30,
CX18_AV_SVIDEO_LUMA4 = 0x40,
+ CX18_AV_SVIDEO_LUMA5 = 0x50,
+ CX18_AV_SVIDEO_LUMA6 = 0x60,
+ CX18_AV_SVIDEO_LUMA7 = 0x70,
+ CX18_AV_SVIDEO_LUMA8 = 0x80,
CX18_AV_SVIDEO_CHROMA4 = 0x400,
CX18_AV_SVIDEO_CHROMA5 = 0x500,
CX18_AV_SVIDEO_CHROMA6 = 0x600,
#define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */
#define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */
+/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/
+#define CXADEC_NO_ACFG_AFE 0x01 /* Preserve 0x100-0x107 */
+#define CXADEC_NO_ACFG_PLL 0x02 /* Preserve 0x108-0x10f */
+#define CXADEC_NO_ACFG_VID 0x04 /* Preserve 0x470-0x47f */
+#define CXADEC_NO_ACFG_ALL 0x07
+
/* ----------------------------------------------------------------------- */
/* cx18_av-core.c */
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value,
+ int no_acfg_mask);
u8 cx18_av_read(struct cx18 *cx, u16 addr);
u32 cx18_av_read4(struct cx18 *cx, u16 addr);
int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
+int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value,
+ int no_acfg_mask);
int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg);
/* ----------------------------------------------------------------------- */
#include "cx18-driver.h"
#include "cx18-cards.h"
+#include "cx18-av-core.h"
#include "cx18-i2c.h"
#include <media/cs5345.h>
.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
- { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 },
- { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
.ddr = {
/* ESMT M13S128324A-5B memory */
.chip_config = 0x003,
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ },
.i2c = &cx18_i2c_std,
};
.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
- { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 },
- { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
- CX23418_AUDIO_SERIAL, CS5345_IN_2 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, CS5345_IN_4 },
.ddr = {
/* Samsung K4D263238G-VC33 memory */
.chip_config = 0x003,
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ },
.i2c = &cx18_i2c_std,
};
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
{ CX18_CARD_INPUT_SVIDEO1, 1,
- CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 },
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, 0 },
+ CX18_AV_AUDIO8, 0 },
{ CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, 0 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ CX18_AV_AUDIO_SERIAL, 0 },
.tuners = {
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
static const struct cx18_card cx18_card_mpc718 = {
.type = CX18_CARD_YUAN_MPC718,
.name = "Yuan MPC718",
- .comment = "Not yet supported!\n",
- .v4l2_capabilities = 0,
+ .comment = "Some Composite and S-Video inputs are currently working.\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
+ { CX18_CARD_INPUT_SVIDEO1, 1,
+ CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+ { CX18_CARD_INPUT_SVIDEO2, 2,
+ CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+ { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
},
.audio_inputs = {
- { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO8, 0 },
- { CX18_CARD_INPUT_LINE_IN1,
- CX23418_AUDIO_SERIAL, 0 },
+ { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 },
+ { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 },
},
- .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
- CX23418_AUDIO_SERIAL, 0 },
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 },
.tuners = {
/* XC3028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
#define CX18_CARD_INPUT_COMPOSITE2 5
#define CX18_CARD_INPUT_COMPOSITE3 6
-enum cx34180_video_input {
- /* Composite video inputs In1-In8 */
- CX23418_COMPOSITE1 = 1,
- CX23418_COMPOSITE2,
- CX23418_COMPOSITE3,
- CX23418_COMPOSITE4,
- CX23418_COMPOSITE5,
- CX23418_COMPOSITE6,
- CX23418_COMPOSITE7,
- CX23418_COMPOSITE8,
-
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
- chroma input (In5-In8) */
- CX23418_SVIDEO_LUMA1 = 0x10,
- CX23418_SVIDEO_LUMA2 = 0x20,
- CX23418_SVIDEO_LUMA3 = 0x30,
- CX23418_SVIDEO_LUMA4 = 0x40,
- CX23418_SVIDEO_CHROMA4 = 0x400,
- CX23418_SVIDEO_CHROMA5 = 0x500,
- CX23418_SVIDEO_CHROMA6 = 0x600,
- CX23418_SVIDEO_CHROMA7 = 0x700,
- CX23418_SVIDEO_CHROMA8 = 0x800,
-
- /* S-Video aliases for common luma/chroma combinations */
- CX23418_SVIDEO1 = 0x510,
- CX23418_SVIDEO2 = 0x620,
- CX23418_SVIDEO3 = 0x730,
- CX23418_SVIDEO4 = 0x840,
-};
-
/* audio inputs */
#define CX18_CARD_INPUT_AUD_TUNER 1
#define CX18_CARD_INPUT_LINE_IN1 2
#define CX18_CARD_MAX_AUDIO_INPUTS 3
#define CX18_CARD_MAX_TUNERS 2
-enum cx23418_audio_input {
- /* Audio inputs: serial or In4-In8 */
- CX23418_AUDIO_SERIAL,
- CX23418_AUDIO4 = 4,
- CX23418_AUDIO5,
- CX23418_AUDIO6,
- CX23418_AUDIO7,
- CX23418_AUDIO8,
-};
-
/* V4L2 capability aliases */
#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
V4L2_CAP_AUDIO | V4L2_CAP_READWRITE)
u32 initial_value;
};
+struct cx18_gpio_i2c_slave_reset {
+ u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
+ u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
+ int msecs_asserted; /* time period reset must remain asserted */
+ int msecs_recovery; /* time after deassert for chips to be ready */
+};
+
struct cx18_card_tuner {
v4l2_std_id std; /* standard for which the tuner is suitable */
int tuner; /* tuner ID (from tuner.h) */
/* GPIO card-specific settings */
u8 xceive_pin; /* XCeive tuner GPIO reset pin */
- struct cx18_gpio_init gpio_init;
+ struct cx18_gpio_init gpio_init;
+ struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
struct cx18_card_tuner_i2c *i2c;
struct dvb_demux *demux = feed->demux;
struct cx18_stream *stream = (struct cx18_stream *) demux->priv;
struct cx18 *cx = stream->cx;
- int ret = -EINVAL;
+ int ret;
u32 v;
CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n",
feed->pid, feed->index);
+
+ mutex_lock(&cx->serialize_lock);
+ ret = cx18_init_on_first_open(cx);
+ mutex_unlock(&cx->serialize_lock);
+ if (ret) {
+ CX18_ERR("Failed to initialize firmware starting DVB feed\n");
+ return ret;
+ }
+ ret = -EINVAL;
+
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
if (stream->dvb.feeding++ == 0) {
CX18_DEBUG_INFO("Starting Transport DMA\n");
ret = cx18_start_v4l2_encode_stream(stream);
+ if (ret < 0) {
+ CX18_DEBUG_INFO(
+ "Failed to start Transport DMA\n");
+ stream->dvb.feeding--;
+ }
} else
ret = 0;
mutex_unlock(&stream->dvb.feedlock);
write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
CX18_REG_GPIO_OUT1);
write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
- write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
+ write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
CX18_REG_GPIO_OUT2);
}
+void cx18_reset_i2c_slaves_gpio(struct cx18 *cx)
+{
+ const struct cx18_gpio_i2c_slave_reset *p;
+
+ p = &cx->card->gpio_i2c_slave_reset;
+
+ if ((p->active_lo_mask | p->active_hi_mask) == 0)
+ return;
+
+ /* Assuming that the masks are a subset of the bits in gpio_dir */
+
+ /* Assert */
+ cx->gpio_val =
+ (cx->gpio_val | p->active_hi_mask) & ~(p->active_lo_mask);
+ gpio_write(cx);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted));
+
+ /* Deassert */
+ cx->gpio_val =
+ (cx->gpio_val | p->active_lo_mask) & ~(p->active_hi_mask);
+ gpio_write(cx);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery));
+}
+
void cx18_gpio_init(struct cx18 *cx)
{
cx->gpio_dir = cx->card->gpio_init.direction;
*/
void cx18_gpio_init(struct cx18 *cx);
+void cx18_reset_i2c_slaves_gpio(struct cx18 *cx);
int cx18_reset_tuner_gpio(void *dev, int cmd, int value);
cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
+ cx18_reset_i2c_slaves_gpio(cx);
+
return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
i2c_bit_add_bus(&cx->i2c_adap[1]);
}
int chroma = vid_input & 0xf00;
if ((vid_input & ~0xff0) ||
- luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 ||
+ luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 ||
chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) {
v4l_err(client, "0x%04x is not a valid video input!\n",
vid_input);
struct snd_pcm_runtime *runtime = substream->runtime;
int err;
+ if (!chip) {
+ printk(KERN_ERR "BUG: cx88 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS);
if (err < 0)
goto _error;
dprintk("opening device and trying to acquire exclusive lock\n");
+ if (!dev) {
+ printk(KERN_ERR "BUG: em28xx can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+
/* Sets volume, mute, etc */
dev->mute = 0;
static int devnr;
int ret, err;
+ if (dev->has_audio_class) {
+ /* This device does not support the extension (in this case
+ the device is expecting the snd-usb-audio module */
+ return 0;
+ }
+
printk(KERN_INFO "em28xx-audio.c: probing for em28x1 "
"non standard usbaudio\n");
printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus "
if (dev == NULL)
return 0;
+ if (dev->has_audio_class) {
+ /* This device does not support the extension (in this case
+ the device is expecting the snd-usb-audio module */
+ return 0;
+ }
+
if (dev->adev) {
snd_card_free(dev->adev->sndcard);
kfree(dev->adev);
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.mts_firmware = 1,
+ .has_dvb = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (rc > 0) {
switch (rc) {
+ case CHIP_ID_EM2860:
+ em28xx_info("chip ID is em2860\n");
+ break;
case CHIP_ID_EM2883:
em28xx_info("chip ID is em2882/em2883\n");
dev->wait_after_write = 0;
int result = 0;
struct em28xx_dvb *dvb;
+ if (!dev->has_dvb) {
+ /* This device does not support the extension */
+ return 0;
+ }
+
dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
static int dvb_fini(struct em28xx *dev)
{
+ if (!dev->has_dvb) {
+ /* This device does not support the extension */
+ return 0;
+ }
+
if (dev->dvb) {
unregister_dvb(dev->dvb);
dev->dvb = NULL;
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
+ CHIP_ID_EM2860 = 34,
CHIP_ID_EM2883 = 36,
};
int em28xx_register_extension(struct em28xx_ops *ops)
{
- struct em28xx *h, *dev = NULL;
-
- list_for_each_entry(h, &em28xx_devlist, devlist)
- dev = h;
+ struct em28xx *dev = NULL;
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
- if (dev)
- ops->init(dev);
-
+ list_for_each_entry(dev, &em28xx_devlist, devlist) {
+ if (dev)
+ ops->init(dev);
+ }
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
-
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
void em28xx_unregister_extension(struct em28xx_ops *ops)
{
- struct em28xx *h, *dev = NULL;
-
- list_for_each_entry(h, &em28xx_devlist, devlist)
- dev = h;
+ struct em28xx *dev = NULL;
- if (dev)
- ops->fini(dev);
+ list_for_each_entry(dev, &em28xx_devlist, devlist) {
+ if (dev)
+ ops->fini(dev);
+ }
mutex_lock(&em28xx_extension_devlist_lock);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
struct pxa_camera_dev *pcdev;
struct resource *res;
void __iomem *base;
- unsigned int irq;
+ int irq;
int err = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!res || !irq) {
+ if (!res || irq < 0) {
err = -ENODEV;
goto exit;
}
struct snd_pcm_runtime *runtime = substream->runtime;
snd_card_saa7134_pcm_t *pcm;
snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
- struct saa7134_dev *dev = saa7134->dev;
+ struct saa7134_dev *dev;
int amux, err;
+ if (!saa7134) {
+ printk(KERN_ERR "BUG: saa7134 can't find device struct."
+ " Can't proceed with open\n");
+ return -ENODEV;
+ }
+ dev = saa7134->dev;
mutex_lock(&dev->dmasound.lock);
dev->dmasound.read_count = 0;
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- /*
- TODO:
.mpeg = SAA7134_MPEG_DVB,
- */
-
.inputs = {{
.name = name_tv,
.vmux = 1,
} },
.radio = {
.name = name_radio,
- .amux = LINE1,
+ .amux = TV,
},
},
[SAA7134_BOARD_AVERMEDIA_M115] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
{
switch (command) {
case XC2028_TUNER_RESET:
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
- mdelay(250);
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0);
- mdelay(250);
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
- mdelay(250);
- saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02);
- saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81);
- saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7);
- saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03);
- saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2,
- 0x0001e000, 0x0001e000);
- return 0;
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
+ saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+ switch (dev->board) {
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ saa7134_set_gpio(dev, 21, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 21, 1);
+ break;
+ }
+ return 0;
}
return -EINVAL;
}
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
- case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
case SAA7134_BOARD_AVERMEDIA_M115:
- case SAA7134_BOARD_AVERMEDIA_A16D:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
msleep(10);
break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ saa7134_set_gpio(dev, 23, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 23, 1);
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ saa7134_set_gpio(dev, 21, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 21, 1);
+ msleep(1);
+ dev->has_remote = SAA7134_REMOTE_GPIO;
+ break;
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
/* power-down tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004);
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
printk("%s: %s: hybrid analog/dvb card\n"
- "%s: Sorry, only the analog inputs are supported for now.\n",
+ "%s: Sorry, only analog s-video and composite input "
+ "are supported for now.\n",
dev->name, card(dev).name, dev->name);
break;
}
switch (dev->board) {
case SAA7134_BOARD_AVERMEDIA_A16D:
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
ctl.demod = XC3028_FE_ZARLINK456;
break;
default:
return 0;
}
-static int mt352_aver_a16d_init(struct dvb_frontend *fe)
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
{
- static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
- static u8 reset [] = { RESET, 0x80 };
- static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
- static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0xe };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
mt352_write(fe, clock_config, sizeof(clock_config));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
return 0;
}
-
-
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
.demod_init = mt352_aver777_init,
};
-static struct mt352_config avermedia_16d = {
- .demod_address = 0xf,
- .demod_init = mt352_aver_a16d_init,
-};
-
-static struct mt352_config avermedia_e506r_mt352_dev = {
+static struct mt352_config avermedia_xc3028_mt352_dev = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
+ .demod_init = mt352_avermedia_xc3028_init,
};
/* ==================================================================
}
break;
case SAA7134_BOARD_AVERMEDIA_A16D:
- dprintk("avertv A16D dvb setup\n");
- dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d,
- &dev->i2c_adap);
+ dprintk("AverMedia A16D dvb setup\n");
+ dev->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
break;
case SAA7134_BOARD_MD7134:
ads_tech_duo_config.tuner_address);
goto dettach_frontend;
}
- }
+ } else
+ wprintk("failed to attach tda10046\n");
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ dprintk("AverMedia E506R dvb setup\n");
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
dev->dvb.frontend = dvb_attach(mt352_attach,
- &avermedia_e506r_mt352_dev,
- &dev->i2c_adap);
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
attach_xc3028 = 1;
- break;
case SAA7134_BOARD_MD7134_BRIDGE_2:
dev->dvb.frontend = dvb_attach(tda10086_attach,
&sd1878_4m, &dev->i2c_adap);
return ret;
dettach_frontend:
- dvb_frontend_detach(dev->dvb.frontend);
+ if (dev->dvb.frontend)
+ dvb_frontend_detach(dev->dvb.frontend);
dev->dvb.frontend = NULL;
return -1;
{
struct saa7134_dev *dev = file->private_data;
+ mutex_lock(&dev->empress_tsq.vb_lock);
+
videobuf_stop(&dev->empress_tsq);
videobuf_mmap_free(&dev->empress_tsq);
- dev->empress_users--;
/* stop the encoder */
ts_reset_encoder(dev);
saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6));
+ dev->empress_users--;
+
+ mutex_unlock(&dev->empress_tsq.vb_lock);
+
return 0;
}
static int empress_g_fmt_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f);
static int empress_s_fmt_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f);
static int empress_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *p)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_reqbufs(&dev->empress_tsq, p);
}
static int empress_querybuf(struct file *file, void *priv,
struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_querybuf(&dev->empress_tsq, b);
}
static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_qbuf(&dev->empress_tsq, b);
}
static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_dqbuf(&dev->empress_tsq, b,
file->f_flags & O_NONBLOCK);
static int empress_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_streamon(&dev->empress_tsq);
}
static int empress_streamoff(struct file *file, void *priv,
enum v4l2_buf_type type)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
return videobuf_streamoff(&dev->empress_tsq);
}
static int empress_s_ext_ctrls(struct file *file, void *priv,
struct v4l2_ext_controls *ctrls)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
/* count == 0 is abused in saa6752hs.c, so that special
case is handled here explicitly. */
static int empress_g_ext_ctrls(struct file *file, void *priv,
struct v4l2_ext_controls *ctrls)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
break;
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ ir_codes = ir_codes_avermedia_a16d;
+ mask_keycode = 0x02F200;
+ mask_keydown = 0x000400;
+ polling = 50; /* ms */
+ /* Without this we won't receive key up events */
+ saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
+ saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
+ break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = ir_codes_pixelview;
mask_keycode = 0x00001f;
.owner = THIS_MODULE,
};
-/*
- * Image capture host - this is a host device, not a bus device, so,
- * no bus reference, no probing.
- */
-static struct class soc_camera_host_class = {
- .owner = THIS_MODULE,
- .name = "camera_host",
-};
-
static void dummy_release(struct device *dev)
{
}
/* Number might be equal to the platform device ID */
sprintf(ici->dev.bus_id, "camera_host%d", ici->nr);
- ici->dev.class = &soc_camera_host_class;
mutex_lock(&list_lock);
list_for_each_entry(ix, &hosts, list) {
ret = driver_register(&ic_drv);
if (ret)
goto edrvr;
- ret = class_register(&soc_camera_host_class);
- if (ret)
- goto eclr;
return 0;
-eclr:
- driver_unregister(&ic_drv);
edrvr:
bus_unregister(&soc_camera_bus_type);
return ret;
static void __exit soc_camera_exit(void)
{
- class_unregister(&soc_camera_host_class);
driver_unregister(&ic_drv);
bus_unregister(&soc_camera_bus_type);
}
#define VIDEO_NUM_DEVICES 256
#define VIDEO_NAME "video4linux"
+struct std_descr {
+ v4l2_std_id std;
+ const char *descr;
+};
+
+static const struct std_descr standards[] = {
+ { V4L2_STD_NTSC, "NTSC" },
+ { V4L2_STD_NTSC_M, "NTSC-M" },
+ { V4L2_STD_NTSC_M_JP, "NTSC-M-JP" },
+ { V4L2_STD_NTSC_M_KR, "NTSC-M-KR" },
+ { V4L2_STD_NTSC_443, "NTSC-443" },
+ { V4L2_STD_PAL, "PAL" },
+ { V4L2_STD_PAL_BG, "PAL-BG" },
+ { V4L2_STD_PAL_B, "PAL-B" },
+ { V4L2_STD_PAL_B1, "PAL-B1" },
+ { V4L2_STD_PAL_G, "PAL-G" },
+ { V4L2_STD_PAL_H, "PAL-H" },
+ { V4L2_STD_PAL_I, "PAL-I" },
+ { V4L2_STD_PAL_DK, "PAL-DK" },
+ { V4L2_STD_PAL_D, "PAL-D" },
+ { V4L2_STD_PAL_D1, "PAL-D1" },
+ { V4L2_STD_PAL_K, "PAL-K" },
+ { V4L2_STD_PAL_M, "PAL-M" },
+ { V4L2_STD_PAL_N, "PAL-N" },
+ { V4L2_STD_PAL_Nc, "PAL-Nc" },
+ { V4L2_STD_PAL_60, "PAL-60" },
+ { V4L2_STD_SECAM, "SECAM" },
+ { V4L2_STD_SECAM_B, "SECAM-B" },
+ { V4L2_STD_SECAM_G, "SECAM-G" },
+ { V4L2_STD_SECAM_H, "SECAM-H" },
+ { V4L2_STD_SECAM_DK, "SECAM-DK" },
+ { V4L2_STD_SECAM_D, "SECAM-D" },
+ { V4L2_STD_SECAM_K, "SECAM-K" },
+ { V4L2_STD_SECAM_K1, "SECAM-K1" },
+ { V4L2_STD_SECAM_L, "SECAM-L" },
+ { V4L2_STD_SECAM_LC, "SECAM-Lc" },
+ { 0, "Unknown" }
+};
+
/* video4linux standard ID conversion to standard name
*/
-char *v4l2_norm_to_name(v4l2_std_id id)
+const char *v4l2_norm_to_name(v4l2_std_id id)
{
- char *name;
u32 myid = id;
+ int i;
/* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
64 bit comparations. So, on that architecture, with some gcc
*/
BUG_ON(myid != id);
- switch (myid) {
- case V4L2_STD_PAL:
- name = "PAL";
- break;
- case V4L2_STD_PAL_BG:
- name = "PAL-BG";
- break;
- case V4L2_STD_PAL_DK:
- name = "PAL-DK";
- break;
- case V4L2_STD_PAL_B:
- name = "PAL-B";
- break;
- case V4L2_STD_PAL_B1:
- name = "PAL-B1";
- break;
- case V4L2_STD_PAL_G:
- name = "PAL-G";
- break;
- case V4L2_STD_PAL_H:
- name = "PAL-H";
- break;
- case V4L2_STD_PAL_I:
- name = "PAL-I";
- break;
- case V4L2_STD_PAL_D:
- name = "PAL-D";
- break;
- case V4L2_STD_PAL_D1:
- name = "PAL-D1";
- break;
- case V4L2_STD_PAL_K:
- name = "PAL-K";
- break;
- case V4L2_STD_PAL_M:
- name = "PAL-M";
- break;
- case V4L2_STD_PAL_N:
- name = "PAL-N";
- break;
- case V4L2_STD_PAL_Nc:
- name = "PAL-Nc";
- break;
- case V4L2_STD_PAL_60:
- name = "PAL-60";
- break;
- case V4L2_STD_NTSC:
- name = "NTSC";
- break;
- case V4L2_STD_NTSC_M:
- name = "NTSC-M";
- break;
- case V4L2_STD_NTSC_M_JP:
- name = "NTSC-M-JP";
- break;
- case V4L2_STD_NTSC_443:
- name = "NTSC-443";
- break;
- case V4L2_STD_NTSC_M_KR:
- name = "NTSC-M-KR";
- break;
- case V4L2_STD_SECAM:
- name = "SECAM";
- break;
- case V4L2_STD_SECAM_DK:
- name = "SECAM-DK";
- break;
- case V4L2_STD_SECAM_B:
- name = "SECAM-B";
- break;
- case V4L2_STD_SECAM_D:
- name = "SECAM-D";
- break;
- case V4L2_STD_SECAM_G:
- name = "SECAM-G";
- break;
- case V4L2_STD_SECAM_H:
- name = "SECAM-H";
- break;
- case V4L2_STD_SECAM_K:
- name = "SECAM-K";
- break;
- case V4L2_STD_SECAM_K1:
- name = "SECAM-K1";
- break;
- case V4L2_STD_SECAM_L:
- name = "SECAM-L";
- break;
- case V4L2_STD_SECAM_LC:
- name = "SECAM-LC";
- break;
- default:
- name = "Unknown";
- break;
- }
-
- return name;
+ for (i = 0; standards[i].std; i++)
+ if (myid == standards[i].std)
+ break;
+ return standards[i].descr;
}
EXPORT_SYMBOL(v4l2_norm_to_name);
/* Fill in the fields of a v4l2_standard structure according to the
'id' and 'transmission' parameters. Returns negative on error. */
int v4l2_video_std_construct(struct v4l2_standard *vs,
- int id, char *name)
+ int id, const char *name)
{
u32 index = vs->index;
case VIDIOC_ENUMSTD:
{
struct v4l2_standard *p = arg;
- v4l2_std_id id = vfd->tvnorms,curr_id=0;
- unsigned int index = p->index,i;
-
- if (index<0) {
- ret=-EINVAL;
- break;
- }
-
- /* Return norm array on a canonical way */
- for (i=0;i<= index && id; i++) {
- if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) {
- curr_id = V4L2_STD_PAL;
- } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) {
- curr_id = V4L2_STD_PAL_BG;
- } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) {
- curr_id = V4L2_STD_PAL_DK;
- } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) {
- curr_id = V4L2_STD_PAL_B;
- } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) {
- curr_id = V4L2_STD_PAL_B1;
- } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) {
- curr_id = V4L2_STD_PAL_G;
- } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) {
- curr_id = V4L2_STD_PAL_H;
- } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) {
- curr_id = V4L2_STD_PAL_I;
- } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) {
- curr_id = V4L2_STD_PAL_D;
- } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) {
- curr_id = V4L2_STD_PAL_D1;
- } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) {
- curr_id = V4L2_STD_PAL_K;
- } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) {
- curr_id = V4L2_STD_PAL_M;
- } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) {
- curr_id = V4L2_STD_PAL_N;
- } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) {
- curr_id = V4L2_STD_PAL_Nc;
- } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) {
- curr_id = V4L2_STD_PAL_60;
- } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
- curr_id = V4L2_STD_NTSC;
- } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) {
- curr_id = V4L2_STD_NTSC_M;
- } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) {
- curr_id = V4L2_STD_NTSC_M_JP;
- } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) {
- curr_id = V4L2_STD_NTSC_443;
- } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) {
- curr_id = V4L2_STD_NTSC_M_KR;
- } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
- curr_id = V4L2_STD_SECAM;
- } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) {
- curr_id = V4L2_STD_SECAM_DK;
- } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) {
- curr_id = V4L2_STD_SECAM_B;
- } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) {
- curr_id = V4L2_STD_SECAM_D;
- } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) {
- curr_id = V4L2_STD_SECAM_G;
- } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) {
- curr_id = V4L2_STD_SECAM_H;
- } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) {
- curr_id = V4L2_STD_SECAM_K;
- } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) {
- curr_id = V4L2_STD_SECAM_K1;
- } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) {
- curr_id = V4L2_STD_SECAM_L;
- } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) {
- curr_id = V4L2_STD_SECAM_LC;
- } else {
+ v4l2_std_id id = vfd->tvnorms, curr_id = 0;
+ unsigned int index = p->index, i, j = 0;
+ const char *descr = "";
+
+ /* Return norm array in a canonical way */
+ for (i = 0; i <= index && id; i++) {
+ /* last std value in the standards array is 0, so this
+ while always ends there since (id & 0) == 0. */
+ while ((id & standards[j].std) != standards[j].std)
+ j++;
+ curr_id = standards[j].std;
+ descr = standards[j].descr;
+ j++;
+ if (curr_id == 0)
break;
- }
- id &= ~curr_id;
+ if (curr_id != V4L2_STD_PAL &&
+ curr_id != V4L2_STD_SECAM &&
+ curr_id != V4L2_STD_NTSC)
+ id &= ~curr_id;
}
- if (i<=index)
+ if (i <= index)
return -EINVAL;
- v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id));
+ v4l2_video_std_construct(p, curr_id, descr);
p->index = index;
- dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
+ dbgarg(cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
"framelines=%d\n", p->index,
(unsigned long long)p->id, p->name,
p->frameperiod.numerator,
p->frameperiod.denominator,
p->framelines);
- ret=0;
+ ret = 0;
break;
}
case VIDIOC_G_STD:
int hmax = buf->vb.height;
int wmax = buf->vb.width;
struct timeval ts;
- char *tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC);
+ char *tmpbuf;
void *vbuf = videobuf_to_vmalloc(&buf->vb);
- if (!tmpbuf)
+ if (!vbuf)
return;
- if (!vbuf)
+ tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC);
+ if (!tmpbuf)
return;
for (h = 0; h < hmax; h++) {
mutex_lock(&tpacpi_inputdev_send_mutex);
input_report_switch(tpacpi_inputdev,
- SW_RADIO, !!wlsw);
+ SW_RFKILL_ALL, !!wlsw);
input_sync(tpacpi_inputdev);
mutex_unlock(&tpacpi_inputdev_send_mutex);
&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
};
+static void hotkey_exit(void)
+{
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ hotkey_poll_stop_sync();
+#endif
+
+ if (hotkey_dev_attributes)
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+
+ kfree(hotkey_keycode_map);
+
+ if (tp_features.hotkey) {
+ dbg_printk(TPACPI_DBG_EXIT,
+ "restoring original hot key mask\n");
+ /* no short-circuit boolean operator below! */
+ if ((hotkey_mask_set(hotkey_orig_mask) |
+ hotkey_status_set(hotkey_orig_status)) != 0)
+ printk(TPACPI_ERR
+ "failed to restore hot key mask "
+ "to BIOS defaults\n");
+ }
+}
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n",
str_supported(tp_features.hotkey));
- if (tp_features.hotkey) {
- hotkey_dev_attributes = create_attr_set(13, NULL);
- if (!hotkey_dev_attributes)
- return -ENOMEM;
- res = add_many_to_attr_set(hotkey_dev_attributes,
- hotkey_attributes,
- ARRAY_SIZE(hotkey_attributes));
- if (res)
- return res;
+ if (!tp_features.hotkey)
+ return 1;
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
- for HKEY interface version 0x100 */
- if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
- if ((hkeyv >> 8) != 1) {
- printk(TPACPI_ERR "unknown version of the "
- "HKEY interface: 0x%x\n", hkeyv);
- printk(TPACPI_ERR "please report this to %s\n",
- TPACPI_MAIL);
- } else {
- /*
- * MHKV 0x100 in A31, R40, R40e,
- * T4x, X31, and later
- */
- tp_features.hotkey_mask = 1;
- }
+ hotkey_dev_attributes = create_attr_set(13, NULL);
+ if (!hotkey_dev_attributes)
+ return -ENOMEM;
+ res = add_many_to_attr_set(hotkey_dev_attributes,
+ hotkey_attributes,
+ ARRAY_SIZE(hotkey_attributes));
+ if (res)
+ goto err_exit;
+
+ /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
+ for HKEY interface version 0x100 */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) != 1) {
+ printk(TPACPI_ERR "unknown version of the "
+ "HKEY interface: 0x%x\n", hkeyv);
+ printk(TPACPI_ERR "please report this to %s\n",
+ TPACPI_MAIL);
+ } else {
+ /*
+ * MHKV 0x100 in A31, R40, R40e,
+ * T4x, X31, and later
+ */
+ tp_features.hotkey_mask = 1;
}
+ }
- vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
- str_supported(tp_features.hotkey_mask));
+ vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
+ str_supported(tp_features.hotkey_mask));
- if (tp_features.hotkey_mask) {
- if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
- "MHKA", "qd")) {
- printk(TPACPI_ERR
- "missing MHKA handler, "
- "please report this to %s\n",
- TPACPI_MAIL);
- /* FN+F12, FN+F4, FN+F3 */
- hotkey_all_mask = 0x080cU;
- }
+ if (tp_features.hotkey_mask) {
+ if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+ "MHKA", "qd")) {
+ printk(TPACPI_ERR
+ "missing MHKA handler, "
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ /* FN+F12, FN+F4, FN+F3 */
+ hotkey_all_mask = 0x080cU;
}
+ }
- /* hotkey_source_mask *must* be zero for
- * the first hotkey_mask_get */
- res = hotkey_status_get(&hotkey_orig_status);
- if (!res && tp_features.hotkey_mask) {
- res = hotkey_mask_get();
- hotkey_orig_mask = hotkey_mask;
- if (!res) {
- res = add_many_to_attr_set(
- hotkey_dev_attributes,
- hotkey_mask_attributes,
- ARRAY_SIZE(hotkey_mask_attributes));
- }
- }
+ /* hotkey_source_mask *must* be zero for
+ * the first hotkey_mask_get */
+ res = hotkey_status_get(&hotkey_orig_status);
+ if (res)
+ goto err_exit;
+
+ if (tp_features.hotkey_mask) {
+ res = hotkey_mask_get();
+ if (res)
+ goto err_exit;
+
+ hotkey_orig_mask = hotkey_mask;
+ res = add_many_to_attr_set(
+ hotkey_dev_attributes,
+ hotkey_mask_attributes,
+ ARRAY_SIZE(hotkey_mask_attributes));
+ if (res)
+ goto err_exit;
+ }
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- if (tp_features.hotkey_mask) {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_all_mask;
- } else {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
- }
+ if (tp_features.hotkey_mask) {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_all_mask;
+ } else {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
+ }
- vdbg_printk(TPACPI_DBG_INIT,
- "hotkey source mask 0x%08x, polling freq %d\n",
- hotkey_source_mask, hotkey_poll_freq);
+ vdbg_printk(TPACPI_DBG_INIT,
+ "hotkey source mask 0x%08x, polling freq %d\n",
+ hotkey_source_mask, hotkey_poll_freq);
#endif
- /* Not all thinkpads have a hardware radio switch */
- if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
- tp_features.hotkey_wlsw = 1;
- printk(TPACPI_INFO
- "radio switch found; radios are %s\n",
- enabled(status, 0));
- res = add_to_attr_set(hotkey_dev_attributes,
- &dev_attr_hotkey_radio_sw.attr);
- }
+ /* Not all thinkpads have a hardware radio switch */
+ if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
+ tp_features.hotkey_wlsw = 1;
+ printk(TPACPI_INFO
+ "radio switch found; radios are %s\n",
+ enabled(status, 0));
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_radio_sw.attr);
+ }
- /* For X41t, X60t, X61t Tablets... */
- if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
- tp_features.hotkey_tablet = 1;
- printk(TPACPI_INFO
- "possible tablet mode switch found; "
- "ThinkPad in %s mode\n",
- (status & TP_HOTKEY_TABLET_MASK)?
- "tablet" : "laptop");
- res = add_to_attr_set(hotkey_dev_attributes,
- &dev_attr_hotkey_tablet_mode.attr);
- }
+ /* For X41t, X60t, X61t Tablets... */
+ if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
+ tp_features.hotkey_tablet = 1;
+ printk(TPACPI_INFO
+ "possible tablet mode switch found; "
+ "ThinkPad in %s mode\n",
+ (status & TP_HOTKEY_TABLET_MASK)?
+ "tablet" : "laptop");
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_tablet_mode.attr);
+ }
- if (!res)
- res = register_attr_set_with_sysfs(
- hotkey_dev_attributes,
- &tpacpi_pdev->dev.kobj);
- if (res)
- return res;
+ if (!res)
+ res = register_attr_set_with_sysfs(
+ hotkey_dev_attributes,
+ &tpacpi_pdev->dev.kobj);
+ if (res)
+ goto err_exit;
- /* Set up key map */
+ /* Set up key map */
- hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
- GFP_KERNEL);
- if (!hotkey_keycode_map) {
- printk(TPACPI_ERR
- "failed to allocate memory for key map\n");
- return -ENOMEM;
- }
+ hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
+ GFP_KERNEL);
+ if (!hotkey_keycode_map) {
+ printk(TPACPI_ERR
+ "failed to allocate memory for key map\n");
+ res = -ENOMEM;
+ goto err_exit;
+ }
- if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
- dbg_printk(TPACPI_DBG_INIT,
- "using Lenovo default hot key map\n");
- memcpy(hotkey_keycode_map, &lenovo_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
+ if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using Lenovo default hot key map\n");
+ memcpy(hotkey_keycode_map, &lenovo_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ } else {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using IBM default hot key map\n");
+ memcpy(hotkey_keycode_map, &ibm_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ }
+
+ set_bit(EV_KEY, tpacpi_inputdev->evbit);
+ set_bit(EV_MSC, tpacpi_inputdev->evbit);
+ set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
+ tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
+ tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
+ tpacpi_inputdev->keycode = hotkey_keycode_map;
+ for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
+ if (hotkey_keycode_map[i] != KEY_RESERVED) {
+ set_bit(hotkey_keycode_map[i],
+ tpacpi_inputdev->keybit);
} else {
- dbg_printk(TPACPI_DBG_INIT,
- "using IBM default hot key map\n");
- memcpy(hotkey_keycode_map, &ibm_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
- }
-
- set_bit(EV_KEY, tpacpi_inputdev->evbit);
- set_bit(EV_MSC, tpacpi_inputdev->evbit);
- set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
- tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
- tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
- tpacpi_inputdev->keycode = hotkey_keycode_map;
- for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
- if (hotkey_keycode_map[i] != KEY_RESERVED) {
- set_bit(hotkey_keycode_map[i],
- tpacpi_inputdev->keybit);
- } else {
- if (i < sizeof(hotkey_reserved_mask)*8)
- hotkey_reserved_mask |= 1 << i;
- }
- }
-
- if (tp_features.hotkey_wlsw) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_RADIO, tpacpi_inputdev->swbit);
- }
- if (tp_features.hotkey_tablet) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
+ if (i < sizeof(hotkey_reserved_mask)*8)
+ hotkey_reserved_mask |= 1 << i;
}
+ }
- /* Do not issue duplicate brightness change events to
- * userspace */
- if (!tp_features.bright_acpimode)
- /* update bright_acpimode... */
- tpacpi_check_std_acpi_brightness_support();
-
- if (tp_features.bright_acpimode) {
- printk(TPACPI_INFO
- "This ThinkPad has standard ACPI backlight "
- "brightness control, supported by the ACPI "
- "video driver\n");
- printk(TPACPI_NOTICE
- "Disabling thinkpad-acpi brightness events "
- "by default...\n");
-
- /* The hotkey_reserved_mask change below is not
- * necessary while the keys are at KEY_RESERVED in the
- * default map, but better safe than sorry, leave it
- * here as a marker of what we have to do, especially
- * when we finally become able to set this at runtime
- * on response to X.org requests */
- hotkey_reserved_mask |=
- (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
- | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
- }
+ if (tp_features.hotkey_wlsw) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit);
+ }
+ if (tp_features.hotkey_tablet) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
+ }
- dbg_printk(TPACPI_DBG_INIT,
- "enabling hot key handling\n");
- res = hotkey_status_set(1);
- if (res)
- return res;
- res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
- & ~hotkey_reserved_mask)
- | hotkey_orig_mask);
- if (res < 0 && res != -ENXIO)
- return res;
+ /* Do not issue duplicate brightness change events to
+ * userspace */
+ if (!tp_features.bright_acpimode)
+ /* update bright_acpimode... */
+ tpacpi_check_std_acpi_brightness_support();
- dbg_printk(TPACPI_DBG_INIT,
- "legacy hot key reporting over procfs %s\n",
- (hotkey_report_mode < 2) ?
- "enabled" : "disabled");
+ if (tp_features.bright_acpimode) {
+ printk(TPACPI_INFO
+ "This ThinkPad has standard ACPI backlight "
+ "brightness control, supported by the ACPI "
+ "video driver\n");
+ printk(TPACPI_NOTICE
+ "Disabling thinkpad-acpi brightness events "
+ "by default...\n");
+
+ /* The hotkey_reserved_mask change below is not
+ * necessary while the keys are at KEY_RESERVED in the
+ * default map, but better safe than sorry, leave it
+ * here as a marker of what we have to do, especially
+ * when we finally become able to set this at runtime
+ * on response to X.org requests */
+ hotkey_reserved_mask |=
+ (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
+ | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
+ }
+
+ dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n");
+ res = hotkey_status_set(1);
+ if (res) {
+ hotkey_exit();
+ return res;
+ }
+ res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
+ & ~hotkey_reserved_mask)
+ | hotkey_orig_mask);
+ if (res < 0 && res != -ENXIO) {
+ hotkey_exit();
+ return res;
+ }
- tpacpi_inputdev->open = &hotkey_inputdev_open;
- tpacpi_inputdev->close = &hotkey_inputdev_close;
+ dbg_printk(TPACPI_DBG_INIT,
+ "legacy hot key reporting over procfs %s\n",
+ (hotkey_report_mode < 2) ?
+ "enabled" : "disabled");
- hotkey_poll_setup_safe(1);
- tpacpi_input_send_radiosw();
- tpacpi_input_send_tabletsw();
- }
+ tpacpi_inputdev->open = &hotkey_inputdev_open;
+ tpacpi_inputdev->close = &hotkey_inputdev_close;
- return (tp_features.hotkey)? 0 : 1;
-}
+ hotkey_poll_setup_safe(1);
+ tpacpi_input_send_radiosw();
+ tpacpi_input_send_tabletsw();
-static void hotkey_exit(void)
-{
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- hotkey_poll_stop_sync();
-#endif
+ return 0;
- if (tp_features.hotkey) {
- dbg_printk(TPACPI_DBG_EXIT,
- "restoring original hot key mask\n");
- /* no short-circuit boolean operator below! */
- if ((hotkey_mask_set(hotkey_orig_mask) |
- hotkey_status_set(hotkey_orig_status)) != 0)
- printk(TPACPI_ERR
- "failed to restore hot key mask "
- "to BIOS defaults\n");
- }
+err_exit:
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+ hotkey_dev_attributes = NULL;
- if (hotkey_dev_attributes) {
- delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
- hotkey_dev_attributes = NULL;
- }
+ return (res < 0)? res : 1;
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
static int __init light_init(struct ibm_init_struct *iibm)
{
- int rc = 0;
+ int rc;
vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
tp_features.light_status =
acpi_evalf(ec_handle, NULL, "KBLT", "qv");
- vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
- str_supported(tp_features.light));
+ vdbg_printk(TPACPI_DBG_INIT, "light is %s, light status is %s\n",
+ str_supported(tp_features.light),
+ str_supported(tp_features.light_status));
- if (tp_features.light) {
- rc = led_classdev_register(&tpacpi_pdev->dev,
- &tpacpi_led_thinklight.led_classdev);
- }
+ if (!tp_features.light)
+ return 1;
+
+ rc = led_classdev_register(&tpacpi_pdev->dev,
+ &tpacpi_led_thinklight.led_classdev);
if (rc < 0) {
tp_features.light = 0;
tp_features.light_status = 0;
- } else {
- rc = (tp_features.light)? 0 : 1;
+ } else {
+ rc = 0;
}
+
return rc;
}
"tpacpi::standby",
};
-static int led_get_status(unsigned int led)
+static int led_get_status(const unsigned int led)
{
int status;
enum led_status_t led_s;
/* not reached */
}
-static int led_set_status(unsigned int led, enum led_status_t ledstatus)
+static int led_set_status(const unsigned int led,
+ const enum led_status_t ledstatus)
{
/* off, on, blink. Index is led_status_t */
- static const int led_sled_arg1[] = { 0, 1, 3 };
- static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
- static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
- static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
+ static const unsigned int led_sled_arg1[] = { 0, 1, 3 };
+ static const unsigned int led_led_arg1[] = { 0, 0x80, 0xc0 };
int rc = 0;
switch (led_supported) {
case TPACPI_LED_570:
- /* 570 */
- led = 1 << led;
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_sled_arg1[ledstatus]))
- rc = -EIO;
- break;
+ /* 570 */
+ if (led > 7)
+ return -EINVAL;
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ (1 << led), led_sled_arg1[ledstatus]))
+ rc = -EIO;
+ break;
case TPACPI_LED_OLD:
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
- led = 1 << led;
- rc = ec_write(TPACPI_LED_EC_HLMS, led);
- if (rc >= 0)
- rc = ec_write(TPACPI_LED_EC_HLBL,
- led * led_exp_hlbl[ledstatus]);
- if (rc >= 0)
- rc = ec_write(TPACPI_LED_EC_HLCL,
- led * led_exp_hlcl[ledstatus]);
- break;
+ /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+ if (led > 7)
+ return -EINVAL;
+ rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led));
+ if (rc >= 0)
+ rc = ec_write(TPACPI_LED_EC_HLBL,
+ (ledstatus == TPACPI_LED_BLINK) << led);
+ if (rc >= 0)
+ rc = ec_write(TPACPI_LED_EC_HLCL,
+ (ledstatus != TPACPI_LED_OFF) << led);
+ break;
case TPACPI_LED_NEW:
- /* all others */
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_led_arg1[ledstatus]))
- rc = -EIO;
- break;
+ /* all others */
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ led, led_led_arg1[ledstatus]))
+ rc = -EIO;
+ break;
default:
rc = -ENXIO;
}
}
kfree(tpacpi_leds);
- tpacpi_leds = NULL;
}
static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_EXIT,
"calling backlight_device_unregister()\n");
backlight_device_unregister(ibm_backlight_device);
- ibm_backlight_device = NULL;
}
}
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
- if (!(rc < 0))
- rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
- &driver_attr_fan_watchdog);
if (rc < 0)
return rc;
+
+ rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
+ &driver_attr_fan_watchdog);
+ if (rc < 0) {
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
+ &fan_attr_group);
+ return rc;
+ }
return 0;
} else
return 1;
int ret;
/*
- * Allocate interrupt.
- */
-
- ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
- if (ret)
- return ret;
-
- host->irq = irq;
-
- /*
- * Set up tasklets.
+ * Set up tasklets. Must be done before requesting interrupt.
*/
tasklet_init(&host->card_tasklet, wbsd_tasklet_card,
(unsigned long)host);
tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish,
(unsigned long)host);
+ /*
+ * Allocate interrupt.
+ */
+ ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ return ret;
+
+ host->irq = irq;
+
return 0;
}
return res;
}
+EXPORT_SYMBOL_GPL(lance_open);
int lance_close (struct net_device *dev)
{
return 0;
}
+EXPORT_SYMBOL_GPL(lance_close);
void lance_tx_timeout(struct net_device *dev)
{
dev->trans_start = jiffies;
netif_wake_queue (dev);
}
-
+EXPORT_SYMBOL_GPL(lance_tx_timeout);
int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
return 0;
}
+EXPORT_SYMBOL_GPL(lance_start_xmit);
/* taken from the depca driver via a2065.c */
static void lance_load_multicast (struct net_device *dev)
if (!stopped)
netif_start_queue (dev);
}
+EXPORT_SYMBOL_GPL(lance_set_multicast);
#ifdef CONFIG_NET_POLL_CONTROLLER
void lance_poll(struct net_device *dev)
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
return 0;
}
- return 1;
}
/* see if SPI FLAGS exist ? */
return atl1_write_phy_reg(hw, 30, 0);
}
-/*
- * Force the PHY into power saving mode using vendor magic.
- */
-#ifdef CONFIG_PM
-static void atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
- atl1_write_phy_reg(hw, MII_DBG_ADDR, 0);
- atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E);
- atl1_write_phy_reg(hw, MII_DBG_ADDR, 2);
- atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
- atl1_write_phy_reg(hw, MII_DBG_ADDR, 3);
- atl1_write_phy_reg(hw, MII_DBG_DATA, 0);
-
-}
-#endif
-
/*
* Resets the PHY and make all config validate
* hw - Struct containing variables accessed by shared code
ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
- atl1_phy_enter_power_saving(hw);
hw->phy_configured = false;
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
exit:
if (!netif_running(bp->dev))
return;
- bp->in_reset_task = 1;
bnx2_netif_stop(bp);
bnx2_init_nic(bp);
atomic_set(&bp->intr_sem, 1);
bnx2_netif_start(bp);
- bp->in_reset_task = 0;
}
static void
struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
- /* Calling flush_scheduled_work() may deadlock because
- * linkwatch_event() may be on the workqueue and it will try to get
- * the rtnl_lock which we are holding.
- */
- while (bp->in_reset_task)
- msleep(1);
+ cancel_work_sync(&bp->reset_task);
bnx2_disable_int_sync(bp);
bnx2_napi_disable(bp);
int current_interval;
struct timer_list timer;
struct work_struct reset_task;
- int in_reset_task;
/* Used to synchronize phy accesses. */
spinlock_t phy_lock;
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
* UDP CSUM errata workaround by Arik Gendelman
* Slowpath rework by Vladislav Zolotarov
"Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
+MODULE_AUTHOR("Eliezer Tamir");
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
*/
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
*/
#ifndef BNX2X_INIT_H
mutex_lock(&ehea_bcmc_regs.lock);
/* Deregister old MAC in pHYP */
- ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
- if (ret)
- goto out_upregs;
+ if (port->state == EHEA_PORT_UP) {
+ ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+ if (ret)
+ goto out_upregs;
+ }
port->mac_addr = cb0->port_mac_addr << 16;
/* Register new MAC in pHYP */
- ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
- if (ret)
- goto out_upregs;
+ if (port->state == EHEA_PORT_UP) {
+ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+ if (ret)
+ goto out_upregs;
+ }
ret = 0;
if (netif_msg_ifdown(port))
ehea_info("disabling port %s", dev->name);
- flush_scheduled_work();
+ cancel_work_sync(&port->reset_task);
+
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
mutex_unlock(&priv->lock);
}
-/*
- * Wait until the PHY operation is complete.
- */
-static int wait_phy_ready(struct enc28j60_net *priv)
+static unsigned long msec20_to_jiffies;
+
+static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
{
- unsigned long timeout = jiffies + 20 * HZ / 1000;
- int ret = 1;
+ unsigned long timeout = jiffies + msec20_to_jiffies;
/* 20 msec timeout read */
- while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) {
+ while ((nolock_regb_read(priv, reg) & mask) != val) {
if (time_after(jiffies, timeout)) {
if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME
- ": PHY ready timeout!\n");
- ret = 0;
- break;
+ dev_dbg(&priv->spi->dev,
+ "reg %02x ready timeout!\n", reg);
+ return -ETIMEDOUT;
}
cpu_relax();
}
- return ret;
+ return 0;
+}
+
+/*
+ * Wait until the PHY operation is complete.
+ */
+static int wait_phy_ready(struct enc28j60_net *priv)
+{
+ return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
}
/*
nolock_regw_write(priv, ETXNDL, end);
}
+/*
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive. (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
+{
+ if (netif_msg_drv(priv))
+ dev_dbg(&priv->spi->dev, "%s power...\n",
+ is_low ? "low" : "high");
+
+ mutex_lock(&priv->lock);
+ if (is_low) {
+ nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+ poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
+ poll_ready(priv, ECON1, ECON1_TXRTS, 0);
+ /* ECON2_VRPS was set during initialization */
+ nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+ } else {
+ nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+ poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+ /* caller sets ECON1_RXEN */
+ }
+ mutex_unlock(&priv->lock);
+}
+
static int enc28j60_hw_init(struct enc28j60_net *priv)
{
u8 reg;
priv->tx_retry_count = 0;
priv->max_pk_counter = 0;
priv->rxfilter = RXFILTER_NORMAL;
- /* enable address auto increment */
- nolock_regb_write(priv, ECON2, ECON2_AUTOINC);
+ /* enable address auto increment and voltage regulator powersave */
+ nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
static void enc28j60_hw_enable(struct enc28j60_net *priv)
{
- /* enable interrutps */
+ /* enable interrupts */
if (netif_msg_hw(priv))
printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
__FUNCTION__);
int ret = 0;
if (!priv->hw_enable) {
- if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) {
+ /* link is in low power mode now; duplex setting
+ * will take effect on next enc28j60_hw_init().
+ */
+ if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
priv->full_duplex = (duplex == DUPLEX_FULL);
- if (!enc28j60_hw_init(priv)) {
- if (netif_msg_drv(priv))
- dev_err(&ndev->dev,
- "hw_reset() failed\n");
- ret = -EINVAL;
- }
- } else {
+ else {
if (netif_msg_link(priv))
dev_warn(&ndev->dev,
"unsupported link setting\n");
}
return -EADDRNOTAVAIL;
}
- /* Reset the hardware here */
+ /* Reset the hardware here (and take it out of low power mode) */
+ enc28j60_lowpower(priv, false);
enc28j60_hw_disable(priv);
if (!enc28j60_hw_init(priv)) {
if (netif_msg_ifup(priv))
printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
enc28j60_hw_disable(priv);
+ enc28j60_lowpower(priv, true);
netif_stop_queue(dev);
return 0;
dev->watchdog_timeo = TX_TIMEOUT;
SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
+ enc28j60_lowpower(priv, true);
+
ret = register_netdev(dev);
if (ret) {
if (netif_msg_probe(priv))
return ret;
}
-static int enc28j60_remove(struct spi_device *spi)
+static int __devexit enc28j60_remove(struct spi_device *spi)
{
struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
static struct spi_driver enc28j60_driver = {
.driver = {
.name = DRV_NAME,
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
- },
+ },
.probe = enc28j60_probe,
.remove = __devexit_p(enc28j60_remove),
};
static int __init enc28j60_init(void)
{
+ msec20_to_jiffies = msecs_to_jiffies(20);
+
return spi_register_driver(&enc28j60_driver);
}
MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
#define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
- NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN )
+ NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
static int debug = -1; /* the above default */
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "debugging messages level");
dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name);
}
+static void nv_msi_workaround(struct fe_priv *np)
+{
+
+ /* Need to toggle the msi irq mask within the ethernet device,
+ * otherwise, future interrupts will not be detected.
+ */
+ if (np->msi_flags & NV_MSI_ENABLED) {
+ u8 __iomem *base = np->base;
+
+ writel(0, base + NvRegMSIIrqMask);
+ writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+ }
+}
+
static irqreturn_t nv_nic_irq(int foo, void *data)
{
struct net_device *dev = (struct net_device *) data;
if (!(events & np->irqmask))
break;
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
nv_tx_done(dev);
spin_unlock(&np->lock);
if (!(events & np->irqmask))
break;
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
spin_unlock(&np->lock);
if (!(events & NVREG_IRQ_TIMER))
return IRQ_RETVAL(0);
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
np->intr_test = 1;
spin_unlock(&np->lock);
unsigned char tmp[1];
bc->work_running = 0;
- flush_scheduled_work();
+ cancel_delayed_work_sync(&bc->run_work);
bc->stat = EPP_DCDBIT;
tmp[0] = 0;
pp->ops->epp_write_addr(pp, tmp, 1, 0);
config IBM_NEW_EMAC
tristate "IBM EMAC Ethernet support"
depends on PPC_DCR && PPC_MERGE
+ select CRC32
help
This driver supports the IBM EMAC family of Ethernet controllers
typically found on 4xx embedded PowerPC chips, but also on the
/* NIC to be configured in promiscuous mode. */
receivemode = IPG_RM_RECEIVEALLFRAMES;
} else if ((dev->flags & IFF_ALLMULTI) ||
- (dev->flags & IFF_MULTICAST &
+ ((dev->flags & IFF_MULTICAST) &&
(dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) {
/* NIC to be configured to receive all multicast
* frames. */
receivemode |= IPG_RM_RECEIVEMULTICAST;
- } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) {
+ } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) {
/* NIC to be configured to receive selected
* multicast addresses. */
receivemode |= IPG_RM_RECEIVEMULTICASTHASH;
config MCS_FIR
tristate "MosChip MCS7780 IrDA-USB dongle"
depends on IRDA && USB && EXPERIMENTAL
+ select CRC32
help
Say Y or M here if you want to build support for the MosChip
MCS7780 IrDA-USB bridge device driver.
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
- hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES;
- hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
/* PHY ops are filled in by default properly for Fiber only */
u8 revision_id;
u16 board_type;
- u16 max_ports;
struct netxen_board_info boardcfg;
u32 xg_linkup;
u32 qg_linksup;
unsigned char mac_addr[ETH_ALEN];
int mtu;
int portnum;
+ u8 physical_port;
struct work_struct watchdog_task;
struct timer_list watchdog_timer;
/* Functions from netxen_nic_isr.c */
void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
-void netxen_initialize_adapter_hw(struct netxen_adapter *adapter);
void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
struct pci_dev **used_dev);
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards)
-static inline void get_brd_port_by_type(u32 type, int *ports)
-{
- int i, found = 0;
- for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) {
- if (netxen_boards[i].brdtype == type) {
- *ports = netxen_boards[i].ports;
- found = 1;
- break;
- }
- }
- if (!found)
- *ports = 0;
-}
-
static inline void get_brd_name_by_type(u32 type, char *name)
{
int i, found = 0;
extern struct ethtool_ops netxen_nic_ethtool_ops;
-extern int physical_port[]; /* physical port # from virtual port.*/
#endif /* __NETXEN_NIC_H_ */
for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) {
/* GB: port specific registers */
if (mode == 0 && i >= 19)
- window = physical_port[adapter->portnum] *
+ window = adapter->physical_port *
NETXEN_NIC_PORT_WINDOW;
NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode].
{
struct netxen_adapter *adapter = netdev_priv(dev);
__u32 val;
- int port = physical_port[adapter->portnum];
+ int port = adapter->physical_port;
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
{
struct netxen_adapter *adapter = netdev_priv(dev);
__u32 val;
- int port = physical_port[adapter->portnum];
+ int port = adapter->physical_port;
/* read mode */
if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
}
adapter->intr_scheme = readl(
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
- printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
- adapter->intr_scheme);
adapter->msi_mode = readl(
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
- DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
addr = netxen_alloc(adapter->ahw.pdev,
sizeof(struct netxen_ring_ctx) +
(dma_addr_t *) & adapter->ctx_desc_phys_addr,
&adapter->ctx_desc_pdev);
- printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n",
- (unsigned long long) adapter->ctx_desc_phys_addr);
if (addr == NULL) {
DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
err = -ENOMEM;
adapter->max_tx_desc_count,
(dma_addr_t *) & hw->cmd_desc_phys_addr,
&adapter->ahw.cmd_desc_pdev);
- printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n",
- (unsigned long long) hw->cmd_desc_phys_addr);
if (addr == NULL) {
DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
{
netxen_nic_write_w0(adapter,
- NETXEN_NIU_GB_MAX_FRAME_SIZE(
- physical_port[adapter->portnum]), new_mtu);
+ NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
+ new_mtu);
return 0;
}
int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
{
new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
- if (physical_port[adapter->portnum] == 0)
+ if (adapter->physical_port == 0)
netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
new_mtu);
else
void netxen_nic_init_niu_gb(struct netxen_adapter *adapter)
{
- netxen_niu_gbe_init_port(adapter, physical_port[adapter->portnum]);
+ netxen_niu_gbe_init_port(adapter, adapter->physical_port);
}
void
void netxen_nic_flash_print(struct netxen_adapter *adapter)
{
- int valid = 1;
u32 fw_major = 0;
u32 fw_minor = 0;
u32 fw_build = 0;
__le32 *ptr32;
struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
- if (board_info->magic != NETXEN_BDINFO_MAGIC) {
- printk
- ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n",
- board_info->magic, NETXEN_BDINFO_MAGIC);
- valid = 0;
- }
- if (board_info->header_version != NETXEN_BDINFO_VERSION) {
- printk("NetXen Unknown board config version."
- " Read %x, expected %x\n",
- board_info->header_version, NETXEN_BDINFO_VERSION);
- valid = 0;
- }
- if (valid) {
- ptr32 = (u32 *)&serial_num;
- addr = NETXEN_USER_START +
- offsetof(struct netxen_new_user_info, serial_num);
- for (i = 0; i < 8; i++) {
- if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
- printk("%s: ERROR reading %s board userarea.\n",
- netxen_nic_driver_name,
- netxen_nic_driver_name);
- return;
- }
- ptr32++;
- addr += sizeof(u32);
+
+ adapter->driver_mismatch = 0;
+
+ ptr32 = (u32 *)&serial_num;
+ addr = NETXEN_USER_START +
+ offsetof(struct netxen_new_user_info, serial_num);
+ for (i = 0; i < 8; i++) {
+ if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
+ printk("%s: ERROR reading %s board userarea.\n",
+ netxen_nic_driver_name,
+ netxen_nic_driver_name);
+ adapter->driver_mismatch = 1;
+ return;
}
+ ptr32++;
+ addr += sizeof(u32);
+ }
+
+ fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
+ NETXEN_FW_VERSION_MAJOR));
+ fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
+ NETXEN_FW_VERSION_MINOR));
+ fw_build =
+ readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
+ if (adapter->portnum == 0) {
get_brd_name_by_type(board_info->board_type, brd_name);
printk("NetXen %s Board S/N %s Chip id 0x%x\n",
- brd_name, serial_num, board_info->chip_id);
-
- printk("NetXen %s Board #%d, Chip id 0x%x\n",
- board_info->board_type == 0x0b ? "XGB" : "GBE",
- board_info->board_num, board_info->chip_id);
- fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
- NETXEN_FW_VERSION_MAJOR));
- fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
- NETXEN_FW_VERSION_MINOR));
- fw_build =
- readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
-
- printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor,
- fw_build);
+ brd_name, serial_num, board_info->chip_id);
+ printk("NetXen Firmware version %d.%d.%d\n", fw_major,
+ fw_minor, fw_build);
}
+
if (fw_major != _NETXEN_NIC_LINUX_MAJOR) {
- printk(KERN_ERR "The mismatch in driver version and firmware "
- "version major number\n"
- "Driver version major number = %d \t"
- "Firmware version major number = %d \n",
- _NETXEN_NIC_LINUX_MAJOR, fw_major);
adapter->driver_mismatch = 1;
}
if (fw_minor != _NETXEN_NIC_LINUX_MINOR &&
fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) {
- printk(KERN_ERR "The mismatch in driver version and firmware "
- "version minor number\n"
- "Driver version minor number = %d \t"
- "Firmware version minor number = %d \n",
- _NETXEN_NIC_LINUX_MINOR, fw_minor);
adapter->driver_mismatch = 1;
}
- if (adapter->driver_mismatch)
- printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n",
- fw_major, fw_minor);
+ if (adapter->driver_mismatch) {
+ printk(KERN_ERR "%s: driver and firmware version mismatch\n",
+ adapter->netdev->name);
+ return;
+ }
+
+ switch (adapter->ahw.board_type) {
+ case NETXEN_NIC_GBE:
+ dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
+ adapter->netdev->name);
+ break;
+ case NETXEN_NIC_XGBE:
+ dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
+ adapter->netdev->name);
+ break;
+ }
}
}
}
-void netxen_initialize_adapter_hw(struct netxen_adapter *adapter)
-{
- int ports = 0;
- struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
-
- if (netxen_nic_get_board_info(adapter) != 0)
- printk("%s: Error getting board config info.\n",
- netxen_nic_driver_name);
- get_brd_port_by_type(board_info->board_type, &ports);
- if (ports == 0)
- printk(KERN_ERR "%s: Unknown board type\n",
- netxen_nic_driver_name);
- adapter->ahw.max_ports = ports;
-}
-
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
{
switch (adapter->ahw.board_type) {
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
{
- int addr, val, status;
+ int addr, val;
int n, i;
int init_delay = 0;
struct crb_addr_pair *buf;
u32 off;
/* resetall */
- status = netxen_nic_get_board_info(adapter);
- if (status)
- printk("%s: netxen_pinit_from_rom: Error getting board info\n",
- netxen_nic_driver_name);
-
netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
NETXEN_ROMBUS_RESET);
netxen_nic_pci_change_crbwindow(adapter, 1);
}
if (init_delay == 1) {
- msleep(2000);
+ msleep(1000);
init_delay = 0;
}
- msleep(20);
+ msleep(1);
}
kfree(buf);
void netxen_free_adapter_offload(struct netxen_adapter *adapter)
{
+ int i;
+
if (adapter->dummy_dma.addr) {
- pci_free_consistent(adapter->ahw.pdev,
+ i = 100;
+ do {
+ if (dma_watchdog_shutdown_request(adapter) == 1)
+ break;
+ msleep(50);
+ if (dma_watchdog_shutdown_poll_result(adapter) == 1)
+ break;
+ } while (--i);
+
+ if (i) {
+ pci_free_consistent(adapter->ahw.pdev,
NETXEN_HOST_DUMMY_DMA_SIZE,
adapter->dummy_dma.addr,
adapter->dummy_dma.phys_addr);
- adapter->dummy_dma.addr = NULL;
+ adapter->dummy_dma.addr = NULL;
+ } else {
+ printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+ adapter->netdev->name);
+ }
}
}
/* verify the offset */
val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
- val = val >> physical_port[adapter->portnum];
+ val = val >> adapter->physical_port;
if (val == adapter->ahw.qg_linksup)
return;
/* WINDOW = 1 */
val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
- val >>= (physical_port[adapter->portnum] * 8);
+ val >>= (adapter->physical_port * 8);
val &= 0xff;
if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) {
static irqreturn_t netxen_intr(int irq, void *data);
static irqreturn_t netxen_msi_intr(int irq, void *data);
-int physical_port[] = {0, 1, 2, 3};
-
/* PCI Device ID Table */
static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(0x4040, 0x0001)},
- {PCI_DEVICE(0x4040, 0x0002)},
- {PCI_DEVICE(0x4040, 0x0003)},
- {PCI_DEVICE(0x4040, 0x0004)},
- {PCI_DEVICE(0x4040, 0x0005)},
- {PCI_DEVICE(0x4040, 0x0024)},
- {PCI_DEVICE(0x4040, 0x0025)},
+ {PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)},
+ {PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)},
+ {PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)},
+ {PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)},
+ {PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)},
+ {PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)},
+ {PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)},
{0,}
};
int pci_func_id = PCI_FUNC(pdev->devfn);
DECLARE_MAC_BUF(mac);
- printk(KERN_INFO "%s \n", netxen_nic_driver_string);
+ if (pci_func_id == 0)
+ printk(KERN_INFO "%s \n", netxen_nic_driver_string);
if (pdev->class != 0x020000) {
- printk(KERN_ERR"NetXen function %d, class %x will not "
+ printk(KERN_DEBUG "NetXen function %d, class %x will not "
"be enabled.\n",pci_func_id, pdev->class);
return -ENODEV;
}
*/
adapter->curr_window = 255;
- /* initialize the adapter */
- netxen_initialize_adapter_hw(adapter);
+ if (netxen_nic_get_board_info(adapter) != 0) {
+ printk("%s: Error getting board config info.\n",
+ netxen_nic_driver_name);
+ err = -EIO;
+ goto err_out_iounmap;
+ }
/*
* Adapter in our case is quad port so initialize it before
netxen_initialize_adapter_sw(adapter); /* initialize the buffers in adapter */
/* Mezz cards have PCI function 0,2,3 enabled */
- if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ)
- && (pci_func_id >= 2))
+ switch (adapter->ahw.boardcfg.board_type) {
+ case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
+ case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
+ if (pci_func_id >= 2)
adapter->portnum = pci_func_id - 2;
-
-#ifdef CONFIG_IA64
- if(adapter->portnum == 0) {
- netxen_pinit_from_rom(adapter, 0);
- udelay(500);
- netxen_load_firmware(adapter);
+ break;
+ default:
+ break;
}
-#endif
init_timer(&adapter->watchdog_timer);
adapter->ahw.xg_linkup = 0;
err = -ENODEV;
goto err_out_free_dev;
}
+ } else {
+ writel(0, NETXEN_CRB_NORMALIZE(adapter,
+ CRB_CMDPEG_STATE));
+ netxen_pinit_from_rom(adapter, 0);
+ msleep(1);
+ netxen_load_firmware(adapter);
+ netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
}
/* clear the register for future unloads/loads */
writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_INFO "State: 0x%0x\n",
+ dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n",
readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
/*
/*
* See if the firmware gave us a virtual-physical port mapping.
*/
+ adapter->physical_port = adapter->portnum;
i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum)));
if (i != 0x55555555)
- physical_port[adapter->portnum] = i;
+ adapter->physical_port = i;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
goto err_out_free_dev;
}
+ netxen_nic_flash_print(adapter);
pci_set_drvdata(pdev, adapter);
- switch (adapter->ahw.board_type) {
- case NETXEN_NIC_GBE:
- printk(KERN_INFO "%s: QUAD GbE board initialized\n",
- netxen_nic_driver_name);
- break;
-
- case NETXEN_NIC_XGBE:
- printk(KERN_INFO "%s: XGbE board initialized\n",
- netxen_nic_driver_name);
- break;
- }
-
- adapter->driver_mismatch = 0;
-
return 0;
err_out_free_dev:
vfree(adapter->cmd_buf_arr);
- if (adapter->portnum == 0) {
- if (init_firmware_done) {
- i = 100;
- do {
- if (dma_watchdog_shutdown_request(adapter) == 1)
- break;
- msleep(100);
- if (dma_watchdog_shutdown_poll_result(adapter) == 1)
- break;
- } while (--i);
-
- if (i == 0)
- printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
- netdev->name);
-
- /* clear the register for future unloads/loads */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_INFO "State: 0x%0x\n",
- readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
-
- /* leave the hw in the same state as reboot */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
- netxen_pinit_from_rom(adapter, 0);
- msleep(1);
- netxen_load_firmware(adapter);
- netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
- }
-
- /* clear the register for future unloads/loads */
- writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
- printk(KERN_INFO "State: 0x%0x\n",
- readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
-
- i = 100;
- do {
- if (dma_watchdog_shutdown_request(adapter) == 1)
- break;
- msleep(100);
- if (dma_watchdog_shutdown_poll_result(adapter) == 1)
- break;
- } while (--i);
-
- if (i) {
- netxen_free_adapter_offload(adapter);
- } else {
- printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
- netdev->name);
- }
- }
+ if (adapter->portnum == 0)
+ netxen_free_adapter_offload(adapter);
if (adapter->irq)
free_irq(adapter->irq, adapter);
irq_handler_t handler;
unsigned long flags = IRQF_SAMPLE_RANDOM;
+ if (adapter->driver_mismatch)
+ return -EIO;
+
if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
err = netxen_init_firmware(adapter);
if (err != 0) {
printk(KERN_ERR "Failed to init firmware\n");
return -EIO;
}
- netxen_nic_flash_print(adapter);
/* setup all the resources for the Phantom... */
/* this include the descriptors for rcv, tx, and status */
if (adapter->set_mtu)
adapter->set_mtu(adapter, netdev->mtu);
- if (!adapter->driver_mismatch)
- mod_timer(&adapter->watchdog_timer, jiffies);
+ mod_timer(&adapter->watchdog_timer, jiffies);
napi_enable(&adapter->napi);
netxen_nic_enable_int(adapter);
- if (!adapter->driver_mismatch)
- netif_start_queue(netdev);
+ netif_start_queue(netdev);
return 0;
}
long timeout = 0;
long result = 0;
long restore = 0;
- long phy = physical_port[adapter->portnum];
+ long phy = adapter->physical_port;
__u32 address;
__u32 command;
__u32 status;
long timeout = 0;
long result = 0;
long restore = 0;
- long phy = physical_port[adapter->portnum];
+ long phy = adapter->physical_port;
__u32 address;
__u32 command;
__u32 status;
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
{
- u32 portnum = physical_port[adapter->portnum];
+ u32 portnum = adapter->physical_port;
netxen_crb_writelit_adapter(adapter,
NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447);
{
u32 stationhigh;
u32 stationlow;
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
u8 val[8];
if (addr == NULL)
{
u8 temp[4];
u32 val;
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
unsigned char mac_addr[6];
int i;
DECLARE_MAC_BUF(mac);
int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
{
__u32 mac_cfg0;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_GBE_PORTS)
return -EINVAL;
int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
{
__u32 mac_cfg;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_XG_PORTS)
return -EINVAL;
netxen_niu_prom_mode_t mode)
{
__u32 reg;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_GBE_PORTS)
return -EINVAL;
int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
netxen_ethernet_macaddr_t addr)
{
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
u8 temp[4];
u32 val;
int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
netxen_ethernet_macaddr_t * addr)
{
- int phy = physical_port[adapter->portnum];
+ int phy = adapter->physical_port;
u32 stationhigh;
u32 stationlow;
u8 val[8];
netxen_niu_prom_mode_t mode)
{
__u32 reg;
- u32 port = physical_port[adapter->portnum];
+ u32 port = adapter->physical_port;
if (port > NETXEN_NIU_MAX_XG_PORTS)
return -EINVAL;
struct pppox_sock *relay_po;
if (sk->sk_state & PPPOX_BOUND) {
- struct pppoe_hdr *ph = pppoe_hdr(skb);
- int len = ntohs(ph->length);
- skb_pull_rcsum(skb, sizeof(struct pppoe_hdr));
- if (pskb_trim_rcsum(skb, len))
- goto abort_kfree;
-
ppp_input(&po->chan, skb);
} else if (sk->sk_state & PPPOX_RELAY) {
relay_po = get_item_by_addr(&po->pppoe_relay);
if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0)
goto abort_put;
- skb_pull(skb, sizeof(struct pppoe_hdr));
if (!__pppoe_xmit(sk_pppox(relay_po), skb))
goto abort_put;
} else {
{
struct pppoe_hdr *ph;
struct pppox_sock *po;
+ int len;
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
goto drop;
ph = pppoe_hdr(skb);
+ len = ntohs(ph->length);
+
+ skb_pull_rcsum(skb, sizeof(*ph));
+ if (skb->len < len)
+ goto drop;
po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
- if (po != NULL)
- return sk_receive_skb(sk_pppox(po), skb, 0);
+ if (!po)
+ goto drop;
+
+ if (pskb_trim_rcsum(skb, len))
+ goto drop;
+
+ return sk_receive_skb(sk_pppox(po), skb, 0);
+
drop:
kfree_skb(skb);
out:
if (dev_net(dev) != &init_net)
goto abort;
- if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
- goto abort;
-
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
+ if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
+ goto abort;
+
ph = pppoe_hdr(skb);
if (ph->code != PADT_CODE)
goto abort;
m->msg_namelen = 0;
if (skb) {
- struct pppoe_hdr *ph = pppoe_hdr(skb);
- const int len = ntohs(ph->length);
-
- error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len);
+ total_len = min_t(size_t, total_len, skb->len);
+ error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
if (error == 0)
- error = len;
+ error = total_len;
}
kfree_skb(skb);
err = 0;
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &err);
- if (skb) {
- err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data,
- skb->len);
- if (err < 0)
- goto do_skb_free;
- err = skb->len;
- }
-do_skb_free:
+ if (!skb)
+ goto end;
+
+ if (len > skb->len)
+ len = skb->len;
+ else if (len < skb->len)
+ msg->msg_flags |= MSG_TRUNC;
+
+ err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len);
+ if (likely(err == 0))
+ err = len;
+
kfree_skb(skb);
end:
return err;
}
/* Timer active again */
- mod_timer(&lp->timer, jiffies + round_jiffies(HZ));
+ mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
}
/* Read/set MAC address routines */
continue;
break;
}
- if (rc)
+ if (rc) {
EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue);
+ efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
+ }
/* Remove RX descriptor ring from card */
EFX_ZERO_OWORD(rx_desc_ptr);
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
if (err) {
printk(KERN_ERR PFX "%s: could not up: %d\n",
dev->name, err);
+ rtnl_lock();
dev_close(dev);
+ rtnl_unlock();
goto out;
}
}
/* work queue */
struct work_struct phy_configure;
- int work_pending;
int tx_throttle;
spinlock_t lock;
* We should not be called if phy_type is zero.
*/
if (lp->phy_type == 0)
- goto smc911x_phy_configure_exit_nolock;
+ return;
if (smc911x_phy_reset(dev, phyaddr)) {
printk("%s: PHY reset timed out\n", dev->name);
- goto smc911x_phy_configure_exit_nolock;
+ return;
}
spin_lock_irqsave(&lp->lock, flags);
smc911x_phy_configure_exit:
spin_unlock_irqrestore(&lp->lock, flags);
-smc911x_phy_configure_exit_nolock:
- lp->work_pending = 0;
}
/*
* smc911x_phy_configure() calls msleep() which calls schedule_timeout()
* which calls schedule(). Hence we use a work queue.
*/
- if (lp->phy_type != 0) {
- if (schedule_work(&lp->phy_configure)) {
- lp->work_pending = 1;
- }
- }
+ if (lp->phy_type != 0)
+ schedule_work(&lp->phy_configure);
/* We can accept TX packets again */
dev->trans_start = jiffies;
if (lp->phy_type != 0) {
/* We need to ensure that no calls to
* smc911x_phy_configure are pending.
-
- * flush_scheduled_work() cannot be called because we
- * are running with the netlink semaphore held (from
- * devinet_ioctl()) and the pending work queue
- * contains linkwatch_event() (scheduled by
- * netif_carrier_off() above). linkwatch_event() also
- * wants the netlink semaphore.
*/
- while (lp->work_pending)
- schedule();
+ cancel_work_sync(&lp->phy_configure);
smc911x_phy_powerdown(dev, lp->mii.phy_id);
}
/* We need to ensure that no calls to smc_phy_configure are
pending.
-
- flush_scheduled_work() cannot be called because we are
- running with the netlink semaphore held (from
- devinet_ioctl()) and the pending work queue contains
- linkwatch_event() (scheduled by netif_carrier_off()
- above). linkwatch_event() also wants the netlink semaphore.
*/
- while(lp->work_pending)
- yield();
+ cancel_work_sync(&lp->phy_configure);
bmcr = smc_phy_read(dev, phy, MII_BMCR);
smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
smc_phy_configure_exit:
SMC_SELECT_BANK(lp, 2);
spin_unlock_irq(&lp->lock);
- lp->work_pending = 0;
}
/*
* smc_phy_configure() calls msleep() which calls schedule_timeout()
* which calls schedule(). Hence we use a work queue.
*/
- if (lp->phy_type != 0) {
- if (schedule_work(&lp->phy_configure)) {
- lp->work_pending = 1;
- }
- }
+ if (lp->phy_type != 0)
+ schedule_work(&lp->phy_configure);
/* We can accept TX packets again */
dev->trans_start = jiffies;
#define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
# endif
/* check if the mac in reg is valid */
-#define SMC_GET_MAC_ADDR(addr) \
+#define SMC_GET_MAC_ADDR(lp, addr) \
do { \
unsigned int __v; \
- __v = SMC_inw(ioaddr, ADDR0_REG); \
+ __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \
addr[0] = __v; addr[1] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR1_REG); \
+ __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \
addr[2] = __v; addr[3] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR2_REG); \
+ __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \
addr[4] = __v; addr[5] = __v >> 8; \
if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
random_ether_addr(addr); \
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.92"
-#define DRV_MODULE_RELDATE "May 2, 2008"
+#define DRV_MODULE_VERSION "3.92.1"
+#define DRV_MODULE_RELDATE "June 9, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
GRC_LCLCTRL_GPIO_OUTPUT0 |
GRC_LCLCTRL_GPIO_OUTPUT1),
100);
+ } else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+ /* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
+ u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OE2 |
+ GRC_LCLCTRL_GPIO_OUTPUT0 |
+ GRC_LCLCTRL_GPIO_OUTPUT1 |
+ tp->grc_local_ctrl;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+ grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+ grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
} else {
u32 no_gpio2;
u32 grc_local_ctrl = 0;
err |= tg3_readphy(tp, MII_BMCR, &bmcr);
if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
- (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
- tp->link_config.flowctrl == tp->link_config.active_flowctrl) {
+ (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
/* do nothing, just check for link up at the end */
} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
u32 adv, new_adv;
(cmd->speed == SPEED_1000))
return -EINVAL;
else if ((cmd->speed == SPEED_1000) &&
- (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+ (tp->tg3_flags & TG3_FLAG_10_100_ONLY))
return -EINVAL;
tg3_full_lock(tp, 0);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+ if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+ /* Turn off the debug UART. */
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+ if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+ /* Keep VMain power. */
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OUTPUT0;
+ }
+
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
void __iomem *ioaddr = tp->base_addr;
unsigned long flags;
- flush_scheduled_work();
+ cancel_work_sync(&tp->media_work);
#ifdef CONFIG_TULIP_NAPI
napi_disable(&tp->napi);
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
+ if (tun->flags & TUN_NO_PI) {
+ switch (skb->data[0] & 0xf0) {
+ case 0x40:
+ pi.proto = htons(ETH_P_IP);
+ break;
+ case 0x60:
+ pi.proto = htons(ETH_P_IPV6);
+ break;
+ default:
+ tun->dev->stats.rx_dropped++;
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+ }
+
skb_reset_mac_header(skb);
skb->protocol = pi.proto;
skb->dev = tun->dev;
usb_kill_urb(kaweth->rx_urb);
usb_kill_urb(kaweth->tx_urb);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&kaweth->lowmem_work);
/* a scheduled work may have resubmitted,
we hit them again */
/* The skb we couldn't send because buffers were full. */
struct sk_buff *last_xmit_skb;
+ /* If we need to free in a timer, this is it. */
+ struct timer_list xmit_free_timer;
+
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
/* For cleaning up after transmission. */
struct tasklet_struct tasklet;
+ bool free_in_tasklet;
/* Receive & send queues. */
struct sk_buff_head recv;
/* Suppress further interrupts. */
svq->vq_ops->disable_cb(svq);
- /* We were waiting for more output buffers. */
+ /* We were probably waiting for more output buffers. */
netif_wake_queue(vi->dev);
/* Make sure we re-xmit last_xmit_skb: if there are no more packets
BUG_ON(len > MAX_PACKET_LEN);
skb_trim(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
- pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
- ntohs(skb->protocol), skb->len, skb->pkt_type);
+
dev->stats.rx_bytes += skb->len;
dev->stats.rx_packets++;
goto frame_err;
}
+ skb->protocol = eth_type_trans(skb, dev);
+ pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
+ ntohs(skb->protocol), skb->len, skb->pkt_type);
+
if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
}
}
+/* If the virtio transport doesn't always notify us when all in-flight packets
+ * are consumed, we fall back to using this function on a timer to free them. */
+static void xmit_free(unsigned long data)
+{
+ struct virtnet_info *vi = (void *)data;
+
+ netif_tx_lock(vi->dev);
+
+ free_old_xmit_skbs(vi);
+
+ if (!skb_queue_empty(&vi->send))
+ mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+ netif_tx_unlock(vi->dev);
+}
+
static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- int num;
+ int num, err;
struct scatterlist sg[2+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
vnet_hdr_to_sg(sg, skb);
num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
- return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+ err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+ if (!err && !vi->free_in_tasklet)
+ mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+ return err;
}
static void xmit_tasklet(unsigned long data)
vi->svq->vq_ops->kick(vi->svq);
vi->last_xmit_skb = NULL;
}
+ if (vi->free_in_tasklet)
+ free_old_xmit_skbs(vi);
netif_tx_unlock_bh(vi->dev);
}
vi->vdev = vdev;
vdev->priv = vi;
+ /* If they give us a callback when all buffers are done, we don't need
+ * the timer. */
+ vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
+
/* We expect two virtqueues, receive then send. */
vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
if (IS_ERR(vi->rvq)) {
tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
+ if (!vi->free_in_tasklet)
+ setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi);
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ if (!vi->free_in_tasklet)
+ del_timer_sync(&vi->xmit_free_timer);
+
/* Free our skbs in send and recv queues, if any. */
while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
kfree_skb(skb);
static unsigned int features[] = {
VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
- VIRTIO_NET_F_HOST_ECN,
+ VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY,
};
static struct virtio_driver virtio_net = {
/* Context information for a noise calculation (Link Quality). */
struct b43_noise_calculation {
- u8 channel_at_start;
bool calculation_running;
u8 nr_samples;
s8 samples[8][4];
{
struct b43_dmaring *ring;
int err;
- int nr_slots;
dma_addr_t dma_test;
ring = kzalloc(sizeof(*ring), GFP_KERNEL);
if (!ring)
goto out;
- ring->type = type;
- nr_slots = B43_RXRING_SLOTS;
+ ring->nr_slots = B43_RXRING_SLOTS;
if (for_tx)
- nr_slots = B43_TXRING_SLOTS;
+ ring->nr_slots = B43_TXRING_SLOTS;
- ring->meta = kcalloc(nr_slots, sizeof(struct b43_dmadesc_meta),
+ ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta),
GFP_KERNEL);
if (!ring->meta)
goto err_kfree_ring;
+
+ ring->type = type;
+ ring->dev = dev;
+ ring->mmio_base = b43_dmacontroller_base(type, controller_index);
+ ring->index = controller_index;
+ if (type == B43_DMA_64BIT)
+ ring->ops = &dma64_ops;
+ else
+ ring->ops = &dma32_ops;
if (for_tx) {
- ring->txhdr_cache = kcalloc(nr_slots,
+ ring->tx = 1;
+ ring->current_slot = -1;
+ } else {
+ if (ring->index == 0) {
+ ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE;
+ ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET;
+ } else if (ring->index == 3) {
+ ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE;
+ ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET;
+ } else
+ B43_WARN_ON(1);
+ }
+ spin_lock_init(&ring->lock);
+#ifdef CONFIG_B43_DEBUG
+ ring->last_injected_overflow = jiffies;
+#endif
+
+ if (for_tx) {
+ ring->txhdr_cache = kcalloc(ring->nr_slots,
b43_txhdr_size(dev),
GFP_KERNEL);
if (!ring->txhdr_cache)
b43_txhdr_size(dev), 1)) {
/* ugh realloc */
kfree(ring->txhdr_cache);
- ring->txhdr_cache = kcalloc(nr_slots,
+ ring->txhdr_cache = kcalloc(ring->nr_slots,
b43_txhdr_size(dev),
GFP_KERNEL | GFP_DMA);
if (!ring->txhdr_cache)
DMA_TO_DEVICE);
}
- ring->dev = dev;
- ring->nr_slots = nr_slots;
- ring->mmio_base = b43_dmacontroller_base(type, controller_index);
- ring->index = controller_index;
- if (type == B43_DMA_64BIT)
- ring->ops = &dma64_ops;
- else
- ring->ops = &dma32_ops;
- if (for_tx) {
- ring->tx = 1;
- ring->current_slot = -1;
- } else {
- if (ring->index == 0) {
- ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE;
- ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET;
- } else if (ring->index == 3) {
- ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE;
- ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET;
- } else
- B43_WARN_ON(1);
- }
- spin_lock_init(&ring->lock);
-#ifdef CONFIG_B43_DEBUG
- ring->last_injected_overflow = jiffies;
-#endif
-
err = alloc_ringmemory(ring);
if (err)
goto err_kfree_txhdr_cache;
b43_jssi_write(dev, 0x7F7F7F7F);
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
- B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
}
static void b43_calculate_link_quality(struct b43_wldev *dev)
if (dev->noisecalc.calculation_running)
return;
- dev->noisecalc.channel_at_start = dev->phy.channel;
dev->noisecalc.calculation_running = 1;
dev->noisecalc.nr_samples = 0;
/* Bottom half of Link Quality calculation. */
+ /* Possible race condition: It might be possible that the user
+ * changed to a different channel in the meantime since we
+ * started the calculation. We ignore that fact, since it's
+ * not really that much of a problem. The background noise is
+ * an estimation only anyway. Slightly wrong results will get damped
+ * by the averaging of the 8 sample rounds. Additionally the
+ * value is shortlived. So it will be replaced by the next noise
+ * calculation round soon. */
+
B43_WARN_ON(!dev->noisecalc.calculation_running);
- if (dev->noisecalc.channel_at_start != phy->channel)
- goto drop_calculation;
*((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
if (noise[0] == 0x7F || noise[1] == 0x7F ||
noise[2] == 0x7F || noise[3] == 0x7F)
average -= 48;
dev->stats.link_noise = average;
- drop_calculation:
dev->noisecalc.calculation_running = 0;
return;
}
- generate_new:
+generate_new:
b43_generate_noise_sample(dev);
}
netif_device_detach(dev);
}
- flush_scheduled_work();
+ cancel_work_sync(&local->reset_queue);
+ cancel_work_sync(&local->set_multicast_list_queue);
+ cancel_work_sync(&local->set_tim_queue);
+#ifndef PRISM2_NO_STATION_MODES
+ cancel_work_sync(&local->info_queue);
+#endif
+ cancel_work_sync(&local->comms_qual_update);
module_put(local->hw_module);
if (priv->workqueue) {
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
}
queue_work(priv->workqueue, &priv->down);
wake_up_interruptible(&priv->wait_command_queue);
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
schedule_work(&priv->link_down);
queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ);
priv->status &= ~STATUS_SCAN_FORCED;
#endif /* CONFIG_IPW2200_MONITOR */
+ /* Do queued direct scans first */
+ if (priv->status & STATUS_DIRECT_SCAN_PENDING) {
+ queue_delayed_work(priv->workqueue,
+ &priv->request_direct_scan, 0);
+ }
+
if (!(priv->status & (STATUS_ASSOCIATED |
STATUS_ASSOCIATING |
STATUS_ROAMING |
}
}
-static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
+static int ipw_request_scan_helper(struct ipw_priv *priv, int type, int direct)
{
struct ipw_scan_request_ext scan;
int err = 0, scan_type;
mutex_lock(&priv->mutex);
+ if (direct && (priv->direct_scan_ssid_len == 0)) {
+ IPW_DEBUG_HC("Direct scan requested but no SSID to scan for\n");
+ priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+ goto done;
+ }
+
if (priv->status & STATUS_SCANNING) {
- IPW_DEBUG_HC("Concurrent scan requested. Ignoring.\n");
- priv->status |= STATUS_SCAN_PENDING;
+ IPW_DEBUG_HC("Concurrent scan requested. Queuing.\n");
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
if (!(priv->status & STATUS_SCAN_FORCED) &&
priv->status & STATUS_SCAN_ABORTING) {
IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n");
- priv->status |= STATUS_SCAN_PENDING;
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
if (priv->status & STATUS_RF_KILL_MASK) {
- IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n");
- priv->status |= STATUS_SCAN_PENDING;
+ IPW_DEBUG_HC("Queuing scan due to RF Kill activation\n");
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
cpu_to_le16(20);
scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
+ scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
#ifdef CONFIG_IPW2200_MONITOR
if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
cpu_to_le16(2000);
} else {
#endif /* CONFIG_IPW2200_MONITOR */
- /* If we are roaming, then make this a directed scan for the
- * current network. Otherwise, ensure that every other scan
- * is a fast channel hop scan */
- if ((priv->status & STATUS_ROAMING)
- || (!(priv->status & STATUS_ASSOCIATED)
- && (priv->config & CFG_STATIC_ESSID)
- && (le32_to_cpu(scan.full_scan_index) % 2))) {
+ /* Honor direct scans first, otherwise if we are roaming make
+ * this a direct scan for the current network. Finally,
+ * ensure that every other scan is a fast channel hop scan */
+ if (direct) {
+ err = ipw_send_ssid(priv, priv->direct_scan_ssid,
+ priv->direct_scan_ssid_len);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send SSID command "
+ "failed\n");
+ goto done;
+ }
+
+ scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
+ } else if ((priv->status & STATUS_ROAMING)
+ || (!(priv->status & STATUS_ASSOCIATED)
+ && (priv->config & CFG_STATIC_ESSID)
+ && (le32_to_cpu(scan.full_scan_index) % 2))) {
err = ipw_send_ssid(priv, priv->essid, priv->essid_len);
if (err) {
IPW_DEBUG_HC("Attempt to send SSID command "
}
priv->status |= STATUS_SCANNING;
- priv->status &= ~STATUS_SCAN_PENDING;
+ if (direct) {
+ priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+ priv->direct_scan_ssid_len = 0;
+ } else
+ priv->status &= ~STATUS_SCAN_PENDING;
+
queue_delayed_work(priv->workqueue, &priv->scan_check,
IPW_SCAN_CHECK_WATCHDOG);
done:
static void ipw_request_passive_scan(struct work_struct *work)
{
struct ipw_priv *priv =
- container_of(work, struct ipw_priv, request_passive_scan);
- ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE);
+ container_of(work, struct ipw_priv, request_passive_scan.work);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE, 0);
}
static void ipw_request_scan(struct work_struct *work)
{
struct ipw_priv *priv =
container_of(work, struct ipw_priv, request_scan.work);
- ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 0);
+}
+
+static void ipw_request_direct_scan(struct work_struct *work)
+{
+ struct ipw_priv *priv =
+ container_of(work, struct ipw_priv, request_direct_scan.work);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 1);
}
static void ipw_bg_abort_scan(struct work_struct *work)
return 0;
}
-static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid,
- int essid_len)
-{
- struct ipw_scan_request_ext scan;
- int err = 0, scan_type;
-
- if (!(priv->status & STATUS_INIT) ||
- (priv->status & STATUS_EXIT_PENDING))
- return 0;
-
- mutex_lock(&priv->mutex);
-
- if (priv->status & STATUS_RF_KILL_MASK) {
- IPW_DEBUG_HC("Aborting scan due to RF kill activation\n");
- priv->status |= STATUS_SCAN_PENDING;
- goto done;
- }
-
- IPW_DEBUG_HC("starting request direct scan!\n");
-
- if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) {
- /* We should not sleep here; otherwise we will block most
- * of the system (for instance, we hold rtnl_lock when we
- * get here).
- */
- err = -EAGAIN;
- goto done;
- }
- memset(&scan, 0, sizeof(scan));
-
- if (priv->config & CFG_SPEED_SCAN)
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
- cpu_to_le16(30);
- else
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
- cpu_to_le16(20);
-
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] =
- cpu_to_le16(20);
- scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
- scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
-
- scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee));
-
- err = ipw_send_ssid(priv, essid, essid_len);
- if (err) {
- IPW_DEBUG_HC("Attempt to send SSID command failed\n");
- goto done;
- }
- scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
-
- ipw_add_scan_channels(priv, &scan, scan_type);
-
- err = ipw_send_scan_request_ext(priv, &scan);
- if (err) {
- IPW_DEBUG_HC("Sending scan command failed: %08X\n", err);
- goto done;
- }
-
- priv->status |= STATUS_SCANNING;
-
- done:
- mutex_unlock(&priv->mutex);
- return err;
-}
-
static int ipw_wx_set_scan(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
struct iw_scan_req *req = (struct iw_scan_req *)extra;
+ struct delayed_work *work = NULL;
mutex_lock(&priv->mutex);
+
priv->user_requested_scan = 1;
- mutex_unlock(&priv->mutex);
if (wrqu->data.length == sizeof(struct iw_scan_req)) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
- ipw_request_direct_scan(priv, req->essid,
- req->essid_len);
- return 0;
- }
- if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
- queue_work(priv->workqueue,
- &priv->request_passive_scan);
- return 0;
+ int len = min((int)req->essid_len,
+ (int)sizeof(priv->direct_scan_ssid));
+ memcpy(priv->direct_scan_ssid, req->essid, len);
+ priv->direct_scan_ssid_len = len;
+ work = &priv->request_direct_scan;
+ } else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
+ work = &priv->request_passive_scan;
}
+ } else {
+ /* Normal active broadcast scan */
+ work = &priv->request_scan;
}
+ mutex_unlock(&priv->mutex);
+
IPW_DEBUG_WX("Start scan\n");
- queue_delayed_work(priv->workqueue, &priv->request_scan, 0);
+ queue_delayed_work(priv->workqueue, work, 0);
return 0;
}
}
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
ipw_reset_stats(priv);
/* Ensure the rate is updated immediately */
/* Cancel any queued work ... */
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->adhoc_check);
cancel_delayed_work(&priv->gather_stats);
INIT_WORK(&priv->up, ipw_bg_up);
INIT_WORK(&priv->down, ipw_bg_down);
INIT_DELAYED_WORK(&priv->request_scan, ipw_request_scan);
+ INIT_DELAYED_WORK(&priv->request_direct_scan, ipw_request_direct_scan);
+ INIT_DELAYED_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
INIT_DELAYED_WORK(&priv->scan_event, ipw_scan_event);
- INIT_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
INIT_DELAYED_WORK(&priv->gather_stats, ipw_bg_gather_stats);
INIT_WORK(&priv->abort_scan, ipw_bg_abort_scan);
INIT_WORK(&priv->roam, ipw_bg_roam);
cancel_delayed_work(&priv->adhoc_check);
cancel_delayed_work(&priv->gather_stats);
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
cancel_delayed_work(&priv->rf_kill);
cancel_delayed_work(&priv->scan_check);
#define STATUS_DISASSOC_PENDING (1<<12)
#define STATUS_STATE_PENDING (1<<13)
+#define STATUS_DIRECT_SCAN_PENDING (1<<19)
#define STATUS_SCAN_PENDING (1<<20)
#define STATUS_SCANNING (1<<21)
#define STATUS_SCAN_ABORTING (1<<22)
struct iw_public_data wireless_data;
int user_requested_scan;
+ u8 direct_scan_ssid[IW_ESSID_MAX_SIZE];
+ u8 direct_scan_ssid_len;
struct workqueue_struct *workqueue;
struct work_struct system_config;
struct work_struct rx_replenish;
struct delayed_work request_scan;
+ struct delayed_work request_direct_scan;
+ struct delayed_work request_passive_scan;
struct delayed_work scan_event;
- struct work_struct request_passive_scan;
struct work_struct adapter_restart;
struct delayed_work rf_kill;
struct work_struct up;
led->led_dev.brightness_set = iwl3945_led_brightness_set;
led->led_dev.default_trigger = trigger;
+ led->priv = priv;
+ led->type = type;
+
ret = led_classdev_register(device, &led->led_dev);
if (ret) {
IWL_ERROR("Error: failed to register led handler.\n");
return ret;
}
- led->priv = priv;
- led->type = type;
led->registered = 1;
if (set_led && led->led_on)
spin_lock_irqsave(&priv->driver_lock, flags);
+ /* We don't get a response on the sleep-confirmation */
+ priv->dnld_sent = DNLD_RES_RECEIVED;
+
/* If nothing to do, go back to sleep (?) */
if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx])
priv->psstate = PS_STATE_SLEEP;
lbs_deb_enter(LBS_DEB_HOST);
+ spin_lock_irqsave(&priv->driver_lock, flags);
if (priv->dnld_sent) {
allowed = 0;
lbs_deb_host("dnld_sent was set\n");
}
- spin_lock_irqsave(&priv->driver_lock, flags);
/* In-progress command? */
if (priv->cur_cmd) {
allowed = 0;
lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
priv->currenttxskb, priv->dnld_sent);
- spin_lock_irq(&priv->driver_lock);
/* Process any pending command response */
+ spin_lock_irq(&priv->driver_lock);
resp_idx = priv->resp_idx;
if (priv->resp_len[resp_idx]) {
spin_unlock_irq(&priv->driver_lock);
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
+ depends on INPUT
select RFKILL
select INPUT_POLLDEV
config RT2X00_LIB_LEDS
boolean
- depends on RT2X00_LIB
+ depends on RT2X00_LIB && NEW_LEDS
config RT2400PCI
tristate "Ralink rt2400 pci/pcmcia support"
config RT2400PCI_RFKILL
bool "RT2400 rfkill support"
- depends on RT2400PCI
+ depends on RT2400PCI && INPUT
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2400 devices that feature a
config RT2400PCI_LEDS
bool "RT2400 leds support"
- depends on RT2400PCI
+ depends on RT2400PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
config RT2500PCI_RFKILL
bool "RT2500 rfkill support"
- depends on RT2500PCI
+ depends on RT2500PCI && INPUT
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2500 devices that feature a
config RT2500PCI_LEDS
bool "RT2500 leds support"
- depends on RT2500PCI
+ depends on RT2500PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
config RT61PCI_RFKILL
bool "RT61 rfkill support"
- depends on RT61PCI
+ depends on RT61PCI && INPUT
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt61 devices that feature a
config RT61PCI_LEDS
bool "RT61 leds support"
- depends on RT61PCI
+ depends on RT61PCI && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
config RT2500USB_LEDS
bool "RT2500 leds support"
- depends on RT2500USB
+ depends on RT2500USB && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
config RT73USB_LEDS
bool "RT73 leds support"
- depends on RT73USB
+ depends on RT73USB && NEW_LEDS
select LEDS_CLASS
select RT2X00_LIB_LEDS
---help---
if (pci_set_mwi(pci_dev))
ERROR_PROBE("MWI not available.\n");
- if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) &&
- pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
ERROR_PROBE("PCI DMA not supported.\n");
retval = -EIO;
goto exit_disable_device;
}
}
+ /*
+ * Kill guardian urb (if required by driver).
+ */
+ if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags))
+ return;
+
for (i = 0; i < rt2x00dev->bcn->limit; i++) {
priv_bcn = rt2x00dev->bcn->entries[i].priv_data;
usb_kill_urb(priv_bcn->urb);
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
fc = le16_to_cpu(*((__le16 *) buffer));
is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
- ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_QOS_DATA);
+ (fc & IEEE80211_STYPE_QOS_DATA);
is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
need_padding = is_qos ^ is_4addr;
any need to change it. */
struct mempolicy *oldpol;
cpumask_t oldmask = current->cpus_allowed;
- int node = pcibus_to_node(dev->bus);
+ int node = dev_to_node(&dev->dev);
if (node >= 0) {
node_to_cpumask_ptr(nodecpumask, node);
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
+ * @write_combine: 1 for write_combine mapping
*
* Use the regular PCI mapping routines to map a PCI resource into userspace.
- * FIXME: write combining? maybe automatic for prefetchable regions?
*/
static int
pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma, int write_combine)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
- return pci_mmap_page_range(pdev, vma, mmap_type, 0);
+ return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+}
+
+static int
+pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+static int
+pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 1);
}
/**
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
+
+ res_attr = pdev->res_attr_wc[i];
+ if (res_attr) {
+ sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+ kfree(res_attr);
+ }
}
}
+static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
+{
+ /* allocate attribute structure, piggyback attribute name */
+ int name_len = write_combine ? 13 : 10;
+ struct bin_attribute *res_attr;
+ int retval;
+
+ res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
+ if (res_attr) {
+ char *res_attr_name = (char *)(res_attr + 1);
+
+ if (write_combine) {
+ pdev->res_attr_wc[num] = res_attr;
+ sprintf(res_attr_name, "resource%d_wc", num);
+ res_attr->mmap = pci_mmap_resource_wc;
+ } else {
+ pdev->res_attr[num] = res_attr;
+ sprintf(res_attr_name, "resource%d", num);
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
+ res_attr->attr.name = res_attr_name;
+ res_attr->attr.mode = S_IRUSR | S_IWUSR;
+ res_attr->size = pci_resource_len(pdev, num);
+ res_attr->private = &pdev->resource[num];
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ } else
+ retval = -ENOMEM;
+
+ return retval;
+}
+
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- struct bin_attribute *res_attr;
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
- /* allocate attribute structure, piggyback attribute name */
- res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
- if (res_attr) {
- char *res_attr_name = (char *)(res_attr + 1);
-
- pdev->res_attr[i] = res_attr;
- sprintf(res_attr_name, "resource%d", i);
- res_attr->attr.name = res_attr_name;
- res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->size = pci_resource_len(pdev, i);
- res_attr->mmap = pci_mmap_resource;
- res_attr->private = &pdev->resource[i];
- retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
- if (retval) {
- pci_remove_resource_files(pdev);
- return retval;
- }
- } else {
- return -ENOMEM;
+ retval = pci_create_attr(pdev, i, 0);
+ /* for prefetchable resources, create a WC mappable file */
+ if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+ retval = pci_create_attr(pdev, i, 1);
+
+ if (retval) {
+ pci_remove_resource_files(pdev);
+ return retval;
}
}
return 0;
flags = IORESOURCE_IRQ_HIGHEDGE;
}
- if (shareable)
+ if (shareable == ACPI_SHARED)
flags |= IORESOURCE_IRQ_SHAREABLE;
return flags;
}
-static void decode_irq_flags(int flag, int *triggering, int *polarity)
+static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
+ int *polarity, int *shareable)
{
- switch (flag) {
+ switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL |
+ IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) {
case IORESOURCE_IRQ_LOWLEVEL:
*triggering = ACPI_LEVEL_SENSITIVE;
*polarity = ACPI_ACTIVE_LOW;
*triggering = ACPI_EDGE_SENSITIVE;
*polarity = ACPI_ACTIVE_HIGH;
break;
+ default:
+ dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n",
+ flags);
+ *triggering = ACPI_EDGE_SENSITIVE;
+ *polarity = ACPI_ACTIVE_HIGH;
+ break;
}
+
+ if (flags & IORESOURCE_IRQ_SHAREABLE)
+ *shareable = ACPI_SHARED;
+ else
+ *shareable = ACPI_EXCLUSIVE;
}
static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
if (pnpacpi_supported_resource(res)) {
(*resource)->type = res->type;
(*resource)->length = sizeof(struct acpi_resource);
+ if (res->type == ACPI_RESOURCE_TYPE_IRQ)
+ (*resource)->data.irq.descriptor_length =
+ res->data.irq.descriptor_length;
(*resource)++;
}
struct resource *p)
{
struct acpi_resource_irq *irq = &resource->data.irq;
- int triggering, polarity;
+ int triggering, polarity, shareable;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
+ decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable);
irq->triggering = triggering;
irq->polarity = polarity;
- if (triggering == ACPI_EDGE_SENSITIVE)
- irq->sharable = ACPI_EXCLUSIVE;
- else
- irq->sharable = ACPI_SHARED;
+ irq->sharable = shareable;
irq->interrupt_count = 1;
irq->interrupts[0] = p->start;
- dev_dbg(&dev->dev, " encode irq %d %s %s %s\n", (int) p->start,
+ dev_dbg(&dev->dev, " encode irq %d %s %s %s (%d-byte descriptor)\n",
+ (int) p->start,
triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge",
polarity == ACPI_ACTIVE_LOW ? "low" : "high",
- irq->sharable == ACPI_SHARED ? "shared" : "exclusive");
+ irq->sharable == ACPI_SHARED ? "shared" : "exclusive",
+ irq->descriptor_length);
}
static void pnpacpi_encode_ext_irq(struct pnp_dev *dev,
struct resource *p)
{
struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq;
- int triggering, polarity;
+ int triggering, polarity, shareable;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
+ decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable);
extended_irq->producer_consumer = ACPI_CONSUMER;
extended_irq->triggering = triggering;
extended_irq->polarity = polarity;
- if (triggering == ACPI_EDGE_SENSITIVE)
- extended_irq->sharable = ACPI_EXCLUSIVE;
- else
- extended_irq->sharable = ACPI_SHARED;
+ extended_irq->sharable = shareable;
extended_irq->interrupt_count = 1;
extended_irq->interrupts[0] = p->start;
dev_dbg(dev, "uevent\n");
- if (!psy) {
+ if (!psy || !psy->dev) {
dev_dbg(dev, "No power supply yet\n");
return ret;
}
This driver can also be built as a module. If so the module
will be called rtc-s35390a.
+config RTC_DRV_FM3130
+ tristate "Ramtron FM3130"
+ help
+ If you say Y here you will get support for the
+ Ramtron FM3130 RTC chips.
+ Ramtron FM3130 is a chip with two separate devices inside,
+ RTC clock and FRAM. This driver provides only RTC functionality.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-fm3130.
+
endif # I2C
comment "SPI RTC drivers"
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
+obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
-obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
{
struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+ spin_lock_irq(&rtc->lock);
rtc_time_to_tm(rtc->alarm_time, &alrm->time);
- alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+ alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+ alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0;
+ spin_unlock_irq(&rtc->lock);
return 0;
}
spin_lock_irq(&rtc->lock);
rtc->alarm_time = alarm_unix_time;
rtc_writel(rtc, TOP, rtc->alarm_time);
- if (alrm->pending)
+ if (alrm->enabled)
rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
| RTC_BIT(CTRL_TOPEN));
else
.resume = cmos_pnp_resume,
};
-static int __init cmos_init(void)
-{
- return pnp_register_driver(&cmos_pnp_driver);
-}
-module_init(cmos_init);
-
-static void __exit cmos_exit(void)
-{
- pnp_unregister_driver(&cmos_pnp_driver);
-}
-module_exit(cmos_exit);
-
-#else /* no PNP */
+#endif /* CONFIG_PNP */
/*----------------------------------------------------------------*/
static int __init cmos_init(void)
{
+#ifdef CONFIG_PNP
+ if (pnp_platform_devices)
+ return pnp_register_driver(&cmos_pnp_driver);
+ else
+ return platform_driver_probe(&cmos_platform_driver,
+ cmos_platform_probe);
+#else
return platform_driver_probe(&cmos_platform_driver,
cmos_platform_probe);
+#endif /* CONFIG_PNP */
}
module_init(cmos_init);
static void __exit cmos_exit(void)
{
+#ifdef CONFIG_PNP
+ if (pnp_platform_devices)
+ pnp_unregister_driver(&cmos_pnp_driver);
+ else
+ platform_driver_unregister(&cmos_platform_driver);
+#else
platform_driver_unregister(&cmos_platform_driver);
+#endif /* CONFIG_PNP */
}
module_exit(cmos_exit);
-#endif /* !PNP */
-
MODULE_AUTHOR("David Brownell");
MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
+ *
+ * Copyright (C) 2008 Sergey Lapin
+ * Based on ds1307 driver by James Chapman and David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#define FM3130_RTC_CONTROL (0x0)
+#define FM3130_CAL_CONTROL (0x1)
+#define FM3130_RTC_SECONDS (0x2)
+#define FM3130_RTC_MINUTES (0x3)
+#define FM3130_RTC_HOURS (0x4)
+#define FM3130_RTC_DAY (0x5)
+#define FM3130_RTC_DATE (0x6)
+#define FM3130_RTC_MONTHS (0x7)
+#define FM3130_RTC_YEARS (0x8)
+
+#define FM3130_ALARM_SECONDS (0x9)
+#define FM3130_ALARM_MINUTES (0xa)
+#define FM3130_ALARM_HOURS (0xb)
+#define FM3130_ALARM_DATE (0xc)
+#define FM3130_ALARM_MONTHS (0xd)
+#define FM3130_ALARM_WP_CONTROL (0xe)
+
+#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
+#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
+#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
+#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
+#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
+#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
+#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
+#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
+#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
+
+#define FM3130_CLOCK_REGS 7
+#define FM3130_ALARM_REGS 5
+
+struct fm3130 {
+ u8 reg_addr_time;
+ u8 reg_addr_alarm;
+ u8 regs[15];
+ struct i2c_msg msg[4];
+ struct i2c_client *client;
+ struct rtc_device *rtc;
+ int data_valid;
+ int alarm;
+};
+static const struct i2c_device_id fm3130_id[] = {
+ { "fm3130-rtc", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, fm3130_id);
+
+#define FM3130_MODE_NORMAL 0
+#define FM3130_MODE_WRITE 1
+#define FM3130_MODE_READ 2
+
+static void fm3130_rtc_mode(struct device *dev, int mode)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+ switch (mode) {
+ case FM3130_MODE_NORMAL:
+ fm3130->regs[FM3130_RTC_CONTROL] &=
+ ~(FM3130_RTC_CONTROL_BIT_WRITE |
+ FM3130_RTC_CONTROL_BIT_READ);
+ break;
+ case FM3130_MODE_WRITE:
+ fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
+ break;
+ case FM3130_MODE_READ:
+ fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
+ break;
+ default:
+ dev_dbg(dev, "invalid mode %d\n", mode);
+ break;
+ }
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
+}
+
+static int fm3130_get_time(struct device *dev, struct rtc_time *t)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp;
+
+ if (!fm3130->data_valid) {
+ /* We have invalid data in RTC, probably due
+ to battery faults or other problems. Return EIO
+ for now, it will allow us to set data later insted
+ of error during probing which disables device */
+ return -EIO;
+ }
+ fm3130_rtc_mode(dev, FM3130_MODE_READ);
+
+ /* read the RTC date and time registers all at once */
+ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+ fm3130->msg, 2);
+ if (tmp != 2) {
+ dev_err(dev, "%s error %d\n", "read", tmp);
+ return -EIO;
+ }
+
+ fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ "read",
+ fm3130->regs[0], fm3130->regs[1],
+ fm3130->regs[2], fm3130->regs[3],
+ fm3130->regs[4], fm3130->regs[5],
+ fm3130->regs[6], fm3130->regs[7],
+ fm3130->regs[8], fm3130->regs[9],
+ fm3130->regs[0xa], fm3130->regs[0xb],
+ fm3130->regs[0xc], fm3130->regs[0xd],
+ fm3130->regs[0xe]);
+
+ t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
+ t->tm_hour = BCD2BIN(tmp);
+ t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
+ t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
+ t->tm_mon = BCD2BIN(tmp) - 1;
+
+ /* assume 20YY not 19YY, and ignore CF bit */
+ t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read", t->tm_sec, t->tm_min,
+ t->tm_hour, t->tm_mday,
+ t->tm_mon, t->tm_year, t->tm_wday);
+
+ /* initial clock setting can be undefined */
+ return rtc_valid_tm(t);
+}
+
+
+static int fm3130_set_time(struct device *dev, struct rtc_time *t)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp, i;
+ u8 *buf = fm3130->regs;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write", t->tm_sec, t->tm_min,
+ t->tm_hour, t->tm_mday,
+ t->tm_mon, t->tm_year, t->tm_wday);
+
+ /* first register addr */
+ buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec);
+ buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min);
+ buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour);
+ buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1);
+ buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday);
+ buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1);
+
+ /* assume 20YY not 19YY */
+ tmp = t->tm_year - 100;
+ buf[FM3130_RTC_YEARS] = BIN2BCD(tmp);
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ "write", buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7],
+ buf[8], buf[9], buf[0xa], buf[0xb],
+ buf[0xc], buf[0xd], buf[0xe]);
+
+ fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
+
+ /* Writing time registers, we don't support multibyte transfers */
+ for (i = 0; i < FM3130_CLOCK_REGS; i++) {
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_SECONDS + i,
+ fm3130->regs[FM3130_RTC_SECONDS + i]);
+ }
+
+ fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+ /* We assume here that data are valid once written */
+ if (!fm3130->data_valid)
+ fm3130->data_valid = 1;
+ return 0;
+}
+
+static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp;
+ struct rtc_time *tm = &alrm->time;
+ /* read the RTC alarm registers all at once */
+ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+ &fm3130->msg[2], 2);
+ if (tmp != 2) {
+ dev_err(dev, "%s error %d\n", "read", tmp);
+ return -EIO;
+ }
+ dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
+ fm3130->regs[FM3130_ALARM_SECONDS],
+ fm3130->regs[FM3130_ALARM_MINUTES],
+ fm3130->regs[FM3130_ALARM_HOURS],
+ fm3130->regs[FM3130_ALARM_DATE],
+ fm3130->regs[FM3130_ALARM_MONTHS]);
+
+
+ tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
+ tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
+ tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
+ tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
+ tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+ if (tm->tm_mon > 0)
+ tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read alarm", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alrm->time;
+ int i;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write alarm", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ if (tm->tm_sec != -1)
+ fm3130->regs[FM3130_ALARM_SECONDS] =
+ BIN2BCD(tm->tm_sec) | 0x80;
+
+ if (tm->tm_min != -1)
+ fm3130->regs[FM3130_ALARM_MINUTES] =
+ BIN2BCD(tm->tm_min) | 0x80;
+
+ if (tm->tm_hour != -1)
+ fm3130->regs[FM3130_ALARM_HOURS] =
+ BIN2BCD(tm->tm_hour) | 0x80;
+
+ if (tm->tm_mday != -1)
+ fm3130->regs[FM3130_ALARM_DATE] =
+ BIN2BCD(tm->tm_mday) | 0x80;
+
+ if (tm->tm_mon != -1)
+ fm3130->regs[FM3130_ALARM_MONTHS] =
+ BIN2BCD(tm->tm_mon + 1) | 0x80;
+
+ dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
+ fm3130->regs[FM3130_ALARM_SECONDS],
+ fm3130->regs[FM3130_ALARM_MINUTES],
+ fm3130->regs[FM3130_ALARM_HOURS],
+ fm3130->regs[FM3130_ALARM_DATE],
+ fm3130->regs[FM3130_ALARM_MONTHS]);
+ /* Writing time registers, we don't support multibyte transfers */
+ for (i = 0; i < FM3130_ALARM_REGS; i++) {
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_ALARM_SECONDS + i,
+ fm3130->regs[FM3130_ALARM_SECONDS + i]);
+ }
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+ if (alrm->enabled) {
+ i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+ (fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+ FM3130_RTC_CONTROL_BIT_AEN);
+ } else {
+ i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
+ }
+ return 0;
+}
+
+static const struct rtc_class_ops fm3130_rtc_ops = {
+ .read_time = fm3130_get_time,
+ .set_time = fm3130_set_time,
+ .read_alarm = fm3130_read_alarm,
+ .set_alarm = fm3130_set_alarm,
+};
+
+static struct i2c_driver fm3130_driver;
+
+static int __devinit fm3130_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct fm3130 *fm3130;
+ int err = -ENODEV;
+ int tmp;
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+
+ if (!i2c_check_functionality(adapter,
+ I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL);
+
+ if (!fm3130)
+ return -ENOMEM;
+
+ fm3130->client = client;
+ i2c_set_clientdata(client, fm3130);
+ fm3130->reg_addr_time = FM3130_RTC_SECONDS;
+ fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
+
+ /* Messages to read time */
+ fm3130->msg[0].addr = client->addr;
+ fm3130->msg[0].flags = 0;
+ fm3130->msg[0].len = 1;
+ fm3130->msg[0].buf = &fm3130->reg_addr_time;
+
+ fm3130->msg[1].addr = client->addr;
+ fm3130->msg[1].flags = I2C_M_RD;
+ fm3130->msg[1].len = FM3130_CLOCK_REGS;
+ fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
+
+ /* Messages to read alarm */
+ fm3130->msg[2].addr = client->addr;
+ fm3130->msg[2].flags = 0;
+ fm3130->msg[2].len = 1;
+ fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
+
+ fm3130->msg[3].addr = client->addr;
+ fm3130->msg[3].flags = I2C_M_RD;
+ fm3130->msg[3].len = FM3130_ALARM_REGS;
+ fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+
+ fm3130->data_valid = 0;
+
+ tmp = i2c_transfer(adapter, fm3130->msg, 4);
+ if (tmp != 4) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
+ fm3130->regs[FM3130_CAL_CONTROL] =
+ i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
+
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+
+ /* Disabling calibration mode */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL));
+ dev_warn(&client->dev, "Disabling calibration mode!\n");
+
+ /* Disabling read and write modes */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
+ fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_READ |
+ FM3130_RTC_CONTROL_BIT_WRITE));
+ dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+
+ /* oscillator off? turn it on, so clock can tick. */
+ if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
+ i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
+ fm3130->regs[FM3130_CAL_CONTROL] &
+ ~(FM3130_CAL_CONTROL_BIT_nOSCEN));
+
+ /* oscillator fault? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+ dev_warn(&client->dev, "Low battery!\n");
+
+ /* oscillator fault? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~FM3130_RTC_CONTROL_BIT_POR);
+ dev_warn(&client->dev, "SET TIME!\n");
+ }
+ /* ACS is controlled by alarm */
+ i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
+
+ /* TODO */
+ /* TODO need to sanity check alarm */
+ tmp = fm3130->regs[FM3130_RTC_SECONDS];
+ tmp = BCD2BIN(tmp & 0x7f);
+ if (tmp > 60)
+ goto exit_bad;
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ if (tmp > 60)
+ goto exit_bad;
+
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ if (tmp == 0 || tmp > 31)
+ goto exit_bad;
+
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+ if (tmp == 0 || tmp > 12)
+ goto exit_bad;
+
+ tmp = fm3130->regs[FM3130_RTC_HOURS];
+
+ fm3130->data_valid = 1;
+
+exit_bad:
+ if (!fm3130->data_valid)
+ dev_dbg(&client->dev,
+ "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ "bogus registers",
+ fm3130->regs[0], fm3130->regs[1],
+ fm3130->regs[2], fm3130->regs[3],
+ fm3130->regs[4], fm3130->regs[5],
+ fm3130->regs[6], fm3130->regs[7],
+ fm3130->regs[8], fm3130->regs[9],
+ fm3130->regs[0xa], fm3130->regs[0xb],
+ fm3130->regs[0xc], fm3130->regs[0xd],
+ fm3130->regs[0xe]);
+
+ /* We won't bail out here because we just got invalid data.
+ Time setting from u-boot doesn't work anyway */
+ fm3130->rtc = rtc_device_register(client->name, &client->dev,
+ &fm3130_rtc_ops, THIS_MODULE);
+ if (IS_ERR(fm3130->rtc)) {
+ err = PTR_ERR(fm3130->rtc);
+ dev_err(&client->dev,
+ "unable to register the class device\n");
+ goto exit_free;
+ }
+ return 0;
+exit_free:
+ kfree(fm3130);
+ return err;
+}
+
+static int __devexit fm3130_remove(struct i2c_client *client)
+{
+ struct fm3130 *fm3130 = i2c_get_clientdata(client);
+
+ rtc_device_unregister(fm3130->rtc);
+ kfree(fm3130);
+ return 0;
+}
+
+static struct i2c_driver fm3130_driver = {
+ .driver = {
+ .name = "rtc-fm3130",
+ .owner = THIS_MODULE,
+ },
+ .probe = fm3130_probe,
+ .remove = __devexit_p(fm3130_remove),
+ .id_table = fm3130_id,
+};
+
+static int __init fm3130_init(void)
+{
+ return i2c_add_driver(&fm3130_driver);
+}
+module_init(fm3130_init);
+
+static void __exit fm3130_exit(void)
+{
+ i2c_del_driver(&fm3130_driver);
+}
+module_exit(fm3130_exit);
+
+MODULE_DESCRIPTION("RTC driver for FM3130");
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_LICENSE("GPL");
+
{
int rc;
+ INIT_LIST_HEAD(&sclp_vt220_register.list);
if (!CONSOLE_IS_SCLP)
return 0;
rc = __sclp_vt220_init();
rc = tape_3590_read_dev_chars(device, rdc_data);
if (rc) {
DBF_LH(3, "Read device characteristics failed!\n");
- goto fail_kmalloc;
+ goto fail_rdc_data;
}
rc = tape_std_assign(device);
if (rc)
return 0;
}
-static int parse_busid(char *str, int *cssid, int *ssid, int *devno,
- int msgtrigger)
+static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid,
+ unsigned int *devno, int msgtrigger)
{
char *str_work;
int val, rc, ret;
static int blacklist_parse_parameters(char *str, range_action action,
int msgtrigger)
{
- int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
+ unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
int rc, totalrc;
char *parm;
range_action ra;
err = -ENODEV;
goto out;
}
- if (cio_is_console(sch->schid))
+ if (cio_is_console(sch->schid)) {
sch->opm = 0xff;
- else
+ sch->isc = 1;
+ } else {
sch->opm = chp_get_sch_opm(sch);
+ sch->isc = 3;
+ }
sch->lpm = sch->schib.pmcw.pam & sch->opm;
- sch->isc = 3;
CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
"- PIM = %02X, PAM = %02X, POM = %02X\n",
if (!console_subchannel_in_use)
return;
- /* disable all but isc 7 (console device) */
+ /* disable all but isc 1 (console device) */
__ctl_store (save_cr6, 6, 6);
- cr6 = 0x01000000;
+ cr6 = 0x40000000;
__ctl_load (cr6, 6, 6);
do {
}
/*
- * enable console I/O-interrupt subclass 7
+ * enable console I/O-interrupt subclass 1
*/
- ctl_set_bit(6, 24);
- console_subchannel.isc = 7;
- console_subchannel.schib.pmcw.isc = 7;
+ ctl_set_bit(6, 30);
+ console_subchannel.isc = 1;
+ console_subchannel.schib.pmcw.isc = 1;
console_subchannel.schib.pmcw.intparm =
(u32)(addr_t)&console_subchannel;
ret = cio_modify(&console_subchannel);
card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
NETIF_F_HW_CSUM;
} else {
- PRINT_WARN("TSO not supported on %s. "
- "large_send set to 'no'.\n",
- card->dev->name);
card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
NETIF_F_HW_CSUM);
card->options.large_send = QETH_LARGE_SEND_NO;
}
}
-static inline __u16 qeth_raw_devno_from_bus_id(char *id)
-{
- id += (strlen(id) - 4);
- return (__u16) simple_strtoul(id, &id, 16);
-}
-
static int qeth_idx_activate_get_answer(struct qeth_channel *channel,
void (*idx_reply_cb)(struct qeth_channel *,
struct qeth_cmd_buffer *))
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
if (rc) {
- PRINT_ERR("Error2 in activating channel rc=%d\n", rc);
+ QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc);
QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
atomic_set(&channel->irq_pending, 0);
wake_up(&card->wait_q);
__u16 temp;
__u8 tmp;
int rc;
+ struct ccw_dev_id temp_devid;
card = CARD_FROM_CDEV(channel->ccwdev);
&card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH);
memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data),
&card->info.func_level, sizeof(__u16));
- temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card));
- memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2);
+ ccw_device_get_id(CARD_DDEV(card), &temp_devid);
+ memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp_devid.devno, 2);
temp = (card->info.cula << 8) + card->info.unit_addr2;
memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2);
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
if (rc) {
- PRINT_ERR("Error1 in activating channel. rc=%d\n", rc);
+ QETH_DBF_MESSAGE(2, "Error1 in activating channel. rc=%d\n",
+ rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
atomic_set(&channel->irq_pending, 0);
wake_up(&card->wait_q);
reply = qeth_alloc_reply(card);
if (!reply) {
- PRINT_WARN("Could not alloc qeth_reply!\n");
return -ENOMEM;
}
reply->callback = reply_cb;
if (newcount < count) {
/* we are in memory shortage so we switch back to
traditional skb allocation and drop packages */
- if (!atomic_read(&card->force_alloc_skb) &&
- net_ratelimit())
- PRINT_WARN("Switch to alloc skb\n");
atomic_set(&card->force_alloc_skb, 3);
count = newcount;
} else {
- if ((atomic_read(&card->force_alloc_skb) == 1) &&
- net_ratelimit())
- PRINT_WARN("Switch to sg\n");
atomic_add_unless(&card->force_alloc_skb, -1, 0);
}
elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
+ skb->len) >> PAGE_SHIFT);
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
- PRINT_ERR("Invalid size of IP packet "
+ QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
(elements_needed+elems), skb->len);
return 0;
* free buffers) to handle eddp context */
if (qeth_eddp_check_buffers_for_context(queue, ctx)
< 0) {
- if (net_ratelimit())
- PRINT_WARN("eddp tx_dropped 1\n");
rc = -EBUSY;
goto out;
}
tmp = qeth_eddp_fill_buffer(queue, ctx,
queue->next_buf_to_fill);
if (tmp < 0) {
- PRINT_ERR("eddp tx_dropped 2\n");
rc = -EBUSY;
goto out;
}
if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) &&
(!card->options.layer2)) {
- PRINT_WARN("SNMP Query MIBS not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
/* skip 4 bytes (data_len struct member) to get req_len */
rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len,
qeth_snmp_command_cb, (void *)&qinfo);
if (rc)
- PRINT_WARN("SNMP command failed on %s: (0x%x)\n",
+ QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n",
QETH_CARD_IFNAME(card), rc);
else {
if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
if (mpno)
mpno = min(mpno - 1, QETH_MAX_PORTNO);
if (card->info.portno > mpno) {
- PRINT_ERR("Device %s does not offer port number %d \n.",
- CARD_BUS_ID(card), card->info.portno);
+ QETH_DBF_MESSAGE(2, "Device %s does not offer port number %d"
+ "\n.", CARD_BUS_ID(card), card->info.portno);
rc = -ENODEV;
goto out;
}
return skb;
no_mem:
if (net_ratelimit()) {
- PRINT_WARN("No memory for packet received on %s.\n",
- QETH_CARD_IFNAME(card));
QETH_DBF_TEXT(TRACE, 2, "noskbmem");
QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card));
}
}
}
-void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...)
+void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *fmt, ...)
{
char dbf_txt_buf[32];
+ va_list args;
if (level > (qeth_dbf[dbf_nix].id)->level)
return;
- snprintf(dbf_txt_buf, sizeof(dbf_txt_buf), text);
+ va_start(args, fmt);
+ vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
+ va_end(args);
debug_text_event(qeth_dbf[dbf_nix].id, level, dbf_txt_buf);
-
}
EXPORT_SYMBOL_GPL(qeth_dbf_longtext);
if (element == 0)
return -EBUSY;
else {
- PRINT_WARN("could only partially fill eddp "
- "buffer!\n");
+ QETH_DBF_MESSAGE(2, "could only partially fill"
+ "eddp buffer!\n");
goto out;
}
}
if (must_refcnt) {
must_refcnt = 0;
if (qeth_eddp_buf_ref_context(buf, ctx)) {
- PRINT_WARN("no memory to create eddp context "
- "reference\n");
goto out_check;
}
}
portno = simple_strtoul(buf, &tmp, 16);
if (portno > QETH_MAX_PORTNO) {
- PRINT_WARN("portno 0x%X is out of range\n", portno);
return -EINVAL;
}
* if though we have to permit priority queueing
*/
if (card->qdio.no_out_queues == 1) {
- PRINT_WARN("Priority queueing disabled due "
- "to hardware limitations!\n");
card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT;
return -EPERM;
}
card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
} else {
- PRINT_WARN("Unknown queueing type '%s'\n", tmp);
return -EINVAL;
}
return count;
((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt);
if (old_cnt != cnt) {
rc = qeth_realloc_buffer_pool(card, cnt);
- if (rc)
- PRINT_WARN("Error (%d) while setting "
- "buffer count.\n", rc);
}
return count;
}
card->perf_stats.initial_rx_packets = card->stats.rx_packets;
card->perf_stats.initial_tx_packets = card->stats.tx_packets;
} else {
- PRINT_WARN("performance_stats: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
newdis = QETH_DISCIPLINE_LAYER2;
break;
default:
- PRINT_WARN("layer2: write 0 or 1 to this file!\n");
return -EINVAL;
}
} else if (!strcmp(tmp, "TSO")) {
type = QETH_LARGE_SEND_TSO;
} else {
- PRINT_WARN("large_send: invalid mode %s!\n", tmp);
return -EINVAL;
}
if (card->options.large_send == type)
if (i <= max_value) {
*value = i;
} else {
- PRINT_WARN("blkt total time: write values between"
- " 0 and %d to this file!\n", max_value);
return -EINVAL;
}
return count;
{
struct qeth_card *card;
struct net_device *ndev;
- unsigned char *readno;
- __u16 temp_dev_no, card_dev_no;
- char *endp;
+ __u16 temp_dev_no;
unsigned long flags;
+ struct ccw_dev_id read_devid;
ndev = NULL;
memcpy(&temp_dev_no, read_dev_no, 2);
read_lock_irqsave(&qeth_core_card_list.rwlock, flags);
list_for_each_entry(card, &qeth_core_card_list.list, list) {
- readno = CARD_RDEV_ID(card);
- readno += (strlen(readno) - 4);
- card_dev_no = simple_strtoul(readno, &endp, 16);
- if (card_dev_no == temp_dev_no) {
+ ccw_device_get_id(CARD_RDEV(card), &read_devid);
+ if (read_devid.devno == temp_dev_no) {
ndev = card->dev;
break;
}
mac = &cmd->data.setdelmac.mac[0];
/* MAC already registered, needed in couple/uncouple case */
if (cmd->hdr.return_code == 0x2005) {
- PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \
+ QETH_DBF_MESSAGE(2, "Group MAC %02x:%02x:%02x:%02x:%02x:%02x "
"already existing on %s \n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card));
cmd->hdr.return_code = 0;
}
if (cmd->hdr.return_code)
- PRINT_ERR("Could not set group MAC " \
+ QETH_DBF_MESSAGE(2, "Could not set group MAC "
"%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
cmd = (struct qeth_ipa_cmd *) data;
mac = &cmd->data.setdelmac.mac[0];
if (cmd->hdr.return_code)
- PRINT_ERR("Could not delete group MAC " \
+ QETH_DBF_MESSAGE(2, "Could not delete group MAC "
"%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
- if (!mc) {
- PRINT_ERR("no mem vor mc mac address\n");
+ if (!mc)
return;
- }
memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
mc->mc_addrlen = OSA_ADDR_LEN;
QETH_DBF_TEXT(TRACE, 2, "L2sdvcb");
cmd = (struct qeth_ipa_cmd *) data;
if (cmd->hdr.return_code) {
- PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. "
+ QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x. "
"Continuing\n", cmd->data.setdelvlan.vlan_id,
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
QETH_DBF_TEXT_(TRACE, 2, "L2VL%4x", cmd->hdr.command);
spin_lock_bh(&card->vlanlock);
list_add_tail(&id->list, &card->vid_list);
spin_unlock_bh(&card->vlanlock);
- } else {
- PRINT_ERR("no memory for vid\n");
}
}
rc = qeth_query_setadapterparms(card);
if (rc) {
- PRINT_WARN("could not query adapter parameters on device %s: "
- "x%x\n", CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "could not query adapter parameters on "
+ "device %s: x%x\n", CARD_BUS_ID(card), rc);
}
if (card->info.guestlan) {
rc = qeth_setadpparms_change_macaddr(card);
if (rc) {
- PRINT_WARN("couldn't get MAC address on "
- "device %s: x%x\n",
- CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "couldn't get MAC address on "
+ "device %s: x%x\n", CARD_BUS_ID(card), rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
return rc;
}
}
if (card->info.type == QETH_CARD_TYPE_OSN) {
- PRINT_WARN("Setting MAC address on %s is not supported.\n",
- dev->name);
QETH_DBF_TEXT(TRACE, 3, "setmcOSN");
return -EOPNOTSUPP;
}
ctx = qeth_eddp_create_context(card, new_skb, hdr,
skb->sk->sk_protocol);
if (ctx == NULL) {
- PRINT_WARN("could not create eddp context\n");
+ QETH_DBF_MESSAGE(2, "could not create eddp context\n");
goto tx_drop;
}
} else {
if ((new_skb != skb) && new_skb)
dev_kfree_skb_any(new_skb);
dev_kfree_skb_any(skb);
+ netif_wake_queue(dev);
return NETDEV_TX_OK;
}
(addr_t) iob, 0, 0);
spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags);
if (rc) {
- PRINT_WARN("qeth_osn_send_control_data: "
+ QETH_DBF_MESSAGE(2, "qeth_osn_send_control_data: "
"ccw_device_start rc = %i\n", rc);
QETH_DBF_TEXT_(TRACE, 2, " err%d", rc);
qeth_release_buffer(iob->channel, iob);
addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC);
if (addr == NULL) {
- PRINT_WARN("Not enough memory to add address\n");
return NULL;
}
addr->type = QETH_IP_TYPE_NORMAL;
}
}
out_inval:
- PRINT_WARN("Routing type '%s' not supported for interface %s.\n"
- "Router status set to 'no router'.\n",
- ((*type == PRIMARY_ROUTER)? "primary router" :
- (*type == SECONDARY_ROUTER)? "secondary router" :
- (*type == PRIMARY_CONNECTOR)? "primary connector" :
- (*type == SECONDARY_CONNECTOR)? "secondary connector" :
- (*type == MULTICAST_ROUTER)? "multicast router" :
- "unknown"),
- card->dev->name);
*type = NO_ROUTER;
}
QETH_PROT_IPV4);
if (rc) {
card->options.route4.type = NO_ROUTER;
- PRINT_WARN("Error (0x%04x) while setting routing type on %s. "
- "Type set to 'no router'.\n",
- rc, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
+ " on %s. Type set to 'no router'.\n", rc,
+ QETH_CARD_IFNAME(card));
}
return rc;
}
QETH_PROT_IPV6);
if (rc) {
card->options.route6.type = NO_ROUTER;
- PRINT_WARN("Error (0x%04x) while setting routing type on %s. "
- "Type set to 'no router'.\n",
- rc, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
+ " on %s. Type set to 'no router'.\n", rc,
+ QETH_CARD_IFNAME(card));
}
#endif
return rc;
if (!memcmp(ipatoe->addr, new->addr,
(ipatoe->proto == QETH_PROT_IPV4)? 4:16) &&
(ipatoe->mask_bits == new->mask_bits)) {
- PRINT_WARN("ipato entry already exists!\n");
rc = -EEXIST;
break;
}
rc = -EEXIST;
spin_unlock_irqrestore(&card->ip_lock, flags);
if (rc) {
- PRINT_WARN("Cannot add VIPA. Address already exists!\n");
return rc;
}
if (!qeth_l3_add_ip(card, ipaddr))
rc = -EEXIST;
spin_unlock_irqrestore(&card->ip_lock, flags);
if (rc) {
- PRINT_WARN("Cannot add RXIP. Address already exists!\n");
return rc;
}
if (!qeth_l3_add_ip(card, ipaddr))
IPA_SETADP_SET_BROADCAST_MODE,
card->options.broadcast_mode);
if (rc)
- PRINT_WARN("couldn't set broadcast mode on "
+ QETH_DBF_MESSAGE(2, "couldn't set broadcast mode on "
"device %s: x%x\n",
CARD_BUS_ID(card), rc);
rc = qeth_l3_send_setadp_mode(card,
IPA_SETADP_ALTER_MAC_ADDRESS,
card->options.macaddr_mode);
if (rc)
- PRINT_WARN("couldn't set macaddr mode on "
+ QETH_DBF_MESSAGE(2, "couldn't set macaddr mode on "
"device %s: x%x\n", CARD_BUS_ID(card), rc);
return rc;
}
if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL)
- PRINT_WARN("set adapter parameters not available "
+ QETH_DBF_MESSAGE(2, "set adapter parameters not available "
"to set broadcast mode, using ALLRINGS "
"on device %s:\n", CARD_BUS_ID(card));
if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL)
- PRINT_WARN("set adapter parameters not available "
+ QETH_DBF_MESSAGE(2, "set adapter parameters not available "
"to set macaddr mode, using NONCANONICAL "
"on device %s:\n", CARD_BUS_ID(card));
return 0;
card = netdev_priv(dev);
else if (rc == QETH_VLAN_CARD)
card = netdev_priv(vlan_dev_info(dev)->real_dev);
- if (card->options.layer2)
+ if (card && card->options.layer2)
card = NULL;
QETH_DBF_TEXT_(TRACE, 4, "%d", rc);
return card ;
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING,
no_entries);
if (rc) {
tmp = rc;
- PRINT_WARN("Could not set number of ARP entries on %s: "
- "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
+ QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on "
+ "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
qdata->no_entries * uentry_size){
QETH_DBF_TEXT_(TRACE, 4, "qaer3%i", -ENOMEM);
cmd->hdr.return_code = -ENOMEM;
- PRINT_WARN("query ARP user space buffer is too small for "
- "the returned number of ARP entries. "
- "Aborting query!\n");
goto out_error;
}
QETH_DBF_TEXT_(TRACE, 4, "anore%i",
if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/
IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
/* get size of userspace buffer and mask_bits -> 6 bytes */
qeth_l3_arp_query_cb, (void *)&qinfo);
if (rc) {
tmp = rc;
- PRINT_WARN("Error while querying ARP cache on %s: %s "
+ QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s "
"(0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
if (copy_to_user(udata, qinfo.udata, 4))
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
if (rc) {
tmp = rc;
qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- PRINT_WARN("Could not add ARP entry for address %s on %s: "
- "%s (0x%x/%d)\n",
- buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+ QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s "
+ "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
+ qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
}
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
memcpy(buf, entry, 12);
tmp = rc;
memset(buf, 0, 16);
qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- PRINT_WARN("Could not delete ARP entry for address %s on %s: "
- "%s (0x%x/%d)\n",
- buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+ QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s"
+ " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
+ qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
}
if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD))
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING,
IPA_CMD_ASS_ARP_FLUSH_CACHE, 0);
if (rc) {
tmp = rc;
- PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n",
- QETH_CARD_IFNAME(card),
+ QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s "
+ "(0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
ctx = qeth_eddp_create_context(card, new_skb, hdr,
skb->sk->sk_protocol);
if (ctx == NULL) {
- PRINT_WARN("could not create eddp context\n");
+ QETH_DBF_MESSAGE(2, "could not create eddp context\n");
goto tx_drop;
}
} else {
if ((new_skb != skb) && new_skb)
dev_kfree_skb_any(new_skb);
dev_kfree_skb_any(skb);
+ netif_wake_queue(dev);
return NETDEV_TX_OK;
}
} else if (!strcmp(tmp, "multicast_router")) {
route->type = MULTICAST_ROUTER;
} else {
- PRINT_WARN("Invalid routing type '%s'.\n", tmp);
return -EINVAL;
}
if (((card->state == CARD_STATE_SOFTSETUP) ||
return -EINVAL;
if (!qeth_is_supported(card, IPA_IPV6)) {
- PRINT_WARN("IPv6 not supported for interface %s.\n"
- "Routing status no changed.\n",
- QETH_CARD_IFNAME(card));
return -ENOTSUPP;
}
if ((i == 0) || (i == 1))
card->options.fake_broadcast = i;
else {
- PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) ||
(card->info.link_type == QETH_LINK_TYPE_LANE_TR))) {
- PRINT_WARN("Device is not a tokenring device!\n");
return -EINVAL;
}
card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS;
return count;
} else {
- PRINT_WARN("broadcast_mode: invalid mode %s!\n",
- tmp);
return -EINVAL;
}
return count;
if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) ||
(card->info.link_type == QETH_LINK_TYPE_LANE_TR))) {
- PRINT_WARN("Device is not a tokenring device!\n");
return -EINVAL;
}
QETH_TR_MACADDR_CANONICAL :
QETH_TR_MACADDR_NONCANONICAL;
else {
- PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
else if (!strcmp(tmp, "no_checksumming"))
card->options.checksum_type = NO_CHECKSUMMING;
else {
- PRINT_WARN("Unknown checksumming type '%s'\n", tmp);
return -EINVAL;
}
return count;
} else if (!strcmp(tmp, "0")) {
card->ipato.enabled = 0;
} else {
- PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
} else if (!strcmp(tmp, "0")) {
card->ipato.invert4 = 0;
} else {
- PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
/* get address string */
end = strchr(start, '/');
if (!end || (end - start >= 40)) {
- PRINT_WARN("Invalid format for ipato_addx/delx. "
- "Use <ip addr>/<mask bits>\n");
return -EINVAL;
}
strncpy(buffer, start, end - start);
if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
start = end + 1;
if (!strlen(start) ||
(tmp == start) ||
(*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) {
- PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n");
return -EINVAL;
}
return 0;
ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL);
if (!ipatoe) {
- PRINT_WARN("No memory to allocate ipato entry\n");
return -ENOMEM;
}
ipatoe->proto = proto;
} else if (!strcmp(tmp, "0")) {
card->ipato.invert6 = 0;
} else {
- PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
u8 *addr)
{
if (qeth_l3_string_to_ipaddr(buf, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
return 0;
u8 *addr)
{
if (qeth_l3_string_to_ipaddr(buf, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
return 0;
do_exit(SIGSEGV);
}
}
+EXPORT_SYMBOL_GPL(s390_handle_mcck);
/*
* returns 0 if all registers could be validated
/* ------------------------------------------------------------------ */
/* What type of processor the file is meant to run on. */
/* This will let us know whether to read sigWORDs as high/low or low/high. */
-#define PROC_INTEL 0x00 /* Intel 80x86 */
+#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */
#define PROC_MOTOROLA 0x01 /* Motorola 68K */
#define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */
#define PROC_ALPHA 0x03 /* DEC Alpha */
#define PROC_486 0x08 /* Intel 80486 */
#define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */
#define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */
+#define PROC_IA64 0x40 /* Intel IA64 processor */
/* PROC_i960: */
#define PROC_960RX 0x01 /* Intel 80960RC/RD */
*
* Return value:
* A pointer to located Scsi_Host or NULL.
+ *
+ * The caller must do a scsi_host_put() to drop the reference
+ * that scsi_host_get() took. The put_device() below dropped
+ * the reference from class_find_device().
**/
struct Scsi_Host *scsi_host_lookup(unsigned short hostnum)
{
struct Scsi_Host *shost = ERR_PTR(-ENXIO);
cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match);
- if (cdev)
+ if (cdev) {
shost = scsi_host_get(class_to_shost(cdev));
-
+ put_device(cdev);
+ }
return shost;
}
EXPORT_SYMBOL(scsi_host_lookup);
the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL,
0, sshdr, SR_TIMEOUT,
retries--);
+ if (scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION)
+ sdev->changed = 1;
} while (retries > 0 &&
(!scsi_status_is_good(the_result) ||
#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
#define DMA_RX_FLUSH_JIFFIES (HZ / 50)
+#define CTS_CHECK_JIFFIES (HZ / 50)
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
{
struct circ_buf *xmit = &uart->port.info->xmit;
- if (uart->port.x_char) {
- UART_PUT_CHAR(uart, uart->port.x_char);
- uart->port.icount.tx++;
- uart->port.x_char = 0;
- }
/*
* Check the modem control lines before
* transmitting anything.
return;
}
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ }
+
while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
}
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
- struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
- bfin_serial_mctrl_check(uart);
-}
-#endif
-
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
uart->tx_done = 0;
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ bfin_serial_mctrl_check(uart);
+
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
uart->tx_count = 0;
uart->tx_done = 1;
uart->port.x_char = 0;
}
- /*
- * Check the modem control lines before
- * transmitting anything.
- */
- bfin_serial_mctrl_check(uart);
-
uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
uart->tx_count = UART_XMIT_SIZE - xmit->tail;
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS)) {
tty->hw_stopped = 1;
- schedule_work(&uart->cts_workqueue);
+ uart->cts_timer.data = (unsigned long)(uart);
+ uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+ uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+ add_timer(&(uart->cts_timer));
} else {
tty->hw_stopped = 0;
}
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
init_timer(&(bfin_serial_ports[i].rx_dma_timer));
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+ init_timer(&(bfin_serial_ports[i].cts_timer));
bfin_serial_ports[i].cts_pin =
bfin_serial_resource[i].uart_cts_pin;
bfin_serial_ports[i].rts_pin =
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
{
struct device *dma_dev = ssb_dev->dma_dev;
+ int err = 0;
#ifdef CONFIG_SSB_PCIHOST
- if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI)
- return dma_set_mask(dma_dev, mask);
+ if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) {
+ err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask);
+ if (err)
+ return err;
+ err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask);
+ return err;
+ }
#endif
dma_dev->coherent_dma_mask = mask;
dma_dev->dma_mask = &dma_dev->coherent_dma_mask;
- return 0;
+ return err;
}
EXPORT_SYMBOL(ssb_dma_set_mask);
cooling devices.
All platforms with ACPI thermal support can use this driver.
If you want this support, you should say Y or M here.
+
+config THERMAL_HWMON
+ bool "Hardware monitoring support"
+ depends on HWMON=y || HWMON=THERMAL
+ help
+ The generic thermal sysfs driver's hardware monitoring support
+ requires a 2.10.7/3.0.2 or later lm-sensors userspace.
+
+ Say Y if your user-space is new enough.
/* Device management */
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
+
/* hwmon sys I/F */
#include <linux/hwmon.h>
static LIST_HEAD(thermal_hwmon_list);
#ifdef CONFIG_PM
+/* Try to identify which devices need USB-PERSIST handling */
+static int persistent_device(struct usb_device *udev)
+{
+ int i;
+ int retval;
+ struct usb_host_config *actconfig;
+
+ /* Explicitly not marked persistent? */
+ if (!udev->persist_enabled)
+ return 0;
+
+ /* No active config? */
+ actconfig = udev->actconfig;
+ if (!actconfig)
+ return 0;
+
+ /* FIXME! We should check whether it's open here or not! */
+
+ /*
+ * Check that all the interface drivers have a
+ * 'reset_resume' entrypoint
+ */
+ retval = 0;
+ for (i = 0; i < actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = actconfig->interface[i];
+ if (!intf->dev.driver)
+ continue;
+ driver = to_usb_driver(intf->dev.driver);
+ if (!driver->reset_resume)
+ return 0;
+ /*
+ * We have at least one driver, and that one
+ * has a reset_resume method.
+ */
+ retval = 1;
+ }
+ return retval;
+}
+
static void hub_restart(struct usb_hub *hub, int type)
{
struct usb_device *hdev = hub->hdev;
* turn off the various status changes to prevent
* khubd from disconnecting it later.
*/
- if (udev->persist_enabled && status == 0 &&
- !(portstatus & USB_PORT_STAT_ENABLE)) {
+ if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) &&
+ persistent_device(udev)) {
if (portchange & USB_PORT_STAT_C_ENABLE)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* appletouch */
+ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
module will be called r8a66597-hcd.
config SUPERH_ON_CHIP_R8A66597
- boolean "Enable SuperH on-chip USB like the R8A66597"
- depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+ boolean "Enable SuperH on-chip R8A66597 USB"
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
help
- Renesas SuperH processor has USB like the R8A66597.
- This driver supported processor is SH7366.
+ This driver enables support for the on-chip R8A66597 in the
+ SH7366 and SH7723 processors.
goto err_put;
}
- ret = usb_add_hcd(hcd, irq, irqflags);
- if (ret)
- goto err_unmap;
-
hcd->irq = irq;
hcd->rsrc_start = res_start;
hcd->rsrc_len = res_len;
+ ret = usb_add_hcd(hcd, irq, irqflags);
+ if (ret)
+ goto err_unmap;
+
return hcd;
err_unmap:
config USB_ISIGHTFW
tristate "iSight firmware loading support"
depends on USB
+ select FW_LOADER
help
This driver loads firmware for USB Apple iSight cameras, allowing
them to be driven by the USB video class driver available at
struct usb_device *dev = interface_to_usbdev(intf);
int llen, len, req, ret = 0;
const struct firmware *firmware;
- unsigned char *buf;
+ unsigned char *buf = kmalloc(50, GFP_KERNEL);
unsigned char data[4];
- char *ptr;
+ u8 *ptr;
+
+ if (!buf)
+ return -ENOMEM;
if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
printk(KERN_ERR "Unable to load isight firmware\n");
goto out;
}
- while (1) {
+ while (ptr+4 <= firmware->data+firmware->size) {
memcpy(data, ptr, 4);
len = (data[0] << 8 | data[1]);
req = (data[2] << 8 | data[3]);
continue;
for (; len > 0; req += 50) {
- llen = len > 50 ? 50 : len;
+ llen = min(len, 50);
len -= llen;
-
- buf = kmalloc(llen, GFP_KERNEL);
+ if (ptr+llen > firmware->data+firmware->size) {
+ printk(KERN_ERR
+ "Malformed isight firmware");
+ ret = -ENODEV;
+ goto out;
+ }
memcpy(buf, ptr, llen);
ptr += llen;
goto out;
}
- kfree(buf);
}
}
+
if (usb_control_msg
(dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
300) != 1) {
printk(KERN_ERR "isight firmware loading completion failed\n");
ret = -ENODEV;
}
+
out:
+ kfree(buf);
release_firmware(firmware);
return ret;
}
info->screen_size = board_size;
cinfo->unmap = cirrusfb_pci_unmap;
- printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ",
- info->screen_size >> 10, board_addr);
- printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n");
+ printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus "
+ "Logic chipset on PCI bus\n",
+ info->screen_size >> 10, board_addr);
pci_set_drvdata(pdev, info);
ret = cirrusfb_register(info);
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int fsl_diu_suspend(struct of_device *dev, pm_message_t state)
+static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state)
{
struct fsl_diu_data *machine_data;
return 0;
}
-static int fsl_diu_resume(struct of_device *dev)
+static int fsl_diu_resume(struct of_device *ofdev)
{
struct fsl_diu_data *machine_data;
static int __init hga_card_detect(void)
{
- int count=0;
+ int count = 0;
void __iomem *p, *q;
unsigned short p_save, q_save;
writew(0x55aa, p); if (readw(p) == 0x55aa) count++;
writew(p_save, p);
- if (count != 2) {
- return 0;
- }
+ if (count != 2)
+ goto error;
/* Ok, there is definitely a card registering at the correct
* memory location, so now we do an I/O port test.
*/
- if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */
- return 0;
- }
- if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */
- return 0;
- }
+ if (!test_hga_b(0x66, 0x0f)) /* cursor low register */
+ goto error;
+
+ if (!test_hga_b(0x99, 0x0f)) /* cursor low register */
+ goto error;
/* See if the card is a Hercules, by checking whether the vsync
* bit of the status register is changing. This test lasts for
}
if (p_save == q_save)
- return 0;
+ goto error;
switch (inb_p(HGA_STATUS_PORT) & 0x70) {
case 0x10:
break;
}
return 1;
+error:
+ if (release_io_ports)
+ release_region(0x3b0, 12);
+ if (release_io_port)
+ release_region(0x3bf, 1);
+ return 0;
}
/**
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/of_device.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/fbio.h>
#include "sbuslib.h"
static int leo_mmap(struct fb_info *, struct vm_area_struct *);
static int leo_ioctl(struct fb_info *, unsigned int, unsigned long);
-static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *);
/*
* Frame buffer operations
.owner = THIS_MODULE,
.fb_setcolreg = leo_setcolreg,
.fb_blank = leo_blank,
- .fb_pan_display = leo_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
#define LEO_CUR_TYPE_CMAP 0x00000050
struct leo_cursor {
- u8 xxx0[16];
+ u8 xxx0[16];
u32 cur_type;
u32 cur_misc;
u32 cur_cursxy;
struct leo_lc_ss0_krn {
u32 misc;
- u8 xxx0[0x800-4];
+ u8 xxx0[0x800-4];
u32 rev;
};
u32 fontt;
u32 extent;
u32 src;
- u32 dst;
+ u32 dst;
u32 copy;
u32 fill;
};
u8 unknown;
};
-struct leo_ld {
- u8 xxx0[0xe00];
+struct leo_ld_ss0 {
+ u8 xxx0[0xe00];
u32 csr;
u32 wid;
u32 wmask;
u32 src; /* Copy/Scroll (SS0 only) */
u32 dst; /* Copy/Scroll/Fill (SS0 only) */
u32 extent; /* Copy/Scroll/Fill size (SS0 only) */
- u32 xxx1[3];
+ u32 xxx1[3];
u32 setsem; /* SS1 only */
u32 clrsem; /* SS1 only */
u32 clrpick; /* SS1 only */
u32 clrdat; /* SS1 only */
u32 alpha; /* SS1 only */
- u8 xxx2[0x2c];
+ u8 xxx2[0x2c];
u32 winbg;
u32 planemask;
u32 rop;
static void leo_wait(struct leo_lx_krn __iomem *lx_krn)
{
int i;
-
+
for (i = 0;
- (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000;
+ (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) &&
+ i < 300000;
i++)
- udelay (1); /* Busy wait at most 0.3 sec */
+ udelay(1); /* Busy wait at most 0.3 sec */
return;
}
unsigned transp, struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
- struct leo_lx_krn __iomem *lx_krn = par->lx_krn;
+ struct leo_lx_krn __iomem *lx_krn = par->lx_krn;
unsigned long flags;
u32 val;
int i;
leo_wait(lx_krn);
for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) {
- switch(wi->wi_type) {
+ switch (wi->wi_type) {
case FB_WID_DBL_8:
j = (wi->wi_index & 0xf) + 0x40;
break;
wi.wi_index = 1;
wi.wi_values [0] = 0x30;
leo_wid_put(info, &wl);
-
}
static void leo_switch_from_graph(struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
- struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0;
+ struct leo_ld_ss0 __iomem *ss = par->ld_ss0;
unsigned long flags;
u32 val;
val = sbus_readl(&par->lc_ss0_usr->csr);
} while (val & 0x20000000);
- spin_unlock_irqrestore(&par->lock, flags);
-}
-
-static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- /* We just use this to catch switches out of
- * graphics mode.
- */
- leo_switch_from_graph(info);
+ /* setup screen buffer for cfb_* functions */
+ sbus_writel(1, &ss->wid);
+ sbus_writel(0x00ffffff, &ss->planemask);
+ sbus_writel(0x310b90, &ss->rop);
+ sbus_writel(0, &par->lc_ss0_usr->addrspace);
- if (var->xoffset || var->yoffset || var->vmode)
- return -EINVAL;
- return 0;
+ spin_unlock_irqrestore(&par->lock, flags);
}
static void leo_init_hw(struct fb_info *info)
of_iounmap(&op->resource[0], info->screen_base, 0x800000);
}
-static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit leo_probe(struct of_device *op,
+ const struct of_device_id *match)
{
struct device_node *dp = op->node;
struct fb_info *info;
!info->screen_base)
goto out_unmap_regs;
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+ info->flags = FBINFO_DEFAULT;
info->fbops = &leo_ops;
+ info->pseudo_palette = par->clut_data;
leo_init_wids(info);
leo_init_hw(info);
static struct of_device_id leo_match[] = {
{
- .name = "leo",
+ .name = "SUNW,leo",
},
{},
};
dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
} else {
- pal_desc = &fbi->dma_buff->pal_desc[dma];
- pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]);
+ pal_desc = &fbi->dma_buff->pal_desc[pal];
+ pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]);
pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE;
pal_desc->fidr = 0;
fbi->dma_buff_phys = fbi->map_dma;
fbi->palette_cpu = (u16 *) fbi->dma_buff->palette;
+ pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16));
+
#ifdef CONFIG_FB_PXA_SMARTPANEL
fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
fbi->n_smart_cmds = 0;
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else {
- add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
/* They should never have set feature bits beyond 32 */
dev->config->set_features(dev, dev->features[0]);
+ add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
}
return err;
}
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+
#ifndef CONFIG_X86_64
/* --32 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 32
-static void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
-{
- asm("pushl %ebp \n\t"
- "movl %esp, %ebp \n\t"
- "pusha \n\t"
- "pushf \n\t"
- "push %es \n\t"
- "push %ds \n\t"
- "pop %es \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl 4(%eax),%ebx \n\t"
- "movl 8(%eax),%ecx \n\t"
- "movl 12(%eax),%edx \n\t"
- "movl 16(%eax),%esi \n\t"
- "movl 20(%eax),%edi \n\t"
- "movl (%eax),%eax \n\t"
- "push %cs \n\t"
- "call *12(%ebp) \n\t"
- "pushf \n\t"
- "pushl %eax \n\t"
- "movl 8(%ebp),%eax \n\t"
- "movl %ebx,4(%eax) \n\t"
- "movl %ecx,8(%eax) \n\t"
- "movl %edx,12(%eax) \n\t"
- "movl %esi,16(%eax) \n\t"
- "movl %edi,20(%eax) \n\t"
- "movw %ds,24(%eax) \n\t"
- "movw %es,26(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,(%eax) \n\t"
- "popl %ebx \n\t"
- "movl %ebx,28(%eax) \n\t"
- "pop %es \n\t"
- "popf \n\t"
- "popa \n\t"
- "leave \n\t" "ret");
-}
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushl %ebp \n\t"
+ "movl %esp, %ebp \n\t"
+ "pusha \n\t"
+ "pushf \n\t"
+ "push %es \n\t"
+ "push %ds \n\t"
+ "pop %es \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl 4(%eax),%ebx \n\t"
+ "movl 8(%eax),%ecx \n\t"
+ "movl 12(%eax),%edx \n\t"
+ "movl 16(%eax),%esi \n\t"
+ "movl 20(%eax),%edi \n\t"
+ "movl (%eax),%eax \n\t"
+ "push %cs \n\t"
+ "call *12(%ebp) \n\t"
+ "pushf \n\t"
+ "pushl %eax \n\t"
+ "movl 8(%ebp),%eax \n\t"
+ "movl %ebx,4(%eax) \n\t"
+ "movl %ecx,8(%eax) \n\t"
+ "movl %edx,12(%eax) \n\t"
+ "movl %esi,16(%eax) \n\t"
+ "movl %edi,20(%eax) \n\t"
+ "movw %ds,24(%eax) \n\t"
+ "movw %es,26(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,(%eax) \n\t"
+ "popl %ebx \n\t"
+ "movl %ebx,28(%eax) \n\t"
+ "pop %es \n\t"
+ "popf \n\t"
+ "popa \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
+
/*
* cru_detect
#define HPWDT_ARCH 64
-static void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
-{
- asm("pushq %rbp \n\t"
- "movq %rsp, %rbp \n\t"
- "pushq %rax \n\t"
- "pushq %rbx \n\t"
- "pushq %rdx \n\t"
- "pushq %r12 \n\t"
- "pushq %r9 \n\t"
- "movq %rsi, %r12 \n\t"
- "movq %rdi, %r9 \n\t"
- "movl 4(%r9),%ebx \n\t"
- "movl 8(%r9),%ecx \n\t"
- "movl 12(%r9),%edx \n\t"
- "movl 16(%r9),%esi \n\t"
- "movl 20(%r9),%edi \n\t"
- "movl (%r9),%eax \n\t"
- "call *%r12 \n\t"
- "pushfq \n\t"
- "popq %r12 \n\t"
- "popfq \n\t"
- "movl %eax, (%r9) \n\t"
- "movl %ebx, 4(%r9) \n\t"
- "movl %ecx, 8(%r9) \n\t"
- "movl %edx, 12(%r9) \n\t"
- "movl %esi, 16(%r9) \n\t"
- "movl %edi, 20(%r9) \n\t"
- "movq %r12, %rax \n\t"
- "movl %eax, 28(%r9) \n\t"
- "popq %r9 \n\t"
- "popq %r12 \n\t"
- "popq %rdx \n\t"
- "popq %rbx \n\t"
- "popq %rax \n\t"
- "leave \n\t" "ret");
-}
+asm(".text \n\t"
+ ".align 4 \n"
+ "asminline_call: \n\t"
+ "pushq %rbp \n\t"
+ "movq %rsp, %rbp \n\t"
+ "pushq %rax \n\t"
+ "pushq %rbx \n\t"
+ "pushq %rdx \n\t"
+ "pushq %r12 \n\t"
+ "pushq %r9 \n\t"
+ "movq %rsi, %r12 \n\t"
+ "movq %rdi, %r9 \n\t"
+ "movl 4(%r9),%ebx \n\t"
+ "movl 8(%r9),%ecx \n\t"
+ "movl 12(%r9),%edx \n\t"
+ "movl 16(%r9),%esi \n\t"
+ "movl 20(%r9),%edi \n\t"
+ "movl (%r9),%eax \n\t"
+ "call *%r12 \n\t"
+ "pushfq \n\t"
+ "popq %r12 \n\t"
+ "popfq \n\t"
+ "movl %eax, (%r9) \n\t"
+ "movl %ebx, 4(%r9) \n\t"
+ "movl %ecx, 8(%r9) \n\t"
+ "movl %edx, 12(%r9) \n\t"
+ "movl %esi, 16(%r9) \n\t"
+ "movl %edi, 20(%r9) \n\t"
+ "movq %r12, %rax \n\t"
+ "movl %eax, 28(%r9) \n\t"
+ "popq %r9 \n\t"
+ "popq %r12 \n\t"
+ "popq %rdx \n\t"
+ "popq %rbx \n\t"
+ "popq %rax \n\t"
+ "leave \n\t"
+ "ret \n\t"
+ ".previous");
/*
* dmi_find_cru
static unsigned long rom_pl;
static int die_nmi_called;
- if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral != 0) {
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
- }
+ if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+ return NOTIFY_OK;
+
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral == 0) {
+ printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ "but unable to determine source.\n");
+ } else {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
}
- die_nmi_called = 0;
- return NOTIFY_DONE;
+ return NOTIFY_STOP;
}
/*
#ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */
/* Clear master flag /before/ clearing selector flag. */
- rmb();
+ wmb();
#endif
pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
while (pending_words != 0) {
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/binfmts.h>
struct {
struct elfhdr elf_ex;
struct elfhdr interp_elf_ex;
- struct exec interp_ex;
} *loc;
loc = kmalloc(sizeof(*loc), GFP_KERNEL);
}
/* Get the exec headers */
- loc->interp_ex = *((struct exec *)bprm->buf);
loc->interp_elf_ex = *((struct elfhdr *)bprm->buf);
break;
}
struct gendisk *disk;
int ret;
int part;
+ int perm = 0;
- ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode);
+ if (file->f_mode & FMODE_READ)
+ perm |= MAY_READ;
+ if (file->f_mode & FMODE_WRITE)
+ perm |= MAY_WRITE;
+ /*
+ * hooks: /n/, see "layering violations".
+ */
+ ret = devcgroup_inode_permission(bdev->bd_inode, perm);
if (ret != 0)
return ret;
------------
DFS support added (Microsoft Distributed File System client support needed
for referrals which enable a hierarchical name space among servers).
+Disable temporary caching of mode bits to servers which do not support
+storing of mode (e.g. Windows servers, when client mounts without cifsacl
+mount option) and add new "dynperm" mount option to enable temporary caching
+of mode (enable old behavior). Fix hang on mount caused when server crashes
+tcp session during negotiate protocol.
Version 1.52
------------
{
struct inode *inode;
struct cifs_sb_info *cifs_sb;
-#ifdef CONFIG_CIFS_DFS_UPCALL
- int len;
-#endif
int rc = 0;
/* BB should we make this contingent on mount parm? */
* complex operation (mount), and in case of fail
* just exit instead of doing mount and attempting
* undo it if this copy fails?*/
- len = strlen(data);
- cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
- if (cifs_sb->mountdata == NULL) {
- kfree(sb->s_fs_info);
- sb->s_fs_info = NULL;
- return -ENOMEM;
+ if (data) {
+ int len = strlen(data);
+ cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
+ if (cifs_sb->mountdata == NULL) {
+ kfree(sb->s_fs_info);
+ sb->s_fs_info = NULL;
+ return -ENOMEM;
+ }
+ strncpy(cifs_sb->mountdata, data, len + 1);
+ cifs_sb->mountdata[len] = '\0';
}
- strncpy(cifs_sb->mountdata, data, len + 1);
- cifs_sb->mountdata[len] = '\0';
#endif
rc = cifs_mount(sb, cifs_sb, data, devname);
bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
struct semaphore fh_sem; /* prevents reopen race after dead ses*/
- char *search_resume_name; /* BB removeme BB */
struct cifs_search_info srch_inf;
};
GLOBAL_EXTERN atomic_t tcpSesReconnectCount;
GLOBAL_EXTERN atomic_t tconInfoReconnectCount;
-/* Various Debug counters to remove someday (BB) */
+/* Various Debug counters */
GLOBAL_EXTERN atomic_t bufAllocCount; /* current number allocated */
#ifdef CONFIG_CIFS_STATS2
GLOBAL_EXTERN atomic_t totBufAllocCount; /* total allocated over all time */
#define TRANS2_GET_DFS_REFERRAL 0x10
#define TRANS2_REPORT_DFS_INCOSISTENCY 0x11
+/* SMB Transact (Named Pipe) subcommand codes */
+#define TRANS_SET_NMPIPE_STATE 0x0001
+#define TRANS_RAW_READ_NMPIPE 0x0011
+#define TRANS_QUERY_NMPIPE_STATE 0x0021
+#define TRANS_QUERY_NMPIPE_INFO 0x0022
+#define TRANS_PEEK_NMPIPE 0x0023
+#define TRANS_TRANSACT_NMPIPE 0x0026
+#define TRANS_RAW_WRITE_NMPIPE 0x0031
+#define TRANS_READ_NMPIPE 0x0036
+#define TRANS_WRITE_NMPIPE 0x0037
+#define TRANS_WAIT_NMPIPE 0x0053
+#define TRANS_CALL_NMPIPE 0x0054
+
/* NT Transact subcommand codes */
#define NT_TRANSACT_CREATE 0x01
#define NT_TRANSACT_IOCTL 0x02
#define CREATE_COMPLETE_IF_OPLK 0x00000100 /* should be zero */
#define CREATE_NO_EA_KNOWLEDGE 0x00000200
#define CREATE_EIGHT_DOT_THREE 0x00000400 /* doc says this is obsolete
- open for recovery flag - should
- be zero */
+ "open for recovery" flag - should
+ be zero in any case */
+#define CREATE_OPEN_FOR_RECOVERY 0x00000400
#define CREATE_RANDOM_ACCESS 0x00000800
#define CREATE_DELETE_ON_CLOSE 0x00001000
#define CREATE_OPEN_BY_ID 0x00002000
-#define CREATE_OPEN_BACKUP_INTN 0x00004000
+#define CREATE_OPEN_BACKUP_INTENT 0x00004000
#define CREATE_NO_COMPRESSION 0x00008000
#define CREATE_RESERVE_OPFILTER 0x00100000 /* should be zero */
#define OPEN_REPARSE_POINT 0x00200000
#define SMB_CSC_CACHE_AUTO_REINT 0x0004
#define SMB_CSC_CACHE_VDO 0x0008
#define SMB_CSC_NO_CACHING 0x000C
-
#define SMB_UNIQUE_FILE_NAME 0x0010
#define SMB_EXTENDED_SIGNATURES 0x0020
#define ICOUNT_MASK 0x00FF
#define PIPE_READ_MODE 0x0100
#define NAMED_PIPE_TYPE 0x0400
-#define PIPE_END_POINT 0x0800
+#define PIPE_END_POINT 0x4000
#define BLOCKING_NAMED_PIPE 0x8000
typedef struct smb_com_open_req { /* also handles create */
{
int rc = 0;
LOCK_REQ *pSMB = NULL;
- LOCK_RSP *pSMBr = NULL;
+/* LOCK_RSP *pSMBr = NULL; */ /* No response data other than rc to parse */
int bytes_returned;
int timeout = 0;
__u16 count;
if (rc)
return rc;
- pSMBr = (LOCK_RSP *)pSMB; /* BB removeme BB */
-
if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) {
timeout = CIFS_ASYNC_OP; /* no response expected */
pSMB->Timeout = 0;
if (waitFlag) {
rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned);
+ (struct smb_hdr *) pSMB, &bytes_returned);
cifs_small_buf_release(pSMB);
} else {
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *)pSMB,
spin_lock(&GlobalMid_Lock);
server->tcpStatus = CifsExiting;
spin_unlock(&GlobalMid_Lock);
+ wake_up_all(&server->response_q);
/* don't exit until kthread_stop is called */
set_current_state(TASK_UNINTERRUPTIBLE);
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
}
+ if ((volume_info.cifs_acl) && (volume_info.dynperm))
+ cERROR(1, ("mount option dynperm ignored if cifsacl "
+ "mount option supported"));
+
tcon =
find_unc(sin_server.sin_addr.s_addr, volume_info.UNC,
volume_info.username);
buf, inode->i_sb, xid,
&fileHandle);
if (newinode) {
- newinode->i_mode = mode;
+ if (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_DYNPERM)
+ newinode->i_mode = mode;
if ((oplock & CIFS_CREATE_ACTION) &&
(cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_SET_UID)) {
msleep(timeout);
timeout *= 8;
}
- kfree(pSMBFile->search_resume_name);
kfree(file->private_data);
file->private_data = NULL;
} else
else
cifs_buf_release(ptmp);
}
- ptmp = pCFileStruct->search_resume_name;
- if (ptmp) {
- cFYI(1, ("closedir free resume name"));
- pCFileStruct->search_resume_name = NULL;
- kfree(ptmp);
- }
kfree(file->private_data);
file->private_data = NULL;
}
char *buf = NULL;
bool adjustTZ = false;
bool is_dfs_referral = false;
+ umode_t default_mode;
pTcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", full_path));
inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
}
- /* set default mode. will override for dirs below */
- if (atomic_read(&cifsInfo->inUse) == 0)
- /* new inode, can safely set these fields */
- inode->i_mode = cifs_sb->mnt_file_mode;
- else /* since we set the inode type below we need to mask off
- to avoid strange results if type changes and both
- get orred in */
- inode->i_mode &= ~S_IFMT;
-/* if (attr & ATTR_REPARSE) */
- /* We no longer handle these as symlinks because we could not
- follow them due to the absolute path with drive letter */
- if (attr & ATTR_DIRECTORY) {
- /* override default perms since we do not do byte range locking
- on dirs */
- inode->i_mode = cifs_sb->mnt_dir_mode;
- inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
- /* No need to le64 convert size of zero */
- (pfindData->EndOfFile == 0)) {
- inode->i_mode = cifs_sb->mnt_file_mode;
- inode->i_mode |= S_IFIFO;
-/* BB Finish for SFU style symlinks and devices */
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
- if (decode_sfu_inode(inode, le64_to_cpu(pfindData->EndOfFile),
- full_path, cifs_sb, xid))
- cFYI(1, ("Unrecognized sfu inode type"));
-
- cFYI(1, ("sfu mode 0%o", inode->i_mode));
+ /* get default inode mode */
+ if (attr & ATTR_DIRECTORY)
+ default_mode = cifs_sb->mnt_dir_mode;
+ else
+ default_mode = cifs_sb->mnt_file_mode;
+
+ /* set permission bits */
+ if (atomic_read(&cifsInfo->inUse) == 0 ||
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ inode->i_mode = default_mode;
+ else {
+ /* just reenable write bits if !ATTR_READONLY */
+ if ((inode->i_mode & S_IWUGO) == 0 &&
+ (attr & ATTR_READONLY) == 0)
+ inode->i_mode |= (S_IWUGO & default_mode);
+ inode->i_mode &= ~S_IFMT;
+ }
+ /* clear write bits if ATTR_READONLY is set */
+ if (attr & ATTR_READONLY)
+ inode->i_mode &= ~S_IWUGO;
+
+ /* set inode type */
+ if ((attr & ATTR_SYSTEM) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
+ /* no need to fix endianness on 0 */
+ if (pfindData->EndOfFile == 0)
+ inode->i_mode |= S_IFIFO;
+ else if (decode_sfu_inode(inode,
+ le64_to_cpu(pfindData->EndOfFile),
+ full_path, cifs_sb, xid))
+ cFYI(1, ("unknown SFU file type\n"));
} else {
- inode->i_mode |= S_IFREG;
- /* treat dos attribute of read-only as read-only mode eg 555 */
- if (cifsInfo->cifsAttrs & ATTR_READONLY)
- inode->i_mode &= ~(S_IWUGO);
- else if ((inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been */
- /* changed on server -- set any w bits */
- /* allowed by mnt_file_mode */
- inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
- /* BB add code to validate if device or weird share or device type? */
+ if (attr & ATTR_DIRECTORY)
+ inode->i_mode |= S_IFDIR;
+ else
+ inode->i_mode |= S_IFREG;
}
spin_lock(&inode->i_lock);
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
if (direntry->d_inode) {
- direntry->d_inode->i_mode = mode;
- direntry->d_inode->i_mode |= S_IFDIR;
+ if (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_DYNPERM)
+ direntry->d_inode->i_mode =
+ (mode | S_IFDIR);
+
if (cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_SET_UID) {
direntry->d_inode->i_uid =
} else
goto cifs_setattr_exit;
}
- if (attrs->ia_valid & ATTR_UID) {
- cFYI(1, ("UID changed to %d", attrs->ia_uid));
- uid = attrs->ia_uid;
- }
- if (attrs->ia_valid & ATTR_GID) {
- cFYI(1, ("GID changed to %d", attrs->ia_gid));
- gid = attrs->ia_gid;
+
+ /*
+ * Without unix extensions we can't send ownership changes to the
+ * server, so silently ignore them. This is consistent with how
+ * local DOS/Windows filesystems behave (VFAT, NTFS, etc). With
+ * CIFSACL support + proper Windows to Unix idmapping, we may be
+ * able to support this in the future.
+ */
+ if (!pTcon->unix_ext &&
+ !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+ attrs->ia_valid &= ~(ATTR_UID | ATTR_GID);
+ } else {
+ if (attrs->ia_valid & ATTR_UID) {
+ cFYI(1, ("UID changed to %d", attrs->ia_uid));
+ uid = attrs->ia_uid;
+ }
+ if (attrs->ia_valid & ATTR_GID) {
+ cFYI(1, ("GID changed to %d", attrs->ia_gid));
+ gid = attrs->ia_gid;
+ }
}
time_buf.Attributes = 0;
attrs->ia_valid &= ~ATTR_MODE;
if (attrs->ia_valid & ATTR_MODE) {
- cFYI(1, ("Mode changed to 0x%x", attrs->ia_mode));
+ cFYI(1, ("Mode changed to 0%o", attrs->ia_mode));
mode = attrs->ia_mode;
}
#ifdef CONFIG_CIFS_EXPERIMENTAL
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
rc = mode_to_acl(inode, full_path, mode);
- else if ((mode & S_IWUGO) == 0) {
-#else
- if ((mode & S_IWUGO) == 0) {
+ else
#endif
- /* not writeable */
- if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
- set_dosattr = true;
- time_buf.Attributes =
- cpu_to_le32(cifsInode->cifsAttrs |
- ATTR_READONLY);
- }
- } else if (cifsInode->cifsAttrs & ATTR_READONLY) {
+ if (((mode & S_IWUGO) == 0) &&
+ (cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
+ set_dosattr = true;
+ time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs |
+ ATTR_READONLY);
+ /* fix up mode if we're not using dynperm */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ attrs->ia_mode = inode->i_mode & ~S_IWUGO;
+ } else if ((mode & S_IWUGO) &&
+ (cifsInode->cifsAttrs & ATTR_READONLY)) {
/* If file is readonly on server, we would
not be able to write to it - so if any write
bit is enabled for user or group or other we
/* Windows ignores set to zero */
if (time_buf.Attributes == 0)
time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL);
+
+ /* reset local inode permissions to normal */
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
+ attrs->ia_mode &= ~(S_IALLUGO);
+ if (S_ISDIR(inode->i_mode))
+ attrs->ia_mode |=
+ cifs_sb->mnt_dir_mode;
+ else
+ attrs->ia_mode |=
+ cifs_sb->mnt_file_mode;
+ }
+ } else if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
+ /* ignore mode change - ATTR_READONLY hasn't changed */
+ attrs->ia_valid &= ~ATTR_MODE;
}
}
pnotify = (struct file_notify_information *)
((char *)&pSMBr->hdr.Protocol + data_offset);
cFYI(1, ("dnotify on %s Action: 0x%x",
- pnotify->FileName,
- pnotify->Action)); /* BB removeme BB */
+ pnotify->FileName, pnotify->Action));
/* cifs_dump_mem("Rcvd notify Data: ",buf,
sizeof(struct smb_hdr)+60); */
return true;
__u32 attr;
__u64 allocation_size;
__u64 end_of_file;
+ umode_t default_mode;
/* save mtime and size */
local_mtime = tmp_inode->i_mtime;
if (atomic_read(&cifsInfo->inUse) == 0) {
tmp_inode->i_uid = cifs_sb->mnt_uid;
tmp_inode->i_gid = cifs_sb->mnt_gid;
- /* set default mode. will override for dirs below */
- tmp_inode->i_mode = cifs_sb->mnt_file_mode;
- } else {
- /* mask off the type bits since it gets set
- below and we do not want to get two type
- bits set */
+ }
+
+ if (attr & ATTR_DIRECTORY)
+ default_mode = cifs_sb->mnt_dir_mode;
+ else
+ default_mode = cifs_sb->mnt_file_mode;
+
+ /* set initial permissions */
+ if ((atomic_read(&cifsInfo->inUse) == 0) ||
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ tmp_inode->i_mode = default_mode;
+ else {
+ /* just reenable write bits if !ATTR_READONLY */
+ if ((tmp_inode->i_mode & S_IWUGO) == 0 &&
+ (attr & ATTR_READONLY) == 0)
+ tmp_inode->i_mode |= (S_IWUGO & default_mode);
+
tmp_inode->i_mode &= ~S_IFMT;
}
- if (attr & ATTR_DIRECTORY) {
- *pobject_type = DT_DIR;
- /* override default perms since we do not lock dirs */
- if (atomic_read(&cifsInfo->inUse) == 0)
- tmp_inode->i_mode = cifs_sb->mnt_dir_mode;
- tmp_inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (attr & ATTR_SYSTEM)) {
+ /* clear write bits if ATTR_READONLY is set */
+ if (attr & ATTR_READONLY)
+ tmp_inode->i_mode &= ~S_IWUGO;
+
+ /* set inode type */
+ if ((attr & ATTR_SYSTEM) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
if (end_of_file == 0) {
- *pobject_type = DT_FIFO;
tmp_inode->i_mode |= S_IFIFO;
+ *pobject_type = DT_FIFO;
} else {
- /* rather than get the type here, we mark the
- inode as needing revalidate and get the real type
- (blk vs chr vs. symlink) later ie in lookup */
- *pobject_type = DT_REG;
+ /*
+ * trying to get the type can be slow, so just call
+ * this a regular file for now, and mark for reval
+ */
tmp_inode->i_mode |= S_IFREG;
+ *pobject_type = DT_REG;
cifsInfo->time = 0;
}
-/* we no longer mark these because we could not follow them */
-/* } else if (attr & ATTR_REPARSE) {
- *pobject_type = DT_LNK;
- tmp_inode->i_mode |= S_IFLNK; */
} else {
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- if (attr & ATTR_READONLY)
- tmp_inode->i_mode &= ~(S_IWUGO);
- else if ((tmp_inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been changed on */
- /* server -- set any w bits allowed by mnt_file_mode */
- tmp_inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
- } /* could add code here - to validate if device or weird share type? */
+ if (attr & ATTR_DIRECTORY) {
+ tmp_inode->i_mode |= S_IFDIR;
+ *pobject_type = DT_DIR;
+ } else {
+ tmp_inode->i_mode |= S_IFREG;
+ *pobject_type = DT_REG;
+ }
+ }
/* can not fill in nlink here as in qpathinfo version and Unx search */
if (atomic_read(&cifsInfo->inUse) == 0)
cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
}
- kfree(cifsFile->search_resume_name);
- cifsFile->search_resume_name = NULL;
if (cifsFile->srch_inf.ntwrk_buf_start) {
cFYI(1, ("freeing SMB ff cache buf on search rewind"));
if (cifsFile->srch_inf.smallBuf)
} /* else {
cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
- }
- kfree(cifsFile->search_resume_name);
- cifsFile->search_resume_name = NULL; */
+ } */
rc = find_cifs_entry(xid, pTcon, file,
¤t_entry, &num_to_fill);
#include <linux/syscalls.h>
#include <linux/string.h>
#include <linux/mm.h>
+#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/fsnotify.h>
#include <linux/slab.h>
/*
* Release the dentry's inode, using the filesystem
* d_iput() operation if defined.
- * Called with dcache_lock and per dentry lock held, drops both.
*/
static void dentry_iput(struct dentry * dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
{
struct inode *inode = dentry->d_inode;
if (inode) {
* d_kill - kill dentry and return parent
* @dentry: dentry to kill
*
- * Called with dcache_lock and d_lock, releases both. The dentry must
- * already be unhashed and removed from the LRU.
+ * The dentry must already be unhashed and removed from the LRU.
*
* If this is the root of the dentry tree, return NULL.
*/
static struct dentry *d_kill(struct dentry *dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
{
struct dentry *parent;
* Try to prune ancestors as well. This is necessary to prevent
* quadratic behavior of shrink_dcache_parent(), but is also expected
* to be beneficial in reducing dentry cache fragmentation.
- *
- * Called with dcache_lock, drops it and then regains.
- * Called with dentry->d_lock held, drops it.
*/
static void prune_one_dentry(struct dentry * dentry)
+ __releases(dentry->d_lock)
+ __releases(dcache_lock)
+ __acquires(dcache_lock)
{
__d_drop(dentry);
dentry = d_kill(dentry);
*
* Note: If ever the locking in lock_rename() changes, then please
* remember to update this too...
- *
- * On return, dcache_lock will have been unlocked.
*/
static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias)
+ __releases(dcache_lock)
{
struct mutex *m1 = NULL, *m2 = NULL;
struct dentry *ret;
shouldnt_be_hashed:
spin_unlock(&dcache_lock);
BUG();
- goto shouldnt_be_hashed;
}
-static int prepend(char **buffer, int *buflen, const char *str,
- int namelen)
+static int prepend(char **buffer, int *buflen, const char *str, int namelen)
{
*buflen -= namelen;
if (*buflen < 0)
return 0;
}
+static int prepend_name(char **buffer, int *buflen, struct qstr *name)
+{
+ return prepend(buffer, buflen, name->name, name->len);
+}
+
/**
- * d_path - return the path of a dentry
+ * __d_path - return the path of a dentry
* @path: the dentry/vfsmount to report
* @root: root vfsmnt/dentry (may be modified by this function)
* @buffer: buffer to return value in
{
struct dentry *dentry = path->dentry;
struct vfsmount *vfsmnt = path->mnt;
- char * end = buffer+buflen;
- char * retval;
+ char *end = buffer + buflen;
+ char *retval;
+ spin_lock(&vfsmount_lock);
prepend(&end, &buflen, "\0", 1);
if (!IS_ROOT(dentry) && d_unhashed(dentry) &&
(prepend(&end, &buflen, " (deleted)", 10) != 0))
break;
if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) {
/* Global root? */
- spin_lock(&vfsmount_lock);
if (vfsmnt->mnt_parent == vfsmnt) {
- spin_unlock(&vfsmount_lock);
goto global_root;
}
dentry = vfsmnt->mnt_mountpoint;
vfsmnt = vfsmnt->mnt_parent;
- spin_unlock(&vfsmount_lock);
continue;
}
parent = dentry->d_parent;
prefetch(parent);
- if ((prepend(&end, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0) ||
+ if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
(prepend(&end, &buflen, "/", 1) != 0))
goto Elong;
retval = end;
dentry = parent;
}
+out:
+ spin_unlock(&vfsmount_lock);
return retval;
global_root:
retval += 1; /* hit the slash */
- if (prepend(&retval, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0)
+ if (prepend_name(&retval, &buflen, &dentry->d_name) != 0)
goto Elong;
root->mnt = vfsmnt;
root->dentry = dentry;
- return retval;
+ goto out;
+
Elong:
- return ERR_PTR(-ENAMETOOLONG);
+ retval = ERR_PTR(-ENAMETOOLONG);
+ goto out;
}
/**
*
* Returns the buffer or an error code if the path was too long.
*
- * "buflen" should be positive. Caller holds the dcache_lock.
+ * "buflen" should be positive.
*/
-char *d_path(struct path *path, char *buf, int buflen)
+char *d_path(const struct path *path, char *buf, int buflen)
{
char *res;
struct path root;
retval = end-1;
*retval = '/';
- for (;;) {
- struct dentry *parent;
- if (IS_ROOT(dentry))
- break;
+ while (!IS_ROOT(dentry)) {
+ struct dentry *parent = dentry->d_parent;
- parent = dentry->d_parent;
prefetch(parent);
-
- if ((prepend(&end, &buflen, dentry->d_name.name,
- dentry->d_name.len) != 0) ||
+ if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
(prepend(&end, &buflen, "/", 1) != 0))
goto Elong;
error = -ENOENT;
/* Has the current directory has been unlinked? */
spin_lock(&dcache_lock);
- if (pwd.dentry->d_parent == pwd.dentry || !d_unhashed(pwd.dentry)) {
+ if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) {
unsigned long len;
struct path tmp = root;
char * cwd;
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/stat.h>
#include <linux/fcntl.h>
#include <linux/smp_lock.h>
#include <linux/kmod.h>
#endif
+#ifdef __alpha__
+/* for /sbin/loader handling in search_binary_handler() */
+#include <linux/a.out.h>
+#endif
+
int core_uses_pid;
char core_pattern[CORENAME_MAX_SIZE] = "core";
int suid_dumpable = 0;
{
int try,retval;
struct linux_binfmt *fmt;
-#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT)
+#ifdef __alpha__
/* handle /sbin/loader.. */
{
struct exec * eh = (struct exec *) bprm->buf;
}
+static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block,
+ ext4_group_t block_group)
+{
+ ext4_group_t actual_group;
+ ext4_get_group_no_and_offset(sb, block, &actual_group, 0);
+ if (actual_group == block_group)
+ return 1;
+ return 0;
+}
+
+static int ext4_group_used_meta_blocks(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ ext4_fsblk_t tmp;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ /* block bitmap, inode bitmap, and inode table blocks */
+ int used_blocks = sbi->s_itb_per_group + 2;
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ struct ext4_group_desc *gdp;
+ struct buffer_head *bh;
+
+ gdp = ext4_get_group_desc(sb, block_group, &bh);
+ if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!ext4_block_in_group(sb, tmp, block_group))
+ used_blocks -= 1;
+ }
+ }
+ return used_blocks;
+}
/* Initializes an uninitialized block bitmap if given, and returns the
* number of blocks free in the group. */
unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
free_blocks = group_blocks - bit_max;
if (bh) {
- ext4_fsblk_t start;
+ ext4_fsblk_t start, tmp;
+ int flex_bg = 0;
for (bit = 0; bit < bit_max; bit++)
ext4_set_bit(bit, bh->b_data);
start = ext4_group_first_block_no(sb, block_group);
- /* Set bits for block and inode bitmaps, and inode table */
- ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data);
- ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data);
- for (bit = (ext4_inode_table(sb, gdp) - start),
- bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++)
- ext4_set_bit(bit, bh->b_data);
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb,
+ EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ flex_bg = 1;
+ /* Set bits for block and inode bitmaps, and inode table */
+ tmp = ext4_block_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!flex_bg ||
+ ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+ }
/*
* Also if the number of blocks within the group is
* less than the blocksize * 8 ( which is the size
*/
mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data);
}
-
- return free_blocks - sbi->s_itb_per_group - 2;
+ return free_blocks - ext4_group_used_meta_blocks(sb, block_group);
}
sbi = EXT4_SB(sb);
es = sbi->s_es;
- ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
- gdp->bg_free_blocks_count);
err = -EIO;
bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group);
if (!gdp)
goto out_err;
+ ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
+ gdp->bg_free_blocks_count);
+
err = ext4_journal_get_write_access(handle, gdp_bh);
if (err)
goto out_err;
static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa)
{
- unsigned len = ac->ac_o_ex.fe_len;
-
+ unsigned int len = ac->ac_o_ex.fe_len;
ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
&ac->ac_b_ex.fe_group,
&ac->ac_b_ex.fe_start);
}
blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count %
+ EXT4_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
*/
/* Update group descriptor block for new group */
- gdp = (struct ext4_group_desc *)primary->b_data + gdb_off;
+ gdp = (struct ext4_group_desc *)((char *)primary->b_data +
+ gdb_off * EXT4_DESC_SIZE(sb));
ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
unsigned long def_mount_opts;
struct super_block *sb = vfs->mnt_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
+ journal_t *journal = sbi->s_journal;
struct ext4_super_block *es = sbi->s_es;
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
seq_printf(seq, ",commit=%u",
(unsigned) (sbi->s_commit_interval / HZ));
}
- if (test_opt(sb, BARRIER))
- seq_puts(seq, ",barrier=1");
+ /*
+ * We're changing the default of barrier mount option, so
+ * let's always display its mount state so it's clear what its
+ * status is.
+ */
+ seq_puts(seq, ",barrier=");
+ seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
+ if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
+ seq_puts(seq, ",journal_async_commit");
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
if (!test_opt(sb, EXTENTS))
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
set_opt(sbi->s_mount_opt, RESERVATION);
+ set_opt(sbi->s_mount_opt, BARRIER);
/*
* turn on extents feature by default in ext4 filesystem
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3;
+ if (!(sb->s_flags & MS_RDONLY) &&
+ EXT4_SB(sb)->s_journal->j_failed_commit) {
+ printk(KERN_CRIT "EXT4-fs error (device %s): "
+ "ext4_fill_super: Journal transaction "
+ "%u is corrupt\n", sb->s_id,
+ EXT4_SB(sb)->s_journal->j_failed_commit);
+ if (test_opt (sb, ERRORS_RO)) {
+ printk (KERN_CRIT
+ "Mounting filesystem read-only\n");
+ sb->s_flags |= MS_RDONLY;
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ }
+ if (test_opt(sb, ERRORS_PANIC)) {
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ ext4_commit_super(sb, es, 1);
+ printk(KERN_CRIT
+ "EXT4-fs (device %s): mount failed\n",
+ sb->s_id);
+ goto failed_mount4;
+ }
+ }
} else if (journal_inum) {
if (ext4_create_journal(sb, es, journal_inum))
goto failed_mount3;
}
EXPORT_SYMBOL_GPL(fat_getattr);
-static int fat_check_mode(const struct msdos_sb_info *sbi, struct inode *inode,
- mode_t mode)
+static int fat_sanitize_mode(const struct msdos_sb_info *sbi,
+ struct inode *inode, umode_t *mode_ptr)
{
- mode_t mask, req = mode & ~S_IFMT;
+ mode_t mask, perm;
- if (S_ISREG(mode))
+ /*
+ * Note, the basic check is already done by a caller of
+ * (attr->ia_mode & ~MSDOS_VALID_MODE)
+ */
+
+ if (S_ISREG(inode->i_mode))
mask = sbi->options.fs_fmask;
else
mask = sbi->options.fs_dmask;
+ perm = *mode_ptr & ~(S_IFMT | mask);
+
/*
* Of the r and x bits, all (subject to umask) must be present. Of the
* w bits, either all (subject to umask) or none must be present.
*/
- req &= ~mask;
- if ((req & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
+ if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
return -EPERM;
- if ((req & S_IWUGO) && ((req & S_IWUGO) != (S_IWUGO & ~mask)))
+ if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask)))
return -EPERM;
+ *mode_ptr &= S_IFMT | perm;
+
return 0;
}
{
struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb);
struct inode *inode = dentry->d_inode;
- int mask, error = 0;
+ int error = 0;
unsigned int ia_valid;
lock_kernel();
error = 0;
goto out;
}
+
if (((attr->ia_valid & ATTR_UID) &&
(attr->ia_uid != sbi->options.fs_uid)) ||
((attr->ia_valid & ATTR_GID) &&
(attr->ia_gid != sbi->options.fs_gid)) ||
((attr->ia_valid & ATTR_MODE) &&
- fat_check_mode(sbi, inode, attr->ia_mode) < 0))
+ (attr->ia_mode & ~MSDOS_VALID_MODE)))
error = -EPERM;
if (error) {
goto out;
}
- error = inode_setattr(inode, attr);
- if (error)
- goto out;
+ /*
+ * We don't return -EPERM here. Yes, strange, but this is too
+ * old behavior.
+ */
+ if (attr->ia_valid & ATTR_MODE) {
+ if (fat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0)
+ attr->ia_valid &= ~ATTR_MODE;
+ }
- if (S_ISDIR(inode->i_mode))
- mask = sbi->options.fs_dmask;
- else
- mask = sbi->options.fs_fmask;
- inode->i_mode &= S_IFMT | (S_IRWXUGO & ~mask);
+ error = inode_setattr(inode, attr);
out:
unlock_kernel();
return error;
fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages);
fc->minor = arg->minor;
fc->max_write = arg->minor < 5 ? 4096 : arg->max_write;
- fc->max_write = min_t(unsigned, 4096, fc->max_write);
+ fc->max_write = max_t(unsigned, 4096, fc->max_write);
fc->conn_init = 1;
}
fuse_put_request(fc, req);
fc->flags = d.flags;
fc->user_id = d.user_id;
fc->group_id = d.group_id;
- fc->max_read = min_t(unsigned, 4096, d.max_read);
+ fc->max_read = max_t(unsigned, 4096, d.max_read);
/* Used by get_root_inode() */
sb->s_fs_info = fc;
}
-static inline unsigned int zero_metapath_length(const struct metapath *mp,
- unsigned height)
+static inline unsigned int metapath_branch_start(const struct metapath *mp)
{
- unsigned int i;
- for (i = 0; i < height - 1; i++) {
- if (mp->mp_list[i] != 0)
- return i;
- }
- return height;
+ if (mp->mp_list[0] == 0)
+ return 2;
+ return 1;
}
/**
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct buffer_head *dibh = mp->mp_bh[0];
u64 bn, dblock = 0;
- unsigned n, i, blks, alloced = 0, iblks = 0, zmpl = 0;
+ unsigned n, i, blks, alloced = 0, iblks = 0, branch_start = 0;
unsigned dblks = 0;
unsigned ptrs_per_blk;
const unsigned end_of_metadata = height - 1;
/* Building up tree height */
state = ALLOC_GROW_HEIGHT;
iblks = height - ip->i_height;
- zmpl = zero_metapath_length(mp, height);
- iblks -= zmpl;
- iblks += height;
+ branch_start = metapath_branch_start(mp);
+ iblks += (height - branch_start);
}
}
sizeof(struct gfs2_meta_header));
*ptr = zero_bn;
state = ALLOC_GROW_DEPTH;
- for(i = zmpl; i < height; i++) {
+ for(i = branch_start; i < height; i++) {
if (mp->mp_bh[i] == NULL)
break;
brelse(mp->mp_bh[i]);
mp->mp_bh[i] = NULL;
}
- i = zmpl;
+ i = branch_start;
}
if (n == 0)
break;
depending on architecture. I've experimented with several ways
of writing this section such as using an else before the goto
but this one seems to be the fastest. */
- while ((unsigned char *)plong < end - 1) {
+ while ((unsigned char *)plong < end - sizeof(unsigned long)) {
prefetch(plong + 1);
if (((*plong) & LBITMASK) != lskipval)
break;
spin_unlock(&journal->j_state_lock);
/* And try again, without the barrier */
+ lock_buffer(bh);
set_buffer_uptodate(bh);
set_buffer_dirty(bh);
ret = submit_bh(WRITE, bh);
*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
obh->b_size);
}
+ put_bh(obh);
}
return 0;
}
chksum_err = chksum_seen = 0;
if (info->end_transaction) {
- printk(KERN_ERR "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID - 1);
+ journal->j_failed_commit =
+ info->end_transaction;
brelse(bh);
break;
}
if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
- printk(KERN_ERR
- "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID);
+ journal->j_failed_commit =
+ next_commit_ID;
brelse(bh);
break;
}
/* insert into file's list */
fl->fl_next = *pos;
*pos = fl;
-
- if (fl->fl_ops && fl->fl_ops->fl_insert)
- fl->fl_ops->fl_insert(fl);
}
/*
fl->fl_fasync = NULL;
}
- if (fl->fl_ops && fl->fl_ops->fl_remove)
- fl->fl_ops->fl_remove(fl);
-
if (fl->fl_nspid) {
put_pid(fl->fl_nspid);
fl->fl_nspid = NULL;
int result;
/* make sure the stuff we saved doesn't go away */
- dget(save.dentry);
- mntget(save.mnt);
+ path_get(&save);
result = __link_path_walk(name, nd);
if (result == -ESTALE) {
/* nd->path had been dropped */
nd->path = save;
- dget(nd->path.dentry);
- mntget(nd->path.mnt);
+ path_get(&nd->path);
nd->flags |= LOOKUP_REVAL;
result = __link_path_walk(name, nd);
}
nd->flags = flags;
nd->depth = 0;
- nd->path.mnt = mntget(mnt);
- nd->path.dentry = dget(dentry);
+ nd->path.dentry = dentry;
+ nd->path.mnt = mnt;
+ path_get(&nd->path);
retval = path_walk(name, nd);
if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
{
struct nameidata nd;
void *cookie;
+ int res;
nd.depth = 0;
cookie = dentry->d_inode->i_op->follow_link(dentry, &nd);
- if (!IS_ERR(cookie)) {
- int res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
- if (dentry->d_inode->i_op->put_link)
- dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
- cookie = ERR_PTR(res);
- }
- return PTR_ERR(cookie);
+ if (IS_ERR(cookie))
+ return PTR_ERR(cookie);
+
+ res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
+ if (dentry->d_inode->i_op->put_link)
+ dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
+ return res;
}
int vfs_follow_link(struct nameidata *nd, const char *link)
struct mnt_fhstatus *res)
{
struct nfs_fh *fh = res->fh;
+ unsigned size;
if ((res->status = ntohl(*p++)) == 0) {
- int size = ntohl(*p++);
- if (size <= NFS3_FHSIZE) {
+ size = ntohl(*p++);
+ if (size <= NFS3_FHSIZE && size != 0) {
fh->size = size;
memcpy(fh->data, p, size);
} else
{
struct nfs_mount_data *data = (struct nfs_mount_data *)options;
- memset(args, 0, sizeof(*args));
-
if (data == NULL)
goto out_no_data;
case 5:
memset(data->context, 0, sizeof(data->context));
case 6:
- if (data->flags & NFS_MOUNT_VER3)
+ if (data->flags & NFS_MOUNT_VER3) {
+ if (data->root.size > NFS3_FHSIZE || data->root.size == 0)
+ goto out_invalid_fh;
mntfh->size = data->root.size;
- else
+ } else
mntfh->size = NFS2_FHSIZE;
- if (mntfh->size > sizeof(mntfh->data))
- goto out_invalid_fh;
memcpy(mntfh->data, data->root.data, mntfh->size);
if (mntfh->size < sizeof(mntfh->data))
{
struct nfs_server *server = NULL;
struct super_block *s;
- struct nfs_fh mntfh;
- struct nfs_parsed_mount_data data;
+ struct nfs_parsed_mount_data *data;
+ struct nfs_fh *mntfh;
struct dentry *mntroot;
int (*compare_super)(struct super_block *, void *) = nfs_compare_super;
struct nfs_sb_mountdata sb_mntdata = {
.mntflags = flags,
};
- int error;
+ int error = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
+ if (data == NULL || mntfh == NULL)
+ goto out_free_fh;
- security_init_mnt_opts(&data.lsm_opts);
+ security_init_mnt_opts(&data->lsm_opts);
/* Validate the mount data */
- error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name);
+ error = nfs_validate_mount_data(raw_data, data, mntfh, dev_name);
if (error < 0)
goto out;
/* Get a volume representation */
- server = nfs_create_server(&data, &mntfh);
+ server = nfs_create_server(data, mntfh);
if (IS_ERR(server)) {
error = PTR_ERR(server);
goto out;
if (!s->s_root) {
/* initial superblock/root creation */
- nfs_fill_super(s, &data);
+ nfs_fill_super(s, data);
}
- mntroot = nfs_get_root(s, &mntfh);
+ mntroot = nfs_get_root(s, mntfh);
if (IS_ERR(mntroot)) {
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ error = security_sb_set_mnt_opts(s, &data->lsm_opts);
if (error)
goto error_splat_root;
error = 0;
out:
- kfree(data.nfs_server.hostname);
- kfree(data.mount_server.hostname);
- security_free_mnt_opts(&data.lsm_opts);
+ kfree(data->nfs_server.hostname);
+ kfree(data->mount_server.hostname);
+ security_free_mnt_opts(&data->lsm_opts);
+out_free_fh:
+ kfree(mntfh);
+ kfree(data);
return error;
out_err_nosb:
struct nfs4_mount_data *data = (struct nfs4_mount_data *)options;
char *c;
- memset(args, 0, sizeof(*args));
-
if (data == NULL)
goto out_no_data;
static int nfs4_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
{
- struct nfs_parsed_mount_data data;
+ struct nfs_parsed_mount_data *data;
struct super_block *s;
struct nfs_server *server;
- struct nfs_fh mntfh;
+ struct nfs_fh *mntfh;
struct dentry *mntroot;
int (*compare_super)(struct super_block *, void *) = nfs_compare_super;
struct nfs_sb_mountdata sb_mntdata = {
.mntflags = flags,
};
- int error;
+ int error = -ENOMEM;
- security_init_mnt_opts(&data.lsm_opts);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
+ if (data == NULL || mntfh == NULL)
+ goto out_free_fh;
+
+ security_init_mnt_opts(&data->lsm_opts);
/* Validate the mount data */
- error = nfs4_validate_mount_data(raw_data, &data, dev_name);
+ error = nfs4_validate_mount_data(raw_data, data, dev_name);
if (error < 0)
goto out;
/* Get a volume representation */
- server = nfs4_create_server(&data, &mntfh);
+ server = nfs4_create_server(data, mntfh);
if (IS_ERR(server)) {
error = PTR_ERR(server);
goto out;
nfs4_fill_super(s);
}
- mntroot = nfs4_get_root(s, &mntfh);
+ mntroot = nfs4_get_root(s, mntfh);
if (IS_ERR(mntroot)) {
error = PTR_ERR(mntroot);
goto error_splat_super;
}
- error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ error = security_sb_set_mnt_opts(s, &data->lsm_opts);
if (error)
goto error_splat_root;
error = 0;
out:
- kfree(data.client_address);
- kfree(data.nfs_server.export_path);
- kfree(data.nfs_server.hostname);
- security_free_mnt_opts(&data.lsm_opts);
+ kfree(data->client_address);
+ kfree(data->nfs_server.export_path);
+ kfree(data->nfs_server.hostname);
+ security_free_mnt_opts(&data->lsm_opts);
+out_free_fh:
+ kfree(mntfh);
+ kfree(data);
return error;
out_free:
}
status = nfs_writepage_setup(ctx, page, offset, count);
- __set_page_dirty_nobuffers(page);
+ if (status < 0)
+ nfs_set_pageerror(page);
+ else
+ __set_page_dirty_nobuffers(page);
dprintk("NFS: nfs_updatepage returns %d (isize %Ld)\n",
status, (long long)i_size_read(inode));
- if (status < 0)
- nfs_set_pageerror(page);
return status;
}
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/sysctl.h>
#include <linux/configfs.h>
#include "tcp.h"
* cluster references throughout where nodes are looked up */
struct o2nm_cluster *o2nm_single_cluster = NULL;
-#define OCFS2_MAX_HB_CTL_PATH 256
-static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
-
-static ctl_table ocfs2_nm_table[] = {
- {
- .ctl_name = 1,
- .procname = "hb_ctl_path",
- .data = ocfs2_hb_ctl_path,
- .maxlen = OCFS2_MAX_HB_CTL_PATH,
- .mode = 0644,
- .proc_handler = &proc_dostring,
- .strategy = &sysctl_string,
- },
- { .ctl_name = 0 }
-};
-
-static ctl_table ocfs2_mod_table[] = {
- {
- .ctl_name = FS_OCFS2_NM,
- .procname = "nm",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_nm_table
- },
- { .ctl_name = 0}
-};
-
-static ctl_table ocfs2_kern_table[] = {
- {
- .ctl_name = FS_OCFS2,
- .procname = "ocfs2",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_mod_table
- },
- { .ctl_name = 0}
-};
-
-static ctl_table ocfs2_root_table[] = {
- {
- .ctl_name = CTL_FS,
- .procname = "fs",
- .data = NULL,
- .maxlen = 0,
- .mode = 0555,
- .child = ocfs2_kern_table
- },
- { .ctl_name = 0 }
-};
-
-static struct ctl_table_header *ocfs2_table_header = NULL;
-
-const char *o2nm_get_hb_ctl_path(void)
-{
- return ocfs2_hb_ctl_path;
-}
-EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path);
struct o2nm_node *o2nm_get_node_by_num(u8 node_num)
{
static void __exit exit_o2nm(void)
{
- if (ocfs2_table_header)
- unregister_sysctl_table(ocfs2_table_header);
-
/* XXX sync with hb callbacks and shut down hb? */
o2net_unregister_hb_callbacks();
configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys);
if (ret)
goto out;
- ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
- if (!ocfs2_table_header) {
- printk(KERN_ERR "nodemanager: unable to register sysctl\n");
- ret = -ENOMEM; /* or something. */
- goto out_o2net;
- }
-
ret = o2net_register_hb_callbacks();
if (ret)
- goto out_sysctl;
+ goto out_o2net;
config_group_init(&o2nm_cluster_group.cs_subsys.su_group);
mutex_init(&o2nm_cluster_group.cs_subsys.su_mutex);
configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys);
out_callbacks:
o2net_unregister_hb_callbacks();
-out_sysctl:
- unregister_sysctl_table(ocfs2_table_header);
out_o2net:
o2net_exit();
out:
#include <linux/configfs.h>
#include <linux/rbtree.h>
-#define FS_OCFS2_NM 1
-
-const char *o2nm_get_hb_ctl_path(void);
-
struct o2nm_node {
spinlock_t nd_lock;
struct config_item nd_item;
return rc;
}
-static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn,
- int hangup_pending)
+static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn)
{
struct dlm_ctxt *dlm = conn->cc_lockspace;
struct o2dlm_private *priv = conn->cc_private;
return 0;
}
-static void o2hb_stop(const char *group)
-{
- int ret;
- char *argv[5], *envp[3];
-
- argv[0] = (char *)o2nm_get_hb_ctl_path();
- argv[1] = "-K";
- argv[2] = "-u";
- argv[3] = (char *)group;
- argv[4] = NULL;
-
- mlog(0, "Run: %s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]);
-
- /* minimal command environment taken from cpu_run_sbin_hotplug */
- envp[0] = "HOME=/";
- envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
- envp[2] = NULL;
-
- ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
- if (ret < 0)
- mlog_errno(ret);
-}
-
-/*
- * Hangup is a hack for tools compatibility. Older ocfs2-tools software
- * expects the filesystem to call "ocfs2_hb_ctl" during unmount. This
- * happens regardless of whether the DLM got started, so we can't do it
- * in ocfs2_cluster_disconnect(). We bring the o2hb_stop() function into
- * the glue and provide a "hangup" API for super.c to call.
- *
- * Other stacks will eventually provide a NULL ->hangup() pointer.
- */
-static void o2cb_cluster_hangup(const char *group, int grouplen)
-{
- o2hb_stop(group);
-}
-
static int o2cb_cluster_this_node(unsigned int *node)
{
int node_num;
static struct ocfs2_stack_operations o2cb_stack_ops = {
.connect = o2cb_cluster_connect,
.disconnect = o2cb_cluster_disconnect,
- .hangup = o2cb_cluster_hangup,
.this_node = o2cb_cluster_this_node,
.dlm_lock = o2cb_dlm_lock,
.dlm_unlock = o2cb_dlm_unlock,
return rc;
}
-static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn,
- int hangup_pending)
+static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn)
{
dlm_release_lockspace(conn->cc_lockspace, 2);
conn->cc_lockspace = NULL;
#include <linux/fs.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/sysctl.h>
#include "ocfs2_fs.h"
#define OCFS2_STACK_PLUGIN_O2CB "o2cb"
#define OCFS2_STACK_PLUGIN_USER "user"
+#define OCFS2_MAX_HB_CTL_PATH 256
static struct ocfs2_locking_protocol *lproto;
static DEFINE_SPINLOCK(ocfs2_stack_lock);
static LIST_HEAD(ocfs2_stack_list);
static char cluster_stack_name[OCFS2_STACK_LABEL_LEN + 1];
+static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
/*
* The stack currently in use. If not null, active_stack->sp_count > 0,
BUG_ON(conn == NULL);
- ret = active_stack->sp_ops->disconnect(conn, hangup_pending);
+ ret = active_stack->sp_ops->disconnect(conn);
/* XXX Should we free it anyway? */
if (!ret) {
}
EXPORT_SYMBOL_GPL(ocfs2_cluster_disconnect);
+/*
+ * Leave the group for this filesystem. This is executed by a userspace
+ * program (stored in ocfs2_hb_ctl_path).
+ */
+static void ocfs2_leave_group(const char *group)
+{
+ int ret;
+ char *argv[5], *envp[3];
+
+ argv[0] = ocfs2_hb_ctl_path;
+ argv[1] = "-K";
+ argv[2] = "-u";
+ argv[3] = (char *)group;
+ argv[4] = NULL;
+
+ /* minimal command environment taken from cpu_run_sbin_hotplug */
+ envp[0] = "HOME=/";
+ envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+ envp[2] = NULL;
+
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
+ if (ret < 0) {
+ printk(KERN_ERR
+ "ocfs2: Error %d running user helper "
+ "\"%s %s %s %s\"\n",
+ ret, argv[0], argv[1], argv[2], argv[3]);
+ }
+}
+
+/*
+ * Hangup is a required post-umount. ocfs2-tools software expects the
+ * filesystem to call "ocfs2_hb_ctl" during unmount. This happens
+ * regardless of whether the DLM got started, so we can't do it
+ * in ocfs2_cluster_disconnect(). The ocfs2_leave_group() function does
+ * the actual work.
+ */
void ocfs2_cluster_hangup(const char *group, int grouplen)
{
BUG_ON(group == NULL);
BUG_ON(group[grouplen] != '\0');
- if (active_stack->sp_ops->hangup)
- active_stack->sp_ops->hangup(group, grouplen);
+ ocfs2_leave_group(group);
/* cluster_disconnect() was called with hangup_pending==1 */
ocfs2_stack_driver_put();
return ret;
}
+/*
+ * Sysctl bits
+ *
+ * The sysctl lives at /proc/sys/fs/ocfs2/nm/hb_ctl_path. The 'nm' doesn't
+ * make as much sense in a multiple cluster stack world, but it's safer
+ * and easier to preserve the name.
+ */
+
+#define FS_OCFS2_NM 1
+
+static ctl_table ocfs2_nm_table[] = {
+ {
+ .ctl_name = 1,
+ .procname = "hb_ctl_path",
+ .data = ocfs2_hb_ctl_path,
+ .maxlen = OCFS2_MAX_HB_CTL_PATH,
+ .mode = 0644,
+ .proc_handler = &proc_dostring,
+ .strategy = &sysctl_string,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table ocfs2_mod_table[] = {
+ {
+ .ctl_name = FS_OCFS2_NM,
+ .procname = "nm",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_nm_table
+ },
+ { .ctl_name = 0}
+};
+
+static ctl_table ocfs2_kern_table[] = {
+ {
+ .ctl_name = FS_OCFS2,
+ .procname = "ocfs2",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_mod_table
+ },
+ { .ctl_name = 0}
+};
+
+static ctl_table ocfs2_root_table[] = {
+ {
+ .ctl_name = CTL_FS,
+ .procname = "fs",
+ .data = NULL,
+ .maxlen = 0,
+ .mode = 0555,
+ .child = ocfs2_kern_table
+ },
+ { .ctl_name = 0 }
+};
+
+static struct ctl_table_header *ocfs2_table_header = NULL;
+
+
+/*
+ * Initialization
+ */
+
static int __init ocfs2_stack_glue_init(void)
{
strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB);
+ ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
+ if (!ocfs2_table_header) {
+ printk(KERN_ERR
+ "ocfs2 stack glue: unable to register sysctl\n");
+ return -ENOMEM; /* or something. */
+ }
+
return ocfs2_sysfs_init();
}
{
lproto = NULL;
ocfs2_sysfs_exit();
+ if (ocfs2_table_header)
+ unregister_sysctl_table(ocfs2_table_header);
}
MODULE_AUTHOR("Oracle");
* be freed. Thus, a stack must not return from ->disconnect()
* until it will no longer reference the conn pointer.
*
- * If hangup_pending is zero, ocfs2_cluster_disconnect() will also
- * be dropping the reference on the module.
+ * Once this call returns, the stack glue will be dropping this
+ * connection's reference on the module.
*/
- int (*disconnect)(struct ocfs2_cluster_connection *conn,
- int hangup_pending);
-
- /*
- * ocfs2_cluster_hangup() exists for compatibility with older
- * ocfs2 tools. Only the classic stack really needs it. As such
- * ->hangup() is not required of all stacks. See the comment by
- * ocfs2_cluster_hangup() for more details.
- *
- * Note that ocfs2_cluster_hangup() can only be called if
- * hangup_pending was passed to ocfs2_cluster_disconnect().
- */
- void (*hangup)(const char *group, int grouplen);
+ int (*disconnect)(struct ocfs2_cluster_connection *conn);
/*
* ->this_node() returns the cluster's unique identifier for the
/* Used by stack plugins */
int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin);
void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin);
+
#endif /* STACKGLUE_H */
void free_write_pipe(struct file *f)
{
free_pipe_info(f->f_dentry->d_inode);
- dput(f->f_path.dentry);
- mntput(f->f_path.mnt);
+ path_put(&f->f_path);
put_filp(f);
}
return ERR_PTR(-ENFILE);
/* Grab pipe from the writer */
- f->f_path.mnt = mntget(wrf->f_path.mnt);
- f->f_path.dentry = dget(wrf->f_path.dentry);
+ f->f_path = wrf->f_path;
+ path_get(&wrf->f_path);
f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping;
f->f_pos = 0;
err_fdr:
put_unused_fd(fdr);
err_read_pipe:
- dput(fr->f_dentry);
- mntput(fr->f_vfsmnt);
+ path_put(&fr->f_path);
put_filp(fr);
err_write_pipe:
free_write_pipe(fw);
};
static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct mem_size_stats *mss = private;
+ struct mem_size_stats *mss = walk->private;
struct vm_area_struct *vma = mss->vma;
pte_t *pte, ptent;
spinlock_t *ptl;
return 0;
}
-static struct mm_walk smaps_walk = { .pmd_entry = smaps_pte_range };
-
static int show_smap(struct seq_file *m, void *v)
{
struct vm_area_struct *vma = v;
struct mem_size_stats mss;
int ret;
+ struct mm_walk smaps_walk = {
+ .pmd_entry = smaps_pte_range,
+ .mm = vma->vm_mm,
+ .private = &mss,
+ };
memset(&mss, 0, sizeof mss);
mss.vma = vma;
if (vma->vm_mm && !is_vm_hugetlb_page(vma))
- walk_page_range(vma->vm_mm, vma->vm_start, vma->vm_end,
- &smaps_walk, &mss);
+ walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk);
ret = show_map(m, v);
if (ret)
};
static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr,
- unsigned long end, void *private)
+ unsigned long end, struct mm_walk *walk)
{
- struct vm_area_struct *vma = private;
+ struct vm_area_struct *vma = walk->private;
pte_t *pte, ptent;
spinlock_t *ptl;
struct page *page;
return 0;
}
-static struct mm_walk clear_refs_walk = { .pmd_entry = clear_refs_pte_range };
-
static ssize_t clear_refs_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
return -ESRCH;
mm = get_task_mm(task);
if (mm) {
+ static struct mm_walk clear_refs_walk;
+ memset(&clear_refs_walk, 0, sizeof(clear_refs_walk));
+ clear_refs_walk.pmd_entry = clear_refs_pte_range;
+ clear_refs_walk.mm = mm;
down_read(&mm->mmap_sem);
- for (vma = mm->mmap; vma; vma = vma->vm_next)
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ clear_refs_walk.private = vma;
if (!is_vm_hugetlb_page(vma))
- walk_page_range(mm, vma->vm_start, vma->vm_end,
- &clear_refs_walk, vma);
+ walk_page_range(vma->vm_start, vma->vm_end,
+ &clear_refs_walk);
+ }
flush_tlb_mm(mm);
up_read(&mm->mmap_sem);
mmput(mm);
}
static int pagemap_pte_hole(unsigned long start, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct pagemapread *pm = private;
+ struct pagemapread *pm = walk->private;
unsigned long addr;
int err = 0;
for (addr = start; addr < end; addr += PAGE_SIZE) {
return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
}
+static unsigned long pte_to_pagemap_entry(pte_t pte)
+{
+ unsigned long pme = 0;
+ if (is_swap_pte(pte))
+ pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
+ else if (pte_present(pte))
+ pme = PM_PFRAME(pte_pfn(pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
+ return pme;
+}
+
static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct pagemapread *pm = private;
+ struct vm_area_struct *vma;
+ struct pagemapread *pm = walk->private;
pte_t *pte;
int err = 0;
+ /* find the first VMA at or above 'addr' */
+ vma = find_vma(walk->mm, addr);
for (; addr != end; addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
- pte = pte_offset_map(pmd, addr);
- if (is_swap_pte(*pte))
- pfn = PM_PFRAME(swap_pte_to_pagemap_entry(*pte))
- | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
- else if (pte_present(*pte))
- pfn = PM_PFRAME(pte_pfn(*pte))
- | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
- /* unmap so we're not in atomic when we copy to userspace */
- pte_unmap(pte);
+
+ /* check to see if we've left 'vma' behind
+ * and need a new, higher one */
+ if (vma && (addr >= vma->vm_end))
+ vma = find_vma(walk->mm, addr);
+
+ /* check that 'vma' actually covers this address,
+ * and that it isn't a huge page vma */
+ if (vma && (vma->vm_start <= addr) &&
+ !is_vm_hugetlb_page(vma)) {
+ pte = pte_offset_map(pmd, addr);
+ pfn = pte_to_pagemap_entry(*pte);
+ /* unmap before userspace copy */
+ pte_unmap(pte);
+ }
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
* user buffer is tracked in "pm", and the walk
* will stop when we hit the end of the buffer.
*/
- ret = walk_page_range(mm, start_vaddr, end_vaddr,
- &pagemap_walk, &pm);
+ ret = walk_page_range(start_vaddr, end_vaddr,
+ &pagemap_walk);
if (ret == PM_END_OF_BUFFER)
ret = 0;
/* don't need mmap_sem for these, but this looks cleaner */
retval++;
}
}
- cond_resched();
}
if (res_in)
*rinp = res_in;
*routp = res_out;
if (res_ex)
*rexp = res_ex;
+ cond_resched();
}
wait = NULL;
if (retval || !*timeout || signal_pending(current))
/*
* Check whether there is an anchor block in the given block
*/
-static int udf_check_anchor_block(struct super_block *sb, sector_t block,
- bool varconv)
+static int udf_check_anchor_block(struct super_block *sb, sector_t block)
{
- struct buffer_head *bh = NULL;
- tag *t;
+ struct buffer_head *bh;
uint16_t ident;
- uint32_t location;
- if (varconv) {
- if (udf_fixed_to_variable(block) >=
- sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits)
- return 0;
- bh = sb_bread(sb, udf_fixed_to_variable(block));
- }
- else
- bh = sb_bread(sb, block);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_VARCONV) &&
+ udf_fixed_to_variable(block) >=
+ sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits)
+ return 0;
+ bh = udf_read_tagged(sb, block, block, &ident);
if (!bh)
return 0;
-
- t = (tag *)bh->b_data;
- ident = le16_to_cpu(t->tagIdent);
- location = le32_to_cpu(t->tagLocation);
brelse(bh);
- if (ident != TAG_IDENT_AVDP)
- return 0;
- return location == block;
+
+ return ident == TAG_IDENT_AVDP;
}
/* Search for an anchor volume descriptor pointer */
-static sector_t udf_scan_anchors(struct super_block *sb, bool varconv,
- sector_t lastblock)
+static sector_t udf_scan_anchors(struct super_block *sb, sector_t lastblock)
{
sector_t last[6];
int i;
sb->s_blocksize_bits)
continue;
- if (udf_check_anchor_block(sb, last[i], varconv)) {
+ if (udf_check_anchor_block(sb, last[i])) {
sbi->s_anchor[0] = last[i];
sbi->s_anchor[1] = last[i] - 256;
return last[i];
if (last[i] < 256)
continue;
- if (udf_check_anchor_block(sb, last[i] - 256, varconv)) {
+ if (udf_check_anchor_block(sb, last[i] - 256)) {
sbi->s_anchor[1] = last[i] - 256;
return last[i];
}
}
- if (udf_check_anchor_block(sb, sbi->s_session + 256, varconv)) {
+ if (udf_check_anchor_block(sb, sbi->s_session + 256)) {
sbi->s_anchor[0] = sbi->s_session + 256;
return last[0];
}
- if (udf_check_anchor_block(sb, sbi->s_session + 512, varconv)) {
+ if (udf_check_anchor_block(sb, sbi->s_session + 512)) {
sbi->s_anchor[0] = sbi->s_session + 512;
return last[0];
}
int i;
struct udf_sb_info *sbi = UDF_SB(sb);
- lastblock = udf_scan_anchors(sb, 0, sbi->s_last_block);
+ lastblock = udf_scan_anchors(sb, sbi->s_last_block);
if (lastblock)
goto check_anchor;
/* No anchor found? Try VARCONV conversion of block numbers */
+ UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
/* Firstly, we try to not convert number of the last block */
- lastblock = udf_scan_anchors(sb, 1,
+ lastblock = udf_scan_anchors(sb,
udf_variable_to_fixed(sbi->s_last_block));
- if (lastblock) {
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ if (lastblock)
goto check_anchor;
- }
/* Secondly, we try with converted number of the last block */
- lastblock = udf_scan_anchors(sb, 1, sbi->s_last_block);
- if (lastblock)
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ lastblock = udf_scan_anchors(sb, sbi->s_last_block);
+ if (!lastblock) {
+ /* VARCONV didn't help. Clear it. */
+ UDF_CLEAR_FLAG(sb, UDF_FLAG_VARCONV);
+ }
check_anchor:
/*
#define UDF_PREALLOCATE
#define UDF_DEFAULT_PREALLOC_BLOCKS 8
-#define UDFFS_DEBUG
+#undef UDFFS_DEBUG
#ifdef UDFFS_DEBUG
#define udf_debug(f, a...) \
#endif
-static bool nsec_special(long nsec)
-{
- return nsec == UTIME_OMIT || nsec == UTIME_NOW;
-}
-
static bool nsec_valid(long nsec)
{
- if (nsec_special(nsec))
+ if (nsec == UTIME_OMIT || nsec == UTIME_NOW)
return true;
return nsec >= 0 && nsec <= 999999999;
if (error)
goto dput_and_out;
- /* Don't worry, the checks are done in inode_change_ok() */
+ if (times && times[0].tv_nsec == UTIME_NOW &&
+ times[1].tv_nsec == UTIME_NOW)
+ times = NULL;
+
+ /* In most cases, the checks are done in inode_change_ok() */
newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME;
if (times) {
error = -EPERM;
newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
newattrs.ia_valid |= ATTR_MTIME_SET;
}
- }
- /*
- * If times is NULL or both times are either UTIME_OMIT or
- * UTIME_NOW, then need to check permissions, because
- * inode_change_ok() won't do it.
- */
- if (!times || (nsec_special(times[0].tv_nsec) &&
- nsec_special(times[1].tv_nsec))) {
+ /*
+ * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT
+ * cases, we need to make an extra check that is not done by
+ * inode_change_ok().
+ */
+ if (((times[0].tv_nsec == UTIME_NOW &&
+ times[1].tv_nsec == UTIME_OMIT)
+ ||
+ (times[0].tv_nsec == UTIME_OMIT &&
+ times[1].tv_nsec == UTIME_NOW))
+ && !is_owner_or_cap(inode))
+ goto mnt_drop_write_and_out;
+ } else {
+
+ /*
+ * If times is NULL (or both times are UTIME_NOW),
+ * then we need to check permissions, because
+ * inode_change_ok() won't do it.
+ */
error = -EACCES;
if (IS_IMMUTABLE(inode))
goto mnt_drop_write_and_out;
if (!is_owner_or_cap(inode)) {
- if (f) {
- if (!(f->f_mode & FMODE_WRITE))
- goto mnt_drop_write_and_out;
- } else {
- error = vfs_permission(&nd, MAY_WRITE);
- if (error)
- goto mnt_drop_write_and_out;
- }
+ error = permission(inode, MAY_WRITE, NULL);
+ if (error)
+ goto mnt_drop_write_and_out;
}
}
mutex_lock(&inode->i_mutex);
if (utimes) {
if (copy_from_user(&tstimes, utimes, sizeof(tstimes)))
return -EFAULT;
- if ((tstimes[0].tv_nsec == UTIME_OMIT ||
- tstimes[0].tv_nsec == UTIME_NOW) &&
- tstimes[0].tv_sec != 0)
- return -EINVAL;
- if ((tstimes[1].tv_nsec == UTIME_OMIT ||
- tstimes[1].tv_nsec == UTIME_NOW) &&
- tstimes[1].tv_sec != 0)
- return -EINVAL;
/* Nothing to do, we must not even check the path. */
if (tstimes[0].tv_nsec == UTIME_OMIT &&
#endif /* CONFIG_CPU_FREQ */
/* in processor_throttling.c */
+int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
extern struct file_operations acpi_processor_throttling_fops;
}
#endif
-static inline int __mcpcia_is_mmio(unsigned long addr)
+extern inline int __mcpcia_is_mmio(unsigned long addr)
{
return (addr & 0x80000000UL) == 0;
}
#define vip volatile int *
#define vuip volatile unsigned int *
-static inline u8 t2_inb(unsigned long addr)
+extern inline u8 t2_inb(unsigned long addr)
{
long result = *(vip) ((addr << 5) + T2_IO + 0x00);
return __kernel_extbl(result, addr & 3);
}
-static inline void t2_outb(u8 b, unsigned long addr)
+extern inline void t2_outb(u8 b, unsigned long addr)
{
unsigned long w;
mb();
}
-static inline u16 t2_inw(unsigned long addr)
+extern inline u16 t2_inw(unsigned long addr)
{
long result = *(vip) ((addr << 5) + T2_IO + 0x08);
return __kernel_extwl(result, addr & 3);
}
-static inline void t2_outw(u16 b, unsigned long addr)
+extern inline void t2_outw(u16 b, unsigned long addr)
{
unsigned long w;
mb();
}
-static inline u32 t2_inl(unsigned long addr)
+extern inline u32 t2_inl(unsigned long addr)
{
return *(vuip) ((addr << 5) + T2_IO + 0x18);
}
-static inline void t2_outl(u32 b, unsigned long addr)
+extern inline void t2_outl(u32 b, unsigned long addr)
{
*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
mb();
set_hae(msb); \
}
-static DEFINE_SPINLOCK(t2_hae_lock);
+extern spinlock_t t2_hae_lock;
/*
* NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
* register not being up-to-date with respect to the hardware
* value.
*/
-static inline void __set_hae(unsigned long new_hae)
+extern inline void __set_hae(unsigned long new_hae)
{
unsigned long flags;
local_irq_save(flags);
local_irq_restore(flags);
}
-static inline void set_hae(unsigned long new_hae)
+extern inline void set_hae(unsigned long new_hae)
{
if (new_hae != alpha_mv.hae_cache)
__set_hae(new_hae);
#undef REMAP1
#undef REMAP2
-static inline void __iomem *generic_ioportmap(unsigned long a)
+extern inline void __iomem *generic_ioportmap(unsigned long a)
{
return alpha_mv.mv_ioportmap(a);
}
#endif
-extern inline unsigned long
+static inline unsigned long
__reload_thread(struct pcb_struct *pcb)
{
register unsigned long a0 __asm__("$16");
#define __MMU_EXTERN_INLINE
#endif
-static inline unsigned long
+extern inline unsigned long
__get_new_mm_context(struct mm_struct *mm, long cpu)
{
unsigned long asn = cpu_last_asn(cpu);
# endif
#endif
-extern inline int
+static inline int
init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
int i;
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
+#include <linux/compiler.h>
+#include <linux/threads.h>
-#include <asm-generic/percpu.h>
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+#ifdef CONFIG_SMP
+
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ */
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#ifdef CONFIG_DEBUG_PREEMPT
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+#ifndef MODULE
+#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
+#define PER_CPU_ATTRIBUTES
+#else
+/*
+ * To calculate addresses of locally defined variables, GCC uses 32-bit
+ * displacement from the GP. Which doesn't work for per cpu variables in
+ * modules, as an offset to the kernel per cpu area is way above 4G.
+ *
+ * This forces allocation of a GOT entry for per cpu variable using
+ * ldq instruction with a 'literal' relocation.
+ */
+#define SHIFT_PERCPU_PTR(var, offset) ({ \
+ extern int simple_identifier_##var(void); \
+ unsigned long __ptr, tmp_gp; \
+ asm ( "br %1, 1f \n\
+ 1: ldgp %1, 0(%1) \n\
+ ldq %0, per_cpu__" #var"(%1)\t!literal" \
+ : "=&r"(__ptr), "=&r"(tmp_gp)); \
+ (typeof(&per_cpu_var(var)))(__ptr + (offset)); })
+
+#define PER_CPU_ATTRIBUTES __used
+
+#endif /* MODULE */
+
+/*
+ * A percpu variable may point to a discarded regions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) \
+ (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
+#define __get_cpu_var(var) \
+ (*SHIFT_PERCPU_PTR(var, my_cpu_offset))
+#define __raw_get_cpu_var(var) \
+ (*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var) per_cpu_var(var)
+#define __raw_get_cpu_var(var) per_cpu_var(var)
+
+#define PER_CPU_ATTRIBUTES
+
+#endif /* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
#endif /* __ALPHA_PERCPU_H */
__amask; })
#define __CALL_PAL_R0(NAME, TYPE) \
-static inline TYPE NAME(void) \
+extern inline TYPE NAME(void) \
{ \
register TYPE __r0 __asm__("$0"); \
__asm__ __volatile__( \
}
#define __CALL_PAL_W1(NAME, TYPE0) \
-static inline void NAME(TYPE0 arg0) \
+extern inline void NAME(TYPE0 arg0) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
__asm__ __volatile__( \
}
#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \
-static inline void NAME(TYPE0 arg0, TYPE1 arg1) \
+extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
register TYPE1 __r17 __asm__("$17") = arg1; \
}
#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \
-static inline RTYPE NAME(TYPE0 arg0) \
+extern inline RTYPE NAME(TYPE0 arg0) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
}
#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \
-static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
+extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
#define VT_BUF_HAVE_MEMSETW
#define VT_BUF_HAVE_MEMCPYW
-extern inline void scr_writew(u16 val, volatile u16 *addr)
+static inline void scr_writew(u16 val, volatile u16 *addr)
{
if (__is_ioaddr(addr))
__raw_writew(val, (volatile u16 __iomem *) addr);
*addr = val;
}
-extern inline u16 scr_readw(volatile const u16 *addr)
+static inline u16 scr_readw(volatile const u16 *addr)
{
if (__is_ioaddr(addr))
return __raw_readw((volatile const u16 __iomem *) addr);
return *addr;
}
-extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
{
if (__is_ioaddr(s))
memsetw_io((u16 __iomem *) s, c, count);
#ifndef __ASM_ARCH_REGS_LCD_H
#define __ASM_ARCH_REGS_LCD_H
+
+#include <asm/arch/bitfield.h>
+
/*
* LCD Controller Registers and Bits Definitions
*/
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
-#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct tx_dma_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
#ifdef CONFIG_BFIN_UART1_CTSRTS
peripheral_request(P_UART1_RTS, DRIVER_NAME);
- peripheral_request(P_UART1_CTS DRIVER_NAME);
+ peripheral_request(P_UART1_CTS, DRIVER_NAME);
#endif
#endif
#ifdef CONFIG_BFIN_UART3_CTSRTS
peripheral_request(P_UART3_RTS, DRIVER_NAME);
- peripheral_request(P_UART3_CTS DRIVER_NAME);
+ peripheral_request(P_UART3_CTS, DRIVER_NAME);
#endif
#endif
SSYNC();
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct work_struct cts_workqueue;
+ struct timer_list cts_timer;
int cts_pin;
int rts_pin;
#endif
header-y += kvm.h
-ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += auxvec.h
#ifndef _ASM_IA64_SN_SIMULATOR_H
#define _ASM_IA64_SN_SIMULATOR_H
-
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
#define SNMAGIC 0xaeeeeeee8badbeefL
#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type)
#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2)
extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
+#else
+#define IS_MEDUSA() 0
+#define SIMULATOR_SLEEP()
+#define IS_RUNNING_ON_SIMULATOR() 0
+#endif
#endif /* _ASM_IA64_SN_SIMULATOR_H */
res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
return (p - addr) * 32 + res;
}
-#define ext2_find_next_bit(addr, size, off) \
- generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+
+static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
+{
+ const unsigned long *p = vaddr, *addr = vaddr;
+ int res;
+
+ if (!size)
+ return 0;
+
+ size = (size >> 5) + ((size & 31) > 0);
+ while (*p++ == 0UL) {
+ if (--size == 0)
+ return (p - addr) << 5;
+ }
+
+ --p;
+ for (res = 0; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ break;
+ return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
+ unsigned offset)
+{
+ const unsigned long *addr = vaddr;
+ const unsigned long *p = addr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ /* Look for one in first longword */
+ for (res = bit; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ return (p - addr) * 32 + res;
+ p++;
+ }
+ /* No set bit yet, search remaining full bytes for a set bit */
+ res = ext2_find_first_bit(p, size - 32 * (p - addr));
+ return (p - addr) * 32 + res;
+}
#endif /* __KERNEL__ */
struct cache_desc tcache; /* Tertiary/split secondary cache */
int srsets; /* Shadow register sets */
int core; /* physical core number */
-#if defined(CONFIG_MIPS_MT_SMTC)
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
/*
* In the MIPS MT "SMTC" model, each TC is considered
* to be a "CPU" for the purposes of scheduling, but
* to all TCs within the same VPE.
*/
int vpe_id; /* Virtual Processor number */
-#endif /* CONFIG_MIPS_MT */
+#endif
#ifdef CONFIG_MIPS_MT_SMTC
int tc_id; /* Thread Context number */
#endif
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
-#define REG(base, offs) REG32((unsigned int)(base) + offs##_##OFS)
-#define REGP(base, phys) REG32((unsigned int)(base) + (phys))
+#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS)
+#define REGP(base, phys) REG32((unsigned long)(base) + (phys))
/* Accessors */
#define GIC_REG(segment, offset) \
#define LASAT_BASE_BAUD_100 (7372800 / 16)
#define LASAT_UART_REGS_BASE_100 0x1c8b0000
#define LASAT_UART_REGS_SHIFT_100 2
-#define LASATINT_UART_100 8
+#define LASATINT_UART_100 16
/* * LASAT 200 boards serial configuration */
#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
#define LASAT_UART_REGS_SHIFT_200 3
-#define LASATINT_UART_200 13
+#define LASATINT_UART_200 21
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1500_PCI_ERR_INT,
+ AU1500_RESERVED_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
-#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT)
-
#endif /* _ASM_PGTABLE_BITS_H */
"2:\n"
: "=r" (sum), "=r" (iph), "=r" (ihl)
: "1" (iph), "2" (ihl)
- : "r19", "r20", "r21" );
+ : "r19", "r20", "r21", "memory");
return (__force __sum16)sum;
}
include include/asm-generic/Kbuild.asm
-header-y += a.out.h
header-y += auxvec.h
header-y += ioctls.h
header-y += mman.h
extern int kvmppc_emulate_instruction(struct kvm_run *run,
struct kvm_vcpu *vcpu);
+extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
u64 asid, u32 flags);
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
-int check_media_bay(struct device_node *which_bay, int what);
-
/* Number of bays in the machine or 0 */
extern int media_bay_count;
/* called by IDE PMAC host driver to register IDE controller for media bay */
int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
int irq, ide_hwif_t *hwif);
+
+int check_media_bay(struct device_node *which_bay, int what);
+
+#else
+
+static inline int check_media_bay(struct device_node *which_bay, int what)
+{
+ return -ENODEV;
+}
+
#endif
#endif /* __KERNEL__ */
u64 flags;
u64 class_0_pending;
u64 class_0_dar;
- u64 class_0_dsisr;
u64 class_1_dar;
u64 class_1_dsisr;
size_t ls_size;
u64 spu_chnldata_RW[32];
u32 spu_mailbox_data[4];
u32 pu_mailbox_data[1];
- u64 class_0_dar, class_0_dsisr, class_0_pending;
+ u64 class_0_dar, class_0_pending;
u64 class_1_dar, class_1_dsisr;
unsigned long suspend_time;
spinlock_t register_lock;
* SMP since it is only used to order updates to system memory.
*/
#define mb() __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb() __asm__ __volatile__ (__stringify(LWSYNC) : : : "memory")
+#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
#define wmb() __asm__ __volatile__ ("sync" : : : "memory")
#define read_barrier_depends() do { } while(0)
asm volatile( \
" lctlg %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
- "m" (*(addrtype *)(array))); \
+ "m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctg %2,%3,0(%1)\n" \
- : "=m" (*(addrtype *)(array)) \
+ : "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
asm volatile( \
" lctl %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
- "m" (*(addrtype *)(array))); \
+ "m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctl %2,%3,0(%1)\n" \
- : "=m" (*(addrtype *)(array)) \
+ : "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
#define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
#define VSA_VR_SIGNATURE 0x0003
#define VSA_VR_MEM_SIZE 0x0200
-#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
-
+#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG 0x534d /* General Software signature */
/* GPIO */
#define GPIO_OUTPUT_VAL 0x00
#include <linux/kvm_para.h>
#include <linux/kvm_types.h>
+#include <asm/pvclock-abi.h>
#include <asm/desc.h>
#define KVM_MAX_VCPUS 16
struct x86_emulate_ctxt emulate_ctxt;
gpa_t time;
- struct kvm_vcpu_time_info hv_clock;
+ struct pvclock_vcpu_time_info hv_clock;
+ unsigned int hv_clock_tsc_khz;
unsigned int time_offset;
struct page *time_page;
};
#ifdef __KERNEL__
#include <asm/processor.h>
-/* xen binary-compatible interface. See xen headers for details */
-struct kvm_vcpu_time_info {
- uint32_t version;
- uint32_t pad0;
- uint64_t tsc_timestamp;
- uint64_t system_time;
- uint32_t tsc_to_system_mul;
- int8_t tsc_shift;
- int8_t pad[3];
-} __attribute__((__packed__)); /* 32 bytes */
-
-struct kvm_wall_clock {
- uint32_t wc_version;
- uint32_t wc_sec;
- uint32_t wc_nsec;
-} __attribute__((__packed__));
-
-
extern void kvmclock_init(void);
#define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
#ifdef CONFIG_X86_PAE
-#define __PHYSICAL_MASK_SHIFT 36
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT 44
#define __VIRTUAL_MASK_SHIFT 32
#define PAGETABLE_LEVELS 3
--- /dev/null
+#ifndef _ASM_X86_PVCLOCK_ABI_H_
+#define _ASM_X86_PVCLOCK_ABI_H_
+#ifndef __ASSEMBLY__
+
+/*
+ * These structs MUST NOT be changed.
+ * They are the ABI between hypervisor and guest OS.
+ * Both Xen and KVM are using this.
+ *
+ * pvclock_vcpu_time_info holds the system time and the tsc timestamp
+ * of the last update. So the guest can use the tsc delta to get a
+ * more precise system time. There is one per virtual cpu.
+ *
+ * pvclock_wall_clock references the point in time when the system
+ * time was zero (usually boot time), thus the guest calculates the
+ * current wall clock by adding the system time.
+ *
+ * Protocol for the "version" fields is: hypervisor raises it (making
+ * it uneven) before it starts updating the fields and raises it again
+ * (making it even) when it is done. Thus the guest can make sure the
+ * time values it got are consistent by checking the version before
+ * and after reading them.
+ */
+
+struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 pad[3];
+} __attribute__((__packed__)); /* 32 bytes */
+
+struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+} __attribute__((__packed__));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_PVCLOCK_ABI_H_ */
--- /dev/null
+#ifndef _ASM_X86_PVCLOCK_H_
+#define _ASM_X86_PVCLOCK_H_
+
+#include <linux/clocksource.h>
+#include <asm/pvclock-abi.h>
+
+/* some helper functions for xen and kvm pv clock sources */
+cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
+void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
+ struct pvclock_vcpu_time_info *vcpu,
+ struct timespec *ts);
+
+#endif /* _ASM_X86_PVCLOCK_H_ */
return (pte_t) { .pte = x };
}
-#ifdef CONFIG_X86_PAE
#define pmd_val_ma(v) ((v).pmd)
#define pud_val_ma(v) ((v).pgd.pgd)
#define __pmd_ma(x) ((pmd_t) { (x) } )
-#else /* !X86_PAE */
-#define pmd_val_ma(v) ((v).pud.pgd.pgd)
-#endif /* CONFIG_X86_PAE */
#define pgd_val_ma(x) ((x).pgd)
unifdef-y += adb.h
unifdef-y += adfs_fs.h
unifdef-y += agpgart.h
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+unifdef-y += a.out.h
+endif
unifdef-y += apm_bios.h
unifdef-y += atalk.h
unifdef-y += atmdev.h
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
-#ifdef CONFIG_ARCH_SUPPORTS_AOUT
-
#define __GNU_EXEC_MACROS__
#ifndef __STRUCT_EXEC_OVERRIDE__
#endif /* no N_RELOCATION_INFO_DECLARED. */
#endif /*__ASSEMBLY__ */
-#else /* CONFIG_ARCH_SUPPORTS_AOUT */
-#ifndef __ASSEMBLY__
-struct exec {
-};
-#endif
-#endif /* CONFIG_ARCH_SUPPORTS_AOUT */
#endif /* __A_OUT_GNU_H__ */
#ifndef _AGP_BACKEND_H
#define _AGP_BACKEND_H 1
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
enum chipset_type {
NOT_SUPPORTED,
SUPPORTED,
size_t aper_size;
int max_memory; /* In pages */
int current_memory;
- int cant_use_aperture;
+ bool cant_use_aperture;
unsigned long page_mask;
struct vm_operations_struct *vm_ops;
};
off_t pg_start;
u32 type;
u32 physical;
- u8 is_bound;
- u8 is_flushed;
- u8 vmalloc_flag;
+ bool is_bound;
+ bool is_flushed;
+ bool vmalloc_flag;
};
#define AGP_NORMAL_MEMORY 0
struct agp_controller *current_controller;
struct agp_controller *controllers;
struct agp_file_private *file_priv_list;
- u8 used_by_controller;
- u8 backend_acquired;
+ bool used_by_controller;
+ bool backend_acquired;
};
#endif /* __KERNEL__ */
extern int audit_update_lsm_rules(void);
/* Private API (for audit.c only) */
-extern int audit_filter_user(struct netlink_skb_parms *cb, int type);
+extern int audit_filter_user(struct netlink_skb_parms *cb);
extern int audit_filter_type(int type);
extern int audit_receive_filter(int type, int pid, int uid, int seq,
void *data, size_t datasz, uid_t loginuid,
unsigned long freepfn,
unsigned long startpfn,
unsigned long endpfn);
-extern void reserve_bootmem_node(pg_data_t *pgdat,
+extern int reserve_bootmem_node(pg_data_t *pgdat,
unsigned long physaddr,
unsigned long size,
int flags);
};
struct cpuidle_device {
+ unsigned int registered:1;
unsigned int enabled:1;
unsigned int cpu;
extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
extern char *__d_path(const struct path *path, struct path *root, char *, int);
-extern char *d_path(struct path *, char *, int);
+extern char *d_path(const struct path *, char *, int);
extern char *dentry_path(struct dentry *, char *, int);
/* Allocation counts.. */
typedef struct files_struct *fl_owner_t;
struct file_lock_operations {
- void (*fl_insert)(struct file_lock *); /* lock insertion callback */
- void (*fl_remove)(struct file_lock *); /* lock removal callback */
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
};
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
- ide_pmac, ide_etrax100, ide_acorn,
+ ide_pmac, ide_acorn,
ide_au1xxx, ide_palm3710
};
__u16 __reserved;
__u32 datalen;
__u32 __reserved2;
- void __user *data;
+ /* data follows */
};
/* PRL flags */
#define IORESOURCE_AUTO 0x40000000
#define IORESOURCE_BUSY 0x80000000 /* Driver has marked this resource busy */
-/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */
+/* PnP IRQ specific bits (IORESOURCE_BITS) */
#define IORESOURCE_IRQ_HIGHEDGE (1<<0)
#define IORESOURCE_IRQ_LOWEDGE (1<<1)
#define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
#define IORESOURCE_IRQ_LOWLEVEL (1<<3)
#define IORESOURCE_IRQ_SHAREABLE (1<<4)
-/* ISA PnP DMA specific bits (IORESOURCE_BITS) */
+/* PnP DMA specific bits (IORESOURCE_BITS) */
#define IORESOURCE_DMA_TYPE_MASK (3<<0)
#define IORESOURCE_DMA_8BIT (0<<0)
#define IORESOURCE_DMA_8AND16BIT (1<<0)
#define IORESOURCE_DMA_TYPEB (2<<6)
#define IORESOURCE_DMA_TYPEF (3<<6)
-/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */
+/* PnP memory I/O specific bits (IORESOURCE_BITS) */
#define IORESOURCE_MEM_WRITEABLE (1<<0) /* dup: IORESOURCE_READONLY */
#define IORESOURCE_MEM_CACHEABLE (1<<1) /* dup: IORESOURCE_CACHEABLE */
#define IORESOURCE_MEM_RANGELENGTH (1<<2) /* dup: IORESOURCE_RANGELENGTH */
{
struct request_sock *req = reqsk_alloc(ops);
- if (req != NULL)
+ if (req != NULL) {
inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req);
+ inet6_rsk(req)->pktopts = NULL;
+ }
return req;
}
struct proc_dir_entry *j_proc_entry;
struct transaction_stats_s j_stats;
+ /* Failed journal commit ID */
+ unsigned int j_failed_commit;
+
/*
* An opaque pointer to fs-private information. ext3 puts its
* superblock pointer here
#define KVM_REQ_REPORT_TPR_ACCESS 2
#define KVM_REQ_MMU_RELOAD 3
#define KVM_REQ_TRIPLE_FAULT 4
+#define KVM_REQ_PENDING_TIMER 5
struct kvm_vcpu;
extern struct kmem_cache *kvm_vcpu_cache;
return (gpa_t)gfn << PAGE_SHIFT;
}
-static inline void kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
+static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests);
}
}
#endif
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
+
+static __always_inline u32
+__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ u32 ret = 0;
+
+ while (dividend >= divisor) {
+ /* The following asm() prevents the compiler from
+ optimising this loop into a modulo operation. */
+ asm("" : "+rm"(dividend));
+
+ dividend -= divisor;
+ ret++;
+ }
+
+ *remainder = dividend;
+
+ return ret;
+}
+
#endif /* _LINUX_MATH64_H */
* (see walk_page_range for more details)
*/
struct mm_walk {
- int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, void *);
- int (*pud_entry)(pud_t *, unsigned long, unsigned long, void *);
- int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, void *);
- int (*pte_entry)(pte_t *, unsigned long, unsigned long, void *);
- int (*pte_hole)(unsigned long, unsigned long, void *);
+ int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *);
+ struct mm_struct *mm;
+ void *private;
};
-int walk_page_range(const struct mm_struct *, unsigned long addr,
- unsigned long end, const struct mm_walk *walk,
- void *private);
+int walk_page_range(unsigned long addr, unsigned long end,
+ struct mm_walk *walk);
void free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
unsigned long end, unsigned long floor, unsigned long ceiling);
void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma,
#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
-/* media of boot sector */
-static inline int fat_valid_media(u8 media)
-{
- return 0xf8 <= media || media == 0xf0;
-}
-
#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
#endif
}
+/* media of boot sector */
+static inline int fat_valid_media(u8 media)
+{
+ return 0xf8 <= media || media == 0xf0;
+}
+
/* fat/cache.c */
extern void fat_cache_inval_inode(struct inode *inode);
extern int fat_get_cluster(struct inode *inode, int cluster,
}
#endif /* !PAGEFLAGS_EXTENDED */
+
+#define PAGE_FLAGS (1 << PG_lru | 1 << PG_private | 1 << PG_locked | \
+ 1 << PG_buddy | 1 << PG_writeback | \
+ 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active)
+
+/*
+ * Flags checked in bad_page(). Pages on the free list should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty)
+
+/*
+ * Flags checked when a page is freed. Pages being freed should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved)
+
+/*
+ * Flags checked when a page is prepped for return by the page allocator.
+ * Pages being prepped should not have these flags set. It they are, there
+ * is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty)
+
#endif /* !__GENERATING_BOUNDS_H */
#endif /* PAGE_FLAGS_H */
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+ struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
#ifdef CONFIG_PCI_MSI
struct list_head msi_list;
#endif
#define PCI_DEVICE_ID_HP_CISSA 0x3220
#define PCI_DEVICE_ID_HP_CISSC 0x3230
#define PCI_DEVICE_ID_HP_CISSD 0x3238
+#define PCI_DEVICE_ID_HP_CISSE 0x323a
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
#define PCI_VENDOR_ID_PCTECH 0x1042
struct net;
struct completion;
+struct mm_struct;
+
/*
* The proc filesystem constants/structures
*/
extern void proc_root_init(void);
extern void proc_misc_init(void);
-struct mm_struct;
-
void proc_flush_task(struct task_struct *task);
struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
{
RT_TABLE_UNSPEC=0,
/* User defined values */
+ RT_TABLE_COMPAT=252,
RT_TABLE_DEFAULT=253,
RT_TABLE_MAIN=254,
RT_TABLE_LOCAL=255,
return signal_pending(p) && __fatal_signal_pending(p);
}
+static inline int signal_pending_state(long state, struct task_struct *p)
+{
+ if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL)))
+ return 0;
+ if (!signal_pending(p))
+ return 0;
+
+ if (state & (__TASK_STOPPED | __TASK_TRACED))
+ return 0;
+
+ return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
+}
+
static inline int need_resched(void)
{
return unlikely(test_thread_flag(TIF_NEED_RESCHED));
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM947XX
+#ifdef CONFIG_BCM47XX
char *res = nvram_get("et0macaddr");
if (res)
memcpy(macaddr, res, 6);
return (struct tcp_request_sock *)req;
}
-struct tcp_deferred_accept_info {
- struct sock *listen_sk;
- struct request_sock *request;
-};
-
struct tcp_sock {
/* inet_connection_sock has to be the first member of tcp_sock */
struct inet_connection_sock inet_conn;
unsigned int keepalive_intvl; /* time interval between keep alive probes */
int linger2;
- struct tcp_deferred_accept_info defer_tcp_accept;
-
unsigned long last_synq_overflow;
u32 tso_deferred;
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
/* thermal zone devices with the same type share one hwmon device */
struct thermal_hwmon_device {
char type[THERMAL_NAME_LENGTH];
struct idr idr;
struct mutex lock; /* protect cooling devices list */
struct list_head node;
-#if defined(CONFIG_HWMON) || \
- (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE))
+#if defined(CONFIG_THERMAL_HWMON)
struct list_head hwmon_node;
struct thermal_hwmon_device *hwmon;
struct thermal_hwmon_attr temp_input; /* hwmon sys attr */
#ifdef __KERNEL__
# include <linux/cache.h>
# include <linux/seqlock.h>
+# include <linux/math64.h>
#endif
#ifndef _STRUCT_TIMESPEC
* timespec_add_ns - Adds nanoseconds to a timespec
* @a: pointer to timespec to be incremented
* @ns: unsigned nanoseconds value to be added
+ *
+ * This must always be inlined because its used from the x86-64 vdso,
+ * which cannot call other kernel functions.
*/
-static inline void timespec_add_ns(struct timespec *a, u64 ns)
+static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
{
- ns += a->tv_nsec;
- while(unlikely(ns >= NSEC_PER_SEC)) {
- /* The following asm() prevents the compiler from
- * optimising this loop into a modulo operation. */
- asm("" : "+r"(ns));
-
- ns -= NSEC_PER_SEC;
- a->tv_sec++;
- }
+ a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns);
a->tv_nsec = ns;
}
#endif /* __KERNEL__ */
* This routine is called by the kernel to write a series of
* characters to the tty device. The characters may come from
* user space or kernel space. This routine will return the
- * number of characters actually accepted for writing. This
- * routine is mandatory.
+ * number of characters actually accepted for writing.
*
* Optional: Required for writable devices.
*
* This routine notifies the tty driver that it should hangup the
* tty device.
*
- * Required:
+ * Optional:
*
* void (*break_ctl)(struct tty_stuct *tty, int state);
*
#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
__u8 gso_type;
__u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
- __u16 gso_size; /* Bytes to append to gso_hdr_len per frame */
+ __u16 gso_size; /* Bytes to append to hdr_len per frame */
__u16 csum_start; /* Position to start checksumming from */
__u16 csum_offset; /* Offset after that to place checksum */
};
CX25840_COMPOSITE7,
CX25840_COMPOSITE8,
- /* S-Video inputs consist of one luma input (In1-In4) ORed with one
+ /* S-Video inputs consist of one luma input (In1-In8) ORed with one
chroma input (In5-In8) */
CX25840_SVIDEO_LUMA1 = 0x10,
CX25840_SVIDEO_LUMA2 = 0x20,
CX25840_SVIDEO_LUMA3 = 0x30,
CX25840_SVIDEO_LUMA4 = 0x40,
+ CX25840_SVIDEO_LUMA5 = 0x50,
+ CX25840_SVIDEO_LUMA6 = 0x60,
+ CX25840_SVIDEO_LUMA7 = 0x70,
+ CX25840_SVIDEO_LUMA8 = 0x80,
CX25840_SVIDEO_CHROMA4 = 0x400,
CX25840_SVIDEO_CHROMA5 = 0x500,
CX25840_SVIDEO_CHROMA6 = 0x600,
extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE];
#endif
#define VFL_TYPE_VTX 3
/* Video standard functions */
-extern char *v4l2_norm_to_name(v4l2_std_id id);
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
extern int v4l2_video_std_construct(struct v4l2_standard *vs,
- int id, char *name);
+ int id, const char *name);
/* Prints the ioctl in a human-readable format */
extern void v4l_printk_ioctl(unsigned int cmd);
return skb->rtable->rt_iif;
}
+static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops)
+{
+ struct request_sock *req = reqsk_alloc(ops);
+
+ if (req != NULL)
+ inet_rsk(req)->opt = NULL;
+
+ return req;
+}
+
#endif /* _INET_SOCK_H */
a->s6_addr32[2] | a->s6_addr32[3] ) == 0);
}
+static inline int ipv6_addr_loopback(const struct in6_addr *a)
+{
+ return ((a->s6_addr32[0] | a->s6_addr32[1] |
+ a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0);
+}
+
static inline int ipv6_addr_v4mapped(const struct in6_addr *a)
{
return ((a->s6_addr32[0] | a->s6_addr32[1] |
#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
+static inline int net_alive(struct net *net)
+{
+ return net && atomic_read(&net->count);
+}
+
static inline struct net *get_net(struct net *net)
{
atomic_inc(&net->count);
return net1 == net2;
}
#else
+
+static inline int net_alive(struct net *net)
+{
+ return 1;
+}
+
static inline struct net *get_net(struct net *net)
{
return net;
/* Extensions: optional stuff which isn't permanently in struct. */
struct nf_ct_ext {
+ struct rcu_head rcu;
u8 offset[NF_CT_EXT_NUM];
u8 len;
char data[0];
struct request_sock *rskq_accept_head;
struct request_sock *rskq_accept_tail;
rwlock_t syn_wait_lock;
- u16 rskq_defer_accept;
- /* 2 bytes hole, try to pack */
+ u8 rskq_defer_accept;
+ /* 3 bytes hole, try to pack */
struct listen_sock *listen_opt;
};
#define MAX_TCP_KEEPINTVL 32767
#define MAX_TCP_KEEPCNT 127
#define MAX_TCP_SYNCNT 127
-#define MAX_TCP_ACCEPT_DEFERRED 65535
#define TCP_SYNQ_INTERVAL (HZ/5) /* Period of SYNACK timer */
extern int tcp_disconnect(struct sock *sk, int flags);
-extern void tcp_unhash(struct sock *sk);
/* From syncookies.c */
extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
IB_DEVICE_UD_TSO = (1<<19),
- IB_DEVICE_SEND_W_INV = (1<<21),
};
enum ib_atomic_cap {
#define __XEN_PUBLIC_XEN_H__
#include <asm/xen/interface.h>
+#include <asm/pvclock-abi.h>
/*
* XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS).
uint8_t evtchn_upcall_mask;
unsigned long evtchn_pending_sel;
struct arch_vcpu_info arch;
- struct vcpu_time_info time;
+ struct pvclock_vcpu_time_info time;
}; /* 64 bytes (x86) */
/*
* Wallclock time: updated only by control software. Guests should base
* their gettimeofday() syscall on this wallclock-base value.
*/
- uint32_t wc_version; /* Version counter: see vcpu_time_info_t. */
- uint32_t wc_sec; /* Secs 00:00:00 UTC, Jan 1, 1970. */
- uint32_t wc_nsec; /* Nsecs 00:00:00 UTC, Jan 1, 1970. */
+ struct pvclock_wall_clock wc;
struct arch_shared_info arch;
if (!sfd)
goto out_put_dentry;
- err = -ENOMEM;
-
file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations);
if (!file)
goto out_free;
static int sysvipc_shm_proc_show(struct seq_file *s, void *it)
{
struct shmid_kernel *shp = it;
- char *format;
-#define SMALL_STRING "%10d %10d %4o %10u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n"
-#define BIG_STRING "%10d %10d %4o %21u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n"
+#if BITS_PER_LONG <= 32
+#define SIZE_SPEC "%10lu"
+#else
+#define SIZE_SPEC "%21lu"
+#endif
- if (sizeof(size_t) <= sizeof(int))
- format = SMALL_STRING;
- else
- format = BIG_STRING;
- return seq_printf(s, format,
+ return seq_printf(s,
+ "%10d %10d %4o " SIZE_SPEC " %5u %5u "
+ "%5lu %5u %5u %5u %5u %10lu %10lu %10lu\n",
shp->shm_perm.key,
shp->shm_perm.id,
shp->shm_perm.mode,
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
return 0;
- err = audit_filter_user(&NETLINK_CB(skb), msg_type);
+ err = audit_filter_user(&NETLINK_CB(skb));
if (err == 1) {
err = 0;
if (msg_type == AUDIT_USER_TTY) {
}
/* fallthrough */
case AUDIT_LIST:
- err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
+ err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid,
uid, seq, data, nlmsg_len(nlh),
loginuid, sessionid, sid);
break;
}
/* fallthrough */
case AUDIT_LIST_RULES:
- err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
+ err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid,
uid, seq, data, nlmsg_len(nlh),
loginuid, sessionid, sid);
break;
* @data: payload data
* @datasz: size of payload data
* @loginuid: loginuid of sender
+ * @sessionid: sessionid for netlink audit message
* @sid: SE Linux Security ID of sender
*/
int audit_receive_filter(int type, int pid, int uid, int seq, void *data,
return 1;
}
-int audit_filter_user(struct netlink_skb_parms *cb, int type)
+int audit_filter_user(struct netlink_skb_parms *cb)
{
enum audit_state state = AUDIT_DISABLED;
struct audit_entry *e;
static int update_relax_domain_level(struct cpuset *cs, s64 val)
{
- if ((int)val < 0)
- val = -1;
+ if (val < -1 || val >= SD_LV_MAX)
+ return -EINVAL;
if (val != cs->relax_domain_level) {
cs->relax_domain_level = val;
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
scan_for_empty_cpusets(&top_cpuset);
+ /*
+ * Scheduler destroys domains on hotplug events.
+ * Rebuild them based on the current settings.
+ */
+ rebuild_sched_domains();
+
cgroup_unlock();
}
* private futexes.
*/
static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q,
- struct task_struct *newowner)
+ struct task_struct *newowner,
+ struct rw_semaphore *fshared)
{
u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS;
struct futex_pi_state *pi_state = q->pi_state;
+ struct task_struct *oldowner = pi_state->owner;
u32 uval, curval, newval;
- int ret;
+ int ret, attempt = 0;
/* Owner died? */
+ if (!pi_state->owner)
+ newtid |= FUTEX_OWNER_DIED;
+
+ /*
+ * We are here either because we stole the rtmutex from the
+ * pending owner or we are the pending owner which failed to
+ * get the rtmutex. We have to replace the pending owner TID
+ * in the user space variable. This must be atomic as we have
+ * to preserve the owner died bit here.
+ *
+ * Note: We write the user space value _before_ changing the
+ * pi_state because we can fault here. Imagine swapped out
+ * pages or a fork, which was running right before we acquired
+ * mmap_sem, that marked all the anonymous memory readonly for
+ * cow.
+ *
+ * Modifying pi_state _before_ the user space value would
+ * leave the pi_state in an inconsistent state when we fault
+ * here, because we need to drop the hash bucket lock to
+ * handle the fault. This might be observed in the PID check
+ * in lookup_pi_state.
+ */
+retry:
+ if (get_futex_value_locked(&uval, uaddr))
+ goto handle_fault;
+
+ while (1) {
+ newval = (uval & FUTEX_OWNER_DIED) | newtid;
+
+ curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+
+ if (curval == -EFAULT)
+ goto handle_fault;
+ if (curval == uval)
+ break;
+ uval = curval;
+ }
+
+ /*
+ * We fixed up user space. Now we need to fix the pi_state
+ * itself.
+ */
if (pi_state->owner != NULL) {
spin_lock_irq(&pi_state->owner->pi_lock);
WARN_ON(list_empty(&pi_state->list));
list_del_init(&pi_state->list);
spin_unlock_irq(&pi_state->owner->pi_lock);
- } else
- newtid |= FUTEX_OWNER_DIED;
+ }
pi_state->owner = newowner;
WARN_ON(!list_empty(&pi_state->list));
list_add(&pi_state->list, &newowner->pi_state_list);
spin_unlock_irq(&newowner->pi_lock);
+ return 0;
/*
- * We own it, so we have to replace the pending owner
- * TID. This must be atomic as we have preserve the
- * owner died bit here.
+ * To handle the page fault we need to drop the hash bucket
+ * lock here. That gives the other task (either the pending
+ * owner itself or the task which stole the rtmutex) the
+ * chance to try the fixup of the pi_state. So once we are
+ * back from handling the fault we need to check the pi_state
+ * after reacquiring the hash bucket lock and before trying to
+ * do another fixup. When the fixup has been done already we
+ * simply return.
*/
- ret = get_futex_value_locked(&uval, uaddr);
+handle_fault:
+ spin_unlock(q->lock_ptr);
- while (!ret) {
- newval = (uval & FUTEX_OWNER_DIED) | newtid;
+ ret = futex_handle_fault((unsigned long)uaddr, fshared, attempt++);
- curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+ spin_lock(q->lock_ptr);
- if (curval == -EFAULT)
- ret = -EFAULT;
- if (curval == uval)
- break;
- uval = curval;
- }
- return ret;
+ /*
+ * Check if someone else fixed it for us:
+ */
+ if (pi_state->owner != oldowner)
+ return 0;
+
+ if (ret)
+ return ret;
+
+ goto retry;
}
/*
* that case:
*/
if (q.pi_state->owner != curr)
- ret = fixup_pi_state_owner(uaddr, &q, curr);
+ ret = fixup_pi_state_owner(uaddr, &q, curr, fshared);
} else {
/*
* Catch the rare case, where the lock was released
int res;
owner = rt_mutex_owner(&q.pi_state->pi_mutex);
- res = fixup_pi_state_owner(uaddr, &q, owner);
+ res = fixup_pi_state_owner(uaddr, &q, owner,
+ fshared);
/* propagate -EFAULT, if the fixup failed */
if (res)
return 1;
}
-void kgdb_console_write(struct console *co, const char *s, unsigned count)
+static void kgdb_console_write(struct console *co, const char *s,
+ unsigned count)
{
unsigned long flags;
return -EINVAL;
for (i = 0; i < num; i++) {
ret = __register_kprobe(kps[i], called_from);
- if (ret < 0 && i > 0) {
- unregister_kprobes(kps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_kprobes(kps, i);
break;
}
}
jp->kp.break_handler = longjmp_break_handler;
ret = __register_kprobe(&jp->kp, called_from);
}
- if (ret < 0 && i > 0) {
- unregister_jprobes(jps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_jprobes(jps, i);
break;
}
}
return -EINVAL;
for (i = 0; i < num; i++) {
ret = __register_kretprobe(rps[i], called_from);
- if (ret < 0 && i > 0) {
- unregister_kretprobes(rps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_kretprobes(rps, i);
break;
}
}
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);
-EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
-
void __rcu_read_lock(void)
{
int idx;
#endif
/*
- * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems.
+ * A weight of 0 or 1 can cause arithmetics problems.
+ * A weight of a cfs_rq is the sum of weights of which entities
+ * are queued on this cfs_rq, so a weight of a entity should not be
+ * too large, so as the shares value of a task group.
* (The default weight is 1024 - so there's no practical
* limitation from this.)
*/
#define MIN_SHARES 2
-#define MAX_SHARES (ULONG_MAX - 1)
+#define MAX_SHARES (1UL << 18)
static int init_task_group_load = INIT_TASK_GROUP_LOAD;
#endif
return HRTIMER_NORESTART;
}
+#ifdef CONFIG_SMP
static void hotplug_hrtick_disable(int cpu)
{
struct rq *rq = cpu_rq(cpu);
{
hotcpu_notifier(hotplug_hrtick, 0);
}
+#endif /* CONFIG_SMP */
static void init_rq_hrtick(struct rq *rq)
{
{
u64 tmp;
- if (!lw->inv_weight)
- lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1);
+ if (!lw->inv_weight) {
+ if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST))
+ lw->inv_weight = 1;
+ else
+ lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)
+ / (lw->weight+1);
+ }
tmp = (u64)delta_exec * weight;
/*
clear_tsk_need_resched(prev);
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
- if (unlikely((prev->state & TASK_INTERRUPTIBLE) &&
- signal_pending(prev))) {
+ if (unlikely(signal_pending_state(prev->state, prev)))
prev->state = TASK_RUNNING;
- } else {
+ else
deactivate_task(rq, prev, 1);
- }
switch_count = &prev->nvcsw;
}
signal_pending(current)) ||
(state == TASK_KILLABLE &&
fatal_signal_pending(current))) {
- __remove_wait_queue(&x->wait, &wait);
- return -ERESTARTSYS;
+ timeout = -ERESTARTSYS;
+ break;
}
__set_current_state(state);
spin_unlock_irq(&x->wait.lock);
timeout = schedule_timeout(timeout);
spin_lock_irq(&x->wait.lock);
- if (!timeout) {
- __remove_wait_queue(&x->wait, &wait);
- return timeout;
- }
- } while (!x->done);
+ } while (!x->done && timeout);
__remove_wait_queue(&x->wait, &wait);
+ if (!x->done)
+ return timeout;
}
x->done--;
- return timeout;
+ return timeout ?: 1;
}
static long __sched
static int __init setup_relax_domain_level(char *str)
{
- default_relax_domain_level = simple_strtoul(str, NULL, 0);
+ unsigned long val;
+
+ val = simple_strtoul(str, NULL, 0);
+ if (val < SD_LV_MAX)
+ default_relax_domain_level = val;
+
return 1;
}
__setup("relax_domain_level=", setup_relax_domain_level);
{
}
+/*
+ * Free current domain masks.
+ * Called after all cpus are attached to NULL domain.
+ */
+static void free_sched_domains(void)
+{
+ ndoms_cur = 0;
+ if (doms_cur != &fallback_doms)
+ kfree(doms_cur);
+ doms_cur = &fallback_doms;
+}
+
/*
* Set up scheduler domains and groups. Callers must hold the hotplug lock.
* For now this just excludes isolated cpus, but could be used to
get_online_cpus();
mutex_lock(&sched_domains_mutex);
detach_destroy_domains(&cpu_online_map);
+ free_sched_domains();
err = arch_init_sched_domains(&cpu_online_map);
mutex_unlock(&sched_domains_mutex);
put_online_cpus();
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
detach_destroy_domains(&cpu_online_map);
+ free_sched_domains();
return NOTIFY_OK;
case CPU_UP_CANCELED:
return NOTIFY_DONE;
}
+#ifndef CONFIG_CPUSETS
+ /*
+ * Create default domain partitioning if cpusets are disabled.
+ * Otherwise we let cpusets rebuild the domains based on the
+ * current setup.
+ */
+
/* The hotplug lock is already held by cpu_up/cpu_down */
arch_init_sched_domains(&cpu_online_map);
+#endif
return NOTIFY_OK;
}
else
rt_se->rt_rq = parent->my_q;
- rt_se->rt_rq = &rq->rt;
rt_se->my_q = rt_rq;
rt_se->parent = parent;
INIT_LIST_HEAD(&rt_se->run_list);
#ifdef CONFIG_CGROUP_SCHED
static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime)
{
- struct task_group *tgi, *parent = tg->parent;
+ struct task_group *tgi, *parent = tg ? tg->parent : NULL;
unsigned long total = 0;
if (!parent) {
if (rt_rq->rt_time || rt_rq->rt_nr_running)
idle = 0;
spin_unlock(&rt_rq->rt_runtime_lock);
- }
+ } else if (rt_rq->rt_nr_running)
+ idle = 0;
if (enqueue)
sched_rt_rq_enqueue(rt_rq);
#endif
}
-static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
+static void __enqueue_rt_entity(struct sched_rt_entity *rt_se)
{
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
struct rt_prio_array *array = &rt_rq->active;
struct rt_rq *group_rq = group_rt_rq(rt_se);
- if (group_rq && rt_rq_throttled(group_rq))
+ /*
+ * Don't enqueue the group if its throttled, or when empty.
+ * The latter is a consequence of the former when a child group
+ * get throttled and the current group doesn't have any other
+ * active members.
+ */
+ if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running))
return;
list_add_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se));
inc_rt_tasks(rt_se, rt_rq);
}
-static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
+static void __dequeue_rt_entity(struct sched_rt_entity *rt_se)
{
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
struct rt_prio_array *array = &rt_rq->active;
* Because the prio of an upper entry depends on the lower
* entries, we must remove entries top - down.
*/
-static void dequeue_rt_stack(struct task_struct *p)
+static void dequeue_rt_stack(struct sched_rt_entity *rt_se)
{
- struct sched_rt_entity *rt_se, *back = NULL;
+ struct sched_rt_entity *back = NULL;
- rt_se = &p->rt;
for_each_sched_rt_entity(rt_se) {
rt_se->back = back;
back = rt_se;
for (rt_se = back; rt_se; rt_se = rt_se->back) {
if (on_rt_rq(rt_se))
- dequeue_rt_entity(rt_se);
+ __dequeue_rt_entity(rt_se);
+ }
+}
+
+static void enqueue_rt_entity(struct sched_rt_entity *rt_se)
+{
+ dequeue_rt_stack(rt_se);
+ for_each_sched_rt_entity(rt_se)
+ __enqueue_rt_entity(rt_se);
+}
+
+static void dequeue_rt_entity(struct sched_rt_entity *rt_se)
+{
+ dequeue_rt_stack(rt_se);
+
+ for_each_sched_rt_entity(rt_se) {
+ struct rt_rq *rt_rq = group_rt_rq(rt_se);
+
+ if (rt_rq && rt_rq->rt_nr_running)
+ __enqueue_rt_entity(rt_se);
}
}
if (wakeup)
rt_se->timeout = 0;
- dequeue_rt_stack(p);
-
- /*
- * enqueue everybody, bottom - up.
- */
- for_each_sched_rt_entity(rt_se)
- enqueue_rt_entity(rt_se);
+ enqueue_rt_entity(rt_se);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
{
struct sched_rt_entity *rt_se = &p->rt;
- struct rt_rq *rt_rq;
update_curr_rt(rq);
-
- dequeue_rt_stack(p);
-
- /*
- * re-enqueue all non-empty rt_rq entities.
- */
- for_each_sched_rt_entity(rt_se) {
- rt_rq = group_rt_rq(rt_se);
- if (rt_rq && rt_rq->rt_nr_running)
- enqueue_rt_entity(rt_se);
- }
+ dequeue_rt_entity(rt_se);
}
/*
void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se)
{
struct rt_prio_array *array = &rt_rq->active;
+ struct list_head *queue = array->queue + rt_se_prio(rt_se);
- list_move_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se));
+ if (on_rt_rq(rt_se))
+ list_move_tail(&rt_se->run_list, queue);
}
static void requeue_task_rt(struct rq *rq, struct task_struct *p)
/*
* Called when a process ceases being the active-running process, either
* voluntarily or involuntarily. Now we can calculate how long we ran.
+ * Also, if the process is still in the TASK_RUNNING state, call
+ * sched_info_queued() to mark that it has now again started waiting on
+ * the runqueue.
*/
static inline void sched_info_depart(struct task_struct *t)
{
t->sched_info.cpu_time += delta;
rq_sched_info_depart(task_rq(t), delta);
+
+ if (t->state == TASK_RUNNING)
+ sched_info_queued(t);
}
/*
return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */
}
-void touch_softlockup_watchdog(void)
+static void __touch_softlockup_watchdog(void)
{
int this_cpu = raw_smp_processor_id();
__raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu);
}
+
+void touch_softlockup_watchdog(void)
+{
+ __raw_get_cpu_var(touch_timestamp) = 0;
+}
EXPORT_SYMBOL(touch_softlockup_watchdog);
void touch_all_softlockup_watchdogs(void)
unsigned long now;
if (touch_timestamp == 0) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
return;
}
/* do not print during early bootup: */
if (unlikely(system_state != SYSTEM_RUNNING)) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
return;
}
sched_setscheduler(current, SCHED_FIFO, ¶m);
/* initialize timestamp */
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
set_current_state(TASK_INTERRUPTIBLE);
/*
* debug-printout triggers in softlockup_tick().
*/
while (!kthread_should_stop()) {
- touch_softlockup_watchdog();
+ __touch_softlockup_watchdog();
schedule();
if (kthread_should_stop())
#endif
#endif /* BITS_PER_LONG == 32 */
+
+/*
+ * Iterative div/mod for use when dividend is not expected to be much
+ * bigger than divisor.
+ */
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ return __iter_div_u64_rem(dividend, divisor, remainder);
+}
+EXPORT_SYMBOL(iter_div_u64_rem);
return root->gfp_mask & __GFP_BITS_MASK;
}
+static inline void tag_set(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ __set_bit(offset, node->tags[tag]);
+}
+
+static inline void tag_clear(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ __clear_bit(offset, node->tags[tag]);
+}
+
+static inline int tag_get(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ return test_bit(offset, node->tags[tag]);
+}
+
+static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag)
+{
+ root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT));
+}
+
+static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag)
+{
+ root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT));
+}
+
+static inline void root_tag_clear_all(struct radix_tree_root *root)
+{
+ root->gfp_mask &= __GFP_BITS_MASK;
+}
+
+static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag)
+{
+ return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT));
+}
+
+/*
+ * Returns 1 if any slot in the node has this tag set.
+ * Otherwise returns 0.
+ */
+static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag)
+{
+ int idx;
+ for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) {
+ if (node->tags[tag][idx])
+ return 1;
+ }
+ return 0;
+}
/*
* This assumes that the caller has performed appropriate preallocation, and
* that the caller has pinned this thread of control to the current CPU.
{
struct radix_tree_node *node =
container_of(head, struct radix_tree_node, rcu_head);
+
+ /*
+ * must only free zeroed nodes into the slab. radix_tree_shrink
+ * can leave us with a non-NULL entry in the first slot, so clear
+ * that here to make sure.
+ */
+ tag_clear(node, 0, 0);
+ tag_clear(node, 1, 0);
+ node->slots[0] = NULL;
+ node->count = 0;
+
kmem_cache_free(radix_tree_node_cachep, node);
}
}
EXPORT_SYMBOL(radix_tree_preload);
-static inline void tag_set(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- __set_bit(offset, node->tags[tag]);
-}
-
-static inline void tag_clear(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- __clear_bit(offset, node->tags[tag]);
-}
-
-static inline int tag_get(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- return test_bit(offset, node->tags[tag]);
-}
-
-static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag)
-{
- root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT));
-}
-
-
-static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag)
-{
- root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT));
-}
-
-static inline void root_tag_clear_all(struct radix_tree_root *root)
-{
- root->gfp_mask &= __GFP_BITS_MASK;
-}
-
-static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag)
-{
- return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT));
-}
-
-/*
- * Returns 1 if any slot in the node has this tag set.
- * Otherwise returns 0.
- */
-static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag)
-{
- int idx;
- for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) {
- if (node->tags[tag][idx])
- return 1;
- }
- return 0;
-}
-
/*
* Return the maximum key which can be store into a
* radix tree with height HEIGHT.
newptr = radix_tree_ptr_to_indirect(newptr);
root->rnode = newptr;
root->height--;
- /* must only free zeroed nodes into the slab */
- tag_clear(to_free, 0, 0);
- tag_clear(to_free, 1, 0);
- to_free->slots[0] = NULL;
- to_free->count = 0;
radix_tree_node_free(to_free);
}
}
return init_bootmem_core(pgdat, freepfn, startpfn, endpfn);
}
-void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
+int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
unsigned long size, int flags)
{
int ret;
ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
if (ret < 0)
- return;
+ return -ENOMEM;
reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
+
+ return 0;
}
void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
goto no_page_table;
ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
- if (!ptep)
- goto out;
pte = *ptep;
if (!pte_present(pte))
- goto unlock;
+ goto no_page;
if ((flags & FOLL_WRITE) && !pte_write(pte))
goto unlock;
page = vm_normal_page(vma, address, pte);
if (unlikely(!page))
- goto unlock;
+ goto bad_page;
if (flags & FOLL_GET)
get_page(page);
out:
return page;
+bad_page:
+ pte_unmap_unlock(ptep, ptl);
+ return ERR_PTR(-EFAULT);
+
+no_page:
+ pte_unmap_unlock(ptep, ptl);
+ if (!pte_none(pte))
+ return page;
+ /* Fall through to ZERO_PAGE handling */
no_page_table:
/*
* When core dumping an enormous anonymous area that nobody
return page;
}
+/* Can we do the FOLL_ANON optimization? */
+static inline int use_zero_page(struct vm_area_struct *vma)
+{
+ /*
+ * We don't want to optimize FOLL_ANON for make_pages_present()
+ * when it tries to page in a VM_LOCKED region. As to VM_SHARED,
+ * we want to get the page from the page tables to make sure
+ * that we serialize and update with any other user of that
+ * mapping.
+ */
+ if (vma->vm_flags & (VM_LOCKED | VM_SHARED))
+ return 0;
+ /*
+ * And if we have a fault or a nopfn routine, it's not an
+ * anonymous region.
+ */
+ return !vma->vm_ops ||
+ (!vma->vm_ops->fault && !vma->vm_ops->nopfn);
+}
+
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, int len, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
foll_flags = FOLL_TOUCH;
if (pages)
foll_flags |= FOLL_GET;
- if (!write && !(vma->vm_flags & VM_LOCKED) &&
- (!vma->vm_ops || !vma->vm_ops->fault))
+ if (!write && use_zero_page(vma))
foll_flags |= FOLL_ANON;
do {
cond_resched();
}
+ if (IS_ERR(page))
+ return i ? i : PTR_ERR(page);
if (pages) {
pages[i] = page;
page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (likely(pte_same(*page_table, orig_pte))) {
if (old_page) {
- page_remove_rmap(old_page, vma);
if (!PageAnon(old_page)) {
dec_mm_counter(mm, file_rss);
inc_mm_counter(mm, anon_rss);
lru_cache_add_active(new_page);
page_add_new_anon_rmap(new_page, vma, address);
+ if (old_page) {
+ /*
+ * Only after switching the pte to the new page may
+ * we remove the mapcount here. Otherwise another
+ * process may come and find the rmap count decremented
+ * before the pte is switched to the new page, and
+ * "reuse" the old page writing into it while our pte
+ * here still points into it and can be read by other
+ * threads.
+ *
+ * The critical issue is to order this
+ * page_remove_rmap with the ptp_clear_flush above.
+ * Those stores are ordered by (if nothing else,)
+ * the barrier present in the atomic_add_negative
+ * in page_remove_rmap.
+ *
+ * Then the TLB flush in ptep_clear_flush ensures that
+ * no process can access the old page before the
+ * decremented mapcount is visible. And the old page
+ * cannot be reused until after the decremented
+ * mapcount is visible. So transitively, TLBs to
+ * old page will be flushed before it can be reused.
+ */
+ page_remove_rmap(old_page, vma);
+ }
+
/* Free the old page.. */
new_page = old_page;
ret |= VM_FAULT_WRITE;
goto set_status;
page = follow_page(vma, pp->addr, FOLL_GET);
+
+ err = PTR_ERR(page);
+ if (IS_ERR(page))
+ goto set_status;
+
err = -ENOENT;
if (!page)
goto set_status;
goto set_status;
page = follow_page(vma, pm->addr, 0);
+
+ err = PTR_ERR(page);
+ if (IS_ERR(page))
+ goto set_status;
+
err = -ENOENT;
/* Use PageReserved to check for zero page */
if (!page || PageReserved(page))
unsigned int kobjsize(const void *objp)
{
struct page *page;
- int order = 0;
/*
* If the object we have should not have ksize performed on it,
* return size of 0
*/
- if (!objp)
- return 0;
-
- if ((unsigned long)objp >= memory_end)
+ if (!objp || !virt_addr_valid(objp))
return 0;
page = virt_to_head_page(objp);
- if (!page)
- return 0;
/*
* If the allocator sets PageSlab, we know the pointer came from
/*
* The ksize() function is only guaranteed to work for pointers
- * returned by kmalloc(). So handle arbitrary pointers, that we expect
- * always to be compound pages, here.
- */
- if (PageCompound(page))
- order = compound_order(page);
-
- /*
- * Finally, handle arbitrary pointers that don't set PageSlab.
- * Default to 0-order in the case when we're unable to ksize()
- * the object.
+ * returned by kmalloc(). So handle arbitrary pointers here.
*/
- return PAGE_SIZE << order;
+ return PAGE_SIZE << compound_order(page);
}
/*
printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
KERN_EMERG "Backtrace:\n");
dump_stack();
- page->flags &= ~(1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_reclaim |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_buddy );
+ page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD;
set_page_count(page, 0);
reset_page_mapcount(page);
page->mapping = NULL;
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_FREE)))
bad_page(page);
if (PageDirty(page))
__ClearPageDirty(page);
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_PREP)))
bad_page(page);
/*
#include <linux/sched.h>
static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pte_t *pte;
int err = 0;
pte = pte_offset_map(pmd, addr);
for (;;) {
- err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, private);
+ err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
if (err)
break;
addr += PAGE_SIZE;
}
static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pmd_t *pmd;
unsigned long next;
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pmd_entry)
- err = walk->pmd_entry(pmd, addr, next, private);
+ err = walk->pmd_entry(pmd, addr, next, walk);
if (!err && walk->pte_entry)
- err = walk_pte_range(pmd, addr, next, walk, private);
+ err = walk_pte_range(pmd, addr, next, walk);
if (err)
break;
} while (pmd++, addr = next, addr != end);
}
static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pud_t *pud;
unsigned long next;
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pud_entry)
- err = walk->pud_entry(pud, addr, next, private);
+ err = walk->pud_entry(pud, addr, next, walk);
if (!err && (walk->pmd_entry || walk->pte_entry))
- err = walk_pmd_range(pud, addr, next, walk, private);
+ err = walk_pmd_range(pud, addr, next, walk);
if (err)
break;
} while (pud++, addr = next, addr != end);
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
- * @private: private data passed to the callback function
*
* Recursively walk the page table for the memory area in a VMA,
* calling supplied callbacks. Callbacks are called in-order (first
* PGD, first PUD, first PMD, first PTE, second PTE... second PMD,
* etc.). If lower-level callbacks are omitted, walking depth is reduced.
*
- * Each callback receives an entry pointer, the start and end of the
- * associated range, and a caller-supplied private data pointer.
+ * Each callback receives an entry pointer and the start and end of the
+ * associated range, and a copy of the original mm_walk for access to
+ * the ->private or ->mm fields.
*
* No locks are taken, but the bottom level iterator will map PTE
* directories from highmem if necessary.
* If any callback returns a non-zero value, the walk is aborted and
* the return value is propagated back to the caller. Otherwise 0 is returned.
*/
-int walk_page_range(const struct mm_struct *mm,
- unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+int walk_page_range(unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
{
pgd_t *pgd;
unsigned long next;
if (addr >= end)
return err;
- pgd = pgd_offset(mm, addr);
+ if (!walk->mm)
+ return -EINVAL;
+
+ pgd = pgd_offset(walk->mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pgd_entry)
- err = walk->pgd_entry(pgd, addr, next, private);
+ err = walk->pgd_entry(pgd, addr, next, walk);
if (!err &&
(walk->pud_entry || walk->pmd_entry || walk->pte_entry))
- err = walk_pud_range(pgd, addr, next, walk, private);
+ err = walk_pud_range(pgd, addr, next, walk);
if (err)
break;
} while (pgd++, addr = next, addr != end);
if (cpuset_zone_allowed_hardwall(zone, flags) &&
cache->nodelists[nid] &&
- cache->nodelists[nid]->free_objects)
+ cache->nodelists[nid]->free_objects) {
obj = ____cache_alloc_node(cache,
flags | GFP_THISNODE, nid);
+ if (obj)
+ break;
+ }
}
if (!obj) {
struct scan_control *sc)
{
int priority;
- int ret = 0;
+ unsigned long ret = 0;
unsigned long total_scanned = 0;
unsigned long nr_reclaimed = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
return 0;
}
}
- } else {
- skb_push(skb, 2);
- if (brdev->payload == p_bridged)
+ } else { /* e_vc */
+ if (brdev->payload == p_bridged) {
+ skb_push(skb, 2);
memset(skb->data, 0, 2);
+ } else { /* p_routed */
+ skb_pull(skb, ETH_HLEN);
+ }
}
skb_debug(skb);
(skb->data + 6, ethertype_ipv4,
sizeof(ethertype_ipv4)) == 0)
skb->protocol = __constant_htons(ETH_P_IP);
- else {
- brdev->stats.rx_errors++;
- dev_kfree_skb(skb);
- return;
- }
+ else
+ goto error;
skb_pull(skb, sizeof(llc_oui_ipv4));
skb_reset_network_header(skb);
skb->pkt_type = PACKET_HOST;
(memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) {
skb_pull(skb, sizeof(llc_oui_pid_pad));
skb->protocol = eth_type_trans(skb, net_dev);
- } else {
- brdev->stats.rx_errors++;
- dev_kfree_skb(skb);
- return;
- }
+ } else
+ goto error;
- } else {
- /* first 2 chars should be 0 */
- if (*((u16 *) (skb->data)) != 0) {
- brdev->stats.rx_errors++;
- dev_kfree_skb(skb);
- return;
+ } else { /* e_vc */
+ if (brdev->payload == p_routed) {
+ struct iphdr *iph;
+
+ skb_reset_network_header(skb);
+ iph = ip_hdr(skb);
+ if (iph->version == 4)
+ skb->protocol = __constant_htons(ETH_P_IP);
+ else if (iph->version == 6)
+ skb->protocol = __constant_htons(ETH_P_IPV6);
+ else
+ goto error;
+ skb->pkt_type = PACKET_HOST;
+ } else { /* p_bridged */
+ /* first 2 chars should be 0 */
+ if (*((u16 *) (skb->data)) != 0)
+ goto error;
+ skb_pull(skb, BR2684_PAD_LEN);
+ skb->protocol = eth_type_trans(skb, net_dev);
}
- skb_pull(skb, BR2684_PAD_LEN + ETH_HLEN); /* pad, dstmac, srcmac, ethtype */
- skb->protocol = eth_type_trans(skb, net_dev);
}
#ifdef CONFIG_ATM_BR2684_IPFILTER
- if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) {
- brdev->stats.rx_dropped++;
- dev_kfree_skb(skb);
- return;
- }
+ if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb)))
+ goto dropped;
#endif /* CONFIG_ATM_BR2684_IPFILTER */
skb->dev = net_dev;
ATM_SKB(skb)->vcc = atmvcc; /* needed ? */
pr_debug("received packet's protocol: %x\n", ntohs(skb->protocol));
skb_debug(skb);
- if (unlikely(!(net_dev->flags & IFF_UP))) {
- /* sigh, interface is down */
- brdev->stats.rx_dropped++;
- dev_kfree_skb(skb);
- return;
- }
+ /* sigh, interface is down? */
+ if (unlikely(!(net_dev->flags & IFF_UP)))
+ goto dropped;
brdev->stats.rx_packets++;
brdev->stats.rx_bytes += skb->len;
memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
netif_rx(skb);
+ return;
+
+dropped:
+ brdev->stats.rx_dropped++;
+ goto free_skb;
+error:
+ brdev->stats.rx_errors++;
+free_skb:
+ dev_kfree_skb(skb);
+ return;
}
/*
struct sk_buff *next = skb->next;
skb->next = skb->prev = NULL;
+ br2684_push(atmvcc, skb);
BRPRIV(skb->dev)->stats.rx_bytes -= skb->len;
BRPRIV(skb->dev)->stats.rx_packets--;
- br2684_push(atmvcc, skb);
skb = next;
}
#include <linux/err.h>
#include <linux/ctype.h>
#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
#include "net-sysfs.h"
}
EXPORT_SYMBOL(netif_device_attach);
+static bool can_checksum_protocol(unsigned long features, __be16 protocol)
+{
+ return ((features & NETIF_F_GEN_CSUM) ||
+ ((features & NETIF_F_IP_CSUM) &&
+ protocol == htons(ETH_P_IP)) ||
+ ((features & NETIF_F_IPV6_CSUM) &&
+ protocol == htons(ETH_P_IPV6)));
+}
+
+static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb)
+{
+ if (can_checksum_protocol(dev->features, skb->protocol))
+ return true;
+
+ if (skb->protocol == htons(ETH_P_8021Q)) {
+ struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
+ if (can_checksum_protocol(dev->features & dev->vlan_features,
+ veh->h_vlan_encapsulated_proto))
+ return true;
+ }
+
+ return false;
+}
/*
* Invalidate hardware checksum when packet is to be mangled, and
if (skb->ip_summed == CHECKSUM_PARTIAL) {
skb_set_transport_header(skb, skb->csum_start -
skb_headroom(skb));
-
- if (!(dev->features & NETIF_F_GEN_CSUM) &&
- !((dev->features & NETIF_F_IP_CSUM) &&
- skb->protocol == htons(ETH_P_IP)) &&
- !((dev->features & NETIF_F_IPV6_CSUM) &&
- skb->protocol == htons(ETH_P_IPV6)))
- if (skb_checksum_help(skb))
- goto out_kfree_skb;
+ if (!dev_can_checksum(dev, skb) && skb_checksum_help(skb))
+ goto out_kfree_skb;
}
gso:
rcu_read_lock();
+ /* Don't receive packets in an exiting network namespace */
+ if (!net_alive(dev_net(skb->dev)))
+ goto out;
+
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
struct pernet_operations *ops;
struct net *net;
+ /* Be very certain incoming network packets will not find us */
+ rcu_barrier();
+
net = container_of(work, struct net, work);
mutex_lock(&net_mutex);
while (1) {
const u8 len = dccp_ackvec_len(av, index);
- const u8 state = dccp_ackvec_state(av, index);
+ const u8 av_state = dccp_ackvec_state(av, index);
/*
* valid packets not yet in av_buf have a reserved
* entry, with a len equal to 0.
*/
- if (state == DCCP_ACKVEC_STATE_NOT_RECEIVED &&
+ if (av_state == DCCP_ACKVEC_STATE_NOT_RECEIVED &&
len == 0 && delta == 0) { /* Found our
reserved seat! */
dccp_pr_debug("Found %llu reserved seat!\n",
return -EILSEQ;
}
-#ifdef CONFIG_IP_DCCP_DEBUG
-void dccp_ackvector_print(const u64 ackno, const unsigned char *vector, int len)
-{
- dccp_pr_debug_cat("ACK vector len=%d, ackno=%llu |", len,
- (unsigned long long)ackno);
-
- while (len--) {
- const u8 state = (*vector & DCCP_ACKVEC_STATE_MASK) >> 6;
- const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK;
-
- dccp_pr_debug_cat("%d,%d|", state, rl);
- ++vector;
- }
-
- dccp_pr_debug_cat("\n");
-}
-
-void dccp_ackvec_print(const struct dccp_ackvec *av)
-{
- dccp_ackvector_print(av->av_buf_ackno,
- av->av_buf + av->av_buf_head,
- av->av_vec_len);
-}
-#endif
-
static void dccp_ackvec_throw_record(struct dccp_ackvec *av,
struct dccp_ackvec_record *avr)
{
} else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld)
- (s64)hctx->ccid3hctx_rtt >= 0) {
- hctx->ccid3hctx_x =
- max(min(2 * hctx->ccid3hctx_x, min_rate),
+ hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate);
+ hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
hctx->ccid3hctx_rtt));
hctx->ccid3hctx_t_ld = now;
hctx->ccid3hctx_x = rfc3390_initial_rate(sk);
hctx->ccid3hctx_t_ld = now;
} else {
- /* Sender does not have RTT sample: X_pps = 1 pkt/sec */
- hctx->ccid3hctx_x = hctx->ccid3hctx_s;
+ /*
+ * Sender does not have RTT sample:
+ * - set fallback RTT (RFC 4340, 3.4) since a RTT value
+ * is needed in several parts (e.g. window counter);
+ * - set sending rate X_pps = 1pps as per RFC 3448, 4.2.
+ */
+ hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT;
+ hctx->ccid3hctx_x = hctx->ccid3hctx_s;
hctx->ccid3hctx_x <<= 6;
}
ccid3_update_send_interval(hctx);
MODULE_PARM_DESC(tfrc_debug, "Enable debug messages");
#endif
-extern int tfrc_tx_packet_history_init(void);
-extern void tfrc_tx_packet_history_exit(void);
-extern int tfrc_rx_packet_history_init(void);
-extern void tfrc_rx_packet_history_exit(void);
-
-extern int tfrc_li_init(void);
-extern void tfrc_li_exit(void);
-
static int __init tfrc_module_init(void)
{
int rc = tfrc_li_init();
* (at your option) any later version.
*/
#include <linux/types.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include "../../dccp.h"
/* internal includes that this module exports: */
#include "loss_interval.h"
#endif
/* integer-arithmetic divisions of type (a * 1000000)/b */
-static inline u64 scaled_div(u64 a, u32 b)
+static inline u64 scaled_div(u64 a, u64 b)
{
BUG_ON(b==0);
- a *= 1000000;
- do_div(a, b);
- return a;
+ return div64_u64(a * 1000000, b);
}
-static inline u32 scaled_div32(u64 a, u32 b)
+static inline u32 scaled_div32(u64 a, u64 b)
{
u64 result = scaled_div(a, b);
if (result > UINT_MAX) {
- DCCP_CRIT("Overflow: a(%llu)/b(%u) > ~0U",
- (unsigned long long)a, b);
+ DCCP_CRIT("Overflow: %llu/%llu > UINT_MAX",
+ (unsigned long long)a, (unsigned long long)b);
return UINT_MAX;
}
return result;
return avg ? (weight * avg + (10 - weight) * newval) / 10 : newval;
}
-extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
-extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
+extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
+extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
+extern int tfrc_tx_packet_history_init(void);
+extern void tfrc_tx_packet_history_exit(void);
+extern int tfrc_rx_packet_history_init(void);
+extern void tfrc_rx_packet_history_exit(void);
+
+extern int tfrc_li_init(void);
+extern void tfrc_li_exit(void);
#endif /* _TFRC_H_ */
EXPORT_SYMBOL_GPL(tfrc_calc_x);
-/*
+/**
* tfrc_calc_x_reverse_lookup - try to find p given f(p)
*
* @fvalue: function value to match, scaled by 1000000
/* Error cases. */
if (fvalue < tfrc_calc_x_lookup[0][1]) {
- DCCP_WARN("fvalue %d smaller than resolution\n", fvalue);
- return tfrc_calc_x_lookup[0][1];
+ DCCP_WARN("fvalue %u smaller than resolution\n", fvalue);
+ return TFRC_SMALLEST_P;
}
if (fvalue > tfrc_calc_x_lookup[TFRC_CALC_X_ARRSIZE - 1][0]) {
- DCCP_WARN("fvalue %d exceeds bounds!\n", fvalue);
+ DCCP_WARN("fvalue %u exceeds bounds!\n", fvalue);
return 1000000;
}
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
- req = reqsk_alloc(&dccp_request_sock_ops);
+ req = inet_reqsk_alloc(&dccp_request_sock_ops);
if (req == NULL)
goto drop;
ireq = inet_rsk(req);
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
- ireq->opt = NULL;
/*
* Step 3: Process LISTEN state
ireq6 = inet6_rsk(req);
ipv6_addr_copy(&ireq6->rmt_addr, &ipv6_hdr(skb)->saddr);
ipv6_addr_copy(&ireq6->loc_addr, &ipv6_hdr(skb)->daddr);
- ireq6->pktopts = NULL;
if (ipv6_opt_accepted(sk, skb) ||
np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||
/* See dccp_v4_conn_request */
newdmsk->dccpms_sequence_window = req->rcv_wnd;
- newdp->dccps_gar = newdp->dccps_isr = dreq->dreq_isr;
- dccp_update_gsr(newsk, dreq->dreq_isr);
-
- newdp->dccps_iss = dreq->dreq_iss;
+ newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss;
dccp_update_gss(newsk, dreq->dreq_iss);
+ newdp->dccps_isr = dreq->dreq_isr;
+ dccp_update_gsr(newsk, dreq->dreq_isr);
+
/*
* SWL and AWL are initially adjusted so that they are not less than
* the initial Sequence Numbers received and sent, respectively:
*
* CCID-specific options are ignored during connection setup, as
* negotiation may still be in progress (see RFC 4340, 10.3).
+ * The same applies to Ack Vectors, as these depend on the CCID.
*
*/
- if (dreq != NULL && opt >= 128)
+ if (dreq != NULL && (opt >= 128 ||
+ opt == DCCPO_ACK_VECTOR_0 || opt == DCCPO_ACK_VECTOR_1))
goto ignore_option;
switch (opt) {
EXPORT_SYMBOL_GPL(dccp_send_ack);
+#if 0
/* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */
void dccp_send_delayed_ack(struct sock *sk)
{
icsk->icsk_ack.timeout = timeout;
sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout);
}
+#endif
void dccp_send_sync(struct sock *sk, const u64 ackno,
const enum dccp_pkt_type pkt_type)
static const char procname[] = "dccpprobe";
-struct {
+static struct {
struct kfifo *fifo;
spinlock_t lock;
wait_queue_head_t wait;
rtm->rtm_dst_len = dst_len;
rtm->rtm_src_len = 0;
rtm->rtm_tos = tos;
- rtm->rtm_table = tb_id;
+ if (tb_id < 256)
+ rtm->rtm_table = tb_id;
+ else
+ rtm->rtm_table = RT_TABLE_COMPAT;
NLA_PUT_U32(skb, RTA_TABLE, tb_id);
rtm->rtm_type = type;
rtm->rtm_flags = fi->fib_flags;
struct inet_connection_sock *icsk = inet_csk(parent);
struct request_sock_queue *queue = &icsk->icsk_accept_queue;
struct listen_sock *lopt = queue->listen_opt;
- int thresh = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
+ int max_retries = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
+ int thresh = max_retries;
unsigned long now = jiffies;
struct request_sock **reqp, *req;
int i, budget;
}
}
+ if (queue->rskq_defer_accept)
+ max_retries = queue->rskq_defer_accept;
+
budget = 2 * (lopt->nr_table_entries / (timeout / interval));
i = lopt->clock_hand;
reqp=&lopt->syn_table[i];
while ((req = *reqp) != NULL) {
if (time_after_eq(now, req->expires)) {
- if (req->retrans < thresh &&
- !req->rsk_ops->rtx_syn_ack(parent, req)) {
+ if ((req->retrans < thresh ||
+ (inet_rsk(req)->acked && req->retrans < max_retries))
+ && !req->rsk_ops->rtx_syn_ack(parent, req)) {
unsigned long timeo;
if (req->retrans++ == 0)
spin_lock_bh(&nf_nat_lock);
hlist_del_rcu(&nat->bysource);
- nat->ct = NULL;
spin_unlock_bh(&nf_nat_lock);
}
return;
spin_lock_bh(&nf_nat_lock);
- hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource);
new_nat->ct = ct;
+ hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource);
spin_unlock_bh(&nf_nat_lock);
}
srcp = inet->num;
seq_printf(seq, "%4d: %08X:%04X %08X:%04X"
- " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d",
+ " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
i, src, srcp, dest, destp, sp->sk_state,
atomic_read(&sp->sk_wmem_alloc),
atomic_read(&sp->sk_rmem_alloc),
cookie_check_timestamp(&tcp_opt);
ret = NULL;
- req = reqsk_alloc(&tcp_request_sock_ops); /* for safety */
+ req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */
if (!req)
goto out;
ireq->rmt_port = th->source;
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
- ireq->opt = NULL;
ireq->snd_wscale = tcp_opt.snd_wscale;
ireq->rcv_wscale = tcp_opt.rcv_wscale;
ireq->sack_ok = tcp_opt.sack_ok;
break;
case TCP_DEFER_ACCEPT:
- if (val < 0) {
- err = -EINVAL;
- } else {
- if (val > MAX_TCP_ACCEPT_DEFERRED)
- val = MAX_TCP_ACCEPT_DEFERRED;
- icsk->icsk_accept_queue.rskq_defer_accept = val;
+ icsk->icsk_accept_queue.rskq_defer_accept = 0;
+ if (val > 0) {
+ /* Translate value in seconds to number of
+ * retransmits */
+ while (icsk->icsk_accept_queue.rskq_defer_accept < 32 &&
+ val > ((TCP_TIMEOUT_INIT / HZ) <<
+ icsk->icsk_accept_queue.rskq_defer_accept))
+ icsk->icsk_accept_queue.rskq_defer_accept++;
+ icsk->icsk_accept_queue.rskq_defer_accept++;
}
break;
val = (val ? : sysctl_tcp_fin_timeout) / HZ;
break;
case TCP_DEFER_ACCEPT:
- val = icsk->icsk_accept_queue.rskq_defer_accept;
+ val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 :
+ ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1));
break;
case TCP_WINDOW_CLAMP:
val = tp->window_clamp;
}
}
-static int tcp_defer_accept_check(struct sock *sk)
-{
- struct tcp_sock *tp = tcp_sk(sk);
-
- if (tp->defer_tcp_accept.request) {
- int queued_data = tp->rcv_nxt - tp->copied_seq;
- int hasfin = !skb_queue_empty(&sk->sk_receive_queue) ?
- tcp_hdr((struct sk_buff *)
- sk->sk_receive_queue.prev)->fin : 0;
-
- if (queued_data && hasfin)
- queued_data--;
-
- if (queued_data &&
- tp->defer_tcp_accept.listen_sk->sk_state == TCP_LISTEN) {
- if (sock_flag(sk, SOCK_KEEPOPEN)) {
- inet_csk_reset_keepalive_timer(sk,
- keepalive_time_when(tp));
- } else {
- inet_csk_delete_keepalive_timer(sk);
- }
-
- inet_csk_reqsk_queue_add(
- tp->defer_tcp_accept.listen_sk,
- tp->defer_tcp_accept.request,
- sk);
-
- tp->defer_tcp_accept.listen_sk->sk_data_ready(
- tp->defer_tcp_accept.listen_sk, 0);
-
- sock_put(tp->defer_tcp_accept.listen_sk);
- sock_put(sk);
- tp->defer_tcp_accept.listen_sk = NULL;
- tp->defer_tcp_accept.request = NULL;
- } else if (hasfin ||
- tp->defer_tcp_accept.listen_sk->sk_state != TCP_LISTEN) {
- tcp_reset(sk);
- return -1;
- }
- }
- return 0;
-}
-
static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp_data_snd_check(sk);
tcp_ack_snd_check(sk);
-
- tcp_defer_accept_check(sk);
return 0;
csum_error:
int sysctl_tcp_tw_reuse __read_mostly;
int sysctl_tcp_low_latency __read_mostly;
-/* Check TCP sequence numbers in ICMP packets. */
-#define ICMP_MIN_LENGTH 8
-
-void tcp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb);
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_md5sig_key *tcp_v4_md5_do_lookup(struct sock *sk,
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
- req = reqsk_alloc(&tcp_request_sock_ops);
+ req = inet_reqsk_alloc(&tcp_request_sock_ops);
if (!req)
goto drop;
sk->sk_sndmsg_page = NULL;
}
- if (tp->defer_tcp_accept.request) {
- reqsk_free(tp->defer_tcp_accept.request);
- sock_put(tp->defer_tcp_accept.listen_sk);
- sock_put(sk);
- tp->defer_tcp_accept.listen_sk = NULL;
- tp->defer_tcp_accept.request = NULL;
- }
-
atomic_dec(&tcp_sockets_allocated);
return 0;
does sequence test, SYN is truncated, and thus we consider
it a bare ACK.
- Both ends (listening sockets) accept the new incoming
- connection and try to talk to each other. 8-)
+ If icsk->icsk_accept_queue.rskq_defer_accept, we silently drop this
+ bare ACK. Otherwise, we create an established connection. Both
+ ends (listening sockets) accept the new incoming connection and try
+ to talk to each other. 8-)
Note: This case is both harmless, and rare. Possibility is about the
same as us discovering intelligent life on another plant tomorrow.
if (!(flg & TCP_FLAG_ACK))
return NULL;
+ /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
+ if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+ TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
+ inet_rsk(req)->acked = 1;
+ return NULL;
+ }
+
/* OK, ACK is valid, create big socket and
* feed this segment to it. It will repeat all
* the tests. THIS SEGMENT MUST MOVE SOCKET TO
inet_csk_reqsk_queue_unlink(sk, req, prev);
inet_csk_reqsk_queue_removed(sk, req);
- if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
- TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
-
- /* the accept queue handling is done is est recv slow
- * path so lets make sure to start there
- */
- tcp_sk(child)->pred_flags = 0;
- sock_hold(sk);
- sock_hold(child);
- tcp_sk(child)->defer_tcp_accept.listen_sk = sk;
- tcp_sk(child)->defer_tcp_accept.request = req;
-
- inet_csk_reset_keepalive_timer(child,
- inet_csk(sk)->icsk_accept_queue.rskq_defer_accept * HZ);
- } else {
- inet_csk_reqsk_queue_add(sk, req, child);
- }
-
+ inet_csk_reqsk_queue_add(sk, req, child);
return child;
listen_overflow:
goto death;
}
- if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) {
- tcp_send_active_reset(sk, GFP_ATOMIC);
- goto death;
- }
-
if (!sock_flag(sk, SOCK_KEEPOPEN) || sk->sk_state == TCP_CLOSE)
goto out;
IP_ECN_clear(top_iph);
top_iph->frag_off = (flags & XFRM_STATE_NOPMTUDISC) ?
- 0 : XFRM_MODE_SKB_CB(skb)->frag_off;
+ 0 : (XFRM_MODE_SKB_CB(skb)->frag_off & htons(IP_DF));
ip_select_ident(top_iph, dst->child, NULL);
top_iph->ttl = dst_metric(dst->child, RTAX_HOPLIMIT);
np->mcast_hops = -1;
np->mc_loop = 1;
np->pmtudisc = IPV6_PMTUDISC_WANT;
- np->ipv6only = init_net.ipv6.sysctl.bindv6only;
+ np->ipv6only = net->ipv6.sysctl.bindv6only;
/* Init the ipv4 part of the socket since we can have sockets
* using v6 API for ipv4.
}
*hlimit = *(int *)CMSG_DATA(cmsg);
+ if (*hlimit < -1 || *hlimit > 0xff) {
+ err = -EINVAL;
+ goto exit_f;
+ }
+
break;
case IPV6_TCLASS:
if (hdr->version != 6)
goto err;
+ /*
+ * RFC4291 2.5.3
+ * A packet received on an interface with a destination address
+ * of loopback must be dropped.
+ */
+ if (!(dev->flags & IFF_LOOPBACK) &&
+ ipv6_addr_loopback(&hdr->daddr))
+ goto err;
+
skb->transport_header = skb->network_header + sizeof(*hdr);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
/* RA packet may be delivered ONLY to IPPROTO_RAW socket */
if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW)
- return -EINVAL;
+ return -ENOPROTOOPT;
new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
case IPV6_DSTOPTS:
{
struct ipv6_txoptions *opt;
+
+ /* remove any sticky options header with a zero option
+ * length, per RFC3542.
+ */
if (optlen == 0)
optval = NULL;
+ else if (optlen < sizeof(struct ipv6_opt_hdr) ||
+ optlen & 0x7 || optlen > 8 * 255)
+ goto e_inval;
/* hop-by-hop / destination options are privileged option */
retv = -EPERM;
if (optname != IPV6_RTHDR && !capable(CAP_NET_RAW))
break;
- if (optlen < sizeof(struct ipv6_opt_hdr) ||
- optlen & 0x7 || optlen > 8 * 255)
- goto e_inval;
-
opt = ipv6_renew_options(sk, np->opt, optname,
(struct ipv6_opt_hdr __user *)optval,
optlen);
case IPV6_MULTICAST_HOPS:
if (sk->sk_type == SOCK_STREAM)
- goto e_inval;
+ break;
if (optlen < sizeof(int))
goto e_inval;
if (val > 255 || val < -1)
case IPV6_MULTICAST_LOOP:
if (optlen < sizeof(int))
goto e_inval;
+ if (val != valbool)
+ goto e_inval;
np->mc_loop = valbool;
retv = 0;
break;
case IPV6_MULTICAST_IF:
if (sk->sk_type == SOCK_STREAM)
- goto e_inval;
+ break;
if (optlen < sizeof(int))
goto e_inval;
if (sk->sk_protocol != IPPROTO_UDP &&
sk->sk_protocol != IPPROTO_UDPLITE &&
sk->sk_protocol != IPPROTO_TCP)
- return -EINVAL;
+ return -ENOPROTOOPT;
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
val = sk->sk_family;
return -EINVAL;
if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0)))
return -EFAULT;
+ if (gsf.gf_group.ss_family != AF_INET6)
+ return -EADDRNOTAVAIL;
lock_sock(sk);
err = ip6_mc_msfget(sk, &gsf,
(struct group_filter __user *)optval, optlen);
lock_sock(sk);
ip6_flush_pending_frames(sk);
release_sock(sk);
- return 0;
+
+ return inet6_destroy_sock(sk);
}
static int rawv6_init_sk(struct sock *sk)
.disconnect = udp_disconnect,
.ioctl = rawv6_ioctl,
.init = rawv6_init_sk,
- .destroy = inet6_destroy_sock,
.setsockopt = rawv6_setsockopt,
.getsockopt = rawv6_getsockopt,
.sendmsg = rawv6_sendmsg,
NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric);
- expires = (rt->rt6i_flags & RTF_EXPIRES) ?
- rt->rt6i_expires - jiffies : 0;
+ if (!(rt->rt6i_flags & RTF_EXPIRES))
+ expires = 0;
+ else if (rt->rt6i_expires - jiffies < INT_MAX)
+ expires = rt->rt6i_expires - jiffies;
+ else
+ expires = INT_MAX;
if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0,
expires, rt->u.dst.error) < 0)
}
-static int ipip6_tunnel_get_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
+static int ipip6_tunnel_get_prl(struct ip_tunnel *t,
+ struct ip_tunnel_prl __user *a)
{
- struct ip_tunnel_prl *kp;
+ struct ip_tunnel_prl kprl, *kp;
struct ip_tunnel_prl_entry *prl;
unsigned int cmax, c = 0, ca, len;
int ret = 0;
- cmax = a->datalen / sizeof(*a);
- if (cmax > 1 && a->addr != htonl(INADDR_ANY))
+ if (copy_from_user(&kprl, a, sizeof(kprl)))
+ return -EFAULT;
+ cmax = kprl.datalen / sizeof(kprl);
+ if (cmax > 1 && kprl.addr != htonl(INADDR_ANY))
cmax = 1;
/* For simple GET or for root users,
for (prl = t->prl; prl; prl = prl->next) {
if (c > cmax)
break;
- if (a->addr != htonl(INADDR_ANY) && prl->addr != a->addr)
+ if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr)
continue;
kp[c].addr = prl->addr;
kp[c].flags = prl->flags;
c++;
- if (a->addr != htonl(INADDR_ANY))
+ if (kprl.addr != htonl(INADDR_ANY))
break;
}
out:
read_unlock(&ipip6_lock);
len = sizeof(*kp) * c;
- ret = len ? copy_to_user(a->data, kp, len) : 0;
+ ret = 0;
+ if ((len && copy_to_user(a + 1, kp, len)) || put_user(len, &a->datalen))
+ ret = -EFAULT;
kfree(kp);
- if (ret)
- return -EFAULT;
- a->datalen = len;
- return 0;
+ return ret;
}
static int
break;
case SIOCGETPRL:
+ err = -EINVAL;
+ if (dev == sitn->fb_tunnel_dev)
+ goto done;
+ err = -ENOENT;
+ if (!(t = netdev_priv(dev)))
+ goto done;
+ err = ipip6_tunnel_get_prl(t, ifr->ifr_ifru.ifru_data);
+ break;
+
case SIOCADDPRL:
case SIOCDELPRL:
case SIOCCHGPRL:
err = -EPERM;
- if (cmd != SIOCGETPRL && !capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
goto done;
err = -EINVAL;
if (dev == sitn->fb_tunnel_dev)
goto done;
switch (cmd) {
- case SIOCGETPRL:
- err = ipip6_tunnel_get_prl(t, &prl);
- if (!err && copy_to_user(ifr->ifr_ifru.ifru_data,
- &prl, sizeof(prl)))
- err = -EFAULT;
- break;
case SIOCDELPRL:
err = ipip6_tunnel_del_prl(t, &prl);
break;
err = ipip6_tunnel_add_prl(t, &prl, cmd == SIOCCHGPRL);
break;
}
- if (cmd != SIOCGETPRL)
- netdev_state_change(dev);
+ netdev_state_change(dev);
break;
default:
ireq = inet_rsk(req);
ireq6 = inet6_rsk(req);
treq = tcp_rsk(req);
- ireq6->pktopts = NULL;
if (security_inet_conn_request(sk, skb, req)) {
reqsk_free(req);
treq = inet6_rsk(req);
ipv6_addr_copy(&treq->rmt_addr, &ipv6_hdr(skb)->saddr);
ipv6_addr_copy(&treq->loc_addr, &ipv6_hdr(skb)->daddr);
- treq->pktopts = NULL;
if (!want_cookie)
TCP_ECN_create_request(req, tcp_hdr(skb));
static int pfkey_send_notify(struct xfrm_state *x, struct km_event *c)
{
+ if (atomic_read(&pfkey_socks_nr) == 0)
+ return 0;
+
switch (c->event) {
case XFRM_MSG_EXPIRE:
return key_notify_sa_expire(x, c);
/* ieee80211_ioctl.c */
-int ieee80211_set_freq(struct ieee80211_local *local, int freq);
+int ieee80211_set_freq(struct net_device *dev, int freq);
/* ieee80211_sta.c */
void ieee80211_sta_timer(unsigned long data);
void ieee80211_sta_work(struct work_struct *work);
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.state = IEEE80211_DISABLED;
+ memset(sdata->u.sta.bssid, 0, ETH_ALEN);
del_timer_sync(&sdata->u.sta.timer);
/*
* When we get here, the interface is marked down.
#define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
#define IEEE80211_SCAN_INTERVAL (2 * HZ)
#define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ)
-#define IEEE80211_IBSS_JOIN_TIMEOUT (20 * HZ)
+#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ)
#define IEEE80211_PROBE_DELAY (HZ / 33)
#define IEEE80211_CHANNEL_TIME (HZ / 33)
u8 *pos;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
+ union iwreq_data wrqu;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
sdata->drop_unencrypted = bss->capability &
WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- res = ieee80211_set_freq(local, bss->freq);
+ res = ieee80211_set_freq(dev, bss->freq);
- if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) {
- printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
- "%d MHz\n", dev->name, local->oper_channel->center_freq);
- return -1;
- }
+ if (res)
+ return res;
/* Set beacon template */
skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
+ memset(&wrqu, 0, sizeof(wrqu));
+ memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+
return res;
}
spin_unlock_bh(&local->sta_bss_lock);
if (selected) {
- ieee80211_set_freq(local, selected->freq);
+ ieee80211_set_freq(dev, selected->freq);
if (!(ifsta->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(dev, selected->ssid,
selected->ssid_len);
ieee80211_tx_handler *handler;
struct ieee80211_tx_data tx;
ieee80211_tx_result res = TX_DROP, res_prepare;
- int ret, i;
+ int ret, i, retries = 0;
WARN_ON(__ieee80211_queue_pending(local, control->queue));
if (!__ieee80211_queue_stopped(local, control->queue)) {
clear_bit(IEEE80211_LINK_STATE_PENDING,
&local->state[control->queue]);
+ retries++;
+ /*
+ * Driver bug, it's rejecting packets but
+ * not stopping queues.
+ */
+ if (WARN_ON_ONCE(retries > 5))
+ goto drop;
goto retry;
}
memcpy(&store->control, control,
* be cloned. This could happen, e.g., with Linux bridge code passing
* us broadcast frames. */
- if (head_need > 0 || skb_header_cloned(skb)) {
+ if (head_need > 0 || skb_cloned(skb)) {
#if 0
printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes "
"of headroom\n", dev->name, head_need);
#endif
- if (skb_header_cloned(skb))
+ if (skb_cloned(skb))
I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
else
I802_DEBUG_INC(local->tx_expand_skb_head);
return 0;
}
-int ieee80211_set_freq(struct ieee80211_local *local, int freqMHz)
+int ieee80211_set_freq(struct net_device *dev, int freqMHz)
{
int ret = -EINVAL;
struct ieee80211_channel *chan;
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
+ if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
+ chan->flags & IEEE80211_CHAN_NO_IBSS) {
+ printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
+ "%d MHz\n", dev->name, chan->center_freq);
+ return ret;
+ }
local->oper_channel = chan;
if (local->sta_sw_scanning || local->sta_hw_scanning)
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA)
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
- return ieee80211_set_freq(local,
+ return ieee80211_set_freq(dev,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div > 0)
- return ieee80211_set_freq(local, freq->m / div);
+ return ieee80211_set_freq(dev, freq->m / div);
else
return -EINVAL;
}
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+ if (sdata->u.sta.state == IEEE80211_ASSOCIATED ||
+ sdata->u.sta.state == IEEE80211_IBSS_JOINED) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
return 0;
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "allocated aggregation queue"
- " %d tid %d addr %s pool=0x%lX",
+ " %d tid %d addr %s pool=0x%lX\n",
i, tid, print_mac(mac, sta->addr),
q->qdisc_pool[0]);
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (l4proto && l4proto->destroy)
l4proto->destroy(ct);
- nf_ct_ext_destroy(ct);
-
rcu_read_unlock();
spin_lock_bh(&nf_conntrack_lock);
void nf_conntrack_free(struct nf_conn *ct)
{
+ nf_ct_ext_destroy(ct);
call_rcu(&ct->rcu, nf_conntrack_free_rcu);
}
EXPORT_SYMBOL_GPL(nf_conntrack_free);
if (!*ext)
return NULL;
+ INIT_RCU_HEAD(&(*ext)->rcu);
(*ext)->offset[id] = off;
(*ext)->len = len;
return (void *)(*ext) + off;
}
+static void __nf_ct_ext_free_rcu(struct rcu_head *head)
+{
+ struct nf_ct_ext *ext = container_of(head, struct nf_ct_ext, rcu);
+ kfree(ext);
+}
+
void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
{
struct nf_ct_ext *new;
(void *)ct->ext + ct->ext->offset[i]);
rcu_read_unlock();
}
- kfree(ct->ext);
+ call_rcu(&ct->ext->rcu, __nf_ct_ext_free_rcu);
ct->ext = new;
}
static struct nf_conntrack_helper nf_conntrack_helper_h245 __read_mostly = {
.name = "H.245",
.me = THIS_MODULE,
+ .tuple.src.l3num = AF_UNSPEC,
.tuple.dst.protonum = IPPROTO_UDP,
.help = h245_help,
.expect_policy = &h245_exp_policy,
nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]);
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]);
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]);
+ nf_conntrack_helper_unregister(&nf_conntrack_helper_h245);
kfree(h323_buffer);
pr_debug("nf_ct_h323: fini\n");
}
h323_buffer = kmalloc(65536, GFP_KERNEL);
if (!h323_buffer)
return -ENOMEM;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_h245);
if (ret < 0)
goto err1;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]);
if (ret < 0)
goto err2;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]);
if (ret < 0)
goto err3;
- ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]);
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]);
if (ret < 0)
goto err4;
+ ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]);
+ if (ret < 0)
+ goto err5;
pr_debug("nf_ct_h323: init success\n");
return 0;
-err4:
+err5:
nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]);
-err3:
+err4:
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]);
-err2:
+err3:
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]);
+err2:
+ nf_conntrack_helper_unregister(&nf_conntrack_helper_h245);
err1:
+ kfree(h323_buffer);
return ret;
}
vsnprintf(prefix, sizeof(prefix), fmt, args);
va_end(args);
logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix);
- } else if (net_ratelimit()) {
- printk(KERN_WARNING "nf_log_packet: can\'t log since "
- "no backend logging module loaded in! Please either "
- "load one, or disable logging explicitly\n");
}
rcu_read_unlock();
}
if (ops->dumpit == NULL)
return -EOPNOTSUPP;
- return netlink_dump_start(genl_sock, skb, nlh,
- ops->dumpit, ops->done);
+ genl_unlock();
+ err = netlink_dump_start(genl_sock, skb, nlh,
+ ops->dumpit, ops->done);
+ genl_lock();
+ return err;
}
if (ops->doit == NULL)
int chains_to_skip = cb->args[0];
int fams_to_skip = cb->args[1];
- if (chains_to_skip != 0)
- genl_lock();
-
for (i = 0; i < GENL_FAM_TAB_SIZE; i++) {
if (i < chains_to_skip)
continue;
}
errout:
- if (chains_to_skip != 0)
- genl_unlock();
-
cb->args[0] = i;
cb->args[1] = n;
/* we'll bump the group number right afterwards */
genl_sock = netlink_kernel_create(&init_net, NETLINK_GENERIC, 0,
- genl_rcv, NULL, THIS_MODULE);
+ genl_rcv, &genl_mutex, THIS_MODULE);
if (genl_sock == NULL)
panic("GENL: Cannot initialize generic netlink\n");
* $Id: sch_htb.c,v 1.25 2003/12/07 11:08:25 devik Exp devik $
*/
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
*/
#define HTB_HSIZE 16 /* classid hash size */
-#define HTB_HYSTERESIS 1 /* whether to use mode hysteresis for speedup */
+static int htb_hysteresis __read_mostly = 0; /* whether to use mode hysteresis for speedup */
#define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */
#if HTB_VER >> 16 != TC_HTB_PROTOVER
#error "Mismatched sch_htb.c and pkt_sch.h"
#endif
+/* Module parameter and sysfs export */
+module_param (htb_hysteresis, int, 0640);
+MODULE_PARM_DESC(htb_hysteresis, "Hysteresis mode, less CPU load, less accurate");
+
/* used internaly to keep status of single class */
enum htb_cmode {
HTB_CANT_SEND, /* class can't send and can't borrow */
htb_remove_class_from_row(q, cl, mask);
}
-#if HTB_HYSTERESIS
static inline long htb_lowater(const struct htb_class *cl)
{
- return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0;
+ if (htb_hysteresis)
+ return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0;
+ else
+ return 0;
}
static inline long htb_hiwater(const struct htb_class *cl)
{
- return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0;
+ if (htb_hysteresis)
+ return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0;
+ else
+ return 0;
}
-#else
-#define htb_lowater(cl) (0)
-#define htb_hiwater(cl) (0)
-#endif
+
/**
* htb_class_mode - computes and returns current class mode
void sctp_assoc_set_primary(struct sctp_association *asoc,
struct sctp_transport *transport)
{
+ int changeover = 0;
+
+ /* it's a changeover only if we already have a primary path
+ * that we are changing
+ */
+ if (asoc->peer.primary_path != NULL &&
+ asoc->peer.primary_path != transport)
+ changeover = 1 ;
+
asoc->peer.primary_path = transport;
/* Set a default msg_name for events. */
* double switch to the same destination address.
*/
if (transport->cacc.changeover_active)
- transport->cacc.cycling_changeover = 1;
+ transport->cacc.cycling_changeover = changeover;
/* 2) The sender MUST set CHANGEOVER_ACTIVE to indicate that
* a changeover has occurred.
*/
- transport->cacc.changeover_active = 1;
+ transport->cacc.changeover_active = changeover;
/* 3) The sender MUST store the next TSN to be sent in
* next_tsn_at_change.
}
if (sctp_snmp_proc_init())
- goto out_nomem;
+ goto out_snmp_proc_init;
if (sctp_eps_proc_init())
- goto out_nomem;
+ goto out_eps_proc_init;
if (sctp_assocs_proc_init())
- goto out_nomem;
+ goto out_assocs_proc_init;
return 0;
+out_assocs_proc_init:
+ sctp_eps_proc_exit();
+out_eps_proc_init:
+ sctp_snmp_proc_exit();
+out_snmp_proc_init:
+ if (proc_net_sctp) {
+ proc_net_sctp = NULL;
+ remove_proc_entry("sctp", init_net.proc_net);
+ }
out_nomem:
return -ENOMEM;
}
if (copy_from_user(&getaddrs, optval, len))
return -EFAULT;
- if (getaddrs.addr_num <= 0) return -EINVAL;
+ if (getaddrs.addr_num <= 0 ||
+ getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr)))
+ return -EINVAL;
/*
* For UDP-style sockets, id specifies the association to query.
* If the id field is set to the value '0' then the locally bound
return (unix_peer(osk) == NULL || unix_our_peer(sk, osk));
}
+static inline int unix_recvq_full(struct sock const *sk)
+{
+ return skb_queue_len(&sk->sk_receive_queue) > sk->sk_max_ack_backlog;
+}
+
static struct sock *unix_peer_get(struct sock *s)
{
struct sock *peer;
static int unix_accept(struct socket *, struct socket *, int);
static int unix_getname(struct socket *, struct sockaddr *, int *, int);
static unsigned int unix_poll(struct file *, struct socket *, poll_table *);
+static unsigned int unix_datagram_poll(struct file *, struct socket *,
+ poll_table *);
static int unix_ioctl(struct socket *, unsigned int, unsigned long);
static int unix_shutdown(struct socket *, int);
static int unix_stream_sendmsg(struct kiocb *, struct socket *,
.socketpair = unix_socketpair,
.accept = sock_no_accept,
.getname = unix_getname,
- .poll = datagram_poll,
+ .poll = unix_datagram_poll,
.ioctl = unix_ioctl,
.listen = sock_no_listen,
.shutdown = unix_shutdown,
.socketpair = unix_socketpair,
.accept = unix_accept,
.getname = unix_getname,
- .poll = datagram_poll,
+ .poll = unix_datagram_poll,
.ioctl = unix_ioctl,
.listen = unix_listen,
.shutdown = unix_shutdown,
sched = !sock_flag(other, SOCK_DEAD) &&
!(other->sk_shutdown & RCV_SHUTDOWN) &&
- (skb_queue_len(&other->sk_receive_queue) >
- other->sk_max_ack_backlog);
+ unix_recvq_full(other);
unix_state_unlock(other);
if (other->sk_state != TCP_LISTEN)
goto out_unlock;
- if (skb_queue_len(&other->sk_receive_queue) >
- other->sk_max_ack_backlog) {
+ if (unix_recvq_full(other)) {
err = -EAGAIN;
if (!timeo)
goto out_unlock;
goto out_unlock;
}
- if (unix_peer(other) != sk &&
- (skb_queue_len(&other->sk_receive_queue) >
- other->sk_max_ack_backlog)) {
+ if (unix_peer(other) != sk && unix_recvq_full(other)) {
if (!timeo) {
err = -EAGAIN;
goto out_unlock;
return mask;
}
+static unsigned int unix_datagram_poll(struct file *file, struct socket *sock,
+ poll_table *wait)
+{
+ struct sock *sk = sock->sk, *peer;
+ unsigned int mask;
+
+ poll_wait(file, sk->sk_sleep, wait);
+
+ peer = unix_peer_get(sk);
+ if (peer) {
+ if (peer != sk) {
+ /*
+ * Writability of a connected socket additionally
+ * depends on the state of the receive queue of the
+ * peer.
+ */
+ poll_wait(file, &unix_sk(peer)->peer_wait, wait);
+ } else {
+ sock_put(peer);
+ peer = NULL;
+ }
+ }
+
+ mask = 0;
+
+ /* exceptional events? */
+ if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue))
+ mask |= POLLERR;
+ if (sk->sk_shutdown & RCV_SHUTDOWN)
+ mask |= POLLRDHUP;
+ if (sk->sk_shutdown == SHUTDOWN_MASK)
+ mask |= POLLHUP;
+
+ /* readable? */
+ if (!skb_queue_empty(&sk->sk_receive_queue) ||
+ (sk->sk_shutdown & RCV_SHUTDOWN))
+ mask |= POLLIN | POLLRDNORM;
+
+ /* Connection-based need to check for termination and startup */
+ if (sk->sk_type == SOCK_SEQPACKET) {
+ if (sk->sk_state == TCP_CLOSE)
+ mask |= POLLHUP;
+ /* connection hasn't started yet? */
+ if (sk->sk_state == TCP_SYN_SENT)
+ return mask;
+ }
+
+ /* writable? */
+ if (unix_writable(sk) && !(peer && unix_recvq_full(peer)))
+ mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+ else
+ set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags);
+
+ if (peer)
+ sock_put(peer);
+
+ return mask;
+}
#ifdef CONFIG_PROC_FS
static struct sock *first_unix_socket(int *i)
release_file(info->hdr, info->size);
}
+static int ignore_undef_symbol(struct elf_info *info, const char *symname)
+{
+ /* ignore __this_module, it will be resolved shortly */
+ if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
+ return 1;
+ /* ignore global offset table */
+ if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0)
+ return 1;
+ if (info->hdr->e_machine == EM_PPC)
+ /* Special register function linked on all modules during final link of .ko */
+ if (strncmp(symname, "_restgpr_", sizeof("_restgpr_") - 1) == 0 ||
+ strncmp(symname, "_savegpr_", sizeof("_savegpr_") - 1) == 0 ||
+ strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 ||
+ strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0)
+ return 1;
+ /* Do not ignore this symbol */
+ return 0;
+}
+
#define CRC_PFX MODULE_SYMBOL_PREFIX "__crc_"
#define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_"
if (ELF_ST_BIND(sym->st_info) != STB_GLOBAL &&
ELF_ST_BIND(sym->st_info) != STB_WEAK)
break;
- /* ignore global offset table */
- if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0)
- break;
- /* ignore __this_module, it will be resolved shortly */
- if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
+ if (ignore_undef_symbol(info, symname))
break;
/* cope with newer glibc (2.3.4 or higher) STT_ definition in elf.h */
#if defined(STT_REGISTER) || defined(STT_SPARC_REGISTER)
#include <linux/hugetlb.h>
#include <linux/ptrace.h>
#include <linux/file.h>
+#include <linux/prctl.h>
+#include <linux/securebits.h>
static int dummy_ptrace (struct task_struct *parent, struct task_struct *child)
{
static int dummy_task_prctl (int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5, long *rc_p)
{
- return 0;
+ switch (option) {
+ case PR_CAPBSET_READ:
+ *rc_p = (cap_valid(arg2) ? 1 : -EINVAL);
+ break;
+ case PR_GET_KEEPCAPS:
+ *rc_p = issecure(SECURE_KEEP_CAPS);
+ break;
+ case PR_SET_KEEPCAPS:
+ if (arg2 > 1)
+ *rc_p = -EINVAL;
+ else if (arg2)
+ current->securebits |= issecure_mask(SECURE_KEEP_CAPS);
+ else
+ current->securebits &=
+ ~issecure_mask(SECURE_KEEP_CAPS);
+ break;
+ default:
+ return 0;
+ }
+
+ return 1;
}
static void dummy_task_reparent_to_init (struct task_struct *p)
static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
{
unsigned char *val = chip->saved_regs;
- snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return);
+ snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return);
for (; num_regs; num_regs--)
*val++ = snd_sbmixer_read(chip, *regs++);
}
static void restore_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs)
{
unsigned char *val = chip->saved_regs;
- snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return);
+ snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return);
for (; num_regs; num_regs--)
snd_sbmixer_write(chip, *regs++, *val++);
}
return -ENOMEM;
}
+ /* (2) initialization of the chip hardware */
+ snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt);
if (request_irq(pci->irq, snd_aw2_saa7146_interrupt,
IRQF_SHARED, "Audiowerk2", chip)) {
}
chip->irq = pci->irq;
- /* (2) initialization of the chip hardware */
- snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt);
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
free_irq(chip->irq, (void *)chip);
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
};
/* mute/unmute internal speaker according to the hp jack and mute state */
for (i = 0; i < count; ++i) {
template = controls[i];
- err = chip->model->control_filter(&template);
- if (err < 0)
- return err;
- if (err == 1)
- continue;
+ if (chip->model->control_filter) {
+ err = chip->model->control_filter(&template);
+ if (err < 0)
+ return err;
+ if (err == 1)
+ continue;
+ }
if (!strcmp(template.name, "Master Playback Volume") &&
chip->model->dac_tlv) {
template.tlv.p = chip->model->dac_tlv;
#else
#define ioapic_debug(fmt, arg...)
#endif
-static void ioapic_deliver(struct kvm_ioapic *vioapic, int irq);
+static int ioapic_deliver(struct kvm_ioapic *vioapic, int irq);
static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
unsigned long addr,
pent = &ioapic->redirtbl[idx];
if (!pent->fields.mask) {
- ioapic_deliver(ioapic, idx);
- if (pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
+ int injected = ioapic_deliver(ioapic, idx);
+ if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
pent->fields.remote_irr = 1;
}
if (!pent->fields.trig_mode)
}
}
-static void ioapic_inj_irq(struct kvm_ioapic *ioapic,
+static int ioapic_inj_irq(struct kvm_ioapic *ioapic,
struct kvm_vcpu *vcpu,
u8 vector, u8 trig_mode, u8 delivery_mode)
{
ASSERT((delivery_mode == IOAPIC_FIXED) ||
(delivery_mode == IOAPIC_LOWEST_PRIORITY));
- kvm_apic_set_irq(vcpu, vector, trig_mode);
+ return kvm_apic_set_irq(vcpu, vector, trig_mode);
}
static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
return mask;
}
-static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
+static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
{
u8 dest = ioapic->redirtbl[irq].fields.dest_id;
u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode;
u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode;
u32 deliver_bitmask;
struct kvm_vcpu *vcpu;
- int vcpu_id;
+ int vcpu_id, r = 0;
ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x "
"vector=%x trig_mode=%x\n",
deliver_bitmask = ioapic_get_delivery_bitmask(ioapic, dest, dest_mode);
if (!deliver_bitmask) {
ioapic_debug("no target on destination\n");
- return;
+ return 0;
}
switch (delivery_mode) {
vcpu = ioapic->kvm->vcpus[0];
#endif
if (vcpu != NULL)
- ioapic_inj_irq(ioapic, vcpu, vector,
+ r = ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
else
ioapic_debug("null lowest prio vcpu: "
deliver_bitmask &= ~(1 << vcpu_id);
vcpu = ioapic->kvm->vcpus[vcpu_id];
if (vcpu) {
- ioapic_inj_irq(ioapic, vcpu, vector,
+ r = ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
}
}
delivery_mode);
break;
}
+ return r;
}
void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
}
}
-static int get_eoi_gsi(struct kvm_ioapic *ioapic, int vector)
+static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int gsi)
{
- int i;
-
- for (i = 0; i < IOAPIC_NUM_PINS; i++)
- if (ioapic->redirtbl[i].fields.vector == vector)
- return i;
- return -1;
-}
-
-void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
-{
- struct kvm_ioapic *ioapic = kvm->arch.vioapic;
union ioapic_redir_entry *ent;
- int gsi;
-
- gsi = get_eoi_gsi(ioapic, vector);
- if (gsi == -1) {
- printk(KERN_WARNING "Can't find redir item for %d EOI\n",
- vector);
- return;
- }
ent = &ioapic->redirtbl[gsi];
ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG);
ioapic_deliver(ioapic, gsi);
}
+void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)
+{
+ struct kvm_ioapic *ioapic = kvm->arch.vioapic;
+ int i;
+
+ for (i = 0; i < IOAPIC_NUM_PINS; i++)
+ if (ioapic->redirtbl[i].fields.vector == vector)
+ __kvm_ioapic_update_eoi(ioapic, i);
+}
+
static int ioapic_in_range(struct kvm_io_device *this, gpa_t addr)
{
struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private;