E: zab@zabbo.net
D: maestro pci sound
+M: David Brownell
+D: Kernel engineer, mentor, and friend. Maintained USB EHCI and
+D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
+D: device drivers. His encouragement also helped many engineers get
+D: started working on the Linux kernel. David passed away in early
+D: 2011, and will be greatly missed.
+W: https://lkml.org/lkml/2011/4/5/36
+
N: Gary Brubaker
E: xavyer@ix.netcom.com
D: USB Serial Empeg Empeg-car Mark I/II Driver
--- /dev/null
+What: /sys/class/backlight/<backlight>/<ambient light zone>_max
+What: /sys/class/backlight/<backlight>/l1_daylight_max
+What: /sys/class/backlight/<backlight>/l2_bright_max
+What: /sys/class/backlight/<backlight>/l3_office_max
+What: /sys/class/backlight/<backlight>/l4_indoor_max
+What: /sys/class/backlight/<backlight>/l5_dark_max
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the maximum brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127. This file
+ will also show the brightness level stored for this
+ <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/<ambient light zone>_dim
+What: /sys/class/backlight/<backlight>/l2_bright_dim
+What: /sys/class/backlight/<backlight>/l3_office_dim
+What: /sys/class/backlight/<backlight>/l4_indoor_dim
+What: /sys/class/backlight/<backlight>/l5_dark_dim
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the dim brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127, typically
+ set to 0. Full off when the backlight is disabled.
+ This file will also show the dim brightness level stored for
+ this <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/ambient_light_level
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get conversion value of the light sensor.
+ This value is updated every 80 ms (when the light sensor
+ is enabled). Returns integer between 0 (dark) and
+ 8000 (max ambient brightness)
+
+What: /sys/class/backlight/<backlight>/ambient_light_zone
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get/Set current ambient light zone. Reading returns
+ integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+ Writing a value between 1..5 forces the backlight controller
+ to enter the corresponding ambient light zone.
+ Writing 0 returns to normal/automatic ambient light level
+ operation. The ambient light sensing feature on these devices
+ is an extension to the API documented in
+ Documentation/ABI/stable/sysfs-class-backlight.
+ It can be enabled by writing the value stored in
+ /sys/class/backlight/<backlight>/max_brightness to
+ /sys/class/backlight/<backlight>/brightness.
\ No newline at end of file
To extract cgroup statistics a utility very similar to getdelays.c
has been developed, the sample output of the utility is shown below
-~/balbir/cgroupstats # ./getdelays -C "/cgroup/a"
+~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a"
sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays -C "/cgroup"
+~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup"
sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
- Enable group scheduling in CFQ
CONFIG_CFQ_GROUP_IOSCHED=y
-- Compile and boot into kernel and mount IO controller (blkio).
+- Compile and boot into kernel and mount IO controller (blkio); see
+ cgroups.txt, Why are cgroups needed?.
- mount -t cgroup -o blkio none /cgroup
+ mount -t tmpfs cgroup_root /sys/fs/cgroup
+ mkdir /sys/fs/cgroup/blkio
+ mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Create two cgroups
- mkdir -p /cgroup/test1/ /cgroup/test2
+ mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
- Set weights of group test1 and test2
- echo 1000 > /cgroup/test1/blkio.weight
- echo 500 > /cgroup/test2/blkio.weight
+ echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
+ echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
- Create two same size files (say 512MB each) on same disk (file1, file2) and
launch two dd threads in different cgroup to read those files.
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/sdb/zerofile1 of=/dev/null &
- echo $! > /cgroup/test1/tasks
- cat /cgroup/test1/tasks
+ echo $! > /sys/fs/cgroup/blkio/test1/tasks
+ cat /sys/fs/cgroup/blkio/test1/tasks
dd if=/mnt/sdb/zerofile2 of=/dev/null &
- echo $! > /cgroup/test2/tasks
- cat /cgroup/test2/tasks
+ echo $! > /sys/fs/cgroup/blkio/test2/tasks
+ cat /sys/fs/cgroup/blkio/test2/tasks
- At macro level, first dd should finish first. To get more precise data, keep
on looking at (with the help of script), at blkio.disk_time and
- Enable throttling in block layer
CONFIG_BLK_DEV_THROTTLING=y
-- Mount blkio controller
- mount -t cgroup -o blkio none /cgroup/blkio
+- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
+ mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Specify a bandwidth rate on particular device for root group. The format
for policy is "<major>:<minor> <byes_per_second>".
- echo "8:16 1048576" > /cgroup/blkio/blkio.read_bps_device
+ echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
Above will put a limit of 1MB/second on reads happening for root group
on device having major/minor number 8:16.
CFQ and throttling will practically treat all groups at same level.
pivot
- / | \ \
+ / / \ \
root test1 test2 test3
Down the line we can implement hierarchical accounting/control support
Following is the format.
- #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+ # echo dev_maj:dev_minor weight > blkio.weight_device
Configure weight=300 on /dev/sdb (8:16) in this cgroup
# echo 8:16 300 > blkio.weight_device
# cat blkio.weight_device
the admin can easily set up a script which receives exec notifications
and depending on who is launching the browser he can
- # echo browser_pid > /mnt/<restype>/<userclass>/tasks
+ # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
With only a single hierarchy, he now would potentially have to create
a separate cgroup for every browser launched and associate it with
-approp network and other resource class. This may lead to
+appropriate network and other resource class. This may lead to
proliferation of such cgroups.
Also lets say that the administrator would like to give enhanced network
With ability to write pids directly to resource classes, it's just a
matter of :
- # echo pid > /mnt/network/<new_class>/tasks
+ # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
(after some time)
- # echo pid > /mnt/network/<orig_class>/tasks
+ # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
Without this ability, he would have to split the cgroup into
multiple separate ones and then associate the new cgroups with the
To start a new job that is to be contained within a cgroup, using
the "cpuset" cgroup subsystem, the steps are something like:
- 1) mkdir /dev/cgroup
- 2) mount -t cgroup -ocpuset cpuset /dev/cgroup
- 3) Create the new cgroup by doing mkdir's and write's (or echo's) in
- the /dev/cgroup virtual file system.
- 4) Start a task that will be the "founding father" of the new job.
- 5) Attach that task to the new cgroup by writing its pid to the
- /dev/cgroup tasks file for that cgroup.
- 6) fork, exec or clone the job tasks from this founding father task.
+ 1) mount -t tmpfs cgroup_root /sys/fs/cgroup
+ 2) mkdir /sys/fs/cgroup/cpuset
+ 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ 4) Create the new cgroup by doing mkdir's and write's (or echo's) in
+ the /sys/fs/cgroup virtual file system.
+ 5) Start a task that will be the "founding father" of the new job.
+ 6) Attach that task to the new cgroup by writing its pid to the
+ /sys/fs/cgroup/cpuset/tasks file for that cgroup.
+ 7) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cgroup
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cgroup:
- mount -t cgroup cpuset -ocpuset /dev/cgroup
- cd /dev/cgroup
+ mount -t tmpfs cgroup_root /sys/fs/cgroup
+ mkdir /sys/fs/cgroup/cpuset
+ mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
+ cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
virtual filesystem.
To mount a cgroup hierarchy with all available subsystems, type:
-# mount -t cgroup xxx /dev/cgroup
+# mount -t cgroup xxx /sys/fs/cgroup
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
if cpusets are enabled the user will have to populate the cpus and mems files
for each new cgroup created before that group can be used.
+As explained in section `1.2 Why are cgroups needed?' you should create
+different hierarchies of cgroups for each single resource or group of
+resources you want to control. Therefore, you should mount a tmpfs on
+/sys/fs/cgroup and create directories for each cgroup resource or resource
+group.
+
+# mount -t tmpfs cgroup_root /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/rg1
+
To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
-# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
+# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
To change the set of subsystems bound to a mounted hierarchy, just
remount with different options:
-# mount -o remount,cpuset,blkio hier1 /dev/cgroup
+# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1
Now memory is removed from the hierarchy and blkio is added.
Note this will add blkio to the hierarchy but won't remove memory or
cpuset, because the new options are appended to the old ones:
-# mount -o remount,blkio /dev/cgroup
+# mount -o remount,blkio /sys/fs/cgroup/rg1
To Specify a hierarchy's release_agent:
# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
- xxx /dev/cgroup
+ xxx /sys/fs/cgroup/rg1
Note that specifying 'release_agent' more than once will return failure.
the ability to arbitrarily bind/unbind subsystems from an existing
cgroup hierarchy is intended to be implemented in the future.
-Then under /dev/cgroup you can find a tree that corresponds to the
-tree of the cgroups in the system. For instance, /dev/cgroup
+Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
+tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
is the cgroup that holds the whole system.
If you want to change the value of release_agent:
-# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
+# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
It can also be changed via remount.
-If you want to create a new cgroup under /dev/cgroup:
-# cd /dev/cgroup
+If you want to create a new cgroup under /sys/fs/cgroup/rg1:
+# cd /sys/fs/cgroup/rg1
# mkdir my_cgroup
Now you want to do something with this cgroup.
Accounting groups can be created by first mounting the cgroup filesystem.
-# mkdir /cgroups
-# mount -t cgroup -ocpuacct none /cgroups
-
-With the above step, the initial or the parent accounting group
-becomes visible at /cgroups. At bootup, this group includes all the
-tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
-/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
-this group which is essentially the CPU time obtained by all the tasks
+# mount -t cgroup -ocpuacct none /sys/fs/cgroup
+
+With the above step, the initial or the parent accounting group becomes
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
+/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
+by this group which is essentially the CPU time obtained by all the tasks
in the system.
-New accounting groups can be created under the parent group /cgroups.
+New accounting groups can be created under the parent group /sys/fs/cgroup.
-# cd /cgroups
+# cd /sys/fs/cgroup
# mkdir g1
# echo $$ > g1
The above steps create a new group g1 and move the current shell
process (bash) into it. CPU time consumed by this bash and its children
can be obtained from g1/cpuacct.usage and the same is accumulated in
-/cgroups/cpuacct.usage also.
+/sys/fs/cgroup/cpuacct.usage also.
cpuacct.stat file lists a few statistics which further divide the
CPU time obtained by the cgroup into user and system times. Currently
To start a new job that is to be contained within a cpuset, the steps are:
- 1) mkdir /dev/cpuset
- 2) mount -t cgroup -ocpuset cpuset /dev/cpuset
+ 1) mkdir /sys/fs/cgroup/cpuset
+ 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
3) Create the new cpuset by doing mkdir's and write's (or echo's) in
- the /dev/cpuset virtual file system.
+ the /sys/fs/cgroup/cpuset virtual file system.
4) Start a task that will be the "founding father" of the new job.
5) Attach that task to the new cpuset by writing its pid to the
- /dev/cpuset tasks file for that cpuset.
+ /sys/fs/cgroup/cpuset tasks file for that cpuset.
6) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cpuset
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cpuset:
- mount -t cgroup -ocpuset cpuset /dev/cpuset
- cd /dev/cpuset
+ mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
virtual filesystem.
To mount it, type:
-# mount -t cgroup -o cpuset cpuset /dev/cpuset
+# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
-Then under /dev/cpuset you can find a tree that corresponds to the
-tree of the cpusets in the system. For instance, /dev/cpuset
+Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
+tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
is the cpuset that holds the whole system.
-If you want to create a new cpuset under /dev/cpuset:
-# cd /dev/cpuset
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
+# cd /sys/fs/cgroup/cpuset
# mkdir my_cpuset
Now you want to do something with this cpuset.
The command
-mount -t cpuset X /dev/cpuset
+mount -t cpuset X /sys/fs/cgroup/cpuset
is equivalent to
-mount -t cgroup -ocpuset,noprefix X /dev/cpuset
-echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
+mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
+echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
2.2 Adding/removing cpus
------------------------
An entry is added using devices.allow, and removed using
devices.deny. For instance
- echo 'c 1:3 mr' > /cgroups/1/devices.allow
+ echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
allows cgroup 1 to read and mknod the device usually known as
/dev/null. Doing
- echo a > /cgroups/1/devices.deny
+ echo a > /sys/fs/cgroup/1/devices.deny
will remove the default 'a *:* rwm' entry. Doing
- echo a > /cgroups/1/devices.allow
+ echo a > /sys/fs/cgroup/1/devices.allow
will add the 'a *:* rwm' entry to the whitelist.
* Examples of usage :
- # mkdir /containers
- # mount -t cgroup -ofreezer freezer /containers
- # mkdir /containers/0
- # echo $some_pid > /containers/0/tasks
+ # mkdir /sys/fs/cgroup/freezer
+ # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
+ # mkdir /sys/fs/cgroup/freezer/0
+ # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
to get status of the freezer subsystem :
- # cat /containers/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
to freeze all tasks in the container :
- # echo FROZEN > /containers/0/freezer.state
- # cat /containers/0/freezer.state
+ # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
FREEZING
- # cat /containers/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
- # echo THAWED > /containers/0/freezer.state
- # cat /containers/0/freezer.state
+ # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
This is the basic mechanism which should do the right thing for user space task
Memory Resource Controller
-NOTE: The Memory Resource Controller has been generically been referred
- to as the memory controller in this document. Do not confuse memory
- controller used here with the memory controller that is used in hardware.
+NOTE: The Memory Resource Controller has generically been referred to as the
+ memory controller in this document. Do not confuse memory controller
+ used here with the memory controller that is used in hardware.
(For editors)
In this document:
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate # set/show controls of moving charges
memory.oom_control # set/show oom controls.
+ memory.numa_stat # show the number of memory usage per numa node
1. History
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
-Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
+Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
OS point of view.
* What happens when a cgroup hits memory.memsw.limit_in_bytes
-When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
in this cgroup. Then, swap-out will not be done by cgroup routine and file
caches are dropped. But as mentioned above, global LRU can do swapout memory
from it for sanity of the system's memory management state. You can't forbid
c. Enable CONFIG_CGROUP_MEM_RES_CTLR
d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
-1. Prepare the cgroups
-# mkdir -p /cgroups
-# mount -t cgroup none /cgroups -o memory
+1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
+# mount -t tmpfs none /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/memory
+# mount -t cgroup none /sys/fs/cgroup/memory -o memory
2. Make the new group and move bash into it
-# mkdir /cgroups/0
-# echo $$ > /cgroups/0/tasks
+# mkdir /sys/fs/cgroup/memory/0
+# echo $$ > /sys/fs/cgroup/memory/0/tasks
Since now we're in the 0 cgroup, we can alter the memory limit:
-# echo 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
-# cat /cgroups/0/memory.limit_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
4194304
We can check the usage:
-# cat /cgroups/0/memory.usage_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
1216512
A successful write to this file does not guarantee a successful set of
If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
value in memory.stat(see 5.2).
+5.6 numa_stat
+
+This is similar to numa_maps but operates on a per-memcg basis. This is
+useful for providing visibility into the numa locality information within
+an memcg since the pages are allowed to be allocated from any physical
+node. One of the usecases is evaluating application performance by
+combining this information with the application's cpu allocation.
+
+We export "total", "file", "anon" and "unevictable" pages per-node for
+each memcg. The ouput format of memory.numa_stat is:
+
+total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+
+And we have total = file + anon + unevictable.
+
6. Hierarchy support
The memory controller supports a deep hierarchy and hierarchical accounting.
cgroup filesystem. Consider for example, the following cgroup filesystem
hierarchy
- root
+ root
/ | \
- / | \
- a b c
- | \
- | \
- d e
+ / | \
+ a b c
+ | \
+ | \
+ d e
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),
----------------------------
-What: namespace cgroup (ns_cgroup)
-When: 2.6.38
-Why: The ns_cgroup leads to some problems:
- * cgroup creation is out-of-control
- * cgroup name can conflict when pids are looping
- * it is not possible to have a single process handling
- a lot of namespaces without falling in a exponential creation time
- * we may want to create a namespace without creating a cgroup
-
- The ns_cgroup is replaced by a compatibility flag 'clone_children',
- where a newly created cgroup will copy the parent cgroup values.
- The userspace has to manually create a cgroup and add a task to
- the 'tasks' file.
-Who: Daniel Lezcano <daniel.lezcano@free.fr>
-
-----------------------------
-
What: iwlwifi disable_hw_scan module parameters
When: 2.6.40
Why: Hareware scan is the prefer method for iwlwifi devices for
TASKLET: 0 0 0 290
SCHED: 27035 26983 26971 26746
HRTIMER: 0 0 0 0
+ RCU: 1678 1769 2178 2250
1.3 IDE devices in /proc/ide
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
than 64 sectors = 32 KB at a time);
+ n = INITIAL_READ10 (force a retry of the
+ initial READ(10) command);
o = CAPACITY_OK (accept the capacity
reported by the device);
r = IGNORE_RESIDUE (the device reports
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
user-space applications.
-Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
+
+Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
+architectures.
Usage
-----
sync_min
sync_max
The two values, given as numbers of sectors, indicate a range
- withing the array where 'check'/'repair' will operate. Must be
+ within the array where 'check'/'repair' will operate. Must be
a multiple of chunk_size. When it reaches "sync_max" it will
pause, rather than complete.
You can use 'select' or 'poll' on "sync_completed" to wait for
size_t %zu or %zx
ssize_t %zd or %zx
-Raw pointer value SHOULD be printed with %p.
+Raw pointer value SHOULD be printed with %p. The kernel supports
+the following extended format specifiers for pointer types:
+
+Symbols/Function Pointers:
+
+ %pF versatile_init+0x0/0x110
+ %pf versatile_init
+ %pS versatile_init+0x0/0x110
+ %ps versatile_init
+ %pB prev_fn_of_versatile_init+0x88/0x88
+
+ For printing symbols and function pointers. The 'S' and 's' specifiers
+ result in the symbol name with ('S') or without ('s') offsets. Where
+ this is used on a kernel without KALLSYMS - the symbol address is
+ printed instead.
+
+ The 'B' specifier results in the symbol name with offsets and should be
+ used when printing stack backtraces. The specifier takes into
+ consideration the effect of compiler optimisations which may occur
+ when tail-call's are used and marked with the noreturn GCC attribute.
+
+ On ia64, ppc64 and parisc64 architectures function pointers are
+ actually function descriptors which must first be resolved. The 'F' and
+ 'f' specifiers perform this resolution and then provide the same
+ functionality as the 'S' and 's' specifiers.
+
+Kernel Pointers:
+
+ %pK 0x01234567 or 0x0123456789abcdef
+
+ For printing kernel pointers which should be hidden from unprivileged
+ users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+ Documentation/sysctl/kernel.txt for more details.
+
+Struct Resources:
+
+ %pr [mem 0x60000000-0x6fffffff flags 0x2200] or
+ [mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+ %pR [mem 0x60000000-0x6fffffff pref] or
+ [mem 0x0000000060000000-0x000000006fffffff pref]
+
+ For printing struct resources. The 'R' and 'r' specifiers result in a
+ printed resource with ('R') or without ('r') a decoded flags member.
+
+MAC/FDDI addresses:
+
+ %pM 00:01:02:03:04:05
+ %pMF 00-01-02-03-04-05
+ %pm 000102030405
+
+ For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
+ specifiers result in a printed address with ('M') or without ('m') byte
+ separators. The default byte separator is the colon (':').
+
+ Where FDDI addresses are concerned the 'F' specifier can be used after
+ the 'M' specifier to use dash ('-') separators instead of the default
+ separator.
+
+IPv4 addresses:
+
+ %pI4 1.2.3.4
+ %pi4 001.002.003.004
+ %p[Ii][hnbl]
+
+ For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
+ specifiers result in a printed address with ('i4') or without ('I4')
+ leading zeros.
+
+ The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
+ host, network, big or little endian order addresses respectively. Where
+ no specifier is provided the default network/big endian order is used.
+
+IPv6 addresses:
+
+ %pI6 0001:0002:0003:0004:0005:0006:0007:0008
+ %pi6 00010002000300040005000600070008
+ %pI6c 1:2:3:4:5:6:7:8
+
+ For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
+ specifiers result in a printed address with ('I6') or without ('i6')
+ colon-separators. Leading zeros are always used.
+
+ The additional 'c' specifier can be used with the 'I' specifier to
+ print a compressed IPv6 address as described by
+ http://tools.ietf.org/html/rfc5952
+
+UUID/GUID addresses:
+
+ %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f
+ %pUB 00010203-0405-0607-0809-0A0B0C0D0E0F
+ %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f
+ %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F
+
+ For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+ 'b' and 'B' specifiers are used to specify a little endian order in
+ lower ('l') or upper case ('L') hex characters - and big endian order
+ in lower ('b') or upper case ('B') hex characters.
+
+ Where no additional specifiers are used the default little endian
+ order with lower case hex characters will be printed.
+
+struct va_format:
+
+ %pV
+
+ For printing struct va_format structures. These contain a format string
+ and va_list as follows:
+
+ struct va_format {
+ const char *fmt;
+ va_list *va;
+ };
+
+ Do not use this feature without some mechanism to verify the
+ correctness of the format string and va_list arguments.
u64 SHOULD be printed with %llu/%llx, (unsigned long long):
Thank you for your cooperation and attention.
-By Randy Dunlap <rdunlap@xenotime.net>
+By Randy Dunlap <rdunlap@xenotime.net> and
+Andrew Murray <amurray@mpc-data.co.uk>
group created using the pseudo filesystem. See example steps below to create
task groups and modify their CPU share using the "cgroups" pseudo filesystem.
- # mkdir /dev/cpuctl
- # mount -t cgroup -ocpu none /dev/cpuctl
- # cd /dev/cpuctl
+ # mount -t tmpfs cgroup_root /sys/fs/cgroup
+ # mkdir /sys/fs/cgroup/cpu
+ # mount -t cgroup -ocpu none /sys/fs/cgroup/cpu
+ # cd /sys/fs/cgroup/cpu
# mkdir multimedia # create "multimedia" group of tasks
# mkdir browser # create "browser" group of tasks
Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
CPU bandwidth to task groups.
-This uses the /cgroup virtual file system and
-"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
-control group.
+This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
+to control the CPU time reserved for each control group.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
===============
There is work in progress to make the scheduling period for each group
-("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
+("<cgroup>/cpu.rt_period_us") configurable as well.
The constraint on the period is that a subgroup must have a smaller or
equal period to its parent. But realistically its not very useful _yet_
of the memcg.
Example:
- mkdir /cgroup/hwpoison
+ mkdir /sys/fs/cgroup/mem/hwpoison
usemem -m 100 -s 1000 &
- echo `jobs -p` > /cgroup/hwpoison/tasks
+ echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks
- memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
+ memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ')
echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
page-types -p `pidof init` --hwpoison # shall do nothing
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
-F: arch/x86/kernel/cpu/cpufreq/
F: drivers/cpufreq/
F: include/linux/cpufreq.h
EBTABLES
M: Bart De Schuymer <bart.de.schuymer@pandora.be>
-L: ebtables-user@lists.sourceforge.net
-L: ebtables-devel@lists.sourceforge.net
+L: netfilter-devel@vger.kernel.org
W: http://ebtables.sourceforge.net/
S: Maintained
F: include/linux/netfilter_bridge/ebt_*.h
F: drivers/leds/
F: include/linux/leds.h
+LEGACY EEPROM DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+S: Maintained
+F: Documentation/misc-devices/eeprom
+F: drivers/misc/eeprom/eeprom.c
+
LEGO USB Tower driver
M: Juergen Stuber <starblue@users.sourceforge.net>
L: legousb-devel@lists.sourceforge.net
F: mm/
MEMORY RESOURCE CONTROLLER
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: linux-mm@kvack.org
F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
-M: David Brownell <dbrownell@users.sourceforge.net>
-S: Odd Fixes
+S: Orphan
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
-M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
F: arch/*/include/asm/percpu.h
PER-TASK DELAY ACCOUNTING
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
F: drivers/input/serio/i8042-unicore32io.h
F: drivers/i2c/busses/i2c-puv3.c
F: drivers/video/fb-puv3.c
+F: drivers/rtc/rtc-puv3.c
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
F: drivers/staging/tty/specialix*
SPI SUBSYSTEM
-M: David Brownell <dbrownell@users.sourceforge.net>
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
F: Documentation/target/
TASKSTATS STATISTICS INTERFACE
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
-M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
-S: Odd Fixes
+S: Orphan
F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
-M: David Brownell <dbrownell@users.sourceforge.net>
+M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/gadget/
F: include/linux/usb/gadget*
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
-F: Documentation/usb/hiddev.txt
+F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
USB ISP116X DRIVER
F: sound/usb/midi.*
USB OHCI DRIVER
-M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
-S: Odd Fixes
+S: Orphan
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
F: Documentation/filesystems/vfat.txt
F: fs/fat/
+VIDEOBUF2 FRAMEWORK
+M: Pawel Osciak <pawel@osciak.com>
+M: Marek Szyprowski <m.szyprowski@samsung.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/video/videobuf2-*
+F: include/media/videobuf2-*
+
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/platform/x86
+X86 MCE INFRASTRUCTURE
+M: Tony Luck <tony.luck@intel.com>
+M: Borislav Petkov <bp@amd64.org>
+L: linux-edac@vger.kernel.org
+S: Maintained
+F: arch/x86/kernel/cpu/mcheck/*
+
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
VERSION = 3
PATCHLEVEL = 0
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
NAME = Sneaky Weasel
# *DOCUMENTATION*
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
define filechk_version.h
(echo \#define LINUX_VERSION_CODE $(shell \
- expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+ expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
PHONY += _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
- echo "Warning: you may need to install module-init-tools"; \
- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
- sleep 1; \
- fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
# Run depmod only if we have System.map and depmod is executable
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
- cmd_depmod = \
- if [ -r System.map -a -x $(DEPMOD) ]; then \
- $(DEPMOD) -ae -F System.map \
- $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
- $(KERNELRELEASE); \
- fi
+ cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+ $(KERNELRELEASE)
# Create temporary dir for module support files
# clean it up only when building all modules
return -EFAULT;
len = namelen;
- if (namelen > 32)
+ if (len > 32)
len = 32;
down_read(&uts_sem);
down_read(&uts_sem);
res = sysinfo_table[offset];
len = strlen(res)+1;
- if (len > count)
+ if ((unsigned long)len > (unsigned long)count)
len = count;
if (copy_to_user(buf, res, len))
err = -EFAULT;
return 1;
case GSI_GET_HWRPB:
- if (nbytes < sizeof(*hwrpb))
+ if (nbytes > sizeof(*hwrpb))
return -EINVAL;
if (copy_to_user(buffer, hwrpb, nbytes) != 0)
return -EFAULT;
{
struct rusage r;
long ret, err;
+ unsigned int status = 0;
mm_segment_t old_fs;
if (!ur)
old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
+ ret = sys_wait4(pid, (unsigned int __user *) &status, options,
+ (struct rusage __user *) &r);
set_fs (old_fs);
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
return -EFAULT;
err = 0;
+ err |= put_user(status, ustatus);
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
.word 0xff0ffff0
- b __arm926ejs_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __arm926ejs_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_MXS=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_DMADEVICES=y
CONFIG_MXS_DMA=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_SA1100=m
CONFIG_EXT2_FS=m
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SA1100=m
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_PXA=m
CONFIG_EXT2_FS=y
unsigned long dt_root;
const char *model;
+ if (!dt_phys)
+ return NULL;
+
devtree = phys_to_virt(dt_phys);
/* check device tree validity */
usr_entry
kuser_cmpxchg_check
+#ifdef CONFIG_IRQSOFF_TRACER
+ bl trace_hardirqs_off
+#endif
+
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
#endif
mov why, #0
- b ret_to_user
+ b ret_to_user_from_irq
UNWIND(.fnend )
ENDPROC(__irq_usr)
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
+ENTRY(ret_to_user_from_irq)
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
arch_ret_to_user r1, lr
restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
ENDPROC(ret_to_user)
/*
fs = get_fs();
set_fs(KERNEL_DS);
- for (i = -4; i < 1; i++) {
+ for (i = -4; i < 1 + !!thumb; i++) {
unsigned int val, bad;
if (thumb)
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- if (!pte_present(*pte) || !pte_dirty(*pte)) {
+ if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}
.resource = da850_mcasp_resources,
};
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
/*-------------------------------------------------------------------------*/
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
static void
gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+ struct davinci_gpio_regs __iomem *g;
u32 mask = 0xffff;
+ g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+
/* we only care about one bank */
if (irq & 1)
mask <<= 16;
/* set up all irqs in this bank */
irq_set_chained_handler(bank_irq, gpio_irq_handler);
- irq_set_chip_data(bank_irq, (__force void *)g);
- irq_set_handler_data(bank_irq, (void *)irq);
+ irq_set_handler_data(bank_irq, (__force void *)g);
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
irq_set_chip(irq, &gpio_irqchip);
}
};
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device ep93xx_eth_device = {
.name = "ep93xx-eth",
.id = -1,
.dev = {
- .platform_data = &ep93xx_eth_data,
+ .platform_data = &ep93xx_eth_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_eth_dma_mask,
},
.num_resources = ARRAY_SIZE(ep93xx_eth_resource),
.resource = ep93xx_eth_resource,
help
Common setup code for the camera interfaces.
+config EXYNOS4_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
# machine support
menu "EXYNOS4 Machines"
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_USB_HSPHY,
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
#ifndef __PLAT_S5P_REGS_USB_PHY_H
#define __PLAT_S5P_REGS_USB_PHY_H
-#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
}
+#ifdef CONFIG_PM
static void exynos4_pwm4_resume(struct clocksource *cs)
{
unsigned long pclk;
exynos4_pwm_init(4, ~0);
exynos4_pwm_start(4, 1);
}
+#endif
struct clocksource pwm_clocksource = {
.name = "pwm_timer4",
clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+ ce->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(ce);
}
#include <asm/hardware/debug-8250.S>
#else
+#include <mach/hardware.h>
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.else
mov \rp, #0
.endif
- orr \rv, \rp, #0x42000000
- orr \rp, \rp, #dc21285_high
+ orr \rv, \rp, #dc21285_high
+ orr \rp, \rp, #0x42000000
.endm
.macro senduart,rd,rx
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
+ select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IPU_CORE
+ select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
CCR_ACRPT, DMA_CCR(channel));
-#ifdef CONFIG_ARCH_MX2
if ((cpu_is_mx21() || cpu_is_mx27()) &&
imxdma->sg && imx_dma_hw_chain(imxdma)) {
imxdma->sg = sg_next(imxdma->sg);
DMA_CCR(channel));
}
}
-#endif
imxdma->in_use = 1;
local_irq_restore(flags);
}
EXPORT_SYMBOL(imx_dma_disable);
-#ifdef CONFIG_ARCH_MX2
static void imx_dma_watchdog(unsigned long chno)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
if (imxdma->err_handler)
imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
}
-#endif
static irqreturn_t dma_err_handler(int irq, void *dev_id)
{
{
int i, disr;
-#ifdef CONFIG_ARCH_MX2
if (cpu_is_mx21() || cpu_is_mx27())
dma_err_handler(irq, dev_id);
-#endif
disr = imx_dmav1_readl(DMA_DISR);
imxdma->name = name;
local_irq_restore(flags); /* request_irq() can block */
-#ifdef CONFIG_ARCH_MX2
if (cpu_is_mx21() || cpu_is_mx27()) {
ret = request_irq(MX2x_INT_DMACH0 + channel,
dma_irq_handler, 0, "DMA", NULL);
imxdma->watchdog.function = &imx_dma_watchdog;
imxdma->watchdog.data = channel;
}
-#endif
return ret;
}
imx_dma_disable(channel);
imxdma->name = NULL;
-#ifdef CONFIG_ARCH_MX2
if (cpu_is_mx21() || cpu_is_mx27())
free_irq(MX2x_INT_DMACH0 + channel, NULL);
-#endif
local_irq_restore(flags);
}
int ret = 0;
int i;
-#ifdef CONFIG_ARCH_MX1
if (cpu_is_mx1())
imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
- else
-#endif
-#ifdef CONFIG_MACH_MX21
- if (cpu_is_mx21())
+ else if (cpu_is_mx21())
imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
- else
-#endif
-#ifdef CONFIG_MACH_MX27
- if (cpu_is_mx27())
+ else if (cpu_is_mx27())
imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
else
-#endif
return 0;
dma_clk = clk_get(NULL, "dma");
/* reset DMA module */
imx_dmav1_writel(DCR_DRST, DMA_DCR);
-#ifdef CONFIG_ARCH_MX1
if (cpu_is_mx1()) {
ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
if (ret) {
return ret;
}
}
-#endif
+
/* enable DMA module */
imx_dmav1_writel(DCR_DEN, DMA_DCR);
.keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
};
-static struct gpio_led gpio_leds[] = {
+static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
},
};
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
+static const struct gpio_led_platform_data
+ eukrea_mbimx27_gpio_led_info __initconst = {
+ .leds = eukrea_mbimx27_gpio_leds,
+ .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
};
static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
},
};
-static struct platform_device *platform_devices[] __initdata = {
- &leds_gpio,
-};
-
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.dat3_card_detect = 1,
};
imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
}
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
};
-static struct gpio_led eukrea_mbimxsd_leds[] = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
},
};
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+ eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &eukrea_mbimxsd_led_info,
- },
-};
-
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
};
static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_lcd_powerdev,
};
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
},
};
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+ eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &eukrea_mbimxsd_led_info,
- },
-};
-
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
};
static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_lcd_powerdev,
};
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
}
};
-/* --- SERIAL RESSOURCE --- */
-static const struct imxuart_platform_data uart0_pdata __initconst = {
- .flags = 0,
-};
-
static const struct imxuart_platform_data uart1_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
ARRAY_SIZE(apf9328_pins),
"APF9328");
- imx1_add_imx_uart0(&uart0_pdata);
+ imx1_add_imx_uart0(NULL);
imx1_add_imx_uart1(&uart1_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
#include "devices-imx27.h"
-#define SD1_EN_GPIO (GPIO_PORTB + 25)
-#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
-#define SPI2_SS0 (GPIO_PORTD + 21)
-#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
+#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
+#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
+#define SPI2_SS0 IMX_GPIO_NR(4, 21)
+#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
+#define PMIC_INT IMX_GPIO_NR(3, 14)
+#define SD1_CD IMX_GPIO_NR(2, 26)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PD22_PF_CSPI2_SCLK,
PD23_PF_CSPI2_MISO,
PD24_PF_CSPI2_MOSI,
+ SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
/* I2C1 */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
+ /* PMIC INT */
+ PMIC_INT | GPIO_GPIO | GPIO_IN,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
- IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+ return request_irq(gpio_to_irq(SD1_CD), detect_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIOB(26), data);
+ free_irq(gpio_to_irq(SD1_CD), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
__setup("otg_mode=", mx27_3ds_otg_mode);
/* Regulators */
+static struct regulator_init_data gpo_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
static struct regulator_consumer_supply vmmc1_consumers[] = {
REGULATOR_SUPPLY("lcd_2v8", NULL),
};
.constraints = {
.min_uV = 2800000,
.max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
.consumer_supplies = vmmc1_consumers,
}, {
.id = MC13783_REG_VGEN,
.init_data = &vgen_init,
+ }, {
+ .id = MC13783_REG_GPO1, /* Turn on 1.8V */
+ .init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_GPO3, /* Turn on 3.3V */
+ .init_data = &gpo_init,
},
};
};
/* SPI */
-static int spi2_internal_chipselect[] = {SPI2_SS0};
+static int spi2_chipselect[] = {SPI2_SS0};
static const struct spi_imx_master spi2_pdata __initconst = {
- .chipselect = spi2_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect),
+ .chipselect = spi2_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi2_chipselect),
};
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = IRQ_GPIOC(14),
+ .irq = gpio_to_irq(PMIC_INT),
.mode = SPI_CS_HIGH,
},
};
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
/*SPI0*/
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
+ IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
+ IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
imx31_soc_init();
+ /* Configure SPI1 IOMUX */
+ mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
+
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
return 0;
}
-static struct gpio_led mx31moboard_leds[] = {
+static const struct gpio_led mx31moboard_leds[] __initconst = {
{
.name = "coreboard-led-0:red:running",
.default_trigger = "heartbeat",
},
};
-static struct gpio_led_platform_data mx31moboard_led_pdata = {
+static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
.num_leds = ARRAY_SIZE(mx31moboard_leds),
.leds = mx31moboard_leds,
};
-static struct platform_device mx31moboard_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mx31moboard_led_pdata,
- },
-};
-
static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
- &mx31moboard_leds_device,
};
static struct mx3_camera_pdata camera_pdata __initdata = {
"moboard");
platform_add_devices(devices, ARRAY_SIZE(devices));
+ gpio_led_register_device(-1, &mx31moboard_led_pdata);
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
#include "devices-imx35.h"
-#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
PC12_PF_UART1_RXD,
};
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static void uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
-}
-
static const struct imxuart_platform_data uart_pdata __initconst = {
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
};
{
imx1_soc_init();
+ mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins), "UART1");
+
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
/* GPIO LEDs */
-static struct gpio_led litekit_leds[] = {
+static const struct gpio_led litekit_leds[] __initconst = {
{
.name = "GPIO0",
.gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
}
};
-static struct gpio_led_platform_data litekit_led_platform_data = {
+static const struct gpio_led_platform_data
+ litekit_led_platform_data __initconst = {
.leds = litekit_leds,
.num_leds = ARRAY_SIZE(litekit_leds),
};
-static struct platform_device litekit_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &litekit_led_platform_data,
- },
-};
-
void __init mx31lite_db_init(void)
{
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_mmc(0, &mmc_pdata);
imx31_add_spi_imx0(&spi0_pdata);
- platform_device_register(&litekit_led_device);
+ gpio_led_register_device(-1, &litekit_led_platform_data);
imx31_add_imx2_wdt(NULL);
imx31_add_mxc_rtc(NULL);
}
#include <linux/io.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
#include <mach/msm_iomap.h>
#include <mach/cpu.h>
#if defined(CONFIG_ARCH_QSD8X50)
#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
#define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
- defined(CONFIG_ARCH_MSM8960)
+#elif defined(CONFIG_ARCH_MSM7X30)
#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
#define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
#else
#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
#define MSM_DGT_SHIFT (5)
{
struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
- return readl(clk->global_counter);
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return readl(clk->global_counter) >> clk->shift;
}
static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)
bool
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX51 evaluation board.
prompt "Eukrea MBIMXSD development board"
bool
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop"
+ select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika MX nettop. This includes specific
config MACH_MX51_EFIKASB
bool "Support MX51 Genesi Efika Smartbook"
+ select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika Smartbook. This includes specific
#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25)
#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26)
#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUARTA_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
-#define CPUIMX51_QUARTB_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
-#define CPUIMX51_QUARTC_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
-#define CPUIMX51_QUARTD_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
#define CPUIMX51_QUART_XTAL 14745600
#define CPUIMX51_QUART_REGSHIFT 17
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
- .irq = CPUIMX51_QUARTA_IRQ,
+ .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
- .irq = CPUIMX51_QUARTB_IRQ,
+ .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
- .irq = CPUIMX51_QUARTC_IRQ,
+ .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = CPUIMX51_QUARTD_IRQ,
+ .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "devices-imx51.h"
#include "devices.h"
-#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static iomux_v3_cfg_t mx51_3ds_pads[] = {
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
-#define BABBAGE_PHY_RESET IMX_GPIO_NR(2, 5)
+#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5)
#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14)
#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
/* USB HUB reset line*/
MX51_PAD_GPIO1_7__GPIO1_7,
+ /* USB PHY reset line */
+ MX51_PAD_EIM_D21__GPIO2_5,
+
/* FEC */
MX51_PAD_EIM_EB2__FEC_MDIO,
MX51_PAD_EIM_EB3__FEC_RDATA1,
.bitrate = 400000,
};
+static struct gpio mx51_babbage_usbh1_gpios[] = {
+ { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
+ { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
+};
+
static int gpio_usbh1_active(void)
{
iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
int ret;
/* Set USBH1_STP to GPIO and toggle it */
mxc_iomux_v3_setup_pad(usbh1stp_gpio);
- ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
+ ret = gpio_request_array(mx51_babbage_usbh1_gpios,
+ ARRAY_SIZE(mx51_babbage_usbh1_gpios));
if (ret) {
- pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
+ pr_debug("failed to get USBH1 pins: %d\n", ret);
return ret;
}
- gpio_direction_output(BABBAGE_USBH1_STP, 0);
- gpio_set_value(BABBAGE_USBH1_STP, 1);
- msleep(100);
- gpio_free(BABBAGE_USBH1_STP);
-
- /* De-assert USB PHY RESETB */
- mxc_iomux_v3_setup_pad(phyreset_gpio);
- ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
- if (ret) {
- pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
- return ret;
- }
- gpio_direction_output(BABBAGE_PHY_RESET, 1);
+ msleep(100);
+ gpio_set_value(BABBAGE_USBH1_STP, 1);
+ gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
+ gpio_free_array(mx51_babbage_usbh1_gpios,
+ ARRAY_SIZE(mx51_babbage_usbh1_gpios));
return 0;
}
}
}
-static struct gpio_led mx51_efikamx_leds[] = {
+static struct gpio_led mx51_efikamx_leds[] __initdata = {
{
.name = "efikamx:green",
.default_trigger = "default-on",
},
};
-static struct gpio_led_platform_data mx51_efikamx_leds_data = {
+static const struct gpio_led_platform_data
+ mx51_efikamx_leds_data __initconst = {
.leds = mx51_efikamx_leds,
.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
};
-static struct platform_device mx51_efikamx_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mx51_efikamx_leds_data,
- },
-};
-
static struct gpio_keys_button mx51_efikamx_powerkey[] = {
{
.code = KEY_POWER,
mx51_efikamx_leds[2].default_trigger = "mmc1";
}
- platform_device_register(&mx51_efikamx_leds_device);
+ gpio_led_register_device(-1, &mx51_efikamx_leds_data);
imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
if (system_rev == 0x11) {
mxc_register_device(&mxc_usbh2_device, &usbh2_config);
}
-static struct gpio_led mx51_efikasb_leds[] = {
+static const struct gpio_led mx51_efikasb_leds[] __initconst = {
{
.name = "efikasb:green",
.default_trigger = "default-on",
},
};
-static struct gpio_led_platform_data mx51_efikasb_leds_data = {
+static const struct gpio_led_platform_data
+ mx51_efikasb_leds_data __initconst = {
.leds = mx51_efikasb_leds,
.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
};
-static struct platform_device mx51_efikasb_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mx51_efikasb_leds_data,
- },
-};
-
static struct gpio_keys_button mx51_efikasb_keys[] = {
{
.code = KEY_POWER,
mx51_efikasb_usb();
imx51_add_sdhci_esdhc_imx(1, NULL);
- platform_device_register(&mx51_efikasb_leds_device);
+ gpio_led_register_device(-1, &mx51_efikasb_leds_data);
imx_add_gpio_keys(&mx51_efikasb_keys_data);
-
}
static void __init mx51_efikasb_timer_init(void)
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
+ NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
+ NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
NULL, NULL, &ipg_clk, NULL);
#include "devices.h"
#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
-#define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
#define MBIMX51_LED1 IMX_GPIO_NR(3, 6)
#define MBIMX51_LED2 IMX_GPIO_NR(3, 7)
#define MBIMX51_LED3 IMX_GPIO_NR(3, 8)
-static struct gpio_led mbimx51_leds[] = {
+static const struct gpio_led mbimx51_leds[] __initconst = {
{
.name = "led0",
.default_trigger = "heartbeat",
},
};
-static struct gpio_led_platform_data mbimx51_leds_info = {
+static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
.leds = mbimx51_leds,
.num_leds = ARRAY_SIZE(mbimx51_leds),
};
-static struct platform_device mbimx51_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mbimx51_leds_info,
- },
-};
-
-static struct platform_device *devices[] __initdata = {
- &mbimx51_leds_gpio,
-};
-
static iomux_v3_cfg_t mbimx51_pads[] = {
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
I2C_BOARD_INFO("tsc2007", 0x49),
- .irq = MBIMX51_TSC2007_IRQ,
+ .irq = gpio_to_irq(MBIMX51_TSC2007_GPIO),
.platform_data = &tsc2007_data,
}, {
I2C_BOARD_INFO("tlv320aic23", 0x1a),
gpio_direction_output(MBIMX51_LED3, 1);
gpio_free(MBIMX51_LED3);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ gpio_led_register_device(-1, &mbimx51_leds_info);
imx51_add_imx_keypad(&mbimx51_map_data);
gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
gpio_direction_input(MBIMX51_TSC2007_GPIO);
- irq_set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+ irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
+ IRQF_TRIGGER_FALLING);
i2c_register_board_info(1, mbimx51_i2c_devices,
ARRAY_SIZE(mbimx51_i2c_devices));
#define GPIO_LED1 IMX_GPIO_NR(3, 30)
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31)
-static struct gpio_led eukrea_mbimxsd_leds[] = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
},
};
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+ eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &eukrea_mbimxsd_led_info,
- },
-};
-
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_leds_gpio,
-};
-
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
config MODULE_TX28
bool
select SOC_IMX28
+ select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
+#include <linux/dma-mapping.h>
#include <asm/sizes.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA3__SSP0_D3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA4__SSP0_D4 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA5__SSP0_D5 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA6__SSP0_D6 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
- MX28_PAD_SSP0_DATA7__SSP0_D7 |
- (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_CMD__SSP0_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
-static struct gpio_led tx28_stk5v3_leds[] = {
+static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
{
.name = "GPIO-LED",
.default_trigger = "heartbeat",
/* spi via ssp will be added when available */
spi_register_board_info(tx28_spi_board_info,
ARRAY_SIZE(tx28_spi_board_info));
- mxs_add_platform_device("leds-gpio", 0, NULL, 0,
- &tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data));
+ gpio_led_register_device(0, &tx28_stk5v3_led_data);
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
#include <linux/err.h>
#include <linux/mutex.h>
+#include <asm/processor.h> /* for cpu_relax() */
+
#include <mach/mxs.h>
#define OCOTP_WORD_OFFSET 0x20
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
- return -ENODEV;
+ ret = -ENODEV;
+ goto exit_device_put;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
- goto exit_device_del;
+ goto exit_device_put;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
- goto exit_device_put;
+ goto exit_device_del;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
kfree(d);
exit_release_p:
kfree(p);
-exit_device_put:
- platform_device_put(pdev);
exit_device_del:
platform_device_del(pdev);
+exit_device_put:
+ platform_device_put(pdev);
return ret;
}
USE_PLATFORM_PM_SLEEP_OPS
},
};
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
- .pwr_domain = &default_power_domain,
+ .pwr_domain = OMAP1_PWR_DOMAIN,
.con_ids = { "ick", "fck", NULL, },
};
return 0;
}
core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
OMAP_MUX_MODE0),
};
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
{ ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
};
-static int omap_ethernet_init(void)
+static int __init omap_ethernet_init(void)
{
int status;
.gpio_wp = -EINVAL,
.nonremovable = true,
.ocr_mask = MMC_VDD_29_30,
+ .no_off_init = true,
},
{
.mmc = 1,
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, package);
+ omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <mach/gpio.h>
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>
#define SB_T35_SMSC911X_CS 4
#define SB_T35_SMSC911X_GPIO 65
-#define NAND_BLOCK_SIZE SZ_128K
-
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
#include <plat/gpmc-smsc911x.h>
#include "mux.h"
#include "control.h"
+#include "common-board-devices.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
.reset_gpio_port[2] = -EINVAL,
};
-static int cm_t3517_init_usbh(void)
+static int __init cm_t3517_init_usbh(void)
{
int err;
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#define NAND_BLOCK_SIZE SZ_128K
-
static struct mtd_partition cm_t3517_nand_partitions[] = {
{
.name = "xloader",
#include "timer-gp.h"
#include "common-board-devices.h"
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
#include "pm.h"
#include "common-board-devices.h"
-#define NAND_BLOCK_SIZE SZ_128K
-
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
| (gpio_get_value(173) << 2);
+ gpio_free_array(omap3_beagle_rev_gpios,
+ ARRAY_SIZE(omap3_beagle_rev_gpios));
+
switch (beagle_rev) {
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
+ /* Ensure msecure is mux'd to be able to set the RTC. */
+ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <plat/board.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
#define PANDORA_WIFI_NRESET_GPIO 23
#define OMAP3_PANDORA_TS_GPIO 94
-#define NAND_BLOCK_SIZE SZ_128K
-
static struct mtd_partition omap3pandora_nand_partitions[] = {
{
.name = "xloader",
static struct omap_nand_platform_data pandora_nand_data = {
.cs = 0,
- .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */
+ .devsize = NAND_BUSWIDTH_16,
+ .xfer_type = NAND_OMAP_PREFETCH_DMA,
.parts = omap3pandora_nand_partitions,
.nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
};
#include <asm/setup.h>
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OMAP3_AC_GPIO 136
#define OMAP3_TS_GPIO 162
#define TB_BL_PWM_TIMER 9
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, package);
+ omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
-#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
#define OVERO_SMSC911X2_CS 4
.name = "V28_A",
.min_uV = 2800000,
.max_uV = 3000000,
+ .always_on = true, /* due VIO leak to AIC34 VDDs */
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
{
/* FIXME this gpio setup is just a placeholder for now */
gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
- gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
return 0;
}
{ LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
};
-static void zoom_lcd_panel_init(void)
+static void __init zoom_lcd_panel_init(void)
{
zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request(gpio_pendown, "TS PenDown");
- if (err) {
- pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
- return;
- }
-
- gpio_direction_input(gpio_pendown);
- gpio_export(gpio_pendown, 0);
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
+ gpio_export(gpio_pendown, 0);
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+ }
ads7846_config.gpio_pendown = gpio_pendown;
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
+#define NAND_BLOCK_SIZE SZ_128K
+
struct twl4030_platform_data;
struct mtd_partition;
WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
- return PTR_ERR(od);
+ return IS_ERR(od) ? PTR_ERR(od) : 0;
}
postcore_initcall(omap4_l3_init);
int power_on, int vdd)
{
u32 reg;
+ unsigned long timeout;
if (power_on) {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
OMAP4_MMC1_PWRDNZ_MASK |
OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
- /* 4 microsec delay for comparator to generate an error*/
- udelay(4);
- reg = omap4_ctrl_pad_readl(control_pbias_offset);
+
+ timeout = jiffies + msecs_to_jiffies(5);
+ do {
+ reg = omap4_ctrl_pad_readl(control_pbias_offset);
+ if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
+ break;
+ usleep_range(100, 200);
+ } while (!time_after(jiffies, timeout));
+
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
if (c->no_off)
mmc->slots[0].no_off = 1;
+ if (c->no_off_init)
+ mmc->slots[0].no_regulator_off_init = c->no_off_init;
+
if (c->vcc_aux_disable_is_sleep)
mmc->slots[0].vcc_aux_disable_is_sleep = 1;
bool nonremovable; /* Nonremovable e.g. eMMC */
bool power_saving; /* Try to sleep or power off when possible */
bool no_off; /* power_saving and power is not to go off */
+ bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
void omap_mux_write_array(struct omap_mux_partition *partition,
struct omap_board_mux *board_mux)
{
+ if (!board_mux)
+ return;
+
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(partition, board_mux->value,
board_mux->reg_offset);
u16 omap_mux_get_gpio(int gpio)
{
struct omap_mux_partition *partition;
- struct omap_mux *m;
+ struct omap_mux *m = NULL;
list_for_each_entry(partition, &mux_partitions, node) {
m = omap_mux_get_by_gpio(partition, gpio);
/**
* omap4_mux_init() - initialize mux system with board specific set
- * @board_mux: Board specific mux table
+ * @board_subset: Board specific mux table
+ * @board_wkup_subset: Board specific mux table for wakeup instance
* @flags: OMAP package type used for the board
*/
-int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
+int omap4_mux_init(struct omap_board_mux *board_subset,
+ struct omap_board_mux *board_wkup_subset, int flags);
/**
* omap_mux_init - private mux init function, do not call
#define omap4_wkup_cbl_cbs_ball NULL
#endif
-int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
+int __init omap4_mux_init(struct omap_board_mux *board_subset,
+ struct omap_board_mux *board_wkup_subset, int flags)
{
struct omap_ball *package_balls_core;
struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
OMAP_MUX_GPIO_IN_MODE3,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
- omap4_wkup_muxmodes, NULL, board_subset,
+ omap4_wkup_muxmodes, NULL, board_wkup_subset,
package_balls_wkup);
return ret;
void *data)
{
struct omap_hwmod *temp_oh;
- int ret;
+ int ret = 0;
if (!fn)
return -EINVAL;
&omap44xx_iva_seq1_hwmod,
/* kbd class */
-/* &omap44xx_kbd_hwmod, */
+ &omap44xx_kbd_hwmod,
/* mailbox class */
&omap44xx_mailbox_hwmod,
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
- if (!dev)
+ if (!dev) {
+ iounmap(ctrl_base);
return 0;
+ }
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
if (IS_ERR(phyclk)) {
static int pm_dbg_init_done;
-static int __init pm_dbg_init(void);
+static int pm_dbg_init(void);
enum {
DEBUG_FILE_COUNTERS = 0,
DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
-static int __init pm_dbg_init(void)
+static int pm_dbg_init(void)
{
int i;
struct dentry *d;
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += irq.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
unsigned long tmp, tmp1;
void __iomem *reg = NULL;
- if (ch == DMC0)
+ if (ch == DMC0) {
reg = (S5P_VA_DMC0 + 0x30);
- else if (ch == DMC1)
+ } else if (ch == DMC1) {
reg = (S5P_VA_DMC1 + 0x30);
- else
+ } else {
printk(KERN_ERR "Cannot find DMC port\n");
+ return;
+ }
/* Find current DRAM frequency */
tmp = s5pv210_dram_conf[ch].freq;
}
static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_NONREMOVABLE,
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
};
* ------+--------------------+--------------------+-------
* IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
* IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
- * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low
+ * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
* IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
* IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
* IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
* But don't select both drivers in same time.
* These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
*
* Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports SHARD IRQ,
+ * This mean its register will be broken if it supports shared IRQ,
*/
/*
clk_put(hdmi_ick);
}
-/* USB1 (Host) */
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+ unsigned int usbphyaddr;
+ unsigned int usbcrcaddr;
+ struct renesas_usbhs_platform_info info;
+ struct delayed_work work;
+ struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), \
+ struct usbhs_private, info)
+
+#define usbhs_is_connected(priv) \
+ (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+ return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ /* init phy */
+ __raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+ struct usbhs_private *priv = container_of(work, struct usbhs_private,
+ work.work);
+
+ renesas_usbhs_call_notify_hotplug(priv->pdev);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ priv->pdev = pdev;
+ INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+ return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+ .usbcrcaddr = 0xe605810c, /* USBCR2 */
+ .info = {
+ .platform_callback = {
+ .hardware_init = usbhs0_hardware_init,
+ .hardware_exit = usbhs0_hardware_exit,
+ .phy_reset = usbhs_phy_reset,
+ .get_id = usbhs0_get_id,
+ .get_vbus = usbhs_get_vbus,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ },
+ },
+};
+
+static struct resource usbhs0_resources[] = {
+ [0] = {
+ .name = "USBHS0",
+ .start = 0xe6890000,
+ .end = 0xe68900e6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs0_device = {
+ .name = "renesas_usbhs",
+ .id = 0,
+ .dev = {
+ .platform_data = &usbhs0_private.info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs0_resources),
+ .resource = usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ */
+#define IRQ8 evt2irq(0x0300)
+
+/* USBHS1 USB Host support via r8a66597_hcd */
static void usb1_host_port_power(int port, int power)
{
if (!power) /* only power-on is supported for now */
static struct resource usb1_host_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.resource = usb1_host_resources,
};
-/* USB1 (Function) */
+/* USBHS1 USB Function support via renesas_usbhs */
+
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
#define USB_PHY_OFF (1 << 0)
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
-struct usbhs_private {
- unsigned int irq;
- unsigned int usbphyaddr;
- unsigned int usbcrcaddr;
- struct renesas_usbhs_platform_info info;
-};
-
-#define usbhs_get_priv(pdev) \
- container_of(renesas_usbhs_get_info(pdev), \
- struct usbhs_private, info)
-
-#define usbhs_is_connected(priv) \
- (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static int usbhs1_get_vbus(struct platform_device *pdev)
-{
- return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
static irqreturn_t usbhs1_interrupt(int irq, void *data)
{
struct platform_device *pdev = data;
struct usbhs_private *priv = usbhs_get_priv(pdev);
int ret;
- irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
-
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+ ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
dev_name(&pdev->dev), pdev);
if (ret) {
dev_err(&pdev->dev, "request_irq err\n");
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- free_irq(priv->irq, pdev);
+ free_irq(IRQ8, pdev);
}
-static void usbhs1_phy_reset(struct platform_device *pdev)
+static int usbhs1_get_id(struct platform_device *pdev)
{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* init phy */
- __raw_writew(0x8a0a, priv->usbcrcaddr);
+ return USBHS_GADGET;
}
static u32 usbhs1_pipe_cfg[] = {
};
static struct usbhs_private usbhs1_private = {
- .irq = evt2irq(0x0300), /* IRQ8 */
- .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */
- .usbcrcaddr = 0xE6058130, /* USBCR4 */
+ .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
+ .usbcrcaddr = 0xe6058130, /* USBCR4 */
.info = {
.platform_callback = {
.hardware_init = usbhs1_hardware_init,
.hardware_exit = usbhs1_hardware_exit,
- .phy_reset = usbhs1_phy_reset,
.get_id = usbhs1_get_id,
- .get_vbus = usbhs1_get_vbus,
+ .phy_reset = usbhs_phy_reset,
+ .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
static struct resource usbhs1_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.resource = usbhs1_resources,
};
-
/* LED */
static struct gpio_led mackerel_leds[] = {
{
&nor_flash_device,
&smc911x_device,
&lcdc_device,
+ &usbhs0_device,
&usb1_host_device,
&usbhs1_device,
&leds_device,
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define GPIO_PORT167CR 0xE60520A7
#define GPIO_PORT168CR 0xE60520A8
#define SRCR4 0xe61580bc
#define USCCR1 0xE6058144
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
gpio_direction_output(GPIO_PORT151, 1);
- /* USB enable */
- gpio_request(GPIO_FN_VBUS0_1, NULL);
- gpio_request(GPIO_FN_IDIN_1_18, NULL);
- gpio_request(GPIO_FN_PWEN_1_115, NULL);
- gpio_request(GPIO_FN_OVCN_1_114, NULL);
- gpio_request(GPIO_FN_EXTLP_1, NULL);
- gpio_request(GPIO_FN_OVCN2_1, NULL);
- gpio_pull_down(GPIO_PORT168CR);
-
- /* setup USB phy */
- __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */
+ /* USBHS0 */
+ gpio_request(GPIO_FN_VBUS0_0, NULL);
+ gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+
+ /* USBHS1 */
+ gpio_request(GPIO_FN_VBUS0_1, NULL);
+ gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+ gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+ /* USB phy tweak to make the r8a66597_hcd host driver work */
+ __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
return IRQ_HANDLED;
}
+static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0; /* always allow wakeup */
+}
+
void __init sh73a0_init_irq(void)
{
void __iomem *gic_dist_base = __io(0xf0001000);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc00), evt2irq(0xc00),
evt2irq(0xc00), evt2irq(0xc00) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc20), evt2irq(0xc20),
evt2irq(0xc20), evt2irq(0xc20) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc40), evt2irq(0xc40),
evt2irq(0xc40), evt2irq(0xc40) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc60), evt2irq(0xc60),
evt2irq(0xc60), evt2irq(0xc60) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd20), evt2irq(0xd20),
evt2irq(0xd20), evt2irq(0xd20) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd40), evt2irq(0xd40),
evt2irq(0xd40), evt2irq(0xd40) },
};
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFB,
.irqs = { evt2irq(0xd60), evt2irq(0xd60),
evt2irq(0xd60), evt2irq(0xd60) },
};
bool reset;
__u16 clk_val;
__s8 usecount;
- __u32 res_reg;
+ void __iomem * res_reg;
__u16 res_mask;
bool hw_ctrld;
* the defines are used for setting up the I/O memory mapping.
*/
+#ifdef __ASSEMBLER__
+#define IOMEM(a) (a)
+#else
+#define IOMEM(a) (void __iomem *) a
+#endif
+
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
#define U300_SEMI_CONFIG_BASE 0x30000000
#endif
-/*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
/*
* AHB peripherals
*/
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
* Virtual accessor macros for static devices
*/
-
#endif
/* Use general purpose timer 2 as clock source */
if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
- printk(KERN_ERR "timer: failed to initialize clock "
- "source %s\n", clocksource_u300_1mhz.name);
+ pr_err("timer: failed to initialize U300 clock source\n");
clockevents_calc_mult_shift(&clockevent_u300_1mhz,
rate, APPTIMER_MIN_RANGE);
/* No custom data yet */
};
+ if (cpu_is_u8500v2())
+ pdata.supports_sleepmode = true;
+
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
},
};
-static void __init v2m_init_early(void)
-{
- ct_desc->init_early();
- versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
-}
-
static void __init v2m_timer_init(void)
{
u32 scctrl;
},
};
+static void __init v2m_init_early(void)
+{
+ ct_desc->init_early();
+ clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+ versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+}
+
static void v2m_power_off(void)
{
if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
{
int i;
- clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
/*
* We fork()ed a process, and we need a new context for the child
- * to run in.
+ * to run in. We reserve version 0 for initial tasks so we will
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
static void flush_context(void)
{
- u32 ttb;
- /* Copy TTBR1 into TTBR0 */
- asm volatile("mrc p15, 0, %0, c2, c0, 1\n"
- "mcr p15, 0, %0, c2, c0, 0"
- : "=r" (ttb));
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
return;
smp_rmb();
- asid = cpu_last_asid + cpu;
+ asid = cpu_last_asid + cpu + 1;
flush_context();
set_mm_context(mm, asid);
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
- asid = cpu_last_asid + smp_processor_id();
+ asid = cpu_last_asid + smp_processor_id() + 1;
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
- cpu_last_asid += NR_CPUS - 1;
+ cpu_last_asid += NR_CPUS;
}
set_mm_context(mm, asid);
memblock_reserve(__pa(_stext), _end - _stext);
#endif
#ifdef CONFIG_BLK_DEV_INITRD
+ if (phys_initrd_size &&
+ !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
+ pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
+ phys_initrd_start, phys_initrd_size);
+ phys_initrd_start = phys_initrd_size = 0;
+ }
if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
" .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .text : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .data : 0x%p" " - 0x%p" " (%4d kB)\n",
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
(PAGE_SIZE)),
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
- MLK_ROUNDUP(_sdata, _edata));
+ MLK_ROUNDUP(_sdata, _edata),
+ MLK_ROUNDUP(__bss_start, __bss_stop));
#undef MLK
#undef MLM
.long 0
.long 0
.long v4_cache_fns
- .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
+ .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
.type __triscenda7_proc_info, #object
__triscenda7_proc_info:
.long 0
.long 0
.long v4_cache_fns
- .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
+ .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
.type __p2001_proc_info, #object
__p2001_proc_info:
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
- mrc p15, 0, r2, c2, c0, 1 @ load TTB 1
- mcr p15, 0, r2, c2, c0, 0 @ into TTB 0
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
+ isb
+1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
- mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
- isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)
#define AVIC_FIPNDH 0x60 /* fast int pending high */
#define AVIC_FIPNDL 0x64 /* fast int pending low */
+#define AVIC_NUM_IRQS 64
+
void __iomem *avic_base;
#ifdef CONFIG_MXC_IRQ_PRIOR
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
- if (irq >= MXC_INTERNAL_IRQS)
+ if (irq >= AVIC_NUM_IRQS)
return -EINVAL;;
temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
{
unsigned int irqt;
- if (irq >= MXC_INTERNAL_IRQS)
+ if (irq >= AVIC_NUM_IRQS)
return -EINVAL;
- if (irq < MXC_INTERNAL_IRQS / 2) {
+ if (irq < AVIC_NUM_IRQS / 2) {
irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
- irq -= MXC_INTERNAL_IRQS / 2;
+ irq -= AVIC_NUM_IRQS / 2;
irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
/* all IRQ no FIQ */
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
- for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+ for (i = 0; i < AVIC_NUM_IRQS; i++) {
irq_set_chip_and_handler(i, &mxc_avic_chip.base,
handle_level_irq);
set_irq_flags(i, IRQF_VALID);
#ifdef CONFIG_SOC_IMX25
struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
- imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+ imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX31
struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
- imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+ imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
- imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+ imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1);
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
- imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+ imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1);
#endif /* ifdef CONFIG_SOC_IMX51 */
static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
+ .end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
}
#ifdef CONFIG_ARCH_MX25
-static struct sdma_script_start_addrs addr_imx25_to1 = {
+static struct sdma_script_start_addrs addr_imx25 = {
.ap_2_ap_addr = 729,
.uart_2_mcu_addr = 904,
.per_2_app_addr = 1255,
#endif
#ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51_to1 = {
+static struct sdma_script_start_addrs addr_imx51 = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
#if defined(CONFIG_SOC_IMX25)
if (cpu_is_mx25()) {
- imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1;
+ imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25;
ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
} else
#endif
#if defined(CONFIG_SOC_IMX51)
if (cpu_is_mx51()) {
- imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
+ int to_version = mx51_revision() >> 4;
+ imx51_imx_sdma_data.pdata.to_version = to_version;
+ imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
} else
#endif
#ifdef CONFIG_SOC_IMX51
const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
#define imx51_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+ imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
imx51_imx_ssi_data_entry(0, 1),
imx51_imx_ssi_data_entry(1, 2),
imx51_imx_ssi_data_entry(2, 3),
*/
#include <mach/hardware.h>
-#ifdef CONFIG_ARCH_MX1
+#ifdef CONFIG_SOC_IMX1
#define UART_PADDR MX1_UART1_BASE_ADDR
#endif
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#define UART_PADDR MX25_UART1_BASE_ADDR
#endif
-#ifdef CONFIG_ARCH_MX2
+#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#define UART_PADDR MX2x_UART1_BASE_ADDR
#endif
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#define UART_PADDR MX3x_UART1_BASE_ADDR
#endif
-#ifdef CONFIG_ARCH_MX5
+#ifdef CONFIG_SOC_IMX51
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#include <mach/mxc.h>
-#ifdef CONFIG_ARCH_MX5
#include <mach/mx50.h>
#include <mach/mx51.h>
#include <mach/mx53.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX3
#include <mach/mx3x.h>
#include <mach/mx31.h>
#include <mach/mx35.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-# include <mach/mx2x.h>
-# ifdef CONFIG_MACH_MX21
-# include <mach/mx21.h>
-# endif
-# ifdef CONFIG_MACH_MX27
-# include <mach/mx27.h>
-# endif
-#endif
-
-#ifdef CONFIG_ARCH_MX1
-# include <mach/mx1.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX25
-# include <mach/mx25.h>
-#endif
+#include <mach/mx2x.h>
+#include <mach/mx21.h>
+#include <mach/mx27.h>
+#include <mach/mx1.h>
+#include <mach/mx25.h>
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
#define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0)
#define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0)
#define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0)
#define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0)
#define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0)
#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0)
#define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0)
#define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0)
#define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0)
#define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0)
#define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0)
#define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0)
#define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0)
#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
#define MUX_PAD_CTRL_SHIFT 41
#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define NO_PAD_CTRL ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
#define MUX_SEL_INPUT_SHIFT 58
#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
* Use to set PAD control
*/
+#define NO_PAD_CTRL (1 << 16)
#define PAD_CTL_DVS (1 << 13)
#define PAD_CTL_HYS (1 << 8)
+++ /dev/null
-/*
- * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __MACH_IOMUX_H__
-#define __MACH_IOMUX_H__
-
-/* This file will go away, please include mach/iomux-mx... directly */
-
-#ifdef CONFIG_ARCH_MX1
-#include <mach/iomux-mx1.h>
-#endif
-#ifdef CONFIG_ARCH_MX2
-#include <mach/iomux-mx2x.h>
-#ifdef CONFIG_MACH_MX21
-#include <mach/iomux-mx21.h>
-#endif
-#ifdef CONFIG_MACH_MX27
-#include <mach/iomux-mx27.h>
-#endif
-#endif
-
-#endif /* __MACH_IOMUX_H__ */
/*
* Memory regions and CS
*/
-#define MX53_CSD0_BASE_ADDR 0x90000000
-#define MX53_CSD1_BASE_ADDR 0xA0000000
-#define MX53_CS0_BASE_ADDR 0xB0000000
-#define MX53_CS1_BASE_ADDR 0xB8000000
-#define MX53_CS2_BASE_ADDR 0xC0000000
-#define MX53_CS3_BASE_ADDR 0xC8000000
-#define MX53_CS4_BASE_ADDR 0xCC000000
-#define MX53_CS5_BASE_ADDR 0xCE000000
+#define MX53_CSD0_BASE_ADDR 0x70000000
+#define MX53_CSD1_BASE_ADDR 0xB0000000
+#define MX53_CS0_BASE_ADDR 0xF0000000
+#define MX53_CS1_32MB_BASE_ADDR 0xF2000000
+#define MX53_CS1_64MB_BASE_ADDR 0xF4000000
+#define MX53_CS2_64MB_BASE_ADDR 0xF4000000
+#define MX53_CS2_96MB_BASE_ADDR 0xF6000000
+#define MX53_CS3_BASE_ADDR 0xF6000000
#define MX53_IO_P2V(x) IMX_IO_P2V(x)
#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x))
#define MX53_INT_ESDHC2 2
#define MX53_INT_ESDHC3 3
#define MX53_INT_ESDHC4 4
-#define MX53_INT_RESV5 5
+#define MX53_INT_DAP 5
#define MX53_INT_SDMA 6
#define MX53_INT_IOMUX 7
#define MX53_INT_NFC 8
#define MX53_INT_UART1 31
#define MX53_INT_UART2 32
#define MX53_INT_UART3 33
-#define MX53_INT_RESV34 34
-#define MX53_INT_RESV35 35
+#define MX53_INT_RTC 34
+#define MX53_INT_PTP 35
#define MX53_INT_ECSPI1 36
#define MX53_INT_ECSPI2 37
#define MX53_INT_CSPI 38
#define MX53_INT_I2C1 62
#define MX53_INT_I2C2 63
#define MX53_INT_I2C3 64
-#define MX53_INT_RESV65 65
-#define MX53_INT_RESV66 66
+#define MX53_INT_MLB 65
+#define MX53_INT_ASRC 66
#define MX53_INT_SPDIF 67
#define MX53_INT_SIM_DAT 68
#define MX53_INT_IIM 69
extern unsigned int __mxc_cpu_type;
#endif
-#ifdef CONFIG_ARCH_MX1
+#ifdef CONFIG_SOC_IMX1
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
# define cpu_is_mx1() (0)
#endif
-#ifdef CONFIG_MACH_MX21
+#ifdef CONFIG_SOC_IMX21
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
# define cpu_is_mx21() (0)
#endif
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
# define cpu_is_mx25() (0)
#endif
-#ifdef CONFIG_MACH_MX27
+#ifdef CONFIG_SOC_IMX27
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
#ifndef __ASM_ARCH_MXC_TIMEX_H__
#define __ASM_ARCH_MXC_TIMEX_H__
-#if defined CONFIG_ARCH_MX1
-#define CLOCK_TICK_RATE 16000000
-#elif defined CONFIG_ARCH_MX2
-#define CLOCK_TICK_RATE 13300000
-#elif defined CONFIG_ARCH_MX3
-#define CLOCK_TICK_RATE 16625000
-#elif defined CONFIG_ARCH_MX25
-#define CLOCK_TICK_RATE 16000000
-#elif defined CONFIG_ARCH_MX5
-#define CLOCK_TICK_RATE 8000000
-#endif
+/* Bogus value */
+#define CLOCK_TICK_RATE 12345678
#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
{
size_t i;
- int ret;
+ int ret = 0;
for (i = 0; i < count; ++i) {
ret = mxc_gpio_mode(list[i]);
int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label)
{
- size_t i;
int ret;
- for (i = 0; i < count; ++i) {
- unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- ret = gpio_request(gpio, label);
- if (ret)
- goto err_gpio_request;
- }
-
ret = imx_iomuxv1_setup_multiple(pin_list, count);
- if (ret)
- goto err_setup;
-
- return 0;
-
-err_setup:
- BUG_ON(i != count);
-
-err_gpio_request:
- mxc_gpio_release_multiple_pins(pin_list, i);
-
return ret;
}
EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
- size_t i;
-
- for (i = 0; i < count; ++i) {
- unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- gpio_free(gpio);
- }
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
int __init imx_iomuxv1_init(void __iomem *base, int numports)
{
imx_iomuxv1_baseaddr = base;
goto err_free_clk;
}
- r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
if (r == NULL) {
dev_err(&pdev->dev, "failed to request memory resource\n");
ret = -EBUSY;
goto err_free_clk;
}
- pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ pwm->mmio_base = ioremap(r->start, resource_size(r));
if (pwm->mmio_base == NULL) {
dev_err(&pdev->dev, "failed to ioremap() registers\n");
ret = -ENODEV;
return 0;
err_free_mem:
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
err_free_clk:
clk_put(pwm->clk);
err_free:
iounmap(pwm->mmio_base);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
clk_put(pwm->clk);
void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+#define TZIC_NUM_IRQS 128
+
#ifdef CONFIG_FIQ
static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
{
/* all IRQ no FIQ Warning :: No selection */
- for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+ for (i = 0; i < TZIC_NUM_IRQS; i++) {
irq_set_chip_and_handler(i, &mxc_tzic_chip.base,
handle_level_irq);
set_irq_flags(i, IRQF_VALID);
int num_gpio;
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
};
#endif /* __ASM_PLAT_GPIO_H */
#include <linux/mtd/map.h>
+struct platform_device;
extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif
* lower 16 bit is used for h/w and upper 16 bit is for s/w.
*/
#define IOVMF_SW_SHIFT 16
-#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
-#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
-#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
/*
* iovma: h/w flags derived from cam and ram attribute
/* If using power_saving and the MMC power is not to go off */
unsigned no_off:1;
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;
return PTR_ERR(va);
}
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_MMIO;
if (!va)
return -ENOMEM;
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_ALLOC;
if (!va)
return -ENOMEM;
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_MMIO;
return -ENOMEM;
pa = virt_to_phys(va);
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_ALLOC;
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/pm_runtime.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
static int _od_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
+ int ret;
+
+ ret = pm_generic_runtime_suspend(dev);
+
+ if (!ret)
+ omap_device_idle(pdev);
+
+ return ret;
+}
- return omap_device_idle(pdev);
+static int _od_runtime_idle(struct device *dev)
+{
+ return pm_generic_runtime_idle(dev);
}
static int _od_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- return omap_device_enable(pdev);
+ omap_device_enable(pdev);
+
+ return pm_generic_runtime_resume(dev);
}
static struct dev_power_domain omap_device_power_domain = {
.ops = {
.runtime_suspend = _od_runtime_suspend,
+ .runtime_idle = _od_runtime_idle,
.runtime_resume = _od_runtime_resume,
USE_PLATFORM_PM_SLEEP_OPS
}
else if (cpu_is_omap1611())
omap_sram_size = SZ_256K;
else {
- printk(KERN_ERR "Could not detect SRAM size\n");
+ pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
- printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
- __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
+ pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
+ (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
+ omap_sram_io_desc[0].virtual,
+ omap_sram_io_desc[0].length);
/*
* Normally devicemaps_init() would flush caches and tlb after
void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
- printk(KERN_ERR "Not enough space in SRAM\n");
+ pr_err("Not enough space in SRAM\n");
return NULL;
}
#ifdef CONFIG_PM
-static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
+static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
{
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
irqdbf("s3c2410: registered interrupt handlers\n");
}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
.num_resources = ARRAY_SIZE(s5p_onenand_resources),
.resource = s5p_onenand_resources,
};
-
-void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s5p_device_onenand.dev.platform_data = pd;
-}
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
-#define S5P_VA_USB_HSPHY S3C_ADDR(0x02900000)
+#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
.num_resources = ARRAY_SIZE(s3c_onenand_resources),
.resource = s3c_onenand_resources,
};
-
-void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s3c_device_onenand.dev.platform_data = pd;
-}
extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_spi0;
extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p6440_device_spi0;
-extern struct platform_device s5p6440_device_spi1;
-extern struct platform_device s5p6450_device_spi0;
-extern struct platform_device s5p6450_device_spi1;
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s3c_device_hwmon;
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_AT32AP700X=m
CONFIG_DMADEVICES=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
CONFIG_MODULES=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
*/
#define start_thread(regs, new_pc, new_sp) \
do { \
- set_fs(USER_DS); \
memset(regs, 0, sizeof(*regs)); \
regs->sr = MODE_USER; \
regs->pc = new_pc & ~1; \
data->regs = (void __iomem *)pdev->resource[0].start;
}
+ pdev->id = line;
pdata = pdev->dev.platform_data;
- pdata->num = portnr;
+ pdata->num = line;
at32_usarts[line] = pdev;
}
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
#define cpu_is_at91cap9() (0)
+#define cpu_is_at91cap9_revB() (0)
+#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
+#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
+#define cpu_is_at91sam9m10() (0)
+#define cpu_is_at91sam9g46() (0)
+#define cpu_is_at91sam9m11() (0)
+#define cpu_is_at91sam9x5() (0)
+#define cpu_is_at91sam9g15() (0)
+#define cpu_is_at91sam9g35() (0)
+#define cpu_is_at91sam9x35() (0)
+#define cpu_is_at91sam9g25() (0)
+#define cpu_is_at91sam9x25() (0)
#endif /* __ASM_ARCH_CPU_H */
return 0;
}
-static int intc_resume(void)
+static void intc_resume(void)
{
int i;
for (i = 0; i < 64; i++)
intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]);
-
- return 0;
}
#else
#define intc_suspend NULL
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=m
CONFIG_SDH_BFIN=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=m
CONFIG_EXT2_FS=m
# CONFIG_DNOTIFY is not set
bool
default n
+config M68000
+ bool
+ help
+ The Freescale (was Motorola) 68000 CPU is the first generation of
+ the well known M68K family of processors. The CPU core as well as
+ being available as a stand alone CPU was also used in many
+ System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+ a paging MMU.
+
+config MCPU32
+ bool
+ help
+ The Freescale (was then Motorola) CPU32 is a CPU core that is
+ based on the 68020 processor. For the most part it is used in
+ System-On-Chip parts, and does not contain a paging MMU.
+
+config COLDFIRE
+ bool
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ The Freescale ColdFire family of processors is a modern derivitive
+ of the 68000 processor family. They are mainly targeted at embedded
+ applications, and are all System-On-Chip (SOC) devices, as opposed
+ to stand alone CPUs. They implement a subset of the original 68000
+ processor instruction set.
+
config COLDFIRE_SW_A7
bool
default n
config M68328
bool "MC68328"
+ select M68000
help
Motorola 68328 processor support.
config M68EZ328
bool "MC68EZ328"
+ select M68000
help
Motorola 68EX328 processor support.
config M68VZ328
bool "MC68VZ328"
+ select M68000
help
Motorola 68VZ328 processor support.
config M68360
bool "MC68360"
+ select MCPU32
help
Motorola 68360 processor support.
config M5206
bool "MCF5206"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M5206e
bool "MCF5206e"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M520x
bool "MCF520x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help
config M523x
bool "MCF523x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
config M5249
bool "MCF5249"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M5271
bool "MCF5271"
+ select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
config M5272
bool "MCF5272"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
config M5275
bool "MCF5275"
+ select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
config M528x
bool "MCF528x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
config M5307
bool "MCF5307"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
config M532x
bool "MCF532x"
+ select COLDFIRE
select HAVE_CACHE_CB
help
Freescale (Motorola) ColdFire 532x processor support.
config M5407
bool "MCF5407"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
config M547x
bool "MCF547x"
+ select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
config M548x
bool "MCF548x"
+ select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
depends on (M548x || M547x)
default y
-config COLDFIRE
- bool
- depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- default y
-
config CLOCK_SET
bool "Enable setting the CPU clock frequency"
default n
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
-#if !defined(__mc68020__) && !defined(__mc68030__) && \
- !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
/*
* Simpler 68k and ColdFire parts also need a few other gcc functions.
*/
/* Kernel symbol table: Normal symbols */
. = ALIGN(4);
__start___ksymtab = .;
- *(__ksymtab)
+ *(SORT(___ksymtab+*))
__stop___ksymtab = .;
/* Kernel symbol table: GPL-only symbols */
__start___ksymtab_gpl = .;
- *(__ksymtab_gpl)
+ *(SORT(___ksymtab_gpl+*))
__stop___ksymtab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___ksymtab_unused = .;
- *(__ksymtab_unused)
+ *(SORT(___ksymtab_unused+*))
__stop___ksymtab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___ksymtab_unused_gpl = .;
- *(__ksymtab_unused_gpl)
+ *(SORT(___ksymtab_unused_gpl+*))
__stop___ksymtab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___ksymtab_gpl_future = .;
- *(__ksymtab_gpl_future)
+ *(SORT(___ksymtab_gpl_future+*))
__stop___ksymtab_gpl_future = .;
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
- *(__kcrctab)
+ *(SORT(___kcrctab+*))
__stop___kcrctab = .;
/* Kernel symbol table: GPL-only symbols */
__start___kcrctab_gpl = .;
- *(__kcrctab_gpl)
+ *(SORT(___kcrctab_gpl+*))
__stop___kcrctab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___kcrctab_unused = .;
- *(__kcrctab_unused)
+ *(SORT(___kcrctab_unused+*))
__stop___kcrctab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___kcrctab_unused_gpl = .;
- *(__kcrctab_unused_gpl)
+ *(SORT(___kcrctab_unused_gpl+*))
__stop___kcrctab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
- *(__kcrctab_gpl_future)
+ *(SORT(___kcrctab_gpl_future+*))
__stop___kcrctab_gpl_future = .;
/* Kernel symbol table: strings */
if (temp) {
long *lto = to;
const long *lfrom = from;
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+ for (; temp; temp--)
+ *lto++ = *lfrom++;
+#else
asm volatile (
" movel %2,%3\n"
" andw #7,%3\n"
" jpl 4b"
: "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1)
: "0" (lfrom), "1" (lto), "2" (temp));
-#else
- for (; temp; temp--)
- *lto++ = *lfrom++;
#endif
to = lto;
from = lfrom;
temp = count >> 2;
if (temp) {
long *ls = s;
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+ for (; temp; temp--)
+ *ls++ = c;
+#else
size_t temp1;
asm volatile (
" movel %1,%2\n"
" jpl 1b"
: "=a" (ls), "=d" (temp), "=&d" (temp1)
: "d" (c), "0" (ls), "1" (temp));
-#else
- for (; temp; temp--)
- *ls++ = c;
#endif
s = ls;
}
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
-
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("mulu%.l %3,%1:%0" \
- : "=d" ((USItype)(w0)), \
- "=d" ((USItype)(w1)) \
- : "%0" ((USItype)(u)), \
- "dmi" ((USItype)(v)))
-
-#else
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
#define SI_TYPE_SIZE 32
#define __BITS4 (SI_TYPE_SIZE / 4)
(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
} while (0)
+#else
+
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mulu%.l %3,%1:%0" \
+ : "=d" ((USItype)(w0)), \
+ "=d" ((USItype)(w1)) \
+ : "%0" ((USItype)(u)), \
+ "dmi" ((USItype)(v)))
+
#endif
#define __umulsidi3(u, v) \
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_DS1307=m
#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/smp.h>
case EXCEP_TRAP:
case EXCEP_UNIMPINS:
- if (get_user(opcode, (uint8_t __user *)regs->pc) != 0)
+ if (probe_kernel_read(&opcode, (u8 *)regs->pc, 1) < 0)
break;
if (opcode == 0xff) {
if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
RO_DATA(PAGE_SIZE)
/* writeable */
+ _sdata = .; /* Start of rw data section */
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .;
# conditionally purge this line in all ways
mov d1,(L1_CACHE_WAYDISP*0,a0)
-debugger_local_cache_flushinv_no_dcache:
+debugger_local_cache_flushinv_one_no_dcache:
#
# now try to flush the icache
#
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
- beq mn10300_local_icache_inv_range_reg_end
+ beq debugger_local_cache_flushinv_one_end
LOCAL_CLI_SAVE(d1)
addnote
-dtc
empty.c
hack-coff
infblock.c
+++ /dev/null
-dtc-lexer.lex.c
-dtc-parser.tab.c
-dtc-parser.tab.h
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_STORAGE=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PS3=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
#define ASM_PPC_RIO_H
extern void platform_rio_init(void);
-#ifdef CONFIG_RAPIDIO
+#ifdef CONFIG_FSL_RIO
extern int fsl_rio_mcheck_exception(struct pt_regs *);
#else
static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; }
.pvr_value = 0x80240000,
.cpu_name = "e5500",
.cpu_features = CPU_FTRS_E5500,
- .cpu_user_features = COMMON_USER_BOOKE,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
}
early_param("mem", early_parse_mem);
+/*
+ * overlaps_initrd - check for overlap with page aligned extension of
+ * initrd.
+ */
+static inline int overlaps_initrd(unsigned long start, unsigned long size)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (!initrd_start)
+ return 0;
+
+ return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
+ start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
+#else
+ return 0;
+#endif
+}
+
/**
* move_device_tree - move tree to an unused area, if needed.
*
* The device tree may be allocated beyond our memory limit, or inside the
- * crash kernel region for kdump. If so, move it out of the way.
+ * crash kernel region for kdump, or within the page aligned range of initrd.
+ * If so, move it out of the way.
*/
static void __init move_device_tree(void)
{
size = be32_to_cpu(initial_boot_params->totalsize);
if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
- overlaps_crashkernel(start, size)) {
+ overlaps_crashkernel(start, size) ||
+ overlaps_initrd(start, size)) {
p = __va(memblock_alloc(size, PAGE_SIZE));
memcpy(p, initial_boot_params, size);
initial_boot_params = (struct boot_param_header *)p;
#ifdef CONFIG_BLK_DEV_INITRD
/* then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start))
- memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
+ memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
+ _ALIGN_UP(initrd_end, PAGE_SIZE) -
+ _ALIGN_DOWN(initrd_start, PAGE_SIZE));
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC32
#undef FREESEC
}
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- if (start < end)
- printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
- totalram_pages++;
- }
-}
-#endif
-
-
#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);
}
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- if (start < end)
- printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
- totalram_pages++;
- }
-}
-#endif
-
static void pgd_ctor(void *addr)
{
memset(addr, 0, PGD_TABLE_SIZE);
mem_init_done = 1;
}
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (start >= end)
+ return;
+
+ start = _ALIGN_DOWN(start, PAGE_SIZE);
+ end = _ALIGN_UP(end, PAGE_SIZE);
+ pr_info("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ init_page_count(virt_to_page(start));
+ free_page(start);
+ totalram_pages++;
+ }
+}
+#endif
+
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
out_be32(&lbc->lteccr, LTECCR_CLEAR);
out_be32(&lbc->ltedr, LTEDR_ENABLE);
- /* Enable interrupts for any detected events */
- out_be32(&lbc->lteir, LTEIR_ENABLE);
-
/* Set the monitor timeout value to the maximum for erratum A001 */
if (of_device_is_compatible(node, "fsl,elbc"))
clrsetbits_be32(&lbc->lbcr, LBCR_BMT, LBCR_BMTPS);
goto err;
}
+ /* Enable interrupts for any detected events */
+ out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE);
+
return 0;
err:
select HAVE_GET_USER_PAGES_FAST
select HAVE_ARCH_MUTEX_CPU_RELAX
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
+ select HAVE_RCU_TABLE_FREE if SMP
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK
#include <linux/gfp.h>
#include <linux/mm.h>
-#define check_pgt_cache() do {} while (0)
-
unsigned long *crst_table_alloc(struct mm_struct *);
void crst_table_free(struct mm_struct *, unsigned long *);
-void crst_table_free_rcu(struct mm_struct *, unsigned long *);
unsigned long *page_table_alloc(struct mm_struct *);
void page_table_free(struct mm_struct *, unsigned long *);
-void page_table_free_rcu(struct mm_struct *, unsigned long *);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+void page_table_free_rcu(struct mmu_gather *, unsigned long *);
+void __tlb_remove_table(void *_table);
+#endif
static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
{
* swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
*/
-/* Page status table bits for virtualization */
-#define RCP_ACC_BITS 0xf000000000000000UL
-#define RCP_FP_BIT 0x0800000000000000UL
-#define RCP_PCL_BIT 0x0080000000000000UL
-#define RCP_HR_BIT 0x0040000000000000UL
-#define RCP_HC_BIT 0x0020000000000000UL
-#define RCP_GR_BIT 0x0004000000000000UL
-#define RCP_GC_BIT 0x0002000000000000UL
-
-/* User dirty / referenced bit for KVM's migration feature */
-#define KVM_UR_BIT 0x0000800000000000UL
-#define KVM_UC_BIT 0x0000400000000000UL
-
#ifndef __s390x__
/* Bits in the segment table address-space-control-element */
#define _SEGMENT_ENTRY (_SEGMENT_ENTRY_PTL)
#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV)
+/* Page status table bits for virtualization */
+#define RCP_ACC_BITS 0xf0000000UL
+#define RCP_FP_BIT 0x08000000UL
+#define RCP_PCL_BIT 0x00800000UL
+#define RCP_HR_BIT 0x00400000UL
+#define RCP_HC_BIT 0x00200000UL
+#define RCP_GR_BIT 0x00040000UL
+#define RCP_GC_BIT 0x00020000UL
+
+/* User dirty / referenced bit for KVM's migration feature */
+#define KVM_UR_BIT 0x00008000UL
+#define KVM_UC_BIT 0x00004000UL
+
#else /* __s390x__ */
/* Bits in the segment/region table address-space-control-element */
#define _SEGMENT_ENTRY_LARGE 0x400 /* STE-format control, large page */
#define _SEGMENT_ENTRY_CO 0x100 /* change-recording override */
+/* Page status table bits for virtualization */
+#define RCP_ACC_BITS 0xf000000000000000UL
+#define RCP_FP_BIT 0x0800000000000000UL
+#define RCP_PCL_BIT 0x0080000000000000UL
+#define RCP_HR_BIT 0x0040000000000000UL
+#define RCP_HC_BIT 0x0020000000000000UL
+#define RCP_GR_BIT 0x0004000000000000UL
+#define RCP_GC_BIT 0x0002000000000000UL
+
+/* User dirty / referenced bit for KVM's migration feature */
+#define KVM_UR_BIT 0x0000800000000000UL
+#define KVM_UC_BIT 0x0000400000000000UL
+
#endif /* __s390x__ */
/*
struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
} __attribute__ ((packed, aligned(2048)));
-/**
- * struct sbal_flags - storage block address list flags
- * @last: last entry
- * @cont: contiguous storage
- * @frag: fragmentation
- */
-struct sbal_flags {
- u8 : 1;
- u8 last : 1;
- u8 cont : 1;
- u8 : 1;
- u8 frag : 2;
- u8 : 2;
-} __attribute__ ((packed));
-
-#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL
-#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL
-#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL
-#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL
-#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL
+#define SBAL_EFLAGS_LAST_ENTRY 0x40
+#define SBAL_EFLAGS_CONTIGUOUS 0x20
+#define SBAL_EFLAGS_FIRST_FRAG 0x04
+#define SBAL_EFLAGS_MIDDLE_FRAG 0x08
+#define SBAL_EFLAGS_LAST_FRAG 0x0c
+#define SBAL_EFLAGS_MASK 0x6f
-#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL
+#define SBAL_SFLAGS0_PCI_REQ 0x40
+#define SBAL_SFLAGS0_DATA_CONTINUATION 0x20
/* Awesome OpenFCP extensions */
-#define SBAL_FLAGS0_TYPE_STATUS 0x00UL
-#define SBAL_FLAGS0_TYPE_WRITE 0x08UL
-#define SBAL_FLAGS0_TYPE_READ 0x10UL
-#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL
-#define SBAL_FLAGS0_MORE_SBALS 0x04UL
-#define SBAL_FLAGS0_COMMAND 0x02UL
-#define SBAL_FLAGS0_LAST_SBAL 0x00UL
-#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS
-#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_PCI 0x40
-
-/**
- * struct sbal_sbalf_0 - sbal flags for sbale 0
- * @pci: PCI indicator
- * @cont: data continuation
- * @sbtype: storage-block type (FCP)
- */
-struct sbal_sbalf_0 {
- u8 : 1;
- u8 pci : 1;
- u8 cont : 1;
- u8 sbtype : 2;
- u8 : 3;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_1 - sbal flags for sbale 1
- * @key: storage key
- */
-struct sbal_sbalf_1 {
- u8 : 4;
- u8 key : 4;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_14 - sbal flags for sbale 14
- * @erridx: error index
- */
-struct sbal_sbalf_14 {
- u8 : 4;
- u8 erridx : 4;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_15 - sbal flags for sbale 15
- * @reason: reason for error state
- */
-struct sbal_sbalf_15 {
- u8 reason;
-} __attribute__ ((packed));
-
-/**
- * union sbal_sbalf - storage block address list flags
- * @i0: sbalf0
- * @i1: sbalf1
- * @i14: sbalf14
- * @i15: sblaf15
- * @value: raw value
- */
-union sbal_sbalf {
- struct sbal_sbalf_0 i0;
- struct sbal_sbalf_1 i1;
- struct sbal_sbalf_14 i14;
- struct sbal_sbalf_15 i15;
- u8 value;
-};
+#define SBAL_SFLAGS0_TYPE_STATUS 0x00
+#define SBAL_SFLAGS0_TYPE_WRITE 0x08
+#define SBAL_SFLAGS0_TYPE_READ 0x10
+#define SBAL_SFLAGS0_TYPE_WRITE_READ 0x18
+#define SBAL_SFLAGS0_MORE_SBALS 0x04
+#define SBAL_SFLAGS0_COMMAND 0x02
+#define SBAL_SFLAGS0_LAST_SBAL 0x00
+#define SBAL_SFLAGS0_ONLY_SBAL SBAL_SFLAGS0_COMMAND
+#define SBAL_SFLAGS0_MIDDLE_SBAL SBAL_SFLAGS0_MORE_SBALS
+#define SBAL_SFLAGS0_FIRST_SBAL (SBAL_SFLAGS0_MORE_SBALS | SBAL_SFLAGS0_COMMAND)
/**
* struct qdio_buffer_element - SBAL entry
- * @flags: flags
+ * @eflags: SBAL entry flags
+ * @scount: SBAL count
+ * @sflags: whole SBAL flags
* @length: length
* @addr: address
*/
struct qdio_buffer_element {
- u32 flags;
+ u8 eflags;
+ /* private: */
+ u8 res1;
+ /* public: */
+ u8 scount;
+ u8 sflags;
u32 length;
#ifdef CONFIG_32BIT
/* private: */
- void *reserved;
+ void *res2;
/* public: */
#endif
void *addr;
#include <linux/swap.h>
#include <asm/processor.h>
#include <asm/pgalloc.h>
-#include <asm/smp.h>
#include <asm/tlbflush.h>
struct mmu_gather {
struct mm_struct *mm;
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ struct mmu_table_batch *batch;
+#endif
unsigned int fullmm;
- unsigned int nr_ptes;
- unsigned int nr_pxds;
- unsigned int max;
- void **array;
- void *local[8];
+ unsigned int need_flush;
};
-static inline void __tlb_alloc_page(struct mmu_gather *tlb)
-{
- unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+struct mmu_table_batch {
+ struct rcu_head rcu;
+ unsigned int nr;
+ void *tables[0];
+};
- if (addr) {
- tlb->array = (void *) addr;
- tlb->max = PAGE_SIZE / sizeof(void *);
- }
-}
+#define MAX_TABLE_BATCH \
+ ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
+
+extern void tlb_table_flush(struct mmu_gather *tlb);
+extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
+#endif
static inline void tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm,
unsigned int full_mm_flush)
{
tlb->mm = mm;
- tlb->max = ARRAY_SIZE(tlb->local);
- tlb->array = tlb->local;
tlb->fullmm = full_mm_flush;
+ tlb->need_flush = 0;
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ tlb->batch = NULL;
+#endif
if (tlb->fullmm)
__tlb_flush_mm(mm);
- else
- __tlb_alloc_page(tlb);
- tlb->nr_ptes = 0;
- tlb->nr_pxds = tlb->max;
}
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
- if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < tlb->max))
- __tlb_flush_mm(tlb->mm);
- while (tlb->nr_ptes > 0)
- page_table_free_rcu(tlb->mm, tlb->array[--tlb->nr_ptes]);
- while (tlb->nr_pxds < tlb->max)
- crst_table_free_rcu(tlb->mm, tlb->array[tlb->nr_pxds++]);
+ if (!tlb->need_flush)
+ return;
+ tlb->need_flush = 0;
+ __tlb_flush_mm(tlb->mm);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ tlb_table_flush(tlb);
+#endif
}
static inline void tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end)
{
tlb_flush_mmu(tlb);
-
- rcu_table_freelist_finish();
-
- /* keep the page table cache within bounds */
- check_pgt_cache();
-
- if (tlb->array != tlb->local)
- free_pages((unsigned long) tlb->array, 0);
}
/*
static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long address)
{
- if (!tlb->fullmm) {
- tlb->array[tlb->nr_ptes++] = pte;
- if (tlb->nr_ptes >= tlb->nr_pxds)
- tlb_flush_mmu(tlb);
- } else
- page_table_free(tlb->mm, (unsigned long *) pte);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ if (!tlb->fullmm)
+ return page_table_free_rcu(tlb, (unsigned long *) pte);
+#endif
+ page_table_free(tlb->mm, (unsigned long *) pte);
}
/*
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
return;
- if (!tlb->fullmm) {
- tlb->array[--tlb->nr_pxds] = pmd;
- if (tlb->nr_ptes >= tlb->nr_pxds)
- tlb_flush_mmu(tlb);
- } else
- crst_table_free(tlb->mm, (unsigned long *) pmd);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ if (!tlb->fullmm)
+ return tlb_remove_table(tlb, pmd);
+#endif
+ crst_table_free(tlb->mm, (unsigned long *) pmd);
#endif
}
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
return;
- if (!tlb->fullmm) {
- tlb->array[--tlb->nr_pxds] = pud;
- if (tlb->nr_ptes >= tlb->nr_pxds)
- tlb_flush_mmu(tlb);
- } else
- crst_table_free(tlb->mm, (unsigned long *) pud);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ if (!tlb->fullmm)
+ return tlb_remove_table(tlb, pud);
+#endif
+ crst_table_free(tlb->mm, (unsigned long *) pud);
#endif
}
}
memcpy(facilities, S390_lowcore.stfle_fac_list, 16);
facilities[0] &= 0xff00fff3f47c0000ULL;
+ facilities[1] &= 0x201c000000000000ULL;
return 0;
}
.section __ex_table,"a"
.quad sie_inst,sie_err
+ .quad sie_exit,sie_err
+ .quad sie_reenter,sie_err
.previous
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
-struct rcu_table_freelist {
- struct rcu_head rcu;
- struct mm_struct *mm;
- unsigned int pgt_index;
- unsigned int crst_index;
- unsigned long *table[0];
-};
-
-#define RCU_FREELIST_SIZE \
- ((PAGE_SIZE - sizeof(struct rcu_table_freelist)) \
- / sizeof(unsigned long))
-
-static DEFINE_PER_CPU(struct rcu_table_freelist *, rcu_table_freelist);
-
-static void __page_table_free(struct mm_struct *mm, unsigned long *table);
-
-static struct rcu_table_freelist *rcu_table_freelist_get(struct mm_struct *mm)
-{
- struct rcu_table_freelist **batchp = &__get_cpu_var(rcu_table_freelist);
- struct rcu_table_freelist *batch = *batchp;
-
- if (batch)
- return batch;
- batch = (struct rcu_table_freelist *) __get_free_page(GFP_ATOMIC);
- if (batch) {
- batch->mm = mm;
- batch->pgt_index = 0;
- batch->crst_index = RCU_FREELIST_SIZE;
- *batchp = batch;
- }
- return batch;
-}
-
-static void rcu_table_freelist_callback(struct rcu_head *head)
-{
- struct rcu_table_freelist *batch =
- container_of(head, struct rcu_table_freelist, rcu);
-
- while (batch->pgt_index > 0)
- __page_table_free(batch->mm, batch->table[--batch->pgt_index]);
- while (batch->crst_index < RCU_FREELIST_SIZE)
- crst_table_free(batch->mm, batch->table[batch->crst_index++]);
- free_page((unsigned long) batch);
-}
-
-void rcu_table_freelist_finish(void)
-{
- struct rcu_table_freelist **batchp = &get_cpu_var(rcu_table_freelist);
- struct rcu_table_freelist *batch = *batchp;
-
- if (!batch)
- goto out;
- call_rcu(&batch->rcu, rcu_table_freelist_callback);
- *batchp = NULL;
-out:
- put_cpu_var(rcu_table_freelist);
-}
-
-static void smp_sync(void *arg)
-{
-}
-
#ifndef CONFIG_64BIT
#define ALLOC_ORDER 1
-#define TABLES_PER_PAGE 4
-#define FRAG_MASK 15UL
-#define SECOND_HALVES 10UL
-
-void clear_table_pgstes(unsigned long *table)
-{
- clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/4);
- memset(table + 256, 0, PAGE_SIZE/4);
- clear_table(table + 512, _PAGE_TYPE_EMPTY, PAGE_SIZE/4);
- memset(table + 768, 0, PAGE_SIZE/4);
-}
-
+#define FRAG_MASK 0x0f
#else
#define ALLOC_ORDER 2
-#define TABLES_PER_PAGE 2
-#define FRAG_MASK 3UL
-#define SECOND_HALVES 2UL
-
-void clear_table_pgstes(unsigned long *table)
-{
- clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
- memset(table + 256, 0, PAGE_SIZE/2);
-}
-
+#define FRAG_MASK 0x03
#endif
unsigned long VMALLOC_START = VMALLOC_END - VMALLOC_SIZE;
free_pages((unsigned long) table, ALLOC_ORDER);
}
-void crst_table_free_rcu(struct mm_struct *mm, unsigned long *table)
-{
- struct rcu_table_freelist *batch;
-
- preempt_disable();
- if (atomic_read(&mm->mm_users) < 2 &&
- cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
- crst_table_free(mm, table);
- goto out;
- }
- batch = rcu_table_freelist_get(mm);
- if (!batch) {
- smp_call_function(smp_sync, NULL, 1);
- crst_table_free(mm, table);
- goto out;
- }
- batch->table[--batch->crst_index] = table;
- if (batch->pgt_index >= batch->crst_index)
- rcu_table_freelist_finish();
-out:
- preempt_enable();
-}
-
#ifdef CONFIG_64BIT
int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
{
}
#endif
+static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
+{
+ unsigned int old, new;
+
+ do {
+ old = atomic_read(v);
+ new = old ^ bits;
+ } while (atomic_cmpxchg(v, old, new) != old);
+ return new;
+}
+
/*
* page table entry allocation/free routines.
*/
+#ifdef CONFIG_PGSTE
+static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm)
+{
+ struct page *page;
+ unsigned long *table;
+
+ page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
+ if (!page)
+ return NULL;
+ pgtable_page_ctor(page);
+ atomic_set(&page->_mapcount, 3);
+ table = (unsigned long *) page_to_phys(page);
+ clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
+ clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2);
+ return table;
+}
+
+static inline void page_table_free_pgste(unsigned long *table)
+{
+ struct page *page;
+
+ page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+ pgtable_page_ctor(page);
+ atomic_set(&page->_mapcount, -1);
+ __free_page(page);
+}
+#endif
+
unsigned long *page_table_alloc(struct mm_struct *mm)
{
struct page *page;
unsigned long *table;
- unsigned long bits;
+ unsigned int mask, bit;
- bits = (mm->context.has_pgste) ? 3UL : 1UL;
+#ifdef CONFIG_PGSTE
+ if (mm_has_pgste(mm))
+ return page_table_alloc_pgste(mm);
+#endif
+ /* Allocate fragments of a 4K page as 1K/2K page table */
spin_lock_bh(&mm->context.list_lock);
- page = NULL;
+ mask = FRAG_MASK;
if (!list_empty(&mm->context.pgtable_list)) {
page = list_first_entry(&mm->context.pgtable_list,
struct page, lru);
- if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
- page = NULL;
+ table = (unsigned long *) page_to_phys(page);
+ mask = atomic_read(&page->_mapcount);
+ mask = mask | (mask >> 4);
}
- if (!page) {
+ if ((mask & FRAG_MASK) == FRAG_MASK) {
spin_unlock_bh(&mm->context.list_lock);
page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
if (!page)
return NULL;
pgtable_page_ctor(page);
- page->flags &= ~FRAG_MASK;
+ atomic_set(&page->_mapcount, 1);
table = (unsigned long *) page_to_phys(page);
- if (mm->context.has_pgste)
- clear_table_pgstes(table);
- else
- clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
+ clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
spin_lock_bh(&mm->context.list_lock);
list_add(&page->lru, &mm->context.pgtable_list);
+ } else {
+ for (bit = 1; mask & bit; bit <<= 1)
+ table += PTRS_PER_PTE;
+ mask = atomic_xor_bits(&page->_mapcount, bit);
+ if ((mask & FRAG_MASK) == FRAG_MASK)
+ list_del(&page->lru);
}
- table = (unsigned long *) page_to_phys(page);
- while (page->flags & bits) {
- table += 256;
- bits <<= 1;
- }
- page->flags |= bits;
- if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
- list_move_tail(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
return table;
}
-static void __page_table_free(struct mm_struct *mm, unsigned long *table)
+void page_table_free(struct mm_struct *mm, unsigned long *table)
{
struct page *page;
- unsigned long bits;
+ unsigned int bit, mask;
- bits = ((unsigned long) table) & 15;
- table = (unsigned long *)(((unsigned long) table) ^ bits);
+#ifdef CONFIG_PGSTE
+ if (mm_has_pgste(mm))
+ return page_table_free_pgste(table);
+#endif
+ /* Free 1K/2K page table fragment of a 4K page */
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
- page->flags ^= bits;
- if (!(page->flags & FRAG_MASK)) {
+ bit = 1 << ((__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t)));
+ spin_lock_bh(&mm->context.list_lock);
+ if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
+ list_del(&page->lru);
+ mask = atomic_xor_bits(&page->_mapcount, bit);
+ if (mask & FRAG_MASK)
+ list_add(&page->lru, &mm->context.pgtable_list);
+ spin_unlock_bh(&mm->context.list_lock);
+ if (mask == 0) {
pgtable_page_dtor(page);
+ atomic_set(&page->_mapcount, -1);
__free_page(page);
}
}
-void page_table_free(struct mm_struct *mm, unsigned long *table)
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+
+static void __page_table_free_rcu(void *table, unsigned bit)
{
struct page *page;
- unsigned long bits;
- bits = (mm->context.has_pgste) ? 3UL : 1UL;
- bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
+#ifdef CONFIG_PGSTE
+ if (bit == FRAG_MASK)
+ return page_table_free_pgste(table);
+#endif
+ /* Free 1K/2K page table fragment of a 4K page */
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
- spin_lock_bh(&mm->context.list_lock);
- page->flags ^= bits;
- if (page->flags & FRAG_MASK) {
- /* Page now has some free pgtable fragments. */
- if (!list_empty(&page->lru))
- list_move(&page->lru, &mm->context.pgtable_list);
- page = NULL;
- } else
- /* All fragments of the 4K page have been freed. */
- list_del(&page->lru);
- spin_unlock_bh(&mm->context.list_lock);
- if (page) {
+ if (atomic_xor_bits(&page->_mapcount, bit) == 0) {
pgtable_page_dtor(page);
+ atomic_set(&page->_mapcount, -1);
__free_page(page);
}
}
-void page_table_free_rcu(struct mm_struct *mm, unsigned long *table)
+void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table)
{
- struct rcu_table_freelist *batch;
+ struct mm_struct *mm;
struct page *page;
- unsigned long bits;
+ unsigned int bit, mask;
- preempt_disable();
- if (atomic_read(&mm->mm_users) < 2 &&
- cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
- page_table_free(mm, table);
- goto out;
- }
- batch = rcu_table_freelist_get(mm);
- if (!batch) {
- smp_call_function(smp_sync, NULL, 1);
- page_table_free(mm, table);
- goto out;
+ mm = tlb->mm;
+#ifdef CONFIG_PGSTE
+ if (mm_has_pgste(mm)) {
+ table = (unsigned long *) (__pa(table) | FRAG_MASK);
+ tlb_remove_table(tlb, table);
+ return;
}
- bits = (mm->context.has_pgste) ? 3UL : 1UL;
- bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
+#endif
+ bit = 1 << ((__pa(table) & ~PAGE_MASK) / (PTRS_PER_PTE*sizeof(pte_t)));
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
spin_lock_bh(&mm->context.list_lock);
- /* Delayed freeing with rcu prevents reuse of pgtable fragments */
- list_del_init(&page->lru);
+ if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
+ list_del(&page->lru);
+ mask = atomic_xor_bits(&page->_mapcount, bit | (bit << 4));
+ if (mask & FRAG_MASK)
+ list_add_tail(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
- table = (unsigned long *)(((unsigned long) table) | bits);
- batch->table[batch->pgt_index++] = table;
- if (batch->pgt_index >= batch->crst_index)
- rcu_table_freelist_finish();
-out:
- preempt_enable();
+ table = (unsigned long *) (__pa(table) | (bit << 4));
+ tlb_remove_table(tlb, table);
}
+void __tlb_remove_table(void *_table)
+{
+ void *table = (void *)((unsigned long) _table & PAGE_MASK);
+ unsigned type = (unsigned long) _table & ~PAGE_MASK;
+
+ if (type)
+ __page_table_free_rcu(table, type);
+ else
+ free_pages((unsigned long) table, ALLOC_ORDER);
+}
+
+#endif
+
/*
* switch on pgstes for its userspace process (for kvm)
*/
return -EINVAL;
/* Do we have pgstes? if yes, we are done */
- if (tsk->mm->context.has_pgste)
+ if (mm_has_pgste(tsk->mm))
return 0;
/* lets check if we are allowed to replace the mm */
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/spi/spi.h>
.resource = usb1_common_resources,
};
+/*
+ * USBHS
+ */
+static int usbhs_get_id(struct platform_device *pdev)
+{
+ return gpio_get_value(GPIO_PTB3);
+}
+
+static struct renesas_usbhs_platform_info usbhs_info = {
+ .platform_callback = {
+ .get_id = usbhs_get_id,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ .detection_delay = 5,
+ },
+};
+
+static struct resource usbhs_resources[] = {
+ [0] = {
+ .start = 0xa4d90000,
+ .end = 0xa4d90124 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs_device = {
+ .name = "renesas_usbhs",
+ .id = 1,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbhs_info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs_resources),
+ .resource = usbhs_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_USB1,
+ },
+};
+
/* LCDC */
const static struct fb_videomode ecovec_lcd_modes[] = {
{
&sh_eth_device,
&usb0_host_device,
&usb1_common_device,
+ &usbhs_device,
&lcdc_device,
&ceu0_device,
&ceu1_device,
$(CONFIG_BOOT_LINK_OFFSET)]')
endif
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
ifeq ($(CONFIG_MCOUNT),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
-T $(obj)/../../kernel/vmlinux.lds
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+#
+# Pull in the necessary libgcc bits from the in-kernel implementation.
+#
+lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \
+ lshrsi3.S
+lib1funcs-obj := \
+ $(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
+
+lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib
+ifeq ($(BITS),64)
+ lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir))
+endif
+
+KBUILD_CFLAGS += -I$(lib1funcs-dir)
+
+$(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE
+ $(call cmd,shipped)
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(lib1funcs-obj) FORCE
$(call if_changed,ld)
@:
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_PL2303=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SH=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
" mov.l %2, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
: "=&r" (retval),
- "+r" (m)
- : "r" (val)
+ "+r" (m),
+ "+r" (val) /* inhibit r15 overloading */
+ :
: "memory", "r0", "r1");
return retval;
" mov.b %2, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
: "=&r" (retval),
- "+r" (m)
- : "r" (val)
+ "+r" (m),
+ "+r" (val) /* inhibit r15 overloading */
+ :
: "memory" , "r0", "r1");
return retval;
" nop \n\t"
" mov r15, r1 \n\t" /* r1 = saved sp */
" mov #-8, r15 \n\t" /* LOGIN */
- " mov.l @%1, %0 \n\t" /* load old value */
- " cmp/eq %0, %2 \n\t"
+ " mov.l @%3, %0 \n\t" /* load old value */
+ " cmp/eq %0, %1 \n\t"
" bf 1f \n\t" /* if not equal */
- " mov.l %3, @%1 \n\t" /* store new value */
+ " mov.l %2, @%3 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval)
- : "r" (m), "r" (old), "r" (new)
+ : "=&r" (retval),
+ "+r" (old), "+r" (new) /* old or new can be r15 */
+ : "r" (m)
: "memory" , "r0", "r1", "t");
return retval;
#define SR_USER (SR_MMU | SR_FD)
#define start_thread(_regs, new_pc, new_sp) \
- set_fs(USER_DS); \
_regs->sr = SR_USER; /* User mode. */ \
_regs->pc = new_pc - 4; /* Compensate syscall exit */ \
_regs->pc |= 1; /* Set SHmedia ! */ \
SHDMA_SLAVE_SCIF4_RX,
SHDMA_SLAVE_SCIF5_TX,
SHDMA_SLAVE_SCIF5_RX,
+ SHDMA_SLAVE_USB0D0_TX,
+ SHDMA_SLAVE_USB0D0_RX,
+ SHDMA_SLAVE_USB0D1_TX,
+ SHDMA_SLAVE_USB0D1_RX,
+ SHDMA_SLAVE_USB1D0_TX,
+ SHDMA_SLAVE_USB1D0_RX,
+ SHDMA_SLAVE_USB1D1_TX,
+ SHDMA_SLAVE_USB1D1_RX,
SHDMA_SLAVE_SDHI0_TX,
SHDMA_SLAVE_SDHI0_RX,
SHDMA_SLAVE_SDHI1_TX,
.addr = 0xa4e50024,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x36,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D0_TX,
+ .addr = 0xA4D80100,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x73,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D0_RX,
+ .addr = 0xA4D80100,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x73,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D1_TX,
+ .addr = 0xA4D80120,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x77,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D1_RX,
+ .addr = 0xA4D80120,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x77,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D0_TX,
+ .addr = 0xA4D90100,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xab,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D0_RX,
+ .addr = 0xA4D90100,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xab,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D1_TX,
+ .addr = 0xA4D90120,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xaf,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D1_RX,
+ .addr = 0xA4D90120,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xaf,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0x04ce0030,
void start_thread(struct pt_regs *regs, unsigned long new_pc,
unsigned long new_sp)
{
- set_fs(USER_DS);
-
regs->pr = 0;
regs->sr = SR_FD;
regs->pc = new_pc;
{
unsigned int cache_type = (unsigned int)file->private;
struct cache_info *cache;
- unsigned int waysize, way, cache_size;
- unsigned long ccr, base;
- static unsigned long addrstart = 0;
+ unsigned int waysize, way;
+ unsigned long ccr;
+ unsigned long addrstart = 0;
/*
* Go uncached immediately so we don't skew the results any
}
if (cache_type == CACHE_TYPE_DCACHE) {
- base = CACHE_OC_ADDRESS_ARRAY;
+ addrstart = CACHE_OC_ADDRESS_ARRAY;
cache = ¤t_cpu_data.dcache;
} else {
- base = CACHE_IC_ADDRESS_ARRAY;
+ addrstart = CACHE_IC_ADDRESS_ARRAY;
cache = ¤t_cpu_data.icache;
}
- /*
- * Due to the amount of data written out (depending on the cache size),
- * we may be iterated over multiple times. In this case, keep track of
- * the entry position in addrstart, and rewind it when we've hit the
- * end of the cache.
- *
- * Likewise, the same code is used for multiple caches, so care must
- * be taken for bouncing addrstart back and forth so the appropriate
- * cache is hit.
- */
- cache_size = cache->ways * cache->sets * cache->linesz;
- if (((addrstart & 0xff000000) != base) ||
- (addrstart & 0x00ffffff) > cache_size)
- addrstart = base;
-
waysize = cache->sets;
/*
select HAVE_DMA_API_DEBUG
select HAVE_ARCH_JUMP_LABEL
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select USE_GENERIC_SMP_HELPERS if SMP
config PCI_SYSCALL
def_bool PCI
+config PCIC_PCI
+ bool
+ depends on PCI && SPARC32 && !SPARC_LEON
+ default y
+
+config LEON_PCI
+ bool
+ depends on PCI && SPARC_LEON
+ default y
+
+config GRPCI2
+ bool "GRPCI2 Host Bridge Support"
+ depends on LEON_PCI
+ default y
+ help
+ Say Y here to include the GRPCI2 Host Bridge Driver.
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
return sun_fdc->data_82072;
case 7: /* FD_DIR */
return sun_read_dir();
- };
+ }
panic("sun_82072_fd_inb: How did I get here?");
}
case 4: /* FD_STATUS */
sun_fdc->status_82072 = value;
break;
- };
+ }
return;
}
return sun_fdc->data_82077;
case 7: /* FD_DIR */
return sun_read_dir();
- };
+ }
panic("sun_82077_fd_inb: How did I get here?");
}
case 3: /* FD_TDR */
sun_fdc->tapectl_82077 = value;
break;
- };
+ }
return;
}
case 7: /* FD_DIR */
/* XXX: Is DCL on 0x80 in sun4m? */
return sbus_readb(&sun_fdc->dir_82077);
- };
+ }
panic("sun_82072_fd_inb: How did I get here?");
}
case 4: /* FD_STATUS */
sbus_writeb(value, &sun_fdc->status_82077);
break;
- };
+ }
return;
}
extern unsigned int leon_build_device_irq(unsigned int real_irq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack);
+extern void leon_update_virq_handling(unsigned int virq,
+ irq_flow_handler_t flow_handler,
+ const char *name, int do_ack);
extern void leon_clear_clock_irq(void);
extern void leon_load_profile_irq(int cpu, unsigned int limit);
extern void leon_init_timers(irq_handler_t counter_fn);
--- /dev/null
+/*
+ * asm/leon_pci.h
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ */
+
+#ifndef _ASM_LEON_PCI_H_
+#define _ASM_LEON_PCI_H_
+
+/* PCI related definitions */
+struct leon_pci_info {
+ struct pci_ops *ops;
+ struct resource io_space;
+ struct resource mem_space;
+ int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+extern void leon_pci_init(struct platform_device *ofdev,
+ struct leon_pci_info *info);
+
+#endif /* _ASM_LEON_PCI_H_ */
#endif /* __KERNEL__ */
+#ifndef CONFIG_LEON_PCI
/* generic pci stuff */
#include <asm-generic/pci.h>
+#else
+/*
+ * On LEON PCI Memory space is mapped 1:1 with physical address space.
+ *
+ * I/O space is located at low 64Kbytes in PCI I/O space. The I/O addresses
+ * are converted into CPU addresses to virtual addresses that are mapped with
+ * MMU to the PCI Host PCI I/O space window which are translated to the low
+ * 64Kbytes by the Host controller.
+ */
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return PCI_IRQ_NONE;
+}
+#endif
#endif /* __SPARC_PCI_H */
int pcic_imdim;
};
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCIC_PCI
extern int pcic_present(void);
extern int pcic_probe(void);
extern void pci_time_init(void);
switch (size) {
case 4:
return xchg_u32(ptr, x);
- };
+ }
__xchg_called_with_bad_pointer();
return x;
}
return xchg32(ptr, x);
case 8:
return xchg64(ptr, x);
- };
+ }
__xchg_called_with_bad_pointer();
return x;
}
obj-y += dma.o
-obj-$(CONFIG_SPARC32_PCI) += pcic.o
+obj-$(CONFIG_PCIC_PCI) += pcic.o
+obj-$(CONFIG_LEON_PCI) += leon_pci.o
+obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
default:
return -EINVAL;
- };
+ }
return 0;
}
break;
default:
panic("Can't set AUXIO register on this machine.");
- };
+ }
spin_unlock_irqrestore(&auxio_lock, flags);
}
EXPORT_SYMBOL(set_auxio);
case 0x0:
bp->interleave = 16;
break;
- };
+ }
/* UK[10] is reserved, and UK[11] is not set for the SDRAM
* bank size definition.
#ifdef CONFIG_SMP
.globl patchme_maybe_smp_msg
- cmp %l7, 12
+ cmp %l7, 11
patchme_maybe_smp_msg:
bgu maybe_smp4m_msg
nop
WRITE_PAUSE
wr %l4, PSR_ET, %psr
WRITE_PAUSE
- sll %o2, 28, %o2 ! shift for simpler checks below
+ sll %o3, 28, %o2 ! shift for simpler checks below
maybe_smp4m_msg_check_single:
andcc %o2, 0x1, %g0
beq,a maybe_smp4m_msg_check_mask
retl
nop
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCIC_PCI
#include <asm/pcic.h>
.align 4
rd %psr, %l0
.word 0
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCIC_PCI */
.globl flushw_all
flushw_all:
return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0);
}
+void leon_update_virq_handling(unsigned int virq,
+ irq_flow_handler_t flow_handler,
+ const char *name, int do_ack)
+{
+ unsigned long mask = (unsigned long)irq_get_chip_data(virq);
+
+ mask &= ~LEON_DO_ACK_HW;
+ if (do_ack)
+ mask |= LEON_DO_ACK_HW;
+
+ irq_set_chip_and_handler_name(virq, &leon_irq,
+ flow_handler, name);
+ irq_set_chip_data(virq, (void *)mask);
+}
+
void __init leon_init_timers(irq_handler_t counter_fn)
{
int irq, eirq;
prom_halt();
}
+#ifdef CONFIG_SMP
+ {
+ unsigned long flags;
+
+ /*
+ * In SMP, sun4m adds a IPI handler to IRQ trap handler that
+ * LEON never must take, sun4d and LEON overwrites the branch
+ * with a NOP.
+ */
+ local_irq_save(flags);
+ patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
+ local_flush_cache_all();
+ local_irq_restore(flags);
+ }
+#endif
+
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |
--- /dev/null
+/*
+ * leon_pci.c: LEON Host PCI support
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ *
+ * Code is partially derived from pcic.c
+ */
+
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/leon.h>
+#include <asm/leon_pci.h>
+
+/* The LEON architecture does not rely on a BIOS or bootloader to setup
+ * PCI for us. The Linux generic routines are used to setup resources,
+ * reset values of confuration-space registers settings ae preseved.
+ */
+void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
+{
+ struct pci_bus *root_bus;
+
+ root_bus = pci_scan_bus_parented(&ofdev->dev, 0, info->ops, info);
+ if (root_bus) {
+ root_bus->resource[0] = &info->io_space;
+ root_bus->resource[1] = &info->mem_space;
+ root_bus->resource[2] = NULL;
+
+ /* Init all PCI devices into PCI tree */
+ pci_bus_add_devices(root_bus);
+
+ /* Setup IRQs of all devices using custom routines */
+ pci_fixup_irqs(pci_common_swizzle, info->map_irq);
+
+ /* Assign devices with resources */
+ pci_assign_unassigned_resources();
+ }
+}
+
+/* PCI Memory and Prefetchable Memory is direct-mapped. However I/O Space is
+ * accessed through a Window which is translated to low 64KB in PCI space, the
+ * first 4KB is not used so 60KB is available.
+ *
+ * This function is used by generic code to translate resource addresses into
+ * PCI addresses.
+ */
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ struct leon_pci_info *info = dev->bus->sysdata;
+
+ region->start = res->start;
+ region->end = res->end;
+
+ if (res->flags & IORESOURCE_IO) {
+ region->start -= (info->io_space.start - 0x1000);
+ region->end -= (info->io_space.start - 0x1000);
+ }
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+/* see pcibios_resource_to_bus() comment */
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ struct leon_pci_info *info = dev->bus->sysdata;
+
+ res->start = region->start;
+ res->end = region->end;
+
+ if (res->flags & IORESOURCE_IO) {
+ res->start += (info->io_space.start - 0x1000);
+ res->end += (info->io_space.start - 0x1000);
+ }
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
+{
+ struct leon_pci_info *info = pbus->sysdata;
+ struct pci_dev *dev;
+ int i, has_io, has_mem;
+ u16 cmd;
+
+ /* Generic PCI bus probing sets these to point at
+ * &io{port,mem}_resouce which is wrong for us.
+ */
+ if (pbus->self == NULL) {
+ pbus->resource[0] = &info->io_space;
+ pbus->resource[1] = &info->mem_space;
+ pbus->resource[2] = NULL;
+ }
+
+ list_for_each_entry(dev, &pbus->devices, bus_list) {
+ /*
+ * We can not rely on that the bootloader has enabled I/O
+ * or memory access to PCI devices. Instead we enable it here
+ * if the device has BARs of respective type.
+ */
+ has_io = has_mem = 0;
+ for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+ unsigned long f = dev->resource[i].flags;
+ if (f & IORESOURCE_IO)
+ has_io = 1;
+ else if (f & IORESOURCE_MEM)
+ has_mem = 1;
+ }
+ /* ROM BARs are mapped into 32-bit memory space */
+ if (dev->resource[PCI_ROM_RESOURCE].end != 0) {
+ dev->resource[PCI_ROM_RESOURCE].flags |=
+ IORESOURCE_ROM_ENABLE;
+ has_mem = 1;
+ }
+ pci_bus_read_config_word(pbus, dev->devfn, PCI_COMMAND, &cmd);
+ if (has_io && !(cmd & PCI_COMMAND_IO)) {
+#ifdef CONFIG_PCI_DEBUG
+ printk(KERN_INFO "LEONPCI: Enabling I/O for dev %s\n",
+ pci_name(dev));
+#endif
+ cmd |= PCI_COMMAND_IO;
+ pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND,
+ cmd);
+ }
+ if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
+#ifdef CONFIG_PCI_DEBUG
+ printk(KERN_INFO "LEONPCI: Enabling MEMORY for dev"
+ "%s\n", pci_name(dev));
+#endif
+ cmd |= PCI_COMMAND_MEMORY;
+ pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND,
+ cmd);
+ }
+ }
+}
+
+/*
+ * Other archs parse arguments here.
+ */
+char * __devinit pcibios_setup(char *str)
+{
+ return str;
+}
+
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ return pci_enable_resources(dev, mask);
+}
+
+struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+ /*
+ * Currently the OpenBoot nodes are not connected with the PCI device,
+ * this is because the LEON PROM does not create PCI nodes. Eventually
+ * this will change and the same approach as pcic.c can be used to
+ * match PROM nodes with pci devices.
+ */
+ return NULL;
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+#ifdef CONFIG_PCI_DEBUG
+ printk(KERN_DEBUG "LEONPCI: Assigning IRQ %02d to %s\n", irq,
+ pci_name(dev));
+#endif
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/* in/out routines taken from pcic.c
+ *
+ * This probably belongs here rather than ioport.c because
+ * we do not want this crud linked into SBus kernels.
+ * Also, think for a moment about likes of floppy.c that
+ * include architecture specific parts. They may want to redefine ins/outs.
+ *
+ * We do not use horrible macros here because we want to
+ * advance pointer by sizeof(size).
+ */
+void outsb(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 1;
+ outb(*(const char *)src, addr);
+ src += 1;
+ /* addr += 1; */
+ }
+}
+EXPORT_SYMBOL(outsb);
+
+void outsw(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 2;
+ outw(*(const short *)src, addr);
+ src += 2;
+ /* addr += 2; */
+ }
+}
+EXPORT_SYMBOL(outsw);
+
+void outsl(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 4;
+ outl(*(const long *)src, addr);
+ src += 4;
+ /* addr += 4; */
+ }
+}
+EXPORT_SYMBOL(outsl);
+
+void insb(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 1;
+ *(unsigned char *)dst = inb(addr);
+ dst += 1;
+ /* addr += 1; */
+ }
+}
+EXPORT_SYMBOL(insb);
+
+void insw(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 2;
+ *(unsigned short *)dst = inw(addr);
+ dst += 2;
+ /* addr += 2; */
+ }
+}
+EXPORT_SYMBOL(insw);
+
+void insl(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 4;
+ /*
+ * XXX I am sure we are in for an unaligned trap here.
+ */
+ *(unsigned long *)dst = inl(addr);
+ dst += 4;
+ /* addr += 4; */
+ }
+}
+EXPORT_SYMBOL(insl);
--- /dev/null
+/*
+ * leon_pci_grpci2.c: GRPCI2 Host PCI driver
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ *
+ */
+
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/leon.h>
+#include <asm/vaddrs.h>
+#include <asm/sections.h>
+#include <asm/leon_pci.h>
+
+#include "irq.h"
+
+struct grpci2_barcfg {
+ unsigned long pciadr; /* PCI Space Address */
+ unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */
+};
+
+/* Device Node Configuration options:
+ * - barcfgs : Custom Configuration of Host's 6 target BARs
+ * - irq_mask : Limit which PCI interrupts are enabled
+ * - do_reset : Force PCI Reset on startup
+ *
+ * barcfgs
+ * =======
+ *
+ * Optional custom Target BAR configuration (see struct grpci2_barcfg). All
+ * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
+ *
+ * -1 means not configured (let host driver do default setup).
+ *
+ * [i*2+0] = PCI Address of BAR[i] on target interface
+ * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
+ *
+ *
+ * irq_mask
+ * ========
+ *
+ * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
+ * all are enabled. Use this when PCI interrupt pins are floating on PCB.
+ * int, len=4.
+ * bit0 = PCI INTA#
+ * bit1 = PCI INTB#
+ * bit2 = PCI INTC#
+ * bit3 = PCI INTD#
+ *
+ *
+ * reset
+ * =====
+ *
+ * Force PCI reset on startup. int, len=4
+ */
+
+/* Enable Debugging Configuration Space Access */
+#undef GRPCI2_DEBUG_CFGACCESS
+
+/*
+ * GRPCI2 APB Register MAP
+ */
+struct grpci2_regs {
+ unsigned int ctrl; /* 0x00 Control */
+ unsigned int sts_cap; /* 0x04 Status / Capabilities */
+ int res1; /* 0x08 */
+ unsigned int io_map; /* 0x0C I/O Map address */
+ unsigned int dma_ctrl; /* 0x10 DMA */
+ unsigned int dma_bdbase; /* 0x14 DMA */
+ int res2[2]; /* 0x18 */
+ unsigned int bars[6]; /* 0x20 read-only PCI BARs */
+ int res3[2]; /* 0x38 */
+ unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */
+
+ /* PCI Trace Buffer Registers (OPTIONAL) */
+ unsigned int t_ctrl; /* 0x80 */
+ unsigned int t_cnt; /* 0x84 */
+ unsigned int t_adpat; /* 0x88 */
+ unsigned int t_admask; /* 0x8C */
+ unsigned int t_sigpat; /* 0x90 */
+ unsigned int t_sigmask; /* 0x94 */
+ unsigned int t_adstate; /* 0x98 */
+ unsigned int t_sigstate; /* 0x9C */
+};
+
+#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
+#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
+
+#define CTRL_BUS_BIT 16
+
+#define CTRL_RESET (1<<31)
+#define CTRL_SI (1<<27)
+#define CTRL_PE (1<<26)
+#define CTRL_EI (1<<25)
+#define CTRL_ER (1<<24)
+#define CTRL_BUS (0xff<<CTRL_BUS_BIT)
+#define CTRL_HOSTINT 0xf
+
+#define STS_HOST_BIT 31
+#define STS_MST_BIT 30
+#define STS_TAR_BIT 29
+#define STS_DMA_BIT 28
+#define STS_DI_BIT 27
+#define STS_HI_BIT 26
+#define STS_IRQMODE_BIT 24
+#define STS_TRACE_BIT 23
+#define STS_CFGERRVALID_BIT 20
+#define STS_CFGERR_BIT 19
+#define STS_INTTYPE_BIT 12
+#define STS_INTSTS_BIT 8
+#define STS_FDEPTH_BIT 2
+#define STS_FNUM_BIT 0
+
+#define STS_HOST (1<<STS_HOST_BIT)
+#define STS_MST (1<<STS_MST_BIT)
+#define STS_TAR (1<<STS_TAR_BIT)
+#define STS_DMA (1<<STS_DMA_BIT)
+#define STS_DI (1<<STS_DI_BIT)
+#define STS_HI (1<<STS_HI_BIT)
+#define STS_IRQMODE (0x3<<STS_IRQMODE_BIT)
+#define STS_TRACE (1<<STS_TRACE_BIT)
+#define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT)
+#define STS_CFGERR (1<<STS_CFGERR_BIT)
+#define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT)
+#define STS_INTSTS (0xf<<STS_INTSTS_BIT)
+#define STS_FDEPTH (0x7<<STS_FDEPTH_BIT)
+#define STS_FNUM (0x3<<STS_FNUM_BIT)
+
+#define STS_ISYSERR (1<<17)
+#define STS_IDMA (1<<16)
+#define STS_IDMAERR (1<<15)
+#define STS_IMSTABRT (1<<14)
+#define STS_ITGTABRT (1<<13)
+#define STS_IPARERR (1<<12)
+
+#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
+
+struct grpci2_bd_chan {
+ unsigned int ctrl; /* 0x00 DMA Control */
+ unsigned int nchan; /* 0x04 Next DMA Channel Address */
+ unsigned int nbd; /* 0x08 Next Data Descriptor in chan */
+ unsigned int res; /* 0x0C Reserved */
+};
+
+#define BD_CHAN_EN 0x80000000
+#define BD_CHAN_TYPE 0x00300000
+#define BD_CHAN_BDCNT 0x0000ffff
+#define BD_CHAN_EN_BIT 31
+#define BD_CHAN_TYPE_BIT 20
+#define BD_CHAN_BDCNT_BIT 0
+
+struct grpci2_bd_data {
+ unsigned int ctrl; /* 0x00 DMA Data Control */
+ unsigned int pci_adr; /* 0x04 PCI Start Address */
+ unsigned int ahb_adr; /* 0x08 AHB Start address */
+ unsigned int next; /* 0x0C Next Data Descriptor in chan */
+};
+
+#define BD_DATA_EN 0x80000000
+#define BD_DATA_IE 0x40000000
+#define BD_DATA_DR 0x20000000
+#define BD_DATA_TYPE 0x00300000
+#define BD_DATA_ER 0x00080000
+#define BD_DATA_LEN 0x0000ffff
+#define BD_DATA_EN_BIT 31
+#define BD_DATA_IE_BIT 30
+#define BD_DATA_DR_BIT 29
+#define BD_DATA_TYPE_BIT 20
+#define BD_DATA_ER_BIT 19
+#define BD_DATA_LEN_BIT 0
+
+/* GRPCI2 Capability */
+struct grpci2_cap_first {
+ unsigned int ctrl;
+ unsigned int pci2ahb_map[6];
+ unsigned int ext2ahb_map;
+ unsigned int io_map;
+ unsigned int pcibar_size[6];
+};
+#define CAP9_CTRL_OFS 0
+#define CAP9_BAR_OFS 0x4
+#define CAP9_IOMAP_OFS 0x20
+#define CAP9_BARSIZE_OFS 0x24
+
+struct grpci2_priv {
+ struct leon_pci_info info; /* must be on top of this structure */
+ struct grpci2_regs *regs;
+ char irq;
+ char irq_mode; /* IRQ Mode from CAPSTS REG */
+ char bt_enabled;
+ char do_reset;
+ char irq_mask;
+ u32 pciid; /* PCI ID of Host */
+ unsigned char irq_map[4];
+
+ /* Virtual IRQ numbers */
+ unsigned int virq_err;
+ unsigned int virq_dma;
+
+ /* AHB PCI Windows */
+ unsigned long pci_area; /* MEMORY */
+ unsigned long pci_area_end;
+ unsigned long pci_io; /* I/O */
+ unsigned long pci_conf; /* CONFIGURATION */
+ unsigned long pci_conf_end;
+ unsigned long pci_io_va;
+
+ struct grpci2_barcfg tgtbars[6];
+};
+
+DEFINE_SPINLOCK(grpci2_dev_lock);
+struct grpci2_priv *grpci2priv;
+
+int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct grpci2_priv *priv = dev->bus->sysdata;
+ int irq_group;
+
+ /* Use default IRQ decoding on PCI BUS0 according slot numbering */
+ irq_group = slot & 0x3;
+ pin = ((pin - 1) + irq_group) & 0x3;
+
+ return priv->irq_map[pin];
+}
+
+static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ unsigned int *pci_conf;
+ unsigned long flags;
+ u32 tmp;
+
+ if (where & 0x3)
+ return -EINVAL;
+
+ if (bus == 0 && PCI_SLOT(devfn) != 0)
+ devfn += (0x8 * 6);
+
+ /* Select bus */
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+ (bus << 16));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+ /* clear old status */
+ REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+ pci_conf = (unsigned int *) (priv->pci_conf |
+ (devfn << 8) | (where & 0xfc));
+ tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
+
+ /* Wait until GRPCI2 signals that CFG access is done, it should be
+ * done instantaneously unless a DMA operation is ongoing...
+ */
+ while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+ ;
+
+ if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
+ *val = 0xffffffff;
+ } else {
+ /* Bus always little endian (unaffected by byte-swapping) */
+ *val = flip_dword(tmp);
+ }
+
+ return 0;
+}
+
+static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ u32 v;
+ int ret;
+
+ if (where & 0x1)
+ return -EINVAL;
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ *val = 0xffff & (v >> (8 * (where & 0x3)));
+ return ret;
+}
+
+static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ u32 v;
+ int ret;
+
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ *val = 0xff & (v >> (8 * (where & 3)));
+
+ return ret;
+}
+
+static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ unsigned int *pci_conf;
+ unsigned long flags;
+
+ if (where & 0x3)
+ return -EINVAL;
+
+ if (bus == 0 && PCI_SLOT(devfn) != 0)
+ devfn += (0x8 * 6);
+
+ /* Select bus */
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+ (bus << 16));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+ /* clear old status */
+ REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+ pci_conf = (unsigned int *) (priv->pci_conf |
+ (devfn << 8) | (where & 0xfc));
+ LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
+
+ /* Wait until GRPCI2 signals that CFG access is done, it should be
+ * done instantaneously unless a DMA operation is ongoing...
+ */
+ while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+ ;
+
+ return 0;
+}
+
+static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ int ret;
+ u32 v;
+
+ if (where & 0x1)
+ return -EINVAL;
+ ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
+ if (ret)
+ return ret;
+ v = (v & ~(0xffff << (8 * (where & 0x3)))) |
+ ((0xffff & val) << (8 * (where & 0x3)));
+ return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ int ret;
+ u32 v;
+
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ if (ret != 0)
+ return ret;
+ v = (v & ~(0xff << (8 * (where & 0x3)))) |
+ ((0xff & val) << (8 * (where & 0x3)));
+ return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+/* Read from Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ unsigned int busno = bus->number;
+ int ret;
+
+ if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+ *val = ~0;
+ return 0;
+ }
+
+ switch (size) {
+ case 1:
+ ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
+ break;
+ case 2:
+ ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
+ break;
+ case 4:
+ ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+ printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
+ "size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
+ *val, size);
+#endif
+
+ return ret;
+}
+
+/* Write to Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ unsigned int busno = bus->number;
+
+ if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+ return 0;
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+ printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
+ "val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ where, size, val);
+#endif
+
+ switch (size) {
+ default:
+ return -EINVAL;
+ case 1:
+ return grpci2_cfg_w8(priv, busno, devfn, where, val);
+ case 2:
+ return grpci2_cfg_w16(priv, busno, devfn, where, val);
+ case 4:
+ return grpci2_cfg_w32(priv, busno, devfn, where, val);
+ }
+}
+
+static struct pci_ops grpci2_ops = {
+ .read = grpci2_read_config,
+ .write = grpci2_write_config,
+};
+
+/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
+ * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
+ * this is not needed and the standard IRQ controller can be used.
+ */
+
+static void grpci2_mask_irq(struct irq_data *data)
+{
+ unsigned long flags;
+ unsigned int irqidx;
+ struct grpci2_priv *priv = grpci2priv;
+
+ irqidx = (unsigned int)data->chip_data - 1;
+ if (irqidx > 3) /* only mask PCI interrupts here */
+ return;
+
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static void grpci2_unmask_irq(struct irq_data *data)
+{
+ unsigned long flags;
+ unsigned int irqidx;
+ struct grpci2_priv *priv = grpci2priv;
+
+ irqidx = (unsigned int)data->chip_data - 1;
+ if (irqidx > 3) /* only unmask PCI interrupts here */
+ return;
+
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static unsigned int grpci2_startup_irq(struct irq_data *data)
+{
+ grpci2_unmask_irq(data);
+ return 0;
+}
+
+static void grpci2_shutdown_irq(struct irq_data *data)
+{
+ grpci2_mask_irq(data);
+}
+
+static struct irq_chip grpci2_irq = {
+ .name = "grpci2",
+ .irq_startup = grpci2_startup_irq,
+ .irq_shutdown = grpci2_shutdown_irq,
+ .irq_mask = grpci2_mask_irq,
+ .irq_unmask = grpci2_unmask_irq,
+};
+
+/* Handle one or multiple IRQs from the PCI core */
+static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ int i, ack = 0;
+ unsigned int ctrl, sts_cap, pci_ints;
+
+ ctrl = REGLOAD(priv->regs->ctrl);
+ sts_cap = REGLOAD(priv->regs->sts_cap);
+
+ /* Error Interrupt? */
+ if (sts_cap & STS_ERR_IRQ) {
+ generic_handle_irq(priv->virq_err);
+ ack = 1;
+ }
+
+ /* PCI Interrupt? */
+ pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
+ if (pci_ints) {
+ /* Call respective PCI Interrupt handler */
+ for (i = 0; i < 4; i++) {
+ if (pci_ints & (1 << i))
+ generic_handle_irq(priv->irq_map[i]);
+ }
+ ack = 1;
+ }
+
+ /*
+ * Decode DMA Interrupt only when shared with Err and PCI INTX#, when
+ * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
+ * goes directly to DMA ISR.
+ */
+ if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
+ generic_handle_irq(priv->virq_dma);
+ ack = 1;
+ }
+
+ /*
+ * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
+ * Controller, this must be done after IRQ sources have been handled to
+ * avoid double IRQ generation
+ */
+ if (ack)
+ desc->irq_data.chip->irq_eoi(&desc->irq_data);
+}
+
+/* Create a virtual IRQ */
+static unsigned int grpci2_build_device_irq(unsigned int irq)
+{
+ unsigned int virq = 0, pil;
+
+ pil = 1 << 8;
+ virq = irq_alloc(irq, pil);
+ if (virq == 0)
+ goto out;
+
+ irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
+ "pcilvl");
+ irq_set_chip_data(virq, (void *)irq);
+
+out:
+ return virq;
+}
+
+void grpci2_hw_init(struct grpci2_priv *priv)
+{
+ u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
+ struct grpci2_regs *regs = priv->regs;
+ int i;
+ struct grpci2_barcfg *barcfg = priv->tgtbars;
+
+ /* Reset any earlier setup */
+ if (priv->do_reset) {
+ printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
+ REGSTORE(regs->ctrl, CTRL_RESET);
+ ssleep(1); /* Wait for boards to settle */
+ }
+ REGSTORE(regs->ctrl, 0);
+ REGSTORE(regs->sts_cap, ~0); /* Clear Status */
+ REGSTORE(regs->dma_ctrl, 0);
+ REGSTORE(regs->dma_bdbase, 0);
+
+ /* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
+ REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
+
+ /* set 1:1 mapping between AHB -> PCI memory space, for all Masters
+ * Each AHB master has it's own mapping registers. Max 16 AHB masters.
+ */
+ for (i = 0; i < 16; i++)
+ REGSTORE(regs->ahbmst_map[i], priv->pci_area);
+
+ /* Get the GRPCI2 Host PCI ID */
+ grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+
+ /* Get address to first (always defined) capability structure */
+ grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+
+ /* Enable/Disable Byte twisting */
+ grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+ io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+
+ /* Setup the Host's PCI Target BARs for other peripherals to access,
+ * and do DMA to the host's memory. The target BARs can be sized and
+ * enabled individually.
+ *
+ * User may set custom target BARs, but default is:
+ * The first BARs is used to map kernel low (DMA is part of normal
+ * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
+ * PCI bus, the other BARs are disabled. We assume that the first BAR
+ * is always available.
+ */
+ for (i = 0; i < 6; i++) {
+ if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
+ /* Target BARs must have the proper alignment */
+ ahbadr = barcfg[i].ahbadr;
+ pciadr = barcfg[i].pciadr;
+ bar_sz = ((pciadr - 1) & ~pciadr) + 1;
+ } else {
+ if (i == 0) {
+ /* Map main memory */
+ bar_sz = 0xf0000008; /* 256MB prefetchable */
+ ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
+ (unsigned long) &_end));
+ pciadr = ahbadr;
+ } else {
+ bar_sz = 0;
+ ahbadr = 0;
+ pciadr = 0;
+ }
+ }
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
+ grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+ printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
+ i, pciadr, ahbadr);
+ }
+
+ /* set as bus master and enable pci memory responses */
+ grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+
+ /* Enable Error respone (CPU-TRAP) on illegal memory access. */
+ REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
+}
+
+static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
+{
+ printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
+ return IRQ_NONE;
+}
+
+/* Handle GRPCI2 Error Interrupt */
+static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
+{
+ struct grpci2_priv *priv = arg;
+ struct grpci2_regs *regs = priv->regs;
+ unsigned int status;
+
+ status = REGLOAD(regs->sts_cap);
+ if ((status & STS_ERR_IRQ) == 0)
+ return IRQ_NONE;
+
+ if (status & STS_IPARERR)
+ printk(KERN_ERR "GRPCI2: Parity Error\n");
+
+ if (status & STS_ITGTABRT)
+ printk(KERN_ERR "GRPCI2: Target Abort\n");
+
+ if (status & STS_IMSTABRT)
+ printk(KERN_ERR "GRPCI2: Master Abort\n");
+
+ if (status & STS_ISYSERR)
+ printk(KERN_ERR "GRPCI2: System Error\n");
+
+ /* Clear handled INT TYPE IRQs */
+ REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit grpci2_of_probe(struct platform_device *ofdev)
+{
+ struct grpci2_regs *regs;
+ struct grpci2_priv *priv;
+ int err, i, len;
+ const int *tmp;
+ unsigned int capability;
+
+ if (grpci2priv) {
+ printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
+ return -ENODEV;
+ }
+
+ if (ofdev->num_resources < 3) {
+ printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
+ return -EIO;
+ }
+
+ /* Find Device Address */
+ regs = of_ioremap(&ofdev->resource[0], 0,
+ resource_size(&ofdev->resource[0]),
+ "grlib-grpci2 regs");
+ if (regs == NULL) {
+ printk(KERN_ERR "GRPCI2: ioremap failed\n");
+ return -EIO;
+ }
+
+ /*
+ * Check that we're in Host Slot and that we can act as a Host Bridge
+ * and not only as target.
+ */
+ capability = REGLOAD(regs->sts_cap);
+ if ((capability & STS_HOST) || !(capability & STS_MST)) {
+ printk(KERN_INFO "GRPCI2: not in host system slot\n");
+ err = -EIO;
+ goto err1;
+ }
+
+ priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
+ if (grpci2priv == NULL) {
+ err = -ENOMEM;
+ goto err1;
+ }
+ memset(grpci2priv, 0, sizeof(*grpci2priv));
+ priv->regs = regs;
+ priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
+ priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
+
+ printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
+
+ /* Byte twisting should be made configurable from kernel command line */
+ priv->bt_enabled = 1;
+
+ /* Let user do custom Target BAR assignment */
+ tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
+ if (tmp && (len == 2*4*6))
+ memcpy(priv->tgtbars, tmp, 2*4*6);
+ else
+ memset(priv->tgtbars, -1, 2*4*6);
+
+ /* Limit IRQ unmasking in irq_mode 2 and 3 */
+ tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
+ if (tmp && (len == 4))
+ priv->do_reset = *tmp;
+ else
+ priv->irq_mask = 0xf;
+
+ /* Optional PCI reset. Force PCI reset on startup */
+ tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
+ if (tmp && (len == 4))
+ priv->do_reset = *tmp;
+ else
+ priv->do_reset = 0;
+
+ /* Find PCI Memory, I/O and Configuration Space Windows */
+ priv->pci_area = ofdev->resource[1].start;
+ priv->pci_area_end = ofdev->resource[1].end+1;
+ priv->pci_io = ofdev->resource[2].start;
+ priv->pci_conf = ofdev->resource[2].start + 0x10000;
+ priv->pci_conf_end = priv->pci_conf + 0x10000;
+ priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
+ if (!priv->pci_io_va) {
+ err = -EIO;
+ goto err2;
+ }
+
+ printk(KERN_INFO
+ "GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
+ " I/O SPACE [0x%08lx - 0x%08lx]\n"
+ " CONFIG SPACE [0x%08lx - 0x%08lx]\n",
+ priv->pci_area, priv->pci_area_end-1,
+ priv->pci_io, priv->pci_conf-1,
+ priv->pci_conf, priv->pci_conf_end-1);
+
+ /*
+ * I/O Space resources in I/O Window mapped into Virtual Adr Space
+ * We never use low 4KB because some devices seem have problems using
+ * address 0.
+ */
+ memset(&priv->info.io_space, 0, sizeof(struct resource));
+ priv->info.io_space.name = "GRPCI2 PCI I/O Space";
+ priv->info.io_space.start = priv->pci_io_va + 0x1000;
+ priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
+ priv->info.io_space.flags = IORESOURCE_IO;
+
+ /*
+ * GRPCI2 has no prefetchable memory, map everything as
+ * non-prefetchable memory
+ */
+ memset(&priv->info.mem_space, 0, sizeof(struct resource));
+ priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
+ priv->info.mem_space.start = priv->pci_area;
+ priv->info.mem_space.end = priv->pci_area_end - 1;
+ priv->info.mem_space.flags = IORESOURCE_MEM;
+
+ if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
+ goto err3;
+ if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
+ goto err4;
+
+ grpci2_hw_init(priv);
+
+ /*
+ * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
+ * Error IRQ always on PCI INTA.
+ */
+ if (priv->irq_mode < 2) {
+ /* All PCI interrupts are shared using the same system IRQ */
+ leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
+ "pcilvl", 0);
+
+ priv->irq_map[0] = grpci2_build_device_irq(1);
+ priv->irq_map[1] = grpci2_build_device_irq(2);
+ priv->irq_map[2] = grpci2_build_device_irq(3);
+ priv->irq_map[3] = grpci2_build_device_irq(4);
+
+ priv->virq_err = grpci2_build_device_irq(5);
+ if (priv->irq_mode & 1)
+ priv->virq_dma = ofdev->archdata.irqs[1];
+ else
+ priv->virq_dma = grpci2_build_device_irq(6);
+
+ /* Enable IRQs on LEON IRQ controller */
+ err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
+ "GRPCI2_JUMP", priv);
+ if (err)
+ printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
+ } else {
+ /* All PCI interrupts have an unique IRQ interrupt */
+ for (i = 0; i < 4; i++) {
+ /* Make LEON IRQ layer handle level IRQ by acking */
+ leon_update_virq_handling(ofdev->archdata.irqs[i],
+ handle_fasteoi_irq, "pcilvl",
+ 1);
+ priv->irq_map[i] = ofdev->archdata.irqs[i];
+ }
+ priv->virq_err = priv->irq_map[0];
+ if (priv->irq_mode & 1)
+ priv->virq_dma = ofdev->archdata.irqs[4];
+ else
+ priv->virq_dma = priv->irq_map[0];
+
+ /* Unmask all PCI interrupts, request_irq will not do that */
+ REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
+ }
+
+ /* Setup IRQ handler for non-configuration space access errors */
+ err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
+ "GRPCI2_ERR", priv);
+ if (err) {
+ printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
+ goto err5;
+ }
+
+ /*
+ * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
+ * is called by the PCI Device drivers
+ */
+ REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
+
+ /* Init common layer and scan buses */
+ priv->info.ops = &grpci2_ops;
+ priv->info.map_irq = grpci2_map_irq;
+ leon_pci_init(ofdev, &priv->info);
+
+ return 0;
+
+err5:
+ release_resource(&priv->info.io_space);
+err4:
+ release_resource(&priv->info.mem_space);
+err3:
+ err = -ENOMEM;
+ iounmap((void *)priv->pci_io_va);
+err2:
+ kfree(priv);
+err1:
+ of_iounmap(&ofdev->resource[0], regs,
+ resource_size(&ofdev->resource[0]));
+ return err;
+}
+
+static struct of_device_id grpci2_of_match[] = {
+ {
+ .name = "GAISLER_GRPCI2",
+ },
+ {
+ .name = "01_07c",
+ },
+ {},
+};
+
+static struct platform_driver grpci2_of_driver = {
+ .driver = {
+ .name = "grpci2",
+ .owner = THIS_MODULE,
+ .of_match_table = grpci2_of_match,
+ },
+ .probe = grpci2_of_probe,
+};
+
+static int __init grpci2_init(void)
+{
+ return platform_driver_register(&grpci2_of_driver);
+}
+
+subsys_initcall(grpci2_init);
me->name,
(int) (ELF_R_TYPE(rel[i].r_info) & 0xff));
return -ENOEXEC;
- };
+ }
}
return 0;
}
case 4:
*value = ret & 0xffffffff;
break;
- };
+ }
return PCIBIOS_SUCCESSFUL;
default:
break;
- };
+ }
}
if (!saw_io || !saw_mem) {
default:
type_string = "ECC Error";
break;
- };
+ }
printk("%s: IOMMU Error, type[%s]\n",
pbm->name, type_string);
default:
type_string = "ECC Error";
break;
- };
+ }
printk("%s: IOMMU TAG(%d)[error(%s) ctx(%x) wr(%d) str(%d) "
"sz(%dK) vpg(%08lx)]\n",
pbm->name, i, type_string,
default:
chipset_name = "SCHIZO";
break;
- };
+ }
/* For SCHIZO, three OBP regs:
* 1) PBM controller regs
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
- };
+ }
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}
default:
type_str = "ECC Error";
break;
- };
+ }
printk(KERN_ERR "%s: IOMMU Error, type[%s]\n",
pbm->name, type_str);
default:
return;
- };
+ }
val = upa_readq(cfg_reg);
if (val & (1UL << 14UL)) {
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
- };
+ }
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}
default:
printk("UNKNOWN!\n");
break;
- };
+ }
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
default:
prom_printf("Unknown cpu type, halting.\n");
prom_halt();
- };
+ }
*(unsigned int *) (addr + 0) = insns[0];
wmb();
printk("UNKNOWN!\n");
BUG();
break;
- };
+ }
}
void cpu_panic(void)
printk("UNKNOWN!\n");
BUG();
break;
- };
+ }
}
/* Set this up early so that things like the scheduler can init
printk("UNKNOWN!\n");
BUG();
break;
- };
+ }
if (!ret) {
cpumask_set_cpu(cpu, &smp_commenced_mask);
sbil = (sbusl << 2);
/* Loop for each pending SBI */
- for (sbino = 0; bus_mask; sbino++) {
+ for (sbino = 0; bus_mask; sbino++, bus_mask >>= 1) {
unsigned int idx, mask;
- bus_mask >>= 1;
if (!(bus_mask & 1))
continue;
/* XXX This seems to ACK the irq twice. acquire_sbi()
mask &= (0xf << sbil);
/* Loop for each pending SBI slot */
- idx = 0;
slot = (1 << sbil);
- while (mask != 0) {
+ for (idx = 0; mask != 0; idx++, slot <<= 1) {
unsigned int pil;
struct irq_bucket *p;
- idx++;
- slot <<= 1;
if (!(mask & slot))
continue;
mask &= ~slot;
- pil = sun4d_encode_irq(sbino, sbil, idx);
+ pil = sun4d_encode_irq(sbino, sbusl, idx);
p = irq_map[pil];
while (p) {
#ifdef CONFIG_SMP
spin_lock_irqsave(&sun4d_imsk_lock, flags);
- cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) | ~(1 << real_irq));
+ cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) & ~(1 << real_irq));
spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
#else
- cc_set_imsk(cc_get_imsk() | ~(1 << real_irq));
+ cc_set_imsk(cc_get_imsk() & ~(1 << real_irq));
#endif
}
}
}
+unsigned int _sun4d_build_device_irq(unsigned int real_irq,
+ unsigned int pil,
+ unsigned int board)
+{
+ struct sun4d_handler_data *handler_data;
+ unsigned int irq;
+
+ irq = irq_alloc(real_irq, pil);
+ if (irq == 0) {
+ prom_printf("IRQ: allocate for %d %d %d failed\n",
+ real_irq, pil, board);
+ goto err_out;
+ }
+
+ handler_data = irq_get_handler_data(irq);
+ if (unlikely(handler_data))
+ goto err_out;
+
+ handler_data = kzalloc(sizeof(struct sun4d_handler_data), GFP_ATOMIC);
+ if (unlikely(!handler_data)) {
+ prom_printf("IRQ: kzalloc(sun4d_handler_data) failed.\n");
+ prom_halt();
+ }
+ handler_data->cpuid = board_to_cpu[board];
+ handler_data->real_irq = real_irq;
+ irq_set_chip_and_handler_name(irq, &sun4d_irq,
+ handle_level_irq, "level");
+ irq_set_handler_data(irq, handler_data);
+
+err_out:
+ return irq;
+}
+
+
+
unsigned int sun4d_build_device_irq(struct platform_device *op,
unsigned int real_irq)
{
struct device_node *dp = op->dev.of_node;
- struct device_node *io_unit, *sbi = dp->parent;
+ struct device_node *board_parent, *bus = dp->parent;
+ char *bus_connection;
const struct linux_prom_registers *regs;
- struct sun4d_handler_data *handler_data;
unsigned int pil;
unsigned int irq;
int board, slot;
int sbusl;
- irq = 0;
- while (sbi) {
- if (!strcmp(sbi->name, "sbi"))
+ irq = real_irq;
+ while (bus) {
+ if (!strcmp(bus->name, "sbi")) {
+ bus_connection = "io-unit";
+ break;
+ }
+
+ if (!strcmp(bus->name, "bootbus")) {
+ bus_connection = "cpu-unit";
break;
+ }
- sbi = sbi->parent;
+ bus = bus->parent;
}
- if (!sbi)
+ if (!bus)
goto err_out;
regs = of_get_property(dp, "reg", NULL);
slot = regs->which_io;
/*
- * If SBI's parent is not io-unit or the io-unit lacks
- * a "board#" property, something is very wrong.
+ * If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit
+ * lacks a "board#" property, something is very wrong.
*/
- if (!sbi->parent || strcmp(sbi->parent->name, "io-unit")) {
- printk("%s: Error, parent is not io-unit.\n", sbi->full_name);
+ if (!bus->parent || strcmp(bus->parent->name, bus_connection)) {
+ printk(KERN_ERR "%s: Error, parent is not %s.\n",
+ bus->full_name, bus_connection);
goto err_out;
}
- io_unit = sbi->parent;
- board = of_getintprop_default(io_unit, "board#", -1);
+ board_parent = bus->parent;
+ board = of_getintprop_default(board_parent, "board#", -1);
if (board == -1) {
- printk("%s: Error, lacks board# property.\n", io_unit->full_name);
+ printk(KERN_ERR "%s: Error, lacks board# property.\n",
+ board_parent->full_name);
goto err_out;
}
else
pil = real_irq;
- irq = irq_alloc(real_irq, pil);
- if (irq == 0)
- goto err_out;
-
- handler_data = irq_get_handler_data(irq);
- if (unlikely(handler_data))
- goto err_out;
-
- handler_data = kzalloc(sizeof(struct sun4d_handler_data), GFP_ATOMIC);
- if (unlikely(!handler_data)) {
- prom_printf("IRQ: kzalloc(sun4d_handler_data) failed.\n");
- prom_halt();
- }
- handler_data->cpuid = board_to_cpu[board];
- handler_data->real_irq = real_irq;
- irq_set_chip_and_handler_name(irq, &sun4d_irq,
- handle_level_irq, "level");
- irq_set_handler_data(irq, handler_data);
-
+ irq = _sun4d_build_device_irq(real_irq, pil, board);
err_out:
- return real_irq;
+ return irq;
}
+unsigned int sun4d_build_timer_irq(unsigned int board, unsigned int real_irq)
+{
+ return _sun4d_build_device_irq(real_irq, real_irq, board);
+}
+
+
static void __init sun4d_fixup_trap_table(void)
{
#ifdef CONFIG_SMP
unsigned int irq;
const u32 *reg;
int err;
+ int board;
dp = of_find_node_by_name(NULL, "cpu-unit");
if (!dp) {
* bootbus.
*/
reg = of_get_property(dp, "reg", NULL);
- of_node_put(dp);
if (!reg) {
prom_printf("sun4d_init_timers: No reg property\n");
prom_halt();
}
+ board = of_getintprop_default(dp, "board#", -1);
+ if (board == -1) {
+ prom_printf("sun4d_init_timers: No board# property on cpu-unit\n");
+ prom_halt();
+ }
+
+ of_node_put(dp);
+
res.start = reg[1];
res.end = reg[2] - 1;
res.flags = reg[0] & 0xff;
master_l10_counter = &sun4d_timers->l10_cur_count;
- irq = sun4d_build_device_irq(NULL, SUN4D_TIMER_IRQ);
+ irq = sun4d_build_timer_irq(board, SUN4D_TIMER_IRQ);
err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
if (err) {
prom_printf("sun4d_init_timers: request_irq() failed with %d\n",
default:
return -ENOSYS;
- };
+ }
return -ENOSYS;
}
default:
err = -ENOSYS;
goto out;
- };
+ }
}
if (call <= MSGCTL) {
switch (call) {
default:
err = -ENOSYS;
goto out;
- };
+ }
}
if (call <= SHMCTL) {
switch (call) {
default:
err = -ENOSYS;
goto out;
- };
+ }
} else {
err = -ENOSYS;
}
case CLOCK_EVT_MODE_UNUSED:
WARN_ON(1);
break;
- };
+ }
}
static struct clock_event_device sparc64_clockevent = {
return "warning resumable";
default:
return "unknown";
- };
+ }
}
static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent, int cpu, const char *pfx, atomic_t *ocnt)
default:
BUG();
break;
- };
+ }
}
return __do_int_store(dst_addr, size, src_val, asi);
}
case ASI_SNFL:
asi &= ~0x08;
break;
- };
+ }
switch (dir) {
case load:
reg_addr = fetch_reg_addr(((insn>>25)&0x1f), regs);
default:
BUG();
break;
- };
+ }
*reg_addr = val_in;
}
break;
default:
BUG();
- };
+ }
}
static unsigned long index_to_divisor(unsigned int index)
default:
BUG();
- };
+ }
}
static unsigned long estar_to_divisor(unsigned long estar)
break;
default:
BUG();
- };
+ }
return ret;
}
break;
default:
BUG();
- };
+ }
return ret;
}
default:
BUG();
- };
+ }
reg = read_safari_cfg();
default:
return handshake_failure(vio);
- };
+ }
}
static int process_attr(struct vio_driver_state *vio, void *pkt)
left = edge32_tab_l[(rs1 >> 2) & 0x1].left;
right = edge32_tab_l[(rs2 >> 2) & 0x1].right;
break;
- };
+ }
if ((rs1 & ~0x7UL) == (rs2 & ~0x7UL))
rd_val = right & left;
tstate = regs->tstate & ~(TSTATE_XCC | TSTATE_ICC);
regs->tstate = tstate | (ccr << 32UL);
}
- };
+ }
}
static void array(struct pt_regs *regs, unsigned int insn, unsigned int opf)
case ARRAY32_OPF:
rd_val <<= 2;
- };
+ }
store_reg(regs, rd_val, RD(insn));
}
*fpd_regaddr(f, RD(insn)) = rd_val;
break;
}
- };
+ }
}
static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf)
*fpd_regaddr(f, RD(insn)) = rd_val;
break;
}
- };
+ }
}
static void pcmp(struct pt_regs *regs, unsigned int insn, unsigned int opf)
rd_val |= 1 << i;
}
break;
- };
+ }
maybe_flush_windows(0, 0, RD(insn), 0);
store_reg(regs, rd_val, RD(insn));
case BSHUFFLE_OPF:
bshuffle(regs, insn);
break;
- };
+ }
regs->tpc = regs->tnpc;
regs->tnpc += 4;
default:
break;
- };
+ }
memset(®s, 0, sizeof (regs));
regs.pc = pc;
prom_printf("paging_init: sparc_cpu_model = %d\n", sparc_cpu_model);
prom_printf("paging_init: Halting...\n");
prom_halt();
- };
+ }
/* Initialize the protection map with non-constant, MMU dependent values. */
protection_map[0] = PAGE_NONE;
ktsb_descr[0].pgsz_idx = HV_PGSZ_IDX_4MB;
ktsb_descr[0].pgsz_mask = HV_PGSZ_MASK_4MB;
break;
- };
+ }
ktsb_descr[0].assoc = 1;
ktsb_descr[0].num_ttes = KERNEL_TSB_NENTRIES;
return _PAGE_SZ512K_4V;
case 4 * 1024 * 1024:
return _PAGE_SZ4MB_4V;
- };
+ }
} else {
switch (sz) {
case 8 * 1024:
return _PAGE_SZ512K_4U;
case 4 * 1024 * 1024:
return _PAGE_SZ4MB_4U;
- };
+ }
}
}
default:
srmmu_modtype = Swift_ok;
break;
- };
+ }
BTFIXUPSET_CALL(flush_cache_all, swift_flush_cache_all, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(flush_cache_mm, swift_flush_cache_mm, BTFIXUPCALL_NORM);
/* Some other Cypress revision, assume a 605. */
init_cypress_605(mod_rev);
break;
- };
+ }
return;
}
prom_printf("probe_vac: Didn't expect vac-linesize of %d, halting\n",
sun4c_vacinfo.linesize);
prom_halt();
- };
+ }
sun4c_flush_all();
sun4c_enable_vac();
prom_printf("Unhandled number of segmaps: %d\n",
num_segmaps);
prom_halt();
- };
+ }
switch (num_contexts) {
case 8:
/* Default, nothing to do. */
prom_printf("Unhandled number of contexts: %d\n",
num_contexts);
prom_halt();
- };
+ }
if (sun4c_vacinfo.do_hwflushes != 0) {
PATCH_INSN(vac_hwflush_patch1_on, vac_hwflush_patch1);
prom_printf("Impossible VAC linesize %d, halting...\n",
sun4c_vacinfo.linesize);
prom_halt();
- };
+ }
}
}
printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n",
current->comm, current->pid, tsb_bytes);
do_exit(SIGSEGV);
- };
+ }
tte |= pte_sz_bits(page_sz);
if (tlb_type == cheetah_plus || tlb_type == hypervisor) {
#endif
default:
BUG();
- };
+ }
hp->assoc = 1;
hp->num_ttes = tsb_bytes / 16;
hp->ctx_idx = 0;
#endif
default:
BUG();
- };
+ }
hp->tsb_base = tsb_paddr;
hp->resv = 0;
}
break;
default:
break;
- };
+ }
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
return i; /* Ugh, we could spin forever on unsupported proms ;( */
romvec->pv_romvers);
prom_halt();
break;
- };
+ }
prom_rev = romvec->pv_plugin_revision;
prom_prev = romvec->pv_printrev;
case PROM_V3:
ret = (*(romvec->v3_cpustart))(cpunode, (int) ctable_reg, ctx, pc);
break;
- };
+ }
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
help
Enable support for NB0916 PWM controllers
-config PUV3_RTC
- tristate "PKUnity v3 RTC Support"
- depends on !ARCH_FPGA
-
if PUV3_NB0916
menu "PKUnity NetBook-0916 Features"
libs-y += arch/unicore32/lib/
-ASM_GENERATED_DIR := $(srctree)/arch/unicore32/include/generated
-LINUXINCLUDE += -I$(ASM_GENERATED_DIR)
-
-ASM_GENERIC_HEADERS := atomic.h auxvec.h
-ASM_GENERIC_HEADERS += bitsperlong.h bug.h bugs.h
-ASM_GENERIC_HEADERS += cputime.h current.h
-ASM_GENERIC_HEADERS += device.h div64.h
-ASM_GENERIC_HEADERS += emergency-restart.h errno.h
-ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h futex.h
-ASM_GENERIC_HEADERS += hardirq.h hw_irq.h
-ASM_GENERIC_HEADERS += ioctl.h ioctls.h ipcbuf.h irq_regs.h
-ASM_GENERIC_HEADERS += kdebug.h kmap_types.h
-ASM_GENERIC_HEADERS += local.h
-ASM_GENERIC_HEADERS += mman.h module.h msgbuf.h
-ASM_GENERIC_HEADERS += param.h parport.h percpu.h poll.h posix_types.h
-ASM_GENERIC_HEADERS += resource.h
-ASM_GENERIC_HEADERS += scatterlist.h sections.h segment.h sembuf.h serial.h
-ASM_GENERIC_HEADERS += setup.h shmbuf.h shmparam.h
-ASM_GENERIC_HEADERS += siginfo.h signal.h sizes.h
-ASM_GENERIC_HEADERS += socket.h sockios.h stat.h statfs.h swab.h syscalls.h
-ASM_GENERIC_HEADERS += termbits.h termios.h topology.h types.h
-ASM_GENERIC_HEADERS += ucontext.h unaligned.h user.h
-ASM_GENERIC_HEADERS += vga.h
-ASM_GENERIC_HEADERS += xor.h
-
-archprepare:
-ifneq ($(ASM_GENERATED_DIR), $(wildcard $(ASM_GENERATED_DIR)))
- $(Q)mkdir -p $(ASM_GENERATED_DIR)/asm
- $(Q)$(foreach a, $(ASM_GENERIC_HEADERS), \
- echo '#include <asm-generic/$a>' \
- > $(ASM_GENERATED_DIR)/asm/$a; )
-endif
-
boot := arch/unicore32/boot
-# Default target when executing plain make
+# Default defconfig and target when executing plain make
+KBUILD_DEFCONFIG := $(ARCH)_defconfig
KBUILD_IMAGE := zImage
all: $(KBUILD_IMAGE)
zImage Image uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-MRPROPER_DIRS += $(ASM_GENERATED_DIR)
-
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
# We now have a PIC decompressor implementation. Decompressors running
# from RAM should not define ZTEXTADDR. Decompressors running directly
# from ROM or Flash must define ZTEXTADDR (preferably via the config)
-ZTEXTADDR := 0
+ZTEXTADDR := 0x03000000
ZBSSADDR := ALIGN(4)
SEDFLAGS_lds = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
### General setup
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-debug"
+CONFIG_LOCALVERSION="-unicore32"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_I2C_EEPROM_AT24=n
CONFIG_LCD_BACKLIGHT=n
-CONFIG_PUV3_RTC=y
CONFIG_PUV3_UMAL=y
CONFIG_PUV3_MUSB=n
CONFIG_PUV3_AC97=n
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# Real Time Clock
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PUV3=y
### File systems
CONFIG_EXT2_FS=m
include include/asm-generic/Kbuild.asm
+generic-y += atomic.h
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += syscalls.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += types.h
+generic-y += ucontext.h
+generic-y += unaligned.h
+generic-y += user.h
+generic-y += vga.h
+generic-y += xor.h
obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o
obj-$(CONFIG_PUV3_GPIO) += gpio.o
-obj-$(CONFIG_PUV3_RTC) += rtc.o
obj-$(CONFIG_PUV3_PWM) += pwm.o
obj-$(CONFIG_PUV3_PM) += pm.o sleep.o
obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o
HEAD_TEXT_SECTION
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
- PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
+ PERCPU_SECTION(L1_CACHE_BYTES)
__init_end = .;
_stext = .;
#define ARCH_DISCARD_MEMBLOCK
u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align);
-void memblock_x86_to_bootmem(u64 start, u64 end);
void memblock_x86_reserve_range(u64 start, u64 end, char *name);
void memblock_x86_free_range(u64 start, u64 end);
u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align);
u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
+bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align);
#endif
u64 product;
#ifdef __i386__
u32 tmp1, tmp2;
+#else
+ ulong tmp;
#endif
if (shift < 0)
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
#elif defined(__x86_64__)
__asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+ "mul %[mul_frac] ; shrd $32, %[hi], %[lo]"
+ : [lo]"=a"(product),
+ [hi]"=d"(tmp)
+ : "0"(delta),
+ [mul_frac]"rm"((u64)mul_frac));
#else
#error implement me!
#endif
#include <asm/proto.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/dma.h>
#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu_types.h>
#include <asm/amd_iommu.h>
pdev = pci_get_bus_and_slot(PCI_BUS(alias), alias & 0xff);
if (pdev)
dev_data->alias = &pdev->dev;
+ else {
+ kfree(dev_data);
+ return -ENOTSUPP;
+ }
atomic_set(&dev_data->bind, 0);
return 0;
}
+static void iommu_ignore_device(struct device *dev)
+{
+ u16 devid, alias;
+
+ devid = get_device_id(dev);
+ alias = amd_iommu_alias_table[devid];
+
+ memset(&amd_iommu_dev_table[devid], 0, sizeof(struct dev_table_entry));
+ memset(&amd_iommu_dev_table[alias], 0, sizeof(struct dev_table_entry));
+
+ amd_iommu_rlookup_table[devid] = NULL;
+ amd_iommu_rlookup_table[alias] = NULL;
+}
+
static void iommu_uninit_device(struct device *dev)
{
kfree(dev->archdata.iommu);
continue;
ret = iommu_init_device(&pdev->dev);
- if (ret)
+ if (ret == -ENOTSUPP)
+ iommu_ignore_device(&pdev->dev);
+ else if (ret)
goto out_free;
}
.dma_supported = amd_iommu_dma_supported,
};
+static unsigned device_dma_ops_init(void)
+{
+ struct pci_dev *pdev = NULL;
+ unsigned unhandled = 0;
+
+ for_each_pci_dev(pdev) {
+ if (!check_device(&pdev->dev)) {
+ unhandled += 1;
+ continue;
+ }
+
+ pdev->dev.archdata.dma_ops = &amd_iommu_dma_ops;
+ }
+
+ return unhandled;
+}
+
/*
* The function which clues the AMD IOMMU driver into dma_ops.
*/
int __init amd_iommu_init_dma_ops(void)
{
struct amd_iommu *iommu;
- int ret;
+ int ret, unhandled;
/*
* first allocate a default protection domain for every IOMMU we
swiotlb = 0;
/* Make the driver finally visible to the drivers */
- dma_ops = &amd_iommu_dma_ops;
+ unhandled = device_dma_ops_init();
+ if (unhandled && max_pfn > MAX_DMA32_PFN) {
+ /* There are unhandled devices - initialize swiotlb for them */
+ swiotlb = 1;
+ }
amd_iommu_stats_init();
{
u8 *p = (u8 *)h;
u8 *end = p, flags = 0;
- u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
- u32 ext_flags = 0;
+ u16 devid = 0, devid_start = 0, devid_to = 0;
+ u32 dev_i, ext_flags = 0;
bool alias = false;
struct ivhd_entry *e;
/* Initializes the device->iommu mapping for the driver */
static int __init init_iommu_devices(struct amd_iommu *iommu)
{
- u16 i;
+ u32 i;
for (i = iommu->first_device; i <= iommu->last_device; ++i)
set_iommu_for_device(iommu, i);
*/
static void init_device_table(void)
{
- u16 devid;
+ u32 devid;
for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
set_dev_entry_bit(devid, DEV_ENTRY_VALID);
/*
* If mask=1, the LVT entry does not generate interrupts while mask=0
- * enables the vector. See also the BKDGs.
+ * enables the vector. See also the BKDGs. Must be called with
+ * preemption disabled.
*/
int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask)
/* Direct Legacy VGA I/O traffic to designated IOH */
int uv_set_vga_state(struct pci_dev *pdev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
int domain, bus, rc;
- PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
- pdev->devfn, decode, command_bits, change_bridge);
+ PR_DEVEL("devfn %x decode %d cmd %x flags %d\n",
+ pdev->devfn, decode, command_bits, flags);
- if (!change_bridge)
+ if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
return 0;
if ((command_bits & PCI_COMMAND_IO) == 0)
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of_pci.h>
+#include <linux/initrd.h>
#include <asm/hpet.h>
#include <asm/irq_controller.h>
return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
}
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
+}
+#endif
+
void __init add_dtb(u64 data)
{
initial_dtb = data + offsetof(struct setup_data, data);
* Powermanagement idle function, if any..
*/
void (*pm_idle)(void);
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(pm_idle);
#endif
cpu_relax();
}
}
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
#endif
{
set_user_gs(regs, 0);
regs->fs = 0;
- set_fs(USER_DS);
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = _cs;
regs->ss = _ss;
regs->flags = X86_EFLAGS_IF;
- set_fs(USER_DS);
/*
* Free the old FP and other extended state
*/
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
x86_platform.nmi_init();
+ /*
+ * Wait until the cpu which brought this one up marked it
+ * online before enabling interrupts. If we don't do that then
+ * we can end up waking up the softirq thread before this cpu
+ * reached the active state, which makes the scheduler unhappy
+ * and schedule the softirq thread on the wrong cpu. This is
+ * only observable with forced threaded interrupts, but in
+ * theory it could also happen w/o them. It's just way harder
+ * to achieve.
+ */
+ while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
+ cpu_relax();
+
/* enable local interrupts */
local_irq_enable();
#define DstDI (5<<1) /* Destination is in ES:(E)DI */
#define DstMem64 (6<<1) /* 64bit memory operand */
#define DstImmUByte (7<<1) /* 8-bit unsigned immediate operand */
-#define DstMask (7<<1)
+#define DstDX (8<<1) /* Destination is in DX register */
+#define DstMask (0xf<<1)
/* Source operand type. */
-#define SrcNone (0<<4) /* No source operand. */
-#define SrcReg (1<<4) /* Register operand. */
-#define SrcMem (2<<4) /* Memory operand. */
-#define SrcMem16 (3<<4) /* Memory operand (16-bit). */
-#define SrcMem32 (4<<4) /* Memory operand (32-bit). */
-#define SrcImm (5<<4) /* Immediate operand. */
-#define SrcImmByte (6<<4) /* 8-bit sign-extended immediate operand. */
-#define SrcOne (7<<4) /* Implied '1' */
-#define SrcImmUByte (8<<4) /* 8-bit unsigned immediate operand. */
-#define SrcImmU (9<<4) /* Immediate operand, unsigned */
-#define SrcSI (0xa<<4) /* Source is in the DS:RSI */
-#define SrcImmFAddr (0xb<<4) /* Source is immediate far address */
-#define SrcMemFAddr (0xc<<4) /* Source is far address in memory */
-#define SrcAcc (0xd<<4) /* Source Accumulator */
-#define SrcImmU16 (0xe<<4) /* Immediate operand, unsigned, 16 bits */
-#define SrcMask (0xf<<4)
+#define SrcNone (0<<5) /* No source operand. */
+#define SrcReg (1<<5) /* Register operand. */
+#define SrcMem (2<<5) /* Memory operand. */
+#define SrcMem16 (3<<5) /* Memory operand (16-bit). */
+#define SrcMem32 (4<<5) /* Memory operand (32-bit). */
+#define SrcImm (5<<5) /* Immediate operand. */
+#define SrcImmByte (6<<5) /* 8-bit sign-extended immediate operand. */
+#define SrcOne (7<<5) /* Implied '1' */
+#define SrcImmUByte (8<<5) /* 8-bit unsigned immediate operand. */
+#define SrcImmU (9<<5) /* Immediate operand, unsigned */
+#define SrcSI (0xa<<5) /* Source is in the DS:RSI */
+#define SrcImmFAddr (0xb<<5) /* Source is immediate far address */
+#define SrcMemFAddr (0xc<<5) /* Source is far address in memory */
+#define SrcAcc (0xd<<5) /* Source Accumulator */
+#define SrcImmU16 (0xe<<5) /* Immediate operand, unsigned, 16 bits */
+#define SrcDX (0xf<<5) /* Source is in DX register */
+#define SrcMask (0xf<<5)
/* Generic ModRM decode. */
-#define ModRM (1<<8)
+#define ModRM (1<<9)
/* Destination is only written; never read. */
-#define Mov (1<<9)
-#define BitOp (1<<10)
-#define MemAbs (1<<11) /* Memory operand is absolute displacement */
-#define String (1<<12) /* String instruction (rep capable) */
-#define Stack (1<<13) /* Stack instruction (push/pop) */
-#define GroupMask (7<<14) /* Opcode uses one of the group mechanisms */
-#define Group (1<<14) /* Bits 3:5 of modrm byte extend opcode */
-#define GroupDual (2<<14) /* Alternate decoding of mod == 3 */
-#define Prefix (3<<14) /* Instruction varies with 66/f2/f3 prefix */
-#define RMExt (4<<14) /* Opcode extension in ModRM r/m if mod == 3 */
-#define Sse (1<<17) /* SSE Vector instruction */
+#define Mov (1<<10)
+#define BitOp (1<<11)
+#define MemAbs (1<<12) /* Memory operand is absolute displacement */
+#define String (1<<13) /* String instruction (rep capable) */
+#define Stack (1<<14) /* Stack instruction (push/pop) */
+#define GroupMask (7<<15) /* Opcode uses one of the group mechanisms */
+#define Group (1<<15) /* Bits 3:5 of modrm byte extend opcode */
+#define GroupDual (2<<15) /* Alternate decoding of mod == 3 */
+#define Prefix (3<<15) /* Instruction varies with 66/f2/f3 prefix */
+#define RMExt (4<<15) /* Opcode extension in ModRM r/m if mod == 3 */
+#define Sse (1<<18) /* SSE Vector instruction */
/* Misc flags */
#define Prot (1<<21) /* instruction generates #UD if not in prot-mode */
#define VendorSpecific (1<<22) /* Vendor specific instruction */
I(DstReg | SrcMem | ModRM | Src2Imm, em_imul_3op),
I(SrcImmByte | Mov | Stack, em_push),
I(DstReg | SrcMem | ModRM | Src2ImmByte, em_imul_3op),
- D2bvIP(DstDI | Mov | String, ins, check_perm_in), /* insb, insw/insd */
- D2bvIP(SrcSI | ImplicitOps | String, outs, check_perm_out), /* outsb, outsw/outsd */
+ D2bvIP(DstDI | SrcDX | Mov | String, ins, check_perm_in), /* insb, insw/insd */
+ D2bvIP(SrcSI | DstDX | String, outs, check_perm_out), /* outsb, outsw/outsd */
/* 0x70 - 0x7F */
X16(D(SrcImmByte)),
/* 0x80 - 0x87 */
/* 0xE8 - 0xEF */
D(SrcImm | Stack), D(SrcImm | ImplicitOps),
D(SrcImmFAddr | No64), D(SrcImmByte | ImplicitOps),
- D2bvIP(SrcNone | DstAcc, in, check_perm_in),
- D2bvIP(SrcAcc | ImplicitOps, out, check_perm_out),
+ D2bvIP(SrcDX | DstAcc, in, check_perm_in),
+ D2bvIP(SrcAcc | DstDX, out, check_perm_out),
/* 0xF0 - 0xF7 */
N, DI(ImplicitOps, icebp), N, N,
DI(ImplicitOps | Priv, hlt), D(ImplicitOps),
memop.bytes = c->op_bytes + 2;
goto srcmem_common;
break;
+ case SrcDX:
+ c->src.type = OP_REG;
+ c->src.bytes = 2;
+ c->src.addr.reg = &c->regs[VCPU_REGS_RDX];
+ fetch_register_operand(&c->src);
+ break;
}
if (rc != X86EMUL_CONTINUE)
c->dst.addr.mem.seg = VCPU_SREG_ES;
c->dst.val = 0;
break;
+ case DstDX:
+ c->dst.type = OP_REG;
+ c->dst.bytes = 2;
+ c->dst.addr.reg = &c->regs[VCPU_REGS_RDX];
+ fetch_register_operand(&c->dst);
+ break;
case ImplicitOps:
/* Special instructions do their own operand decoding. */
default:
break;
case 0xec: /* in al,dx */
case 0xed: /* in (e/r)ax,dx */
- c->src.val = c->regs[VCPU_REGS_RDX];
do_io_in:
if (!pio_in_emulated(ctxt, ops, c->dst.bytes, c->src.val,
&c->dst.val))
break;
case 0xee: /* out dx,al */
case 0xef: /* out dx,(e/r)ax */
- c->dst.val = c->regs[VCPU_REGS_RDX];
do_io_out:
ops->pio_out_emulated(ctxt, c->src.bytes, c->dst.val,
&c->src.val, 1);
static bool mapping_level_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t large_gfn)
{
- return gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true);
+ return !gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true);
}
static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
gva_t addr, u32 access)
{
pt_element_t pte;
- pt_element_t __user *ptep_user;
+ pt_element_t __user *uninitialized_var(ptep_user);
gfn_t table_gfn;
unsigned index, pt_access, uninitialized_var(pte_access);
gpa_t pte_gpa;
unsigned long cr0,
struct kvm_vcpu *vcpu)
{
- vmx_decache_cr3(vcpu);
+ if (!test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail))
+ vmx_decache_cr3(vcpu);
if (!(cr0 & X86_CR0_PG)) {
/* From paging/starting to nonpaging */
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
#include <linux/range.h>
/* Check for already reserved areas */
-static bool __init check_with_memblock_reserved_size(u64 *addrp, u64 *sizep, u64 align)
+bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align)
{
struct memblock_region *r;
u64 addr = *addrp, last;
if (addr >= ei_last)
continue;
*sizep = ei_last - addr;
- while (check_with_memblock_reserved_size(&addr, sizep, align))
+ while (memblock_x86_check_reserved_size(&addr, sizep, align))
;
if (*sizep)
return 0;
}
+/*
+ * This runs only on the current cpu. We try to find an LVT offset and
+ * setup the local APIC. For this we must disable preemption. On
+ * success we initialize all nodes with this offset. This updates then
+ * the offset in the IBS_CTL per-node msr. The per-core APIC setup of
+ * the IBS interrupt vector is called from op_amd_setup_ctrs()/op_-
+ * amd_cpu_shutdown() using the new offset.
+ */
static int force_ibs_eilvt_setup(void)
{
int offset;
int ret;
- /*
- * find the next free available EILVT entry, skip offset 0,
- * pin search to this cpu
- */
preempt_disable();
+ /* find the next free available EILVT entry, skip offset 0 */
for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) {
if (get_eilvt(offset))
break;
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
efi_memory_desc_t *md = p;
- unsigned long long start = md->phys_addr;
- unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
+ u64 start = md->phys_addr;
+ u64 size = md->num_pages << EFI_PAGE_SHIFT;
if (md->type != EFI_BOOT_SERVICES_CODE &&
md->type != EFI_BOOT_SERVICES_DATA)
continue;
-
- memblock_x86_reserve_range(start, start + size, "EFI Boot");
+ /* Only reserve where possible:
+ * - Not within any already allocated areas
+ * - Not over any memory area (really needed, if above?)
+ * - Not within any part of the kernel
+ * - Not the bios reserved area
+ */
+ if ((start+size >= virt_to_phys(_text)
+ && start <= virt_to_phys(_end)) ||
+ !e820_all_mapped(start, start+size, E820_RAM) ||
+ memblock_x86_check_reserved_size(&start, &size,
+ 1<<EFI_PAGE_SHIFT)) {
+ /* Could not reserve, skip it */
+ md->num_pages = 0;
+ memblock_dbg(PFX "Could not reserve boot range "
+ "[0x%010llx-0x%010llx]\n",
+ start, start+size-1);
+ } else
+ memblock_x86_reserve_range(start, start+size,
+ "EFI Boot");
}
}
md->type != EFI_BOOT_SERVICES_DATA)
continue;
+ /* Could not reserve boot area */
+ if (!size)
+ continue;
+
free_bootmem_late(start, size);
}
}
xen_reboot(SHUTDOWN_poweroff);
}
+static void xen_machine_power_off(void)
+{
+ if (pm_power_off)
+ pm_power_off();
+ xen_reboot(SHUTDOWN_poweroff);
+}
+
static void xen_crash_shutdown(struct pt_regs *regs)
{
xen_reboot(SHUTDOWN_crash);
static const struct machine_ops xen_machine_ops __initconst = {
.restart = xen_restart,
.halt = xen_machine_halt,
- .power_off = xen_machine_halt,
+ .power_off = xen_machine_power_off,
.shutdown = xen_machine_halt,
.crash_shutdown = xen_crash_shutdown,
.emergency_restart = xen_emergency_restart,
#include <asm/page.h>
#include <asm/init.h>
#include <asm/pat.h>
+#include <asm/smp.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
{
struct {
struct mmuext_op op;
- DECLARE_BITMAP(mask, NR_CPUS);
+ DECLARE_BITMAP(mask, num_processors);
} *args;
struct multicall_space mcs;
for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
pte_t pte;
+#ifdef CONFIG_X86_32
+ if (pfn > max_pfn_mapped)
+ max_pfn_mapped = pfn;
+#endif
+
if (!pte_none(pte_page[pteidx]))
continue;
initial_kernel_pmd =
extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
- max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->mfn_list));
+ max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
+ xen_start_info->nr_pt_frames * PAGE_SIZE +
+ 512*1024);
kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
unsigned argidx = roundup(b->argidx, sizeof(u64));
BUG_ON(preemptible());
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
if (b->mcidx == MC_BATCH ||
- (argidx + args) > MC_ARGS) {
+ (argidx + args) >= MC_ARGS) {
mc_stats_flush(b->mcidx == MC_BATCH ? FL_SLOTS : FL_ARGS);
xen_mc_flush();
argidx = roundup(b->argidx, sizeof(u64));
ret.args = &b->args[argidx];
b->argidx = argidx + args;
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
return ret;
}
struct multicall_space ret = { NULL, NULL };
BUG_ON(preemptible());
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
if (b->mcidx == 0)
return ret;
if (b->entries[b->mcidx - 1].op != op)
return ret;
- if ((b->argidx + size) > MC_ARGS)
+ if ((b->argidx + size) >= MC_ARGS)
return ret;
ret.mc = &b->entries[b->mcidx - 1];
ret.args = &b->args[b->argidx];
b->argidx += size;
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
return ret;
}
memcpy(map_raw, map, sizeof(map));
e820.nr_map = 0;
-#ifdef CONFIG_X86_32
xen_extra_mem_start = mem_end;
-#else
- xen_extra_mem_start = max((1ULL << 32), mem_end);
-#endif
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end;
if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
+ /* Align the balloon area so that max_low_pfn does not get set
+ * to be at the _end_ of the PCI gap at the far end (fee01000).
+ * Note that xen_extra_mem_start gets set in the loop above to be
+ * past the last E820 region. */
+ if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32)))
+ xen_extra_mem_start = (1ULL<<32);
/*
* In domU, the ISA region is normal, usable memory, but we
static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
{
unsigned cpu;
+ unsigned int i;
xen_init_lock_cpu(0);
smp_store_cpu_info(0);
cpu_data(0).x86_max_cores = 1;
+
+ for_each_possible_cpu(i) {
+ zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL);
+ }
set_cpu_sibling_map(0);
if (xen_smp_intr_init(0))
}
/*
- * Some controllers can't be frozen very well and may set
- * spuruious error conditions during reset. Clear accumulated
- * error information. As reset is the final recovery action,
- * nothing is lost by doing this.
+ * Some controllers can't be frozen very well and may set spurious
+ * error conditions during reset. Clear accumulated error
+ * information and re-thaw the port if frozen. As reset is the
+ * final recovery action and we cross check link onlineness against
+ * device classification later, no hotplug event is lost by this.
*/
spin_lock_irqsave(link->ap->lock, flags);
memset(&link->eh_info, 0, sizeof(link->eh_info));
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
spin_unlock_irqrestore(link->ap->lock, flags);
+ if (ap->pflags & ATA_PFLAG_FROZEN)
+ ata_eh_thaw_port(ap);
+
/*
* Make sure onlineness and classification result correspond.
* Hotplug could have happened during reset and some
{
struct pm_clk_notifier_block *clknb;
struct device *dev = data;
- char *con_id;
+ char **con_id;
int error;
dev_dbg(dev, "%s() %ld\n", __func__, action);
dev->pwr_domain = clknb->pwr_domain;
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- pm_runtime_clk_add(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ pm_runtime_clk_add(dev, *con_id);
} else {
pm_runtime_clk_add(dev, NULL);
}
{
struct pm_clk_notifier_block *clknb;
struct device *dev = data;
- char *con_id;
+ char **con_id;
dev_dbg(dev, "%s() %ld\n", __func__, action);
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- enable_clock(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ enable_clock(dev, *con_id);
} else {
enable_clock(dev, NULL);
}
break;
case BUS_NOTIFY_DEL_DEVICE:
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- disable_clock(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ disable_clock(dev, *con_id);
} else {
disable_clock(dev, NULL);
}
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.hscfgcmd = result;
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.psmode = result;
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.pscmd = result;
return -EFAULT;
ret = strict_strtol(buf, 16, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.gpio_gap = result;
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.hscmd = result;
if (priv->btmrvl_dev.hscmd) {
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.hsmode = result;
* This has the effect of treating non-periodic like periodic.
*/
if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) {
- unsigned long m, t;
+ unsigned long m, t, mc, base, k;
+ struct hpet __iomem *hpet = devp->hd_hpet;
+ struct hpets *hpetp = devp->hd_hpets;
t = devp->hd_ireqfreq;
m = read_counter(&devp->hd_timer->hpet_compare);
- write_counter(t + m, &devp->hd_timer->hpet_compare);
+ mc = read_counter(&hpet->hpet_mc);
+ /* The time for the next interrupt would logically be t + m,
+ * however, if we are very unlucky and the interrupt is delayed
+ * for longer than t then we will completely miss the next
+ * interrupt if we set t + m and an application will hang.
+ * Therefore we need to make a more complex computation assuming
+ * that there exists a k for which the following is true:
+ * k * t + base < mc + delta
+ * (k + 1) * t + base > mc + delta
+ * where t is the interval in hpet ticks for the given freq,
+ * base is the theoretical start value 0 < base < t,
+ * mc is the main counter value at the time of the interrupt,
+ * delta is the time it takes to write the a value to the
+ * comparator.
+ * k may then be computed as (mc - base + delta) / t .
+ */
+ base = mc % t;
+ k = (mc - base + hpetp->hp_delta) / t;
+ write_counter(t * (k + 1) + base,
+ &devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)
old_index = stat->last_index;
new_index = freq_table_get_index(stat, freq->new);
- cpufreq_stats_update(freq->cpu);
- if (old_index == new_index)
+ /* We can't do stat->time_in_state[-1]= .. */
+ if (old_index == -1 || new_index == -1)
return 0;
- if (old_index == -1 || new_index == -1)
+ cpufreq_stats_update(freq->cpu);
+
+ if (old_index == new_index)
return 0;
spin_lock(&cpufreq_stats_lock);
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
cpufreq_stats_free_table(cpu);
+ cpufreq_stats_free_sysfs(cpu);
}
}
}
res = transition_fid_vid(data, fid, vid);
+ if (res)
+ return res;
+
freqs.new = find_khz_freq_from_fid(data->currfid);
for_each_cpu(i, data->available_cores) {
/* get MSR index for hardware pstate transition */
pstate = index & HW_PSTATE_MASK;
if (pstate > data->max_hw_pstate)
- return 0;
+ return -EINVAL;
+
freqs.old = find_khz_freq_from_pstate(data->powernow_table,
data->currpstate);
freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
if (ret)
return ret;
- imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level);
+ imx_dma_config_burstlen(imxdmac->imxdma_channel,
+ imxdmac->watermark_level * imxdmac->word_size);
return 0;
default:
} else {
do {
for (i = chanirq_res->start; i <= chanirq_res->end; i++) {
+ if (irq_cnt >= SH_DMAC_MAX_CHANNELS) {
+ irq_cap = 1;
+ break;
+ }
+
if ((errirq_res->flags & IORESOURCE_BITS) ==
IORESOURCE_IRQ_SHAREABLE)
chan_flag[irq_cnt] = IRQF_SHARED;
"Found IRQ %d for channel %d\n",
i, irq_cnt);
chan_irq[irq_cnt++] = i;
-
- if (irq_cnt >= SH_DMAC_MAX_CHANNELS)
- break;
}
- if (irq_cnt >= SH_DMAC_MAX_CHANNELS) {
- irq_cap = 1;
+ if (irq_cnt >= SH_DMAC_MAX_CHANNELS)
break;
- }
+
chanirq_res = platform_get_resource(pdev,
IORESOURCE_IRQ, ++irqres);
} while (irq_cnt < pdata->channel_num && chanirq_res);
*/
unsigned long __init find_ibft_region(unsigned long *sizep)
{
+#ifdef CONFIG_ACPI
int i;
+#endif
ibft_addr = NULL;
#ifdef CONFIG_ACPI
Say yes here to support GPIO functionality of IT8761E super I/O chip.
config GPIO_EXYNOS4
- bool "Samsung Exynos4 GPIO library support"
- default y if CPU_EXYNOS4210
- depends on ARM
- help
- Say yes here to support Samsung Exynos4 series SoCs GPIO library
+ def_bool y
+ depends on CPU_EXYNOS4210
config GPIO_MXS
def_bool y
select GPIO_BASIC_MMIO_CORE
config GPIO_PLAT_SAMSUNG
- bool "Samsung SoCs GPIO library support"
- default y if SAMSUNG_GPIOLIB_4BIT
- depends on ARM
- help
- Say yes here to support Samsung SoCs GPIO library
+ def_bool y
+ depends on SAMSUNG_GPIOLIB_4BIT
config GPIO_S5PC100
- bool "Samsung S5PC100 GPIO library support"
- default y if CPU_S5PC100
- depends on ARM
- help
- Say yes here to support Samsung S5PC100 SoCs GPIO library
+ def_bool y
+ depends on CPU_S5PC100
config GPIO_S5PV210
- bool "Samsung S5PV210/S5PC110 GPIO library support"
- default y if CPU_S5PV210
- depends on ARM
- help
- Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library
+ def_bool y
+ depends on CPU_S5PV210
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
+int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ if (pull == S3C_GPIO_PULL_UP)
+ pull = 3;
+
+ return s3c_gpio_setpull_updown(chip, off, pull);
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ s3c_gpio_pull_t pull;
+
+ pull = s3c_gpio_getpull_updown(chip, off);
+ if (pull == 3)
+ pull = S3C_GPIO_PULL_UP;
+
+ return pull;
+}
+
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
+ .set_pull = s3c_gpio_setpull_exynos4,
+ .get_pull = s3c_gpio_getpull_exynos4,
};
static struct s3c_gpio_cfg gpio_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
+ .set_pull = s3c_gpio_setpull_exynos4,
+ .get_pull = s3c_gpio_getpull_exynos4,
};
/*
* Copyright (C) 2008,2009 STMicroelectronics
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
spinlock_t lock;
+ bool sleepmode;
/* Keep track of configured edges */
u32 edge_rising;
u32 edge_falling;
* @gpio: pin number
* @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
*
- * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is
- * changed to an input (with pullup/down enabled) in sleep and deep sleep. If
- * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
- * configured even when in sleep and deep sleep.
+ * This register is actually in the pinmux layer, not the GPIO block itself.
+ * The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP
+ * mode is entered (i.e. when signal IOFORCE is HIGH by the platform code).
+ * Each GPIO can be configured to be forced into GPIO mode when IOFORCE is
+ * HIGH, overriding the normal setting defined by GPIO_AFSELx registers.
+ * When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit),
+ * the GPIOs return to the normal setting defined by GPIO_AFSELx registers.
*
- * On DB8500v2 onwards, this setting loses the previous meaning and instead
- * indicates if wakeup detection is enabled on the pin. Note that
- * enable_irq_wake() will automatically enable wakeup detection.
+ * If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO
+ * mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is
+ * entered) regardless of the altfunction selected. Also wake-up detection is
+ * ENABLED.
+ *
+ * If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains
+ * controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS
+ * (for altfunction GPIO) or respective on-chip peripherals (for other
+ * altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED.
+ *
+ * Note that enable_irq_wake() will automatically enable wakeup detection.
*/
int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
{
static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
int gpio, bool on)
{
+ if (nmk_chip->sleepmode) {
+ __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base,
+ on ? NMK_GPIO_SLPM_WAKEUP_ENABLE
+ : NMK_GPIO_SLPM_WAKEUP_DISABLE);
+ }
+
__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
}
writel(chip->fwimsc & chip->real_wake,
chip->addr + NMK_GPIO_FWIMSC);
- if (cpu_is_u8500v2()) {
+ if (chip->sleepmode) {
chip->slpm = readl(chip->addr + NMK_GPIO_SLPC);
/* 0 -> wakeup enable */
writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
- if (cpu_is_u8500v2())
+ if (chip->sleepmode)
writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
}
}
nmk_chip->secondary_parent_irq = secondary_irq;
nmk_chip->get_secondary_status = pdata->get_secondary_status;
nmk_chip->set_ioforce = pdata->set_ioforce;
+ nmk_chip->sleepmode = pdata->supports_sleepmode;
spin_lock_init(&nmk_chip->lock);
chip = &nmk_chip->chip;
MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
MODULE_DESCRIPTION("Nomadik GPIO Driver");
MODULE_LICENSE("GPL");
-
-
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
- u32 val;
if (cpu_is_omap44xx()) {
MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
}
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (cpu_is_omap44xx()) {
- if (trigger != 0)
- __raw_writel(1 << gpio, bank->base+
- OMAP4_GPIO_IRQWAKEN0);
- else {
- val = __raw_readl(bank->base +
- OMAP4_GPIO_IRQWAKEN0);
- __raw_writel(val & (~(1 << gpio)), bank->base +
- OMAP4_GPIO_IRQWAKEN0);
- }
+ MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+ trigger != 0);
} else {
/*
* GPIO wakeup request can only be generated on edge
+ OMAP24XX_GPIO_CLEARWKUENA);
}
}
- /* This part needs to be executed always for OMAP34xx */
- if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+ /* This part needs to be executed always for OMAP{34xx, 44xx} */
+ if (cpu_is_omap34xx() || cpu_is_omap44xx() ||
+ (bank->non_wakeup_gpios & gpio_bit)) {
/*
* Log the edge gpio and manually trigger the IRQ
* after resume if the input level changes
{
unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->lock, flags);
_reset_gpio(bank, gpio);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static void gpio_ack_irq(struct irq_data *d)
{
unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->lock, flags);
_set_gpio_irqenable(bank, gpio, 0);
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static void gpio_unmask_irq(struct irq_data *d)
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
unsigned int irq_mask = 1 << get_gpio_index(gpio);
u32 trigger = irqd_get_trigger_type(d);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->lock, flags);
if (trigger)
_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
}
_set_gpio_irqenable(bank, gpio, 1);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static struct irq_chip gpio_irq_chip = {
}
}
-static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
{
int j;
static int gpio;
list_for_each_entry(entry, &dev->maplist, head) {
/*
* Because the kernel-userspace ABI is fixed at a 32-bit offset
- * while PCI resources may live above that, we ignore the map
- * offset for maps of type _DRM_FRAMEBUFFER or _DRM_REGISTERS.
- * It is assumed that each driver will have only one resource of
- * each type.
+ * while PCI resources may live above that, we only compare the
+ * lower 32 bits of the map offset for maps of type
+ * _DRM_FRAMEBUFFER or _DRM_REGISTERS.
+ * It is assumed that if a driver have more than one resource
+ * of each type, the lower 32 bits are different.
*/
if (!entry->map ||
map->type != entry->map->type ||
case _DRM_SHM:
if (map->flags != _DRM_CONTAINS_LOCK)
break;
+ return entry;
case _DRM_REGISTERS:
case _DRM_FRAME_BUFFER:
- return entry;
+ if ((entry->map->offset & 0xffffffff) ==
+ (map->offset & 0xffffffff))
+ return entry;
default: /* Make gcc happy */
;
}
kfree(map);
return -EINVAL;
}
-#endif
-#ifdef __alpha__
- map->offset += dev->hose->mem_space->start;
#endif
/* Some drivers preinitialize some maps, without the X Server
* needing to be aware of it. Therefore, we just return success
if (card_res->count_fbs >= fb_count) {
copied = 0;
fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
- list_for_each_entry(fb, &file_priv->fbs, head) {
+ list_for_each_entry(fb, &file_priv->fbs, filp_head) {
if (put_user(fb->base.id, fb_id + copied)) {
ret = -EFAULT;
goto out;
bad:
if (raw_edid) {
- DRM_ERROR("Raw EDID:\n");
+ printk(KERN_ERR "Raw EDID:\n");
print_hex_dump_bytes(KERN_ERR, DUMP_PREFIX_NONE, raw_edid, EDID_LENGTH);
- printk("\n");
+ printk(KERN_ERR "\n");
}
return 0;
}
return ret == 2 ? 0 : -1;
}
+static bool drm_edid_is_zero(u8 *in_edid, int length)
+{
+ int i;
+ u32 *raw_edid = (u32 *)in_edid;
+
+ for (i = 0; i < length / 4; i++)
+ if (*(raw_edid + i) != 0)
+ return false;
+ return true;
+}
+
static u8 *
drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
goto out;
if (drm_edid_block_valid(block))
break;
+ if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
+ connector->null_edid_counter++;
+ goto carp;
+ }
}
if (i == 4)
goto carp;
* IN THE SOFTWARE.
*/
#include <linux/compat.h>
+#include <linux/ratelimit.h>
#include "drmP.h"
#include "drm_core.h"
return -EFAULT;
m32.handle = (unsigned long)handle;
- if (m32.handle != (unsigned long)handle && printk_ratelimit())
- printk(KERN_ERR "compat_drm_addmap truncated handle"
- " %p for type %d offset %x\n",
- handle, m32.type, m32.offset);
+ if (m32.handle != (unsigned long)handle)
+ printk_ratelimited(KERN_ERR "compat_drm_addmap truncated handle"
+ " %p for type %d offset %x\n",
+ handle, m32.type, m32.offset);
if (copy_to_user(argp, &m32, sizeof(m32)))
return -EFAULT;
}
-int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p)
+static int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p)
{
if ((p->busnum >> 8) != drm_get_pci_domain(dev) ||
(p->busnum & 0xff) != dev->pdev->bus->number ||
.get_name = drm_pci_get_name,
.set_busid = drm_pci_set_busid,
.set_unique = drm_pci_set_unique,
+ .irq_by_busid = drm_pci_irq_by_busid,
.agp_init = drm_pci_agp_init,
};
static resource_size_t drm_core_get_reg_ofs(struct drm_device *dev)
{
#ifdef __alpha__
- return dev->hose->dense_mem_base - dev->hose->mem_space->start;
+ return dev->hose->dense_mem_base;
#else
return 0;
#endif
seq_printf(m, " INSTPM: 0x%08x\n", error->instpm);
seq_printf(m, " seqno: 0x%08x\n", error->seqno);
- for (i = 0; i < 16; i++)
+ for (i = 0; i < dev_priv->num_fence_regs; i++)
seq_printf(m, " fence[%d] = %08llx\n", i, error->fence[i]);
if (error->active_bo)
struct intel_fbdev *fbdev;
struct drm_property *broadcast_rgb_property;
+ struct drm_property *force_audio_property;
atomic_t forcewake_count;
} drm_i915_private_t;
} mm;
};
-enum intel_chip_family {
- CHIP_I8XX = 0x01,
- CHIP_I9XX = 0x02,
- CHIP_I915 = 0x04,
- CHIP_I965 = 0x08,
-};
-
#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
- page_offset = offset & (PAGE_SIZE-1);
+ page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
* data_page_offset = offset with data_page_index page.
* page_length = bytes to copy for this page
*/
- shmem_page_offset = offset & ~PAGE_MASK;
+ shmem_page_offset = offset_in_page(offset);
data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = data_ptr & ~PAGE_MASK;
+ data_page_offset = offset_in_page(data_ptr);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
GFP_HIGHUSER | __GFP_RECLAIMABLE);
- if (IS_ERR(page))
- return PTR_ERR(page);
+ if (IS_ERR(page)) {
+ ret = PTR_ERR(page);
+ goto out;
+ }
if (do_bit17_swizzling) {
slow_shmem_bit17_copy(page,
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
- page_base = (offset & ~(PAGE_SIZE-1));
- page_offset = offset & (PAGE_SIZE-1);
+ page_base = offset & PAGE_MASK;
+ page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
*/
if (fast_user_write(dev_priv->mm.gtt_mapping, page_base,
page_offset, user_data, page_length))
-
return -EFAULT;
remain -= page_length;
* page_length = bytes to copy for this page
*/
gtt_page_base = offset & PAGE_MASK;
- gtt_page_offset = offset & ~PAGE_MASK;
+ gtt_page_offset = offset_in_page(offset);
data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = data_ptr & ~PAGE_MASK;
+ data_page_offset = offset_in_page(data_ptr);
page_length = remain;
if ((gtt_page_offset + page_length) > PAGE_SIZE)
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
- page_offset = offset & (PAGE_SIZE-1);
+ page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
* data_page_offset = offset with data_page_index page.
* page_length = bytes to copy for this page
*/
- shmem_page_offset = offset & ~PAGE_MASK;
+ shmem_page_offset = offset_in_page(offset);
data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = data_ptr & ~PAGE_MASK;
+ data_page_offset = offset_in_page(data_ptr);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
* edge of an even tile row (where tile rows are counted as if the bo is
* placed in a fenced gtt region).
*/
- if (IS_GEN2(dev) ||
- (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
+ if (IS_GEN2(dev))
+ tile_height = 16;
+ else if (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
tile_height = 32;
else
tile_height = 8;
if (de_iir & DE_PIPEA_VBLANK_IVB)
drm_handle_vblank(dev, 0);
- if (de_iir & DE_PIPEB_VBLANK_IVB);
+ if (de_iir & DE_PIPEB_VBLANK_IVB)
drm_handle_vblank(dev, 1);
/* check event from PCH */
INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
I915_WRITE(HWSTAM, 0xeffe);
+ if (IS_GEN6(dev)) {
+ /* Workaround stalls observed on Sandy Bridge GPUs by
+ * making the blitter command streamer generate a
+ * write to the Hardware Status Page for
+ * MI_USER_INTERRUPT. This appears to serialize the
+ * previous seqno write out before the interrupt
+ * happens.
+ */
+ I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT);
+ }
/* XXX hotplug from PCH */
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
* have to check the EDID input spec of the attached device.
+ *
+ * On the other hand, what should we do if it is a broken EDID?
*/
if (edid != NULL) {
is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
if (!is_digital) {
DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
return true;
+ } else {
+ DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
}
}
#define ILK_LP0_PLANE_LATENCY 700
#define ILK_LP0_CURSOR_LATENCY 1300
-static bool ironlake_compute_wm0(struct drm_device *dev,
- int pipe,
- const struct intel_watermark_params *display,
- int display_latency_ns,
- const struct intel_watermark_params *cursor,
- int cursor_latency_ns,
- int *plane_wm,
- int *cursor_wm)
-{
- struct drm_crtc *crtc;
- int htotal, hdisplay, clock, pixel_size;
- int line_time_us, line_count;
- int entries, tlb_miss;
-
- crtc = intel_get_crtc_for_pipe(dev, pipe);
- if (crtc->fb == NULL || !crtc->enabled)
- return false;
-
- htotal = crtc->mode.htotal;
- hdisplay = crtc->mode.hdisplay;
- clock = crtc->mode.clock;
- pixel_size = crtc->fb->bits_per_pixel / 8;
-
- /* Use the small buffer method to calculate plane watermark */
- entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
- tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
- if (tlb_miss > 0)
- entries += tlb_miss;
- entries = DIV_ROUND_UP(entries, display->cacheline_size);
- *plane_wm = entries + display->guard_size;
- if (*plane_wm > (int)display->max_wm)
- *plane_wm = display->max_wm;
-
- /* Use the large buffer method to calculate cursor watermark */
- line_time_us = ((htotal * 1000) / clock);
- line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
- entries = line_count * 64 * pixel_size;
- tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
- if (tlb_miss > 0)
- entries += tlb_miss;
- entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
- *cursor_wm = entries + cursor->guard_size;
- if (*cursor_wm > (int)cursor->max_wm)
- *cursor_wm = (int)cursor->max_wm;
-
- return true;
-}
-
/*
* Check the wm result.
*
unsigned int enabled;
enabled = 0;
- if (ironlake_compute_wm0(dev, 0,
- &ironlake_display_wm_info,
- ILK_LP0_PLANE_LATENCY,
- &ironlake_cursor_wm_info,
- ILK_LP0_CURSOR_LATENCY,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 0,
+ &ironlake_display_wm_info,
+ ILK_LP0_PLANE_LATENCY,
+ &ironlake_cursor_wm_info,
+ ILK_LP0_CURSOR_LATENCY,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEA_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
enabled |= 1;
}
- if (ironlake_compute_wm0(dev, 1,
- &ironlake_display_wm_info,
- ILK_LP0_PLANE_LATENCY,
- &ironlake_cursor_wm_info,
- ILK_LP0_CURSOR_LATENCY,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 1,
+ &ironlake_display_wm_info,
+ ILK_LP0_PLANE_LATENCY,
+ &ironlake_cursor_wm_info,
+ ILK_LP0_CURSOR_LATENCY,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEB_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
unsigned int enabled;
enabled = 0;
- if (ironlake_compute_wm0(dev, 0,
- &sandybridge_display_wm_info, latency,
- &sandybridge_cursor_wm_info, latency,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 0,
+ &sandybridge_display_wm_info, latency,
+ &sandybridge_cursor_wm_info, latency,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEA_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
enabled |= 1;
}
- if (ironlake_compute_wm0(dev, 1,
- &sandybridge_display_wm_info, latency,
- &sandybridge_cursor_wm_info, latency,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 1,
+ &sandybridge_display_wm_info, latency,
+ &sandybridge_cursor_wm_info, latency,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEB_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
dev_priv->display.update_wm = NULL;
} else
dev_priv->display.update_wm = pineview_update_wm;
+ dev_priv->display.init_clock_gating = gen3_init_clock_gating;
} else if (IS_G4X(dev)) {
dev_priv->display.update_wm = g4x_update_wm;
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
bool is_pch_edp;
uint8_t train_set[4];
uint8_t link_status[DP_LINK_STATUS_SIZE];
-
- struct drm_property *force_audio_property;
};
/**
if (ret)
return ret;
- if (property == intel_dp->force_audio_property) {
+ if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
static void
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
{
- struct drm_device *dev = connector->dev;
-
- intel_dp->force_audio_property =
- drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2);
- if (intel_dp->force_audio_property) {
- intel_dp->force_audio_property->values[0] = -1;
- intel_dp->force_audio_property->values[1] = 1;
- drm_connector_attach_property(connector, intel_dp->force_audio_property, 0);
- }
-
+ intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
}
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus);
+extern void intel_attach_force_audio_property(struct drm_connector *connector);
extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
extern void intel_crt_init(struct drm_device *dev);
bool has_hdmi_sink;
bool has_audio;
int force_audio;
- struct drm_property *force_audio_property;
};
static struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
if (mode->clock < 20000)
- return MODE_CLOCK_HIGH;
+ return MODE_CLOCK_LOW;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
if (ret)
return ret;
- if (property == intel_hdmi->force_audio_property) {
+ if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
static void
intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
{
- struct drm_device *dev = connector->dev;
-
- intel_hdmi->force_audio_property =
- drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2);
- if (intel_hdmi->force_audio_property) {
- intel_hdmi->force_audio_property->values[0] = -1;
- intel_hdmi->force_audio_property->values[1] = 1;
- drm_connector_attach_property(connector, intel_hdmi->force_audio_property, 0);
- }
-
+ intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
}
bus->reg0 = i | GMBUS_RATE_100KHZ;
/* XXX force bit banging until GMBUS is fully debugged */
- if (IS_GEN2(dev))
- bus->force_bit = intel_gpio_create(dev_priv, i);
+ bus->force_bit = intel_gpio_create(dev_priv, i);
}
intel_i2c_reset(dev_priv->dev);
DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Asus EeeBox PC EB1007",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
+ },
+ },
{ } /* terminating entry */
};
return ret;
}
+static const char *force_audio_names[] = {
+ "off",
+ "auto",
+ "on",
+};
+
+void
+intel_attach_force_audio_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_property *prop;
+ int i;
+
+ prop = dev_priv->force_audio_property;
+ if (prop == NULL) {
+ prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+ "audio",
+ ARRAY_SIZE(force_audio_names));
+ if (prop == NULL)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(force_audio_names); i++)
+ drm_property_add_enum(prop, i, i-1, force_audio_names[i]);
+
+ dev_priv->force_audio_property = prop;
+ }
+ drm_connector_attach_property(connector, prop, 0);
+}
+
static const char *broadcast_rgb_names[] = {
"Full",
"Limited 16:235",
int format_supported_num;
struct drm_property *tv_format;
- struct drm_property *force_audio_property;
-
/* add the property for the SDVO-TV */
struct drm_property *left;
struct drm_property *right;
if (ret)
return ret;
- if (property == intel_sdvo_connector->force_audio_property) {
+ if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
{
struct drm_device *dev = connector->base.base.dev;
- connector->force_audio_property =
- drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2);
- if (connector->force_audio_property) {
- connector->force_audio_property->values[0] = -1;
- connector->force_audio_property->values[1] = 1;
- drm_connector_attach_property(&connector->base.base,
- connector->force_audio_property, 0);
- }
-
+ intel_attach_force_audio_property(&connector->base.base);
if (INTEL_INFO(dev)->gen >= 4 && IS_MOBILE(dev))
intel_attach_broadcast_rgb_property(&connector->base.base);
}
#define mga_flush_write_combine() DRM_WRITEMEMORYBARRIER()
-#if defined(__linux__) && defined(__alpha__)
-#define MGA_BASE(reg) ((unsigned long)(dev_priv->mmio->handle))
-#define MGA_ADDR(reg) (MGA_BASE(reg) + reg)
-
-#define MGA_DEREF(reg) (*(volatile u32 *)MGA_ADDR(reg))
-#define MGA_DEREF8(reg) (*(volatile u8 *)MGA_ADDR(reg))
-
-#define MGA_READ(reg) (_MGA_READ((u32 *)MGA_ADDR(reg)))
-#define MGA_READ8(reg) (_MGA_READ((u8 *)MGA_ADDR(reg)))
-#define MGA_WRITE(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF(reg) = val; } while (0)
-#define MGA_WRITE8(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8(reg) = val; } while (0)
-
-static inline u32 _MGA_READ(u32 *addr)
-{
- DRM_MEMORYBARRIER();
- return *(volatile u32 *)addr;
-}
-#else
#define MGA_READ8(reg) DRM_READ8(dev_priv->mmio, (reg))
#define MGA_READ(reg) DRM_READ32(dev_priv->mmio, (reg))
#define MGA_WRITE8(reg, val) DRM_WRITE8(dev_priv->mmio, (reg), (val))
#define MGA_WRITE(reg, val) DRM_WRITE32(dev_priv->mmio, (reg), (val))
-#endif
#define DWGREG0 0x1c00
#define DWGREG0_END 0x1dff
vga_count++;
retval = nouveau_dsm_pci_probe(pdev);
- printk("ret val is %d\n", retval);
if (retval & NOUVEAU_DSM_HAS_MUX)
has_dsm |= 1;
if (retval & NOUVEAU_DSM_HAS_OPT)
int ret;
if (dev_priv->chipset < 0x84) {
- ret = RING_SPACE(chan, 3);
+ ret = RING_SPACE(chan, 4);
if (ret)
return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 2);
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 3);
+ OUT_RING (chan, NvSema);
OUT_RING (chan, sema->mem->start);
OUT_RING (chan, 1);
} else
struct nouveau_vma *vma = &dev_priv->fence.bo->vma;
u64 offset = vma->offset + sema->mem->start;
- ret = RING_SPACE(chan, 5);
+ ret = RING_SPACE(chan, 7);
if (ret)
return ret;
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
+ OUT_RING (chan, chan->vram_handle);
BEGIN_RING(chan, NvSubSw, 0x0010, 4);
OUT_RING (chan, upper_32_bits(offset));
OUT_RING (chan, lower_32_bits(offset));
int ret;
if (dev_priv->chipset < 0x84) {
- ret = RING_SPACE(chan, 4);
+ ret = RING_SPACE(chan, 5);
if (ret)
return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 1);
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 2);
+ OUT_RING (chan, NvSema);
OUT_RING (chan, sema->mem->start);
BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_RELEASE, 1);
OUT_RING (chan, 1);
struct nouveau_vma *vma = &dev_priv->fence.bo->vma;
u64 offset = vma->offset + sema->mem->start;
- ret = RING_SPACE(chan, 5);
+ ret = RING_SPACE(chan, 7);
if (ret)
return ret;
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
+ OUT_RING (chan, chan->vram_handle);
BEGIN_RING(chan, NvSubSw, 0x0010, 4);
OUT_RING (chan, upper_32_bits(offset));
OUT_RING (chan, lower_32_bits(offset));
struct nouveau_gpuobj *obj = NULL;
int ret;
- if (dev_priv->card_type >= NV_C0)
- goto out_initialised;
+ if (dev_priv->card_type < NV_C0) {
+ /* Create an NV_SW object for various sync purposes */
+ ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW);
+ if (ret)
+ return ret;
- /* Create an NV_SW object for various sync purposes */
- ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW);
- if (ret)
- return ret;
+ ret = RING_SPACE(chan, 2);
+ if (ret)
+ return ret;
- /* we leave subchannel empty for nvc0 */
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
- BEGIN_RING(chan, NvSubSw, 0, 1);
- OUT_RING(chan, NvSw);
+ BEGIN_RING(chan, NvSubSw, 0, 1);
+ OUT_RING (chan, NvSw);
+ FIRE_RING (chan);
+ }
- /* Create a DMA object for the shared cross-channel sync area. */
+ /* Setup area of memory shared between all channels for x-chan sync */
if (USE_SEMA(dev) && dev_priv->chipset < 0x84) {
struct ttm_mem_reg *mem = &dev_priv->fence.bo->bo.mem;
nouveau_gpuobj_ref(NULL, &obj);
if (ret)
return ret;
-
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
- OUT_RING(chan, NvSema);
- } else {
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
- OUT_RING (chan, chan->vram_handle); /* whole VM */
}
- FIRE_RING(chan);
-
-out_initialised:
INIT_LIST_HEAD(&chan->fence.pending);
spin_lock_init(&chan->fence.lock);
atomic_set(&chan->fence.last_sequence_irq, 0);
}
/* NV11 and NV20 don't have this, they stop at 0x52. */
if (nv_gf4_disp_arch(dev)) {
+ rd_cio_state(dev, head, regp, NV_CIO_CRE_42);
rd_cio_state(dev, head, regp, NV_CIO_CRE_53);
rd_cio_state(dev, head, regp, NV_CIO_CRE_54);
nouveau_wait_eq(dev, 650000000, NV_PRMCIO_INP0__COLOR, 0x8, 0x0);
}
+ wr_cio_state(dev, head, regp, NV_CIO_CRE_42);
wr_cio_state(dev, head, regp, NV_CIO_CRE_53);
wr_cio_state(dev, head, regp, NV_CIO_CRE_54);
if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(40)))
dma_bits = 40;
} else
- if (drm_pci_device_is_pcie(dev) &&
+ if (0 && drm_pci_device_is_pcie(dev) &&
dev_priv->chipset > 0x40 &&
dev_priv->chipset != 0x45) {
if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(39)))
nouveau_vm_unmap(&node->tmp_vma);
nouveau_vm_put(&node->tmp_vma);
}
+
mem->mm_node = NULL;
+ kfree(node);
}
static int
entries = perf[2];
}
+ if (entries > NOUVEAU_PM_MAX_LEVEL) {
+ NV_DEBUG(dev, "perf table has too many entries - buggy vbios?\n");
+ entries = NOUVEAU_PM_MAX_LEVEL;
+ }
+
entry = perf + headerlen;
for (i = 0; i < entries; i++) {
struct nouveau_pm_level *perflvl = &pm->perflvl[pm->nr_perflvl];
dev_priv->gart_info.type = NOUVEAU_GART_HW;
dev_priv->gart_info.func = &nv50_sgdma_backend;
} else
- if (drm_pci_device_is_pcie(dev) &&
+ if (0 && drm_pci_device_is_pcie(dev) &&
dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) {
if (nv44_graph_class(dev)) {
dev_priv->gart_info.func = &nv44_sgdma_backend;
engine->vram.flags_valid = nv50_vram_flags_valid;
break;
case 0xC0:
+ case 0xD0:
engine->instmem.init = nvc0_instmem_init;
engine->instmem.takedown = nvc0_instmem_takedown;
engine->instmem.suspend = nvc0_instmem_suspend;
if (ret)
goto out_timer;
- switch (dev_priv->card_type) {
- case NV_04:
- nv04_graph_create(dev);
- break;
- case NV_10:
- nv10_graph_create(dev);
- break;
- case NV_20:
- case NV_30:
- nv20_graph_create(dev);
- break;
- case NV_40:
- nv40_graph_create(dev);
- break;
- case NV_50:
- nv50_graph_create(dev);
- break;
- case NV_C0:
- nvc0_graph_create(dev);
- break;
- default:
- break;
- }
-
- switch (dev_priv->chipset) {
- case 0x84:
- case 0x86:
- case 0x92:
- case 0x94:
- case 0x96:
- case 0xa0:
- nv84_crypt_create(dev);
- break;
- }
+ if (!nouveau_noaccel) {
+ switch (dev_priv->card_type) {
+ case NV_04:
+ nv04_graph_create(dev);
+ break;
+ case NV_10:
+ nv10_graph_create(dev);
+ break;
+ case NV_20:
+ case NV_30:
+ nv20_graph_create(dev);
+ break;
+ case NV_40:
+ nv40_graph_create(dev);
+ break;
+ case NV_50:
+ nv50_graph_create(dev);
+ break;
+ case NV_C0:
+ nvc0_graph_create(dev);
+ break;
+ default:
+ break;
+ }
- switch (dev_priv->card_type) {
- case NV_50:
switch (dev_priv->chipset) {
- case 0xa3:
- case 0xa5:
- case 0xa8:
- case 0xaf:
- nva3_copy_create(dev);
+ case 0x84:
+ case 0x86:
+ case 0x92:
+ case 0x94:
+ case 0x96:
+ case 0xa0:
+ nv84_crypt_create(dev);
break;
}
- break;
- case NV_C0:
- nvc0_copy_create(dev, 0);
- nvc0_copy_create(dev, 1);
- break;
- default:
- break;
- }
- if (dev_priv->card_type == NV_40)
- nv40_mpeg_create(dev);
- else
- if (dev_priv->card_type == NV_50 &&
- (dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0))
- nv50_mpeg_create(dev);
+ switch (dev_priv->card_type) {
+ case NV_50:
+ switch (dev_priv->chipset) {
+ case 0xa3:
+ case 0xa5:
+ case 0xa8:
+ case 0xaf:
+ nva3_copy_create(dev);
+ break;
+ }
+ break;
+ case NV_C0:
+ nvc0_copy_create(dev, 0);
+ nvc0_copy_create(dev, 1);
+ break;
+ default:
+ break;
+ }
+
+ if (dev_priv->card_type == NV_40)
+ nv40_mpeg_create(dev);
+ else
+ if (dev_priv->card_type == NV_50 &&
+ (dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0))
+ nv50_mpeg_create(dev);
- if (!nouveau_noaccel) {
for (e = 0; e < NVOBJ_ENGINE_NR; e++) {
if (dev_priv->eng[e]) {
ret = dev_priv->eng[e]->init(dev, e);
#ifdef __BIG_ENDIAN
/* Put the card in BE mode if it's not */
- if (nv_rd32(dev, NV03_PMC_BOOT_1))
- nv_wr32(dev, NV03_PMC_BOOT_1, 0x00000001);
+ if (nv_rd32(dev, NV03_PMC_BOOT_1) != 0x01000001)
+ nv_wr32(dev, NV03_PMC_BOOT_1, 0x01000001);
DRM_MEMORYBARRIER();
#endif
dev_priv->card_type = NV_50;
break;
case 0xc0:
+ case 0xd0:
dev_priv->card_type = NV_C0;
break;
default:
num -= len;
pte += len;
if (unlikely(end >= max)) {
+ phys += len << (bits + 12);
pde++;
pte = 0;
}
*/
/* framebuffer can be larger than crtc scanout area. */
- regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+ regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
+ XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+ regp->CRTC[NV_CIO_CRE_42] =
+ XLATE(fb->pitch / 8, 11, NV_CIO_CRE_42_OFFSET_11);
regp->CRTC[NV_CIO_CRE_RPC1_INDEX] = mode->crtc_hdisplay < 1280 ?
MASK(NV_CIO_CRE_RPC1_LARGE) : 0x00;
regp->CRTC[NV_CIO_CRE_LSR_INDEX] = XLATE(horizBlankEnd, 6, NV_CIO_CRE_LSR_HBE_6) |
regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = drm_fb->pitch >> 3;
regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
XLATE(drm_fb->pitch >> 3, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+ regp->CRTC[NV_CIO_CRE_42] =
+ XLATE(drm_fb->pitch / 8, 11, NV_CIO_CRE_42_OFFSET_11);
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_RPC0_INDEX);
crtc_wr_cio_state(crtc, regp, NV_CIO_CR_OFFSET_INDEX);
+ crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_42);
/* Update the framebuffer location. */
regp->fb_start = nv_crtc->fb.offset & ~3;
struct nouveau_channel *evo = dispc->sync;
int ret;
- ret = RING_SPACE(evo, 24);
+ ret = RING_SPACE(evo, chan ? 25 : 27);
if (unlikely(ret))
return ret;
/* queue the flip on the crtc's "display sync" channel */
BEGIN_RING(evo, 0, 0x0100, 1);
OUT_RING (evo, 0xfffe0000);
- BEGIN_RING(evo, 0, 0x0084, 5);
- OUT_RING (evo, chan ? 0x00000100 : 0x00000010);
+ if (chan) {
+ BEGIN_RING(evo, 0, 0x0084, 1);
+ OUT_RING (evo, 0x00000100);
+ } else {
+ BEGIN_RING(evo, 0, 0x0084, 1);
+ OUT_RING (evo, 0x00000010);
+ /* allows gamma somehow, PDISP will bitch at you if
+ * you don't wait for vblank before changing this..
+ */
+ BEGIN_RING(evo, 0, 0x00e0, 1);
+ OUT_RING (evo, 0x40000000);
+ }
+ BEGIN_RING(evo, 0, 0x0088, 4);
OUT_RING (evo, dispc->sem.offset);
OUT_RING (evo, 0xf00d0000 | dispc->sem.value);
OUT_RING (evo, 0x74b1e000);
# define NV_CIO_CRE_EBR_VDE_11 2:2
# define NV_CIO_CRE_EBR_VRS_11 4:4
# define NV_CIO_CRE_EBR_VBS_11 6:6
+# define NV_CIO_CRE_42 0x42
+# define NV_CIO_CRE_42_OFFSET_11 6:6
# define NV_CIO_CRE_43 0x43
# define NV_CIO_CRE_44 0x44 /* head control */
# define NV_CIO_CRE_CSB 0x45 /* colour saturation boost */
The kernel will also perform security check on command stream
provided by the user, we want to catch and forbid any illegal use
of the GPU such as DMA into random system memory or into memory
- not owned by the process supplying the command stream. This part
- of the code is still incomplete and this why we propose that patch
- as a staging driver addition, future security might forbid current
- experimental userspace to run.
-
- This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
- (radeon up to X1950). Works is underway to provide support for R6XX,
- R7XX and newer hardware (radeon from HD2XXX to HD4XXX).
+ not owned by the process supplying the command stream.
#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10
#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11
#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12
+#define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14
// ucConfig
#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
DISPPLL_CONFIG_DUAL_LINK;
}
}
+ if (radeon_encoder_is_dp_bridge(encoder)) {
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
+ struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
+ args.v3.sInput.ucExtTransmitterID = ext_radeon_encoder->encoder_id;
+ } else
+ args.v3.sInput.ucExtTransmitterID = 0;
+
atom_execute_table(rdev->mode_info.atom_context,
index, (uint32_t *)&args);
adjusted_clock = le32_to_cpu(args.v3.sOutput.ulDispPllFreq) * 10;
uint64_t fb_location;
uint32_t fb_format, fb_pitch_pixels, tiling_flags;
u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE);
- u32 tmp;
+ u32 tmp, viewport_w, viewport_h;
int r;
/* no fb bound */
y &= ~1;
WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset,
(x << 16) | y);
+ viewport_w = crtc->mode.hdisplay;
+ viewport_h = (crtc->mode.vdisplay + 1) & ~1;
WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
- (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+ (viewport_w << 16) | viewport_h);
/* pageflip setup */
/* make sure flip is at vb rather than hb */
uint64_t fb_location;
uint32_t fb_format, fb_pitch_pixels, tiling_flags;
u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE;
- u32 tmp;
+ u32 tmp, viewport_w, viewport_h;
int r;
/* no fb bound */
y &= ~1;
WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset,
(x << 16) | y);
+ viewport_w = crtc->mode.hdisplay;
+ viewport_h = (crtc->mode.vdisplay + 1) & ~1;
WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
- (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+ (viewport_w << 16) | viewport_h);
/* pageflip setup */
/* make sure flip is at vb rather than hb */
const u32 cayman_default_state[] =
{
- /* XXX fill in additional blit state */
+ 0xc0066900,
+ 0x00000000,
+ 0x00000060, /* DB_RENDER_CONTROL */
+ 0x00000000, /* DB_COUNT_CONTROL */
+ 0x00000000, /* DB_DEPTH_VIEW */
+ 0x0000002a, /* DB_RENDER_OVERRIDE */
+ 0x00000000, /* DB_RENDER_OVERRIDE2 */
+ 0x00000000, /* DB_HTILE_DATA_BASE */
0xc0026900,
- 0x00000316,
- 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */
- 0x00000010, /* */
+ 0x0000000a,
+ 0x00000000, /* DB_STENCIL_CLEAR */
+ 0x00000000, /* DB_DEPTH_CLEAR */
+
+ 0xc0036900,
+ 0x0000000f,
+ 0x00000000, /* DB_DEPTH_INFO */
+ 0x00000000, /* DB_Z_INFO */
+ 0x00000000, /* DB_STENCIL_INFO */
+
+ 0xc0016900,
+ 0x00000080,
+ 0x00000000, /* PA_SC_WINDOW_OFFSET */
+
+ 0xc00d6900,
+ 0x00000083,
+ 0x0000ffff, /* PA_SC_CLIPRECT_RULE */
+ 0x00000000, /* PA_SC_CLIPRECT_0_TL */
+ 0x20002000, /* PA_SC_CLIPRECT_0_BR */
+ 0x00000000,
+ 0x20002000,
+ 0x00000000,
+ 0x20002000,
+ 0x00000000,
+ 0x20002000,
+ 0xaaaaaaaa, /* PA_SC_EDGERULE */
+ 0x00000000, /* PA_SU_HARDWARE_SCREEN_OFFSET */
+ 0x0000000f, /* CB_TARGET_MASK */
+ 0x0000000f, /* CB_SHADER_MASK */
+
+ 0xc0226900,
+ 0x00000094,
+ 0x80000000, /* PA_SC_VPORT_SCISSOR_0_TL */
+ 0x20002000, /* PA_SC_VPORT_SCISSOR_0_BR */
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x00000000, /* PA_SC_VPORT_ZMIN_0 */
+ 0x3f800000, /* PA_SC_VPORT_ZMAX_0 */
+
+ 0xc0016900,
+ 0x000000d4,
+ 0x00000000, /* SX_MISC */
0xc0026900,
0x000000d9,
0x00000000, /* CP_RINGID */
0x00000000, /* CP_VMID */
+
+ 0xc0096900,
+ 0x00000100,
+ 0x00ffffff, /* VGT_MAX_VTX_INDX */
+ 0x00000000, /* VGT_MIN_VTX_INDX */
+ 0x00000000, /* VGT_INDX_OFFSET */
+ 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_INDX */
+ 0x00000000, /* SX_ALPHA_TEST_CONTROL */
+ 0x00000000, /* CB_BLEND_RED */
+ 0x00000000, /* CB_BLEND_GREEN */
+ 0x00000000, /* CB_BLEND_BLUE */
+ 0x00000000, /* CB_BLEND_ALPHA */
+
+ 0xc0016900,
+ 0x00000187,
+ 0x00000100, /* SPI_VS_OUT_ID_0 */
+
+ 0xc0026900,
+ 0x00000191,
+ 0x00000100, /* SPI_PS_INPUT_CNTL_0 */
+ 0x00000101, /* SPI_PS_INPUT_CNTL_1 */
+
+ 0xc0016900,
+ 0x000001b1,
+ 0x00000000, /* SPI_VS_OUT_CONFIG */
+
+ 0xc0106900,
+ 0x000001b3,
+ 0x20000001, /* SPI_PS_IN_CONTROL_0 */
+ 0x00000000, /* SPI_PS_IN_CONTROL_1 */
+ 0x00000000, /* SPI_INTERP_CONTROL_0 */
+ 0x00000000, /* SPI_INPUT_Z */
+ 0x00000000, /* SPI_FOG_CNTL */
+ 0x00100000, /* SPI_BARYC_CNTL */
+ 0x00000000, /* SPI_PS_IN_CONTROL_2 */
+ 0x00000000, /* SPI_COMPUTE_INPUT_CNTL */
+ 0x00000000, /* SPI_COMPUTE_NUM_THREAD_X */
+ 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Y */
+ 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Z */
+ 0x00000000, /* SPI_GPR_MGMT */
+ 0x00000000, /* SPI_LDS_MGMT */
+ 0x00000000, /* SPI_STACK_MGMT */
+ 0x00000000, /* SPI_WAVE_MGMT_1 */
+ 0x00000000, /* SPI_WAVE_MGMT_2 */
+
+ 0xc0016900,
+ 0x000001e0,
+ 0x00000000, /* CB_BLEND0_CONTROL */
+
+ 0xc00e6900,
+ 0x00000200,
+ 0x00000000, /* DB_DEPTH_CONTROL */
+ 0x00000000, /* DB_EQAA */
+ 0x00cc0010, /* CB_COLOR_CONTROL */
+ 0x00000210, /* DB_SHADER_CONTROL */
+ 0x00010000, /* PA_CL_CLIP_CNTL */
+ 0x00000004, /* PA_SU_SC_MODE_CNTL */
+ 0x00000100, /* PA_CL_VTE_CNTL */
+ 0x00000000, /* PA_CL_VS_OUT_CNTL */
+ 0x00000000, /* PA_CL_NANINF_CNTL */
+ 0x00000000, /* PA_SU_LINE_STIPPLE_CNTL */
+ 0x00000000, /* PA_SU_LINE_STIPPLE_SCALE */
+ 0x00000000, /* PA_SU_PRIM_FILTER_CNTL */
+ 0x00000000, /* */
+ 0x00000000, /* */
+
+ 0xc0026900,
+ 0x00000229,
+ 0x00000000, /* SQ_PGM_START_FS */
+ 0x00000000,
+
+ 0xc0016900,
+ 0x0000023b,
+ 0x00000000, /* SQ_LDS_ALLOC_PS */
+
+ 0xc0066900,
+ 0x00000240,
+ 0x00000000, /* SQ_ESGS_RING_ITEMSIZE */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ 0xc0046900,
+ 0x00000247,
+ 0x00000000, /* SQ_GS_VERT_ITEMSIZE */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ 0xc0116900,
+ 0x00000280,
+ 0x00000000, /* PA_SU_POINT_SIZE */
+ 0x00000000, /* PA_SU_POINT_MINMAX */
+ 0x00000008, /* PA_SU_LINE_CNTL */
+ 0x00000000, /* PA_SC_LINE_STIPPLE */
+ 0x00000000, /* VGT_OUTPUT_PATH_CNTL */
+ 0x00000000, /* VGT_HOS_CNTL */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000, /* VGT_GS_MODE */
+
+ 0xc0026900,
+ 0x00000292,
+ 0x00000000, /* PA_SC_MODE_CNTL_0 */
+ 0x00000000, /* PA_SC_MODE_CNTL_1 */
+
+ 0xc0016900,
+ 0x000002a1,
+ 0x00000000, /* VGT_PRIMITIVEID_EN */
+
+ 0xc0016900,
+ 0x000002a5,
+ 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_EN */
+
+ 0xc0026900,
+ 0x000002a8,
+ 0x00000000, /* VGT_INSTANCE_STEP_RATE_0 */
+ 0x00000000,
+
+ 0xc0026900,
+ 0x000002ad,
+ 0x00000000, /* VGT_REUSE_OFF */
+ 0x00000000,
+
+ 0xc0016900,
+ 0x000002d5,
+ 0x00000000, /* VGT_SHADER_STAGES_EN */
+
+ 0xc0016900,
+ 0x000002dc,
+ 0x0000aa00, /* DB_ALPHA_TO_MASK */
+
+ 0xc0066900,
+ 0x000002de,
+ 0x00000000, /* PA_SU_POLY_OFFSET_DB_FMT_CNTL */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ 0xc0026900,
+ 0x000002e5,
+ 0x00000000, /* VGT_STRMOUT_CONFIG */
+ 0x00000000,
+
+ 0xc01b6900,
+ 0x000002f5,
+ 0x76543210, /* PA_SC_CENTROID_PRIORITY_0 */
+ 0xfedcba98, /* PA_SC_CENTROID_PRIORITY_1 */
+ 0x00000000, /* PA_SC_LINE_CNTL */
+ 0x00000000, /* PA_SC_AA_CONFIG */
+ 0x00000005, /* PA_SU_VTX_CNTL */
+ 0x3f800000, /* PA_CL_GB_VERT_CLIP_ADJ */
+ 0x3f800000, /* PA_CL_GB_VERT_DISC_ADJ */
+ 0x3f800000, /* PA_CL_GB_HORZ_CLIP_ADJ */
+ 0x3f800000, /* PA_CL_GB_HORZ_DISC_ADJ */
+ 0x00000000, /* PA_SC_AA_SAMPLE_LOCS_PIXEL_X0Y0_0 */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xffffffff, /* PA_SC_AA_MASK_X0Y0_X1Y0 */
+ 0xffffffff,
+
+ 0xc0026900,
+ 0x00000316,
+ 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */
+ 0x00000010, /* */
+};
+
+const u32 cayman_vs[] =
+{
+ 0x00000004,
+ 0x80400400,
+ 0x0000a03c,
+ 0x95000688,
+ 0x00004000,
+ 0x15000688,
+ 0x00000000,
+ 0x88000000,
+ 0x04000000,
+ 0x67961001,
+#ifdef __BIG_ENDIAN
+ 0x00020000,
+#else
+ 0x00000000,
+#endif
+ 0x00000000,
+ 0x04000000,
+ 0x67961000,
+#ifdef __BIG_ENDIAN
+ 0x00020008,
+#else
+ 0x00000008,
+#endif
+ 0x00000000,
+};
+
+const u32 cayman_ps[] =
+{
+ 0x00000004,
+ 0xa00c0000,
+ 0x00000008,
+ 0x80400000,
+ 0x00000000,
+ 0x95000688,
+ 0x00000000,
+ 0x88000000,
+ 0x00380400,
+ 0x00146b10,
+ 0x00380000,
+ 0x20146b10,
+ 0x00380400,
+ 0x40146b00,
+ 0x80380000,
+ 0x60146b00,
+ 0x00000010,
+ 0x000d1000,
+ 0xb0800000,
+ 0x00000000,
};
+const u32 cayman_ps_size = ARRAY_SIZE(cayman_ps);
+const u32 cayman_vs_size = ARRAY_SIZE(cayman_vs);
const u32 cayman_default_size = ARRAY_SIZE(cayman_default_state);
#ifndef CAYMAN_BLIT_SHADERS_H
#define CAYMAN_BLIT_SHADERS_H
+extern const u32 cayman_ps[];
+extern const u32 cayman_vs[];
extern const u32 cayman_default_state[];
+extern const u32 cayman_ps_size, cayman_vs_size;
extern const u32 cayman_default_size;
#endif
/* get temperature in millidegrees */
int evergreen_get_temp(struct radeon_device *rdev)
{
- u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
- ASIC_T_SHIFT;
- u32 actual_temp = 0;
-
- if (temp & 0x400)
- actual_temp = -256;
- else if (temp & 0x200)
- actual_temp = 255;
- else if (temp & 0x100) {
- actual_temp = temp & 0x1ff;
- actual_temp |= ~0x1ff;
- } else
- actual_temp = temp & 0xff;
+ u32 temp, toffset;
+ int actual_temp = 0;
+
+ if (rdev->family == CHIP_JUNIPER) {
+ toffset = (RREG32(CG_THERMAL_CTRL) & TOFFSET_MASK) >>
+ TOFFSET_SHIFT;
+ temp = (RREG32(CG_TS0_STATUS) & TS0_ADC_DOUT_MASK) >>
+ TS0_ADC_DOUT_SHIFT;
+
+ if (toffset & 0x100)
+ actual_temp = temp / 2 - (0x200 - toffset);
+ else
+ actual_temp = temp / 2 + toffset;
+
+ actual_temp = actual_temp * 1000;
+
+ } else {
+ temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
+ ASIC_T_SHIFT;
+
+ if (temp & 0x400)
+ actual_temp = -256;
+ else if (temp & 0x200)
+ actual_temp = 255;
+ else if (temp & 0x100) {
+ actual_temp = temp & 0x1ff;
+ actual_temp |= ~0x1ff;
+ } else
+ actual_temp = temp & 0xff;
- return (actual_temp * 1000) / 2;
+ actual_temp = (actual_temp * 1000) / 2;
+ }
+
+ return actual_temp;
}
int sumo_get_temp(struct radeon_device *rdev)
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
if (voltage->type == VOLTAGE_SW) {
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->voltage == 0xff01)
+ return;
if (voltage->voltage && (voltage->voltage != rdev->pm.current_vddc)) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
DRM_DEBUG("Setting: vddc: %d\n", voltage->voltage);
}
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->vddci == 0xff01)
+ return;
if (voltage->vddci && (voltage->vddci != rdev->pm.current_vddci)) {
radeon_atom_set_voltage(rdev, voltage->vddci, SET_VOLTAGE_TYPE_ASIC_VDDCI);
rdev->pm.current_vddci = voltage->vddci;
case CHIP_CEDAR:
case CHIP_REDWOOD:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_TURKS:
case CHIP_CAICOS:
force_no_swizzle = false;
case CHIP_REDWOOD:
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_TURKS:
case CHIP_CAICOS:
default:
rdev->config.evergreen.max_hw_contexts = 4;
rdev->config.evergreen.sq_num_cf_insts = 1;
+ rdev->config.evergreen.sc_prim_fifo_size = 0x40;
+ rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
+ rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
+ break;
+ case CHIP_SUMO:
+ rdev->config.evergreen.num_ses = 1;
+ rdev->config.evergreen.max_pipes = 4;
+ rdev->config.evergreen.max_tile_pipes = 2;
+ if (rdev->pdev->device == 0x9648)
+ rdev->config.evergreen.max_simds = 3;
+ else if ((rdev->pdev->device == 0x9647) ||
+ (rdev->pdev->device == 0x964a))
+ rdev->config.evergreen.max_simds = 4;
+ else
+ rdev->config.evergreen.max_simds = 5;
+ rdev->config.evergreen.max_backends = 2 * rdev->config.evergreen.num_ses;
+ rdev->config.evergreen.max_gprs = 256;
+ rdev->config.evergreen.max_threads = 248;
+ rdev->config.evergreen.max_gs_threads = 32;
+ rdev->config.evergreen.max_stack_entries = 256;
+ rdev->config.evergreen.sx_num_of_sets = 4;
+ rdev->config.evergreen.sx_max_export_size = 256;
+ rdev->config.evergreen.sx_max_export_pos_size = 64;
+ rdev->config.evergreen.sx_max_export_smx_size = 192;
+ rdev->config.evergreen.max_hw_contexts = 8;
+ rdev->config.evergreen.sq_num_cf_insts = 2;
+
+ rdev->config.evergreen.sc_prim_fifo_size = 0x40;
+ rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
+ rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
+ break;
+ case CHIP_SUMO2:
+ rdev->config.evergreen.num_ses = 1;
+ rdev->config.evergreen.max_pipes = 4;
+ rdev->config.evergreen.max_tile_pipes = 4;
+ rdev->config.evergreen.max_simds = 2;
+ rdev->config.evergreen.max_backends = 1 * rdev->config.evergreen.num_ses;
+ rdev->config.evergreen.max_gprs = 256;
+ rdev->config.evergreen.max_threads = 248;
+ rdev->config.evergreen.max_gs_threads = 32;
+ rdev->config.evergreen.max_stack_entries = 512;
+ rdev->config.evergreen.sx_num_of_sets = 4;
+ rdev->config.evergreen.sx_max_export_size = 256;
+ rdev->config.evergreen.sx_max_export_pos_size = 64;
+ rdev->config.evergreen.sx_max_export_smx_size = 192;
+ rdev->config.evergreen.max_hw_contexts = 8;
+ rdev->config.evergreen.sq_num_cf_insts = 2;
+
rdev->config.evergreen.sc_prim_fifo_size = 0x40;
rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
switch (rdev->family) {
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_CAICOS:
/* no vertex cache */
sq_config &= ~VC_ENABLE;
switch (rdev->family) {
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
ps_thread_count = 96;
break;
default:
switch (rdev->family) {
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_CAICOS:
vgt_cache_invalidation = CACHE_INVALIDATION(TC_ONLY);
break;
int evergreen_irq_process(struct radeon_device *rdev)
{
- u32 wptr = evergreen_get_ih_wptr(rdev);
- u32 rptr = rdev->ih.rptr;
+ u32 wptr;
+ u32 rptr;
u32 src_id, src_data;
u32 ring_index;
unsigned long flags;
bool queue_hotplug = false;
- DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
- if (!rdev->ih.enabled)
+ if (!rdev->ih.enabled || rdev->shutdown)
return IRQ_NONE;
- spin_lock_irqsave(&rdev->ih.lock, flags);
+ wptr = evergreen_get_ih_wptr(rdev);
+ rptr = rdev->ih.rptr;
+ DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+ spin_lock_irqsave(&rdev->ih.lock, flags);
if (rptr == wptr) {
spin_unlock_irqrestore(&rdev->ih.lock, flags);
return IRQ_NONE;
}
- if (rdev->shutdown) {
- spin_unlock_irqrestore(&rdev->ih.lock, flags);
- return IRQ_NONE;
- }
-
restart_ih:
/* display interrupts */
evergreen_irq_ack(rdev);
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
- DRM_DEBUG("IH: CP EOP\n");
+ DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;
#include "evergreend.h"
#include "evergreen_blit_shaders.h"
+#include "cayman_blit_shaders.h"
#define DI_PT_RECTLIST 0x11
#define DI_INDEX_SIZE_16_BIT 0x0
if ((rdev->family == CHIP_CEDAR) ||
(rdev->family == CHIP_PALM) ||
+ (rdev->family == CHIP_SUMO) ||
+ (rdev->family == CHIP_SUMO2) ||
(rdev->family == CHIP_CAICOS))
cp_set_surface_sync(rdev,
PACKET3_TC_ACTION_ENA, 48, gpu_addr);
set_scissors(struct radeon_device *rdev, int x1, int y1,
int x2, int y2)
{
+ /* workaround some hw bugs */
+ if (x2 == 0)
+ x1 = 1;
+ if (y2 == 0)
+ y1 = 1;
+ if (rdev->family == CHIP_CAYMAN) {
+ if ((x2 == 1) && (y2 == 1))
+ x2 = 2;
+ }
+
radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONTEXT_REG, 2));
radeon_ring_write(rdev, (PA_SC_SCREEN_SCISSOR_TL - PACKET3_SET_CONTEXT_REG_START) >> 2);
radeon_ring_write(rdev, (x1 << 0) | (y1 << 16));
u64 gpu_addr;
int dwords;
- switch (rdev->family) {
- case CHIP_CEDAR:
- default:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 96;
- num_vs_threads = 16;
- num_gs_threads = 16;
- num_es_threads = 16;
- num_hs_threads = 16;
- num_ls_threads = 16;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_REDWOOD:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_JUNIPER:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 85;
- num_vs_stack_entries = 85;
- num_gs_stack_entries = 85;
- num_es_stack_entries = 85;
- num_hs_stack_entries = 85;
- num_ls_stack_entries = 85;
- break;
- case CHIP_CYPRESS:
- case CHIP_HEMLOCK:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 85;
- num_vs_stack_entries = 85;
- num_gs_stack_entries = 85;
- num_es_stack_entries = 85;
- num_hs_stack_entries = 85;
- num_ls_stack_entries = 85;
- break;
- case CHIP_PALM:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 96;
- num_vs_threads = 16;
- num_gs_threads = 16;
- num_es_threads = 16;
- num_hs_threads = 16;
- num_ls_threads = 16;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_BARTS:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 85;
- num_vs_stack_entries = 85;
- num_gs_stack_entries = 85;
- num_es_stack_entries = 85;
- num_hs_stack_entries = 85;
- num_ls_stack_entries = 85;
- break;
- case CHIP_TURKS:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_CAICOS:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 10;
- num_gs_threads = 10;
- num_es_threads = 10;
- num_hs_threads = 10;
- num_ls_threads = 10;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- }
-
- if ((rdev->family == CHIP_CEDAR) ||
- (rdev->family == CHIP_PALM) ||
- (rdev->family == CHIP_CAICOS))
- sq_config = 0;
- else
- sq_config = VC_ENABLE;
-
- sq_config |= (EXPORT_SRC_C |
- CS_PRIO(0) |
- LS_PRIO(0) |
- HS_PRIO(0) |
- PS_PRIO(0) |
- VS_PRIO(1) |
- GS_PRIO(2) |
- ES_PRIO(3));
-
- sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) |
- NUM_VS_GPRS(num_vs_gprs) |
- NUM_CLAUSE_TEMP_GPRS(num_temp_gprs));
- sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) |
- NUM_ES_GPRS(num_es_gprs));
- sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) |
- NUM_LS_GPRS(num_ls_gprs));
- sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) |
- NUM_VS_THREADS(num_vs_threads) |
- NUM_GS_THREADS(num_gs_threads) |
- NUM_ES_THREADS(num_es_threads));
- sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) |
- NUM_LS_THREADS(num_ls_threads));
- sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) |
- NUM_VS_STACK_ENTRIES(num_vs_stack_entries));
- sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) |
- NUM_ES_STACK_ENTRIES(num_es_stack_entries));
- sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) |
- NUM_LS_STACK_ENTRIES(num_ls_stack_entries));
-
/* set clear context state */
radeon_ring_write(rdev, PACKET3(PACKET3_CLEAR_STATE, 0));
radeon_ring_write(rdev, 0);
- /* disable dyn gprs */
- radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
- radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2);
- radeon_ring_write(rdev, 0);
+ if (rdev->family < CHIP_CAYMAN) {
+ switch (rdev->family) {
+ case CHIP_CEDAR:
+ default:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 16;
+ num_gs_threads = 16;
+ num_es_threads = 16;
+ num_hs_threads = 16;
+ num_ls_threads = 16;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_REDWOOD:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_JUNIPER:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_CYPRESS:
+ case CHIP_HEMLOCK:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_PALM:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 16;
+ num_gs_threads = 16;
+ num_es_threads = 16;
+ num_hs_threads = 16;
+ num_ls_threads = 16;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_SUMO:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 25;
+ num_gs_threads = 25;
+ num_es_threads = 25;
+ num_hs_threads = 25;
+ num_ls_threads = 25;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_SUMO2:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 25;
+ num_gs_threads = 25;
+ num_es_threads = 25;
+ num_hs_threads = 25;
+ num_ls_threads = 25;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_BARTS:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_TURKS:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_CAICOS:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 10;
+ num_gs_threads = 10;
+ num_es_threads = 10;
+ num_hs_threads = 10;
+ num_ls_threads = 10;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ }
- /* SQ config */
- radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11));
- radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2);
- radeon_ring_write(rdev, sq_config);
- radeon_ring_write(rdev, sq_gpr_resource_mgmt_1);
- radeon_ring_write(rdev, sq_gpr_resource_mgmt_2);
- radeon_ring_write(rdev, sq_gpr_resource_mgmt_3);
- radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, sq_thread_resource_mgmt);
- radeon_ring_write(rdev, sq_thread_resource_mgmt_2);
- radeon_ring_write(rdev, sq_stack_resource_mgmt_1);
- radeon_ring_write(rdev, sq_stack_resource_mgmt_2);
- radeon_ring_write(rdev, sq_stack_resource_mgmt_3);
+ if ((rdev->family == CHIP_CEDAR) ||
+ (rdev->family == CHIP_PALM) ||
+ (rdev->family == CHIP_SUMO) ||
+ (rdev->family == CHIP_SUMO2) ||
+ (rdev->family == CHIP_CAICOS))
+ sq_config = 0;
+ else
+ sq_config = VC_ENABLE;
+
+ sq_config |= (EXPORT_SRC_C |
+ CS_PRIO(0) |
+ LS_PRIO(0) |
+ HS_PRIO(0) |
+ PS_PRIO(0) |
+ VS_PRIO(1) |
+ GS_PRIO(2) |
+ ES_PRIO(3));
+
+ sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) |
+ NUM_VS_GPRS(num_vs_gprs) |
+ NUM_CLAUSE_TEMP_GPRS(num_temp_gprs));
+ sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) |
+ NUM_ES_GPRS(num_es_gprs));
+ sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) |
+ NUM_LS_GPRS(num_ls_gprs));
+ sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) |
+ NUM_VS_THREADS(num_vs_threads) |
+ NUM_GS_THREADS(num_gs_threads) |
+ NUM_ES_THREADS(num_es_threads));
+ sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) |
+ NUM_LS_THREADS(num_ls_threads));
+ sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) |
+ NUM_VS_STACK_ENTRIES(num_vs_stack_entries));
+ sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) |
+ NUM_ES_STACK_ENTRIES(num_es_stack_entries));
+ sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) |
+ NUM_LS_STACK_ENTRIES(num_ls_stack_entries));
+
+ /* disable dyn gprs */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
+ radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2);
+ radeon_ring_write(rdev, 0);
+
+ /* SQ config */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11));
+ radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2);
+ radeon_ring_write(rdev, sq_config);
+ radeon_ring_write(rdev, sq_gpr_resource_mgmt_1);
+ radeon_ring_write(rdev, sq_gpr_resource_mgmt_2);
+ radeon_ring_write(rdev, sq_gpr_resource_mgmt_3);
+ radeon_ring_write(rdev, 0);
+ radeon_ring_write(rdev, 0);
+ radeon_ring_write(rdev, sq_thread_resource_mgmt);
+ radeon_ring_write(rdev, sq_thread_resource_mgmt_2);
+ radeon_ring_write(rdev, sq_stack_resource_mgmt_1);
+ radeon_ring_write(rdev, sq_stack_resource_mgmt_2);
+ radeon_ring_write(rdev, sq_stack_resource_mgmt_3);
+ }
/* CONTEXT_CONTROL */
radeon_ring_write(rdev, 0xc0012800);
mutex_init(&rdev->r600_blit.mutex);
rdev->r600_blit.state_offset = 0;
- rdev->r600_blit.state_len = evergreen_default_size;
+ if (rdev->family < CHIP_CAYMAN)
+ rdev->r600_blit.state_len = evergreen_default_size;
+ else
+ rdev->r600_blit.state_len = cayman_default_size;
dwords = rdev->r600_blit.state_len;
while (dwords & 0xf) {
obj_size = ALIGN(obj_size, 256);
rdev->r600_blit.vs_offset = obj_size;
- obj_size += evergreen_vs_size * 4;
+ if (rdev->family < CHIP_CAYMAN)
+ obj_size += evergreen_vs_size * 4;
+ else
+ obj_size += cayman_vs_size * 4;
obj_size = ALIGN(obj_size, 256);
rdev->r600_blit.ps_offset = obj_size;
- obj_size += evergreen_ps_size * 4;
+ if (rdev->family < CHIP_CAYMAN)
+ obj_size += evergreen_ps_size * 4;
+ else
+ obj_size += cayman_ps_size * 4;
obj_size = ALIGN(obj_size, 256);
r = radeon_bo_create(rdev, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
return r;
}
- memcpy_toio(ptr + rdev->r600_blit.state_offset,
- evergreen_default_state, rdev->r600_blit.state_len * 4);
-
- if (num_packet2s)
- memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4),
- packet2s, num_packet2s * 4);
- for (i = 0; i < evergreen_vs_size; i++)
- *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]);
- for (i = 0; i < evergreen_ps_size; i++)
- *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]);
+ if (rdev->family < CHIP_CAYMAN) {
+ memcpy_toio(ptr + rdev->r600_blit.state_offset,
+ evergreen_default_state, rdev->r600_blit.state_len * 4);
+
+ if (num_packet2s)
+ memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4),
+ packet2s, num_packet2s * 4);
+ for (i = 0; i < evergreen_vs_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]);
+ for (i = 0; i < evergreen_ps_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]);
+ } else {
+ memcpy_toio(ptr + rdev->r600_blit.state_offset,
+ cayman_default_state, rdev->r600_blit.state_len * 4);
+
+ if (num_packet2s)
+ memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4),
+ packet2s, num_packet2s * 4);
+ for (i = 0; i < cayman_vs_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(cayman_vs[i]);
+ for (i = 0; i < cayman_ps_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(cayman_ps[i]);
+ }
radeon_bo_kunmap(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
#define SE_DB_BUSY (1 << 30)
#define SE_CB_BUSY (1 << 31)
/* evergreen */
+#define CG_THERMAL_CTRL 0x72c
+#define TOFFSET_MASK 0x00003FE0
+#define TOFFSET_SHIFT 5
#define CG_MULT_THERMAL_STATUS 0x740
#define ASIC_T(x) ((x) << 16)
-#define ASIC_T_MASK 0x7FF0000
+#define ASIC_T_MASK 0x07FF0000
#define ASIC_T_SHIFT 16
+#define CG_TS0_STATUS 0x760
+#define TS0_ADC_DOUT_MASK 0x000003FF
+#define TS0_ADC_DOUT_SHIFT 0
/* APU */
#define CG_THERMAL_STATUS 0x678
return r;
cayman_gpu_init(rdev);
-#if 0
- r = cayman_blit_init(rdev);
+ r = evergreen_blit_init(rdev);
if (r) {
- cayman_blit_fini(rdev);
+ evergreen_blit_fini(rdev);
rdev->asic->copy = NULL;
dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
}
-#endif
/* allocate wb buffer */
r = radeon_wb_init(rdev);
int cayman_suspend(struct radeon_device *rdev)
{
- /* int r; */
+ int r;
/* FIXME: we should wait for ring to be empty */
cayman_cp_enable(rdev, false);
radeon_wb_disable(rdev);
cayman_pcie_gart_disable(rdev);
-#if 0
/* unpin shaders bo */
r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
if (likely(r == 0)) {
radeon_bo_unpin(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
}
-#endif
+
return 0;
}
void cayman_fini(struct radeon_device *rdev)
{
- /* cayman_blit_fini(rdev); */
+ evergreen_blit_fini(rdev);
cayman_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
unsigned num_arrays;
unsigned max_indx;
unsigned color_channel_mask;
- struct r100_cs_track_array arrays[11];
+ struct r100_cs_track_array arrays[16];
struct r100_cs_track_cb cb[R300_MAX_CB];
struct r100_cs_track_cb zb;
struct r100_cs_track_cb aa;
ib = p->ib->ptr;
track = (struct r100_cs_track *)p->track;
c = radeon_get_ib_value(p, idx++) & 0x1F;
+ if (c > 16) {
+ DRM_ERROR("Only 16 vertex buffers are allowed %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
track->num_arrays = c;
for (i = 0; i < (c - 1); i+=2, idx+=3) {
r = r100_cs_packet_next_reloc(p, &reloc);
MODULE_FIRMWARE("radeon/PALM_pfp.bin");
MODULE_FIRMWARE("radeon/PALM_me.bin");
MODULE_FIRMWARE("radeon/SUMO_rlc.bin");
+MODULE_FIRMWARE("radeon/SUMO_pfp.bin");
+MODULE_FIRMWARE("radeon/SUMO_me.bin");
+MODULE_FIRMWARE("radeon/SUMO2_pfp.bin");
+MODULE_FIRMWARE("radeon/SUMO2_me.bin");
int r600_debugfs_mc_info_init(struct radeon_device *rdev);
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->voltage == 0xff01)
+ return;
if (voltage->voltage != rdev->pm.current_vddc) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
chip_name = "PALM";
rlc_chip_name = "SUMO";
break;
+ case CHIP_SUMO:
+ chip_name = "SUMO";
+ rlc_chip_name = "SUMO";
+ break;
+ case CHIP_SUMO2:
+ chip_name = "SUMO2";
+ rlc_chip_name = "SUMO";
+ break;
default: BUG();
}
int r600_irq_process(struct radeon_device *rdev)
{
- u32 wptr = r600_get_ih_wptr(rdev);
- u32 rptr = rdev->ih.rptr;
+ u32 wptr;
+ u32 rptr;
u32 src_id, src_data;
u32 ring_index;
unsigned long flags;
bool queue_hotplug = false;
- DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
- if (!rdev->ih.enabled)
+ if (!rdev->ih.enabled || rdev->shutdown)
return IRQ_NONE;
+ wptr = r600_get_ih_wptr(rdev);
+ rptr = rdev->ih.rptr;
+ DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+
spin_lock_irqsave(&rdev->ih.lock, flags);
if (rptr == wptr) {
spin_unlock_irqrestore(&rdev->ih.lock, flags);
return IRQ_NONE;
}
- if (rdev->shutdown) {
- spin_unlock_irqrestore(&rdev->ih.lock, flags);
- return IRQ_NONE;
- }
restart_ih:
/* display interrupts */
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
- DRM_DEBUG("IH: CP EOP\n");
+ DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;
u64 db_bo_mc;
};
-#define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc }
-#define FMT_16_BIT(fmt, vc) [fmt] = { 1, 1, 2, vc }
-#define FMT_24_BIT(fmt) [fmt] = { 1, 1, 3, 0 }
-#define FMT_32_BIT(fmt, vc) [fmt] = { 1, 1, 4, vc }
-#define FMT_48_BIT(fmt) [fmt] = { 1, 1, 6, 0 }
-#define FMT_64_BIT(fmt, vc) [fmt] = { 1, 1, 8, vc }
-#define FMT_96_BIT(fmt) [fmt] = { 1, 1, 12, 0 }
-#define FMT_128_BIT(fmt, vc) [fmt] = { 1, 1, 16, vc }
+#define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc, CHIP_R600 }
+#define FMT_16_BIT(fmt, vc) [fmt] = { 1, 1, 2, vc, CHIP_R600 }
+#define FMT_24_BIT(fmt) [fmt] = { 1, 1, 3, 0, CHIP_R600 }
+#define FMT_32_BIT(fmt, vc) [fmt] = { 1, 1, 4, vc, CHIP_R600 }
+#define FMT_48_BIT(fmt) [fmt] = { 1, 1, 6, 0, CHIP_R600 }
+#define FMT_64_BIT(fmt, vc) [fmt] = { 1, 1, 8, vc, CHIP_R600 }
+#define FMT_96_BIT(fmt) [fmt] = { 1, 1, 12, 0, CHIP_R600 }
+#define FMT_128_BIT(fmt, vc) [fmt] = { 1, 1, 16,vc, CHIP_R600 }
struct gpu_formats {
unsigned blockwidth;
unsigned blockheight;
unsigned blocksize;
unsigned valid_color;
+ enum radeon_family min_family;
};
static const struct gpu_formats color_formats_table[] = {
[V_038004_FMT_BC3] = { 4, 4, 16, 0 },
[V_038004_FMT_BC4] = { 4, 4, 8, 0 },
[V_038004_FMT_BC5] = { 4, 4, 16, 0},
+ [V_038004_FMT_BC6] = { 4, 4, 16, 0, CHIP_CEDAR}, /* Evergreen-only */
+ [V_038004_FMT_BC7] = { 4, 4, 16, 0, CHIP_CEDAR}, /* Evergreen-only */
+ /* The other Evergreen formats */
+ [V_038004_FMT_32_AS_32_32_32_32] = { 1, 1, 4, 0, CHIP_CEDAR},
};
static inline bool fmt_is_valid_color(u32 format)
return false;
}
-static inline bool fmt_is_valid_texture(u32 format)
+static inline bool fmt_is_valid_texture(u32 format, enum radeon_family family)
{
if (format >= ARRAY_SIZE(color_formats_table))
return false;
+ if (family < color_formats_table[format].min_family)
+ return false;
+
if (color_formats_table[format].blockwidth > 0)
return true;
return -EINVAL;
}
format = G_038004_DATA_FORMAT(word1);
- if (!fmt_is_valid_texture(format)) {
+ if (!fmt_is_valid_texture(format, p->family)) {
dev_warn(p->dev, "%s:%d texture invalid format %d\n",
__func__, __LINE__, format);
return -EINVAL;
#define V_038004_FMT_BC3 0x00000033
#define V_038004_FMT_BC4 0x00000034
#define V_038004_FMT_BC5 0x00000035
+#define V_038004_FMT_BC6 0x00000036
+#define V_038004_FMT_BC7 0x00000037
+#define V_038004_FMT_32_AS_32_32_32_32 0x00000038
#define R_038010_SQ_TEX_RESOURCE_WORD4_0 0x038010
#define S_038010_FORMAT_COMP_X(x) (((x) & 0x3) << 0)
#define G_038010_FORMAT_COMP_X(x) (((x) >> 0) & 0x3)
uint32_t default_sclk;
uint32_t default_dispclk;
uint32_t dp_extclk;
+ uint32_t max_pixel_clock;
};
/*
.get_vblank_counter = &evergreen_get_vblank_counter,
.fence_ring_emit = &r600_fence_ring_emit,
.cs_parse = &evergreen_cs_parse,
- .copy_blit = NULL,
- .copy_dma = NULL,
- .copy = NULL,
+ .copy_blit = &evergreen_copy_blit,
+ .copy_dma = &evergreen_copy_blit,
+ .copy = &evergreen_copy_blit,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = &radeon_atom_get_memory_clock,
int radeon_asic_init(struct radeon_device *rdev)
{
radeon_register_accessor_init(rdev);
+
+ /* set the number of crtcs */
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ rdev->num_crtc = 1;
+ else
+ rdev->num_crtc = 2;
+
switch (rdev->family) {
case CHIP_R100:
case CHIP_RV100:
case CHIP_JUNIPER:
case CHIP_CYPRESS:
case CHIP_HEMLOCK:
+ /* set num crtcs */
+ if (rdev->family == CHIP_CEDAR)
+ rdev->num_crtc = 4;
+ else
+ rdev->num_crtc = 6;
rdev->asic = &evergreen_asic;
break;
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
rdev->asic = &sumo_asic;
break;
case CHIP_BARTS:
case CHIP_TURKS:
case CHIP_CAICOS:
+ /* set num crtcs */
+ if (rdev->family == CHIP_CAICOS)
+ rdev->num_crtc = 4;
+ else
+ rdev->num_crtc = 6;
rdev->asic = &btc_asic;
break;
case CHIP_CAYMAN:
rdev->asic = &cayman_asic;
+ /* set num crtcs */
+ rdev->num_crtc = 6;
break;
default:
/* FIXME: not supported yet */
rdev->asic->set_memory_clock = NULL;
}
- /* set the number of crtcs */
- if (rdev->flags & RADEON_SINGLE_CRTC)
- rdev->num_crtc = 1;
- else {
- if (ASIC_IS_DCE41(rdev))
- rdev->num_crtc = 2;
- else if (ASIC_IS_DCE4(rdev))
- rdev->num_crtc = 6;
- else
- rdev->num_crtc = 2;
- }
-
return 0;
}
}
*dcpll = *p1pll;
+ rdev->clock.max_pixel_clock = le16_to_cpu(firmware_info->info.usMaxPixelClock);
+ if (rdev->clock.max_pixel_clock == 0)
+ rdev->clock.max_pixel_clock = 40000;
+
return true;
}
if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
return;
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage_level == 0xff01)
+ return;
+
switch (crev) {
case 1:
args.v1.ucVoltageType = voltage_type;
p1pll->reference_div = RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
if (p1pll->reference_div < 2)
p1pll->reference_div = 12;
- p2pll->reference_div = p1pll->reference_div;
+ p2pll->reference_div = p1pll->reference_div;
/* These aren't in the device-tree */
if (rdev->family >= CHIP_R420) {
p2pll->pll_out_min = 12500;
p2pll->pll_out_max = 35000;
}
+ /* not sure what the max should be in all cases */
+ rdev->clock.max_pixel_clock = 35000;
spll->reference_freq = mpll->reference_freq = p1pll->reference_freq;
spll->reference_div = mpll->reference_div =
else
rdev->clock.default_sclk =
radeon_legacy_get_engine_clock(rdev);
-
+
val = of_get_property(dp, "ATY,MCLK", NULL);
if (val && *val)
rdev->clock.default_mclk = (*val) / 10;
radeon_legacy_get_memory_clock(rdev);
DRM_INFO("Using device-tree clock info\n");
-
+
return true;
}
#else
rdev->clock.default_sclk = sclk;
rdev->clock.default_mclk = mclk;
+ if (RBIOS32(pll_info + 0x16))
+ rdev->clock.max_pixel_clock = RBIOS32(pll_info + 0x16);
+ else
+ rdev->clock.max_pixel_clock = 35000; /* might need something asic specific */
+
return true;
}
return false;
(rdev->pdev->subsystem_device == 0x4a48)) {
/* Mac X800 */
rdev->mode_info.connector_table = CT_MAC_X800;
- } else if ((rdev->pdev->device == 0x4150) &&
+ } else if ((of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3")) &&
+ (rdev->pdev->device == 0x4150) &&
(rdev->pdev->subsystem_vendor == 0x1002) &&
(rdev->pdev->subsystem_device == 0x4150)) {
- /* Mac G5 9600 */
+ /* Mac G5 tower 9600 */
rdev->mode_info.connector_table = CT_MAC_G5_9600;
} else
#endif /* CONFIG_PPC_PMAC */
radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder,
struct drm_connector *drm_connector);
+bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector);
+
void radeon_connector_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
static int radeon_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
/* XXX check mode bandwidth */
- /* XXX verify against max DAC output frequency */
+
+ if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
return MODE_OK;
}
if (!radeon_connector->edid) {
DRM_ERROR("%s: probed a monitor but no|invalid EDID\n",
drm_get_connector_name(connector));
+ /* rs690 seems to have a problem with connectors not existing and always
+ * return a block of 0's. If we see this just stop polling on this output */
+ if ((rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) && radeon_connector->base.null_edid_counter) {
+ ret = connector_status_disconnected;
+ DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector));
+ radeon_connector->ddc_bus = NULL;
+ }
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
} else
return MODE_CLOCK_HIGH;
}
+
+ /* check against the max pixel clock */
+ if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
return MODE_OK;
}
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
int ret;
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
- struct drm_encoder *encoder;
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_display_mode *mode;
if (!radeon_dig_connector->edp_on)
ATOM_TRANSMITTER_ACTION_POWER_OFF);
if (ret > 0) {
- encoder = radeon_best_single_encoder(connector);
if (encoder) {
radeon_fixup_lvds_native_mode(encoder, connector);
/* add scaled modes */
/* add scaled modes */
radeon_add_common_modes(encoder, connector);
}
- } else
+ } else {
+ /* need to setup ddc on the bridge */
+ if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ if (encoder)
+ radeon_atom_ext_encoder_setup_ddc(encoder);
+ }
ret = radeon_ddc_get_modes(radeon_connector);
+ }
return ret;
}
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
enum drm_connector_status ret = connector_status_disconnected;
struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
}
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
- struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
if (encoder) {
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_OFF);
} else {
+ /* need to setup ddc on the bridge */
+ if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ if (encoder)
+ radeon_atom_ext_encoder_setup_ddc(encoder);
+ }
radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector);
if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
ret = connector_status_connected;
ret = connector_status_connected;
}
}
+
+ if ((ret == connector_status_disconnected) &&
+ radeon_connector->dac_load_detect) {
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ if (encoder) {
+ encoder_funcs = encoder->helper_private;
+ ret = encoder_funcs->detect(encoder, connector);
+ }
+ }
}
radeon_connector_update_scratch_regs(connector, ret);
/* XXX check mode bandwidth */
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_encoder *encoder = radeon_best_single_encoder(connector);
if ((mode->hdisplay < 320) || (mode->vdisplay < 240))
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
- /* AVIVO hardware supports downscaling modes larger than the panel
+ /* AVIVO hardware supports downscaling modes larger than the panel
* to the panel size, but I'm not sure this is desirable.
*/
if ((mode->hdisplay > native_mode->hdisplay) ||
default:
connector->interlace_allowed = true;
connector->doublescan_allowed = true;
+ radeon_connector->dac_load_detect = true;
+ drm_connector_attach_property(&radeon_connector->base,
+ rdev->mode_info.load_detect_property,
+ 1);
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
connector->doublescan_allowed = true;
else
connector->doublescan_allowed = false;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII) {
+ radeon_connector->dac_load_detect = true;
+ drm_connector_attach_property(&radeon_connector->base,
+ rdev->mode_info.load_detect_property,
+ 1);
+ }
break;
case DRM_MODE_CONNECTOR_LVDS:
case DRM_MODE_CONNECTOR_eDP:
parser.filp = filp;
parser.rdev = rdev;
parser.dev = rdev->dev;
+ parser.family = rdev->family;
r = radeon_cs_parser_init(&parser, data);
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
"CYPRESS",
"HEMLOCK",
"PALM",
+ "SUMO",
+ "SUMO2",
"BARTS",
"TURKS",
"CAICOS",
return r;
}
+ /* clear wb memory */
+ memset((char *)rdev->wb.wb, 0, RADEON_GPU_PAGE_SIZE);
/* disable event_write fences */
rdev->wb.use_event = false;
/* disabled via module param */
dma_bits = rdev->need_dma32 ? 32 : 40;
r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
if (r) {
+ rdev->need_dma32 = true;
printk(KERN_WARNING "radeon: No suitable DMA available.\n");
}
radeon_bo_unreserve(work->old_rbo);
} else
DRM_ERROR("failed to reserve buffer after flip\n");
+
+ drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base);
kfree(work);
}
new_radeon_fb = to_radeon_framebuffer(fb);
/* schedule unpin of the old buffer */
obj = old_radeon_fb->obj;
+ /* take a reference to the old object */
+ drm_gem_object_reference(obj);
rbo = gem_to_radeon_bo(obj);
work->old_rbo = rbo;
INIT_WORK(&work->work, radeon_unpin_work_func);
/* We borrow the event spin lock for protecting unpin_work */
spin_lock_irqsave(&dev->event_lock, flags);
if (radeon_crtc->unpin_work) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(work);
- radeon_fence_unref(&fence);
-
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
- return -EBUSY;
+ r = -EBUSY;
+ goto unlock_free;
}
radeon_crtc->unpin_work = work;
radeon_crtc->deferred_flip_completion = 0;
pflip_cleanup:
spin_lock_irqsave(&dev->event_lock, flags);
radeon_crtc->unpin_work = NULL;
+unlock_free:
+ drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
spin_unlock_irqrestore(&dev->event_lock, flags);
radeon_fence_unref(&fence);
kfree(work);
int radeon_testing = 0;
int radeon_connector_table = 0;
int radeon_tv = 1;
-int radeon_audio = 1;
+int radeon_audio = 0;
int radeon_disp_priority = 0;
int radeon_hw_i2c = 0;
int radeon_pcie_gen2 = 0;
MODULE_PARM_DESC(tv, "TV enable (0 = disable)");
module_param_named(tv, radeon_tv, int, 0444);
-MODULE_PARM_DESC(audio, "Audio enable (0 = disable)");
+MODULE_PARM_DESC(audio, "Audio enable (1 = enable)");
module_param_named(audio, radeon_audio, int, 0444);
MODULE_PARM_DESC(disp_priority, "Display Priority (0 = auto, 1 = normal, 2 = high)");
}
if (ASIC_IS_DCE3(rdev) &&
- (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT))) {
+ ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
+ radeon_encoder_is_dp_bridge(encoder))) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
radeon_dp_set_link_config(connector, mode);
}
if (radeon_encoder_is_dp_bridge(encoder))
return ATOM_ENCODER_MODE_DP;
+ /* DVO is always DVO */
+ if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO)
+ return ATOM_ENCODER_MODE_DVO;
+
connector = radeon_get_connector_for_encoder(encoder);
- if (!connector) {
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- return ATOM_ENCODER_MODE_DVI;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- default:
- return ATOM_ENCODER_MODE_CRT;
- }
- }
+ /* if we don't have an active device yet, just use one of
+ * the connectors tied to the encoder.
+ */
+ if (!connector)
+ connector = radeon_get_connector_for_encoder_init(encoder);
radeon_connector = to_radeon_connector(connector);
switch (connector->connector_type) {
int dp_lane_count = 0;
int connector_object_id = 0;
int igp_lane_info = 0;
+ int dig_encoder = dig->dig_encoder;
- if (action == ATOM_TRANSMITTER_ACTION_INIT)
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
connector = radeon_get_connector_for_encoder_init(encoder);
- else
+ /* just needed to avoid bailing in the encoder check. the encoder
+ * isn't used for init
+ */
+ dig_encoder = 0;
+ } else
connector = radeon_get_connector_for_encoder(encoder);
if (connector) {
}
/* no dig encoder assigned */
- if (dig->dig_encoder == -1)
+ if (dig_encoder == -1)
return;
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP)
if (dig->linkb)
args.v3.acConfig.ucLinkSel = 1;
- if (dig->dig_encoder & 1)
+ if (dig_encoder & 1)
args.v3.acConfig.ucEncoderSel = 1;
/* Select the PLL for the PHY
args.v3.acConfig.fDualLinkConnector = 1;
}
} else if (ASIC_IS_DCE32(rdev)) {
- args.v2.acConfig.ucEncoderSel = dig->dig_encoder;
+ args.v2.acConfig.ucEncoderSel = dig_encoder;
if (dig->linkb)
args.v2.acConfig.ucLinkSel = 1;
break;
}
- if (is_dp)
+ if (is_dp) {
args.v2.acConfig.fCoherentMode = 1;
- else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+ args.v2.acConfig.fDPConnector = 1;
+ } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
if (dig->coherent_mode)
args.v2.acConfig.fCoherentMode = 1;
if (radeon_encoder->pixel_clock > 165000)
} else {
args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
- if (dig->dig_encoder)
+ if (dig_encoder)
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
else
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
if (is_dig) {
switch (mode) {
case DRM_MODE_DPMS_ON:
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+ /* some early dce3.2 boards have a bug in their transmitter control table */
+ if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+ else
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
}
if (ext_encoder) {
- int action;
-
switch (mode) {
case DRM_MODE_DPMS_ON:
default:
- if (ASIC_IS_DCE41(rdev))
- action = EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT;
- else
- action = ATOM_ENABLE;
+ if (ASIC_IS_DCE41(rdev)) {
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT);
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF);
+ } else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
- if (ASIC_IS_DCE41(rdev))
- action = EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT;
- else
- action = ATOM_DISABLE;
+ if (ASIC_IS_DCE41(rdev)) {
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING);
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT);
+ } else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE);
break;
}
- atombios_external_encoder_setup(encoder, ext_encoder, action);
}
radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
return connector_status_disconnected;
}
+static enum drm_connector_status
+radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
+ u32 bios_0_scratch;
+
+ if (!ASIC_IS_DCE4(rdev))
+ return connector_status_unknown;
+
+ if (!ext_encoder)
+ return connector_status_unknown;
+
+ if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0)
+ return connector_status_unknown;
+
+ /* load detect on the dp bridge */
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION);
+
+ bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+
+ DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+ if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+ return connector_status_connected; /* CTV */
+ else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+ return connector_status_connected; /* STV */
+ }
+ return connector_status_disconnected;
+}
+
+void
+radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder)
+{
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
+
+ if (ext_encoder)
+ /* ddc_setup on the dp bridge */
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP);
+
+}
+
static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
.mode_set = radeon_atom_encoder_mode_set,
.commit = radeon_atom_encoder_commit,
.disable = radeon_atom_encoder_disable,
- /* no detect for TMDS/LVDS yet */
+ .detect = radeon_atom_dig_detect,
};
static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
CHIP_CYPRESS,
CHIP_HEMLOCK,
CHIP_PALM,
+ CHIP_SUMO,
+ CHIP_SUMO2,
CHIP_BARTS,
CHIP_TURKS,
CHIP_CAICOS,
#include "radeon.h"
#include "radeon_trace.h"
+static void radeon_fence_write(struct radeon_device *rdev, u32 seq)
+{
+ if (rdev->wb.enabled) {
+ u32 scratch_index;
+ if (rdev->wb.use_event)
+ scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ else
+ scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);;
+ } else
+ WREG32(rdev->fence_drv.scratch_reg, seq);
+}
+
+static u32 radeon_fence_read(struct radeon_device *rdev)
+{
+ u32 seq;
+
+ if (rdev->wb.enabled) {
+ u32 scratch_index;
+ if (rdev->wb.use_event)
+ scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ else
+ scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]);
+ } else
+ seq = RREG32(rdev->fence_drv.scratch_reg);
+ return seq;
+}
+
int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence)
{
unsigned long irq_flags;
return 0;
}
fence->seq = atomic_add_return(1, &rdev->fence_drv.seq);
- if (!rdev->cp.ready) {
+ if (!rdev->cp.ready)
/* FIXME: cp is not running assume everythings is done right
* away
*/
- WREG32(rdev->fence_drv.scratch_reg, fence->seq);
- } else
+ radeon_fence_write(rdev, fence->seq);
+ else
radeon_fence_ring_emit(rdev, fence);
trace_radeon_fence_emit(rdev->ddev, fence->seq);
bool wake = false;
unsigned long cjiffies;
- if (rdev->wb.enabled) {
- u32 scratch_index;
- if (rdev->wb.use_event)
- scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- else
- scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]);
- } else
- seq = RREG32(rdev->fence_drv.scratch_reg);
+ seq = radeon_fence_read(rdev);
if (seq != rdev->fence_drv.last_seq) {
rdev->fence_drv.last_seq = seq;
rdev->fence_drv.last_jiffies = jiffies;
r = radeon_gpu_reset(rdev);
if (r)
return r;
- WREG32(rdev->fence_drv.scratch_reg, fence->seq);
+ radeon_fence_write(rdev, fence->seq);
rdev->gpu_lockup = false;
}
timeout = RADEON_FENCE_JIFFIES_TIMEOUT;
write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
return r;
}
- WREG32(rdev->fence_drv.scratch_reg, 0);
+ radeon_fence_write(rdev, 0);
atomic_set(&rdev->fence_drv.seq, 0);
INIT_LIST_HEAD(&rdev->fence_drv.created);
INIT_LIST_HEAD(&rdev->fence_drv.emited);
struct radeon_fence *fence;
seq_printf(m, "Last signaled fence 0x%08X\n",
- RREG32(rdev->fence_drv.scratch_reg));
+ radeon_fence_read(rdev));
if (!list_empty(&rdev->fence_drv.emited)) {
fence = list_entry(rdev->fence_drv.emited.prev,
struct radeon_fence, list);
extern void atombios_dig_transmitter_setup(struct drm_encoder *encoder,
int action, uint8_t lane_num,
uint8_t lane_set);
+extern void radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder);
+extern struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder);
extern int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
u8 write_byte, u8 *read_byte);
case THERMAL_TYPE_RV6XX:
case THERMAL_TYPE_RV770:
case THERMAL_TYPE_EVERGREEN:
+ case THERMAL_TYPE_NI:
case THERMAL_TYPE_SUMO:
rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
if (IS_ERR(rdev->pm.int_hwmon_dev)) {
0x00009714 VC_ENHANCE
0x00009830 DB_DEBUG
0x00009838 DB_WATERMARKS
-0x00028D28 DB_SRESULTS_COMPARE_STATE0
0x00028D44 DB_ALPHA_TO_MASK
0x00009700 VC_CNTL
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->voltage == 0xff01)
+ return;
if (voltage->voltage != rdev->pm.current_vddc) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE,
_DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING,
&dev_priv->aperture);
- if (ret)
- return ret;
-
return ret;
}
- 3M PCT touch screens
- ActionStar dual touch panels
- Cando dual touch panels
+ - Chunghwa panels
- CVTouch panels
- Cypress TrueTouch panels
- Elo TouchSystems IntelliTouch Plus panels
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
#define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d
#define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618
+#define USB_VENDOR_ID_CHUNGHWAT 0x2247
+#define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001
+
#define USB_VENDOR_ID_CIDC 0x1677
#define USB_VENDOR_ID_CMEDIA 0x0d8c
#define USB_VENDOR_ID_UCLOGIC 0x5543
#define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042
#define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5 0x6001
+#define USB_DEVICE_ID_UCLOGIC_TABLET_TWA60 0x0064
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005
}
report->size = 6;
- /*
- * The device reponds with 'invalid report id' when feature
- * report switching it into multitouch mode is sent to it.
- *
- * This results in -EIO from the _raw low-level transport callback,
- * but there seems to be no other way of switching the mode.
- * Thus the super-ugly hacky success check below.
- */
ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
HID_FEATURE_REPORT);
- if (ret != -EIO) {
+ if (ret != sizeof(feature)) {
hid_err(hdev, "unable to request touch data (%d)\n", ret);
goto err_stop_hw;
}
struct mt_class *mtclass; /* our mt device class */
unsigned last_field_index; /* last field index of the report */
unsigned last_slot_field; /* the last field of a slot */
+ int last_mt_collection; /* last known mt-related collection */
__s8 inputmode; /* InputMode HID feature, -1 if non-existent */
__u8 num_received; /* how many contacts we received */
__u8 num_expected; /* expected last contact index */
cls->sn_move);
/* touchscreen emulation */
set_abs(hi->input, ABS_X, field, cls->sn_move);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_GD_Y:
if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
cls->sn_move);
/* touchscreen emulation */
set_abs(hi->input, ABS_Y, field, cls->sn_move);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_INRANGE:
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_CONFIDENCE:
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_TIPSWITCH:
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_CONTACTID:
input_mt_init_slots(hi->input, td->maxcontacts);
td->last_slot_field = usage->hid;
td->last_field_index = field->index;
+ td->last_mt_collection = usage->collection_index;
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR);
set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field,
cls->sn_width);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max,
cls->sn_height);
input_set_abs_params(hi->input,
ABS_MT_ORIENTATION, 0, 1, 0, 0);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_TIPPRESSURE:
if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
/* touchscreen emulation */
set_abs(hi->input, ABS_PRESSURE, field,
cls->sn_pressure);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_CONTACTCOUNT:
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index)
+ td->last_field_index = field->index;
return 1;
case HID_DG_CONTACTMAX:
/* we don't set td->last_slot_field as contactcount and
* contact max are global to the report */
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index)
+ td->last_field_index = field->index;
return -1;
}
/* let hid-input decide for the others */
}
td->mtclass = mtclass;
td->inputmode = -1;
+ td->last_mt_collection = -1;
hid_set_drvdata(hdev, td);
ret = hid_parse(hdev);
HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
+ /* Chunghwa Telecom touch panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT,
+ USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
+
/* CVTouch panels */
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT },
usbhid_close(list->hiddev->hid);
usbhid_put_power(list->hiddev->hid);
} else {
+ mutex_unlock(&list->hiddev->existancelock);
kfree(list->hiddev);
+ kfree(list);
+ return 0;
}
}
- kfree(list);
mutex_unlock(&list->hiddev->existancelock);
+ kfree(list);
return 0;
}
usb_deregister_dev(usbhid->intf, &hiddev_class);
if (hiddev->open) {
+ mutex_unlock(&hiddev->existancelock);
usbhid_close(hiddev->hid);
wake_up_interruptible(&hiddev->wait);
} else {
+ mutex_unlock(&hiddev->existancelock);
kfree(hiddev);
}
- mutex_unlock(&hiddev->existancelock);
}
static void atk_init_attribute(struct device_attribute *attr, char *name,
sysfs_show_func show)
{
+ sysfs_attr_init(&attr->attr);
attr->attr.name = name;
attr->attr.mode = 0444;
attr->show = show;
int err;
list_for_each_entry(s, &data->sensor_list, list) {
- sysfs_attr_init(&s->input_attr.attr);
err = device_create_file(data->hwmon_dev, &s->input_attr);
if (err)
return err;
- sysfs_attr_init(&s->label_attr.attr);
err = device_create_file(data->hwmon_dev, &s->label_attr);
if (err)
return err;
- sysfs_attr_init(&s->limit1_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit1_attr);
if (err)
return err;
- sysfs_attr_init(&s->limit2_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit2_attr);
if (err)
return err;
struct pdev_entry {
struct list_head list;
struct platform_device *pdev;
- unsigned int cpu;
u16 phys_proc_id;
- u16 cpu_core_id;
};
static LIST_HEAD(pdev_list);
}
pdev_entry->pdev = pdev;
- pdev_entry->cpu = cpu;
pdev_entry->phys_proc_id = TO_PHYS_ID(cpu);
- pdev_entry->cpu_core_id = TO_CORE_ID(cpu);
list_add_tail(&pdev_entry->list, &pdev_list);
mutex_unlock(&pdev_list_mutex);
/* Set up read-only sensors */
while (ro->label) {
+ sysfs_attr_init(&sensors->dev_attr.attr);
sensors->dev_attr.attr.name = ro->label;
sensors->dev_attr.attr.mode = S_IRUGO;
sensors->dev_attr.show = ro->show;
/* Set up read-write sensors */
while (rw->label) {
+ sysfs_attr_init(&sensors->dev_attr.attr);
sensors->dev_attr.attr.name = rw->label;
sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
sensors->dev_attr.show = rw->show;
else if (type == POWER_SENSOR)
sprintf(n, power_sensor_name_templates[func], "power", counter);
+ sysfs_attr_init(&data->sensors[sensor].attr[func].dev_attr.attr);
data->sensors[sensor].attr[func].dev_attr.attr.name = n;
data->sensors[sensor].attr[func].dev_attr.attr.mode = S_IRUGO;
data->sensors[sensor].attr[func].dev_attr.show = ibmpex_show_sensor;
attr = &attrs->in;
attr->index = channel;
+ sysfs_attr_init(&attr->dev_attr.attr);
attr->dev_attr.attr.name = attrs->in_name;
attr->dev_attr.attr.mode = S_IRUGO;
attr->dev_attr.show = s3c_hwmon_ch_show;
attr = &attrs->label;
attr->index = channel;
+ sysfs_attr_init(&attr->dev_attr.attr);
attr->dev_attr.attr.name = attrs->label_name;
attr->dev_attr.attr.mode = S_IRUGO;
attr->dev_attr.show = s3c_hwmon_label_show;
sector_t block)
{
struct ide_cmd cmd;
- int uptodate = 0, nsectors;
+ int uptodate = 0;
+ unsigned int nsectors;
ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu",
rq->cmd[0], (unsigned long long)block);
rcu_read_unlock();
- wake_up_interruptible(&evdev->wait);
+ if (type == EV_SYN && code == SYN_REPORT)
+ wake_up_interruptible(&evdev->wait);
}
static int evdev_fasync(int fd, struct file *file, int on)
} else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) {
mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum -
dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1,
- clamp(mt_slots, 2, 32);
+ mt_slots = clamp(mt_slots, 2, 32);
} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
mt_slots = 2;
} else {
#endif
}
}
+ input_sync(omap_kp_data->input);
memcpy(keypad_state, new_state, sizeof(keypad_state));
if (key_down) {
[SH_KEYSC_MODE_3] = { 2, 4, 7 },
[SH_KEYSC_MODE_4] = { 3, 6, 6 },
[SH_KEYSC_MODE_5] = { 4, 6, 7 },
- [SH_KEYSC_MODE_6] = { 5, 7, 7 },
+ [SH_KEYSC_MODE_6] = { 5, 8, 8 },
};
struct sh_keysc_priv {
if (size == 0)
size = xres ? : 1;
- clamp(value, min, max);
+ value = clamp(value, min, max);
mousedev->packet.x = ((value - min) * xres) / size;
mousedev->packet.abs_event = 1;
if (size == 0)
size = yres ? : 1;
- clamp(value, min, max);
+ value = clamp(value, min, max);
mousedev->packet.y = yres - ((value - min) * yres) / size;
mousedev->packet.abs_event = 1;
if (!cs || !try_module_get(cs->driver->owner))
return -ENODEV;
- if (mutex_lock_interruptible(&cs->mutex))
+ if (mutex_lock_interruptible(&cs->mutex)) {
+ module_put(cs->driver->owner);
return -ERESTARTSYS;
+ }
tty->driver_data = cs;
++cs->open_count;
_queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY,
sizeof(struct ph_info_dch) + dch->dev.nrbchan *
sizeof(struct ph_info_ch), phi, GFP_ATOMIC);
+ kfree(phi);
}
/*
+config LEDS_GPIO_REGISTER
+ bool
+ help
+ This option provides the function gpio_led_register_device.
+ As this function is used by arch code it must not be compiled as a
+ module.
+
menuconfig NEW_LEDS
bool "LED Support"
help
This is not related to standard keyboard LEDs which are controlled
via the input system.
+if NEW_LEDS
+
config LEDS_CLASS
bool "LED Class Support"
- depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-config LEDS_GPIO_REGISTER
- bool
- help
- This option provides the function gpio_led_register_device.
- As this function is used by arch code it must not be compiled as a
- module.
-
-if NEW_LEDS
-
comment "LED drivers"
config LEDS_88PM860X
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
+ depends on LEDS_CLASS
depends on MFD_ASIC3
default y
help
kunmap_atomic(sb, KM_USER0);
}
+/*
+ * bitmap_new_disk_sb
+ * @bitmap
+ *
+ * This function is somewhat the reverse of bitmap_read_sb. bitmap_read_sb
+ * reads and verifies the on-disk bitmap superblock and populates bitmap_info.
+ * This function verifies 'bitmap_info' and populates the on-disk bitmap
+ * structure, which is to be written to disk.
+ *
+ * Returns: 0 on success, -Exxx on error
+ */
+static int bitmap_new_disk_sb(struct bitmap *bitmap)
+{
+ bitmap_super_t *sb;
+ unsigned long chunksize, daemon_sleep, write_behind;
+ int err = -EINVAL;
+
+ bitmap->sb_page = alloc_page(GFP_KERNEL);
+ if (IS_ERR(bitmap->sb_page)) {
+ err = PTR_ERR(bitmap->sb_page);
+ bitmap->sb_page = NULL;
+ return err;
+ }
+ bitmap->sb_page->index = 0;
+
+ sb = kmap_atomic(bitmap->sb_page, KM_USER0);
+
+ sb->magic = cpu_to_le32(BITMAP_MAGIC);
+ sb->version = cpu_to_le32(BITMAP_MAJOR_HI);
+
+ chunksize = bitmap->mddev->bitmap_info.chunksize;
+ BUG_ON(!chunksize);
+ if (!is_power_of_2(chunksize)) {
+ kunmap_atomic(sb, KM_USER0);
+ printk(KERN_ERR "bitmap chunksize not a power of 2\n");
+ return -EINVAL;
+ }
+ sb->chunksize = cpu_to_le32(chunksize);
+
+ daemon_sleep = bitmap->mddev->bitmap_info.daemon_sleep;
+ if (!daemon_sleep ||
+ (daemon_sleep < 1) || (daemon_sleep > MAX_SCHEDULE_TIMEOUT)) {
+ printk(KERN_INFO "Choosing daemon_sleep default (5 sec)\n");
+ daemon_sleep = 5 * HZ;
+ }
+ sb->daemon_sleep = cpu_to_le32(daemon_sleep);
+ bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep;
+
+ /*
+ * FIXME: write_behind for RAID1. If not specified, what
+ * is a good choice? We choose COUNTER_MAX / 2 arbitrarily.
+ */
+ write_behind = bitmap->mddev->bitmap_info.max_write_behind;
+ if (write_behind > COUNTER_MAX)
+ write_behind = COUNTER_MAX / 2;
+ sb->write_behind = cpu_to_le32(write_behind);
+ bitmap->mddev->bitmap_info.max_write_behind = write_behind;
+
+ /* keep the array size field of the bitmap superblock up to date */
+ sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);
+
+ memcpy(sb->uuid, bitmap->mddev->uuid, 16);
+
+ bitmap->flags |= BITMAP_STALE;
+ sb->state |= cpu_to_le32(BITMAP_STALE);
+ bitmap->events_cleared = bitmap->mddev->events;
+ sb->events_cleared = cpu_to_le64(bitmap->mddev->events);
+
+ bitmap->flags |= BITMAP_HOSTENDIAN;
+ sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN);
+
+ kunmap_atomic(sb, KM_USER0);
+
+ return 0;
+}
+
/* read the superblock from the bitmap file and initialize some bitmap fields */
static int bitmap_read_sb(struct bitmap *bitmap)
{
reason = "unrecognized superblock version";
else if (chunksize < 512)
reason = "bitmap chunksize too small";
- else if ((1 << ffz(~chunksize)) != chunksize)
+ else if (!is_power_of_2(chunksize))
reason = "bitmap chunksize not a power of 2";
else if (daemon_sleep < 1 || daemon_sleep > MAX_SCHEDULE_TIMEOUT)
reason = "daemon sleep period out of range";
}
printk(KERN_INFO "%s: bitmap initialized from disk: "
- "read %lu/%lu pages, set %lu bits\n",
- bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt);
+ "read %lu/%lu pages, set %lu of %lu bits\n",
+ bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt, chunks);
return 0;
return 0;
}
- if (unlikely((*bmc & COUNTER_MAX) == COUNTER_MAX)) {
+ if (unlikely(COUNTER(*bmc) == COUNTER_MAX)) {
DEFINE_WAIT(__wait);
/* note that it is safe to do the prepare_to_wait
* after the test as long as we do it before dropping
sysfs_notify_dirent_safe(bitmap->sysfs_can_clear);
}
- if (!success && ! (*bmc & NEEDED_MASK))
+ if (!success && !NEEDED(*bmc))
*bmc |= NEEDED_MASK;
- if ((*bmc & COUNTER_MAX) == COUNTER_MAX)
+ if (COUNTER(*bmc) == COUNTER_MAX)
wake_up(&bitmap->overflow_wait);
(*bmc)--;
vfs_fsync(file, 1);
}
/* read superblock from bitmap file (this sets mddev->bitmap_info.chunksize) */
- if (!mddev->bitmap_info.external)
- err = bitmap_read_sb(bitmap);
- else {
+ if (!mddev->bitmap_info.external) {
+ /*
+ * If 'MD_ARRAY_FIRST_USE' is set, then device-mapper is
+ * instructing us to create a new on-disk bitmap instance.
+ */
+ if (test_and_clear_bit(MD_ARRAY_FIRST_USE, &mddev->flags))
+ err = bitmap_new_disk_sb(bitmap);
+ else
+ err = bitmap_read_sb(bitmap);
+ } else {
err = 0;
if (mddev->bitmap_info.chunksize == 0 ||
mddev->bitmap_info.daemon_sleep == 0)
bitmap->chunks = chunks;
bitmap->pages = pages;
bitmap->missing_pages = pages;
- bitmap->counter_bits = COUNTER_BITS;
-
- bitmap->syncchunk = ~0UL;
#ifdef INJECT_FATAL_FAULT_1
bitmap->bp = NULL;
typedef __u16 bitmap_counter_t;
#define COUNTER_BITS 16
#define COUNTER_BIT_SHIFT 4
-#define COUNTER_BYTE_RATIO (COUNTER_BITS / 8)
#define COUNTER_BYTE_SHIFT (COUNTER_BIT_SHIFT - 3)
#define NEEDED_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 1)))
mddev_t *mddev; /* the md device that the bitmap is for */
- int counter_bits; /* how many bits per block counter */
-
/* bitmap chunksize -- how much data does each bit represent? */
unsigned long chunkshift; /* chunksize = 2^chunkshift (for bitops) */
unsigned long chunks; /* total number of data chunks for the array */
- /* We hold a count on the chunk currently being synced, and drop
- * it when the last block is started. If the resync is aborted
- * midway, we need to be able to drop that count, so we remember
- * the counted chunk..
- */
- unsigned long syncchunk;
-
__u64 events_cleared;
int need_sync;
mddev->suspended = 0;
wake_up(&mddev->sb_wait);
mddev->pers->quiesce(mddev, 0);
+
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
}
EXPORT_SYMBOL_GPL(mddev_resume);
},
};
+static void sync_super(mddev_t *mddev, mdk_rdev_t *rdev)
+{
+ if (mddev->sync_super) {
+ mddev->sync_super(mddev, rdev);
+ return;
+ }
+
+ BUG_ON(mddev->major_version >= ARRAY_SIZE(super_types));
+
+ super_types[mddev->major_version].sync_super(mddev, rdev);
+}
+
static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2)
{
mdk_rdev_t *rdev, *rdev2;
if (list_empty(&mddev->disks))
return 0; /* nothing to do */
- if (blk_get_integrity(mddev->gendisk))
- return 0; /* already registered */
+ if (!mddev->gendisk || blk_get_integrity(mddev->gendisk))
+ return 0; /* shouldn't register, or already is */
list_for_each_entry(rdev, &mddev->disks, same_set) {
/* skip spares and non-functional disks */
if (test_bit(Faulty, &rdev->flags))
/* Don't update this superblock */
rdev->sb_loaded = 2;
} else {
- super_types[mddev->major_version].
- sync_super(mddev, rdev);
+ sync_super(mddev, rdev);
rdev->sb_loaded = 1;
}
}
if (rdev->raid_disk == -1)
return -EEXIST;
/* personality does all needed checks */
- if (rdev->mddev->pers->hot_add_disk == NULL)
+ if (rdev->mddev->pers->hot_remove_disk == NULL)
return -EINVAL;
err = rdev->mddev->pers->
hot_remove_disk(rdev->mddev, rdev->raid_disk);
if (mddev->flags)
md_update_sb(mddev, 0);
- md_wakeup_thread(mddev->thread);
- md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
-
md_new_event(mddev);
sysfs_notify_dirent_safe(mddev->sysfs_state);
sysfs_notify_dirent_safe(mddev->sysfs_action);
bitmap_destroy(mddev);
goto out;
}
+
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
+
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
mddev->changed = 1;
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ if (!err)
+ md_new_event(mddev);
md_wakeup_thread(mddev->thread);
return err;
}
* Tune reconstruction:
*/
window = 32*(PAGE_SIZE/512);
- printk(KERN_INFO "md: using %dk window, over a total of %llu blocks.\n",
- window/2,(unsigned long long) max_sectors/2);
+ printk(KERN_INFO "md: using %dk window, over a total of %lluk.\n",
+ window/2, (unsigned long long)max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
last_check = 0;
}
EXPORT_SYMBOL_GPL(md_do_sync);
-
static int remove_and_add_spares(mddev_t *mddev)
{
mdk_rdev_t *rdev;
*/
void md_check_recovery(mddev_t *mddev)
{
+ if (mddev->suspended)
+ return;
+
if (mddev->bitmap)
bitmap_daemon_work(mddev);
#define MD_CHANGE_DEVS 0 /* Some device status has changed */
#define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */
#define MD_CHANGE_PENDING 2 /* switch from 'clean' to 'active' in progress */
+#define MD_ARRAY_FIRST_USE 3 /* First use of array, needs initialization */
int suspended;
atomic_t active_io;
atomic_t flush_pending;
struct work_struct flush_work;
struct work_struct event_work; /* used by dm to report failure event */
+ void (*sync_super)(mddev_t *mddev, mdk_rdev_t *rdev);
};
return best_disk;
}
-static int raid1_congested(void *data, int bits)
+int md_raid1_congested(mddev_t *mddev, int bits)
{
- mddev_t *mddev = data;
conf_t *conf = mddev->private;
int i, ret = 0;
- if (mddev_congested(mddev, bits))
- return 1;
-
rcu_read_lock();
for (i = 0; i < mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags)) {
struct request_queue *q = bdev_get_queue(rdev->bdev);
+ BUG_ON(!q);
+
/* Note the '|| 1' - when read_balance prefers
* non-congested targets, it can be removed
*/
rcu_read_unlock();
return ret;
}
+EXPORT_SYMBOL_GPL(md_raid1_congested);
+static int raid1_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+
+ return mddev_congested(mddev, bits) ||
+ md_raid1_congested(mddev, bits);
+}
static void flush_pending_writes(conf_t *conf)
{
return PTR_ERR(conf);
list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (!mddev->gendisk)
+ continue;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
md_set_array_sectors(mddev, raid1_size(mddev, 0, 0));
- mddev->queue->backing_dev_info.congested_fn = raid1_congested;
- mddev->queue->backing_dev_info.congested_data = mddev;
+ if (mddev->queue) {
+ mddev->queue->backing_dev_info.congested_fn = raid1_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
+ }
return md_integrity_register(mddev);
}
*/
#define R1BIO_Returned 6
+extern int md_raid1_congested(mddev_t *mddev, int bits);
+
#endif
static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
{
- bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16);
+ bio->bi_phys_segments = raid5_bi_phys_segments(bio) | (cnt << 16);
}
/* Find first data disk in a raid6 stripe */
bi = &sh->dev[i].req;
bi->bi_rw = rw;
- if (rw == WRITE)
+ if (rw & WRITE)
bi->bi_end_io = raid5_end_write_request;
else
bi->bi_end_io = raid5_end_read_request;
bi->bi_io_vec[0].bv_offset = 0;
bi->bi_size = STRIPE_SIZE;
bi->bi_next = NULL;
- if (rw == WRITE &&
+ if ((rw & WRITE) &&
test_bit(R5_ReWrite, &sh->dev[i].flags))
atomic_add(STRIPE_SECTORS,
&rdev->corrected_errors);
generic_make_request(bi);
} else {
- if (rw == WRITE)
+ if (rw & WRITE)
set_bit(STRIPE_DEGRADED, &sh->state);
pr_debug("skip op %ld on disc %d for sector %llu\n",
bi->bi_rw, i, (unsigned long long)sh->sector);
init_async_submit(&submit, flags, tx, NULL, NULL, NULL);
bio_for_each_segment(bvl, bio, i) {
- int len = bio_iovec_idx(bio, i)->bv_len;
+ int len = bvl->bv_len;
int clen;
int b_offset = 0;
clen = len;
if (clen > 0) {
- b_offset += bio_iovec_idx(bio, i)->bv_offset;
- bio_page = bio_iovec_idx(bio, i)->bv_page;
+ b_offset += bvl->bv_offset;
+ bio_page = bvl->bv_page;
if (frombio)
tx = async_memcpy(page, bio_page, page_offset,
b_offset, clen, &submit);
printk(KERN_INFO "md/raid:%s: device %s operational as raid"
" disk %d\n",
mdname(mddev), bdevname(rdev->bdev, b), raid_disk);
- } else
+ } else if (rdev->saved_raid_disk != raid_disk)
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
int act_len, ret;
u8 buf[64];
- if (slen > sizeof(buf))
- slen = sizeof(buf);
memcpy(&buf[0], sbuf, slen);
buf[60] = state->seq++;
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0, inc, i = 0;
+ u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
while (i < num) {
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
- u8 buf[6];
+ if (msg[i].len > 2 || msg[i+1].len > 60) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
buf[0] = CMD_I2C_READ;
buf[1] = (msg[i].addr << 1) | 0x01;
buf[2] = msg[i].buf[0];
buf[3] = msg[i].buf[1];
buf[4] = msg[i].len-1;
buf[5] = msg[i+1].len;
- ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
+ ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
msg[i+1].len);
inc = 2;
} else {
- u8 buf[4+msg[i].len];
+ if (msg[i].len > 48) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
buf[0] = CMD_I2C_WRITE;
buf[1] = (msg[i].addr << 1);
buf[2] = msg[i].len;
buf[3] = 0x01;
memcpy(&buf[4], msg[i].buf, msg[i].len);
- ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+ ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
inc = 1;
}
if (ret)
/* Part 1: Find a free minor number */
mutex_lock(&media_devnode_lock);
- minor = find_next_zero_bit(media_devnode_nums, 0, MEDIA_NUM_DEVICES);
+ minor = find_next_zero_bit(media_devnode_nums, MEDIA_NUM_DEVICES, 0);
if (minor == MEDIA_NUM_DEVICES) {
mutex_unlock(&media_devnode_lock);
printk(KERN_ERR "could not get a free minor\n");
return -ENFILE;
}
- set_bit(mdev->minor, media_devnode_nums);
+ set_bit(minor, media_devnode_nums);
mutex_unlock(&media_devnode_lock);
mdev->minor = minor;
#include <linux/delay.h>
#include <media/cx25840.h>
#include <linux/firmware.h>
-#include <staging/altera.h>
+#include "../../../staging/altera-stapl/altera.h"
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-init.h"
+++ /dev/null
-/*
- * Auto gain algorithm for camera's with a coarse exposure control
- *
- * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* Autogain + exposure algorithm for cameras with a coarse exposure control
- (usually this means we can only control the clockdiv to change exposure)
- As changing the clockdiv so that the fps drops from 30 to 15 fps for
- example, will lead to a huge exposure change (it effectively doubles),
- this algorithm normally tries to only adjust the gain (between 40 and
- 80 %) and if that does not help, only then changes exposure. This leads
- to a much more stable image then using the knee algorithm which at
- certain points of the knee graph will only try to adjust exposure,
- which leads to oscilating as one exposure step is huge.
-
- Note this assumes that the sd struct for the cam in question has
- exp_too_high_cnt and exp_too_high_cnt int members for use by this function.
-
- Returns 0 if no changes were made, 1 if the gain and or exposure settings
- where changed. */
-static int gspca_coarse_grained_expo_autogain(struct gspca_dev *gspca_dev,
- int avg_lum, int desired_avg_lum, int deadzone)
-{
- int i, steps, gain, orig_gain, exposure, orig_exposure;
- int gain_low, gain_high;
- const struct ctrl *gain_ctrl = NULL;
- const struct ctrl *exposure_ctrl = NULL;
- struct sd *sd = (struct sd *) gspca_dev;
- int retval = 0;
-
- for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
- if (gspca_dev->ctrl_dis & (1 << i))
- continue;
- if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_GAIN)
- gain_ctrl = &gspca_dev->sd_desc->ctrls[i];
- if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_EXPOSURE)
- exposure_ctrl = &gspca_dev->sd_desc->ctrls[i];
- }
- if (!gain_ctrl || !exposure_ctrl) {
- PDEBUG(D_ERR, "Error: gspca_coarse_grained_expo_autogain "
- "called on cam without gain or exposure");
- return 0;
- }
-
- if (gain_ctrl->get(gspca_dev, &gain) ||
- exposure_ctrl->get(gspca_dev, &exposure))
- return 0;
-
- orig_gain = gain;
- orig_exposure = exposure;
- gain_low =
- (gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 2;
- gain_low += gain_ctrl->qctrl.minimum;
- gain_high =
- (gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 4;
- gain_high += gain_ctrl->qctrl.minimum;
-
- /* If we are of a multiple of deadzone, do multiple steps to reach the
- desired lumination fast (with the risc of a slight overshoot) */
- steps = (desired_avg_lum - avg_lum) / deadzone;
-
- PDEBUG(D_FRAM, "autogain: lum: %d, desired: %d, steps: %d",
- avg_lum, desired_avg_lum, steps);
-
- if ((gain + steps) > gain_high &&
- sd->exposure < exposure_ctrl->qctrl.maximum) {
- gain = gain_high;
- sd->exp_too_low_cnt++;
- } else if ((gain + steps) < gain_low &&
- sd->exposure > exposure_ctrl->qctrl.minimum) {
- gain = gain_low;
- sd->exp_too_high_cnt++;
- } else {
- gain += steps;
- if (gain > gain_ctrl->qctrl.maximum)
- gain = gain_ctrl->qctrl.maximum;
- else if (gain < gain_ctrl->qctrl.minimum)
- gain = gain_ctrl->qctrl.minimum;
- sd->exp_too_high_cnt = 0;
- sd->exp_too_low_cnt = 0;
- }
-
- if (sd->exp_too_high_cnt > 3) {
- exposure--;
- sd->exp_too_high_cnt = 0;
- } else if (sd->exp_too_low_cnt > 3) {
- exposure++;
- sd->exp_too_low_cnt = 0;
- }
-
- if (gain != orig_gain) {
- gain_ctrl->set(gspca_dev, gain);
- retval = 1;
- }
- if (exposure != orig_exposure) {
- exposure_ctrl->set(gspca_dev, exposure);
- retval = 1;
- }
-
- return retval;
-}
* buffers, there are some pretty strict real time constraints for
* isochronous transfer for larger frame sizes).
*/
-/*jfm: this value works well for 1600x1200, but not 800x600 - see isoc_init */
+/*jfm: this value does not work for 800x600 - see isoc_init */
#define OVFX2_BULK_SIZE (13 * 4096)
/* I2C registers */
gspca_dev->cam.ctrls = sd->ctrls;
sd->quality = QUALITY_DEF;
+ sd->frame_rate = 15;
return 0;
}
ARRAY_SIZE(init_519_ov7660));
write_i2c_regvals(sd, norm_7660, ARRAY_SIZE(norm_7660));
sd->gspca_dev.curr_mode = 1; /* 640x480 */
- sd->frame_rate = 15;
ov519_set_mode(sd);
ov519_set_fr(sd);
sd->ctrls[COLORS].max = 4; /* 0..4 */
switch (sd->bridge) {
case BRIDGE_OVFX2:
- if (gspca_dev->width == 1600)
+ if (gspca_dev->width != 800)
gspca_dev->cam.bulk_size = OVFX2_BULK_SIZE;
else
gspca_dev->cam.bulk_size = 7 * 4096;
gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
/* A short read signals EOF */
- if (len < OVFX2_BULK_SIZE) {
+ if (len < gspca_dev->cam.bulk_size) {
/* If the frame is short, and it is one of the first ones
the sensor and bridge are still syncing, so drop it. */
if (sd->first_frame) {
u32 pktsz; /* (used by pkt_scan) */
u16 npkt;
- u8 nchg;
+ s8 nchg;
s8 short_mark;
u8 quality; /* image quality */
#define HDCS_SLEEP_MODE (1 << 1)
#define HDCS_DEFAULT_EXPOSURE 48
-#define HDCS_DEFAULT_GAIN 128
+#define HDCS_DEFAULT_GAIN 50
static int hdcs_probe_1x00(struct sd *sd);
static int hdcs_probe_1020(struct sd *sd);
if (!itv->has_cx23415)
write_reg_sync(0x03, IVTV_REG_DMACONTROL);
+ ivtv_s_std_enc(itv, &itv->tuner_std);
+
/* Default interrupts enabled. For the PVR350 this includes the
decoder VSYNC interrupt, which is always on. It is not only used
during decoding but also by the OSD.
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
ivtv_set_osd_alpha(itv);
- }
- else
+ ivtv_s_std_dec(itv, &itv->tuner_std);
+ } else {
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
-
- /* For cards with video out, this call needs interrupts enabled */
- ivtv_s_std(NULL, &fh, &itv->tuner_std);
+ }
/* Setup initial controls */
cx2341x_handler_setup(&itv->cxhdl);
{
int rc = 0;
v4l2_std_id std;
- struct ivtv_open_id fh;
- fh.itv = itv;
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
/* Display test image during restart */
/* Allow settings to reload */
ivtv_mailbox_cache_invalidate(itv);
- /* Restore video standard */
+ /* Restore encoder video standard */
std = itv->std;
itv->std = 0;
- ivtv_s_std(NULL, &fh, &std);
+ ivtv_s_std_enc(itv, &std);
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
ivtv_init_mpeg_decoder(itv);
+ /* Restore decoder video standard */
+ std = itv->std_out;
+ itv->std_out = 0;
+ ivtv_s_std_dec(itv, &std);
+
/* Restore framebuffer if active */
if (itv->ivtvfb_restore)
itv->ivtvfb_restore(itv);
return 0;
}
-int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
+void ivtv_s_std_enc(struct ivtv *itv, v4l2_std_id *std)
{
- DEFINE_WAIT(wait);
- struct ivtv *itv = fh2id(fh)->itv;
- struct yuv_playback_info *yi = &itv->yuv_info;
- int f;
-
- if ((*std & V4L2_STD_ALL) == 0)
- return -EINVAL;
-
- if (*std == itv->std)
- return 0;
-
- if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ||
- atomic_read(&itv->capturing) > 0 ||
- atomic_read(&itv->decoding) > 0) {
- /* Switching standard would turn off the radio or mess
- with already running streams, prevent that by
- returning EBUSY. */
- return -EBUSY;
- }
-
itv->std = *std;
itv->is_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
itv->is_50hz = !itv->is_60hz;
if (itv->hw_flags & IVTV_HW_CX25840)
itv->vbi.sliced_decoder_line_size = itv->is_60hz ? 272 : 284;
- IVTV_DEBUG_INFO("Switching standard to %llx.\n", (unsigned long long)itv->std);
-
/* Tuner */
ivtv_call_all(itv, core, s_std, itv->std);
+}
- if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
- /* set display standard */
- itv->std_out = *std;
- itv->is_out_60hz = itv->is_60hz;
- itv->is_out_50hz = itv->is_50hz;
- ivtv_call_all(itv, video, s_std_output, itv->std_out);
-
- /*
- * The next firmware call is time sensitive. Time it to
- * avoid risk of a hard lock, by trying to ensure the call
- * happens within the first 100 lines of the top field.
- * Make 4 attempts to sync to the decoder before giving up.
- */
- for (f = 0; f < 4; f++) {
- prepare_to_wait(&itv->vsync_waitq, &wait,
- TASK_UNINTERRUPTIBLE);
- if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100)
- break;
- schedule_timeout(msecs_to_jiffies(25));
- }
- finish_wait(&itv->vsync_waitq, &wait);
-
- if (f == 4)
- IVTV_WARN("Mode change failed to sync to decoder\n");
-
- ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
- itv->main_rect.left = itv->main_rect.top = 0;
- itv->main_rect.width = 720;
- itv->main_rect.height = itv->cxhdl.height;
- ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
- 720, itv->main_rect.height, 0, 0);
- yi->main_rect = itv->main_rect;
- if (!itv->osd_info) {
- yi->osd_full_w = 720;
- yi->osd_full_h = itv->is_out_50hz ? 576 : 480;
- }
+void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id *std)
+{
+ struct yuv_playback_info *yi = &itv->yuv_info;
+ DEFINE_WAIT(wait);
+ int f;
+
+ /* set display standard */
+ itv->std_out = *std;
+ itv->is_out_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
+ itv->is_out_50hz = !itv->is_out_60hz;
+ ivtv_call_all(itv, video, s_std_output, itv->std_out);
+
+ /*
+ * The next firmware call is time sensitive. Time it to
+ * avoid risk of a hard lock, by trying to ensure the call
+ * happens within the first 100 lines of the top field.
+ * Make 4 attempts to sync to the decoder before giving up.
+ */
+ for (f = 0; f < 4; f++) {
+ prepare_to_wait(&itv->vsync_waitq, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100)
+ break;
+ schedule_timeout(msecs_to_jiffies(25));
}
+ finish_wait(&itv->vsync_waitq, &wait);
+
+ if (f == 4)
+ IVTV_WARN("Mode change failed to sync to decoder\n");
+
+ ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
+ itv->main_rect.left = 0;
+ itv->main_rect.top = 0;
+ itv->main_rect.width = 720;
+ itv->main_rect.height = itv->is_out_50hz ? 576 : 480;
+ ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
+ 720, itv->main_rect.height, 0, 0);
+ yi->main_rect = itv->main_rect;
+ if (!itv->osd_info) {
+ yi->osd_full_w = 720;
+ yi->osd_full_h = itv->is_out_50hz ? 576 : 480;
+ }
+}
+
+int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
+{
+ struct ivtv *itv = fh2id(fh)->itv;
+
+ if ((*std & V4L2_STD_ALL) == 0)
+ return -EINVAL;
+
+ if (*std == itv->std)
+ return 0;
+
+ if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ||
+ atomic_read(&itv->capturing) > 0 ||
+ atomic_read(&itv->decoding) > 0) {
+ /* Switching standard would mess with already running
+ streams, prevent that by returning EBUSY. */
+ return -EBUSY;
+ }
+
+ IVTV_DEBUG_INFO("Switching standard to %llx.\n",
+ (unsigned long long)itv->std);
+
+ ivtv_s_std_enc(itv, std);
+ if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
+ ivtv_s_std_dec(itv, std);
+
return 0;
}
void ivtv_set_osd_alpha(struct ivtv *itv);
int ivtv_set_speed(struct ivtv *itv, int speed);
void ivtv_set_funcs(struct video_device *vdev);
-int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std);
+void ivtv_s_std_enc(struct ivtv *itv, v4l2_std_id *std);
+void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id *std);
int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
int ivtv_s_input(struct file *file, void *fh, unsigned int inp);
long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1);
/* Avoid unpredictable PCI bus hang - disable video clocks */
v4l2_subdev_call(itv->sd_video, video, s_stream, 0);
- ivtv_msleep_timeout(300, 1);
+ ivtv_msleep_timeout(300, 0);
ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0);
v4l2_subdev_call(itv->sd_video, video, s_stream, 1);
}
}
/* Handle any pending interrupts */
- ivtv_msleep_timeout(100, 1);
+ ivtv_msleep_timeout(100, 0);
}
atomic_dec(&itv->capturing);
Turning this signal on and off can confuse certain
TVs. As far as I can tell there is no reason not to
transmit this signal. */
- if ((itv->std & V4L2_STD_625_50) && !enabled) {
+ if ((itv->std_out & V4L2_STD_625_50) && !enabled) {
enabled = 1;
mode = 0x08; /* 4x3 full format */
}
static int ivtvfb_set_display_window(struct ivtv *itv, struct v4l2_rect *ivtv_window)
{
- int osd_height_limit = itv->is_50hz ? 576 : 480;
+ int osd_height_limit = itv->is_out_50hz ? 576 : 480;
/* Only fail if resolution too high, otherwise fudge the start coords. */
if ((ivtv_window->height > osd_height_limit) || (ivtv_window->width > IVTV_OSD_MAX_WIDTH))
vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
FB_VBLANK_HAVE_VSYNC;
trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
- if (itv->is_50hz && trace > 312)
+ if (itv->is_out_50hz && trace > 312)
trace -= 312;
- else if (itv->is_60hz && trace > 262)
+ else if (itv->is_out_60hz && trace > 262)
trace -= 262;
if (trace == 1)
vblank.flags |= FB_VBLANK_VSYNCING;
IVTVFB_DEBUG_INFO("ivtvfb_check_var\n");
/* Set base references for mode calcs. */
- if (itv->is_50hz) {
+ if (itv->is_out_50hz) {
pixclock = 84316;
hlimit = 776;
vlimit = 591;
If the margins are too large, just center the screen
(enforcing margins causes too many problems) */
- if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1) {
+ if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1)
var->left_margin = 1 + ((IVTV_OSD_MAX_WIDTH - var->xres) / 2);
- }
- if (var->upper_margin + var->yres > (itv->is_50hz ? 577 : 481)) {
- var->upper_margin = 1 + (((itv->is_50hz ? 576 : 480) - var->yres) / 2);
- }
+
+ if (var->upper_margin + var->yres > (itv->is_out_50hz ? 577 : 481))
+ var->upper_margin = 1 + (((itv->is_out_50hz ? 576 : 480) -
+ var->yres) / 2);
/* Maintain overall 'size' for a constant refresh rate */
var->right_margin = hlimit - var->left_margin - var->xres;
u32 osd_pan_index;
struct ivtv *itv = (struct ivtv *) info->par;
- osd_pan_index = (var->xoffset + (var->yoffset * var->xres_virtual))*var->bits_per_pixel/8;
+ if (var->yoffset + info->var.yres > info->var.yres_virtual ||
+ var->xoffset + info->var.xres > info->var.xres_virtual)
+ return -EINVAL;
+
+ osd_pan_index = var->yoffset * info->fix.line_length
+ + var->xoffset * info->var.bits_per_pixel / 8;
write_reg(osd_pan_index, 0x02A0C);
/* Pass this info back the yuv handler */
/* Hardware coords start at 0, user coords start at 1. */
osd_left--;
- start_window.left = osd_left >= 0 ? osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2);
+ start_window.left = osd_left >= 0 ?
+ osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2);
oi->display_byte_stride =
start_window.width * oi->bytes_per_pixel;
/* Vertical size & position */
- max_height = itv->is_50hz ? 576 : 480;
+ max_height = itv->is_out_50hz ? 576 : 480;
if (osd_yres > max_height)
osd_yres = max_height;
- start_window.height = osd_yres ? osd_yres : itv->is_50hz ? 480 : 400;
+ start_window.height = osd_yres ?
+ osd_yres : itv->is_out_50hz ? 480 : 400;
/* Check vertical start (osd_upper). */
if (osd_upper + start_window.height > max_height + 1) {
};
int i;
- dev_dbg(isp->dev, "");
+ dev_dbg(isp->dev, "ISP IRQ: ");
for (i = 0; i < ARRAY_SIZE(name); i++) {
if ((1 << i) & irqstatus)
*/
static int soc_camera_video_start(struct soc_camera_device *icd)
{
- struct device_type *type = icd->vdev->dev.type;
+ const struct device_type *type = icd->vdev->dev.type;
int ret;
if (!icd->dev.parent)
struct uvc_entity *remote;
unsigned int i;
u8 remote_pad;
- int ret;
+ int ret = 0;
for (i = 0; i < entity->num_pads; ++i) {
struct media_entity *source;
return ret;
}
+#if defined(CONFIG_PM) || defined(CONFIG_PM_RUNTIME)
static int apds990x_chip_on(struct apds990x_chip *chip)
{
int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
apds990x_mode_on(chip);
return 0;
}
+#endif
static int apds990x_chip_off(struct apds990x_chip *chip)
{
timer_nr = t < max ? (int) t : -1;
} else {
/* check if the requested timer's available */
- if (test_bit(timer_nr, mfgpt->avail))
+ if (!test_bit(timer_nr, mfgpt->avail))
timer_nr = -1;
}
}
}
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
if (atomic_dec_return(&queued_msg->use_count) == 0) {
dev_kfree_skb(skb);
kfree(queued_msg);
}
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
-
return NETDEV_TX_OK;
}
err_iounmap_app:
iounmap(config->va_app_base);
err_kzalloc:
- kfree(config);
+ kfree(target);
err_rel_res:
release_mem_region(res1->start, resource_size(res1));
err_rel_res0:
else if (ret != -ENOSYS)
goto err_gpio_cd;
+ /*
+ * A gpio pin that will detect cards when inserted and removed
+ * will most likely want to trigger on the edges if it is
+ * 0 when ejected and 1 when inserted (or mutatis mutandis
+ * for the inverted case) so we request triggers on both
+ * edges.
+ */
ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
- mmci_cd_irq, 0,
- DRIVER_NAME " (cd)", host);
+ mmci_cd_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ DRIVER_NAME " (cd)", host);
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
int burstlen, ret;
/*
- * use burstlen of 64 in 4 bit mode (--> reg value 0)
- * use burstlen of 16 in 1 bit mode (--> reg value 16)
+ * use burstlen of 64 (16 words) in 4 bit mode (--> reg value 0)
+ * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16)
*/
if (ios->bus_width == MMC_BUS_WIDTH_4)
- burstlen = 64;
- else
burstlen = 16;
+ else
+ burstlen = 4;
if (mxcmci_use_dma(host) && burstlen != host->burstlen) {
host->burstlen = burstlen;
reg = regulator_get(host->dev, "vmmc_aux");
host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+ /* For eMMC do not power off when not in sleep state */
+ if (mmc_slot(host).no_regulator_off_init)
+ return 0;
/*
* UGLY HACK: workaround regulator framework bugs.
* When the bootloader leaves a supply active, it's
outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
outb_p(0x00, E33G_IDCFR);
msleep(1);
- free_irq(*irqp, el2_probe_interrupt);
+ free_irq(*irqp, &seen);
if (!seen)
continue;
continue;
if (retval < 0)
goto err_disable;
+ break;
} while (*++irqp);
if (*irqp == 0) {
#ifdef __arm__
static void write_rreg(u_long base, u_int reg, u_int val)
{
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"str%?h %0, [%2, #-4] @ NET_RDP"
:
static inline unsigned short read_rreg(u_long base_addr, u_int reg)
{
unsigned short v;
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"ldr%?h %0, [%2, #-4] @ NET_RDP"
: "=r" (v)
static inline void write_ireg(u_long base, u_int reg, u_int val)
{
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"str%?h %0, [%2, #8] @ NET_IDP"
:
static inline unsigned short read_ireg(u_long base_addr, u_int reg)
{
u_short v;
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NAT_RAP\n\t"
"ldr%?h %0, [%2, #8] @ NET_IDP\n\t"
: "=r" (v)
#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-static inline void
+static void
am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
{
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
- __asm__ __volatile__("str%?h %2, [%0], #4"
+ asm volatile("str%?h %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
}
while (length > 8) {
- unsigned int tmp, tmp2;
- __asm__ __volatile__(
- "ldm%?ia %1!, {%2, %3}\n\t"
+ register unsigned int tmp asm("r2"), tmp2 asm("r3");
+ asm volatile(
+ "ldm%?ia %0!, {%1, %2}"
+ : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
+ length -= 8;
+ asm volatile(
+ "str%?h %1, [%0], #4\n\t"
+ "mov%? %1, %1, lsr #16\n\t"
+ "str%?h %1, [%0], #4\n\t"
"str%?h %2, [%0], #4\n\t"
"mov%? %2, %2, lsr #16\n\t"
- "str%?h %2, [%0], #4\n\t"
- "str%?h %3, [%0], #4\n\t"
- "mov%? %3, %3, lsr #16\n\t"
- "str%?h %3, [%0], #4"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2)
- : "0" (offset), "1" (buf));
- length -= 8;
+ "str%?h %2, [%0], #4"
+ : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
}
while (length > 0) {
- __asm__ __volatile__("str%?h %2, [%0], #4"
+ asm volatile("str%?h %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
}
}
-static inline void
+static void
am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
{
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
unsigned int tmp;
- __asm__ __volatile__(
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
"str%?b %2, [%1], #1\n\t"
"mov%? %2, %2, lsr #8\n\t"
length -= 2;
}
while (length > 8) {
- unsigned int tmp, tmp2, tmp3;
- __asm__ __volatile__(
+ register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
+ "ldr%?h %4, [%0], #4\n\t"
"ldr%?h %3, [%0], #4\n\t"
- "orr%? %2, %2, %3, lsl #16\n\t"
- "ldr%?h %3, [%0], #4\n\t"
+ "orr%? %2, %2, %4, lsl #16\n\t"
"ldr%?h %4, [%0], #4\n\t"
"orr%? %3, %3, %4, lsl #16\n\t"
"stm%?ia %1!, {%2, %3}"
}
while (length > 0) {
unsigned int tmp;
- __asm__ __volatile__(
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
"str%?b %2, [%1], #1\n\t"
"mov%? %2, %2, lsr #8\n\t"
return errorcount;
}
+static void am79c961_mc_hash(char *addr, u16 *hash)
+{
+ if (addr[0] & 0x01) {
+ int idx, bit;
+ u32 crc;
+
+ crc = ether_crc_le(ETH_ALEN, addr);
+
+ idx = crc >> 30;
+ bit = (crc >> 26) & 15;
+
+ hash[idx] |= 1 << bit;
+ }
+}
+
+static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
+{
+ unsigned int mode = MODE_PORT_10BT;
+
+ if (dev->flags & IFF_PROMISC) {
+ mode |= MODE_PROMISC;
+ memset(hash, 0xff, 4 * sizeof(*hash));
+ } else if (dev->flags & IFF_ALLMULTI) {
+ memset(hash, 0xff, 4 * sizeof(*hash));
+ } else {
+ struct netdev_hw_addr *ha;
+
+ memset(hash, 0, 4 * sizeof(*hash));
+
+ netdev_for_each_mc_addr(ha, dev)
+ am79c961_mc_hash(ha->addr, hash);
+ }
+
+ return mode;
+}
+
static void
am79c961_init_for_open(struct net_device *dev)
{
unsigned long flags;
unsigned char *p;
u_int hdr_addr, first_free_addr;
+ u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
int i;
/*
write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, 0);
+ write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
- i = MODE_PORT_10BT;
- if (dev->flags & IFF_PROMISC)
- i |= MODE_PROMISC;
-
- write_rreg (dev->base_addr, MODE, i);
+ write_rreg (dev->base_addr, MODE, mode);
write_rreg (dev->base_addr, POLLINT, 0);
write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
return 0;
}
-static void am79c961_mc_hash(char *addr, unsigned short *hash)
-{
- if (addr[0] & 0x01) {
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
- }
-}
-
/*
* Set or clear promiscuous/multicast mode filter for this adapter.
*/
{
struct dev_priv *priv = netdev_priv(dev);
unsigned long flags;
- unsigned short multi_hash[4], mode;
+ u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
int i, stopped;
- mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(multi_hash, 0xff, sizeof(multi_hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(multi_hash, 0x00, sizeof(multi_hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, multi_hash);
- }
-
spin_lock_irqsave(&priv->chip_lock, flags);
stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
skb = dev_alloc_skb(length + 2);
if (likely(skb != NULL)) {
+ struct ep93xx_rdesc *rxd = &ep->descs->rdesc[entry];
skb_reserve(skb, 2);
- dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr,
+ dma_sync_single_for_cpu(dev->dev.parent, rxd->buf_addr,
length, DMA_FROM_DEVICE);
skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
+ dma_sync_single_for_device(dev->dev.parent,
+ rxd->buf_addr, length,
+ DMA_FROM_DEVICE);
skb_put(skb, length);
skb->protocol = eth_type_trans(skb, dev);
static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
+ struct ep93xx_tdesc *txd;
int entry;
if (unlikely(skb->len > MAX_PKT_SIZE)) {
entry = ep->tx_pointer;
ep->tx_pointer = (ep->tx_pointer + 1) & (TX_QUEUE_ENTRIES - 1);
- ep->descs->tdesc[entry].tdesc1 =
- TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
+ txd = &ep->descs->tdesc[entry];
+
+ txd->tdesc1 = TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
+ dma_sync_single_for_cpu(dev->dev.parent, txd->buf_addr, skb->len,
+ DMA_TO_DEVICE);
skb_copy_and_csum_dev(skb, ep->tx_buf[entry]);
- dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr,
- skb->len, DMA_TO_DEVICE);
+ dma_sync_single_for_device(dev->dev.parent, txd->buf_addr, skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb(skb);
spin_lock_irq(&ep->tx_pending_lock);
static void ep93xx_free_buffers(struct ep93xx_priv *ep)
{
+ struct device *dev = ep->dev->dev.parent;
int i;
- for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) {
+ for (i = 0; i < RX_QUEUE_ENTRIES; i++) {
dma_addr_t d;
d = ep->descs->rdesc[i].buf_addr;
if (d)
- dma_unmap_single(NULL, d, PAGE_SIZE, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_FROM_DEVICE);
if (ep->rx_buf[i] != NULL)
- free_page((unsigned long)ep->rx_buf[i]);
+ kfree(ep->rx_buf[i]);
}
- for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) {
+ for (i = 0; i < TX_QUEUE_ENTRIES; i++) {
dma_addr_t d;
d = ep->descs->tdesc[i].buf_addr;
if (d)
- dma_unmap_single(NULL, d, PAGE_SIZE, DMA_TO_DEVICE);
+ dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_TO_DEVICE);
if (ep->tx_buf[i] != NULL)
- free_page((unsigned long)ep->tx_buf[i]);
+ kfree(ep->tx_buf[i]);
}
- dma_free_coherent(NULL, sizeof(struct ep93xx_descs), ep->descs,
+ dma_free_coherent(dev, sizeof(struct ep93xx_descs), ep->descs,
ep->descs_dma_addr);
}
-/*
- * The hardware enforces a sub-2K maximum packet size, so we put
- * two buffers on every hardware page.
- */
static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
{
+ struct device *dev = ep->dev->dev.parent;
int i;
- ep->descs = dma_alloc_coherent(NULL, sizeof(struct ep93xx_descs),
- &ep->descs_dma_addr, GFP_KERNEL | GFP_DMA);
+ ep->descs = dma_alloc_coherent(dev, sizeof(struct ep93xx_descs),
+ &ep->descs_dma_addr, GFP_KERNEL);
if (ep->descs == NULL)
return 1;
- for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) {
- void *page;
+ for (i = 0; i < RX_QUEUE_ENTRIES; i++) {
+ void *buf;
dma_addr_t d;
- page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
- if (page == NULL)
+ buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL);
+ if (buf == NULL)
goto err;
- d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(NULL, d)) {
- free_page((unsigned long)page);
+ d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, d)) {
+ kfree(buf);
goto err;
}
- ep->rx_buf[i] = page;
+ ep->rx_buf[i] = buf;
ep->descs->rdesc[i].buf_addr = d;
ep->descs->rdesc[i].rdesc1 = (i << 16) | PKT_BUF_SIZE;
-
- ep->rx_buf[i + 1] = page + PKT_BUF_SIZE;
- ep->descs->rdesc[i + 1].buf_addr = d + PKT_BUF_SIZE;
- ep->descs->rdesc[i + 1].rdesc1 = ((i + 1) << 16) | PKT_BUF_SIZE;
}
- for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) {
- void *page;
+ for (i = 0; i < TX_QUEUE_ENTRIES; i++) {
+ void *buf;
dma_addr_t d;
- page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
- if (page == NULL)
+ buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL);
+ if (buf == NULL)
goto err;
- d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(NULL, d)) {
- free_page((unsigned long)page);
+ d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, d)) {
+ kfree(buf);
goto err;
}
- ep->tx_buf[i] = page;
+ ep->tx_buf[i] = buf;
ep->descs->tdesc[i].buf_addr = d;
-
- ep->tx_buf[i + 1] = page + PKT_BUF_SIZE;
- ep->descs->tdesc[i + 1].buf_addr = d + PKT_BUF_SIZE;
}
return 0;
}
ep = netdev_priv(dev);
ep->dev = dev;
+ SET_NETDEV_DEV(dev, &pdev->dev);
netif_napi_add(dev, &ep->napi, ep93xx_poll, 64);
platform_set_drvdata(pdev, dev);
MODULE_ALIAS("platform:bfin_mac");
#if defined(CONFIG_BFIN_MAC_USE_L1)
-# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
-# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr)
+# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num)
+# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr)
#else
-# define bfin_mac_alloc(dma_handle, size) \
- dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL)
-# define bfin_mac_free(dma_handle, ptr) \
- dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle)
+# define bfin_mac_alloc(dma_handle, size, num) \
+ dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL)
+# define bfin_mac_free(dma_handle, ptr, num) \
+ dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle)
#endif
#define PKT_BUF_SZ 1580
t = t->next;
}
}
- bfin_mac_free(dma_handle, tx_desc);
+ bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM);
}
if (rx_desc) {
r = r->next;
}
}
- bfin_mac_free(dma_handle, rx_desc);
+ bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM);
}
}
#endif
tx_desc = bfin_mac_alloc(&dma_handle,
- sizeof(struct net_dma_desc_tx) *
+ sizeof(struct net_dma_desc_tx),
CONFIG_BFIN_TX_DESC_NUM);
if (tx_desc == NULL)
goto init_error;
rx_desc = bfin_mac_alloc(&dma_handle,
- sizeof(struct net_dma_desc_rx) *
+ sizeof(struct net_dma_desc_rx),
CONFIG_BFIN_RX_DESC_NUM);
if (rx_desc == NULL)
goto init_error;
return next;
}
+#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
+
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
{
skb->dev = slave_dev;
skb->priority = 1;
+
+ skb->queue_mapping = bond_queue_mapping(skb);
+
if (unlikely(netpoll_tx_running(slave_dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
else
goto out;
np->dev = slave->dev;
+ strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ);
err = __netpoll_setup(np);
if (err) {
kfree(np);
return res;
}
+
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
{
/*
*/
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
+ /*
+ * Save the original txq to restore before passing to the driver
+ */
+ bond_queue_mapping(skb) = skb->queue_mapping;
+
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
txq -= dev->real_num_tx_queues;
if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */
/* Check CRC */
crc = ~ether_crc_le (256 - 4, sromdata);
- if (psrom->crc != crc) {
+ if (psrom->crc != cpu_to_le32(crc)) {
printk (KERN_ERR "%s: EEPROM data CRC error.\n",
dev->name);
return -1;
goto out_ep;
fep->fcc.mem = (void __iomem *)cpm2_immr;
- fpi->dpram_offset = cpm_dpalloc(128, 8);
+ fpi->dpram_offset = cpm_dpalloc(128, 32);
if (IS_ERR_VALUE(fpi->dpram_offset)) {
ret = fpi->dpram_offset;
goto out_fcccp;
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
* Copyright 2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
#endif
};
-unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
-unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
-
void lock_rx_qs(struct gfar_private *priv)
{
int i = 0x0;
rqfar--;
rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
- ftp_rqfpr[rqfar] = rqfpr;
- ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_NOMATCH;
- ftp_rqfpr[rqfar] = rqfpr;
- ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND;
rqfpr = class;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND;
rqfpr = class;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
return rqfar;
/* Default rule */
rqfcr = RQFCR_CMP_MATCH;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6);
/* Rest are masked rules */
rqfcr = RQFCR_CMP_NOMATCH;
for (i = 0; i < rqfar; i++) {
- ftp_rqfcr[i] = rqfcr;
- ftp_rqfpr[i] = rqfpr;
+ priv->ftp_rqfcr[i] = rqfcr;
+ priv->ftp_rqfpr[i] = rqfpr;
gfar_write_filer(priv, i, rqfcr, rqfpr);
}
}
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/* HW time stamping enabled flag */
int hwts_rx_en;
int hwts_tx_en;
+
+ /*Filer table*/
+ unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+ unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
};
-extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
-extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
static inline int gfar_has_errata(struct gfar_private *priv,
enum gfar_errata err)
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2003-2006, 2008-2009, 2011 Freescale Semiconductor, Inc.
*
* This software may be used and distributed according to
* the terms of the GNU Public License, Version 2, incorporated herein
if (ethflow & RXH_L2DA) {
fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_IP_SRC) {
fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & (RXH_IP_DST)) {
fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_L3_PROTO) {
fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_L4_B_0_1) {
fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_L4_B_2_3) {
fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
}
for (i = 0; i < MAX_FILER_IDX + 1; i++) {
- local_rqfpr[j] = ftp_rqfpr[i];
- local_rqfcr[j] = ftp_rqfcr[i];
+ local_rqfpr[j] = priv->ftp_rqfpr[i];
+ local_rqfcr[j] = priv->ftp_rqfcr[i];
j--;
- if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE |
+ if ((priv->ftp_rqfcr[i] == (RQFCR_PID_PARSE |
RQFCR_CLE |RQFCR_AND)) &&
- (ftp_rqfpr[i] == cmp_rqfpr))
+ (priv->ftp_rqfpr[i] == cmp_rqfpr))
break;
}
* if it was already programmed, we need to overwrite these rules
*/
for (l = i+1; l < MAX_FILER_IDX; l++) {
- if ((ftp_rqfcr[l] & RQFCR_CLE) &&
- !(ftp_rqfcr[l] & RQFCR_AND)) {
- ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
+ if ((priv->ftp_rqfcr[l] & RQFCR_CLE) &&
+ !(priv->ftp_rqfcr[l] & RQFCR_AND)) {
+ priv->ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
RQFCR_HASHTBL_0 | RQFCR_PID_MASK;
- ftp_rqfpr[l] = FPR_FILER_MASK;
- gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]);
+ priv->ftp_rqfpr[l] = FPR_FILER_MASK;
+ gfar_write_filer(priv, l, priv->ftp_rqfcr[l],
+ priv->ftp_rqfpr[l]);
break;
}
- if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND))
+ if (!(priv->ftp_rqfcr[l] & RQFCR_CLE) &&
+ (priv->ftp_rqfcr[l] & RQFCR_AND))
continue;
else {
- local_rqfpr[j] = ftp_rqfpr[l];
- local_rqfcr[j] = ftp_rqfcr[l];
+ local_rqfpr[j] = priv->ftp_rqfpr[l];
+ local_rqfcr[j] = priv->ftp_rqfcr[l];
j--;
}
}
/* Write back the popped out rules again */
for (k = j+1; k < MAX_FILER_IDX; k++) {
- ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
- ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
+ priv->ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
+ priv->ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
gfar_write_filer(priv, priv->cur_filer_idx,
local_rqfcr[k], local_rqfpr[k]);
if (!priv->cur_filer_idx)
hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
lp->txrcommit++;
- spin_unlock_irqrestore(&lp->lock, flags);
- /* Update statistics */
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
+ spin_unlock_irqrestore(&lp->lock, flags);
+
return NETDEV_TX_OK;
drop:
}
/* Initialise a single lance board at the given DIO device */
-static void __init hplance_init(struct net_device *dev, struct dio_dev *d)
+static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d)
{
unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
struct hplance_private *lp;
}
#endif /* CONFIG_PCI_IOV */
adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+ /* i350 cannot do RSS and SR-IOV at the same time */
+ if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
+ adapter->rss_queues = 1;
/*
* if rss_queues > 4 or vfs are going to be allocated with rss_queues
netxen_tso_check(netdev, tx_ring, first_desc, skb);
- netxen_nic_update_cmd_producer(adapter, tx_ring);
-
adapter->stats.txbytes += skb->len;
adapter->stats.xmitcalled++;
+ netxen_nic_update_cmd_producer(adapter, tx_ring);
+
return NETDEV_TX_OK;
drop_packet:
config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
---help---
Currently supports the 6348 and 6358 PHYs.
/* time stamping methods */
-static void decode_evnt(struct dp83640_private *dp83640,
- struct phy_txts *phy_txts, u16 ests)
+static int decode_evnt(struct dp83640_private *dp83640,
+ void *data, u16 ests)
{
+ struct phy_txts *phy_txts;
struct ptp_clock_event event;
int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK;
+ u16 ext_status = 0;
+
+ if (ests & MULT_EVNT) {
+ ext_status = *(u16 *) data;
+ data += sizeof(ext_status);
+ }
+
+ phy_txts = data;
switch (words) { /* fall through in every case */
case 3:
event.timestamp = phy2txts(&dp83640->edata);
ptp_clock_event(dp83640->clock->ptp_clock, &event);
+
+ words = ext_status ? words + 2 : words + 1;
+ return words * sizeof(u16);
}
static void decode_rxts(struct dp83640_private *dp83640,
} else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) {
- phy_txts = (struct phy_txts *) ptr;
- decode_evnt(dp83640, phy_txts, ests);
- size = sizeof(*phy_txts);
+ size = decode_evnt(dp83640, ptr, ests);
} else {
size = 0;
if (is_status_frame(skb, type)) {
decode_status_frame(dp83640, skb);
- /* Let the stack drop this frame. */
- return false;
+ kfree_skb(skb);
+ return true;
}
SKB_PTP_TYPE(skb) = type;
#define PUT_BYTE(ap, buf, c, islcp) do { \
if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
*buf++ = PPP_ESCAPE; \
- *buf++ = c ^ 0x20; \
+ *buf++ = c ^ PPP_TRANS; \
} else \
*buf++ = c; \
} while (0)
sp = skb_put(skb, n);
memcpy(sp, buf, n);
if (ap->state & SC_ESCAPE) {
- sp[0] ^= 0x20;
+ sp[0] ^= PPP_TRANS;
ap->state &= ~SC_ESCAPE;
}
}
wmb();
wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD);
- stats->tx_bytes += skb->len;
+ stats->tx_bytes += length;
stats->tx_packets++;
dev->trans_start = jiffies;
if (pep->tx_ring_size - pep->tx_desc_count <= 1) {
for (loop = 0; loop < que->no_ops; loop++) {
QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+ addr = que->read_addr;
for (i = 0; i < cnt; i++) {
QLCNIC_RD_DUMP_REG(addr, base, &data);
*buffer++ = cpu_to_le32(data);
nf = &pbuf->frag_array[0];
pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
+ pbuf->skb = NULL;
}
static inline void
*
* (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
*/
- static const struct {
+ static const struct rtl_mac_info {
u32 mask;
u32 val;
int mac_version;
/* Catch-all */
{ 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE }
- }, *p = mac_info;
+ };
+ const struct rtl_mac_info *p = mac_info;
u32 reg;
reg = RTL_R32(TxConfig);
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
{
- static const struct {
+ static const struct rtl_cfg2_info {
u32 mac_version;
u32 clk;
u32 val;
{ RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
{ RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
{ RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
- }, *p = cfg2_info;
+ };
+ const struct rtl_cfg2_info *p = cfg2_info;
unsigned int i;
u32 clk;
{ .compatible = "smsc,lan91c94", },
{ .compatible = "smsc,lan91c111", },
{},
-}
+};
MODULE_DEVICE_TABLE(of, smc91x_match);
+#else
+#define smc91x_match NULL
#endif
static struct dev_pm_ops smc_drv_pm_ops = {
.name = CARDNAME,
.owner = THIS_MODULE,
.pm = &smc_drv_pm_ops,
-#ifdef CONFIG_OF
.of_match_table = smc91x_match,
-#endif
},
};
return (features & tun->set_features) | (features & ~TUN_USER_FEATURES);
}
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void tun_poll_controller(struct net_device *dev)
+{
+ /*
+ * Tun only receives frames when:
+ * 1) the char device endpoint gets data from user space
+ * 2) the tun socket gets a sendmsg call from user space
+ * Since both of those are syncronous operations, we are guaranteed
+ * never to have pending data when we poll for it
+ * so theres nothing to do here but return.
+ * We need this though so netpoll recognizes us as an interface that
+ * supports polling, which enables bridge devices in virt setups to
+ * still use netconsole
+ */
+ return;
+}
+#endif
static const struct net_device_ops tun_netdev_ops = {
.ndo_uninit = tun_net_uninit,
.ndo_open = tun_net_open,
.ndo_start_xmit = tun_net_xmit,
.ndo_change_mtu = tun_net_change_mtu,
.ndo_fix_features = tun_net_fix_features,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tun_poll_controller,
+#endif
};
static const struct net_device_ops tap_netdev_ops = {
.ndo_set_multicast_list = tun_net_mclist,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tun_poll_controller,
+#endif
};
/* Initialize net device. */
router with USB ethernet port. This driver is for routers only,
it will not work with ADSL modems (use cxacru driver instead).
+config USB_NET_KALMIA
+ tristate "Samsung Kalmia based LTE USB modem"
+ depends on USB_USBNET
+ help
+ Choose this option if you have a Samsung Kalmia based USB modem
+ as Samsung GT-B3730.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kalmia.
+
config USB_HSO
tristate "Option USB High Speed Mobile Devices"
depends on USB && RFKILL
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o
+obj-$(CONFIG_USB_NET_KALMIA) += kalmia.o
obj-$(CONFIG_USB_IPHETH) += ipheth.o
obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o
obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o
--- /dev/null
+/*
+ * USB network interface driver for Samsung Kalmia based LTE USB modem like the
+ * Samsung GT-B3730 and GT-B3710.
+ *
+ * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
+ *
+ * Sponsored by Quicklink Video Distribution Services Ltd.
+ *
+ * Based on the cdc_eem module.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+/*
+ * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
+ * handled by the "option" module and an ethernet data port handled by this
+ * module.
+ *
+ * The stick must first be switched into modem mode by usb_modeswitch
+ * or similar tool. Then the modem gets sent two initialization packets by
+ * this module, which gives the MAC address of the device. User space can then
+ * connect the modem using AT commands through the ACM port and then use
+ * DHCP on the network interface exposed by this module. Network packets are
+ * sent to and from the modem in a proprietary format discovered after watching
+ * the behavior of the windows driver for the modem.
+ *
+ * More information about the use of the modem is available in usb_modeswitch
+ * forum and the project page:
+ *
+ * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
+ * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE */
+
+#define KALMIA_HEADER_LENGTH 6
+#define KALMIA_ALIGN_SIZE 4
+#define KALMIA_USB_TIMEOUT 10000
+
+/*-------------------------------------------------------------------------*/
+
+static int
+kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
+ u8 *buffer, u8 expected_len)
+{
+ int act_len;
+ int status;
+
+ netdev_dbg(dev->net, "Sending init packet");
+
+ status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
+ init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
+ if (status != 0) {
+ netdev_err(dev->net,
+ "Error sending init packet. Status %i, length %i\n",
+ status, act_len);
+ return status;
+ }
+ else if (act_len != init_msg_len) {
+ netdev_err(dev->net,
+ "Did not send all of init packet. Bytes sent: %i",
+ act_len);
+ }
+ else {
+ netdev_dbg(dev->net, "Successfully sent init packet.");
+ }
+
+ status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
+ buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);
+
+ if (status != 0)
+ netdev_err(dev->net,
+ "Error receiving init result. Status %i, length %i\n",
+ status, act_len);
+ else if (act_len != expected_len)
+ netdev_err(dev->net, "Unexpected init result length: %i\n",
+ act_len);
+
+ return status;
+}
+
+static int
+kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
+{
+ char init_msg_1[] =
+ { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
+ 0x00, 0x00 };
+ char init_msg_2[] =
+ { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
+ 0x00, 0x00 };
+ char receive_buf[28];
+ int status;
+
+ status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1)
+ / sizeof(init_msg_1[0]), receive_buf, 24);
+ if (status != 0)
+ return status;
+
+ status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2)
+ / sizeof(init_msg_2[0]), receive_buf, 28);
+ if (status != 0)
+ return status;
+
+ memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN);
+
+ return status;
+}
+
+static int
+kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 status;
+ u8 ethernet_addr[ETH_ALEN];
+
+ /* Don't bind to AT command interface */
+ if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+ return -EINVAL;
+
+ dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
+ dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
+ dev->status = NULL;
+
+ dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
+ dev->hard_mtu = 1400;
+ dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing
+
+ status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
+
+ if (status < 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(driver_of(intf), intf);
+ return status;
+ }
+
+ memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);
+ memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN);
+
+ return status;
+}
+
+static struct sk_buff *
+kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ struct sk_buff *skb2 = NULL;
+ u16 content_len;
+ unsigned char *header_start;
+ unsigned char ether_type_1, ether_type_2;
+ u8 remainder, padlen = 0;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
+ >= KALMIA_HEADER_LENGTH))
+ goto done;
+
+ if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
+ + KALMIA_ALIGN_SIZE)) {
+ skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
+ skb->data, skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ goto done;
+ }
+ }
+
+ skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
+ KALMIA_ALIGN_SIZE, flags);
+ if (!skb2)
+ return NULL;
+
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+
+ done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+ ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
+ ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
+
+ netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
+ ether_type_2);
+
+ /* According to empiric data for data packages */
+ header_start[0] = 0x57;
+ header_start[1] = 0x44;
+ content_len = skb->len - KALMIA_HEADER_LENGTH;
+ header_start[2] = (content_len & 0xff); /* low byte */
+ header_start[3] = (content_len >> 8); /* high byte */
+
+ header_start[4] = ether_type_1;
+ header_start[5] = ether_type_2;
+
+ /* Align to 4 bytes by padding with zeros */
+ remainder = skb->len % KALMIA_ALIGN_SIZE;
+ if (remainder > 0) {
+ padlen = KALMIA_ALIGN_SIZE - remainder;
+ memset(skb_put(skb, padlen), 0, padlen);
+ }
+
+ netdev_dbg(
+ dev->net,
+ "Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.",
+ content_len, padlen, header_start[0], header_start[1],
+ header_start[2], header_start[3], header_start[4],
+ header_start[5]);
+
+ return skb;
+}
+
+static int
+kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /*
+ * Our task here is to strip off framing, leaving skb with one
+ * data frame for the usbnet framework code to process.
+ */
+ const u8 HEADER_END_OF_USB_PACKET[] =
+ { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
+ const u8 EXPECTED_UNKNOWN_HEADER_1[] =
+ { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
+ const u8 EXPECTED_UNKNOWN_HEADER_2[] =
+ { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
+ u8 i = 0;
+
+ /* incomplete header? */
+ if (skb->len < KALMIA_HEADER_LENGTH)
+ return 0;
+
+ do {
+ struct sk_buff *skb2 = NULL;
+ u8 *header_start;
+ u16 usb_packet_length, ether_packet_length;
+ int is_last;
+
+ header_start = skb->data;
+
+ if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
+ if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
+ sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
+ header_start, EXPECTED_UNKNOWN_HEADER_2,
+ sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
+ netdev_dbg(
+ dev->net,
+ "Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1],
+ header_start[2], header_start[3],
+ header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+ }
+ else {
+ netdev_err(
+ dev->net,
+ "Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1],
+ header_start[2], header_start[3],
+ header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+ return 0;
+ }
+ }
+ else
+ netdev_dbg(
+ dev->net,
+ "Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1], header_start[2],
+ header_start[3], header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+
+ /* subtract start header and end header */
+ usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
+ ether_packet_length = header_start[2] + (header_start[3] << 8);
+ skb_pull(skb, KALMIA_HEADER_LENGTH);
+
+ /* Some small packets misses end marker */
+ if (usb_packet_length < ether_packet_length) {
+ ether_packet_length = usb_packet_length
+ + KALMIA_HEADER_LENGTH;
+ is_last = true;
+ }
+ else {
+ netdev_dbg(dev->net, "Correct package length #%i", i
+ + 1);
+
+ is_last = (memcmp(skb->data + ether_packet_length,
+ HEADER_END_OF_USB_PACKET,
+ sizeof(HEADER_END_OF_USB_PACKET)) == 0);
+ if (!is_last) {
+ header_start = skb->data + ether_packet_length;
+ netdev_dbg(
+ dev->net,
+ "End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1],
+ header_start[2], header_start[3],
+ header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+ }
+ }
+
+ if (is_last) {
+ skb2 = skb;
+ }
+ else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ return 0;
+ }
+
+ skb_trim(skb2, ether_packet_length);
+
+ if (is_last) {
+ return 1;
+ }
+ else {
+ usbnet_skb_return(dev, skb2);
+ skb_pull(skb, ether_packet_length);
+ }
+
+ i++;
+ }
+ while (skb->len);
+
+ return 1;
+}
+
+static const struct driver_info kalmia_info = {
+ .description = "Samsung Kalmia LTE USB dongle",
+ .flags = FLAG_WWAN,
+ .bind = kalmia_bind,
+ .rx_fixup = kalmia_rx_fixup,
+ .tx_fixup = kalmia_tx_fixup
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+ /* The unswitched USB ID, to get the module auto loaded: */
+ { USB_DEVICE(0x04e8, 0x689a) },
+ /* The stick swithed into modem (by e.g. usb_modeswitch): */
+ { USB_DEVICE(0x04e8, 0x6889),
+ .driver_info = (unsigned long) &kalmia_info, },
+ { /* EMPTY == end of list */} };
+MODULE_DEVICE_TABLE( usb, products);
+
+static struct usb_driver kalmia_driver = {
+ .name = "kalmia",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume
+};
+
+static int __init kalmia_init(void)
+{
+ return usb_register(&kalmia_driver);
+}
+module_init( kalmia_init);
+
+static void __exit kalmia_exit(void)
+{
+ usb_deregister(&kalmia_driver);
+}
+module_exit( kalmia_exit);
+
+MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
+MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
+MODULE_LICENSE("GPL");
if (port->mode != FST_RAW) {
err = hdlc_open(dev);
- if (err)
+ if (err) {
+ module_put(THIS_MODULE);
return err;
+ }
}
fst_openport(port);
module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+static int modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+
/* Module info */
MODULE_AUTHOR("Jiri Slaby");
MODULE_AUTHOR("Nick Kossifidis");
struct ath5k_hw *ah = sc->ah;
struct ath_common *common = ath5k_hw_common(ah);
int ret, ani_mode;
+ bool fast;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
ath5k_drain_tx_buffs(sc);
if (chan)
sc->curchan = chan;
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+
+ fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
+
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
/* Non fatal, can happen eg.
* on mode change */
ret = 0;
- } else
+ } else {
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+ "fast chan change successful\n");
return 0;
+ }
}
/*
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_legacy_chswitch_done(priv, false);
}
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
iwl_legacy_print_rx_config_cmd(priv, ctx);
- return 0;
+ goto set_tx_power;
}
/* If we are currently associated and the new config requires
iwl4965_init_sensitivity(priv);
+set_tx_power:
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);
return rc;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
return iwl_legacy_send_cmd_pdu(priv,
REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
EXPORT_SYMBOL(iwl_legacy_chswitch_done);
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_legacy_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_legacy_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_legacy_chswitch_done(priv, false);
- }
+ iwl_legacy_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_legacy_chswitch_done(priv, false);
}
}
EXPORT_SYMBOL(iwl_legacy_rx_csa);
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
-
+#define STATUS_CHANNEL_SWITCH_PENDING 18
static inline int iwl_legacy_is_ready(struct iwl_priv *priv)
{
#endif
};
-/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
/* 1st responses from initialize and runtime uCode images.
* _4965's initialize alive response contains some calibration data. */
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_legacy_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
* at this point, staging_rxon has the
* configuration for channel switch
*/
- if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
+ if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
return 0;
}
-static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- /*
- * MULTI-FIXME
- * See iwl_mac_channel_switch.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- struct iwl_host_cmd hcmd = {
- .id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
- .flags = CMD_SYNC,
- .data = { &cmd, },
- };
-
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ch_switch->channel->hw_value;
- IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
- ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
- return iwl_send_cmd_sync(priv, &hcmd);
-}
-
static struct iwl_lib_ops iwl2000_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
- .set_channel_switch = iwl2030_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl2000_nic_config,
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
};
static struct iwl_ht_params iwl5000_ht_params = {
.ht_greenfield_support = true,
- .use_rts_for_aggregation = true, /* use rts/cts protection */
};
#define IWL_DEVICE_5000 \
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
__le16 fc, __le32 *tx_flags)
{
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
- info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
+ info->flags & IEEE80211_TX_CTL_AMPDU)
*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
- return;
- }
-
- if (priv->cfg->ht_params &&
- priv->cfg->ht_params->use_rts_for_aggregation &&
- info->flags & IEEE80211_TX_CTL_AMPDU) {
- *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
- return;
- }
}
/* Calc max signal level (dBm) among 3 possible receivers */
return 0;
}
+ /*
+ * force CTS-to-self frames protection if RTS-CTS is not preferred
+ * one aggregation protection method
+ */
+ if (!(priv->cfg->ht_params &&
+ priv->cfg->ht_params->use_rts_for_aggregation))
+ ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_chswitch_done(priv, false);
}
}
memcpy(active, &ctx->staging, sizeof(*active));
+ /*
+ * We do not commit tx power settings while channel changing,
+ * do it now if after settings changed.
+ */
+ iwl_set_tx_power(priv, priv->tx_power_next, false);
return 0;
}
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
* at this point, staging_rxon has the
* configuration for channel switch
*/
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
#ifdef CONFIG_IWLWIFI_DEBUG
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
static inline int iwl_is_ready(struct iwl_priv *priv)
#endif
};
-/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
struct {
u32 error_event_table;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, false);
- }
+ iwl_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_chswitch_done(priv, false);
}
}
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
- if (ret)
+ if (ret || !cause)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
if (ret)
goto release;
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
else
card->rx_unit = 0;
+ /*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
/*
* Enable interrupts now that everything is set up
*/
*(unsigned long *) wdev_priv = (unsigned long) priv;
+ set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev);
+
ret = wiphy_register(wdev->wiphy);
if (ret < 0) {
dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
* faster client.
*/
#define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400
+#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR 0x00000200
#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080
#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020
#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010
cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT |
MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP |
MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON |
- MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY);
+ MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY |
+ MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR);
cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2x00link_reset_tuner(rt2x00dev, false);
- if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
(ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
(conf->flags & IEEE80211_CONF_PS)) {
beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, autowakeup_work.work);
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
ERROR(rt2x00dev, "Device failed to wakeup.\n");
clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
* Stop all work.
*/
cancel_work_sync(&rt2x00dev->intf_work);
+ cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
if (rt2x00_is_usb(rt2x00dev)) {
del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
&rx_status,
(u8 *) pdesc, skb);
+ new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
+ if (unlikely(!new_skb)) {
+ RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
+ DBG_DMESG,
+ ("can't alloc skb for rx\n"));
+ goto done;
+ }
+
+ pci_unmap_single(rtlpci->pdev,
+ *((dma_addr_t *) skb->cb),
+ rtlpci->rxbuffersize,
+ PCI_DMA_FROMDEVICE);
+
skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
false,
HW_DESC_RXPKT_LEN));
hdr = rtl_get_hdr(skb);
fc = rtl_get_fc(skb);
- /* try for new buffer - if allocation fails, drop
- * frame and reuse old buffer
- */
- new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
- if (unlikely(!new_skb)) {
- RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
- DBG_DMESG,
- ("can't alloc skb for rx\n"));
- goto done;
- }
- pci_unmap_single(rtlpci->pdev,
- *((dma_addr_t *) skb->cb),
- rtlpci->rxbuffersize,
- PCI_DMA_FROMDEVICE);
-
- if (!stats.crc || !stats.hwerror) {
+ if (!stats.crc && !stats.hwerror) {
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status,
sizeof(rx_status));
.notifier_call = module_load_notify,
};
+static void free_all_tasks(void)
+{
+ /* make sure we don't leak task structs */
+ process_task_mortuary();
+ process_task_mortuary();
+}
+
int sync_start(void)
{
int err;
if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
return -ENOMEM;
- mutex_lock(&buffer_mutex);
-
err = task_handoff_register(&task_free_nb);
if (err)
goto out1;
start_cpu_work();
out:
- mutex_unlock(&buffer_mutex);
return err;
out4:
profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
out2:
task_handoff_unregister(&task_free_nb);
+ free_all_tasks();
out1:
free_cpumask_var(marked_cpus);
goto out;
void sync_stop(void)
{
- /* flush buffers */
- mutex_lock(&buffer_mutex);
end_cpu_work();
unregister_module_notifier(&module_load_nb);
profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
task_handoff_unregister(&task_free_nb);
- mutex_unlock(&buffer_mutex);
- flush_cpu_work();
+ barrier(); /* do all of the above first */
- /* make sure we don't leak task structs */
- process_task_mortuary();
- process_task_mortuary();
+ flush_cpu_work();
+ free_all_tasks();
free_cpumask_var(marked_cpus);
}
obj-$(CONFIG_MN10300) += setup-bus.o
obj-$(CONFIG_MICROBLAZE) += setup-bus.o
obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
+obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o
#
# ACPI Related PCI FW Functions
}
#else
-static inline int init_iommu_pm_ops(void) { }
+static inline void init_iommu_pm_ops(void) {}
#endif /* CONFIG_PM */
/*
}
static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
if (arch_set_vga_state)
return arch_set_vga_state(dev, decode, command_bits,
- change_bridge);
+ flags);
return 0;
}
*
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_device.h>
caps.n_ext_ts = ptp->info->n_ext_ts;
caps.n_per_out = ptp->info->n_per_out;
caps.pps = ptp->info->pps;
- err = copy_to_user((void __user *)arg, &caps, sizeof(caps));
+ if (copy_to_user((void __user *)arg, &caps, sizeof(caps)))
+ err = -EFAULT;
break;
case PTP_EXTTS_REQUEST:
return -ERESTARTSYS;
}
- if (ptp->defunct)
+ if (ptp->defunct) {
+ mutex_unlock(&ptp->tsevq_mux);
return -ENODEV;
+ }
spin_lock_irqsave(&queue->lock, flags);
mutex_unlock(&ptp->tsevq_mux);
- if (copy_to_user(buf, event, cnt)) {
- mutex_unlock(&ptp->tsevq_mux);
+ if (copy_to_user(buf, event, cnt))
return -EFAULT;
- }
return cnt;
}
Enable support for the Linux driver side of the Tilera
hypervisor's real-time clock interface.
+config RTC_DRV_PUV3
+ tristate "PKUnity v3 RTC support"
+ depends on ARCH_PUV3
+ help
+ This enables support for the RTC in the PKUnity-v3 SoCs.
+
+ This drive can also be built as a module. If so, the module
+ will be called rtc-puv3.
+
endif # RTC_CLASS
obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
+obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
-int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
struct rtc_time tm;
long now, scheduled;
err = ops->ioctl(rtc->dev.parent, cmd, arg);
if (err == -ENOIOCTLCMD)
err = -ENOTTY;
- }
+ } else
+ err = -ENOTTY;
break;
}
static int __devexit m41t93_remove(struct spi_device *spi)
{
- struct rtc_device *rtc = platform_get_drvdata(spi);
+ struct rtc_device *rtc = spi_get_drvdata(spi);
if (rtc)
rtc_device_unregister(rtc);
/*
- * linux/arch/unicore32/kernel/rtc.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
+ * RTC driver code specific to PKUnity SoC and UniCore ISA
*
* Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
* Copyright (C) 2001-2010 Guan Xuetao
static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
/* IRQ Handlers */
-
static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
{
struct rtc_device *rdev = id;
}
/* Time read/write */
-
static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
{
rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
/* do not clear AIE here, it may be needed for wake */
-
puv3_rtc_setpie(dev, 0);
free_irq(puv3_rtc_alarmno, rtc_dev);
free_irq(puv3_rtc_tickno, rtc_dev);
writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
} else {
/* re-enable the device, and check it is ok */
-
if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
pr_debug("%s: probe=%p\n", __func__, pdev);
/* find the IRQs */
-
puv3_rtc_tickno = platform_get_irq(pdev, 1);
if (puv3_rtc_tickno < 0) {
dev_err(&pdev->dev, "no irq for rtc tick\n");
puv3_rtc_tickno, puv3_rtc_alarmno);
/* get the memory region */
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "failed to get memory region resource\n");
puv3_rtc_enable(pdev, 1);
/* register RTC and exit */
-
rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
THIS_MODULE);
#ifdef CONFIG_PM
-/* RTC Power management control */
-
static int ticnt_save;
static int puv3_rtc_suspend(struct platform_device *pdev, pm_message_t state)
MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
MODULE_AUTHOR("Hu Dongliang");
MODULE_LICENSE("GPL v2");
-
/* special handling for no target buffer empty */
if ((!q->is_input_q &&
- (q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) {
+ (q->sbal[q->first_to_check]->element[15].sflags) == 0x10)) {
qperf_inc(q, target_full);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x",
q->first_to_check);
DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr);
DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count);
DBF_ERROR("F14:%2x F15:%2x",
- q->sbal[q->first_to_check]->element[14].flags & 0xff,
- q->sbal[q->first_to_check]->element[15].flags & 0xff);
+ q->sbal[q->first_to_check]->element[14].sflags,
+ q->sbal[q->first_to_check]->element[15].sflags);
/*
* Interrupts may be avoided as long as the error is present
static inline int qeth_is_last_sbale(struct qdio_buffer_element *sbale)
{
- return (sbale->flags & SBAL_FLAGS_LAST_ENTRY);
+ return (sbale->eflags & SBAL_EFLAGS_LAST_ENTRY);
}
enum qeth_qdio_buffer_states {
struct sk_buff *skb;
/* is PCI flag set on buffer? */
- if (buf->buffer->element[0].flags & 0x40)
+ if (buf->buffer->element[0].sflags & SBAL_SFLAGS0_PCI_REQ)
atomic_dec(&queue->set_pci_flags_count);
skb = skb_dequeue(&buf->skb_list);
buf->is_header[i] = 0;
buf->buffer->element[i].length = 0;
buf->buffer->element[i].addr = NULL;
- buf->buffer->element[i].flags = 0;
+ buf->buffer->element[i].eflags = 0;
+ buf->buffer->element[i].sflags = 0;
}
- buf->buffer->element[15].flags = 0;
+ buf->buffer->element[15].eflags = 0;
+ buf->buffer->element[15].sflags = 0;
buf->next_element_to_fill = 0;
atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
}
buf->buffer->element[i].length = PAGE_SIZE;
buf->buffer->element[i].addr = pool_entry->elements[i];
if (i == QETH_MAX_BUFFER_ELEMENTS(card) - 1)
- buf->buffer->element[i].flags = SBAL_FLAGS_LAST_ENTRY;
+ buf->buffer->element[i].eflags = SBAL_EFLAGS_LAST_ENTRY;
else
- buf->buffer->element[i].flags = 0;
+ buf->buffer->element[i].eflags = 0;
+ buf->buffer->element[i].sflags = 0;
}
return 0;
}
if (qdio_error) {
QETH_CARD_TEXT(card, 2, dbftext);
QETH_CARD_TEXT_(card, 2, " F15=%02X",
- buf->element[15].flags & 0xff);
+ buf->element[15].sflags);
QETH_CARD_TEXT_(card, 2, " F14=%02X",
- buf->element[14].flags & 0xff);
+ buf->element[14].sflags);
QETH_CARD_TEXT_(card, 2, " qerr=%X", qdio_error);
- if ((buf->element[15].flags & 0xff) == 0x12) {
+ if ((buf->element[15].sflags) == 0x12) {
card->stats.rx_dropped++;
return 0;
} else
static int qeth_handle_send_error(struct qeth_card *card,
struct qeth_qdio_out_buffer *buffer, unsigned int qdio_err)
{
- int sbalf15 = buffer->buffer->element[15].flags & 0xff;
+ int sbalf15 = buffer->buffer->element[15].sflags;
QETH_CARD_TEXT(card, 6, "hdsnderr");
if (card->info.type == QETH_CARD_TYPE_IQD) {
for (i = index; i < index + count; ++i) {
buf = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
- buf->buffer->element[buf->next_element_to_fill - 1].flags |=
- SBAL_FLAGS_LAST_ENTRY;
+ buf->buffer->element[buf->next_element_to_fill - 1].eflags |=
+ SBAL_EFLAGS_LAST_ENTRY;
if (queue->card->info.type == QETH_CARD_TYPE_IQD)
continue;
/* it's likely that we'll go to packing
* mode soon */
atomic_inc(&queue->set_pci_flags_count);
- buf->buffer->element[0].flags |= 0x40;
+ buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ;
}
} else {
if (!atomic_read(&queue->set_pci_flags_count)) {
* further send was requested by the stack
*/
atomic_inc(&queue->set_pci_flags_count);
- buf->buffer->element[0].flags |= 0x40;
+ buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ;
}
}
}
if (!length) {
if (first_lap)
if (skb_shinfo(skb)->nr_frags)
- buffer->element[element].flags =
- SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_FIRST_FRAG;
else
- buffer->element[element].flags = 0;
+ buffer->element[element].eflags = 0;
else
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
} else {
if (first_lap)
- buffer->element[element].flags =
- SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_FIRST_FRAG;
else
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
}
data += length_here;
element++;
buffer->element[element].addr = (char *)page_to_phys(frag->page)
+ frag->page_offset;
buffer->element[element].length = frag->size;
- buffer->element[element].flags = SBAL_FLAGS_MIDDLE_FRAG;
+ buffer->element[element].eflags = SBAL_EFLAGS_MIDDLE_FRAG;
element++;
}
- if (buffer->element[element - 1].flags)
- buffer->element[element - 1].flags = SBAL_FLAGS_LAST_FRAG;
+ if (buffer->element[element - 1].eflags)
+ buffer->element[element - 1].eflags = SBAL_EFLAGS_LAST_FRAG;
*next_element_to_fill = element;
}
/*fill first buffer entry only with header information */
buffer->element[element].addr = skb->data;
buffer->element[element].length = hdr_len;
- buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags = SBAL_EFLAGS_FIRST_FRAG;
buf->next_element_to_fill++;
skb->data += hdr_len;
skb->len -= hdr_len;
buffer->element[element].addr = hdr;
buffer->element[element].length = sizeof(struct qeth_hdr) +
hd_len;
- buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags = SBAL_EFLAGS_FIRST_FRAG;
buf->is_header[element] = 1;
buf->next_element_to_fill++;
}
}
static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio,
- u32 fsf_cmd, u32 sbtype,
+ u32 fsf_cmd, u8 sbtype,
mempool_t *pool)
{
struct zfcp_adapter *adapter = qdio->adapter;
if (zfcp_qdio_sbal_get(qdio))
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_ABORT_FCP_CMND,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.scsi_abort);
if (IS_ERR(req)) {
req = NULL;
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC,
- SBAL_FLAGS0_TYPE_WRITE_READ, pool);
+ SBAL_SFLAGS0_TYPE_WRITE_READ, pool);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS,
- SBAL_FLAGS0_TYPE_WRITE_READ, NULL);
+ SBAL_SFLAGS0_TYPE_WRITE_READ, NULL);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out_unlock;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA,
- SBAL_FLAGS0_TYPE_READ, NULL);
+ SBAL_SFLAGS0_TYPE_READ, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out_unlock;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA,
- SBAL_FLAGS0_TYPE_READ, NULL);
+ SBAL_SFLAGS0_TYPE_READ, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PHYSICAL_PORT,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_LUN,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
adapter->pool.erp_req);
if (IS_ERR(req)) {
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_LUN,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
{
struct zfcp_fsf_req *req;
struct fcp_cmnd *fcp_cmnd;
- unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
+ u8 sbtype = SBAL_SFLAGS0_TYPE_READ;
int real_bytes, retval = -EIO, dix_bytes = 0;
struct scsi_device *sdev = scsi_cmnd->device;
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
}
if (scsi_cmnd->sc_data_direction == DMA_TO_DEVICE)
- sbtype = SBAL_FLAGS0_TYPE_WRITE;
+ sbtype = SBAL_SFLAGS0_TYPE_WRITE;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND,
sbtype, adapter->pool.scsi_req);
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND,
- SBAL_FLAGS0_TYPE_WRITE,
+ SBAL_SFLAGS0_TYPE_WRITE,
qdio->adapter->pool.scsi_req);
if (IS_ERR(req)) {
struct zfcp_qdio *qdio = adapter->qdio;
struct zfcp_fsf_req *req = NULL;
struct fsf_qtcb_bottom_support *bottom;
- int direction, retval = -EIO, bytes;
+ int retval = -EIO, bytes;
+ u8 direction;
if (!(adapter->adapter_features & FSF_FEATURE_CFDC))
return ERR_PTR(-EOPNOTSUPP);
switch (fsf_cfdc->command) {
case FSF_QTCB_DOWNLOAD_CONTROL_FILE:
- direction = SBAL_FLAGS0_TYPE_WRITE;
+ direction = SBAL_SFLAGS0_TYPE_WRITE;
break;
case FSF_QTCB_UPLOAD_CONTROL_FILE:
- direction = SBAL_FLAGS0_TYPE_READ;
+ direction = SBAL_SFLAGS0_TYPE_READ;
break;
default:
return ERR_PTR(-EINVAL);
fsf_req->qdio_req.sbal_response = sbal_idx;
zfcp_fsf_req_complete(fsf_req);
- if (likely(sbale->flags & SBAL_FLAGS_LAST_ENTRY))
+ if (likely(sbale->eflags & SBAL_EFLAGS_LAST_ENTRY))
break;
}
}
/* set last entry flag in current SBALE of current SBAL */
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
- sbale->flags |= SBAL_FLAGS_LAST_ENTRY;
+ sbale->eflags |= SBAL_EFLAGS_LAST_ENTRY;
/* don't exceed last allowed SBAL */
if (q_req->sbal_last == q_req->sbal_limit)
/* set chaining flag in first SBALE of current SBAL */
sbale = zfcp_qdio_sbale_req(qdio, q_req);
- sbale->flags |= SBAL_FLAGS0_MORE_SBALS;
+ sbale->sflags |= SBAL_SFLAGS0_MORE_SBALS;
/* calculate index of next SBAL */
q_req->sbal_last++;
/* set storage-block type for new SBAL */
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
- sbale->flags |= q_req->sbtype;
+ sbale->sflags |= q_req->sbtype;
return sbale;
}
/* set storage-block type for this request */
sbale = zfcp_qdio_sbale_req(qdio, q_req);
- sbale->flags |= q_req->sbtype;
+ sbale->sflags |= q_req->sbtype;
for (; sg; sg = sg_next(sg)) {
sbale = zfcp_qdio_sbale_next(qdio, q_req);
for (cc = 0; cc < QDIO_MAX_BUFFERS_PER_Q; cc++) {
sbale = &(qdio->res_q[cc]->element[0]);
sbale->length = 0;
- sbale->flags = SBAL_FLAGS_LAST_ENTRY;
+ sbale->eflags = SBAL_EFLAGS_LAST_ENTRY;
+ sbale->sflags = 0;
sbale->addr = NULL;
}
* @qdio_outb_usage: usage of outbound queue
*/
struct zfcp_qdio_req {
- u32 sbtype;
+ u8 sbtype;
u8 sbal_number;
u8 sbal_first;
u8 sbal_last;
*/
static inline
void zfcp_qdio_req_init(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
- unsigned long req_id, u32 sbtype, void *data, u32 len)
+ unsigned long req_id, u8 sbtype, void *data, u32 len)
{
struct qdio_buffer_element *sbale;
int count = min(atomic_read(&qdio->req_q_free),
sbale = zfcp_qdio_sbale_req(qdio, q_req);
sbale->addr = (void *) req_id;
- sbale->flags = SBAL_FLAGS0_COMMAND | sbtype;
+ sbale->eflags = 0;
+ sbale->sflags = SBAL_SFLAGS0_COMMAND | sbtype;
if (unlikely(!data))
return;
struct qdio_buffer_element *sbale;
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
- sbale->flags |= SBAL_FLAGS_LAST_ENTRY;
+ sbale->eflags |= SBAL_EFLAGS_LAST_ENTRY;
}
/**
struct clk *clkp;
list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->ops)) {
+ if (likely(clkp->usecount && clkp->ops)) {
unsigned long rate = clkp->rate;
if (likely(clkp->ops->set_parent))
}
if ((clk_freq.cpsdvsr < CPSDVR_MIN)
|| (clk_freq.cpsdvsr > CPSDVR_MAX)) {
+ status = -EINVAL;
dev_err(&spi->dev,
"cpsdvsr is configured incorrectly\n");
goto err_config_params;
unsigned int count, c;
unsigned long base, tx_reg, rx_reg;
int word_len, data_type, element_count;
- int elements;
+ int elements = 0;
u32 l;
u8 * rx;
const u8 * tx;
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
- if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) {
+ bits_per_word = transfer->bits_per_word ? :
+ message->spi->bits_per_word ? : 8;
+ if (bits_per_word % 16 == 0) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = (transfer->len) >> 1;
cr_width = BIT_CTL_WORDSIZE;
drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
- } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) {
+ } else if (bits_per_word % 8 == 0) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = transfer->len;
cr_width = 0;
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
- /* Additional always once-executed workarounds */
- ssb_pcicore_serdes_workaround(pc);
- /* TODO: ASPM */
- /* TODO: Clock Request Update */
+ /* Additional PCIe always once-executed workarounds */
+ if (dev->id.coreid == SSB_DEV_PCIE) {
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
+ }
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
if STAGING
-config STAGING_EXCLUDE_BUILD
- bool "Exclude Staging drivers from being built" if STAGING
- default y
- ---help---
- Are you sure you really want to build the staging drivers?
- They taint your kernel, don't live up to the normal Linux
- kernel quality standards, are a bit crufty around the edges,
- and might go off and kick your dog when you aren't paying
- attention.
-
- Say N here to be able to select and build the Staging drivers.
- This option is primarily here to prevent them from being built
- when selecting 'make allyesconfg' and 'make allmodconfig' so
- don't be all that put off, your dog will be just fine.
-
-if !STAGING_EXCLUDE_BUILD
-
source "drivers/staging/tty/Kconfig"
source "drivers/staging/generic_serial/Kconfig"
source "drivers/staging/nvec/Kconfig"
-endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/slab.h>
-#include <staging/altera.h>
+#include "altera.h"
#include "altera-exprt.h"
#include "altera-jtag.h"
#include <linux/string.h>
#include <linux/firmware.h>
#include <linux/slab.h>
-#include <staging/altera.h>
+#include "altera.h"
#include "altera-exprt.h"
#include "altera-jtag.h"
config ATH6K_LEGACY
tristate "Atheros AR6003 support (non mac80211)"
depends on MMC && WLAN
+ depends on CFG80211
select WIRELESS_EXT
select WEXT_PRIV
help
if(ar->scan_request)
{
/* Translate data to cfg80211 mgmt format */
- wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy);
+ if (ar->arWmi)
+ wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy);
cfg80211_scan_done(ar->scan_request,
((status & A_ECANCELED) || (status & A_EBUSY)) ? true : false);
extern bool wl_iw_conn_status_str(u32 event_type, u32 status,
u32 reason, char *stringBuf, uint buflen);
-uint wl_msg_level = WL_ERROR_VAL;
-
#define MAX_WLIW_IOCTL_LEN 1024
#ifdef CONFIG_WIRELESS_EXT
unsigned long irqflags;
int ret = -ENOMEM;
uint32_t tt_pages;
+ struct drm_connector *connector;
+ struct psb_intel_output *psb_intel_output;
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
if (dev_priv == NULL)
drm_kms_helper_poll_init(dev);
}
- ret = psb_backlight_init(dev);
+ /* Only add backlight support if we have LVDS output */
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ head) {
+ psb_intel_output = to_psb_intel_output(connector);
+
+ switch (psb_intel_output->type) {
+ case INTEL_OUTPUT_LVDS:
+ ret = psb_backlight_init(dev);
+ break;
+ }
+ }
+
if (ret)
return ret;
#if 0
info->screen_size = size;
memset(info->screen_base, 0, size);
+ if (dev_priv->pg->stolen_size) {
+ info->apertures = alloc_apertures(1);
+ if (!info->apertures) {
+ ret = -ENOMEM;
+ goto out_err0;
+ }
+ info->apertures->ranges[0].base = dev->mode_config.fb_base;
+ info->apertures->ranges[0].size = dev_priv->pg->stolen_size;
+ }
+
drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper,
sizes->fb_width, sizes->fb_height);
fill_detail_timing_data(panel_fixed_mode, dvo_timing);
- dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
-
- DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
- drm_mode_debug_printmodeline(panel_fixed_mode);
+ if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) {
+ dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
+ DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
+ drm_mode_debug_printmodeline(panel_fixed_mode);
+ } else {
+ DRM_DEBUG("Ignoring bogus LVDS VBT mode.\n");
+ dev_priv->lvds_vbt = 0;
+ kfree(panel_fixed_mode);
+ }
return;
}
int adis16201_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16201_scan {
ADIS16201_SCAN_SUPPLY,
ADIS16201_SCAN_ACC_X,
ADIS16201_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16201_remove_trigger(struct iio_dev *indio_dev);
int adis16201_probe_trigger(struct iio_dev *indio_dev);
int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16203_scan {
ADIS16203_SCAN_SUPPLY,
ADIS16203_SCAN_AUX_ADC,
ADIS16203_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16203_remove_trigger(struct iio_dev *indio_dev);
int adis16203_probe_trigger(struct iio_dev *indio_dev);
};
static const struct iio_info max518_info = {
- .attrs = &max517_attribute_group,
+ .attrs = &max518_attribute_group,
.driver_module = THIS_MODULE,
};
if (st->variant->flags & ADIS16400_NO_BURST) {
ret = adis16350_spi_read_all(&indio_dev->dev, st->rx);
if (ret < 0)
- return ret;
+ goto err;
for (; i < ring->scan_count; i++)
data[i] = *(s16 *)(st->rx + i*2);
} else {
ret = adis16400_spi_read_burst(&indio_dev->dev, st->rx);
if (ret < 0)
- return ret;
+ goto err;
for (; i < indio_dev->ring->scan_count; i++) {
j = __ffs(mask);
mask &= ~(1 << j);
ring->access->store_to(indio_dev->ring, (u8 *) data, pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
- kfree(data);
+ kfree(data);
return IRQ_HANDLED;
+
+err:
+ kfree(data);
+ return ret;
}
void adis16400_unconfigure_ring(struct iio_dev *indio_dev)
pf->h = h;
pf->thread = thread;
pf->type = type;
+ pf->private_data = private;
return pf;
}
"host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n",
dev->host_hw_state, dev->me_hw_state);
- if (!(dev->host_hw_state & H_RDY) != H_RDY)
+ if (!(dev->host_hw_state & H_RDY))
dev_dbg(&dev->pdev->dev, "host turn off H_RDY.\n");
- if (!(dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA)
+ if (!(dev->me_hw_state & ME_RDY_HRA))
dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n");
printk(KERN_ERR "mei: link layer initialization failed.\n");
tristate "One Laptop Per Child Display CONtroller support"
depends on OLPC && FB
select I2C
+ select BACKLIGHT_CLASS_DEVICE
---help---
Add support for the OLPC XO DCON controller. This controller is
only available on OLPC platforms. Unless you have one of these
retval = sd_send_cmd_get_rsp(chip, IO_SEND_OP_COND, 0, SD_RSP_TYPE_R4, rsp, 5);
if (retval == STATUS_SUCCESS) {
- int func_num = (rsp[1] >> 4) && 0x07;
+ int func_num = (rsp[1] >> 4) & 0x07;
if (func_num) {
RTSX_DEBUGP("SD_IO card (Function number: %d)!\n", func_num);
chip->sd_io = 1;
static int stub_probe(struct usb_interface *interface,
const struct usb_device_id *id);
static void stub_disconnect(struct usb_interface *interface);
+static int stub_pre_reset(struct usb_interface *interface);
+static int stub_post_reset(struct usb_interface *interface);
/*
* Define device IDs here if you want to explicitly limit exportable devices.
.probe = stub_probe,
.disconnect = stub_disconnect,
.id_table = stub_table,
+ .pre_reset = stub_pre_reset,
+ .post_reset = stub_post_reset,
};
/*
del_match_busid((char *)udev_busid);
}
}
+
+/*
+ * Presence of pre_reset and post_reset prevents the driver from being unbound
+ * when the device is being reset
+ */
+
+int stub_pre_reset(struct usb_interface *interface)
+{
+ dev_dbg(&interface->dev, "pre_reset\n");
+ return 0;
+}
+
+int stub_post_reset(struct usb_interface *interface)
+{
+ dev_dbg(&interface->dev, "post_reset\n");
+ return 0;
+}
dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
/*
- * usb_lock_device_for_reset caused a deadlock: it causes the driver
- * to unbind. In the shutdown the rx thread is signalled to shut down
- * but this thread is pending in the usb_lock_device_for_reset.
- *
- * Instead queue the reset.
- *
- * Unfortunatly an existing usbip connection will be dropped due to
- * driver unbinding.
+ * With the implementation of pre_reset and post_reset the driver no
+ * longer unbinds. This allows the use of synchronous reset.
*/
- usb_queue_reset_device(sdev->interface);
+
+ if (usb_lock_device_for_reset(sdev->udev, sdev->interface)<0)
+ {
+ dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
+ return 0;
+ }
+ usb_reset_device(sdev->udev);
+ usb_unlock_device(sdev->udev);
+
return 0;
}
int fifosize, base_baud;
int port_type;
struct pch_uart_driver_data *board;
+ const char *board_name;
board = &drv_dat[id->driver_data];
port_type = board->port_type;
base_baud = 1843200; /* 1.8432MHz */
/* quirk for CM-iTC board */
- if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_name && strstr(board_name, "CM-iTC"))
base_baud = 192000000; /* 192.0MHz */
switch (port_type) {
spin_lock_irqsave(&tty->buf.lock, flags);
if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
- struct tty_buffer *head, *tail = tty->buf.tail;
- int seen_tail = 0;
+ struct tty_buffer *head;
while ((head = tty->buf.head) != NULL) {
int count;
char *char_buf;
if (!count) {
if (head->next == NULL)
break;
- /*
- There's a possibility tty might get new buffer
- added during the unlock window below. We could
- end up spinning in here forever hogging the CPU
- completely. To avoid this let's have a rest each
- time we processed the tail buffer.
- */
- if (tail == head)
- seen_tail = 1;
tty->buf.head = head->next;
tty_buffer_free(tty, head);
continue;
line discipline as we want to empty the queue */
if (test_bit(TTY_FLUSHPENDING, &tty->flags))
break;
- if (!tty->receive_room || seen_tail)
+ if (!tty->receive_room)
break;
if (count > tty->receive_room)
count = tty->receive_room;
{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */
+ { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
data, sizeof(*data), USB_STS_TIMEOUT);
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
data, sizeof(*data), USB_STS_TIMEOUT);
mutex_unlock(&inode->i_mutex);
if (!error)
d_delete(dentry);
- dput(dentry);
return error;
}
endchoice
+# Selected by UDC drivers that support high-speed operation.
config USB_GADGET_DUALSPEED
bool
depends on USB_GADGET
- default n
- help
- Means that gadget drivers should include extra descriptors
- and code to handle dual-speed controllers.
#
# USB Gadget Drivers
#include <linux/device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/system.h>
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
if (!hcd)
return -ENOMEM;
the_controller = hcd_to_dummy (hcd);
+ hcd->has_tt = 1;
retval = usb_add_hcd(hcd, 0, 0);
if (retval != 0) {
/* halt any endpoint by doing a "wrong direction" i/o call */
if (!usb_endpoint_dir_in(&data->desc)) {
- if (usb_endpoint_xfer_isoc(&data->desc))
+ if (usb_endpoint_xfer_isoc(&data->desc)) {
+ mutex_unlock(&data->lock);
return -EINVAL;
+ }
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
if (likely (data->ep != NULL))
}
#ifdef CONFIG_PM
-static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
+static int mv_udc_suspend(struct device *_dev)
{
struct mv_udc *udc = the_controller;
return 0;
}
-static int mv_udc_resume(struct platform_device *_dev)
+static int mv_udc_resume(struct device *_dev)
{
struct mv_udc *udc = the_controller;
int retval;
retval = mv_udc_phy_init(udc->phy_regs);
if (retval) {
dev_err(_dev, "phy initialization error %d\n", retval);
- goto error;
+ return retval;
}
udc_reset(udc);
ep0_reset(udc);
.owner = THIS_MODULE,
.name = "pxa-u2o",
#ifdef CONFIG_PM
- .pm = mv_udc_pm_ops,
+ .pm = &mv_udc_pm_ops,
#endif
},
};
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/io.h>
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
-lubbock_fail0:
goto err_irq_lub;
}
retval = request_irq(LUBBOCK_USB_IRQ,
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_IRQ, retval);
- free_irq(LUBBOCK_USB_DISC_IRQ, dev);
goto lubbock_fail0;
}
} else
return 0;
#ifdef CONFIG_ARCH_LUBBOCK
+lubbock_fail0:
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
err_irq_lub:
-#endif
free_irq(irq, dev);
+#endif
err_irq1:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
writel(0, hsotg->regs + S3C_DAINTMSK);
- dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- readl(hsotg->regs + S3C_DIEPCTL0),
- readl(hsotg->regs + S3C_DOEPCTL0));
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
/* enable in and out endpoint interrupts */
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
udelay(10); /* see openiboot */
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
- dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+ dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
writing to the EPCTL register.. */
s3c_hsotg_enqueue_setup(hsotg);
- dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- readl(hsotg->regs + S3C_DIEPCTL0),
- readl(hsotg->regs + S3C_DOEPCTL0));
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
/* clear global NAKs */
writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
/* setup fifos */
- dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
- readl(hsotg->regs + S3C_GRXFSIZ),
- readl(hsotg->regs + S3C_GNPTXFSIZ));
+ dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(hsotg->regs + S3C_GRXFSIZ),
+ readl(hsotg->regs + S3C_GNPTXFSIZ));
s3c_hsotg_init_fifo(hsotg);
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
{
+#ifdef DEBUG
struct device *dev = hsotg->dev;
void __iomem *regs = hsotg->regs;
u32 val;
dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+#endif
}
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/udc.h>
hsudc->uclk = clk_get(&pdev->dev, "usb-device");
if (IS_ERR(hsudc->uclk)) {
dev_err(dev, "failed to find usb-device clock source\n");
- return PTR_ERR(hsudc->uclk);
+ ret = PTR_ERR(hsudc->uclk);
+ goto err_clk;
}
clk_enable(hsudc->uclk);
disable_irq(hsudc->irq);
local_irq_enable();
return 0;
-
+err_clk:
+ free_irq(hsudc->irq, hsudc);
err_irq:
iounmap(hsudc->regs);
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/prefetch.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
return PTR_ERR(usb_clk);
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
- if (!hcd)
- return -ENOMEM;
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err0;
+ }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
+ err0:
clk_put(usb_clk);
return retval;
}
struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
- case 0:
+ case SLOT_STATE_ENABLED:
return "enabled/disabled";
- case 1:
+ case SLOT_STATE_DEFAULT:
return "default";
- case 2:
+ case SLOT_STATE_ADDRESSED:
return "addressed";
- case 3:
+ case SLOT_STATE_CONFIGURED:
return "configured";
default:
return "reserved";
interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
if (interval != ep->desc.bInterval - 1)
dev_warn(&udev->dev,
- "ep %#x - rounding interval to %d microframes\n",
+ "ep %#x - rounding interval to %d %sframes\n",
ep->desc.bEndpointAddress,
- 1 << interval);
+ 1 << interval,
+ udev->speed == USB_SPEED_FULL ? "" : "micro");
+
+ if (udev->speed == USB_SPEED_FULL) {
+ /*
+ * Full speed isoc endpoints specify interval in frames,
+ * not microframes. We are using microframes everywhere,
+ * so adjust accordingly.
+ */
+ interval += 3; /* 1 frame = 2^3 uframes */
+ }
return interval;
}
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
- pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
- pdev->revision == 0x0) {
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
+ if (pdev->revision == 0x0) {
xhci->quirks |= XHCI_RESET_EP_QUIRK;
xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint\n");
+ }
+ /* Fresco Logic confirms: all revisions of this chip do not
+ * support MSI, even though some of them claim to in their PCI
+ * capabilities.
+ */
+ xhci->quirks |= XHCI_BROKEN_MSI;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+ "has broken MSI implementation\n",
+ pdev->revision);
}
+
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
struct usb_iso_packet_descriptor *frame;
int idx;
- ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
urb_priv = td->urb->hcpriv;
idx = urb_priv->td_cnt;
frame = &td->urb->iso_frame_desc[idx];
free_irq(hcd->irq, hcd);
hcd->irq = -1;
+ /* Some Fresco Logic host controllers advertise MSI, but fail to
+ * generate interrupts. Don't even try to enable MSI.
+ */
+ if (xhci->quirks & XHCI_BROKEN_MSI)
+ goto legacy_irq;
+
ret = xhci_setup_msix(xhci);
if (ret)
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
if (ret) {
+legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
/* Free any rings that were dropped, but not changed. */
for (i = 1; i < 31; ++i) {
- if ((ctrl_ctx->drop_flags & (1 << (i + 1))) &&
- !(ctrl_ctx->add_flags & (1 << (i + 1))))
+ if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+ !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
}
xhci_zero_in_ctx(xhci, virt_dev);
struct xhci_command *reset_device_cmd;
int timeleft;
int last_freed_endpoint;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
if (ret <= 0)
return -EINVAL;
}
+ /* If device is not setup, there is no point in resetting it */
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+ SLOT_STATE_DISABLED)
+ return 0;
+
xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
/* Allocate the command structure that holds the struct completion.
* Assume we're in process context, since the normal device reset
#define SLOT_STATE (0x1f << 27)
#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+#define SLOT_STATE_DISABLED 0
+#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT 1
+#define SLOT_STATE_ADDRESSED 2
+#define SLOT_STATE_CONFIGURED 3
/**
* struct xhci_ep_ctx
* commands.
*/
#define XHCI_EP_LIMIT_QUIRK (1 << 5)
+#define XHCI_BROKEN_MSI (1 << 6)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
#include <linux/init.h>
#include <linux/list.h>
#include <linux/kobject.h>
+#include <linux/prefetch.h>
#include <linux/platform_device.h>
#include <linux/io.h>
{
struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+ kfree(gpriv->uep);
kfree(gpriv);
}
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
*/
#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2
/*
* Linx Technologies product ids
#define ZTE_PRODUCT_AC2726 0xfff5
#define ZTE_PRODUCT_AC8710T 0xffff
-/* ZTE PRODUCTS -- alternate vendor ID */
-#define ZTE_VENDOR_ID2 0x1d6b
-#define ZTE_PRODUCT_MF_330 0x0002
-
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
#define TOSHIBA_PRODUCT_G450 0x0d45
#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_PH300 0x9100
#define ALINK_PRODUCT_3GU 0x9200
/* ALCATEL PRODUCTS */
#define ALCATEL_VENDOR_ID 0x1bbb
-#define ALCATEL_PRODUCT_X060S 0x0000
+#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+/* Zoom */
+#define ZOOM_PRODUCT_4597 0x9607
+
/* Haier products */
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
.reason = OPTION_BLACKLIST_SENDSETUP
};
+static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info alcatel_x200_blacklist = {
+ .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup),
+ .ifaceinfo = alcatel_x200_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 };
+static const struct option_blacklist_info zte_k3765_z_blacklist = {
+ .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup),
+ .ifaceinfo = zte_k3765_z_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+ 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
- { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
- { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
+ .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
+ },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
/* Pirelli */
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},
}
}
+ /*
+ * Some devices don't work or return incorrect data the first
+ * time they get a READ(10) command, or for the first READ(10)
+ * after a media change. If the INITIAL_READ10 flag is set,
+ * keep track of whether READ(10) commands succeed. If the
+ * previous one succeeded and this one failed, set the REDO_READ10
+ * flag to force a retry.
+ */
+ if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+ srb->cmnd[0] == READ_10)) {
+ if (srb->result == SAM_STAT_GOOD) {
+ set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+ clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ }
+
+ /*
+ * Next, if the REDO_READ10 flag is set, return a result
+ * code that will cause the SCSI core to retry the READ(10)
+ * command immediately.
+ */
+ if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+ clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ srb->result = DID_IMM_RETRY << 16;
+ srb->sense_buffer[0] = 0;
+ }
+ }
+
/* Did we transfer less than the minimum amount required? */
if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100,
+ "Feiya",
+ "SD/SDHC Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_READ_DISC_INFO ),
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200,
+ "Corsair",
+ "Padlock v2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
/* Patch by Richard Schütz <r.schtz@t-online.de>
* This external hard drive enclosure uses a JMicron chip which
* needs the US_FL_IGNORE_RESIDUE flag to work properly. */
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
- US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16);
+ US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+ US_FL_INITIAL_READ10);
p = quirks;
while (*p) {
case 'm':
f |= US_FL_MAX_SECTORS_64;
break;
+ case 'n':
+ f |= US_FL_INITIAL_READ10;
+ break;
case 'o':
f |= US_FL_CAPACITY_OK;
break;
if (result)
goto BadDevice;
+ /*
+ * If the device returns invalid data for the first READ(10)
+ * command, indicate the command should be retried.
+ */
+ if (us->fflags & US_FL_INITIAL_READ10)
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
/* Acquire all the other resources and add the host */
result = usb_stor_acquire_resources(us);
if (result)
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
+#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
+#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
#define USB_STOR_STRING_LEN 32
/* We need a flat backing store for the Arc's
less-flat actual paged framebuffer */
- if (!(videomemory = vmalloc(videomemorysize)))
+ videomemory = vzalloc(videomemorysize);
+ if (!videomemory)
return retval;
- memset(videomemory, 0, videomemorysize);
-
info = framebuffer_alloc(sizeof(struct arcfb_par), &dev->dev);
if (!info)
goto err;
static int aty_init(struct fb_info *info);
-#ifdef CONFIG_ATARI
-static int store_video_par(char *videopar, unsigned char m64_num);
-#endif
-
static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
return;
}
+#ifdef CONFIG_PCI
static void aty_bl_exit(struct backlight_device *bd)
{
backlight_device_unregister(bd);
printk("aty: Backlight unloaded\n");
}
+#endif /* CONFIG_PCI */
#endif /* CONFIG_FB_ATY_BACKLIGHT */
return ret;
}
-#ifdef CONFIG_ATARI
+#if defined(CONFIG_ATARI) && !defined(MODULE)
static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
char *p;
phys_vmembase[m64_num] = 0;
return -1;
}
-#endif /* CONFIG_ATARI */
+#endif /* CONFIG_ATARI && !MODULE */
/*
* Blank the display.
To compile this driver as a module, choose M here: the module will
be called adp8860_bl.
+config BACKLIGHT_ADP8870
+ tristate "Backlight Driver for ADP8870 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ If you have a LCD backlight connected to the ADP8870,
+ say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp8870_bl.
+
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
depends on MFD_88PM860X
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
--- /dev/null
+/*
+ * Backlight driver for Analog Devices ADP8870 Backlight Devices
+ *
+ * Copyright 2009-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#include <linux/i2c/adp8870.h>
+#define ADP8870_EXT_FEATURES
+#define ADP8870_USE_LEDS
+
+
+#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */
+#define ADP8870_MDCR 0x01 /* Device mode and status */
+#define ADP8870_INT_STAT 0x02 /* Interrupts status */
+#define ADP8870_INT_EN 0x03 /* Interrupts enable */
+#define ADP8870_CFGR 0x04 /* Configuration register */
+#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */
+#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */
+#define ADP8870_BLOFF 0x07 /* Backlight off timeout */
+#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */
+#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */
+#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */
+#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */
+#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */
+#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */
+#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */
+#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */
+#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */
+#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */
+#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */
+#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */
+#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */
+#define ADP8870_ISCC 0x1B /* Independent sink current control register */
+#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */
+#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */
+#define ADP8870_ISCF 0x1E /* Independent sink current fade register */
+#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */
+#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */
+#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */
+#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */
+#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */
+#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */
+#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */
+#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */
+#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */
+#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */
+#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */
+#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */
+#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */
+#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */
+#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */
+#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */
+#define ADP8870_L2TRP 0x32 /* L2 comparator reference */
+#define ADP8870_L2HYS 0x33 /* L2 hysteresis */
+#define ADP8870_L3TRP 0x34 /* L3 comparator reference */
+#define ADP8870_L3HYS 0x35 /* L3 hysteresis */
+#define ADP8870_L4TRP 0x36 /* L4 comparator reference */
+#define ADP8870_L4HYS 0x37 /* L4 hysteresis */
+#define ADP8870_L5TRP 0x38 /* L5 comparator reference */
+#define ADP8870_L5HYS 0x39 /* L5 hysteresis */
+#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */
+#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */
+#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */
+#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */
+
+#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */
+#define ADP8870_DEVID(x) ((x) & 0xF)
+#define ADP8870_MANID(x) ((x) >> 4)
+
+/* MDCR Device mode and status */
+#define D7ALSEN (1 << 7)
+#define INT_CFG (1 << 6)
+#define NSTBY (1 << 5)
+#define DIM_EN (1 << 4)
+#define GDWN_DIS (1 << 3)
+#define SIS_EN (1 << 2)
+#define CMP_AUTOEN (1 << 1)
+#define BLEN (1 << 0)
+
+/* ADP8870_ALS1_EN Main ALS comparator level enable */
+#define L5_EN (1 << 3)
+#define L4_EN (1 << 2)
+#define L3_EN (1 << 1)
+#define L2_EN (1 << 0)
+
+#define CFGR_BLV_SHIFT 3
+#define CFGR_BLV_MASK 0x7
+#define ADP8870_FLAG_LED_MASK 0xFF
+
+#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
+#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1)
+
+struct adp8870_bl {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct adp8870_led *led;
+ struct adp8870_backlight_platform_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int revid;
+ int current_brightness;
+};
+
+struct adp8870_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct i2c_client *client;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+
+static int adp8870_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret)
+ dev_err(&client->dev, "failed to write\n");
+
+ return ret;
+}
+
+static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && ((reg_val & bit_mask) == 0)) {
+ reg_val |= bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && (reg_val & bit_mask)) {
+ reg_val &= ~bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/*
+ * Independent sink / LED
+ */
+#if defined(ADP8870_USE_LEDS)
+static void adp8870_led_work(struct work_struct *work)
+{
+ struct adp8870_led *led = container_of(work, struct adp8870_led, work);
+ adp8870_write(led->client, ADP8870_ISC1 + led->id - 1,
+ led->new_brightness >> 1);
+}
+
+static void adp8870_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp8870_led *led;
+
+ led = container_of(led_cdev, struct adp8870_led, cdev);
+ led->new_brightness = value;
+ /*
+ * Use workqueue for IO since I2C operations can sleep.
+ */
+ schedule_work(&led->work);
+}
+
+static int adp8870_led_setup(struct adp8870_led *led)
+{
+ struct i2c_client *client = led->client;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1));
+ if (ret)
+ return ret;
+
+ if (led->id > 4)
+ ret = adp8870_set_bits(client, ADP8870_ISCT1,
+ (led->flags & 0x3) << ((led->id - 5) * 2));
+ else
+ ret = adp8870_set_bits(client, ADP8870_ISCT2,
+ (led->flags & 0x3) << ((led->id - 1) * 2));
+
+ return ret;
+}
+
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ struct adp8870_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+
+ led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCT1,
+ (pdata->led_on_time & 0x3) << 6);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCF,
+ FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
+ if (ret)
+ goto err_free;
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK;
+
+ if (led_dat->id > 7 || led_dat->id < 1) {
+ dev_err(&client->dev, "Invalid LED ID %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
+ dev_err(&client->dev, "LED %d used by Backlight\n",
+ led_dat->id);
+ goto err;
+ }
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp8870_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
+ led_dat->client = client;
+ led_dat->new_brightness = LED_OFF;
+ INIT_WORK(&led_dat->work, adp8870_led_work);
+
+ ret = led_classdev_register(&client->dev, &led_dat->cdev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp8870_led_setup(led_dat);
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ data->led = led;
+
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; --i) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&data->led[i].cdev);
+ cancel_work_sync(&data->led[i].work);
+ }
+
+ kfree(data->led);
+ return 0;
+}
+#else
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ return 0;
+}
+#endif
+
+static int adp8870_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ int ret = 0;
+
+ if (data->pdata->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret = adp8870_clr_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l1 sysfs brightness
+ */
+ ret = adp8870_write(client, ADP8870_BLMX1,
+ data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ }
+
+ if (data->current_brightness && brightness == 0)
+ ret = adp8870_set_bits(client,
+ ADP8870_MDCR, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret = adp8870_clr_bits(client,
+ ADP8870_MDCR, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp8870_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp8870_bl_set(bl, brightness);
+}
+
+static int adp8870_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+
+ return data->current_brightness;
+}
+
+static const struct backlight_ops adp8870_bl_ops = {
+ .update_status = adp8870_bl_update_status,
+ .get_brightness = adp8870_bl_get_brightness,
+};
+
+static int adp8870_bl_setup(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ struct adp8870_backlight_platform_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim);
+ if (ret)
+ return ret;
+
+ if (pdata->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret = adp8870_write(client, ADP8870_BLMX2,
+ pdata->l2_bright_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM2,
+ pdata->l2_bright_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX3,
+ pdata->l3_office_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM3,
+ pdata->l3_office_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX4,
+ pdata->l4_indoor_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM4,
+ pdata->l4_indor_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX5,
+ pdata->l5_dark_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM5,
+ pdata->l5_dark_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN |
+ L3_EN | L2_EN);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_CMP_CTL,
+ ALS_CMPR_CFG_VAL(pdata->abml_filt));
+ if (ret)
+ return ret;
+ }
+
+ ret = adp8870_write(client, ADP8870_CFGR,
+ BL_CFGR_VAL(pdata->bl_fade_law, 0));
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in,
+ pdata->bl_fade_out));
+ if (ret)
+ return ret;
+ /*
+ * ADP8870 Rev0 requires GDWN_DIS bit set
+ */
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY |
+ (data->revid == 0 ? GDWN_DIS : 0));
+
+ return ret;
+}
+
+static ssize_t adp8870_show(struct device *dev, char *buf, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, reg, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp8870_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp8870_write(data->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX5);
+}
+
+static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX5);
+}
+static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show,
+ adp8870_bl_l5_dark_max_store);
+
+
+static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX4);
+}
+static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show,
+ adp8870_bl_l4_indoor_max_store);
+
+
+static ssize_t adp8870_bl_l3_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX3);
+}
+
+static ssize_t adp8870_bl_l3_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX3);
+}
+
+static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show,
+ adp8870_bl_l3_office_max_store);
+
+static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX2);
+}
+
+static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX2);
+}
+static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show,
+ adp8870_bl_l2_bright_max_store);
+
+static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ return adp8870_store(dev, buf, count, ADP8870_BLMX1);
+}
+static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show,
+ adp8870_bl_l1_daylight_max_store);
+
+static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM5);
+}
+
+static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM5);
+}
+static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show,
+ adp8870_bl_l5_dark_dim_store);
+
+static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM4);
+}
+static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show,
+ adp8870_bl_l4_indoor_dim_store);
+
+
+static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM3);
+}
+
+static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM3);
+}
+static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show,
+ adp8870_bl_l3_office_dim_store);
+
+static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM2);
+}
+
+static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM2);
+}
+static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show,
+ adp8870_bl_l2_bright_dim_store);
+
+static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM1);
+}
+static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show,
+ adp8870_bl_l1_daylight_dim_store);
+
+#ifdef ADP8870_EXT_FEATURES
+static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+ uint16_t ret_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val);
+ if (error < 0) {
+ mutex_unlock(&data->lock);
+ return error;
+ }
+ ret_val = reg_val;
+ error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ /* Return 13-bit conversion value for the first light sensor */
+ ret_val += (reg_val & 0x1F) << 8;
+
+ return sprintf(buf, "%u\n", ret_val);
+}
+static DEVICE_ATTR(ambient_light_level, 0444,
+ adp8870_bl_ambient_light_level_show, NULL);
+
+static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n",
+ ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
+}
+
+static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ uint8_t reg_val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0) {
+ /* Enable automatic ambient light sensing */
+ adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+ } else if ((val > 0) && (val < 6)) {
+ /* Disable automatic ambient light sensing */
+ adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+
+ /* Set user supplied ambient light zone */
+ mutex_lock(&data->lock);
+ adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
+ reg_val |= (val - 1) << CFGR_BLV_SHIFT;
+ adp8870_write(data->client, ADP8870_CFGR, reg_val);
+ mutex_unlock(&data->lock);
+ }
+
+ return count;
+}
+static DEVICE_ATTR(ambient_light_zone, 0664,
+ adp8870_bl_ambient_light_zone_show,
+ adp8870_bl_ambient_light_zone_store);
+#endif
+
+static struct attribute *adp8870_bl_attributes[] = {
+ &dev_attr_l5_dark_max.attr,
+ &dev_attr_l5_dark_dim.attr,
+ &dev_attr_l4_indoor_max.attr,
+ &dev_attr_l4_indoor_dim.attr,
+ &dev_attr_l3_office_max.attr,
+ &dev_attr_l3_office_dim.attr,
+ &dev_attr_l2_bright_max.attr,
+ &dev_attr_l2_bright_dim.attr,
+ &dev_attr_l1_daylight_max.attr,
+ &dev_attr_l1_daylight_dim.attr,
+#ifdef ADP8870_EXT_FEATURES
+ &dev_attr_ambient_light_level.attr,
+ &dev_attr_ambient_light_zone.attr,
+#endif
+ NULL
+};
+
+static const struct attribute_group adp8870_bl_attr_group = {
+ .attrs = adp8870_bl_attributes,
+};
+
+static int __devinit adp8870_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct backlight_properties props;
+ struct backlight_device *bl;
+ struct adp8870_bl *data;
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ uint8_t reg_val;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ ret = adp8870_read(client, ADP8870_MFDVID, ®_val);
+ if (ret < 0)
+ return -EIO;
+
+ if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) {
+ dev_err(&client->dev, "failed to probe\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->revid = ADP8870_DEVID(reg_val);
+ data->client = client;
+ data->pdata = pdata;
+ data->id = id->driver_data;
+ data->current_brightness = 0;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ memset(&props, 0, sizeof(props));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS;
+ bl = backlight_device_register(dev_driver_string(&client->dev),
+ &client->dev, data, &adp8870_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto out2;
+ }
+
+ data->bl = bl;
+
+ if (pdata->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ if (ret) {
+ dev_err(&client->dev, "failed to register sysfs\n");
+ goto out1;
+ }
+
+ ret = adp8870_bl_setup(bl);
+ if (ret) {
+ ret = -EIO;
+ goto out;
+ }
+
+ backlight_update_status(bl);
+
+ dev_info(&client->dev, "Rev.%d Backlight\n", data->revid);
+
+ if (pdata->num_leds)
+ adp8870_led_probe(client);
+
+ return 0;
+
+out:
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+out1:
+ backlight_device_unregister(bl);
+out2:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit adp8870_remove(struct i2c_client *client)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ if (data->led)
+ adp8870_led_remove(client);
+
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ backlight_device_unregister(data->bl);
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+
+static int adp8870_i2c_resume(struct i2c_client *client)
+{
+ adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+#else
+#define adp8870_i2c_suspend NULL
+#define adp8870_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id adp8870_id[] = {
+ { "adp8870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp8870_id);
+
+static struct i2c_driver adp8870_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp8870_probe,
+ .remove = __devexit_p(adp8870_remove),
+ .suspend = adp8870_i2c_suspend,
+ .resume = adp8870_i2c_resume,
+ .id_table = adp8870_id,
+};
+
+static int __init adp8870_init(void)
+{
+ return i2c_add_driver(&adp8870_driver);
+}
+module_init(adp8870_init);
+
+static void __exit adp8870_exit(void)
+{
+ i2c_del_driver(&adp8870_driver);
+}
+module_exit(adp8870_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP8870 Backlight driver");
+MODULE_ALIAS("platform:adp8870-backlight");
i2c_add_driver(&ad5280_driver);
memset(&props, 0, sizeof(props));
+ props.type = BACKLIGHT_RAW;
props.max_brightness = MAX_BRIGHENESS;
bl_dev = backlight_device_register("bf537-bl", NULL, NULL,
&bfin_lq035fb_bl_ops, &props);
videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE);
- videomemory = vmalloc(videomemorysize);
+ videomemory = vzalloc(videomemorysize);
if (!videomemory)
goto err_fb_rel;
- memset(videomemory, 0, videomemorysize);
-
info->screen_base = (char *)videomemory;
info->fbops = &broadsheetfb_ops;
#include <linux/pci.h>
#include <video/vga.h>
+static bool request_mem_succeeded = false;
+
static struct fb_var_screeninfo efifb_defined __devinitdata = {
.activate = FB_ACTIVATE_NOW,
.height = -1,
{
if (info->screen_base)
iounmap(info->screen_base);
- release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
+ if (request_mem_succeeded)
+ release_mem_region(info->apertures->ranges[0].base,
+ info->apertures->ranges[0].size);
framebuffer_release(info);
}
return 0;
}
-static int __devinit efifb_probe(struct platform_device *dev)
+static int __init efifb_probe(struct platform_device *dev)
{
struct fb_info *info;
int err;
unsigned int size_vmode;
unsigned int size_remap;
unsigned int size_total;
- int request_succeeded = 0;
if (!screen_info.lfb_depth)
screen_info.lfb_depth = 32;
efifb_fix.smem_len = size_remap;
if (request_mem_region(efifb_fix.smem_start, size_remap, "efifb")) {
- request_succeeded = 1;
+ request_mem_succeeded = true;
} else {
/* We cannot make this fatal. Sometimes this comes from magic
spaces our resource handlers simply don't know about */
info->apertures->ranges[0].base = efifb_fix.smem_start;
info->apertures->ranges[0].size = size_remap;
- info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
+ info->screen_base = ioremap_wc(efifb_fix.smem_start, efifb_fix.smem_len);
if (!info->screen_base) {
printk(KERN_ERR "efifb: abort, cannot ioremap video memory "
"0x%x @ 0x%lx\n",
err_release_fb:
framebuffer_release(info);
err_release_mem:
- if (request_succeeded)
+ if (request_mem_succeeded)
release_mem_region(efifb_fix.smem_start, size_total);
return err;
}
static struct platform_driver efifb_driver = {
- .probe = efifb_probe,
.driver = {
.name = "efifb",
},
if (!screen_info.lfb_linelength)
return -ENODEV;
- ret = platform_driver_register(&efifb_driver);
+ ret = platform_device_register(&efifb_device);
+ if (ret)
+ return ret;
- if (!ret) {
- ret = platform_device_register(&efifb_device);
- if (ret)
- platform_driver_unregister(&efifb_driver);
+ /*
+ * This is not just an optimization. We will interfere
+ * with a real driver if we get reprobed, so don't allow
+ * it.
+ */
+ ret = platform_driver_probe(&efifb_driver, efifb_probe);
+ if (ret) {
+ platform_device_unregister(&efifb_device);
+ return ret;
}
+
return ret;
}
module_init(efifb_init);
videomemorysize = (DPY_W*DPY_H)/8;
- if (!(videomemory = vmalloc(videomemorysize)))
+ videomemory = vzalloc(videomemorysize);
+ if (!videomemory)
return retval;
- memset(videomemory, 0, videomemorysize);
-
info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev);
if (!info)
goto err_fballoc;
dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
fbi->map_dma);
failed_map:
- clk_put(fbi->clk);
-failed_getclock:
iounmap(fbi->regs);
failed_ioremap:
+ clk_put(fbi->clk);
+failed_getclock:
release_mem_region(res->start, resource_size(res));
failed_req:
kfree(info->pseudo_palette);
/* we need to add a spare page because our csum caching scheme walks
* to the end of the page */
videomemorysize = PAGE_SIZE + (fw * fh);
- videomemory = vmalloc(videomemorysize);
+ videomemory = vzalloc(videomemorysize);
if (!videomemory)
goto err_fb_rel;
- memset(videomemory, 0, videomemorysize);
-
info->screen_base = (char __force __iomem *)videomemory;
info->fbops = &metronomefb_ops;
EXPORT_SYMBOL(fb_find_nearest_mode);
EXPORT_SYMBOL(fb_videomode_to_modelist);
EXPORT_SYMBOL(fb_find_mode);
+EXPORT_SYMBOL(fb_find_mode_cvt);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no IO memory defined\n");
- return -ENOENT;
+ ret = -ENOENT;
+ goto failed_put_clk;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no IRQ defined\n");
- return -ENOENT;
+ ret = -ENOENT;
+ goto failed_put_clk;
}
info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
if (info == NULL) {
- clk_put(clk);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto failed_put_clk;
}
/* Initialize private data */
fbi->reg_base = ioremap_nocache(res->start, resource_size(res));
if (fbi->reg_base == NULL) {
ret = -ENOMEM;
- goto failed;
+ goto failed_free_info;
}
/*
&fbi->fb_start_dma, GFP_KERNEL);
if (info->screen_base == NULL) {
ret = -ENOMEM;
- goto failed;
+ goto failed_free_info;
}
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
failed_free_fbmem:
dma_free_coherent(fbi->dev, info->fix.smem_len,
info->screen_base, fbi->fb_start_dma);
-failed:
+failed_free_info:
kfree(info);
+failed_put_clk:
clk_put(clk);
dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
- struct s3c_fb_pd_win *windata = win->windata;
struct s3c_fb *sfb = win->parent;
dev_dbg(sfb->dev, "checking parameters\n");
- var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres);
- var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres);
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) {
dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
vidosd_set_alpha(win, alpha);
vidosd_set_size(win, data);
+ /* Enable DMA channel for this window */
+ if (sfb->variant.has_shadowcon) {
+ data = readl(sfb->regs + SHADOWCON);
+ data |= SHADOWCON_CHx_ENABLE(win_no);
+ writel(data, sfb->regs + SHADOWCON);
+ }
+
data = WINCONx_ENWIN;
/* note, since we have to round up the bits-per-pixel, we end up
writel(data, regs + sfb->variant.wincon + (win_no * 4));
writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
- /* Enable DMA channel for this window */
- if (sfb->variant.has_shadowcon) {
- data = readl(sfb->regs + SHADOWCON);
- data |= SHADOWCON_CHx_ENABLE(win_no);
- writel(data, sfb->regs + SHADOWCON);
- }
-
shadow_protect_win(win, 0);
return 0;
release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
- kfree(sfb);
-
pm_runtime_put_sync(sfb->dev);
pm_runtime_disable(sfb->dev);
+ kfree(sfb);
return 0;
}
&info->modelist);
#endif
info->var = savagefb_var800x600x8;
+ /* if a panel was detected, default to a CVT mode instead */
+ if (par->SavagePanelWidth) {
+ struct fb_videomode cvt_mode;
+
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
+ cvt_mode.xres = par->SavagePanelWidth;
+ cvt_mode.yres = par->SavagePanelHeight;
+ cvt_mode.refresh = 60;
+ /* FIXME: if we know there is only the panel
+ * we can enable reduced blanking as well */
+ if (fb_find_mode_cvt(&cvt_mode, 0, 0))
+ printk(KERN_WARNING "No CVT mode found for panel\n");
+ else if (fb_find_mode(&info->var, info, NULL, NULL, 0,
+ &cvt_mode, 0) != 3)
+ info->var = savagefb_var800x600x8;
+ }
if (mode_option) {
fb_find_mode(&info->var, info, mode_option,
struct fb_info *info = hdmi->info;
unsigned long parent_rate = 0, hdmi_rate;
- /* A device has been plugged in */
- pm_runtime_get_sync(hdmi->dev);
-
ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate);
- if (ret < 0) {
- pm_runtime_put(hdmi->dev);
+ if (ret < 0)
goto out;
- }
hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
/* Reconfigure the clock */
ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate);
- if (ret < 0) {
- pm_runtime_put(hdmi->dev);
+ if (ret < 0)
goto out;
- }
msleep(10);
sh_hdmi_configure(hdmi);
fb_set_suspend(hdmi->info, 1);
console_unlock();
- pm_runtime_put(hdmi->dev);
}
out:
INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
/* Product and revision IDs are 0 in sh-mobile version */
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
ecodec:
free_irq(irq, hdmi);
ereqirq:
- pm_runtime_suspend(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
iounmap(hdmi->base);
emap:
free_irq(irq, hdmi);
/* Wait for already scheduled work */
cancel_delayed_work_sync(&hdmi->edid_work);
- pm_runtime_suspend(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable(hdmi->hdmi_clk);
clk_put(hdmi->hdmi_clk);
unsigned long tmp;
int bpp = 0;
unsigned long ldddsr;
- int k, m;
+ int k, m, ret;
/* enable clocks before accessing the hardware */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->setup_sys) {
- int ret = board_cfg->setup_sys(board_cfg->board_data,
+ ret = board_cfg->setup_sys(board_cfg->board_data,
ch, &sh_mobile_lcdc_sys_bus_ops);
if (ret)
return ret;
static void vga16fb_destroy(struct fb_info *info)
{
+ struct platform_device *dev = container_of(info->device, struct platform_device, dev);
iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
/* XXX unshare VGA regions */
+ platform_set_drvdata(dev, NULL);
framebuffer_release(info);
}
spin_lock_init(&info->dirty_lock);
spin_lock_init(&info->resize_lock);
- info->fb = vmalloc(fb_size);
+ info->fb = vzalloc(fb_size);
if (info->fb == NULL)
goto error_nomem;
- memset(info->fb, 0, fb_size);
info->nr_pages = (fb_size + PAGE_SIZE - 1) >> PAGE_SHIFT;
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1
+ depends on W1 && GENERIC_HARDIRQS
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
static void xen_irq_init(unsigned irq)
{
struct irq_info *info;
+#ifdef CONFIG_SMP
struct irq_desc *desc = irq_to_desc(irq);
-#ifdef CONFIG_SMP
/* By default all event channels notify CPU#0. */
cpumask_copy(desc->irq_data.affinity, cpumask_of(0));
#endif
*
* Note: We don't assign an event channel until the irq actually started
* up. Return an existing irq if we've already got one for the gsi.
+ *
+ * Shareable implies level triggered, not shareable implies edge
+ * triggered here.
*/
int xen_bind_pirq_gsi_to_irq(unsigned gsi,
unsigned pirq, int shareable, char *name)
pirq_query_unmask(irq);
/* We try to use the handler with the appropriate semantic for the
- * type of interrupt: if the interrupt doesn't need an eoi
- * (pirq_needs_eoi returns false), we treat it like an edge
- * triggered interrupt so we use handle_edge_irq.
- * As a matter of fact this only happens when the corresponding
- * physical interrupt is edge triggered or an msi.
+ * type of interrupt: if the interrupt is an edge triggered
+ * interrupt we use handle_edge_irq.
*
- * On the other hand if the interrupt needs an eoi (pirq_needs_eoi
- * returns true) we treat it like a level triggered interrupt so we
- * use handle_fasteoi_irq like the native code does for this kind of
+ * On the other hand if the interrupt is level triggered we use
+ * handle_fasteoi_irq like the native code does for this kind of
* interrupts.
+ *
* Depending on the Xen version, pirq_needs_eoi might return true
* not only for level triggered interrupts but for edge triggered
* interrupts too. In any case Xen always honors the eoi mechanism,
* hasn't received an eoi yet. Therefore using the fasteoi handler
* is the right choice either way.
*/
- if (pirq_needs_eoi(irq))
+ if (shareable)
irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
handle_fasteoi_irq, name);
else
{
unsigned long bytes;
int rc;
-
- xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT);
- xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE);
+ unsigned long nr_tbl;
+
+ nr_tbl = swioltb_nr_tbl();
+ if (nr_tbl)
+ xen_io_tlb_nslabs = nr_tbl;
+ else {
+ xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT);
+ xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE);
+ }
bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
success:
d_add(dentry, inode);
- _leave(" = 0 { vn=%u u=%u } -> { ino=%lu v=%llu }",
+ _leave(" = 0 { vn=%u u=%u } -> { ino=%lu v=%u }",
fid.vnode,
fid.unique,
dentry->d_inode->i_ino,
- (unsigned long long)dentry->d_inode->i_version);
+ dentry->d_inode->i_generation);
return NULL;
}
* been deleted and replaced, and the original vnode ID has
* been reused */
if (fid.unique != vnode->fid.unique) {
- _debug("%s: file deleted (uq %u -> %u I:%llu)",
+ _debug("%s: file deleted (uq %u -> %u I:%u)",
dentry->d_name.name, fid.unique,
vnode->fid.unique,
- (unsigned long long)dentry->d_inode->i_version);
+ dentry->d_inode->i_generation);
spin_lock(&vnode->lock);
set_bit(AFS_VNODE_DELETED, &vnode->flags);
spin_unlock(&vnode->lock);
i_size_write(&vnode->vfs_inode, size);
vnode->vfs_inode.i_uid = status->owner;
vnode->vfs_inode.i_gid = status->group;
- vnode->vfs_inode.i_version = vnode->fid.unique;
+ vnode->vfs_inode.i_generation = vnode->fid.unique;
vnode->vfs_inode.i_nlink = status->nlink;
mode = vnode->vfs_inode.i_mode;
vnode->vfs_inode.i_ctime.tv_sec = status->mtime_server;
vnode->vfs_inode.i_mtime = vnode->vfs_inode.i_ctime;
vnode->vfs_inode.i_atime = vnode->vfs_inode.i_ctime;
+ vnode->vfs_inode.i_version = data_version;
}
expected_version = status->data_version;
inode->i_ctime.tv_nsec = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime;
inode->i_blocks = 0;
- inode->i_version = vnode->fid.unique;
+ inode->i_generation = vnode->fid.unique;
+ inode->i_version = vnode->status.data_version;
inode->i_mapping->a_ops = &afs_fs_aops;
/* check to see whether a symbolic link is really a mountpoint */
struct afs_iget_data *data = opaque;
return inode->i_ino == data->fid.vnode &&
- inode->i_version == data->fid.unique;
+ inode->i_generation == data->fid.unique;
}
/*
struct afs_vnode *vnode = AFS_FS_I(inode);
inode->i_ino = data->fid.vnode;
- inode->i_version = data->fid.unique;
+ inode->i_generation = data->fid.unique;
vnode->fid = data->fid;
vnode->volume = data->volume;
inode = dentry->d_inode;
- _enter("{ ino=%lu v=%llu }", inode->i_ino,
- (unsigned long long)inode->i_version);
+ _enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation);
generic_fillattr(inode, stat);
return 0;
static void afs_i_init_once(void *foo);
static struct dentry *afs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data);
+static void afs_kill_super(struct super_block *sb);
static struct inode *afs_alloc_inode(struct super_block *sb);
-static void afs_put_super(struct super_block *sb);
static void afs_destroy_inode(struct inode *inode);
static int afs_statfs(struct dentry *dentry, struct kstatfs *buf);
.owner = THIS_MODULE,
.name = "afs",
.mount = afs_mount,
- .kill_sb = kill_anon_super,
+ .kill_sb = afs_kill_super,
.fs_flags = 0,
};
.drop_inode = afs_drop_inode,
.destroy_inode = afs_destroy_inode,
.evict_inode = afs_evict_inode,
- .put_super = afs_put_super,
.show_options = generic_show_options,
};
*/
static int afs_test_super(struct super_block *sb, void *data)
{
- struct afs_mount_params *params = data;
+ struct afs_super_info *as1 = data;
struct afs_super_info *as = sb->s_fs_info;
- return as->volume == params->volume;
+ return as->volume == as1->volume;
+}
+
+static int afs_set_super(struct super_block *sb, void *data)
+{
+ sb->s_fs_info = data;
+ return set_anon_super(sb, NULL);
}
/*
* fill in the superblock
*/
-static int afs_fill_super(struct super_block *sb, void *data)
+static int afs_fill_super(struct super_block *sb,
+ struct afs_mount_params *params)
{
- struct afs_mount_params *params = data;
- struct afs_super_info *as = NULL;
+ struct afs_super_info *as = sb->s_fs_info;
struct afs_fid fid;
struct dentry *root = NULL;
struct inode *inode = NULL;
_enter("");
- /* allocate a superblock info record */
- as = kzalloc(sizeof(struct afs_super_info), GFP_KERNEL);
- if (!as) {
- _leave(" = -ENOMEM");
- return -ENOMEM;
- }
-
- afs_get_volume(params->volume);
- as->volume = params->volume;
-
/* fill in the superblock */
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
sb->s_magic = AFS_FS_MAGIC;
sb->s_op = &afs_super_ops;
- sb->s_fs_info = as;
sb->s_bdi = &as->volume->bdi;
+ strlcpy(sb->s_id, as->volume->vlocation->vldb.name, sizeof(sb->s_id));
/* allocate the root inode and dentry */
fid.vid = as->volume->vid;
fid.unique = 1;
inode = afs_iget(sb, params->key, &fid, NULL, NULL);
if (IS_ERR(inode))
- goto error_inode;
+ return PTR_ERR(inode);
if (params->autocell)
set_bit(AFS_VNODE_AUTOCELL, &AFS_FS_I(inode)->flags);
_leave(" = 0");
return 0;
-error_inode:
- ret = PTR_ERR(inode);
- inode = NULL;
error:
iput(inode);
- afs_put_volume(as->volume);
- kfree(as);
-
- sb->s_fs_info = NULL;
-
_leave(" = %d", ret);
return ret;
}
struct afs_volume *vol;
struct key *key;
char *new_opts = kstrdup(options, GFP_KERNEL);
+ struct afs_super_info *as;
int ret;
_enter(",,%s,%p", dev_name, options);
ret = PTR_ERR(vol);
goto error;
}
- params.volume = vol;
+
+ /* allocate a superblock info record */
+ as = kzalloc(sizeof(struct afs_super_info), GFP_KERNEL);
+ if (!as) {
+ ret = -ENOMEM;
+ afs_put_volume(vol);
+ goto error;
+ }
+ as->volume = vol;
/* allocate a deviceless superblock */
- sb = sget(fs_type, afs_test_super, set_anon_super, ¶ms);
+ sb = sget(fs_type, afs_test_super, afs_set_super, as);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
+ afs_put_volume(vol);
+ kfree(as);
goto error;
}
} else {
_debug("reuse");
ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
+ afs_put_volume(vol);
+ kfree(as);
}
- afs_put_volume(params.volume);
afs_put_cell(params.cell);
kfree(new_opts);
_leave(" = 0 [%p]", sb);
return dget(sb->s_root);
error:
- afs_put_volume(params.volume);
afs_put_cell(params.cell);
key_put(params.key);
kfree(new_opts);
return ERR_PTR(ret);
}
-/*
- * finish the unmounting process on the superblock
- */
-static void afs_put_super(struct super_block *sb)
+static void afs_kill_super(struct super_block *sb)
{
struct afs_super_info *as = sb->s_fs_info;
-
- _enter("");
-
+ kill_anon_super(sb);
afs_put_volume(as->volume);
-
- _leave("");
+ kfree(as);
}
/*
* partly or wholly fill a page that's under preparation for writing
*/
static int afs_fill_page(struct afs_vnode *vnode, struct key *key,
- loff_t pos, unsigned len, struct page *page)
+ loff_t pos, struct page *page)
{
loff_t i_size;
- unsigned eof;
int ret;
+ int len;
- _enter(",,%llu,%u", (unsigned long long)pos, len);
-
- ASSERTCMP(len, <=, PAGE_CACHE_SIZE);
+ _enter(",,%llu", (unsigned long long)pos);
i_size = i_size_read(&vnode->vfs_inode);
- if (pos + len > i_size)
- eof = i_size;
+ if (pos + PAGE_CACHE_SIZE > i_size)
+ len = i_size - pos;
else
- eof = PAGE_CACHE_SIZE;
+ len = PAGE_CACHE_SIZE;
- ret = afs_vnode_fetch_data(vnode, key, 0, eof, page);
+ ret = afs_vnode_fetch_data(vnode, key, pos, len, page);
if (ret < 0) {
if (ret == -ENOENT) {
_debug("got NOENT from server"
*pagep = page;
/* page won't leak in error case: it eventually gets cleaned off LRU */
- if (!PageUptodate(page)) {
- _debug("not up to date");
- ret = afs_fill_page(vnode, key, pos, len, page);
+ if (!PageUptodate(page) && len != PAGE_CACHE_SIZE) {
+ ret = afs_fill_page(vnode, key, index << PAGE_CACHE_SHIFT, page);
if (ret < 0) {
kfree(candidate);
_leave(" = %d [prep]", ret);
static int bad_inode_permission(struct inode *inode, int mask, unsigned int flags)
{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
return -EIO;
}
u32 nr;
u32 blocksize;
u32 nscan = 0;
+ bool map = true;
if (level != 1)
return;
nritems = btrfs_header_nritems(node);
nr = slot;
+ if (node->map_token || path->skip_locking)
+ map = false;
+
while (1) {
- if (!node->map_token) {
+ if (map && !node->map_token) {
unsigned long offset = btrfs_node_key_ptr_offset(nr);
map_private_extent_buffer(node, offset,
sizeof(struct btrfs_key_ptr),
if ((search <= target && target - search <= 65536) ||
(search > target && search - target <= 65536)) {
gen = btrfs_node_ptr_generation(node, nr);
- if (node->map_token) {
+ if (map && node->map_token) {
unmap_extent_buffer(node, node->map_token,
KM_USER1);
node->map_token = NULL;
if ((nread > 65536 || nscan > 32))
break;
}
- if (node->map_token) {
+ if (map && node->map_token) {
unmap_extent_buffer(node, node->map_token, KM_USER1);
node->map_token = NULL;
}
struct srcu_struct subvol_srcu;
spinlock_t trans_lock;
+ /*
+ * the reloc mutex goes with the trans lock, it is taken
+ * during commit to protect us from the relocation code
+ */
+ struct mutex reloc_mutex;
+
struct list_head trans_list;
struct list_head hashers;
struct list_head dead_roots;
u32 type;
u64 highest_objectid;
+
+ /* btrfs_record_root_in_trans is a multi-step process,
+ * and it can race with the balancing code. But the
+ * race is very small, and only the first time the root
+ * is added to each transaction. So in_trans_setup
+ * is used to tell us when more checks are required
+ */
+ unsigned long in_trans_setup;
int ref_cows;
int track_dirty;
int in_radix;
struct btrfs_key defrag_max;
int defrag_running;
char *name;
- int in_sysfs;
/* the dirty list is only used by non-reference counted roots */
struct list_head dirty_list;
item->data_len = data_len;
item->ins_or_del = 0;
item->bytes_reserved = 0;
- item->block_rsv = NULL;
item->delayed_node = NULL;
atomic_set(&item->refs, 1);
}
num_bytes = btrfs_calc_trans_metadata_size(root, 1);
ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
- if (!ret) {
+ if (!ret)
item->bytes_reserved = num_bytes;
- item->block_rsv = dst_rsv;
- }
return ret;
}
static void btrfs_delayed_item_release_metadata(struct btrfs_root *root,
struct btrfs_delayed_item *item)
{
+ struct btrfs_block_rsv *rsv;
+
if (!item->bytes_reserved)
return;
- btrfs_block_rsv_release(root, item->block_rsv,
+ rsv = &root->fs_info->global_block_rsv;
+ btrfs_block_rsv_release(root, rsv,
item->bytes_reserved);
}
struct btrfs_delayed_root *delayed_root;
struct btrfs_delayed_node *curr_node, *prev_node;
struct btrfs_path *path;
+ struct btrfs_block_rsv *block_rsv;
int ret = 0;
path = btrfs_alloc_path();
return -ENOMEM;
path->leave_spinning = 1;
+ block_rsv = trans->block_rsv;
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+
delayed_root = btrfs_get_delayed_root(root);
curr_node = btrfs_first_delayed_node(delayed_root);
}
btrfs_free_path(path);
+ trans->block_rsv = block_rsv;
return ret;
}
struct btrfs_delayed_node *node)
{
struct btrfs_path *path;
+ struct btrfs_block_rsv *block_rsv;
int ret;
path = btrfs_alloc_path();
return -ENOMEM;
path->leave_spinning = 1;
+ block_rsv = trans->block_rsv;
+ trans->block_rsv = &node->root->fs_info->global_block_rsv;
+
ret = btrfs_insert_delayed_items(trans, path, node->root, node);
if (!ret)
ret = btrfs_delete_delayed_items(trans, path, node->root, node);
ret = btrfs_update_delayed_inode(trans, node->root, path, node);
btrfs_free_path(path);
+ trans->block_rsv = block_rsv;
return ret;
}
struct btrfs_path *path;
struct btrfs_delayed_node *delayed_node = NULL;
struct btrfs_root *root;
+ struct btrfs_block_rsv *block_rsv;
unsigned long nr = 0;
int need_requeue = 0;
int ret;
if (IS_ERR(trans))
goto free_path;
+ block_rsv = trans->block_rsv;
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+
ret = btrfs_insert_delayed_items(trans, path, root, delayed_node);
if (!ret)
ret = btrfs_delete_delayed_items(trans, path, root,
nr = trans->blocks_used;
+ trans->block_rsv = block_rsv;
btrfs_end_transaction_dmeta(trans, root);
__btrfs_btree_balance_dirty(root, nr);
free_path:
return 0;
}
+void btrfs_assert_delayed_root_empty(struct btrfs_root *root)
+{
+ struct btrfs_delayed_root *delayed_root;
+ delayed_root = btrfs_get_delayed_root(root);
+ WARN_ON(btrfs_first_delayed_node(delayed_root));
+}
+
void btrfs_balance_delayed_items(struct btrfs_root *root)
{
struct btrfs_delayed_root *delayed_root;
struct list_head tree_list; /* used for batch insert/delete items */
struct list_head readdir_list; /* used for readdir items */
u64 bytes_reserved;
- struct btrfs_block_rsv *block_rsv;
struct btrfs_delayed_node *delayed_node;
atomic_t refs;
int ins_or_del;
/* for init */
int __init btrfs_delayed_inode_init(void);
void btrfs_delayed_inode_exit(void);
+
+/* for debugging */
+void btrfs_assert_delayed_root_empty(struct btrfs_root *root);
+
#endif
root->last_trans = 0;
root->highest_objectid = 0;
root->name = NULL;
- root->in_sysfs = 0;
root->inode_tree = RB_ROOT;
INIT_RADIX_TREE(&root->delayed_nodes_tree, GFP_ATOMIC);
root->block_rsv = NULL;
return root;
root->free_ino_ctl = kzalloc(sizeof(*root->free_ino_ctl), GFP_NOFS);
- if (!root->free_ino_ctl)
- goto fail;
root->free_ino_pinned = kzalloc(sizeof(*root->free_ino_pinned),
GFP_NOFS);
- if (!root->free_ino_pinned)
+ if (!root->free_ino_pinned || !root->free_ino_ctl) {
+ ret = -ENOMEM;
goto fail;
+ }
btrfs_init_free_ino_ctl(root);
mutex_init(&root->fs_commit_mutex);
spin_lock_init(&root->cache_lock);
init_waitqueue_head(&root->cache_wait);
- set_anon_super(&root->anon_super, NULL);
+ ret = set_anon_super(&root->anon_super, NULL);
+ if (ret)
+ goto fail;
if (btrfs_root_refs(&root->root_item) == 0) {
ret = -ENOENT;
spin_lock_init(&fs_info->fs_roots_radix_lock);
spin_lock_init(&fs_info->delayed_iput_lock);
spin_lock_init(&fs_info->defrag_inodes_lock);
+ mutex_init(&fs_info->reloc_mutex);
init_completion(&fs_info->kobj_unregister);
fs_info->tree_root = tree_root;
init_waitqueue_head(&fs_info->scrub_pause_wait);
init_rwsem(&fs_info->scrub_super_lock);
fs_info->scrub_workers_refcnt = 0;
- btrfs_init_workers(&fs_info->scrub_workers, "scrub",
- fs_info->thread_pool_size, &fs_info->generic_worker);
sb->s_blocksize = 4096;
sb->s_blocksize_bits = blksize_bits(4096);
INIT_LIST_HEAD(&splice);
- list_splice_init(&root->fs_info->delalloc_inodes, &splice);
-
spin_lock(&root->fs_info->delalloc_lock);
+ list_splice_init(&root->fs_info->delalloc_inodes, &splice);
while (!list_empty(&splice)) {
btrfs_inode = list_entry(splice.next, struct btrfs_inode,
}
goto again;
}
+
+ /*
+ * If we have less pinned bytes than we want to allocate then
+ * don't bother committing the transaction, it won't help us.
+ */
+ if (data_sinfo->bytes_pinned < bytes)
+ committed = 1;
spin_unlock(&data_sinfo->lock);
/* commit the current transaction and try again */
if (reserved == 0)
return 0;
- /* nothing to shrink - nothing to reclaim */
- if (root->fs_info->delalloc_bytes == 0)
- return 0;
-
max_reclaim = min(reserved, to_reclaim);
while (loops < 1024) {
* LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
* again
*/
- if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
- (found_uncached_bg || empty_size || empty_cluster ||
- allowed_chunk_alloc)) {
+ if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE) {
index = 0;
if (loop == LOOP_FIND_IDEAL && found_uncached_bg) {
found_uncached_bg = false;
goto search;
}
- if (loop < LOOP_CACHING_WAIT) {
- loop++;
- goto search;
- }
+ loop++;
if (loop == LOOP_ALLOC_CHUNK) {
- empty_size = 0;
- empty_cluster = 0;
- }
+ if (allowed_chunk_alloc) {
+ ret = do_chunk_alloc(trans, root, num_bytes +
+ 2 * 1024 * 1024, data,
+ CHUNK_ALLOC_LIMITED);
+ allowed_chunk_alloc = 0;
+ if (ret == 1)
+ done_chunk_alloc = 1;
+ } else if (!done_chunk_alloc &&
+ space_info->force_alloc ==
+ CHUNK_ALLOC_NO_FORCE) {
+ space_info->force_alloc = CHUNK_ALLOC_LIMITED;
+ }
- if (allowed_chunk_alloc) {
- ret = do_chunk_alloc(trans, root, num_bytes +
- 2 * 1024 * 1024, data,
- CHUNK_ALLOC_LIMITED);
- allowed_chunk_alloc = 0;
- done_chunk_alloc = 1;
- } else if (!done_chunk_alloc &&
- space_info->force_alloc == CHUNK_ALLOC_NO_FORCE) {
- space_info->force_alloc = CHUNK_ALLOC_LIMITED;
+ /*
+ * We didn't allocate a chunk, go ahead and drop the
+ * empty size and loop again.
+ */
+ if (!done_chunk_alloc)
+ loop = LOOP_NO_EMPTY_SIZE;
}
- if (loop < LOOP_NO_EMPTY_SIZE) {
- loop++;
- goto search;
+ if (loop == LOOP_NO_EMPTY_SIZE) {
+ empty_size = 0;
+ empty_cluster = 0;
}
- ret = -ENOSPC;
+
+ goto search;
} else if (!ins->objectid) {
ret = -ENOSPC;
} else if (ins->objectid) {
unsigned long map_len;
struct page *first_page;
unsigned long bflags;
- atomic_t refs;
struct list_head leak_list;
struct rcu_head rcu_head;
+ atomic_t refs;
/* the spinlock is used to protect most operations */
spinlock_t lock;
pgoff_t index = 0;
unsigned long first_page_offset;
int num_checksums;
- int ret = 0, ret2;
+ int ret = 0;
INIT_LIST_HEAD(&bitmaps);
goto free_cache;
}
spin_lock(&ctl->tree_lock);
- ret2 = link_free_space(ctl, e);
+ ret = link_free_space(ctl, e);
ctl->total_bitmaps++;
ctl->op->recalc_thresholds(ctl);
spin_unlock(&ctl->tree_lock);
- list_add_tail(&e->list, &bitmaps);
if (ret) {
printk(KERN_ERR "Duplicate entries in "
"free space cache, dumping\n");
page_cache_release(page);
goto free_cache;
}
+ list_add_tail(&e->list, &bitmaps);
}
num_entries--;
return 0;
}
+static u64 add_bytes_to_bitmap(struct btrfs_free_space_ctl *ctl,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ u64 bytes_to_set = 0;
+ u64 end;
+
+ end = info->offset + (u64)(BITS_PER_BITMAP * ctl->unit);
+
+ bytes_to_set = min(end - offset, bytes);
+
+ bitmap_set_bits(ctl, info, offset, bytes_to_set);
+
+ return bytes_to_set;
+
+}
+
static bool use_bitmap(struct btrfs_free_space_ctl *ctl,
struct btrfs_free_space *info)
{
return true;
}
+static struct btrfs_free_space_op free_space_op = {
+ .recalc_thresholds = recalculate_thresholds,
+ .use_bitmap = use_bitmap,
+};
+
static int insert_into_bitmap(struct btrfs_free_space_ctl *ctl,
struct btrfs_free_space *info)
{
struct btrfs_free_space *bitmap_info;
+ struct btrfs_block_group_cache *block_group = NULL;
int added = 0;
- u64 bytes, offset, end;
+ u64 bytes, offset, bytes_added;
int ret;
bytes = info->bytes;
if (!ctl->op->use_bitmap(ctl, info))
return 0;
+ if (ctl->op == &free_space_op)
+ block_group = ctl->private;
again:
+ /*
+ * Since we link bitmaps right into the cluster we need to see if we
+ * have a cluster here, and if so and it has our bitmap we need to add
+ * the free space to that bitmap.
+ */
+ if (block_group && !list_empty(&block_group->cluster_list)) {
+ struct btrfs_free_cluster *cluster;
+ struct rb_node *node;
+ struct btrfs_free_space *entry;
+
+ cluster = list_entry(block_group->cluster_list.next,
+ struct btrfs_free_cluster,
+ block_group_list);
+ spin_lock(&cluster->lock);
+ node = rb_first(&cluster->root);
+ if (!node) {
+ spin_unlock(&cluster->lock);
+ goto no_cluster_bitmap;
+ }
+
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ if (!entry->bitmap) {
+ spin_unlock(&cluster->lock);
+ goto no_cluster_bitmap;
+ }
+
+ if (entry->offset == offset_to_bitmap(ctl, offset)) {
+ bytes_added = add_bytes_to_bitmap(ctl, entry,
+ offset, bytes);
+ bytes -= bytes_added;
+ offset += bytes_added;
+ }
+ spin_unlock(&cluster->lock);
+ if (!bytes) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+no_cluster_bitmap:
bitmap_info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset),
1, 0);
if (!bitmap_info) {
goto new_bitmap;
}
- end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit);
-
- if (offset >= bitmap_info->offset && offset + bytes > end) {
- bitmap_set_bits(ctl, bitmap_info, offset, end - offset);
- bytes -= end - offset;
- offset = end;
- added = 0;
- } else if (offset >= bitmap_info->offset && offset + bytes <= end) {
- bitmap_set_bits(ctl, bitmap_info, offset, bytes);
- bytes = 0;
- } else {
- BUG();
- }
+ bytes_added = add_bytes_to_bitmap(ctl, bitmap_info, offset, bytes);
+ bytes -= bytes_added;
+ offset += bytes_added;
+ added = 0;
if (!bytes) {
ret = 1;
"\n", count);
}
-static struct btrfs_free_space_op free_space_op = {
- .recalc_thresholds = recalculate_thresholds,
- .use_bitmap = use_bitmap,
-};
-
void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
/*
* This searches the block group for just extents to fill the cluster with.
*/
-static int setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group,
- struct btrfs_free_cluster *cluster,
- u64 offset, u64 bytes, u64 min_bytes)
+static noinline int
+setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ struct list_head *bitmaps, u64 offset, u64 bytes,
+ u64 min_bytes)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *first = NULL;
* extent entry.
*/
while (entry->bitmap) {
+ if (list_empty(&entry->list))
+ list_add_tail(&entry->list, bitmaps);
node = rb_next(&entry->offset_index);
if (!node)
return -ENOSPC;
return -ENOSPC;
entry = rb_entry(node, struct btrfs_free_space, offset_index);
- if (entry->bitmap)
+ if (entry->bitmap) {
+ if (list_empty(&entry->list))
+ list_add_tail(&entry->list, bitmaps);
continue;
+ }
+
/*
* we haven't filled the empty size and the window is
* very large. reset and try again
* This specifically looks for bitmaps that may work in the cluster, we assume
* that we have already failed to find extents that will work.
*/
-static int setup_cluster_bitmap(struct btrfs_block_group_cache *block_group,
- struct btrfs_free_cluster *cluster,
- u64 offset, u64 bytes, u64 min_bytes)
+static noinline int
+setup_cluster_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ struct list_head *bitmaps, u64 offset, u64 bytes,
+ u64 min_bytes)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *entry;
if (ctl->total_bitmaps == 0)
return -ENOSPC;
+ /*
+ * First check our cached list of bitmaps and see if there is an entry
+ * here that will work.
+ */
+ list_for_each_entry(entry, bitmaps, list) {
+ if (entry->bytes < min_bytes)
+ continue;
+ ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset,
+ bytes, min_bytes);
+ if (!ret)
+ return 0;
+ }
+
+ /*
+ * If we do have entries on our list and we are here then we didn't find
+ * anything, so go ahead and get the next entry after the last entry in
+ * this list and start the search from there.
+ */
+ if (!list_empty(bitmaps)) {
+ entry = list_entry(bitmaps->prev, struct btrfs_free_space,
+ list);
+ node = rb_next(&entry->offset_index);
+ if (!node)
+ return -ENOSPC;
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ goto search;
+ }
+
entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1);
if (!entry)
return -ENOSPC;
+search:
node = &entry->offset_index;
do {
entry = rb_entry(node, struct btrfs_free_space, offset_index);
u64 offset, u64 bytes, u64 empty_size)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
+ struct list_head bitmaps;
+ struct btrfs_free_space *entry, *tmp;
u64 min_bytes;
int ret;
goto out;
}
- ret = setup_cluster_no_bitmap(block_group, cluster, offset, bytes,
- min_bytes);
+ INIT_LIST_HEAD(&bitmaps);
+ ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset,
+ bytes, min_bytes);
if (ret)
- ret = setup_cluster_bitmap(block_group, cluster, offset,
- bytes, min_bytes);
+ ret = setup_cluster_bitmap(block_group, cluster, &bitmaps,
+ offset, bytes, min_bytes);
+
+ /* Clear our temporary list */
+ list_for_each_entry_safe(entry, tmp, &bitmaps, list)
+ list_del_init(&entry->list);
if (!ret) {
atomic_inc(&block_group->count);
}
if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
- return 0;
+ goto good;
if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1, NULL)) {
ret = btrfs_update_inode(trans, root, dir);
BUG_ON(ret);
+ btrfs_free_path(path);
return 0;
}
btrfs_i_size_write(inode, 0);
while (1) {
- trans = btrfs_start_transaction(root, 0);
+ trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
trans->block_rsv = root->orphan_block_rsv;
ret = btrfs_snap_reserve_metadata(trans, pending_snapshot);
BUG_ON(ret);
+ spin_lock(&root->fs_info->trans_lock);
list_add(&pending_snapshot->list,
&trans->transaction->pending_snapshots);
+ spin_unlock(&root->fs_info->trans_lock);
if (async_transid) {
*async_transid = trans->transid;
ret = btrfs_commit_transaction_async(trans,
static long btrfs_ioctl_fs_info(struct btrfs_root *root, void __user *arg)
{
- struct btrfs_ioctl_fs_info_args fi_args;
+ struct btrfs_ioctl_fs_info_args *fi_args;
struct btrfs_device *device;
struct btrfs_device *next;
struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
+ int ret = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- fi_args.num_devices = fs_devices->num_devices;
- fi_args.max_id = 0;
- memcpy(&fi_args.fsid, root->fs_info->fsid, sizeof(fi_args.fsid));
+ fi_args = kzalloc(sizeof(*fi_args), GFP_KERNEL);
+ if (!fi_args)
+ return -ENOMEM;
+
+ fi_args->num_devices = fs_devices->num_devices;
+ memcpy(&fi_args->fsid, root->fs_info->fsid, sizeof(fi_args->fsid));
mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
- if (device->devid > fi_args.max_id)
- fi_args.max_id = device->devid;
+ if (device->devid > fi_args->max_id)
+ fi_args->max_id = device->devid;
}
mutex_unlock(&fs_devices->device_list_mutex);
- if (copy_to_user(arg, &fi_args, sizeof(fi_args)))
- return -EFAULT;
+ if (copy_to_user(arg, fi_args, sizeof(*fi_args)))
+ ret = -EFAULT;
- return 0;
+ kfree(fi_args);
+ return ret;
}
static long btrfs_ioctl_dev_info(struct btrfs_root *root, void __user *arg)
int ret;
if (!root->reloc_root)
- return 0;
+ goto out;
reloc_root = root->reloc_root;
root_item = &reloc_root->root_item;
ret = btrfs_update_root(trans, root->fs_info->tree_root,
&reloc_root->root_key, root_item);
BUG_ON(ret);
+
+out:
return 0;
}
u64 num_bytes = 0;
int ret;
- spin_lock(&root->fs_info->trans_lock);
+ mutex_lock(&root->fs_info->reloc_mutex);
rc->merging_rsv_size += root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2;
rc->merging_rsv_size += rc->nodes_relocated * 2;
- spin_unlock(&root->fs_info->trans_lock);
+ mutex_unlock(&root->fs_info->reloc_mutex);
+
again:
if (!err) {
num_bytes = rc->merging_rsv_size;
int ret;
again:
root = rc->extent_root;
- spin_lock(&root->fs_info->trans_lock);
+
+ /*
+ * this serializes us with btrfs_record_root_in_transaction,
+ * we have to make sure nobody is in the middle of
+ * adding their roots to the list while we are
+ * doing this splice
+ */
+ mutex_lock(&root->fs_info->reloc_mutex);
list_splice_init(&rc->reloc_roots, &reloc_roots);
- spin_unlock(&root->fs_info->trans_lock);
+ mutex_unlock(&root->fs_info->reloc_mutex);
while (!list_empty(&reloc_roots)) {
found = 1;
static void set_reloc_control(struct reloc_control *rc)
{
struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
- spin_lock(&fs_info->trans_lock);
+
+ mutex_lock(&fs_info->reloc_mutex);
fs_info->reloc_ctl = rc;
- spin_unlock(&fs_info->trans_lock);
+ mutex_unlock(&fs_info->reloc_mutex);
}
static void unset_reloc_control(struct reloc_control *rc)
{
struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
- spin_lock(&fs_info->trans_lock);
+
+ mutex_lock(&fs_info->reloc_mutex);
fs_info->reloc_ctl = NULL;
- spin_unlock(&fs_info->trans_lock);
+ mutex_unlock(&fs_info->reloc_mutex);
}
static int check_extent_flags(u64 flags)
* Boston, MA 021110-1307, USA.
*/
-#include <linux/sched.h>
-#include <linux/pagemap.h>
-#include <linux/writeback.h>
#include <linux/blkdev.h>
-#include <linux/rbtree.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
#include "ctree.h"
#include "volumes.h"
#include "disk-io.h"
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
-
- l = path->nodes[0];
- slot = path->slots[0];
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid != logical) {
- ret = btrfs_previous_item(root, path, 0,
- BTRFS_EXTENT_ITEM_KEY);
- if (ret < 0)
- goto out;
- }
+ goto out_noplug;
+ /*
+ * we might miss half an extent here, but that doesn't matter,
+ * as it's only the prefetch
+ */
while (1) {
l = path->nodes[0];
slot = path->slots[0];
if (ret == 0)
continue;
if (ret < 0)
- goto out;
+ goto out_noplug;
break;
}
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
goto out;
-
- l = path->nodes[0];
- slot = path->slots[0];
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid != logical) {
+ if (ret > 0) {
ret = btrfs_previous_item(root, path, 0,
BTRFS_EXTENT_ITEM_KEY);
if (ret < 0)
goto out;
+ if (ret > 0) {
+ /* there's no smaller item, so stick with the
+ * larger one */
+ btrfs_release_path(path);
+ ret = btrfs_search_slot(NULL, root, &key,
+ path, 0, 0);
+ if (ret < 0)
+ goto out;
+ }
}
while (1) {
out:
blk_finish_plug(&plug);
+out_noplug:
btrfs_free_path(path);
return ret < 0 ? ret : 0;
}
while (1) {
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
- ret = 0;
+ break;
+ if (ret > 0) {
+ if (path->slots[0] >=
+ btrfs_header_nritems(path->nodes[0])) {
+ ret = btrfs_next_leaf(root, path);
+ if (ret)
+ break;
+ }
+ }
l = path->nodes[0];
slot = path->slots[0];
if (found_key.objectid != sdev->dev->devid)
break;
- if (btrfs_key_type(&key) != BTRFS_DEV_EXTENT_KEY)
+ if (btrfs_key_type(&found_key) != BTRFS_DEV_EXTENT_KEY)
break;
if (found_key.offset >= end)
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
if (!cache) {
ret = -ENOENT;
- goto out;
+ break;
}
ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
chunk_offset, length);
btrfs_release_path(path);
}
-out:
btrfs_free_path(path);
- return ret;
+
+ /*
+ * ret can still be 1 from search_slot or next_leaf,
+ * that's not an error
+ */
+ return ret < 0 ? ret : 0;
}
static noinline_for_stack int scrub_supers(struct scrub_dev *sdev)
struct btrfs_fs_info *fs_info = root->fs_info;
mutex_lock(&fs_info->scrub_lock);
- if (fs_info->scrub_workers_refcnt == 0)
+ if (fs_info->scrub_workers_refcnt == 0) {
+ btrfs_init_workers(&fs_info->scrub_workers, "scrub",
+ fs_info->thread_pool_size, &fs_info->generic_worker);
+ fs_info->scrub_workers.idle_thresh = 4;
btrfs_start_workers(&fs_info->scrub_workers, 1);
+ }
++fs_info->scrub_workers_refcnt;
mutex_unlock(&fs_info->scrub_lock);
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags;
+ s->s_flags = flags | MS_NOSEC;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
error = btrfs_fill_super(s, fs_devices, data,
flags & MS_SILENT ? 1 : 0);
#include "disk-io.h"
#include "transaction.h"
-static ssize_t root_blocks_used_show(struct btrfs_root *root, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_root_used(&root->root_item));
-}
-
-static ssize_t root_block_limit_show(struct btrfs_root *root, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_root_limit(&root->root_item));
-}
-
-static ssize_t super_blocks_used_show(struct btrfs_fs_info *fs, char *buf)
-{
-
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_super_bytes_used(&fs->super_copy));
-}
-
-static ssize_t super_total_blocks_show(struct btrfs_fs_info *fs, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_super_total_bytes(&fs->super_copy));
-}
-
-static ssize_t super_blocksize_show(struct btrfs_fs_info *fs, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_super_sectorsize(&fs->super_copy));
-}
-
-/* this is for root attrs (subvols/snapshots) */
-struct btrfs_root_attr {
- struct attribute attr;
- ssize_t (*show)(struct btrfs_root *, char *);
- ssize_t (*store)(struct btrfs_root *, const char *, size_t);
-};
-
-#define ROOT_ATTR(name, mode, show, store) \
-static struct btrfs_root_attr btrfs_root_attr_##name = __ATTR(name, mode, \
- show, store)
-
-ROOT_ATTR(blocks_used, 0444, root_blocks_used_show, NULL);
-ROOT_ATTR(block_limit, 0644, root_block_limit_show, NULL);
-
-static struct attribute *btrfs_root_attrs[] = {
- &btrfs_root_attr_blocks_used.attr,
- &btrfs_root_attr_block_limit.attr,
- NULL,
-};
-
-/* this is for super attrs (actual full fs) */
-struct btrfs_super_attr {
- struct attribute attr;
- ssize_t (*show)(struct btrfs_fs_info *, char *);
- ssize_t (*store)(struct btrfs_fs_info *, const char *, size_t);
-};
-
-#define SUPER_ATTR(name, mode, show, store) \
-static struct btrfs_super_attr btrfs_super_attr_##name = __ATTR(name, mode, \
- show, store)
-
-SUPER_ATTR(blocks_used, 0444, super_blocks_used_show, NULL);
-SUPER_ATTR(total_blocks, 0444, super_total_blocks_show, NULL);
-SUPER_ATTR(blocksize, 0444, super_blocksize_show, NULL);
-
-static struct attribute *btrfs_super_attrs[] = {
- &btrfs_super_attr_blocks_used.attr,
- &btrfs_super_attr_total_blocks.attr,
- &btrfs_super_attr_blocksize.attr,
- NULL,
-};
-
-static ssize_t btrfs_super_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info,
- super_kobj);
- struct btrfs_super_attr *a = container_of(attr,
- struct btrfs_super_attr,
- attr);
-
- return a->show ? a->show(fs, buf) : 0;
-}
-
-static ssize_t btrfs_super_attr_store(struct kobject *kobj,
- struct attribute *attr,
- const char *buf, size_t len)
-{
- struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info,
- super_kobj);
- struct btrfs_super_attr *a = container_of(attr,
- struct btrfs_super_attr,
- attr);
-
- return a->store ? a->store(fs, buf, len) : 0;
-}
-
-static ssize_t btrfs_root_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct btrfs_root *root = container_of(kobj, struct btrfs_root,
- root_kobj);
- struct btrfs_root_attr *a = container_of(attr,
- struct btrfs_root_attr,
- attr);
-
- return a->show ? a->show(root, buf) : 0;
-}
-
-static ssize_t btrfs_root_attr_store(struct kobject *kobj,
- struct attribute *attr,
- const char *buf, size_t len)
-{
- struct btrfs_root *root = container_of(kobj, struct btrfs_root,
- root_kobj);
- struct btrfs_root_attr *a = container_of(attr,
- struct btrfs_root_attr,
- attr);
- return a->store ? a->store(root, buf, len) : 0;
-}
-
-static void btrfs_super_release(struct kobject *kobj)
-{
- struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info,
- super_kobj);
- complete(&fs->kobj_unregister);
-}
-
-static void btrfs_root_release(struct kobject *kobj)
-{
- struct btrfs_root *root = container_of(kobj, struct btrfs_root,
- root_kobj);
- complete(&root->kobj_unregister);
-}
-
-static const struct sysfs_ops btrfs_super_attr_ops = {
- .show = btrfs_super_attr_show,
- .store = btrfs_super_attr_store,
-};
-
-static const struct sysfs_ops btrfs_root_attr_ops = {
- .show = btrfs_root_attr_show,
- .store = btrfs_root_attr_store,
-};
-
/* /sys/fs/btrfs/ entry */
static struct kset *btrfs_kset;
* to make sure the old root from before we joined the transaction is deleted
* when the transaction commits
*/
-int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+static int record_root_in_trans(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
if (root->ref_cows && root->last_trans < trans->transid) {
WARN_ON(root == root->fs_info->extent_root);
WARN_ON(root->commit_root != root->node);
+ /*
+ * see below for in_trans_setup usage rules
+ * we have the reloc mutex held now, so there
+ * is only one writer in this function
+ */
+ root->in_trans_setup = 1;
+
+ /* make sure readers find in_trans_setup before
+ * they find our root->last_trans update
+ */
+ smp_wmb();
+
spin_lock(&root->fs_info->fs_roots_radix_lock);
if (root->last_trans == trans->transid) {
spin_unlock(&root->fs_info->fs_roots_radix_lock);
return 0;
}
- root->last_trans = trans->transid;
radix_tree_tag_set(&root->fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
spin_unlock(&root->fs_info->fs_roots_radix_lock);
+ root->last_trans = trans->transid;
+
+ /* this is pretty tricky. We don't want to
+ * take the relocation lock in btrfs_record_root_in_trans
+ * unless we're really doing the first setup for this root in
+ * this transaction.
+ *
+ * Normally we'd use root->last_trans as a flag to decide
+ * if we want to take the expensive mutex.
+ *
+ * But, we have to set root->last_trans before we
+ * init the relocation root, otherwise, we trip over warnings
+ * in ctree.c. The solution used here is to flag ourselves
+ * with root->in_trans_setup. When this is 1, we're still
+ * fixing up the reloc trees and everyone must wait.
+ *
+ * When this is zero, they can trust root->last_trans and fly
+ * through btrfs_record_root_in_trans without having to take the
+ * lock. smp_wmb() makes sure that all the writes above are
+ * done before we pop in the zero below
+ */
btrfs_init_reloc_root(trans, root);
+ smp_wmb();
+ root->in_trans_setup = 0;
}
return 0;
}
+
+int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ if (!root->ref_cows)
+ return 0;
+
+ /*
+ * see record_root_in_trans for comments about in_trans_setup usage
+ * and barriers
+ */
+ smp_rmb();
+ if (root->last_trans == trans->transid &&
+ !root->in_trans_setup)
+ return 0;
+
+ mutex_lock(&root->fs_info->reloc_mutex);
+ record_root_in_trans(trans, root);
+ mutex_unlock(&root->fs_info->reloc_mutex);
+
+ return 0;
+}
+
/* wait for commit against the current transaction to become unblocked
* when this is done, it is safe to start a new transaction, but the current
* transaction might not be fully on disk.
list) {
if (t->in_commit) {
if (t->commit_done)
- goto out;
+ break;
cur_trans = t;
atomic_inc(&cur_trans->use_count);
break;
parent = dget_parent(dentry);
parent_inode = parent->d_inode;
parent_root = BTRFS_I(parent_inode)->root;
- btrfs_record_root_in_trans(trans, parent_root);
+ record_root_in_trans(trans, parent_root);
/*
* insert the directory item
ret = btrfs_update_inode(trans, parent_root, parent_inode);
BUG_ON(ret);
- btrfs_record_root_in_trans(trans, root);
+ /*
+ * pull in the delayed directory update
+ * and the delayed inode item
+ * otherwise we corrupt the FS during
+ * snapshot
+ */
+ ret = btrfs_run_delayed_items(trans, root);
+ BUG_ON(ret);
+
+ record_root_in_trans(trans, root);
btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
btrfs_check_and_init_root_item(new_root_item);
int ret;
list_for_each_entry(pending, head, list) {
- /*
- * We must deal with the delayed items before creating
- * snapshots, or we will create a snapthot with inconsistent
- * information.
- */
- ret = btrfs_run_delayed_items(trans, fs_info->fs_root);
- BUG_ON(ret);
-
ret = create_pending_snapshot(trans, fs_info, pending);
BUG_ON(ret);
}
wait_current_trans_commit_start_and_unblock(root, cur_trans);
else
wait_current_trans_commit_start(root, cur_trans);
- put_transaction(cur_trans);
+ if (current->journal_info == trans)
+ current->journal_info = NULL;
+
+ put_transaction(cur_trans);
return 0;
}
schedule_timeout(1);
finish_wait(&cur_trans->writer_wait, &wait);
- spin_lock(&root->fs_info->trans_lock);
- root->fs_info->trans_no_join = 1;
- spin_unlock(&root->fs_info->trans_lock);
} while (atomic_read(&cur_trans->num_writers) > 1 ||
(should_grow && cur_trans->num_joined != joined));
- ret = create_pending_snapshots(trans, root->fs_info);
- BUG_ON(ret);
+ /*
+ * Ok now we need to make sure to block out any other joins while we
+ * commit the transaction. We could have started a join before setting
+ * no_join so make sure to wait for num_writers to == 1 again.
+ */
+ spin_lock(&root->fs_info->trans_lock);
+ root->fs_info->trans_no_join = 1;
+ spin_unlock(&root->fs_info->trans_lock);
+ wait_event(cur_trans->writer_wait,
+ atomic_read(&cur_trans->num_writers) == 1);
+
+ /*
+ * the reloc mutex makes sure that we stop
+ * the balancing code from coming in and moving
+ * extents around in the middle of the commit
+ */
+ mutex_lock(&root->fs_info->reloc_mutex);
ret = btrfs_run_delayed_items(trans, root);
BUG_ON(ret);
+ ret = create_pending_snapshots(trans, root->fs_info);
+ BUG_ON(ret);
+
ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
BUG_ON(ret);
+ /*
+ * make sure none of the code above managed to slip in a
+ * delayed item
+ */
+ btrfs_assert_delayed_root_empty(root);
+
WARN_ON(cur_trans != trans->transaction);
btrfs_scrub_pause(root);
root->fs_info->running_transaction = NULL;
root->fs_info->trans_no_join = 0;
spin_unlock(&root->fs_info->trans_lock);
+ mutex_unlock(&root->fs_info->reloc_mutex);
wake_up(&root->fs_info->transaction_wait);
tmp_key.offset = (u64)-1;
wc.replay_dest = btrfs_read_fs_root_no_name(fs_info, &tmp_key);
- BUG_ON(!wc.replay_dest);
+ BUG_ON(IS_ERR_OR_NULL(wc.replay_dest));
wc.replay_dest->log_root = log;
btrfs_record_root_in_trans(trans, wc.replay_dest);
transid = btrfs_super_generation(disk_super);
if (disk_super->label[0])
printk(KERN_INFO "device label %s ", disk_super->label);
- else {
- /* FIXME, make a readl uuid parser */
- printk(KERN_INFO "device fsid %llx-%llx ",
- *(unsigned long long *)disk_super->fsid,
- *(unsigned long long *)(disk_super->fsid + 8));
- }
+ else
+ printk(KERN_INFO "device fsid %pU ", disk_super->fsid);
printk(KERN_CONT "devid %llu transid %llu %s\n",
(unsigned long long)devid, (unsigned long long)transid, path);
ret = device_list_add(path, disk_super, devid, fs_devices_ret);
if (!buffer_uptodate(*wait_bh))
err = -EIO;
}
- if (unlikely(err)) {
+ if (unlikely(err))
page_zero_new_buffers(page, from, to);
- ClearPageUptodate(page);
- }
return err;
}
EXPORT_SYMBOL(__block_write_begin);
int err;
struct inode *inode = page->mapping->host;
BUG_ON(!inode);
- igrab(inode);
+ ihold(inode);
err = writepage_nounlock(page, wbc);
unlock_page(page);
iput(inode);
while (!list_empty(&mdsc->cap_dirty)) {
ci = list_first_entry(&mdsc->cap_dirty, struct ceph_inode_info,
i_dirty_item);
- inode = igrab(&ci->vfs_inode);
+ inode = &ci->vfs_inode;
+ ihold(inode);
dout("flush_dirty_caps %p\n", inode);
spin_unlock(&mdsc->cap_dirty_lock);
- if (inode) {
- ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH,
- NULL);
- iput(inode);
- }
+ ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH, NULL);
+ iput(inode);
spin_lock(&mdsc->cap_dirty_lock);
}
spin_unlock(&mdsc->cap_dirty_lock);
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_dentry = dget(filp->f_dentry);
/* hints to request -> mds selection code */
req->r_direct_mode = USE_AUTH_MDS;
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
- if (err)
+ if (err) {
d_drop(dentry);
- else if (!req->r_reply_info.head->is_dentry)
- d_instantiate(dentry, igrab(old_dentry->d_inode));
+ } else if (!req->r_reply_info.head->is_dentry) {
+ ihold(old_dentry->d_inode);
+ d_instantiate(dentry, old_dentry->d_inode);
+ }
ceph_mdsc_put_request(req);
return err;
}
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode)
- igrab(inode);
+ ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(-ESTALE);
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode)
- igrab(inode);
+ ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(err ? err : -ESTALE);
err = PTR_ERR(req);
goto out;
}
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, parent_inode, req);
if (!err)
static int striped_read(struct inode *inode,
u64 off, u64 len,
struct page **pages, int num_pages,
- int *checkeof, bool align_to_pages,
+ int *checkeof, bool o_direct,
unsigned long buf_align)
{
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
io_align = off & ~PAGE_MASK;
more:
- if (align_to_pages)
+ if (o_direct)
page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
else
page_align = pos & ~PAGE_MASK;
ci->i_truncate_seq,
ci->i_truncate_size,
page_pos, pages_left, page_align);
- hit_stripe = this_len < left;
- was_short = ret >= 0 && ret < this_len;
if (ret == -ENOENT)
ret = 0;
+ hit_stripe = this_len < left;
+ was_short = ret >= 0 && ret < this_len;
dout("striped_read %llu~%u (read %u) got %d%s%s\n", pos, left, read,
ret, hit_stripe ? " HITSTRIPE" : "", was_short ? " SHORT" : "");
}
if (was_short) {
- /* was original extent fully inside i_size? */
- if (pos + left <= inode->i_size) {
- dout("zero tail\n");
- ceph_zero_page_vector_range(page_off + read, len - read,
+ /* did we bounce off eof? */
+ if (pos + left > inode->i_size)
+ *checkeof = 1;
+
+ /* zero trailing bytes (inside i_size) */
+ if (left > 0 && pos < inode->i_size) {
+ if (pos + left > inode->i_size)
+ left = inode->i_size - pos;
+
+ dout("zero tail %d\n", left);
+ ceph_zero_page_vector_range(page_off + read, left,
pages);
- read = len;
- goto out;
+ read += left;
}
-
- /* check i_size */
- *checkeof = 1;
}
-out:
if (ret >= 0)
ret = read;
dout("striped_read returns %d\n", ret);
/* hit EOF or hole? */
if (statret == 0 && *ppos < inode->i_size) {
- dout("aio_read sync_read hit hole, reading more\n");
+ dout("aio_read sync_read hit hole, ppos %lld < size %lld, reading more\n", *ppos, inode->i_size);
read += ret;
base += ret;
len -= ret;
goto done;
}
req->r_dentry = dn; /* may have spliced */
- igrab(in);
+ ihold(in);
} else if (ceph_ino(in) == vino.ino &&
ceph_snap(in) == vino.snap) {
- igrab(in);
+ ihold(in);
} else {
dout(" %p links to %p %llx.%llx, not %llx.%llx\n",
dn, in, ceph_ino(in), ceph_snap(in),
goto done;
}
req->r_dentry = dn; /* may have spliced */
- igrab(in);
+ ihold(in);
rinfo->head->is_dentry = 1; /* fool notrace handlers */
}
if (queue_work(ceph_inode_to_client(inode)->wb_wq,
&ceph_inode(inode)->i_wb_work)) {
dout("ceph_queue_writeback %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_writeback %p failed\n", inode);
}
if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
&ceph_inode(inode)->i_pg_inv_work)) {
dout("ceph_queue_invalidate %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_invalidate %p failed\n", inode);
}
if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
&ci->i_vmtruncate_work)) {
dout("ceph_queue_vmtruncate %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
inode, ci->i_truncate_pending);
__mark_inode_dirty(inode, inode_dirty_flags);
if (mask) {
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = release;
req->r_args.setattr.mask = cpu_to_le32(mask);
req->r_num_caps = 1;
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_num_caps = 1;
req->r_args.getattr.mask = cpu_to_le32(mask);
err = ceph_mdsc_do_request(mdsc, NULL, req);
USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_EXCL;
req->r_args.setlayout.layout.fl_stripe_unit =
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_args.setlayout.layout.fl_stripe_unit =
cpu_to_le32(l.stripe_unit);
req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
/* mds requires start and length rather than start and end */
if (LLONG_MAX == fl->fl_end)
length = fl->fl_end - fl->fl_start + 1;
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d", (int)lock_type,
+ "length: %llu, wait: %d, type: %d", (int)lock_type,
(int)operation, (u64)fl->fl_pid, fl->fl_start,
length, wait, fl->fl_type);
-
req->r_args.filelock_change.rule = lock_type;
req->r_args.filelock_change.type = cmd;
req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
}
ceph_mdsc_put_request(req);
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+ "length: %llu, wait: %d, type: %d, err code %d", (int)lock_type,
(int)operation, (u64)fl->fl_pid, fl->fl_start,
length, wait, fl->fl_type, err);
return err;
dout("mds locked, locking locally");
err = posix_lock_file(file, fl, NULL);
if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
- /* undo! This should only happen if the kernel detects
- * local deadlock. */
+ /* undo! This should only happen if
+ * the kernel detects local
+ * deadlock. */
ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
CEPH_LOCK_UNLOCK, 0, fl);
- dout("got %d on posix_lock_file, undid lock", err);
+ dout("got %d on posix_lock_file, undid lock",
+ err);
}
}
- } else {
- dout("mds returned error code %d", err);
+ } else if (err == -ERESTARTSYS) {
+ dout("undoing lock\n");
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ CEPH_LOCK_UNLOCK, 0, fl);
}
return err;
}
file, CEPH_LOCK_UNLOCK, 0, fl);
dout("got %d on flock_lock_file_wait, undid lock", err);
}
- } else {
- dout("mds error code %d", err);
+ } else if (err == -ERESTARTSYS) {
+ dout("undoing lock\n");
+ ceph_lock_message(CEPH_LOCK_FLOCK,
+ CEPH_MDS_OP_SETFILELOCK,
+ file, CEPH_LOCK_UNLOCK, 0, fl);
}
return err;
}
ci = list_first_entry(&mdsc->snap_flush_list,
struct ceph_inode_info, i_snap_flush_item);
inode = &ci->vfs_inode;
- igrab(inode);
+ ihold(inode);
spin_unlock(&mdsc->snap_flush_lock);
spin_lock(&inode->i_lock);
__ceph_flush_snaps(ci, &session, 0);
err = PTR_ERR(req);
goto out;
}
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
req->r_num_caps = 1;
req->r_args.setxattr.flags = cpu_to_le32(flags);
USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
req->r_num_caps = 1;
req->r_path2 = kstrdup(name, GFP_NOFS);
select CRYPTO_MD5
select CRYPTO_HMAC
select CRYPTO_ARC4
+ select CRYPTO_ECB
select CRYPTO_DES
help
This is the client VFS module for the Common Internet File System
config CIFS_ACL
bool "Provide CIFS ACL support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && CIFS_XATTR
+ depends on EXPERIMENTAL && CIFS_XATTR && KEYS
help
Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
is handed over to the application/caller.
break;
default:
- cERROR(1, "CIFS: Unknown network family '%d'", sa->sa_family);
+ cERROR(1, "Unknown network family '%d'", sa->sa_family);
key_len = 0;
break;
}
sharename = extract_sharename(tcon->treeName);
if (IS_ERR(sharename)) {
- cFYI(1, "CIFS: couldn't extract sharename\n");
+ cFYI(1, "%s: couldn't extract sharename\n", __func__);
sharename = NULL;
return 0;
}
pagevec_init(&pvec, 0);
first = 0;
- cFYI(1, "cifs inode 0x%p now uncached", cifsi);
+ cFYI(1, "%s: cifs inode 0x%p now uncached", __func__, cifsi);
for (;;) {
nr_pages = pagevec_lookup(&pvec,
if (cifs_pdu == NULL || server == NULL)
return -EINVAL;
- if (cifs_pdu->Command == SMB_COM_NEGOTIATE)
+ if (!server->session_estab)
return 0;
if (cifs_pdu->Command == SMB_COM_LOCKING_ANDX) {
{
struct cifs_sb_info *cifs_sb;
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
cifs_sb = CIFS_SB(inode->i_sb);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) {
}
}
+static void
+cifs_show_security(struct seq_file *s, struct TCP_Server_Info *server)
+{
+ seq_printf(s, ",sec=");
+
+ switch (server->secType) {
+ case LANMAN:
+ seq_printf(s, "lanman");
+ break;
+ case NTLMv2:
+ seq_printf(s, "ntlmv2");
+ break;
+ case NTLM:
+ seq_printf(s, "ntlm");
+ break;
+ case Kerberos:
+ seq_printf(s, "krb5");
+ break;
+ case RawNTLMSSP:
+ seq_printf(s, "ntlmssp");
+ break;
+ default:
+ /* shouldn't ever happen */
+ seq_printf(s, "unknown");
+ break;
+ }
+
+ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ seq_printf(s, "i");
+}
+
/*
* cifs_show_options() is for displaying mount options in /proc/mounts.
* Not all settable options are displayed but most of the important
struct sockaddr *srcaddr;
srcaddr = (struct sockaddr *)&tcon->ses->server->srcaddr;
+ cifs_show_security(s, tcon->ses->server);
+
seq_printf(s, ",unc=%s", tcon->treeName);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER)
extern const struct export_operations cifs_export_ops;
#endif /* CIFS_NFSD_EXPORT */
-#define CIFS_VERSION "1.72"
+#define CIFS_VERSION "1.73"
#endif /* _CIFSFS_H */
mid_entry->callback(mid_entry);
}
- while (server->tcpStatus == CifsNeedReconnect) {
+ do {
try_to_freeze();
/* we should try only the port we connected to before */
server->tcpStatus = CifsNeedNegotiate;
spin_unlock(&GlobalMid_Lock);
}
- }
+ } while (server->tcpStatus == CifsNeedReconnect);
return rc;
}
struct smb_vol *vol)
{
char *value, *data, *end;
- char *mountdata_copy, *options;
+ char *mountdata_copy = NULL, *options;
unsigned int temp_len, i, j;
char separator[2];
short int override_uid = -1;
"/proc/fs/cifs/LookupCacheEnabled to 0\n");
} else if (strnicmp(data, "fsc", 3) == 0) {
#ifndef CONFIG_CIFS_FSCACHE
- cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
+ cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE "
"kernel config option set");
goto cifs_parse_mount_err;
#endif
warned_on_ntlm = true;
cERROR(1, "default security mechanism requested. The default "
"security mechanism will be upgraded from ntlm to "
- "ntlmv2 in kernel release 2.6.41");
+ "ntlmv2 in kernel release 3.1");
}
ses->overrideSecFlg = volume_info->secFlg;
}
static inline struct tcon_link *
-cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb);
+cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
+{
+ return cifs_sb->master_tlink;
+}
static int
compare_mount_options(struct super_block *sb, struct cifs_mnt_data *mnt_data)
return rc;
}
+/*
+ * Issue a TREE_CONNECT request. Note that for IPC$ shares, that the tcon
+ * pointer may be NULL.
+ */
int
CIFSTCon(unsigned int xid, struct cifs_ses *ses,
const char *tree, struct cifs_tcon *tcon,
pSMB->AndXCommand = 0xFF;
pSMB->Flags = cpu_to_le16(TCON_EXTENDED_SECINFO);
bcc_ptr = &pSMB->Password[0];
- if ((ses->server->sec_mode) & SECMODE_USER) {
+ if (!tcon || (ses->server->sec_mode & SECMODE_USER)) {
pSMB->PasswordLength = cpu_to_le16(1); /* minimum */
*bcc_ptr = 0; /* password is null byte */
bcc_ptr++; /* skip password */
}
if (rc == 0) {
spin_lock(&GlobalMid_Lock);
- if (server->tcpStatus != CifsExiting)
+ if (server->tcpStatus == CifsNeedNegotiate)
server->tcpStatus = CifsGood;
else
rc = -EHOSTDOWN;
return tcon;
}
-static inline struct tcon_link *
-cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
-{
- return cifs_sb->master_tlink;
-}
-
struct cifs_tcon *
cifs_sb_master_tcon(struct cifs_sb_info *cifs_sb)
{
server->fscache =
fscache_acquire_cookie(cifs_fscache_netfs.primary_index,
&cifs_fscache_server_index_def, server);
- cFYI(1, "CIFS: get client cookie (0x%p/0x%p)", server,
- server->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server,
+ server->fscache);
}
void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server)
{
- cFYI(1, "CIFS: release client cookie (0x%p/0x%p)", server,
- server->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server,
+ server->fscache);
fscache_relinquish_cookie(server->fscache, 0);
server->fscache = NULL;
}
tcon->fscache =
fscache_acquire_cookie(server->fscache,
&cifs_fscache_super_index_def, tcon);
- cFYI(1, "CIFS: get superblock cookie (0x%p/0x%p)",
- server->fscache, tcon->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server->fscache,
+ tcon->fscache);
}
void cifs_fscache_release_super_cookie(struct cifs_tcon *tcon)
{
- cFYI(1, "CIFS: releasing superblock cookie (0x%p)", tcon->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, tcon->fscache);
fscache_relinquish_cookie(tcon->fscache, 0);
tcon->fscache = NULL;
}
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
&cifs_fscache_inode_object_def, cifsi);
- cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
- cifsi->fscache);
+ cFYI(1, "%s: got FH cookie (0x%p/0x%p)", __func__,
+ tcon->fscache, cifsi->fscache);
}
}
struct cifsInodeInfo *cifsi = CIFS_I(inode);
if (cifsi->fscache) {
- cFYI(1, "CIFS releasing inode cookie (0x%p)",
- cifsi->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache);
fscache_relinquish_cookie(cifsi->fscache, 0);
cifsi->fscache = NULL;
}
struct cifsInodeInfo *cifsi = CIFS_I(inode);
if (cifsi->fscache) {
- cFYI(1, "CIFS disabling inode cookie (0x%p)",
- cifsi->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache);
fscache_relinquish_cookie(cifsi->fscache, 1);
cifsi->fscache = NULL;
}
cifs_sb_master_tcon(cifs_sb)->fscache,
&cifs_fscache_inode_object_def,
cifsi);
- cFYI(1, "CIFS: new cookie 0x%p oldcookie 0x%p",
- cifsi->fscache, old);
+ cFYI(1, "%s: new cookie 0x%p oldcookie 0x%p",
+ __func__, cifsi->fscache, old);
}
}
struct inode *inode = page->mapping->host;
struct cifsInodeInfo *cifsi = CIFS_I(inode);
- cFYI(1, "CIFS: fscache release page (0x%p/0x%p)",
- page, cifsi->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, page,
+ cifsi->fscache);
if (!fscache_maybe_release_page(cifsi->fscache, page, gfp))
return 0;
}
static void cifs_readpage_from_fscache_complete(struct page *page, void *ctx,
int error)
{
- cFYI(1, "CFS: readpage_from_fscache_complete (0x%p/%d)",
- page, error);
+ cFYI(1, "%s: (0x%p/%d)", __func__, page, error);
if (!error)
SetPageUptodate(page);
unlock_page(page);
{
int ret;
- cFYI(1, "CIFS: readpage_from_fscache(fsc:%p, p:%p, i:0x%p",
+ cFYI(1, "%s: (fsc:%p, p:%p, i:0x%p", __func__,
CIFS_I(inode)->fscache, page, inode);
ret = fscache_read_or_alloc_page(CIFS_I(inode)->fscache, page,
cifs_readpage_from_fscache_complete,
switch (ret) {
case 0: /* page found in fscache, read submitted */
- cFYI(1, "CIFS: readpage_from_fscache: submitted");
+ cFYI(1, "%s: submitted", __func__);
return ret;
case -ENOBUFS: /* page won't be cached */
case -ENODATA: /* page not in cache */
- cFYI(1, "CIFS: readpage_from_fscache %d", ret);
+ cFYI(1, "%s: %d", __func__, ret);
return 1;
default:
{
int ret;
- cFYI(1, "CIFS: __cifs_readpages_from_fscache (0x%p/%u/0x%p)",
+ cFYI(1, "%s: (0x%p/%u/0x%p)", __func__,
CIFS_I(inode)->fscache, *nr_pages, inode);
ret = fscache_read_or_alloc_pages(CIFS_I(inode)->fscache, mapping,
pages, nr_pages,
mapping_gfp_mask(mapping));
switch (ret) {
case 0: /* read submitted to the cache for all pages */
- cFYI(1, "CIFS: readpages_from_fscache: submitted");
+ cFYI(1, "%s: submitted", __func__);
return ret;
case -ENOBUFS: /* some pages are not cached and can't be */
case -ENODATA: /* some pages are not cached */
- cFYI(1, "CIFS: readpages_from_fscache: no page");
+ cFYI(1, "%s: no page", __func__);
return 1;
default:
{
int ret;
- cFYI(1, "CIFS: readpage_to_fscache(fsc: %p, p: %p, i: %p",
+ cFYI(1, "%s: (fsc: %p, p: %p, i: %p)", __func__,
CIFS_I(inode)->fscache, page, inode);
ret = fscache_write_page(CIFS_I(inode)->fscache, page, GFP_KERNEL);
if (ret != 0)
struct cifsInodeInfo *cifsi = CIFS_I(inode);
struct fscache_cookie *cookie = cifsi->fscache;
- cFYI(1, "CIFS: fscache invalidatepage (0x%p/0x%p)", page, cookie);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, page, cookie);
fscache_wait_on_page_write(cookie, page);
fscache_uncache_page(cookie, page);
}
/* the coda pioctl inode ops */
static int coda_ioctl_permission(struct inode *inode, int mask, unsigned int flags)
{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
return (mask & MAY_EXEC) ? -EACCES : 0;
}
/* FIXME: (deleted) ? */
path = d_path(&dcs->path, kbuf, PAGE_SIZE);
+ mutex_unlock(&dcookie_mutex);
+
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out_free;
out_free:
kfree(kbuf);
+ return err;
out:
mutex_unlock(&dcookie_mutex);
return err;
bprm->mm = NULL; /* We're using it now */
+ set_fs(USER_DS);
current->flags &= ~(PF_RANDOMIZE | PF_KTHREAD);
flush_thread();
current->personality &= ~bprm->per_clear;
if (retval)
return retval;
- /* kernel module loader fixup */
- /* so we don't try to load run modprobe in kernel space. */
- set_fs(USER_DS);
-
retval = audit_bprm(bprm);
if (retval)
return retval;
* is a special value that we use to trap recursive
* core dumps
*/
-static int umh_pipe_setup(struct subprocess_info *info)
+static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
{
struct file *rp, *wp;
struct fdtable *fdt;
if (attr & ATTR_SYS)
inode->i_flags |= S_IMMUTABLE;
else
- inode->i_flags &= S_IMMUTABLE;
+ inode->i_flags &= ~S_IMMUTABLE;
}
fat_save_attrs(inode, attr);
if (sb->s_flags & MS_MANDLOCK)
goto err;
+ sb->s_flags &= ~MS_NOSEC;
+
if (!parse_fuse_opt((char *) data, &d, is_bdev))
goto err;
drop_ref = 1;
}
spin_lock(&gl->gl_spin);
- if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
+ if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != LM_ST_EXCLUSIVE) {
unsigned long holdtime, now = jiffies;
+
holdtime = gl->gl_tchange + gl->gl_ops->go_min_hold_time;
if (time_before(now, holdtime))
delay = holdtime - now;
- set_bit(delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE, &gl->gl_flags);
+
+ if (!delay) {
+ clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags);
+ set_bit(GLF_DEMOTE, &gl->gl_flags);
+ }
}
run_queue(gl, 0);
spin_unlock(&gl->gl_spin);
out_no_read:
printk(KERN_WARNING "%s: bread failed, dev=%s, iso_blknum=%d, block=%d\n",
__func__, s->s_id, iso_blknum, block);
- goto out_freesbi;
+ goto out_freebh;
out_bad_zone_size:
printk(KERN_WARNING "ISOFS: Bad logical zone size %ld\n",
sbi->s_log_zone_size);
out_freebh:
brelse(bh);
+ brelse(pri_bh);
out_freesbi:
kfree(opt.iocharset);
kfree(sbi);
bdev = blkdev_get_by_dev(sbi->logdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL,
log);
if (IS_ERR(bdev)) {
- rc = -PTR_ERR(bdev);
+ rc = PTR_ERR(bdev);
goto free;
}
return __logfs_create(dir, dentry, inode, target, destlen);
}
-static int logfs_permission(struct inode *inode, int mask, unsigned int flags)
-{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
- return generic_permission(inode, mask, flags, NULL);
-}
-
static int logfs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
.mknod = logfs_mknod,
.rename = logfs_rename,
.rmdir = logfs_rmdir,
- .permission = logfs_permission,
.symlink = logfs_symlink,
.unlink = logfs_unlink,
};
/*
* Read/write DACs are always overridable.
- * Executable DACs are overridable if at least one exec bit is set.
+ * Executable DACs are overridable for all directories and
+ * for non-directories that have least one exec bit set.
*/
if (!(mask & MAY_EXEC) || execute_ok(inode))
if (ns_capable(inode_userns(inode), CAP_DAC_OVERRIDE))
if (!mnt) /* mount collision */
return 0;
+ if (!*need_mntput) {
+ /* lock_mount() may release path->mnt on error */
+ mntget(path->mnt);
+ *need_mntput = true;
+ }
err = finish_automount(mnt, path);
switch (err) {
/* Someone else made a mount here whilst we were busy */
return 0;
case 0:
- dput(path->dentry);
- if (*need_mntput)
- mntput(path->mnt);
+ path_put(path);
path->mnt = mnt;
path->dentry = dget(mnt->mnt_root);
- *need_mntput = true;
return 0;
default:
return err;
*/
static int follow_managed(struct path *path, unsigned flags)
{
+ struct vfsmount *mnt = path->mnt; /* held by caller, must be left alone */
unsigned managed;
bool need_mntput = false;
- int ret;
+ int ret = 0;
/* Given that we're not holding a lock here, we retain the value in a
* local variable for each dentry as we look at it so that we don't see
BUG_ON(!path->dentry->d_op->d_manage);
ret = path->dentry->d_op->d_manage(path->dentry, false);
if (ret < 0)
- return ret == -EISDIR ? 0 : ret;
+ break;
}
/* Transit to a mounted filesystem. */
if (managed & DCACHE_NEED_AUTOMOUNT) {
ret = follow_automount(path, flags, &need_mntput);
if (ret < 0)
- return ret == -EISDIR ? 0 : ret;
+ break;
continue;
}
/* We didn't change the current path point */
break;
}
- return 0;
+
+ if (need_mntput && path->mnt == mnt)
+ mntput(path->mnt);
+ if (ret == -EISDIR)
+ ret = 0;
+ return ret;
}
int follow_down_one(struct path *path)
* Follow down to the covering mount currently visible to userspace. At each
* point, the filesystem owning that dentry may be queried as to whether the
* caller is permitted to proceed or not.
- *
- * Care must be taken as namespace_sem may be held (indicated by mounting_here
- * being true).
*/
int follow_down(struct path *path)
{
error = PTR_ERR(dentry);
if (IS_ERR(dentry))
goto exit2;
+ if (!dentry->d_inode) {
+ error = -ENOENT;
+ goto exit3;
+ }
error = mnt_want_write(nd.path.mnt);
if (error)
goto exit3;
if (nd.last.name[nd.last.len])
goto slashes;
inode = dentry->d_inode;
- if (inode)
- ihold(inode);
+ if (!inode)
+ goto slashes;
+ ihold(inode);
error = mnt_want_write(nd.path.mnt);
if (error)
goto exit2;
select NFSD_V3
select FS_POSIX_ACL
select SUNRPC_GSS
+ select CRYPTO
help
This option enables support in your system's NFS server for
version 4 of the NFS protocol (RFC 3530).
#include <linux/lockd/lockd.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/gss_api.h>
+#include <linux/sunrpc/gss_krb5_enctypes.h>
#include "idmap.h"
#include "nfsd.h"
.release = single_release,
};
-#ifdef CONFIG_SUNRPC_GSS
+#if defined(CONFIG_SUNRPC_GSS) || defined(CONFIG_SUNRPC_GSS_MODULE)
static int supported_enctypes_show(struct seq_file *m, void *v)
{
- struct gss_api_mech *k5mech;
-
- k5mech = gss_mech_get_by_name("krb5");
- if (k5mech == NULL)
- goto out;
- if (k5mech->gm_upcall_enctypes != NULL)
- seq_printf(m, k5mech->gm_upcall_enctypes);
- gss_mech_put(k5mech);
-out:
+ seq_printf(m, KRB5_SUPPORTED_ENCTYPES);
return 0;
}
.llseek = seq_lseek,
.release = single_release,
};
-#endif /* CONFIG_SUNRPC_GSS */
+#endif /* CONFIG_SUNRPC_GSS or CONFIG_SUNRPC_GSS_MODULE */
extern int nfsd_pool_stats_open(struct inode *inode, struct file *file);
extern int nfsd_pool_stats_release(struct inode *inode, struct file *file);
[NFSD_Versions] = {"versions", &transaction_ops, S_IWUSR|S_IRUSR},
[NFSD_Ports] = {"portlist", &transaction_ops, S_IWUSR|S_IRUGO},
[NFSD_MaxBlkSize] = {"max_block_size", &transaction_ops, S_IWUSR|S_IRUGO},
-#ifdef CONFIG_SUNRPC_GSS
+#if defined(CONFIG_SUNRPC_GSS) || defined(CONFIG_SUNRPC_GSS_MODULE)
[NFSD_SupportedEnctypes] = {"supported_krb5_enctypes", &supported_enctypes_ops, S_IRUGO},
-#endif /* CONFIG_SUNRPC_GSS */
+#endif /* CONFIG_SUNRPC_GSS or CONFIG_SUNRPC_GSS_MODULE */
#ifdef CONFIG_NFSD_V4
[NFSD_Leasetime] = {"nfsv4leasetime", &transaction_ops, S_IWUSR|S_IRUSR},
[NFSD_Gracetime] = {"nfsv4gracetime", &transaction_ops, S_IWUSR|S_IRUSR},
}
#endif /* CONFIG_NFSD_V3 */
+static int nfsd_open_break_lease(struct inode *inode, int access)
+{
+ unsigned int mode;
+ if (access & NFSD_MAY_NOT_BREAK_LEASE)
+ return 0;
+ mode = (access & NFSD_MAY_WRITE) ? O_WRONLY : O_RDONLY;
+ return break_lease(inode, mode | O_NONBLOCK);
+}
/*
* Open an existing file or directory.
if (!inode->i_fop)
goto out;
- /*
- * Check to see if there are any leases on this file.
- * This may block while leases are broken.
- */
- if (!(access & NFSD_MAY_NOT_BREAK_LEASE))
- host_err = break_lease(inode, O_NONBLOCK | ((access & NFSD_MAY_WRITE) ? O_WRONLY : 0));
+ host_err = nfsd_open_break_lease(inode, access);
if (host_err) /* NOMEM or WOULDBLOCK */
goto out_nfserr;
if (!dold->d_inode)
goto out_drop_write;
host_err = nfsd_break_lease(dold->d_inode);
- if (host_err)
+ if (host_err) {
+ err = nfserrno(host_err);
goto out_drop_write;
+ }
host_err = vfs_link(dold, dirp, dnew);
if (!host_err) {
err = nfserrno(commit_metadata(ffhp));
path[level].bp_bh = NULL;
}
+static void nilfs_btree_nop(struct nilfs_bmap *btree,
+ struct nilfs_btree_path *path,
+ int level, __u64 *keyp, __u64 *ptrp)
+{
+}
static int nilfs_btree_prepare_delete(struct nilfs_bmap *btree,
struct nilfs_btree_path *path,
struct buffer_head *bh;
struct nilfs_btree_node *node, *parent, *sib;
__u64 sibptr;
- int pindex, level, ncmin, ncmax, ncblk, ret;
+ int pindex, dindex, level, ncmin, ncmax, ncblk, ret;
ret = 0;
stats->bs_nblocks = 0;
ncmin = NILFS_BTREE_NODE_NCHILDREN_MIN(nilfs_btree_node_size(btree));
ncblk = nilfs_btree_nchildren_per_block(btree);
- for (level = NILFS_BTREE_LEVEL_NODE_MIN;
+ for (level = NILFS_BTREE_LEVEL_NODE_MIN, dindex = path[level].bp_index;
level < nilfs_btree_height(btree) - 1;
level++) {
node = nilfs_btree_get_nonroot_node(path, level);
path[level].bp_oldreq.bpr_ptr =
- nilfs_btree_node_get_ptr(node, path[level].bp_index,
- ncblk);
+ nilfs_btree_node_get_ptr(node, dindex, ncblk);
ret = nilfs_bmap_prepare_end_ptr(btree,
&path[level].bp_oldreq, dat);
if (ret < 0)
parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
pindex = path[level + 1].bp_index;
+ dindex = pindex;
if (pindex > 0) {
/* left sibling */
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_concat_right;
stats->bs_nblocks++;
+ /*
+ * When merging right sibling node
+ * into the current node, pointer to
+ * the right sibling node must be
+ * terminated instead. The adjustment
+ * below is required for that.
+ */
+ dindex = pindex + 1;
/* continue; */
}
} else {
NILFS_BTREE_ROOT_NCHILDREN_MAX) {
path[level].bp_op = nilfs_btree_shrink;
stats->bs_nblocks += 2;
+ level++;
+ path[level].bp_op = nilfs_btree_nop;
+ goto shrink_root_child;
} else {
path[level].bp_op = nilfs_btree_do_delete;
stats->bs_nblocks++;
+ goto out;
}
-
- goto out;
-
}
}
+ /* child of the root node is deleted */
+ path[level].bp_op = nilfs_btree_do_delete;
+ stats->bs_nblocks++;
+
+shrink_root_child:
node = nilfs_btree_get_root(btree);
path[level].bp_oldreq.bpr_ptr =
- nilfs_btree_node_get_ptr(node, path[level].bp_index,
+ nilfs_btree_node_get_ptr(node, dindex,
NILFS_BTREE_ROOT_NCHILDREN_MAX);
ret = nilfs_bmap_prepare_end_ptr(btree, &path[level].bp_oldreq, dat);
if (ret < 0)
goto err_out_child_node;
- /* child of the root node is deleted */
- path[level].bp_op = nilfs_btree_do_delete;
- stats->bs_nblocks++;
-
/* success */
out:
*levelp = level;
int nilfs_permission(struct inode *inode, int mask, unsigned int flags)
{
- struct nilfs_root *root;
-
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
- root = NILFS_I(inode)->i_root;
+ struct nilfs_root *root = NILFS_I(inode)->i_root;
if ((mask & MAY_WRITE) && root &&
root->cno != NILFS_CPTREE_CURRENT_CNO)
return -EROFS; /* snapshot is not writable */
sci->sc_watermark = NILFS_SC_DEFAULT_WATERMARK;
if (nilfs->ns_interval)
- sci->sc_interval = nilfs->ns_interval;
+ sci->sc_interval = HZ * nilfs->ns_interval;
if (nilfs->ns_watermark)
sci->sc_watermark = nilfs->ns_watermark;
return sci;
sb->s_magic = OCFS2_SUPER_MAGIC;
- sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
+ sb->s_flags = (sb->s_flags & ~(MS_POSIXACL | MS_NOSEC)) |
((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
/* Hard readonly mode only if: bdev_read_only, MS_RDONLY,
*/
static int proc_fd_permission(struct inode *inode, int mask, unsigned int flags)
{
- int rv;
-
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
- rv = generic_permission(inode, mask, flags, NULL);
+ int rv = generic_permission(inode, mask, flags, NULL);
if (rv == 0)
return 0;
if (task_pid(current) == proc_pid(inode))
struct inode *inode;
struct proc_inode *ei;
struct dentry *error = ERR_PTR(-ENOENT);
+ void *ns;
inode = proc_pid_make_inode(dir->i_sb, task);
if (!inode)
goto out;
+ ns = ns_ops->get(task);
+ if (!ns)
+ goto out_iput;
+
ei = PROC_I(inode);
inode->i_mode = S_IFREG|S_IRUSR;
inode->i_fop = &ns_file_operations;
ei->ns_ops = ns_ops;
- ei->ns = ns_ops->get(task);
- if (!ei->ns)
- goto out_iput;
+ ei->ns = ns;
dentry->d_op = &pid_dentry_operations;
d_add(dentry, inode);
struct ctl_table *table;
int error;
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
/* Executable files are not allowed under /proc/sys/ */
if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))
return -EACCES;
static int proc_set_super(struct super_block *sb, void *data)
{
- struct pid_namespace *ns;
-
- ns = (struct pid_namespace *)data;
- sb->s_fs_info = get_pid_ns(ns);
- return set_anon_super(sb, NULL);
+ int err = set_anon_super(sb, NULL);
+ if (!err) {
+ struct pid_namespace *ns = (struct pid_namespace *)data;
+ sb->s_fs_info = get_pid_ns(ns);
+ }
+ return err;
}
static struct dentry *proc_mount(struct file_system_type *fs_type,
int reiserfs_permission(struct inode *inode, int mask, unsigned int flags)
{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
/*
* We don't do permission checks on the internal objects.
* Permissions are determined by the "owning" object.
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags;
+ s->s_flags = flags | MS_NOSEC;
s->s_mode = mode;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
sb_set_blocksize(s, block_size(bdev));
return error;
}
+static void free_sysfs_super_info(struct sysfs_super_info *info)
+{
+ int type;
+ for (type = KOBJ_NS_TYPE_NONE; type < KOBJ_NS_TYPES; type++)
+ kobj_ns_drop(type, info->ns[type]);
+ kfree(info);
+}
+
static struct dentry *sysfs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
return ERR_PTR(-ENOMEM);
for (type = KOBJ_NS_TYPE_NONE; type < KOBJ_NS_TYPES; type++)
- info->ns[type] = kobj_ns_current(type);
+ info->ns[type] = kobj_ns_grab_current(type);
sb = sget(fs_type, sysfs_test_super, sysfs_set_super, info);
if (IS_ERR(sb) || sb->s_fs_info != info)
- kfree(info);
+ free_sysfs_super_info(info);
if (IS_ERR(sb))
return ERR_CAST(sb);
if (!sb->s_root) {
static void sysfs_kill_sb(struct super_block *sb)
{
struct sysfs_super_info *info = sysfs_info(sb);
-
/* Remove the superblock from fs_supers/s_instances
* so we can't find it, before freeing sysfs_super_info.
*/
kill_anon_super(sb);
- kfree(info);
+ free_sysfs_super_info(info);
}
static struct file_system_type sysfs_fs_type = {
.kill_sb = sysfs_kill_sb,
};
-void sysfs_exit_ns(enum kobj_ns_type type, const void *ns)
-{
- struct super_block *sb;
-
- mutex_lock(&sysfs_mutex);
- spin_lock(&sb_lock);
- list_for_each_entry(sb, &sysfs_fs_type.fs_supers, s_instances) {
- struct sysfs_super_info *info = sysfs_info(sb);
- /*
- * If we see a superblock on the fs_supers/s_instances
- * list the unmount has not completed and sb->s_fs_info
- * points to a valid struct sysfs_super_info.
- */
- /* Ignore superblocks with the wrong ns */
- if (info->ns[type] != ns)
- continue;
- info->ns[type] = NULL;
- }
- spin_unlock(&sb_lock);
- mutex_unlock(&sysfs_mutex);
-}
-
int __init sysfs_init(void)
{
int err = -ENOMEM;
* instance).
*/
struct sysfs_super_info {
- const void *ns[KOBJ_NS_TYPES];
+ void *ns[KOBJ_NS_TYPES];
};
#define sysfs_info(SB) ((struct sysfs_super_info *)(SB->s_fs_info))
extern struct sysfs_dirent sysfs_root;
/*
* Called when the clock was set to cancel the timers in the cancel
- * list.
+ * list. This will wake up processes waiting on these timers. The
+ * wake-up requires ctx->ticks to be non zero, therefore we increment
+ * it before calling wake_up_locked().
*/
void timerfd_clock_was_set(void)
{
spin_lock_irqsave(&ctx->wqh.lock, flags);
if (ctx->moffs.tv64 != moffs.tv64) {
ctx->moffs.tv64 = KTIME_MAX;
+ ctx->ticks++;
wake_up_locked(&ctx->wqh);
}
spin_unlock_irqrestore(&ctx->wqh.lock, flags);
bdi_destroy(&c->bdi);
ubi_close_volume(c->ubi);
mutex_unlock(&c->umount_mutex);
- kfree(c);
}
static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
return ERR_PTR(-EINVAL);
}
-static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
+static struct ubifs_info *alloc_ubifs_info(struct ubi_volume_desc *ubi)
{
- struct ubi_volume_desc *ubi = sb->s_fs_info;
struct ubifs_info *c;
- struct inode *root;
- int err;
c = kzalloc(sizeof(struct ubifs_info), GFP_KERNEL);
- if (!c)
- return -ENOMEM;
+ if (c) {
+ spin_lock_init(&c->cnt_lock);
+ spin_lock_init(&c->cs_lock);
+ spin_lock_init(&c->buds_lock);
+ spin_lock_init(&c->space_lock);
+ spin_lock_init(&c->orphan_lock);
+ init_rwsem(&c->commit_sem);
+ mutex_init(&c->lp_mutex);
+ mutex_init(&c->tnc_mutex);
+ mutex_init(&c->log_mutex);
+ mutex_init(&c->mst_mutex);
+ mutex_init(&c->umount_mutex);
+ mutex_init(&c->bu_mutex);
+ mutex_init(&c->write_reserve_mutex);
+ init_waitqueue_head(&c->cmt_wq);
+ c->buds = RB_ROOT;
+ c->old_idx = RB_ROOT;
+ c->size_tree = RB_ROOT;
+ c->orph_tree = RB_ROOT;
+ INIT_LIST_HEAD(&c->infos_list);
+ INIT_LIST_HEAD(&c->idx_gc);
+ INIT_LIST_HEAD(&c->replay_list);
+ INIT_LIST_HEAD(&c->replay_buds);
+ INIT_LIST_HEAD(&c->uncat_list);
+ INIT_LIST_HEAD(&c->empty_list);
+ INIT_LIST_HEAD(&c->freeable_list);
+ INIT_LIST_HEAD(&c->frdi_idx_list);
+ INIT_LIST_HEAD(&c->unclean_leb_list);
+ INIT_LIST_HEAD(&c->old_buds);
+ INIT_LIST_HEAD(&c->orph_list);
+ INIT_LIST_HEAD(&c->orph_new);
+ c->no_chk_data_crc = 1;
+
+ c->highest_inum = UBIFS_FIRST_INO;
+ c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
+
+ ubi_get_volume_info(ubi, &c->vi);
+ ubi_get_device_info(c->vi.ubi_num, &c->di);
+ }
+ return c;
+}
- spin_lock_init(&c->cnt_lock);
- spin_lock_init(&c->cs_lock);
- spin_lock_init(&c->buds_lock);
- spin_lock_init(&c->space_lock);
- spin_lock_init(&c->orphan_lock);
- init_rwsem(&c->commit_sem);
- mutex_init(&c->lp_mutex);
- mutex_init(&c->tnc_mutex);
- mutex_init(&c->log_mutex);
- mutex_init(&c->mst_mutex);
- mutex_init(&c->umount_mutex);
- mutex_init(&c->bu_mutex);
- mutex_init(&c->write_reserve_mutex);
- init_waitqueue_head(&c->cmt_wq);
- c->buds = RB_ROOT;
- c->old_idx = RB_ROOT;
- c->size_tree = RB_ROOT;
- c->orph_tree = RB_ROOT;
- INIT_LIST_HEAD(&c->infos_list);
- INIT_LIST_HEAD(&c->idx_gc);
- INIT_LIST_HEAD(&c->replay_list);
- INIT_LIST_HEAD(&c->replay_buds);
- INIT_LIST_HEAD(&c->uncat_list);
- INIT_LIST_HEAD(&c->empty_list);
- INIT_LIST_HEAD(&c->freeable_list);
- INIT_LIST_HEAD(&c->frdi_idx_list);
- INIT_LIST_HEAD(&c->unclean_leb_list);
- INIT_LIST_HEAD(&c->old_buds);
- INIT_LIST_HEAD(&c->orph_list);
- INIT_LIST_HEAD(&c->orph_new);
- c->no_chk_data_crc = 1;
+static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
+{
+ struct ubifs_info *c = sb->s_fs_info;
+ struct inode *root;
+ int err;
c->vfs_sb = sb;
- c->highest_inum = UBIFS_FIRST_INO;
- c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
-
- ubi_get_volume_info(ubi, &c->vi);
- ubi_get_device_info(c->vi.ubi_num, &c->di);
-
/* Re-open the UBI device in read-write mode */
c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READWRITE);
if (IS_ERR(c->ubi)) {
err = PTR_ERR(c->ubi);
- goto out_free;
+ goto out;
}
/*
bdi_destroy(&c->bdi);
out_close:
ubi_close_volume(c->ubi);
-out_free:
- kfree(c);
+out:
return err;
}
static int sb_test(struct super_block *sb, void *data)
{
- dev_t *dev = data;
+ struct ubifs_info *c1 = data;
struct ubifs_info *c = sb->s_fs_info;
- return c->vi.cdev == *dev;
+ return c->vi.cdev == c1->vi.cdev;
+}
+
+static int sb_set(struct super_block *sb, void *data)
+{
+ sb->s_fs_info = data;
+ return set_anon_super(sb, NULL);
}
static struct dentry *ubifs_mount(struct file_system_type *fs_type, int flags,
const char *name, void *data)
{
struct ubi_volume_desc *ubi;
- struct ubi_volume_info vi;
+ struct ubifs_info *c;
struct super_block *sb;
int err;
name, (int)PTR_ERR(ubi));
return ERR_CAST(ubi);
}
- ubi_get_volume_info(ubi, &vi);
- dbg_gen("opened ubi%d_%d", vi.ubi_num, vi.vol_id);
+ c = alloc_ubifs_info(ubi);
+ if (!c) {
+ err = -ENOMEM;
+ goto out_close;
+ }
+
+ dbg_gen("opened ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
- sb = sget(fs_type, &sb_test, &set_anon_super, &vi.cdev);
+ sb = sget(fs_type, sb_test, sb_set, c);
if (IS_ERR(sb)) {
err = PTR_ERR(sb);
+ kfree(c);
goto out_close;
}
if (sb->s_root) {
struct ubifs_info *c1 = sb->s_fs_info;
-
+ kfree(c);
/* A new mount point for already mounted UBIFS */
dbg_gen("this ubi volume is already mounted");
if (!!(flags & MS_RDONLY) != c1->ro_mount) {
}
} else {
sb->s_flags = flags;
- /*
- * Pass 'ubi' to 'fill_super()' in sb->s_fs_info where it is
- * replaced by 'c'.
- */
- sb->s_fs_info = ubi;
err = ubifs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err)
goto out_deact;
return ERR_PTR(err);
}
+static void kill_ubifs_super(struct super_block *s)
+{
+ struct ubifs_info *c = s->s_fs_info;
+ kill_anon_super(s);
+ kfree(c);
+}
+
static struct file_system_type ubifs_fs_type = {
.name = "ubifs",
.owner = THIS_MODULE,
.mount = ubifs_mount,
- .kill_sb = kill_anon_super,
+ .kill_sb = kill_ubifs_super,
};
/*
{
struct inode *inode = file->f_mapping->host;
struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
int error = 0;
int log_flushed = 0;
trace_xfs_file_fsync(ip);
- if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ if (XFS_FORCED_SHUTDOWN(mp))
return -XFS_ERROR(EIO);
xfs_iflags_clear(ip, XFS_ITRUNCATED);
xfs_ioend_wait(ip);
+ if (mp->m_flags & XFS_MOUNT_BARRIER) {
+ /*
+ * If we have an RT and/or log subvolume we need to make sure
+ * to flush the write cache the device used for file data
+ * first. This is to ensure newly written file data make
+ * it to disk before logging the new inode size in case of
+ * an extending write.
+ */
+ if (XFS_IS_REALTIME_INODE(ip))
+ xfs_blkdev_issue_flush(mp->m_rtdev_targp);
+ else if (mp->m_logdev_targp != mp->m_ddev_targp)
+ xfs_blkdev_issue_flush(mp->m_ddev_targp);
+ }
+
/*
* We always need to make sure that the required inode state is safe on
* disk. The inode might be clean but we still might need to force the
* updates. The sync transaction will also force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
- tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS);
+ tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS);
error = xfs_trans_reserve(tp, 0,
- XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0);
+ XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0);
if (error) {
xfs_trans_cancel(tp, 0);
return -error;
* force the log.
*/
if (xfs_ipincount(ip)) {
- error = _xfs_log_force_lsn(ip->i_mount,
+ error = _xfs_log_force_lsn(mp,
ip->i_itemp->ili_last_lsn,
XFS_LOG_SYNC, &log_flushed);
}
xfs_iunlock(ip, XFS_ILOCK_SHARED);
}
- if (ip->i_mount->m_flags & XFS_MOUNT_BARRIER) {
- /*
- * If the log write didn't issue an ordered tag we need
- * to flush the disk cache for the data device now.
- */
- if (!log_flushed)
- xfs_blkdev_issue_flush(ip->i_mount->m_ddev_targp);
-
- /*
- * If this inode is on the RT dev we need to flush that
- * cache as well.
- */
- if (XFS_IS_REALTIME_INODE(ip))
- xfs_blkdev_issue_flush(ip->i_mount->m_rtdev_targp);
- }
+ /*
+ * If we only have a single device, and the log force about was
+ * a no-op we might have to flush the data device cache here.
+ * This can only happen for fdatasync/O_DSYNC if we were overwriting
+ * an already allocated file and thus do not have any metadata to
+ * commit.
+ */
+ if ((mp->m_flags & XFS_MOUNT_BARRIER) &&
+ mp->m_logdev_targp == mp->m_ddev_targp &&
+ !XFS_IS_REALTIME_INODE(ip) &&
+ !log_flushed)
+ xfs_blkdev_issue_flush(mp->m_ddev_targp);
return -error;
}
if (IS_POSIXACL(dir)) {
default_acl = xfs_get_acl(dir, ACL_TYPE_DEFAULT);
if (IS_ERR(default_acl))
- return -PTR_ERR(default_acl);
+ return PTR_ERR(default_acl);
if (!default_acl)
mode &= ~current_umask();
blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
}
-/*
- * Try to write out the superblock using barriers.
- */
-STATIC int
-xfs_barrier_test(
- xfs_mount_t *mp)
-{
- xfs_buf_t *sbp = xfs_getsb(mp, 0);
- int error;
-
- XFS_BUF_UNDONE(sbp);
- XFS_BUF_UNREAD(sbp);
- XFS_BUF_UNDELAYWRITE(sbp);
- XFS_BUF_WRITE(sbp);
- XFS_BUF_UNASYNC(sbp);
- XFS_BUF_ORDERED(sbp);
-
- xfsbdstrat(mp, sbp);
- error = xfs_buf_iowait(sbp);
-
- /*
- * Clear all the flags we set and possible error state in the
- * buffer. We only did the write to try out whether barriers
- * worked and shouldn't leave any traces in the superblock
- * buffer.
- */
- XFS_BUF_DONE(sbp);
- XFS_BUF_ERROR(sbp, 0);
- XFS_BUF_UNORDERED(sbp);
-
- xfs_buf_relse(sbp);
- return error;
-}
-
-STATIC void
-xfs_mountfs_check_barriers(xfs_mount_t *mp)
-{
- int error;
-
- if (mp->m_logdev_targp != mp->m_ddev_targp) {
- xfs_notice(mp,
- "Disabling barriers, not supported with external log device");
- mp->m_flags &= ~XFS_MOUNT_BARRIER;
- return;
- }
-
- if (xfs_readonly_buftarg(mp->m_ddev_targp)) {
- xfs_notice(mp,
- "Disabling barriers, underlying device is readonly");
- mp->m_flags &= ~XFS_MOUNT_BARRIER;
- return;
- }
-
- error = xfs_barrier_test(mp);
- if (error) {
- xfs_notice(mp,
- "Disabling barriers, trial barrier write failed");
- mp->m_flags &= ~XFS_MOUNT_BARRIER;
- return;
- }
-}
-
void
xfs_blkdev_issue_flush(
xfs_buftarg_t *buftarg)
switch (token) {
case Opt_barrier:
mp->m_flags |= XFS_MOUNT_BARRIER;
-
- /*
- * Test if barriers are actually working if we can,
- * else delay this check until the filesystem is
- * marked writeable.
- */
- if (!(mp->m_flags & XFS_MOUNT_RDONLY))
- xfs_mountfs_check_barriers(mp);
break;
case Opt_nobarrier:
mp->m_flags &= ~XFS_MOUNT_BARRIER;
/* ro -> rw */
if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
mp->m_flags &= ~XFS_MOUNT_RDONLY;
- if (mp->m_flags & XFS_MOUNT_BARRIER)
- xfs_mountfs_check_barriers(mp);
/*
* If this is the first remount to writeable state we
if (error)
goto out_free_sb;
- if (mp->m_flags & XFS_MOUNT_BARRIER)
- xfs_mountfs_check_barriers(mp);
-
error = xfs_filestream_mount(mp);
if (error)
goto out_free_sb;
XFS_BUF_ASYNC(bp);
bp->b_flags |= XBF_LOG_BUFFER;
- if (log->l_mp->m_flags & XFS_MOUNT_BARRIER)
+ if (log->l_mp->m_flags & XFS_MOUNT_BARRIER) {
+ /*
+ * If we have an external log device, flush the data device
+ * before flushing the log to make sure all meta data
+ * written back from the AIL actually made it to disk
+ * before writing out the new log tail LSN in the log buffer.
+ */
+ if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp)
+ xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp);
XFS_BUF_ORDERED(bp);
+ }
ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
extern int __gpio_to_irq(unsigned gpio);
-#define GPIOF_DIR_OUT (0 << 0)
-#define GPIOF_DIR_IN (1 << 0)
-
-#define GPIOF_INIT_LOW (0 << 1)
-#define GPIOF_INIT_HIGH (1 << 1)
-
-#define GPIOF_IN (GPIOF_DIR_IN)
-#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
-#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
-
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
pmd_t pmd = *pmdp;
pmd_clear(mm, address, pmdp);
return pmd;
-})
+}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
uint32_t force_encoder_id;
struct drm_encoder *encoder; /* currently active encoder */
+
+ int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
};
/**
{0x1002, 0x9614, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9615, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9616, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9640, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9641, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9642, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/compiler.h>
+#include <linux/spinlock_types.h>
struct bgpio_pdata {
int base;
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
+ cycle_t cs_last;
cycle_t wd_last;
#endif
} ____cacheline_aligned;
#include <linux/fs.h>
#ifdef CONFIG_CGROUP_DEVICE
-extern int devcgroup_inode_permission(struct inode *inode, int mask);
+extern int __devcgroup_inode_permission(struct inode *inode, int mask);
extern int devcgroup_inode_mknod(int mode, dev_t dev);
+static inline int devcgroup_inode_permission(struct inode *inode, int mask)
+{
+ if (likely(!inode->i_rdev))
+ return 0;
+ if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
+ return 0;
+ return __devcgroup_inode_permission(inode, mask);
+}
#else
static inline int devcgroup_inode_permission(struct inode *inode, int mask)
{ return 0; }
__u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autonet' here non-zero to have the
+ * being true) the user may set 'autoneg' here non-zero to have the
* pause parameters be auto-negotiated too. In such a case, the
* {rx,tx}_pause values below determine what capabilities are
* advertised.
* @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
* are turned on or off.
* @set_tx_csum: Deprecated in favour of generic netdev features. Turn
- * transmit checksums on or off. Returns a egative error code or zero.
+ * transmit checksums on or off. Returns a negative error code or zero.
* @get_sg: Deprecated as redundant. Report whether scatter-gather is
* enabled.
* @set_sg: Deprecated in favour of generic netdev features. Turn
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
* devices settings, these indicate the current mode and whether
- * it was foced up into this mode or autonegotiated.
+ * it was forced up into this mode or autonegotiated.
*/
/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+#define MS_NOSEC (1<<28)
#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
unsigned int i_flags;
+ unsigned long i_state;
+#ifdef CONFIG_SECURITY
+ void *i_security;
+#endif
struct mutex i_mutex;
- unsigned long i_state;
+
unsigned long dirtied_when; /* jiffies of first dirtying */
struct hlist_node i_hash;
atomic_t i_readcount; /* struct files open RO */
#endif
atomic_t i_writecount;
-#ifdef CONFIG_SECURITY
- void *i_security;
-#endif
#ifdef CONFIG_FS_POSIX_ACL
struct posix_acl *i_acl;
struct posix_acl *i_default_acl;
static inline void inode_has_no_xattr(struct inode *inode)
{
- if (!is_sxid(inode->i_mode))
+ if (!is_sxid(inode->i_mode) && (inode->i_sb->s_flags & MS_NOSEC))
inode->i_flags |= S_NOSEC;
}
/* see Documentation/gpio.txt */
+/* make these flag values available regardless of GPIO kconfig options */
+#define GPIOF_DIR_OUT (0 << 0)
+#define GPIOF_DIR_IN (1 << 0)
+
+#define GPIOF_INIT_LOW (0 << 1)
+#define GPIOF_INIT_HIGH (1 << 1)
+
+#define GPIOF_IN (GPIOF_DIR_IN)
+#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
+#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+
#ifdef CONFIG_GENERIC_GPIO
#include <asm/gpio.h>
--- /dev/null
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8870
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8870_H
+#define __LINUX_I2C_ADP8870_H
+
+#define ID_ADP8870 8870
+
+#define ADP8870_MAX_BRIGHTNESS 0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT)
+
+#define ADP8870_LED_ONT_200ms 0
+#define ADP8870_LED_ONT_600ms 1
+#define ADP8870_LED_ONT_800ms 2
+#define ADP8870_LED_ONT_1200ms 3
+
+#define ADP8870_LED_D7 (7)
+#define ADP8870_LED_D6 (6)
+#define ADP8870_LED_D5 (5)
+#define ADP8870_LED_D4 (4)
+#define ADP8870_LED_D3 (3)
+#define ADP8870_LED_D2 (2)
+#define ADP8870_LED_D1 (1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8870_BL_D7 (1 << 6)
+#define ADP8870_BL_D6 (1 << 5)
+#define ADP8870_BL_D5 (1 << 4)
+#define ADP8870_BL_D4 (1 << 3)
+#define ADP8870_BL_D3 (1 << 2)
+#define ADP8870_BL_D2 (1 << 1)
+#define ADP8870_BL_D1 (1 << 0)
+
+#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */
+#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */
+#define ADP8870_FADE_T_600ms 2
+#define ADP8870_FADE_T_900ms 3
+#define ADP8870_FADE_T_1200ms 4
+#define ADP8870_FADE_T_1500ms 5
+#define ADP8870_FADE_T_1800ms 6
+#define ADP8870_FADE_T_2100ms 7
+#define ADP8870_FADE_T_2400ms 8
+#define ADP8870_FADE_T_2700ms 9
+#define ADP8870_FADE_T_3000ms 10
+#define ADP8870_FADE_T_3500ms 11
+#define ADP8870_FADE_T_4000ms 12
+#define ADP8870_FADE_T_4500ms 13
+#define ADP8870_FADE_T_5000ms 14
+#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */
+
+#define ADP8870_FADE_LAW_LINEAR 0
+#define ADP8870_FADE_LAW_SQUARE 1
+#define ADP8870_FADE_LAW_CUBIC1 2
+#define ADP8870_FADE_LAW_CUBIC2 3
+
+#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */
+#define ADP8870_BL_AMBL_FILT_160ms 1
+#define ADP8870_BL_AMBL_FILT_320ms 2
+#define ADP8870_BL_AMBL_FILT_640ms 3
+#define ADP8870_BL_AMBL_FILT_1280ms 4
+#define ADP8870_BL_AMBL_FILT_2560ms 5
+#define ADP8870_BL_AMBL_FILT_5120ms 6
+#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..551uA
+ */
+#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551)
+
+/*
+ * L4 comparator current 0..275uA
+ */
+#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275)
+
+/*
+ * L5 comparator current 0..138uA
+ */
+#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138)
+
+struct adp8870_backlight_platform_data {
+ u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */
+ u8 pwm_assign; /* 1 = Enables PWM mode */
+
+ u8 bl_fade_in; /* Backlight Fade-In Timer */
+ u8 bl_fade_out; /* Backlight Fade-Out Timer */
+ u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */
+
+ u8 en_ambl_sens; /* 1 = enable ambient light sensor */
+ u8 abml_filt; /* Light sensor filter time */
+
+ u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+ u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+ /**
+ * Independent Current Sinks / LEDS
+ * Sinks not assigned to the Backlight can be exposed to
+ * user space using the LEDS CLASS interface
+ */
+
+ int num_leds;
+ struct led_info *leds;
+ u8 led_fade_in; /* LED Fade-In Timer */
+ u8 led_fade_out; /* LED Fade-Out Timer */
+ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
+ u8 led_on_time;
+};
+
+#endif /* __LINUX_I2C_ADP8870_H */
__u16 tp_mac;
__u16 tp_net;
__u16 tp_vlan_tci;
+ __u16 tp_padding;
};
/* Rx ring - header status */
__u32 tp_sec;
__u32 tp_nsec;
__u16 tp_vlan_tci;
+ __u16 tp_padding;
};
#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
}
/**
- * __vlan_put_tag - regular VLAN tag inserting
+ * vlan_insert_tag - regular VLAN tag inserting
* @skb: skbuff to tag
* @vlan_tci: VLAN TCI to insert
*
*
* Following the skb_unshare() example, in case of error, the calling function
* doesn't have to worry about freeing the original skb.
+ *
+ * Does not change skb->protocol so this function can be used during receive.
*/
-static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, u16 vlan_tci)
{
struct vlan_ethhdr *veth;
/* now, the TCI */
veth->h_vlan_TCI = htons(vlan_tci);
- skb->protocol = htons(ETH_P_8021Q);
+ return skb;
+}
+/**
+ * __vlan_put_tag - regular VLAN tag inserting
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Inserts the VLAN tag into @skb as part of the payload
+ * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
+ *
+ * Following the skb_unshare() example, in case of error, the calling function
+ * doesn't have to worry about freeing the original skb.
+ */
+static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+{
+ skb = vlan_insert_tag(skb, vlan_tci);
+ if (skb)
+ skb->protocol = htons(ETH_P_8021Q);
return skb;
}
#ifndef __SH_KEYSC_H__
#define __SH_KEYSC_H__
-#define SH_KEYSC_MAXKEYS 49
+#define SH_KEYSC_MAXKEYS 64
struct sh_keysc_info {
enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3,
TASKLET_SOFTIRQ,
SCHED_SOFTIRQ,
HRTIMER_SOFTIRQ,
+ RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
NR_SOFTIRQS
};
* @IRQ_WAKE_THREAD handler requests to wake the handler thread
*/
enum irqreturn {
- IRQ_NONE,
- IRQ_HANDLED,
- IRQ_WAKE_THREAD,
+ IRQ_NONE = (0 << 0),
+ IRQ_HANDLED = (1 << 0),
+ IRQ_WAKE_THREAD = (1 << 1),
};
typedef enum irqreturn irqreturn_t;
#ifdef __CHECKER__
#define BUILD_BUG_ON_NOT_POWER_OF_2(n)
-#define BUILD_BUG_ON_ZERO(e)
-#define BUILD_BUG_ON_NULL(e)
+#define BUILD_BUG_ON_ZERO(e) (0)
+#define BUILD_BUG_ON_NULL(e) ((void*)0)
#define BUILD_BUG_ON(condition)
#else /* __CHECKER__ */
#endif
-struct key;
+struct cred;
struct file;
enum umh_wait {
char **envp;
enum umh_wait wait;
int retval;
- int (*init)(struct subprocess_info *info);
+ int (*init)(struct subprocess_info *info, struct cred *new);
void (*cleanup)(struct subprocess_info *info);
void *data;
};
/* Set various pieces of state into the subprocess_info structure */
void call_usermodehelper_setfns(struct subprocess_info *info,
- int (*init)(struct subprocess_info *info),
+ int (*init)(struct subprocess_info *info, struct cred *new),
void (*cleanup)(struct subprocess_info *info),
void *data);
static inline int
call_usermodehelper_fns(char *path, char **argv, char **envp,
enum umh_wait wait,
- int (*init)(struct subprocess_info *info),
+ int (*init)(struct subprocess_info *info, struct cred *new),
void (*cleanup)(struct subprocess_info *), void *data)
{
struct subprocess_info *info;
#ifndef _LINUX_KMSG_DUMP_H
#define _LINUX_KMSG_DUMP_H
+#include <linux/errno.h>
#include <linux/list.h>
enum kmsg_dump_reason {
/*
* Callbacks so sysfs can determine namespaces
- * @current_ns: return calling task's namespace
+ * @grab_current_ns: return a new reference to calling task's namespace
* @netlink_ns: return namespace to which a sock belongs (right?)
* @initial_ns: return the initial namespace (i.e. init_net_ns)
+ * @drop_ns: drops a reference to namespace
*/
struct kobj_ns_type_operations {
enum kobj_ns_type type;
- const void *(*current_ns)(void);
+ void *(*grab_current_ns)(void);
const void *(*netlink_ns)(struct sock *sk);
const void *(*initial_ns)(void);
+ void (*drop_ns)(void *);
};
int kobj_ns_type_register(const struct kobj_ns_type_operations *ops);
const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent);
const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj);
-const void *kobj_ns_current(enum kobj_ns_type type);
+void *kobj_ns_grab_current(enum kobj_ns_type type);
const void *kobj_ns_netlink(enum kobj_ns_type type, struct sock *sk);
const void *kobj_ns_initial(enum kobj_ns_type type);
-void kobj_ns_exit(enum kobj_ns_type type, const void *ns);
+void kobj_ns_drop(enum kobj_ns_type type, void *ns);
#endif /* _LINUX_KOBJECT_NS_H */
extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
+extern struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm);
static inline
int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
return NULL;
}
+static inline struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+{
+ return NULL;
+}
+
static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
{
return 1;
extern struct kobj_ns_type_operations net_ns_type_operations;
-extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
+extern const char *netdev_drivername(const struct net_device *dev);
extern void linkwatch_run_queue(void);
/* >= this indicates reply direction */
IP_CT_IS_REPLY,
+ IP_CT_ESTABLISHED_REPLY = IP_CT_ESTABLISHED + IP_CT_IS_REPLY,
+ IP_CT_RELATED_REPLY = IP_CT_RELATED + IP_CT_IS_REPLY,
+ IP_CT_NEW_REPLY = IP_CT_NEW + IP_CT_IS_REPLY,
/* Number of distinct IP_CT types (no NEW in reply dirn). */
IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1
};
* Special handling for cmpxchg_double. cmpxchg_double is passed two
* percpu variables. The first has to be aligned to a double word
* boundary and the second has to follow directly thereafter.
+ * We enforce this on all architectures even if they don't support
+ * a double cmpxchg instruction, since it's a cheap requirement, and it
+ * avoids breaking the requirement for architectures with the instruction.
*/
#define __pcpu_double_call_return_bool(stem, pcp1, pcp2, ...) \
({ \
*
* struct read_format {
* { u64 value;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
* { u64 id; } && PERF_FORMAT_ID
* } && !PERF_FORMAT_GROUP
*
* { u64 nr;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
* { u64 value;
* { u64 id; } && PERF_FORMAT_ID
* } cntr[nr];
*/
#define WF_SYNC 0x01 /* waker goes to sleep after wakup */
#define WF_FORK 0x02 /* child wakeup after fork */
+#define WF_MIGRATED 0x04 /* internal use, task got migrated */
#define ENQUEUE_WAKEUP 1
#define ENQUEUE_HEAD 2
#include <linux/spinlock.h>
#include <linux/preempt.h>
+#include <asm/processor.h>
typedef struct {
unsigned sequence;
skb->tail += len;
}
+static inline void skb_reset_mac_len(struct sk_buff *skb)
+{
+ skb->mac_len = skb->network_header - skb->mac_header;
+}
+
#ifdef NET_SKBUFF_DATA_USES_OFFSET
static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
{
* Generic and arch helpers
*/
#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
+void __init call_function_init(void);
void generic_smp_call_function_single_interrupt(void);
void generic_smp_call_function_interrupt(void);
void ipi_call_lock(void);
void ipi_call_unlock(void);
void ipi_call_lock_irq(void);
void ipi_call_unlock_irq(void);
+#else
+static inline void call_function_init(void) { }
#endif
/*
#define smp_prepare_boot_cpu() do {} while (0)
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
-static inline void init_call_single_data(void) { }
+static inline void call_function_init(void) { }
static inline int
smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
--- /dev/null
+/*
+ * Dumb way to share this static piece of information with nfsd
+ */
+#define KRB5_SUPPORTED_ENCTYPES "18,17,16,23,3,1,2"
extern struct mm_struct *swap_token_mm;
extern void grab_swap_token(struct mm_struct *);
extern void __put_swap_token(struct mm_struct *);
+extern void disable_swap_token(struct mem_cgroup *memcg);
static inline int has_swap_token(struct mm_struct *mm)
{
__put_swap_token(mm);
}
-static inline void disable_swap_token(void)
-{
- put_swap_token(swap_token_mm);
-}
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
extern void
mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
return 0;
}
-static inline void disable_swap_token(void)
+static inline void disable_swap_token(struct mem_cgroup *memcg)
{
}
extern void swiotlb_init(int verbose);
extern void swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
+extern unsigned long swioltb_nr_tbl(void);
/*
* Enumeration for sync targets
struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
void sysfs_put(struct sysfs_dirent *sd);
-/* Called to clear a ns tag when it is no longer valid */
-void sysfs_exit_ns(enum kobj_ns_type type, const void *tag);
-
int __must_check sysfs_init(void);
#else /* CONFIG_SYSFS */
{
}
-static inline void sysfs_exit_ns(int type, const void *tag)
-{
-}
-
static inline int __must_check sysfs_init(void)
{
return 0;
* (in whatever arch specific measurement units returned by node_distance())
* then switch on zone reclaim on boot.
*/
-#define RECLAIM_DISTANCE 20
+#define RECLAIM_DISTANCE 30
#endif
#ifndef PENALTY_FOR_NODE_WITH_CPUS
#define PENALTY_FOR_NODE_WITH_CPUS (1)
US_FLAG(NO_READ_DISC_INFO, 0x00040000) \
/* cannot handle READ_DISC_INFO */ \
US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \
- /* cannot handle READ_CAPACITY_16 */
+ /* cannot handle READ_CAPACITY_16 */ \
+ US_FLAG(INITIAL_READ10, 0x00100000) \
+ /* Initial READ(10) (and others) must be retried */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
#endif
#ifndef UTS_NODENAME
-#define UTS_NODENAME "(none)" /* set by sethostname() */
+#define UTS_NODENAME CONFIG_DEFAULT_HOSTNAME /* set by sethostname() */
#endif
#ifndef UTS_DOMAINNAME
struct mutex *lock;
};
-#define media_entity_to_video_device(entity) \
- container_of(entity, struct video_device, entity)
+#define media_entity_to_video_device(__e) \
+ container_of(__e, struct video_device, entity)
/* dev to video-device */
#define to_video_device(cd) container_of(cd, struct video_device, dev)
#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
struct net {
+ atomic_t passive; /* To decided when the network
+ * namespace should be freed.
+ */
atomic_t count; /* To decided when the network
- * namespace should be freed.
+ * namespace should be shut down.
*/
#ifdef NETNS_REFCNT_DEBUG
atomic_t use_count; /* To track references we
{
return net1 == net2;
}
+
+extern void net_drop_ns(void *);
+
#else
static inline struct net *get_net(struct net *net)
{
return 1;
}
+
+#define net_drop_ns NULL
#endif
return test_bit(IPS_UNTRACKED_BIT, &ct->status);
}
+/* Packet is received from loopback */
+static inline bool nf_is_loopback_packet(const struct sk_buff *skb)
+{
+ return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK;
+}
+
extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
extern unsigned int nf_conntrack_htable_size;
extern unsigned int nf_conntrack_max;
softirq_name(BLOCK_IOPOLL), \
softirq_name(TASKLET), \
softirq_name(SCHED), \
- softirq_name(HRTIMER))
+ softirq_name(HRTIMER), \
+ softirq_name(RCU))
/**
* irq_handler_entry - called immediately before the irq action handler
#include <linux/types.h>
#include <linux/tracepoint.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
#include "gfpflags.h"
#define RECLAIM_WB_ANON 0x0001u
show_reclaim_flags(__entry->reclaim_flags))
);
+TRACE_EVENT(replace_swap_token,
+ TP_PROTO(struct mm_struct *old_mm,
+ struct mm_struct *new_mm),
+
+ TP_ARGS(old_mm, new_mm),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, old_mm)
+ __field(unsigned int, old_prio)
+ __field(struct mm_struct*, new_mm)
+ __field(unsigned int, new_prio)
+ ),
+
+ TP_fast_assign(
+ __entry->old_mm = old_mm;
+ __entry->old_prio = old_mm ? old_mm->token_priority : 0;
+ __entry->new_mm = new_mm;
+ __entry->new_prio = new_mm->token_priority;
+ ),
+
+ TP_printk("old_token_mm=%p old_prio=%u new_token_mm=%p new_prio=%u",
+ __entry->old_mm, __entry->old_prio,
+ __entry->new_mm, __entry->new_prio)
+);
+
+DECLARE_EVENT_CLASS(put_swap_token_template,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+
+ TP_ARGS(swap_token_mm),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, swap_token_mm)
+ ),
+
+ TP_fast_assign(
+ __entry->swap_token_mm = swap_token_mm;
+ ),
+
+ TP_printk("token_mm=%p", __entry->swap_token_mm)
+);
+
+DEFINE_EVENT(put_swap_token_template, put_swap_token,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+ TP_ARGS(swap_token_mm)
+);
+
+DEFINE_EVENT_CONDITION(put_swap_token_template, disable_swap_token,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+ TP_ARGS(swap_token_mm),
+ TP_CONDITION(swap_token_mm != NULL)
+);
+
+TRACE_EVENT_CONDITION(update_swap_token_priority,
+ TP_PROTO(struct mm_struct *mm,
+ unsigned int old_prio,
+ struct mm_struct *swap_token_mm),
+
+ TP_ARGS(mm, old_prio, swap_token_mm),
+
+ TP_CONDITION(mm->token_priority != old_prio),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, mm)
+ __field(unsigned int, old_prio)
+ __field(unsigned int, new_prio)
+ __field(struct mm_struct*, swap_token_mm)
+ __field(unsigned int, swap_token_prio)
+ ),
+
+ TP_fast_assign(
+ __entry->mm = mm;
+ __entry->old_prio = old_prio;
+ __entry->new_prio = mm->token_priority;
+ __entry->swap_token_mm = swap_token_mm;
+ __entry->swap_token_prio = swap_token_mm ? swap_token_mm->token_priority : 0;
+ ),
+
+ TP_printk("mm=%p old_prio=%u new_prio=%u swap_token_mm=%p token_prio=%u",
+ __entry->mm, __entry->old_prio, __entry->new_prio,
+ __entry->swap_token_mm, __entry->swap_token_prio)
+);
#endif /* _TRACE_VMSCAN_H */
config CONSTRUCTORS
bool
depends on !UML
- default y
config HAVE_IRQ_WORK
bool
endchoice
+config DEFAULT_HOSTNAME
+ string "Default hostname"
+ default "(none)"
+ help
+ This option determines the default system hostname before userspace
+ calls sethostname(2). The kernel traditionally uses "(none)" here,
+ but you may wish to use a different default here to make a minimal
+ system more usable with less configuration.
+
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU && BLOCK
* If the upper limit and lower limit of the timer_rate is
* >= 12.5% apart, redo calibration.
*/
- printk(KERN_DEBUG "calibrate_delay_direct() timer_rate_max=%lu "
- "timer_rate_min=%lu pre_start=%lu pre_end=%lu\n",
- timer_rate_max, timer_rate_min, pre_start, pre_end);
if (start >= post_end)
printk(KERN_NOTICE "calibrate_delay_direct() ignoring "
"timer_rate as we had a TSC wrap around"
timekeeping_init();
time_init();
profile_init();
+ call_function_init();
if (!irqs_disabled())
printk(KERN_CRIT "start_kernel(): bug: interrupts were "
"enabled early\n");
return 0;
}
-static void perf_cgroup_move(struct task_struct *task)
+static void
+perf_cgroup_attach_task(struct cgroup *cgrp, struct task_struct *task)
{
task_function_call(task, __perf_cgroup_move, task);
}
-static void perf_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cgrp, struct task_struct *task,
- bool threadgroup)
-{
- perf_cgroup_move(task);
- if (threadgroup) {
- struct task_struct *c;
- rcu_read_lock();
- list_for_each_entry_rcu(c, &task->thread_group, thread_group) {
- perf_cgroup_move(c);
- }
- rcu_read_unlock();
- }
-}
-
static void perf_cgroup_exit(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct cgroup *old_cgrp, struct task_struct *task)
{
if (!(task->flags & PF_EXITING))
return;
- perf_cgroup_move(task);
+ perf_cgroup_attach_task(cgrp, task);
}
struct cgroup_subsys perf_subsys = {
.create = perf_cgroup_create,
.destroy = perf_cgroup_destroy,
.exit = perf_cgroup_exit,
- .attach = perf_cgroup_attach,
+ .attach_task = perf_cgroup_attach_task,
};
#endif /* CONFIG_CGROUP_PERF */
#ifdef CONFIG_MM_OWNER
/*
- * Task p is exiting and it owned mm, lets find a new owner for it
+ * A task is exiting. If it owned this mm, find a new owner for the mm.
*/
-static inline int
-mm_need_new_owner(struct mm_struct *mm, struct task_struct *p)
-{
- /*
- * If there are other users of the mm and the owner (us) is exiting
- * we need to find a new owner to take on the responsibility.
- */
- if (atomic_read(&mm->mm_users) <= 1)
- return 0;
- if (mm->owner != p)
- return 0;
- return 1;
-}
-
void mm_update_next_owner(struct mm_struct *mm)
{
struct task_struct *c, *g, *p = current;
retry:
- if (!mm_need_new_owner(mm, p))
+ /*
+ * If the exiting or execing task is not the owner, it's
+ * someone else's problem.
+ */
+ if (mm->owner != p)
return;
+ /*
+ * The current owner is exiting/execing and there are no other
+ * candidates. Do not leave the mm pointing to a possibly
+ * freed task structure.
+ */
+ if (atomic_read(&mm->mm_users) <= 1) {
+ mm->owner = NULL;
+ return;
+ }
read_lock(&tasklist_lock);
/*
config GCOV_KERNEL
bool "Enable gcov-based kernel profiling"
- depends on DEBUG_FS && CONSTRUCTORS
+ depends on DEBUG_FS
+ select CONSTRUCTORS
default n
---help---
This option enables gcov-based code profiling (e.g. for code coverage
switch (res) {
case IRQ_WAKE_THREAD:
- /*
- * Set result to handled so the spurious check
- * does not trigger.
- */
- res = IRQ_HANDLED;
-
/*
* Catch drivers which return WAKE_THREAD but
* did not set up a thread function
count = ARRAY_SIZE(irq_desc);
for (i = 0; i < count; i++) {
- desc[i].irq_data.irq = i;
- desc[i].irq_data.chip = &no_irq_chip;
desc[i].kstat_irqs = alloc_percpu(unsigned int);
- irq_settings_clr_and_set(desc, ~0, _IRQ_DEFAULT_INIT_FLAGS);
- alloc_masks(desc + i, GFP_KERNEL, node);
- desc_smp_init(desc + i, node);
+ alloc_masks(&desc[i], GFP_KERNEL, node);
+ raw_spin_lock_init(&desc[i].lock);
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
+ desc_set_defaults(i, &desc[i], node);
}
return arch_early_irq_init();
}
if (!cnt)
return -EINVAL;
+ if (irq >= 0) {
+ if (from > irq)
+ return -EINVAL;
+ from = irq;
+ }
+
mutex_lock(&sparse_irq_lock);
start = bitmap_find_next_zero_area(allocated_irqs, IRQ_BITMAP_BITS,
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
int ret = 0;
+ if (!desc)
+ return -EINVAL;
+
/* wakeup-capable irqs can be shared between drivers that
* don't need to have the same sleep mode behaviors.
*/
* context. So we need to disable bh here to avoid deadlocks and other
* side effects.
*/
-static void
+static irqreturn_t
irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
{
+ irqreturn_t ret;
+
local_bh_disable();
- action->thread_fn(action->irq, action->dev_id);
+ ret = action->thread_fn(action->irq, action->dev_id);
irq_finalize_oneshot(desc, action, false);
local_bh_enable();
+ return ret;
}
/*
* preemtible - many of them need to sleep and wait for slow busses to
* complete.
*/
-static void irq_thread_fn(struct irq_desc *desc, struct irqaction *action)
+static irqreturn_t irq_thread_fn(struct irq_desc *desc,
+ struct irqaction *action)
{
- action->thread_fn(action->irq, action->dev_id);
+ irqreturn_t ret;
+
+ ret = action->thread_fn(action->irq, action->dev_id);
irq_finalize_oneshot(desc, action, false);
+ return ret;
}
/*
};
struct irqaction *action = data;
struct irq_desc *desc = irq_to_desc(action->irq);
- void (*handler_fn)(struct irq_desc *desc, struct irqaction *action);
+ irqreturn_t (*handler_fn)(struct irq_desc *desc,
+ struct irqaction *action);
int wake;
if (force_irqthreads & test_bit(IRQTF_FORCED_THREAD,
desc->istate |= IRQS_PENDING;
raw_spin_unlock_irq(&desc->lock);
} else {
+ irqreturn_t action_ret;
+
raw_spin_unlock_irq(&desc->lock);
- handler_fn(desc, action);
+ action_ret = handler_fn(desc, action);
+ if (!noirqdebug)
+ note_interrupt(action->irq, desc, action_ret);
}
wake = atomic_dec_and_test(&desc->threads_active);
jiffies + POLL_SPURIOUS_IRQ_INTERVAL);
}
+static inline int bad_action_ret(irqreturn_t action_ret)
+{
+ if (likely(action_ret <= (IRQ_HANDLED | IRQ_WAKE_THREAD)))
+ return 0;
+ return 1;
+}
+
/*
* If 99,900 of the previous 100,000 interrupts have not been handled
* then assume that the IRQ is stuck in some manner. Drop a diagnostic
struct irqaction *action;
unsigned long flags;
- if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
+ if (bad_action_ret(action_ret)) {
printk(KERN_ERR "irq event %d: bogus return value %x\n",
irq, action_ret);
} else {
raw_spin_lock_irqsave(&desc->lock, flags);
action = desc->action;
while (action) {
- printk(KERN_ERR "[<%p>]", action->handler);
- print_symbol(" (%s)",
- (unsigned long)action->handler);
- printk("\n");
+ printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler);
+ if (action->thread_fn)
+ printk(KERN_CONT " threaded [<%p>] %pf",
+ action->thread_fn, action->thread_fn);
+ printk(KERN_CONT "\n");
action = action->next;
}
raw_spin_unlock_irqrestore(&desc->lock, flags);
if (desc->istate & IRQS_POLL_INPROGRESS)
return;
- if (unlikely(action_ret != IRQ_HANDLED)) {
+ /* we get here again via the threaded handler */
+ if (action_ret == IRQ_WAKE_THREAD)
+ return;
+
+ if (bad_action_ret(action_ret)) {
+ report_bad_irq(irq, desc, action_ret);
+ return;
+ }
+
+ if (unlikely(action_ret == IRQ_NONE)) {
/*
* If we are seeing only the odd spurious IRQ caused by
* bus asynchronicity then don't eventually trigger an error,
else
desc->irqs_unhandled++;
desc->last_unhandled = jiffies;
- if (unlikely(action_ret != IRQ_NONE))
- report_bad_irq(irq, desc, action_ret);
}
if (unlikely(try_misrouted_irq(irq, desc, action_ret))) {
*/
set_user_nice(current, 0);
- if (sub_info->init) {
- retval = sub_info->init(sub_info);
- if (retval)
- goto fail;
- }
-
retval = -ENOMEM;
new = prepare_kernel_cred(current);
if (!new)
new->cap_inheritable);
spin_unlock(&umh_sysctl_lock);
+ if (sub_info->init) {
+ retval = sub_info->init(sub_info, new);
+ if (retval) {
+ abort_creds(new);
+ goto fail;
+ }
+ }
+
commit_creds(new);
retval = kernel_execve(sub_info->path,
* context in which call_usermodehelper_exec is called.
*/
void call_usermodehelper_setfns(struct subprocess_info *info,
- int (*init)(struct subprocess_info *info),
+ int (*init)(struct subprocess_info *info, struct cred *new),
void (*cleanup)(struct subprocess_info *info),
void *data)
{
int ret = 0;
if (unlikely(current->lockdep_recursion))
- return ret;
+ return 1; /* avoid false negative lockdep_assert_held() */
raw_local_irq_save(flags);
check_flags(flags);
int rcu_scheduler_active __read_mostly;
EXPORT_SYMBOL_GPL(rcu_scheduler_active);
+#ifdef CONFIG_RCU_BOOST
+
/*
* Control variables for per-CPU and per-rcu_node kthreads. These
* handle all flavors of RCU.
DEFINE_PER_CPU(char, rcu_cpu_has_work);
static char rcu_kthreads_spawnable;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
-static void invoke_rcu_cpu_kthread(void);
+static void invoke_rcu_core(void);
+static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
#define RCU_KTHREAD_PRIO 1 /* RT priority for per-CPU kthreads. */
int need_report = 0;
struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
struct rcu_node *rnp;
- struct task_struct *t;
- /* Stop the CPU's kthread. */
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t != NULL) {
- per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
- kthread_stop(t);
- }
+ rcu_stop_cpu_kthread(cpu);
/* Exclude any attempts to start a new grace period. */
raw_spin_lock_irqsave(&rsp->onofflock, flags);
/* Re-raise the RCU softirq if there are callbacks remaining. */
if (cpu_has_callbacks_ready_to_invoke(rdp))
- invoke_rcu_cpu_kthread();
+ invoke_rcu_core();
}
/*
}
rcu_preempt_check_callbacks(cpu);
if (rcu_pending(cpu))
- invoke_rcu_cpu_kthread();
+ invoke_rcu_core();
}
#ifdef CONFIG_SMP
}
/* If there are callbacks ready, invoke them. */
- rcu_do_batch(rsp, rdp);
+ if (cpu_has_callbacks_ready_to_invoke(rdp))
+ invoke_rcu_callbacks(rsp, rdp);
}
/*
* Do softirq processing for the current CPU.
*/
-static void rcu_process_callbacks(void)
+static void rcu_process_callbacks(struct softirq_action *unused)
{
__rcu_process_callbacks(&rcu_sched_state,
&__get_cpu_var(rcu_sched_data));
* the current CPU with interrupts disabled, the rcu_cpu_kthread_task
* cannot disappear out from under us.
*/
-static void invoke_rcu_cpu_kthread(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __this_cpu_write(rcu_cpu_has_work, 1);
- if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) {
- local_irq_restore(flags);
- return;
- }
- wake_up_process(__this_cpu_read(rcu_cpu_kthread_task));
- local_irq_restore(flags);
-}
-
-/*
- * Wake up the specified per-rcu_node-structure kthread.
- * Because the per-rcu_node kthreads are immortal, we don't need
- * to do anything to keep them alive.
- */
-static void invoke_rcu_node_kthread(struct rcu_node *rnp)
-{
- struct task_struct *t;
-
- t = rnp->node_kthread_task;
- if (t != NULL)
- wake_up_process(t);
-}
-
-/*
- * Set the specified CPU's kthread to run RT or not, as specified by
- * the to_rt argument. The CPU-hotplug locks are held, so the task
- * is not going away.
- */
-static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
-{
- int policy;
- struct sched_param sp;
- struct task_struct *t;
-
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t == NULL)
- return;
- if (to_rt) {
- policy = SCHED_FIFO;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- } else {
- policy = SCHED_NORMAL;
- sp.sched_priority = 0;
- }
- sched_setscheduler_nocheck(t, policy, &sp);
-}
-
-/*
- * Timer handler to initiate the waking up of per-CPU kthreads that
- * have yielded the CPU due to excess numbers of RCU callbacks.
- * We wake up the per-rcu_node kthread, which in turn will wake up
- * the booster kthread.
- */
-static void rcu_cpu_kthread_timer(unsigned long arg)
-{
- struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
- struct rcu_node *rnp = rdp->mynode;
-
- atomic_or(rdp->grpmask, &rnp->wakemask);
- invoke_rcu_node_kthread(rnp);
-}
-
-/*
- * Drop to non-real-time priority and yield, but only after posting a
- * timer that will cause us to regain our real-time priority if we
- * remain preempted. Either way, we restore our real-time priority
- * before returning.
- */
-static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
-{
- struct sched_param sp;
- struct timer_list yield_timer;
-
- setup_timer_on_stack(&yield_timer, f, arg);
- mod_timer(&yield_timer, jiffies + 2);
- sp.sched_priority = 0;
- sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp);
- set_user_nice(current, 19);
- schedule();
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
- del_timer(&yield_timer);
-}
-
-/*
- * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
- * This can happen while the corresponding CPU is either coming online
- * or going offline. We cannot wait until the CPU is fully online
- * before starting the kthread, because the various notifier functions
- * can wait for RCU grace periods. So we park rcu_cpu_kthread() until
- * the corresponding CPU is online.
- *
- * Return 1 if the kthread needs to stop, 0 otherwise.
- *
- * Caller must disable bh. This function can momentarily enable it.
- */
-static int rcu_cpu_kthread_should_stop(int cpu)
-{
- while (cpu_is_offline(cpu) ||
- !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) ||
- smp_processor_id() != cpu) {
- if (kthread_should_stop())
- return 1;
- per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
- per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
- local_bh_enable();
- schedule_timeout_uninterruptible(1);
- if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)))
- set_cpus_allowed_ptr(current, cpumask_of(cpu));
- local_bh_disable();
- }
- per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
- return 0;
-}
-
-/*
- * Per-CPU kernel thread that invokes RCU callbacks. This replaces the
- * earlier RCU softirq.
- */
-static int rcu_cpu_kthread(void *arg)
-{
- int cpu = (int)(long)arg;
- unsigned long flags;
- int spincnt = 0;
- unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
- char work;
- char *workp = &per_cpu(rcu_cpu_has_work, cpu);
-
- for (;;) {
- *statusp = RCU_KTHREAD_WAITING;
- rcu_wait(*workp != 0 || kthread_should_stop());
- local_bh_disable();
- if (rcu_cpu_kthread_should_stop(cpu)) {
- local_bh_enable();
- break;
- }
- *statusp = RCU_KTHREAD_RUNNING;
- per_cpu(rcu_cpu_kthread_loops, cpu)++;
- local_irq_save(flags);
- work = *workp;
- *workp = 0;
- local_irq_restore(flags);
- if (work)
- rcu_process_callbacks();
- local_bh_enable();
- if (*workp != 0)
- spincnt++;
- else
- spincnt = 0;
- if (spincnt > 10) {
- *statusp = RCU_KTHREAD_YIELDING;
- rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
- spincnt = 0;
- }
- }
- *statusp = RCU_KTHREAD_STOPPED;
- return 0;
-}
-
-/*
- * Spawn a per-CPU kthread, setting up affinity and priority.
- * Because the CPU hotplug lock is held, no other CPU will be attempting
- * to manipulate rcu_cpu_kthread_task. There might be another CPU
- * attempting to access it during boot, but the locking in kthread_bind()
- * will enforce sufficient ordering.
- */
-static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
+static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
{
- struct sched_param sp;
- struct task_struct *t;
-
- if (!rcu_kthreads_spawnable ||
- per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
- return 0;
- t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
- if (IS_ERR(t))
- return PTR_ERR(t);
- kthread_bind(t, cpu);
- per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
- WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
- per_cpu(rcu_cpu_kthread_task, cpu) = t;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- return 0;
-}
-
-/*
- * Per-rcu_node kthread, which is in charge of waking up the per-CPU
- * kthreads when needed. We ignore requests to wake up kthreads
- * for offline CPUs, which is OK because force_quiescent_state()
- * takes care of this case.
- */
-static int rcu_node_kthread(void *arg)
-{
- int cpu;
- unsigned long flags;
- unsigned long mask;
- struct rcu_node *rnp = (struct rcu_node *)arg;
- struct sched_param sp;
- struct task_struct *t;
-
- for (;;) {
- rnp->node_kthread_status = RCU_KTHREAD_WAITING;
- rcu_wait(atomic_read(&rnp->wakemask) != 0);
- rnp->node_kthread_status = RCU_KTHREAD_RUNNING;
- raw_spin_lock_irqsave(&rnp->lock, flags);
- mask = atomic_xchg(&rnp->wakemask, 0);
- rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
- for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) {
- if ((mask & 0x1) == 0)
- continue;
- preempt_disable();
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (!cpu_online(cpu) || t == NULL) {
- preempt_enable();
- continue;
- }
- per_cpu(rcu_cpu_has_work, cpu) = 1;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- preempt_enable();
- }
- }
- /* NOTREACHED */
- rnp->node_kthread_status = RCU_KTHREAD_STOPPED;
- return 0;
-}
-
-/*
- * Set the per-rcu_node kthread's affinity to cover all CPUs that are
- * served by the rcu_node in question. The CPU hotplug lock is still
- * held, so the value of rnp->qsmaskinit will be stable.
- *
- * We don't include outgoingcpu in the affinity set, use -1 if there is
- * no outgoing CPU. If there are no CPUs left in the affinity set,
- * this function allows the kthread to execute on any CPU.
- */
-static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
-{
- cpumask_var_t cm;
- int cpu;
- unsigned long mask = rnp->qsmaskinit;
-
- if (rnp->node_kthread_task == NULL)
- return;
- if (!alloc_cpumask_var(&cm, GFP_KERNEL))
+ if (likely(!rsp->boost)) {
+ rcu_do_batch(rsp, rdp);
return;
- cpumask_clear(cm);
- for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
- if ((mask & 0x1) && cpu != outgoingcpu)
- cpumask_set_cpu(cpu, cm);
- if (cpumask_weight(cm) == 0) {
- cpumask_setall(cm);
- for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
- cpumask_clear_cpu(cpu, cm);
- WARN_ON_ONCE(cpumask_weight(cm) == 0);
}
- set_cpus_allowed_ptr(rnp->node_kthread_task, cm);
- rcu_boost_kthread_setaffinity(rnp, cm);
- free_cpumask_var(cm);
+ invoke_rcu_callbacks_kthread();
}
-/*
- * Spawn a per-rcu_node kthread, setting priority and affinity.
- * Called during boot before online/offline can happen, or, if
- * during runtime, with the main CPU-hotplug locks held. So only
- * one of these can be executing at a time.
- */
-static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
- struct rcu_node *rnp)
+static void invoke_rcu_core(void)
{
- unsigned long flags;
- int rnp_index = rnp - &rsp->node[0];
- struct sched_param sp;
- struct task_struct *t;
-
- if (!rcu_kthreads_spawnable ||
- rnp->qsmaskinit == 0)
- return 0;
- if (rnp->node_kthread_task == NULL) {
- t = kthread_create(rcu_node_kthread, (void *)rnp,
- "rcun%d", rnp_index);
- if (IS_ERR(t))
- return PTR_ERR(t);
- raw_spin_lock_irqsave(&rnp->lock, flags);
- rnp->node_kthread_task = t;
- raw_spin_unlock_irqrestore(&rnp->lock, flags);
- sp.sched_priority = 99;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- }
- return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
+ raise_softirq(RCU_SOFTIRQ);
}
-static void rcu_wake_one_boost_kthread(struct rcu_node *rnp);
-
-/*
- * Spawn all kthreads -- called as soon as the scheduler is running.
- */
-static int __init rcu_spawn_kthreads(void)
-{
- int cpu;
- struct rcu_node *rnp;
- struct task_struct *t;
-
- rcu_kthreads_spawnable = 1;
- for_each_possible_cpu(cpu) {
- per_cpu(rcu_cpu_has_work, cpu) = 0;
- if (cpu_online(cpu)) {
- (void)rcu_spawn_one_cpu_kthread(cpu);
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t)
- wake_up_process(t);
- }
- }
- rnp = rcu_get_root(rcu_state);
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- if (rnp->node_kthread_task)
- wake_up_process(rnp->node_kthread_task);
- if (NUM_RCU_NODES > 1) {
- rcu_for_each_leaf_node(rcu_state, rnp) {
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- t = rnp->node_kthread_task;
- if (t)
- wake_up_process(t);
- rcu_wake_one_boost_kthread(rnp);
- }
- }
- return 0;
-}
-early_initcall(rcu_spawn_kthreads);
-
static void
__call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
struct rcu_state *rsp)
rcu_preempt_init_percpu_data(cpu);
}
-static void __cpuinit rcu_prepare_kthreads(int cpu)
-{
- struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
- struct rcu_node *rnp = rdp->mynode;
-
- /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
- if (rcu_kthreads_spawnable) {
- (void)rcu_spawn_one_cpu_kthread(cpu);
- if (rnp->node_kthread_task == NULL)
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- }
-}
-
-/*
- * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
- * but the RCU threads are woken on demand, and if demand is low this
- * could be a while triggering the hung task watchdog.
- *
- * In order to avoid this, poke all tasks once the CPU is fully
- * up and running.
- */
-static void __cpuinit rcu_online_kthreads(int cpu)
-{
- struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
- struct rcu_node *rnp = rdp->mynode;
- struct task_struct *t;
-
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t)
- wake_up_process(t);
-
- t = rnp->node_kthread_task;
- if (t)
- wake_up_process(t);
-
- rcu_wake_one_boost_kthread(rnp);
-}
-
/*
* Handle CPU online/offline notification events.
*/
rcu_prepare_kthreads(cpu);
break;
case CPU_ONLINE:
- rcu_online_kthreads(cpu);
case CPU_DOWN_FAILED:
rcu_node_kthread_setaffinity(rnp, -1);
rcu_cpu_kthread_setrt(cpu, 1);
rcu_init_one(&rcu_sched_state, &rcu_sched_data);
rcu_init_one(&rcu_bh_state, &rcu_bh_data);
__rcu_init_preempt();
+ open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
/*
* We don't need protection against CPU-hotplug here because
/* period because */
/* force_quiescent_state() */
/* was running. */
+ u8 boost; /* Subject to priority boost. */
unsigned long gpnum; /* Current gp number. */
unsigned long completed; /* # of last completed gp. */
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
unsigned long flags);
+static void rcu_stop_cpu_kthread(int cpu);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_print_detail_task_stall(struct rcu_state *rsp);
static void rcu_print_task_stall(struct rcu_node *rnp);
static void __init __rcu_init_preempt(void);
static void rcu_needs_cpu_flush(void);
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
+static void invoke_rcu_callbacks_kthread(void);
+#ifdef CONFIG_RCU_BOOST
+static void rcu_preempt_do_callbacks(void);
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
cpumask_var_t cm);
-static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
struct rcu_node *rnp,
int rnp_index);
+static void invoke_rcu_node_kthread(struct rcu_node *rnp);
+static void rcu_yield(void (*f)(unsigned long), unsigned long arg);
+#endif /* #ifdef CONFIG_RCU_BOOST */
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt);
+static void __cpuinit rcu_prepare_kthreads(int cpu);
#endif /* #ifndef RCU_TREE_NONCORE */
&__get_cpu_var(rcu_preempt_data));
}
+#ifdef CONFIG_RCU_BOOST
+
+static void rcu_preempt_do_callbacks(void)
+{
+ rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data));
+}
+
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
/*
* Queue a preemptible-RCU callback for invocation after a grace period.
*/
}
}
+/*
+ * Wake up the per-CPU kthread to invoke RCU callbacks.
+ */
+static void invoke_rcu_callbacks_kthread(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __this_cpu_write(rcu_cpu_has_work, 1);
+ if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) {
+ local_irq_restore(flags);
+ return;
+ }
+ wake_up_process(__this_cpu_read(rcu_cpu_kthread_task));
+ local_irq_restore(flags);
+}
+
/*
* Set the affinity of the boost kthread. The CPU-hotplug locks are
* held, so no one should be messing with the existence of the boost
if (&rcu_preempt_state != rsp)
return 0;
+ rsp->boost = 1;
if (rnp->boost_kthread_task != NULL)
return 0;
t = kthread_create(rcu_boost_kthread, (void *)rnp,
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = RCU_KTHREAD_PRIO;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
}
-static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Stop the RCU's per-CPU kthread when its CPU goes offline,.
+ */
+static void rcu_stop_cpu_kthread(int cpu)
{
- if (rnp->boost_kthread_task)
- wake_up_process(rnp->boost_kthread_task);
+ struct task_struct *t;
+
+ /* Stop the CPU's kthread. */
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t != NULL) {
+ per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
+ kthread_stop(t);
+ }
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+static void rcu_kthread_do_work(void)
+{
+ rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data));
+ rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
+ rcu_preempt_do_callbacks();
+}
+
+/*
+ * Wake up the specified per-rcu_node-structure kthread.
+ * Because the per-rcu_node kthreads are immortal, we don't need
+ * to do anything to keep them alive.
+ */
+static void invoke_rcu_node_kthread(struct rcu_node *rnp)
+{
+ struct task_struct *t;
+
+ t = rnp->node_kthread_task;
+ if (t != NULL)
+ wake_up_process(t);
+}
+
+/*
+ * Set the specified CPU's kthread to run RT or not, as specified by
+ * the to_rt argument. The CPU-hotplug locks are held, so the task
+ * is not going away.
+ */
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
+{
+ int policy;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t == NULL)
+ return;
+ if (to_rt) {
+ policy = SCHED_FIFO;
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ } else {
+ policy = SCHED_NORMAL;
+ sp.sched_priority = 0;
+ }
+ sched_setscheduler_nocheck(t, policy, &sp);
+}
+
+/*
+ * Timer handler to initiate the waking up of per-CPU kthreads that
+ * have yielded the CPU due to excess numbers of RCU callbacks.
+ * We wake up the per-rcu_node kthread, which in turn will wake up
+ * the booster kthread.
+ */
+static void rcu_cpu_kthread_timer(unsigned long arg)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
+ struct rcu_node *rnp = rdp->mynode;
+
+ atomic_or(rdp->grpmask, &rnp->wakemask);
+ invoke_rcu_node_kthread(rnp);
+}
+
+/*
+ * Drop to non-real-time priority and yield, but only after posting a
+ * timer that will cause us to regain our real-time priority if we
+ * remain preempted. Either way, we restore our real-time priority
+ * before returning.
+ */
+static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
+{
+ struct sched_param sp;
+ struct timer_list yield_timer;
+
+ setup_timer_on_stack(&yield_timer, f, arg);
+ mod_timer(&yield_timer, jiffies + 2);
+ sp.sched_priority = 0;
+ sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp);
+ set_user_nice(current, 19);
+ schedule();
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
+ del_timer(&yield_timer);
+}
+
+/*
+ * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
+ * This can happen while the corresponding CPU is either coming online
+ * or going offline. We cannot wait until the CPU is fully online
+ * before starting the kthread, because the various notifier functions
+ * can wait for RCU grace periods. So we park rcu_cpu_kthread() until
+ * the corresponding CPU is online.
+ *
+ * Return 1 if the kthread needs to stop, 0 otherwise.
+ *
+ * Caller must disable bh. This function can momentarily enable it.
+ */
+static int rcu_cpu_kthread_should_stop(int cpu)
+{
+ while (cpu_is_offline(cpu) ||
+ !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) ||
+ smp_processor_id() != cpu) {
+ if (kthread_should_stop())
+ return 1;
+ per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
+ local_bh_enable();
+ schedule_timeout_uninterruptible(1);
+ if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)))
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
+ local_bh_disable();
+ }
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+ return 0;
+}
+
+/*
+ * Per-CPU kernel thread that invokes RCU callbacks. This replaces the
+ * earlier RCU softirq.
+ */
+static int rcu_cpu_kthread(void *arg)
+{
+ int cpu = (int)(long)arg;
+ unsigned long flags;
+ int spincnt = 0;
+ unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
+ char work;
+ char *workp = &per_cpu(rcu_cpu_has_work, cpu);
+
+ for (;;) {
+ *statusp = RCU_KTHREAD_WAITING;
+ rcu_wait(*workp != 0 || kthread_should_stop());
+ local_bh_disable();
+ if (rcu_cpu_kthread_should_stop(cpu)) {
+ local_bh_enable();
+ break;
+ }
+ *statusp = RCU_KTHREAD_RUNNING;
+ per_cpu(rcu_cpu_kthread_loops, cpu)++;
+ local_irq_save(flags);
+ work = *workp;
+ *workp = 0;
+ local_irq_restore(flags);
+ if (work)
+ rcu_kthread_do_work();
+ local_bh_enable();
+ if (*workp != 0)
+ spincnt++;
+ else
+ spincnt = 0;
+ if (spincnt > 10) {
+ *statusp = RCU_KTHREAD_YIELDING;
+ rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
+ spincnt = 0;
+ }
+ }
+ *statusp = RCU_KTHREAD_STOPPED;
+ return 0;
+}
+
+/*
+ * Spawn a per-CPU kthread, setting up affinity and priority.
+ * Because the CPU hotplug lock is held, no other CPU will be attempting
+ * to manipulate rcu_cpu_kthread_task. There might be another CPU
+ * attempting to access it during boot, but the locking in kthread_bind()
+ * will enforce sufficient ordering.
+ *
+ * Please note that we cannot simply refuse to wake up the per-CPU
+ * kthread because kthreads are created in TASK_UNINTERRUPTIBLE state,
+ * which can result in softlockup complaints if the task ends up being
+ * idle for more than a couple of minutes.
+ *
+ * However, please note also that we cannot bind the per-CPU kthread to its
+ * CPU until that CPU is fully online. We also cannot wait until the
+ * CPU is fully online before we create its per-CPU kthread, as this would
+ * deadlock the system when CPU notifiers tried waiting for grace
+ * periods. So we bind the per-CPU kthread to its CPU only if the CPU
+ * is online. If its CPU is not yet fully online, then the code in
+ * rcu_cpu_kthread() will wait until it is fully online, and then do
+ * the binding.
+ */
+static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
+{
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (!rcu_kthreads_spawnable ||
+ per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
+ return 0;
+ t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ if (cpu_online(cpu))
+ kthread_bind(t, cpu);
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+ WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ per_cpu(rcu_cpu_kthread_task, cpu) = t;
+ wake_up_process(t); /* Get to TASK_INTERRUPTIBLE quickly. */
+ return 0;
+}
+
+/*
+ * Per-rcu_node kthread, which is in charge of waking up the per-CPU
+ * kthreads when needed. We ignore requests to wake up kthreads
+ * for offline CPUs, which is OK because force_quiescent_state()
+ * takes care of this case.
+ */
+static int rcu_node_kthread(void *arg)
+{
+ int cpu;
+ unsigned long flags;
+ unsigned long mask;
+ struct rcu_node *rnp = (struct rcu_node *)arg;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ for (;;) {
+ rnp->node_kthread_status = RCU_KTHREAD_WAITING;
+ rcu_wait(atomic_read(&rnp->wakemask) != 0);
+ rnp->node_kthread_status = RCU_KTHREAD_RUNNING;
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ mask = atomic_xchg(&rnp->wakemask, 0);
+ rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) {
+ if ((mask & 0x1) == 0)
+ continue;
+ preempt_disable();
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (!cpu_online(cpu) || t == NULL) {
+ preempt_enable();
+ continue;
+ }
+ per_cpu(rcu_cpu_has_work, cpu) = 1;
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ preempt_enable();
+ }
+ }
+ /* NOTREACHED */
+ rnp->node_kthread_status = RCU_KTHREAD_STOPPED;
+ return 0;
+}
+
+/*
+ * Set the per-rcu_node kthread's affinity to cover all CPUs that are
+ * served by the rcu_node in question. The CPU hotplug lock is still
+ * held, so the value of rnp->qsmaskinit will be stable.
+ *
+ * We don't include outgoingcpu in the affinity set, use -1 if there is
+ * no outgoing CPU. If there are no CPUs left in the affinity set,
+ * this function allows the kthread to execute on any CPU.
+ */
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
+{
+ cpumask_var_t cm;
+ int cpu;
+ unsigned long mask = rnp->qsmaskinit;
+
+ if (rnp->node_kthread_task == NULL)
+ return;
+ if (!alloc_cpumask_var(&cm, GFP_KERNEL))
+ return;
+ cpumask_clear(cm);
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
+ if ((mask & 0x1) && cpu != outgoingcpu)
+ cpumask_set_cpu(cpu, cm);
+ if (cpumask_weight(cm) == 0) {
+ cpumask_setall(cm);
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
+ cpumask_clear_cpu(cpu, cm);
+ WARN_ON_ONCE(cpumask_weight(cm) == 0);
+ }
+ set_cpus_allowed_ptr(rnp->node_kthread_task, cm);
+ rcu_boost_kthread_setaffinity(rnp, cm);
+ free_cpumask_var(cm);
+}
+
+/*
+ * Spawn a per-rcu_node kthread, setting priority and affinity.
+ * Called during boot before online/offline can happen, or, if
+ * during runtime, with the main CPU-hotplug locks held. So only
+ * one of these can be executing at a time.
+ */
+static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+ unsigned long flags;
+ int rnp_index = rnp - &rsp->node[0];
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (!rcu_kthreads_spawnable ||
+ rnp->qsmaskinit == 0)
+ return 0;
+ if (rnp->node_kthread_task == NULL) {
+ t = kthread_create(rcu_node_kthread, (void *)rnp,
+ "rcun%d", rnp_index);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ rnp->node_kthread_task = t;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ sp.sched_priority = 99;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
+ }
+ return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
+}
+
+/*
+ * Spawn all kthreads -- called as soon as the scheduler is running.
+ */
+static int __init rcu_spawn_kthreads(void)
+{
+ int cpu;
+ struct rcu_node *rnp;
+
+ rcu_kthreads_spawnable = 1;
+ for_each_possible_cpu(cpu) {
+ per_cpu(rcu_cpu_has_work, cpu) = 0;
+ if (cpu_online(cpu))
+ (void)rcu_spawn_one_cpu_kthread(cpu);
+ }
+ rnp = rcu_get_root(rcu_state);
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ if (NUM_RCU_NODES > 1) {
+ rcu_for_each_leaf_node(rcu_state, rnp)
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ }
+ return 0;
+}
+early_initcall(rcu_spawn_kthreads);
+
+static void __cpuinit rcu_prepare_kthreads(int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+ struct rcu_node *rnp = rdp->mynode;
+
+ /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
+ if (rcu_kthreads_spawnable) {
+ (void)rcu_spawn_one_cpu_kthread(cpu);
+ if (rnp->node_kthread_task == NULL)
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ }
}
#else /* #ifdef CONFIG_RCU_BOOST */
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
-static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
- cpumask_var_t cm)
+static void invoke_rcu_callbacks_kthread(void)
{
+ WARN_ON_ONCE(1);
}
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
}
-static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
- struct rcu_node *rnp,
- int rnp_index)
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void rcu_stop_cpu_kthread(int cpu)
+{
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
+{
+}
+
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
{
- return 0;
}
-static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+static void __cpuinit rcu_prepare_kthreads(int cpu)
{
}
*
* Because it is not legal to invoke rcu_process_callbacks() with irqs
* disabled, we do one pass of force_quiescent_state(), then do a
- * invoke_rcu_cpu_kthread() to cause rcu_process_callbacks() to be invoked
+ * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
* later. The per-cpu rcu_dyntick_drain variable controls the sequencing.
*/
int rcu_needs_cpu(int cpu)
/* If RCU callbacks are still pending, RCU still needs this CPU. */
if (c)
- invoke_rcu_cpu_kthread();
+ invoke_rcu_core();
return c;
}
#define RCU_TREE_NONCORE
#include "rcutree.h"
+#ifdef CONFIG_RCU_BOOST
+
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_cpu);
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
return "SRWOY"[kthread_status];
}
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
{
if (!rdp->beenonline)
rdp->dynticks_fqs);
#endif /* #ifdef CONFIG_NO_HZ */
seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi);
- seq_printf(m, " ql=%ld qs=%c%c%c%c kt=%d/%c/%d ktl=%x b=%ld",
+ seq_printf(m, " ql=%ld qs=%c%c%c%c",
rdp->qlen,
".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
rdp->nxttail[RCU_NEXT_TAIL]],
rdp->nxttail[RCU_NEXT_READY_TAIL]],
".W"[rdp->nxttail[RCU_DONE_TAIL] !=
rdp->nxttail[RCU_WAIT_TAIL]],
- ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+ ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]);
+#ifdef CONFIG_RCU_BOOST
+ seq_printf(m, " kt=%d/%c/%d ktl=%x",
per_cpu(rcu_cpu_has_work, rdp->cpu),
convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
rdp->cpu)),
per_cpu(rcu_cpu_kthread_cpu, rdp->cpu),
- per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff,
- rdp->blimit);
+ per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff);
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ seq_printf(m, " b=%ld", rdp->blimit);
seq_printf(m, " ci=%lu co=%lu ca=%lu\n",
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
rdp->dynticks_fqs);
#endif /* #ifdef CONFIG_NO_HZ */
seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi);
- seq_printf(m, ",%ld,\"%c%c%c%c\",%d,\"%c\",%ld", rdp->qlen,
+ seq_printf(m, ",%ld,\"%c%c%c%c\"", rdp->qlen,
".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
rdp->nxttail[RCU_NEXT_TAIL]],
".R"[rdp->nxttail[RCU_WAIT_TAIL] !=
rdp->nxttail[RCU_NEXT_READY_TAIL]],
".W"[rdp->nxttail[RCU_DONE_TAIL] !=
rdp->nxttail[RCU_WAIT_TAIL]],
- ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+ ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]);
+#ifdef CONFIG_RCU_BOOST
+ seq_printf(m, ",%d,\"%c\"",
per_cpu(rcu_cpu_has_work, rdp->cpu),
convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
- rdp->cpu)),
- rdp->blimit);
+ rdp->cpu)));
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ seq_printf(m, ",%ld", rdp->blimit);
seq_printf(m, ",%lu,%lu,%lu\n",
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
#ifdef CONFIG_NO_HZ
seq_puts(m, "\"dt\",\"dt nesting\",\"dt NMI nesting\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
- seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\",\"ci\",\"co\",\"ca\"\n");
+ seq_puts(m, "\"of\",\"ri\",\"ql\",\"qs\"");
+#ifdef CONFIG_RCU_BOOST
+ seq_puts(m, "\"kt\",\"ktl\"");
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ seq_puts(m, ",\"b\",\"ci\",\"co\",\"ca\"\n");
#ifdef CONFIG_TREE_PREEMPT_RCU
seq_puts(m, "\"rcu_preempt:\"\n");
PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data_csv, m);
/*
* Return the group to which this tasks belongs.
*
- * We use task_subsys_state_check() and extend the RCU verification
- * with lockdep_is_held(&p->pi_lock) because cpu_cgroup_attach()
- * holds that lock for each task it moves into the cgroup. Therefore
- * by holding that lock, we pin the task to the current cgroup.
+ * We use task_subsys_state_check() and extend the RCU verification with
+ * pi->lock and rq->lock because cpu_cgroup_attach() holds those locks for each
+ * task it moves into the cgroup. Therefore by holding either of those locks,
+ * we pin the task to the current cgroup.
*/
static inline struct task_group *task_group(struct task_struct *p)
{
struct cgroup_subsys_state *css;
css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
- lockdep_is_held(&p->pi_lock));
+ lockdep_is_held(&p->pi_lock) ||
+ lockdep_is_held(&task_rq(p)->lock));
tg = container_of(css, struct task_group, css);
return autogroup_task_group(p, tg);
!(task_thread_info(p)->preempt_count & PREEMPT_ACTIVE));
#ifdef CONFIG_LOCKDEP
+ /*
+ * The caller should hold either p->pi_lock or rq->lock, when changing
+ * a task's CPU. ->pi_lock for waking tasks, rq->lock for runnable tasks.
+ *
+ * sched_move_task() holds both and thus holding either pins the cgroup,
+ * see set_task_rq().
+ *
+ * Furthermore, all task_rq users should acquire both locks, see
+ * task_rq_lock().
+ */
WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) ||
lockdep_is_held(&task_rq(p)->lock)));
#endif
}
rcu_read_unlock();
}
+
+ if (wake_flags & WF_MIGRATED)
+ schedstat_inc(p, se.statistics.nr_wakeups_migrate);
+
#endif /* CONFIG_SMP */
schedstat_inc(rq, ttwu_count);
if (wake_flags & WF_SYNC)
schedstat_inc(p, se.statistics.nr_wakeups_sync);
- if (cpu != task_cpu(p))
- schedstat_inc(p, se.statistics.nr_wakeups_migrate);
-
#endif /* CONFIG_SCHEDSTATS */
}
#if defined(CONFIG_SMP)
if (sched_feat(TTWU_QUEUE) && cpu != smp_processor_id()) {
+ sched_clock_cpu(cpu); /* sync clocks x-cpu */
ttwu_queue_remote(p, cpu);
return;
}
p->sched_class->task_waking(p);
cpu = select_task_rq(p, SD_BALANCE_WAKE, wake_flags);
- if (task_cpu(p) != cpu)
+ if (task_cpu(p) != cpu) {
+ wake_flags |= WF_MIGRATED;
set_task_cpu(p, cpu);
+ }
#endif /* CONFIG_SMP */
ttwu_queue(p, cpu);
* to move current somewhere else, making room for our non-migratable
* task.
*/
- if (p->prio == rq->curr->prio && !need_resched())
+ if (p->prio == rq->curr->prio && !test_tsk_need_resched(rq->curr))
check_preempt_equal_prio(rq, p);
#endif
}
int this_cpu = smp_processor_id();
int cpu = task_cpu(task);
+ /* Make sure the mask is initialized first */
+ if (unlikely(!lowest_mask))
+ return -1;
+
if (task->rt.nr_cpus_allowed == 1)
return -1; /* No other targets possible */
/**
* sys_rt_sigprocmask - change the list of currently blocked signals
* @how: whether to add, remove, or set signals
- * @set: stores pending signals
+ * @nset: stores pending signals
* @oset: previous value of signal mask if non-null
* @sigsetsize: size of sigset_t type
*/
.notifier_call = hotplug_cfd,
};
-static int __cpuinit init_call_single_data(void)
+void __init call_function_init(void)
{
void *cpu = (void *)(long)smp_processor_id();
int i;
hotplug_cfd(&hotplug_cfd_notifier, CPU_UP_PREPARE, cpu);
register_cpu_notifier(&hotplug_cfd_notifier);
-
- return 0;
}
-early_initcall(init_call_single_data);
/*
* csd_lock/csd_unlock used to serialize access to per-cpu csd resources
char *softirq_to_name[NR_SOFTIRQS] = {
"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL",
- "TASKLET", "SCHED", "HRTIMER"
+ "TASKLET", "SCHED", "HRTIMER", "RCU"
};
/*
},
#endif
#ifdef CONFIG_PERF_EVENTS
+ /*
+ * User-space scripts rely on the existence of this file
+ * as a feature check for perf_events being enabled.
+ *
+ * So it's an ABI, do not remove!
+ */
{
.procname = "perf_event_paranoid",
.data = &sysctl_perf_event_paranoid,
unsigned long flags;
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
- BUG_ON(!dev->cpumask);
+ if (!dev->cpumask) {
+ WARN_ON(num_possible_cpus() > 1);
+ dev->cpumask = cpumask_of(smp_processor_id());
+ }
raw_spin_lock_irqsave(&clockevents_lock, flags);
static struct timer_list watchdog_timer;
static DECLARE_WORK(watchdog_work, clocksource_watchdog_work);
static DEFINE_SPINLOCK(watchdog_lock);
-static cycle_t watchdog_last;
static int watchdog_running;
static int clocksource_watchdog_kthread(void *data);
if (!watchdog_running)
goto out;
- wdnow = watchdog->read(watchdog);
- wd_nsec = clocksource_cyc2ns((wdnow - watchdog_last) & watchdog->mask,
- watchdog->mult, watchdog->shift);
- watchdog_last = wdnow;
-
list_for_each_entry(cs, &watchdog_list, wd_list) {
/* Clocksource already marked unstable? */
continue;
}
+ local_irq_disable();
csnow = cs->read(cs);
+ wdnow = watchdog->read(watchdog);
+ local_irq_enable();
/* Clocksource initialized ? */
if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
cs->flags |= CLOCK_SOURCE_WATCHDOG;
- cs->wd_last = csnow;
+ cs->wd_last = wdnow;
+ cs->cs_last = csnow;
continue;
}
- /* Check the deviation from the watchdog clocksource. */
- cs_nsec = clocksource_cyc2ns((csnow - cs->wd_last) &
+ wd_nsec = clocksource_cyc2ns((wdnow - cs->wd_last) & watchdog->mask,
+ watchdog->mult, watchdog->shift);
+
+ cs_nsec = clocksource_cyc2ns((csnow - cs->cs_last) &
cs->mask, cs->mult, cs->shift);
- cs->wd_last = csnow;
+ cs->cs_last = csnow;
+ cs->wd_last = wdnow;
+
+ /* Check the deviation from the watchdog clocksource. */
if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
clocksource_unstable(cs, cs_nsec - wd_nsec);
continue;
return;
init_timer(&watchdog_timer);
watchdog_timer.function = clocksource_watchdog;
- watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask));
watchdog_running = 1;
unsigned long expires_limit, mask;
int bit;
- expires_limit = expires;
-
if (timer->slack >= 0) {
expires_limit = expires + timer->slack;
} else {
- unsigned long now = jiffies;
+ long delta = expires - jiffies;
+
+ if (delta < 256)
+ return expires;
- /* No slack, if already expired else auto slack 0.4% */
- if (time_after(expires, now))
- expires_limit = expires + (expires - now)/256;
+ expires_limit = expires + delta / 256;
}
mask = expires ^ expires_limit;
if (mask == 0)
*/
int mod_timer(struct timer_list *timer, unsigned long expires)
{
+ expires = apply_slack(timer, expires);
+
/*
* This is a common optimization triggered by the
* networking code - if the timer is re-modified
if (timer_pending(timer) && timer->expires == expires)
return 1;
- expires = apply_slack(timer, expires);
-
return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
}
EXPORT_SYMBOL(mod_timer);
{
char *func, *command, *next = buff;
struct ftrace_func_command *p;
- int ret;
+ int ret = -EINVAL;
func = strsep(&next, ":");
{
unsigned long *p;
unsigned long addr;
+ unsigned long flags;
mutex_lock(&ftrace_lock);
p = start;
ftrace_record_ip(addr);
}
+ /*
+ * Disable interrupts to prevent interrupts from executing
+ * code that is being modified.
+ */
+ local_irq_save(flags);
ftrace_update_code(mod);
+ local_irq_restore(flags);
mutex_unlock(&ftrace_lock);
return 0;
#ifdef CONFIG_FTRACE_STARTUP_TEST
-static int kprobe_trace_selftest_target(int a1, int a2, int a3,
- int a4, int a5, int a6)
+/*
+ * The "__used" keeps gcc from removing the function symbol
+ * from the kallsyms table.
+ */
+static __used int kprobe_trace_selftest_target(int a1, int a2, int a3,
+ int a4, int a5, int a6)
{
return a1 + a2 + a3 + a4 + a5 + a6;
}
const char **fmt = v;
int start_index;
- if (!fmt)
- fmt = __start___trace_bprintk_fmt + *pos;
-
start_index = __stop___trace_bprintk_fmt - __start___trace_bprintk_fmt;
if (*pos < start_index)
- return fmt;
+ return __start___trace_bprintk_fmt + *pos;
return find_next_mod_format(start_index, v, fmt, pos);
}
/**
* __bitmap_parselist - convert list format ASCII string to bitmap
- * @bp: read nul-terminated user string from this buffer
+ * @buf: read nul-terminated user string from this buffer
* @buflen: buffer size in bytes. If string is smaller than this
* then it must be terminated with a \0.
* @is_user: location of buffer, 0 indicates kernel space
}
-const void *kobj_ns_current(enum kobj_ns_type type)
+void *kobj_ns_grab_current(enum kobj_ns_type type)
{
- const void *ns = NULL;
+ void *ns = NULL;
spin_lock(&kobj_ns_type_lock);
if ((type > KOBJ_NS_TYPE_NONE) && (type < KOBJ_NS_TYPES) &&
kobj_ns_ops_tbl[type])
- ns = kobj_ns_ops_tbl[type]->current_ns();
+ ns = kobj_ns_ops_tbl[type]->grab_current_ns();
spin_unlock(&kobj_ns_type_lock);
return ns;
return ns;
}
-/*
- * kobj_ns_exit - invalidate a namespace tag
- *
- * @type: the namespace type (i.e. KOBJ_NS_TYPE_NET)
- * @ns: the actual namespace being invalidated
- *
- * This is called when a tag is no longer valid. For instance,
- * when a network namespace exits, it uses this helper to
- * make sure no sb's sysfs_info points to the now-invalidated
- * netns.
- */
-void kobj_ns_exit(enum kobj_ns_type type, const void *ns)
+void kobj_ns_drop(enum kobj_ns_type type, void *ns)
{
- sysfs_exit_ns(type, ns);
+ spin_lock(&kobj_ns_type_lock);
+ if ((type > KOBJ_NS_TYPE_NONE) && (type < KOBJ_NS_TYPES) &&
+ kobj_ns_ops_tbl[type] && kobj_ns_ops_tbl[type]->drop_ns)
+ kobj_ns_ops_tbl[type]->drop_ns(ns);
+ spin_unlock(&kobj_ns_type_lock);
}
-
EXPORT_SYMBOL(kobject_get);
EXPORT_SYMBOL(kobject_put);
EXPORT_SYMBOL(kobject_del);
__setup("swiotlb=", setup_io_tlb_npages);
/* make io_tlb_overflow tunable too? */
+unsigned long swioltb_nr_tbl(void)
+{
+ return io_tlb_nslabs;
+}
+
/* Note that this doesn't work with highmem page */
static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
volatile void *address)
colonpos = i;
}
}
+ if (longest == 1) /* don't compress a single 0 */
+ colonpos = -1;
/* emit address */
for (i = 0; i < range; i++) {
* IPv4 uses dot-separated decimal with leading 0's (010.123.045.006)
* - '[Ii]4[hnbl]' IPv4 addresses in host, network, big or little endian order
* - 'I6c' for IPv6 addresses printed as specified by
- * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00
+ * http://tools.ietf.org/html/rfc5952
* - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form
* "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
* Options for %pU are:
int nr_freepages = cc->nr_freepages;
struct list_head *freelist = &cc->freepages;
+ /*
+ * Initialise the free scanner. The starting point is where we last
+ * scanned from (or the end of the zone if starting). The low point
+ * is the end of the pageblock the migration scanner is using.
+ */
pfn = cc->free_pfn;
low_pfn = cc->migrate_pfn + pageblock_nr_pages;
- high_pfn = low_pfn;
+
+ /*
+ * Take care that if the migration scanner is at the end of the zone
+ * that the free scanner does not accidentally move to the next zone
+ * in the next isolation cycle.
+ */
+ high_pfn = min(low_pfn, pfn);
/*
* Isolate free pages until enough are available to migrate the
return isolated > (inactive + active) / 2;
}
+/* possible outcome of isolate_migratepages */
+typedef enum {
+ ISOLATE_ABORT, /* Abort compaction now */
+ ISOLATE_NONE, /* No pages isolated, continue scanning */
+ ISOLATE_SUCCESS, /* Pages isolated, migrate */
+} isolate_migrate_t;
+
/*
* Isolate all pages that can be migrated from the block pointed to by
* the migrate scanner within compact_control.
*/
-static unsigned long isolate_migratepages(struct zone *zone,
+static isolate_migrate_t isolate_migratepages(struct zone *zone,
struct compact_control *cc)
{
unsigned long low_pfn, end_pfn;
/* Do not cross the free scanner or scan within a memory hole */
if (end_pfn > cc->free_pfn || !pfn_valid(low_pfn)) {
cc->migrate_pfn = end_pfn;
- return 0;
+ return ISOLATE_NONE;
}
/*
* delay for some time until fewer pages are isolated
*/
while (unlikely(too_many_isolated(zone))) {
+ /* async migration should just abort */
+ if (!cc->sync)
+ return ISOLATE_ABORT;
+
congestion_wait(BLK_RW_ASYNC, HZ/10);
if (fatal_signal_pending(current))
- return 0;
+ return ISOLATE_ABORT;
}
/* Time to isolate some pages for migration */
trace_mm_compaction_isolate_migratepages(nr_scanned, nr_isolated);
- return cc->nr_migratepages;
+ return ISOLATE_SUCCESS;
}
/*
if (cc->free_pfn <= cc->migrate_pfn)
return COMPACT_COMPLETE;
- /* Compaction run is not finished if the watermark is not met */
- watermark = low_wmark_pages(zone);
- watermark += (1 << cc->order);
-
- if (!zone_watermark_ok(zone, cc->order, watermark, 0, 0))
- return COMPACT_CONTINUE;
-
/*
* order == -1 is expected when compacting via
* /proc/sys/vm/compact_memory
if (cc->order == -1)
return COMPACT_CONTINUE;
+ /* Compaction run is not finished if the watermark is not met */
+ watermark = low_wmark_pages(zone);
+ watermark += (1 << cc->order);
+
+ if (!zone_watermark_ok(zone, cc->order, watermark, 0, 0))
+ return COMPACT_CONTINUE;
+
/* Direct compactor: Is a suitable page free? */
for (order = cc->order; order < MAX_ORDER; order++) {
/* Job done if page is free of the right migratetype */
int fragindex;
unsigned long watermark;
+ /*
+ * order == -1 is expected when compacting via
+ * /proc/sys/vm/compact_memory
+ */
+ if (order == -1)
+ return COMPACT_CONTINUE;
+
/*
* Watermarks for order-0 must be met for compaction. Note the 2UL.
* This is because during migration, copies of pages need to be
if (!zone_watermark_ok(zone, 0, watermark, 0, 0))
return COMPACT_SKIPPED;
- /*
- * order == -1 is expected when compacting via
- * /proc/sys/vm/compact_memory
- */
- if (order == -1)
- return COMPACT_CONTINUE;
-
/*
* fragmentation index determines if allocation failures are due to
* low memory or external fragmentation
*
- * index of -1 implies allocations might succeed dependingon watermarks
+ * index of -1000 implies allocations might succeed depending on
+ * watermarks
* index towards 0 implies failure is due to lack of memory
* index towards 1000 implies failure is due to fragmentation
*
if (fragindex >= 0 && fragindex <= sysctl_extfrag_threshold)
return COMPACT_SKIPPED;
- if (fragindex == -1 && zone_watermark_ok(zone, order, watermark, 0, 0))
+ if (fragindex == -1000 && zone_watermark_ok(zone, order, watermark,
+ 0, 0))
return COMPACT_PARTIAL;
return COMPACT_CONTINUE;
unsigned long nr_migrate, nr_remaining;
int err;
- if (!isolate_migratepages(zone, cc))
+ switch (isolate_migratepages(zone, cc)) {
+ case ISOLATE_ABORT:
+ ret = COMPACT_PARTIAL;
+ goto out;
+ case ISOLATE_NONE:
continue;
+ case ISOLATE_SUCCESS:
+ ;
+ }
nr_migrate = cc->nr_migratepages;
err = migrate_pages(&cc->migratepages, compaction_alloc,
}
+out:
/* Release free pages and check accounting */
cc->nr_freepages -= release_freepages(&cc->freepages);
VM_BUG_ON(cc->nr_freepages != 0);
error = security_inode_killpriv(dentry);
if (!error && killsuid)
error = __remove_suid(dentry, killsuid);
- if (!error)
+ if (!error && (inode->i_sb->s_flags & MS_NOSEC))
inode->i_flags |= S_NOSEC;
return error;
while (likely(khugepaged_enabled())) {
#ifndef CONFIG_NUMA
hpage = khugepaged_alloc_hugepage();
- if (unlikely(!hpage)) {
- count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
+ if (unlikely(!hpage))
break;
- }
- count_vm_event(THP_COLLAPSE_ALLOC);
#else
if (IS_ERR(hpage)) {
khugepaged_alloc_sleep();
WARN_ON(page_count(page) != 1);
prep_compound_huge_page(page, h->order);
prep_new_huge_page(h, page, page_to_nid(page));
+ /*
+ * If we had gigantic hugepages allocated at boot time, we need
+ * to restore the 'stolen' pages to totalram_pages in order to
+ * fix confusing memory reports from free(1) and another
+ * side-effects, like CommitLimit going negative.
+ */
+ if (h->order > (MAX_ORDER - 1))
+ totalram_pages += 1 << h->order;
}
}
slot = list_entry(slot->mm_list.next, struct mm_slot, mm_list);
ksm_scan.mm_slot = slot;
spin_unlock(&ksm_mmlist_lock);
+ /*
+ * Although we tested list_empty() above, a racing __ksm_exit
+ * of the last mm on the list may have removed it since then.
+ */
+ if (slot == &ksm_mm_head)
+ return NULL;
next_mm:
ksm_scan.address = 0;
ksm_scan.rmap_list = &slot->rmap_list;
static void mem_cgroup_get(struct mem_cgroup *mem);
static void mem_cgroup_put(struct mem_cgroup *mem);
static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
-static void drain_all_stock_async(void);
+static void drain_all_stock_async(struct mem_cgroup *mem);
static struct mem_cgroup_per_zone *
mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
struct mem_cgroup, css);
}
-static struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
{
struct mem_cgroup *mem = NULL;
excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
/* If memsw_is_minimum==1, swap-out is of-no-use. */
- if (root_mem->memsw_is_minimum)
+ if (!check_soft && root_mem->memsw_is_minimum)
noswap = true;
while (1) {
victim = mem_cgroup_select_victim(root_mem);
if (victim == root_mem) {
loop++;
- if (loop >= 1)
- drain_all_stock_async();
+ /*
+ * We are not draining per cpu cached charges during
+ * soft limit reclaim because global reclaim doesn't
+ * care about charges. It tries to free some memory and
+ * charges will not give any.
+ */
+ if (!check_soft && loop >= 1)
+ drain_all_stock_async(root_mem);
if (loop >= 2) {
/*
* If we have not been able to reclaim
struct mem_cgroup *cached; /* this never be root cgroup */
unsigned int nr_pages;
struct work_struct work;
+ unsigned long flags;
+#define FLUSHING_CACHED_CHARGE (0)
};
static DEFINE_PER_CPU(struct memcg_stock_pcp, memcg_stock);
-static atomic_t memcg_drain_count;
+static DEFINE_MUTEX(percpu_charge_mutex);
/*
* Try to consume stocked charge on this cpu. If success, one page is consumed
{
struct memcg_stock_pcp *stock = &__get_cpu_var(memcg_stock);
drain_stock(stock);
+ clear_bit(FLUSHING_CACHED_CHARGE, &stock->flags);
}
/*
* expects some charges will be back to res_counter later but cannot wait for
* it.
*/
-static void drain_all_stock_async(void)
+static void drain_all_stock_async(struct mem_cgroup *root_mem)
{
- int cpu;
- /* This function is for scheduling "drain" in asynchronous way.
- * The result of "drain" is not directly handled by callers. Then,
- * if someone is calling drain, we don't have to call drain more.
- * Anyway, WORK_STRUCT_PENDING check in queue_work_on() will catch if
- * there is a race. We just do loose check here.
+ int cpu, curcpu;
+ /*
+ * If someone calls draining, avoid adding more kworker runs.
*/
- if (atomic_read(&memcg_drain_count))
+ if (!mutex_trylock(&percpu_charge_mutex))
return;
/* Notify other cpus that system-wide "drain" is running */
- atomic_inc(&memcg_drain_count);
get_online_cpus();
+ /*
+ * Get a hint for avoiding draining charges on the current cpu,
+ * which must be exhausted by our charging. It is not required that
+ * this be a precise check, so we use raw_smp_processor_id() instead of
+ * getcpu()/putcpu().
+ */
+ curcpu = raw_smp_processor_id();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
- schedule_work_on(cpu, &stock->work);
+ struct mem_cgroup *mem;
+
+ if (cpu == curcpu)
+ continue;
+
+ mem = stock->cached;
+ if (!mem)
+ continue;
+ if (mem != root_mem) {
+ if (!root_mem->use_hierarchy)
+ continue;
+ /* check whether "mem" is under tree of "root_mem" */
+ if (!css_is_ancestor(&mem->css, &root_mem->css))
+ continue;
+ }
+ if (!test_and_set_bit(FLUSHING_CACHED_CHARGE, &stock->flags))
+ schedule_work_on(cpu, &stock->work);
}
put_online_cpus();
- atomic_dec(&memcg_drain_count);
+ mutex_unlock(&percpu_charge_mutex);
/* We don't wait for flush_work */
}
static void drain_all_stock_sync(void)
{
/* called when force_empty is called */
- atomic_inc(&memcg_drain_count);
+ mutex_lock(&percpu_charge_mutex);
schedule_on_each_cpu(drain_local_stock);
- atomic_dec(&memcg_drain_count);
+ mutex_unlock(&percpu_charge_mutex);
}
/*
{
.name = "numa_stat",
.open = mem_control_numa_stat_open,
+ .mode = S_IRUGO,
},
#endif
};
struct cgroup *old_cont,
struct task_struct *p)
{
- struct mm_struct *mm;
+ struct mm_struct *mm = get_task_mm(p);
- if (!mc.to)
- /* no need to move charge */
- return;
-
- mm = get_task_mm(p);
if (mm) {
- mem_cgroup_move_charge(mm);
+ if (mc.to)
+ mem_cgroup_move_charge(mm);
+ put_swap_token(mm);
mmput(mm);
}
- mem_cgroup_clear_mc();
+ if (mc.to)
+ mem_cgroup_clear_mc();
}
#else /* !CONFIG_MMU */
static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
#include <linux/swapops.h>
#include <linux/hugetlb.h>
#include <linux/memory_hotplug.h>
+#include <linux/mm_inline.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
put_page(page);
if (!ret) {
LIST_HEAD(pagelist);
-
+ inc_zone_page_state(page, NR_ISOLATED_ANON +
+ page_is_file_cache(page));
list_add(&page->lru, &pagelist);
ret = migrate_pages(&pagelist, new_page, MPOL_MF_MOVE_ALL,
0, true);
int force_flush = 0;
int rss[NR_MM_COUNTERS];
spinlock_t *ptl;
+ pte_t *start_pte;
pte_t *pte;
again:
init_rss_vec(rss);
- pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ start_pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ pte = start_pte;
arch_enter_lazy_mmu_mode();
do {
pte_t ptent = *pte;
add_mm_rss_vec(mm, rss);
arch_leave_lazy_mmu_mode();
- pte_unmap_unlock(pte - 1, ptl);
+ pte_unmap_unlock(start_pte, ptl);
/*
* mmu_gather ran out of room to batch pages, we break out of
/**
* unmap_vmas - unmap a range of memory covered by a list of vma's
- * @tlbp: address of the caller's struct mmu_gather
+ * @tlb: address of the caller's struct mmu_gather
* @vma: the starting vma
* @start_addr: virtual address at which to start unmapping
* @end_addr: virtual address at which to end unmapping
/* init node's zones as empty zones, we don't have any present pages.*/
free_area_init_node(nid, zones_size, start_pfn, zholes_size);
+ /*
+ * The node we allocated has no zone fallback lists. For avoiding
+ * to access not-initialized zonelist, build here.
+ */
+ build_all_zonelists(NULL);
+
return pgdat;
}
*/
__dec_zone_page_state(page, NR_FILE_PAGES);
__inc_zone_page_state(newpage, NR_FILE_PAGES);
- if (PageSwapBacked(page)) {
+ if (!PageSwapCache(page) && PageSwapBacked(page)) {
__dec_zone_page_state(page, NR_SHMEM);
__inc_zone_page_state(newpage, NR_SHMEM);
}
if (anon_vma)
return anon_vma;
try_prev:
- /*
- * It is potentially slow to have to call find_vma_prev here.
- * But it's only on the first write fault on the vma, not
- * every time, and we could devise a way to avoid it later
- * (e.g. stash info in next's anon_vma_node when assigning
- * an anon_vma, or when trying vma_merge). Another time.
- */
- BUG_ON(find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma);
+ near = vma->vm_prev;
if (!near)
goto none;
return -EINVAL;
/* Find the first overlapping VMA */
- vma = find_vma_prev(mm, start, &prev);
+ vma = find_vma(mm, start);
if (!vma)
return 0;
+ prev = vma->vm_prev;
/* we have start < vma->vm_end */
/* if it doesn't overlap, we have nothing.. */
}
#endif
-static int __meminit init_section_page_cgroup(unsigned long pfn)
+static int __meminit init_section_page_cgroup(unsigned long pfn, int nid)
{
struct page_cgroup *base, *pc;
struct mem_section *section;
unsigned long table_size;
unsigned long nr;
- int nid, index;
+ int index;
nr = pfn_to_section_nr(pfn);
section = __nr_to_section(nr);
if (section->page_cgroup)
return 0;
- nid = page_to_nid(pfn_to_page(pfn));
table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
base = alloc_page_cgroup(table_size, nid);
pc = base + index;
init_page_cgroup(pc, nr);
}
-
+ /*
+ * The passed "pfn" may not be aligned to SECTION. For the calculation
+ * we need to apply a mask.
+ */
+ pfn &= PAGE_SECTION_MASK;
section->page_cgroup = base - pfn;
total_usage += table_size;
return 0;
start = start_pfn & ~(PAGES_PER_SECTION - 1);
end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION);
+ if (nid == -1) {
+ /*
+ * In this case, "nid" already exists and contains valid memory.
+ * "start_pfn" passed to us is a pfn which is an arg for
+ * online__pages(), and start_pfn should exist.
+ */
+ nid = pfn_to_nid(start_pfn);
+ VM_BUG_ON(!node_state(nid, N_ONLINE));
+ }
+
for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) {
if (!pfn_present(pfn))
continue;
- fail = init_section_page_cgroup(pfn);
+ fail = init_section_page_cgroup(pfn, nid);
}
if (!fail)
return 0;
void __init page_cgroup_init(void)
{
unsigned long pfn;
- int fail = 0;
+ int nid;
if (mem_cgroup_disabled())
return;
- for (pfn = 0; !fail && pfn < max_pfn; pfn += PAGES_PER_SECTION) {
- if (!pfn_present(pfn))
- continue;
- fail = init_section_page_cgroup(pfn);
- }
- if (fail) {
- printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
- panic("Out of memory");
- } else {
- hotplug_memory_notifier(page_cgroup_callback, 0);
+ for_each_node_state(nid, N_HIGH_MEMORY) {
+ unsigned long start_pfn, end_pfn;
+
+ start_pfn = node_start_pfn(nid);
+ end_pfn = node_end_pfn(nid);
+ /*
+ * start_pfn and end_pfn may not be aligned to SECTION and the
+ * page->flags of out of node pages are not initialized. So we
+ * scan [start_pfn, the biggest section's pfn < end_pfn) here.
+ */
+ for (pfn = start_pfn;
+ pfn < end_pfn;
+ pfn = ALIGN(pfn + 1, PAGES_PER_SECTION)) {
+
+ if (!pfn_valid(pfn))
+ continue;
+ /*
+ * Nodes's pfns can be overlapping.
+ * We know some arch can have a nodes layout such as
+ * -------------pfn-------------->
+ * N0 | N1 | N2 | N0 | N1 | N2|....
+ */
+ if (pfn_to_nid(pfn) != nid)
+ continue;
+ if (init_section_page_cgroup(pfn, nid))
+ goto oom;
+ }
}
+ hotplug_memory_notifier(page_cgroup_callback, 0);
printk(KERN_INFO "allocated %ld bytes of page_cgroup\n", total_usage);
- printk(KERN_INFO "please try 'cgroup_disable=memory' option if you don't"
- " want memory cgroups\n");
+ printk(KERN_INFO "please try 'cgroup_disable=memory' option if you "
+ "don't want memory cgroups\n");
+ return;
+oom:
+ printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
+ panic("Out of memory");
}
void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
kmem_cache_free(anon_vma_cachep, anon_vma);
}
-static inline struct anon_vma_chain *anon_vma_chain_alloc(void)
+static inline struct anon_vma_chain *anon_vma_chain_alloc(gfp_t gfp)
{
- return kmem_cache_alloc(anon_vma_chain_cachep, GFP_KERNEL);
+ return kmem_cache_alloc(anon_vma_chain_cachep, gfp);
}
static void anon_vma_chain_free(struct anon_vma_chain *anon_vma_chain)
struct mm_struct *mm = vma->vm_mm;
struct anon_vma *allocated;
- avc = anon_vma_chain_alloc();
+ avc = anon_vma_chain_alloc(GFP_KERNEL);
if (!avc)
goto out_enomem;
return -ENOMEM;
}
+/*
+ * This is a useful helper function for locking the anon_vma root as
+ * we traverse the vma->anon_vma_chain, looping over anon_vma's that
+ * have the same vma.
+ *
+ * Such anon_vma's should have the same root, so you'd expect to see
+ * just a single mutex_lock for the whole traversal.
+ */
+static inline struct anon_vma *lock_anon_vma_root(struct anon_vma *root, struct anon_vma *anon_vma)
+{
+ struct anon_vma *new_root = anon_vma->root;
+ if (new_root != root) {
+ if (WARN_ON_ONCE(root))
+ mutex_unlock(&root->mutex);
+ root = new_root;
+ mutex_lock(&root->mutex);
+ }
+ return root;
+}
+
+static inline void unlock_anon_vma_root(struct anon_vma *root)
+{
+ if (root)
+ mutex_unlock(&root->mutex);
+}
+
static void anon_vma_chain_link(struct vm_area_struct *vma,
struct anon_vma_chain *avc,
struct anon_vma *anon_vma)
avc->anon_vma = anon_vma;
list_add(&avc->same_vma, &vma->anon_vma_chain);
- anon_vma_lock(anon_vma);
/*
* It's critical to add new vmas to the tail of the anon_vma,
* see comment in huge_memory.c:__split_huge_page().
*/
list_add_tail(&avc->same_anon_vma, &anon_vma->head);
- anon_vma_unlock(anon_vma);
}
/*
int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
{
struct anon_vma_chain *avc, *pavc;
+ struct anon_vma *root = NULL;
list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
- avc = anon_vma_chain_alloc();
- if (!avc)
- goto enomem_failure;
- anon_vma_chain_link(dst, avc, pavc->anon_vma);
+ struct anon_vma *anon_vma;
+
+ avc = anon_vma_chain_alloc(GFP_NOWAIT | __GFP_NOWARN);
+ if (unlikely(!avc)) {
+ unlock_anon_vma_root(root);
+ root = NULL;
+ avc = anon_vma_chain_alloc(GFP_KERNEL);
+ if (!avc)
+ goto enomem_failure;
+ }
+ anon_vma = pavc->anon_vma;
+ root = lock_anon_vma_root(root, anon_vma);
+ anon_vma_chain_link(dst, avc, anon_vma);
}
+ unlock_anon_vma_root(root);
return 0;
enomem_failure:
anon_vma = anon_vma_alloc();
if (!anon_vma)
goto out_error;
- avc = anon_vma_chain_alloc();
+ avc = anon_vma_chain_alloc(GFP_KERNEL);
if (!avc)
goto out_error_free_anon_vma;
get_anon_vma(anon_vma->root);
/* Mark this anon_vma as the one where our new (COWed) pages go. */
vma->anon_vma = anon_vma;
+ anon_vma_lock(anon_vma);
anon_vma_chain_link(vma, avc, anon_vma);
+ anon_vma_unlock(anon_vma);
return 0;
return -ENOMEM;
}
-static void anon_vma_unlink(struct anon_vma_chain *anon_vma_chain)
-{
- struct anon_vma *anon_vma = anon_vma_chain->anon_vma;
- int empty;
-
- /* If anon_vma_fork fails, we can get an empty anon_vma_chain. */
- if (!anon_vma)
- return;
-
- anon_vma_lock(anon_vma);
- list_del(&anon_vma_chain->same_anon_vma);
-
- /* We must garbage collect the anon_vma if it's empty */
- empty = list_empty(&anon_vma->head);
- anon_vma_unlock(anon_vma);
-
- if (empty)
- put_anon_vma(anon_vma);
-}
-
void unlink_anon_vmas(struct vm_area_struct *vma)
{
struct anon_vma_chain *avc, *next;
+ struct anon_vma *root = NULL;
/*
* Unlink each anon_vma chained to the VMA. This list is ordered
* from newest to oldest, ensuring the root anon_vma gets freed last.
*/
list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
- anon_vma_unlink(avc);
+ struct anon_vma *anon_vma = avc->anon_vma;
+
+ root = lock_anon_vma_root(root, anon_vma);
+ list_del(&avc->same_anon_vma);
+
+ /*
+ * Leave empty anon_vmas on the list - we'll need
+ * to free them outside the lock.
+ */
+ if (list_empty(&anon_vma->head))
+ continue;
+
+ list_del(&avc->same_vma);
+ anon_vma_chain_free(avc);
+ }
+ unlock_anon_vma_root(root);
+
+ /*
+ * Iterate the list once more, it now only contains empty and unlinked
+ * anon_vmas, destroy them. Could not do before due to __put_anon_vma()
+ * needing to acquire the anon_vma->root->mutex.
+ */
+ list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
+ struct anon_vma *anon_vma = avc->anon_vma;
+
+ put_anon_vma(anon_vma);
+
list_del(&avc->same_vma);
anon_vma_chain_free(avc);
}
* Release an obj back to its cache. If the obj has a constructed state, it must
* be in this state _before_ it is released. Called with disabled ints.
*/
-static inline void __cache_free(struct kmem_cache *cachep, void *objp)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp,
+ void *caller)
{
struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
kmemleak_free_recursive(objp, cachep->flags);
- objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
+ objp = cache_free_debugcheck(cachep, objp, caller);
kmemcheck_slab_free(cachep, objp, obj_size(cachep));
debug_check_no_locks_freed(objp, obj_size(cachep));
if (!(cachep->flags & SLAB_DEBUG_OBJECTS))
debug_check_no_obj_freed(objp, obj_size(cachep));
- __cache_free(cachep, objp);
+ __cache_free(cachep, objp, __builtin_return_address(0));
local_irq_restore(flags);
trace_kmem_cache_free(_RET_IP_, objp);
c = virt_to_cache(objp);
debug_check_no_locks_freed(objp, obj_size(c));
debug_check_no_obj_freed(objp, obj_size(c));
- __cache_free(c, (void *)objp);
+ __cache_free(c, (void *)objp, __builtin_return_address(0));
local_irq_restore(flags);
}
EXPORT_SYMBOL(kfree);
BUILD_BUG_ON(PERCPU_DYNAMIC_EARLY_SIZE <
SLUB_PAGE_SHIFT * sizeof(struct kmem_cache_cpu));
-#ifdef CONFIG_CMPXCHG_LOCAL
/*
- * Must align to double word boundary for the double cmpxchg instructions
- * to work.
+ * Must align to double word boundary for the double cmpxchg
+ * instructions to work; see __pcpu_double_call_return_bool().
*/
- s->cpu_slab = __alloc_percpu(sizeof(struct kmem_cache_cpu), 2 * sizeof(void *));
-#else
- /* Regular alignment is sufficient */
- s->cpu_slab = alloc_percpu(struct kmem_cache_cpu);
-#endif
+ s->cpu_slab = __alloc_percpu(sizeof(struct kmem_cache_cpu),
+ 2 * sizeof(void *));
if (!s->cpu_slab)
return 0;
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/swap.h>
+#include <linux/memcontrol.h>
+
+#include <trace/events/vmscan.h>
+
+#define TOKEN_AGING_INTERVAL (0xFF)
static DEFINE_SPINLOCK(swap_token_lock);
struct mm_struct *swap_token_mm;
+struct mem_cgroup *swap_token_memcg;
static unsigned int global_faults;
+static unsigned int last_aging;
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
+{
+ struct mem_cgroup *memcg;
+
+ memcg = try_get_mem_cgroup_from_mm(mm);
+ if (memcg)
+ css_put(mem_cgroup_css(memcg));
+
+ return memcg;
+}
+#else
+static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
+{
+ return NULL;
+}
+#endif
void grab_swap_token(struct mm_struct *mm)
{
int current_interval;
+ unsigned int old_prio = mm->token_priority;
global_faults++;
return;
/* First come first served */
- if (swap_token_mm == NULL) {
- mm->token_priority = mm->token_priority + 2;
- swap_token_mm = mm;
- goto out;
+ if (!swap_token_mm)
+ goto replace_token;
+
+ if ((global_faults - last_aging) > TOKEN_AGING_INTERVAL) {
+ swap_token_mm->token_priority /= 2;
+ last_aging = global_faults;
}
- if (mm != swap_token_mm) {
- if (current_interval < mm->last_interval)
- mm->token_priority++;
- else {
- if (likely(mm->token_priority > 0))
- mm->token_priority--;
- }
- /* Check if we deserve the token */
- if (mm->token_priority > swap_token_mm->token_priority) {
- mm->token_priority += 2;
- swap_token_mm = mm;
- }
- } else {
- /* Token holder came in again! */
+ if (mm == swap_token_mm) {
mm->token_priority += 2;
+ goto update_priority;
+ }
+
+ if (current_interval < mm->last_interval)
+ mm->token_priority++;
+ else {
+ if (likely(mm->token_priority > 0))
+ mm->token_priority--;
}
+ /* Check if we deserve the token */
+ if (mm->token_priority > swap_token_mm->token_priority)
+ goto replace_token;
+
+update_priority:
+ trace_update_swap_token_priority(mm, old_prio, swap_token_mm);
+
out:
mm->faultstamp = global_faults;
mm->last_interval = current_interval;
spin_unlock(&swap_token_lock);
+ return;
+
+replace_token:
+ mm->token_priority += 2;
+ trace_replace_swap_token(swap_token_mm, mm);
+ swap_token_mm = mm;
+ swap_token_memcg = swap_token_memcg_from_mm(mm);
+ last_aging = global_faults;
+ goto out;
}
/* Called on process exit. */
void __put_swap_token(struct mm_struct *mm)
{
spin_lock(&swap_token_lock);
- if (likely(mm == swap_token_mm))
+ if (likely(mm == swap_token_mm)) {
+ trace_put_swap_token(swap_token_mm);
swap_token_mm = NULL;
+ swap_token_memcg = NULL;
+ }
spin_unlock(&swap_token_lock);
}
+
+static bool match_memcg(struct mem_cgroup *a, struct mem_cgroup *b)
+{
+ if (!a)
+ return true;
+ if (!b)
+ return true;
+ if (a == b)
+ return true;
+ return false;
+}
+
+void disable_swap_token(struct mem_cgroup *memcg)
+{
+ /* memcg reclaim don't disable unrelated mm token. */
+ if (match_memcg(memcg, swap_token_memcg)) {
+ spin_lock(&swap_token_lock);
+ if (match_memcg(memcg, swap_token_memcg)) {
+ trace_disable_swap_token(swap_token_mm);
+ swap_token_mm = NULL;
+ swap_token_memcg = NULL;
+ }
+ spin_unlock(&swap_token_lock);
+ }
+}
nr_lumpy_dirty++;
scan++;
} else {
- /* the page is freed already. */
- if (!page_count(cursor_page))
+ /*
+ * Check if the page is freed already.
+ *
+ * We can't use page_count() as that
+ * requires compound_head and we don't
+ * have a pin on the page here. If a
+ * page is tail, we may or may not
+ * have isolated the head, so assume
+ * it's not free, it'd be tricky to
+ * track the head status without a
+ * page pin.
+ */
+ if (!PageTail(cursor_page) &&
+ !atomic_read(&cursor_page->_count))
continue;
break;
}
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
sc->nr_scanned = 0;
if (!priority)
- disable_swap_token();
+ disable_swap_token(sc->mem_cgroup);
total_scanned += shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
/* The swap token gets in the way of swapout... */
if (!priority)
- disable_swap_token();
+ disable_swap_token(NULL);
all_zones_ok = 1;
balanced = 0;
grp->nr_vlans++;
if (ngrp) {
- if (ops->ndo_vlan_rx_register)
+ if (ops->ndo_vlan_rx_register && (real_dev->features & NETIF_F_HW_VLAN_RX))
ops->ndo_vlan_rx_register(real_dev, ngrp);
rcu_assign_pointer(real_dev->vlgrp, ngrp);
}
return false;
skb->dev = vlan_dev;
+ if (skb->pkt_type == PACKET_OTHERHOST) {
+ /* Our lower layer thinks this is not local, let's make sure.
+ * This allows the VLAN to have a different MAC than the
+ * underlying device, and still route correctly. */
+ if (!compare_ether_addr(eth_hdr(skb)->h_dest,
+ vlan_dev->dev_addr))
+ skb->pkt_type = PACKET_HOST;
+ }
+
+ if (!(vlan_dev_info(vlan_dev)->flags & VLAN_FLAG_REORDER_HDR)) {
+ unsigned int offset = skb->data - skb_mac_header(skb);
+
+ /*
+ * vlan_insert_tag expect skb->data pointing to mac header.
+ * So change skb->data before calling it and change back to
+ * original position later
+ */
+ skb_push(skb, offset);
+ skb = *skbp = vlan_insert_tag(skb, skb->vlan_tci);
+ if (!skb)
+ return false;
+ skb_pull(skb, offset + VLAN_HLEN);
+ skb_reset_mac_len(skb);
+ }
+
skb->priority = vlan_get_ingress_priority(vlan_dev, skb->vlan_tci);
skb->vlan_tci = 0;
u64_stats_update_begin(&rx_stats->syncp);
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
-
- switch (skb->pkt_type) {
- case PACKET_BROADCAST:
- break;
- case PACKET_MULTICAST:
+ if (skb->pkt_type == PACKET_MULTICAST)
rx_stats->rx_multicast++;
- break;
- case PACKET_OTHERHOST:
- /* Our lower layer thinks this is not local, let's make sure.
- * This allows the VLAN to have a different MAC than the
- * underlying device, and still route correctly. */
- if (!compare_ether_addr(eth_hdr(skb)->h_dest,
- vlan_dev->dev_addr))
- skb->pkt_type = PACKET_HOST;
- break;
- }
u64_stats_update_end(&rx_stats->syncp);
return true;
}
EXPORT_SYMBOL(vlan_gro_frags);
-static struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
{
- if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
- if (skb_cow(skb, skb_headroom(skb)) < 0)
- skb = NULL;
- if (skb) {
- /* Lifted from Gleb's VLAN code... */
- memmove(skb->data - ETH_HLEN,
- skb->data - VLAN_ETH_HLEN, 12);
- skb->mac_header += VLAN_HLEN;
- }
- }
+ if (skb_cow(skb, skb_headroom(skb)) < 0)
+ return NULL;
+ memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
+ skb->mac_header += VLAN_HLEN;
+ skb_reset_mac_len(skb);
return skb;
}
skb_pull_rcsum(skb, VLAN_HLEN);
vlan_set_encap_proto(skb, vhdr);
- skb = vlan_check_reorder_header(skb);
+ skb = vlan_reorder_header(skb);
if (unlikely(!skb))
goto err_free;
* command otherwise */
u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 };
- /* Events for 1.2 and newer controllers */
- if (hdev->lmp_ver > 1) {
- events[4] |= 0x01; /* Flow Specification Complete */
- events[4] |= 0x02; /* Inquiry Result with RSSI */
- events[4] |= 0x04; /* Read Remote Extended Features Complete */
- events[5] |= 0x08; /* Synchronous Connection Complete */
- events[5] |= 0x10; /* Synchronous Connection Changed */
- }
+ /* CSR 1.1 dongles does not accept any bitfield so don't try to set
+ * any event mask for pre 1.2 devices */
+ if (hdev->lmp_ver <= 1)
+ return;
+
+ events[4] |= 0x01; /* Flow Specification Complete */
+ events[4] |= 0x02; /* Inquiry Result with RSSI */
+ events[4] |= 0x04; /* Read Remote Extended Features Complete */
+ events[5] |= 0x08; /* Synchronous Connection Complete */
+ events[5] |= 0x10; /* Synchronous Connection Changed */
if (hdev->features[3] & LMP_RSSI_INQ)
events[4] |= 0x04; /* Inquiry Result with RSSI */
break;
}
+ memset(&cinfo, 0, sizeof(cinfo));
cinfo.hci_handle = chan->conn->hcon->handle;
memcpy(cinfo.dev_class, chan->conn->hcon->dev_class, 3);
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
+ memset(&cinfo, 0, sizeof(cinfo));
cinfo.hci_handle = conn->hcon->handle;
memcpy(cinfo.dev_class, conn->hcon->dev_class, 3);
case BT_CONNECTED:
case BT_CONFIG:
+ if (sco_pi(sk)->conn) {
+ sk->sk_state = BT_DISCONN;
+ sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT);
+ hci_conn_put(sco_pi(sk)->conn->hcon);
+ sco_pi(sk)->conn->hcon = NULL;
+ } else
+ sco_chan_del(sk, ECONNRESET);
+ break;
+
case BT_CONNECT:
case BT_DISCONN:
sco_chan_del(sk, ECONNRESET);
conn->sk = NULL;
sco_pi(sk)->conn = NULL;
sco_conn_unlock(conn);
- hci_conn_put(conn->hcon);
+
+ if (conn->hcon)
+ hci_conn_put(conn->hcon);
}
sk->sk_state = BT_CLOSED;
goto out;
np->dev = p->dev;
+ strlcpy(np->dev_name, p->dev->name, IFNAMSIZ);
err = __netpoll_setup(np);
if (err) {
switch (ih->type) {
case IGMP_HOST_MEMBERSHIP_REPORT:
case IGMPV2_HOST_MEMBERSHIP_REPORT:
- BR_INPUT_SKB_CB(skb2)->mrouters_only = 1;
+ BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
err = br_ip4_multicast_add_group(br, port, ih->group);
break;
case IGMPV3_HOST_MEMBERSHIP_REPORT:
goto out;
}
mld = (struct mld_msg *)skb_transport_header(skb2);
- BR_INPUT_SKB_CB(skb2)->mrouters_only = 1;
+ BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
err = br_ip6_multicast_add_group(br, port, &mld->mld_mca);
break;
}
{
}
+static u32 *fake_cow_metrics(struct dst_entry *dst, unsigned long old)
+{
+ return NULL;
+}
+
static struct dst_ops fake_dst_ops = {
.family = AF_INET,
.protocol = cpu_to_be16(ETH_P_IP),
.update_pmtu = fake_update_pmtu,
+ .cow_metrics = fake_cow_metrics,
};
/*
if (cfsrvl_phyid_match(layer, phyid) && layer->ctrlcmd) {
- if ((ctrl == _CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND ||
+ if ((ctrl == _CAIF_CTRLCMD_PHYIF_DOWN_IND ||
ctrl == CAIF_CTRLCMD_REMOTE_SHUTDOWN_IND) &&
layer->id != 0) {
round_jiffies_relative(delay));
}
+static void complete_request(struct ceph_osd_request *req)
+{
+ if (req->r_safe_callback)
+ req->r_safe_callback(req, NULL);
+ complete_all(&req->r_safe_completion); /* fsync waiter */
+}
+
/*
* handle osd op reply. either call the callback if it is specified,
* or do the completion to wake up the waiting thread.
else
complete_all(&req->r_completion);
- if (flags & CEPH_OSD_FLAG_ONDISK) {
- if (req->r_safe_callback)
- req->r_safe_callback(req, msg);
- complete_all(&req->r_safe_completion); /* fsync waiter */
- }
+ if (flags & CEPH_OSD_FLAG_ONDISK)
+ complete_request(req);
done:
dout("req=%p req->r_linger=%d\n", req, req->r_linger);
__cancel_request(req);
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
+ complete_request(req);
dout("wait_request tid %llu canceled/timed out\n", req->r_tid);
return rc;
}
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
- skb->mac_len = skb->network_header - skb->mac_header;
+ skb_reset_mac_len(skb);
pt_prev = NULL;
oldsd->output_queue = NULL;
oldsd->output_queue_tailp = &oldsd->output_queue;
}
+ /* Append NAPI poll list from offline CPU. */
+ if (!list_empty(&oldsd->poll_list)) {
+ list_splice_init(&oldsd->poll_list, &sd->poll_list);
+ raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ }
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_enable();
/**
* netdev_drivername - network driver for the device
* @dev: network device
- * @buffer: buffer for resulting name
- * @len: size of buffer
*
* Determine network driver for device.
*/
-char *netdev_drivername(const struct net_device *dev, char *buffer, int len)
+const char *netdev_drivername(const struct net_device *dev)
{
const struct device_driver *driver;
const struct device *parent;
-
- if (len <= 0 || !buffer)
- return buffer;
- buffer[0] = 0;
+ const char *empty = "";
parent = dev->dev.parent;
-
if (!parent)
- return buffer;
+ return empty;
driver = parent->driver;
if (driver && driver->name)
- strlcpy(buffer, driver->name, len);
- return buffer;
+ return driver->name;
+ return empty;
}
static int __netdev_printk(const char *level, const struct net_device *dev,
#endif
}
-static const void *net_current_ns(void)
+static void *net_grab_current_ns(void)
{
- return current->nsproxy->net_ns;
+ struct net *ns = current->nsproxy->net_ns;
+#ifdef CONFIG_NET_NS
+ if (ns)
+ atomic_inc(&ns->passive);
+#endif
+ return ns;
}
static const void *net_initial_ns(void)
struct kobj_ns_type_operations net_ns_type_operations = {
.type = KOBJ_NS_TYPE_NET,
- .current_ns = net_current_ns,
+ .grab_current_ns = net_grab_current_ns,
.netlink_ns = net_netlink_ns,
.initial_ns = net_initial_ns,
+ .drop_ns = net_drop_ns,
};
EXPORT_SYMBOL_GPL(net_ns_type_operations);
-static void net_kobj_ns_exit(struct net *net)
-{
- kobj_ns_exit(KOBJ_NS_TYPE_NET, net);
-}
-
-static struct pernet_operations kobj_net_ops = {
- .exit = net_kobj_ns_exit,
-};
-
-
#ifdef CONFIG_HOTPLUG
static int netdev_uevent(struct device *d, struct kobj_uevent_env *env)
{
int netdev_kobject_init(void)
{
kobj_ns_type_register(&net_ns_type_operations);
- register_pernet_subsys(&kobj_net_ops);
return class_register(&net_class);
}
LIST_HEAD(net_exit_list);
atomic_set(&net->count, 1);
+ atomic_set(&net->passive, 1);
#ifdef NETNS_REFCNT_DEBUG
atomic_set(&net->use_count, 0);
kmem_cache_free(net_cachep, net);
}
+void net_drop_ns(void *p)
+{
+ struct net *ns = p;
+ if (ns && atomic_dec_and_test(&ns->passive))
+ net_free(ns);
+}
+
struct net *copy_net_ns(unsigned long flags, struct net *old_net)
{
struct net *net;
}
mutex_unlock(&net_mutex);
if (rv < 0) {
- net_free(net);
+ net_drop_ns(net);
return ERR_PTR(rv);
}
return net;
/* Finally it is safe to free my network namespace structure */
list_for_each_entry_safe(net, tmp, &net_exit_list, exit_list) {
list_del_init(&net->exit_list);
- net_free(net);
+ net_drop_ns(net);
}
}
static DECLARE_WORK(net_cleanup_work, cleanup_net);
struct file *file;
struct net *net;
- net = ERR_PTR(-EINVAL);
file = proc_ns_fget(fd);
- if (!file)
- goto out;
+ if (IS_ERR(file))
+ return ERR_CAST(file);
ei = PROC_I(file->f_dentry->d_inode);
- if (ei->ns_ops != &netns_operations)
- goto out;
+ if (ei->ns_ops == &netns_operations)
+ net = get_net(ei->ns);
+ else
+ net = ERR_PTR(-EINVAL);
- net = get_net(ei->ns);
-out:
- if (file)
- fput(file);
+ fput(file);
return net;
}
return -ENODEV;
}
+ if (ndev->master) {
+ printk(KERN_ERR "%s: %s is a slave device, aborting.\n",
+ np->name, np->dev_name);
+ err = -EBUSY;
+ goto put;
+ }
+
if (!netif_running(ndev)) {
unsigned long atmost, atleast;
pr_debug("%s\n", __func__);
if (!buf)
- goto out;
+ return -EMSGSIZE;
hdr = genlmsg_put(msg, 0, seq, &nl802154_family, flags,
IEEE802154_LIST_PHY);
pages * sizeof(uint32_t), buf);
mutex_unlock(&phy->pib_lock);
+ kfree(buf);
return genlmsg_end(msg, hdr);
nla_put_failure:
lock_sock(sk2);
+ sock_rps_record_flow(sk2);
WARN_ON(!((1 << sk2->sk_state) &
(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE)));
return 0;
if (cc == len)
return 1;
- if (op->yes < 4)
+ if (op->yes < 4 || op->yes & 3)
return 0;
len -= op->yes;
bc += op->yes;
static int inet_diag_bc_audit(const void *bytecode, int bytecode_len)
{
- const unsigned char *bc = bytecode;
+ const void *bc = bytecode;
int len = bytecode_len;
while (len > 0) {
- struct inet_diag_bc_op *op = (struct inet_diag_bc_op *)bc;
+ const struct inet_diag_bc_op *op = bc;
//printk("BC: %d %d %d {%d} / %d\n", op->code, op->yes, op->no, op[1].no, len);
switch (op->code) {
case INET_DIAG_BC_S_LE:
case INET_DIAG_BC_D_GE:
case INET_DIAG_BC_D_LE:
- if (op->yes < 4 || op->yes > len + 4)
- return -EINVAL;
case INET_DIAG_BC_JMP:
- if (op->no < 4 || op->no > len + 4)
+ if (op->no < 4 || op->no > len + 4 || op->no & 3)
return -EINVAL;
if (op->no < len &&
!valid_cc(bytecode, bytecode_len, len - op->no))
return -EINVAL;
break;
case INET_DIAG_BC_NOP:
- if (op->yes < 4 || op->yes > len + 4)
- return -EINVAL;
break;
default:
return -EINVAL;
}
+ if (op->yes < 4 || op->yes > len + 4 || op->yes & 3)
+ return -EINVAL;
bc += op->yes;
len -= op->yes;
}
int csummode = CHECKSUM_NONE;
struct rtable *rt = (struct rtable *)cork->dst;
- exthdrlen = transhdrlen ? rt->dst.header_len : 0;
+ skb = skb_peek_tail(queue);
+
+ exthdrlen = !skb ? rt->dst.header_len : 0;
length += exthdrlen;
transhdrlen += exthdrlen;
mtu = cork->fragsize;
!exthdrlen)
csummode = CHECKSUM_PARTIAL;
- skb = skb_peek_tail(queue);
-
cork->length += length;
if (((length > mtu) || (skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
else
pmsg->outdev_name[0] = '\0';
- if (entry->indev && entry->skb->dev) {
+ if (entry->indev && entry->skb->dev &&
+ entry->skb->mac_header != entry->skb->network_header) {
pmsg->hw_type = entry->skb->dev->type;
pmsg->hw_addrlen = dev_parse_header(entry->skb,
pmsg->hw_addr);
static inline void
__ipq_rcv_skb(struct sk_buff *skb)
{
- int status, type, pid, flags, nlmsglen, skblen;
+ int status, type, pid, flags;
+ unsigned int nlmsglen, skblen;
struct nlmsghdr *nlh;
skblen = skb->len;
const struct xt_entry_target *t;
if (!ip_checkentry(&e->ip)) {
- duprintf("ip check failed %p %s.\n", e, par->match->name);
+ duprintf("ip check failed %p %s.\n", e, name);
return -EINVAL;
}
* error messages (RELATED) and information requests (see below) */
if (ip_hdr(skb)->protocol == IPPROTO_ICMP &&
(ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY))
+ ctinfo == IP_CT_RELATED_REPLY))
return XT_CONTINUE;
/* ip_conntrack_icmp guarantees us that we only have ICMP_ECHO,
ct->mark = hash;
break;
case IP_CT_RELATED:
- case IP_CT_RELATED+IP_CT_IS_REPLY:
+ case IP_CT_RELATED_REPLY:
/* FIXME: we don't handle expectations at the
* moment. they can arrive on a different node than
* the master connection (e.g. FTP passive mode) */
case IP_CT_ESTABLISHED:
- case IP_CT_ESTABLISHED+IP_CT_IS_REPLY:
+ case IP_CT_ESTABLISHED_REPLY:
break;
default:
break;
nat = nfct_nat(ct);
NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+ ctinfo == IP_CT_RELATED_REPLY));
/* Source address is 0.0.0.0 - locally generated packet that is
* probably not supposed to be masqueraded.
static inline bool match_ip(const struct sk_buff *skb,
const struct ipt_ecn_info *einfo)
{
- return (ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect;
+ return ((ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect) ^
+ !!(einfo->invert & IPT_ECN_OP_MATCH_IP);
}
static inline bool match_tcp(const struct sk_buff *skb,
return false;
if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR)) {
- if (ip_hdr(skb)->protocol != IPPROTO_TCP)
- return false;
if (!match_tcp(skb, info, &par->hotdrop))
return false;
}
return -EINVAL;
if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR) &&
- ip->proto != IPPROTO_TCP) {
+ (ip->proto != IPPROTO_TCP || ip->invflags & IPT_INV_PROTO)) {
pr_info("cannot match TCP bits in rule for non-tcp packets\n");
return -EINVAL;
}
/* This is where we call the helper: as the packet goes out. */
ct = nf_ct_get(skb, &ctinfo);
- if (!ct || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY)
+ if (!ct || ctinfo == IP_CT_RELATED_REPLY)
goto out;
help = nfct_help(ct);
return ret;
}
- if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status)) {
+ /* adjust seqs for loopback traffic only in outgoing direction */
+ if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status) &&
+ !nf_is_loopback_packet(skb)) {
typeof(nf_nat_seq_adjust_hook) seq_adjust;
seq_adjust = rcu_dereference(nf_nat_seq_adjust_hook);
/* Update skb to refer to this connection */
skb->nfct = &nf_ct_tuplehash_to_ctrack(h)->ct_general;
skb->nfctinfo = *ctinfo;
- return -NF_ACCEPT;
+ return NF_ACCEPT;
}
/* Small and modified version of icmp_rcv */
/* Must be RELATED */
NF_CT_ASSERT(skb->nfctinfo == IP_CT_RELATED ||
- skb->nfctinfo == IP_CT_RELATED+IP_CT_IS_REPLY);
+ skb->nfctinfo == IP_CT_RELATED_REPLY);
/* Redirects on non-null nats must be dropped, else they'll
start talking to each other without our translation, and be
if (skb->ip_summed != CHECKSUM_PARTIAL) {
if (!(rt->rt_flags & RTCF_LOCAL) &&
- skb->dev->features & NETIF_F_V4_CSUM) {
+ (!skb->dev || skb->dev->features & NETIF_F_V4_CSUM)) {
skb->ip_summed = CHECKSUM_PARTIAL;
skb->csum_start = skb_headroom(skb) +
skb_network_offset(skb) +
/* Connection must be valid and new. */
NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+ ctinfo == IP_CT_RELATED_REPLY));
NF_CT_ASSERT(par->out != NULL);
return nf_nat_setup_info(ct, &mr->range[0], IP_NAT_MANIP_SRC);
switch (ctinfo) {
case IP_CT_RELATED:
- case IP_CT_RELATED+IP_CT_IS_REPLY:
+ case IP_CT_RELATED_REPLY:
if (ip_hdr(skb)->protocol == IPPROTO_ICMP) {
if (!nf_nat_icmp_reply_translation(ct, ctinfo,
hooknum, skb))
default:
/* ESTABLISHED */
NF_CT_ASSERT(ctinfo == IP_CT_ESTABLISHED ||
- ctinfo == (IP_CT_ESTABLISHED+IP_CT_IS_REPLY));
+ ctinfo == IP_CT_ESTABLISHED_REPLY);
}
return nf_nat_packet(ct, ctinfo, hooknum, skb);
#include <linux/proc_fs.h>
#include <net/sock.h>
#include <net/ping.h>
-#include <net/icmp.h>
#include <net/udp.h>
#include <net/route.h>
#include <net/inet_common.h>
;
}
+static bool peer_pmtu_expired(struct inet_peer *peer)
+{
+ unsigned long orig = ACCESS_ONCE(peer->pmtu_expires);
+
+ return orig &&
+ time_after_eq(jiffies, orig) &&
+ cmpxchg(&peer->pmtu_expires, orig, 0) == orig;
+}
+
+static bool peer_pmtu_cleaned(struct inet_peer *peer)
+{
+ unsigned long orig = ACCESS_ONCE(peer->pmtu_expires);
+
+ return orig &&
+ cmpxchg(&peer->pmtu_expires, orig, 0) == orig;
+}
+
static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst)
{
struct rtable *rt = (struct rtable *)dst;
rt_genid(dev_net(dst->dev)));
rt_del(hash, rt);
ret = NULL;
- } else if (rt->peer &&
- rt->peer->pmtu_expires &&
- time_after_eq(jiffies, rt->peer->pmtu_expires)) {
- unsigned long orig = rt->peer->pmtu_expires;
-
- if (cmpxchg(&rt->peer->pmtu_expires, orig, 0) == orig)
- dst_metric_set(dst, RTAX_MTU,
- rt->peer->pmtu_orig);
+ } else if (rt->peer && peer_pmtu_expired(rt->peer)) {
+ dst_metric_set(dst, RTAX_MTU, rt->peer->pmtu_orig);
}
}
return ret;
static void check_peer_pmtu(struct dst_entry *dst, struct inet_peer *peer)
{
- unsigned long expires = peer->pmtu_expires;
+ unsigned long expires = ACCESS_ONCE(peer->pmtu_expires);
+ if (!expires)
+ return;
if (time_before(jiffies, expires)) {
u32 orig_dst_mtu = dst_mtu(dst);
if (peer->pmtu_learned < orig_dst_mtu) {
rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
if (peer) {
+ unsigned long pmtu_expires = ACCESS_ONCE(peer->pmtu_expires);
+
if (mtu < ip_rt_min_pmtu)
mtu = ip_rt_min_pmtu;
- if (!peer->pmtu_expires || mtu < peer->pmtu_learned) {
- unsigned long pmtu_expires;
+ if (!pmtu_expires || mtu < peer->pmtu_learned) {
pmtu_expires = jiffies + ip_rt_mtu_expires;
if (!pmtu_expires)
rt_bind_peer(rt, rt->rt_dst, 0);
peer = rt->peer;
- if (peer && peer->pmtu_expires)
+ if (peer) {
check_peer_pmtu(dst, peer);
- if (peer && peer->redirect_learned.a4 &&
- peer->redirect_learned.a4 != rt->rt_gateway) {
- if (check_peer_redir(dst, peer))
- return NULL;
+ if (peer->redirect_learned.a4 &&
+ peer->redirect_learned.a4 != rt->rt_gateway) {
+ if (check_peer_redir(dst, peer))
+ return NULL;
+ }
}
rt->rt_peer_genid = rt_peer_genid();
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
rt = skb_rtable(skb);
- if (rt &&
- rt->peer &&
- rt->peer->pmtu_expires) {
- unsigned long orig = rt->peer->pmtu_expires;
-
- if (cmpxchg(&rt->peer->pmtu_expires, orig, 0) == orig)
- dst_metric_set(&rt->dst, RTAX_MTU, rt->peer->pmtu_orig);
- }
+ if (rt && rt->peer && peer_pmtu_cleaned(rt->peer))
+ dst_metric_set(&rt->dst, RTAX_MTU, rt->peer->pmtu_orig);
}
static int ip_rt_bug(struct sk_buff *skb)
sizeof(u32) * RTAX_MAX);
dst_init_metrics(&rt->dst, peer->metrics, false);
- if (peer->pmtu_expires)
- check_peer_pmtu(&rt->dst, peer);
+ check_peer_pmtu(&rt->dst, peer);
if (peer->redirect_learned.a4 &&
peer->redirect_learned.a4 != rt->rt_gateway) {
rt->rt_gateway = peer->redirect_learned.a4;
hash = rt_hash(daddr, saddr, dev->ifindex, rt_genid(dev_net(dev)));
rth = rt_intern_hash(hash, rth, skb, dev->ifindex);
- err = 0;
- if (IS_ERR(rth))
- err = PTR_ERR(rth);
+ return IS_ERR(rth) ? PTR_ERR(rth) : 0;
e_nobufs:
return -ENOBUFS;
struct rtable *rt = skb_rtable(skb);
struct rtmsg *r;
struct nlmsghdr *nlh;
- long expires;
+ long expires = 0;
+ const struct inet_peer *peer = rt->peer;
u32 id = 0, ts = 0, tsage = 0, error;
nlh = nlmsg_put(skb, pid, seq, event, sizeof(*r), flags);
NLA_PUT_BE32(skb, RTA_MARK, rt->rt_mark);
error = rt->dst.error;
- expires = (rt->peer && rt->peer->pmtu_expires) ?
- rt->peer->pmtu_expires - jiffies : 0;
- if (rt->peer) {
+ if (peer) {
inet_peer_refcheck(rt->peer);
- id = atomic_read(&rt->peer->ip_id_count) & 0xffff;
- if (rt->peer->tcp_ts_stamp) {
- ts = rt->peer->tcp_ts;
- tsage = get_seconds() - rt->peer->tcp_ts_stamp;
+ id = atomic_read(&peer->ip_id_count) & 0xffff;
+ if (peer->tcp_ts_stamp) {
+ ts = peer->tcp_ts;
+ tsage = get_seconds() - peer->tcp_ts_stamp;
}
+ expires = ACCESS_ONCE(peer->pmtu_expires);
+ if (expires)
+ expires -= jiffies;
}
if (rt_is_input_route(rt)) {
goto discard;
if (nsk != sk) {
+ sock_rps_save_rxhash(nsk, skb->rxhash);
if (tcp_child_process(sk, nsk, skb)) {
rsk = nsk;
goto reset;
if (addr_len < SIN6_LEN_RFC2133)
return -EINVAL;
+
+ if (addr->sin6_family != AF_INET6)
+ return -EINVAL;
+
addr_type = ipv6_addr_type(&addr->sin6_addr);
if ((addr_type & IPV6_ADDR_MULTICAST) && sock->type == SOCK_STREAM)
return -EINVAL;
else
pmsg->outdev_name[0] = '\0';
- if (entry->indev && entry->skb->dev) {
+ if (entry->indev && entry->skb->dev &&
+ entry->skb->mac_header != entry->skb->network_header) {
pmsg->hw_type = entry->skb->dev->type;
pmsg->hw_addrlen = dev_parse_header(entry->skb, pmsg->hw_addr);
}
static inline void
__ipq_rcv_skb(struct sk_buff *skb)
{
- int status, type, pid, flags, nlmsglen, skblen;
+ int status, type, pid, flags;
+ unsigned int nlmsglen, skblen;
struct nlmsghdr *nlh;
skblen = skb->len;
/* This is where we call the helper: as the packet goes out. */
ct = nf_ct_get(skb, &ctinfo);
- if (!ct || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY)
+ if (!ct || ctinfo == IP_CT_RELATED_REPLY)
goto out;
help = nfct_help(ct);
/* Update skb to refer to this connection */
skb->nfct = &nf_ct_tuplehash_to_ctrack(h)->ct_general;
skb->nfctinfo = *ctinfo;
- return -NF_ACCEPT;
+ return NF_ACCEPT;
}
static int
* the new socket..
*/
if(nsk != sk) {
+ sock_rps_save_rxhash(nsk, skb->rxhash);
if (tcp_child_process(sk, nsk, skb))
goto reset;
if (opt_skb)
iriap_watchdog_timer_expired);
}
+static struct lock_class_key irias_objects_key;
+
/*
* Function iriap_init (void)
*
return -ENOMEM;
}
+ lockdep_set_class_and_name(&irias_objects->hb_spinlock, &irias_objects_key,
+ "irias_objects");
+
/*
* Register some default services for IrLMP
*/
*/
pd->net = get_net_ns_by_pid(current->pid);
if (IS_ERR(pd->net)) {
- rc = -PTR_ERR(pd->net);
+ rc = PTR_ERR(pd->net);
goto err_free_pd;
}
mutex_lock(&sdata->u.ibss.mtx);
+ sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
+ memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+ sdata->u.ibss.ssid_len = 0;
+
active_ibss = ieee80211_sta_active_ibss(sdata);
if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
kfree_skb(skb);
skb_queue_purge(&sdata->skb_queue);
- memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
- sdata->u.ibss.ssid_len = 0;
del_timer_sync(&sdata->u.ibss.timer);
int tx_headroom; /* required headroom for hardware/radiotap */
- /* count for keys needing tailroom space allocation */
- int crypto_tx_tailroom_needed_cnt;
-
/* Tasklet and skb queue to process calls from IRQ mode. All frames
* added to skb_queue will be processed, but frames in
* skb_queue_unreliable may be dropped if the total length of these
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+ ret = dev_alloc_name(ndev, ndev->name);
+ if (ret < 0)
+ goto fail;
+
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
-
- if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
- (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
- key->local->crypto_tx_tailroom_needed_cnt--;
-
return 0;
}
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
-
- if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
- (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
- key->local->crypto_tx_tailroom_needed_cnt++;
}
void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
ieee80211_aes_key_free(key->u.ccmp.tfm);
if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
- if (key->local) {
+ if (key->local)
ieee80211_debugfs_key_remove(key);
- key->local->crypto_tx_tailroom_needed_cnt--;
- }
kfree(key);
}
ieee80211_debugfs_key_add(key);
- key->local->crypto_tx_tailroom_needed_cnt++;
-
ret = ieee80211_key_enable_hw_accel(key);
mutex_unlock(&sdata->local->key_mtx);
mutex_lock(&sdata->local->key_mtx);
- sdata->local->crypto_tx_tailroom_needed_cnt = 0;
-
- list_for_each_entry(key, &sdata->key_list, list) {
- sdata->local->crypto_tx_tailroom_needed_cnt++;
+ list_for_each_entry(key, &sdata->key_list, list)
ieee80211_key_enable_hw_accel(key);
- }
mutex_unlock(&sdata->local->key_mtx);
}
WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
}
- ieee80211_stop_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
-
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
rcu_read_unlock();
}
- ieee80211_wake_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
-
ht_opmode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
{
int tail_need = 0;
- if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) {
+ /*
+ * This could be optimised, devices that do full hardware
+ * crypto (including TKIP MMIC) need no tailroom... But we
+ * have no drivers for such devices currently.
+ */
+ if (may_encrypt) {
tail_need = IEEE80211_ENCRYPT_TAILROOM;
tail_need -= skb_tailroom(skb);
tail_need = max_t(int, tail_need, 0);
if (!attr[IPSET_ATTR_SETNAME]) {
for (i = 0; i < ip_set_max; i++) {
if (ip_set_list[i] != NULL && ip_set_list[i]->ref) {
- ret = IPSET_ERR_BUSY;
+ ret = -IPSET_ERR_BUSY;
goto out;
}
}
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_ipportnet4_elem data =
- { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_ipportnet4_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_ipportnet6_elem data =
- { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_ipportnet6_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_net4_elem data = { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_net4_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_net6_elem data = { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_net6_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netport4_elem data = {
- .cidr = h->nets[0].cidr || HOST_MASK };
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netport6_elem data = {
- .cidr = h->nets[0].cidr || HOST_MASK };
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
if (cp->control)
ip_vs_control_del(cp);
- if (cp->flags & IP_VS_CONN_F_NFCT)
+ if (cp->flags & IP_VS_CONN_F_NFCT) {
ip_vs_conn_drop_conntrack(cp);
+ /* Do not access conntracks during subsys cleanup
+ * because nf_conntrack_find_get can not be used after
+ * conntrack cleanup for the net.
+ */
+ smp_rmb();
+ if (ipvs->enable)
+ ip_vs_conn_drop_conntrack(cp);
+ }
ip_vs_pe_put(cp->pe);
kfree(cp->pe_data);
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 99,
+ .priority = NF_IP_PRI_NAT_SRC - 2,
},
/* After packet filtering, forward packet through VS/DR, VS/TUN,
* or VS/NAT(change destination), so that filtering rules can be
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 101,
+ .priority = NF_IP_PRI_NAT_SRC - 1,
},
/* Before ip_vs_in, change source only for VS/NAT */
{
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -99,
+ .priority = NF_IP_PRI_NAT_DST + 1,
},
/* After mangle, schedule and forward local requests */
{
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -98,
+ .priority = NF_IP_PRI_NAT_DST + 2,
},
/* After packet filtering (but before ip_vs_out_icmp), catch icmp
* destined for 0.0.0.0/0, which is for incoming IPVS connections */
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 99,
+ .priority = NF_IP6_PRI_NAT_SRC - 2,
},
/* After packet filtering, forward packet through VS/DR, VS/TUN,
* or VS/NAT(change destination), so that filtering rules can be
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 101,
+ .priority = NF_IP6_PRI_NAT_SRC - 1,
},
/* Before ip_vs_in, change source only for VS/NAT */
{
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -99,
+ .priority = NF_IP6_PRI_NAT_DST + 1,
},
/* After mangle, schedule and forward local requests */
{
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -98,
+ .priority = NF_IP6_PRI_NAT_DST + 2,
},
/* After packet filtering (but before ip_vs_out_icmp), catch icmp
* destined for 0.0.0.0/0, which is for incoming IPVS connections */
{
EnterFunction(2);
net_ipvs(net)->enable = 0; /* Disable packet reception */
+ smp_wmb();
__ip_vs_sync_cleanup(net);
LeaveFunction(2);
}
/* It exists; we have (non-exclusive) reference. */
if (NF_CT_DIRECTION(h) == IP_CT_DIR_REPLY) {
- *ctinfo = IP_CT_ESTABLISHED + IP_CT_IS_REPLY;
+ *ctinfo = IP_CT_ESTABLISHED_REPLY;
/* Please set reply bit if this packet OK */
*set_reply = 1;
} else {
ret = -ret;
goto out;
}
+ /* ICMP[v6] protocol trackers may assign one conntrack. */
+ if (skb->nfct)
+ goto out;
}
ct = resolve_normal_ct(net, tmpl, skb, dataoff, pf, protonum,
/* This ICMP is in reverse direction to the packet which caused it */
ct = nf_ct_get(skb, &ctinfo);
if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL)
- ctinfo = IP_CT_RELATED + IP_CT_IS_REPLY;
+ ctinfo = IP_CT_RELATED_REPLY;
else
ctinfo = IP_CT_RELATED;
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ ctinfo != IP_CT_ESTABLISHED_REPLY) {
pr_debug("ftp: Conntrackinfo = %u\n", ctinfo);
return NF_ACCEPT;
}
int ret;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
- }
+
pr_debug("nf_ct_h245: skblen = %u\n", skb->len);
spin_lock_bh(&nf_h323_lock);
int ret;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
- }
+
pr_debug("nf_ct_q931: skblen = %u\n", skb->len);
spin_lock_bh(&nf_h323_lock);
return NF_ACCEPT;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* Not a full tcp header? */
u_int16_t msg;
/* don't do any tracking before tcp handshake complete */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
nexthdr_off = protoff;
ct_sane_info = &nfct_help(ct)->help.ct_sane_info;
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY)
+ ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* Not a full tcp header? */
typeof(nf_nat_sip_seq_adjust_hook) nf_nat_sip_seq_adjust;
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* No Data ? */
if (skb->mark)
NLA_PUT_BE32(inst->skb, NFULA_MARK, htonl(skb->mark));
- if (indev && skb->dev) {
+ if (indev && skb->dev &&
+ skb->mac_header != skb->network_header) {
struct nfulnl_msg_packet_hw phw;
int len = dev_parse_header(skb, phw.hw_addr);
if (len > 0) {
if (entskb->mark)
NLA_PUT_BE32(skb, NFQA_MARK, htonl(entskb->mark));
- if (indev && entskb->dev) {
+ if (indev && entskb->dev &&
+ entskb->mac_header != entskb->network_header) {
struct nfqnl_msg_packet_hw phw;
int len = dev_parse_header(entskb, phw.hw_addr);
if (len) {
ct = nf_ct_get(skb, &ctinfo);
if (ct && !nf_ct_is_untracked(ct) &&
((iph->protocol != IPPROTO_ICMP &&
- ctinfo == IP_CT_IS_REPLY + IP_CT_ESTABLISHED) ||
+ ctinfo == IP_CT_ESTABLISHED_REPLY) ||
(iph->protocol == IPPROTO_ICMP &&
- ctinfo == IP_CT_IS_REPLY + IP_CT_RELATED)) &&
+ ctinfo == IP_CT_RELATED_REPLY)) &&
(ct->status & IPS_SRC_NAT_DONE)) {
daddr = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
} else {
h.h2->tp_vlan_tci = 0;
}
+ h.h2->tp_padding = 0;
hdrlen = sizeof(*h.h2);
break;
default:
} else {
aux.tp_vlan_tci = 0;
}
+ aux.tp_padding = 0;
put_cmsg(msg, SOL_PACKET, PACKET_AUXDATA, sizeof(aux), &aux);
}
}
if (some_queue_timedout) {
- char drivername[64];
WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n",
- dev->name, netdev_drivername(dev, drivername, 64), i);
+ dev->name, netdev_drivername(dev), i);
dev->netdev_ops->ndo_tx_timeout(dev);
}
if (!mod_timer(&dev->watchdog_timer,
#include <linux/sunrpc/gss_krb5.h>
#include <linux/sunrpc/xdr.h>
#include <linux/crypto.h>
+#include <linux/sunrpc/gss_krb5_enctypes.h>
#ifdef RPC_DEBUG
# define RPCDBG_FACILITY RPCDBG_AUTH
.gm_ops = &gss_kerberos_ops,
.gm_pf_num = ARRAY_SIZE(gss_kerberos_pfs),
.gm_pfs = gss_kerberos_pfs,
- .gm_upcall_enctypes = "18,17,16,23,3,1,2",
+ .gm_upcall_enctypes = KRB5_SUPPORTED_ENCTYPES,
};
static int __init init_kerberos_module(void)
i = 0;
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
- request->ssids[i].ssid_len = nla_len(attr);
- if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) {
+ if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
+ request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr));
i++;
}
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
tmp) {
- request->ssids[i].ssid_len = nla_len(attr);
- if (request->ssids[i].ssid_len >
- IEEE80211_MAX_SSID_LEN) {
+ if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
+ request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr),
nla_len(attr));
i++;
bitnr = bitnr & 0x1F;
replay_esn->bmp[nr] |= (1U << bitnr);
} else {
- nr = replay_esn->replay_window >> 5;
+ nr = (replay_esn->replay_window - 1) >> 5;
for (i = 0; i <= nr; i++)
replay_esn->bmp[i] = 0;
bitnr = bitnr & 0x1F;
replay_esn->bmp[nr] |= (1U << bitnr);
} else {
- nr = replay_esn->replay_window >> 5;
+ nr = (replay_esn->replay_window - 1) >> 5;
for (i = 0; i <= nr; i++)
replay_esn->bmp[i] = 0;
cmd_wrap = echo "\#include <asm-generic/$*.h>" >$@
all: $(patsubst %, $(obj)/%, $(generic-y))
+ @:
$(obj)/%.h:
$(call cmd,wrap)
WARN("LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr);
}
+# check for uses of printk_ratelimit
+ if ($line =~ /\bprintk_ratelimit\s*\(/) {
+ WARN("Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit\n" . $herecurr);
+ }
+
# printk should use KERN_* levels. Note that follow on printk's on the
# same line do not need a level, so we use the current block context
# to try and find and validate the current printk. In summary the current
--- /dev/null
+#!/bin/sh
+#
+# A depmod wrapper used by the toplevel Makefile
+
+if test $# -ne 2; then
+ echo "Usage: $0 /sbin/depmod <kernelrelease>" >&2
+ exit 1
+fi
+DEPMOD=$1
+KERNELRELEASE=$2
+
+if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then
+ echo "Warning: you may need to install module-init-tools" >&2
+ echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2
+ sleep 1
+fi
+
+if ! test -r System.map -a -x "$DEPMOD"; then
+ exit 0
+fi
+# older versions of depmod require the version string to start with three
+# numbers, so we cheat with a symlink here
+depmod_hack_needed=true
+mkdir -p .tmp_depmod/lib/modules/$KERNELRELEASE
+if "$DEPMOD" -b .tmp_depmod $KERNELRELEASE 2>/dev/null; then
+ if test -e .tmp_depmod/lib/modules/$KERNELRELEASE/modules.dep -o \
+ -e .tmp_depmod/lib/modules/$KERNELRELEASE/modules.dep.bin; then
+ depmod_hack_needed=false
+ fi
+fi
+if $depmod_hack_needed; then
+ symlink="$INSTALL_MOD_PATH/lib/modules/99.98.$KERNELRELEASE"
+ ln -s "$KERNELRELEASE" "$symlink"
+ KERNELRELEASE=99.98.$KERNELRELEASE
+fi
+
+set -- -ae -F System.map
+if test -n "$INSTALL_MOD_PATH"; then
+ set -- "$@" -b "$INSTALL_MOD_PATH"
+fi
+"$DEPMOD" "$@" "$KERNELRELEASE"
+ret=$?
+
+if $depmod_hack_needed; then
+ rm -f "$symlink"
+fi
+
+exit $ret
static int apparmor_task_setrlimit(struct task_struct *task,
unsigned int resource, struct rlimit *new_rlim)
{
- struct aa_profile *profile = aa_current_profile();
+ struct aa_profile *profile = __aa_current_profile();
int error = 0;
if (!unconfined(profile))
.subsys_id = devices_subsys_id,
};
-int devcgroup_inode_permission(struct inode *inode, int mask)
+int __devcgroup_inode_permission(struct inode *inode, int mask)
{
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- dev_t device = inode->i_rdev;
- if (!device)
- return 0;
- if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
- return 0;
-
rcu_read_lock();
dev_cgroup = task_devcgroup(current);
* This is called in context of freshly forked kthread before kernel_execve(),
* so we can simply install the desired session_keyring at this point.
*/
-static int umh_keys_init(struct subprocess_info *info)
+static int umh_keys_init(struct subprocess_info *info, struct cred *cred)
{
- struct cred *cred = (struct cred*)current_cred();
struct key *keyring = info->data;
return install_session_keyring_to_cred(cred, keyring);
unsigned flags)
{
struct inode_security_struct *isec;
- struct common_audit_data ad;
u32 sid;
validate_creds(cred);
sid = cred_sid(cred);
isec = inode->i_security;
- if (!adp) {
- adp = &ad;
- COMMON_AUDIT_DATA_INIT(&ad, INODE);
- ad.u.inode = inode;
- }
-
return avc_has_perm_flags(sid, isec->sid, isec->sclass, perms, adp, flags);
}
+static int inode_has_perm_noadp(const struct cred *cred,
+ struct inode *inode,
+ u32 perms,
+ unsigned flags)
+{
+ struct common_audit_data ad;
+
+ COMMON_AUDIT_DATA_INIT(&ad, INODE);
+ ad.u.inode = inode;
+ return inode_has_perm(cred, inode, perms, &ad, flags);
+}
+
/* Same as inode_has_perm, but pass explicit audit data containing
the dentry to help the auditing code to more easily generate the
pathname if needed. */
struct tty_file_private, list);
file = file_priv->file;
inode = file->f_path.dentry->d_inode;
- if (inode_has_perm(cred, inode,
- FILE__READ | FILE__WRITE, NULL, 0)) {
+ if (inode_has_perm_noadp(cred, inode,
+ FILE__READ | FILE__WRITE, 0)) {
drop_tty = 1;
}
}
* new inode label or new policy.
* This check is not redundant - do not remove.
*/
- return inode_has_perm(cred, inode, open_file_to_av(file), NULL, 0);
+ return inode_has_perm_noadp(cred, inode, open_file_to_av(file), 0);
}
/* task security operations */
#include <linux/audit.h>
#include <linux/uaccess.h>
#include <linux/kobject.h>
+#include <linux/ctype.h>
/* selinuxfs pseudo filesystem for exporting the security policy API.
Based on the proc code and the fs/nfsd/nfsctl.c code. */
return length;
}
+static inline int hexcode_to_int(int code) {
+ if (code == '\0' || !isxdigit(code))
+ return -1;
+ if (isdigit(code))
+ return code - '0';
+ return tolower(code) - 'a' + 10;
+}
+
static ssize_t sel_write_create(struct file *file, char *buf, size_t size)
{
char *scon = NULL, *tcon = NULL;
nargs = sscanf(buf, "%s %s %hu %s", scon, tcon, &tclass, namebuf);
if (nargs < 3 || nargs > 4)
goto out;
- if (nargs == 4)
+ if (nargs == 4) {
+ /*
+ * If and when the name of new object to be queried contains
+ * either whitespace or multibyte characters, they shall be
+ * encoded based on the percentage-encoding rule.
+ * If not encoded, the sscanf logic picks up only left-half
+ * of the supplied name; splitted by a whitespace unexpectedly.
+ */
+ char *r, *w;
+ int c1, c2;
+
+ r = w = namebuf;
+ do {
+ c1 = *r++;
+ if (c1 == '+')
+ c1 = ' ';
+ else if (c1 == '%') {
+ if ((c1 = hexcode_to_int(*r++)) < 0)
+ goto out;
+ if ((c2 = hexcode_to_int(*r++)) < 0)
+ goto out;
+ c1 = (c1 << 4) | c2;
+ }
+ *w++ = c1;
+ } while (c1 != '\0');
+
objname = namebuf;
+ }
length = security_context_to_sid(scon, strlen(scon) + 1, &ssid);
if (length)
__le32 buf[1];
int rc;
+ if (p->policyvers < POLICYDB_VERSION_FILENAME_TRANS)
+ return 0;
+
nel = 0;
rc = hashtab_map(p->filename_trans, hashtab_cnt, &nel);
if (rc)
}
if (need_dev) {
/* Get mount point or device file. */
- if (kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
+ if (!dev_name || kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
error = -ENOENT;
goto out;
}
else
return path;
}
-
-/* print file and line with a certain printk prefix */
-static int print_snd_pfx(unsigned int level, const char *path, int line,
- const char *format)
-{
- const char *file = sanity_file_name(path);
- char tmp[] = "<0>";
- const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
- int ret = 0;
-
- if (format[0] == '<' && format[2] == '>') {
- tmp[1] = format[1];
- pfx = tmp;
- ret = 1;
- }
- printk("%sALSA %s:%d: ", pfx, file, line);
- return ret;
-}
-#else
-#define print_snd_pfx(level, path, line, format) 0
#endif
#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
const char *format, ...)
{
va_list args;
-
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+ struct va_format vaf;
+ char verbose_fmt[] = KERN_DEFAULT "ALSA %s:%d %pV";
+#endif
+
#ifdef CONFIG_SND_DEBUG
if (debug < level)
return;
#endif
+
va_start(args, format);
- if (print_snd_pfx(level, path, line, format))
- format += 3; /* skip the printk level-prefix */
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+ vaf.fmt = format;
+ vaf.va = &args;
+ if (format[0] == '<' && format[2] == '>') {
+ memcpy(verbose_fmt, format, 3);
+ vaf.fmt = format + 3;
+ } else if (level)
+ memcpy(verbose_fmt, KERN_DEBUG, 3);
+ printk(verbose_fmt, sanity_file_name(path), line, &vaf);
+#else
vprintk(format, args);
+#endif
va_end(args);
}
EXPORT_SYMBOL_GPL(__snd_printk);
isight->packet_index = -1;
return;
}
+ fw_iso_context_queue_flush(isight->context);
if (++index >= QUEUE_LENGTH)
index = 0;
.ca0102_chip = 1,
.spk71 = 1,
.emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */
+ /* EMU0404 PCIe */
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40051102,
+ .driver = "Audigy2", .name = "E-mu 0404 PCIe [MAEM8984]",
+ .id = "EMU0404",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .spk71 = 1,
+ .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 PCIe ver_03 */
/* Note that all E-mu cards require kernel 2.6 or newer. */
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "SB Audigy 2 Value [Unknown]",
int snd_hda_attach_beep_device(struct hda_codec *codec, int nid);
void snd_hda_detach_beep_device(struct hda_codec *codec);
#else
-#define snd_hda_attach_beep_device(...) 0
-#define snd_hda_detach_beep_device(...)
+static inline int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
+{
+ return 0;
+}
+static inline void snd_hda_detach_beep_device(struct hda_codec *codec)
+{
+}
#endif
#endif
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO),
SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
+ SND_PCI_QUIRK(0x1b0a, 0x2092, "CyberpowerPC Gamer Xplorer N57001", CXT5066_AUTO),
{}
};
struct alc_spec *spec = codec->spec;
int on;
+ /* Control HP pins/amps depending on master_mute state;
+ * in general, HP pins/amps control should be enabled in all cases,
+ * but currently set only for master_mute, just to be safe
+ */
+ do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
+ spec->autocfg.hp_pins, spec->master_mute, true);
+
if (!spec->automute)
on = 0;
else
/* update HP, line and mono out pins according to the master switch */
static void alc260_hp_master_update(struct hda_codec *codec)
{
- struct alc_spec *spec = codec->spec;
-
- /* change HP pins */
- do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
- spec->autocfg.hp_pins, spec->master_mute, true);
update_speakers(codec);
}
* 0x1b = port replicator headphone out
*/
-#define ALC_HP_EVENT 0x37
+#define ALC_HP_EVENT ALC880_HP_EVENT
static const struct hda_verb alc262_fujitsu_unsol_verbs[] = {
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0f;
spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
+ spec->automute_mode = ALC_AUTOMUTE_AMP;
spec->ext_mic.pin = 0x18;
spec->ext_mic.mux_idx = 0;
spec->int_mic.pin = 0x12;
SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
ALC268_ACER_ASPIRE_ONE),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
+ SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO),
SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
"Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
/* almost compatible with toshiba but with optional digital outs;
knew->subdevice = HDA_SUBDEV_NID_FLAG | nid;
knew->private_value = nid;
- knew = via_clone_control(spec, &via_hp_mixer[1]);
- if (knew == NULL)
- return -ENOMEM;
- knew->subdevice = side_mute_channel(spec);
+ nid = side_mute_channel(spec);
+ if (nid) {
+ knew = via_clone_control(spec, &via_hp_mixer[1]);
+ if (knew == NULL)
+ return -ENOMEM;
+ knew->subdevice = nid;
+ }
return 0;
}
lola_setup_all_analog_gains(chip, PLAY, false); /* output, update */
}
-static int lola_parse_tree(struct lola *chip)
+static int __devinit lola_parse_tree(struct lola *chip)
{
unsigned int val;
int nid, err;
#define HDSPM_DMA_AREA_KILOBYTES (HDSPM_DMA_AREA_BYTES/1024)
/* revisions >= 230 indicate AES32 card */
+#define HDSPM_MADI_OLD_REV 207
#define HDSPM_MADI_REV 210
#define HDSPM_RAYDAT_REV 211
#define HDSPM_AIO_REV 212
/* if wordclock has synced freq and wordclock is valid */
if ((status2 & HDSPM_wcLock) != 0 &&
- (status & HDSPM_SelSyncRef0) == 0) {
+ (status2 & HDSPM_SelSyncRef0) == 0) {
rate_bits = status2 & HDSPM_wcFreqMask;
}
}
hmidi->pending = 0;
+ spin_unlock_irqrestore(&hmidi->lock, flags);
+ spin_lock_irqsave(&hmidi->hdspm->lock, flags);
hmidi->hdspm->control_register |= hmidi->ie;
hdspm_write(hmidi->hdspm, HDSPM_controlRegister,
hmidi->hdspm->control_register);
+ spin_unlock_irqrestore(&hmidi->hdspm->lock, flags);
- spin_unlock_irqrestore (&hmidi->lock, flags);
return snd_hdspm_midi_output_write (hmidi);
}
switch (hdspm->firmware_rev) {
case HDSPM_MADI_REV:
+ case HDSPM_MADI_OLD_REV:
hdspm->io_type = MADI;
hdspm->card_name = "RME MADI";
hdspm->midiPorts = 3;
if (IS_ERR(ssc))
pr_warn("Unable to parent ASoC SSC DAI on SSC: %ld\n",
PTR_ERR(ssc));
- else
+ else {
ssc_pdev->dev.parent = &(ssc->pdev->dev);
- ssc_free(ssc);
+ ssc_free(ssc);
+ }
ret = platform_device_add(ssc_pdev);
if (ret < 0)
.cpu_dai_name = "bfin-tdm.0",
.codec_dai_name = "ad1836-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad1836.0",
+ .codec_name = "spi0.4",
.ops = &bf5xx_ad1836_ops,
},
{
.cpu_dai_name = "bfin-tdm.1",
.codec_dai_name = "ad1836-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad1836.0",
+ .codec_name = "spi0.4",
.ops = &bf5xx_ad1836_ops,
},
};
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
- word_len = 3;
+ word_len = AD1836_WORD_LEN_16;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- word_len = 1;
+ word_len = AD1836_WORD_LEN_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
case SNDRV_PCM_FORMAT_S32_LE:
- word_len = 0;
+ word_len = AD1836_WORD_LEN_24;
break;
}
- snd_soc_update_bits(codec, AD1836_DAC_CTRL1,
- AD1836_DAC_WORD_LEN_MASK, word_len);
+ snd_soc_update_bits(codec, AD1836_DAC_CTRL1, AD1836_DAC_WORD_LEN_MASK,
+ word_len << AD1836_DAC_WORD_LEN_OFFSET);
- snd_soc_update_bits(codec, AD1836_ADC_CTRL2,
- AD1836_ADC_WORD_LEN_MASK, word_len);
+ snd_soc_update_bits(codec, AD1836_ADC_CTRL2, AD1836_ADC_WORD_LEN_MASK,
+ word_len << AD1836_ADC_WORD_OFFSET);
return 0;
}
#define AD1836_DAC_SERFMT_PCK256 (0x4 << 5)
#define AD1836_DAC_SERFMT_PCK128 (0x5 << 5)
#define AD1836_DAC_WORD_LEN_MASK 0x18
+#define AD1836_DAC_WORD_LEN_OFFSET 3
#define AD1836_DAC_CTRL2 1
#define AD1836_DACL1_MUTE 0
#define AD1836_ADCL2_MUTE 2
#define AD1836_ADCR2_MUTE 3
#define AD1836_ADC_WORD_LEN_MASK 0x30
+#define AD1836_ADC_WORD_OFFSET 5
#define AD1836_ADC_SERFMT_MASK (7 << 6)
#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
#define AD1836_NUM_REGS 16
+#define AD1836_WORD_LEN_24 0x0
+#define AD1836_WORD_LEN_20 0x1
+#define AD1836_WORD_LEN_16 0x2
+
#endif
#define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
+#define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
static struct snd_soc_dai_driver wm8804_dai = {
.name = "wm8804-spdif",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.ops = &wm8804_dai_ops,
int old;
/* Disable SYSCLK while we reconfigure */
- old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1);
+ old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1) & WM8915_SYSCLK_ENA;
snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1,
WM8915_SYSCLK_ENA, 0);
break;
case WM8915_FLL_MCLK2:
reg = 1;
+ break;
case WM8915_FLL_DACLRCLK1:
reg = 2;
break;
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_HPOUTL_PGA_ENA)
+ if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
reg_cache[WM8962_HPOUTL_VOLUME]);
/* ...otherwise the right. The VU is stereo. */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_HPOUTR_PGA_ENA)
+ if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
reg_cache[WM8962_HPOUTR_VOLUME]);
* should allocate a DMA buffer only for the streams that are valid.
*/
- if (dai->driver->playback.channels_min) {
+ if (pcm->streams[0].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[0].substream->dma_buffer);
}
}
- if (dai->driver->capture.channels_min) {
+ if (pcm->streams[1].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[1].substream->dma_buffer);
if (ret) {
- snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
dev_err(card->dev, "can't alloc capture dma buffer\n");
+ snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
return ret;
}
}
dma_private->ld_buf_phys = ld_buf_phys;
dma_private->dma_buf_phys = substream->dma_buffer.addr;
- ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "DMA", dma_private);
+ ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "fsldma-audio",
+ dma_private);
if (ret) {
dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
dma_private->irq, ret);
slave_config.direction = DMA_TO_DEVICE;
slave_config.dst_addr = dma_params->dma_addr;
slave_config.dst_addr_width = buswidth;
- slave_config.dst_maxburst = dma_params->burstsize * buswidth;
+ slave_config.dst_maxburst = dma_params->burstsize;
} else {
slave_config.direction = DMA_FROM_DEVICE;
slave_config.src_addr = dma_params->dma_addr;
slave_config.src_addr_width = buswidth;
- slave_config.src_maxburst = dma_params->burstsize * buswidth;
+ slave_config.src_maxburst = dma_params->burstsize;
}
ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
if (!i2s)
return false;
- active = readl(i2s->addr + I2SMOD);
+ active = readl(i2s->addr + I2SCON);
if (is_secondary(i2s))
active &= CON_TXSDMA_ACTIVE;
if (!i2s)
return false;
- active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE;
+ active = readl(i2s->addr + I2SCON) & CON_RXDMA_ACTIVE;
return active ? true : false;
}
static unsigned int snd_soc_get_cache_val(const void *base, unsigned int idx,
unsigned int word_size)
{
+ if (!base)
+ return -1;
+
switch (word_size) {
case 1: {
const u8 *cache = base;
}
/* create new dapm mixer control */
-static int dapm_new_mixer(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_mixer(struct snd_soc_dapm_widget *w)
{
+ struct snd_soc_dapm_context *dapm = w->dapm;
int i, ret = 0;
size_t name_len, prefix_len;
struct snd_soc_dapm_path *path;
}
/* create new dapm mux control */
-static int dapm_new_mux(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_mux(struct snd_soc_dapm_widget *w)
{
+ struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_dapm_path *path = NULL;
struct snd_kcontrol *kcontrol;
struct snd_card *card = dapm->card->snd_card;
}
/* create new dapm volume control */
-static int dapm_new_pga(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_pga(struct snd_soc_dapm_widget *w)
{
if (w->num_kcontrols)
dev_err(w->dapm->dev,
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
w->power_check = dapm_generic_check_power;
- dapm_new_mixer(dapm, w);
+ dapm_new_mixer(w);
break;
case snd_soc_dapm_mux:
case snd_soc_dapm_virt_mux:
case snd_soc_dapm_value_mux:
w->power_check = dapm_generic_check_power;
- dapm_new_mux(dapm, w);
+ dapm_new_mux(w);
break;
case snd_soc_dapm_adc:
case snd_soc_dapm_aif_out:
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
w->power_check = dapm_generic_check_power;
- dapm_new_pga(dapm, w);
+ dapm_new_pga(w);
break;
case snd_soc_dapm_input:
case snd_soc_dapm_output:
data = 0x00; /* resume ezusb cpu */
ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
if (ret < 0) {
- release_firmware(fw);
snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
"firmware %s: end message.\n", fwname);
return ret;
alsa_rt->hw = pcm_hw;
if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- if (rt->rate >= 0)
+ if (rt->rate < ARRAY_SIZE(rates))
alsa_rt->hw.rates = rates_alsaid[rt->rate];
alsa_rt->hw.channels_max = OUT_N_CHANNELS;
sub = &rt->playback;
} else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE) {
- if (rt->rate >= 0)
+ if (rt->rate < ARRAY_SIZE(rates))
alsa_rt->hw.rates = rates_alsaid[rt->rate];
alsa_rt->hw.channels_max = IN_N_CHANNELS;
sub = &rt->capture;
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
-LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive $(EXTLIBS)
+LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group
ALL_CFLAGS += $(BASIC_CFLAGS)
ALL_CFLAGS += $(ARCH_CFLAGS)
unsigned int nr_events[nsyscalls],
expected_nr_events[nsyscalls], i, j;
struct perf_evsel *evsels[nsyscalls], *evsel;
- int sample_size = perf_sample_size(attr.sample_type);
+ int sample_size = __perf_evsel__sample_size(attr.sample_type);
for (i = 0; i < nsyscalls; ++i) {
char name[64];
then
VN=$(echo "$VN" | sed -e 's/-/./g');
else
- eval $(grep '^VERSION[[:space:]]*=' ../../Makefile|tr -d ' ')
- eval $(grep '^PATCHLEVEL[[:space:]]*=' ../../Makefile|tr -d ' ')
- eval $(grep '^SUBLEVEL[[:space:]]*=' ../../Makefile|tr -d ' ')
- eval $(grep '^EXTRAVERSION[[:space:]]*=' ../../Makefile|tr -d ' ')
-
- VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
+ VN=$(MAKEFLAGS= make -sC ../.. kernelversion)
fi
VN=$(expr "$VN" : v*'\(.*\)')
return perf_event__names[id];
}
-int perf_sample_size(u64 sample_type)
-{
- u64 mask = sample_type & PERF_SAMPLE_MASK;
- int size = 0;
- int i;
-
- for (i = 0; i < 64; i++) {
- if (mask & (1ULL << i))
- size++;
- }
-
- size *= sizeof(u64);
-
- return size;
-}
-
static struct perf_sample synth_sample = {
.pid = -1,
.tid = -1,
struct ip_callchain *callchain;
};
-int perf_sample_size(u64 sample_type);
-
#define BUILD_ID_SIZE 20
struct build_id_event {
#include "evlist.h"
#include "evsel.h"
#include "util.h"
-#include "debug.h"
#include <sys/mman.h>
return evlist->mmap != NULL ? 0 : -ENOMEM;
}
-static int __perf_evlist__mmap(struct perf_evlist *evlist, struct perf_evsel *evsel,
+static int __perf_evlist__mmap(struct perf_evlist *evlist,
int idx, int prot, int mask, int fd)
{
evlist->mmap[idx].prev = 0;
evlist->mmap[idx].mask = mask;
evlist->mmap[idx].base = mmap(NULL, evlist->mmap_len, prot,
MAP_SHARED, fd, 0);
- if (evlist->mmap[idx].base == MAP_FAILED) {
- if (evlist->cpus->map[idx] == -1 && evsel->attr.inherit)
- ui__warning("Inherit is not allowed on per-task "
- "events using mmap.\n");
+ if (evlist->mmap[idx].base == MAP_FAILED)
return -1;
- }
perf_evlist__add_pollfd(evlist, fd);
return 0;
if (output == -1) {
output = fd;
- if (__perf_evlist__mmap(evlist, evsel, cpu,
+ if (__perf_evlist__mmap(evlist, cpu,
prot, mask, output) < 0)
goto out_unmap;
} else {
if (output == -1) {
output = fd;
- if (__perf_evlist__mmap(evlist, evsel, thread,
+ if (__perf_evlist__mmap(evlist, thread,
prot, mask, output) < 0)
goto out_unmap;
} else {
return 0;
}
-u64 perf_evlist__sample_type(struct perf_evlist *evlist)
+bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist)
{
- struct perf_evsel *pos;
- u64 type = 0;
-
- list_for_each_entry(pos, &evlist->entries, node) {
- if (!type)
- type = pos->attr.sample_type;
- else if (type != pos->attr.sample_type)
- die("non matching sample_type");
+ struct perf_evsel *pos, *first;
+
+ pos = first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
+ list_for_each_entry_continue(pos, &evlist->entries, node) {
+ if (first->attr.sample_type != pos->attr.sample_type)
+ return false;
}
- return type;
+ return true;
}
-bool perf_evlist__sample_id_all(const struct perf_evlist *evlist)
+u64 perf_evlist__sample_type(const struct perf_evlist *evlist)
+{
+ struct perf_evsel *first;
+
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
+ return first->attr.sample_type;
+}
+
+bool perf_evlist__valid_sample_id_all(const struct perf_evlist *evlist)
{
- bool value = false, first = true;
- struct perf_evsel *pos;
-
- list_for_each_entry(pos, &evlist->entries, node) {
- if (first) {
- value = pos->attr.sample_id_all;
- first = false;
- } else if (value != pos->attr.sample_id_all)
- die("non matching sample_id_all");
+ struct perf_evsel *pos, *first;
+
+ pos = first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
+ list_for_each_entry_continue(pos, &evlist->entries, node) {
+ if (first->attr.sample_id_all != pos->attr.sample_id_all)
+ return false;
}
- return value;
+ return true;
+}
+
+bool perf_evlist__sample_id_all(const struct perf_evlist *evlist)
+{
+ struct perf_evsel *first;
+
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
+ return first->attr.sample_id_all;
}
void perf_evlist__delete_maps(struct perf_evlist *evlist);
int perf_evlist__set_filters(struct perf_evlist *evlist);
-u64 perf_evlist__sample_type(struct perf_evlist *evlist);
-bool perf_evlist__sample_id_all(const struct perf_evlist *evlist);
+u64 perf_evlist__sample_type(const struct perf_evlist *evlist);
+bool perf_evlist__sample_id_all(const const struct perf_evlist *evlist);
+bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist);
+bool perf_evlist__valid_sample_id_all(const struct perf_evlist *evlist);
#endif /* __PERF_EVLIST_H */
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
+int __perf_evsel__sample_size(u64 sample_type)
+{
+ u64 mask = sample_type & PERF_SAMPLE_MASK;
+ int size = 0;
+ int i;
+
+ for (i = 0; i < 64; i++) {
+ if (mask & (1ULL << i))
+ size++;
+ }
+
+ size *= sizeof(u64);
+
+ return size;
+}
+
void perf_evsel__init(struct perf_evsel *evsel,
struct perf_event_attr *attr, int idx)
{
return __perf_evsel__read(evsel, ncpus, nthreads, true);
}
+int __perf_evsel__sample_size(u64 sample_type);
+
+static inline int perf_evsel__sample_size(struct perf_evsel *evsel)
+{
+ return __perf_evsel__sample_size(evsel->attr.sample_type);
+}
+
#endif /* __PERF_EVSEL_H */
struct perf_evlist *evlist = &pevlist->evlist;
union perf_event *event;
int sample_id_all = 1, cpu;
- static char *kwlist[] = {"sample_id_all", NULL, NULL};
+ static char *kwlist[] = {"cpu", "sample_id_all", NULL, NULL};
int err;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|i", kwlist,
first = list_entry(evlist->entries.next, struct perf_evsel, node);
err = perf_event__parse_sample(event, first->attr.sample_type,
- perf_sample_size(first->attr.sample_type),
+ perf_evsel__sample_size(first),
sample_id_all, &pevent->sample);
- if (err) {
- pr_err("Can't parse sample, err = %d\n", err);
- goto end;
- }
-
+ if (err)
+ return PyErr_Format(PyExc_OSError,
+ "perf: can't parse sample, err=%d", err);
return pyevent;
}
-end:
+
Py_INCREF(Py_None);
return Py_None;
}
goto out_close;
}
+ if (!perf_evlist__valid_sample_type(self->evlist)) {
+ pr_err("non matching sample_type");
+ goto out_close;
+ }
+
+ if (!perf_evlist__valid_sample_id_all(self->evlist)) {
+ pr_err("non matching sample_id_all");
+ goto out_close;
+ }
+
self->size = input_stat.st_size;
return 0;
void perf_session__update_sample_type(struct perf_session *self)
{
self->sample_type = perf_evlist__sample_type(self->evlist);
- self->sample_size = perf_sample_size(self->sample_type);
+ self->sample_size = __perf_evsel__sample_size(self->sample_type);
self->sample_id_all = perf_evlist__sample_id_all(self->evlist);
perf_session__id_header_size(self);
}
{ "TASKLET_SOFTIRQ", 6 },
{ "SCHED_SOFTIRQ", 7 },
{ "HRTIMER_SOFTIRQ", 8 },
+ { "RCU_SOFTIRQ", 9 },
{ "HRTIMER_NORESTART", 0 },
{ "HRTIMER_RESTART", 1 },
if (!kvm->buses[i])
goto out_err;
}
- spin_lock_init(&kvm->mmu_lock);
-
- r = kvm_init_mmu_notifier(kvm);
- if (r)
- goto out_err;
+ spin_lock_init(&kvm->mmu_lock);
kvm->mm = current->mm;
atomic_inc(&kvm->mm->mm_count);
kvm_eventfd_init(kvm);
mutex_init(&kvm->irq_lock);
mutex_init(&kvm->slots_lock);
atomic_set(&kvm->users_count, 1);
+
+ r = kvm_init_mmu_notifier(kvm);
+ if (r)
+ goto out_err;
+
raw_spin_lock(&kvm_lock);
list_add(&kvm->vm_list, &vm_list);
raw_spin_unlock(&kvm_lock);
/* We can read the guest memory with __xxx_user() later on. */
if (user_alloc &&
((mem->userspace_addr & (PAGE_SIZE - 1)) ||
- !access_ok(VERIFY_WRITE, mem->userspace_addr, mem->memory_size)))
+ !access_ok(VERIFY_WRITE,
+ (void __user *)(unsigned long)mem->userspace_addr,
+ mem->memory_size)))
goto out;
if (mem->slot >= KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS)
goto out;
git.openpandora.org / pandora-kernel.git / commitdiff