What: /sys/o2cb symlink
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: ocfs2-devel@oss.oracle.com
Description: This is a symlink: /sys/o2cb to /sys/fs/o2cb. The symlink is
removed when new versions of ocfs2-tools which know to look
What: /sys/bus/bcma/devices/.../manuf
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
Each BCMA core has it's manufacturer id. See
What: /sys/bus/bcma/devices/.../id
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
There are a few types of BCMA cores, they can be identified by
What: /sys/bus/bcma/devices/.../rev
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
BCMA cores of the same type can still slightly differ depending
What: /sys/bus/bcma/devices/.../class
Date: May 2011
-KernelVersion: 2.6.40
+KernelVersion: 3.0
Contact: Rafał Miłecki <zajec5@gmail.com>
Description:
Each BCMA core is identified by few fields, including class it
What: /sys/class/backlight/<backlight>/l3_office_max
What: /sys/class/backlight/<backlight>/l4_indoor_max
What: /sys/class/backlight/<backlight>/l5_dark_max
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the maximum brightness for <ambient light zone>
What: /sys/class/backlight/<backlight>/l3_office_dim
What: /sys/class/backlight/<backlight>/l4_indoor_dim
What: /sys/class/backlight/<backlight>/l5_dark_dim
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the dim brightness for <ambient light zone>
this <ambient light zone>.
What: /sys/class/backlight/<backlight>/ambient_light_level
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get conversion value of the light sensor.
8000 (max ambient brightness)
What: /sys/class/backlight/<backlight>/ambient_light_zone
-Date: Mai 2011
-KernelVersion: 2.6.40
+Date: May 2011
+KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get/Set current ambient light zone. Reading returns
transition_latency * 100
Or by kernel restrictions:
If CONFIG_NO_HZ is set, the limit is 10ms fixed.
-If CONFIG_NO_HZ is not set or no_hz=off boot parameter is used, the
+If CONFIG_NO_HZ is not set or nohz=off boot parameter is used, the
limits depend on the CONFIG_HZ option:
HZ=1000: min=20000us (20ms)
HZ=250: min=80000us (80ms)
#include <linux/stddef.h>
#include <linux/list.h>
#include <linux/timer.h>
-#include <linux/version.h>
#include <linux/io.h>
#include <mach/hardware.h>
* consent.
*****************************************************************************/
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/module.h>
#include <csp/tmrHw.h>
timer0_load = (rate / TICKS_PER_SEC);
__raw_writel(timer0_load, REG_TICR0);
- val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
__raw_writel(val, REG_TCSR0);
}
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
static DEFINE_SUBCLK(rmii, 2);
static DEFINE_CLK(usbd, 8);
static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(g2d, 10);
static DEFINE_CLK(pwm, 18);
static DEFINE_CLK(ps2, 24);
static DEFINE_CLK(kpi, 25);
}
/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
void *base;
buf_size = PAGE_SIZE * (diag204_buf_pages + 1) + sizeof(d204->hdr);
- base = vmalloc(buf_size);
+ base = vzalloc(buf_size);
if (!base)
return -ENOMEM;
- memset(base, 0, buf_size);
d204 = page_align_ptr(base + sizeof(d204->hdr)) - sizeof(d204->hdr);
rc = diag204_do_store(d204->buf, diag204_buf_pages);
if (rc) {
/*
- * switch_to(x,yn) should switch tasks from x to y.
+ * switch_to(x,y) should switch tasks from x to y.
*
* We fsave/fwait so that an exception goes off at the right time
* (as a call from the fsave or fwait in effect) rather than to
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <linux/version.h>
#include <linux/kallsyms.h>
#include <asm/pgtable.h>
#include <linux/mmiotrace.h>
size = sizeof(struct vc_map *) * card->tct_size;
IPRINTK("%s: allocate %d byte for VC map.\n", card->name, size);
- if (NULL == (card->vcs = vmalloc(size))) {
+ card->vcs = vzalloc(size);
+ if (!card->vcs) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
}
- memset(card->vcs, 0, size);
size = sizeof(struct vc_map *) * card->scd_size;
IPRINTK("%s: allocate %d byte for SCD to VC mapping.\n",
card->name, size);
- if (NULL == (card->scd2vc = vmalloc(size))) {
+ card->scd2vc = vzalloc(size);
+ if (!card->scd2vc) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
}
- memset(card->scd2vc, 0, size);
size = sizeof(struct tst_info) * (card->tst_size - 2);
IPRINTK("%s: allocate %d byte for TST to VC mapping.\n",
card->name, size);
- if (NULL == (card->soft_tst = vmalloc(size))) {
+ card->soft_tst = vmalloc(size);
+ if (!card->soft_tst) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
return (lanai->vccs == NULL) ? -ENOMEM : 0;
#else
int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
- lanai->vccs = (struct lanai_vcc **) vmalloc(bytes);
+ lanai->vccs = vzalloc(bytes);
if (unlikely(lanai->vccs == NULL))
return -ENOMEM;
- memset(lanai->vccs, 0, bytes);
return 0;
#endif
}
* thread. As we have no disk yet, we are not in the IO path,
* not even the IO path of the peer. */
bytes = sizeof(struct page *)*want;
- new_pages = kmalloc(bytes, GFP_KERNEL);
+ new_pages = kzalloc(bytes, GFP_KERNEL);
if (!new_pages) {
- new_pages = vmalloc(bytes);
+ new_pages = vzalloc(bytes);
if (!new_pages)
return NULL;
vmalloced = 1;
}
- memset(new_pages, 0, bytes);
if (want >= have) {
for (i = 0; i < have; i++)
new_pages[i] = old_pages[i];
#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#define NL_INT64(pn,pr,member) __u64 member;
#define NL_BIT(pn,pr,member) unsigned member:1;
#define NL_STRING(pn,pr,member,len) unsigned char member[len]; int member ## _len;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
struct drbd_backing_dev {
struct block_device *backing_bdev;
arg->member ## _len = dlen; \
memcpy(arg->member, tags, min_t(size_t, dlen, len)); \
break;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
/* Generate the struct to tag_list functions */
#define NL_PACKET(name, number, fields) \
put_unaligned(arg->member ## _len, tags++); \
memcpy(tags, arg->member, arg->member ## _len); \
tags = (unsigned short *)((char *)tags + arg->member ## _len);
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
void drbd_bcast_ev_helper(struct drbd_conf *mdev, char *helper_name);
void drbd_nl_send_reply(struct cn_msg *, int);
const char *buf,
size_t count);
static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
- struct rbd_snap *snap);;
+ struct rbd_snap *snap);
static struct rbd_device *dev_to_rbd(struct device *dev)
#ifndef __XEN_BLKIF__BACKEND__COMMON_H__
#define __XEN_BLKIF__BACKEND__COMMON_H__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
}
got_gatt = 1;
- bridge->key_list = vmalloc(PAGE_SIZE * 4);
+ bridge->key_list = vzalloc(PAGE_SIZE * 4);
if (bridge->key_list == NULL) {
dev_err(&bridge->dev->dev,
"can't allocate memory for key lists\n");
got_keylist = 1;
/* FIXME vmalloc'd memory not guaranteed contiguous */
- memset(bridge->key_list, 0, PAGE_SIZE * 4);
if (bridge->driver->configure()) {
dev_err(&bridge->dev->dev, "error configuring host chipset\n");
max_raw_minors = MAX_RAW_MINORS;
}
- raw_devices = vmalloc(sizeof(struct raw_device_data) * max_raw_minors);
+ raw_devices = vzalloc(sizeof(struct raw_device_data) * max_raw_minors);
if (!raw_devices) {
printk(KERN_ERR "Not enough memory for raw device structures\n");
ret = -ENOMEM;
goto error;
}
- memset(raw_devices, 0, sizeof(struct raw_device_data) * max_raw_minors);
ret = register_chrdev_region(dev, max_raw_minors, "raw");
if (ret)
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
+#include <linux/ratelimit.h>
#include <asm/current.h>
#include <asm/system.h>
spin_unlock_irq(&rtc_lock);
- if (printk_ratelimit()) {
- printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
- freq);
- }
+ printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
+ freq);
/* Now we have new data */
wake_up_interruptible(&rtc_wait);
dbs_tuners_ins.down_differential =
MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
- * In no_hz/micro accounting case we set the minimum frequency
+ * In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
* timer might skip some samples if idle/sleeping as needed.
*/
scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
else
scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);;
+ rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);
} else
WREG32(rdev->fence_drv.scratch_reg, seq);
}
int tx_limit, rx_limit;
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
- u8 *buf = dev->tx_buf;;
+ u8 *buf = dev->tx_buf;
intr_mask = DW_IC_INTR_DEFAULT_MASK;
int i;
char tmprev[50];
- if (!(dev = vmalloc(sizeof(isdn_dev)))) {
+ dev = vzalloc(sizeof(isdn_dev));
+ if (!dev) {
printk(KERN_WARNING "isdn: Could not allocate device-struct.\n");
return -EIO;
}
- memset((char *) dev, 0, sizeof(isdn_dev));
init_timer(&dev->timer);
dev->timer.function = isdn_timer_funct;
spin_lock_init(&dev->lock);
if (crq->protocol != ISDN_P_B_L2DSP
&& crq->protocol != ISDN_P_B_L2DSPHDLC)
return -EPROTONOSUPPORT;
- ndsp = vmalloc(sizeof(struct dsp));
+ ndsp = vzalloc(sizeof(struct dsp));
if (!ndsp) {
printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
return -ENOMEM;
}
- memset(ndsp, 0, sizeof(struct dsp));
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
return 0;
/* alloc conversion tables */
- table_com = vmalloc(65536);
- table_dec = vmalloc(512);
+ table_com = vzalloc(65536);
+ table_dec = vzalloc(512);
if (!table_com || !table_dec) {
l1oip_4bit_free();
return -ENOMEM;
}
- memset(table_com, 0, 65536);
- memset(table_dec, 0, 512);
/* generate compression table */
i1 = 0;
while (i1 < 256) {
static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv,
struct v4l2_modulator *mod)
{
- struct fmdev *fmdev = video_drvdata(file);;
+ struct fmdev *fmdev = video_drvdata(file);
if (mod->index != 0)
return -EINVAL;
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31)
#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31)
#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31)
#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31)
#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31)
#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
(CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
bytes_per_frag -= LIBIPW_FCS_LEN;
- /* Each fragment may need to have room for encryptiong
+ /* Each fragment may need to have room for encryption
* pre/postfix */
if (host_encrypt)
bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
* global variable declaration.
*/
#ifndef _LBS_DEB_DEFS_H_
-#define _LBS_DEB_EFS_H_
+#define _LBS_DEB_DEFS_H_
#ifndef DRV_NAME
#define DRV_NAME "libertas_tf"
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct sk_buff *skb = NULL;
struct ieee80211_tx_info *info = NULL;
- int tid; /* should be int */
+ int tid;
if (!rtlpriv->rtlhal.earlymode_enable)
return;
rtl_init_rx_config(hw);
- /*should after adapter start and interrupt enable. */
+ /*should be after adapter start and interrupt enable. */
set_hal_start(rtlhal);
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
u8 RFInProgressTimeOut = 0;
/*
- *should before disable interrrupt&adapter
+ *should be before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
return -EINVAL;
if (user_len > 65536)
user_len = 65536;
- buf = vmalloc (user_len + 1); /* maybe better use the stack? */
+ buf = vzalloc(user_len + 1); /* maybe better use the stack? */
if (buf == NULL)
return -ENOMEM;
- memset(buf, 0, user_len + 1);
if (strncpy_from_user (buf, user_buf, user_len) < 0) {
rc = -EFAULT;
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/completion.h>
#include <linux/time.h>
#include <linux/interrupt.h>
*
*/
-#include "linux/pci.h"
+#include <linux/pci.h>
#include "aic94xx.h"
#include "aic94xx_reg.h"
#include "aic94xx_reg_def.h"
#define __BFAD_DRV_H__
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <scsi/scsi_host.h>
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <scsi/scsi_host.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/spinlock.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
__func__,
event_code);
- return SCI_FAILURE;;
+ return SCI_FAILURE;
}
return SCI_SUCCESS;
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
* USA.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
* USA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
* USA.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
* USA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/sas_ata.h>
-#include <linux/version.h>
#include "mv_defs.h"
#define DRV_NAME "mvsas"
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/hdreg.h>
-#include <linux/version.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/irq.h>
#ifndef _PMCRAID_H
#define _PMCRAID_H
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/completion.h>
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/blktrace_api.h>
#include <linux/mutex.h>
+#include <linux/ratelimit.h>
#include "scsi.h"
#include <scsi/scsi_dbg.h>
*/
if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) {
static char cmd[TASK_COMM_LEN];
- if (strcmp(current->comm, cmd) && printk_ratelimit()) {
- printk(KERN_WARNING
- "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
- "guessing data in;\n "
- "program %s not setting count and/or reply_len properly\n",
- old_hdr.reply_len - (int)SZ_SG_HEADER,
- input_size, (unsigned int) cmnd[0],
- current->comm);
+ if (strcmp(current->comm, cmd)) {
+ printk_ratelimited(KERN_WARNING
+ "sg_write: data in/out %d/%d bytes "
+ "for SCSI command 0x%x-- guessing "
+ "data in;\n program %s not setting "
+ "count and/or reply_len properly\n",
+ old_hdr.reply_len - (int)SZ_SG_HEADER,
+ input_size, (unsigned int) cmnd[0],
+ current->comm);
strcpy(cmd, current->comm);
}
}
static int __devexit adt7316_i2c_remove(struct i2c_client *client)
{
- return adt7316_remove(&client->dev);;
+ return adt7316_remove(&client->dev);
}
static const struct i2c_device_id adt7316_i2c_id[] = {
((addr - 3) << ADD_SHIFT) |
((regval >> 0) & 0xFF));
- return spi_sync(st->spi, &st->freq_msg);;
+ return spi_sync(st->spi, &st->freq_msg);
}
static int ad9832_write_phase(struct ad9832_state *st,
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/configfs.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/init.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/timer.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/timer.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/list.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/timer.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/string.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/proc_fs.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/list.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/net.h>
#include <linux/delay.h>
#include <linux/string.h>
*
******************************************************************************/
-#include <linux/version.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <generated/utsrelease.h>
#include <linux/utsname.h>
#include <linux/init.h>
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
handle_port_change(dev);
}
- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
} else {
/* Write dQH next pointer and terminate bit to 0 */
dqh->next_dtd_ptr = req->head->td_dma
- & EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
+ & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
dqh->size_ioc_int_sts = 0;
/* Ensure that updates to the QH will occur before priming. */
}
}
done:
- return retval;;
+ return retval;
}
static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
- * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+ * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
* both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
* only indicates a change in the reset state).
*/
#include <linux/usb.h> /* For usb_endpoint_* */
#include <linux/usb/gadget.h>
#include <linux/videodev2.h>
+#include <linux/version.h>
#include <media/v4l2-fh.h>
#include "uvc_queue.h"
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/mutex.h>
-#include <linux/version.h>
#include <linux/videodev2.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(tty, mos7720_port,
(unsigned int __user *)arg);
- return 0;
/* FIXME: These should be using the mode methods */
case TIOCMBIS:
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return mos7840_get_lsr_info(tty, argp);
- return 0;
case TIOCGSERIAL:
dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#ifndef __UWB_INTERNAL_H__
#define __UWB_INTERNAL_H__
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/uwb.h>
#define CODA_ALLOC(ptr, cast, size) do { \
if (size < PAGE_SIZE) \
- ptr = kmalloc((unsigned long) size, GFP_KERNEL); \
+ ptr = kzalloc((unsigned long) size, GFP_KERNEL); \
else \
- ptr = (cast)vmalloc((unsigned long) size); \
+ ptr = (cast)vzalloc((unsigned long) size); \
if (!ptr) \
printk("kernel malloc returns 0 at %s:%d\n", __FILE__, __LINE__); \
- else memset( ptr, 0, size ); \
} while (0)
.llseek = noop_llseek,
};
-/* Fast test to see if the file is an evenpoll file */
+/* Fast test to see if the file is an eventpoll file */
static inline int is_file_epoll(struct file *f)
{
return f->f_op == &eventpoll_fops;
for (i = 0; i < JOURNAL_NUM_BITMAPS; i++) {
jb = jb_array + i;
jb->journal_list = NULL;
- jb->bitmaps = vmalloc(mem);
+ jb->bitmaps = vzalloc(mem);
if (!jb->bitmaps) {
reiserfs_warning(sb, "clm-2000", "unable to "
"allocate bitmaps for journal lists");
failed = 1;
break;
}
- memset(jb->bitmaps, 0, mem);
}
if (failed) {
free_list_bitmaps(sb, jb_array);
if (num_cnodes <= 0) {
return NULL;
}
- head = vmalloc(num_cnodes * sizeof(struct reiserfs_journal_cnode));
+ head = vzalloc(num_cnodes * sizeof(struct reiserfs_journal_cnode));
if (!head) {
return NULL;
}
- memset(head, 0, num_cnodes * sizeof(struct reiserfs_journal_cnode));
head[0].prev = NULL;
head[0].next = head + 1;
for (i = 1; i < num_cnodes; i++) {
* dependency inversion warnings.
*/
reiserfs_write_unlock(sb);
- journal = SB_JOURNAL(sb) = vmalloc(sizeof(struct reiserfs_journal));
+ journal = SB_JOURNAL(sb) = vzalloc(sizeof(struct reiserfs_journal));
if (!journal) {
reiserfs_warning(sb, "journal-1256",
"unable to get memory for journal structure");
reiserfs_write_lock(sb);
return 1;
}
- memset(journal, 0, sizeof(struct reiserfs_journal));
INIT_LIST_HEAD(&journal->j_bitmap_nodes);
INIT_LIST_HEAD(&journal->j_prealloc_list);
INIT_LIST_HEAD(&journal->j_working_list);
/* allocate additional bitmap blocks, reallocate array of bitmap
* block pointers */
bitmap =
- vmalloc(sizeof(struct reiserfs_bitmap_info) * bmap_nr_new);
+ vzalloc(sizeof(struct reiserfs_bitmap_info) * bmap_nr_new);
if (!bitmap) {
/* Journal bitmaps are still supersized, but the memory isn't
* leaked, so I guess it's ok */
printk("reiserfs_resize: unable to allocate memory.\n");
return -ENOMEM;
}
- memset(bitmap, 0,
- sizeof(struct reiserfs_bitmap_info) * bmap_nr_new);
for (i = 0; i < bmap_nr; i++)
bitmap[i] = old_bitmap[i];
static inline void *kmem_zalloc_large(size_t size)
{
- void *ptr;
-
- ptr = vmalloc(size);
- if (ptr)
- memset(ptr, 0, size);
- return ptr;
+ return vzalloc(size);
}
static inline void kmem_free_large(void *ptr)
{
#include <linux/net.h>
#include <linux/radix-tree.h>
#include <linux/uio.h>
-#include <linux/version.h>
#include <linux/workqueue.h>
#include "types.h"
#define NL_STRING(pn, pr, member, len) \
unsigned char member[len]; int member ## _len; \
int tag_and_len ## member;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
/* declare tag-list-sizes */
static const int tag_list_sizes[] = {
*/
#include <linux/types.h>
-#include <linux/version.h>
/* Enumeration of image sizes */
#define PSZ_SQCIF 0x00
struct async_entry *entry =
container_of(work, struct async_entry, work);
unsigned long flags;
- ktime_t calltime, delta, rettime;
+ ktime_t uninitialized_var(calltime), delta, rettime;
/* 1) move self to the running queue */
spin_lock_irqsave(&async_lock, flags);
void async_synchronize_cookie_domain(async_cookie_t cookie,
struct list_head *running)
{
- ktime_t starttime, delta, endtime;
+ ktime_t uninitialized_var(starttime), delta, endtime;
if (initcall_debug && system_state == SYSTEM_BOOTING) {
printk(KERN_DEBUG "async_waiting @ %i\n", task_pid_nr(current));
{
struct task_struct *new_owner;
struct futex_pi_state *pi_state = this->pi_state;
- u32 curval, newval;
+ u32 uninitialized_var(curval), newval;
if (!pi_state)
return -EINVAL;
static int unlock_futex_pi(u32 __user *uaddr, u32 uval)
{
- u32 oldval;
+ u32 uninitialized_var(oldval);
/*
* There is no waiter, so we unlock the futex. The owner died
u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS;
struct futex_pi_state *pi_state = q->pi_state;
struct task_struct *oldowner = pi_state->owner;
- u32 uval, curval, newval;
+ u32 uval, uninitialized_var(curval), newval;
int ret;
/* Owner died? */
*
* Returns:
* 0 - uaddr contains val and hb has been locked
- * <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlcoked
+ * <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked
*/
static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags,
struct futex_q *q, struct futex_hash_bucket **hb)
*/
int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi)
{
- u32 uval, nval, mval;
+ u32 uval, uninitialized_var(nval), mval;
retry:
if (get_user(uval, uaddr))
help
The section mismatch analysis checks if there are illegal
references from one section to another section.
- Linux will during link or during runtime drop some sections
- and any use of code/data previously in these sections will
+ During linktime or runtime, some sections are dropped;
+ any use of code/data previously in these sections would
most likely result in an oops.
- In the code functions and variables are annotated with
- __init, __devinit etc. (see full list in include/linux/init.h)
+ In the code, functions and variables are annotated with
+ __init, __devinit, etc. (see the full list in include/linux/init.h),
which results in the code/data being placed in specific sections.
- The section mismatch analysis is always done after a full
- kernel build but enabling this option will in addition
- do the following:
- - Add the option -fno-inline-functions-called-once to gcc
- When inlining a function annotated __init in a non-init
- function we would lose the section information and thus
+ The section mismatch analysis is always performed after a full
+ kernel build, and enabling this option causes the following
+ additional steps to occur:
+ - Add the option -fno-inline-functions-called-once to gcc commands.
+ When inlining a function annotated with __init in a non-init
+ function, we would lose the section information and thus
the analysis would not catch the illegal reference.
- This option tells gcc to inline less but will also
- result in a larger kernel.
- - Run the section mismatch analysis for each module/built-in.o
- When we run the section mismatch analysis on vmlinux.o we
+ This option tells gcc to inline less (but it does result in
+ a larger kernel).
+ - Run the section mismatch analysis for each module/built-in.o file.
+ When we run the section mismatch analysis on vmlinux.o, we
lose valueble information about where the mismatch was
introduced.
Running the analysis for each module/built-in.o file
- will tell where the mismatch happens much closer to the
- source. The drawback is that we will report the same
- mismatch at least twice.
- - Enable verbose reporting from modpost to help solving
- the section mismatches reported.
+ tells where the mismatch happens much closer to the
+ source. The drawback is that the same mismatch is
+ reported at least twice.
+ - Enable verbose reporting from modpost in order to help resolve
+ the section mismatches that are reported.
config DEBUG_KERNEL
bool "Kernel debugging"
#
# Select this config option from the architecture Kconfig, if it
-# it is preferred to always offer frame pointers as a config
+# is preferred to always offer frame pointers as a config
# option on the architecture (regardless of KERNEL_DEBUG):
#
config ARCH_WANT_FRAME_POINTERS
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kallsyms.h>
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/proc_fs.h>
* and go back to the idr_pre_get() call. If the idr is full, it will
* return %-ENOSPC.
*
- * @id returns a value in the range %0 ... %0x7fffffff.
+ * @p_id returns a value in the range %0 ... %0x7fffffff.
*/
int ida_get_new(struct ida *ida, int *p_id)
{
length = DIV_ROUND_UP(max_pages, SC_PER_PAGE);
array_size = length * sizeof(void *);
- array = vmalloc(array_size);
+ array = vzalloc(array_size);
if (!array)
goto nomem;
- memset(array, 0, array_size);
ctrl = &swap_cgroup_ctrl[type];
mutex_lock(&swap_cgroup_mutex);
ctrl->length = length;
if (sc->reclaim_mode & RECLAIM_MODE_SINGLE)
return false;
- /* If we have relaimed everything on the isolated list, no stall */
+ /* If we have reclaimed everything on the isolated list, no stall */
if (nr_freed == nr_taken)
return false;
size = sizeof(void **) * nr_cpu_ids;
if (size > PAGE_SIZE)
- i->jumpstack = vmalloc(size);
+ i->jumpstack = vzalloc(size);
else
- i->jumpstack = kmalloc(size, GFP_KERNEL);
+ i->jumpstack = kzalloc(size, GFP_KERNEL);
if (i->jumpstack == NULL)
return -ENOMEM;
- memset(i->jumpstack, 0, size);
i->stacksize *= xt_jumpstack_multiplier;
size = sizeof(void *) * i->stacksize;
goto out;
}
- ic->i_sends = vmalloc_node(ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work),
+ ic->i_sends = vzalloc_node(ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work),
ibdev_to_node(dev));
if (!ic->i_sends) {
ret = -ENOMEM;
rdsdebug("send allocation failed\n");
goto out;
}
- memset(ic->i_sends, 0, ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work));
- ic->i_recvs = vmalloc_node(ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work),
+ ic->i_recvs = vzalloc_node(ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work),
ibdev_to_node(dev));
if (!ic->i_recvs) {
ret = -ENOMEM;
rdsdebug("recv allocation failed\n");
goto out;
}
- memset(ic->i_recvs, 0, ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work));
rds_ib_recv_init_ack(ic);
}
}
if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
- my $herectx = $here . "\n";;
+ my $herectx = $here . "\n";
my $cnt = statement_rawlines($block);
for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";;
+ $herectx .= raw_line($linenr, $n) . "\n";
}
WARN("BRACES",
git.openpandora.org / pandora-kernel.git / commitdiff