net: Add support for ADI SC5xx SoCs with DWC QoS ethernet

The ADI SC598 includes a Designware QoS 5.20a IP block. This
commit adds support for using the existing ethernet QoS driver
with the SC598 SoC.

Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index f2638be..2c4dc8b 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -635,6 +635,7 @@ F:  drivers/clk/adi/
 F:     drivers/gpio/adp5588_gpio.c
 F:     drivers/gpio/gpio-adi-adsp.c
 F:     drivers/i2c/adi_i2c.c
+F:     drivers/net/dwc_eth_qos_adi.c
 F:     drivers/pinctrl/pinctrl-adi-adsp.c
 F:     drivers/serial/serial_adi_uart4.c
 F:     drivers/timer/adi_sc5xx_timer.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1563404..8dc5f48 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -237,6 +237,13 @@ config DWC_ETH_QOS
          Of Service) IP block. The IP supports many options for bus type,
          clocking/reset structure, and feature list.
 
+config DWC_ETH_QOS_ADI
+       bool "Synopsys DWC Ethernet QOS device support for ADI SC59x-64 parts"
+       depends on DWC_ETH_QOS
+       help
+               The Synopsis Designware Ethernet QoS IP block with the specific
+               configuration used in the ADI ADSP-SC59X 64 bit SoCs
+
 config DWC_ETH_QOS_IMX
        bool "Synopsys DWC Ethernet QOS device support for IMX"
        depends on DWC_ETH_QOS

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 80d7021..d919d43 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_DM_ETH_PHY) += eth-phy-uclass.o
 obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
 obj-$(CONFIG_DSA_SANDBOX) += dsa_sandbox.o
 obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
+obj-$(CONFIG_DWC_ETH_QOS_ADI) += dwc_eth_qos_adi.o
 obj-$(CONFIG_DWC_ETH_QOS_IMX) += dwc_eth_qos_imx.o
 obj-$(CONFIG_DWC_ETH_QOS_INTEL) += dwc_eth_qos_intel.o
 obj-$(CONFIG_DWC_ETH_QOS_ROCKCHIP) += dwc_eth_qos_rockchip.o

diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 2279481..b4ec361 100644 (file)
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -1631,6 +1631,12 @@ static const struct udevice_id eqos_ids[] = {
                .compatible = "starfive,jh7110-dwmac",
                .data = (ulong)&eqos_jh7110_config
        },
+#endif
+#if IS_ENABLED(CONFIG_DWC_ETH_QOS_ADI)
+       {
+               .compatible = "adi,sc59x-dwmac-eqos",
+               .data = (ulong)&eqos_adi_config
+       },
 #endif
        { }
 };

diff --git a/drivers/net/dwc_eth_qos.h b/drivers/net/dwc_eth_qos.h
index 123f98d..403e820 100644 (file)
--- a/drivers/net/dwc_eth_qos.h
+++ b/drivers/net/dwc_eth_qos.h
@@ -87,6 +87,7 @@ struct eqos_mac_regs {
 #define EQOS_MAC_MDIO_ADDRESS_CR_MASK                  GENMASK(11, 8)
 #define EQOS_MAC_MDIO_ADDRESS_CR_100_150               1
 #define EQOS_MAC_MDIO_ADDRESS_CR_20_35                 2
+#define EQOS_MAC_MDIO_ADDRESS_CR_150_250               4
 #define EQOS_MAC_MDIO_ADDRESS_CR_250_300               5
 #define EQOS_MAC_MDIO_ADDRESS_SKAP                     BIT(4)
 #define EQOS_MAC_MDIO_ADDRESS_GOC_MASK                 GENMASK(3, 2)
@@ -301,3 +302,4 @@ extern struct eqos_config eqos_qcom_config;
 extern struct eqos_config eqos_stm32mp13_config;
 extern struct eqos_config eqos_stm32mp15_config;
 extern struct eqos_config eqos_jh7110_config;
+extern struct eqos_config eqos_adi_config;

diff --git a/drivers/net/dwc_eth_qos_adi.c b/drivers/net/dwc_eth_qos_adi.c
new file mode 100644 (file)
index 0000000..0e6a901
--- /dev/null
+++ b/drivers/net/dwc_eth_qos_adi.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ *
+ * Written and/or maintained by Timesys Corporation
+ *
+ * Author: Greg Malysa <greg.malysa@timesys.com>
+ * Additional Contact: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <net.h>
+#include <phy.h>
+#include <reset.h>
+#include <linux/io.h>
+
+#include <asm/arch-adi/sc5xx/sc5xx.h>
+
+#include "dwc_eth_qos.h"
+
+static int eqos_start_resets_adi(struct udevice *dev)
+{
+       struct eqos_priv *eqos = dev_get_priv(dev);
+
+       /*
+        * Settings need to latch with the DMA reset below. Currently only
+        * rgmii is supported but other phy interfaces may be supported in
+        * the future
+        */
+       sc5xx_enable_rgmii();
+       setbits_32(&eqos->dma_regs->mode, EQOS_DMA_MODE_SWR);
+
+       return 0;
+}
+
+static int eqos_probe_resources_adi(struct udevice *dev)
+{
+       struct eqos_priv *eqos = dev_get_priv(dev);
+       phy_interface_t interface;
+       int ret;
+
+       ret = eqos_get_base_addr_dt(dev);
+       if (ret) {
+               pr_err("eqos_get_base_addr_dt failed: %d\n", ret);
+               return ret;
+       }
+
+       interface = eqos->config->interface(dev);
+       if (interface == PHY_INTERFACE_MODE_NA) {
+               pr_err("Invalid PHY interface\n");
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+/**
+ * rgmii tx clock rate is set to 125 MHz regardless of phy mode, and
+ * by default the internal clock is always connected to 125 MHz. According
+ * to the HRM it is invalid for this clock to have any other speed, so
+ * the hardware won't work anyway if this is wrong.
+ */
+static ulong eqos_get_tick_clk_rate_adi(struct udevice *dev)
+{
+       return 125 * 1000000;
+}
+
+static int eqos_get_enetaddr_adi(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_plat(dev);
+
+       return eth_env_get_enetaddr("ethaddr", pdata->enetaddr);
+}
+
+static struct eqos_ops eqos_adi_ops = {
+       .eqos_inval_desc = eqos_inval_desc_generic,
+       .eqos_flush_desc = eqos_flush_desc_generic,
+       .eqos_inval_buffer = eqos_inval_buffer_generic,
+       .eqos_flush_buffer = eqos_flush_buffer_generic,
+       .eqos_probe_resources = eqos_probe_resources_adi,
+       .eqos_remove_resources = eqos_null_ops,
+       .eqos_start_resets = eqos_start_resets_adi,
+       .eqos_stop_resets = eqos_null_ops,
+       .eqos_start_clks = eqos_null_ops,
+       .eqos_stop_clks = eqos_null_ops,
+       .eqos_calibrate_pads = eqos_null_ops,
+       .eqos_disable_calibration = eqos_null_ops,
+       .eqos_set_tx_clk_speed = eqos_null_ops,
+       .eqos_get_enetaddr = eqos_get_enetaddr_adi,
+       .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_adi,
+};
+
+struct eqos_config __maybe_unused eqos_adi_config = {
+       .reg_access_always_ok = true,
+       .mdio_wait =  20,
+       .swr_wait = 50,
+       .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB,
+       .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_150_250,
+       .axi_bus_width = EQOS_AXI_WIDTH_32,
+       .interface = dev_read_phy_mode,
+       .ops = &eqos_adi_ops,
+};