+++ /dev/null
---- linux-2.6.14-rc2/include/asm-arm/arch-ixp4xx/platform.h 2005-09-24 13:17:24.000000000 +0200
-+++ test3/include/asm-arm/arch-ixp4xx/platform.h 2005-09-24 16:41:17.000000000 +0200
-@@ -93,7 +93,7 @@
-
- static inline void gpio_line_config(u8 line, u32 direction)
- {
-- if (direction == IXP4XX_GPIO_OUT)
-+ if (direction == IXP4XX_GPIO_IN)
- *IXP4XX_GPIO_GPOER |= (1 << line);
- else
- *IXP4XX_GPIO_GPOER &= ~(1 << line);
+On IXP4XX systems the FIS directory is big endian even with a little
+endian kernel. This patch recognises the FIS directory on such a
+system and byte swaps it to obtain a valid table based on the 'size'
+field of the FIS directory (the size field is know to always match the
+erase block size on such systems, and probably all systems.)
+
--- linux-2.6.13/.pc/10-mtdpart-redboot-fis-byteswap.patch/drivers/mtd/redboot.c 2005-08-28 16:41:01.000000000 -0700
+++ linux-2.6.13/drivers/mtd/redboot.c 2005-10-23 21:44:59.999694674 -0700
@@ -89,8 +89,34 @@
+++ /dev/null
-# The ixp4xx_set_irq_type API is missing return statements which causes
-# the result to be unusable and the error detection non existent.
-#
---- linux-2.6.13/arch/arm/mach-ixp4xx/orig/common.c 2005-09-25 09:52:57.658059680 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/common.c 2005-09-25 09:53:02.354355199 -0700
-@@ -125,7 +125,8 @@
- } else if (type & IRQT_LOW) {
- int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
- irq_type = IXP4XX_IRQ_LEVEL;
-- }
-+ } else
-+ return -EINVAL;
-
- ixp4xx_config_irq(irq, irq_type);
-
-@@ -142,6 +143,8 @@
-
- /* Set the new style */
- *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
-+
-+ return 0;
- }
-
- static void ixp4xx_irq_mask(unsigned int irq)
+++ /dev/null
-diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S
---- linux-2.6.11.12/arch/arm/boot/compressed/little-endian.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.11.12-le2/arch/arm/boot/compressed/little-endian.S 2005-07-17 12:13:55.000000000 +0200
-@@ -0,0 +1,13 @@
-+/*
-+ * linux/arch/arm/boot/compressed/little-endian.S
-+ *
-+ * Switch CPU into little endian mode.
-+ * Author: Nicolas Pitre
-+ */
-+
-+ .section ".start", #alloc, #execinstr
-+
-+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
-+ bic r0, r0, #(1 << 7) @ enable little endian mode
-+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
-+
-diff -urpN linux-2.6.11.12/arch/arm/boot/compressed/Makefile linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile
---- linux-2.6.11.12/arch/arm/boot/compressed/Makefile 2005-06-12 04:45:37.000000000 +0200
-+++ linux-2.6.11.12-le2/arch/arm/boot/compressed/Makefile 2005-07-17 12:13:55.000000000 +0200
-@@ -56,6 +56,8 @@ endif
-
- ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
- OBJS += big-endian.o
-+else
-+OBJS += little-endian.o
- endif
-
- #
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+CONFIG_SCSI_QLA2XXX=n
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r3.${PR_CONFIG}"
-
-include nslu2-kernel.inc
-
-# N2K_EXTRA_PATCHES - list of patches to apply (can include
-# patches to the files installed above)
-# N2K_PATCHES - full list of patches to apply, defaults to:
-# file://nslu2_2.6.11.patch;patch=1
-# file://usbnet.patch;patch=1
-# file://ixp4xx_copy_from.patch;patch=1
-# ${N2K_EXTRA_PATCHES}
-#
-# There are no added files no more.
-N2K_FILES = ""
-
-N2K_PATCHES = "\
- file://10-ixp4xx-copy-from.patch;patch=1 \
- file://10-ixp4xx-gpio.patch;patch=1 \
- file://15-ixp4xx-writesb-l-w.patch;patch=1 \
- file://20-timer.patch;patch=1 \
- file://25-nslu2-arch-reset.patch;patch=1 \
- file://30-i2c-x1205.patch;patch=1 \
- file://50-nslu2-arch.patch;patch=1 \
- file://50-nslu2-general.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://90-ixp4xx-pci-le.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
# Increment PR_CONFIG for changes to the nslu2-kernel specific
# defconfig (do *NOT* increment anything in here for changes
# to other kernel configs!)
-PR_CONFIG = "1"
+PR_CONFIG = "2"
#
# Increment the number below (i.e. the digits after PR) when
# making changes within this file or for changes to the patches
+++ /dev/null
-# OpenSlug Kernel for NSLU2
-#
-# The only purpose to this is to allow the openslug kernel to
-# have an openslug specific defconfig - in openslug-kernel-${PV}
-include nslu2-kernel_${PV}.bb
-# Increment the following if the openslug-kernel defconfig is
-# changed.
-PR_CONFIG = "1"
git.openpandora.org / openembedded.git / commitdiff