ARM: OMAP2+: Add additional GPMC timing parameters

Some of the GPMC timings parameters are currently missing from the GPMC
device-tree binding. Add these parameters to the binding documentation
as well as code to read them. Also add either "-ps" or "-ns" suffix to
the GPMC timing properties to indicate whether the timing is in
picoseconds or nanoseconds.

The existing code in gpmc_read_timings_dt() is checking the value of
of_property_read_u32() and only is successful storing the value read
in the gpmc_timings structure. Checking the return value in this case
is not necessary and we can simply read the value, if present, and
store directly in the gpmc_timings structure. Therefore, simplify the
code by removing these checks.

The comment in the gpmc_read_timings_dt() function, "only for OMAP3430"
is also incorrect as it is applicable to all OMAP3+ devices. So correct
this too.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
index 6fde1cf..4b87ea1 100644 (file)
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
@@ -35,35 +35,59 @@ Required properties:
 
 Timing properties for child nodes. All are optional and default to 0.
 
- - gpmc,sync-clk:      Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings corresponding to GPMC_CONFIG2:
- - gpmc,cs-on:         Assertion time
- - gpmc,cs-rd-off:     Read deassertion time
- - gpmc,cs-wr-off:     Write deassertion time
-
- ADV signal timings corresponding to GPMC_CONFIG3:
- - gpmc,adv-on:                Assertion time
- - gpmc,adv-rd-off:    Read deassertion time
- - gpmc,adv-wr-off:    Write deassertion time
-
- WE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,we-on:         Assertion time
- - gpmc,we-off:                Deassertion time
-
- OE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,oe-on:         Assertion time
- - gpmc,oe-off:                Deassertion time
-
- Access time and cycle time timings corresponding to GPMC_CONFIG5:
- - gpmc,page-burst-access: Multiple access word delay
- - gpmc,access:                Start-cycle to first data valid delay
- - gpmc,rd-cycle:      Total read cycle time
- - gpmc,wr-cycle:      Total write cycle time
+ - gpmc,sync-clk-ps:   Minimum clock period for synchronous mode, in picoseconds
+
+ Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
+ - gpmc,cs-on-ns:      Assertion time
+ - gpmc,cs-rd-off-ns:  Read deassertion time
+ - gpmc,cs-wr-off-ns:  Write deassertion time
+
+ ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
+ - gpmc,adv-on-ns:     Assertion time
+ - gpmc,adv-rd-off-ns: Read deassertion time
+ - gpmc,adv-wr-off-ns: Write deassertion time
+
+ WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,we-on-ns       Assertion time
+ - gpmc,we-off-ns:     Deassertion time
+
+ OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,oe-on-ns:      Assertion time
+ - gpmc,oe-off-ns:     Deassertion time
+
+ Access time and cycle time timings (in nanoseconds) corresponding to
+ GPMC_CONFIG5:
+ - gpmc,page-burst-access-ns:  Multiple access word delay
+ - gpmc,access-ns:             Start-cycle to first data valid delay
+ - gpmc,rd-cycle-ns:           Total read cycle time
+ - gpmc,wr-cycle-ns:           Total write cycle time
+ - gpmc,bus-turnaround-ns:     Turn-around time between successive accesses
+ - gpmc,cycle2cycle-delay-ns:  Delay between chip-select pulses
+ - gpmc,clk-activation-ns:     GPMC clock activation time
+ - gpmc,wait-monitoring-ns:    Start of wait monitoring with regard to valid
+                               data
+
+Boolean timing parameters. If property is present parameter enabled and
+disabled if omitted:
+ - gpmc,adv-extra-delay:       ADV signal is delayed by half GPMC clock
+ - gpmc,cs-extra-delay:                CS signal is delayed by half GPMC clock
+ - gpmc,cycle2cycle-diffcsen:  Add "cycle2cycle-delay" between successive
+                               accesses to a different CS
+ - gpmc,cycle2cycle-samecsen:  Add "cycle2cycle-delay" between successive
+                               accesses to the same CS
+ - gpmc,oe-extra-delay:                OE signal is delayed by half GPMC clock
+ - gpmc,we-extra-delay:                WE signal is delayed by half GPMC clock
+ - gpmc,time-para-granularity: Multiply all access times by 2
 
 The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access
- - gpmc,wr-data-mux-bus
+ - gpmc,wr-access-ns:          In synchronous write mode, for single or
+                               burst accesses, defines the number of
+                               GPMC_FCLK cycles from start access time
+                               to the GPMC_CLK rising edge used by the
+                               memory device for the first data capture.
+ - gpmc,wr-data-mux-bus-ns:    In address-data multiplex mode, specifies
+                               the time when the first data is driven on
+                               the address-data bus.
 
 GPMC chip-select settings properties for child nodes. All are optional.
 

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 85231b3..ab658eb 100644 (file)
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1230,67 +1230,67 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
 static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
                                                struct gpmc_timings *gpmc_t)
 {
-       u32 val;
+       struct gpmc_bool_timings *p;
+
+       if (!np || !gpmc_t)
+               return;
 
        memset(gpmc_t, 0, sizeof(*gpmc_t));
 
        /* minimum clock period for syncronous mode */
-       if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
-               gpmc_t->sync_clk = val;
+       of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
 
        /* chip select timtings */
-       if (!of_property_read_u32(np, "gpmc,cs-on", &val))
-               gpmc_t->cs_on = val;
-
-       if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
-               gpmc_t->cs_rd_off = val;
-
-       if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
-               gpmc_t->cs_wr_off = val;
+       of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
+       of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
+       of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
 
        /* ADV signal timings */
-       if (!of_property_read_u32(np, "gpmc,adv-on", &val))
-               gpmc_t->adv_on = val;
-
-       if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
-               gpmc_t->adv_rd_off = val;
-
-       if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
-               gpmc_t->adv_wr_off = val;
+       of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
+       of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
+       of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
 
        /* WE signal timings */
-       if (!of_property_read_u32(np, "gpmc,we-on", &val))
-               gpmc_t->we_on = val;
-
-       if (!of_property_read_u32(np, "gpmc,we-off", &val))
-               gpmc_t->we_off = val;
+       of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
+       of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
 
        /* OE signal timings */
-       if (!of_property_read_u32(np, "gpmc,oe-on", &val))
-               gpmc_t->oe_on = val;
-
-       if (!of_property_read_u32(np, "gpmc,oe-off", &val))
-               gpmc_t->oe_off = val;
+       of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
+       of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
 
        /* access and cycle timings */
-       if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
-               gpmc_t->page_burst_access = val;
-
-       if (!of_property_read_u32(np, "gpmc,access", &val))
-               gpmc_t->access = val;
-
-       if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
-               gpmc_t->rd_cycle = val;
-
-       if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
-               gpmc_t->wr_cycle = val;
-
-       /* only for OMAP3430 */
-       if (!of_property_read_u32(np, "gpmc,wr-access", &val))
-               gpmc_t->wr_access = val;
-
-       if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
-               gpmc_t->wr_data_mux_bus = val;
+       of_property_read_u32(np, "gpmc,page-burst-access-ns",
+                            &gpmc_t->page_burst_access);
+       of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
+       of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
+       of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
+       of_property_read_u32(np, "gpmc,bus-turnaround-ns",
+                            &gpmc_t->bus_turnaround);
+       of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
+                            &gpmc_t->cycle2cycle_delay);
+       of_property_read_u32(np, "gpmc,wait-monitoring-ns",
+                            &gpmc_t->wait_monitoring);
+       of_property_read_u32(np, "gpmc,clk-activation-ns",
+                            &gpmc_t->clk_activation);
+
+       /* only applicable to OMAP3+ */
+       of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
+       of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
+                            &gpmc_t->wr_data_mux_bus);
+
+       /* bool timing parameters */
+       p = &gpmc_t->bool_timings;
+
+       p->cycle2cyclediffcsen =
+               of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
+       p->cycle2cyclesamecsen =
+               of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
+       p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
+       p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
+       p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
+       p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
+       p->time_para_granularity =
+               of_property_read_bool(np, "gpmc,time-para-granularity");
 }
 
 #ifdef CONFIG_MTD_NAND