--- /dev/null
+# An example configuration file for MPD
+# See the mpd.conf man page for a more detailed description of each parameter.
+
+# Required files and directories ##############################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database.
+#
+#music_directory "~/music"
+music_directory "/media/content"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format.
+#
+#playlist_directory "~/.mpd/playlists"
+playlist_directory "/var/lib/mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up.
+#
+#db_file "~/.mpd/database"
+db_file "/var/lib/mpd/mpd.db"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+#log_file "~/.mpd/log"
+#error_file "~/.mpd/error-log"
+log_file "/var/lib/mpd/mpd.log"
+error_file "/var/lib/mpd/mpd.error"
+###############################################################################
+
+
+# Optional files ##############################################################
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default.
+#
+#pid_file "~/.mpd/pid"
+pid_file "/var/lib/mpd/mpd.pid"
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default.
+#
+#state_file "~/.mpd/state"
+state_file "/var/lib/mpd/mpdstate"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as, if set. MPD should
+# never run as root and you may use this setting to make MPD change its user
+# id after initialization. Do not use this setting if you start MPD as an
+# unprivileged user. This setting is disabled by default, and the server will
+# run as root.
+#
+#user "nobody"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon.
+#
+# For network
+bind_to_address "any"
+#bind_to_address "127.0.0.1"
+#
+# And for Unix Socket
+#bind_to_address "~/.mpd/socket"
+#
+# This setting is the port that is desired for the daemon to get assigned to.
+#
+port "6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback "yes"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. Optionally, 'comment' can be added to this
+# list.
+#
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+###############################################################################
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks "yes"
+#
+# If this setting is set to "yes, MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks "yes"
+#
+###############################################################################
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled "yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# can setting can be specified multiple times for different password profiles.
+#
+#password "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions "read,add,control,admin"
+#
+###############################################################################
+
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
+# other audio outputs.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+# type "alsa"
+# name "My ALSA Device"
+# device "hw:0,0" # optional
+# format "44100:16:2" # optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+# type "oss"
+# name "My OSS Device"
+# device "/dev/dsp" # optional
+# format "44100:16:2" # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+# type "shout"
+# encoding "ogg" # optional
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+# protocol "icecast2" # optional
+# user "source" # optional
+# description "My Stream Description" # optional
+# genre "jazz" # optional
+# public "no" # optional
+# timeout "2" # optional
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+# type "pulse"
+# name "My Pulse Output"
+# server "remote_server"
+# sink "remote_server_sink"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+# type "null"
+# name "My Null Output"
+#}
+#
+# This setting will change all decoded audio to be converted to the specified
+# format before being passed to the audio outputs. By default, this setting is
+# disabled.
+#
+#audio_output_format "44100:16:2"
+#
+# If MPD has been compiled with libsamplerate support, this setting specifies
+# the sample rate converter to use. Possible values can be found in the
+# mpd.conf man page or the libsamplerate documentation. By default, this is
+# setting is disabled.
+#
+#samplerate_converter "Fastest Sinc Interpolator"
+#
+###############################################################################
+
+
+# Volume control mixer ########################################################
+#
+# MPD has limited volume controls, to use them pick one below. If one is not
+# specified it may be autodetected at startup, depending on the dependencies
+# which were compiled into the server.
+#
+# An example for controlling an ALSA mixer:
+#
+mixer_type "alsa"
+mixer_device "default"
+mixer_control "PCM"
+#
+# An example for controlling an OSS mixer:
+#
+#mixer_type "oss"
+#mixer_device "/dev/mixer"
+#mixer_control "PCM"
+#
+# This example is a general volume control mixer, it is used to adjust the
+# volume of the audio sent to the audio output, and will work with all outputs.
+#
+#mixer_type "software"
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "album" or "track". See <http://www.replaygain.org> for more
+# details. By default this setting is disabled.
+#
+#replaygain "album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp "0"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness".
+#
+#volume_normalization "no"
+#
+###############################################################################
+
+
+# MPD Internal Buffering ######################################################
+#
+# This setting adjusts the size of internal decoded audio buffering. Changing
+# this may have undesired effects. Don't change this if you don't know what you
+# are doing.
+#
+#audio_buffer_size "2048"
+#
+# This setting controls the percentage of the buffer which is filled before
+# beginning to play. Increasing this reduces the chance of audio file skipping,
+# at the cost of increased time prior to audio playback.
+#
+#buffer_before_play "10%"
+#
+###############################################################################
+
+
+# HTTP Streaming Proxy ########################################################
+#
+# This setting specifies the HTTP proxy to use for playing HTTP streams. By
+# default, these settings will be disabled.
+#
+#http_proxy_host "proxy.isp.com"
+#http_proxy_port "8080"
+#http_proxy_user "user"
+#http_proxy_password "password"
+#
+###############################################################################
+
+
+# Resource Limitations ########################################################
+#
+# These settings are various limitations to prevent MPD from using too many
+# resources. Generally, these settings should be minimized to prevent security
+# risks, depending on the operating resources.
+#
+#connection_timeout "60"
+#max_connections "10"
+#max_playlist_length "16384"
+#max_command_list_size "2048"
+#max_output_buffer_size "8192"
+#
+###############################################################################
+
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting. After modification of this setting mpd
+# --create-db must be run to change the database.
+#
+filesystem_charset "UTF-8"
+#
+# This setting controls the encoding that ID3v1 tags should be converted from.
+#
+#id3v1_encoding "ISO-8859-1"
+#
+###############################################################################
git.openpandora.org / openembedded.git / commitdiff