linux-titan-sh4 2.6.16: Updates:

- Add support for getgeo to the ssfdc driver so lilo will work with onboard
  flash with recent kernels.
- Override the KERNEL_RELEASE to be KERNEL_VERSION - since sh kernels add
  -sh to the end and this isn't being picked up.
- Change the kernel imagetype to zImage since lilo boots that fine and the
  uncompressed kernel is too large to be booted.
- Fix misspelling of date in SRC_URI

diff --git a/packages/linux/linux-titan-sh4-2.6.16/titan-config b/packages/linux/linux-titan-sh4-2.6.16/titan-config
index 4b74c91..d6659e3 100644 (file)
--- a/packages/linux/linux-titan-sh4-2.6.16/titan-config
+++ b/packages/linux/linux-titan-sh4-2.6.16/titan-config
@@ -1,21 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-sh
-# Sat Nov 12 22:58:44 2005
+# Linux kernel version: 2.6.16-sh
+# Thu Jun 29 15:50:21 2006
 #
 CONFIG_SUPERH=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,24 +20,26 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOCALVERSION_AUTO=n
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -49,8 +48,11 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=m
 
 #
 # Loadable module support
@@ -63,6 +65,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System type
 #
@@ -88,6 +108,7 @@ CONFIG_KMOD=y
 # CONFIG_SH_SECUREEDGE5410 is not set
 # CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
 # CONFIG_SH_EDOSK7705 is not set
 # CONFIG_SH_SH4202_MICRODEV is not set
 # CONFIG_SH_LANDISK is not set
@@ -149,6 +170,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 
 #
 # Cache configuration
@@ -166,12 +188,13 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_RTC=y
 CONFIG_SH_FPU=y
 # CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
 
 #
 # Timer support
 #
 CONFIG_SH_TMU=y
-CONFIG_SH_PCLK_FREQ_BOOL=y
 CONFIG_SH_PCLK_FREQ=30000000
 
 #
@@ -205,7 +228,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x009e0000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf"
+CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/sm0p2"
 
 #
 # Bus options
@@ -237,6 +260,11 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
 #
 # Networking
 #
@@ -245,6 +273,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -301,9 +330,36 @@ CONFIG_IPV6_TUNNEL=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
 #
 # IP: Netfilter Configuration
@@ -322,40 +378,23 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_PHYSDEV is not set
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -371,13 +410,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -387,26 +422,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
+CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
@@ -424,6 +453,11 @@ CONFIG_IP6_NF_RAW=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_BRIDGE=y
 CONFIG_VLAN_8021Q=y
@@ -436,10 +470,18 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -452,8 +494,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -462,7 +506,6 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_IND=y
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
@@ -481,6 +524,8 @@ CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -531,6 +576,7 @@ CONFIG_FTL=m
 CONFIG_NFTL=m
 # CONFIG_NFTL_RW is not set
 CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
 
 #
 # RAM/ROM/Flash chip drivers
@@ -555,6 +601,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -589,6 +636,11 @@ CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -616,16 +668,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -669,6 +712,7 @@ CONFIG_CHR_DEV_SG=m
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -690,13 +734,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -730,6 +768,7 @@ CONFIG_SCSI_QLA2XXX=y
 # Network device support
 #
 CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -744,7 +783,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -809,6 +847,7 @@ CONFIG_8139_OLD_RX_RESET=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -864,6 +903,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -985,12 +1025,19 @@ CONFIG_SH_WDT=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -1001,6 +1048,7 @@ CONFIG_SH_WDT=m
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -1068,12 +1116,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1084,6 +1135,8 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
@@ -1106,6 +1159,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1145,6 +1199,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -1210,7 +1265,7 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
@@ -1235,6 +1290,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1275,6 +1331,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1342,6 +1399,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1397,18 +1455,22 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 # CONFIG_FRAME_POINTER is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 # CONFIG_EARLY_PRINTK is not set

diff --git a/packages/linux/linux-titan-sh4-2.6.16/titan-flash.patch b/packages/linux/linux-titan-sh4-2.6.16/titan-flash.patch
index 5a68c4e..fc633f3 100644 (file)
--- a/packages/linux/linux-titan-sh4-2.6.16/titan-flash.patch
+++ b/packages/linux/linux-titan-sh4-2.6.16/titan-flash.patch
@@ -5,9 +5,9 @@ upstream CVS.
 This implements the block device translation layer to match what the 
 onboard firmware implements.
 
-diff -durN -X ../diff.ignore linux/drivers/block/Kconfig gcc3.4.4/drivers/block/Kconfig
---- linux/drivers/block/Kconfig        2005-11-09 13:53:31.000000000 +1100
-+++ gcc3.4.4/drivers/block/Kconfig     2005-11-09 14:00:47.000000000 +1100
+diff -duNr linux-2.6.16-orig/drivers/block/Kconfig linux-2.6.16/drivers/block/Kconfig
+--- linux-2.6.16-orig/drivers/block/Kconfig    2006-06-29 16:12:57.000000000 +1000
++++ linux-2.6.16/drivers/block/Kconfig 2006-06-29 16:13:27.000000000 +1000
 @@ -190,6 +190,13 @@
          To compile this driver as a module, choose M here: the
          module will be called DAC960.
@@ -22,10 +22,10 @@ diff -durN -X ../diff.ignore linux/drivers/block/Kconfig gcc3.4.4/drivers/block/
  config BLK_DEV_UMEM
        tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
        depends on PCI && EXPERIMENTAL
-diff -durN -X ../diff.ignore linux/drivers/block/Makefile gcc3.4.4/drivers/block/Makefile
---- linux/drivers/block/Makefile       2004-12-25 08:35:24.000000000 +1100
-+++ gcc3.4.4/drivers/block/Makefile    2005-11-09 14:00:47.000000000 +1100
-@@ -35,6 +35,7 @@
+diff -duNr linux-2.6.16-orig/drivers/block/Makefile linux-2.6.16/drivers/block/Makefile
+--- linux-2.6.16-orig/drivers/block/Makefile   2006-06-29 16:12:57.000000000 +1000
++++ linux-2.6.16/drivers/block/Makefile        2006-06-29 16:13:27.000000000 +1000
+@@ -21,6 +21,7 @@
  obj-$(CONFIG_BLK_CPQ_DA)      += cpqarray.o
  obj-$(CONFIG_BLK_CPQ_CISS_DA)  += cciss.o
  obj-$(CONFIG_BLK_DEV_DAC960)  += DAC960.o
@@ -33,10 +33,10 @@ diff -durN -X ../diff.ignore linux/drivers/block/Makefile gcc3.4.4/drivers/block
  obj-$(CONFIG_CDROM_PKTCDVD)   += pktcdvd.o
  
  obj-$(CONFIG_BLK_DEV_UMEM)    += umem.o
-diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.c gcc3.4.4/drivers/block/ssfdc.c
---- linux/drivers/block/ssfdc.c        1970-01-01 10:00:00.000000000 +1000
-+++ gcc3.4.4/drivers/block/ssfdc.c     2005-11-09 14:00:47.000000000 +1100
-@@ -0,0 +1,2738 @@
+diff -duNr linux-2.6.16-orig/drivers/block/ssfdc.c linux-2.6.16/drivers/block/ssfdc.c
+--- linux-2.6.16-orig/drivers/block/ssfdc.c    1970-01-01 10:00:00.000000000 +1000
++++ linux-2.6.16/drivers/block/ssfdc.c 2006-06-29 16:13:50.000000000 +1000
+@@ -0,0 +1,2742 @@
 +/* $id:   $
 +ssfdc.c - Solid State Flopyy Disk Card
 +
@@ -122,6 +122,7 @@ diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.c gcc3.4.4/drivers/block/
 +static ssfdc_dev *ssfdc[MAX_SSFDC];
 +
 +static int ssfdc_open(struct inode *i_node, struct file *fptr);
++static int ssfdc_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 +static int ssfdc_release(struct inode *i_node, struct file *fptr);
 +static int ssfdc_ioctl(struct inode *i_node, struct file *fptr, unsigned cmd, unsigned long arg);
 +static int ssfdc_revalidate(struct gendisk *disk);
@@ -130,6 +131,7 @@ diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.c gcc3.4.4/drivers/block/
 +static struct block_device_operations ssfdc_fops = {
 +      .owner                  = THIS_MODULE,
 +      .open                   = ssfdc_open,
++      .getgeo                 = ssfdc_getgeo,
 +      .release                = ssfdc_release,
 +      .ioctl                  = ssfdc_ioctl,
 +      // bjm out .revalidate_disk     = ssfdc_revalidate,
@@ -2385,10 +2387,7 @@ diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.c gcc3.4.4/drivers/block/
 +
 +static int ssfdc_ioctl(struct inode *i_node, struct file *fptr, unsigned cmd, unsigned long arg)
 +{
-+      int err, drive, int_val;
-+      unsigned char heads, sectors;
-+      unsigned int cylinders;
-+      struct hd_geometry  geo;
++      int drive, int_val;
 +      ssfdc_dev *psm;
 +
 +#if DEBUG_SSFDC
@@ -2429,28 +2428,33 @@ diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.c gcc3.4.4/drivers/block/
 +                      printk(KERN_DEBUG "ssfdc_ioctl(BLKGETSIZE) not handled.\n");
 +#endif
 +                      break;
-+
-+              case HDIO_GETGEO:
-+                      if ((void *) arg == NULL) return -EINVAL;
-+                      if (!access_ok(VERIFY_WRITE,  arg, sizeof(geo)))
-+                              return -EFAULT;
-+                      if ((err=CheckLogCHS( psm, &cylinders, &heads, &sectors)))
-+                              return ssfdc_maperror(err);     
-+                      memset(&geo, 0, sizeof(geo));
-+                      geo.cylinders = cylinders;
-+                      geo.heads = heads;
-+                      geo.sectors = sectors;
-+                      geo.start = get_start_sect(i_node->i_bdev);
-+                      if (copy_to_user((void *) arg, &geo, sizeof(geo)))
-+                              return -EFAULT;         
-+                      if (copy_to_user((void *) arg, &geo, sizeof(geo)))
-+                              return -EFAULT;         
-+                      return 0;
 +      }
 +      return -EINVAL;
 +}
 +
 +
++static int ssfdc_getgeo(struct block_device *bdev, struct hd_geometry *geo)
++{
++      unsigned char heads, sectors;
++      unsigned int cylinders;
++      struct gendisk *disk = bdev->bd_disk;
++      ssfdc_dev *psm = disk->private_data;
++      int drive = psm->sm_minor;
++      int err;
++
++      if (drive < 0 || drive >= MAX_SSFDC)
++              return -ENODEV;                                                                         
++
++      err = CheckLogCHS(psm, &cylinders, &heads, &sectors);
++      if (err)
++              return ssfdc_maperror(err);
++      
++      geo->heads = heads;
++      geo->sectors = sectors;
++      geo->cylinders = cylinders;
++      return 0;
++}
++
 +
 +static int ssfdc_revalidate(struct gendisk *disk)
 +{
@@ -2775,9 +2779,9 @@ diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.c gcc3.4.4/drivers/block/
 +MODULE_LICENSE("GPL");
 +
 +/* End of Linux Driver Modifications */
-diff -durN -X ../diff.ignore linux/drivers/block/ssfdc.h gcc3.4.4/drivers/block/ssfdc.h
---- linux/drivers/block/ssfdc.h        1970-01-01 10:00:00.000000000 +1000
-+++ gcc3.4.4/drivers/block/ssfdc.h     2005-11-09 14:00:47.000000000 +1100
+diff -duNr linux-2.6.16-orig/drivers/block/ssfdc.h linux-2.6.16/drivers/block/ssfdc.h
+--- linux-2.6.16-orig/drivers/block/ssfdc.h    1970-01-01 10:00:00.000000000 +1000
++++ linux-2.6.16/drivers/block/ssfdc.h 2006-06-29 16:13:27.000000000 +1000
 @@ -0,0 +1,372 @@
 +/* $id:   $ */
 +#ifndef _SSFDC_H

diff --git a/packages/linux/linux-titan-sh4_2.6.16.bb b/packages/linux/linux-titan-sh4_2.6.16.bb
index 2c4316a..da10945 100644 (file)
--- a/packages/linux/linux-titan-sh4_2.6.16.bb
+++ b/packages/linux/linux-titan-sh4_2.6.16.bb
@@ -7,7 +7,7 @@ PR = "r0"
 # The "date=20060328" should be changed to "tag=linux-2_6_16" - but the
 # tag won't exit till 2.6.17 is released
 SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
-cvs://anonymous@linuxsh.cvs.sourceforge.net/cvsroot/linuxsh;module=linux;data=20060331 \
+cvs://anonymous@linuxsh.cvs.sourceforge.net/cvsroot/linuxsh;module=linux;date=20060331 \
           file://titan-flash.patch;patch=1 \
           file://titan-config"
 S = "${WORKDIR}/linux-${PV}"
@@ -17,8 +17,11 @@ COMPATIBLE_HOST = 'sh4.*-linux'
 inherit kernel
 
 ARCH = "sh"
-KERNEL_IMAGETYPE = "vmlinux"
-KERNEL_OUTPUT = "${KERNEL_IMAGETYPE}"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"
+
+# Fix up kernel version - sh kernels get -sh added automatically
+KERNEL_RELEASE = "${KERNEL_VERSION}"
 
 #
 # The linux-sh cvs tree is a "drop in source tree" and needs to be copied