vlan: add pre-up/post-down/up scripts

diff --git a/recipes/vlan/files/ip b/recipes/vlan/files/ip
new file mode 100644 (file)
index 0000000..d7de05c
--- /dev/null
+++ b/recipes/vlan/files/ip
@@ -0,0 +1,21 @@
+#!/bin/sh
+# This should probably go into ifupdown
+# But usually only those with lots of interfaces (vlans) need these
+if [ -d "/proc/sys/net/ipv4/conf/$IFACE" ]
+then
+       if [ -n "$IF_IP_PROXY_ARP" ]; then
+               if [ "$IF_IP_PROXY_ARP" -eq "1" ]; then
+                       echo 1 > "/proc/sys/net/ipv4/conf/$IFACE/proxy_arp"
+               else
+                       echo 0 > "/proc/sys/net/ipv4/conf/$IFACE/proxy_arp"
+               fi
+       fi
+       if [ -n "$IF_IP_RP_FILTER" ]; then
+               if [ "$IF_IP_RP_FILTER" -eq "0" ]; then
+                       echo 0 > "/proc/sys/net/ipv4/conf/$IFACE/rp_filter"
+               else
+                       echo 1 > "/proc/sys/net/ipv4/conf/$IFACE/rp_filter"
+               fi
+       fi
+fi
+

diff --git a/recipes/vlan/files/vlan-post-down b/recipes/vlan/files/vlan-post-down
new file mode 100644 (file)
index 0000000..89b16fb
--- /dev/null
+++ b/recipes/vlan/files/vlan-post-down
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# If IFACE is an automagic vlan interface (without the vlan-raw-device
+# parameter) then let's try to discover the magic here..  Another way would be
+# to just probe for the right device name in /proc/net/vlan
+
+case "$IFACE" in
+  # Ignore any alias (#272891)
+  *:*)
+    exit 0
+  ;;
+  eth*.0*|bond*.0*|wlan*.0*)
+    IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
+  ;;
+  eth*.*|bond*.*|wlan*.*)
+    IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
+  ;;
+  # Test for vlan raw device (#196890, #292648)
+  *)
+    [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0
+  ;;
+esac
+
+if [ ! -x /sbin/vconfig ]; then
+    exit 0
+fi
+
+vconfig rem $IFACE

diff --git a/recipes/vlan/files/vlan-pre-up b/recipes/vlan/files/vlan-pre-up
new file mode 100644 (file)
index 0000000..b977be8
--- /dev/null
+++ b/recipes/vlan/files/vlan-pre-up
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# Most of this stuff is to enable vlans
+
+case "$IFACE" in
+  # Ignore any alias (#272891) which uses <interface>:<alabel>
+  *:*)
+    exit 0
+  ;;
+  vlan0*)
+    vconfig set_name_type VLAN_PLUS_VID
+    VLANID=`echo $IFACE|sed "s/vlan0*//"`
+  ;;
+  vlan*)
+    vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+    VLANID=`echo $IFACE|sed "s/vlan0*//"`
+  ;;
+  eth*.0*|bond*.0*|wlan*.0*)
+    vconfig set_name_type DEV_PLUS_VID
+    VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//;s/wlan[0-9][0-9]*\.0*//"`
+    IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
+  ;;
+  eth*.*|bond*.*|wlan*.*)
+    vconfig set_name_type DEV_PLUS_VID_NO_PAD
+    VLANID=`echo $IFACE|sed "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g"`
+    IF_VLAN_RAW_DEVICE=`echo $IFACE|sed "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
+  ;;
+  *.0*)
+    # Silently ignore interfaces which we do not (know how to) support
+    [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0
+    vconfig set_name_type DEV_PLUS_VID
+    VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"`
+  ;;
+  *.*)
+    # Silently ignore interfaces which we do not (know how to) support
+    [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0
+    vconfig set_name_type DEV_PLUS_VID_NO_PAD
+    VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"`
+  ;;
+
+  *)
+    exit 0
+  ;;
+esac
+
+if [ -n "$IF_VLAN_RAW_DEVICE" ]; then
+    if [ ! -x /sbin/vconfig ]; then
+        exit 0
+    fi
+    if ! ip link show dev "$IF_VLAN_RAW_DEVICE" > /dev/null; then
+        echo "$IF_VLAN_RAW_DEVICE does not exist, unable to create $IFACE"
+        exit 1
+    fi
+    ip link set up dev $IF_VLAN_RAW_DEVICE
+    vconfig add $IF_VLAN_RAW_DEVICE $VLANID
+fi
+
+# This is not vlan specific, and should actually go somewhere else.
+if [ -n "$IF_HW_MAC_ADDRESS" ]; then
+    ip link set $IFACE address $IF_HW_MAC_ADDRESS
+fi

diff --git a/recipes/vlan/vlan_1.9.bb b/recipes/vlan/vlan_1.9.bb
index 3a10e89..a4f5e5a 100644 (file)
--- a/recipes/vlan/vlan_1.9.bb
+++ b/recipes/vlan/vlan_1.9.bb
@@ -4,8 +4,12 @@ PR = "r0"
 
 S = "${WORKDIR}/vlan/"
 
-SRC_URI = "http://www.candelatech.com/~greear/vlan/vlan.${PV}.tar.gz \
-          "
+SRC_URI = " \
+       http://www.candelatech.com/~greear/vlan/vlan.${PV}.tar.gz \
+       file://ip \
+       file://vlan-pre-up \
+       file://vlan-post-down \
+       "
 
 inherit base
 
@@ -20,5 +24,11 @@ do_compile() {
 do_install() {
        install -d "${D}${sbindir}"
        install -m 755 "${S}/vconfig" "${D}${sbindir}/vconfig"
+       install -d ${D}/${sysconfdir}/network/if-pre-up.d
+       install -d ${D}/${sysconfdir}/network/if-post-down.d
+       install -d ${D}/${sysconfdir}/network/if-up.d
+       install -m 0755 ${WORKDIR}/ip ${D}/${sysconfdir}/network/if-up.d/
+       install -m 0755 ${WORKDIR}/vlan-pre-up ${D}/${sysconfdir}/network/if-pre-up.d/vlan
+       install -m 0755 ${WORKDIR}/vlan-post-down ${D}/${sysconfdir}/network/if-post-down.d/vlan
 }