MISCELLANEOUS MCA-SUPPORT
P: James Bottomley
-M: jejb@steeleye.com
+M: James.Bottomley@HansenPartnership.com
L: linux-kernel@vger.kernel.org
S: Maintained
SCSI SUBSYSTEM
P: James E.J. Bottomley
-M: James.Bottomley@SteelEye.com
+M: James.Bottomley@HansenPartnership.com
L: linux-scsi@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
+T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git
S: Maintained
SCSI TAPE DRIVER
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
- -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+ -e s/sh[234].*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
bool
config CPU_HAS_SR_RB
- bool "CPU has SR.RB"
- depends on CPU_SH3 || CPU_SH4
- default y
+ bool
help
This will enable the use of SR.RB register bank usage. Processors
that are lacking this bit must have another method in place for
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at
- <http://www.m17n.org/linux-sh/dreamcast/>. There is a
- Dreamcast project is at <http://linuxdc.sourceforge.net/>.
+ More information at <http://www.linux-sh.org>
config SH_MPC1211
bool "Interface MPC1211"
on the VM subsystem for higher order allocations. This option
will also use IRQ stacks to compensate for the reduced stackspace.
+config IRQSTACKS
+ bool "Use separate kernel stacks when processing interrupts"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the kernel will use separate kernel stacks
+ for handling hard and soft interrupts. This can help avoid
+ overflowing the process kernel stacks.
+
config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
-OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -R .stab -R .stabstr -S
#
# arch/sh/defconfig doesn't reflect any real hardware, and as such should
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pata_platform.h>
+#include <linux/types.h>
+#include <net/ax88796.h>
#include <asm/machvec.h>
#include <asm/r7780rp.h>
#include <asm/clock.h>
.resource = heartbeat_resources,
};
+static struct ax_plat_data ax88796_platdata = {
+ .flags = AXFLG_HAS_93CX6,
+ .wordlength = 2,
+ .dcr_val = 0x1,
+ .rcr_val = 0x40,
+};
+
+static struct resource ax88796_resources[] = {
+ {
+#ifdef CONFIG_SH_R7780RP
+ .start = 0xa5800400,
+ .end = 0xa5800400 + (0x20 * 0x2) - 1,
+#else
+ .start = 0xa4100400,
+ .end = 0xa4100400 + (0x20 * 0x2) - 1,
+#endif
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_AX88796,
+ .end = IRQ_AX88796,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ax88796_device = {
+ .name = "ax88796",
+ .id = 0,
+
+ .dev = {
+ .platform_data = &ax88796_platdata,
+ },
+
+ .num_resources = ARRAY_SIZE(ax88796_resources),
+ .resource = ax88796_resources,
+};
+
+
static struct platform_device *r7780rp_devices[] __initdata = {
&r8a66597_usb_host_device,
&m66592_usb_peripheral_device,
&cf_ide_device,
&heartbeat_device,
+ &ax88796_device,
};
static int __init r7780rp_devices_setup(void)
ctrl_outw(0x0001, PA_POFF);
}
+static inline unsigned char is_ide_ioaddr(unsigned long addr)
+{
+ return ((cf_ide_resources[0].start <= addr &&
+ addr <= cf_ide_resources[0].end) ||
+ (cf_ide_resources[1].start <= addr &&
+ addr <= cf_ide_resources[1].end));
+}
+
+void highlander_writeb(u8 b, void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ ctrl_outw((u16)b, tmp);
+ else
+ ctrl_outb(b, tmp);
+}
+
+u8 highlander_readb(void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ return ctrl_inw(tmp) & 0xff;
+ else
+ return ctrl_inb(tmp);
+}
+
/*
* Initialize the board
*/
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
+ .mv_readb = highlander_readb,
+ .mv_writeb = highlander_writeb,
};
ctrl_outl(0x00051001, MSTPCR0);
ctrl_outl(0x00000000, MSTPCR1);
- /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
- ctrl_outl(0xffffbfC0, MSTPCR2);
+ /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
+ ctrl_outl(0xffffb7c0, MSTPCR2);
ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Thu Jul 12 12:33:15 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:30:49 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_MAX_ACTIVE_REGIONS=2
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
# Board support
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
+CONFIG_GUSA=y
#
# Boot options
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
-#
-# I2C RTC drivers
-#
-
#
# SPI RTC drivers
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_RTC_DRV_SH=y
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
+# CONFIG_IRQSTACKS is not set
# CONFIG_SH_KGDB is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
{ INT_MWPDI, "MWPDI: PERR from target at data write"},
{ INT_MRDPEI, "MRDPEI: Master read data parity error"}
};
-#define NUM_PCI_INT_ERRS (sizeof(int_error)/sizeof(struct pci_err))
+#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error)
static struct pci_err aint_error[]={
{ AINT_MBI, "MBI: Master broken"},
{ AINT_WDPE, "WDPE: Write data parity"}
};
-#define NUM_PCI_AINT_ERRS (sizeof(aint_error)/sizeof(struct pci_err))
+#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error)
static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors)
{
* bits/4. This is to make it easier to read the value directly from the
* datasheets. The IPR address is calculated using the ipr_offset table.
*/
-
void register_ipr_controller(struct ipr_desc *desc)
{
int i;
disable_ipr_irq(p->irq);
}
}
-
EXPORT_SYMBOL(register_ipr_controller);
-
-#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
-int ipr_irq_demux(int irq)
-{
- return irq;
-}
-#endif
#include <asm/mmzone.h>
#include <asm/sci.h>
+static struct resource usbf_resources[] = {
+ [0] = {
+ .name = "m66592_udc",
+ .start = 0xA4480000,
+ .end = 0xA44800FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "m66592_udc",
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbf_device = {
+ .name = "m66592_udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usbf_resources),
+ .resource = usbf_resources,
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
};
static struct platform_device *sh7722_devices[] __initdata = {
+ &usbf_device,
&sci_device,
};
}
#endif
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
union irq_ctx *curctx, *irqctx;
#endif
irq = irq_demux(evt2irq(irq));
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
curctx = (union irq_ctx *)current_thread_info();
irqctx = hardirq_ctx[smp_processor_id()];
return 1;
}
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
static char softirq_stack[NR_CPUS * THREAD_SIZE]
__attribute__((__section__(".bss.page_aligned")));
#include <asm/clock.h>
#include <asm/mmu_context.h>
-extern void * __rd_start, * __rd_end;
-
-/*
- * Machine setup..
- */
-
/*
* Initialize loops_per_jiffy as 10000000 (1000MIPS).
* This value will be used at the very early stage of serial setup.
extern int root_mountflags;
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-static struct resource code_resource = { .name = "Kernel code", };
-static struct resource data_resource = { .name = "Kernel data", };
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
+
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
unsigned long memory_start;
EXPORT_SYMBOL(memory_start);
-
-unsigned long memory_end;
+unsigned long memory_end = 0;
EXPORT_SYMBOL(memory_end);
static int __init early_parse_mem(char *p)
sparse_memory_present_with_active_regions(0);
#ifdef CONFIG_BLK_DEV_INITRD
- ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
- if (&__rd_start != &__rd_end) {
- LOADER_TYPE = 1;
- INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
- __MEMORY_START;
- INITRD_SIZE = (unsigned long)&__rd_end -
- (unsigned long)&__rd_start;
- }
+ ROOT_DEV = Root_RAM0;
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
data_resource.end = virt_to_phys(_edata)-1;
memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
- memory_end = memory_start + __MEMORY_SIZE;
+ if (!memory_end)
+ memory_end = memory_start + __MEMORY_SIZE;
#ifdef CONFIG_CMDLINE_BOOL
strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-/* $Id: vmlinux.lds.S,v 1.8 2003/05/16 17:18:14 lethal Exp $
+/*
* ld script to make SuperH Linux kernel
* Written by Niibe Yutaka
*/
ENTRY(_start)
SECTIONS
{
- . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
- _text = .; /* Text and read-only data */
- text = .; /* Text and read-only data */
- .empty_zero_page : {
- *(.empty_zero_page)
+ . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+ _text = .; /* Text and read-only data */
+
+ .empty_zero_page : {
+ *(.empty_zero_page)
} = 0
- .text : {
- *(.text.head)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- *(.fixup)
- *(.gnu.warning)
+
+ .text : {
+ *(.text.head)
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
} = 0x0009
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ _etext = .; /* End of text section */
- _etext = .; /* End of text section */
+ BUG_TABLE
+ NOTES
+ RO_DATA(PAGE_SIZE)
- RODATA
+ . = ALIGN(THREAD_SIZE);
+ .data : { /* Data */
+ *(.data.init_task)
- BUG_TABLE
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
- .data : { /* Data */
- DATA_DATA
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.read_mostly)
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(PAGE_SIZE);
- __rd_start = .;
- *(.initrd)
- . = ALIGN(PAGE_SIZE);
- __rd_end = .;
+ . = ALIGN(PAGE_SIZE);
+ *(.data.page_aligned)
- CONSTRUCTORS
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+
+ DATA_DATA
+ CONSTRUCTORS
}
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : { *(.data.page_aligned) }
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- PERCPU(PAGE_SIZE)
-
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
- _edata = .; /* End of data section */
-
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : { *(.data.init_task) }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- _sinittext = .;
- .init.text : { *(.init.text) }
- _einittext = .;
- .init.data : { *(.init.data) }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
-
- /* .exit.text is discarded at runtime, not link time, to deal with
- references from .rodata */
- .exit.text : { *(.exit.text) }
- .exit.data : { *(.exit.data) }
+ _edata = .; /* End of data section */
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
+ __init_begin = .;
+ _sinittext = .;
+ .init.text : { *(.init.text) }
+ _einittext = .;
+ .init.data : { *(.init.data) }
+
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
+ __initcall_start = .;
+ .initcall.init : {
+ INITCALLS
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+
+ SECURITY_INIT
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
#endif
- . = ALIGN(4);
- __machvec_start = .;
- .machvec.init : { *(.machvec.init) }
- __machvec_end = .;
-
- . = ALIGN(PAGE_SIZE);
- .bss : {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
. = ALIGN(4);
- _ebss = .; /* uClinux MTD sucks */
- _end = . ;
- }
-
- /* When something in the kernel is NOT compiled as a module, the
- * module cleanup code and data are put into these segments. Both
- * can then be thrown away, as cleanup code is never called unless
- * it's a module.
- */
- /DISCARD/ : {
- *(.exitcall.exit)
+ __machvec_start = .;
+ .machvec.init : { *(.machvec.init) }
+ __machvec_end = .;
+
+ PERCPU(PAGE_SIZE)
+
+ /*
+ * .exit.text is discarded at runtime, not link time, to deal with
+ * references from __bug_table
+ */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
+ . = ALIGN(PAGE_SIZE);
+ .bss : {
+ __init_end = .;
+ __bss_start = .; /* BSS */
+ *(.bss.page_aligned)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .; /* uClinux MTD sucks */
+ _end = . ;
}
- STABS_DEBUG
+ /*
+ * When something in the kernel is NOT compiled as a module, the
+ * module cleanup code and data are put into these segments. Both
+ * can then be thrown away, as cleanup code is never called unless
+ * it's a module.
+ */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
- DWARF_DEBUG
+ STABS_DEBUG
+ DWARF_DEBUG
}
.text : { *(.text) } :text =0x90909090
.note : { *(.note.*) } :text :note
.eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
- .eh_frame : { KEEP (*(.eh_frame)) } :text
+ .eh_frame : {
+ KEEP (*(.eh_frame))
+ LONG (0)
+ } :text
.dynamic : { *(.dynamic) } :text :dynamic
.useless : {
*(.got.plt) *(.got)
EX( mov.l @r5+,r9 )
EX( mov.l @r5+,r10 )
EX( mov.l @r5+,r11 )
+#ifdef CONFIG_CPU_SH4
EX( movca.l r0,@r4 )
+#else
+EX( mov.l r0,@r4 )
+#endif
add #-32, r6
EX( mov.l r1,@(4,r4) )
mov #32, r0
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
-#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/io.h>
*/
#define NR_CNTRS 2
-extern const char *get_cpu_subtype(void);
-
struct op_counter_config {
unsigned long enabled;
unsigned long event;
* behavior.
*/
-static int sh7750_timer_notify(struct notifier_block *self,
- unsigned long val, void *regs)
+static int sh7750_timer_notify(struct pt_regs *regs)
{
- oprofile_add_sample((struct pt_regs *)regs, 0);
+ oprofile_add_sample(regs, 0);
return 0;
}
-static struct notifier_block sh7750_timer_notifier = {
- .notifier_call = sh7750_timer_notify,
-};
-
static u64 sh7750_read_counter(int counter)
{
u32 hi, lo;
ctrl_outw(pmcr | PMCR_ENABLE, PMCR2);
}
- return register_profile_notifier(&sh7750_timer_notifier);
+ return register_timer_hook(sh7750_timer_notify);
}
static void sh7750_perf_counter_stop(void)
ctrl_outw(ctrl_inw(PMCR1) & ~PMCR_PMEN, PMCR1);
ctrl_outw(ctrl_inw(PMCR2) & ~PMCR_PMEN, PMCR2);
- unregister_profile_notifier(&sh7750_timer_notifier);
+ unregister_timer_hook(sh7750_timer_notify);
}
static struct oprofile_operations sh7750_perf_counter_ops = {
.stop = sh7750_perf_counter_stop,
};
-int __init oprofile_arch_init(struct oprofile_operations **ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER))
return -ENODEV;
- sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype();
- *ops = &sh7750_perf_counter_ops;
+ ops = &sh7750_perf_counter_ops;
+ ops->cpu_type = (char *)get_cpu_subtype(¤t_cpu_data);
printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n",
sh7750_perf_counter_ops.cpu_type);
#
-# List of boards.
+# MACH_<xxx> CONFIG_<xxx>
#
#
-# MACH_<xxx> CONFIG_<xxx>
+# List of board groups.
#
SE SH_SOLUTION_ENGINE
-7751SE SH_7751_SOLUTION_ENGINE
-7722SE SH_7722_SOLUTION_ENGINE
-7343SE SH_7343_SOLUTION_ENGINE
+HIGHLANDER SH_HIGHLANDER
+RTS7751R2D SH_RTS7751R2D
+
+#
+# List of companion chips / MFDs.
+#
+HD64461 HD64461
+HD64465 HD64465
+
+#
+# List of boards.
+#
7206SE SH_7206_SOLUTION_ENGINE
+7343SE SH_7343_SOLUTION_ENGINE
7619SE SH_7619_SOLUTION_ENGINE
+7722SE SH_7722_SOLUTION_ENGINE
+7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
-HD64461 HD64461
-HD64465 HD64465
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
HS7751RVOIP SH_HS7751RVOIP
-RTS7751R2D SH_RTS7751R2D
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW
LBOXRE2 SH_LBOX_RE2
+X3PROTO SH_X3PROTO
+MAGICPANELR2 SH_MAGIC_PANEL_R2
+R2D_PLUS RTS7751R2D_PLUS
+R2D_1 RTS7751R2D_1
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Tue Oct 9 15:37:16 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:35:27 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_TEA5761 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=y
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
+# CONFIG_DVB_TUNER_MT2266 is not set
+# CONFIG_DVB_TUNER_MT2131 is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
#
# Miscellaneous devices
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Mon Oct 1 18:01:38 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:35:57 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
# CONFIG_POOR_MANS_STRACE is not set
-# CONFIG_SH_ALPHANUMERIC is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Mon Oct 1 17:50:35 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:36:08 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
# CONFIG_USER_NS is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
# CONFIG_POOR_MANS_STRACE is not set
-# CONFIG_SH_ALPHANUMERIC is not set
CONFIG_SH_NO_BSS_INIT=y
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
* void protected_mode_jump(u32 entrypoint, u32 bootparams);
*/
protected_mode_jump:
- xorl %ebx, %ebx # Flag to indicate this is a boot
movl %edx, %esi # Pointer to boot_params table
movl %eax, 2f # Patch ljmpl instruction
- jmp 1f # Short jump to flush instruction q.
-1:
movw $__BOOT_DS, %cx
+ xorl %ebx, %ebx # Per the 32-bit boot protocol
+ xorl %ebp, %ebp # Per the 32-bit boot protocol
+ xorl %edi, %edi # Per the 32-bit boot protocol
movl %cr0, %edx
orb $1, %dl # Protected mode (PE) bit
movl %edx, %cr0
+ jmp 1f # Short jump to serialize on 386/486
+1:
movw %cx, %ds
movw %cx, %es
resume_execution(cur, regs, kcb);
regs->eflags |= kcb->kprobe_saved_eflags;
-#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
- if (raw_irqs_disabled_flags(regs->eflags))
- trace_hardirqs_off();
- else
- trace_hardirqs_on();
-#endif
+ trace_hardirqs_fixup_flags(regs->eflags);
/*Restore back the original saved kprobes variables and continue. */
if (kcb->kprobe_status == KPROBE_REENTER) {
resume_execution(cur, regs, kcb);
regs->eflags |= kcb->kprobe_saved_rflags;
-#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
- if (raw_irqs_disabled_flags(regs->eflags))
- trace_hardirqs_off();
- else
- trace_hardirqs_on();
-#endif
+ trace_hardirqs_fixup_flags(regs->eflags);
/* Restore the original saved kprobes variables and continue. */
if (kcb->kprobe_status == KPROBE_REENTER) {
#ifdef CONFIG_KPROBES
fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code)
{
+ trace_hardirqs_fixup();
+
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
== NOTIFY_STOP)
return;
/* runs on IST stack. */
asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
{
+ trace_hardirqs_fixup();
+
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
return;
}
};
static cycle_t clock_base;
-/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first
- * real optimization trick!
- *
- * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
- * them as a batch when lazy_mode is eventually turned off. Because hypercalls
- * are reasonably expensive, batching them up makes sense. For example, a
- * large munmap might update dozens of page table entries: that code calls
- * paravirt_enter_lazy_mmu(), does the dozen updates, then calls
- * lguest_leave_lazy_mode().
- *
- * So, when we're in lazy mode, we call async_hypercall() to store the call for
- * future processing. When lazy mode is turned off we issue a hypercall to
- * flush the stored calls.
- */
-static void lguest_leave_lazy_mode(void)
-{
- paravirt_leave_lazy(paravirt_get_lazy_mode());
- hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
-}
-
-static void lazy_hcall(unsigned long call,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3)
-{
- if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
- hcall(call, arg1, arg2, arg3);
- else
- async_hcall(call, arg1, arg2, arg3);
-}
-
-/* async_hcall() is pretty simple: I'm quite proud of it really. We have a
+/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
* do a normal hypercall. Each entry in the ring has 4 slots for the hypercall
* arguments, and a "hcall_status" word which is 0 if the call is ready to go,
* full and we just make the hypercall directly. This has the nice side
* effect of causing the Host to run all the stored calls in the ring buffer
* which empties it for next time! */
-void async_hcall(unsigned long call,
- unsigned long arg1, unsigned long arg2, unsigned long arg3)
+static void async_hcall(unsigned long call, unsigned long arg1,
+ unsigned long arg2, unsigned long arg3)
{
/* Note: This code assumes we're uniprocessor. */
static unsigned int next_call;
}
local_irq_restore(flags);
}
-/*:*/
+
+/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first
+ * real optimization trick!
+ *
+ * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
+ * them as a batch when lazy_mode is eventually turned off. Because hypercalls
+ * are reasonably expensive, batching them up makes sense. For example, a
+ * large munmap might update dozens of page table entries: that code calls
+ * paravirt_enter_lazy_mmu(), does the dozen updates, then calls
+ * lguest_leave_lazy_mode().
+ *
+ * So, when we're in lazy mode, we call async_hcall() to store the call for
+ * future processing. */
+static void lazy_hcall(unsigned long call,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ hcall(call, arg1, arg2, arg3);
+ else
+ async_hcall(call, arg1, arg2, arg3);
+}
+
+/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue a hypercall to flush any stored calls. */
+static void lguest_leave_lazy_mode(void)
+{
+ paravirt_leave_lazy(paravirt_get_lazy_mode());
+ hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
+}
/*G:033
* After that diversion we return to our first native-instruction
int write, si_code;
int fault;
+ /*
+ * We can fault from pretty much anywhere, with unknown IRQ state.
+ */
+ trace_hardirqs_fixup();
+
/* get the address */
address = read_cr2();
unsigned long flags;
siginfo_t info;
+ /*
+ * We can fault from pretty much anywhere, with unknown IRQ state.
+ */
+ trace_hardirqs_fixup();
+
tsk = current;
mm = tsk->mm;
prefetchw(&mm->mmap_sem);
#define RQ_RB_ROOT(dd, rq) (&(dd)->sort_list[rq_data_dir((rq))])
+/*
+ * get the request after `rq' in sector-sorted order
+ */
+static inline struct request *
+deadline_latter_request(struct request *rq)
+{
+ struct rb_node *node = rb_next(&rq->rb_node);
+
+ if (node)
+ return rb_entry_rq(node);
+
+ return NULL;
+}
+
static void
deadline_add_rq_rb(struct deadline_data *dd, struct request *rq)
{
{
const int data_dir = rq_data_dir(rq);
- if (dd->next_rq[data_dir] == rq) {
- struct rb_node *rbnext = rb_next(&rq->rb_node);
-
- dd->next_rq[data_dir] = NULL;
- if (rbnext)
- dd->next_rq[data_dir] = rb_entry_rq(rbnext);
- }
+ if (dd->next_rq[data_dir] == rq)
+ dd->next_rq[data_dir] = deadline_latter_request(rq);
elv_rb_del(RQ_RB_ROOT(dd, rq), rq);
}
deadline_move_request(struct deadline_data *dd, struct request *rq)
{
const int data_dir = rq_data_dir(rq);
- struct rb_node *rbnext = rb_next(&rq->rb_node);
dd->next_rq[READ] = NULL;
dd->next_rq[WRITE] = NULL;
+ dd->next_rq[data_dir] = deadline_latter_request(rq);
- if (rbnext)
- dd->next_rq[data_dir] = rb_entry_rq(rbnext);
-
dd->last_sector = rq->sector + rq->nr_sectors;
/*
/*
* we are not running a batch, find best request for selected data_dir
*/
- if (deadline_check_fifo(dd, data_dir)) {
- /* An expired request exists - satisfy it */
- dd->batching = 0;
+ if (deadline_check_fifo(dd, data_dir) || !dd->next_rq[data_dir]) {
+ /*
+ * A deadline has expired, the last request was in the other
+ * direction, or we have run out of higher-sectored requests.
+ * Start again from the request with the earliest expiry time.
+ */
rq = rq_entry_fifo(dd->fifo_list[data_dir].next);
-
- } else if (dd->next_rq[data_dir]) {
+ } else {
/*
* The last req was the same dir and we have a next request in
* sort order. No expired requests so continue on from here.
*/
rq = dd->next_rq[data_dir];
- } else {
- struct rb_node *node;
- /*
- * The last req was the other direction or we have run out of
- * higher-sectored requests. Go back to the lowest sectored
- * request (1 way elevator) and start a new batch.
- */
- dd->batching = 0;
- node = rb_first(&dd->sort_list[data_dir]);
- if (node)
- rq = rb_entry_rq(node);
}
+ dd->batching = 0;
+
dispatch_request:
/*
* rq is the selected appropriate request.
} /* segments in rq */
if (sg)
- __sg_mark_end(sg);
+ sg_mark_end(sg);
return nsegs;
}
sector_t old_sector;
int ret, nr_sectors = bio_sectors(bio);
dev_t old_dev;
+ int err = -EIO;
might_sleep();
bdevname(bio->bi_bdev, b),
(long long) bio->bi_sector);
end_io:
- bio_endio(bio, -EIO);
+ bio_endio(bio, err);
break;
}
if (bio_check_eod(bio, nr_sectors))
goto end_io;
+ if (bio_empty_barrier(bio) && !q->prepare_flush_fn) {
+ err = -EOPNOTSUPP;
+ goto end_io;
+ }
ret = q->make_request_fn(q, bio);
} while (ret);
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/types.h>
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/errno.h>
-#include <asm/scatterlist.h>
#include <linux/string.h>
#include "internal.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mm.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/types.h>
#include <linux/cryptohash.h>
#include <linux/types.h>
#include <crypto/sha.h>
-#include <asm/scatterlist.h>
#include <asm/byteorder.h>
struct sha1_ctx {
#include <linux/crypto.h>
#include <linux/types.h>
#include <crypto/sha.h>
-#include <asm/scatterlist.h>
#include <asm/byteorder.h>
struct sha256_ctx {
#include <linux/types.h>
#include <crypto/sha.h>
-#include <asm/scatterlist.h>
#include <asm/byteorder.h>
struct sha512_ctx {
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/byteorder.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#include <linux/types.h>
/**
* ata_dev_enable_pm - enable SATA interface power management
- * @device - device to enable ipm for
- * @policy - the link power management policy
+ * @dev: device to enable power management
+ * @policy: the link power management policy
*
* Enable SATA Interface power management. This will enable
* Device Interface Power Management (DIPM) for min_power
return /* rc */; /* hopefully we can use 'rc' eventually */
}
+#ifdef CONFIG_PM
/**
* ata_dev_disable_pm - disable SATA interface power management
- * @device - device to enable ipm for
+ * @dev: device to disable power management
*
* Disable SATA Interface power management. This will disable
* Device Interface Power Management (DIPM) without changing
if (ap->ops->disable_pm)
ap->ops->disable_pm(ap);
}
+#endif /* CONFIG_PM */
void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
ata_port_schedule_eh(ap);
}
+#ifdef CONFIG_PM
static void ata_lpm_enable(struct ata_host *host)
{
struct ata_link *link;
ata_lpm_schedule(ap, ap->pm_policy);
}
}
+#endif /* CONFIG_PM */
/**
dev->max_sectors = ATA_MAX_SECTORS;
}
+ if ((dev->class == ATA_DEV_ATAPI) &&
+ (atapi_command_packet_set(id) == TYPE_TAPE))
+ dev->max_sectors = ATA_MAX_SECTORS_TAPE;
+
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
{
- u32 spd, limit;
+ struct ata_link *host_link = &link->ap->link;
+ u32 limit, target, spd;
+
+ limit = link->sata_spd_limit;
- if (link->sata_spd_limit == UINT_MAX)
- limit = 0;
+ /* Don't configure downstream link faster than upstream link.
+ * It doesn't speed up anything and some PMPs choke on such
+ * configuration.
+ */
+ if (!ata_is_host_link(link) && host_link->sata_spd)
+ limit &= (1 << host_link->sata_spd) - 1;
+
+ if (limit == UINT_MAX)
+ target = 0;
else
- limit = fls(link->sata_spd_limit);
+ target = fls(limit);
spd = (*scontrol >> 4) & 0xf;
- *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4);
+ *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
- return spd != limit;
+ return spd != target;
}
/**
u32 scontrol;
if (sata_scr_read(link, SCR_CONTROL, &scontrol))
- return 0;
+ return 1;
return __sata_set_spd_needed(link, &scontrol);
}
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev;
unsigned int all_err_mask = 0;
int tag, is_io = 0;
u32 serror;
(!is_io && (all_err_mask & ~AC_ERR_DEV)))
ehc->i.action |= ATA_EH_REVALIDATE;
- /* if we have offending qcs and the associated failed device */
+ /* If we have offending qcs and the associated failed device,
+ * perform per-dev EH action only on the offending device.
+ */
if (ehc->i.dev) {
- /* speed down */
- ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io,
- all_err_mask);
-
- /* perform per-dev EH action only on the offending device */
ehc->i.dev_action[ehc->i.dev->devno] |=
ehc->i.action & ATA_EH_PERDEV_MASK;
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}
+ /* consider speeding down */
+ dev = ehc->i.dev;
+ if (!dev && ata_link_max_devices(link) == 1 &&
+ ata_dev_enabled(link->device))
+ dev = link->device;
+
+ if (dev)
+ ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
+
DPRINTK("EXIT\n");
}
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
+ const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts);
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
unsigned int *classes = ehc->classes;
+ unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
int try = 0;
struct ata_device *dev;
- unsigned long deadline;
+ unsigned long deadline, now;
unsigned int tmp_action;
ata_reset_fn_t reset;
unsigned long flags;
+ u32 sstatus;
int rc;
/* about to reset */
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
- if (softreset && (!hardreset || (!(link->flags & ATA_LFLAG_NO_SRST) &&
+ if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
!sata_set_spd_needed(link) &&
!(ehc->i.action & ATA_EH_HARDRESET))))
tmp_action = ATA_EH_SOFTRESET;
"follow-up softreset required "
"but no softreset avaliable\n");
rc = -EINVAL;
- goto out;
+ goto fail;
}
ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
rc = ata_do_reset(link, reset, classes, deadline);
-
- if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN &&
- !(link->flags & ATA_LFLAG_ASSUME_CLASS)) {
- ata_link_printk(link, KERN_ERR,
- "classification failed\n");
- rc = -EINVAL;
- goto out;
- }
}
- /* if we skipped follow-up srst, clear rc */
- if (rc == -EAGAIN)
- rc = 0;
-
- if (rc && rc != -ERESTART && try < ARRAY_SIZE(ata_eh_reset_timeouts)) {
- unsigned long now = jiffies;
-
- if (time_before(now, deadline)) {
- unsigned long delta = deadline - jiffies;
-
- ata_link_printk(link, KERN_WARNING, "reset failed "
- "(errno=%d), retrying in %u secs\n",
- rc, (jiffies_to_msecs(delta) + 999) / 1000);
+ /* -EAGAIN can happen if we skipped followup SRST */
+ if (rc && rc != -EAGAIN)
+ goto fail;
- while (delta)
- delta = schedule_timeout_uninterruptible(delta);
+ /* was classification successful? */
+ if (classify && classes[0] == ATA_DEV_UNKNOWN &&
+ !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
+ if (try < max_tries) {
+ ata_link_printk(link, KERN_WARNING,
+ "classification failed\n");
+ rc = -EINVAL;
+ goto fail;
}
- if (rc == -EPIPE ||
- try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1)
- sata_down_spd_limit(link);
- if (hardreset)
- reset = hardreset;
- goto retry;
+ ata_link_printk(link, KERN_WARNING,
+ "classfication failed, assuming ATA\n");
+ lflags |= ATA_LFLAG_ASSUME_ATA;
}
- if (rc == 0) {
- u32 sstatus;
+ ata_link_for_each_dev(dev, link) {
+ /* After the reset, the device state is PIO 0 and the
+ * controller state is undefined. Reset also wakes up
+ * drives from sleeping mode.
+ */
+ dev->pio_mode = XFER_PIO_0;
+ dev->flags &= ~ATA_DFLAG_SLEEPING;
- ata_link_for_each_dev(dev, link) {
- /* After the reset, the device state is PIO 0
- * and the controller state is undefined.
- * Reset also wakes up drives from sleeping
- * mode.
- */
- dev->pio_mode = XFER_PIO_0;
- dev->flags &= ~ATA_DFLAG_SLEEPING;
+ if (ata_link_offline(link))
+ continue;
- if (ata_link_offline(link))
- continue;
+ /* apply class override and convert UNKNOWN to NONE */
+ if (lflags & ATA_LFLAG_ASSUME_ATA)
+ classes[dev->devno] = ATA_DEV_ATA;
+ else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+ classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
+ else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ classes[dev->devno] = ATA_DEV_NONE;
+ }
- /* apply class override and convert UNKNOWN to NONE */
- if (link->flags & ATA_LFLAG_ASSUME_ATA)
- classes[dev->devno] = ATA_DEV_ATA;
- else if (link->flags & ATA_LFLAG_ASSUME_SEMB)
- classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
- else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
- }
+ /* record current link speed */
+ if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
+ link->sata_spd = (sstatus >> 4) & 0xf;
- /* record current link speed */
- if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
- link->sata_spd = (sstatus >> 4) & 0xf;
+ if (postreset)
+ postreset(link, classes);
- if (postreset)
- postreset(link, classes);
+ /* reset successful, schedule revalidation */
+ ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ehc->i.action |= ATA_EH_REVALIDATE;
- /* reset successful, schedule revalidation */
- ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
- ehc->i.action |= ATA_EH_REVALIDATE;
- }
+ rc = 0;
out:
/* clear hotplug flag */
ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
spin_unlock_irqrestore(ap->lock, flags);
return rc;
+
+ fail:
+ if (rc == -ERESTART || try >= max_tries)
+ goto out;
+
+ now = jiffies;
+ if (time_before(now, deadline)) {
+ unsigned long delta = deadline - now;
+
+ ata_link_printk(link, KERN_WARNING, "reset failed "
+ "(errno=%d), retrying in %u secs\n",
+ rc, (jiffies_to_msecs(delta) + 999) / 1000);
+
+ while (delta)
+ delta = schedule_timeout_uninterruptible(delta);
+ }
+
+ if (rc == -EPIPE || try == max_tries - 1)
+ sata_down_spd_limit(link);
+ if (hardreset)
+ reset = hardreset;
+ goto retry;
}
static int ata_eh_revalidate_and_attach(struct ata_link *link,
{ MEDIUM_POWER, "medium_power" },
};
-const char *ata_scsi_lpm_get(enum link_pm policy)
+static const char *ata_scsi_lpm_get(enum link_pm policy)
{
int i;
blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
}
+ if (dev->flags & ATA_DFLAG_AN)
+ set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
+
if (dev->flags & ATA_DFLAG_NCQ) {
int depth;
*/
void ata_scsi_media_change_notify(struct ata_device *dev)
{
-#ifdef OTHER_AN_PATCHES_HAVE_BEEN_APPLIED
if (dev->sdev)
- scsi_device_event_notify(dev->sdev, SDEV_MEDIA_CHANGE);
-#endif
+ sdev_evt_send_simple(dev->sdev, SDEV_EVT_MEDIA_CHANGE,
+ GFP_ATOMIC);
}
/**
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY),
+ ATA_FLAG_NCQ),
+ SATA_FSL_HOST_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
void __iomem *hcr_base;
void __iomem *ssr_base;
void __iomem *csr_base;
+ int irq;
};
static inline unsigned int sata_fsl_tag(unsigned int tag,
- void __iomem * hcr_base)
+ void __iomem *hcr_base)
{
/* We let libATA core do actual (queue) tag allocation */
pp->cmdslot[tag].prde_fis_len =
cpu_to_le32((num_prde << 16) | (fis_len << 2));
pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
- pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F)));
+ pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
pp->cmdslot[tag].cda,
}
static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
- u32 * ttl, dma_addr_t cmd_desc_paddr)
+ u32 *ttl, dma_addr_t cmd_desc_paddr)
{
struct scatterlist *sg;
unsigned int num_prde = 0;
"s/g len unaligned : 0x%x\n", sg_len);
if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) &&
- !ata_sg_is_last(sg, qc)) {
+ (qc->n_iter + 1 != qc->n_elem)) {
VPRINTK("setting indirect prde\n");
prd_ptr_to_indirect_ext = prd;
prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis);
+ ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
switch (sc_reg_in) {
case SCR_STATUS:
- sc_reg = 0;
- break;
case SCR_ERROR:
- sc_reg = 1;
- break;
case SCR_CONTROL:
- sc_reg = 2;
- break;
case SCR_ACTIVE:
- sc_reg = 3;
+ sc_reg = sc_reg_in;
break;
default:
return -EINVAL;
VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
- iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4));
+ iowrite32(val, ssr_base + (sc_reg * 4));
return 0;
}
switch (sc_reg_in) {
case SCR_STATUS:
- sc_reg = 0;
- break;
case SCR_ERROR:
- sc_reg = 1;
- break;
case SCR_CONTROL:
- sc_reg = 2;
- break;
case SCR_ACTIVE:
- sc_reg = 3;
+ sc_reg = sc_reg_in;
break;
default:
return -EINVAL;
VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
- *val = ioread32((void __iomem *)ssr_base + (sc_reg * 4));
+ *val = ioread32(ssr_base + (sc_reg * 4));
return 0;
}
struct ata_port *ap)
{
struct sata_fsl_port_priv *pp = ap->private_data;
- u8 fis[6 * 4];
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
cd = pp->cmdentry + tag;
- memcpy(fis, &cd->sfis, 6 * 4); /* should we use memcpy_from_io() */
- ata_tf_from_fis(fis, &pp->tf);
+ ata_tf_from_fis(cd->sfis, &pp->tf);
}
static u8 sata_fsl_check_status(struct ata_port *ap)
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
+#ifdef CONFIG_MPC8315_DS
/*
* Workaround for 8315DS board 3gbps link-up issue,
* currently limit SATA port to GEN1 speed
sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
+#endif
return 0;
}
return ata_dev_classify(&tf);
}
-static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class,
+static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u8 *cfis;
u32 Serror;
int i = 0;
- struct ata_queued_cmd qc;
- u8 *buf;
- dma_addr_t dma_address;
- struct scatterlist *sg;
unsigned long start_jiffies;
DPRINTK("in xx_softreset\n");
*/
temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
- if ((!(temp & 0x10)) || ata_port_offline(ap)) {
+ if ((!(temp & 0x10)) || ata_link_offline(link)) {
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
* reached here, we can send a command to the target device
*/
- if (ap->sactive)
- goto skip_srst_do_ncq_error_handling;
-
DPRINTK("Sending SRST/device reset\n");
- ata_tf_init(ap->device, &tf);
- cfis = (u8 *) & pp->cmdentry->cfis;
+ ata_tf_init(link->device, &tf);
+ cfis = (u8 *) &pp->cmdentry->cfis;
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
* command bit of the CCreg
*/
iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
- goto check_device_signature;
-
-skip_srst_do_ncq_error_handling:
-
- VPRINTK("Sending read log ext(10h) command\n");
-
- memset(&qc, 0, sizeof(struct ata_queued_cmd));
- ata_tf_init(ap->device, &tf);
-
- tf.command = ATA_CMD_READ_LOG_EXT;
- tf.lbal = ATA_LOG_SATA_NCQ;
- tf.nsect = 1;
- tf.hob_nsect = 0;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_PIO;
-
- qc.tag = ATA_TAG_INTERNAL;
- qc.scsicmd = NULL;
- qc.ap = ap;
- qc.dev = ap->device;
-
- qc.tf = tf;
- qc.flags |= ATA_QCFLAG_RESULT_TF;
- qc.dma_dir = DMA_FROM_DEVICE;
-
- buf = ap->sector_buf;
- ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
-
- /*
- * Need to DMA-map the memory buffer associated with the command
- */
-
- sg = qc.__sg;
- dma_address = dma_map_single(ap->dev, qc.buf_virt,
- sg->length, DMA_FROM_DEVICE);
-
- sg_dma_address(sg) = dma_address;
- sg_dma_len(sg) = sg->length;
-
- VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
-
- sata_fsl_qc_prep(&qc);
- sata_fsl_qc_issue(&qc);
-
- temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
- if (temp & 0x1) {
- VPRINTK("READ_LOG_EXT_10H issue failed\n");
-
- VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
- ioread32(CQ + hcr_base),
- ioread32(CA + hcr_base), ioread32(CC + hcr_base));
-
- sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
-
- VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
- VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
- VPRINTK("Serror = 0x%x\n", Serror);
- goto err;
- }
-
- iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
-
- check_device_signature:
DPRINTK("SATA FSL : Now checking device signature\n");
*class = ATA_DEV_NONE;
/* Verify if SStatus indicates device presence */
- if (ata_port_online(ap)) {
+ if (ata_link_online(link)) {
/*
* if we are here, device presence has been detected,
* 1st D2H FIS would have been received, but sfis in
return -EIO;
}
-static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
-{
- int retval;
-
- retval = sata_std_hardreset(ap, class, deadline);
-
- DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval);
-
- return retval;
-}
-
static void sata_fsl_error_handler(struct ata_port *ap)
{
DPRINTK("in xx_error_handler\n");
/* perform recovery */
- ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset,
+ ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset,
ata_std_postreset);
}
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_eh_info *ehi = &ap->eh_info;
+ struct ata_link *link = &ap->link;
+ struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, dereg, cereg = 0, SError = 0;
}
/* record error info */
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, link->active_tag);
if (qc) {
sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
static void sata_fsl_host_intr(struct ata_port *ap)
{
+ struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
return;
}
- if (ap->sactive) { /* only true for NCQ commands */
+ if (link->sactive) { /* only true for NCQ commands */
int i;
/* Read command completed register */
qc_active = ioread32(hcr_base + CC);
} else if (ap->qc_active) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, link->active_tag);
DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- ap->active_tag, ioread32(hcr_base + CC));
+ link->active_tag, ioread32(hcr_base + CC));
if (qc) {
sata_fsl_qc_complete(qc);
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sata_fsl_ops = {
- .port_disable = ata_port_disable,
-
.check_status = sata_fsl_check_status,
.check_altstatus = sata_fsl_check_status,
.dev_select = ata_noop_dev_select,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.irq_clear = sata_fsl_irq_clear,
- .irq_on = ata_dummy_irq_on,
- .irq_ack = ata_dummy_irq_ack,
.scr_read = sata_fsl_scr_read,
.scr_write = sata_fsl_scr_write,
static const struct ata_port_info sata_fsl_port_info[] = {
{
.flags = SATA_FSL_HOST_FLAGS,
+ .link_flags = SATA_FSL_HOST_LFLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.udma_mask = 0x7f, /* udma 0-6 */
.port_ops = &sata_fsl_ops,
dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
+ host_priv->irq = irq;
/* allocate host structure */
host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
dev_set_drvdata(&ofdev->dev, NULL);
- irq_dispose_mapping(host->irq);
+ irq_dispose_mapping(host_priv->irq);
iounmap(host_priv->hcr_base);
kfree(host_priv);
VPRINTK("Splitting last PRD.\n");
addr = le32_to_cpu(ap->prd[idx - 1].addr);
- ap->prd[idx - 1].flags_len -= cpu_to_le32(SG_COUNT_ASIC_BUG);
+ ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
addr = addr + len - SG_COUNT_ASIC_BUG;
#include <linux/device.h>
#include <linux/mm.h>
#include <asm/io.h> /* Needed for i386 to build */
-#include <asm/scatterlist.h> /* Needed for i386 to build */
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/slab.h>
dev_priv->gart_info.bus_addr =
dev_priv->pcigart_offset + dev_priv->fb_location;
dev_priv->gart_info.mapping.offset =
- dev_priv->gart_info.bus_addr;
+ dev_priv->pcigart_offset + dev_priv->fb_aper_offset;
dev_priv->gart_info.mapping.size =
dev_priv->gart_info.table_size;
if (ret != 0)
return ret;
- ret = drm_addmap(dev, drm_get_resource_start(dev, 0),
+ dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0);
+ ret = drm_addmap(dev, dev_priv->fb_aper_offset,
drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER,
_DRM_WRITE_COMBINING, &map);
if (ret != 0)
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
+ unsigned long fb_aper_offset;
} drm_radeon_private_t;
typedef struct drm_radeon_buf_priv {
dev_priv->agp_initialized)) {
DRM_ERROR
("Attempt to allocate from uninitialized memory manager.\n");
+ mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
goto err;
}
- /* just to be safe - this will become unnecessary once sglist->address goes away */
- memset(dma->sglist, 0, dma->n_pages * sizeof(*dma->sglist));
+ sg_init_table(dma->sglist, dma->n_pages);
/* fill scatter/gather list with pages */
for (i = 0; i < dma->n_pages; i++) {
#include <linux/types.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
+#include <linux/scatterlist.h>
#include <asm/byteorder.h>
#include <asm/errno.h>
#include <asm/param.h>
-#include <asm/scatterlist.h>
#include <asm/system.h>
#include <asm/types.h>
lhs->seg_boundary_mask =
min_not_zero(lhs->seg_boundary_mask, rhs->seg_boundary_mask);
+ lhs->bounce_pfn = min_not_zero(lhs->bounce_pfn, rhs->bounce_pfn);
+
lhs->no_cluster |= rhs->no_cluster;
}
min_not_zero(rs->seg_boundary_mask,
q->seg_boundary_mask);
+ rs->bounce_pfn = min_not_zero(rs->bounce_pfn, q->bounce_pfn);
+
rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
}
EXPORT_SYMBOL_GPL(dm_set_device_limits);
rs->max_segment_size = MAX_SEGMENT_SIZE;
if (!rs->seg_boundary_mask)
rs->seg_boundary_mask = -1;
+ if (!rs->bounce_pfn)
+ rs->bounce_pfn = -1;
}
int dm_table_add_target(struct dm_table *t, const char *type,
q->hardsect_size = t->limits.hardsect_size;
q->max_segment_size = t->limits.max_segment_size;
q->seg_boundary_mask = t->limits.seg_boundary_mask;
+ q->bounce_pfn = t->limits.bounce_pfn;
if (t->limits.no_cluster)
q->queue_flags &= ~(1 << QUEUE_FLAG_CLUSTER);
else
#include <linux/pci.h>
#include <linux/input.h>
#include <linux/mutex.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
#include <media/v4l2-common.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/leds.h>
-#include <asm/scatterlist.h>
#include <linux/scatterlist.h>
#include <linux/mmc/card.h>
*/
#include <linux/types.h>
-#include <asm/scatterlist.h>
#include <linux/scatterlist.h>
#include <linux/mmc/host.h>
*/
#include <linux/types.h>
-#include <asm/scatterlist.h>
#include <linux/scatterlist.h>
#include <linux/mmc/host.h>
* your option) any later version.
*/
-#include <asm/scatterlist.h>
#include <linux/scatterlist.h>
#include <linux/mmc/host.h>
#include <asm/ip32/ip32_ints.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include "meth.h"
t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
if (cmos->day_alrm) {
- t->time.tm_mday = CMOS_READ(cmos->day_alrm);
+ /* ignore upper bits on readback per ACPI spec */
+ t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
if (!t->time.tm_mday)
t->time.tm_mday = -1;
unsigned long timeout)
{
u64 *crq_as_u64 = (u64 *) &evt_struct->crq;
- int request_status;
+ int request_status = 0;
int rc;
/* If we have exhausted our request limit, just fail this request,
if (request_status < -1)
goto send_error;
/* Otherwise, we may have run out of requests. */
+ /* If request limit was 0 when we started the adapter is in the
+ * process of performing a login with the server adapter, or
+ * we may have run out of requests.
+ */
+ else if (request_status == -1 &&
+ evt_struct->iu.srp.login_req.opcode != SRP_LOGIN_REQ)
+ goto send_busy;
/* Abort and reset calls should make it through.
* Nothing except abort and reset should use the last two
* slots unless we had two or less to begin with.
unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
free_event_struct(&hostdata->pool, evt_struct);
- atomic_inc(&hostdata->request_limit);
+ if (request_status != -1)
+ atomic_inc(&hostdata->request_limit);
return SCSI_MLQUEUE_HOST_BUSY;
send_error:
login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
spin_lock_irqsave(hostdata->host->host_lock, flags);
- /* Start out with a request limit of 1, since this is negotiated in
- * the login request we are just sending
+ /* Start out with a request limit of 0, since this is negotiated in
+ * the login request we are just sending and login requests always
+ * get sent by the driver regardless of request_limit.
*/
- atomic_set(&hostdata->request_limit, 1);
+ atomic_set(&hostdata->request_limit, 0);
rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
spin_unlock_irqrestore(hostdata->host->host_lock, flags);
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
int datadir = scsi_cmnd->sc_data_direction;
+ char tag[2];
lpfc_cmd->fcp_rsp->rspSnsLen = 0;
/* clear task management bits */
memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
- if (scsi_cmnd->device->tagged_supported) {
- switch (scsi_cmnd->tag) {
+ if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
+ switch (tag[0]) {
case HEAD_OF_QUEUE_TAG:
fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
break;
if (aux->frame_type != OS_FRAME_TYPE_DATA &&
aux->frame_type != OS_FRAME_TYPE_EOD &&
aux->frame_type != OS_FRAME_TYPE_MARKER) {
- if (!quiet)
+ if (!quiet) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
#endif
+ }
goto err_out;
}
if (aux->frame_type == OS_FRAME_TYPE_EOD &&
goto err_out;
}
if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
- if (!quiet)
+ if (!quiet) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n",
name, ntohl(aux->frame_seq_num), frame_seq_number);
#endif
+ }
goto err_out;
}
if (aux->frame_type == OS_FRAME_TYPE_MARKER) {
* end-of-list
*/
if (!left)
- sg_mark_end(sgl, this);
+ sg_mark_end(&sgl[this - 1]);
/*
* don't allow subsequent mempool allocs to sleep, it would
}
EXPORT_SYMBOL(scsi_device_set_state);
+/**
+ * sdev_evt_emit - emit a single SCSI device uevent
+ * @sdev: associated SCSI device
+ * @evt: event to emit
+ *
+ * Send a single uevent (scsi_event) to the associated scsi_device.
+ */
+static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
+{
+ int idx = 0;
+ char *envp[3];
+
+ switch (evt->evt_type) {
+ case SDEV_EVT_MEDIA_CHANGE:
+ envp[idx++] = "SDEV_MEDIA_CHANGE=1";
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+
+ envp[idx++] = NULL;
+
+ kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * sdev_evt_thread - send a uevent for each scsi event
+ * @work: work struct for scsi_device
+ *
+ * Dispatch queued events to their associated scsi_device kobjects
+ * as uevents.
+ */
+void scsi_evt_thread(struct work_struct *work)
+{
+ struct scsi_device *sdev;
+ LIST_HEAD(event_list);
+
+ sdev = container_of(work, struct scsi_device, event_work);
+
+ while (1) {
+ struct scsi_event *evt;
+ struct list_head *this, *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_splice_init(&sdev->event_list, &event_list);
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+
+ if (list_empty(&event_list))
+ break;
+
+ list_for_each_safe(this, tmp, &event_list) {
+ evt = list_entry(this, struct scsi_event, node);
+ list_del(&evt->node);
+ scsi_evt_emit(sdev, evt);
+ kfree(evt);
+ }
+ }
+}
+
+/**
+ * sdev_evt_send - send asserted event to uevent thread
+ * @sdev: scsi_device event occurred on
+ * @evt: event to send
+ *
+ * Assert scsi device event asynchronously.
+ */
+void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
+{
+ unsigned long flags;
+
+ if (!test_bit(evt->evt_type, sdev->supported_events)) {
+ kfree(evt);
+ return;
+ }
+
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_add_tail(&evt->node, &sdev->event_list);
+ schedule_work(&sdev->event_work);
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+}
+EXPORT_SYMBOL_GPL(sdev_evt_send);
+
+/**
+ * sdev_evt_alloc - allocate a new scsi event
+ * @evt_type: type of event to allocate
+ * @gfpflags: GFP flags for allocation
+ *
+ * Allocates and returns a new scsi_event.
+ */
+struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
+ gfp_t gfpflags)
+{
+ struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags);
+ if (!evt)
+ return NULL;
+
+ evt->evt_type = evt_type;
+ INIT_LIST_HEAD(&evt->node);
+
+ /* evt_type-specific initialization, if any */
+ switch (evt_type) {
+ case SDEV_EVT_MEDIA_CHANGE:
+ default:
+ /* do nothing */
+ break;
+ }
+
+ return evt;
+}
+EXPORT_SYMBOL_GPL(sdev_evt_alloc);
+
+/**
+ * sdev_evt_send_simple - send asserted event to uevent thread
+ * @sdev: scsi_device event occurred on
+ * @evt_type: type of event to send
+ * @gfpflags: GFP flags for allocation
+ *
+ * Assert scsi device event asynchronously, given an event type.
+ */
+void sdev_evt_send_simple(struct scsi_device *sdev,
+ enum scsi_device_event evt_type, gfp_t gfpflags)
+{
+ struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags);
+ if (!evt) {
+ sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n",
+ evt_type);
+ return;
+ }
+
+ sdev_evt_send(sdev, evt);
+}
+EXPORT_SYMBOL_GPL(sdev_evt_send_simple);
+
/**
* scsi_device_quiesce - Block user issued commands.
* @sdev: scsi device to quiesce.
struct scsi_device *sdev;
int display_failure_msg = 1, ret;
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ extern void scsi_evt_thread(struct work_struct *work);
sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
GFP_ATOMIC);
INIT_LIST_HEAD(&sdev->same_target_siblings);
INIT_LIST_HEAD(&sdev->cmd_list);
INIT_LIST_HEAD(&sdev->starved_entry);
+ INIT_LIST_HEAD(&sdev->event_list);
spin_lock_init(&sdev->list_lock);
+ INIT_WORK(&sdev->event_work, scsi_evt_thread);
sdev->sdev_gendev.parent = get_device(&starget->dev);
sdev->sdev_target = starget;
struct scsi_device *sdev;
struct device *parent;
struct scsi_target *starget;
+ struct list_head *this, *tmp;
unsigned long flags;
sdev = container_of(work, struct scsi_device, ew.work);
list_del(&sdev->starved_entry);
spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ cancel_work_sync(&sdev->event_work);
+
+ list_for_each_safe(this, tmp, &sdev->event_list) {
+ struct scsi_event *evt;
+
+ evt = list_entry(this, struct scsi_event, node);
+ list_del(&evt->node);
+ kfree(evt);
+ }
+
if (sdev->request_queue) {
sdev->request_queue->queuedata = NULL;
/* user context needed to free queue */
}
static DEVICE_ATTR(modalias, S_IRUGO, sdev_show_modalias, NULL);
+#define DECLARE_EVT_SHOW(name, Cap_name) \
+static ssize_t \
+sdev_show_evt_##name(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct scsi_device *sdev = to_scsi_device(dev); \
+ int val = test_bit(SDEV_EVT_##Cap_name, sdev->supported_events);\
+ return snprintf(buf, 20, "%d\n", val); \
+}
+
+#define DECLARE_EVT_STORE(name, Cap_name) \
+static ssize_t \
+sdev_store_evt_##name(struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct scsi_device *sdev = to_scsi_device(dev); \
+ int val = simple_strtoul(buf, NULL, 0); \
+ if (val == 0) \
+ clear_bit(SDEV_EVT_##Cap_name, sdev->supported_events); \
+ else if (val == 1) \
+ set_bit(SDEV_EVT_##Cap_name, sdev->supported_events); \
+ else \
+ return -EINVAL; \
+ return count; \
+}
+
+#define DECLARE_EVT(name, Cap_name) \
+ DECLARE_EVT_SHOW(name, Cap_name) \
+ DECLARE_EVT_STORE(name, Cap_name) \
+ static DEVICE_ATTR(evt_##name, S_IRUGO, sdev_show_evt_##name, \
+ sdev_store_evt_##name);
+#define REF_EVT(name) &dev_attr_evt_##name.attr
+
+DECLARE_EVT(media_change, MEDIA_CHANGE)
+
/* Default template for device attributes. May NOT be modified */
static struct attribute *scsi_sdev_attrs[] = {
&dev_attr_device_blocked.attr,
&dev_attr_iodone_cnt.attr,
&dev_attr_ioerr_cnt.attr,
&dev_attr_modalias.attr,
+ REF_EVT(media_change),
NULL
};
return 0;
}
-static int maple_bus_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int maple_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return 0;
}
#include <linux/device.h>
#include <linux/mm.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/usb.h>
#include <linux/utsname.h>
#include <linux/mm.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/file.h>
#include <linux/namei.h>
#include <asm/uaccess.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/crypto.h>
#include <linux/sched.h>
retry_readpage:
BUG_ON(!PageLocked(page));
+ vi = page->mapping->host;
+ i_size = i_size_read(vi);
+ /* Is the page fully outside i_size? (truncate in progress) */
+ if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT)) {
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ ntfs_debug("Read outside i_size - truncated?");
+ goto done;
+ }
/*
* This can potentially happen because we clear PageUptodate() during
* ntfs_writepage() of MstProtected() attributes.
unlock_page(page);
return 0;
}
- vi = page->mapping->host;
ni = NTFS_I(vi);
/*
* Only $DATA attributes can be encrypted and only unnamed $DATA
* ntfs_mapping_pairs_decompress() fails.
*/
end_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn) + 1;
- if (!a->data.non_resident.lowest_vcn && end_vcn == 1)
- end_vcn = sle64_to_cpu(a->data.non_resident.allocated_size) >>
- ni->vol->cluster_size_bits;
- if (unlikely(vcn >= end_vcn)) {
+ if (unlikely(vcn && vcn >= end_vcn)) {
err = -ENOENT;
goto err_out;
}
read_unlock_irqrestore(&ni->size_lock, flags);
max_page = ((i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT) -
offset;
+ /* Is the page fully outside i_size? (truncate in progress) */
+ if (xpage >= max_page) {
+ kfree(bhs);
+ kfree(pages);
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ ntfs_debug("Compressed read outside i_size - truncated?");
+ SetPageUptodate(page);
+ unlock_page(page);
+ return 0;
+ }
if (nr_pages < max_page)
max_page = nr_pages;
for (i = 0; i < max_page; i++, offset++) {
extern int m8xx_cpm_hostfree(uint start);
extern void m8xx_cpm_hostdump(void);
-extern void cpm_load_patch(volatile immap_t *immr);
+extern void cpm_load_patch(cpm8xx_t *cp);
/* Buffer descriptors used by many of the CPM protocols.
*/
#define SH_CACHE_ASSOC 8
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
#ifndef __ASSEMBLY__
struct cache_info {
#define irq_canonicalize(irq) (irq)
#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
extern void irq_ctx_init(int cpu);
extern void irq_ctx_exit(int cpu);
# define __ARCH_HAS_DO_SOFTIRQ
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT))
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
/* PFN start number, because of __MEMORY_START */
#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
/*
* The following only work if pte_present() is true.
struct cache_info scache; /* Secondary cache */
unsigned long flags;
-} __attribute__ ((aligned(SMP_CACHE_BYTES)));
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
extern struct sh_cpuinfo cpu_data[];
#define boot_cpu_data cpu_data[0]
#ifdef __KERNEL__
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM ((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
int setup_early_printk(char *);
void sh_mv_setup(void);
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
{
- unsigned long s = (unsigned long) vaddr & L1_CACHE_ALIGN_MASK;
- unsigned long e = (vaddr + size) & L1_CACHE_ALIGN_MASK;
+ unsigned long start = (unsigned long) vaddr;
+ unsigned long s = start & L1_CACHE_ALIGN_MASK;
+ unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
for (; s <= e; s += L1_CACHE_BYTES)
asm volatile ("ocbp %0, 0" : : "r" (s));
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned int length;
};
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
#define ISA_DMA_THRESHOLD (0xffffffff)
#endif /* !__ASM_SH64_SCATTERLIST_H */
return raw_irqs_disabled_flags(flags);
}
+
+/*
+ * makes the traced hardirq state match with the machine state
+ *
+ * should be a rarely used function, only in places where its
+ * otherwise impossible to know the irq state, like in traps.
+ */
+static inline void trace_hardirqs_fixup_flags(unsigned long flags)
+{
+ if (raw_irqs_disabled_flags(flags))
+ trace_hardirqs_off();
+ else
+ trace_hardirqs_on();
+}
+
+static inline void trace_hardirqs_fixup(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ trace_hardirqs_fixup_flags(flags);
+}
#endif /* __ASSEMBLY__ */
/*
return raw_irqs_disabled_flags(flags);
}
+/*
+ * makes the traced hardirq state match with the machine state
+ *
+ * should be a rarely used function, only in places where its
+ * otherwise impossible to know the irq state, like in traps.
+ */
+static inline void trace_hardirqs_fixup_flags(unsigned long flags)
+{
+ if (raw_irqs_disabled_flags(flags))
+ trace_hardirqs_off();
+ else
+ trace_hardirqs_on();
+}
+
+static inline void trace_hardirqs_fixup(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ trace_hardirqs_fixup_flags(flags);
+}
/*
* Used in the idle loop; sti takes one instruction cycle
* to complete:
}
/*:*/
-void async_hcall(unsigned long call,
- unsigned long arg1, unsigned long arg2, unsigned long arg3);
-
/* Can't use our min() macro here: needs to be a constant */
#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
ATA_MAX_SECTORS_128 = 128,
ATA_MAX_SECTORS = 256,
ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
+ ATA_MAX_SECTORS_TAPE = 65535,
ATA_ID_WORDS = 256,
ATA_ID_SERNO = 10,
}
}
+static inline int atapi_command_packet_set(const u16 *dev_id)
+{
+ return (dev_id[0] >> 8) & 0x1f;
+}
+
static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
{
return (tf->protocol == ATA_PROT_ATAPI) ||
unsigned short hardsect_size;
unsigned int max_segment_size;
unsigned long seg_boundary_mask;
+ unsigned long bounce_pfn;
unsigned char no_cluster; /* inverted so that 0 is default */
};
int offset;
} both;
};
-int get_futex_key(u32 __user *uaddr, struct rw_semaphore *shared,
- union futex_key *key);
-void get_futex_key_refs(union futex_key *key);
-void drop_futex_key_refs(union futex_key *key);
#ifdef CONFIG_FUTEX
extern void exit_robust_list(struct task_struct *curr);
/**
* sg_mark_end - Mark the end of the scatterlist
- * @sgl: Scatterlist
- * @nents: Number of entries in sgl
+ * @sg: SG entryScatterlist
*
* Description:
- * Marks the last entry as the termination point for sg_next()
+ * Marks the passed in sg entry as the termination point for the sg
+ * table. A call to sg_next() on this entry will return NULL.
*
**/
-static inline void sg_mark_end(struct scatterlist *sgl, unsigned int nents)
+static inline void sg_mark_end(struct scatterlist *sg)
{
- sgl[nents - 1].page_link = 0x02;
-}
-
-static inline void __sg_mark_end(struct scatterlist *sg)
-{
- sg->page_link |= 0x02;
-}
-
-/**
- * sg_init_one - Initialize a single entry sg list
- * @sg: SG entry
- * @buf: Virtual address for IO
- * @buflen: IO length
- *
- * Notes:
- * This should not be used on a single entry that is part of a larger
- * table. Use sg_init_table() for that.
- *
- **/
-static inline void sg_init_one(struct scatterlist *sg, const void *buf,
- unsigned int buflen)
-{
- memset(sg, 0, sizeof(*sg));
#ifdef CONFIG_DEBUG_SG
- sg->sg_magic = SG_MAGIC;
+ BUG_ON(sg->sg_magic != SG_MAGIC);
#endif
- sg_mark_end(sg, 1);
- sg_set_buf(sg, buf, buflen);
+ /*
+ * Set termination bit, clear potential chain bit
+ */
+ sg->page_link |= 0x02;
+ sg->page_link &= ~0x01;
}
/**
static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents)
{
memset(sgl, 0, sizeof(*sgl) * nents);
- sg_mark_end(sgl, nents);
#ifdef CONFIG_DEBUG_SG
{
unsigned int i;
sgl[i].sg_magic = SG_MAGIC;
}
#endif
+ sg_mark_end(&sgl[nents - 1]);
+}
+
+/**
+ * sg_init_one - Initialize a single entry sg list
+ * @sg: SG entry
+ * @buf: Virtual address for IO
+ * @buflen: IO length
+ *
+ * Notes:
+ * This should not be used on a single entry that is part of a larger
+ * table. Use sg_init_table() for that.
+ *
+ **/
+static inline void sg_init_one(struct scatterlist *sg, const void *buf,
+ unsigned int buflen)
+{
+ sg_init_table(sg, 1);
+ sg_set_buf(sg, buf, buflen);
}
/**
#include <linux/crypto.h>
#include <net/xfrm.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#define ESP_NUM_FAST_SG 4
#include <linux/kref.h>
#include <linux/list.h>
#include <linux/rwsem.h>
+#include <linux/scatterlist.h>
#include <asm/atomic.h>
-#include <asm/scatterlist.h>
#include <asm/uaccess.h>
union ib_gid {
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_transport_sas.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
struct block_device;
* to the scsi lld. */
};
+enum scsi_device_event {
+ SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */
+
+ SDEV_EVT_LAST = SDEV_EVT_MEDIA_CHANGE,
+ SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
+};
+
+struct scsi_event {
+ enum scsi_device_event evt_type;
+ struct list_head node;
+
+ /* put union of data structures, for non-simple event types,
+ * here
+ */
+};
+
struct scsi_device {
struct Scsi_Host *host;
struct request_queue *request_queue;
unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
+ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
+ struct list_head event_list; /* asserted events */
+ struct work_struct event_work;
+
unsigned int device_blocked; /* Device returned QUEUE_FULL. */
unsigned int max_device_blocked; /* what device_blocked counts down from */
int retries);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
+extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
+ gfp_t gfpflags);
+extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
+extern void sdev_evt_send_simple(struct scsi_device *sdev,
+ enum scsi_device_event evt_type, gfp_t gfpflags);
extern int scsi_device_quiesce(struct scsi_device *sdev);
extern void scsi_device_resume(struct scsi_device *sdev);
extern void scsi_target_quiesce(struct scsi_target *);
* For other futexes, it points to ¤t->mm->mmap_sem and
* caller must have taken the reader lock. but NOT any spinlocks.
*/
-int get_futex_key(u32 __user *uaddr, struct rw_semaphore *fshared,
- union futex_key *key)
+static int get_futex_key(u32 __user *uaddr, struct rw_semaphore *fshared,
+ union futex_key *key)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
}
return err;
}
-EXPORT_SYMBOL_GPL(get_futex_key);
/*
* Take a reference to the resource addressed by a key.
* Can be called while holding spinlocks.
*
*/
-inline void get_futex_key_refs(union futex_key *key)
+static void get_futex_key_refs(union futex_key *key)
{
if (key->both.ptr == 0)
return;
break;
}
}
-EXPORT_SYMBOL_GPL(get_futex_key_refs);
/*
* Drop a reference to the resource addressed by a key.
* The hash bucket spinlock must not be held.
*/
-void drop_futex_key_refs(union futex_key *key)
+static void drop_futex_key_refs(union futex_key *key)
{
if (!key->both.ptr)
return;
break;
}
}
-EXPORT_SYMBOL_GPL(drop_futex_key_refs);
static u32 cmpxchg_futex_value_locked(u32 __user *uaddr, u32 uval, u32 newval)
{
return 0;
/*
- * Calculate the chain hash: it's the combined has of all the
+ * Calculate the chain hash: it's the combined hash of all the
* lock keys along the dependency chain. We save the hash value
* at every step so that we can get the current hash easily
* after unlock. The chain hash is then used to cache dependency
static void print_rq(struct seq_file *m, struct rq *rq, int rq_cpu)
{
struct task_struct *g, *p;
+ unsigned long flags;
SEQ_printf(m,
"\nrunnable tasks:\n"
"------------------------------------------------------"
"----------------------------------------------------\n");
- read_lock_irq(&tasklist_lock);
+ read_lock_irqsave(&tasklist_lock, flags);
do_each_thread(g, p) {
if (!p->se.on_rq || task_cpu(p) != rq_cpu)
print_task(m, rq, p);
} while_each_thread(g, p);
- read_unlock_irq(&tasklist_lock);
+ read_unlock_irqrestore(&tasklist_lock, flags);
}
void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
return buf - old_buf;
}
-EXPORT_SYMBOL_GPL(access_process_vm);
if (new) {
c = get_cpu_slab(s, smp_processor_id());
- if (c->page) {
- /*
- * Someone else populated the cpu_slab while we
- * enabled interrupts, or we have gotten scheduled
- * on another cpu. The page may not be on the
- * requested node even if __GFP_THISNODE was
- * specified. So we need to recheck.
- */
- if (node_match(c, node)) {
- /*
- * Current cpuslab is acceptable and we
- * want the current one since its cache hot
- */
- discard_slab(s, new);
- slab_lock(c->page);
- goto load_freelist;
- }
- /* New slab does not fit our expectations */
+ if (c->page)
flush_slab(s, c);
- }
slab_lock(new);
SetSlabFrozen(new);
c->page = new;
{
int nsg = __skb_to_sgvec(skb, sg, offset, len);
- __sg_mark_end(&sg[nsg - 1]);
+ sg_mark_end(&sg[nsg - 1]);
return nsg;
}
#include <net/ieee80211.h>
#include <linux/crypto.h>
-#include <asm/scatterlist.h>
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Host AP crypt: CCMP");
#include <linux/spinlock.h>
#include <net/icmp.h>
#include <net/protocol.h>
-#include <asm/scatterlist.h>
/* Clear mutable options and find final destination to substitute
* - Adaptive compression.
*/
#include <linux/module.h>
-#include <asm/scatterlist.h>
#include <asm/semaphore.h>
#include <linux/crypto.h>
#include <linux/pfkeyv2.h>
sg_set_buf(&sg[block++], key->key, key->keylen);
nbytes += key->keylen;
- __sg_mark_end(&sg[block - 1]);
+ sg_mark_end(&sg[block - 1]);
/* Now store the Hash into the packet */
err = crypto_hash_init(desc);
#include <net/ipv6.h>
#include <net/protocol.h>
#include <net/xfrm.h>
-#include <asm/scatterlist.h>
static int zero_out_mutable_opts(struct ipv6_opt_hdr *opthdr)
{
#include <net/ip.h>
#include <net/xfrm.h>
#include <net/ipcomp.h>
-#include <asm/scatterlist.h>
#include <asm/semaphore.h>
#include <linux/crypto.h>
#include <linux/pfkeyv2.h>
sg_set_buf(&sg[block++], key->key, key->keylen);
nbytes += key->keylen;
- __sg_mark_end(&sg[block - 1]);
+ sg_mark_end(&sg[block - 1]);
/* Now store the hash into the packet */
err = crypto_hash_init(desc);
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
-#include <asm/scatterlist.h>
#include <net/mac80211.h>
#include "ieee80211_key.h"
nsg++;
}
- __sg_mark_end(&sg[nsg - 1]);
+ sg_mark_end(&sg[nsg - 1]);
ASSERTCMP(sg[0].length + sg[1].length, ==, buflen);
}
if (thislen == 0)
return 0;
- __sg_mark_end(&desc->infrags[desc->fragno - 1]);
- __sg_mark_end(&desc->outfrags[desc->fragno - 1]);
+ sg_mark_end(&desc->infrags[desc->fragno - 1]);
+ sg_mark_end(&desc->outfrags[desc->fragno - 1]);
ret = crypto_blkcipher_encrypt_iv(&desc->desc, desc->outfrags,
desc->infrags, thislen);
if (thislen == 0)
return 0;
- __sg_mark_end(&desc->frags[desc->fragno - 1]);
+ sg_mark_end(&desc->frags[desc->fragno - 1]);
ret = crypto_blkcipher_decrypt_iv(&desc->desc, desc->frags,
desc->frags, thislen);
#include <linux/jiffies.h>
#include <linux/sunrpc/gss_krb5.h>
#include <linux/random.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#ifdef RPC_DEBUG
#include <linux/sunrpc/gss_krb5.h>
#include <linux/random.h>
#include <linux/pagemap.h>
-#include <asm/scatterlist.h>
#include <linux/crypto.h>
#ifdef RPC_DEBUG
#if defined(CONFIG_INET_ESP) || defined(CONFIG_INET_ESP_MODULE) || defined(CONFIG_INET6_ESP) || defined(CONFIG_INET6_ESP_MODULE)
#include <net/esp.h>
#endif
-#include <asm/scatterlist.h>
/*
* Algorithms supported by IPsec. These entries contain properties which