+++ /dev/null
-# Standard definitions for any NSLU2 Linux kernel.
-# Include this file in a .bb which specifies, at least,
-# PN,PV,PR for the desired kernel
-#
-# Define the following *before* including this file as
-# required:
-#
-# N2K_PATCHES - full list of patches to apply, to add files
-# generate a patch against /dev/null
-# N2K_SUFFIX - the suffix to add after 'zImage-' in the
-# deploy/images directory, should identify the image config
-#
-# DEFAULT_PREFERENCE is set automagically in this file as
-# follows:
-#
-# 10 For *released* kernels
-# 8 For mm or ac patched versions of released kernels
-# 6 For rc patched kernels (release candidates)
-# 4 For mm or ac patched rc (release candidate) kernels
-# 2 For pre or bk versions
-# 0 For mm or ac patched pre or bk versions
-#
-# --------------------------------------------------------------
-#
-# Within this file bitbake variables local to the file are
-# named N2K_FOO
-#
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for the Linksys NSLU2 device"
-LICENSE = "GPL"
-
-DEPENDS += "devio-native"
-
-# Linux kernel source has the general form linux-X.Y.Z-patchP,
-# X.Y is the major version number, Z (which may have multiple
-# parts) is a sub-version and 'patch' is something like 'mm' or
-# 'ac' with a patch version. The original bz2 archive will be
-# in a directory/file vX.Y/linux-X.Y.Z.tar.bz2. The unpacked
-# source will be in the directory linux-X.Y.Z and this directory
-# name corresponds to the module directory (in /lib/modules).
-#
-# The corresponding .bb file should be called:
-#
-# package_X.Y.Z-patchP
-#
-# Giving PN=package PV=X.Y.Z-patchP (and PR is set in the .bb
-# file). Files, including the all important defconfig, are
-# searched for in the following directories (last one first):
-#
-# nslu2-kernel/files
-# nslu2-kernel/X.Y
-# nslu2-kernel/X.Y.Z
-# nslu2-kernel/X.Y.Z-patch
-# nslu2-kernel/X.Y.Z-patchP
-# package-X.Y.Z-patchP
-#
-# This allows sharing of patch files and other useful source!
-# To share a file or patch with an earlier version put it in
-# the shared directory - e.g. to use foo.patch on 2.6.11.2 and
-# 2.6.11.4 it should be in directory nslu2-kernel/2.6.11.
-#
-# Note that when there are multiple patches the X.Y.Z-patch form
-# uses base-patch (e.g. 2.6.12-mm) whereas X.Y.Z-patchP has the
-# full form, for example 2.6.12-rc3-mm1 (in the same case).
-
-#PN=package-name
-#PV=package-version (full)
-
-# The patch has the general form (rcN|preN|acN|mmN|bkN)* with the
-# separate patch items being separated by '-' characters. The
-# rc patch is first and has the important property that it
-# requires the *preceding* kernel base version and that this
-# will be the source directory name.
-python () {
- # The patches list may be empty. This code starts with the base
- # kernel version and steps through the patches. Because the rc and
- # pre patches actually require the *preceding* kernel version the code
- # fixes that up appropriately.
- pv = bb.data.getVar("PV",d,1).split('-')
- kernel = pv[0].split('.')
- base = pv[0]
- name = [base]
- major = '.'.join(name[0].split('.')[0:2])
- minor = '.'.join(name[0].split('.')[0:3])
- patch_uri = [ None ]
- filedir = "${FILE_DIRNAME}/nslu2-kernel/%s"
- # This entry will become the last one (everything is inserted before it)
- filepath = [ filedir % "files" ]
- pref = 10
- mmac = 0
- for patch in pv[1:]:
- name.append(patch)
- pname = '-'.join(name)
- if patch[0:2] == "rc" or patch[0:3] == "pre":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/testing/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
- kernel[-1] = str(int(kernel[-1]) - 1)
- if patch[0:2] == "rc" and pref == 10:
- pref = 6
- filepath[0:0] = [ filedir % name[0] ]
- filepath[0:0] = [ filedir % (name[0] + "-rc") ]
- else:
- pref = 2
- elif patch[0:2] == "bk" or patch[0:3] == "git":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/snapshots/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
- pref = 2
- elif patch[0:2] == "ac":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-%s/%s/patch-%s" % (major, base, pname))
- mmac = 2
- filepath[0:0] = [ filedir % (name[0] + "-ac") ]
- elif patch[0:2] == "mm":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/%s/%s/%s/%s.bz2;patch=1;pname=%s" % (major, base, pname, pname, pname))
- mmac = 2
- filepath[0:0] = [ filedir % (name[0] + "-mm") ]
- else:
- raise bb.build.FuncFailed("nslu2-kernel: patch %s not recognized in %s" % (patch, '-'.join(pv)))
- filepath[0:0] = [ filedir % pname ]
- base = pname
-
- base = '.'.join(kernel)
- patch_uri[0] = "${KERNELORG_MIRROR}/pub/linux/kernel/v%s/linux-%s.tar.bz2" % (major, base)
- filepath[-1:-1] = [ filedir % base ]
- if base != minor:
- filepath[-1:-1] = [ filedir % minor ]
- filepath[-1:-1] = [ filedir % major ]
-
- bb.data.setVar("N2K_SRCMAJ", major, d)
- # bb.note("N2K_SRCMAJ := %s" % major)
- bb.data.setVar("N2K_SRCVER", base, d)
- # bb.note("N2K_SRCVER := %s" % base)
- bb.data.setVar("N2K_SRCURI", ' '.join(patch_uri), d)
- # bb.note("N2K_SRCURI := %s" % ' '.join(patch_uri))
- bb.data.setVar("N2K_FILESPATH", ':'.join(filepath), d)
- # bb.note("N2K_FILESPATH := %s" % ' '.join(filepath))
- bb.data.setVar("DEFAULT_PREFERENCE", pref-mmac, d)
- # bb.note("DEFAULT_PREFERENCE := %s" % (pref-mmac))
-}
-
-# FILESPATH: this list is in order last-searched-first, therefore
-# the first entry is the *latest* and/or most specific
-FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}"
-
-# The working directory will be the 'base' version (which may not be the
-# same as implied by the PV variable because it corresponds to the prior
-# minor version for rc and pre patched versions).
-S = "${WORKDIR}/linux-${N2K_SRCVER}"
-
-# N2K_PATCHES is the list of patches.
-N2K_PATCHES ?= ""
-
-# Image suffix - actually set in conf/machine/nslu2.conf as it is also
-# used by anything which needs to know the name of the generated image.
-# Should be overridden in the distro if patches or defconfig are changed.
-N2K_SUFFIX ?= "nslu2${SITEINFO_ENDIANESS}"
-
-SRC_URI = "${N2K_SRCURI}"
-SRC_URI += "${N2K_PATCHES}"
-SRC_URI += "file://defconfig"
-
-COMPATIBLE_HOST = 'arm.*-linux'
-
-inherit kernel
-
-ARCH = "arm"
-KERNEL_IMAGETYPE = "zImage"
-# To specify the console set KERNEL_CONSOLE in the .bb file.
-# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS
-# contains the things for a specific kernel.
-CMDLINE_KERNEL_OPTIONS ?= "reboot=s"
-CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc"
-# Add distro specific debug (or non-debug) options to this
-CMDLINE_DEBUG ?= ""
-CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}"
-
-# Set EXTRAVERSION and LOCALVERSION to "" so that the kernel version
-# remains pinned to the x.y.z form, also turn off the directory
-# printing which provides almost all the output of an incremental build.
-EXTRA_OEMAKE += "EXTRAVERSION="
-EXTRA_OEMAKE += "LOCALVERSION="
-EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'"
-
-addtask unpacklocal before do_patch after do_unpack
-
-# NOTE: in MM kernel builds the config options (oldconfig, menuconfig
-# and so on) do not allow an option to be overridden, so the following
-# removes the options which must be changed.
-do_configure_prepend() {
- rm -f ${S}/.config
- echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config'
- if test '${SITEINFO_ENDIANESS}' = be
- then
- echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config'
- fi
- if test '${SLUGOS_IMAGESEX}' = big-endian
- then
- echo 'CONFIG_JFFS2_BIG_ENDIAN=y' >>'${S}/.config'
- fi
- if test '${SLUGOS_IMAGESEX}' = little-endian
- then
- echo 'CONFIG_JFFS2_LITTLE_ENDIAN=y' >>'${S}/.config'
- fi
- sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' \
- -e '/CONFIG_JFFS2_NATIVE_ENDIAN=/d' \
- -e '/CONFIG_JFFS2_BIG_ENDIAN=/d' \
- -e '/CONFIG_JFFS2_LITTLE_ENDIAN=/d' \
- '${WORKDIR}/defconfig' >>'${S}/.config'
- rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
- ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
-}
-
-# This function adds the required prefix to the image to deal with two
-# problems:
-#
-# 1) The machine type set by RedBoot is wrong - the type for an ixdp425, not an NSLU2
-# e3a01c02 e3811055
-# 2) For LE kernels it is necessary to prefix change-to-le code to the kernel image:
-# ee110f10 e3c00080 ee010f10
-# and to byte swap the (LE) image to match the BE flash layout
-#
-# The argument to the function is the destination directory
-redboot_fixup_armeb() {
- rm -f "$1".new
- devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
- 'wb 0xe3a01c02,4' \
- 'wb 0xe3811055,4' \
- 'cp$'
- mv "$1".new "$1"
-}
-
-redboot_fixup_arm() {
- rm -f "$1".new
- devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
- 'wb 0xe3a01c02,4' \
- 'wb 0xe3811055,4' \
- 'wb 0xee110f10,4' \
- 'wb 0xe3c00080,4' \
- 'wb 0xee010f10,4' \
- 'xp $,4' || {
- echo 'ERROR: arch/${ARCH}/boot/${KERNEL_IMAGETYPE}: failed to byteswap zImage' >&2
- return 1
- }
- mv "$1".new "$1"
-}
-
-do_install_append() {
- redboot_fixup '${STAGING_KERNEL_DIR}/${KERNEL_IMAGETYPE}'
-}
-
-do_deploy[dirs] = "${S}"
-do_deploy() {
- install -d ${DEPLOY_DIR_IMAGE}
- redboot_fixup '${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${N2K_SUFFIX}'
-}
-
-addtask deploy before do_build after do_compile
-
-COMPATIBLE_MACHINE = "nslu2"
+++ /dev/null
---- linux-2.6.11/arch/arm/kernel/setup.c.orig Mon Mar 7 09:41:40 2005
-+++ linux-2.6.11/arch/arm/kernel/setup.c Mon Mar 7 09:42:15 2005
-@@ -431,8 +431,10 @@
- rd_prompt = prompt;
- rd_doload = doload;
-
-+#if 0 /* rd_size is not exported by 2.6.11-mm1 */
- if (rd_sz)
- rd_size = rd_sz;
-+#endif
- #endif
- }
-
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-mm4
-# Sat May 7 11:48:09 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_ARCH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-CONFIG_DMABOUNCE=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMB_INTERWORK is not set
-# CONFIG_ARCH_XSCALE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# General setup
-#
-CONFIG_PCI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# At least one math emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_PM is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_KGDBOE is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_ISCSI_IF is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISER4_FS=m
-# CONFIG_REISER4_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 21:36:10.656270448 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 23:39:18.967076480 -0800
-@@ -467,19 +467,15 @@
- return 0;
- }
-
--#define FORMAT40_ROOT_LOCALITY 41
--#define FORMAT40_ROOT_OBJECTID 42
-+#define FORMAT40_ROOT_LOCALITY 41ull
-+#define FORMAT40_ROOT_OBJECTID 42ull
-
- /* plugin->u.format.root_dir_key */
- reiser4_internal const reiser4_key *
- root_dir_key_format40(const struct super_block *super UNUSED_ARG)
- {
- static const reiser4_key FORMAT40_ROOT_DIR_KEY = {
-- .el = {{(FORMAT40_ROOT_LOCALITY << 4) | KEY_SD_MINOR},
--#if REISER4_LARGE_KEY
-- {0ull},
--#endif
-- {FORMAT40_ROOT_OBJECTID}, {0ull}}
-+ .el = { KEY_INIT(KEY_SD_MINOR,FORMAT40_ROOT_LOCALITY,0ull,0,FORMAT40_ROOT_OBJECTID,0ull) }
- };
-
- return &FORMAT40_ROOT_DIR_KEY;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:00.618253096 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:02.747929336 -0800
-@@ -49,7 +49,7 @@
- /* 70 */ d16 formatting_policy;
- /* 72 */ d64 flags;
- /* 72 */ char not_used[432];
--} format40_disk_super_block;
-+} PACKED64 format40_disk_super_block;
-
- /* format 40 specific part of reiser4_super_info_data */
- typedef struct format40_super_info {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:00.625252032 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:02.747929336 -0800
-@@ -240,14 +240,14 @@
- typedef struct flow_header {
- d32 fl_magic;
- d16 fl_nr; /* number of subfiles in the flow */
--};
-+} PACKED32;
-
- typedef struct subfile_header {
- d32 sh_magic; /* subfile magic */
- d16 sh_type; /* type of subfile: light-weight, ordinary, invert */
- d16 sh_arg_len; /* lenght of lookup argument (filename, key) */
- d32 sh_body_len; /* lenght of subfile body */
--};
-+} PACKED32;
-
- /* functions to get/set fields of flow header */
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:24:00.648248536 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:34:27.331978128 -0800
-@@ -19,6 +19,38 @@
-
- /* see static_stat.h for explanation */
-
-+/* compile time verify of the data structure sizes and alignments */
-+static inline void
-+r4static_stat_verify(void)
-+{
-+ /* All these structures are PACKED, so the __alignof__ should
-+ * be 1. The sizes need to be correct as they map to disk
-+ * structures.
-+ */
-+ cassert(sizeof (reiser4_stat_data_base) == 2);
-+ /* cassert(sizeof (reiser4_light_weight_stat) == 16);
-+ * 14 bytes, comments in code do not take into account PACKED!
-+ */
-+ cassert(sizeof (reiser4_light_weight_stat) == 14);
-+ cassert(sizeof (reiser4_unix_stat) == 28);
-+ cassert(sizeof (reiser4_symlink_stat) == 0);
-+ cassert(sizeof (reiser4_plugin_slot) == 4);
-+ cassert(sizeof (reiser4_plugin_stat) == 2);
-+ cassert(sizeof (reiser4_flags_stat) == 4);
-+ /* cassert(sizeof (reiser4_capabilities_stat) == 16);
-+ * comments in the file look wrong - capabilities are 2 x d32
-+ * not 2 x d64 in the declaration.
-+ */
-+ cassert(sizeof (reiser4_capabilities_stat) == 8);
-+ cassert(sizeof (reiser4_cluster_stat) == 1);
-+ cassert(sizeof (reiser4_crypto_stat) == 2);
-+ /* cassert(sizeof (reiser4_large_times_stat) == 24);
-+ * should be 12 bytes - 3 x d32, probably a bug in the def in
-+ * the header file (meant to be 3 x d64?)
-+ */
-+ cassert(sizeof (reiser4_large_times_stat) == 12);
-+}
-+
- /* helper function used while we are dumping/loading inode/plugin state
- to/from the stat-data. */
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:00.629251424 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:02.749929032 -0800
-@@ -26,7 +26,7 @@
- obj_key_id id;
- /* file name. Null terminated string. */
- d8 name[0];
--} directory_entry_format;
-+} PACKEDt(obj_key_id) directory_entry_format;
-
- void print_de(const char *prefix, coord_t * coord);
- int extract_key_de(const coord_t * coord, reiser4_key * key);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:00.632250968 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:02.750928880 -0800
-@@ -15,12 +15,12 @@
- typedef struct cde_unit_header {
- de_id hash;
- d16 offset;
--} cde_unit_header;
-+} PACKEDt2(de_id,d16) cde_unit_header;
-
- typedef struct cde_item_format {
- d16 num_of_entries;
- cde_unit_header entry[0];
--} cde_item_format;
-+} PACKEDt2(d16,cde_unit_header) cde_item_format;
-
- typedef struct cde_entry {
- const struct inode *dir;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:13.758284416 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:30.786695704 -0800
-@@ -7,7 +7,7 @@
- typedef struct {
- reiser4_dblock_nr start;
- reiser4_dblock_nr width;
--} reiser4_extent;
-+} PACKED64 reiser4_extent;
-
- typedef struct extent_stat {
- int unallocated_units;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/internal.h 2005-03-27 21:33:08.971890672 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/internal.h 2005-03-27 22:15:43.290575208 -0800
-@@ -13,7 +13,7 @@
- typedef struct internal_item_layout {
- /* 0 */ reiser4_dblock_nr pointer;
- /* 4 */
--} internal_item_layout;
-+} PACKED64 internal_item_layout;
-
- struct cut_list;
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:00.646248840 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:02.750928880 -0800
-@@ -26,7 +26,7 @@
- obj_key_id id;
- /* file name. Null terminated string. */
- d8 name[0];
--} directory_entry_format;
-+} PACKEDt(obj_key_id) directory_entry_format;
-
- void print_de(const char *prefix, coord_t * coord);
- int extract_key_de(const coord_t * coord, reiser4_key * key);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node40.c 2005-03-27 21:24:00.654247624 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/node/node40.c 2005-03-27 21:35:08.677692624 -0800
-@@ -32,6 +32,22 @@
- magic (32)
- flush_time (32)
- */
-+/* compile time verify of the data structure sizes and alignments */
-+static inline void
-+r4node40_stat_verify(void)
-+{
-+ /* The alignment of these structures is intended to be '1', but
-+ * it doesn't matter so long as the size is right.
-+ */
-+ cassert(sizeof (common_node_header) == 2);
-+ cassert(sizeof (node40_header) == 28);
-+#if REISER4_LARGE_KEY
-+ cassert(sizeof (item_header40) == 38);
-+#else
-+ cassert(sizeof (item_header40) == 30);
-+#endif
-+}
-+
- /* NIKITA-FIXME-HANS: I told you guys not less than 10 times to not call it r4fs. Change to "ReIs". */
- /* magic number that is stored in ->magic field of node header */
- static const __u32 REISER4_NODE_MAGIC = 0x52344653; /* (*(__u32 *)"R4FS"); */
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:00.656247320 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:02.753928424 -0800
-@@ -250,7 +250,7 @@
- /* identifier of node plugin. Must be located at the very beginning
- of a node. */
- d16 plugin_id;
--} common_node_header;
-+} PACKED16 common_node_header;
-
- /* __REISER4_NODE_H__ */
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/debug.c 2005-03-27 21:24:00.563261456 -0800
-+++ linux-2.6.11/fs/reiser4/debug.c 2005-03-27 23:27:58.569512632 -0800
-@@ -75,6 +75,72 @@
- va_list args;
-
- /*
-+ * this is here to make sure that we don't compile code which we
-+ * know a-priori will panic, or fail without panicing, since this
-+ * compiles first if you find a duplicate case label error then
-+ * you need to rewrite this code to match your compiler.
-+ */
-+ cassert(sizeof (d8) == 1);
-+ cassert(__alignof__ (d8) == 1);
-+ {
-+ struct {
-+ __u8 pad;
-+ d8 data;
-+ } PACKED8 test;
-+ cassert(sizeof test == 2);
-+ cassert(sizeof test.data == 1);
-+ cassert(__alignof__ test.data == 1);
-+ cassert(__alignof__ test == 1);
-+ }
-+ cassert(sizeof (d16) == 2);
-+ cassert(__alignof__ (d16) == 2);
-+ {
-+ struct {
-+ __u8 pad;
-+ d16 data;
-+ } PACKED16 test;
-+ cassert(sizeof test == 4);
-+ cassert(sizeof test.data == 2);
-+#if !__arm__
-+ cassert(__alignof__ test.data == 2);
-+#endif
-+ cassert(__alignof__ test == 2);
-+#if !__arm__
-+ cassert(test.data.datum - &test.pad == 2);
-+#endif
-+ }
-+ cassert(sizeof (d32) == 4);
-+ cassert(__alignof__ (d32) == 4);
-+ {
-+ struct {
-+ __u8 pad;
-+ d32 data;
-+ } PACKED32 test;
-+ cassert(sizeof test == 8);
-+ cassert(sizeof test.data == 4);
-+ cassert(__alignof__ test.data == 4);
-+ cassert(__alignof__ test == 4);
-+ cassert(test.data.datum - &test.pad == 4);
-+ }
-+ cassert(sizeof (d64) == 8);
-+ cassert(__alignof__ (d64) == 8);
-+ {
-+ struct {
-+ __u8 pad;
-+ d64 data;
-+ } PACKED64 test;
-+ cassert(sizeof test == 16);
-+ cassert(sizeof test.data == 8);
-+ cassert(__alignof__ test.data == 8);
-+ cassert(__alignof__ test == 8);
-+ cassert(test.data.datum - &test.pad == 8);
-+ }
-+
-+ /* This is just a test of a struct with a single d64 element. */
-+ cassert(sizeof (reiser4_dblock_nr) == 8);
-+ cassert(__alignof__(reiser4_dblock_nr) == 8);
-+
-+ /*
- * check for recursive panic.
- */
- if (in_panic == 0) {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/flush_queue.c 2005-03-27 21:24:00.577259328 -0800
-+++ linux-2.6.11/fs/reiser4/flush_queue.c 2005-03-27 21:24:02.755928120 -0800
-@@ -447,7 +447,7 @@
-
- /* If all write requests registered in this "fq" are done we up
- * the semaphore. */
-- if (atomic_sub_and_test(bio->bi_vcnt, &fq->nr_submitted))
-+ if (atomic_sub_return(bio->bi_vcnt, &fq->nr_submitted) == 0)
- up(&fq->io_sem);
- }
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/key.c 2005-03-27 22:42:43.481268784 -0800
-+++ linux-2.6.11/fs/reiser4/key.c 2005-03-27 23:42:53.958392832 -0800
-@@ -13,10 +13,10 @@
- independent of key scheme. */
- static const reiser4_key MINIMAL_KEY = {
- .el = {
-- {0ull},
-- ON_LARGE_KEY({0ull},)
-- {0ull},
-- {0ull}
-+ {{0,0,0,0,0,0,0,0}},
-+ ON_LARGE_KEY({{0,0,0,0,0,0,0,0}},)
-+ {{0,0,0,0,0,0,0,0}},
-+ {{0,0,0,0,0,0,0,0}}
- }
- };
-
-@@ -24,10 +24,10 @@
- independent of key scheme. */
- static const reiser4_key MAXIMAL_KEY = {
- .el = {
-- {~0ull},
-- ON_LARGE_KEY({~0ull},)
-- {~0ull},
-- {~0ull}
-+ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
-+ ON_LARGE_KEY({{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},)
-+ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
-+ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}}
- }
- };
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/safe_link.c 2005-03-27 21:24:00.677244128 -0800
-+++ linux-2.6.11/fs/reiser4/safe_link.c 2005-03-27 21:24:02.756927968 -0800
-@@ -61,7 +61,7 @@
- reiser4_key sdkey; /* key of stat-data for the file safe-link is
- * for */
- d64 size; /* size to which file should be truncated */
--} safelink_t;
-+} PACKEDt2(reiser4_key, d64) safelink_t;
-
- /*
- * locality where safe-link items are stored. Next to the objectid of root
---- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.c 2005-03-27 21:24:00.682243368 -0800
-+++ linux-2.6.11/fs/reiser4/status_flags.c 2005-03-27 21:24:02.756927968 -0800
-@@ -153,6 +153,7 @@
- &statuspage->stacktrace[no])
-
- GETFRAME(0);
-+#ifndef __arm__
- GETFRAME(1);
- GETFRAME(2);
- GETFRAME(3);
-@@ -162,6 +163,7 @@
- GETFRAME(7);
- GETFRAME(8);
- GETFRAME(9);
-+#endif
-
- #undef GETFRAME
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/dformat.h 2005-03-27 21:24:00.564261304 -0800
-+++ linux-2.6.11/fs/reiser4/dformat.h 2005-03-27 23:29:03.223683704 -0800
-@@ -28,43 +28,84 @@
-
- /* code on-disk data-types as structs with a single field
- to rely on compiler type-checking. Like include/asm-i386/page.h */
-+/* This code did not work on the arm with gcc 3.4.3 because the
-+ * arm has a minimum structure size of 4 - packed is necessary to
-+ * allow these types to be smaller than 4 - and because this version
-+ * of gcc 'loses' the alignment if the structure contains just one
-+ * element of alignment 8 (or probably any value greater than 4).
-+ * To fix this and to make the code much more portable all the basic
-+ * types are now just done as arrays of bytes - __u8.
-+ *
-+ * This is highly tricky, however the check code in debug.c should
-+ * fire a compile time assert if it goes wrong.
-+ */
-+#if __arm__
-+#define PACKED8 __attribute__ ((packed,aligned(1)))
-+/* Warning: the presence of the packed attribute here means that any
-+ * d16 in a structure so marked will lose its alignment. That doesn't
-+ * seem to matter because there don't seem to be any d16's with odd
-+ * structure offsets, but it might.
-+ */
-+#define PACKED16 __attribute__ ((packed,aligned(2)))
-+#define PACKED32 __attribute__ ((aligned(4)))
-+#define PACKED64 __attribute__ ((aligned(8)))
-+#else
-+#define PACKED8 __attribute__ ((aligned(1)))
-+#define PACKED16 __attribute__ ((aligned(2)))
-+#define PACKED32 __attribute__ ((aligned(4)))
-+#define PACKED64 __attribute__ ((aligned(8)))
-+#endif
- typedef struct d8 {
-- __u8 datum;
--} d8 __attribute__ ((aligned(1)));
-+ __u8 datum[1];
-+} PACKED8 d8;
- typedef struct d16 {
-- __u16 datum;
--} d16 __attribute__ ((aligned(2)));
-+ __u8 datum[2];
-+} PACKED16 d16;
- typedef struct d32 {
-- __u32 datum;
--} d32 __attribute__ ((aligned(4)));
-+ __u8 datum[4];
-+} PACKED32 d32;
- typedef struct d64 {
-- __u64 datum;
--} d64 __attribute__ ((aligned(8)));
-+ __u8 datum[8];
-+} PACKED64 d64;
-
-+#define PACKEDt(t) __attribute__ ((packed,aligned(__alignof__ (t)) ))
-+#define PACKEDt2(t1,t2) __attribute__ ((packed,aligned(\
-+ __alignof__ (t1) < __alignof__ (t2) ? __alignof__ (t2) : __alignof__ (t1) )))
- #define PACKED __attribute__((packed))
-
- static inline __u8
- d8tocpu(const d8 * ondisk /* on-disk value to convert */ )
- {
-- return ondisk->datum;
-+ return ondisk->datum[0];
- }
-
- static inline __u16
- d16tocpu(const d16 * ondisk /* on-disk value to convert */ )
- {
-- return __le16_to_cpu(get_unaligned(&ondisk->datum));
-+ return ondisk->datum[0] + (ondisk->datum[1] << 8);
- }
-
- static inline __u32
- d32tocpu(const d32 * ondisk /* on-disk value to convert */ )
- {
-- return __le32_to_cpu(get_unaligned(&ondisk->datum));
-+ return ondisk->datum[0] +
-+ (ondisk->datum[1] << 8) +
-+ (ondisk->datum[2] << 16) +
-+ (ondisk->datum[3] << 24);
- }
-
- static inline __u64
- d64tocpu(const d64 * ondisk /* on-disk value to convert */ )
- {
-- return __le64_to_cpu(get_unaligned(&ondisk->datum));
-+ __u32 low = ondisk->datum[0] +
-+ (ondisk->datum[1] << 8) +
-+ (ondisk->datum[2] << 16) +
-+ (ondisk->datum[3] << 24);
-+ __u64 high = ondisk->datum[4] +
-+ (ondisk->datum[5] << 8) +
-+ (ondisk->datum[6] << 16) +
-+ (ondisk->datum[7] << 24);
-+ return low + (high << 32);
- }
-
- static inline d8 *
-@@ -72,7 +113,7 @@
- d8 * ondisk /* result */ )
- {
- assert("nikita-1264", oncpu < 0x100);
-- put_unaligned(oncpu, &ondisk->datum);
-+ ondisk->datum[0] = oncpu;
- return ondisk;
- }
-
-@@ -81,7 +122,8 @@
- d16 * ondisk /* result */ )
- {
- assert("nikita-1265", oncpu < 0x10000);
-- put_unaligned(__cpu_to_le16(oncpu), &ondisk->datum);
-+ ondisk->datum[0] = oncpu;
-+ ondisk->datum[1] = oncpu >> 8;
- return ondisk;
- }
-
-@@ -89,15 +131,27 @@
- cputod32(__u32 oncpu /* CPU value to convert */ ,
- d32 * ondisk /* result */ )
- {
-- put_unaligned(__cpu_to_le32(oncpu), &ondisk->datum);
-+ ondisk->datum[0] = oncpu; oncpu >>= 8;
-+ ondisk->datum[1] = oncpu; oncpu >>= 8;
-+ ondisk->datum[2] = oncpu; oncpu >>= 8;
-+ ondisk->datum[3] = oncpu;
- return ondisk;
- }
-
- static inline d64 *
--cputod64(__u64 oncpu /* CPU value to convert */ ,
-+cputod64(__u64 oncpuIn /* CPU value to convert */ ,
- d64 * ondisk /* result */ )
- {
-- put_unaligned(__cpu_to_le64(oncpu), &ondisk->datum);
-+ __u32 oncpu = oncpuIn;
-+ ondisk->datum[0] = oncpu; oncpu >>= 8;
-+ ondisk->datum[1] = oncpu; oncpu >>= 8;
-+ ondisk->datum[2] = oncpu; oncpu >>= 8;
-+ ondisk->datum[3] = oncpu;
-+ oncpu = oncpuIn >> 32;
-+ ondisk->datum[4] = oncpu; oncpu >>= 8;
-+ ondisk->datum[5] = oncpu; oncpu >>= 8;
-+ ondisk->datum[6] = oncpu; oncpu >>= 8;
-+ ondisk->datum[7] = oncpu;
- return ondisk;
- }
-
-@@ -111,7 +165,7 @@
- /* data-type for block number on disk, disk format */
- union reiser4_dblock_nr {
- d64 blk;
--};
-+} PACKED64;
-
- static inline reiser4_block_nr
- dblock_to_cpu(const reiser4_dblock_nr * dblock)
-@@ -148,7 +202,7 @@
- char uuid[16]; /* unique id */
- char label[16]; /* filesystem label */
- d64 diskmap; /* location of the diskmap. 0 if not present */
--} reiser4_master_sb;
-+} PACKED64 reiser4_master_sb;
-
- /* __FS_REISER4_DFORMAT_H__ */
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/kassign.h 2005-03-27 21:24:00.588257656 -0800
-+++ linux-2.6.11/fs/reiser4/kassign.h 2005-03-27 21:24:02.757927816 -0800
-@@ -46,7 +46,7 @@
- d8 locality[sizeof (__u64)];
- ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
- d8 objectid[sizeof (__u64)];
--} obj_key_id;
-+} PACKED8 obj_key_id;
-
- /* Information sufficient to uniquely identify directory entry within
- compressed directory item.
-@@ -57,7 +57,7 @@
- ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
- d8 objectid[sizeof (__u64)];
- d8 offset[sizeof (__u64)];
--} de_id;
-+} PACKED8 de_id;
-
- extern int inode_onwire_size(const struct inode *obj);
- extern char *build_inode_onwire(const struct inode *obj, char *area);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/key.h 2005-03-27 21:24:00.591257200 -0800
-+++ linux-2.6.11/fs/reiser4/key.h 2005-03-27 23:41:07.744539792 -0800
-@@ -106,7 +106,7 @@
- union reiser4_key {
- d64 el[KEY_LAST_INDEX];
- int pad;
--};
-+} PACKED64;
-
- /* bitmasks showing where within reiser4_key particular key is
- stored. */
-@@ -138,6 +138,20 @@
- KEY_ORDERING_SHIFT = 0,
- } reiser4_key_field_shift;
-
-+/* initialise a key, this is a compile time constant initialiser expressed as
-+ * three or four (as appropriate) 8 byte initialisers, there are braces around
-+ * each 8 byte quantity but not around the whole initializer.
-+ */
-+#define KEY_INIT(type,loc,order,band,oid,off)\
-+{{ (0xf&(type))+(0xf0&((loc) << 4)), 0xff&((loc) >> 4), 0xff&((loc) >> 12), 0xff&((loc) >> 20),\
-+ 0xff&((loc) >> 28), 0xff&((loc) >> 36), 0xff&((loc) >> 44), 0xff&((loc) >> 52) }},\
-+ON_LARGE_KEY({{ 0xff&(order), 0xff&((order)>>8), 0xff&((order)>>16), 0xff&((order)>>24),\
-+ 0xff&((order)>>32), 0xff&((order)>>40), 0xff&((order)>>48), 0xff&((order)>>56) }},)\
-+{{ 0xff&(oid), 0xff&((oid)>>8), 0xff&((oid)>>16), 0xff&((oid)>>24),\
-+ 0xff&((oid)>>32), 0xff&((oid)>>40), 0xff&((oid)>>48), (0xf&((oid)>>56))+(0xf0&((band)<<4))}},\
-+{{ 0xff&(off), 0xff&((off)>>8), 0xff&((off)>>16), 0xff&((off)>>24),\
-+ 0xff&((off)>>32), 0xff&((off)>>40), 0xff&((off)>>48), 0xff&((off)>>56) }}
-+
- static inline __u64
- get_key_el(const reiser4_key * key, reiser4_key_field_index off)
- {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.h 2005-03-27 21:24:00.682243368 -0800
-+++ linux-2.6.11/fs/reiser4/status_flags.h 2005-03-27 21:24:02.758927664 -0800
-@@ -33,7 +33,7 @@
- last sector where io error happened if status is "io error encountered" */
- d64 stacktrace[10]; /* Last ten functional calls made (addresses)*/
- char texterror[REISER4_TEXTERROR_LEN]; /* Any error message if appropriate, otherwise filled with zeroes */
--};
-+} PACKED64;
-
- int reiser4_status_init(reiser4_block_nr block);
- int reiser4_status_query(u64 *status, u64 *extended);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/wander.h 2005-03-27 21:24:00.709239264 -0800
-+++ linux-2.6.11/fs/reiser4/wander.h 2005-03-27 22:14:59.663207576 -0800
-@@ -19,7 +19,7 @@
- struct journal_header {
- /* last written transaction head location */
- d64 last_committed_tx;
--};
-+} PACKED64;
-
- typedef struct journal_location {
- reiser4_block_nr footer;
-@@ -46,7 +46,7 @@
- super block */
- d64 nr_files;
- d64 next_oid;
--};
-+} PACKED64;
-
- /* Each wander record (except the first one) has unified format with wander
- record header followed by an array of log entries */
-@@ -66,7 +66,7 @@
-
- /* number of previous block in commit */
- d64 next_block;
--};
-+} PACKED64;
-
- /* The first wander record (transaction head) of written transaction has the
- special format */
-@@ -98,7 +98,7 @@
- separately from super block */
- d64 nr_files;
- d64 next_oid;
--};
-+} PACKED64;
-
- /* A transaction gets written to disk as a set of wander records (each wander
- record size is fs block) */
-@@ -108,7 +108,7 @@
- struct wander_entry {
- d64 original; /* block original location */
- d64 wandered; /* block wandered location */
--};
-+} PACKED64;
-
- /* REISER4 JOURNAL WRITER FUNCTIONS */
-
+++ /dev/null
---- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005
-+++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005
-@@ -139,7 +139,6 @@
- };
-
- static struct i2c_client x1205_i2c_client = {
-- .id = I2C_DRIVERID_X1205,
- .flags = 0,
- .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit
- .adapter = NULL, // the adapter we sit on assigned in attach
-@@ -301,7 +300,6 @@
- int errno;
-
- x1205_i2c_client.adapter = adapter;
-- x1205_i2c_client.id++;
-
- if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver
- return -EIO;
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Sat Jun 18 17:17:09 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_ARCH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMB_INTERWORK is not set
-# CONFIG_ARCH_XSCALE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- linux-2.6.12.2/drivers/usb/core/hub.c.bak 2005-09-19 20:29:14.000000000 +0000
-+++ linux-2.6.12.2/drivers/usb/core/hub.c 2005-09-19 20:30:44.000000000 +0000
-@@ -1026,6 +1026,19 @@
-
- dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
-
-+ // --- Forward-Ported Linksys Disk 1 & Disk 2 LED Control (Port done 16.Sept.05 by Philipp Kirchhofer) ---
-+ // Copy & paste from nslu2-io.c
-+ #define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+ #define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+ // Copy & Paste end
-+
-+ if (*udev->devpath == 0x31) {
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
-+ } else if (*udev->devpath == 0x32) {
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
-+ }
-+ // --- End LED Control ---
-+
- /* Free up all the children before we remove this device */
- for (i = 0; i < USB_MAXCHILDREN; i++) {
- if (udev->children[i])
-@@ -2175,6 +2188,19 @@
- udev->bus->controller->driver->name,
- udev->devnum);
-
-+ // --- Start LED Control ---
-+ // Copy & paste from nslu2-io.c
-+ #define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+ #define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+ // Copy & Paste end
-+
-+ if (*udev->devpath == 0x31) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON;
-+ } else if (*udev->devpath == 0x32) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON;
-+ }
-+ // --- End LED Control ---
-+
- /* Set up TT records, if needed */
- if (hdev->tt) {
- udev->tt = hdev->tt;
---- linux-2.6.12.2/drivers/usb/storage/transport.c.bak 2005-09-19 20:29:25.000000000 +0000
-+++ linux-2.6.12.2/drivers/usb/storage/transport.c 2005-09-19 20:29:55.000000000 +0000
-@@ -60,6 +60,60 @@
- #include "scsiglue.h"
- #include "debug.h"
-
-+// --- Forward-Ported Linksys Disk 1 & Disk 2 LED Activity Blinking Part 1 (Port done 16.Sept.05 by Philipp Kirchhofer) ---
-+// Copy & Paste from nslu2-io.c
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+// Copy & Paste End
-+
-+#define JIFFIES_BLINKING_TIME 6
-+#define ON_LED_INTERVAL 3
-+unsigned long turn_on_time;
-+
-+static struct timer_list usb1_led_timer; /* ide led switch */
-+static struct timer_list usb2_led_timer; /* ide led switch */
-+
-+// Turns on Disk 1 LED
-+static void turn_on_led_usb1(unsigned long ptr) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; // 0xfff7
-+ return;
-+}
-+
-+// Turns on Disk 2 LED
-+static void turn_on_led_usb2(unsigned long ptr) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; // 0xfffb
-+ return;
-+}
-+
-+// Turns on Disk 1 LED after ON_LED_INTERVAL jiffies
-+static void usb_1_led_timer(void) {
-+ usb1_led_timer.expires = jiffies + ON_LED_INTERVAL;
-+ add_timer(&usb1_led_timer);
-+ return;
-+}
-+
-+// Turns on Disk 2 LED after ON_LED_INTERVAL jiffies
-+static void usb_2_led_timer(void) {
-+ usb2_led_timer.expires = jiffies + ON_LED_INTERVAL;
-+ add_timer(&usb2_led_timer);
-+ return;
-+}
-+
-+// Initializes Timers
-+unsigned long initialized_timers = 0;
-+static void initializeTimers() {
-+ if (initialized_timers != 1) {
-+ init_timer(&usb1_led_timer);
-+ usb1_led_timer.function = turn_on_led_usb1;
-+ init_timer(&usb2_led_timer);
-+ usb2_led_timer.function = turn_on_led_usb2;
-+ initialized_timers = 1;
-+ }
-+}
-+// --- End Disk LED Activity Blinking Part 1 ---
-
- /***********************************************************************
- * Data transfer routines
-@@ -499,6 +553,21 @@
-
- /* are we scatter-gathering? */
- if (use_sg) {
-+ // --- Disk LED Activity Blinking Part 2 ---
-+ initializeTimers();
-+ if ((jiffies - turn_on_time) >= JIFFIES_BLINKING_TIME) {
-+ if (*us->pusb_dev->devpath == 0x31) {
-+ del_timer_sync(&usb1_led_timer);
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
-+ usb_1_led_timer();
-+ } else if (*us->pusb_dev->devpath == 0x32) {
-+ del_timer_sync(&usb2_led_timer);
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
-+ usb_2_led_timer();
-+ }
-+ turn_on_time = jiffies;
-+ }
-+ // --- End Disk LED Activity Blinking Part 2 ---
- /* use the usb core scatter-gather primitives */
- result = usb_stor_bulk_transfer_sglist(us, pipe,
- (struct scatterlist *) buf, use_sg,
+++ /dev/null
---- linux-2.6.12/drivers/char/random.c~ 2005-05-14 16:42:24.000000000 -0400
-+++ linux-2.6.12/drivers/char/random.c 2005-05-14 16:42:46.000000000 -0400
-@@ -646,6 +646,7 @@ extern void add_input_randomness(unsigne
- add_timer_randomness(&input_timer_state,
- (type << 4) ^ code ^ (code >> 4) ^ value);
- }
-+EXPORT_SYMBOL_GPL(add_input_randomness);
-
- void add_interrupt_randomness(int irq)
- {
---- linux-2.6.12/lib/kobject_uevent.c~ 2005-05-14 16:45:13.000000000 -0400
-+++ linux-2.6.12/lib/kobject_uevent.c 2005-05-14 16:45:27.000000000 -0400
-@@ -178,6 +178,7 @@ static inline int send_uevent(const char
-
- #ifdef CONFIG_HOTPLUG
- char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug";
-+EXPORT_SYMBOL_GPL(hotplug_path);
- u64 hotplug_seqnum;
- static DEFINE_SPINLOCK(sequence_lock);
+++ /dev/null
---- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700
-+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700
-@@ -37,6 +37,7 @@
- defined(CONFIG_ARCH_INTEGRATOR) || \
- defined(CONFIG_ARCH_PXA) || \
- defined(CONFIG_ARCH_IXP4XX) || \
-+ defined(CONFIG_ARCH_NSLU2) || \
- defined(CONFIG_ARCH_IXP2000) || \
- defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
---- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800
-+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700
-@@ -47,3 +47,8 @@
- orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
-
-+#ifdef CONFIG_ARCH_NSLU2
-+ mov r7, #(MACH_TYPE_NSLU2 & 0xff)
-+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00)
-+#endif
-+
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700
-@@ -43,6 +43,12 @@
- IXDP465 Development Platform (Also known as BMP).
- For more information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config ARCH_NSLU2
-+ bool "NSLU2"
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys's
-+ NSLU2 NAS device. For more information on this platform,
-+ see http://www.nslu2-linux.org
-
- #
- # IXCDP1100 is the exact same HW as IXDP425, but with a different machine
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:32.560983303 -0700
-@@ -8,4 +8,4 @@
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--
-+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o
---- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700
-+++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700
-@@ -604,7 +604,7 @@
- roverp7 MACH_ROVERP7 ROVERP7 594
- pr818s MACH_PR818S PR818S 595
- trxpro MACH_TRXPRO TRXPRO 596
--nslu2 MACH_NSLU2 NSLU2 597
-+nslu2 ARCH_NSLU2 NSLU2 597
- e400 MACH_E400 E400 598
- trab MACH_TRAB TRAB 599
- cmc_pu2 MACH_CMC_PU2 CMC_PU2 600
---- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800
-+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700
-@@ -94,7 +94,11 @@
- struct resource *res;
- };
-
-+#ifdef CONFIG_ARCH_NSLU2
-+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL };
-+#else
- static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-+#endif
-
- static int ixp4xx_flash_remove(struct device *_dev)
- {
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700
-@@ -44,5 +44,6 @@
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700
-@@ -93,4 +93,11 @@
- #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
- #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
-
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
-+
- #endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * based ixdp425-setup.c:
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-void __init nslu2_map_io(void)
-{
- ixp4xx_map_io();
-}
-
-static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource nslu2_flash_resource = {
- .start = NSLU2_FLASH_BASE,
- .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = {
- .platform_data = &nslu2_flash_data,
- },
- .num_resources = 1,
- .resource = &nslu2_flash_resource,
-};
-
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
- .sda_pin = NSLU2_SDA_PIN,
- .scl_pin = NSLU2_SCL_PIN,
-};
-
-static struct platform_device nslu2_i2c_controller = {
- .name = "IXP4XX-I2C",
- .id = 0,
- .dev = {
- .platform_data = &nslu2_i2c_gpio_pins,
- },
- .num_resources = 0
-};
-
-static struct resource nslu2_uart_resources[] = {
- {
- .start = IXP4XX_UART1_BASE_PHYS,
- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- {
- .start = IXP4XX_UART2_BASE_PHYS,
- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct plat_serial8250_port nslu2_uart_data[] = {
- {
- .mapbase = IXP4XX_UART1_BASE_PHYS,
- .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
- .mapbase = IXP4XX_UART2_BASE_PHYS,
- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- }
-};
-
-static struct platform_device nslu2_uart = {
- .name = "serial8250",
- .id = 0,
- .dev.platform_data = nslu2_uart_data,
- .num_resources = 2,
- .resource = nslu2_uart_resources
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
- &nslu2_flash,
- &nslu2_uart
-};
-
-static void n2_power_off(void)
-{
- /* This causes the box to drop the power and go dead. */
-#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000
- *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio
- *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed
-}
-
-static void __init nslu2_init(void)
-{
- ixp4xx_sys_init();
-
- pm_power_off = n2_power_off;
- platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
- BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
- IXP4XX_PERIPHERAL_BASE_VIRT)
- MAPIO(nslu2_map_io)
- INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here
- .timer = &ixp4xx_timer,
- // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed?
- BOOT_PARAMS(0x0100)
- INIT_MACHINE(nslu2_init)
-MACHINE_END
-
+++ /dev/null
---- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005
-+++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005
-@@ -139,7 +139,6 @@
- };
-
- static struct i2c_client x1205_i2c_client = {
-- .id = I2C_DRIVERID_X1205,
- .flags = 0,
- .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit
- .adapter = NULL, // the adapter we sit on assigned in attach
-@@ -301,7 +300,6 @@
- int errno;
-
- x1205_i2c_client.adapter = adapter;
-- x1205_i2c_client.id++;
-
- if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver
- return -EIO;
+++ /dev/null
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h.orig 2005-11-07 23:16:48.456117450 -0800
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h 2005-11-07 23:16:58.160728123 -0800
-@@ -8,6 +8,7 @@
- #define __ASM_ARCH_MEMORY_H
-
- #include <asm/sizes.h>
-+#include <asm/page.h>
-
- /*
- * Physical DRAM offset.
+++ /dev/null
---- linux-2.6.14/drivers/i2c/chips/Kconfig.orig 2005-11-07 22:30:30.413306237 -0800
-+++ linux-2.6.14/drivers/i2c/chips/Kconfig 2005-11-07 22:41:15.785916976 -0800
-@@ -126,13 +126,13 @@ config SENSORS_MAX6875
- This driver can also be built as a module. If so, the module
- will be called max6875.
-
--config RTC_X1205_I2C
-- tristate "Xicor X1205 RTC chip"
-- depends on I2C && EXPERIMENTAL
-- help
-- If you say yes here you get support for the Xicor X1205 RTC chip.
-+config SENSORS_X1205
-+ tristate "Xicor X1205 RTC chip"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for the Xicor X1205 RTC chip.
-
-- This driver can also be built as a module. If so, the module
-- will be called x1205.
-+ This driver can also be built as a module. If so, the module
-+ will be called x1205
-
- endmenu
---- linux-2.6.14/drivers/i2c/chips/Makefile.orig 2005-11-07 22:30:30.417306489 -0800
-+++ linux-2.6.14/drivers/i2c/chips/Makefile 2005-11-07 22:41:59.616675071 -0800
-@@ -13,7 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591
- obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
- obj-$(CONFIG_TPS65010) += tps65010.o
--obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
-+obj-$(CONFIG_SENSORS_X1205) += x1205.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
---- linux-2.6.14/drivers/i2c/chips/x1205.c.orig 2005-11-07 22:30:30.421306741 -0800
-+++ linux-2.6.14/drivers/i2c/chips/x1205.c 2005-11-07 22:42:54.960157617 -0800
-@@ -1,14 +1,16 @@
- /*
-- * x1205.c - An i2c driver for the Xicor X1205 RTC
-+ * linux/drivers/i2c/chips/x1205.c
-+ *
-+ * x1205.c - An 12c driver for the Xicor X1205 RTC
- * Copyright 2004 Karen Spearel
- * Copyright 2005 Alessandro Zummo
- *
- * please send all reports to:
- * kas11 at tampabay dot rr dot com
- * a dot zummo at towertech dot it
-- *
-+ *
- * based on the other drivers in this same directory.
-- *
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -26,83 +28,36 @@
-
- #include <linux/x1205.h>
-
--#define DRV_VERSION "0.9.9"
-+#define EPOCH_1900 1900
-+#define EPOCH_1970 1970
-+
-+#define DRIVER_VERSION "0.9.6"
-+#define DRIVER_NAME (x1205_driver.name)
-
--/* Addresses to scan: none. This chip is located at
-- * 0x6f and uses a two bytes register addressing.
-- * Two bytes need to be written to read a single register,
-- * while most other chips just require one and take the second
-- * one as the data to be written. To prevent corrupting
-- * unknown chips, the user must explicitely set the probe parameter.
-- */
-
--static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
-
- /* Insmod parameters */
- I2C_CLIENT_INSMOD;
- I2C_CLIENT_MODULE_PARM(hctosys,
- "Set the system time from the hardware clock upon initialization");
-
--/* offsets into CCR area */
--
--#define CCR_SEC 0
--#define CCR_MIN 1
--#define CCR_HOUR 2
--#define CCR_MDAY 3
--#define CCR_MONTH 4
--#define CCR_YEAR 5
--#define CCR_WDAY 6
--#define CCR_Y2K 7
--
--#define X1205_REG_SR 0x3F /* status register */
--#define X1205_REG_Y2K 0x37
--#define X1205_REG_DW 0x36
--#define X1205_REG_YR 0x35
--#define X1205_REG_MO 0x34
--#define X1205_REG_DT 0x33
--#define X1205_REG_HR 0x32
--#define X1205_REG_MN 0x31
--#define X1205_REG_SC 0x30
--#define X1205_REG_DTR 0x13
--#define X1205_REG_ATR 0x12
--#define X1205_REG_INT 0x11
--#define X1205_REG_0 0x10
--#define X1205_REG_Y2K1 0x0F
--#define X1205_REG_DWA1 0x0E
--#define X1205_REG_YRA1 0x0D
--#define X1205_REG_MOA1 0x0C
--#define X1205_REG_DTA1 0x0B
--#define X1205_REG_HRA1 0x0A
--#define X1205_REG_MNA1 0x09
--#define X1205_REG_SCA1 0x08
--#define X1205_REG_Y2K0 0x07
--#define X1205_REG_DWA0 0x06
--#define X1205_REG_YRA0 0x05
--#define X1205_REG_MOA0 0x04
--#define X1205_REG_DTA0 0x03
--#define X1205_REG_HRA0 0x02
--#define X1205_REG_MNA0 0x01
--#define X1205_REG_SCA0 0x00
--
--#define X1205_CCR_BASE 0x30 /* Base address of CCR */
--#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
--
--#define X1205_SR_RTCF 0x01 /* Clock failure */
--#define X1205_SR_WEL 0x02 /* Write Enable Latch */
--#define X1205_SR_RWEL 0x04 /* Register Write Enable */
--
--#define X1205_DTR_DTR0 0x01
--#define X1205_DTR_DTR1 0x02
--#define X1205_DTR_DTR2 0x04
--
--#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
--
- /* Prototypes */
-+
- static int x1205_attach(struct i2c_adapter *adapter);
- static int x1205_detach(struct i2c_client *client);
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
--static int x1205_command(struct i2c_client *client, unsigned int cmd,
-- void *arg);
-+static int x1205_validate_client(struct i2c_client *client);
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ u8 reg_base);
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base);
-+static int x1205_validate_tm(struct rtc_time *tm);
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
-+static int x1205_hctosys(struct i2c_client *client);
-+
-
- static struct i2c_driver x1205_driver = {
- .owner = THIS_MODULE,
-@@ -110,6 +65,7 @@ static struct i2c_driver x1205_driver =
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = &x1205_attach,
- .detach_client = &x1205_detach,
-+/* .command = &x1205_command,*/
- };
-
- struct x1205_data {
-@@ -118,8 +74,9 @@ struct x1205_data {
- unsigned int epoch;
- };
-
--static const unsigned char days_in_mo[] =
-- { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-+
-+static const unsigned char days_in_mo[] =
-+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
- static LIST_HEAD(x1205_clients);
-
-@@ -127,6 +84,7 @@ static LIST_HEAD(x1205_clients);
- * commands to a specific client. This function will send the command
- * to the first client.
- */
-+
- int x1205_do_command(unsigned int cmd, void *arg)
- {
- struct list_head *walk;
-@@ -141,114 +99,98 @@ int x1205_do_command(unsigned int cmd, v
- return -ENODEV;
- }
-
--#define is_leap(year) \
-- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
--
--/* make sure the rtc_time values are in bounds */
--static int x1205_validate_tm(struct rtc_time *tm)
--{
-- int year = tm->tm_year + 1900;
--
-- if ((tm->tm_year < 70) || (tm->tm_year > 255))
-- return -EINVAL;
--
-- if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-- return -EINVAL;
--
-- if (tm->tm_mday > days_in_mo[tm->tm_mon]
-- + ((tm->tm_mon == 1) && is_leap(year)))
-- return -EINVAL;
--
-- if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-- return -EINVAL;
--
-- return 0;
--}
-
- /*
-- * In the routines that deal directly with the x1205 hardware, we use
-+ * in the routines that deal directly with the x1205 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-- * Epoch is initialized as 2000. Time is set to UTC.
-+ * Epoch is inited as 2000. Time is set to UT
- */
-+
- static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
- u8 reg_base)
- {
-- unsigned char dt_addr[2] = { 0, reg_base };
-- static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+ static unsigned char dt_addr[] = { 0, };
-+ static unsigned char sr_addr[] = { 0, };
-
-- unsigned char buf[8], sr;
-+ unsigned char buf[8], sr;
-
- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &sr }, /* read status */
-- { client->addr, 0, 2, dt_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 8, buf }, /* read date */
-+ { client->addr, 0, 2, sr_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &sr },
-+ { client->addr, 0, 2, dt_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 8, buf },
- };
-
-- struct x1205_data *data = i2c_get_clientdata(client);
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-
-- /* read status register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
-+ dt_addr[1] = reg_base;
-+ sr_addr[1] = X1205_REG_SR;
-
-- /* check for battery failure */
-- if (sr & X1205_SR_RTCF) {
-- dev_warn(&client->dev,
-- "Clock had a power failure, you must set the date.\n");
-- return -EINVAL;
-- }
-+ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
-+ ARRAY_SIZE(msgs)) {
-+ /* did we read the correct number of messages? */
-+
-+ /* check for battery failure */
-+ if (sr & X1205_SR_RTCF)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Clock had a power failure, you must set the date.\n",
-+ DRIVER_NAME);
-
-- /* read date registers */
-- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- dev_dbg(&client->dev,
-- "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-- __FUNCTION__,
-- buf[0], buf[1], buf[2], buf[3],
-- buf[4], buf[5], buf[6], buf[7]);
--
-- tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-- tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-- tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-- tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-- tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
-- data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
-- tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
-- tm->tm_wday = buf[CCR_WDAY];
-+ return -EINVAL;
-+ }
-
-- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-- "mday=%d, mon=%d, year=%d, wday=%d\n",
-- __FUNCTION__,
-- tm->tm_sec, tm->tm_min, tm->tm_hour,
-- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec-%02x min-%02x hr-%02x"
-+ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ buf[CCR_HOUR] &= ~X1205_HR_MIL;
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
-+ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
-+ } else {
-+ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
- return 0;
- }
-
-+
- static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
- {
- int i, err, xfer;
-
-- unsigned char buf[8];
-+ static unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-
-- static const unsigned char wel[3] = { 0, X1205_REG_SR,
-- X1205_SR_WEL };
-
-- static const unsigned char rwel[3] = { 0, X1205_REG_SR,
-- X1205_SR_WEL | X1205_SR_RWEL };
-+ static unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-
-- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-
-- struct x1205_data *data = i2c_get_clientdata(client);
-+ static unsigned char data[3] = { 0, };
-+ static unsigned char buf[8];
-+
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-
-- /* check if all values in the tm struct are correct */
- if ((err = x1205_validate_tm(tm)) < 0)
- return err;
-
-@@ -258,124 +200,52 @@ static int x1205_set_datetime(struct i2c
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
-- buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-- buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-
-- /* set hour and 24hr bit */
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* Set 24HR format */
- buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-
-- /* should we also set the date? */
-- if (datetoo) {
-- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+ if (datetoo == X1205_DATETOO) {
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-
- /* month, 0 - 11 */
-- buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */
-
- /* year, since 1900 */
-- buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
-- buf[CCR_WDAY] = tm->tm_wday & 0x07;
-- buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
-+ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
-+ buf[CCR_WDAY] = tm->tm_wday & 7;
-+ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100);
- }
-
-- /* this sequence is required to unlock the chip */
- xfer = i2c_master_send(client, wel, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
- return -EIO;
-- }
-
- xfer = i2c_master_send(client, rwel, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
- return -EIO;
-- }
-
-- /* write register's data */
-- for (i = 0; i < (datetoo ? 8 : 3); i++) {
-- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
--
-- xfer = i2c_master_send(client, rdata, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev,
-- "%s: xfer=%d addr=%02x, data=%02x\n",
-- __FUNCTION__,
-- xfer, rdata[1], rdata[2]);
-+ for (i = 0; i < 8; i++) {
-+ data[1] = i + reg_base;
-+ data[2] = buf[i];
-+ xfer = i2c_master_send(client, data, 3);
-+
-+ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n",
-+ __FUNCTION__,
-+ xfer, data[1], data[2]);
-+
-+ if (xfer != 3)
- return -EIO;
-- }
- };
-
-- /* disable further writes */
- xfer = i2c_master_send(client, diswe, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
-- return -EIO;
-- }
--
-- return 0;
--}
--
--static int x1205_get_dtrim(struct i2c_client *client, int *trim)
--{
-- unsigned char dtr;
-- static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
--
-- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
-- };
--
-- /* read dtr register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
--
-- *trim = 0;
--
-- if (dtr & X1205_DTR_DTR0)
-- *trim += 20;
--
-- if (dtr & X1205_DTR_DTR1)
-- *trim += 10;
--
-- if (dtr & X1205_DTR_DTR2)
-- *trim = -*trim;
--
-- return 0;
--}
--
--static int x1205_get_atrim(struct i2c_client *client, int *trim)
--{
-- s8 atr;
-- static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
--
-- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, atr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
-- };
--
-- /* read atr register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
--
-- /* atr is a two's complement value on 6 bits,
-- * perform sign extension. The formula is
-- * Catr = (atr * 0.25pF) + 11.00pF.
-- */
-- if (atr & 0x20)
-- atr |= 0xC0;
--
-- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
--
-- *trim = (atr * 250) + 11000;
--
-- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-
- return 0;
- }
-@@ -386,24 +256,28 @@ static int x1205_hctosys(struct i2c_clie
-
- struct rtc_time tm;
- struct timespec tv;
-+
-
- err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
-
-- if (err) {
-- dev_err(&client->dev,
-- "Unable to set the system clock\n");
-+ if (err)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Unable to set the system clock\n",
-+ DRIVER_NAME);
-+
- return err;
-+
- }
-
-- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-- * whether it stores the most close value or the value with partial
-- * seconds truncated. However, it is important that we use it to store
-- * the truncated value. This is because otherwise it is necessary,
-- * in an rtc sync function, to read both xtime.tv_sec and
-- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-- * of >32bits is not possible. So storing the most close value would
-- * slow down the sync API. So here we have the truncated value and
-- * the best guess is to add 0.5s.
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether
-+ * it stores the most close value or the value with partial seconds
-+ * truncated, however it is important for x1205_sync_rtc that it be
-+ * defined to store the truncated value. This is because otherwise it
-+ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
-+ * sync function, and atomic reads of >32bits on ARM are not possible.
-+ * So storing the most close value would slow down the sync API. So
-+ * Here we have the truncated value and the best guess is to add 0.5s
- */
-
- tv.tv_nsec = NSEC_PER_SEC >> 1;
-@@ -413,15 +287,16 @@ static int x1205_hctosys(struct i2c_clie
- * the month to be in the range 1-12
- */
-
-- tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
-+ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
- tm.tm_mday, tm.tm_hour,
- tm.tm_min, tm.tm_sec);
-
- do_settimeofday(&tv);
-
-- dev_info(&client->dev,
-- "setting the system clock to %d-%d-%d %d:%d:%d\n",
-- tm.tm_year + 1900, tm.tm_mon + 1,
-+ dev_info(&client->adapter->dev,
-+ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ DRIVER_NAME,
-+ tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
- tm.tm_mday, tm.tm_hour, tm.tm_min,
- tm.tm_sec);
-
-@@ -432,7 +307,7 @@ struct x1205_limit
- {
- unsigned char reg;
- unsigned char mask;
-- unsigned char min;
-+ unsigned char min;
- unsigned char max;
- };
-
-@@ -443,16 +318,34 @@ static int x1205_validate_client(struct
- /* Probe array. We will read the register at the specified
- * address and check if the given bits are zero.
- */
-- static const unsigned char probe_zero_pattern[] = {
-- /* register, mask */
-+
-+ const unsigned char probe_zero_pattern[] = {
-+
- X1205_REG_SR, 0x18,
-+ X1205_REG_Y2K, 0xC6,
-+ X1205_REG_DW, 0xF8,
-+ X1205_REG_MO, 0xE0,
-+ X1205_REG_DT, 0xC0,
-+ X1205_REG_HR, 0x40,
-+ X1205_REG_MN, 0x80,
-+ X1205_REG_SC, 0x80,
- X1205_REG_DTR, 0xF8,
- X1205_REG_ATR, 0xC0,
- X1205_REG_INT, 0x18,
- X1205_REG_0, 0xFF,
-+ X1205_REG_Y2K1, 0xC6,
-+ X1205_REG_DWA1, 0x78,
-+ X1205_REG_MOA1, 0x60,
-+ X1205_REG_DTA1, 0x40,
-+ X1205_REG_HRA1, 0x40,
-+ X1205_REG_Y2K0, 0xC6,
-+ X1205_REG_DWA0, 0x78,
-+ X1205_REG_MOA0, 0x60,
-+ X1205_REG_DTA0, 0x40,
-+ X1205_REG_HRA0, 0x40,
- };
-
-- static const struct x1205_limit probe_limits_pattern[] = {
-+ const struct x1205_limit probe_limits_pattern[] = {
- /* register, mask, min, max */
- { X1205_REG_Y2K, 0xFF, 19, 20 },
- { X1205_REG_DW, 0xFF, 0, 6 },
-@@ -463,23 +356,41 @@ static int x1205_validate_client(struct
- { X1205_REG_MN, 0xFF, 0, 59 },
- { X1205_REG_SC, 0xFF, 0, 59 },
- { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_DWA1, 0x7F, 0, 6 },
-+ { X1205_REG_MOA1, 0x7F, 0, 12 },
-+ { X1205_REG_DTA1, 0x7F, 0, 31 },
-+ { X1205_REG_HRA1, 0x7F, 0, 23 },
-+ { X1205_REG_MNA1, 0x7F, 0, 59 },
-+ { X1205_REG_SCA1, 0x7F, 0, 59 },
- { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ { X1205_REG_DWA0, 0x7F, 0, 6 },
-+ { X1205_REG_MOA0, 0x7F, 0, 12 },
-+ { X1205_REG_DTA0, 0x7F, 0, 31 },
-+ { X1205_REG_HRA0, 0x7F, 0, 23 },
-+ { X1205_REG_MNA0, 0x7F, 0, 59 },
-+ { X1205_REG_SCA0, 0x7F, 0, 59 },
- };
-
- /* check that registers have bits a 0 where expected */
-- for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
-+ {
- unsigned char buf;
-
-- unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+ static unsigned char addr[2];
-
- struct i2c_msg msgs[2] = {
-- { client->addr, 0, 2, addr },
-+ { client->addr, 0, 2, addr }, /* random read */
- { client->addr, I2C_M_RD, 1, &buf },
- };
-
-+ addr[0] = 0x00;
-+ addr[1] = probe_zero_pattern[i];
-+
- xfer = i2c_transfer(client->adapter, msgs, 2);
-+
- if (xfer != 2) {
-- dev_err(&client->adapter->dev,
-+ dev_dbg(&client->adapter->dev,
- "%s: could not read register %x\n",
- __FUNCTION__, addr[1]);
-
-@@ -487,42 +398,47 @@ static int x1205_validate_client(struct
- }
-
- if ((buf & probe_zero_pattern[i+1]) != 0) {
-- dev_err(&client->adapter->dev,
-- "%s: register=%02x, zero pattern=%d, value=%x\n",
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register %x, zero pattern %d: %x\n",
- __FUNCTION__, addr[1], i, buf);
-
- return -ENODEV;
- }
- }
-
-- /* check limits (only registers with bcd values) */
-- for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-- unsigned char reg, value;
-+ /* check limits */
-
-- unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
-+ {
-+ unsigned char buf, val;
-+
-+ static unsigned char addr[2];
-
- struct i2c_msg msgs[2] = {
-- { client->addr, 0, 2, addr },
-- { client->addr, I2C_M_RD, 1, ® },
-+ { client->addr, 0, 2, addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &buf },
- };
-
-+ addr[0] = 0x00;
-+ addr[1] = probe_limits_pattern[i].reg;
-+
- xfer = i2c_transfer(client->adapter, msgs, 2);
-
- if (xfer != 2) {
-- dev_err(&client->adapter->dev,
-+ dev_dbg(&client->adapter->dev,
- "%s: could not read register %x\n",
- __FUNCTION__, addr[1]);
-
- return -EIO;
- }
-
-- value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+ val = BCD2BIN(buf & probe_limits_pattern[i].mask);
-
-- if (value > probe_limits_pattern[i].max ||
-- value < probe_limits_pattern[i].min) {
-+ if (val > probe_limits_pattern[i].max ||
-+ val < probe_limits_pattern[i].min) {
- dev_dbg(&client->adapter->dev,
-- "%s: register=%x, lim pattern=%d, value=%d\n",
-- __FUNCTION__, addr[1], i, value);
-+ "%s: register %x, lim pattern %d: %d\n",
-+ __FUNCTION__, addr[1], i, val);
-
- return -ENODEV;
- }
-@@ -538,79 +454,66 @@ static int x1205_attach(struct i2c_adapt
- return i2c_probe(adapter, &addr_data, x1205_probe);
- }
-
--int x1205_direct_attach(int adapter_id,
-- struct i2c_client_address_data *address_data)
--{
-- int err;
-- struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
--
-- if (adapter) {
-- err = i2c_probe(adapter,
-- address_data, x1205_probe);
--
-- i2c_put_adapter(adapter);
--
-- return err;
-- }
--
-- return -ENODEV;
--}
--
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
- {
-- struct i2c_client *client;
-- struct x1205_data *data;
-+ struct i2c_client *new_client;
-+ struct x1205_data *xdata;
-
- int err = 0;
-
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
-- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-- err = -ENODEV;
-- goto exit;
-- }
--
-- if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
-+ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
-- /* Initialize our structures */
-- data->epoch = 2000;
-+ /* Fill our data structure */
-
-- client = &data->client;
-- client->addr = address;
-- client->driver = &x1205_driver;
-- client->adapter = adapter;
-+ memset(xdata, 0, sizeof(struct x1205_data));
-
-- strlcpy(client->name, "x1205", I2C_NAME_SIZE);
-+ xdata->epoch = 2000;
-+
-+
-+ /* Prepare i2c_client structure */
-+
-+ new_client = &xdata->client;
-+ i2c_set_clientdata(new_client, xdata);
-+ new_client->addr = address;
-+ new_client->adapter = adapter;
-+ new_client->driver = &x1205_driver;
-+ new_client->flags = 0;
-+
-+ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
-
-- i2c_set_clientdata(client, data);
-
- /* Verify the chip is really an X1205 */
-- if (kind < 0) {
-- if (x1205_validate_client(client) < 0) {
-+
-+ if (kind < 0)
-+ {
-+ if (x1205_validate_client(new_client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
-
- /* Inform the i2c layer */
-- if ((err = i2c_attach_client(client)))
-+ if ((err = i2c_attach_client(new_client)))
- goto exit_kfree;
-
-- list_add(&data->list, &x1205_clients);
-+ list_add(&xdata->list, &x1205_clients);
-
-- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
-+ DRIVER_NAME);
-
-- /* If requested, set the system time */
-+ /* If requested, se the system time */
- if (hctosys)
-- x1205_hctosys(client);
-+ x1205_hctosys(new_client);
-
- return 0;
-
- exit_kfree:
-- kfree(data);
-+ kfree(xdata);
-
- exit:
- return err;
-@@ -620,23 +523,44 @@ static int x1205_detach(struct i2c_clien
- {
- int err;
- struct x1205_data *data = i2c_get_clientdata(client);
--
-+
- dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- list_del(&data->list);
--
- kfree(data);
-+ return 0;
-+}
-+
-+/* make sure the rtc_time values are in bounds */
-+static int x1205_validate_tm(struct rtc_time *tm)
-+{
-+ tm->tm_year += 1900;
-+
-+ if (tm->tm_year < EPOCH_1970)
-+ return -EINVAL;
-+
-+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+ return -EINVAL;
-+
-+ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) &&
-+ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
-+ return -EINVAL;
-+
-+ if ((tm->tm_year -= EPOCH_1900) > 255)
-+ return -EINVAL;
-+
-+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+ return -EINVAL;
-
- return 0;
- }
-
--static int x1205_command(struct i2c_client *client, unsigned int cmd,
-- void *param)
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
- {
-- if (param == NULL)
-+ if (client == NULL || tm == NULL)
- return -EINVAL;
-
- if (!capable(CAP_SYS_TIME))
-@@ -646,34 +570,26 @@ static int x1205_command(struct i2c_clie
-
- switch (cmd) {
- case X1205_CMD_GETDATETIME:
-- return x1205_get_datetime(client, param, X1205_CCR_BASE);
-+ return x1205_get_datetime(client, tm, X1205_CCR_BASE);
-
- case X1205_CMD_SETTIME:
-- return x1205_set_datetime(client, param, 0,
-- X1205_CCR_BASE);
-+ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
-
- case X1205_CMD_SETDATETIME:
-- return x1205_set_datetime(client, param, 1,
-- X1205_CCR_BASE);
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
-
- case X1205_CMD_GETALARM:
-- return x1205_get_datetime(client, param, X1205_ALM0_BASE);
-+ return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
-
- case X1205_CMD_SETALARM:
-- return x1205_set_datetime(client, param, 1,
-- X1205_ALM0_BASE);
--
-- case X1205_CMD_GETDTRIM:
-- return x1205_get_dtrim(client, param);
--
-- case X1205_CMD_GETATRIM:
-- return x1205_get_atrim(client, param);
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
-
- default:
- return -EINVAL;
- }
- }
-
-+
- static int __init x1205_init(void)
- {
- return i2c_add_driver(&x1205_driver);
-@@ -689,10 +605,8 @@ MODULE_AUTHOR(
- "Alessandro Zummo <a.zummo@towertech.it>");
- MODULE_DESCRIPTION("Xicor X1205 RTC driver");
- MODULE_LICENSE("GPL");
--MODULE_VERSION(DRV_VERSION);
-
- EXPORT_SYMBOL_GPL(x1205_do_command);
--EXPORT_SYMBOL_GPL(x1205_direct_attach);
-
- module_init(x1205_init);
- module_exit(x1205_exit);
---- linux-2.6.14/include/linux/x1205.h.orig 2005-11-07 22:38:42.196252187 -0800
-+++ linux-2.6.14/include/linux/x1205.h 2005-11-07 22:42:54.960157617 -0800
-@@ -1,31 +1,67 @@
--/*
-- * x1205.h - defines for drivers/i2c/chips/x1205.c
-- * Copyright 2004 Karen Spearel
-- * Copyright 2005 Alessandro Zummo
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef __LINUX_X1205_H__
--#define __LINUX_X1205_H__
-
- /* commands */
-
--#define X1205_CMD_GETDATETIME 0
--#define X1205_CMD_SETTIME 1
--#define X1205_CMD_SETDATETIME 2
-+#define X1205_CMD_GETDATETIME 0
-+#define X1205_CMD_SETTIME 1
-+#define X1205_CMD_SETDATETIME 2
- #define X1205_CMD_GETALARM 3
- #define X1205_CMD_SETALARM 4
--#define X1205_CMD_GETDTRIM 5
--#define X1205_CMD_SETDTRIM 6
--#define X1205_CMD_GETATRIM 7
--#define X1205_CMD_SETATRIM 8
-+
-+/* flags */
-+
-+#define X1205_NODATE 0
-+#define X1205_DATETOO 1
-+
-+/* offsets into read buf - add 2 for write buf */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */
-+
-+#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */
-
- extern int x1205_do_command(unsigned int cmd, void *arg);
--extern int x1205_direct_attach(int adapter_id,
-- struct i2c_client_address_data *address_data);
-
--#endif /* __LINUX_X1205_H__ */
+++ /dev/null
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c.orig 2005-11-07 22:26:36.010556202 -0800
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c 2005-11-07 22:27:15.921067613 -0800
-@@ -504,7 +504,7 @@ static int __init n2iom_init(void)
- return -EBUSY;
- }
- else {
-- class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
- }
- #endif
-
-@@ -513,7 +513,7 @@ static int __init n2iom_init(void)
- return -EBUSY;
- }
- else {
-- class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
- }
-
- return 0;
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 22:59:39 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SWAP_PREFETCH=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI Transport Layers
-#
-# CONFIG_SAS_CLASS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-# CONFIG_KGDBOE is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_GOTEMP is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISER4_FS is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700
-+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700
-@@ -38,10 +38,14 @@
- #define BYTE1(h) ((h) & 0xFF)
- #endif
-
-+#define FLASHWORD(a) (*(__u16*)(a))
-+#define FLASHVAL(a) FLASHWORD(a)
-+#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0)
-+
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
- map_word val;
-- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
-+ val.x[0] = FLASHVAL(map->map_priv_1 + ofs);
- return val;
- }
-
-@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map
- static void ixp4xx_copy_from(struct map_info *map, void *to,
- unsigned long from, ssize_t len)
- {
-- int i;
-- u8 *dest = (u8 *) to;
-- u16 *src = (u16 *) (map->map_priv_1 + from);
-- u16 data;
--
-- for (i = 0; i < (len / 2); i++) {
-- data = src[i];
-- dest[i * 2] = BYTE0(data);
-- dest[i * 2 + 1] = BYTE1(data);
-+ u8 *dest, *src;
-+
-+ if (len <= 0)
-+ return;
-+
-+ dest = (u8 *) to;
-+ src = (u8 *) (map->map_priv_1 + from);
-+ if (from & 1)
-+ *dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len;
-+
-+ while (len >= 2) {
-+ u16 data = FLASHVAL(src); src += 2;
-+ *dest++ = BYTE0(data);
-+ *dest++ = BYTE1(data);
-+ len -= 2;
- }
-
-- if (len & 1)
-- dest[len - 1] = BYTE0(src[i]);
-+ if (len > 0)
-+ *dest++ = BYTE0(FLASHVAL(src));
- }
-
- /*
-@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_
- static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
- {
- if (!(adr & 1))
-- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
-+ FLASHSET(map->map_priv_1 + adr, d.x[0]);
- }
-
- /*
-@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct
- */
- static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
- {
-- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
-+ FLASHSET(map->map_priv_1 + adr, d.x[0]);
- }
-
- struct ixp4xx_flash_info {
+++ /dev/null
---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700
-+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700
-@@ -22,6 +22,7 @@
- #include <linux/string.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/map.h>
-+#include <linux/mtd/cfi_endian.h>
- #include <linux/mtd/partitions.h>
- #include <linux/ioport.h>
- #include <linux/device.h>
-@@ -30,17 +31,40 @@
-
- #include <linux/reboot.h>
-
-+/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH
-+ * will flip the second address bit - i.e. XOR the address with 10b.
-+ * This causes the cfi commands (sent to the command address, 0xAA for
-+ * 16 bit flash) to fail. This is fixed here by XOR'ing the address
-+ * before use with 10b. The cost of this is that the flash layout ends
-+ * up with pdp-endiannes (on an LE system), however this is not a problem
-+ * as the access code consistently only accesses half words - so the
-+ * endianness is not determinable on stuff which is written and read
-+ * consistently in the little endian world.
-+ *
-+ * For flash data from the big-endian world, however, the results are
-+ * weird - the pdp-endianness results in the data apparently being
-+ * 2-byte swapped (as in dd conv=swab). To work round this the 16
-+ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu,
-+ * by default these are no-ops, but if the MTD driver is configed with
-+ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data,
-+ * resulting in a consistently BE view of the flash on both BE (no
-+ * op) and LE systems. This config setting also causes the command
-+ * data from the CFI implementation to get swapped - as is required
-+ * so that this code will *unswap* it and give the correct command
-+ * data to the flash.
-+ */
- #ifndef __ARMEB__
- #define BYTE0(h) ((h) & 0xFF)
- #define BYTE1(h) (((h) >> 8) & 0xFF)
-+#define FLASHWORD(a) (*(__u16*)((u32)(a) ^ 2))
- #else
- #define BYTE0(h) (((h) >> 8) & 0xFF)
- #define BYTE1(h) ((h) & 0xFF)
-+#define FLASHWORD(a) (*(__u16*)(a))
- #endif
-
--#define FLASHWORD(a) (*(__u16*)(a))
--#define FLASHVAL(a) FLASHWORD(a)
--#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0)
-+#define FLASHVAL(a) cfi16_to_cpu(FLASHWORD(a))
-+#define FLASHSET(a,v) (FLASHWORD(a) = cpu_to_cfi16(v))
-
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
+++ /dev/null
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c). If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken. The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- i = numslots;
- break;
- }
-- if (!memcmp(buf[i].name, "FIS directory", 14))
-+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+ /* This is apparently the FIS directory entry for the
-+ * FIS directory itself. The FIS directory size is
-+ * one erase block; if the buf[i].size field is
-+ * swab32(erasesize) then we know we are looking at
-+ * a byte swapped FIS directory - swap all the entries!
-+ * (NOTE: this is 'size' not 'data_length'; size is
-+ * the full size of the entry.)
-+ */
-+ if (swab32(buf[i].size) == master->erasesize) {
-+ int j;
-+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+ /* The unsigned long fields were written with the
-+ * wrong byte sex, name and pad have no byte sex.
-+ */
-+ swab32s(&buf[j].flash_base);
-+ swab32s(&buf[j].mem_base);
-+ swab32s(&buf[j].size);
-+ swab32s(&buf[j].entry_point);
-+ swab32s(&buf[j].data_length);
-+ swab32s(&buf[j].desc_cksum);
-+ swab32s(&buf[j].file_cksum);
-+ }
-+ }
- break;
-+ }
- }
- if (i == numslots) {
- /* Didn't find it */
-
-
+++ /dev/null
-# The inline caller of these APIs were changed to have
-# const vaddr parameters...
---- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig 2005-09-24 17:06:19.968099976 -0700
-+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h 2005-09-24 17:06:52.542149731 -0700
-@@ -113,7 +113,7 @@
- }
-
- static inline void
--__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
-+__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
- {
- while (count--)
- writeb(*vaddr++, bus_addr);
-@@ -136,7 +136,7 @@
- }
-
- static inline void
--__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
-+__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
- {
- while (count--)
- writew(*vaddr++, bus_addr);
-@@ -154,7 +154,7 @@
- }
-
- static inline void
--__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
-+__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
- {
- while (count--)
- writel(*vaddr++, bus_addr);
+++ /dev/null
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:33:21.757679882 -0700
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:47:02.581331058 -0700
-@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr)
- #define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x)
- #define __arch_iounmap(a) __ixp4xx_iounmap(a)
-
--#define writeb(p, v) __ixp4xx_writeb(p, v)
--#define writew(p, v) __ixp4xx_writew(p, v)
--#define writel(p, v) __ixp4xx_writel(p, v)
-+#define writeb(v, p) __ixp4xx_writeb(v, p)
-+#define writew(v, p) __ixp4xx_writew(v, p)
-+#define writel(v, p) __ixp4xx_writel(v, p)
-
- #define writesb(p, v, l) __ixp4xx_writesb(p, v, l)
- #define writesw(p, v, l) __ixp4xx_writesw(p, v, l)
-@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr)
- #define readsl(p, v, l) __ixp4xx_readsl(p, v, l)
-
- static inline void
--__ixp4xx_writeb(u8 value, u32 addr)
-+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START) {
-@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr)
- }
-
- static inline void
--__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
-+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
- {
- while (count--)
- writeb(*vaddr++, bus_addr);
- }
-
- static inline void
--__ixp4xx_writew(u16 value, u32 addr)
-+__ixp4xx_writew(u16 value, volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START) {
-@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr)
- }
-
- static inline void
--__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
-+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
- {
- while (count--)
- writew(*vaddr++, bus_addr);
- }
-
- static inline void
--__ixp4xx_writel(u32 value, u32 addr)
-+__ixp4xx_writel(u32 value, volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- if (addr >= VMALLOC_START) {
- __raw_writel(value, addr);
- return;
-@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr)
- }
-
- static inline void
--__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
-+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
- {
- while (count--)
- writel(*vaddr++, bus_addr);
- }
-
- static inline unsigned char
--__ixp4xx_readb(u32 addr)
-+__ixp4xx_readb(const volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START)
-@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr)
- }
-
- static inline void
--__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count)
-+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
- {
- while (count--)
- *vaddr++ = readb(bus_addr);
- }
-
- static inline unsigned short
--__ixp4xx_readw(u32 addr)
-+__ixp4xx_readw(const volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START)
-@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr)
- }
-
- static inline void
--__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count)
-+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
- {
- while (count--)
- *vaddr++ = readw(bus_addr);
- }
-
- static inline unsigned long
--__ixp4xx_readl(u32 addr)
-+__ixp4xx_readl(const volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 data;
-
- if (addr >= VMALLOC_START)
-@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr)
- }
-
- static inline void
--__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count)
-+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
- {
- while (count--)
- *vaddr++ = readl(bus_addr);
-@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr
- eth_copy_and_sum((s),__mem_pci(c),(l),(b))
-
- static inline int
--check_signature(unsigned long bus_addr, const unsigned char *signature,
-+check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature,
- int length)
- {
- int retval = 0;
-@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u
- #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
- ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
- static inline unsigned int
--__ixp4xx_ioread8(void __iomem *addr)
-+__ixp4xx_ioread8(const void __iomem *addr)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return (unsigned int)__raw_readb(port);
- #else
-- return (unsigned int)__ixp4xx_readb(port);
-+ return (unsigned int)__ixp4xx_readb(addr);
- #endif
- }
-
- static inline void
--__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr,
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsb(addr, vaddr, count);
- #else
-- __ixp4xx_readsb(port, vaddr, count);
-+ __ixp4xx_readsb(addr, vaddr, count);
- #endif
- }
-
- static inline unsigned int
--__ixp4xx_ioread16(void __iomem *addr)
-+__ixp4xx_ioread16(const void __iomem *addr)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le16_to_cpu(__raw_readw((u32)port));
- #else
-- return (unsigned int)__ixp4xx_readw((u32)port);
-+ return (unsigned int)__ixp4xx_readw(addr);
- #endif
- }
-
- static inline void
--__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsw(addr, vaddr, count);
- #else
-- __ixp4xx_readsw(port, vaddr, count);
-+ __ixp4xx_readsw(addr, vaddr, count);
- #endif
- }
-
- static inline unsigned int
--__ixp4xx_ioread32(void __iomem *addr)
-+__ixp4xx_ioread32(const void __iomem *addr)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu(__raw_readl((u32)port));
- #else
-- return (unsigned int)__ixp4xx_readl((u32)port);
-+ return (unsigned int)__ixp4xx_readl(addr);
- #endif
- }
- }
-
- static inline void
--__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsl(addr, vaddr, count);
- #else
-- __ixp4xx_readsl(port, vaddr, count);
-+ __ixp4xx_readsl(addr, vaddr, count);
- #endif
- }
-
-@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writeb(value, port);
- #else
-- __ixp4xx_writeb(value, port);
-+ __ixp4xx_writeb(value, addr);
- #endif
- }
-
-@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesb(addr, vaddr, count);
- #else
-- __ixp4xx_writesb(port, vaddr, count);
-+ __ixp4xx_writesb(addr, vaddr, count);
- #endif
- }
-
-@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writew(cpu_to_le16(value), addr);
- #else
-- __ixp4xx_writew(value, port);
-+ __ixp4xx_writew(value, addr);
- #endif
- }
-
-@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesw(addr, vaddr, count);
- #else
-- __ixp4xx_writesw(port, vaddr, count);
-+ __ixp4xx_writesw(addr, vaddr, count);
- #endif
- }
-
-@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel(cpu_to_le32(value), port);
- #else
-- __ixp4xx_writel(value, port);
-+ __ixp4xx_writel(value, addr);
- #endif
- }
-
-@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesl(addr, vaddr, count);
- #else
-- __ixp4xx_writesl(port, vaddr, count);
-+ __ixp4xx_writesl(addr, vaddr, count);
- #endif
- }
-
+++ /dev/null
---- linux-2.6.14.1/fs/jffs2/nodelist.h.orig 2005-11-09 23:12:29.641449728 -0800
-+++ linux-2.6.14.1/fs/jffs2/nodelist.h 2005-11-09 23:13:19.228570049 -0800
-@@ -44,7 +44,9 @@
- #define D2(x)
- #endif
-
--#define JFFS2_NATIVE_ENDIAN
-+#undef JFFS2_NATIVE_ENDIAN
-+#define JFFS2_BIG_ENDIAN 1
-+#undef JFFS2_LITTLE_ENDIAN
-
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
- whatever OS we're actually running on here too. */
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp
- * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board. Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
- *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+ /* This will cause the jiffies to drift unnecessarily. */
-+# error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required. The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values). The mathematics in
-+ * here require the following values. Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+# error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+ u32 reload;
-+
-+ /* Store the two effectively informational rate values, the
-+ * error calculation is (rate - count*HZ) (above), and rate
-+ * is changed first, this can cause a temporary error which
-+ * will be corrected on the next interrupt.
-+ */
-+ board_tick_rate = rate;
-+ board_tick_per_1000 = (rate+500)/1000;
-+
-+ /* Calculate the correct value to load into the timer countdown
-+ * register, the low two bits must be b01 (to enable the timer).
-+ * Select the top bits to be as close to the desired value as
-+ * possible.
-+ *
-+ * First find the best value, regardless of the low two bits -
-+ * this is the value used in the interrupt calculation even though
-+ * it cannot necessarily be set into the register.
-+ */
-+ timer_count = (rate + (HZ/2))/HZ;
-+
-+ /* Now the timer_ticks are being generated at this rate, calculate
-+ * an appropriate value for the register. This stores a 30 bit
-+ * value which gives a period of 4*x+1, we want:
-+ *
-+ * 4*x+1 = board_tick_rate/HZ
-+ *
-+ * This needs to be rounded to the closest 4*HZ value:
-+ *
-+ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+ * x = (board_tick_rate+HZ) / (4*HZ);
-+ */
-+ reload = (board_tick_rate + HZ) / HZ;
-+ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ *IXP4XX_OSRT1 = reload;
-
--static unsigned volatile last_jiffy_time;
-+ /* If the clock is drifing, look in syslog: */
-+ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
-
--#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above. Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+ return *IXP4XX_OSTS - last_timer_time;
-+}
-
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
-- u32 elapsed;
--
-- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+ /* Return the offset of the current time from the last time
-+ * timer tick in microseconds. This is only used for the
-+ * gettimeofday call.
-+ *
-+ * The result of this API is at most about 20000 (for a 50Hz
-+ * HZ - 20000 uS/tick), the input delta is at most about
-+ * 1.3M - 21 bits.
-+ */
-+ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+ /* return delta * 1000000 / board_tick_rate; */
-+ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
-
-- return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+ if (error >= HZ)
-+ return 1;
-+ else if (error <= -HZ)
-+ return -1;
-+ return 0;
- }
-
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+ u32 rate;
-+ u32 count;
-+ int error;
-+
- write_seqlock(&xtime_lock);
-
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-+ /* If the board tick rate has been changed update the cached
-+ * value.
-+ */
-+ if (ixp4xx_board_tick_rate != board_tick_rate) {
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-+ accumulated_error = 0;
-+ }
-+
- /*
- * Catch up with the real idea of time
-+ *
-+ * board_tick_rate: actual ixp4xx ticks/second, read-only
-+ * accumulated_error: aggregate error/tick * HZ, read/write
-+ * timer_count: best ixp4xx ticks per timer_tick, read-only
- */
-- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+ rate = board_tick_rate;
-+ error = accumulated_error;
-+ count = timer_count;
-+ do {
-+ u32 adjusted_count = count + adjustment(error);
-+ if (ixp4xx_timer_delta() < adjusted_count)
-+ break;
- timer_tick(regs);
-- last_jiffy_time += LATCH;
-- }
-+ last_timer_time += adjusted_count;
-+ error += rate - adjusted_count*HZ;
-+ } while (1);
-+ accumulated_error = error;
-
- write_sequnlock(&xtime_lock);
-
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
-+u32 ixp4xx_get_board_tick_rate(void) {
-+ return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+ ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
- /* Setup the Timer counter value */
-- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-
- /* Reset time-stamp counter */
- *IXP4XX_OSTS = 0;
-- last_jiffy_time = 0;
-+ last_timer_time = 0;
-+ accumulated_error = 0;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- ARRAY_SIZE(ixp46x_devices));
- }
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
-
- static void __init nslu2_init(void)
- {
-+ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+ * from the typical value.
-+ */
-+ ixp4xx_set_board_tick_rate(66000000);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- }
-
- if (value > 20 && value < 32767)
-- count = (NSLU2_FREQ / (value*4)) - 1;
-+ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
-
- spin_lock_irqsave(&beep_lock, flags);
-
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN 8
-
-
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
-
- #define NSLU2_GPIO0 0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
-
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt. Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
- */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
-
-+/* The following allow the exact board tick rate to be set and
-+ * discovered. The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
+++ /dev/null
---- linux-2.6.14-rc5/include/linux/spinlock_up.h 2005-10-26 08:37:20.164248408 -0700
-+++ patched/include/linux/spinlock_up.h 2005-10-26 12:15:13.458898975 -0700
-@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw
- lock->slock = 1;
- }
-
-+#else /* DEBUG_SPINLOCK */
-+#define __raw_spin_is_locked(lock) ((void)(lock), 0)
-+/* for sched.c and kernel_lock.c: */
-+# define __raw_spin_lock(lock) do { (void)(lock); } while (0)
-+# define __raw_spin_unlock(lock) do { (void)(lock); } while (0)
-+# define __raw_spin_trylock(lock) ({ (void)(lock); 1; })
-+#endif /* DEBUG_SPINLOCK */
-+
- /*
- * Read-write spinlocks. No debug version.
- */
-@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw
- #define __raw_read_unlock(lock) do { (void)(lock); } while (0)
- #define __raw_write_unlock(lock) do { (void)(lock); } while (0)
-
--#else /* DEBUG_SPINLOCK */
--#define __raw_spin_is_locked(lock) ((void)(lock), 0)
--/* for sched.c and kernel_lock.c: */
--# define __raw_spin_lock(lock) do { (void)(lock); } while (0)
--# define __raw_spin_unlock(lock) do { (void)(lock); } while (0)
--# define __raw_spin_trylock(lock) ({ (void)(lock); 1; })
--#endif /* DEBUG_SPINLOCK */
--
- #define __raw_read_can_lock(lock) (((void)(lock), 1))
- #define __raw_write_can_lock(lock) (((void)(lock), 1))
-
+++ /dev/null
---- linux-2.6.14-rc5/net/ipv4/route.c 2005-10-26 08:37:20.752285410 -0700
-+++ patched/net/ipv4/route.c 2005-10-26 12:17:00.761651111 -0700
-@@ -231,7 +231,7 @@ static spinlock_t *rt_hash_locks;
- spin_lock_init(&rt_hash_locks[i]); \
- }
- #else
--# define rt_hash_lock_addr(slot) NULL
-+# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL)
- # define rt_hash_lock_init()
- #endif
-
+++ /dev/null
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Kconfig test9/drivers/i2c/chips/Kconfig
---- linux-2.6.14-rc3/drivers/i2c/chips/Kconfig 2005-10-01 13:46:50.000000000 +0200
-+++ test9/drivers/i2c/chips/Kconfig 2005-10-03 16:10:22.000000000 +0200
-@@ -126,4 +126,13 @@
- This driver can also be built as a module. If so, the module
- will be called max6875.
-
-+config SENSORS_X1205
-+ tristate "Xicor X1205 RTC chip"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for the Xicor X1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called x1205
-+
- endmenu
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Makefile test9/drivers/i2c/chips/Makefile
---- linux-2.6.14-rc3/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200
-+++ test9/drivers/i2c/chips/Makefile 2005-10-01 15:30:06.000000000 +0200
-@@ -13,6 +13,7 @@
- obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
- obj-$(CONFIG_TPS65010) += tps65010.o
-+obj-$(CONFIG_SENSORS_X1205) += x1205.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/x1205.c test9/drivers/i2c/chips/x1205.c
---- linux-2.6.14-rc3/drivers/i2c/chips/x1205.c 1970-01-01 01:00:00.000000000 +0100
-+++ test9/drivers/i2c/chips/x1205.c 2005-10-03 16:02:57.000000000 +0200
-@@ -0,0 +1,612 @@
-+/*
-+ * linux/drivers/i2c/chips/x1205.c
-+ *
-+ * x1205.c - An 12c driver for the Xicor X1205 RTC
-+ * Copyright 2004 Karen Spearel
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * please send all reports to:
-+ * kas11 at tampabay dot rr dot com
-+ * a dot zummo at towertech dot it
-+ *
-+ * based on the other drivers in this same directory.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/list.h>
-+
-+#include <linux/x1205.h>
-+
-+#define EPOCH_1900 1900
-+#define EPOCH_1970 1970
-+
-+#define DRIVER_VERSION "0.9.6"
-+#define DRIVER_NAME (x1205_driver.name)
-+
-+
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* Prototypes */
-+
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+static int x1205_validate_client(struct i2c_client *client);
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ u8 reg_base);
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base);
-+static int x1205_validate_tm(struct rtc_time *tm);
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
-+static int x1205_hctosys(struct i2c_client *client);
-+
-+
-+static struct i2c_driver x1205_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "x1205",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &x1205_attach,
-+ .detach_client = &x1205_detach,
-+/* .command = &x1205_command,*/
-+};
-+
-+struct x1205_data {
-+ struct i2c_client client;
-+ struct list_head list;
-+ unsigned int epoch;
-+};
-+
-+
-+static const unsigned char days_in_mo[] =
-+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-+
-+static LIST_HEAD(x1205_clients);
-+
-+/* Workaround until the I2C subsytem will allow to send
-+ * commands to a specific client. This function will send the command
-+ * to the first client.
-+ */
-+
-+int x1205_do_command(unsigned int cmd, void *arg)
-+{
-+ struct list_head *walk;
-+ struct list_head *tmp;
-+ struct x1205_data *data;
-+
-+ list_for_each_safe(walk, tmp, &x1205_clients) {
-+ data = list_entry(walk, struct x1205_data, list);
-+ return x1205_command(&data->client, cmd, arg);
-+ }
-+
-+ return -ENODEV;
-+}
-+
-+
-+/*
-+ * in the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is inited as 2000. Time is set to UT
-+ */
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ u8 reg_base)
-+{
-+ static unsigned char dt_addr[] = { 0, };
-+ static unsigned char sr_addr[] = { 0, };
-+
-+ unsigned char buf[8], sr;
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, sr_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &sr },
-+ { client->addr, 0, 2, dt_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 8, buf },
-+ };
-+
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-+
-+ dt_addr[1] = reg_base;
-+ sr_addr[1] = X1205_REG_SR;
-+
-+ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
-+ ARRAY_SIZE(msgs)) {
-+ /* did we read the correct number of messages? */
-+
-+ /* check for battery failure */
-+ if (sr & X1205_SR_RTCF)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Clock had a power failure, you must set the date.\n",
-+ DRIVER_NAME);
-+
-+ return -EINVAL;
-+ }
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec-%02x min-%02x hr-%02x"
-+ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ buf[CCR_HOUR] &= ~X1205_HR_MIL;
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
-+ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ } else {
-+ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base)
-+{
-+ int i, err, xfer;
-+
-+ static unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-+
-+
-+ static unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-+
-+ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+ static unsigned char data[3] = { 0, };
-+ static unsigned char buf[8];
-+
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-+
-+ if ((err = x1205_validate_tm(tm)) < 0)
-+ return err;
-+
-+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* Set 24HR format */
-+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+ if (datetoo == X1205_DATETOO) {
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+
-+ /* month, 0 - 11 */
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */
-+
-+ /* year, since 1900 */
-+ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
-+ buf[CCR_WDAY] = tm->tm_wday & 7;
-+ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100);
-+ }
-+
-+ xfer = i2c_master_send(client, wel, 3);
-+ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-+
-+ xfer = i2c_master_send(client, rwel, 3);
-+ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-+
-+ for (i = 0; i < 8; i++) {
-+ data[1] = i + reg_base;
-+ data[2] = buf[i];
-+ xfer = i2c_master_send(client, data, 3);
-+
-+ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n",
-+ __FUNCTION__,
-+ xfer, data[1], data[2]);
-+
-+ if (xfer != 3)
-+ return -EIO;
-+ };
-+
-+ xfer = i2c_master_send(client, diswe, 3);
-+ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-+
-+ return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+
-+ struct rtc_time tm;
-+ struct timespec tv;
-+
-+
-+ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
-+
-+ if (err)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Unable to set the system clock\n",
-+ DRIVER_NAME);
-+
-+ return err;
-+
-+ }
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether
-+ * it stores the most close value or the value with partial seconds
-+ * truncated, however it is important for x1205_sync_rtc that it be
-+ * defined to store the truncated value. This is because otherwise it
-+ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
-+ * sync function, and atomic reads of >32bits on ARM are not possible.
-+ * So storing the most close value would slow down the sync API. So
-+ * Here we have the truncated value and the best guess is to add 0.5s
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ /* WARNING: this is not the C library 'mktime' call, it is a built in
-+ * inline function from include/linux/time.h. It expects (requires)
-+ * the month to be in the range 1-12
-+ */
-+
-+ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour,
-+ tm.tm_min, tm.tm_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->adapter->dev,
-+ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ DRIVER_NAME,
-+ tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+struct x1205_limit
-+{
-+ unsigned char reg;
-+ unsigned char mask;
-+ unsigned char min;
-+ unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+ int i, xfer;
-+
-+ /* Probe array. We will read the register at the specified
-+ * address and check if the given bits are zero.
-+ */
-+
-+ const unsigned char probe_zero_pattern[] = {
-+
-+ X1205_REG_SR, 0x18,
-+ X1205_REG_Y2K, 0xC6,
-+ X1205_REG_DW, 0xF8,
-+ X1205_REG_MO, 0xE0,
-+ X1205_REG_DT, 0xC0,
-+ X1205_REG_HR, 0x40,
-+ X1205_REG_MN, 0x80,
-+ X1205_REG_SC, 0x80,
-+ X1205_REG_DTR, 0xF8,
-+ X1205_REG_ATR, 0xC0,
-+ X1205_REG_INT, 0x18,
-+ X1205_REG_0, 0xFF,
-+ X1205_REG_Y2K1, 0xC6,
-+ X1205_REG_DWA1, 0x78,
-+ X1205_REG_MOA1, 0x60,
-+ X1205_REG_DTA1, 0x40,
-+ X1205_REG_HRA1, 0x40,
-+ X1205_REG_Y2K0, 0xC6,
-+ X1205_REG_DWA0, 0x78,
-+ X1205_REG_MOA0, 0x60,
-+ X1205_REG_DTA0, 0x40,
-+ X1205_REG_HRA0, 0x40,
-+ };
-+
-+ const struct x1205_limit probe_limits_pattern[] = {
-+ /* register, mask, min, max */
-+ { X1205_REG_Y2K, 0xFF, 19, 20 },
-+ { X1205_REG_DW, 0xFF, 0, 6 },
-+ { X1205_REG_YR, 0xFF, 0, 99 },
-+ { X1205_REG_MO, 0xFF, 0, 12 },
-+ { X1205_REG_DT, 0xFF, 0, 31 },
-+ { X1205_REG_HR, 0x7F, 0, 23 },
-+ { X1205_REG_MN, 0xFF, 0, 59 },
-+ { X1205_REG_SC, 0xFF, 0, 59 },
-+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_DWA1, 0x7F, 0, 6 },
-+ { X1205_REG_MOA1, 0x7F, 0, 12 },
-+ { X1205_REG_DTA1, 0x7F, 0, 31 },
-+ { X1205_REG_HRA1, 0x7F, 0, 23 },
-+ { X1205_REG_MNA1, 0x7F, 0, 59 },
-+ { X1205_REG_SCA1, 0x7F, 0, 59 },
-+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ { X1205_REG_DWA0, 0x7F, 0, 6 },
-+ { X1205_REG_MOA0, 0x7F, 0, 12 },
-+ { X1205_REG_DTA0, 0x7F, 0, 31 },
-+ { X1205_REG_HRA0, 0x7F, 0, 23 },
-+ { X1205_REG_MNA0, 0x7F, 0, 59 },
-+ { X1205_REG_SCA0, 0x7F, 0, 59 },
-+ };
-+
-+ /* check that registers have bits a 0 where expected */
-+
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
-+ {
-+ unsigned char buf;
-+
-+ static unsigned char addr[2];
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ addr[0] = 0x00;
-+ addr[1] = probe_zero_pattern[i];
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ if ((buf & probe_zero_pattern[i+1]) != 0) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register %x, zero pattern %d: %x\n",
-+ __FUNCTION__, addr[1], i, buf);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ /* check limits */
-+
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
-+ {
-+ unsigned char buf, val;
-+
-+ static unsigned char addr[2];
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ addr[0] = 0x00;
-+ addr[1] = probe_limits_pattern[i].reg;
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ val = BCD2BIN(buf & probe_limits_pattern[i].mask);
-+
-+ if (val > probe_limits_pattern[i].max ||
-+ val < probe_limits_pattern[i].min) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register %x, lim pattern %d: %d\n",
-+ __FUNCTION__, addr[1], i, val);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ struct i2c_client *new_client;
-+ struct x1205_data *xdata;
-+
-+ int err = 0;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* Fill our data structure */
-+
-+ memset(xdata, 0, sizeof(struct x1205_data));
-+
-+ xdata->epoch = 2000;
-+
-+
-+ /* Prepare i2c_client structure */
-+
-+ new_client = &xdata->client;
-+ i2c_set_clientdata(new_client, xdata);
-+ new_client->addr = address;
-+ new_client->adapter = adapter;
-+ new_client->driver = &x1205_driver;
-+ new_client->flags = 0;
-+
-+ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
-+
-+
-+ /* Verify the chip is really an X1205 */
-+
-+ if (kind < 0)
-+ {
-+ if (x1205_validate_client(new_client) < 0) {
-+ err = -ENODEV;
-+ goto exit_kfree;
-+ }
-+ }
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(new_client)))
-+ goto exit_kfree;
-+
-+ list_add(&xdata->list, &x1205_clients);
-+
-+ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
-+ DRIVER_NAME);
-+
-+ /* If requested, se the system time */
-+ if (hctosys)
-+ x1205_hctosys(new_client);
-+
-+ return 0;
-+
-+exit_kfree:
-+ kfree(xdata);
-+
-+exit:
-+ return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct x1205_data *data = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ list_del(&data->list);
-+ kfree(data);
-+ return 0;
-+}
-+
-+/* make sure the rtc_time values are in bounds */
-+static int x1205_validate_tm(struct rtc_time *tm)
-+{
-+ tm->tm_year += 1900;
-+
-+ if (tm->tm_year < EPOCH_1970)
-+ return -EINVAL;
-+
-+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+ return -EINVAL;
-+
-+ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) &&
-+ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
-+ return -EINVAL;
-+
-+ if ((tm->tm_year -= EPOCH_1900) > 255)
-+ return -EINVAL;
-+
-+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
-+{
-+ if (client == NULL || tm == NULL)
-+ return -EINVAL;
-+
-+ if (!capable(CAP_SYS_TIME))
-+ return -EACCES;
-+
-+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
-+
-+ switch (cmd) {
-+ case X1205_CMD_GETDATETIME:
-+ return x1205_get_datetime(client, tm, X1205_CCR_BASE);
-+
-+ case X1205_CMD_SETTIME:
-+ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
-+
-+ case X1205_CMD_SETDATETIME:
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
-+
-+ case X1205_CMD_GETALARM:
-+ return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
-+
-+ case X1205_CMD_SETALARM:
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+
-+static int __init x1205_init(void)
-+{
-+ return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+ i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+ "Karen Spearel <kas11@tampabay.rr.com>, "
-+ "Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+
-+EXPORT_SYMBOL_GPL(x1205_do_command);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- linux-2.6.14-rc3/include/linux/x1205.h 1970-01-01 01:00:00.000000000 +0100
-+++ test9/include/linux/x1205.h 2005-10-03 15:38:21.000000000 +0200
-@@ -0,0 +1,67 @@
-+
-+/* commands */
-+
-+#define X1205_CMD_GETDATETIME 0
-+#define X1205_CMD_SETTIME 1
-+#define X1205_CMD_SETDATETIME 2
-+#define X1205_CMD_GETALARM 3
-+#define X1205_CMD_SETALARM 4
-+
-+/* flags */
-+
-+#define X1205_NODATE 0
-+#define X1205_DATETOO 1
-+
-+/* offsets into read buf - add 2 for write buf */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */
-+
-+#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */
-+
-+extern int x1205_do_command(unsigned int cmd, void *arg);
-+
+++ /dev/null
---- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option
-
- comment "IXP4xx Platforms"
-
-+# This entry is placed on top because otherwise it would have
-+# been shown as a submenu.
-+config MACH_NSLU2
-+ bool
-+ prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys's
-+ NSLU2 NAS device. For more information on this platform,
-+ see http://www.nslu2-linux.org
-+
- config ARCH_AVILA
- bool "Avila"
- help
---- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-pci.c
-+ *
-+ * NSLU2 board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init nslu2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
-+
-+ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-+ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-+ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-+
-+ /* INTD is not configured as GPIO is used
-+ * for the power input button.
-+ */
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-+ IRQ_NSLU2_PCI_INTA,
-+ IRQ_NSLU2_PCI_INTB,
-+ IRQ_NSLU2_PCI_INTC,
-+ };
-+
-+ int irq = -1;
-+
-+ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-+ irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
-+ }
-+
-+ return irq;
-+}
-+
-+struct hw_pci __initdata nslu2_pci = {
-+ .nr_controllers = 1,
-+ .preinit = nslu2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = nslu2_map_irq,
-+};
-+
-+int __init nslu2_pci_init(void) /* monkey see, monkey do */
-+{
-+ if (machine_is_nslu2())
-+ pci_common_init(&nslu2_pci);
-+
-+ return 0;
-+}
-+
-+subsys_initcall(nslu2_pci_init);
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,92 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-power.c
-+ *
-+ * NSLU2 Power/Reset driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly.
-+ */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_power_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
-+
-+ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-+ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-+
-+ gpio_line_isr_clear(NSLU2_RB_GPIO);
-+ gpio_line_isr_clear(NSLU2_PB_GPIO);
-+
-+ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-+ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ NSLU2_RB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-+ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ NSLU2_PB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit nslu2_power_exit(void)
-+{
-+ free_irq(NSLU2_RB_IRQ, NULL);
-+ free_irq(NSLU2_PB_IRQ, NULL);
-+}
-+
-+module_init(nslu2_power_init);
-+module_exit(nslu2_power_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-setup.c
-+ *
-+ * NSLU2 board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Mark Rakes <mrakes at mac.com>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
-+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data nslu2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource nslu2_flash_resource = {
-+ .start = NSLU2_FLASH_BASE,
-+ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device nslu2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_flash_data,
-+ .num_resources = 1,
-+ .resource = &nslu2_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+ .sda_pin = NSLU2_SDA_PIN,
-+ .scl_pin = NSLU2_SCL_PIN,
-+};
-+
-+static struct platform_device nslu2_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_i2c_gpio_pins,
-+ .num_resources = 0,
-+};
-+
-+static struct resource nslu2_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port nslu2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device nslu2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = nslu2_uart_data,
-+ .num_resources = 2,
-+ .resource = nslu2_uart_resources,
-+};
-+
-+static struct platform_device *nslu2_devices[] __initdata = {
-+ &nslu2_i2c_controller,
-+ &nslu2_flash,
-+ &nslu2_uart,
-+};
-+
-+static void nslu2_power_off(void)
-+{
-+ /* This causes the box to drop the power and go dead. */
-+
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* do the deed */
-+ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init nslu2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pm_power_off = nslu2_power_off;
-+
-+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+}
-+
-+MACHINE_START(NSLU2, "Linksys NSLU2")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_ram = PHYS_OFFSET,
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .init_machine = nslu2_init,
-+MACHINE_END
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000
-@@ -44,5 +44,6 @@ extern unsigned int processor_id;
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000
-@@ -93,4 +93,11 @@
- #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
- #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
-
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
-+
- #endif
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nslu2.h
-+ *
-+ * NSLU2 platform specific definitions
-+ *
-+ * Author: Mark Rakes <mrakes AT mac.com>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * based on ixdp425.h:
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NSLU2_SDA_PIN 7
-+#define NSLU2_SCL_PIN 6
-+
-+/*
-+ * NSLU2 PCI IRQs
-+ */
-+#define NSLU2_PCI_MAX_DEV 3
-+#define NSLU2_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NSLU2_PCI_INTA_PIN 11
-+#define NSLU2_PCI_INTB_PIN 10
-+#define NSLU2_PCI_INTC_PIN 9
-+#define NSLU2_PCI_INTD_PIN 8
-+
-+
-+/* NSLU2 Timer */
-+#define NSLU2_FREQ 66000000
-+#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+
-+/* GPIO */
-+
-+#define NSLU2_GPIO0 0
-+#define NSLU2_GPIO1 1
-+#define NSLU2_GPIO2 2
-+#define NSLU2_GPIO3 3
-+#define NSLU2_GPIO4 4
-+#define NSLU2_GPIO5 5
-+#define NSLU2_GPIO6 6
-+#define NSLU2_GPIO7 7
-+#define NSLU2_GPIO8 8
-+#define NSLU2_GPIO9 9
-+#define NSLU2_GPIO10 10
-+#define NSLU2_GPIO11 11
-+#define NSLU2_GPIO12 12
-+#define NSLU2_GPIO13 13
-+#define NSLU2_GPIO14 14
-+#define NSLU2_GPIO15 15
-+
-+/* Buttons */
-+
-+#define NSLU2_PB_GPIO NSLU2_GPIO5
-+#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
-+#define NSLU2_RB_GPIO NSLU2_GPIO12
-+
-+#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
-+#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
-+
-+#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO)
-+#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO)
-+#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO)
-+
-+/* Buzzer */
-+
-+#define NSLU2_GPIO_BUZZ 4
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+/* LEDs */
-+
-+#define NSLU2_LED_RED NSLU2_GPIO0
-+#define NSLU2_LED_GRN NSLU2_GPIO1
-+
-+#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
-+#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
-+
-+#define NSLU2_LED_DISK1 NSLU2_GPIO2
-+#define NSLU2_LED_DISK2 NSLU2_GPIO3
-+
-+#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
-+#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
-+
-+
+++ /dev/null
---- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.171472071 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:52.923187955 -0700
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
-
---- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:19:43.443489188 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:23:52.923187955 -0700
-@@ -0,0 +1,113 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-rtc.c
-+ *
-+ * NSLU2 RTC driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on x1205-rtc.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/time.h>
-+#include <linux/rtc.h>
-+#include <linux/init.h>
-+
-+#include <linux/x1205.h>
-+
-+#include <asm/rtc.h>
-+#include <asm/mach-types.h>
-+
-+extern int (*set_rtc)(void);
-+
-+static int nslu2_set_rtc(void)
-+{
-+ struct rtc_time new_tm, old_tm;
-+ unsigned long cur_secs = xtime.tv_sec;
-+
-+ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
-+ return 0;
-+
-+ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+ new_tm.tm_sec = cur_secs % 60;
-+ cur_secs /= 60;
-+ new_tm.tm_min = cur_secs % 60;
-+ cur_secs /= 60;
-+ new_tm.tm_hour = cur_secs % 24;
-+
-+ /*
-+ * avoid writing when we're going to change the day
-+ * of the month. We will retry in the next minute.
-+ * This basically means that if the RTC must not drift
-+ * by more than 1 minute in 11 minutes.
-+ */
-+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+ return 1;
-+
-+ return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
-+}
-+
-+static int rtc_read_alarm(struct rtc_wkalrm *alrm)
-+{
-+ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
-+}
-+
-+static int rtc_set_alarm(struct rtc_wkalrm *alrm)
-+{
-+ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
-+}
-+
-+static int rtc_read_time(struct rtc_time *tm)
-+{
-+ return x1205_do_command(X1205_CMD_GETDATETIME, tm);
-+}
-+
-+static int rtc_set_time(struct rtc_time *tm)
-+{
-+ return x1205_do_command(X1205_CMD_SETDATETIME, tm);
-+}
-+
-+static struct rtc_ops rtc_ops = {
-+ .owner = THIS_MODULE,
-+ .read_time = rtc_read_time,
-+ .set_time = rtc_set_time,
-+ .read_alarm = rtc_read_alarm,
-+ .set_alarm = rtc_set_alarm,
-+};
-+
-+static int __init nslu2_rtc_init(void)
-+{
-+ int ret;
-+
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: rtc\n");
-+
-+ if ((ret = register_rtc(&rtc_ops)) != 0)
-+ return ret;
-+
-+ set_rtc = nslu2_set_rtc;
-+
-+ return 0;
-+}
-+
-+static void __exit nslu2_rtc_exit(void)
-+{
-+ set_rtc = NULL;
-+
-+ unregister_rtc(&rtc_ops);
-+}
-+
-+module_init(nslu2_rtc_init);
-+module_exit(nslu2_rtc_exit);
+++ /dev/null
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig 2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/drivers/input/misc/Kconfig 2005-10-26 15:24:01.199708764 -0700
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- tristate "M68k Beeper support"
- depends on M68K
-
-+config INPUT_NSLU2_BEEPER
-+ tristate "NSLU2 Beeper support"
-+ depends on MACH_NSLU2
-+ help
-+ Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+ to be used for bells and whistles.
-+
-+ If unsure, say Y.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- tristate "User level driver support"
- help
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile 2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/drivers/input/misc/Makefile 2005-10-26 15:24:01.199708764 -0700
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
- obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT) += uinput.o
- obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c 2005-10-26 15:19:43.711506053 -0700
-+++ linux-2.6.13/drivers/input/misc/nslu2spkr.c 2005-10-26 15:24:01.199708764 -0700
-@@ -0,0 +1,144 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+ unsigned int count = 0;
-+ unsigned long flags;
-+
-+ if (type != EV_SND)
-+ return -1;
-+
-+ switch (code) {
-+ case SND_BELL:
-+ if (value) value = 1000;
-+ case SND_TONE:
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ if (value > 20 && value < 32767)
-+ count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+ spin_lock_irqsave(&beep_lock, flags);
-+
-+ if (count) {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+ } else {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+ *IXP4XX_OSRT2 = 0;
-+ }
-+
-+ spin_unlock_irqrestore(&beep_lock, flags);
-+
-+ return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+ .phys = "ixp420/gpio4",
-+ .name = "NSLU2 Beeper",
-+ .evbit[0] = BIT(EV_SND),
-+ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE),
-+ .event = nslu2_spkr_event,
-+ .id = {
-+ .bustype = BUS_HOST,
-+ .vendor = 0x001f,
-+ .product = 0x0001,
-+ .version = 0x0100
-+ }
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* clear interrupt */
-+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+ /* flip the beeper output */
-+ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+ SA_INTERRUPT | SA_TIMER, "NSLU2 beeper", NULL < 0)) {
-+
-+ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+ IRQ_IXP4XX_TIMER2);
-+
-+ return -EIO;
-+ }
-+
-+ input_register_device(&nslu2_spkr_dev);
-+
-+ /* do a little beep to tell the world we are alive */
-+ if (beep_on_startup)
-+ {
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+ msleep(120);
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+ }
-+
-+ printk(KERN_INFO "NSLU2: beeper\n");
-+ return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+ input_unregister_device(&nslu2_spkr_dev);
-+
-+ disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+ /* turn it off */
-+ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+ free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.443489188 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:08.652177718 -0700
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
-
---- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:19:43.979522918 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:24:08.652177718 -0700
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+//
-+//=============================================================================
-+// GPIO Function State
-+// 0 Red LED Status
-+// 1 Green LED Ready = 1
-+// 2 Disk 2 LED On = 0
-+// 3 Disk 1 LED On = 0
-+// 4 Buzzer
-+// 5 Power Button Pressed = 1
-+// 8 Power Down Output = 1 powers down NSLU2
-+// 12 Reset Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION "0.1.7"
-+
-+#define NSLU2BZ_MAJOR 62 //buzzer
-+#define NSLU2LM_MAJOR 126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG 2000
-+#define NSLU2_BEEP_DUR_MED 400
-+#define NSLU2_BEEP_DUR_SHORT 100
-+#define NSLU2_BEEP_PITCH_HIGH 250
-+#define NSLU2_BEEP_PITCH_MED 500
-+#define NSLU2_BEEP_PITCH_LOW 1000
-+#define NSLU2_LONG_DELAY 30000
-+
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
-+#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF _IOW('M',32,long)
-+#define NSLU2LM_ON _IOW('M',33,long)
-+#define NSLU2LM_BLINK _IOW('M',34,long)
-+#define NSLU2LM_ALT _IOW('M',35,long)
-+#define NSLU2LM_ALL_ON _IO('M',36)
-+#define NSLU2LM_ALL_OFF _IO('M',37)
-+
-+#define PHYS_LEDS 4
-+#define BLINK_DELAY 25
-+
-+// OR Masks to turn these LEDs ON
-+
-+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
-+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
-+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
-+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
-+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
-+#define RS_GRN_TGL 0x00000002
-+#define RS_RED_TGL 0x00000001
-+#define DISK1_TGL 0x00000008
-+#define DISK2_TGL 0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED 0
-+#define LED_RS_GRN 1
-+#define LED_DISK1 2
-+#define LED_DISK2 3
-+#define LED_ALL 4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer; //rs green
-+static struct timer_list n2lm_rsr_timer; //rs red
-+static struct timer_list n2lm_d1_timer; //drive 1
-+static struct timer_list n2lm_d2_timer; //drive 2
-+static struct timer_list n2bz_timer; //beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit. No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
-+ add_timer(&n2lm_rsg_timer); //reinit timer
-+ return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ return;
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+ switch(led) {
-+ case LED_RS_RED:
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ break;
-+
-+ case LED_RS_GRN:
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsg_timer);
-+ break;
-+
-+ case LED_DISK1:
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ break;
-+
-+ case LED_DISK2:
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+ switch (led) {
-+ case LED_RS_RED:
-+ del_timer(&n2lm_rsr_timer);
-+ break;
-+ case LED_RS_GRN:
-+ del_timer(&n2lm_rsg_timer);
-+ break;
-+ case LED_DISK1:
-+ del_timer(&n2lm_d1_timer);
-+ break;
-+ case LED_DISK2:
-+ del_timer(&n2lm_d2_timer);
-+ break;
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+ return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
-+ return;
-+ case LED_ALL: //all green
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+ return;
-+ }
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
-+ return;
-+ case LED_ALL:
-+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+ }
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+
-+ if (led < 0 || led >= PHYS_LEDS)
-+ return -EINVAL;
-+
-+ switch (cmd ) {
-+ case NSLU2LM_ON:
-+ n2lm_timer_stop(led);
-+ n2lm_ledon(led);
-+ break;
-+
-+ case NSLU2LM_OFF:
-+ n2lm_timer_stop(led);
-+ n2lm_ledoff(led);
-+ break;
-+
-+ case NSLU2LM_BLINK:
-+ n2lm_ledon(led);
-+ if (led == LED_RS_RED)
-+ n2lm_rsr_timer.data = RS_RED_TGL;
-+ n2lm_timer_start(led);
-+ break;
-+
-+ case NSLU2LM_ALT:
-+ if (led == LED_RS_RED)
-+ {
-+ n2lm_ledon(LED_RS_GRN);
-+ n2lm_ledoff(LED_RS_RED);
-+ n2lm_rsr_timer.data = RS_RG_ALT;
-+ n2lm_timer_start(LED_RS_RED);
-+ break;
-+ } else
-+ return -EINVAL;
-+
-+ case NSLU2LM_ALL_ON:
-+ n2lm_timer_stop_all();
-+ n2lm_ledon(LED_ALL);
-+ break;
-+
-+ case NSLU2LM_ALL_OFF:
-+ n2lm_timer_stop_all();
-+ n2lm_ledoff(LED_ALL);
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
-+// important should be haprepening.
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+ int i;
-+
-+ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+
-+ for (i = 1; i < duration; i++) {
-+ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ }
-+ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+ return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+ if (--bz_repeatcnt > 0) { //if just one beep left to do
-+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
-+ add_timer(&n2bz_timer); //reinit timer
-+ }
-+ n2_buzz(tone/2, ontime);
-+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+ switch (cmd) {
-+ case NSLU2BZ_BEEP:
-+ n2_buzz(tone/2, ontime);
-+ break;
-+
-+ case NSLU2BZ_BEEP_STOP:
-+ del_timer(&n2bz_timer);
-+ break;
-+
-+ case NSLU2BZ_BEEPS:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ n2bz_handler(0);
-+ break;
-+
-+ case NSLU2BZ_TONESET:
-+ if (param >= 250 && param <= 2000)
-+ tone = param;
-+ break;
-+
-+ case NSLU2BZ_ONTIME:
-+ if (param > 4 && param < 201)
-+ ontime = param;
-+ break;
-+
-+ case NSLU2BZ_SILENTTIME:
-+ if (param > ontime) //enforce a reasonable duty cycle
-+ offtime = param;
-+ else
-+ offtime = ontime;
-+ break;
-+
-+ case NSLU2BZ_REPEATCNT:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ break;
-+
-+ case NSLU2BZ_COMBINED:
-+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
-+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
-+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
-+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+ init_timer(&n2lm_rsg_timer);
-+ init_timer(&n2lm_rsr_timer);
-+ init_timer(&n2lm_d1_timer);
-+ init_timer(&n2lm_d2_timer);
-+
-+ n2lm_rsr_timer.function = n2lm_rsr_handler;
-+ n2lm_rsg_timer.function = n2lm_rsg_handler;
-+ n2lm_d2_timer.function = n2lm_d2_handler;
-+ n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+ init_timer(&n2bz_timer);
-+ n2bz_timer.function = n2bz_handler;
-+
-+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
-+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
-+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+ n2lm_ledon(LED_ALL);
-+ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+ n2lm_ledoff(LED_ALL);
-+
-+ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+ n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+
-+ n2iom_initarch();
-+
-+ n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ }
-+#endif
-+
-+ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ }
-+
-+ return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+
-+ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+ class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig 2005-10-26 15:19:34.490925838 -0700
-+++ linux-2.6.13/arch/arm/Kconfig 2005-10-26 15:24:18.628805508 -0700
-@@ -389,7 +389,8 @@ config LEDS
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+ MACH_NSLU2
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-@@ -403,7 +404,7 @@ config LEDS
-
- config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- depends on LEDS
- default y if ARCH_EBSA110
- help
-@@ -419,7 +420,8 @@ config LEDS_TIMER
-
- config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+ || MACH_NSLU2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.979522918 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:18.632805759 -0700
-@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
-
-+leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
-+obj-$(CONFIG_LEDS) += $(leds-y)
-+
-+
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:19:44.251540035 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:24:18.632805759 -0700
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ * Copyright (C) 1998-1999 Russell King
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED 0x01
-+#define LED_STATE_CLAIMED 0x02
-+#define LED_STATE_IDLE 0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+static const unsigned long idle_seq[4] = {
-+
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds_lock, flags);
-+
-+ switch (evt) {
-+ case led_start:
-+ /* Let's rock! Red led on, all others off. Remember
-+ * that disk1/disk2 works inverted. On the NSLU2, the
-+ * interface starts in a claimed state. XXX
-+ */
-+ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
-+ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+ | NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_stop:
-+ led_state &= ~LED_STATE_ENABLED;
-+ break;
-+
-+ case led_claim:
-+ /* The user claimed the interface, red and green off */
-+ led_state |= LED_STATE_CLAIMED;
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_release:
-+ /* The user released the interface, preserve the last
-+ * status of the leds, except red/green.
-+ */
-+ led_state &= ~LED_STATE_CLAIMED;
-+ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer:
-+ /* Pulse green led */
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ {
-+ /* clear red and green bits */
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+ /* copy the right sequence in */
-+ if (led_state & LED_STATE_IDLE)
-+ hw_led_state |= idle_seq[led_count % 4];
-+ else
-+ hw_led_state |= busy_seq[led_count % 4];
-+
-+ led_count++;
-+ }
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+
-+ case led_idle_start:
-+ led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red off */
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+
-+ case led_idle_end:
-+ led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red on -> amber on */
-+ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+#endif
-+
-+ case led_halted:
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ /* leds */
-+
-+ case led_green_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_green_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_amber_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_amber_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_red_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_red_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&leds_lock, flags);
-+
-+ if (led_state & LED_STATE_ENABLED) {
-+ spin_lock_irqsave(&gpio_lock, flags);
-+ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+ spin_unlock_irqrestore(&gpio_lock, flags);
-+ }
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+ void *ptr)
-+{
-+ leds_event(led_green_off);
-+ leds_event(led_red_on);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+ .notifier_call = nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: leds\n");
-+
-+ /* register panic notifier */
-+ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+ /* enable gpio 0-3 */
-+ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+ leds_event = nslu2_leds_event;
-+
-+ /* this will also initialize the leds to the
-+ * default state.
-+ */
-+
-+ leds_event(led_start);
-+
-+ return 0;
-+}
-+
-+module_init(nslu2_leds_init);
-+
+++ /dev/null
---- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700
-@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
- #ifdef __ARMEB__
- *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
- #else
-- *PCI_CSR = PCI_CSR_IC;
-+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
- #endif
-
- pr_debug("DONE\n");
+++ /dev/null
-*** linux-2.6.13/drivers/usb/net/pegasus.h.orig Mon Aug 29 01:41:01 2005
---- linux-2.6.13/drivers/usb/net/pegasus.h Sat Oct 22 20:51:29 2005
-***************
-*** 181,186 ****
---- 181,188 ----
- DEFAULT_GPIO_RESET )
- PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
- DEFAULT_GPIO_RESET | PEGASUS_II )
-+ PEGASUS_DEV( "Philips CPWUE01/00 USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
-+ DEFAULT_GPIO_RESET | PEGASUS_II )
- PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
- VENDOR_ADMTEK, 0x8511,
- DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 28 18:53:25 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3218/1
-
-PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:
-
-CC [M] sound/core/memory.o
-In file included from include/asm/memory.h:27,
-from include/asm/io.h:28,
-from sound/core/memory.c:24:
-include/asm/arch/memory.h: In function `__arch_adjust_zones':
-include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
-in this function)
-
-This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:
-
-Russell King wrote:
-> The error you see came up on SA1100. The best solution was to move
-> the __arch_adjust_zones() function out of line. I suggest ixp4xx
-> does the same.
-
-I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-
---- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h~ 2005-12-30 05:18:27.000000000 +1030
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h 2005-12-30 05:36:04.000000000 +1030
-@@ -16,31 +16,10 @@
-
- #ifndef __ASSEMBLY__
-
--/*
-- * Only first 64MB of memory can be accessed via PCI.
-- * We use GFP_DMA to allocate safe buffers to do map/unmap.
-- * This is really ugly and we need a better way of specifying
-- * DMA-capable regions of memory.
-- */
--static inline void __arch_adjust_zones(int node, unsigned long *zone_size,
-- unsigned long *zhole_size)
--{
-- unsigned int sz = SZ_64M >> PAGE_SHIFT;
--
-- /*
-- * Only adjust if > 64M on current system
-- */
-- if (node || (zone_size[0] <= sz))
-- return;
--
-- zone_size[1] = zone_size[0] - sz;
-- zone_size[0] = sz;
-- zhole_size[1] = zhole_size[0];
-- zhole_size[0] = 0;
--}
-+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
- #define arch_adjust_zones(node, size, holes) \
-- __arch_adjust_zones(node, size, holes)
-+ ixp4xx_adjust_zones(node, size, holes)
-
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
---- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c~ 2005-12-30 05:16:03.000000000 +1030
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c 2005-12-30 05:43:55.000000000 +1030
-@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev,
- return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
- }
-
-+/*
-+ * Only first 64MB of memory can be accessed via PCI.
-+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
-+ * This is really ugly and we need a better way of specifying
-+ * DMA-capable regions of memory.
-+ */
-+void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
-+ unsigned long *zhole_size)
-+{
-+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
-+
-+ /*
-+ * Only adjust if > 64M on current system
-+ */
-+ if (node || (zone_size[0] <= sz))
-+ return;
-+
-+ zone_size[1] = zone_size[0] - sz;
-+ zone_size[0] = sz;
-+ zhole_size[1] = zhole_size[0];
-+ zhole_size[0] = 0;
-+}
-+
- void __init ixp4xx_pci_preinit(void)
- {
- unsigned long processor_id;
+++ /dev/null
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c). If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken. The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- i = numslots;
- break;
- }
-- if (!memcmp(buf[i].name, "FIS directory", 14))
-+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+ /* This is apparently the FIS directory entry for the
-+ * FIS directory itself. The FIS directory size is
-+ * one erase block; if the buf[i].size field is
-+ * swab32(erasesize) then we know we are looking at
-+ * a byte swapped FIS directory - swap all the entries!
-+ * (NOTE: this is 'size' not 'data_length'; size is
-+ * the full size of the entry.)
-+ */
-+ if (swab32(buf[i].size) == master->erasesize) {
-+ int j;
-+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+ /* The unsigned long fields were written with the
-+ * wrong byte sex, name and pad have no byte sex.
-+ */
-+ swab32s(&buf[j].flash_base);
-+ swab32s(&buf[j].mem_base);
-+ swab32s(&buf[j].size);
-+ swab32s(&buf[j].entry_point);
-+ swab32s(&buf[j].data_length);
-+ swab32s(&buf[j].desc_cksum);
-+ swab32s(&buf[j].file_cksum);
-+ }
-+ }
- break;
-+ }
- }
- if (i == numslots) {
- /* Didn't find it */
-
-
+++ /dev/null
---- linux-2.6.15/fs/Kconfig~ 2006-01-03 13:51:10.000000000 +1030
-+++ linux-2.6.15/fs/Kconfig 2006-01-05 01:35:36.000000000 +1030
-@@ -1132,6 +1132,31 @@ config JFFS2_CMODE_SIZE
-
- endchoice
-
-+choice
-+ prompt "JFFS2 endianness"
-+ default JFFS2_NATIVE_ENDIAN
-+ depends on JFFS2_FS
-+ help
-+ You can set here the default endianness of JFFS2 from
-+ the available options. Don't touch if unsure.
-+
-+config JFFS2_NATIVE_ENDIAN
-+ bool "native endian"
-+ help
-+ Uses a native endian bytestream.
-+
-+config JFFS2_BIG_ENDIAN
-+ bool "big endian"
-+ help
-+ Uses a big endian bytestream.
-+
-+config JFFS2_LITTLE_ENDIAN
-+ bool "little endian"
-+ help
-+ Uses a little endian bytestream.
-+
-+endchoice
-+
- config CRAMFS
- tristate "Compressed ROM file system support (cramfs)"
- select ZLIB_INFLATE
---- linux-2.6.15/fs/jffs2/nodelist.h~ 2006-01-05 01:37:06.000000000 +1030
-+++ linux-2.6.15/fs/jffs2/nodelist.h 2006-01-05 01:37:54.000000000 +1030
-@@ -29,12 +29,10 @@
- #include "os-linux.h"
- #endif
-
--#define JFFS2_NATIVE_ENDIAN
--
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
- whatever OS we're actually running on here too. */
-
--#if defined(JFFS2_NATIVE_ENDIAN)
-+#if defined(CONFIG_JFFS2_NATIVE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){x})
- #define cpu_to_je32(x) ((jint32_t){x})
- #define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)})
-@@ -42,7 +40,7 @@
- #define je16_to_cpu(x) ((x).v16)
- #define je32_to_cpu(x) ((x).v32)
- #define jemode_to_cpu(x) (jffs2_to_os_mode((x).m))
--#elif defined(JFFS2_BIG_ENDIAN)
-+#elif defined(CONFIG_JFFS2_BIG_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))})
-@@ -50,7 +48,7 @@
- #define je16_to_cpu(x) (be16_to_cpu(x.v16))
- #define je32_to_cpu(x) (be32_to_cpu(x.v32))
- #define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m)))
--#elif defined(JFFS2_LITTLE_ENDIAN)
-+#elif defined(CONFIG_JFFS2_LITTLE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))})
+++ /dev/null
---- linux-nslu2.orig/include/linux/rtc.h 2006-01-03 15:31:18.000000000 +0100
-+++ linux-nslu2/include/linux/rtc.h 2006-01-03 15:34:24.000000000 +0100
-@@ -91,8 +91,81 @@ struct rtc_pll_info {
- #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
- #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
-
-+/* interrupt flags */
-+#define RTC_IRQF 0x80 /* any of the following is active */
-+#define RTC_PF 0x40
-+#define RTC_AF 0x20
-+#define RTC_UF 0x10
-+
- #ifdef __KERNEL__
-
-+#include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <linux/poll.h>
-+
-+struct rtc_class_ops {
-+ int (*open)(struct device *);
-+ void (*release)(struct device *);
-+ int (*ioctl)(struct device *, unsigned int, unsigned long);
-+ int (*read_time)(struct device *, struct rtc_time *);
-+ int (*set_time)(struct device *, struct rtc_time *);
-+ int (*read_alarm)(struct device *, struct rtc_wkalrm *);
-+ int (*set_alarm)(struct device *, struct rtc_wkalrm *);
-+ int (*proc)(struct device *, struct seq_file *);
-+ int (*set_mmss)(struct device *, unsigned long secs);
-+ int (*irq_set_state)(struct device *, int enabled);
-+ int (*irq_set_freq)(struct device *, int freq);
-+};
-+
-+#define RTC_DEVICE_NAME_SIZE 20
-+struct rtc_task;
-+
-+struct rtc_device
-+{
-+ int id;
-+ struct module *owner;
-+ struct rw_semaphore lock;
-+ struct class_device class_dev;
-+ struct rtc_class_ops *ops;
-+ char name[RTC_DEVICE_NAME_SIZE];
-+
-+ struct cdev char_dev;
-+ struct semaphore char_sem;
-+
-+ unsigned long irq_data;
-+ spinlock_t irq_lock;
-+ wait_queue_head_t irq_queue;
-+ struct fasync_struct *async_queue;
-+
-+ spinlock_t irq_task_lock;
-+ struct rtc_task *irq_task;
-+ int irq_freq;
-+};
-+#define to_rtc_device(d) container_of(d, struct rtc_device, class_dev)
-+
-+extern struct rtc_device *rtc_device_register(char *name,
-+ struct device *dev,
-+ struct rtc_class_ops *ops,
-+ struct module *owner);
-+extern void rtc_device_unregister(struct rtc_device *rdev);
-+extern int rtc_interface_register(struct class_interface *intf);
-+
-+
-+extern int rtc_month_days(unsigned int month, unsigned int year);
-+extern int rtc_valid_tm(struct rtc_time *tm);
-+extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
-+extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
-+
-+extern int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_read_alarm(struct class_device *class_dev,
-+ struct rtc_wkalrm *alrm);
-+extern int rtc_set_alarm(struct class_device *class_dev,
-+ struct rtc_wkalrm *alrm);
-+extern void rtc_update_irq(struct class_device *class_dev,
-+ unsigned long num, unsigned long events);
-+
- typedef struct rtc_task {
- void (*func)(void *private_data);
- void *private_data;
---- linux-nslu2.orig/drivers/Kconfig 2006-01-03 15:31:19.000000000 +0100
-+++ linux-nslu2/drivers/Kconfig 2006-01-04 01:27:31.000000000 +0100
-@@ -66,4 +66,6 @@ source "drivers/infiniband/Kconfig"
-
- source "drivers/sn/Kconfig"
-
-+source "drivers/rtc/Kconfig"
-+
- endmenu
---- linux-nslu2.orig/drivers/Makefile 2006-01-03 15:33:32.000000000 +0100
-+++ linux-nslu2/drivers/Makefile 2006-01-04 01:27:31.000000000 +0100
-@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_GADGET) += usb/gadget/
- obj-$(CONFIG_GAMEPORT) += input/gameport/
- obj-$(CONFIG_INPUT) += input/
- obj-$(CONFIG_I2O) += message/
-+obj-y += rtc/
- obj-$(CONFIG_I2C) += i2c/
- obj-$(CONFIG_W1) += w1/
- obj-$(CONFIG_HWMON) += hwmon/
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/class.c 2006-01-03 15:45:19.000000000 +0100
-@@ -0,0 +1,141 @@
-+/*
-+ * RTC subsystem, base class
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * class skeleton from drivers/hwmon/hwmon.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/kdev_t.h>
-+#include <linux/idr.h>
-+
-+static DEFINE_IDR(rtc_idr);
-+static DECLARE_MUTEX(idr_lock);
-+struct class *rtc_class;
-+
-+static void rtc_device_release(struct class_device *class_dev)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+ down(&idr_lock);
-+ idr_remove(&rtc_idr, rtc->id);
-+ up(&idr_lock);
-+ kfree(rtc);
-+}
-+
-+/**
-+ * rtc_device_register - register w/ RTC class
-+ * @dev: the device to register
-+ *
-+ * rtc_device_unregister() must be called when the class device is no
-+ * longer needed.
-+ *
-+ * Returns the pointer to the new struct class device.
-+ */
-+struct rtc_device *rtc_device_register(char *name, struct device *dev,
-+ struct rtc_class_ops *ops,
-+ struct module *owner)
-+{
-+ struct rtc_device *rtc;
-+ int id, err;
-+
-+ if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+
-+ down(&idr_lock);
-+ err = idr_get_new(&rtc_idr, NULL, &id);
-+ up(&idr_lock);
-+
-+ if (err < 0)
-+ goto exit;
-+
-+ id = id & MAX_ID_MASK;
-+
-+ if ((rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL)) == NULL) {
-+ err = -ENOMEM;
-+ goto exit_idr;
-+ }
-+
-+ rtc->id = id;
-+ rtc->ops = ops;
-+ rtc->owner = owner;
-+ rtc->class_dev.dev = dev;
-+ rtc->class_dev.class = rtc_class;
-+ rtc->class_dev.release = rtc_device_release;
-+
-+ init_rwsem(&rtc->lock);
-+ spin_lock_init(&rtc->irq_lock);
-+ spin_lock_init(&rtc->irq_task_lock);
-+
-+ strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
-+ snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id);
-+
-+ if ((err = class_device_register(&rtc->class_dev)))
-+ goto exit_kfree;
-+
-+ dev_info(dev, "rtc core: registered %s as %s\n",
-+ rtc->name, rtc->class_dev.class_id);
-+
-+ return rtc;
-+
-+exit_kfree:
-+ kfree(rtc);
-+
-+exit_idr:
-+ idr_remove(&rtc_idr, id);
-+
-+exit:
-+ return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_register);
-+
-+
-+/**
-+ * rtc_device_unregister - removes the previously registered RTC class device
-+ *
-+ * @rtc: the RTC class device to destroy
-+ */
-+void rtc_device_unregister(struct rtc_device *rtc)
-+{
-+ down_write(&rtc->lock);
-+ class_device_unregister(&rtc->class_dev);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_unregister);
-+
-+int rtc_interface_register(struct class_interface *intf)
-+{
-+ intf->class = rtc_class;
-+ return class_interface_register(intf);
-+}
-+EXPORT_SYMBOL_GPL(rtc_interface_register);
-+
-+static int __init rtc_init(void)
-+{
-+ rtc_class = class_create(THIS_MODULE, "rtc");
-+ if (IS_ERR(rtc_class)) {
-+ printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
-+ return PTR_ERR(rtc_class);
-+ }
-+ return 0;
-+}
-+
-+static void __exit rtc_exit(void)
-+{
-+ class_destroy(rtc_class);
-+}
-+
-+module_init(rtc_init);
-+module_exit(rtc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towerteh.it>");
-+MODULE_DESCRIPTION("RTC class support");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Kconfig 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,93 @@
-+#
-+# RTC class/drivers configuration
-+#
-+
-+menu "Real Time Clock"
-+
-+config RTC_CLASS
-+ tristate "RTC class"
-+ depends on EXPERIMENTAL
-+ default y
-+ help
-+ Generic RTC class support. If you say yes here, you will
-+ be allowed to plug one or more RTCs to your system. You will
-+ probably want to enable one of more of the interfaces below.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-class.
-+
-+comment "RTC interfaces"
-+ depends on RTC_CLASS
-+
-+config RTC_INTF_SYSFS
-+ tristate "sysfs"
-+ depends on RTC_CLASS && SYSFS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the sysfs
-+ interface, /sys/class/rtc/rtcX .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-sysfs.
-+
-+config RTC_INTF_PROC
-+ tristate "proc"
-+ depends on RTC_CLASS && PROC_FS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the proc
-+ interface, /proc/driver/rtc .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-proc.
-+
-+config RTC_INTF_DEV
-+ tristate "dev"
-+ depends on RTC_CLASS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the dev
-+ interface, /dev/rtc .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-dev.
-+
-+comment "RTC drivers"
-+ depends on RTC_CLASS
-+
-+config RTC_DRV_X1205
-+ tristate "Xicor/Intersil X1205 RTC chip"
-+ depends on RTC_CLASS && I2C
-+ help
-+ If you say yes here you get support for the
-+ Xicor/Intersil X1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-x1205.
-+
-+config RTC_DRV_DS1672
-+ tristate "Dallas/Maxim DS1672"
-+ depends on RTC_CLASS && I2C
-+ help
-+ If you say yes here you get support for the
-+ Dallas/Maxim DS1672 timekeeping chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-ds1672.
-+
-+config RTC_DRV_TEST
-+ tristate "Test driver/device"
-+ depends on RTC_CLASS
-+ help
-+ If you say yes here you get support for the
-+ RTC test driver. It's a software RTC which can be
-+ used to test the RTC subsystem APIs. It gets
-+ the time from the system clock.
-+ You want this driver only if you are doing development
-+ on the RTC subsystem. Please read the source code
-+ for further details.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-test.
-+
-+endmenu
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Makefile 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for RTC class/drivers.
-+#
-+
-+obj-y += utils.o
-+obj-$(CONFIG_RTC_CLASS) += rtc-core.o
-+rtc-core-y := class.o interface.o
-+obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
-+obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
-+obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
-+
-+obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
-+obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-+obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
-+
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/interface.c 2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * RTC subsystem, interface functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+extern struct class *rtc_class;
-+
-+int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+ int err = -EINVAL;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ if (ops->read_time) {
-+ memset(tm, 0, sizeof(struct rtc_time));
-+ err = ops->read_time(class_dev->dev, tm);
-+ }
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_read_time);
-+
-+int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+ int err;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ err = rtc_valid_tm(tm);
-+ if (err == 0 && ops->set_time)
-+ err = ops->set_time(class_dev->dev, tm);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_set_time);
-+
-+int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+ int err = -EINVAL;
-+
-+ if (ops->read_alarm) {
-+ memset(alarm, 0, sizeof(struct rtc_wkalrm));
-+ err = ops->read_alarm(class_dev->dev, alarm);
-+ }
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_read_alarm);
-+
-+int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+ int err = -EINVAL;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ if (ops->set_alarm)
-+ err = ops->set_alarm(class_dev->dev, alarm);
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_set_alarm);
-+
-+void rtc_update_irq(struct class_device *class_dev,
-+ unsigned long num, unsigned long events)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock(&rtc->irq_lock);
-+ rtc->irq_data = (rtc->irq_data + (num << 8)) | events;
-+ spin_unlock(&rtc->irq_lock);
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task)
-+ rtc->irq_task->func(rtc->irq_task->private_data);
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ wake_up_interruptible(&rtc->irq_queue);
-+ kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
-+}
-+EXPORT_SYMBOL(rtc_update_irq);
-+
-+struct class_device *rtc_open(char *name)
-+{
-+ struct class_device *class_dev = NULL,
-+ *class_dev_tmp;
-+
-+ down(&rtc_class->sem);
-+ list_for_each_entry(class_dev_tmp, &rtc_class->children, node) {
-+ if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) {
-+ class_dev = class_dev_tmp;
-+ break;
-+ }
-+ }
-+ up(&rtc_class->sem);
-+
-+ return class_dev;
-+}
-+EXPORT_SYMBOL(rtc_open);
-+
-+void rtc_close(struct class_device *class_dev)
-+{
-+}
-+EXPORT_SYMBOL(rtc_close);
-+
-+int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task)
-+{
-+ int retval = -EBUSY;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ if (task == NULL || task->func == NULL)
-+ return -EINVAL;
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task == NULL) {
-+ rtc->irq_task = task;
-+ retval = 0;
-+ }
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ return retval;
-+}
-+EXPORT_SYMBOL(rtc_irq_register);
-+
-+void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task == task)
-+ rtc->irq_task = NULL;
-+ spin_unlock(&rtc->irq_task_lock);
-+}
-+EXPORT_SYMBOL(rtc_irq_unregister);
-+
-+int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled)
-+{
-+ int err = 0;
-+ unsigned long flags;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+ if (rtc->irq_task != task)
-+ err = -ENXIO;
-+ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+ if (err == 0)
-+ err = rtc->ops->irq_set_state(class_dev->dev, enabled);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_irq_set_state);
-+
-+int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq)
-+{
-+ int err = 0, tmp = 0;
-+ unsigned long flags;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ /* allowed range is 2-8192 */
-+ if (freq < 2 || freq > 8192)
-+ return -EINVAL;
-+
-+/* if ((freq > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE)))
-+ return -EACCES;
-+*/
-+ /* check if freq is a power of 2 */
-+ while (freq > (1 << tmp))
-+ tmp++;
-+
-+ if (freq != (1 << tmp))
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+ if (rtc->irq_task != task)
-+ err = -ENXIO;
-+ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+ if (err == 0) {
-+ if ((err = rtc->ops->irq_set_freq(class_dev->dev, freq)) == 0)
-+ rtc->irq_freq = freq;
-+ }
-+ return err;
-+
-+}
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/utils.c 2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,97 @@
-+/*
-+ * RTC subsystem, utility functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+static const unsigned char rtc_days_in_month[] = {
-+ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-+};
-+
-+#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
-+#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
-+
-+int rtc_month_days(unsigned int month, unsigned int year)
-+{
-+ return rtc_days_in_month[month] + (LEAP_YEAR(year) && month == 1);
-+}
-+EXPORT_SYMBOL(rtc_month_days);
-+
-+/*
-+ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-+ */
-+void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-+{
-+ int days, month, year;
-+
-+ days = time / 86400;
-+ time -= days * 86400;
-+
-+ tm->tm_wday = (days + 4) % 7;
-+
-+ year = 1970 + days / 365;
-+ days -= (year - 1970) * 365
-+ + LEAPS_THRU_END_OF(year - 1)
-+ - LEAPS_THRU_END_OF(1970 - 1);
-+ if (days < 0) {
-+ year -= 1;
-+ days += 365 + LEAP_YEAR(year);
-+ }
-+ tm->tm_year = year - 1900;
-+ tm->tm_yday = days + 1;
-+
-+ for (month = 0; month < 11; month++) {
-+ int newdays;
-+
-+ newdays = days - rtc_month_days(month, year);
-+ if (newdays < 0)
-+ break;
-+ days = newdays;
-+ }
-+ tm->tm_mon = month;
-+ tm->tm_mday = days + 1;
-+
-+ tm->tm_hour = time / 3600;
-+ time -= tm->tm_hour * 3600;
-+ tm->tm_min = time / 60;
-+ tm->tm_sec = time - tm->tm_min * 60;
-+}
-+EXPORT_SYMBOL(rtc_time_to_tm);
-+
-+/*
-+ * Does the rtc_time represent a valid date/time?
-+ */
-+int rtc_valid_tm(struct rtc_time *tm)
-+{
-+ if (tm->tm_year < 70 ||
-+ tm->tm_mon >= 12 ||
-+ tm->tm_mday < 1 ||
-+ tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900) ||
-+ tm->tm_hour >= 24 ||
-+ tm->tm_min >= 60 ||
-+ tm->tm_sec >= 60)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(rtc_valid_tm);
-+
-+/*
-+ * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-+ */
-+int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-+{
-+ *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+ return 0;
-+}
-+EXPORT_SYMBOL(rtc_tm_to_time);
---- linux-nslu2.orig/arch/arm/Kconfig 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/Kconfig 2006-01-04 01:27:31.000000000 +0100
-@@ -750,6 +750,8 @@ source "drivers/usb/Kconfig"
-
- source "drivers/mmc/Kconfig"
-
-+source "drivers/rtc/Kconfig"
-+
- endmenu
-
- source "fs/Kconfig"
---- linux-nslu2.orig/arch/arm/common/rtctime.c 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/common/rtctime.c 2006-01-04 01:27:09.000000000 +0100
-@@ -40,89 +40,6 @@ static struct rtc_ops *rtc_ops;
-
- #define rtc_epoch 1900UL
-
--static const unsigned char days_in_month[] = {
-- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
--};
--
--#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
--#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
--
--static int month_days(unsigned int month, unsigned int year)
--{
-- return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
--}
--
--/*
-- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-- */
--void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
--{
-- int days, month, year;
--
-- days = time / 86400;
-- time -= days * 86400;
--
-- tm->tm_wday = (days + 4) % 7;
--
-- year = 1970 + days / 365;
-- days -= (year - 1970) * 365
-- + LEAPS_THRU_END_OF(year - 1)
-- - LEAPS_THRU_END_OF(1970 - 1);
-- if (days < 0) {
-- year -= 1;
-- days += 365 + LEAP_YEAR(year);
-- }
-- tm->tm_year = year - 1900;
-- tm->tm_yday = days + 1;
--
-- for (month = 0; month < 11; month++) {
-- int newdays;
--
-- newdays = days - month_days(month, year);
-- if (newdays < 0)
-- break;
-- days = newdays;
-- }
-- tm->tm_mon = month;
-- tm->tm_mday = days + 1;
--
-- tm->tm_hour = time / 3600;
-- time -= tm->tm_hour * 3600;
-- tm->tm_min = time / 60;
-- tm->tm_sec = time - tm->tm_min * 60;
--}
--EXPORT_SYMBOL(rtc_time_to_tm);
--
--/*
-- * Does the rtc_time represent a valid date/time?
-- */
--int rtc_valid_tm(struct rtc_time *tm)
--{
-- if (tm->tm_year < 70 ||
-- tm->tm_mon >= 12 ||
-- tm->tm_mday < 1 ||
-- tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
-- tm->tm_hour >= 24 ||
-- tm->tm_min >= 60 ||
-- tm->tm_sec >= 60)
-- return -EINVAL;
--
-- return 0;
--}
--EXPORT_SYMBOL(rtc_valid_tm);
--
--/*
-- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-- */
--int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
--{
-- *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-- tm->tm_hour, tm->tm_min, tm->tm_sec);
--
-- return 0;
--}
--EXPORT_SYMBOL(rtc_tm_to_time);
--
- /*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
-@@ -141,13 +58,13 @@ void rtc_next_alarm_time(struct rtc_time
- next->tm_sec = alrm->tm_sec;
- }
-
--static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- memset(tm, 0, sizeof(struct rtc_time));
- return ops->read_time(tm);
- }
-
--static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- int ret;
-
-@@ -158,7 +75,7 @@ static inline int rtc_set_time(struct rt
- return ret;
- }
-
--static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- int ret = -EINVAL;
- if (ops->read_alarm) {
-@@ -168,7 +85,7 @@ static inline int rtc_read_alarm(struct
- return ret;
- }
-
--static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- int ret = -EINVAL;
- if (ops->set_alarm)
-@@ -256,7 +173,7 @@ static int rtc_ioctl(struct inode *inode
-
- switch (cmd) {
- case RTC_ALM_READ:
-- ret = rtc_read_alarm(ops, &alrm);
-+ ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-@@ -278,11 +195,11 @@ static int rtc_ioctl(struct inode *inode
- alrm.time.tm_wday = -1;
- alrm.time.tm_yday = -1;
- alrm.time.tm_isdst = -1;
-- ret = rtc_set_alarm(ops, &alrm);
-+ ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_RD_TIME:
-- ret = rtc_read_time(ops, &tm);
-+ ret = rtc_arm_read_time(ops, &tm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &tm, sizeof(tm));
-@@ -300,7 +217,7 @@ static int rtc_ioctl(struct inode *inode
- ret = -EFAULT;
- break;
- }
-- ret = rtc_set_time(ops, &tm);
-+ ret = rtc_arm_set_time(ops, &tm);
- break;
-
- case RTC_EPOCH_SET:
-@@ -331,11 +248,11 @@ static int rtc_ioctl(struct inode *inode
- ret = -EFAULT;
- break;
- }
-- ret = rtc_set_alarm(ops, &alrm);
-+ ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_WKALM_RD:
-- ret = rtc_read_alarm(ops, &alrm);
-+ ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-@@ -425,7 +342,7 @@ static int rtc_read_proc(char *page, cha
- struct rtc_time tm;
- char *p = page;
-
-- if (rtc_read_time(ops, &tm) == 0) {
-+ if (rtc_arm_read_time(ops, &tm) == 0) {
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
-@@ -435,7 +352,7 @@ static int rtc_read_proc(char *page, cha
- rtc_epoch);
- }
-
-- if (rtc_read_alarm(ops, &alrm) == 0) {
-+ if (rtc_arm_read_alarm(ops, &alrm) == 0) {
- p += sprintf(p, "alrm_time\t: ");
- if ((unsigned int)alrm.time.tm_hour <= 24)
- p += sprintf(p, "%02d:", alrm.time.tm_hour);
---- linux-nslu2.orig/include/asm-arm/rtc.h 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/include/asm-arm/rtc.h 2006-01-04 01:27:09.000000000 +0100
-@@ -25,9 +25,6 @@ struct rtc_ops {
- int (*proc)(char *buf);
- };
-
--void rtc_time_to_tm(unsigned long, struct rtc_time *);
--int rtc_tm_to_time(struct rtc_time *, unsigned long *);
--int rtc_valid_tm(struct rtc_time *);
- void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
- void rtc_update(unsigned long, unsigned long);
- int register_rtc(struct rtc_ops *);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-sysfs.c 2006-01-04 01:27:12.000000000 +0100
-@@ -0,0 +1,125 @@
-+/*
-+ * RTC subsystem, sysfs interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+/* device attributes */
-+
-+static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf)
-+{
-+ return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
-+}
-+static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL);
-+
-+static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ retval = sprintf(buf, "%04d-%02d-%02d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL);
-+
-+static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ retval = sprintf(buf, "%02d:%02d:%02d\n",
-+ tm.tm_hour, tm.tm_min, tm.tm_sec);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL);
-+
-+static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ unsigned long time;
-+ rtc_tm_to_time(&tm, &time);
-+ retval = sprintf(buf, "%lu\n", time);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int __devinit rtc_sysfs_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ class_device_create_file(class_dev, &class_device_attr_name);
-+ class_device_create_file(class_dev, &class_device_attr_date);
-+ class_device_create_file(class_dev, &class_device_attr_time);
-+ class_device_create_file(class_dev, &class_device_attr_since_epoch);
-+ dev_info(class_dev->dev, "rtc intf: sysfs\n");
-+ return 0;
-+}
-+
-+static void rtc_sysfs_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ class_device_remove_file(class_dev, &class_device_attr_name);
-+ class_device_remove_file(class_dev, &class_device_attr_date);
-+ class_device_remove_file(class_dev, &class_device_attr_time);
-+ class_device_remove_file(class_dev, &class_device_attr_since_epoch);
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_sysfs_interface = {
-+ .add = &rtc_sysfs_add_device,
-+ .remove = &rtc_sysfs_remove_device,
-+};
-+
-+static int __init rtc_sysfs_init(void)
-+{
-+ return rtc_interface_register(&rtc_sysfs_interface);
-+}
-+
-+static void __exit rtc_sysfs_exit(void)
-+{
-+ class_interface_unregister(&rtc_sysfs_interface);
-+}
-+
-+module_init(rtc_sysfs_init);
-+module_exit(rtc_sysfs_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class sysfs interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-proc.c 2006-01-04 01:27:14.000000000 +0100
-@@ -0,0 +1,158 @@
-+/*
-+ * RTC subsystem, proc interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/proc_fs.h>
-+#include <linux/seq_file.h>
-+
-+static struct class_device *rtc_dev = NULL;
-+static DECLARE_MUTEX(rtc_sem);
-+
-+static int rtc_proc_show(struct seq_file *seq, void *offset)
-+{
-+ struct class_device *class_dev = seq->private;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+ struct rtc_wkalrm alrm;
-+ struct rtc_time tm;
-+
-+ if (rtc_read_time(class_dev, &tm) == 0) {
-+ seq_printf(seq,
-+ "rtc_time\t: %02d:%02d:%02d\n"
-+ "rtc_date\t: %04d-%02d-%02d\n",
-+ tm.tm_hour, tm.tm_min, tm.tm_sec,
-+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+ }
-+
-+ if (rtc_read_alarm(class_dev, &alrm) == 0) {
-+ seq_printf(seq, "alrm_time\t: ");
-+ if ((unsigned int)alrm.time.tm_hour <= 24)
-+ seq_printf(seq, "%02d:", alrm.time.tm_hour);
-+ else
-+ seq_printf(seq, "**:");
-+ if ((unsigned int)alrm.time.tm_min <= 59)
-+ seq_printf(seq, "%02d:", alrm.time.tm_min);
-+ else
-+ seq_printf(seq, "**:");
-+ if ((unsigned int)alrm.time.tm_sec <= 59)
-+ seq_printf(seq, "%02d\n", alrm.time.tm_sec);
-+ else
-+ seq_printf(seq, "**\n");
-+
-+ seq_printf(seq, "alrm_date\t: ");
-+ if ((unsigned int)alrm.time.tm_year <= 200)
-+ seq_printf(seq, "%04d-", alrm.time.tm_year + 1900);
-+ else
-+ seq_printf(seq, "****-");
-+ if ((unsigned int)alrm.time.tm_mon <= 11)
-+ seq_printf(seq, "%02d-", alrm.time.tm_mon + 1);
-+ else
-+ seq_printf(seq, "**-");
-+ if ((unsigned int)alrm.time.tm_mday <= 31)
-+ seq_printf(seq, "%02d\n", alrm.time.tm_mday);
-+ else
-+ seq_printf(seq, "**\n");
-+ seq_printf(seq, "alrm_wakeup\t: %s\n",
-+ alrm.enabled ? "yes" : "no");
-+ seq_printf(seq, "alrm_pending\t: %s\n",
-+ alrm.pending ? "yes" : "no");
-+ }
-+
-+ if (ops->proc)
-+ ops->proc(class_dev->dev, seq);
-+
-+ return 0;
-+}
-+
-+static int rtc_proc_open(struct inode *inode, struct file *file)
-+{
-+ struct class_device *class_dev = PDE(inode)->data;
-+
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
-+
-+ return single_open(file, rtc_proc_show, class_dev);
-+}
-+
-+static int rtc_proc_release(struct inode *inode, struct file *file)
-+{
-+ int res = single_release(inode, file);
-+ module_put(THIS_MODULE);
-+ return res;
-+}
-+
-+static struct file_operations rtc_proc_fops = {
-+ .open = rtc_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = rtc_proc_release,
-+};
-+
-+static int rtc_proc_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ down(&rtc_sem);
-+ if (rtc_dev == NULL) {
-+ struct proc_dir_entry *ent;
-+
-+ rtc_dev = class_dev;
-+
-+ if ((ent = create_proc_entry("driver/rtc", 0, NULL))) {
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ ent->proc_fops = &rtc_proc_fops;
-+ ent->owner = rtc->owner;
-+ ent->data = class_dev;
-+
-+ dev_info(class_dev->dev, "rtc intf: proc\n");
-+ }
-+ else
-+ rtc_dev = NULL;
-+ }
-+ up(&rtc_sem);
-+
-+ return 0;
-+}
-+
-+static void rtc_proc_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ down(&rtc_sem);
-+ if (rtc_dev == class_dev) {
-+ remove_proc_entry("driver/rtc", NULL);
-+ rtc_dev = NULL;
-+ }
-+ up(&rtc_sem);
-+}
-+
-+struct class_interface rtc_proc_interface = {
-+ .add = &rtc_proc_add_device,
-+ .remove = &rtc_proc_remove_device,
-+};
-+
-+static int __init rtc_proc_init(void)
-+{
-+ return rtc_interface_register(&rtc_proc_interface);
-+}
-+
-+static void __exit rtc_proc_exit(void)
-+{
-+ class_interface_unregister(&rtc_proc_interface);
-+}
-+
-+module_init(rtc_proc_init);
-+module_exit(rtc_proc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class proc interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-dev.c 2006-01-04 01:27:15.000000000 +0100
-@@ -0,0 +1,372 @@
-+/*
-+ * RTC subsystem, dev interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+static dev_t rtc_devt;
-+
-+#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */
-+
-+static int rtc_dev_open(struct inode *inode, struct file *file)
-+{
-+ int err;
-+ struct rtc_device *rtc = container_of(inode->i_cdev,
-+ struct rtc_device, char_dev);
-+ struct rtc_class_ops *ops = rtc->ops;
-+
-+ /* We keep the lock as long as the device is in use
-+ * and return immediately if busy
-+ */
-+ if (down_trylock(&rtc->char_sem))
-+ return -EBUSY;
-+
-+ file->private_data = &rtc->class_dev;
-+
-+ err = ops->open ? ops->open(rtc->class_dev.dev) : 0;
-+ if (err == 0) {
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ return 0;
-+ }
-+
-+ /* something has gone wrong, release the lock */
-+ up(&rtc->char_sem);
-+ return err;
-+}
-+
-+
-+static ssize_t
-+rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned long data;
-+ ssize_t ret;
-+
-+ if (count < sizeof(unsigned long))
-+ return -EINVAL;
-+
-+ add_wait_queue(&rtc->irq_queue, &wait);
-+ do {
-+ __set_current_state(TASK_INTERRUPTIBLE);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ data = rtc->irq_data;
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ if (data != 0) {
-+ ret = 0;
-+ break;
-+ }
-+ if (file->f_flags & O_NONBLOCK) {
-+ ret = -EAGAIN;
-+ break;
-+ }
-+ if (signal_pending(current)) {
-+ ret = -ERESTARTSYS;
-+ break;
-+ }
-+ schedule();
-+ } while (1);
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&rtc->irq_queue, &wait);
-+
-+ if (ret == 0) {
-+ ret = put_user(data, (unsigned long __user *)buf);
-+ if (ret == 0)
-+ ret = sizeof(unsigned long);
-+ }
-+ return ret;
-+}
-+
-+static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+ unsigned long data;
-+
-+ poll_wait(file, &rtc->irq_queue, wait);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ data = rtc->irq_data;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ return data != 0 ? POLLIN | POLLRDNORM : 0;
-+}
-+
-+static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int err = 0;
-+ struct class_device *class_dev = file->private_data;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+ struct rtc_class_ops *ops = rtc->ops;
-+ struct rtc_time tm;
-+ struct rtc_wkalrm alarm;
-+ void __user *uarg = (void __user *) arg;
-+
-+ /* avoid conflicting IRQ users */
-+ if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) {
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task)
-+ err = -EBUSY;
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ if (err < 0)
-+ return err;
-+ }
-+
-+ /* try the driver's ioctl interface */
-+ if (ops->ioctl) {
-+ err = ops->ioctl(class_dev->dev, cmd, arg);
-+ if (err < 0 && err != -EINVAL)
-+ return err;
-+ }
-+
-+ /* if the driver does not provide the ioctl interface
-+ * or if that particular ioctl was not implemented
-+ * (-EINVAL), we will try to emulate here.
-+ */
-+
-+ switch (cmd) {
-+ case RTC_ALM_READ:
-+ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &alarm.time, sizeof(tm))))
-+ return -EFAULT;
-+ break;
-+
-+ case RTC_ALM_SET:
-+ if ((err = copy_from_user(&alarm.time, uarg, sizeof(tm))))
-+ return -EFAULT;
-+
-+ alarm.enabled = 0;
-+ alarm.pending = 0;
-+ alarm.time.tm_mday = -1;
-+ alarm.time.tm_mon = -1;
-+ alarm.time.tm_year = -1;
-+ alarm.time.tm_wday = -1;
-+ alarm.time.tm_yday = -1;
-+ alarm.time.tm_isdst = -1;
-+ err = rtc_set_alarm(class_dev, &alarm);
-+ break;
-+
-+ case RTC_RD_TIME:
-+ if ((err = rtc_read_time(class_dev, &tm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &tm, sizeof(tm))))
-+ return -EFAULT;
-+ break;
-+
-+ case RTC_SET_TIME:
-+ if (!capable(CAP_SYS_TIME))
-+ return -EACCES;
-+
-+ if ((err = copy_from_user(&tm, uarg, sizeof(tm))))
-+ return -EFAULT;
-+
-+ err = rtc_set_time(class_dev, &tm);
-+ break;
-+#if 0
-+ case RTC_EPOCH_SET:
-+#ifndef rtc_epoch
-+ /*
-+ * There were no RTC clocks before 1900.
-+ */
-+ if (arg < 1900) {
-+ err = -EINVAL;
-+ break;
-+ }
-+ if (!capable(CAP_SYS_TIME)) {
-+ err = -EACCES;
-+ break;
-+ }
-+ rtc_epoch = arg;
-+ err = 0;
-+#endif
-+ break;
-+
-+ case RTC_EPOCH_READ:
-+ err = put_user(rtc_epoch, (unsigned long __user *)uarg);
-+ break;
-+#endif
-+ case RTC_WKALM_SET:
-+ if ((err = copy_from_user(&alarm, uarg, sizeof(alarm))))
-+ return -EFAULT;
-+
-+ err = rtc_set_alarm(class_dev, &alarm);
-+ break;
-+
-+ case RTC_WKALM_RD:
-+ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &alarm, sizeof(alarm))))
-+ return -EFAULT;
-+ break;
-+
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ return err;
-+}
-+
-+static int rtc_dev_release(struct inode *inode, struct file *file)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+ if (rtc->ops->release)
-+ rtc->ops->release(rtc->class_dev.dev);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ up(&rtc->char_sem);
-+ return 0;
-+}
-+
-+static int rtc_dev_fasync(int fd, struct file *file, int on)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+ return fasync_helper(fd, file, on, &rtc->async_queue);
-+}
-+
-+static struct file_operations rtc_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = rtc_dev_read,
-+ .poll = rtc_dev_poll,
-+ .ioctl = rtc_dev_ioctl,
-+ .open = rtc_dev_open,
-+ .release = rtc_dev_release,
-+ .fasync = rtc_dev_fasync,
-+};
-+
-+static ssize_t rtc_dev_show_dev(struct class_device *class_dev, char *buf)
-+{
-+ return print_dev_t(buf, class_dev->devt);
-+}
-+static CLASS_DEVICE_ATTR(dev, S_IRUGO, rtc_dev_show_dev, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int rtc_dev_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ if (rtc->id >= RTC_DEV_MAX) {
-+ dev_err(class_dev->dev, "too many RTCs\n");
-+ return -EINVAL;
-+ }
-+
-+ init_MUTEX(&rtc->char_sem);
-+ spin_lock_init(&rtc->irq_lock);
-+ init_waitqueue_head(&rtc->irq_queue);
-+
-+ cdev_init(&rtc->char_dev, &rtc_dev_fops);
-+ rtc->char_dev.owner = rtc->owner;
-+ class_dev->devt = MKDEV(MAJOR(rtc_devt), rtc->id);
-+
-+ if (cdev_add(&rtc->char_dev, class_dev->devt, 1)) {
-+ cdev_del(&rtc->char_dev);
-+
-+ dev_err(class_dev->dev,
-+ "failed to add char device %d:%d\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+
-+ class_dev->devt = MKDEV(0, 0);
-+ return -ENODEV;
-+ }
-+
-+ class_device_create_file(class_dev, &class_device_attr_dev);
-+
-+ dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+
-+ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
-+
-+ return 0;
-+}
-+
-+static void rtc_dev_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ class_device_remove_file(class_dev, &class_device_attr_dev);
-+
-+ if (MAJOR(class_dev->devt)) {
-+ dev_dbg(class_dev->dev, "removing char %d:%d\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+ cdev_del(&rtc->char_dev);
-+
-+ kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
-+
-+ class_dev->devt = MKDEV(0, 0);
-+ }
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_dev_interface = {
-+ .add = &rtc_dev_add_device,
-+ .remove = &rtc_dev_remove_device,
-+};
-+
-+static int __init rtc_dev_init(void)
-+{
-+ int err;
-+
-+ if ((err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc")) < 0) {
-+ printk(KERN_ERR "%s: failed to allocate char dev region\n",
-+ __FILE__);
-+ return err;
-+ }
-+
-+ if ((err = rtc_interface_register(&rtc_dev_interface)) < 0) {
-+ printk(KERN_ERR "%s: failed to register the interface\n",
-+ __FILE__);
-+ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit rtc_dev_exit(void)
-+{
-+ class_interface_unregister(&rtc_dev_interface);
-+
-+ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+}
-+
-+module_init(rtc_dev_init);
-+module_exit(rtc_dev_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class dev interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-x1205.c 2006-01-04 01:27:17.000000000 +0100
-@@ -0,0 +1,725 @@
-+/*
-+ * An i2c driver for the Xicor/Intersil X1205 RTC
-+ * Copyright 2004 Karen Spearel
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * please send all reports to:
-+ * kas11 at tampabay dot rr dot com
-+ * a dot zummo at towertech dot it
-+ *
-+ * based on a lot of other RTC drivers.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/delay.h>
-+
-+#define DRV_VERSION "1.0.5"
-+
-+/* Addresses to scan: none. This chip is located at
-+ * 0x6f and uses a two bytes register addressing.
-+ * Two bytes need to be written to read a single register,
-+ * while most other chips just require one and take the second
-+ * one as the data to be written. To prevent corrupting
-+ * unknown chips, the user must explicitely set the probe parameter.
-+ */
-+
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* offsets into CCR area */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01 /* Clock failure */
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable */
-+
-+#define X1205_DTR_DTR0 0x01
-+#define X1205_DTR_DTR1 0x02
-+#define X1205_DTR_DTR2 0x04
-+
-+#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-+
-+/* Prototypes */
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+static struct i2c_driver x1205_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "x1205",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &x1205_attach,
-+ .detach_client = &x1205_detach,
-+};
-+
-+/*
-+ * In the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ unsigned char reg_base)
-+{
-+ unsigned char dt_addr[2] = { 0, reg_base };
-+
-+ unsigned char buf[8];
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 8, buf }, /* read date */
-+ };
-+
-+ /* read date registers */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR])
-+ + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ return 0;
-+}
-+
-+static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
-+{
-+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, sr }, /* read status */
-+ };
-+
-+ /* read status register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base)
-+{
-+ int i, xfer;
-+ unsigned char buf[8];
-+
-+ static const unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-+
-+ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-+
-+ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour);
-+
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* set hour and 24hr bit */
-+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+ /* should we also set the date? */
-+ if (datetoo) {
-+ dev_dbg(&client->dev,
-+ "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+
-+ /* month, 1 - 12 */
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
-+
-+ /* year, since the rtc epoch*/
-+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
-+ buf[CCR_WDAY] = tm->tm_wday & 0x07;
-+ buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
-+ }
-+
-+ /* this sequence is required to unlock the chip */
-+ xfer = i2c_master_send(client, wel, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ xfer = i2c_master_send(client, rwel, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ /* write register's data */
-+ for (i = 0; i < (datetoo ? 8 : 3); i++) {
-+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
-+
-+ xfer = i2c_master_send(client, rdata, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev,
-+ "%s: xfer=%d addr=%02x, data=%02x\n",
-+ __FUNCTION__,
-+ xfer, rdata[1], rdata[2]);
-+ return -EIO;
-+ }
-+ };
-+
-+ /* disable further writes */
-+ xfer = i2c_master_send(client, diswe, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_fix_osc(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+
-+ tm.tm_hour = 0;
-+ tm.tm_min = 0;
-+ tm.tm_sec = 0;
-+
-+ if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
-+ dev_err(&client->dev,
-+ "unable to restart the clock\n");
-+
-+ return err;
-+}
-+
-+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
-+{
-+ unsigned char dtr;
-+ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
-+ };
-+
-+ /* read dtr register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
-+
-+ *trim = 0;
-+
-+ if (dtr & X1205_DTR_DTR0)
-+ *trim += 20;
-+
-+ if (dtr & X1205_DTR_DTR1)
-+ *trim += 10;
-+
-+ if (dtr & X1205_DTR_DTR2)
-+ *trim = -*trim;
-+
-+ return 0;
-+}
-+
-+static int x1205_get_atrim(struct i2c_client *client, int *trim)
-+{
-+ s8 atr;
-+ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
-+ };
-+
-+ /* read atr register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
-+
-+ /* atr is a two's complement value on 6 bits,
-+ * perform sign extension. The formula is
-+ * Catr = (atr * 0.25pF) + 11.00pF.
-+ */
-+ if (atr & 0x20)
-+ atr |= 0xC0;
-+
-+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
-+
-+ *trim = (atr * 250) + 11000;
-+
-+ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+
-+ return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+
-+ struct rtc_time tm;
-+ struct timespec tv;
-+ unsigned char sr;
-+
-+ if ((err = x1205_get_status(client, &sr)) < 0)
-+ return err;
-+
-+ /* Don't set if we had a power failure */
-+ if (sr & X1205_SR_RTCF)
-+ return -EINVAL;
-+
-+ if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0)
-+ return err;
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+struct x1205_limit
-+{
-+ unsigned char reg;
-+ unsigned char mask;
-+ unsigned char min;
-+ unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+ int i, xfer;
-+
-+ /* Probe array. We will read the register at the specified
-+ * address and check if the given bits are zero.
-+ */
-+ static const unsigned char probe_zero_pattern[] = {
-+ /* register, mask */
-+ X1205_REG_SR, 0x18,
-+ X1205_REG_DTR, 0xF8,
-+ X1205_REG_ATR, 0xC0,
-+ X1205_REG_INT, 0x18,
-+ X1205_REG_0, 0xFF,
-+ };
-+
-+ static const struct x1205_limit probe_limits_pattern[] = {
-+ /* register, mask, min, max */
-+ { X1205_REG_Y2K, 0xFF, 19, 20 },
-+ { X1205_REG_DW, 0xFF, 0, 6 },
-+ { X1205_REG_YR, 0xFF, 0, 99 },
-+ { X1205_REG_MO, 0xFF, 0, 12 },
-+ { X1205_REG_DT, 0xFF, 0, 31 },
-+ { X1205_REG_HR, 0x7F, 0, 23 },
-+ { X1205_REG_MN, 0xFF, 0, 59 },
-+ { X1205_REG_SC, 0xFF, 0, 59 },
-+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ };
-+
-+ /* check that registers have bits a 0 where expected */
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+ unsigned char buf;
-+
-+ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr },
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ if ((buf & probe_zero_pattern[i+1]) != 0) {
-+ dev_err(&client->adapter->dev,
-+ "%s: register=%02x, zero pattern=%d, value=%x\n",
-+ __FUNCTION__, addr[1], i, buf);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ /* check limits (only registers with bcd values) */
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-+ unsigned char reg, value;
-+
-+ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr },
-+ { client->addr, I2C_M_RD, 1, ® },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+
-+ if (value > probe_limits_pattern[i].max ||
-+ value < probe_limits_pattern[i].min) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register=%x, lim pattern=%d, value=%d\n",
-+ __FUNCTION__, addr[1], i, value);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_rtc_read_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return x1205_get_datetime(to_i2c_client(dev),
-+ &alrm->time, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_set_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return x1205_set_datetime(to_i2c_client(dev),
-+ &alrm->time, 1, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_read_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return x1205_get_datetime(to_i2c_client(dev),
-+ tm, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return x1205_set_datetime(to_i2c_client(dev),
-+ tm, 1, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ int err;
-+
-+ struct rtc_time new_tm, old_tm;
-+
-+ if ((err = x1205_rtc_read_time(dev, &old_tm) == 0))
-+ return err;
-+
-+ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+ new_tm.tm_sec = secs % 60;
-+ secs /= 60;
-+ new_tm.tm_min = secs % 60;
-+ secs /= 60;
-+ new_tm.tm_hour = secs % 24;
-+
-+ /*
-+ * avoid writing when we're going to change the day
-+ * of the month. We will retry in the next minute.
-+ * This basically means that if the RTC must not drift
-+ * by more than 1 minute in 11 minutes.
-+ */
-+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+ return 1;
-+
-+ return x1205_rtc_set_time(dev, &new_tm);
-+}
-+
-+static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ int err, dtrim, atrim;
-+
-+ seq_printf(seq, "24hr\t\t: yes\n");
-+
-+ err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
-+ if (err == 0)
-+ seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
-+
-+ err = x1205_get_atrim(to_i2c_client(dev), &atrim);
-+ if (err == 0)
-+ seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
-+ atrim / 1000, atrim % 1000);
-+ return 0;
-+}
-+
-+static struct rtc_class_ops x1205_rtc_ops = {
-+ .proc = x1205_rtc_proc,
-+ .read_time = x1205_rtc_read_time,
-+ .set_time = x1205_rtc_set_time,
-+ .read_alarm = x1205_rtc_read_alarm,
-+ .set_alarm = x1205_rtc_set_alarm,
-+ .set_mmss = x1205_rtc_set_mmss,
-+};
-+
-+static ssize_t x1205_sysfs_show_atrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int atrim;
-+
-+ if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) {
-+ return sprintf(buf, "%d.%02d pF\n",
-+ atrim / 1000, atrim % 1000); }
-+ return 0;
-+}
-+static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
-+
-+static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int dtrim;
-+
-+ if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) {
-+ return sprintf(buf, "%d ppm\n", dtrim);
-+ }
-+ return 0;
-+}
-+static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-+
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int err = 0;
-+ unsigned char sr;
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* I2C client */
-+ client->addr = address;
-+ client->driver = &x1205_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, x1205_driver.name, I2C_NAME_SIZE);
-+
-+ /* Verify the chip is really an X1205 */
-+ if (kind < 0) {
-+ if (x1205_validate_client(client) < 0) {
-+ err = -ENODEV;
-+ goto exit_kfree;
-+ }
-+ }
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ rtc = rtc_device_register(x1205_driver.name, &client->dev,
-+ &x1205_rtc_ops, THIS_MODULE);
-+
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&client->dev,
-+ "unable to register the class device\n");
-+ goto exit_detach;
-+ }
-+
-+ i2c_set_clientdata(client, rtc);
-+
-+ /* Check for power failures and eventualy enable the osc */
-+ if ((err = x1205_get_status(client, &sr)) == 0) {
-+ if (sr & X1205_SR_RTCF) {
-+ dev_err(&client->dev,
-+ "power failure detected, "
-+ "please set the clock\n");
-+ udelay(50);
-+ x1205_fix_osc(client);
-+ }
-+ }
-+ else
-+ dev_err(&client->dev, "couldn't read status\n");
-+
-+ /* If requested, set the system time */
-+ if (hctosys) {
-+ if ((err = x1205_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-+
-+ device_create_file(&client->dev, &dev_attr_atrim);
-+ device_create_file(&client->dev, &dev_attr_dtrim);
-+
-+ return 0;
-+
-+exit_detach:
-+ i2c_detach_client(client);
-+
-+exit_kfree:
-+ kfree(client);
-+
-+exit:
-+ return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ kfree(client);
-+
-+ return 0;
-+}
-+
-+static int __init x1205_init(void)
-+{
-+ return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+ i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+ "Karen Spearel <kas11@tampabay.rr.com>, "
-+ "Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-test.c 2006-01-04 01:27:19.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * An RTC test device/driver
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/rtc.h>
-+#include <linux/platform_device.h>
-+
-+static int test_rtc_read_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_set_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_read_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ rtc_time_to_tm(get_seconds(), tm);
-+ return 0;
-+}
-+
-+static int test_rtc_set_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ struct platform_device *plat_dev = to_platform_device(dev);
-+
-+ seq_printf(seq, "24hr\t\t: yes\n");
-+ seq_printf(seq, "test\t\t: yes\n");
-+ seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
-+
-+ return 0;
-+}
-+
-+static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ /* We do support interrupts, they're generated
-+ * using the sysfs interface.
-+ */
-+ switch (cmd) {
-+ case RTC_PIE_ON:
-+ case RTC_PIE_OFF:
-+ case RTC_UIE_ON:
-+ case RTC_UIE_OFF:
-+ case RTC_AIE_ON:
-+ case RTC_AIE_OFF:
-+ return 0;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static struct rtc_class_ops test_rtc_ops = {
-+ .proc = test_rtc_proc,
-+ .read_time = test_rtc_read_time,
-+ .set_time = test_rtc_set_time,
-+ .read_alarm = test_rtc_read_alarm,
-+ .set_alarm = test_rtc_set_alarm,
-+ .set_mmss = test_rtc_set_mmss,
-+ .ioctl = test_rtc_ioctl,
-+};
-+
-+static ssize_t test_irq_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", 42);
-+}
-+static ssize_t test_irq_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ int retval;
-+ struct platform_device *plat_dev = to_platform_device(dev);
-+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+ retval = count;
-+ if (strncmp(buf, "tick", 4) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF);
-+ else if (strncmp(buf, "alarm", 5) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF);
-+ else if (strncmp(buf, "update", 6) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF);
-+ else
-+ retval = -EINVAL;
-+
-+ return retval;
-+}
-+static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store);
-+
-+static int test_probe(struct platform_device *plat_dev)
-+{
-+ int err;
-+ struct rtc_device *rtc = rtc_device_register("test", &plat_dev->dev,
-+ &test_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&plat_dev->dev,
-+ "unable to register the class device\n");
-+ return err;
-+ }
-+ device_create_file(&plat_dev->dev, &dev_attr_irq);
-+
-+ platform_set_drvdata(plat_dev, rtc);
-+
-+ return 0;
-+}
-+
-+static int test_remove(struct platform_device *plat_dev)
-+{
-+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+ rtc_device_unregister(rtc);
-+ device_remove_file(&plat_dev->dev, &dev_attr_irq);
-+
-+ return 0;
-+}
-+
-+static void test_release(struct device * dev)
-+{
-+}
-+
-+struct platform_device test_dev_zero = {
-+ .name = "rtc-test",
-+ .id = 0,
-+ .dev.release = test_release,
-+};
-+
-+struct platform_device test_dev_one = {
-+ .name = "rtc-test",
-+ .id = 1,
-+ .dev.release = test_release,
-+};
-+
-+struct platform_driver test_drv = {
-+ .probe = test_probe,
-+ .remove = test_remove,
-+ .driver = {
-+ .name = "rtc-test",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init test_init(void)
-+{
-+ platform_device_register(&test_dev_zero);
-+ platform_device_register(&test_dev_one);
-+ platform_driver_register(&test_drv);
-+
-+ return 0;
-+}
-+
-+static void __exit test_exit(void)
-+{
-+ platform_driver_unregister(&test_drv);
-+ platform_device_unregister(&test_dev_zero);
-+ platform_device_unregister(&test_dev_one);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC test driver/device");
-+MODULE_LICENSE("GPL");
-+
-+module_init(test_init);
-+module_exit(test_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-ds1672.c 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,266 @@
-+/*
-+ * An rtc/i2c driver for the Dallas DS1672
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/rtc.h>
-+
-+#define DRV_VERSION "0.1"
-+
-+/* Addresses to scan: none. This chip cannot be detected. */
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* Registers */
-+
-+#define DS1672_REG_CNT_BASE 0
-+#define DS1672_REG_CONTROL 4
-+#define DS1672_REG_TRICKLE 5
-+
-+
-+/* Prototypes */
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+/*
-+ * In the routines that deal directly with the ds1672 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned long time;
-+ unsigned char buf[4];
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - counters=%02x,%02x,%02x,%02x\n"
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3]);
-+
-+ time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
-+
-+ rtc_time_to_tm(time, tm);
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ return 0;
-+}
-+
-+static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs)
-+{
-+ int xfer;
-+ unsigned char buf[5];
-+
-+ buf[0] = DS1672_REG_CNT_BASE;
-+ buf[1] = secs & 0x000000FF;
-+ buf[2] = (secs & 0x0000FF00) >> 8;
-+ buf[3] = (secs & 0x00FF0000) >> 16;
-+ buf[4] = (secs & 0xFF000000) >> 24;
-+
-+ xfer = i2c_master_send(client, buf, 5);
-+ if (xfer != 5) {
-+ dev_err(&client->dev, "%s: send: %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ds1672_set_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned long secs;
-+
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d, ",
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ rtc_tm_to_time(tm, &secs);
-+
-+ return ds1672_set_mmss(client, secs);
-+}
-+
-+static int ds1672_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+ struct timespec tv;
-+
-+ if ((err = ds1672_get_datetime(client, &tm)) != 0)
-+ return err;
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%02d-%02d %02d:%02d:%02d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ return ds1672_get_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ return ds1672_set_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ return ds1672_set_mmss(to_i2c_client(dev), secs);
-+}
-+
-+static struct rtc_class_ops ds1672_rtc_ops = {
-+ .read_time = ds1672_rtc_read_time,
-+ .set_time = ds1672_rtc_set_time,
-+ .set_mmss = ds1672_rtc_set_mmss,
-+};
-+
-+static int ds1672_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, ds1672_probe);
-+}
-+
-+static int ds1672_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ kfree(client);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver ds1672_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "ds1672",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &ds1672_attach,
-+ .detach_client = &ds1672_detach,
-+};
-+
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int err = 0;
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* I2C client */
-+ client->addr = address;
-+ client->driver = &ds1672_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, ds1672_driver.name, I2C_NAME_SIZE);
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ rtc = rtc_device_register(ds1672_driver.name, &client->dev,
-+ &ds1672_rtc_ops, THIS_MODULE);
-+
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&client->dev,
-+ "unable to register the class device\n");
-+ goto exit_detach;
-+ }
-+
-+ i2c_set_clientdata(client, rtc);
-+
-+ /* If requested, set the system time */
-+ if (hctosys) {
-+ if ((err = ds1672_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-+
-+ return 0;
-+
-+exit_detach:
-+ i2c_detach_client(client);
-+
-+exit_kfree:
-+ kfree(client);
-+
-+exit:
-+ return err;
-+}
-+
-+static int __init ds1672_init(void)
-+{
-+ return i2c_add_driver(&ds1672_driver);
-+}
-+
-+static void __exit ds1672_exit(void)
-+{
-+ i2c_del_driver(&ds1672_driver);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(ds1672_init);
-+module_exit(ds1672_exit);
+++ /dev/null
- drivers/input/misc/Kconfig | 12 +++
- drivers/input/misc/Makefile | 1
- drivers/input/misc/nslu2spkr.c | 148 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 161 insertions(+)
-
---- linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- tristate "M68k Beeper support"
- depends on M68K
-
-+config INPUT_NSLU2_BEEPER
-+ tristate "NSLU2 Beeper support"
-+ depends on MACH_NSLU2
-+ help
-+ Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+ to be used for bells and whistles.
-+
-+ If unsure, say Y.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- tristate "User level driver support"
- help
---- linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
- obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT) += uinput.o
- obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,148 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+ unsigned int count = 0;
-+ unsigned long flags;
-+
-+ if (type != EV_SND)
-+ return -1;
-+
-+ switch (code) {
-+ case SND_BELL:
-+ if (value) value = 1000;
-+ case SND_TONE:
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ if (value > 20 && value < 32767)
-+ count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+ spin_lock_irqsave(&beep_lock, flags);
-+
-+ if (count) {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+ } else {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+ *IXP4XX_OSRT2 = 0;
-+ }
-+
-+ spin_unlock_irqrestore(&beep_lock, flags);
-+
-+ return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+ .phys = "ixp420/gpio4",
-+ .name = "NSLU2 Beeper",
-+ .evbit[0] = BIT(EV_SND),
-+ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE),
-+ .event = nslu2_spkr_event,
-+ .id = {
-+ .bustype = BUS_HOST,
-+ .vendor = 0x001f,
-+ .product = 0x0001,
-+ .version = 0x0100
-+ }
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* clear interrupt */
-+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+ /* flip the beeper output */
-+ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return -ENODEV;
-+
-+ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+ SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) {
-+
-+ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+ IRQ_IXP4XX_TIMER2);
-+
-+ return -EIO;
-+ }
-+
-+ input_register_device(&nslu2_spkr_dev);
-+
-+ /* do a little beep to tell the world we are alive */
-+ if (beep_on_startup)
-+ {
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+ msleep(120);
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+ }
-+
-+ printk(KERN_INFO "NSLU2: beeper\n");
-+ return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+ input_unregister_device(&nslu2_spkr_dev);
-+
-+ disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+ /* turn it off */
-+ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+ free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
- arch/arm/Kconfig | 8 -
- arch/arm/mach-ixp4xx/Makefile | 4
- arch/arm/mach-ixp4xx/nslu2-leds.c | 223 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 232 insertions(+), 3 deletions(-)
-
---- linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -418,7 +418,8 @@ config LEDS
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+ MACH_NSLU2
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-@@ -432,7 +433,7 @@ config LEDS
-
- config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- depends on LEDS
- default y if ARCH_EBSA110
- help
-@@ -448,7 +449,8 @@ config LEDS_TIMER
-
- config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+ || MACH_NSLU2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
---- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-
-+leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
-+obj-$(CONFIG_LEDS) += $(leds-y)
-+
-+
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ * Copyright (C) 1998-1999 Russell King
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED 0x01
-+#define LED_STATE_CLAIMED 0x02
-+#define LED_STATE_IDLE 0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+static const unsigned long idle_seq[4] = {
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+#endif
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds_lock, flags);
-+
-+ switch (evt) {
-+ case led_start:
-+ /* Let's rock! Red led on, all others off. Remember
-+ * that disk1/disk2 works inverted.
-+ */
-+ led_state = LED_STATE_ENABLED;
-+ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+ | NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_stop:
-+ led_state &= ~LED_STATE_ENABLED;
-+ break;
-+
-+ case led_claim:
-+ /* The user claimed the interface, red and green off */
-+ led_state |= LED_STATE_CLAIMED;
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_release:
-+ /* The user released the interface, preserve the last
-+ * status of the leds, except red/green.
-+ */
-+ led_state &= ~LED_STATE_CLAIMED;
-+ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer:
-+ /* Pulse green led */
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ {
-+ /* clear red and green bits */
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+ /* copy the right sequence in */
-+ if (led_state & LED_STATE_IDLE)
-+ hw_led_state |= idle_seq[led_count % 4];
-+ else
-+ hw_led_state |= busy_seq[led_count % 4];
-+
-+ led_count++;
-+ }
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+ case led_idle_start:
-+ led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red off */
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+
-+ case led_idle_end:
-+ led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red on -> amber on */
-+ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+#endif /* CONFIG_LEDS_CPU */
-+
-+ case led_halted:
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ /* leds */
-+
-+ case led_green_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_green_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_amber_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_amber_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_red_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_red_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&leds_lock, flags);
-+
-+ if (led_state & LED_STATE_ENABLED) {
-+ spin_lock_irqsave(&gpio_lock, flags);
-+ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+ spin_unlock_irqrestore(&gpio_lock, flags);
-+ }
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+ void *ptr)
-+{
-+#ifdef CONFIG_LEDS_TIMER
-+ leds_event(led_claim);
-+#endif
-+ leds_event(led_green_off);
-+ leds_event(led_red_on);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+ .notifier_call = nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: leds\n");
-+
-+ /* register panic notifier */
-+ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+ /* enable gpio 0-3 */
-+ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+ leds_event = nslu2_leds_event;
-+
-+ /* this will also initialize the leds to the
-+ * default state.
-+ */
-+
-+ leds_event(led_start);
-+
-+ return 0;
-+}
-+
-+module_init(nslu2_leds_init);
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o
-
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+//
-+//=============================================================================
-+// GPIO Function State
-+// 0 Red LED Status
-+// 1 Green LED Ready = 1
-+// 2 Disk 2 LED On = 0
-+// 3 Disk 1 LED On = 0
-+// 4 Buzzer
-+// 5 Power Button Pressed = 1
-+// 8 Power Down Output = 1 powers down NSLU2
-+// 12 Reset Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION "0.1.7"
-+
-+#define NSLU2BZ_MAJOR 62 //buzzer
-+#define NSLU2LM_MAJOR 126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG 2000
-+#define NSLU2_BEEP_DUR_MED 400
-+#define NSLU2_BEEP_DUR_SHORT 100
-+#define NSLU2_BEEP_PITCH_HIGH 250
-+#define NSLU2_BEEP_PITCH_MED 500
-+#define NSLU2_BEEP_PITCH_LOW 1000
-+#define NSLU2_LONG_DELAY 30000
-+
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
-+#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF _IOW('M',32,long)
-+#define NSLU2LM_ON _IOW('M',33,long)
-+#define NSLU2LM_BLINK _IOW('M',34,long)
-+#define NSLU2LM_ALT _IOW('M',35,long)
-+#define NSLU2LM_ALL_ON _IO('M',36)
-+#define NSLU2LM_ALL_OFF _IO('M',37)
-+
-+#define PHYS_LEDS 4
-+#define BLINK_DELAY 25
-+
-+// OR Masks to turn these LEDs ON
-+
-+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
-+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
-+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
-+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
-+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
-+#define RS_GRN_TGL 0x00000002
-+#define RS_RED_TGL 0x00000001
-+#define DISK1_TGL 0x00000008
-+#define DISK2_TGL 0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED 0
-+#define LED_RS_GRN 1
-+#define LED_DISK1 2
-+#define LED_DISK2 3
-+#define LED_ALL 4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer; //rs green
-+static struct timer_list n2lm_rsr_timer; //rs red
-+static struct timer_list n2lm_d1_timer; //drive 1
-+static struct timer_list n2lm_d2_timer; //drive 2
-+static struct timer_list n2bz_timer; //beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit. No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
-+ add_timer(&n2lm_rsg_timer); //reinit timer
-+ return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ return;
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+ switch(led) {
-+ case LED_RS_RED:
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ break;
-+
-+ case LED_RS_GRN:
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsg_timer);
-+ break;
-+
-+ case LED_DISK1:
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ break;
-+
-+ case LED_DISK2:
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+ switch (led) {
-+ case LED_RS_RED:
-+ del_timer(&n2lm_rsr_timer);
-+ break;
-+ case LED_RS_GRN:
-+ del_timer(&n2lm_rsg_timer);
-+ break;
-+ case LED_DISK1:
-+ del_timer(&n2lm_d1_timer);
-+ break;
-+ case LED_DISK2:
-+ del_timer(&n2lm_d2_timer);
-+ break;
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+ return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
-+ return;
-+ case LED_ALL: //all green
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+ return;
-+ }
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
-+ return;
-+ case LED_ALL:
-+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+ }
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+
-+ if (led < 0 || led >= PHYS_LEDS)
-+ return -EINVAL;
-+
-+ switch (cmd ) {
-+ case NSLU2LM_ON:
-+ n2lm_timer_stop(led);
-+ n2lm_ledon(led);
-+ break;
-+
-+ case NSLU2LM_OFF:
-+ n2lm_timer_stop(led);
-+ n2lm_ledoff(led);
-+ break;
-+
-+ case NSLU2LM_BLINK:
-+ n2lm_ledon(led);
-+ if (led == LED_RS_RED)
-+ n2lm_rsr_timer.data = RS_RED_TGL;
-+ n2lm_timer_start(led);
-+ break;
-+
-+ case NSLU2LM_ALT:
-+ if (led == LED_RS_RED)
-+ {
-+ n2lm_ledon(LED_RS_GRN);
-+ n2lm_ledoff(LED_RS_RED);
-+ n2lm_rsr_timer.data = RS_RG_ALT;
-+ n2lm_timer_start(LED_RS_RED);
-+ break;
-+ } else
-+ return -EINVAL;
-+
-+ case NSLU2LM_ALL_ON:
-+ n2lm_timer_stop_all();
-+ n2lm_ledon(LED_ALL);
-+ break;
-+
-+ case NSLU2LM_ALL_OFF:
-+ n2lm_timer_stop_all();
-+ n2lm_ledoff(LED_ALL);
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
-+// important should be haprepening.
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+ int i;
-+
-+ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+
-+ for (i = 1; i < duration; i++) {
-+ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ }
-+ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+ return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+ if (--bz_repeatcnt > 0) { //if just one beep left to do
-+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
-+ add_timer(&n2bz_timer); //reinit timer
-+ }
-+ n2_buzz(tone/2, ontime);
-+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+ switch (cmd) {
-+ case NSLU2BZ_BEEP:
-+ n2_buzz(tone/2, ontime);
-+ break;
-+
-+ case NSLU2BZ_BEEP_STOP:
-+ del_timer(&n2bz_timer);
-+ break;
-+
-+ case NSLU2BZ_BEEPS:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ n2bz_handler(0);
-+ break;
-+
-+ case NSLU2BZ_TONESET:
-+ if (param >= 250 && param <= 2000)
-+ tone = param;
-+ break;
-+
-+ case NSLU2BZ_ONTIME:
-+ if (param > 4 && param < 201)
-+ ontime = param;
-+ break;
-+
-+ case NSLU2BZ_SILENTTIME:
-+ if (param > ontime) //enforce a reasonable duty cycle
-+ offtime = param;
-+ else
-+ offtime = ontime;
-+ break;
-+
-+ case NSLU2BZ_REPEATCNT:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ break;
-+
-+ case NSLU2BZ_COMBINED:
-+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
-+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
-+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
-+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+ init_timer(&n2lm_rsg_timer);
-+ init_timer(&n2lm_rsr_timer);
-+ init_timer(&n2lm_d1_timer);
-+ init_timer(&n2lm_d2_timer);
-+
-+ n2lm_rsr_timer.function = n2lm_rsr_handler;
-+ n2lm_rsg_timer.function = n2lm_rsg_handler;
-+ n2lm_d2_timer.function = n2lm_d2_handler;
-+ n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+ init_timer(&n2bz_timer);
-+ n2bz_timer.function = n2bz_handler;
-+
-+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
-+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
-+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+ n2lm_ledon(LED_ALL);
-+ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+ n2lm_ledoff(LED_ALL);
-+
-+ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+ n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+
-+ n2iom_initarch();
-+
-+ n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ }
-+#endif
-+
-+ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ }
-+
-+ return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+
-+ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+ class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp
- * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board. Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
- *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+ /* This will cause the jiffies to drift unnecessarily. */
-+# error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required. The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values). The mathematics in
-+ * here require the following values. Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+# error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+ u32 reload;
-+
-+ /* Store the two effectively informational rate values, the
-+ * error calculation is (rate - count*HZ) (above), and rate
-+ * is changed first, this can cause a temporary error which
-+ * will be corrected on the next interrupt.
-+ */
-+ board_tick_rate = rate;
-+ board_tick_per_1000 = (rate+500)/1000;
-+
-+ /* Calculate the correct value to load into the timer countdown
-+ * register, the low two bits must be b01 (to enable the timer).
-+ * Select the top bits to be as close to the desired value as
-+ * possible.
-+ *
-+ * First find the best value, regardless of the low two bits -
-+ * this is the value used in the interrupt calculation even though
-+ * it cannot necessarily be set into the register.
-+ */
-+ timer_count = (rate + (HZ/2))/HZ;
-+
-+ /* Now the timer_ticks are being generated at this rate, calculate
-+ * an appropriate value for the register. This stores a 30 bit
-+ * value which gives a period of 4*x+1, we want:
-+ *
-+ * 4*x+1 = board_tick_rate/HZ
-+ *
-+ * This needs to be rounded to the closest 4*HZ value:
-+ *
-+ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+ * x = (board_tick_rate+HZ) / (4*HZ);
-+ */
-+ reload = (board_tick_rate + HZ) / HZ;
-+ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ *IXP4XX_OSRT1 = reload;
-
--static unsigned volatile last_jiffy_time;
-+ /* If the clock is drifing, look in syslog: */
-+ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
-
--#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above. Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+ return *IXP4XX_OSTS - last_timer_time;
-+}
-
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
-- u32 elapsed;
--
-- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+ /* Return the offset of the current time from the last time
-+ * timer tick in microseconds. This is only used for the
-+ * gettimeofday call.
-+ *
-+ * The result of this API is at most about 20000 (for a 50Hz
-+ * HZ - 20000 uS/tick), the input delta is at most about
-+ * 1.3M - 21 bits.
-+ */
-+ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+ /* return delta * 1000000 / board_tick_rate; */
-+ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
-
-- return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+ if (error >= HZ)
-+ return 1;
-+ else if (error <= -HZ)
-+ return -1;
-+ return 0;
- }
-
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+ u32 rate;
-+ u32 count;
-+ int error;
-+
- write_seqlock(&xtime_lock);
-
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-+ /* If the board tick rate has been changed update the cached
-+ * value.
-+ */
-+ if (ixp4xx_board_tick_rate != board_tick_rate) {
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-+ accumulated_error = 0;
-+ }
-+
- /*
- * Catch up with the real idea of time
-+ *
-+ * board_tick_rate: actual ixp4xx ticks/second, read-only
-+ * accumulated_error: aggregate error/tick * HZ, read/write
-+ * timer_count: best ixp4xx ticks per timer_tick, read-only
- */
-- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+ rate = board_tick_rate;
-+ error = accumulated_error;
-+ count = timer_count;
-+ do {
-+ u32 adjusted_count = count + adjustment(error);
-+ if (ixp4xx_timer_delta() < adjusted_count)
-+ break;
- timer_tick(regs);
-- last_jiffy_time += LATCH;
-- }
-+ last_timer_time += adjusted_count;
-+ error += rate - adjusted_count*HZ;
-+ } while (1);
-+ accumulated_error = error;
-
- write_sequnlock(&xtime_lock);
-
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
-+u32 ixp4xx_get_board_tick_rate(void) {
-+ return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+ ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
- /* Setup the Timer counter value */
-- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-
- /* Reset time-stamp counter */
- *IXP4XX_OSTS = 0;
-- last_jiffy_time = 0;
-+ last_timer_time = 0;
-+ accumulated_error = 0;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- ARRAY_SIZE(ixp46x_devices));
- }
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
-
- static void __init nslu2_init(void)
- {
-+ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+ * from the typical value.
-+ */
-+ ixp4xx_set_board_tick_rate(66000000);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- }
-
- if (value > 20 && value < 32767)
-- count = (NSLU2_FREQ / (value*4)) - 1;
-+ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
-
- spin_lock_irqsave(&beep_lock, flags);
-
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN 8
-
-
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
-
- #define NSLU2_GPIO0 0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
-
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt. Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
- */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
-
-+/* The following allow the exact board tick rate to be set and
-+ * discovered. The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Nov 14 10:44:43 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_NSLU2_BEEPER=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-# CONFIG_VIDEO_SAA7134_ALSA is not set
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_CLASS=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-CONFIG_RTC_DRV_X1205=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_NATIVE_ENDIAN is not set
-CONFIG_JFFS2_BIG_ENDIAN=y
-# CONFIG_JFFS2_LITTLE_ENDIAN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-diff -ur linux-2.6.12.2/drivers/scsi/sd.c linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c
---- linux-2.6.12.2/drivers/scsi/sd.c 2005-08-27 06:12:31.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c 2005-08-27 06:26:50.000000000 +0200
-@@ -266,6 +266,9 @@
- "count=%d\n", disk->disk_name,
- (unsigned long long)block, this_count));
-
-+ /* Update idle-since time */
-+ sdp->idle = jiffies;
-+
- if (!sdp || !scsi_device_online(sdp) ||
- block + rq->nr_sectors > get_capacity(disk)) {
- SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
-@@ -600,6 +603,8 @@
- case SCSI_IOCTL_GET_IDLUN:
- case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdp, cmd, p);
-+ case SCSI_IOCTL_IDLE:
-+ return (jiffies - sdp->idle) / HZ + 1;
- default:
- error = scsi_cmd_ioctl(filp, disk, cmd, p);
- if (error != -ENOTTY)
-diff -ur linux-2.6.12.2/include/scsi/scsi_device.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h
---- linux-2.6.12.2/include/scsi/scsi_device.h 2005-08-27 06:12:44.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h 2005-08-27 06:27:09.000000000 +0200
-@@ -125,6 +125,7 @@
- atomic_t ioerr_cnt;
-
- int timeout;
-+ unsigned long idle; /* scsi idle time in jiffers */
-
- struct device sdev_gendev;
- struct class_device sdev_classdev;
-diff -ur linux-2.6.12.2/include/scsi/scsi_ioctl.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h
---- linux-2.6.12.2/include/scsi/scsi_ioctl.h 2005-08-27 06:12:44.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h 2005-08-28 17:32:17.000000000 +0200
-@@ -7,6 +7,7 @@
- #define SCSI_IOCTL_SYNC 4 /* Request synchronous parameters */
- #define SCSI_IOCTL_START_UNIT 5
- #define SCSI_IOCTL_STOP_UNIT 6
-+#define SCSI_IOCTL_IDLE 4746 /* get idle time in jiffies */
- /* The door lock/unlock constants are compatible with Sun constants for
- the cdrom */
- #define SCSI_IOCTL_DOORLOCK 0x5380 /* lock the eject mechanism */
+++ /dev/null
---- linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,23 @@
-+#ifndef _MACLIST_H
-+#define _MACLIST_H 1
-+/*
-+ * Interfaces to the MAC repository
-+ */
-+/*
-+ * Add a single entry, returns 0 on success else an error
-+ * code. Must *not* be called from an interrupt handler.
-+ */
-+extern int maclist_add(const u8 id_to_add[6]);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+extern int maclist_count(void);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return);
-+
-+#endif /*_MACLIST_H*/
---- linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,314 @@
-+/*
-+ * drivers/net/maclist.c
-+ *
-+ * a simple driver to remember ethernet MAC values
-+ *
-+ * Some Ethernet hardware implementations have no built-in
-+ * storage for allocated MAC values - an example is the Intel
-+ * IXP420 chip which has support for Ethernet but no defined
-+ * way of storing allocated MAC values. With such hardware
-+ * different board level implementations store the allocated
-+ * MAC (or MACs) in different ways. Rather than put board
-+ * level code into a specific Ethernet driver this driver
-+ * provides a generally accessible repository for the MACs
-+ * which can be written by board level code and read by the
-+ * driver.
-+ *
-+ * The implementation also allows user level programs to
-+ * access the MAC information in /proc/net/maclist. This is
-+ * useful as it allows user space code to use the MAC if it
-+ * is not used by a built-in driver.
-+ *
-+ * Copyright (C) 2005 John Bowler
-+ * Author: John Bowler <jbowler@acm.org>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * External interfaces:
-+ * Interfaces to linux kernel (and modules)
-+ * maclist_add: add a single MAC
-+ * maclist_count: total number of MACs stored
-+ * maclist_read: read a MAC 0..(maclist_count-1)
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/etherdevice.h>
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+
-+#include <net/maclist.h>
-+
-+#define MACLIST_NAME "maclist"
-+
-+MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
-+MODULE_DESCRIPTION("MAC list repository");
-+MODULE_LICENSE("GPL");
-+
-+typedef struct maclist_entry {
-+ struct maclist_entry *next; /* Linked list, first first */
-+ u8 id[6]; /* 6 byte Ethernet MAC */
-+} maclist_entry_t;
-+
-+/* Access to this list is possible at any time - entries in
-+ * the list are never destroyed. Modification of the list is
-+ * safe only from the init code (i.e. modification must be
-+ * single threaded), but read from an interrupt at the same
-+ * time is possible and safe.
-+ */
-+static maclist_entry_t *maclist_list = 0;
-+
-+/*
-+ * External interfaces.
-+ *
-+ * Add a single entry, returns 0 on success else an error
-+ * code. Must be single threaded.
-+ */
-+int maclist_add(const u8 new_id[6]) {
-+ maclist_entry_t *new_entry, **tail;
-+
-+ if (new_id == 0 || !is_valid_ether_addr(new_id)) {
-+ printk(KERN_ERR MACLIST_NAME ": invalid ethernet address\n");
-+ return -EINVAL;
-+ }
-+ new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL);
-+ if (new_entry == 0)
-+ return -ENOMEM;
-+ new_entry->next = 0;
-+ memcpy(new_entry->id, new_id, sizeof new_entry->id);
-+
-+ tail = &maclist_list;
-+ while (*tail != 0)
-+ tail = &(*tail)->next;
-+ *tail = new_entry;
-+ return 0;
-+}
-+EXPORT_SYMBOL(maclist_add);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+int maclist_count(void) {
-+ maclist_entry_t *tail = maclist_list;
-+ int count = 0;
-+
-+ while (tail != 0) {
-+ tail = tail->next;
-+ ++count;
-+ }
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(maclist_count);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+int maclist_read(u8 (*id)[6], int n) {
-+ maclist_entry_t *entry = maclist_list;
-+
-+ while (n > 0 && entry != 0) {
-+ --n;
-+ entry = entry->next;
-+ }
-+
-+ if (n == 0 && entry != 0) {
-+ memcpy(id, entry->id, sizeof *id);
-+ return 0;
-+ }
-+
-+ printk(KERN_ERR MACLIST_NAME ": id does not exist\n");
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(maclist_read);
-+
-+/*
-+ * Parameter parsing. The option string is a list of MAC
-+ * addresses, comma separated. (The parsing really should
-+ * be somewhere central...)
-+ */
-+static int __init maclist_setup(char *param) {
-+ int bytes = 0, seen_a_digit = 0;
-+ u8 id[6];
-+
-+ memset(id, 0, sizeof id);
-+
-+ if (param) do {
-+ int digit = -1;
-+ switch (*param) {
-+ case '0': digit = 0; break;
-+ case '1': digit = 1; break;
-+ case '2': digit = 2; break;
-+ case '3': digit = 3; break;
-+ case '4': digit = 4; break;
-+ case '5': digit = 5; break;
-+ case '6': digit = 6; break;
-+ case '7': digit = 7; break;
-+ case '8': digit = 8; break;
-+ case '9': digit = 9; break;
-+ case 'a': case 'A': digit = 10; break;
-+ case 'b': case 'B': digit = 11; break;
-+ case 'c': case 'C': digit = 12; break;
-+ case 'd': case 'D': digit = 13; break;
-+ case 'e': case 'E': digit = 14; break;
-+ case 'f': case 'F': digit = 15; break;
-+ case ':':
-+ if (seen_a_digit)
-+ bytes = (bytes+1) & ~1;
-+ else
-+ bytes += 2; /* i.e. ff::ff is ff:00:ff */
-+ seen_a_digit = 0;
-+ break;
-+ case 0:
-+ if (bytes == 0) /* nothing new seen so far */
-+ return 0;
-+ /*fall through*/
-+ case ',': case ';':
-+ if (bytes > 0)
-+ bytes = 12; /* i.e. all trailing bytes 0 */
-+ break;
-+ default:
-+ printk(KERN_ERR MACLIST_NAME ": invalid character <%c[%d]>\n",
-+ *param, *param);
-+ return -EINVAL;
-+ }
-+
-+ if (digit >= 0) {
-+ id[bytes>>1] = (id[bytes>>1] << 4) + digit; break;
-+ ++bytes;
-+ seen_a_digit = 1;
-+ }
-+
-+ if (bytes >= 12) {
-+ int rc = maclist_add(id);
-+ if (rc)
-+ return rc;
-+ bytes = 0;
-+ seen_a_digit = 0;
-+ memset(id, 0, sizeof id);
-+ if (*param == 0)
-+ return 0;
-+ }
-+ ++param;
-+ } while (1);
-+
-+ return 0;
-+}
-+
-+/*
-+ * procfs support, if compiled in.
-+ */
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * Character device read
-+ */
-+static int maclist_getchar(off_t n) {
-+ static char xdigit[16] = "0123456789abcdef";
-+ maclist_entry_t *head = maclist_list;
-+ int b;
-+
-+ do {
-+ if (head == 0)
-+ return -1;
-+ if (n < 18)
-+ break;
-+ head = head->next;
-+ n -= 18;
-+ } while (1);
-+
-+ if (n == 17)
-+ return '\n';
-+
-+ b = n/3;
-+ switch (n - b*3) {
-+ case 0: return xdigit[head->id[b] >> 4];
-+ case 1: return xdigit[head->id[b] & 0xf];
-+ default: return ':';
-+ }
-+}
-+
-+/*
-+ * The extensively undocumented proc_read_t callback is implemented here.
-+ * Go look in fs/proc/generic.c:
-+ *
-+ * Prototype:
-+ * int f(char *buffer, char **start, off_t offset,
-+ * int count, int *peof, void *dat)
-+ *
-+ * Assume that the buffer is "count" bytes in size.
-+ *
-+ * 2) Set *start = an address within the buffer.
-+ * Put the data of the requested offset at *start.
-+ * Return the number of bytes of data placed there.
-+ * If this number is greater than zero and you
-+ * didn't signal eof and the reader is prepared to
-+ * take more data you will be called again with the
-+ * requested offset advanced by the number of bytes
-+ * absorbed.
-+ */
-+static int maclist_proc_read(char *buffer, char **start, off_t offset,
-+ int count, int *peof, void *dat) {
-+ int total;
-+
-+ *start = buffer;
-+ total = 0;
-+
-+ while (total < count) {
-+ int ch = maclist_getchar(offset++);
-+ if (ch == -1) {
-+ *peof = 1;
-+ break;
-+ }
-+ *buffer++ = ch;
-+ ++total;
-+ }
-+
-+ return total;
-+}
-+#endif
-+
-+/*
-+ * Finally, the init/exit functions.
-+ */
-+static void __exit maclist_exit(void)
-+{
-+ maclist_entry_t *list;
-+
-+ remove_proc_entry(MACLIST_NAME, proc_net);
-+
-+ list = maclist_list;
-+ maclist_list = 0;
-+
-+ while (list != 0) {
-+ maclist_entry_t *head = list;
-+ list = head->next;
-+ kfree(head);
-+ }
-+}
-+
-+#ifdef MODULE
-+static char ids[256];
-+module_param_string(ids, ids, sizeof ids, 0);
-+MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
-+#else
-+__setup("maclist_ids=", maclist_setup);
-+#endif
-+
-+static int __init maclist_init(void)
-+{
-+# ifdef MODULE
-+ if (ids[0])
-+ maclist_setup(ids);
-+# endif
-+
-+ /* Ignore failure, the module will still work. */
-+ (void)create_proc_read_entry(MACLIST_NAME, S_IRUGO, proc_net, maclist_proc_read, NULL);
-+
-+ return 0;
-+}
-+
-+module_init(maclist_init);
-+module_exit(maclist_exit);
---- linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
- # end link order section
- #
-
-+obj-$(CONFIG_MACLIST) += maclist.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
-
---- linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -166,6 +166,21 @@ config NET_ETHERNET
- kernel: saying N will just cause the configurator to skip all
- the questions about Ethernet network cards. If unsure, say N.
-
-+config MACLIST
-+ tristate "Ethernet MAC repository"
-+ depends on NET_ETHERNET
-+ help
-+ Some ethernet controllers have no built-in way of obtaining an
-+ appropriate Ethernet MAC address. Such controllers have to be
-+ initialised in a board-specific way, depending on how the allocated
-+ MAC is stored. The MAC repository provides a set of APIs and a
-+ proc entry (/proc/net/maclist) to store MAC values from the board
-+ so that such drivers can obtain a MAC address without board-specific
-+ code. You do not need to enable this device - it will be selected
-+ automatically by any device which requires it. It is only useful
-+ to enable it manually when building a device driver independently
-+ of the kernel build.
-+
- config MII
- tristate "Generic Media Independent Interface device support"
- depends on NET_ETHERNET
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -11,8 +11,8 @@ comment "IXP4xx Platforms"
- # This entry is placed on top because otherwise it would have
- # been shown as a submenu.
- config MACH_NSLU2
-- bool
-- prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+ bool "NSLU2"
-+ select MACLIST
- help
- Say 'Y' here if you want your kernel to support Linksys's
- NSLU2 NAS device. For more information on this platform,
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -16,11 +16,14 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-
-+#include <net/maclist.h>
-+
- static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -112,6 +115,37 @@ static void nslu2_power_off(void)
- gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+/*
-+ * When the RedBoot partition is added the MAC address is read from
-+ * it.
-+ */
-+void flash_add(struct mtd_info *mtd) {
-+ if (strcmp(mtd->name, "RedBoot") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ /* The MAC is at a known offset... */
-+ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "NSLU2 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ maclist_add(mac);
-+ } else {
-+ printk(KERN_ERR "NSLU2 MAC: read failed\n");
-+ }
-+ }
-+}
-+
-+/*
-+ * Nothing to do on remove at present.
-+ */
-+void flash_remove(struct mtd_info *mtd) {
-+}
-+
-+struct mtd_notifier flash_notifier = {
-+ .add = flash_add,
-+ .remove = flash_remove,
-+};
-+
- static void __init nslu2_init(void)
- {
- /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-@@ -119,6 +153,11 @@ static void __init nslu2_init(void)
- */
- ixp4xx_set_board_tick_rate(66000000);
-
-+ /* The flash has an ethernet MAC embedded in it which we need,
-+ * that is all this notifier does.
-+ */
-+ register_mtd_user(&flash_notifier);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
+++ /dev/null
---- linux-2.6.11/arch/arm/Makefile.orig 2005-03-20 15:02:07.587138712 -0800
-+++ linux-2.6.11/arch/arm/Makefile 2005-03-20 15:10:36.546765088 -0800
-@@ -33,6 +33,12 @@
- AFLAGS += -mlittle-endian
- endif
-
-+ifeq ($(CONFIG_ARM_THUMB_INTERWORK),y)
-+CFLAGS += -mthumb-interwork
-+else
-+CFLAGS += -mno-thumb-interwork
-+endif
-+
- comma = ,
-
- # This selects which instruction set is used.
-@@ -43,6 +49,8 @@
- arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
- arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
- arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
-+# The following overrides the CPU_32v5 setting if specified
-+arch-$(CONFIG_ARCH_XSCALE) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=xscale,-march=armv5te)
-
- # This selects how we optimise for the processor.
- tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610
---- linux-2.6.11/arch/arm/mm/Kconfig.orig 2005-03-20 14:54:07.927058128 -0800
-+++ linux-2.6.11/arch/arm/mm/Kconfig 2005-03-20 15:01:26.727350344 -0800
-@@ -366,6 +366,31 @@
-
- If you don't know what this all is, saying Y is a safe choice.
-
-+config ARM_THUMB_INTERWORK
-+ bool "Support Thumb code within the kernel"
-+ depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
-+ default n
-+ help
-+ Say Y to compile the whole kernel with support for the interworking
-+ of the 16 bit thumb instruction set and 32 bit ARM instruction set.
-+
-+ You only need this if some parts of the kernel will be compiled
-+ as thumb code, this is not usual. It increases the total kernel
-+ size by about 3%.
-+
-+config ARCH_XSCALE
-+ bool "Use -march=xscale in preference to -march=armv5te"
-+ depends on CPU_XSCALE
-+ default y
-+ help
-+ Say yes to ask gcc to use the xscale architecture (instruction set)
-+ in preference to armv5te. This allows gcc to use the extra xscale
-+ instructions but means the code will not run on a standard (non-xscale)
-+ armv5te. At present this makes no difference - gcc 3.4.3 does not
-+ generate any xscale specific instructions - however gcc 3.4.3 does
-+ generate slightly more optimal instructions if this is specified (this
-+ is an error inside gcc 3.4.3 which should be fixed in 4.1.)
-+
- config CPU_BIG_ENDIAN
- bool "Build big-endian kernel"
- depends on ARCH_SUPPORTS_BIG_ENDIAN
+++ /dev/null
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700
-@@ -52,7 +52,7 @@
- * Expansion BUS Configuration registers
- */
- #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
--#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000)
-+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
- #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
-
- /*
+++ /dev/null
---- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9
-+++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12
-@@ -158,6 +158,8 @@
- #define LED_DISK2 3
- #define LED_ALL 4
-
-+static int nslu2_shutdown_in_progress = 0;
-+
- static unsigned long init_jiffy = 0; //jiffies at init time
- static unsigned long rb_presses = 0; //number of reset button presses
- static unsigned long ontime = 50;
-@@ -503,40 +505,20 @@
- static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs)
- {
- void *ret;
--
-- wake_up(&n2pb_waitq);
-- remove_proc_entry(PWR_OFF_STR, NULL); //no parent
-- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED);
-- ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
-- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret));
--
--// WARNING: This is RUDE...it unconditionally pulls the power plug.
--// Your data will be at risk...since this is just a test system
--// I am leaving it enabled...eventually userland needs to get the
--// message, do an orderly shutdown and use an ioctl or something in
--// /proc/powerdowm to actually have us pull the plug.
--
-- machine_power_off();
--
-+ if (!nslu2_shutdown_in_progress++) {
-+ wake_up(&n2pb_waitq);
-+ remove_proc_entry(PWR_OFF_STR, NULL); //no parent
-+ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK"
-+ ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
-+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret));
-+ kill_proc(1,SIGINT,1); // Signal init to shut down
-+ } else {
-+ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise!
-+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine!
-+ }
- return IRQ_HANDLED;
- }
-
--//==================================================================================================
--//
--//static void do_rb_timeout(unsigned long data)
--//{
--// int i;
--//
--// for (i = 0; i < rb_presses; i++)
--// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT);
--// return;
--//}
--//
--//==================================================================================================
--// does nothing -- waiting for userland to define
--// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so
--// we hang in a loop until the button is no longer pressed
--
- struct testr {
- int ctl;
- long param;
-@@ -544,72 +526,11 @@
-
- static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs)
- {
-+// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable
-
-- static struct testr test[] = {
-- { N2LM_ALL_OFF,0 },
-- { N2LM_ON,0 },
-- { N2LM_OFF,0 },
-- { N2LM_ON,1 },
-- { N2LM_ALL_OFF,1 },
-- { N2LM_ON,2 },
-- { N2LM_OFF,2 },
-- { N2LM_ON,3 },
-- { N2LM_OFF,3 },
-- { N2LM_BLINK,0 },
-- { N2LM_OFF,0 },
-- { N2LM_BLINK,1 },
-- { N2LM_OFF,1 },
-- { N2LM_BLINK,2 },
-- { N2LM_OFF,2 },
-- { N2LM_BLINK,3 },
-- { N2LM_OFF,3 },
-- { N2LM_ALL_OFF,0 },
-- { N2LM_ALT,1 },
-- { N2LM_OFF,1 },
-- { N2LM_ALL_ON,0 }
-- };
--
-- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long)));
--
- wake_up(&n2rb_waitq);
-- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0)
-- ; //wait for button release
--
-- if (rb_presses > 20)
-- rb_presses = 0;
-- tone = (rb_presses * 50) + 200;
-- ontime = (rb_presses*10) + 100;
-- offtime = 500 - (rb_presses*20);
-- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone));
-- rb_presses++;
--
-- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses);
-- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param);
--// if (rb_presses == 0) {
--// init_jiffy = jiffies;
--// init_timer (&n2rb_timer);
--// n2rb_timer.function = do_rb_timeout;
--// };
--//
--// if (rb_presses == 8)
--// rb_presses = 0;
--// if (rb_presses & 1)
--// n2lm_ledon(test[rb_presses]);
--// else
--// n2lm_ledoff(test[rb_presses]);
--//
--// n2rb_timer.expires = (jiffies + RB_DELAY);
--// add_timer (&n2rb_timer);
--// if (rb_presses < 5) {
--// if (rb_presses > 0)
--// n2lm_ledoff(rb_presses);
--// n2lm_ledon(++rb_presses);
--// n2lm_timer_start(rb_presses);
--// };
--
-- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies));
-- return IRQ_HANDLED;
--
-+ machine_power_off();
-+ return IRQ_HANDLED; // So we don't get a nobody cared error :-P
- }
-
- //==================================================================================================
+++ /dev/null
-# This patch changes the thumb swi handling for any thumb swi with
-# an immediate value != 0, those swis are mapped into the arm
-# specific swis. This implements a thumb breakpoint swi.
---- linux-2.6.12.2/arch/arm/kernel/entry-common.S.orig 2005-09-19 12:48:42.323365573 -0700
-+++ linux-2.6.12.2/arch/arm/kernel/entry-common.S 2005-09-19 13:31:19.004247358 -0700
-@@ -137,8 +137,11 @@
- */
- #ifdef CONFIG_ARM_THUMB
- tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
-- addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
-- ldreq scno, [lr, #-4]
-+ ldrneh ip, [lr, #-2] @ thumb swi instruction
-+ ldreq scno, [lr, #-4] @ arm swi instruction
-+ addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in to thumb r7 value
-+ bicnes ip, ip, #0xff00 @ clear thumb swi bits
-+ addne scno, ip, #__ARM_NR_BASE @ thumb swi0->r7, swi!0->arm swi
- #else
- ldr scno, [lr, #-4] @ get SWI instruction
- #endif
+++ /dev/null
-# Fix for the NSLU2 timer problem (tickadj 10101.01 when it should be 10000)
-# Also contains a fix for the more generate problem on the ixp4xx in that the
-# Intel spec says to use a 33.33MHz crystal, not 33.333333Mhz
-
---- linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h.orig 2005-08-05 11:02:09.872690723 -0700
-+++ linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h 2005-08-05 11:45:08.786971567 -0700
-@@ -7,7 +7,14 @@
-
- /*
- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz
-+ * 66.66 MHz (exactly) by the Intel specification.
- */
--#define CLOCK_TICK_RATE (66666666)
--
-+#if 0
-+#define CLOCK_TICK_RATE (66660000)
-+#else
-+/*
-+ * Unfortunately the NSLU2 has a 33MHz crystal, so the rate is not the
-+ * specified one.
-+ */
-+#define CLOCK_TICK_RATE (66000000)
-+#endif
+++ /dev/null
---- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Kconfig 2005-06-17 17:51:28.635578329 -0700
-+++ linux-2.6.11/drivers/i2c/chips/Kconfig 2005-06-17 17:51:32.565982545 -0700
-@@ -430,6 +430,15 @@
-
- This driver can also be built as a module. If so, the module
- will be called isp1301_omap.
-+config SENSORS_X1205
-+ tristate "Xicor X1205 RTC chip"
-+ depends on I2C && EXPERIMENTAL
-+ select I2C_SENSOR
-+ help
-+ If you say yes here you get support for the Xicor x1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called x1205-rtc
-
- config SENSORS_M41T00
- tristate "ST M41T00 RTC chip"
---- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Makefile 2005-06-17 17:51:28.636578177 -0700
-+++ linux-2.6.11/drivers/i2c/chips/Makefile 2005-06-17 17:51:32.566982394 -0700
-@@ -41,6 +41,7 @@
- obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
- obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
-+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
---- linux-2.6.11/.pc/2.6.patch/include/linux/i2c-id.h 2005-06-17 17:51:31.358165630 -0700
-+++ linux-2.6.11/include/linux/i2c-id.h 2005-06-17 17:51:32.569981939 -0700
-@@ -108,6 +108,7 @@
- #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */
- #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */
- #define I2C_DRIVERID_SAA7114H 64 /* video decoder */
-+#define I2C_DRIVERID_X1205 0xF0
-
-
- #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */
+++ /dev/null
---- linux-2.6.11.2/scripts/mkcompile_h.orig 2005-05-07 05:27:02.440000000 +0000
-+++ linux-2.6.11.2/scripts/mkcompile_h 2005-05-07 05:28:30.360000000 +0000
-@@ -43,16 +43,9 @@
- echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
-
- echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
-- echo \#define LINUX_COMPILE_BY \"`whoami`\"
-- echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
--
-- if [ -x /bin/dnsdomainname ]; then
-- echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
-- elif [ -x /bin/domainname ]; then
-- echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
-- else
-- echo \#define LINUX_COMPILE_DOMAIN
-- fi
-+ echo \#define LINUX_COMPILE_BY \"openslug\"
-+ echo \#define LINUX_COMPILE_HOST \"openslug.org\"
-+ echo \#define LINUX_COMPILE_DOMAIN \"openslug.org\"
-
- echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\"
- ) > .tmpcompile
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r1.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
- file://00-memory-h-page-shift.patch;patch=1 \
- file://90-ixp4xx-pci-le.patch;patch=1 \
- file://18-ixp4xx-io-h-addr.patch;patch=1 \
- file://19-jffs2-force-be.patch;patch=1 \
- file://20-timer.patch;patch=1 \
- file://29-ipv4-route-c-spinlock.patch;patch=1 \
- file://30-i2c-x1205-mm1.patch;patch=1 \
- file://50-nslu2-arch.patch;patch=1 \
- file://55-nslu2-rtc.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://70-nslu2-io.patch;patch=1 \
- file://75-nslu2-leds.patch;patch=1 \
- file://80-nslu2-class-device-create.patch;patch=1 \
- file://90-pegasus.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r0.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
- file://90-ixp4xx-pci-le.patch;patch=1 \
- file://10-ixp4xx-copy-from.patch;patch=1 \
- file://10-ixp4xx-le.patch;patch=1 \
- file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
- file://15-ixp4xx-writesb-l-w.patch;patch=1 \
- file://18-ixp4xx-io-h-addr.patch;patch=1 \
- file://19-jffs2-force-be.patch;patch=1 \
- file://29-ipv4-route-c-spinlock.patch;patch=1 \
- file://30-i2c-x1205.patch;patch=1 \
- file://50-nslu2-arch.patch;patch=1 \
- file://55-nslu2-rtc.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://70-nslu2-io.patch;patch=1 \
- file://75-nslu2-leds.patch;patch=1 \
- file://90-pegasus.patch;patch=1 \
- file://20-timer.patch;patch=1 \
- file://91-maclist.patch;patch=1 \
- file://92-nslu2-maclist.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r3.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
- file://00-memory-h-page-shift.patch;patch=1 \
- file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
- file://15-jffs2-endian-config.patch;patch=1 \
- file://40-rtc-class.patch;patch=1 \
- file://40-scsi-idle.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://75-nslu2-leds.patch;patch=1 \
- file://80-nslu2-io.patch;patch=1 \
- file://85-timer.patch;patch=1 \
- file://91-maclist.patch;patch=1 \
- file://92-nslu2-maclist.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f"
git.openpandora.org / openembedded.git / commitdiff