linux-omap git: update to rc8, start adding patches from the overo tree

diff --git a/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch b/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch
new file mode 100644 (file)
index 0000000..633b1b2
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch
@@ -0,0 +1,35 @@
+From 870bb728d41c231941791bffe8783cd88cb7580a Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Sat, 29 Aug 2009 15:46:30 -0700
+Subject: [PATCH] ARM: OMAP3: Fix EHCI initialization for Beagle
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |    5 +++--
+ 1 files changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 07aee90..65934ea 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -161,7 +161,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
+ 
+       /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+       gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+-      gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
++      gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ 
+       /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+       gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+@@ -412,7 +412,8 @@ static void __init omap3_beagle_init(void)
+       gpio_direction_output(170, true);
+ 
+       usb_musb_init();
+-      usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61);
++      usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true,
++                      -EINVAL, 147);
+       omap3beagle_flash_init();
+ 
+       /* Ensure SDRC pins are mux'd for self-refresh */
+-- 
+1.6.0.4
+

diff --git a/recipes/linux/linux-omap-2.6.31/echi.patch b/recipes/linux/linux-omap-2.6.31/echi.patch
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/recipes/linux/linux-omap-2.6.31/ehci-phy-reset.patch b/recipes/linux/linux-omap-2.6.31/ehci-phy-reset.patch
new file mode 100644 (file)
index 0000000..4041c21
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.31/ehci-phy-reset.patch
@@ -0,0 +1,34 @@
+phy_reset is not getting updated from platform_data.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+ drivers/usb/host/ehci-omap.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
+index 0058f03..55e5259 100644
+--- a/drivers/usb/host/ehci-omap.c
++++ b/drivers/usb/host/ehci-omap.c
+@@ -33,7 +33,6 @@
+  *    - add suspend/resume
+  *    - move workarounds to board-files
+  *    - differentiate between ES2.x and ES3.x
+- *    - make it enumerate devices
+  */
+ 
+ #include <linux/platform_device.h>
+@@ -590,6 +589,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
+ 
+       platform_set_drvdata(pdev, omap);
+       omap->dev               = &pdev->dev;
++      omap->phy_reset         = pdata->phy_reset;
+       omap->reset_gpio_port1  = pdata->reset_gpio_port1;
+       omap->reset_gpio_port2  = pdata->reset_gpio_port2;
+       omap->phy_mode          = pdata->phy_mode;
+-- 
+1.6.2.4
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html

diff --git a/recipes/linux/linux-omap-2.6.31/overo/ehci.patch b/recipes/linux/linux-omap-2.6.31/overo/ehci.patch
new file mode 100644 (file)
index 0000000..2fec9d3
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.31/overo/ehci.patch
@@ -0,0 +1,47 @@
+From 01984da4f7009c118c18fa251b703de74f26ced2 Mon Sep 17 00:00:00 2001
+From: Steve Sakoman <steve@sakoman.com>
+Date: Sun, 16 Aug 2009 14:19:55 -0700
+Subject: [PATCH] ARM: OMAP3: Fix EHCI initialization for Overo
+
+Overo uses port 2, not port 1.  Use OVERO_GPIO_USBH_NRESET rather than hard coded value
+
+Note: this alone will not give functional EHCI.  Also required is:
+
+[PATCH 4/9] ehci: fix phy_reset init in ehci probe
+from Ajay Kumar Gupta
+---
+ arch/arm/mach-omap2/board-overo.c |   11 ++---------
+ 1 files changed, 2 insertions(+), 9 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index a9d7c2e..a220a54 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -394,7 +394,8 @@ static void __init overo_init(void)
+       omap_serial_init(&overo_uart_config);
+       overo_flash_init();
+       usb_musb_init();
+-      usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, 183, -EINVAL);
++      usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true,
++                      -EINVAL, OVERO_GPIO_USBH_NRESET);
+       overo_ads7846_init();
+       overo_init_smsc911x();
+ 
+@@ -437,14 +438,6 @@ static void __init overo_init(void)
+       else
+               printk(KERN_ERR "could not obtain gpio for "
+                                       "OVERO_GPIO_USBH_CPEN\n");
+-
+-      if ((gpio_request(OVERO_GPIO_USBH_NRESET,
+-                        "OVERO_GPIO_USBH_NRESET") == 0) &&
+-          (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
+-              gpio_export(OVERO_GPIO_USBH_NRESET, 0);
+-      else
+-              printk(KERN_ERR "could not obtain gpio for "
+-                                      "OVERO_GPIO_USBH_NRESET\n");
+ }
+ 
+ static void __init overo_map_io(void)
+-- 
+1.6.0.4
+

diff --git a/recipes/linux/linux-omap_git.bb b/recipes/linux/linux-omap_git.bb
index 731878d..2808455 100644 (file)
--- a/recipes/linux/linux-omap_git.bb
+++ b/recipes/linux/linux-omap_git.bb
@@ -8,18 +8,21 @@ COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|
 DEFAULT_PREFERENCE = "-1"
 DEFAULT_PREFERENCE_omapzoom2 = "1"
 
-SRCREV = "fd673394fa970fb82e4bc206e171c58995d0c2ba"
+SRCREV = "3777b1e9ffb6e0901be93cbe201ae8e96003179b"
 
 FILESPATHPKG_prepend = "linux-omap-2.6.31:"
 
 # The main PR is now using MACHINE_KERNEL_PR, for omap3 see conf/machine/include/omap3.inc
-PV = "2.6.30+2.6.31-rc5+gitr${SRCREV}"
+PV = "2.6.30+2.6.31-rc8+gitr${SRCREV}"
 PR = "r0"
 
 SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \
           file://defconfig"
 
 SRC_URI_append = " \
+                  file://ehci-phy-reset.patch;patch=1 \
+                  file://ehci.patch;patch=1 \
+                  file://0001-implement-TIF_RESTORE_SIGMASK-support-and-enable-the.patch;patch=1 \
 "
 
 S = "${WORKDIR}/git"