[ARM] Kirkwood: add LaCie Network Space Max v2 support

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f638ec1..cc25501 100644 (file)
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -94,6 +94,12 @@ config MACH_INETSPACE_V2
          Say 'Y' here if you want your kernel to support the
          LaCie Internet Space v2 NAS.
 
+config MACH_NETSPACE_MAX_V2
+       bool "LaCie Network Space Max v2 NAS Board"
+       help
+         Say 'Y' here if you want your kernel to support the
+         LaCie Network Space Max v2 NAS.
+
 config MACH_NET2BIG_V2
        bool "LaCie 2Big Network v2 NAS Board"
        help

diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index b7c5d5e..295d7ba 100644 (file)
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MACH_TS41X)              += ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)              += openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)         += netspace_v2-setup.o
 obj-$(CONFIG_MACH_INETSPACE_V2)                += netspace_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)     += netspace_v2-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)          += netxbig_v2-setup.o
 obj-$(CONFIG_MACH_NET5BIG_V2)          += netxbig_v2-setup.o
 obj-$(CONFIG_MACH_T5325)               += t5325-setup.o

diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index b96e43b..9f20c8d 100644 (file)
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -126,6 +126,18 @@ static void __init netspace_v2_sata_power_init(void)
        }
        if (err)
                pr_err("netspace_v2: failed to setup SATA0 power\n");
+
+       if (machine_is_netspace_max_v2()) {
+               err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
+               if (err == 0) {
+                       err = gpio_direction_output(
+                                       NETSPACE_V2_GPIO_SATA1_POWER, 1);
+                       if (err)
+                               gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
+               }
+               if (err)
+                       pr_err("netspace_v2: failed to setup SATA1 power\n");
+       }
 }
 
 /*****************************************************************************
@@ -249,6 +261,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
        MPP4_NF_IO6,
        MPP5_NF_IO7,
        MPP6_SYSRST_OUTn,
+       MPP7_GPO,               /* Fan speed (bit 1) */
        MPP8_TW0_SDA,
        MPP9_TW0_SCK,
        MPP10_UART0_TXD,
@@ -256,10 +269,13 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
        MPP12_GPO,              /* Red led */
        MPP14_GPIO,             /* USB fuse */
        MPP16_GPIO,             /* SATA 0 power */
+       MPP17_GPIO,             /* SATA 1 power */
        MPP18_NF_IO0,
        MPP19_NF_IO1,
        MPP20_SATA1_ACTn,
        MPP21_SATA0_ACTn,
+       MPP22_GPIO,             /* Fan speed (bit 0) */
+       MPP23_GPIO,             /* Fan power */
        MPP24_GPIO,             /* USB mode select */
        MPP25_GPIO,             /* Fan rotation fail */
        MPP26_GPIO,             /* USB device vbus */
@@ -268,6 +284,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
        MPP30_GPIO,             /* Blue led (command register) */
        MPP31_GPIO,             /* Board power off */
        MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
+       MPP33_GPO,              /* Fan speed (bit 2) */
        0
 };
 
@@ -332,3 +349,15 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
        .timer          = &netspace_v2_timer,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_NETSPACE_MAX_V2
+MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
+       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .init_machine   = netspace_v2_init,
+       .map_io         = kirkwood_map_io,
+       .init_irq       = kirkwood_init_irq,
+       .timer          = &netspace_v2_timer,
+MACHINE_END
+#endif