esac
fi
-if [ "$cpu" = "arm_intcm" ]
-then
+case "$cpu" in
+ arm_intcm)
echo "/* Core module undefined/not ported */" >> tmp.fil
echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
echo "initialization reg */" >> tmp.fil
echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
echo " /* CM may not have TCRAM */" >> tmp.fil
-fi
+ echo -n " /* May not be processor " >> tmp.fil
+ echo "without cache support */" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_ICACHE 1" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_DCACHE 1" >> tmp.fil
+ ;;
+
+ arm720t)
+ echo -n " /* May not be processor " >> tmp.fil
+ echo "without cache support */" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_ICACHE 1" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_DCACHE 1" >> tmp.fil
+ ;;
+esac
mkdir -p ${obj}include
mkdir -p ${obj}board/armltd/integratorap
DECLARE_GLOBAL_DATA_PTR;
#endif
-static void cp_delay (void)
-{
- volatile int i;
-
- /* Many OMAP regs need at least 2 nops */
- for (i = 0; i < 100; i++);
-}
+static void cache_flush(void);
int cpu_init (void)
{
* we turn off caches etc ...
*/
- unsigned long i;
-
disable_interrupts ();
#ifdef CONFIG_LCD
#endif
/* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(CR_C | CR_I);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
+ icache_disable();
+ dcache_disable();
/* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); /* invalidate both caches and flush btb */
- asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
- return(0);
+ cache_flush();
+
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return(0);
}
-void icache_enable (void)
+static void cache_flush(void)
{
- ulong reg;
+ unsigned long i = 0;
- reg = get_cr (); /* get control reg. */
- cp_delay ();
- set_cr (reg | CR_I);
-}
-
-void icache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_I);
-}
-
-int icache_status (void)
-{
- return(get_cr () & CR_I) != 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); /* invalidate both caches and flush btb */
+ asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
}
static void cache_flush (void);
-static void cp_delay (void)
-{
- volatile int i;
-
- /* Many OMAP regs need at least 2 nops */
- for (i = 0; i < 100; i++)
- __asm__ __volatile__("nop\n");
-}
-
int cpu_init (void)
{
return 0;
/* turn off I/D-cache */
icache_disable();
dcache_disable();
+ /* flush I/D-cache */
cache_flush();
return 0;
return 0;
}
-void icache_enable (void)
-{
- ulong reg;
-
- reg = get_cr (); /* get control reg. */
- cp_delay ();
- set_cr (reg | CR_I);
-}
-
-void icache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_I);
-}
-
-int icache_status (void)
-{
- return (get_cr () & CR_I) != 0;
-}
-
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_C);
-}
-
-void dcache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_C);
-}
-
-int dcache_status (void)
-{
- return (get_cr () & CR_C) != 0;
-}
-
/* flush I/D-cache */
static void cache_flush (void)
{
#include <asm/hardware.h>
#include <asm/system.h>
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
+static void cache_flush(void);
+#endif
+
int cpu_init (void)
{
/*
*/
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
- unsigned long i;
-
disable_interrupts ();
/* turn off I-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~0x1000;
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ icache_disable();
+ dcache_disable();
/* flush I-cache */
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+ cache_flush();
#ifdef CONFIG_ARM7_REVD
/* go to high speed */
IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
return (0);
}
-/*
- * Instruction and Data cache enable and disable functions
- *
- */
-
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
-
-void icache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_C);
-}
-
-void icache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_C);
-}
-
-int icache_status (void)
-{
- return (get_cr () & CR_C) != 0;
-}
-
-void dcache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_C);
-}
-
-void dcache_disable (void)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- ulong reg;
+ unsigned long i = 0;
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_C);
-}
-
-int dcache_status (void)
-{
- return (get_cr () & CR_C) != 0;
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
/* No specific cache setup for IntegratorAP/CM720T as yet */
DECLARE_GLOBAL_DATA_PTR;
#endif
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
+static void cache_flush(void);
int cpu_init (void)
{
* we turn off caches etc ...
*/
- unsigned long i;
-
disable_interrupts ();
/* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(CR_C | CR_I);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
+ icache_disable();
+ dcache_disable();
/* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+ cache_flush();
- return (0);
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
disable_interrupts ();
reset_cpu (0);
/*NOTREACHED*/
- return (0);
-}
-
-void icache_enable (void)
-{
- ulong reg;
-
- reg = get_cr (); /* get control reg. */
- cp_delay ();
- set_cr (reg | CR_I);
-}
-
-void icache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_I);
-}
-
-int icache_status (void)
-{
- return (get_cr () & CR_I) != 0;
-}
-
-#ifdef USE_920T_MMU
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_C);
+ return 0;
}
-void dcache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- reg &= ~CR_C;
- set_cr (reg);
-}
+ unsigned long i = 0;
-int dcache_status (void)
-{
- return (get_cr () & CR_C) != 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
}
-#endif
DECLARE_GLOBAL_DATA_PTR;
#endif
-static void cp_delay (void)
-{
- volatile int i;
-
- /* Many OMAP regs need at least 2 nops */
- for (i = 0; i < 100; i++);
-}
+static void cache_flush(void);
int cpu_init (void)
{
* we turn off caches etc ...
*/
- unsigned long i;
-
disable_interrupts ();
- /* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(CR_C | CR_I);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ /* turn off I/D-cache */
+ icache_disable();
+ dcache_disable();
/* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
- return (0);
+ cache_flush();
+
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return (0);
}
-void icache_enable (void)
-{
- ulong reg;
-
- reg = get_cr (); /* get control reg. */
- cp_delay ();
- set_cr (reg | CR_I);
-}
-
-void icache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- ulong reg;
+ unsigned long i = 0;
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_I);
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
}
-int icache_status (void)
-{
- return (get_cr () & CR_I) != 0;
-}
DECLARE_GLOBAL_DATA_PTR;
#endif
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
+static void cache_flush(void);
int cpu_init (void)
{
* we turn off caches etc ...
*/
- unsigned long i;
-
disable_interrupts ();
- /* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(CR_C | CR_I);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ /* turn off I/D-cache */
+ icache_disable();
+ dcache_disable();
/* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+ cache_flush();
- return (0);
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return (0);
}
-/* cache_bit must be either CR_I or CR_C */
-static void cache_enable(uint32_t cache_bit)
-{
- uint32_t reg;
-
- reg = get_cr(); /* get control reg. */
- cp_delay();
- set_cr(reg | cache_bit);
-}
-
-/* cache_bit must be either CR_I or CR_C */
-static void cache_disable(uint32_t cache_bit)
-{
- uint32_t reg;
-
- reg = get_cr();
- cp_delay();
- set_cr(reg & ~cache_bit);
-}
-
-void icache_enable(void)
-{
- cache_enable(CR_I);
-}
-
-void icache_disable(void)
-{
- cache_disable(CR_I);
-}
-
-int icache_status(void)
-{
- return (get_cr() & CR_I) != 0;
-}
-
-void dcache_enable(void)
-{
- cache_enable(CR_C);
-}
-
-void dcache_disable(void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- cache_disable(CR_C);
-}
+ unsigned long i = 0;
-int dcache_status(void)
-{
- return (get_cr() & CR_C) != 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
}
DECLARE_GLOBAL_DATA_PTR;
#endif
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
+static void cache_flush(void);
int cpu_init (void)
{
* we turn off caches etc ...
*/
- unsigned long i;
-
disable_interrupts ();
/* ARM926E-S needs the protection unit enabled for the icache to have
* should turn off the protection unit as well....
*/
/* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(CR_C | CR_I);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
+ icache_disable();
+ dcache_disable();
/* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
- asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
- return (0);
+ cache_flush();
+
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/*NOTREACHED*/
return (0);
}
-/* ARM926E-S needs the protection unit enabled for this to have any effect
- - left for possible later use */
-void icache_enable (void)
-{
- ulong reg;
- reg = get_cr (); /* get control reg. */
- cp_delay ();
- set_cr (reg | CR_I);
-}
-
-void icache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- ulong reg;
+ unsigned long i = 0;
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_I);
-}
-
-int icache_status (void)
-{
- return (get_cr () & CR_I) != 0;
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+ asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
}
static void cache_flush(void);
-static void cp_delay(void)
-{
- /* Many OMAP regs need at least 2 nops */
- asm("nop");
- asm("nop");
-}
-
int cpu_init(void)
{
/*
return 0;
}
-void icache_enable(void)
-{
- ulong reg;
-
- reg = get_cr(); /* get control reg. */
- cp_delay();
- set_cr(reg | CR_I);
-}
-
-void icache_disable(void)
-{
- ulong reg;
-
- reg = get_cr();
- cp_delay();
- set_cr(reg & ~CR_I);
-}
-
-void dcache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_C);
-}
-
void l2cache_enable()
{
unsigned long i;
}
}
-int icache_status(void)
-{
- return (get_cr() & CR_I) != 0;
-}
-
static void cache_flush(void)
{
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0));
/*NOTREACHED*/
return (0);
}
-
-/* May not be cahed processor on the CM - do nothing */
-void icache_enable (void)
-{
-}
-
-void icache_disable (void)
-{
-}
-
-/* return "disabled" */
-int icache_status (void)
-{
- return 0;
-}
DECLARE_GLOBAL_DATA_PTR;
#endif
+static void cache_flush(void);
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo (void)
{
* just disable everything that can disturb booting linux
*/
- unsigned long i;
-
disable_interrupts ();
/* turn off I-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~0x1000;
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ icache_disable();
+ dcache_disable();
/* flush I-cache */
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+ cache_flush();
- return (0);
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return (0);
}
-/* cache_bit must be either CR_I or CR_C */
-static void cache_enable(uint32_t cache_bit)
-{
- uint32_t reg;
-
- reg = get_cr(); /* get control reg. */
- cp_delay();
- set_cr(reg | cache_bit);
-}
-
-/* cache_bit must be either CR_I or CR_C */
-static void cache_disable(uint32_t cache_bit)
-{
- uint32_t reg;
-
- reg = get_cr();
- cp_delay();
- set_cr(reg & ~cache_bit);
-}
-
-void icache_enable(void)
-{
- cache_enable(CR_I);
-}
-
-void icache_disable(void)
-{
- cache_disable(CR_I);
-}
-
-int icache_status(void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- return (get_cr() & CR_I) != 0;
-}
+ unsigned long i = 0;
-/* we will never enable dcache, because we have to setup MMU first */
-void dcache_enable (void)
-{
- return;
-}
-
-void dcache_disable (void)
-{
- return;
-}
-
-int dcache_status (void)
-{
- return 0; /* always off */
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
/* FIXME */
DECLARE_GLOBAL_DATA_PTR;
#endif
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
+static void cache_flush(void);
int cpu_init (void)
{
* we turn off caches etc ...
*/
- unsigned long i;
-
disable_interrupts ();
/* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(CR_C | CR_I);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ icache_disable();
+ dcache_disable();
/* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
- return (0);
+ cache_flush();
+
+ return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return (0);
}
-void icache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_I);
-}
-void icache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- ulong reg;
+ unsigned long i = 0;
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_I);
-}
-
-int icache_status (void)
-{
- return (get_cr () & CR_I) != 0;
-}
-
-#ifdef USE_920T_MMU
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_C);
-}
-
-void dcache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- reg &= ~CR_C;
- set_cr (reg);
-}
-
-int dcache_status (void)
-{
- return (get_cr () & CR_C) != 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
}
-#endif
DECLARE_GLOBAL_DATA_PTR;
#endif
+static void cache_flush(void);
+
int cpu_init (void)
{
/*
* just disable everything that can disturb booting linux
*/
- unsigned long i;
-
disable_interrupts ();
/* turn off I-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~0x1000;
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ icache_disable();
+ dcache_disable();
/* flush I-cache */
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+ cache_flush();
return (0);
}
return (0);
}
-/* cache_bit must be either CR_I or CR_C */
-static void cache_enable(uint32_t cache_bit)
-{
- uint32_t reg;
-
- reg = get_cr(); /* get control reg. */
- cp_delay();
- set_cr(reg | cache_bit);
-}
-
-/* cache_bit must be either CR_I or CR_C */
-static void cache_disable(uint32_t cache_bit)
-{
- uint32_t reg;
-
- reg = get_cr();
- cp_delay();
- set_cr(reg & ~cache_bit);
-}
-
-void icache_enable(void)
-{
- cache_enable(CR_I);
-}
-
-void icache_disable(void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- cache_disable(CR_I);
-}
+ unsigned long i = 0;
-int icache_status(void)
-{
- return (get_cr() & CR_I) != 0;
-}
-
-/* we will never enable dcache, because we have to setup MMU first */
-void dcache_enable (void)
-{
- return;
-}
-
-void dcache_disable (void)
-{
- return;
-}
-
-int dcache_status (void)
-{
- return 0; /* always off */
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
#ifndef CONFIG_CPU_MONAHANS
DECLARE_GLOBAL_DATA_PTR;
#endif
+static void cache_flush(void);
+
int cpu_init (void)
{
/*
* just disable everything that can disturb booting linux
*/
- unsigned long i;
-
disable_interrupts ();
/* turn off I-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~0x1000;
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+ icache_disable();
+ dcache_disable();
/* flush I-cache */
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+ cache_flush();
return (0);
}
return (0);
}
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
-
-void icache_enable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg | CR_C);
-}
-
-void icache_disable (void)
-{
- ulong reg;
-
- reg = get_cr ();
- cp_delay ();
- set_cr (reg & ~CR_C);
-}
-
-int icache_status (void)
-{
- return (get_cr () & CR_C) != 0;
-}
-
-/* we will never enable dcache, because we have to setup MMU first */
-void dcache_enable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
{
- return;
-}
-
-void dcache_disable (void)
-{
- return;
-}
+ unsigned long i = 0;
-int dcache_status (void)
-{
- return 0; /* always off */
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
#define CONFIG_B2 1 /* on an B2 Board */
#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#define CONFIG_SYS_NO_CP15_CACHE
#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
#define CONFIG_ASSABET 1 /* on an Intel Assabet Board */
#undef CONFIG_USE_IRQ
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* for timer/console/ethernet */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Hardware drivers
*/
#undef CONFIG_SKIP_RELOCATE_UBOOT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
#define CONFIG_DNP1110 1 /* on an DNP/1110 Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
/*
* Size of malloc() pool
#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
#define CONFIG_S3C4510B 1 /* it's a S3C4510B chip */
#define CONFIG_EVB4510 1 /* on an EVB4510 Board */
+#define CONFIG_SYS_NO_CP15_CACHE
#define CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024)
#define CONFIG_GCPLUS 1 /* on an ADS GCPlus Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* for timer/console/ethernet */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Hardware drivers
*/
#define CONFIG_LART 1 /* on an LART Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
/*
* Size of malloc() pool
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* for timer/console/ethernet */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Hardware drivers
*/
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
#define CONFIG_SHANNON 1 /* on an SHANNON/TuxScreen Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
/*
* Size of malloc() pool
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
#define RTC
/*
#define CONFIG_WEPEP250 1 /* config for wepep250 board */
#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
/*
* Select serial console configuration
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* select serial console configuration
*/
#define CONFIG_XM250 1 /* on a MicroSys XM250 Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool; this lives below the uppermost 128 KiB which are
* used for the RAM copy of the uboot code
#define CONFIG_DOS_PARTITION 1
#define BOARD_LATE_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
#undef CONFIG_SKIP_RELOCATE_UBOOT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
/*
* Size of malloc() pool
*/
COBJS-y += board.o
COBJS-y += bootm.o
COBJS-y += cache.o
+ifndef CONFIG_SYS_NO_CP15_CACHE
+COBJS-y += cache-cp15.o
+endif
COBJS-y += div0.o
COBJS-y += interrupts.o
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/system.h>
+
+#if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* copro seems to need some delay between reading and writing */
+ for (i = 0; i < 100; i++)
+ nop();
+}
+
+/* cache_bit must be either CR_I or CR_C */
+static void cache_enable(uint32_t cache_bit)
+{
+ uint32_t reg;
+
+ reg = get_cr(); /* get control reg. */
+ cp_delay();
+ set_cr(reg | cache_bit);
+}
+
+/* cache_bit must be either CR_I or CR_C */
+static void cache_disable(uint32_t cache_bit)
+{
+ uint32_t reg;
+
+ reg = get_cr();
+ cp_delay();
+ set_cr(reg & ~cache_bit);
+}
+#endif
+
+#ifdef CONFIG_SYS_NO_ICACHE
+void icache_enable (void)
+{
+ return;
+}
+
+void icache_disable (void)
+{
+ return;
+}
+
+int icache_status (void)
+{
+ return 0; /* always off */
+}
+#else
+void icache_enable(void)
+{
+ cache_enable(CR_I);
+}
+
+void icache_disable(void)
+{
+ cache_disable(CR_I);
+}
+
+int icache_status(void)
+{
+ return (get_cr() & CR_I) != 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_NO_DCACHE
+void dcache_enable (void)
+{
+ return;
+}
+
+void dcache_disable (void)
+{
+ return;
+}
+
+int dcache_status (void)
+{
+ return 0; /* always off */
+}
+#else
+void dcache_enable(void)
+{
+ cache_enable(CR_C);
+}
+
+void dcache_disable(void)
+{
+ cache_disable(CR_C);
+}
+
+int dcache_status(void)
+{
+ return (get_cr() & CR_C) != 0;
+}
+#endif
git.openpandora.org / pandora-u-boot.git / commitdiff