keystone: init: enable UART1 to be able use it from kernel

Currently PWREMU_MGMT is not configured in the Linux generic UART
driver as this register seems to be specific TI UART IP. So this
needs to be enabled in u-boot to use UART1 from kernel space.

Acked-By: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>

diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 044015a..4df5ae1 100644 (file)
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <ns16550.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/hardware.h>
@@ -30,6 +31,14 @@ int arch_cpu_init(void)
        share_all_segments(11); /* PCIE */
 #endif
 
+       /*
+        * just initialise the COM2 port so that TI specific
+        * UART register PWREMU_MGMT is initialized. Linux UART
+        * driver doesn't handle this.
+        */
+       NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
+                    CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
        return 0;
 }
 

diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 50ff13a..7ac2662 100644 (file)
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -115,8 +115,6 @@
 #define K2HK_LPSC_ARM_SREFLEX          51
 #define K2HK_LPSC_TETRIS               52
 
-#define K2HK_UART0_BASE                0x02530c00
-
 /* DDR3A definitions */
 #define K2HK_DDR3A_EMIF_CTRL_BASE      0x21010000
 #define K2HK_DDR3A_EMIF_DATA_BASE      0x80000000

diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index a305a0c..6c532ca 100644 (file)
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -142,6 +142,9 @@ struct ddr3_emif_config {
 #define KS2_DDR3_PMCTL_OFFSET           0x38
 #define KS2_DDR3_ZQCFG_OFFSET           0xC8
 
+#define KS2_UART0_BASE                 0x02530c00
+#define KS2_UART1_BASE                 0x02531000
+
 #ifdef CONFIG_SOC_K2HK
 #include <asm/arch/hardware-k2hk.h>
 #endif

diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index dde7329..998390e 100644 (file)
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -71,7 +71,8 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_MEM32
 #define CONFIG_SYS_NS16550_REG_SIZE     -4
-#define CONFIG_SYS_NS16550_COM1         K2HK_UART0_BASE
+#define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
 #define CONFIG_SYS_NS16550_CLK          clk_get_rate(K2HK_CLK1_6)
 #define CONFIG_CONS_INDEX               1
 #define CONFIG_BAUDRATE                 115200