u-boot-1.3.2: prune obsolete patches for boc01

diff --git a/packages/u-boot/u-boot-1.3.2/boc01/001-090115-SPI.patch b/packages/u-boot/u-boot-1.3.2/boc01/001-090115-SPI.patch
deleted file mode 100644 (file)
index 96b624b..0000000
--- a/packages/u-boot/u-boot-1.3.2/boc01/001-090115-SPI.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-Index: u-boot-1.3.2/board/freescale/mpc8313erdb/mpc8313erdb.c
-===================================================================
---- u-boot-1.3.2.orig/board/freescale/mpc8313erdb/mpc8313erdb.c        2009-01-15 10:51:45.000000000 +0100
-+++ u-boot-1.3.2/board/freescale/mpc8313erdb/mpc8313erdb.c     2009-01-15 12:18:31.000000000 +0100
-@@ -28,6 +28,7 @@
- #endif
- #include <pci.h>
- #include <mpc83xx.h>
-+#include <spi.h>
- 
- DECLARE_GLOBAL_DATA_PTR;
- 
-@@ -107,3 +108,29 @@
- #endif
- }
- #endif
-+
-+
-+/*
-+ * The following are used to control the SPI chip selects for the SPI command.
-+ */
-+#ifdef CONFIG_HARD_SPI
-+
-+void spi_rfid_chipsel(int cs)
-+{
-+      if(cs)
-+              gpio_clear(14);
-+      else
-+              gpio_set(14);
-+}
-+
-+/*
-+ * The SPI command uses this table of functions for controlling the SPI
-+ * chip selects.
-+ */
-+spi_chipsel_type spi_chipsel[] = {
-+              spi_rfid_chipsel,
-+};
-+int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-+
-+#endif /* CONFIG_HARD_SPI */
-+
-Index: u-boot-1.3.2/include/configs/MPC8313ERDB.h
-===================================================================
---- u-boot-1.3.2.orig/include/configs/MPC8313ERDB.h    2009-01-15 10:51:51.000000000 +0100
-+++ u-boot-1.3.2/include/configs/MPC8313ERDB.h 2009-01-15 12:16:57.000000000 +0100
-@@ -369,6 +369,7 @@
- #define CONFIG_CMD_PCI
- #define CONFIG_CMD_NAND
- #define CONFIG_CMD_JFFS2
-+#define CONFIG_CMD_SPI
- 
- #if defined(CFG_RAMBOOT)
-     #undef CONFIG_CMD_ENV
-@@ -386,6 +387,11 @@
- #define MTDPARTS_DEFAULT      "mtdparts=physmap-flash.0:384k(uboot),64k(env)"
- 
- 
-+/* SPI */
-+#define CONFIG_MPC8XXX_SPI
-+#define CONFIG_HARD_SPI                       /* SPI with hardware support */
-+#undef CONFIG_SOFT_SPI                        /* SPI bit-banged */
-+
- /*
-  * Miscellaneous configurable options
-  */
-Index: u-boot-1.3.2/drivers/spi/mpc8xxx_spi.c
-===================================================================
---- u-boot-1.3.2.orig/drivers/spi/mpc8xxx_spi.c        2009-01-15 10:52:30.000000000 +0100
-+++ u-boot-1.3.2/drivers/spi/mpc8xxx_spi.c     2009-01-15 10:53:23.000000000 +0100
-@@ -34,6 +34,8 @@
- #define SPI_MODE_REV  (0x80000000 >> 5)       /* Reverse mode - MSB first */
- #define SPI_MODE_MS   (0x80000000 >> 6)       /* Always master */
- #define SPI_MODE_EN   (0x80000000 >> 7)       /* Enable interface */
-+#define SPI_MODE_DIV16        (0x80000000 >> 4)       /*Divide by 16.   */
-+#define SPI_MODE_LEN_8        (0x00700000)            /*0111 8-bit characters*/
- 
- #define SPI_TIMEOUT   1000
- 
-@@ -45,9 +47,7 @@
-        * SPI pins on the MPC83xx are not muxed, so all we do is initialize
-        * some registers
-        */
--      spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
--      spi->mode = (spi->mode & 0xfff0ffff) | (1 << 16); /* Use SYSCLK / 8
--                                                           (16.67MHz typ.) */
-+      spi->mode = SPI_MODE_DIV16 |SPI_MODE_LEN_8| SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
-       spi->event = 0xffffffff;        /* Clear all SPI events */
-       spi->mask = 0x00000000; /* Mask  all SPI interrupts */
-       spi->com = 0;           /* LST bit doesn't do anything, so disregard */

diff --git a/packages/u-boot/u-boot-1.3.2/boc01/013-081211-FIX_OOB_8BITS_LARGEPAGE_NAND.patch b/packages/u-boot/u-boot-1.3.2/boc01/013-081211-FIX_OOB_8BITS_LARGEPAGE_NAND.patch
deleted file mode 100644 (file)
index 911dd29..0000000
--- a/packages/u-boot/u-boot-1.3.2/boc01/013-081211-FIX_OOB_8BITS_LARGEPAGE_NAND.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Index: u-boot-1.3.2/drivers/mtd/nand/nand_bbt.c
-===================================================================
---- u-boot-1.3.2.orig/drivers/mtd/nand/nand_bbt.c      2008-12-11 10:15:52.000000000 +0100
-+++ u-boot-1.3.2/drivers/mtd/nand/nand_bbt.c   2008-12-11 10:16:39.000000000 +0100
-@@ -914,10 +914,11 @@
-       .pattern = scan_ff_pattern
- };
- 
-+//Samsung makes sure that either the 1st or 2nd page of every initial invalid block has non-FFh data at the column address of 2048.
- static struct nand_bbt_descr largepage_memorybased = {
-       .options = 0,
-       .offs = 0,
--      .len = 2,
-+      .len = 1,
-       .pattern = scan_ff_pattern
- };
-