Kconfigs: Correct default of "0" on hex type entries

It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0".  However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 3e292bf..46ace7e 100644 (file)
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -98,7 +98,6 @@ config SYS_FSL_ERRATUM_A008407
 
 config SYS_FSL_QSPI_SKIP_CLKSEL
        bool "Skip setting QSPI clock during SoC init"
-       default 0
        help
           To improve startup times when booting from QSPI flash, the QSPI
           frequency can be set very early in the boot process. If this option

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index a8b493e..d46934c 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -739,7 +739,7 @@ config HAS_FSL_XHCI_USB
 config SYS_FSL_BOOTROM_BASE
        hex
        depends on FSL_LSCH2
-       default 0
+       default 0x0
 
 config SYS_FSL_BOOTROM_SIZE
        hex

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index d94b582..2136ab7 100644 (file)
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -181,7 +181,7 @@ config IMX8_ROMAPI
 config SPL_IMX_ROMAPI_LOADADDR
        hex "Default load address to load image through ROM API"
        depends on IMX8_ROMAPI || SPL_BOOTROM_SUPPORT
-       default 0
+       default 0x0
 
 config IMX_DCD_ADDR
        hex "DCD Blocks location on the image"

diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 15f844f..59d11b3 100644 (file)
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -34,11 +34,11 @@ config SYS_SOC
 
 config BOOTAUX_RESERVED_MEM_BASE
        hex "i.MX auxiliary core dram memory base"
-       default 0
+       default 0x0
 
 config BOOTAUX_RESERVED_MEM_SIZE
        hex "i.MX auxiliary core dram memory size"
-       default 0
+       default 0x0
 
 choice
        prompt "i.MX8 board select"

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 49da93d..4569a9c 100644 (file)
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -469,7 +469,7 @@ config ROCKCHIP_STIMER_BASE
 
 config ROCKCHIP_SPL_RESERVE_IRAM
        hex "Size of IRAM reserved in SPL"
-       default 0
+       default 0x0
        help
          SPL may need reserve memory for firmware loaded by SPL, whose load
          address is in IRAM and may overlay with SPL text area if not

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index e20c3a3..9d5df2c 100644 (file)
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -568,7 +568,7 @@ config DRAM_EMR1
 
 config DRAM_TPR3
        hex "sunxi dram tpr3 value"
-       default 0
+       default 0x0
        ---help---
        Set the dram controller tpr3 parameter. This parameter configures
        the delay on the command lane and also phase shifts, which are
@@ -579,7 +579,7 @@ config DRAM_TPR3
 
 config DRAM_DQS_GATING_DELAY
        hex "sunxi dram dqs_gating_delay value"
-       default 0
+       default 0x0
        ---help---
        Set the dram controller dqs_gating_delay parmeter. Each byte
        encodes the DQS gating delay for each byte lane. The delay

diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index bd2af8d..1731c96 100644 (file)
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -94,7 +94,7 @@ config SYS_SIUMCR
 
 config SYS_SYPCR
        hex "SYPCR register" if !WDT_MPC8xxx
-       default 0
+       default 0x0
        help
          System Protection Control (11-9)
 

diff --git a/boot/Kconfig b/boot/Kconfig
index e8fb03b..b00d7a8 100644 (file)
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -1007,7 +1007,7 @@ config BOOTSTAGE_STASH
 
 config BOOTSTAGE_STASH_ADDR
        hex "Address to stash boot timing information"
-       default 0
+       default 0x0
        help
          Provide an address which will not be overwritten by the OS when it
          starts, so that it can read this information when ready.

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 7f65e31..8ab47b3 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -517,7 +517,7 @@ config CMD_SPL
 config CMD_SPL_NAND_OFS
        hex "Offset of OS args or dtb for Falcon-mode NAND boot"
        depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT)
-       default 0
+       default 0x0
        help
          This provides the offset of the command line arguments for Linux
          when booting from NAND in Falcon mode.  See doc/README.falcon
@@ -527,7 +527,7 @@ config CMD_SPL_NAND_OFS
 config CMD_SPL_NOR_OFS
        hex "Offset of OS args or dtb for Falcon-mode NOR boot"
        depends on CMD_SPL && SPL_NOR_SUPPORT
-       default 0
+       default 0x0
        help
          This provides the offset of the command line arguments or dtb for
          Linux when booting from NOR in Falcon mode.
@@ -1514,7 +1514,7 @@ config DEFAULT_SPI_BUS
 config DEFAULT_SPI_MODE
        hex "default spi mode used by sspi command (see include/spi.h)"
        depends on CMD_SPI
-       default 0
+       default 0x0
 
 config CMD_TEMPERATURE
        bool "temperature - display the temperature from thermal sensors"
@@ -1805,7 +1805,7 @@ config BOOTP_PXE_CLIENTARCH
        depends on BOOTP_PXE
        default 0x16 if ARM64
        default 0x15 if ARM
-       default 0 if X86
+       default 0x0 if X86
 
 config BOOTP_VCI_STRING
        string

diff --git a/common/Kconfig b/common/Kconfig
index cdb77a6..0b09bd6 100644 (file)
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1031,7 +1031,7 @@ config BLOBLIST_SIZE
 config BLOBLIST_SIZE_RELOC
        hex "Size of bloblist after relocation"
        default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC
-       default 0 if BLOBLIST_PASSAGE
+       default 0x0 if BLOBLIST_PASSAGE
        help
          Sets the size of the bloblist in bytes after relocation. Since U-Boot
          has a lot more memory available then, it is possible to use a larger

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c5dd476..1c2fe78 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -67,7 +67,7 @@ config SPL_SIZE_LIMIT_SUBTRACT_MALLOC
 config SPL_SIZE_LIMIT_PROVIDE_STACK
        hex "SPL image size check: provide stack space before relocation"
        depends on SPL_SIZE_LIMIT > 0
-       default 0
+       default 0x0
        help
          If set, this size is reserved in SPL_SIZE_LIMIT check to ensure such
          an image does not overflow SRAM if SPL_SIZE_LIMIT describes the size

diff --git a/common/spl/Kconfig.tpl b/common/spl/Kconfig.tpl
index 3d6cf1e..cc71578 100644 (file)
--- a/common/spl/Kconfig.tpl
+++ b/common/spl/Kconfig.tpl
@@ -126,7 +126,7 @@ config TPL_POWER
 
 config TPL_TEXT_BASE
        hex "Base address for the .text section of the TPL stage"
-       default 0
+       default 0x0
        help
          The base address for the .text section of the TPL stage.
 

diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index a485cc6..7c4085d 100644 (file)
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -17,7 +17,6 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_ENV_OFFSET_REDUND=0x540000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SYS_MEMTEST_START=0x80000000

diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig
index 50975db..1bfc01f 100644 (file)
--- a/configs/efi-x86_app32_defconfig
+++ b/configs/efi-x86_app32_defconfig
@@ -2,7 +2,7 @@ CONFIG_X86=y
 CONFIG_NR_DRAM_BANKS=8
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app"
-CONFIG_DEBUG_UART_BASE=0
+CONFIG_DEBUG_UART_BASE=0x0
 CONFIG_DEBUG_UART_CLOCK=0
 CONFIG_VENDOR_EFI=y
 CONFIG_TARGET_EFI_APP32=y

diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig
index 0fc358d..46a1900 100644 (file)
--- a/configs/efi-x86_app64_defconfig
+++ b/configs/efi-x86_app64_defconfig
@@ -2,7 +2,7 @@ CONFIG_X86=y
 CONFIG_NR_DRAM_BANKS=8
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app"
-CONFIG_DEBUG_UART_BASE=0
+CONFIG_DEBUG_UART_BASE=0x0
 CONFIG_DEBUG_UART_CLOCK=0
 CONFIG_X86_RUN_64BIT=y
 CONFIG_VENDOR_EFI=y

diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig
index c1e7f39..7469f3f 100644 (file)
--- a/configs/evb-rk3229_defconfig
+++ b/configs/evb-rk3229_defconfig
@@ -12,7 +12,6 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3229-evb"
 CONFIG_SPL_TEXT_BASE=0x60000000
 CONFIG_ROCKCHIP_RK322X=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
 CONFIG_TARGET_EVB_RK3229=y
 CONFIG_SPL_STACK_R_ADDR=0x60600000
 CONFIG_DEBUG_UART_BASE=0x11030000

diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig
index a13a809..d1e7858 100644 (file)
--- a/configs/evb-rk3308_defconfig
+++ b/configs/evb-rk3308_defconfig
@@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_TARGET_EVB_RK3308=y
 CONFIG_SPL_STACK_R_ADDR=0xc00000

diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
index 2814e2c..74733c4 100644 (file)
--- a/configs/imx6q_logic_defconfig
+++ b/configs/imx6q_logic_defconfig
@@ -86,7 +86,6 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y

diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index f63eb4f..e2bca40 100644 (file)
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -233,6 +233,5 @@ CONFIG_USB_GADGET_MANUFACTURER="Data Modul"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_USB_FUNCTION_ACM=y
 CONFIG_IMX_WATCHDOG=y

diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig
index fab3ab1..975fcc2 100644 (file)
--- a/configs/imx8mn_beacon_2g_defconfig
+++ b/configs/imx8mn_beacon_2g_defconfig
@@ -142,4 +142,3 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
-CONFIG_SDP_LOADADDR=0x0

diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig
index f810d4b..f4ecdc8 100644 (file)
--- a/configs/imx8mn_beacon_defconfig
+++ b/configs/imx8mn_beacon_defconfig
@@ -149,5 +149,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_IMX_WATCHDOG=y

diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig
index 8705d9b..f5e57fb 100644 (file)
--- a/configs/imx8mn_beacon_fspi_defconfig
+++ b/configs/imx8mn_beacon_fspi_defconfig
@@ -149,7 +149,6 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_IMX_WATCHDOG=y
 CONFIG_FSPI_CONF_HEADER=y
 CONFIG_FSPI_CONF_FILE="fspi_header.bin"

diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig
index 2570eb6..c6a3e35 100644 (file)
--- a/configs/imx8mp_beacon_defconfig
+++ b/configs/imx8mp_beacon_defconfig
@@ -172,7 +172,6 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
 CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_USB_FUNCTION_ACM=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y

diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig
index 2ff577f..d3b629c 100644 (file)
--- a/configs/imx8mp_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mp_data_modul_edm_sbc_defconfig
@@ -257,7 +257,6 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Data Modul"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_USB_FUNCTION_ACM=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y

diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
index 14ac499..24c87aa 100644 (file)
--- a/configs/imx8mp_dhcom_pdk2_defconfig
+++ b/configs/imx8mp_dhcom_pdk2_defconfig
@@ -255,7 +255,6 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_USB_FUNCTION_ACM=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y

diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig
index 3b26f31..3e89e0f 100644 (file)
--- a/configs/imx8mp_dhcom_pdk3_defconfig
+++ b/configs/imx8mp_dhcom_pdk3_defconfig
@@ -258,7 +258,6 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_SDP_LOADADDR=0x0
 CONFIG_USB_FUNCTION_ACM=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y

diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index 8fe2798..21a3979 100644 (file)
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -20,7 +20,6 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x18009ff0
 CONFIG_SPL_SIZE_LIMIT=0x20000
-CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f0000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -130,7 +129,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_WDT=y
 CONFIG_WDT_SL28CPLD=y
 CONFIG_WDT_SP805=y
-CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
 CONFIG_EFI_SET_TIME=y
 CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
 CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y

diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig
index 7c55b3b..9c29eb6 100644 (file)
--- a/configs/lion-rk3368_defconfig
+++ b/configs/lion-rk3368_defconfig
@@ -10,7 +10,6 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou"
 CONFIG_SPL_TEXT_BASE=0x00000000
 CONFIG_ROCKCHIP_RK3368=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC=y

diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig
index 9a789b2..3f3c223 100644 (file)
--- a/configs/roc-cc-rk3308_defconfig
+++ b/configs/roc-cc-rk3308_defconfig
@@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_DEFAULT_DEVICE_TREE="rk3308-roc-cc"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_TARGET_ROC_RK3308_CC=y
 CONFIG_SPL_STACK_R_ADDR=0xc00000

diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig
index cc3274a..8c13f7f 100644 (file)
--- a/configs/rock-pi-s-rk3308_defconfig
+++ b/configs/rock-pi-s-rk3308_defconfig
@@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_DEFAULT_DEVICE_TREE="rk3308-rock-pi-s"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_TARGET_EVB_RK3308=y
 CONFIG_SPL_STACK_R_ADDR=0xc00000

diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index bf3ef0c..0e079d7 100644 (file)
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="sandbox64"
 CONFIG_DM_RESET=y
 CONFIG_PRE_CON_BUF_ADDR=0x100000
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 CONFIG_SANDBOX64=y

diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index ea2b256..f031b50 100644 (file)
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
 CONFIG_DM_RESET=y
 CONFIG_PRE_CON_BUF_ADDR=0xf0000
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y

diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index 8aa2956..c20015d 100644 (file)
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -3,7 +3,6 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
 CONFIG_DM_RESET=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y

diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig
index 2c6aab6..f6e3519 100644 (file)
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@@ -10,7 +10,6 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 CONFIG_SANDBOX_SPL=y

diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 8d50162..7e6ee93 100644 (file)
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -10,7 +10,6 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 CONFIG_SANDBOX_SPL=y

diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig
index f3a0fd1..9ac800a 100644 (file)
--- a/configs/sandbox_vpl_defconfig
+++ b/configs/sandbox_vpl_defconfig
@@ -15,7 +15,6 @@ CONFIG_TPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL=y
-CONFIG_BOOTSTAGE_STASH_ADDR=0x0
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 CONFIG_SANDBOX_SPL=y

diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 97904bd..54ba0b7 100644 (file)
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -77,7 +77,6 @@ CONFIG_DM_MAILBOX=y
 CONFIG_ZYNQMP_IPI=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index acab38f..2626084 100644 (file)
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -11,7 +11,6 @@ CONFIG_DM_RESET=y
 CONFIG_SPL_STACK_R_ADDR=0x18000000
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_SIZE_LIMIT=0x2a000
-CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x1E80000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 6baaa6f..1abea3f 100644 (file)
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -167,7 +167,7 @@ config SYS_IDE_MAXDEVICE
 
 config SYS_ATA_BASE_ADDR
        hex "Base address of IDE controller"
-       default 0
+       default 0x0
        help
          This is the address of the IDE controller, from which other addresses
          are calculated. Each bus is at a fixed offset from this address,

diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index a3df9aa..837c6f1 100644 (file)
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -56,7 +56,7 @@ config FASTBOOT_BUF_ADDR
                                ROCKCHIP_RK3399
        default 0x280000 if ROCKCHIP_RK3368
        default 0x100000 if ARCH_ZYNQMP
-       default 0 if SANDBOX
+       default 0x0 if SANDBOX
        help
          The fastboot protocol requires a large memory buffer for
          downloads. Define this to the starting RAM address to use for

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 4c76fd7..4f42200 100644 (file)
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -372,7 +372,7 @@ config SYS_MXC_I2C1_SPEED
 
 config SYS_MXC_I2C1_SLAVE
        hex "I2C1 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C1 Slave
 endif
@@ -387,7 +387,7 @@ config SYS_MXC_I2C2_SPEED
 
 config SYS_MXC_I2C2_SLAVE
        hex "I2C2 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C2 Slave
 endif
@@ -401,7 +401,7 @@ config SYS_MXC_I2C3_SPEED
 
 config SYS_MXC_I2C3_SLAVE
        hex "I2C3 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C3 Slave
 endif
@@ -415,7 +415,7 @@ config SYS_MXC_I2C4_SPEED
 
 config SYS_MXC_I2C4_SLAVE
        hex "I2C4 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C4 Slave
 endif
@@ -429,7 +429,7 @@ config SYS_MXC_I2C5_SPEED
 
 config SYS_MXC_I2C5_SLAVE
        hex "I2C5 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C5 Slave
 endif
@@ -443,7 +443,7 @@ config SYS_MXC_I2C6_SPEED
 
 config SYS_MXC_I2C6_SLAVE
        hex "I2C6 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C6 Slave
 endif
@@ -457,7 +457,7 @@ config SYS_MXC_I2C7_SPEED
 
 config SYS_MXC_I2C7_SLAVE
        hex "I2C7 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C7 Slave
 endif
@@ -471,7 +471,7 @@ config SYS_MXC_I2C8_SPEED
 
 config SYS_MXC_I2C8_SLAVE
        hex "I2C8 Slave"
-       default 0
+       default 0x0
        help
         MXC I2C8 Slave
 endif

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b9f5c7a..a6e3f62 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -555,7 +555,7 @@ config SPL_I2C_EEPROM
 config SYS_I2C_EEPROM_ADDR
        hex "Chip address of the EEPROM device"
        depends on ID_EEPROM || I2C_EEPROM || SPL_I2C_EEPROM || CMD_EEPROM || ENV_IS_IN_EEPROM
-       default 0
+       default 0x0
 
 if I2C_EEPROM
 

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a1e0899..7ca42df 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -482,8 +482,8 @@ endchoice
 config DEBUG_UART_BASE
        hex "Base address of UART"
        depends on DEBUG_UART
-       default 0 if DEBUG_SBI_CONSOLE
-       default 0 if DEBUG_UART_SANDBOX
+       default 0x0 if DEBUG_SBI_CONSOLE
+       default 0x0 if DEBUG_UART_SANDBOX
        default 0xff000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP
        default 0xe0000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ
        help
@@ -1139,6 +1139,6 @@ config SYS_SDSR
 config SYS_SDMR
        hex "SDMR Value"
        depends on MPC8XX_CONS
-       default 0
+       default 0x0
 
 endif

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 1cfe602..4eccc5e 100644 (file)
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -160,7 +160,7 @@ config USB_GADGET_VBUS_DRAW
 
 config SDP_LOADADDR
        hex "Default load address at SDP_WRITE and SDP_JUMP"
-       default 0
+       default 0x0
 
 # Selected by UDC drivers that support high-speed operation.
 config USB_GADGET_DUALSPEED

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e32ce13..fe43fbd 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -66,7 +66,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE
        hex "Default framebuffer size to use if no drivers request it"
        default 0x1000000 if X86
        default 0x800000 if !X86 && VIDEO_BOCHS
-       default 0 if !X86 && !VIDEO_BOCHS
+       default 0x0 if !X86 && !VIDEO_BOCHS
        help
          Generally, video drivers request the amount of memory they need for
          the frame buffer when they are bound, by setting the size field in
@@ -1039,7 +1039,7 @@ config SPL_VIDEO_PCI_DEFAULT_FB_SIZE
        hex "Default framebuffer size to use if no drivers request it at SPL"
        default 0x1000000 if X86
        default 0x800000 if !X86 && VIDEO_BOCHS
-       default 0 if !X86 && !VIDEO_BOCHS
+       default 0x0 if !X86 && !VIDEO_BOCHS
        help
          Generally, video drivers request the amount of memory they need for
          the frame buffer when they are bound, by setting the size field in

diff --git a/env/Kconfig b/env/Kconfig
index 13e3210..54203fa 100644 (file)
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -571,7 +571,7 @@ config ENV_OFFSET
        default 0xE0000 if ARCH_ZYNQ
        default 0x1E00000 if ARCH_ZYNQMP
        default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET
-       default 0 if ARC
+       default 0x0 if ARC
        default 0x140000 if ARCH_AT91
        default 0x260000 if ARCH_OMAP2PLUS
        default 0x1080000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH
@@ -583,7 +583,7 @@ config ENV_OFFSET_REDUND
        depends on (ENV_IS_IN_EEPROM || ENV_IS_IN_MMC || ENV_IS_IN_NAND || \
                    ENV_IS_IN_SPI_FLASH) && SYS_REDUNDAND_ENVIRONMENT
        default 0x10C0000 if MICROBLAZE
-       default 0
+       default 0x0
        help
          Offset from the start of the device (or partition) of the redundant
          environment location.

diff --git a/lib/Kconfig b/lib/Kconfig
index 07e61de..42e559a 100644 (file)
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -862,7 +862,7 @@ config OF_LIBFDT
 config OF_LIBFDT_ASSUME_MASK
        hex "Mask of conditions to assume for libfdt"
        depends on OF_LIBFDT || FIT
-       default 0
+       default 0x0
        help
          Use this to change the assumptions made by libfdt about the
          device tree it is working with. A value of 0 means that no assumptions