+++ /dev/null
-#! /bin/sh
-# -*- coding: utf-8 -*-
-# Debian init.d script for D-BUS
-# Copyright © 2003 Colin Walters <walters@debian.org>
-# Copyright 2008 OE Team
-
-set -e
-
-DAEMON=/usr/bin/dbus-daemon
-NAME=dbus
-DAEMONUSER=messagebus
-RUNDIR=/var/run/dbus
-PIDFILE=/var/run/dbus/pid
-UUIDDIR=/var/lib/dbus
-DESC="system message bus"
-EVENTDIR=/etc/dbus-1/event.d
-
-test -x $DAEMON || exit 0
-
-# Source defaults file; edit that file to configure this script.
-ENABLED=1
-PARAMS=""
-if [ -e /etc/default/dbus ]; then
- . /etc/default/dbus
-fi
-
-test "$ENABLED" != "0" || exit 0
-
-start_it_up()
-{
- if [ ! -d $RUNDIR ]; then
- mkdir -p $RUNDIR
- chown $DAEMONUSER $RUNDIR
- chgrp $DAEMONUSER $RUNDIR
- fi
- if [ -e $PIDFILE ]; then
- PIDDIR=/proc/$(cat $PIDFILE)
- if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
- echo "$DESC already started; not starting."
- else
- echo "Removing stale PID file $PIDFILE."
- rm -f $PIDFILE
- fi
- fi
-
- if [ ! -d $UUIDDIR ]; then
- mkdir -p $UUIDDIR
- chown $DAEMONUSER $UUIDDIR
- chgrp $DAEMONUSER $UUIDDIR
- fi
-
- dbus-uuidgen --ensure
-
- echo -n "Starting $DESC: "
- start-stop-daemon --start --pidfile $PIDFILE \
- --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- if [ -d $EVENTDIR ]; then
- run-parts --arg=start $EVENTDIR
- fi
-}
-
-shut_it_down()
-{
- if [ -d $EVENTDIR ]; then
- # TODO: --reverse when busybox supports it
- run-parts --arg=stop $EVENTDIR
- fi
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --oknodo --pidfile $PIDFILE \
- --user $DAEMONUSER
- # We no longer include these arguments so that start-stop-daemon
- # can do its job even given that we may have been upgraded.
- # We rely on the pidfile being sanely managed
- # --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- rm -f $PIDFILE
-}
-
-reload_it()
-{
- echo -n "Reloading $DESC config: "
- dbus-send --print-reply --system --type=method_call \
- --dest=org.freedesktop.DBus \
- / org.freedesktop.DBus.ReloadConfig > /dev/null
- # hopefully this is enough time for dbus to reload it's config file.
- echo "done."
-}
-
-case "$1" in
- start)
- start_it_up
- ;;
- stop)
- shut_it_down
- ;;
- reload|force-reload)
- reload_it
- ;;
- restart)
- shut_it_down
- sleep 1
- start_it_up
- ;;
- *)
- echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
-+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
-@@ -1047,15 +1048,18 @@
- AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
-
- #### Find socket directories
--if ! test -z "$TMPDIR" ; then
-- DEFAULT_SOCKET_DIR=$TMPDIR
--elif ! test -z "$TEMP" ; then
-- DEFAULT_SOCKET_DIR=$TEMP
--elif ! test -z "$TMP" ; then
-- DEFAULT_SOCKET_DIR=$TMP
--else
-- DEFAULT_SOCKET_DIR=/tmp
--fi
-+#if ! test -z "$TMPDIR" ; then
-+# DEFAULT_SOCKET_DIR=$TMPDIR
-+#elif ! test -z "$TEMP" ; then
-+# DEFAULT_SOCKET_DIR=$TEMP
-+#elif ! test -z "$TMP" ; then
-+# DEFAULT_SOCKET_DIR=$TMP
-+#else
-+# DEFAULT_SOCKET_DIR=/tmp
-+#fi
-+
-+# checks disabled to avoid expanding this at build time
-+DEFAULT_SOCKET_DIR=/tmp
-
- if ! test -z "$with_test_socket_dir" ; then
- TEST_SOCKET_DIR="$with_test_socket_dir"
+++ /dev/null
-#! /bin/sh
-# -*- coding: utf-8 -*-
-# Debian init.d script for D-BUS
-# Copyright © 2003 Colin Walters <walters@debian.org>
-# Copyright 2008 OE Team
-
-set -e
-
-DAEMON=/usr/bin/dbus-daemon
-NAME=dbus
-DAEMONUSER=messagebus
-RUNDIR=/var/run/dbus
-PIDFILE=/var/run/dbus/pid
-UUIDDIR=/var/lib/dbus
-DESC="system message bus"
-EVENTDIR=/etc/dbus-1/event.d
-
-test -x $DAEMON || exit 0
-
-# Source defaults file; edit that file to configure this script.
-ENABLED=1
-PARAMS=""
-if [ -e /etc/default/dbus ]; then
- . /etc/default/dbus
-fi
-
-test "$ENABLED" != "0" || exit 0
-
-start_it_up()
-{
- if [ ! -d $RUNDIR ]; then
- mkdir -p $RUNDIR
- chown $DAEMONUSER $RUNDIR
- chgrp $DAEMONUSER $RUNDIR
- fi
- if [ -e $PIDFILE ]; then
- PIDDIR=/proc/$(cat $PIDFILE)
- if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
- echo "$DESC already started; not starting."
- else
- echo "Removing stale PID file $PIDFILE."
- rm -f $PIDFILE
- fi
- fi
-
- if [ ! -d $UUIDDIR ]; then
- mkdir -p $UUIDDIR
- chown $DAEMONUSER $UUIDDIR
- chgrp $DAEMONUSER $UUIDDIR
- fi
-
- dbus-uuidgen --ensure
-
- echo -n "Starting $DESC: "
- start-stop-daemon --start --pidfile $PIDFILE \
- --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- if [ -d $EVENTDIR ]; then
- run-parts --arg=start $EVENTDIR
- fi
-}
-
-shut_it_down()
-{
- if [ -d $EVENTDIR ]; then
- # TODO: --reverse when busybox supports it
- run-parts --arg=stop $EVENTDIR
- fi
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --oknodo --pidfile $PIDFILE \
- --user $DAEMONUSER
- # We no longer include these arguments so that start-stop-daemon
- # can do its job even given that we may have been upgraded.
- # We rely on the pidfile being sanely managed
- # --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- rm -f $PIDFILE
-}
-
-reload_it()
-{
- echo -n "Reloading $DESC config: "
- dbus-send --print-reply --system --type=method_call \
- --dest=org.freedesktop.DBus \
- / org.freedesktop.DBus.ReloadConfig > /dev/null
- # hopefully this is enough time for dbus to reload it's config file.
- echo "done."
-}
-
-case "$1" in
- start)
- start_it_up
- ;;
- stop)
- shut_it_down
- ;;
- reload|force-reload)
- reload_it
- ;;
- restart)
- shut_it_down
- sleep 1
- start_it_up
- ;;
- *)
- echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
-+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
-@@ -1047,15 +1048,18 @@
- AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
-
- #### Find socket directories
--if ! test -z "$TMPDIR" ; then
-- DEFAULT_SOCKET_DIR=$TMPDIR
--elif ! test -z "$TEMP" ; then
-- DEFAULT_SOCKET_DIR=$TEMP
--elif ! test -z "$TMP" ; then
-- DEFAULT_SOCKET_DIR=$TMP
--else
-- DEFAULT_SOCKET_DIR=/tmp
--fi
-+#if ! test -z "$TMPDIR" ; then
-+# DEFAULT_SOCKET_DIR=$TMPDIR
-+#elif ! test -z "$TEMP" ; then
-+# DEFAULT_SOCKET_DIR=$TEMP
-+#elif ! test -z "$TMP" ; then
-+# DEFAULT_SOCKET_DIR=$TMP
-+#else
-+# DEFAULT_SOCKET_DIR=/tmp
-+#fi
-+
-+# checks disabled to avoid expanding this at build time
-+DEFAULT_SOCKET_DIR=/tmp
-
- if ! test -z "$with_test_socket_dir" ; then
- TEST_SOCKET_DIR="$with_test_socket_dir"
+++ /dev/null
-#! /bin/sh
-# -*- coding: utf-8 -*-
-# Debian init.d script for D-BUS
-# Copyright © 2003 Colin Walters <walters@debian.org>
-# Copyright 2008 OE Team
-
-set -e
-
-DAEMON=/usr/bin/dbus-daemon
-NAME=dbus
-DAEMONUSER=messagebus
-RUNDIR=/var/run/dbus
-PIDFILE=/var/run/dbus/pid
-UUIDDIR=/var/lib/dbus
-DESC="system message bus"
-EVENTDIR=/etc/dbus-1/event.d
-
-test -x $DAEMON || exit 0
-
-# Source defaults file; edit that file to configure this script.
-ENABLED=1
-PARAMS=""
-if [ -e /etc/default/dbus ]; then
- . /etc/default/dbus
-fi
-
-test "$ENABLED" != "0" || exit 0
-
-start_it_up()
-{
- if [ ! -d $RUNDIR ]; then
- mkdir -p $RUNDIR
- chown $DAEMONUSER $RUNDIR
- chgrp $DAEMONUSER $RUNDIR
- fi
- if [ -e $PIDFILE ]; then
- PIDDIR=/proc/$(cat $PIDFILE)
- if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
- echo "$DESC already started; not starting."
- else
- echo "Removing stale PID file $PIDFILE."
- rm -f $PIDFILE
- fi
- fi
-
- if [ ! -d $UUIDDIR ]; then
- mkdir -p $UUIDDIR
- chown $DAEMONUSER $UUIDDIR
- chgrp $DAEMONUSER $UUIDDIR
- fi
-
- dbus-uuidgen --ensure
-
- echo -n "Starting $DESC: "
- start-stop-daemon --start --pidfile $PIDFILE \
- --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- if [ -d $EVENTDIR ]; then
- run-parts --arg=start $EVENTDIR
- fi
-}
-
-shut_it_down()
-{
- if [ -d $EVENTDIR ]; then
- # TODO: --reverse when busybox supports it
- run-parts --arg=stop $EVENTDIR
- fi
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --oknodo --pidfile $PIDFILE \
- --user $DAEMONUSER
- # We no longer include these arguments so that start-stop-daemon
- # can do its job even given that we may have been upgraded.
- # We rely on the pidfile being sanely managed
- # --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- rm -f $PIDFILE
-}
-
-reload_it()
-{
- echo -n "Reloading $DESC config: "
- dbus-send --print-reply --system --type=method_call \
- --dest=org.freedesktop.DBus \
- / org.freedesktop.DBus.ReloadConfig > /dev/null
- # hopefully this is enough time for dbus to reload it's config file.
- echo "done."
-}
-
-case "$1" in
- start)
- start_it_up
- ;;
- stop)
- shut_it_down
- ;;
- reload|force-reload)
- reload_it
- ;;
- restart)
- shut_it_down
- sleep 1
- start_it_up
- ;;
- *)
- echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
-+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
-@@ -1047,15 +1048,18 @@
- AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
-
- #### Find socket directories
--if ! test -z "$TMPDIR" ; then
-- DEFAULT_SOCKET_DIR=$TMPDIR
--elif ! test -z "$TEMP" ; then
-- DEFAULT_SOCKET_DIR=$TEMP
--elif ! test -z "$TMP" ; then
-- DEFAULT_SOCKET_DIR=$TMP
--else
-- DEFAULT_SOCKET_DIR=/tmp
--fi
-+#if ! test -z "$TMPDIR" ; then
-+# DEFAULT_SOCKET_DIR=$TMPDIR
-+#elif ! test -z "$TEMP" ; then
-+# DEFAULT_SOCKET_DIR=$TEMP
-+#elif ! test -z "$TMP" ; then
-+# DEFAULT_SOCKET_DIR=$TMP
-+#else
-+# DEFAULT_SOCKET_DIR=/tmp
-+#fi
-+
-+# checks disabled to avoid expanding this at build time
-+DEFAULT_SOCKET_DIR=/tmp
-
- if ! test -z "$with_test_socket_dir" ; then
- TEST_SOCKET_DIR="$with_test_socket_dir"
+++ /dev/null
-#! /bin/sh
-# -*- coding: utf-8 -*-
-# Debian init.d script for D-BUS
-# Copyright © 2003 Colin Walters <walters@debian.org>
-# Copyright 2008 OE Team
-
-set -e
-
-DAEMON=/usr/bin/dbus-daemon
-NAME=dbus
-DAEMONUSER=messagebus
-RUNDIR=/var/run/dbus
-PIDFILE=/var/run/dbus/pid
-UUIDDIR=/var/lib/dbus
-DESC="system message bus"
-EVENTDIR=/etc/dbus-1/event.d
-
-test -x $DAEMON || exit 0
-
-# Source defaults file; edit that file to configure this script.
-ENABLED=1
-PARAMS=""
-if [ -e /etc/default/dbus ]; then
- . /etc/default/dbus
-fi
-
-test "$ENABLED" != "0" || exit 0
-
-start_it_up()
-{
- if [ ! -d $RUNDIR ]; then
- mkdir -p $RUNDIR
- chown $DAEMONUSER $RUNDIR
- chgrp $DAEMONUSER $RUNDIR
- fi
- if [ -e $PIDFILE ]; then
- PIDDIR=/proc/$(cat $PIDFILE)
- if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
- echo "$DESC already started; not starting."
- else
- echo "Removing stale PID file $PIDFILE."
- rm -f $PIDFILE
- fi
- fi
-
- if [ ! -d $UUIDDIR ]; then
- mkdir -p $UUIDDIR
- chown $DAEMONUSER $UUIDDIR
- chgrp $DAEMONUSER $UUIDDIR
- fi
-
- dbus-uuidgen --ensure
-
- echo -n "Starting $DESC: "
- start-stop-daemon --start --pidfile $PIDFILE \
- --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- if [ -d $EVENTDIR ]; then
- run-parts --arg=start $EVENTDIR
- fi
-}
-
-shut_it_down()
-{
- if [ -d $EVENTDIR ]; then
- # TODO: --reverse when busybox supports it
- run-parts --arg=stop $EVENTDIR
- fi
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --oknodo --pidfile $PIDFILE \
- --user $DAEMONUSER
- # We no longer include these arguments so that start-stop-daemon
- # can do its job even given that we may have been upgraded.
- # We rely on the pidfile being sanely managed
- # --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- rm -f $PIDFILE
-}
-
-reload_it()
-{
- echo -n "Reloading $DESC config: "
- dbus-send --print-reply --system --type=method_call \
- --dest=org.freedesktop.DBus \
- / org.freedesktop.DBus.ReloadConfig > /dev/null
- # hopefully this is enough time for dbus to reload it's config file.
- echo "done."
-}
-
-case "$1" in
- start)
- start_it_up
- ;;
- stop)
- shut_it_down
- ;;
- reload|force-reload)
- reload_it
- ;;
- restart)
- shut_it_down
- sleep 1
- start_it_up
- ;;
- *)
- echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
-+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
-@@ -1047,15 +1048,18 @@
- AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
-
- #### Find socket directories
--if ! test -z "$TMPDIR" ; then
-- DEFAULT_SOCKET_DIR=$TMPDIR
--elif ! test -z "$TEMP" ; then
-- DEFAULT_SOCKET_DIR=$TEMP
--elif ! test -z "$TMP" ; then
-- DEFAULT_SOCKET_DIR=$TMP
--else
-- DEFAULT_SOCKET_DIR=/tmp
--fi
-+#if ! test -z "$TMPDIR" ; then
-+# DEFAULT_SOCKET_DIR=$TMPDIR
-+#elif ! test -z "$TEMP" ; then
-+# DEFAULT_SOCKET_DIR=$TEMP
-+#elif ! test -z "$TMP" ; then
-+# DEFAULT_SOCKET_DIR=$TMP
-+#else
-+# DEFAULT_SOCKET_DIR=/tmp
-+#fi
-+
-+# checks disabled to avoid expanding this at build time
-+DEFAULT_SOCKET_DIR=/tmp
-
- if ! test -z "$with_test_socket_dir" ; then
- TEST_SOCKET_DIR="$with_test_socket_dir"
+++ /dev/null
-Index: dbus-1.3.1/configure.in
-===================================================================
---- dbus-1.3.1.orig/configure.in
-+++ dbus-1.3.1/configure.in
-@@ -137,6 +137,7 @@
- AC_ARG_WITH(console-owner-file, AS_HELP_STRING([--with-console-owner-file=[filename]],[file whose owner determines current console owner]))
- AC_ARG_WITH(dbus_user, AS_HELP_STRING([--with-dbus-user=<user>],[User for running the DBUS daemon (messagebus)]))
- AC_ARG_WITH(dbus_daemondir, AS_HELP_STRING([--with-dbus-daemondir=[dirname]],[Directory for installing the DBUS daemon]))
-+AC_ARG_WITH(dbus_default_reply_timeout, AS_HELP_STRING([--with-dbus-default-reply-timeout=[milliseconds]],[Default reply timeout for DBus method calls]))
-
- dnl DBUS_BUILD_TESTS controls unit tests built in to .c files
- dnl and also some stuff in the test/ subdir
-@@ -984,6 +985,13 @@
- fi
- fi
-
-+if test -z "$with_dbus_default_reply_timeout" ; then
-+ DBUS_DEFAULT_REPLY_TIMEOUT=25000
-+else
-+ DBUS_DEFAULT_REPLY_TIMEOUT=$with_dbus_default_reply_timeout
-+fi
-+AC_DEFINE_UNQUOTED(_DBUS_DEFAULT_TIMEOUT_VALUE,$DBUS_DEFAULT_REPLY_TIMEOUT,[default timeout value for dbus calls])
-+
- #### Set up final flags
- DBUS_CLIENT_CFLAGS=
- DBUS_CLIENT_LIBS="$THREAD_LIBS $NETWORK_libs"
-@@ -1625,6 +1633,7 @@
- Gettext libs (empty OK): ${INTLLIBS}
- Using XML parser: ${with_xml}
- Init scripts style: ${with_init_scripts}
-+ Default reply timeout: ${DBUS_DEFAULT_REPLY_TIMEOUT}
- Abstract socket names: ${ac_cv_have_abstract_sockets}
- System bus socket: ${DBUS_SYSTEM_SOCKET}
- System bus address: ${DBUS_SYSTEM_BUS_DEFAULT_ADDRESS}
-Index: dbus-1.3.1/dbus/dbus-connection-internal.h
-===================================================================
---- dbus-1.3.1.orig/dbus/dbus-connection-internal.h
-+++ dbus-1.3.1/dbus/dbus-connection-internal.h
-@@ -41,9 +41,6 @@
- DBUS_ITERATION_BLOCK = 1 << 2 /**< Block if nothing to do. */
- } DBusIterationFlags;
-
--/** default timeout value when waiting for a message reply, 25 seconds */
--#define _DBUS_DEFAULT_TIMEOUT_VALUE (25 * 1000)
--
- void _dbus_connection_lock (DBusConnection *connection);
- void _dbus_connection_unlock (DBusConnection *connection);
- DBusConnection * _dbus_connection_ref_unlocked (DBusConnection *connection);
+++ /dev/null
-#! /bin/sh
-# -*- coding: utf-8 -*-
-# Debian init.d script for D-BUS
-# Copyright © 2003 Colin Walters <walters@debian.org>
-# Copyright 2008 OE Team
-
-set -e
-
-DAEMON=/usr/bin/dbus-daemon
-NAME=dbus
-DAEMONUSER=messagebus
-RUNDIR=/var/run/dbus
-PIDFILE=/var/run/dbus/pid
-UUIDDIR=/var/lib/dbus
-DESC="system message bus"
-EVENTDIR=/etc/dbus-1/event.d
-
-test -x $DAEMON || exit 0
-
-# Source defaults file; edit that file to configure this script.
-ENABLED=1
-PARAMS=""
-if [ -e /etc/default/dbus ]; then
- . /etc/default/dbus
-fi
-
-test "$ENABLED" != "0" || exit 0
-
-start_it_up()
-{
- if [ ! -d $RUNDIR ]; then
- mkdir -p $RUNDIR
- chown $DAEMONUSER $RUNDIR
- chgrp $DAEMONUSER $RUNDIR
- fi
- if [ -e $PIDFILE ]; then
- PIDDIR=/proc/$(cat $PIDFILE)
- if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
- echo "$DESC already started; not starting."
- else
- echo "Removing stale PID file $PIDFILE."
- rm -f $PIDFILE
- fi
- fi
-
- if [ ! -d $UUIDDIR ]; then
- mkdir -p $UUIDDIR
- chown $DAEMONUSER $UUIDDIR
- chgrp $DAEMONUSER $UUIDDIR
- fi
-
- dbus-uuidgen --ensure
-
- echo -n "Starting $DESC: "
- start-stop-daemon --start --pidfile $PIDFILE \
- --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- if [ -d $EVENTDIR ]; then
- run-parts --arg=start $EVENTDIR
- fi
-}
-
-shut_it_down()
-{
- if [ -d $EVENTDIR ]; then
- # TODO: --reverse when busybox supports it
- run-parts --arg=stop $EVENTDIR
- fi
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --oknodo --pidfile $PIDFILE \
- --user $DAEMONUSER
- # We no longer include these arguments so that start-stop-daemon
- # can do its job even given that we may have been upgraded.
- # We rely on the pidfile being sanely managed
- # --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- rm -f $PIDFILE
-}
-
-reload_it()
-{
- echo -n "Reloading $DESC config: "
- dbus-send --print-reply --system --type=method_call \
- --dest=org.freedesktop.DBus \
- / org.freedesktop.DBus.ReloadConfig > /dev/null
- # hopefully this is enough time for dbus to reload it's config file.
- echo "done."
-}
-
-case "$1" in
- start)
- start_it_up
- ;;
- stop)
- shut_it_down
- ;;
- reload|force-reload)
- reload_it
- ;;
- restart)
- shut_it_down
- sleep 1
- start_it_up
- ;;
- *)
- echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
-+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
-@@ -1047,15 +1048,18 @@
- AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
-
- #### Find socket directories
--if ! test -z "$TMPDIR" ; then
-- DEFAULT_SOCKET_DIR=$TMPDIR
--elif ! test -z "$TEMP" ; then
-- DEFAULT_SOCKET_DIR=$TEMP
--elif ! test -z "$TMP" ; then
-- DEFAULT_SOCKET_DIR=$TMP
--else
-- DEFAULT_SOCKET_DIR=/tmp
--fi
-+#if ! test -z "$TMPDIR" ; then
-+# DEFAULT_SOCKET_DIR=$TMPDIR
-+#elif ! test -z "$TEMP" ; then
-+# DEFAULT_SOCKET_DIR=$TEMP
-+#elif ! test -z "$TMP" ; then
-+# DEFAULT_SOCKET_DIR=$TMP
-+#else
-+# DEFAULT_SOCKET_DIR=/tmp
-+#fi
-+
-+# checks disabled to avoid expanding this at build time
-+DEFAULT_SOCKET_DIR=/tmp
-
- if ! test -z "$with_test_socket_dir" ; then
- TEST_SOCKET_DIR="$with_test_socket_dir"
git.openpandora.org / openembedded.git / commitdiff