#
-# Open Iomega distribution - based on openslug and generic confs
+# OpenProtium distribution - based upon openslug and generic confs
#
DISTRO_NAME = "openprotium"
-DISTRO_VERSION = ".dev-snapshot-${SRCDATE}"
-DISTRO_TYPE = "alpha"
+DISTRO_VERSION = "1.3"
+DISTRO_TYPE ?= "alpha"
+TARGET_OS = "linux"
+#
+# Basic configuration
+#
+DISTRO_DEV_MANAGER = "udev"
+DISTRO_SSH_DAEMON = "dropbear"
+DISTRO_INIT_MANAGER = "sysvinit"
+DISTRO_LOGIN_MANAGER = "tinylogin"
+MACHINE_TASK_PROVIDER = "task-openprotium"
#
# Naming schemes
#
-INHERIT += "debian"
+INHERIT += "debian multimachine"
#
# Packaging and output format
#
INHERIT += "package_ipk"
-IMAGE_BASENAME = "openprotium"
-IMAGE_FSTYPES = "jffs2"
-FEED_URIS = "openprotium##http://www.openprotium.org/ipkg.ppc.v1.0"
+IMAGE_FSTYPES = "jffs2 tar.gz"
+OPENPROTIUM_URI = "http://www.openprotium.org"
+FEED_ARCH ?= ${PACKAGE_ARCH}
+FEED_URIS = "\
+ no-arch##${OPENPROTIUM_URI}/releases/${DISTRO_VERSION}/all \
+ base##${OPENPROTIUM_URI}/releases/${DISTRO_VERSION}/${FEED_ARCH} \
+ ${MACHINE}##${OPENPROTIUM_URI}/releases/${DISTRO_VERSION}/${MACHINE} \
+ "
# For protium on the turbostation
+IMAGE_BASENAME = "openprotium"
IMAGE_BASENAME_turbostation = "openprotium-ts"
-#
-# binutils and compilers
-#
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}g++:gcc-cross"
-#conflict between this and the last below.
-#PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-# Select 2.6 versions of the depmod support
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc-intermediate"
+# versions
+PREFERRED_VERSION_binutils ?= "2.18"
+PREFERRED_VERSION_binutils-cross ?= "2.18"
-PREFERRED_VERSION_binutils = "2.16"
-PREFERRED_VERSION_binutils-cross = "2.16"
+PREFERRED_VERSION_gcc ?= "4.1.1"
+PREFERRED_VERSION_gcc-cross ?= "4.1.2"
+PREFERRED_VERSION_gcc-cross-sdk ?= "4.1.2"
+PREFERRED_VERSION_gcc-cross-initial ?= "4.1.2"
-PREFERRED_VERSION_gcc = "4.1.1"
-PREFERRED_VERSION_gcc-cross = "4.1.1"
-PREFERRED_VERSION_gcc-cross-initial = "4.1.1"
+PREFERRED_VERSION_glibc = "2.6.1"
+PREFERRED_VERSION_glibc-intermediate = "2.6.1"
+PREFERRED_VERSION_glibc-initial = "2.6.1"
-PREFERRED_VERSION_glibc = "2.5"
-PREFERRED_VERSION_glibc-intermediate = "2.5"
-PREFERRED_VERSION_glibc-initial = "2.3.2"
+PREFERRED_VERSION_linux-libc-headers = "2.6.11.1"
-#
-# Target OS & FPU system
#
-USE_NLS ?= "no"
-TARGET_OS = "linux"
-HOTPLUG = "udev"
-PREFERRED_PROVIDER_virtual/libiconv = "glibc"
-PREFERRED_PROVIDER_virtual/libintl = "glibc"
-
+# Providers...
#
-# Bootstrap & Init
+# binutils and compilers
#
-#PREFERRED_PROVIDER_task-bootstrap = "task-bootstrap"
-require conf/distro/include/sane-srcdates.inc
+PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}binutils = "binutils-cross"
+PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-initial = "gcc-cross-initial"
+PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc = "gcc-cross"
+PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}g++ = "gcc-cross"
+
+PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-for-gcc = "glibc-intermediate"
+PREFERRED_PROVIDER_virtual/powerpc-linux-libc-for-gcc = "glibc-intermediate"
+PREFERRED_PROVIDER_virtual/powerpc-linux-libc-initial = "glibc-initial"
+
+PREFERRED_PROVIDER_virtual/libc = "glibc"
+PREFERRED_PROVIDER_virtual/libiconv = "glibc"
+PREFERRED_PROVIDER_virtual/libintl = "glibc"
+
+#silence a warning message...
+PREFERRED_PROVIDER_linux-libc-headers = "linux-libc-headers"
+
#
+# Misc items.
#
-# Ensure consistency across all SlugOS builds for the provider of a
-# relational database - use the latest version of the SleepyCat
-# Berkeley database
-PREFERRED_PROVIDER_virtual/db = "db"
-PREFERRED_PROVIDER_virtual/db-native = "db-native"
+PREFERRED_PROVIDER_virtual/db ?= "db"
+PREFERRED_PROVIDER_virtual/db-native ?= "db-native"
+PREFERRED_PROVIDER_gconf ?= "gconf"
-CMDLINE_DEBUG = "noirqdebug"
+require conf/distro/include/sane-srcdates.inc
+require conf/distro/include/sane-srcrevs.inc
--- /dev/null
+#<path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+#/dev/mem c 640 0 0 1 1 0 0 -
+#
+#type can be one of:
+# f A regular file
+# d Directory
+# c Character special device file
+# b Block special device file
+# p Fifo (named pipe)
+
+/dev d 755 0 0 - - - - -
+/dev/initctl p 600 0 0 - - - - -
+/dev/apm_bios c 660 0 46 10 134 - - -
+/dev/fb0 c 600 0 0 29 0 - - -
+/dev/hda b 660 0 6 3 0 - - -
+/dev/hda b 660 0 6 3 1 1 1 5
+/dev/kmem c 640 0 15 1 2 - - -
+/dev/mem c 640 0 15 1 1 - - -
+/dev/null c 666 0 0 1 3 - - -
+/dev/ram b 640 0 0 1 0 0 1 4
+/dev/tty c 662 0 5 5 0 - - -
+/dev/tty c 666 0 5 4 0 0 1 9
+/dev/ttyS c 640 0 5 4 64 0 1 2
+/dev/ttySA c 640 0 5 204 5 0 1 1
+/dev/zero c 644 0 0 1 5 - - -
+/dev/mtd c 660 0 6 90 0 0 2 8
+/dev/mtdblock b 640 0 0 31 0 0 1 8
+/dev/console c 662 0 5 5 1 - - -
+/dev/random c 644 0 0 1 8 - - -
+/dev/urandom c 644 0 0 1 9 - - -
+/dev/ptmx c 644 0 0 5 2 - - -
+/dev/md b 644 0 0 9 0 0 1 4
--- /dev/null
+rootfs / auto defaults 1 1
+proc /proc proc defaults 0 0
+devpts /dev/pts devpts mode=0620,gid=5 0 0
+usbfs /proc/bus/usb usbfs defaults 0 0
+#tmpfs /var/volatile tmpfs defaults 0 0
+tmpfs /dev/shm tmpfs mode=0777 0 0
+#tmpfs /media/ram tmpfs defaults 0 0
+
+# uncomment this if your device has a SD/MMC/Transflash slot
+#/dev/mmcblk0p1 /media/card auto defaults,sync,noauto 0 0
+
DESCRIPTION = "OpenProtium image"
HOMEPAGE = "http://www.openprotium.com"
-DEPENDS = "${MACHINE_TASK_PROVIDER}"
-EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x10000 -D ${SLUGOS_DEVICE_TABLE}"
+DEPENDS = "task-openprotium"
+IMAGE_INSTALL = "task-openprotium"
IMAGE_LINGUAS = ""
-# Setting USE_DEVFS prevents *any* entries being created initially
-# in /dev
-USE_DEVFS = "1"
+IMAGE_NAME = "${IMAGE_BASENAME}-${MACHINE}-${DISTRO_VERSION}"
+PACKAGE_REMOVE = "kernel-image-* task-openprotium"
-# This is passed to the image command to build the correct /dev
-# directory (because only the image program can make actual
-# dev entries!)
-SLUGOS_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-slugos.txt')}"
+USE_DEVFS = "1"
+OPENPROTIUM_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-minimal-add-md.txt')}"
+EXTRA_IMAGECMD_jffs2 += " -D ${OPENPROTIUM_DEVICE_TABLE}"
-# IMAGE_PREPROCESS_COMMAND is run before making the image.
-# We use this to do a few things:
-# . remove the uImage, which is in a separate part of the flash already.
-# . adjust the default run level (sysvinit is 5 by default, we like 3)
-# . set a default root password, which is no more secure than a blank one
-# (since it is documented, in case you were wondering)
-# . make the boot more verbose
-#
-IMAGE_PREPROCESS_COMMAND += "rm ${IMAGE_ROOTFS}/boot/uImage-*;"
-IMAGE_PREPROCESS_COMMAND += "sed -i -es,^id:5:initdefault:,id:3:initdefault:, ${IMAGE_ROOTFS}/etc/inittab;"
+IMAGE_PREPROCESS_COMMAND += "install -c -m 644 ${OPENPROTIUM_DEVICE_TABLE} ${IMAGE_ROOTFS}/etc/device_table;"
+IMAGE_PREPROCESS_COMMAND += "sed -i -es,^id:5:initdefault:,id:3:initdefault:, ${IMAGE_ROOTFS}/etc/inittab;"
IMAGE_PREPROCESS_COMMAND += "sed -i -es,^root::0,root:BTMzOOAQfESg6:0, ${IMAGE_ROOTFS}/etc/passwd;"
IMAGE_PREPROCESS_COMMAND += "sed -i -es,^VERBOSE=no,VERBOSE=very, ${IMAGE_ROOTFS}/etc/default/rcS;"
+IMAGE_PREPROCESS_COMMAND += "sed -i -es,^VOLATILE_ENABLE_CACHE=yes,VOLATILE_ENABLE_CACHE=no, ${IMAGE_ROOTFS}/etc/default/rcS;"
+IMAGE_PREPROCESS_COMMAND += "sed -i -es,/dev/tty0,/dev/console, ${IMAGE_ROOTFS}/etc/init.d/populate-volatile.sh;"
+IMAGE_PREPROCESS_COMMAND += "echo /dev/md >> ${IMAGE_ROOTFS}/etc/udev/mount.blacklist;"
+IMAGE_PREPROCESS_COMMAND += "echo /dev/hd >> ${IMAGE_ROOTFS}/etc/udev/mount.blacklist;"
+IMAGE_PREPROCESS_COMMAND += "echo /dev/mtd3 0x30000 0x10000 0x10000 > ${IMAGE_ROOTFS}/etc/fw_env.config;"
-# Always just make a new flash image.
-PACK_IMAGE = 'storcenter_pack_image;'
-IMAGE_POSTPROCESS_COMMAND += "${PACK_IMAGE}"
-PACK_IMAGE_DEPENDS = ""
-#EXTRA_IMAGEDEPENDS += "${PACK_IMAGE_DEPENDS}"
-
-# This hack removes '${MACHINE}' from the end of the arch.conf for ipk,
-# preventing _mach.ipk (with no byte sex) taking precedence over everything
-# else.
-# but we want 'storcenter' in there so kernel modules work correctly.
-#
-#ROOTFS_POSTPROCESS_COMMAND += "sed -i '$d' '${IMAGE_ROOTFS}/etc/ipkg/arch.conf';"
-
-# These depends define native utilities - they do not get put in the flash and
-# are not required to build the image.
-IMAGE_TOOLS = ""
-#EXTRA_IMAGEDEPENDS += "${IMAGE_TOOLS}"
-
-# CONFIG:
-# SLUGOS_EXTRA_RDEPENDS: set in conf, things to add to the image
-# SLUGOS_SUPPORT: set to here, see below, added to the image.
-# SLUGOS_KERNEL: set here, kernel modules added to the image
-#
-# Do not override the last two unless you really know what you
-# are doing - there is more information below.
-
-# diff, cpio and find are required for reflash and turnup ram.
-# Removing these probably leaves the system bootable, but standard
-# openslug and ucslugc stuff won't work, so only take these out in
-# very non-standard turnkey slugos builds.
-#
-# udev is the default way of handling devices, there is no guarantee
-# that the static device table is completely correct (it is just
-# known to be sufficient for boot.)
-# we'ere still on 2.6.12 devfs....
-#OPENPROTIUM_SUPPORT ?= "diffutils cpio findutils udev"
-#
-OPENPROTIUM_SUPPORT ?= "diffutils cpio findutils uboot-utils"
-
-# kernel-module-af-packet must be in the image for DHCP to work
-# kernel-module-netconsole is here because it is small and is
-# highly useful on minimal systems (which really don't have anywhere
-# other than the network to output error messages!)
-SLUGOS_KERNEL ?= "kernel-module-af-packet kernel-module-netconsole \
- kernel-module-mii "
-
-# this gets /lib/modules made....
-OPENPROTIUM_KERNEL = "kernel-module-dummy \
- kernel-module-af-packet "
-
-IMAGE_INSTALL = " \
- kernel base-files base-passwd netbase \
- busybox initscripts-openprotium openprotium-init \
- update-modules sysvinit tinylogin \
- module-init-tools-depmod modutils-initscripts \
- ipkg-collateral ipkg ipkg-link \
- libgcc1 \
- portmap \
- dropbear \
- e2fsprogs-blkid \
- mdadm \
- hdparm \
- mtd-utils \
- ${OPENPROTIUM_SUPPORT} \
- ${OPENPROTIUM_KERNEL} "
-# ${SLUGOS_EXTRA_RDEPENDS}"
-
-inherit image
+ROOTFS_POSTPROCESS_COMMAND += "ipkg-cl ${IPKG_ARGS} -force-depends \
+ remove ${PACKAGE_REMOVE};"
-storcenter_pack_image() {
- # find latest kernel
- KERNEL=`ls -tr ${DEPLOY_DIR_IMAGE}/uImage* | tail -1`
- if [ -z "$KERNEL" ]; then
- oefatal "No kernel found in ${DEPLOY_DIR_IMAGE}. Bitbake linux-storcenter to create one."
- exit 1
- fi
- ROOTFS=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2
- OUTPUT=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.flash.img
- PADFILE=${DEPLOY_DIR_IMAGE}/padfile.zzz
- HEX_MAX_KERN_SIZE=170000
- DEC_MAX_KERN_SIZE=`echo "ibase=16; $HEX_MAX_KERN_SIZE" | bc `
- HEX_MAX_ROOT_SIZE=590000
- DEC_MAX_ROOT_SIZE=`echo "ibase=16; $HEX_MAX_ROOT_SIZE" | bc `
- KERNEL_SIZE=`ls -l $KERNEL | awk '{print $5}'`
- if [ $KERNEL_SIZE -gt $DEC_MAX_KERN_SIZE ]; then
- oefatal "Kernel too large at $KERNEL_SIZE bytes. Max is $DEC_MAX_KERN_SIZE."
- exit 1
- fi
- ROOT_SIZE=`ls -l $ROOTFS | awk '{print $5}'`
- if [ $ROOT_SIZE -gt $DEC_MAX_ROOT_SIZE ]; then
- oefatal "Rootfs is too large at $ROOT_SIZE bytes. Max is $DEC_MAX_ROOT_SIZE."
- exit 1
- fi
- PAD_SIZE=`echo "$DEC_MAX_KERN_SIZE - $KERNEL_SIZE" | bc `
- dd if=/dev/zero of=$PADFILE bs=$PAD_SIZE count=1 2>>/dev/null
- cat $KERNEL $PADFILE $ROOTFS > $OUTPUT
- rm -f $PADFILE
- ls -l $OUTPUT
-}
+inherit image concatenated-image
: > /etc/mtab
fi
mount -f -o remount /
- mount -f /proc
+ grep -q '^proc /proc' /etc/mtab || mount -f /proc
test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs"
fi
--- /dev/null
+#
+# mountall.sh Mount all filesystems.
+#
+# Version: @(#)mountall.sh 2.83-2 01-Nov-2001 miquels@cistron.nl
+#
+. /etc/default/rcS
+
+#
+# Mount local filesystems in /etc/fstab. For some reason, people
+# might want to mount "proc" several times, and mount -v complains
+# about this. So we mount "proc" filesystems without -v.
+#
+test "$VERBOSE" != no && echo "Mounting local filesystems..."
+mount -at nonfs,nosmbfs,noncpfs 2>/dev/null
+
+#
+# We might have mounted something over /dev, see if /dev/initctl is there.
+#
+if test ! -p /dev/initctl
+then
+ rm -f /dev/initctl
+ mknod -m 600 /dev/initctl p
+fi
+kill -USR1 1
+
+: exit 0
+
--- /dev/null
+#! /bin/sh
+#
+# umountfs Turn off swap and unmount all local filesystems.
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+echo "Deactivating swap..."
+swapoff -a
+
+# We leave /proc mounted.
+echo "Unmounting local filesystems..."
+# umount anything not a pseudo file system, and not root
+# doesn't work for nested mounts at a non-root mount point
+while read device mountpt fstype options
+do
+ echo "$device" | grep -q "^/"
+ if [ $? -eq 0 ]; then
+ if [ "$mountpt" != "/" ] && [ "$mountpt" != "/dev/" ]; then
+ umount $mountpt
+ fi
+ fi
+done</proc/mounts
+
+mount -o remount,ro /
+
+: exit 0
--- /dev/null
+#!/bin/sh
+# umount the static dev - we'd probably never use it.
+#
+[ -d /dev/.static/dev ] && umount /dev/.static/dev
+#
+# if a root is found on an ext* filesystem, umount the old initrd
+#
+grep -q "/ ext" /proc/mounts
+if [ $? -eq 0 ]; then
+ umount /initrd
+fi
SRC_URI += "file://openprotium/reboot"
SRC_URI += "file://openprotium/flashclean"
SRC_URI += "file://openprotium/checkroot.sh"
+SRC_URI += "file://openprotium/mountall.sh"
+SRC_URI += "file://openprotium/umountinitrd.sh"
+SRC_URI += "file://openprotium/umountfs"
# Without this it is not possible to patch checkroot.sh
S = "${WORKDIR}"
do_install_append() {
- # the image build command now installs this for slugos
- # except that mine doesn't. we don't need it, but we turnup
- # expects it to at least exist
- rm ${D}${sysconfdir}/device_table
- touch ${D}${sysconfdir}/device_table
+ #rm ${D}${sysconfdir}/device_table
+ #touch ${D}${sysconfdir}/device_table
# openprotium specific scripts
# install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d
install -m 0755 ${WORKDIR}/openprotium/devices ${D}${sysconfdir}/init.d
install -m 0755 ${WORKDIR}/openprotium/flashclean ${D}${sysconfdir}/init.d
install -m 0755 ${WORKDIR}/openprotium/checkroot.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${WORKDIR}/openprotium/mountall.sh ${D}${sysconfdir}/init.d
+ install -m 0755 ${WORKDIR}/openprotium/umountinitrd.sh ${D}${sysconfdir}/init.d
# Remove the do install links (this detects a change to the
# initscripts .bb file - it will cause a build failure here.)
# slugos network syslog starts here (44)
update-rc.d -r ${D} mountnfs.sh start 45 S .
- update-rc.d -r ${D} bootmisc.sh start 55 S .
+ # update-rc.d -r ${D} bootmisc.sh start 55 S .
# urandom is currently disabled from S 55 (and won't work with tmpfs /var)
# ipkg-cl configure runs at S 98
# This is the special, correct, slugos umountnfs.sh (it looks in
# the /proc/mounts information, not /etc/fstab)
update-rc.d -r ${D} umountnfs.sh start 31 0 6 .
- update-rc.d -r ${D} save-rtc.sh start 25 0 6 .
+ # update-rc.d -r ${D} save-rtc.sh start 25 0 6 .
# portmap stops at 32
# slugos network syslog stops here (39)
# networking stops at 40 (nothing else does, believe me.)
# flac \
# gphoto2 \
# gdb \
-# glib-2.0 \
# lirc \
# masqmail \
# wakelan \
# wireless-tools \
# wpa-supplicant \
+# openldap \
# bluez-utils-nodbus \
+# lcdproc \
# libxml2 \
# libdvb \
# madwifi-ng \
# samba \
# sane-backends \
# vsftpd \
+# syslog-ng \
# zd1211 \
+# cdparanoia \
+# litestream \
+# pvrusb2-mci \
+# pwc \
+# fetchmail \
OPENPROTIUM_PACKAGES = "\
alsa-lib \
bridge-utils \
bzip2 \
ccxstream \
- cdparanoia \
cdstatus \
coreutils \
cron \
e2fsprogs-libs \
expat \
ez-ipupdate \
- fetchmail \
file \
findutils \
flex \
gawk \
gcc \
gdbm \
+ glib-2.0 \
gnu-config \
grep \
gtk-doc \
ircp \
joe \
jpeg \
- lcdproc \
- less \
libao \
libid3tag \
liblockfile \
libupnp \
libusb \
libvorbis \
- litestream \
lrzsz \
lsof \
lvm2 \
nmap \
ntp \
openobex-apps \
- openldap \
openntpd \
openobex \
openssh \
pkgconfig \
ppp \
procps \
- pvrusb2-mci \
- pwc \
quilt \
rng-tools \
rsync \
strace \
streamripper \
sysfsutils \
- syslog-ng \
tar \
thttpd \
tiff \
util-linux \
vim \
vlan \
- watchdog \
wget \
zip \
zlib \
sleep=6
test "$sleep" -gt 0 && sleep "$sleep"
else
- # make the device links so turnup can use short disk names.
- # probably only necessary on devfs based systems.
- /etc/init.d/devices start
scc -l redflash -f auto
fi
#
# use this rather than hard-wiring the device because the partition
# table can change - looking in /proc/mtd is more reliable.
mtdev(){
- if test $(machine) = storcenter ; then
- sed -n 's!^mtd\([0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/mtd/\1!p' /proc/mtd
- else
sed -n 's!^\(mtd[0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/\1!p' /proc/mtd
- fi
}
#
# mtblockdev "name"
# as mtdev but output the name of the block (not character) device
mtblockdev(){
- if test "$(machine)" = storcenter ; then
- sed -n 's!^mtd\([0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/mtdblock/\1!p' /proc/mtd
- else
sed -n 's!^mtd\([0-9][0-9]*\):[^"]*"'"$1"'"$!/dev/mtdblock\1!p' /proc/mtd
- fi
}
#
# mtsize "name"
--- /dev/null
+#!/bin/sh
+#
+# This script is executed at the start and end of each run-level
+# transition. It is the first 'stop' script and the last 'start'
+# script.
+#
+# 'stop' indicates the start of a runlevel change
+# 'start' at the end of the runlevel change - we are in the new
+# runlevel.
+#
+# state outputs 'system', 'user' etc according the the nature of
+# the runlevel it is passed (the *new* runlevel is used).
+state(){
+ case "$1" in
+ S|N) echo system;;
+ 0|6) echo shutdown;;
+ 1) echo singleuser;;
+ 2|3|4|5) echo user;;
+ *) echo "led change: $runlevel: runlevel unknown" >&2
+ echo system;;
+ esac
+}
+
+case "$1" in
+start) scc -l blue -f auto;;
+stop) scc -l redflash;;
+*) echo "led change: $1: command ignored" >&2
+ ;;
+esac
file://initscripts/sysconfsetup \
file://initscripts/umountinitrd.sh \
file://initscripts/loadmodules.sh \
+ file://initscripts/zleds \
file://functions \
file://modulefunctions \
file://conffiles \
BOOTSCRIPTS = "flash disk nfs network udhcpc.script"
INITSCRIPTS = "syslog.buffer syslog.file syslog.network \
rmrecovery sysconfsetup umountinitrd.sh \
- fixfstab loadmodules.sh"
+ fixfstab loadmodules.sh zleds"
# This just makes things easier...
update-rc.d $opt syslog.file start 39 S . start 47 0 6 .
update-rc.d $opt syslog.network start 44 S . start 39 0 6 .
update-rc.d $opt rmrecovery start 99 1 2 3 4 5 .
+ update-rc.d $opt zleds start 99 1 2 3 4 5 . stop 5 0 1 2 3 4 5 6 .
+
}
pkg_postrm_openprotium-init() {
--- /dev/null
+DESCRIPTION = "Basic image for openprotium"
+HOMEPAGE = "http://www.openprotium.org"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+ALLOW_EMPTY = "1"
+PR = "r1"
+
+inherit task
+
+# be sure to build the kernel:
+DEPENDS = "virtual/kernel"
+
+# always make this one for testing.
+DISTRO_KERNEL_MODULES = "kernel-module-dummy"
+# do we still need this?
+DISTRO_KERNEL_MODULES += "kernel-module-af-packet"
+# unused for now
+#DISTRO_KERNEL_MODULES += "kernel-module-netconsole"
+
+# these are listed separately because the are not needed
+# for boot, but are needed by reflash, etc.
+DISTRO_EXTRA_RDEPENDS += "diffutils cpio findutils"
+
+# pick up the fw_set/get env utils.
+DISTRO_EXTRA_RDEPENDS += "u-boot-utils"
+
+RDEPENDS = " kernel \
+ base-files \
+ base-passwd \
+ netbase \
+ busybox \
+ openprotium-init \
+ initscripts-openprotium \
+ update-modules \
+ module-init-tools \
+ modutils-initscripts \
+ ipkg-collateral ipkg ipkg-link \
+ portmap \
+ e2fsprogs-blkid \
+ mdadm \
+ hdparm \
+ mtd-utils \
+ ${DISTRO_SSH_DAEMON} \
+ ${DISTRO_DEV_MANAGER} \
+ ${DISTRO_INIT_MANAGER} \
+ ${DISTRO_LOGIN_MANAGER} \
+ ${DISTRO_KERNEL_MODULES} \
+ ${MACHINE_EXTRA_RDEPENDS} \
+ ${DISTRO_EXTRA_RDEPENDS} "
+
+RRECOMMENDS += " \
+ ${DISTRO_EXTRA_RRECOMMENDS} \
+ ${MACHINE_EXTRA_RRECOMMENDS}"
git.openpandora.org / openembedded.git / commitdiff