+++ /dev/null
-WLAN_VERSION=0
-WLAN_PATCHLEVEL=2
-WLAN_SUBLEVEL=2
-WLAN_EXTRAVERSION=
-#LINUX_SRC=$(KERNEL_SOURCE)
-PCMCIA_SRC=
-PREFIX=
-INST_EXEDIR=/sbin
-#TARGET_ROOT_ON_HOST=
-#RC_DIR=/etc/init.d
-PCMCIA_DIR=/etc/pcmcia
-SYSV_INIT=y
-INSTALL_DEPMOD=
-WLAN_DEBUG=n
-CROSS_COMPILE_ENABLED=n
-CROSS_COMPILE=
-HOST_COMPILE=
-PRISM2_PLX=y
-PRISM2_PCMCIA=y
-PRISM2_PCI=y
-PRISM2_USB=y
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- linux-wlan-ng-0.2.2/src/include/wlan/wlan_compat.h~might_sleep
-+++ linux-wlan-ng-0.2.2/src/include/wlan/wlan_compat.h
-@@ -584,7 +584,7 @@
- #endif
-
- #ifndef might_sleep
--#define might_sleep(a) do { } while (0)
-+#define might_sleep() do { } while (0)
- #endif
-
- /* Apparently 2.4.2 ethtool is quite different, maybe newer too? */
+++ /dev/null
---- linux-wlan-ng-0.2.2/src/prism2/driver/prism2_cs.c~ 2005-07-20 19:16:55.000000000 +0200
-+++ linux-wlan-ng-0.2.2/src/prism2/driver/prism2_cs.c 2005-09-01 19:02:59.099563318 +0200
-@@ -22,12 +22,16 @@
- * says.
- */
- #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) )
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
- #if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,5))
- static int numlist = 4;
- module_param_array(irq_list, int, numlist, 0444);
- #else
- module_param_array(irq_list, int, NULL, 0444);
- #endif
-+#else
-+MODULE_PARM( irq_list, "1-4i" );
-+#endif
- module_param( irq_mask, int, 0644);
- #endif
-
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- linux-wlan-ng-0.2.2/wlan_compat.h
-+++ /dev/null
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- linux-wlan-ng-0.2.2/src/prism2/driver/prism2_usb.c~msleep-vs-mdelay
-+++ linux-wlan-ng-0.2.2/src/prism2/driver/prism2_usb.c
-@@ -279,7 +279,7 @@
- * is "wake up", so that's easy.
- * (I'd like a better way to do this, really.)
- */
-- msleep(100);
-+ mdelay(100);
-
- /* Now delete the CTLXs, because no-one else can now. */
- list_for_each_safe(entry, temp, &cleanlist) {
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- linux-wlan-ng-0.2.1pre21/src/include/wlan/wlan_compat.h~no-compat
-+++ linux-wlan-ng-0.2.1pre21/src/include/wlan/wlan_compat.h
-@@ -351,14 +351,14 @@
-
- #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20))
- #ifdef _LINUX_LIST_H
--
-+/*
- static inline void list_move_tail(struct list_head *list,
- struct list_head *head)
- {
- __list_del(list->prev, list->next);
- list_add_tail(list, head);
- }
--
-+*/
- static inline void __list_splice(struct list_head *list,
- struct list_head *head)
- {
-@@ -372,13 +372,13 @@
- last->next = at;
- at->prev = last;
- }
--
-+/*
- static inline void list_move(struct list_head *list, struct list_head *head)
- {
- __list_del(list->prev, list->next);
- list_add(list, head);
- }
--
-+*/
- static inline void list_splice_init(struct list_head *list,
- struct list_head *head)
- {
-@@ -388,7 +388,6 @@
- }
- }
-
--
- #endif // LIST_H
- #endif
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- linux-wlan-ng-0.2.1-pre26/src/Makefile~only-the-modules.patch
-+++ linux-wlan-ng-0.2.1-pre26/src/Makefile
-@@ -44,10 +44,8 @@
-
- include ../config.mk
-
--DIRS=p80211 prism2 shared wlanctl wland nwepgen \
-- mkmeta wlancfg
--ALL_DIRS=mkmeta p80211 prism2 shared wlanctl wland \
-- nwepgen wlancfg
-+DIRS=p80211 prism2 shared mkmeta
-+ALL_DIRS=mkmeta p80211 prism2 shared
-
- ifneq ($(wildcard *.addon),)
- DIRS+=`cat *.addon`
---- linux-wlan-ng-0.2.1-pre26/src/prism2/Makefile~only-the-modules.patch
-+++ linux-wlan-ng-0.2.1-pre26/src/prism2/Makefile
-@@ -44,7 +44,7 @@
-
- include ../../config.mk
-
--DIRS=driver ridlist download
-+DIRS=driver ridlist
-
- ifneq ($(wildcard *.addon),)
- DIRS+=`cat *.addon`
+++ /dev/null
-DESCRIPTION = "linux-wlan-ng (prism2.x, prism3, pcmcia, pci, usb) driver for 11Mbps wireless lan cards"
-HOMEPAGE = "http://www.linux-wlan.org"
-SECTION = "kernel/modules"
-DEPENDS = "virtual/kernel"
-RRECOMMENDS = "wlan-ng-utils"
-LICENSE = "GPL"
-PR = "r1"
-
-# 0.2.1-pre works with the tosa internal wlan chipset, while 0.2.2 does not :/
-DEFAULT_PREFERENCE_tosa = "-1"
-
-SRC_URI = "ftp://ftp.linux-wlan.org/pub/linux-wlan-ng/linux-wlan-ng-${PV}.tar.bz2 \
- file://no-compat.patch;patch=1 \
- file://msleep-vs-mdelay.patch;patch=1 \
- file://might-sleep.patch;patch=1 \
- file://only-the-modules.patch;patch=1 \
- file://module_param_array.patch;patch=1 \
- file://scripts-makefile-hostcc.patch;patch=1 \
- file://pcmciasrc.patch;patch=1 \
- file://config.in"
-S = "${WORKDIR}/linux-wlan-ng-${PV}"
-
-inherit module
-
-PARALLEL_MAKE = ""
-EXTRA_OEMAKE = "CC="${KERNEL_CC}" LD=${KERNEL_LD} PARALLEL_MAKE=''"
-
-do_configure() {
- install -m 0655 ${WORKDIR}/config.in ${S}/config.in
- oe_runmake LINUX_SRC=${KERNEL_SOURCE} auto_config
-
- if grep CONFIG_PCMCIA=[ym] ${STAGING_KERNEL_DIR}/kernel-config; then
- echo "PRISM2_PCMCIA=y" >> config.mk
- echo "WLAN_KERN_PCMCIA=y" >> config.mk
- fi
- echo "TARGET_ROOT_ON_HOST=${D}/" >> config.mk
- echo "TARGET_MODDIR=${D}/lib/modules/${KERNEL_VERSION}/wlan-ng" >> config.mk
- echo "CC=${KERNEL_CC}" >> config.mk
- echo "LD=${KERNEL_LD}" >> config.mk
- echo "LDFLAGS=" >> config.mk
-
- # Listen closely... sssshhh... can you hear the wlan-ng build system suck?
- rm -f ${KERNEL_SOURCE}/../config.mk
- rm -f ${KERNEL_SOURCE}/../../config.mk
- ln -sf ${S}/config.mk ${KERNEL_SOURCE}/..
- ln -sf ${S}/config.mk ${KERNEL_SOURCE}/../..
- install -m 0655 config.mk src/prism2/config.mk
- install -d src/prism2/driver/include
- ln -sf ${S}/src/include/wlan src/prism2/driver/include/wlan
- ln -sf ${S}/src/prism2/include/prism2 src/prism2/driver/include/prism2
-}
-
-do_compile() {
- oe_runmake -C src all
-}
-
-do_install() {
- oe_runmake install DESTDIR=${D}
-
- # Listen closely... sssshhh... can you hear the wlan-ng build system suck?
- rm -f ${KERNEL_SOURCE}/../config.mk
- rm -f ${KERNEL_SOURCE}/../../config.mk
-}
-
-FILES_${PN} = "/lib"
+++ /dev/null
-DESCRIPTION = "linux-wlan-ng userland utilities"
-HOMEPAGE = "http://www.linux-wlan.org"
-SECTION = "kernel/userland"
-DEPENDS = "virtual/kernel"
-LICENSE = "GPL"
-PR = "r0"
-
-SRC_URI = "ftp://ftp.linux-wlan.org/pub/linux-wlan-ng/linux-wlan-ng-${PV}.tar.bz2 \
- file://only-the-utils.patch;patch=1 \
- file://scripts-makefile-hostcc.patch;patch=1 \
- file://pcmciasrc.patch;patch=1 \
- file://wlan-ng.modutils \
- file://wlan.agent \
- file://usbctl \
- file://resume \
- file://pre-up \
- file://post-down \
- file://config.in"
-S = "${WORKDIR}/linux-wlan-ng-${PV}"
-
-# yeah, it's kind of backwards, but otherwise the config step will fail
-inherit module
-
-do_configure() {
- install -m 0655 ${WORKDIR}/config.in ${S}/config.in
- oe_runmake LINUX_SRC=${KERNEL_SOURCE} auto_config
-
- if grep CONFIG_PCMCIA=[ym] ${STAGING_KERNEL_DIR}/kernel-config; then
- echo "PRISM2_PCMCIA=y" >> config.mk
- echo "WLAN_KERN_PCMCIA=y" >> config.mk
- fi
- echo "TARGET_ROOT_ON_HOST=${D}/" >> config.mk
- echo "FIRMWARE_DIR=/etc/wlan" >> config.mk
- echo "TARGET_MODDIR=${D}/lib/modules/${KERNEL_VERSION}/wlan-ng" >> config.mk
- echo "TARGET_INST_EXEDIR=${D}/sbin" >> config.mk
- echo "RC_DIR=${sysconfdir}/" >> config.mk
- echo "CC=${CC}" >> config.mk
- echo "LD=${LD}" >> config.mk
-
- # Shut up, you broken buildsystem
- install -m 0655 config.mk src/prism2/config.mk
- install -d src/prism2/driver/include
- ln -sf ${S}/src/include/wlan src/prism2/driver/include/wlan
- ln -sf ${S}/src/prism2/include/prism2 src/prism2/driver/include/prism2
-}
-
-do_compile() {
- oe_runmake all
-}
-
-do_install() {
- oe_runmake install
- mkdir -p ${D}${sysconfdir}/modutils/
- mkdir -p ${D}${sysconfdir}/hotplug/
- mkdir -p ${D}${base_sbindir}/
- install -m 0644 ${WORKDIR}/wlan-ng.modutils ${D}${sysconfdir}/modutils/wlan-ng.conf
- install -m 0755 ${WORKDIR}/wlan.agent ${D}${sysconfdir}/hotplug/wlan.agent
- install -d ${D}${sysconfdir}/network/if-pre-up.d
- install -m 0755 ${WORKDIR}/pre-up ${D}${sysconfdir}/network/if-pre-up.d/wlan-ng
- install -d ${D}${sysconfdir}/network/if-post-down.d
- install -m 0755 ${WORKDIR}/post-down ${D}${sysconfdir}/network/if-post-down.d/wlan-ng
- install -d ${D}${sysconfdir}/apm/resume.d
- install -m 0755 ${WORKDIR}/resume ${D}${sysconfdir}/apm/resume.d/wlan-ng
- install -m 0755 ${WORKDIR}/usbctl ${D}${base_sbindir}/usbctl
- install -d ${D}${mandir}
-}
-
-FILES_${PN} = "/etc /sbin"
git.openpandora.org / openembedded.git / commitdiff