sunxi: H616: remove default AXP305 selection

The original H616 devices released about three years ago were typically
paired with an X-Powers AXP305 PMIC. Newer devices uses the smaller
AXP313, and there seem to be far more systems with this PMIC around now.

Remove the default AXP305 selection for the H616 SoC from the Kconfig,
and move the PMIC selection into the board defconfig files instead.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig
index 50009e8..98aed84 100644 (file)
--- a/configs/orangepi_zero2_defconfig
+++ b/configs/orangepi_zero2_defconfig
@@ -20,6 +20,7 @@ CONFIG_SYS_I2C_SPEED=400000
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_AXP305_POWER=y
 CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y

diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig
index 318951e..e805e09 100644 (file)
--- a/configs/x96_mate_defconfig
+++ b/configs/x96_mate_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
+CONFIG_AXP305_POWER=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 2395720..33b8bc1 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -56,7 +56,6 @@ choice
        depends on ARCH_SUNXI
        default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
        default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
-       default AXP305_POWER if MACH_SUN50I_H616
        default AXP818_POWER if MACH_SUN8I_A83T
        default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S