arm64: zynqmp: Remove mkimage fit script

Platform has been switched to binman that's why there is no need for this
script and also Kconfig symbols.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/cf438091e43c4c9d535a9cfa2886673aa42a4370.1730452668.git.michal.simek@amd.com

diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
deleted file mode 100755 (executable)
index cdecb1c..0000000
--- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
+++ /dev/null
@@ -1,240 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-#
-# script to generate FIT image source for Xilinx ZynqMP boards with
-# ARM Trusted Firmware and multiple device trees (given on the command line)
-#
-# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
-
-BL33="u-boot-nodtb.bin"
-[ -z "$BL31" ] && BL31="bl31.bin"
-BL31_ELF="${BL31%.*}.elf"
-[ -f ${BL31_ELF} ] && ATF_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL31_ELF}" | \
-awk '/Entry point/ { print $3 }'`
-
-[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0xfffea000"
-ATF_LOAD_ADDR_LOW=`printf 0x%x $((ATF_LOAD_ADDR & 0xffffffff))`
-ATF_LOAD_ADDR_HIGH=`printf 0x%x $((ATF_LOAD_ADDR >> 32))`
-
-[ -z "$BL32" ] && BL32="tee.bin"
-BL32_ELF="${BL32%.*}.elf"
-[ -f ${BL32_ELF} ] && TEE_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL32_ELF}" | \
-awk '/Entry point/ { print $3 }'`
-
-[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0x60000000"
-TEE_LOAD_ADDR_LOW=`printf 0x%x $((TEE_LOAD_ADDR & 0xffffffff))`
-TEE_LOAD_ADDR_HIGH=`printf 0x%x $((TEE_LOAD_ADDR >> 32))`
-
-if [ -z "$BL33_LOAD_ADDR" ];then
-       BL33_LOAD_ADDR=`awk '/CONFIG_TEXT_BASE/ { print $3 }' include/generated/autoconf.h`
-fi
-BL33_LOAD_ADDR_LOW=`printf 0x%x $((BL33_LOAD_ADDR & 0xffffffff))`
-BL33_LOAD_ADDR_HIGH=`printf 0x%x $((BL33_LOAD_ADDR >> 32))`
-
-DTB_LOAD_ADDR=`awk '/CONFIG_XILINX_OF_BOARD_DTB_ADDR/ { print $3 }' include/generated/autoconf.h`
-if [ ! -z "$DTB_LOAD_ADDR" ]; then
-       DTB_LOAD_ADDR_LOW=`printf 0x%x $((DTB_LOAD_ADDR & 0xffffffff))`
-       DTB_LOAD_ADDR_HIGH=`printf 0x%x $((DTB_LOAD_ADDR >> 32))`
-       DTB_LOAD="load = <$DTB_LOAD_ADDR_HIGH $DTB_LOAD_ADDR_LOW>;"
-else
-       DTB_LOAD=""
-fi
-
-if [ -z "$*" ]; then
-       DT=arch/arm/dts/${DEVICE_TREE}.dtb
-else
-       DT=$*
-fi
-
-if [ ! -f $BL31 ]; then
-       echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2
-       BL31=/dev/null
-fi
-
-cat << __HEADER_EOF
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-/dts-v1/;
-
-/ {
-       description = "Configuration for Xilinx ZynqMP SoC";
-
-       images {
-               uboot {
-                       description = "U-Boot (64-bit)";
-                       data = /incbin/("$BL33");
-                       type = "firmware";
-                       os = "u-boot";
-                       arch = "arm64";
-                       compression = "none";
-                       load = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
-                       entry = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
-                       hash {
-                               algo = "md5";
-                       };
-               };
-__HEADER_EOF
-
-if [ -f $BL31 ]; then
-cat << __ATF
-               atf {
-                       description = "Trusted Firmware-A";
-                       data = /incbin/("$BL31");
-                       type = "firmware";
-                       os = "arm-trusted-firmware";
-                       arch = "arm64";
-                       compression = "none";
-                       load = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
-                       entry = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
-                       hash {
-                               algo = "md5";
-                       };
-               };
-__ATF
-fi
-
-if [ -f $BL32 ]; then
-cat << __TEE
-               tee {
-                       description = "TEE firmware";
-                       data = /incbin/("$BL32");
-                       type = "firmware";
-                       os = "tee";
-                       arch = "arm64";
-                       compression = "none";
-                       load = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
-                       entry = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
-                       hash {
-                               algo = "md5";
-                       };
-               };
-__TEE
-fi
-
-MULTI_DTB=`awk '/CONFIG_MULTI_DTB_FIT / { print $3 }' include/generated/autoconf.h`
-
-if [ 1"$MULTI_DTB" -eq 11 ]; then
-       cat << __FDT_IMAGE_EOF
-               fdt_1 {
-                       description = "Multi DTB fit image";
-                       data = /incbin/("fit-dtb.blob");
-                       type = "flat_dt";
-                       arch = "arm64";
-                       compression = "none";
-                       $DTB_LOAD
-                       hash {
-                               algo = "md5";
-                       };
-               };
-       };
-       configurations {
-               default = "config_1";
-__FDT_IMAGE_EOF
-
-if [ ! -f $BL31 ]; then
-cat << __CONF_SECTION1_EOF
-               config_1 {
-                       description = "Multi DTB without TF-A";
-                       firmware = "uboot";
-                       loadables = "fdt_1";
-               };
-__CONF_SECTION1_EOF
-else
-if [ -f $BL32 ]; then
-cat << __CONF_SECTION1_EOF
-               config_1 {
-                       description = "Multi DTB with TF-A and TEE";
-                       firmware = "atf";
-                       loadables = "uboot", "tee", "fdt_1";
-               };
-__CONF_SECTION1_EOF
-else
-cat << __CONF_SECTION1_EOF
-               config_1 {
-                       description = "Multi DTB with TF-A";
-                       firmware = "atf";
-                       loadables = "uboot", "fdt_1";
-               };
-__CONF_SECTION1_EOF
-fi
-fi
-
-cat << __ITS_EOF
-       };
-};
-__ITS_EOF
-
-else
-
-DEFAULT=1
-cnt=1
-for dtname in $DT
-do
-       cat << __FDT_IMAGE_EOF
-               fdt_$cnt {
-                       description = "$(basename $dtname .dtb)";
-                       data = /incbin/("$dtname");
-                       type = "flat_dt";
-                       arch = "arm64";
-                       compression = "none";
-                       $DTB_LOAD
-                       hash {
-                               algo = "md5";
-                       };
-               };
-__FDT_IMAGE_EOF
-
-[ "x$(basename $dtname .dtb)" = "x${DEVICE_TREE}" ] && DEFAULT=$cnt
-
-cnt=$((cnt+1))
-done
-
-cat << __CONF_HEADER_EOF
-       };
-       configurations {
-               default = "config_$DEFAULT";
-
-__CONF_HEADER_EOF
-
-cnt=1
-for dtname in $DT
-do
-if [ ! -f $BL31 ]; then
-cat << __CONF_SECTION1_EOF
-               config_$cnt {
-                       description = "$(basename $dtname .dtb)";
-                       firmware = "uboot";
-                       fdt = "fdt_$cnt";
-               };
-__CONF_SECTION1_EOF
-else
-if [ -f $BL32 ]; then
-cat << __CONF_SECTION1_EOF
-               config_$cnt {
-                       description = "$(basename $dtname .dtb)";
-                       firmware = "atf";
-                       loadables = "uboot", "tee";
-                       fdt = "fdt_$cnt";
-               };
-__CONF_SECTION1_EOF
-else
-cat << __CONF_SECTION1_EOF
-               config_$cnt {
-                       description = "$(basename $dtname .dtb)";
-                       firmware = "atf";
-                       loadables = "uboot";
-                       fdt = "fdt_$cnt";
-               };
-__CONF_SECTION1_EOF
-fi
-fi
-
-cnt=$((cnt+1))
-done
-
-cat << __ITS_EOF
-       };
-};
-__ITS_EOF
-
-fi

diff --git a/boot/Kconfig b/boot/Kconfig
index 661e89c..2d699e1 100644 (file)
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -291,7 +291,6 @@ config USE_SPL_FIT_GENERATOR
 config SPL_FIT_GENERATOR
        string ".its file generator script for U-Boot FIT image"
        depends on USE_SPL_FIT_GENERATOR
-       default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
        help
          Specifies a (platform specific) script file to generate the FIT
          source file used to build the U-Boot FIT image file. This gets