spi: sun4i: Simplify reg writes using set/clrbits_le32
authorJagan Teki <jagan@amarulasolutions.com>
Wed, 27 Feb 2019 14:32:07 +0000 (20:02 +0530)
committerJagan Teki <jagan@amarulasolutions.com>
Mon, 4 Mar 2019 12:38:56 +0000 (18:08 +0530)
Update the existing register writes using setbits_le32 and
clrbits_le32 in required places.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
drivers/spi/sun4i_spi.c

index f5f2d56..0b16630 100644 (file)
@@ -283,20 +283,18 @@ static int sun4i_spi_claim_bus(struct udevice *dev)
 {
        struct sun4i_spi_priv *priv = dev_get_priv(dev->parent);
 
-       writel(SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP |
-              SUN4I_CTL_CS_MANUAL | SUN4I_CTL_CS_ACTIVE_LOW,
-              &priv->regs->ctl);
+       setbits_le32(&priv->regs->ctl, SUN4I_CTL_ENABLE |
+                    SUN4I_CTL_MASTER | SUN4I_CTL_TP |
+                    SUN4I_CTL_CS_MANUAL | SUN4I_CTL_CS_ACTIVE_LOW);
+
        return 0;
 }
 
 static int sun4i_spi_release_bus(struct udevice *dev)
 {
        struct sun4i_spi_priv *priv = dev_get_priv(dev->parent);
-       u32 reg;
 
-       reg = readl(&priv->regs->ctl);
-       reg &= ~SUN4I_CTL_ENABLE;
-       writel(reg, &priv->regs->ctl);
+       clrbits_le32(&priv->regs->ctl, SUN4I_CTL_ENABLE);
 
        return 0;
 }
@@ -309,7 +307,7 @@ static int sun4i_spi_xfer(struct udevice *dev, unsigned int bitlen,
        struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
 
        u32 len = bitlen / 8;
-       u32 reg, rx_fifocnt;
+       u32 rx_fifocnt;
        u8 nbytes;
        int ret;
 
@@ -324,10 +322,8 @@ static int sun4i_spi_xfer(struct udevice *dev, unsigned int bitlen,
        if (flags & SPI_XFER_BEGIN)
                sun4i_spi_set_cs(bus, slave_plat->cs, true);
 
-       reg = readl(&priv->regs->ctl);
-
        /* Reset FIFOs */
-       writel(reg | SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST, &priv->regs->ctl);
+       setbits_le32(&priv->regs->ctl, SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST);
 
        while (len) {
                /* Setup the transfer now... */
@@ -341,8 +337,7 @@ static int sun4i_spi_xfer(struct udevice *dev, unsigned int bitlen,
                sun4i_spi_fill_fifo(priv, nbytes);
 
                /* Start the transfer */
-               reg = readl(&priv->regs->ctl);
-               writel(reg | SUN4I_CTL_XCH, &priv->regs->ctl);
+               setbits_le32(&priv->regs->ctl, SUN4I_CTL_XCH);
 
                /* Wait till RX FIFO to be empty */
                ret = readl_poll_timeout(&priv->regs->fifo_sta, rx_fifocnt,