at91: Remove unused LED code

These LED files (and CONFIG values) are unused today, remove the code in
question.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile
index c1904d5..f306b17 100644 (file)
--- a/arch/arm/mach-at91/arm926ejs/Makefile
+++ b/arch/arm/mach-at91/arm926ejs/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_AT91SAM9N12)     += at91sam9n12_devices.o
 obj-$(CONFIG_AT91SAM9X5)       += at91sam9x5_devices.o
 obj-$(CONFIG_SAM9X60)          += sam9x60_devices.o
 obj-$(CONFIG_AT91_EFLASH)      += eflash.o
-obj-$(CONFIG_AT91_LED) += led.o
 obj-y += clock.o
 obj-y += cpu.o
 obj-y  += reset.o

diff --git a/arch/arm/mach-at91/arm926ejs/led.c b/arch/arm/mach-at91/arm926ejs/led.c
deleted file mode 100644 (file)
index de24db1..0000000
--- a/arch/arm/mach-at91/arm926ejs/led.c
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/arch/gpio.h>
-#include <status_led.h>
-
-#ifdef CONFIG_RED_LED
-void red_led_on(void)
-{
-       gpio_set_value(CONFIG_RED_LED, 1);
-}
-
-void red_led_off(void)
-{
-       gpio_set_value(CONFIG_RED_LED, 0);
-}
-#endif
-
-#ifdef CONFIG_GREEN_LED
-void green_led_on(void)
-{
-       gpio_set_value(CONFIG_GREEN_LED, 0);
-}
-
-void green_led_off(void)
-{
-       gpio_set_value(CONFIG_GREEN_LED, 1);
-}
-#endif
-
-#ifdef CONFIG_YELLOW_LED
-void yellow_led_on(void)
-{
-       gpio_set_value(CONFIG_YELLOW_LED, 0);
-}
-
-void yellow_led_off(void)
-{
-       gpio_set_value(CONFIG_YELLOW_LED, 1);
-}
-#endif

diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile
index 56cac97..0f17296 100644 (file)
--- a/board/atmel/at91sam9260ek/Makefile
+++ b/board/atmel/at91sam9260ek/Makefile
@@ -8,4 +8,3 @@
 # Lead Tech Design <www.leadtechdesign.com>
 
 obj-y  += at91sam9260ek.o
-obj-$(CONFIG_AT91_LED) += led.o

diff --git a/board/atmel/at91sam9260ek/led.c b/board/atmel/at91sam9260ek/led.c
deleted file mode 100644 (file)
index cc6d5d7..0000000
--- a/board/atmel/at91sam9260ek/led.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-#include <status_led.h>
-
-void coloured_LED_init(void)
-{
-       /* Clock is enabled in board_early_init_f() */
-       at91_set_gpio_output(CONFIG_RED_LED, 1);
-       at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-
-       at91_set_gpio_value(CONFIG_RED_LED, 0);
-       at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-}

diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile
index 7f5369f..de34666 100644 (file)
--- a/board/atmel/at91sam9261ek/Makefile
+++ b/board/atmel/at91sam9261ek/Makefile
@@ -8,4 +8,3 @@
 # Lead Tech Design <www.leadtechdesign.com>
 
 obj-y += at91sam9261ek.o
-obj-$(CONFIG_AT91_LED) += led.o

diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c
deleted file mode 100644 (file)
index a1aab98..0000000
--- a/board/atmel/at91sam9261ek/led.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <asm/io.h>
-
-void coloured_LED_init(void)
-{
-       /* Enable clock */
-       at91_periph_clk_enable(ATMEL_ID_PIOA);
-
-       at91_set_gpio_output(CONFIG_RED_LED, 1);
-       at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-       at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
-       at91_set_gpio_value(CONFIG_RED_LED, 0);
-       at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-       at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
-}

diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile
index 44c8d95..57ad36f 100644 (file)
--- a/board/atmel/at91sam9263ek/Makefile
+++ b/board/atmel/at91sam9263ek/Makefile
@@ -8,4 +8,3 @@
 # Lead Tech Design <www.leadtechdesign.com>
 
 obj-y += at91sam9263ek.o
-obj-$(CONFIG_AT91_LED) += led.o

diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c
deleted file mode 100644 (file)
index 849501e..0000000
--- a/board/atmel/at91sam9263ek/led.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/clk.h>
-
-void coloured_LED_init(void)
-{
-       at91_periph_clk_enable(ATMEL_ID_PIOB);
-       at91_periph_clk_enable(ATMEL_ID_PIOB);
-
-       at91_set_gpio_output(CONFIG_RED_LED, 1);
-       at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-       at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
-       at91_set_gpio_value(CONFIG_RED_LED, 0);
-       at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-       at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
-}

diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile
index b05b81b..c17719e 100644 (file)
--- a/board/atmel/at91sam9m10g45ek/Makefile
+++ b/board/atmel/at91sam9m10g45ek/Makefile
@@ -8,4 +8,3 @@
 # Lead Tech Design <www.leadtechdesign.com>
 
 obj-y += at91sam9m10g45ek.o
-obj-(CONFIG_AT91_LED) += led.o

diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c
deleted file mode 100644 (file)
index f44a096..0000000
--- a/board/atmel/at91sam9m10g45ek/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/io.h>
-#include <asm/arch/at91sam9g45.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-
-void coloured_LED_init(void)
-{
-       at91_periph_clk_enable(ATMEL_ID_PIODE);
-
-       at91_set_gpio_output(CONFIG_RED_LED, 1);
-       at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-
-       at91_set_gpio_value(CONFIG_RED_LED, 0);
-       at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-}

diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile
index 30dcb49..96e246d 100644 (file)
--- a/board/atmel/at91sam9rlek/Makefile
+++ b/board/atmel/at91sam9rlek/Makefile
@@ -8,4 +8,3 @@
 # Lead Tech Design <www.leadtechdesign.com>
 
 obj-y += at91sam9rlek.o
-obj-$(CONFIG_AT91_LED) += led.o

diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c
deleted file mode 100644 (file)
index 6dd19ae..0000000
--- a/board/atmel/at91sam9rlek/led.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-
-void coloured_LED_init(void)
-{
-       at91_periph_clk_enable(ATMEL_ID_PIOD);
-
-       at91_set_gpio_output(CONFIG_RED_LED, 1);
-       at91_set_gpio_output(CONFIG_GREEN_LED, 1);
-       at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
-       at91_set_gpio_value(CONFIG_RED_LED, 0);
-       at91_set_gpio_value(CONFIG_GREEN_LED, 1);
-       at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
-}

diff --git a/board/ronetix/pm9261/Makefile b/board/ronetix/pm9261/Makefile
index 9fa3dfb..70e1971 100644 (file)
--- a/board/ronetix/pm9261/Makefile
+++ b/board/ronetix/pm9261/Makefile
@@ -9,4 +9,3 @@
 # Ilko Iliev <www.ronetix.at>
 
 obj-y += pm9261.o
-obj-$(CONFIG_RED_LED) += led.o

diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c
deleted file mode 100644 (file)
index df95583..0000000
--- a/board/ronetix/pm9261/led.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- * Ilko Iliev <www.ronetix.at>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/gpio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-
-void coloured_LED_init(void)
-{
-       at91_periph_clk_enable(ATMEL_ID_PIOC);
-
-       gpio_direction_output(CONFIG_RED_LED, 1);
-       gpio_direction_output(CONFIG_GREEN_LED, 1);
-       gpio_direction_output(CONFIG_YELLOW_LED, 1);
-
-       gpio_set_value(CONFIG_RED_LED, 0);
-       gpio_set_value(CONFIG_GREEN_LED, 1);
-       gpio_set_value(CONFIG_YELLOW_LED, 1);
-}

diff --git a/board/ronetix/pm9263/Makefile b/board/ronetix/pm9263/Makefile
index e81c57e..5ad595d 100644 (file)
--- a/board/ronetix/pm9263/Makefile
+++ b/board/ronetix/pm9263/Makefile
@@ -9,4 +9,3 @@
 # Ilko Iliev <www.ronetix.at>
 
 obj-y += pm9263.o
-obj-$(CONFIG_AT91_LED) += led.o

diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c
deleted file mode 100644 (file)
index 524b4af..0000000
--- a/board/ronetix/pm9263/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- * Ilko Iliev <www.ronetix.at>
- */
-
-#include <common.h>
-#include <status_led.h>
-#include <asm/gpio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-
-void coloured_LED_init(void)
-{
-       at91_periph_clk_enable(ATMEL_ID_PIOB);
-
-       gpio_direction_output(CONFIG_RED_LED, 1);
-       gpio_direction_output(CONFIG_GREEN_LED, 1);
-
-       gpio_set_value(CONFIG_RED_LED, 0);
-       gpio_set_value(CONFIG_GREEN_LED, 1);
-}

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index aca7870..e4e15f9 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -47,10 +47,6 @@
 /* setting board specific options */
 #define CONFIG_SYS_AUTOLOAD "yes"
 
-/* The LED PINs */
-#define CONFIG_RED_LED                 AT91_PIN_PA9
-#define CONFIG_GREEN_LED               AT91_PIN_PA6
-
 /*
  * SDRAM: 1 bank, 64 MB, base address 0x20000000
  * Already initialized before u-boot gets started.