sunxi: Enable PMIC drivevbus regulator support for USB supplies

On many boards, the USB ports are powered by the PMIC's "drivevbus"
regulator. In preparation for switching the USB PHY driver to use the
regulator uclass instead of a virtual GPIO pin, ensure these boards
have AXP PMIC regulator support enabled.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig
index df4acaf..705c869 100644 (file)
--- a/configs/A33-OLinuXino_defconfig
+++ b/configs/A33-OLinuXino_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PB2"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y

diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
index d3678ad..c8adabe 100644 (file)
--- a/configs/Cubieboard4_defconfig
+++ b/configs/Cubieboard4_defconfig
@@ -11,5 +11,6 @@ CONFIG_USB1_VBUS_PIN="PH14"
 CONFIG_USB3_VBUS_PIN="PH15"
 CONFIG_AXP_GPIO=y
 CONFIG_SYS_I2C_SUN8I_RSB=y
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP809_POWER=y

diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
index 29f4df2..f349d9b 100644 (file)
--- a/configs/Cubietruck_plus_defconfig
+++ b/configs/Cubietruck_plus_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO3_VOLT=2500
 CONFIG_AXP_DLDO4_VOLT=3300

diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index d60eedb..709d27d 100644 (file)
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -12,6 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set

diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index a26677e..c7a3af7 100644 (file)
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -11,5 +11,6 @@ CONFIG_USB1_VBUS_PIN="PH4"
 CONFIG_USB3_VBUS_PIN="PH5"
 CONFIG_AXP_GPIO=y
 CONFIG_SYS_I2C_SUN8I_RSB=y
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP809_POWER=y

diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index ad41dbd..fcdd7de 100644 (file)
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -17,6 +17,7 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_INITIAL_USB_SCAN_DELAY=500
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DCDC5_VOLT=1200
 CONFIG_AXP_DLDO3_VOLT=3300

diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig
index de69ebe..67fef2a 100644 (file)
--- a/configs/Yones_Toptech_BS1078_V2_defconfig
+++ b/configs/Yones_Toptech_BS1078_V2_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y

diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig
index 07bda04..201b742 100644 (file)
--- a/configs/colorfly_e708_q1_defconfig
+++ b/configs/colorfly_e708_q1_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_AXP_DLDO2_VOLT=1800

diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 935071d..5d08374 100644 (file)
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig
index 205eab2..6502ac8 100644 (file)
--- a/configs/gt90h_v4_defconfig
+++ b/configs/gt90h_v4_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig
index ed6a603..70be980 100644 (file)
--- a/configs/iNet_D978_rev2_defconfig
+++ b/configs/iNet_D978_rev2_defconfig
@@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set

diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig
index d215a83..3405bc4 100644 (file)
--- a/configs/inet86dz_defconfig
+++ b/configs/inet86dz_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig
index 24ff6c0..a70a83e 100644 (file)
--- a/configs/inet_q972_defconfig
+++ b/configs/inet_q972_defconfig
@@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y

diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig
index 6ec7c83..2155fe6 100644 (file)
--- a/configs/polaroid_mid2407pxe03_defconfig
+++ b/configs/polaroid_mid2407pxe03_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig
index 1aefc50..1faf78f 100644 (file)
--- a/configs/polaroid_mid2809pxe04_defconfig
+++ b/configs/polaroid_mid2809pxe04_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig
index 0f8c30e..08ba34e 100644 (file)
--- a/configs/q8_a23_tablet_800x480_defconfig
+++ b/configs/q8_a23_tablet_800x480_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig
index b3b5cc7..6efbd84 100644 (file)
--- a/configs/q8_a33_tablet_1024x600_defconfig
+++ b/configs/q8_a33_tablet_1024x600_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig
index 37ee08f..bf5dcd0 100644 (file)
--- a/configs/q8_a33_tablet_800x480_defconfig
+++ b/configs/q8_a33_tablet_800x480_defconfig
@@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5

diff --git a/configs/tbs_a711_defconfig b/configs/tbs_a711_defconfig
index 9a70b6b..c178153 100644 (file)
--- a/configs/tbs_a711_defconfig
+++ b/configs/tbs_a711_defconfig
@@ -13,6 +13,7 @@ CONFIG_USB0_ID_DET="PH11"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_REGULATOR_AXP_DRIVEVBUS=y
 CONFIG_REGULATOR_AXP_USB_POWER=y
 CONFIG_AXP_DCDC5_VOLT=1200
 CONFIG_USB_EHCI_HCD=y