netbase: use static IP for eth0 on ronetix boards

diff --git a/packages/netbase/netbase/ronetix-pm9261/interfaces b/packages/netbase/netbase/ronetix-pm9261/interfaces
new file mode 100644 (file)
index 0000000..ab20f5b
--- /dev/null
+++ b/packages/netbase/netbase/ronetix-pm9261/interfaces
@@ -0,0 +1,72 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+# Wireless interfaces
+#
+# Example of an unencrypted (no WEP or WPA) wireless connection
+# that connects to any available access point:
+#
+iface wlan0 inet dhcp
+       wireless_mode managed
+       wireless_essid any
+#
+#
+# Same as above but locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#      wireless_mode managed
+#      wireless-essid some-essid
+#
+# A WEP encrypted connection locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#      wireless-essid some-essid
+#      wireless-key s:My-PlainText-Password
+#      wireless-mode managed                  
+#
+# A WPA1 or WPA2 encrypted connection locked to a specific access point.
+# This is the best option for non-roaming, single-network usage.
+# Note that your card may require a firmware update to use WPA. 
+# Some distributions install a temporary volatile firmware update on ifup.
+#
+#iface wlan0 inet dhcp                                                   
+#      wpa-essid some-essid                                          
+#      wpa-psk My-PlainText-Password                                              
+#
+# A WPA1 or WPA2 encrypted connection using an external configuration file
+# for wpa-supplicant. This is the way to go if you need to configure multiple
+# networks with different keys and / or WPA settings and roaming support.
+#
+# iface wlan0 inet dhcp
+#    wpa-conf /etc/wpa_supplicant.conf
+#    wpa-driver hostap
+
+
+
+iface atml0 inet dhcp
+
+# Wired or wireless interfaces
+auto eth0
+iface eth0 inet static
+       address 192.168.0.184
+       netmask 255.255.255.0
+       network 192.168.0.0
+       gateway 192.168.0.1
+
+iface eth1 inet dhcp
+
+# Ethernet/RNDIS gadget (g_ether)
+# ... or on host side, usbnet and random hwaddr
+iface usb0 inet static
+       address 192.168.0.202
+       netmask 255.255.255.0
+       network 192.168.0.0
+       gateway 192.168.0.200
+
+# Bluetooth networking
+iface bnep0 inet dhcp
+

diff --git a/packages/netbase/netbase/ronetix-pm9263/interfaces b/packages/netbase/netbase/ronetix-pm9263/interfaces
new file mode 100644 (file)
index 0000000..ab20f5b
--- /dev/null
+++ b/packages/netbase/netbase/ronetix-pm9263/interfaces
@@ -0,0 +1,72 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+# Wireless interfaces
+#
+# Example of an unencrypted (no WEP or WPA) wireless connection
+# that connects to any available access point:
+#
+iface wlan0 inet dhcp
+       wireless_mode managed
+       wireless_essid any
+#
+#
+# Same as above but locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#      wireless_mode managed
+#      wireless-essid some-essid
+#
+# A WEP encrypted connection locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#      wireless-essid some-essid
+#      wireless-key s:My-PlainText-Password
+#      wireless-mode managed                  
+#
+# A WPA1 or WPA2 encrypted connection locked to a specific access point.
+# This is the best option for non-roaming, single-network usage.
+# Note that your card may require a firmware update to use WPA. 
+# Some distributions install a temporary volatile firmware update on ifup.
+#
+#iface wlan0 inet dhcp                                                   
+#      wpa-essid some-essid                                          
+#      wpa-psk My-PlainText-Password                                              
+#
+# A WPA1 or WPA2 encrypted connection using an external configuration file
+# for wpa-supplicant. This is the way to go if you need to configure multiple
+# networks with different keys and / or WPA settings and roaming support.
+#
+# iface wlan0 inet dhcp
+#    wpa-conf /etc/wpa_supplicant.conf
+#    wpa-driver hostap
+
+
+
+iface atml0 inet dhcp
+
+# Wired or wireless interfaces
+auto eth0
+iface eth0 inet static
+       address 192.168.0.184
+       netmask 255.255.255.0
+       network 192.168.0.0
+       gateway 192.168.0.1
+
+iface eth1 inet dhcp
+
+# Ethernet/RNDIS gadget (g_ether)
+# ... or on host side, usbnet and random hwaddr
+iface usb0 inet static
+       address 192.168.0.202
+       netmask 255.255.255.0
+       network 192.168.0.0
+       gateway 192.168.0.200
+
+# Bluetooth networking
+iface bnep0 inet dhcp
+