OMAP3 pandora: setup pulls for various GPIOs

Set pullups or pulldowns for GPIOs which need them.
Disable them for others, which have external pulls.
Also make disabled pull setting consistent (some pins had
type set to "up" even if pull type selection was disabled).

diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index 1bd3d30..dfaf32f 100644 (file)
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -145,26 +145,26 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(DSS_DATA22),       (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
  MUX_VAL(CP(DSS_DATA23),       (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
  /*GPIO based game buttons*/\
- MUX_VAL(CP(CAM_XCLKA),                (IEN  | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\
- MUX_VAL(CP(CAM_PCLK),         (IEN  | PTU | DIS | M4)) /*GPIO_97 - L2*/\
- MUX_VAL(CP(CAM_FLD),          (IEN  | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\
- MUX_VAL(CP(CAM_D0),           (IEN  | PTU | DIS | M4)) /*GPIO_99 - MENU*/\
- MUX_VAL(CP(CAM_D1),           (IEN  | PTU | DIS | M4)) /*GPIO_100 - START*/\
- MUX_VAL(CP(CAM_D2),           (IEN  | PTU | DIS | M4)) /*GPIO_101 - Y*/\
- MUX_VAL(CP(CAM_D3),           (IEN  | PTU | DIS | M4)) /*GPIO_102 - L1*/\
- MUX_VAL(CP(CAM_D4),           (IEN  | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\
- MUX_VAL(CP(CAM_D5),           (IEN  | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\
- MUX_VAL(CP(CAM_D6),           (IEN  | PTU | DIS | M4)) /*GPIO_105 - R1*/\
- MUX_VAL(CP(CAM_D7),           (IEN  | PTU | DIS | M4)) /*GPIO_106 - B*/\
- MUX_VAL(CP(CAM_D8),           (IEN  | PTU | DIS | M4)) /*GPIO_107 - R2*/\
- MUX_VAL(CP(CAM_D10),          (IEN  | PTU | DIS | M4)) /*GPIO_109 - X*/\
- MUX_VAL(CP(CAM_D11),          (IEN  | PTU | DIS | M4)) /*GPIO_110 - UP*/\
- MUX_VAL(CP(CAM_XCLKB),                (IEN  | PTU | DIS | M4)) /*GPIO_111 - A*/\
+ MUX_VAL(CP(CAM_XCLKA),                (IEN  | PTD | DIS | M4)) /*GPIO_96 - LEFT*/\
+ MUX_VAL(CP(CAM_PCLK),         (IEN  | PTD | DIS | M4)) /*GPIO_97 - L2*/\
+ MUX_VAL(CP(CAM_FLD),          (IEN  | PTD | DIS | M4)) /*GPIO_98 - RIGHT*/\
+ MUX_VAL(CP(CAM_D0),           (IEN  | PTD | DIS | M4)) /*GPIO_99 - MENU*/\
+ MUX_VAL(CP(CAM_D1),           (IEN  | PTD | DIS | M4)) /*GPIO_100 - START*/\
+ MUX_VAL(CP(CAM_D2),           (IEN  | PTD | DIS | M4)) /*GPIO_101 - Y*/\
+ MUX_VAL(CP(CAM_D3),           (IEN  | PTD | DIS | M4)) /*GPIO_102 - L1*/\
+ MUX_VAL(CP(CAM_D4),           (IEN  | PTD | DIS | M4)) /*GPIO_103 - DOWN*/\
+ MUX_VAL(CP(CAM_D5),           (IEN  | PTD | DIS | M4)) /*GPIO_104 - SELECT*/\
+ MUX_VAL(CP(CAM_D6),           (IEN  | PTD | DIS | M4)) /*GPIO_105 - R1*/\
+ MUX_VAL(CP(CAM_D7),           (IEN  | PTD | DIS | M4)) /*GPIO_106 - B*/\
+ MUX_VAL(CP(CAM_D8),           (IEN  | PTD | DIS | M4)) /*GPIO_107 - R2*/\
+ MUX_VAL(CP(CAM_D10),          (IEN  | PTD | DIS | M4)) /*GPIO_109 - X*/\
+ MUX_VAL(CP(CAM_D11),          (IEN  | PTD | DIS | M4)) /*GPIO_110 - UP*/\
+ MUX_VAL(CP(CAM_XCLKB),                (IEN  | PTD | DIS | M4)) /*GPIO_111 - A*/\
  /*Audio Interface To External DAC (Headphone, Speakers)*/\
  MUX_VAL(CP(MCBSP2_FSX),       (IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\
  MUX_VAL(CP(MCBSP2_CLKX),      (IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\
  MUX_VAL(CP(MCBSP2_DX),                (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- MUX_VAL(CP(MCBSP_CLKS),       (IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP_CLKS),       (IEN  | PTD | DIS | M0)) /*McBSP_CLKS*/\
  MUX_VAL(CP(MCBSP2_DR),                (IDIS | PTD | DIS | M4)) /*GPIO_118*/\
                                                         /* - nPOWERDOWN_DAC*/\
  /*Expansion card 1*/\
@@ -210,13 +210,13 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP4_DX),                (IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\
  MUX_VAL(CP(MCBSP4_FSX),       (IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
  /*GPIO definitions for muxed pins on AV connector*/\
- MUX_VAL(CP(UART2_CTS),                (IEN  | PTU | EN  | M4)) /*GPIO_144,*/\
+ MUX_VAL(CP(UART2_CTS),                (IEN  | PTD | EN  | M4)) /*GPIO_144,*/\
                                                         /*UART2_CTS*/\
- MUX_VAL(CP(UART2_RTS),                (IEN  | PTU | DIS | M4)) /*GPIO_145,*/\
+ MUX_VAL(CP(UART2_RTS),                (IEN  | PTD | EN  | M4)) /*GPIO_145,*/\
                                                         /*UART2_RTS*/\
- MUX_VAL(CP(UART2_TX),         (IEN  | PTU | EN  | M4)) /*GPIO_146,*/\
+ MUX_VAL(CP(UART2_TX),         (IEN  | PTD | EN  | M4)) /*GPIO_146,*/\
                                                         /*UART2_TX*/\
- MUX_VAL(CP(UART2_RX),         (IEN  | PTD | DIS | M4)) /*GPIO_147,*/\
+ MUX_VAL(CP(UART2_RX),         (IEN  | PTD | EN  | M4)) /*GPIO_147,*/\
                                                         /*UART2_RX*/\
  /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\
  MUX_VAL(CP(UART3_RX_IRRX),    (IEN  | PTD | DIS | M0)) /*UART3_RX*/\
@@ -231,18 +231,18 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP1_DR),                (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
                                                         /* - LED_WIFI*/\
  /*Switches*/\
- MUX_VAL(CP(MCSPI1_CS2),       (IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+ MUX_VAL(CP(MCSPI1_CS2),       (IEN  | PTD | DIS | M4)) /*GPIO_176*/\
                                                         /* - nHOLD_SWITCH*/\
- MUX_VAL(CP(CAM_D9),           (IEN  | PTU | DIS | M4)) /*GPIO_108*/\
+ MUX_VAL(CP(CAM_D9),           (IEN  | PTD | DIS | M4)) /*GPIO_108*/\
                                                         /* - nLID_SWITCH*/\
  /*External IRQs*/\
- MUX_VAL(CP(CAM_HS),           (IEN  | PTU | DIS | M4)) /*GPIO_94*/\
+ MUX_VAL(CP(CAM_HS),           (IEN  | PTD | DIS | M4)) /*GPIO_94*/\
                                                         /* - nTOUCH_IRQ*/\
  MUX_VAL(CP(ETK_D7_ES2),       (IEN  | PTD | DIS | M4)) /*GPIO_21*/\
                                                         /* - WIFI_IRQ*/\
  MUX_VAL(CP(MCBSP1_FSX),       (IEN  | PTD | DIS | M4)) /*GPIO_161*/\
                                                         /* - nIRQ_NUB1*/\
- MUX_VAL(CP(MCBSP1_CLKX),      (IEN  | PTU | DIS | M4)) /*GPIO_162*/\
+ MUX_VAL(CP(MCBSP1_CLKX),      (IEN  | PTD | DIS | M4)) /*GPIO_162*/\
                                                         /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
  MUX_VAL(CP(UART3_CTS_RCTX),   (IEN  | PTD | DIS | M4)) /*GPIO_163*/\
@@ -262,7 +262,7 @@ const omap3_sysinfo sysinfo = {
                                                         /* - nLCD_RESET*/\
  MUX_VAL(CP(MCBSP1_CLKR),      (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
                                                         /* - RESET_NUBS*/\
- MUX_VAL(CP(UART3_RTS_SD),     (IDIS | PTU | EN  | M4)) /*GPIO_164*/\
+ MUX_VAL(CP(UART3_RTS_SD),     (IDIS | PTD | DIS | M4)) /*GPIO_164*/\
                                                         /* - EN_USB_5V*/\
  /*Spare GPIOs*/\
  MUX_VAL(CP(GPMC_NCS7),                (IEN  | PTD | EN  | M4)) /*GPIO_58*/\