+++ /dev/null
-#!/bin/sh
-#
-# rc This file is responsible for starting/stopping
-# services when the runlevel changes.
-#
-# Optimization feature:
-# A startup script is _not_ run when the service was
-# running in the previous runlevel and it wasn't stopped
-# in the runlevel transition (most Debian services don't
-# have K?? links in rc{1,2,3,4,5} )
-#
-# Author: Miquel van Smoorenburg <miquels@cistron.nl>
-# Bruce Perens <Bruce@Pixar.com>
-#
-# Version: @(#)rc 2.78 07-Nov-1999 miquels@cistron.nl
-#
-
-. /etc/default/rcS
-export VERBOSE
-
-startup_progress() {
- step=$(($step + $step_change))
- if [ "$num_steps" != "0" ]; then
- progress=$((($step * $progress_size / $num_steps) + $first_step))
- else
- progress=$progress_size
- fi
- #echo "PROGRESS is $progress $runlevel $first_step + ($step of $num_steps) $step_change $progress_size"
- if type psplash-write >/dev/null 2>&1; then
- TMPDIR=/mnt/.psplash psplash-write "PROGRESS $progress" || true
- fi
-}
-
-
-#
-# Start script or program.
-#
-startup() {
- # Handle verbosity
- [ "$VERBOSE" = very ] && echo "INIT: Running $@..."
-
- case "$1" in
- *.sh)
- # Source shell script for speed.
- (
- trap - INT QUIT TSTP
- scriptname=$1
- shift
- . $scriptname
- )
- ;;
- *)
- "$@"
- ;;
- esac
- startup_progress
-}
-
- # Ignore CTRL-C only in this shell, so we can interrupt subprocesses.
- trap ":" INT QUIT TSTP
-
- # Set onlcr to avoid staircase effect.
- stty onlcr 0>&1
-
- # Now find out what the current and what the previous runlevel are.
-
- runlevel=$RUNLEVEL
- # Get first argument. Set new runlevel to this argument.
- [ "$1" != "" ] && runlevel=$1
- if [ "$runlevel" = "" ]
- then
- echo "Usage: $0 <runlevel>" >&2
- exit 1
- fi
- previous=$PREVLEVEL
- [ "$previous" = "" ] && previous=N
-
- export runlevel previous
-
- # Is there an rc directory for this new runlevel?
- if [ -d /etc/rc$runlevel.d ]
- then
- # Find out where in the progress bar the initramfs got to.
- PROGRESS_STATE=0
- #if [ -f /dev/.initramfs/progress_state ]; then
- # . /dev/.initramfs/progress_state
- #fi
-
- # Split the remaining portion of the progress bar into thirds
- progress_size=$(((100 - $PROGRESS_STATE) / 3))
-
- case "$runlevel" in
- 0|6)
- # Count down from -100 to 0 and use the entire bar
- first_step=-100
- progress_size=100
- step_change=1
- ;;
- S)
- # Begin where the initramfs left off and use 2/3
- # of the remaining space
- first_step=$PROGRESS_STATE
- progress_size=$(($progress_size * 2))
- step_change=1
- ;;
- *)
- # Begin where rcS left off and use the final 1/3 of
- # the space (by leaving progress_size unchanged)
- first_step=$(($progress_size * 2 + $PROGRESS_STATE))
- step_change=1
- ;;
- esac
-
- num_steps=0
- for s in /etc/rc$runlevel.d/[SK]*; do
- case "${s##/etc/rc$runlevel.d/S??}" in
- gdm|xdm|kdm|reboot|halt)
- break
- ;;
- esac
- num_steps=$(($num_steps + 1))
- done
- step=0
-
- # First, run the KILL scripts.
- if [ $previous != N ]
- then
- for i in /etc/rc$runlevel.d/K[0-9][0-9]*
- do
- # Check if the script is there.
- [ ! -f $i ] && continue
-
- # Stop the service.
- startup $i stop
- done
- fi
-
- # Now run the START scripts for this runlevel.
- for i in /etc/rc$runlevel.d/S*
- do
- [ ! -f $i ] && continue
-
- if [ $previous != N ] && [ $previous != S ]
- then
- #
- # Find start script in previous runlevel and
- # stop script in this runlevel.
- #
- suffix=${i#/etc/rc$runlevel.d/S[0-9][0-9]}
- stop=/etc/rc$runlevel.d/K[0-9][0-9]$suffix
- previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix
- #
- # If there is a start script in the previous level
- # and _no_ stop script in this level, we don't
- # have to re-start the service.
- #
- [ -f $previous_start ] && [ ! -f $stop ] && continue
- fi
- case "$runlevel" in
- 0|6)
- startup $i stop
- ;;
- *)
- startup $i start
- ;;
- esac
- done
- fi
-
-#Uncomment to cause psplash to exit manually, otherwise it exits when it sees a VC switch
-#if [ "x$runlevel" != "xS" ]; then
-# if type psplash-write >/dev/null 2>&1; then
-# TMPDIR=/mnt/.psplash psplash-write "QUIT" || true
-# umount /mnt/.psplash
-# fi
-#fi
+++ /dev/null
-#!/bin/sh
-#
-# rcS Call all S??* scripts in /etc/rcS.d in
-# numerical/alphabetical order.
-#
-# Version: @(#)/etc/init.d/rcS 2.76 19-Apr-1999 miquels@cistron.nl
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-runlevel=S
-prevlevel=N
-umask 022
-export PATH runlevel prevlevel
-
-# Make sure proc is mounted
-#
-[ -d "/proc/1" ] || mount /proc
-
-#
-# See if system needs to be setup. This is ONLY meant to
-# be used for the initial setup after a fresh installation!
-#
-if [ -x /sbin/unconfigured.sh ]
-then
- /sbin/unconfigured.sh
-fi
-
-#
-# Source defaults.
-#
-. /etc/default/rcS
-
-#
-# Trap CTRL-C &c only in this shell so we can interrupt subprocesses.
-#
-trap ":" INT QUIT TSTP
-
-#
-# Call all parts in order.
-#
-exec /etc/init.d/rc S
-
-#
-# For compatibility, run the files in /etc/rc.boot too.
-#
-[ -d /etc/rc.boot ] && run-parts /etc/rc.boot
-
-#
-# Finish setup if needed. The comment above about
-# /sbin/unconfigured.sh applies here as well!
-#
-if [ -x /sbin/setup.sh ]
-then
- /sbin/setup.sh
-fi
-
git.openpandora.org / openembedded.git / commitdiff