board: zynqmp: Move zynqmp commands from board/ to arch/

The zynqmp cmds.c is currently tied to the board but the commands
contained within are more closely tied to the architecture. To
allow usage of those commands when the architecture is ZynqMP but
the board is not, this change moves the cmds into the arch/ tree.

The source file is renamed to zynqmp.c to reflect the command name
as well.

Signed-off-by: Charlie Johnston <charlie.johnston@loftorbital.com>
Link: https://lore.kernel.org/r/20240410195008.405061-2-charlie.johnston@loftorbital.com
Signed-off-by: Michal Simek <michal.simek@amd.com>

diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
index 0d2238a..aea1362 100644 (file)
--- a/arch/arm/mach-zynqmp/Kconfig
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -189,7 +189,18 @@ config SD1_LSHFT_MODE
 
 endchoice
 
+config CMD_ZYNQMP
+       bool "Enable ZynqMP specific commands"
+       depends on ZYNQMP_FIRMWARE
+       default y
+       help
+         Enable ZynqMP specific commands like "zynqmp secure"
+         which is used for zynqmp secure image verification.
+         The secure image is a xilinx specific BOOT.BIN with
+         either authentication or encryption or both encryption
+         and authentication feature enabled while generating
+         BOOT.BIN using Xilinx bootgen tool.
+
 source "board/xilinx/Kconfig"
-source "board/xilinx/zynqmp/Kconfig"
 
 endif

diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index 8f897a3..38be162 100644 (file)
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -8,3 +8,7 @@ obj-$(CONFIG_MP)        += mp.o
 obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o psu_spl_init.o
 obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o
 obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED)   += psu_spl_init.o
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_CMD_ZYNQMP) += zynqmp.o
+endif # !CONFIG_SPL_BUILD

diff --git a/board/xilinx/zynqmp/cmds.c b/arch/arm/mach-zynqmp/zynqmp.c
similarity index 100%
rename from board/xilinx/zynqmp/cmds.c
rename to arch/arm/mach-zynqmp/zynqmp.c

diff --git a/board/xilinx/zynqmp/Kconfig b/board/xilinx/zynqmp/Kconfig
deleted file mode 100644 (file)
index ffa2f02..0000000
--- a/board/xilinx/zynqmp/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright (c) 2018, Xilinx, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0
-
-if ARCH_ZYNQMP
-
-config CMD_ZYNQMP
-       bool "Enable ZynqMP specific commands"
-       depends on ZYNQMP_FIRMWARE
-       default y
-       help
-         Enable ZynqMP specific commands like "zynqmp secure"
-         which is used for zynqmp secure image verification.
-         The secure image is a xilinx specific BOOT.BIN with
-         either authentication or encryption or both encryption
-         and authentication feature enabled while generating
-         BOOT.BIN using Xilinx bootgen tool.
-
-endif

diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile
index 204e4fa..9ab50ec 100644 (file)
--- a/board/xilinx/zynqmp/Makefile
+++ b/board/xilinx/zynqmp/Makefile
@@ -40,10 +40,6 @@ $(obj)/pm_cfg_obj.o: $(shell cd $(srctree); readlink -f $(CONFIG_ZYNQMP_SPL_PM_C
 endif
 endif
 
-ifndef CONFIG_SPL_BUILD
-obj-$(CONFIG_CMD_ZYNQMP) += cmds.o
-endif
-
 # Suppress "warning: function declaration isn't a prototype"
 CFLAGS_REMOVE_psu_init_gpl.o := -Wstrict-prototypes