board: tegra30: switch to standard boot

Switch transformer, endeavoru, grouper and x3_t30 boards
to bootflow scan.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig
index 2662250..0bd0451 100644 (file)
--- a/configs/endeavoru_defconfig
+++ b/configs/endeavoru_defconfig
@@ -20,7 +20,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig
index 2346cd6..5f88b8c 100644 (file)
--- a/configs/grouper_common_defconfig
+++ b/configs/grouper_common_defconfig
@@ -20,7 +20,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig
index 61fe3d3..6628299 100644 (file)
--- a/configs/transformer_t30_defconfig
+++ b/configs/transformer_t30_defconfig
@@ -20,7 +20,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff; fi"
+CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff; fi"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000

diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig
index 7af68bd..b957578 100644 (file)
--- a/configs/x3_t30_defconfig
+++ b/configs/x3_t30_defconfig
@@ -21,7 +21,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000