sun4i-a10-inet-3f.dtb \
sun4i-a10-inet-3w.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
- sun5i-a10s-auxtek-t003.dtb \
- sun5i-a10s-auxtek-t004.dtb \
- sun5i-a10s-mk802.dtb \
- sun5i-a10s-olinuxino-micro.dtb \
- sun5i-a10s-r7-tv-dongle.dtb \
- sun5i-a10s-wobo-i5.dtb \
sun5i-a13-ampe-a76.dtb \
- sun5i-a13-difrnce-dit4350.dtb \
- sun5i-a13-empire-electronix-d709.dtb \
- sun5i-a13-empire-electronix-m712.dtb \
- sun5i-a13-hsg-h702.dtb \
- sun5i-a13-inet-86vs.dtb \
- sun5i-a13-inet-98v-rev2.dtb \
- sun5i-a13-licheepi-one.dtb \
- sun5i-a13-olinuxino.dtb \
- sun5i-a13-olinuxino-micro.dtb \
- sun5i-a13-pocketbook-touch-lux-3.dtb \
- sun5i-a13-q8-tablet.dtb \
- sun5i-a13-utoo-p66.dtb \
- sun5i-gr8-chip-pro.dtb \
- sun5i-gr8-evb.dtb \
- sun5i-r8-chip.dtb
+ sun5i-a13-inet-86vs.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Auxtek t003 A10s hdmi tv-stick";
- compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_t003>;
-
- led {
- label = "t003-tv-dongle:red:usr";
- gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
- default-state = "on";
- };
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp152: pmic@30 {
- compatible = "x-powers,axp152";
- reg = <0x30>;
- interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_t003: led-pin {
- pins = "PB2";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_usb0_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- status = "okay";
-};
-
-®_usb1_vbus {
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Auxtek t004 A10s hdmi tv-stick";
- compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_t004>;
-
- led {
- label = "t004-tv-dongle:red:usr";
- gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
- default-state = "on";
- };
- };
-
- reg_vmmc1: vmmc1 {
- compatible = "regulator-fixed";
- regulator-name = "vmmc1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp152: pmic@30 {
- compatible = "x-powers,axp152";
- reg = <0x30>;
- interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vmmc1>;
- bus-width = <4>;
- non-removable;
- cap-sdio-irq;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_t004: led-pin {
- pins = "PB2";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "MK802-A10s";
- compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led {
- label = "mk802:red:usr";
- gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
- };
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp152: pmic@30 {
- compatible = "x-powers,axp152";
- reg = <0x30>;
- interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_usb1_vbus {
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Olimex A10s-Olinuxino Micro";
- compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
-
- aliases {
- serial0 = &uart0;
- serial1 = &uart2;
- serial2 = &uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
-
- led {
- label = "a10s-olinuxino-micro:green:usr";
- gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-};
-
-&be0 {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pa_pins>;
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&i2c0 {
- status = "okay";
-
- axp152: pmic@30 {
- reg = <0x30>;
- interrupts = <0>;
- };
-};
-
-#include "axp152.dtsi"
-
-&i2c1 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c16";
- pagesize = <16>;
- reg = <0x50>;
- read-only;
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button-191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button-392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button-601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button-795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button-987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
-};
-
-&mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_olinuxino: led-pin {
- pins = "PE3";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_usb0_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
- status = "okay";
-};
-
-®_usb1_vbus {
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&spi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pb_pins>,
- <&spi2_cs0_pb_pin>;
- status = "okay";
-};
-
-&tcon0 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pc_pins>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "R7 A10s hdmi tv-stick";
- compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_r7>;
-
- led {
- label = "r7-tv-dongle:green:usr";
- gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&pio {
- led_pins_r7: led-pin {
- pins = "PB2";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a10s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "A10s-Wobo i5";
- compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led {
- label = "a10s-wobo-i5:blue:usr";
- gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- reg_emac_3v3: emac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "emac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <20000>;
- enable-active-high;
- gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pd_pins>;
- phy-handle = <&phy1>;
- status = "okay";
-};
-
-&emac_sram {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&mdio {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi1";
-};
-
-®_ldo4 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi2";
-};
-
-®_usb1_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun5i.dtsi"
-
-#include <dt-bindings/dma/sun4i-a10.h>
-
-/ {
- aliases {
- ethernet0 = &emac;
- };
-
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer-lcd0-hdmi {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
- <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
- <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
- status = "disabled";
- };
- };
-
- display-engine {
- compatible = "allwinner,sun5i-a10s-display-engine";
- allwinner,pipelines = <&fe0>;
- };
-
- soc {
- hdmi: hdmi@1c16000 {
- compatible = "allwinner,sun5i-a10s-hdmi";
- reg = <0x01c16000 0x1000>;
- interrupts = <58>;
- clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
- <&ccu CLK_PLL_VIDEO0_2X>,
- <&ccu CLK_PLL_VIDEO1_2X>;
- clock-names = "ahb", "mod", "pll-0", "pll-1";
- dmas = <&dma SUN4I_DMA_NORMAL 16>,
- <&dma SUN4I_DMA_NORMAL 16>,
- <&dma SUN4I_DMA_DEDICATED 24>;
- dma-names = "ddc-tx", "ddc-rx", "audio-tx";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdmi_in: port@0 {
- reg = <0>;
-
- hdmi_in_tcon0: endpoint {
- remote-endpoint = <&tcon0_out_hdmi>;
- };
- };
-
- hdmi_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- pwm: pwm@1c20e00 {
- compatible = "allwinner,sun5i-a10s-pwm";
- reg = <0x01c20e00 0xc>;
- clocks = <&ccu CLK_HOSC>;
- #pwm-cells = <3>;
- status = "disabled";
- };
- };
-};
-
-&ccu {
- compatible = "allwinner,sun5i-a10s-ccu";
-};
-
-&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
-};
-
-&pio {
- compatible = "allwinner,sun5i-a10s-pinctrl";
-
- uart0_pb_pins: uart0-pb-pins {
- pins = "PB19", "PB20";
- function = "uart0";
- };
-
- uart2_pc_pins: uart2-pc-pins {
- pins = "PC18", "PC19";
- function = "uart2";
- };
-
- emac_pa_pins: emac-pa-pins {
- pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- function = "emac";
- };
-
- mmc1_pins: mmc1-pins {
- pins = "PG3", "PG4", "PG5",
- "PG6", "PG7", "PG8";
- function = "mmc1";
- drive-strength = <30>;
- };
-
- spi2_pb_pins: spi2-pb-pins {
- pins = "PB12", "PB13", "PB14";
- function = "spi2";
- };
-
- spi2_cs0_pb_pin: spi2-cs0-pb-pin {
- pins = "PB11";
- function = "spi2";
- };
-};
-
-&tcon0_out {
- tcon0_out_hdmi: endpoint@2 {
- reg = <2>;
- remote-endpoint = <&hdmi_in_tcon0>;
- allwinner,tcon-channel = <1>;
- };
-};
+++ /dev/null
-/*
- * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sun5i-reference-design-tablet.dtsi"
-
-/ {
- model = "Difrnce DIT4350";
- compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
-};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Empire Electronix D709 tablet";
- compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
-
- aliases {
- serial0 = &uart1;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- power-supply = <®_vcc3v3>;
- /* TODO: backlight uses axp gpio1 as enable pin */
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-int-pll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
-};
-
-®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_ldo3>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sun5i-reference-design-tablet.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Empire Electronix M712 tablet";
- compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
-};
+++ /dev/null
-/*
- * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "HSG H702";
- compatible = "hsg,h702", "allwinner,sun5i-a13";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-&i2c1 {
- status = "okay";
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-#include "axp209.dtsi"
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
-};
-
-®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_ldo3>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sun5i-reference-design-tablet.dtsi"
-
-/ {
- model = "INet-98V Rev 02";
- compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
-};
+++ /dev/null
-/*
- * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun5i-a13-olinuxino.dts, which is
- * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
- * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Lichee Pi One";
- compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "licheepi:red:usr";
- gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
- };
-
- led-1 {
- label = "licheepi:green:usr";
- gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led-2 {
- label = "licheepi:blue:usr";
- gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
- };
-
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&i2c1 {
- status = "disabled";
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-984 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <984126>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- broken-cd;
- status = "okay";
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_4bit_pc_pins>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- broken-cd;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-#include "axp209.dtsi"
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-dll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "csi-1.8v";
-};
-
-®_ldo4 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-name = "csi-2.8v";
-};
-
-®_usb0_vbus {
- gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_vcc5v0>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
- * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Olimex A13-Olinuxino Micro";
- compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinom>;
-
- led {
- label = "a13-olinuxino-micro:green:power";
- gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_olinuxinom: led-pin {
- pins = "PG9";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-®_usb1_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Olimex A13-Olinuxino";
- compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
-
- led {
- gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- bridge {
- compatible = "dumb-vga-dac";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- vga_bridge_in: endpoint {
- remote-endpoint = <&tcon0_out_vga>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- vga_bridge_out: endpoint {
- remote-endpoint = <&vga_con_in>;
- };
- };
- };
- };
-
- vga {
- compatible = "vga-connector";
-
- port {
- vga_con_in: endpoint {
- remote-endpoint = <&vga_bridge_out>;
- };
- };
- };
-};
-
-&be0 {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button-191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button-392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button-601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button-795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button-987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pio {
- led_pins_olinuxino: led-pin {
- pins = "PG9";
- function = "gpio_out";
- drive-strength = <20>;
- };
-};
-
-®_usb0_vbus {
- status = "okay";
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-};
-
-®_usb1_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&tcon0 {
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_rgb666_pins>;
- status = "okay";
-};
-
-&tcon0_out {
- tcon0_out_vga: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vga_bridge_in>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2019 Ondrej Jirman <megous@megous.com>
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "PocketBook Touch Lux 3";
- compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
-
- aliases {
- serial0 = &uart1;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
- enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- power-supply = <®_vcc3v3>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led {
- gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
- default-state = "on";
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- label = "GPIO Keys";
-
- key-right {
- label = "Right";
- linux,code = <KEY_RIGHT>;
- gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
- };
-
- key-left {
- label = "Left";
- linux,code = <KEY_LEFT>;
- gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
- };
- };
-
- reg_1v8: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vdd-1v8-nor-ctp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_1v8_nor: regulator-nor {
- compatible = "regulator-fixed";
- regulator-name = "vdd-nor";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <®_1v8>;
- regulator-always-on;
- };
-
- reg_1v8_ctp: regulator-ctp {
- compatible = "regulator-fixed";
- regulator-name = "vdd-ctp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <®_1v8>;
- };
-
- reg_3v3_mmc0: regulator-mmc0 {
- compatible = "regulator-fixed";
- regulator-name = "vdd-mmc0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
- vin-supply = <®_vcc3v3>;
- };
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&i2c2 {
- status = "okay";
-
- /* Touchpanel is connected here. */
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Home";
- linux,code = <KEY_HOME>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-400 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_3v3_mmc0>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_4bit_pc_pins>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-name = "vdd-int-pll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
- /* We need this otherwise the LDO3 would overload */
- regulator-soft-start;
- regulator-ramp-delay = <1600>;
-};
-
-&spi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
- status = "okay";
-
- epd_flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "macronix,mx25u4033", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <4000000>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&battery_power_supply {
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb1_vbus-supply = <®_ldo3>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sun5i-reference-design-tablet.dtsi"
-
-/ {
- model = "Q8 A13 Tablet";
- compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
-
- panel: panel {
- compatible = "bananapi,s070wv20-ct16";
- power-supply = <®_vcc3v3>;
- enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
- backlight = <&backlight>;
-
- port {
- panel_input: endpoint {
- remote-endpoint = <&tcon0_out_lcd>;
- };
- };
- };
-};
-
-&be0 {
- status = "okay";
-};
-
-&tcon0 {
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_rgb666_pins>;
- status = "okay";
-};
-
-&tcon0_out {
- tcon0_out_lcd: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
-};
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-#include "sun5i-reference-design-tablet.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Utoo P66";
- compatible = "utoo,p66", "allwinner,sun5i-a13";
-
- /* The P66 uses the uart pins as gpios */
- aliases {
- /delete-property/serial0;
- };
-
- chosen {
- /delete-property/stdout-path;
- };
-
- i2c_lcd: i2c {
- /* The lcd panel i2c interface is hooked up via gpios */
- compatible = "i2c-gpio";
- sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
- scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
- i2c-gpio,delay-us = <5>;
- };
-};
-
-&backlight {
- /* Note levels of 10 / 20% result in backlight off */
- brightness-levels = <0 30 40 50 60 70 80 90 100>;
- default-brightness-level = <6>;
-};
-
-&codec {
- allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-
- mmccard: mmccard@0 {
- reg = <0>;
- compatible = "mmc-card";
- broken-hpi;
- };
-};
-
-®_usb0_vbus {
- gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-};
-
-&touchscreen {
- compatible = "chipone,icn8318";
- reg = <0x40>;
- /* The P66 uses a different EINT then the reference design */
- interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
- /* The icn8318 binding expects wake-gpios instead of power-gpios */
- wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- touchscreen-inverted-x;
- touchscreen-swapped-x-y;
- status = "okay";
-};
-
-&uart1 {
- /* The P66 uses the uart pins as gpios */
- status = "disabled";
-};
+++ /dev/null
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun5i.dtsi"
-
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- thermal-zones {
- cpu-thermal {
- /* milliseconds */
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&rtp>;
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-
- trips {
- cpu_alert0: cpu-alert0 {
- /* milliCelsius */
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- /* milliCelsius */
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- display-engine {
- compatible = "allwinner,sun5i-a13-display-engine";
- allwinner,pipelines = <&fe0>;
- };
-
- soc {
- pwm: pwm@1c20e00 {
- compatible = "allwinner,sun5i-a13-pwm";
- reg = <0x01c20e00 0xc>;
- clocks = <&ccu CLK_HOSC>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- };
-};
-
-&ccu {
- compatible = "allwinner,sun5i-a13-ccu";
-};
-
-&cpu0 {
- clock-latency = <244144>; /* 8 32k periods */
- operating-points =
- /* kHz uV */
- <1008000 1400000>,
- <912000 1350000>,
- <864000 1300000>,
- <624000 1200000>,
- <576000 1200000>,
- <432000 1200000>;
- #cooling-cells = <2>;
-};
-
-&pio {
- compatible = "allwinner,sun5i-a13-pinctrl";
-};
+++ /dev/null
-/*
- * Copyright 2016 Free Electrons
- * Copyright 2016 NextThing Co
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-gr8.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "NextThing C.H.I.P. Pro";
- compatible = "nextthing,chip-pro", "nextthing,gr8";
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "chip-pro:white:status";
- gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- mmc0_pwrseq: pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
- };
-};
-
-&codec {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
-
- /*
- * The interrupt is routed through the "External Fast
- * Interrupt Request" pin (ball G13 of the module)
- * directly to the main interrupt controller, without
- * any other controller interfering.
- */
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "disabled";
-};
-
-&i2s0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
- status = "disabled";
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- mmc-pwrseq = <&mmc0_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
- status = "okay";
-
- nand@0 {
- reg = <0>;
- allwinner,rb = <0>;
- nand-ecc-mode = "hw";
- };
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
- status = "disabled";
-};
-
-®_dcdc2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
- regulator-always-on;
-};
-
-®_dcdc3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1300000>;
- regulator-name = "vdd-sys";
- regulator-always-on;
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "avcc";
- regulator-always-on;
-};
-
-/*
- * Both LDO3 and LDO4 are used in parallel to power up the
- * WiFi/BT chip.
- */
-®_ldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi-1";
- regulator-always-on;
-};
-
-®_ldo4 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi-2";
- regulator-always-on;
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
- status = "disabled";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- /*
- * The CHIP Pro doesn't have a controllable VBUS, nor does it
- * have any 5v rail on the board itself.
- *
- * If one wants to use it as a true OTG port, it should be
- * done in the baseboard, and its DT / overlay will add it.
- */
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_power-supply = <&usb_power_supply>;
- usb1_vbus-supply = <®_vcc5v0>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2016 Free Electrons
- * Copyright 2016 NextThing Co
- *
- * Mylène Josserand <mylene.josserand@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-gr8.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "NextThing GR8-EVB";
- compatible = "nextthing,gr8-evb", "nextthing,gr8";
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- serial0 = &uart1;
- serial1 = &uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 10000 0>;
- enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
- power-supply = <®_vcc3v3>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- };
-
- sound-analog {
- compatible = "simple-audio-card";
- simple-audio-card,name = "gr8-evb-wm8978";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8978>;
- };
- };
-
- sound-spdif {
- compatible = "simple-audio-card";
- simple-audio-card,name = "On-board SPDIF";
-
- simple-audio-card,cpu {
- sound-dai = <&spdif>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&spdif_out>;
- };
- };
-
- spdif_out: spdif-out {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- };
-};
-
-&be0 {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
-
- /*
- * The interrupt is routed through the "External Fast
- * Interrupt Request" pin (ball G13 of the module)
- * directly to the main interrupt controller, without
- * any other controller interfering.
- */
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
- status = "okay";
-
- wm8978: codec@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8978";
- reg = <0x1a>;
- };
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2s0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
- status = "okay";
-};
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pin>;
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-190 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <190000>;
- };
-
- button-390 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <390000>;
- };
-
- button-600 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <600000>;
- };
-
- button-800 {
- label = "Search";
- linux,code = <KEY_SEARCH>;
- channel = <0>;
- voltage = <800000>;
- };
-
- button-980 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <980000>;
- };
-
- button-1180 {
- label = "Esc";
- linux,code = <KEY_ESC>;
- channel = <0>;
- voltage = <1180000>;
- };
-
- button-1400 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <1400000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
-
- /* MLC Support sucks for now */
- status = "disabled";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
- regulator-always-on;
-};
-
-®_dcdc3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1300000>;
- regulator-name = "vdd-sys";
- regulator-always-on;
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "avcc";
- regulator-always-on;
-};
-
-®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&rtp {
- allwinner,ts-attached;
-};
-
-&spdif {
- pinctrl-names = "default";
- pinctrl-0 = <&spdif_tx_pin>;
- status = "okay";
-};
-
-&tve0 {
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
- status = "okay";
-};
-
-&usb_otg {
- /*
- * The GR8-EVB has a somewhat interesting design. There's a
- * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
- * so everything should work just fine.
- *
- * Except that the pin supposed to control VBUS is not
- * connected to any controllable output, neither to the SoC
- * through a GPIO or to the PMIC, and it is pulled down,
- * meaning that we will never be able to enable VBUS on this
- * board.
- */
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- usb0_vbus_power-supply = <&usb_power_supply>;
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2016 Mylène Josserand
- *
- * Mylène Josserand <mylene.josserand@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun5i.dtsi"
-
-#include <dt-bindings/clock/sun5i-ccu.h>
-#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/reset/sun5i-ccu.h>
-
-/ {
- display-engine {
- compatible = "allwinner,sun5i-a13-display-engine";
- allwinner,pipelines = <&fe0>;
- };
-
- soc {
- pwm: pwm@1c20e00 {
- compatible = "allwinner,sun5i-a10s-pwm";
- reg = <0x01c20e00 0xc>;
- clocks = <&ccu CLK_HOSC>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- spdif: spdif@1c21000 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-spdif";
- reg = <0x01c21000 0x400>;
- interrupts = <13>;
- clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
- clock-names = "apb", "spdif";
- dmas = <&dma SUN4I_DMA_NORMAL 2>,
- <&dma SUN4I_DMA_NORMAL 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2s0: i2s@1c22400 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-i2s";
- reg = <0x01c22400 0x400>;
- interrupts = <16>;
- clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>;
- clock-names = "apb", "mod";
- dmas = <&dma SUN4I_DMA_NORMAL 3>,
- <&dma SUN4I_DMA_NORMAL 3>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
- };
-};
-
-&ccu {
- compatible = "nextthing,gr8-ccu";
-};
-
-&pio {
- compatible = "nextthing,gr8-pinctrl";
-
- i2s0_data_pins: i2s0-data-pins {
- pins = "PB6", "PB7", "PB8", "PB9";
- function = "i2s0";
- };
-
- i2s0_mclk_pin: i2s0-mclk-pin {
- pins = "PB5";
- function = "i2s0";
- };
-
- pwm1_pins: pwm1-pin {
- pins = "PG13";
- function = "pwm1";
- };
-
- spdif_tx_pin: spdif-tx-pin {
- pins = "PB10";
- function = "spdif";
- bias-pull-up;
- };
-
- uart1_cts_rts_pins: uart1-cts-rts-pins {
- pins = "PG5", "PG6";
- function = "uart1";
- };
-};
+++ /dev/null
-/*
- * Copyright 2015 Free Electrons
- * Copyright 2015 NextThing Co
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun5i-r8.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "NextThing C.H.I.P.";
- compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- serial0 = &uart1;
- serial1 = &uart3;
- spi0 = &spi2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-0 {
- label = "chip:white:status";
- gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- mmc0_pwrseq: pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
- };
-
- onewire {
- compatible = "w1-gpio";
- gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
- };
-};
-
-&be0 {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
-
- /*
- * The interrupt is routed through the "External Fast
- * Interrupt Request" pin (ball G13 of the module)
- * directly to the main interrupt controller, without
- * any other controller interfering.
- */
- interrupts = <0>;
- };
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
- status = "okay";
-};
-
-&battery_power_supply {
- status = "okay";
-};
-
-&i2c1 {
- status = "disabled";
-};
-
-&i2c2 {
- status = "okay";
-
- xio: gpio@38 {
- compatible = "nxp,pcf8574a";
- reg = <0x38>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-parent = <&pio>;
- interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-};
-
-&mmc0_pins {
- bias-pull-up;
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- mmc-pwrseq = <&mmc0_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "cpuvdd";
- regulator-always-on;
-};
-
-®_dcdc3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1300000>;
- regulator-name = "corevdd";
- regulator-always-on;
-};
-
-®_ldo1 {
- regulator-name = "rtcvdd";
-};
-
-®_ldo2 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "avcc";
- regulator-always-on;
-};
-
-/*
- * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
- * Chip.
- *
- * If those are not enabled, the SDIO part will not enumerate, and
- * since there's no way currently to pass DT infos to an SDIO device,
- * we cannot really do better than this ugly hack for now.
- */
-®_ldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi-1";
- regulator-always-on;
-};
-
-®_ldo4 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi-2";
- regulator-always-on;
-};
-
-®_ldo5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-1v8";
-};
-
-®_usb0_vbus {
- vin-supply = <®_vcc5v0>;
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
- status = "okay";
-};
-
-&spi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pe_pins>;
- status = "disabled";
-};
-
-&tcon0 {
- status = "okay";
-};
-
-&tve0 {
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pg_pins>,
- <&uart3_cts_rts_pg_pins>;
- status = "okay";
-
- bluetooth {
- compatible = "realtek,rtl8723bs-bt";
- device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
- host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
- };
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-
- usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_power-supply = <&usb_power_supply>;
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_vcc5v0>;
-};
+++ /dev/null
-/*
- * Copyright 2015 Free Electrons
- * Copyright 2015 NextThing Co
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun5i-a13.dtsi"
-
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-#include "sunxi-reference-design-tablet.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- aliases {
- serial0 = &uart1;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <8>;
- enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
- power-supply = <®_vcc3v0>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&codec {
- allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <®_dcdc2>;
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&i2c0 {
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
-};
-
-&i2c1 {
- /*
- * The gsl1680 is rated at 400KHz and it will not work reliable at
- * 100KHz, this has been confirmed on multiple different q8 tablets.
- * All other devices on this bus are also rated for 400KHz.
- */
- clock-frequency = <400000>;
-
- touchscreen: touchscreen@40 {
- reg = <0x40>;
- interrupt-parent = <&pio>;
- interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
- power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
- /* Tablet dts must provide reg and compatible */
- status = "disabled";
- };
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
- status = "okay";
-};
-
-&battery_power_supply {
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-pll";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
-};
-
-®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pg_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
- usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
- usb0_vbus_power-supply = <&usb_power_supply>;
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_ldo3>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright 2012-2015 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/sun5i-ccu.h>
-#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/reset/sun5i-ccu.h>
-
-/ {
- interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0x0>;
- clocks = <&ccu CLK_CPU>;
- };
- };
-
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer-lcd0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
-
- framebuffer-lcd0-tve0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
- <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: clk-24M {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk-32k {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
- default-pool {
- compatible = "shared-dma-pool";
- size = <0x6000000>;
- alloc-ranges = <0x40000000 0x10000000>;
- reusable;
- linux,cma-default;
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- dma-ranges;
- ranges;
-
- system-control@1c00000 {
- compatible = "allwinner,sun5i-a13-system-control";
- reg = <0x01c00000 0x30>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram_a: sram@0 {
- compatible = "mmio-sram";
- reg = <0x00000000 0xc000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00000000 0xc000>;
-
- emac_sram: sram-section@8000 {
- compatible = "allwinner,sun5i-a13-sram-a3-a4",
- "allwinner,sun4i-a10-sram-a3-a4";
- reg = <0x8000 0x4000>;
- status = "disabled";
- };
- };
-
- sram_d: sram@10000 {
- compatible = "mmio-sram";
- reg = <0x00010000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00010000 0x1000>;
-
- otg_sram: sram-section@0 {
- compatible = "allwinner,sun5i-a13-sram-d",
- "allwinner,sun4i-a10-sram-d";
- reg = <0x0000 0x1000>;
- status = "disabled";
- };
- };
-
- sram_c: sram@1d00000 {
- compatible = "mmio-sram";
- reg = <0x01d00000 0xd0000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x01d00000 0xd0000>;
-
- ve_sram: sram-section@0 {
- compatible = "allwinner,sun5i-a13-sram-c1",
- "allwinner,sun4i-a10-sram-c1";
- reg = <0x000000 0x80000>;
- };
- };
- };
-
- mbus: dram-controller@1c01000 {
- compatible = "allwinner,sun5i-a13-mbus";
- reg = <0x01c01000 0x1000>;
- clocks = <&ccu CLK_MBUS>;
- #address-cells = <1>;
- #size-cells = <1>;
- dma-ranges = <0x00000000 0x40000000 0x20000000>;
- #interconnect-cells = <1>;
- };
-
- dma: dma-controller@1c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ccu CLK_AHB_DMA>;
- #dma-cells = <2>;
- };
-
- nfc: nand-controller@1c03000 {
- compatible = "allwinner,sun4i-a10-nand";
- reg = <0x01c03000 0x1000>;
- interrupts = <37>;
- clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 3>;
- dma-names = "rxtx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi0: spi@1c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@1c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- tve0: tv-encoder@1c0a000 {
- compatible = "allwinner,sun4i-a10-tv-encoder";
- reg = <0x01c0a000 0x1000>;
- clocks = <&ccu CLK_AHB_TVE>;
- resets = <&ccu RST_TVE>;
- status = "disabled";
-
- port {
-
- tve0_in_tcon0: endpoint {
- remote-endpoint = <&tcon0_out_tve0>;
- };
- };
- };
-
- emac: ethernet@1c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
- interrupts = <55>;
- clocks = <&ccu CLK_AHB_EMAC>;
- allwinner,sram = <&emac_sram 1>;
- status = "disabled";
- };
-
- mdio: mdio@1c0b080 {
- compatible = "allwinner,sun4i-a10-mdio";
- reg = <0x01c0b080 0x14>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- tcon0: lcd-controller@1c0c000 {
- compatible = "allwinner,sun5i-a13-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <44>;
- dmas = <&dma SUN4I_DMA_DEDICATED 14>;
- resets = <&ccu RST_LCD>;
- reset-names = "lcd";
- clocks = <&ccu CLK_AHB_LCD>,
- <&ccu CLK_TCON_CH0>,
- <&ccu CLK_TCON_CH1>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon-data-clock";
- #clock-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- reg = <0>;
-
- tcon0_in_be0: endpoint {
- remote-endpoint = <&be0_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon0_out_tve0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tve0_in_tcon0>;
- allwinner,tcon-channel = <1>;
- };
- };
- };
- };
-
- video-codec@1c0e000 {
- compatible = "allwinner,sun5i-a13-video-engine";
- reg = <0x01c0e000 0x1000>;
- clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
- <&ccu CLK_DRAM_VE>;
- clock-names = "ahb", "mod", "ram";
- resets = <&ccu RST_VE>;
- interrupts = <53>;
- allwinner,sram = <&ve_sram 1>;
- };
-
- mmc0: mmc@1c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
- clock-names = "ahb", "mmc";
- interrupts = <32>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@1c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
- clock-names = "ahb", "mmc";
- interrupts = <33>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@1c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
- clock-names = "ahb", "mmc";
- interrupts = <34>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb_otg: usb@1c13000 {
- compatible = "allwinner,sun4i-a10-musb";
- reg = <0x01c13000 0x0400>;
- clocks = <&ccu CLK_AHB_OTG>;
- interrupts = <38>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- allwinner,sram = <&otg_sram 1>;
- dr_mode = "otg";
- status = "disabled";
- };
-
- usbphy: phy@1c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&ccu CLK_USB_PHY0>;
- clock-names = "usb_phy";
- resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@1c14000 {
- compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ccu CLK_AHB_EHCI>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@1c14400 {
- compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- crypto: crypto-engine@1c15000 {
- compatible = "allwinner,sun5i-a13-crypto",
- "allwinner,sun4i-a10-crypto";
- reg = <0x01c15000 0x1000>;
- interrupts = <54>;
- clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
- clock-names = "ahb", "mod";
- };
-
- spi2: spi@1c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- ccu: clock@1c20000 {
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- intc: interrupt-controller@1c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@1c20800 {
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <3>;
- #gpio-cells = <3>;
-
- emac_pd_pins: emac-pd-pins {
- pins = "PD6", "PD7", "PD10",
- "PD11", "PD12", "PD13", "PD14",
- "PD15", "PD18", "PD19", "PD20",
- "PD21", "PD22", "PD23", "PD24",
- "PD25", "PD26", "PD27";
- function = "emac";
- };
-
- i2c0_pins: i2c0-pins {
- pins = "PB0", "PB1";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1-pins {
- pins = "PB15", "PB16";
- function = "i2c1";
- };
-
- i2c2_pins: i2c2-pins {
- pins = "PB17", "PB18";
- function = "i2c2";
- };
-
- ir0_rx_pin: ir0-rx-pin {
- pins = "PB4";
- function = "ir0";
- };
-
- lcd_rgb565_pins: lcd-rgb565-pins {
- pins = "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- function = "lcd0";
- };
-
- lcd_rgb666_pins: lcd-rgb666-pins {
- pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- function = "lcd0";
- };
-
- mmc0_pins: mmc0-pins {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
- pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11";
- function = "mmc2";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- /omit-if-no-ref/
- mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
- pins = "PE4", "PE5", "PE6", "PE7",
- "PE8", "PE9";
- function = "mmc2";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc2_8bit_pins: mmc2-8bit-pins {
- pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11", "PC12", "PC13",
- "PC14", "PC15";
- function = "mmc2";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- nand_pins: nand-pins {
- pins = "PC0", "PC1", "PC2",
- "PC5", "PC8", "PC9", "PC10",
- "PC11", "PC12", "PC13", "PC14",
- "PC15";
- function = "nand0";
- };
-
- nand_cs0_pin: nand-cs0-pin {
- pins = "PC4";
- function = "nand0";
- };
-
- nand_rb0_pin: nand-rb0-pin {
- pins = "PC6";
- function = "nand0";
- };
-
- pwm0_pin: pwm0-pin {
- pins = "PB2";
- function = "pwm";
- };
-
- spi2_pe_pins: spi2-pe-pins {
- pins = "PE1", "PE2", "PE3";
- function = "spi2";
- };
-
- spi2_cs0_pe_pin: spi2-cs0-pe-pin {
- pins = "PE0";
- function = "spi2";
- };
-
- uart1_pe_pins: uart1-pe-pins {
- pins = "PE10", "PE11";
- function = "uart1";
- };
-
- uart1_pg_pins: uart1-pg-pins {
- pins = "PG3", "PG4";
- function = "uart1";
- };
-
- uart2_pd_pins: uart2-pd-pins {
- pins = "PD2", "PD3";
- function = "uart2";
- };
-
- uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
- pins = "PD4", "PD5";
- function = "uart2";
- };
-
- uart3_pg_pins: uart3-pg-pins {
- pins = "PG9", "PG10";
- function = "uart3";
- };
-
- uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
- pins = "PG11", "PG12";
- function = "uart3";
- };
- };
-
- timer@1c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>,
- <23>,
- <24>,
- <25>,
- <67>,
- <68>;
- clocks = <&ccu CLK_HOSC>;
- };
-
- wdt: watchdog@1c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- interrupts = <24>;
- clocks = <&osc24M>;
- };
-
- ir0: ir@1c21800 {
- compatible = "allwinner,sun4i-a10-ir";
- clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
- clock-names = "apb", "ir";
- interrupts = <5>;
- reg = <0x01c21800 0x40>;
- status = "disabled";
- };
-
- lradc: lradc@1c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- codec: codec@1c22c00 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec";
- reg = <0x01c22c00 0x40>;
- interrupts = <30>;
- clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
- clock-names = "apb", "codec";
- dmas = <&dma SUN4I_DMA_NORMAL 19>,
- <&dma SUN4I_DMA_NORMAL 19>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- sid: eeprom@1c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
- };
-
- rtp: rtp@1c25000 {
- compatible = "allwinner,sun5i-a13-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
- uart0: serial@1c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <1>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART0>;
- status = "disabled";
- };
-
- uart1: serial@1c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART1>;
- status = "disabled";
- };
-
- uart2: serial@1c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <3>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART2>;
- status = "disabled";
- };
-
- uart3: serial@1c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART3>;
- status = "disabled";
- };
-
- i2c0: i2c@1c2ac00 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&ccu CLK_APB1_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@1c2b000 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&ccu CLK_APB1_I2C1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@1c2b400 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&ccu CLK_APB1_I2C2>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mali: gpu@1c40000 {
- compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
- reg = <0x01c40000 0x10000>;
- interrupts = <69>, <70>, <71>, <72>, <73>;
- interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
- clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
- clock-names = "bus", "core";
- resets = <&ccu RST_GPU>;
- assigned-clocks = <&ccu CLK_GPU>;
- assigned-clock-rates = <320000000>;
- };
-
- timer@1c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ccu CLK_AHB_HSTIMER>;
- };
-
- fe0: display-frontend@1e00000 {
- compatible = "allwinner,sun5i-a13-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <47>;
- clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
- <&ccu CLK_DRAM_DE_FE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_FE>;
- interconnects = <&mbus 19>;
- interconnect-names = "dma-mem";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- reg = <1>;
-
- fe0_out_be0: endpoint {
- remote-endpoint = <&be0_in_fe0>;
- };
- };
- };
- };
-
- be0: display-backend@1e60000 {
- compatible = "allwinner,sun5i-a13-display-backend";
- reg = <0x01e60000 0x10000>;
- interrupts = <47>;
- clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_DRAM_DE_BE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_BE>;
- interconnects = <&mbus 18>;
- interconnect-names = "dma-mem";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be0_in: port@0 {
- reg = <0>;
-
- be0_in_fe0: endpoint {
- remote-endpoint = <&fe0_out_be0>;
- };
- };
-
- be0_out: port@1 {
- reg = <1>;
-
- be0_out_tcon0: endpoint {
- remote-endpoint = <&tcon0_in_be0>;
- };
- };
- };
- };
- };
-};
select SUPPORT_SPL
imply SPL_SYS_I2C_LEGACY
imply SYS_I2C_LEGACY
+ imply OF_UPSTREAM
config MACH_SUN6I
bool "sun6i (Allwinner A31)"
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a10s-olinuxino-micro"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-olinuxino-micro"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-olinuxino"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
+# CONFIG_OF_UPSTREAM is not set
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a10s-auxtek-t003"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a10s-auxtek-t004"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-r8-chip"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-gr8-chip-pro"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-gr8-chip-pro"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-empire-electronix-d709"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-empire-electronix-m712"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-utoo-p66"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a10s-wobo-i5"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-difrnce-dit4350"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-difrnce-dit4350"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs"
+# CONFIG_OF_UPSTREAM is not set
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=408
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-inet-98v-rev2"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a10s-mk802"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a13-q8-tablet"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=384
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun5i-a10s-r7-tv-dongle"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=384
git.openpandora.org / pandora-u-boot.git / commitdiff