---- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700
-+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/arch/arm/boot/compressed/head.S 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/arch/arm/boot/compressed/head.S 2005-10-26 15:23:39.646352497 -0700
@@ -37,6 +37,7 @@
defined(CONFIG_ARCH_INTEGRATOR) || \
defined(CONFIG_ARCH_PXA) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
defined(CONFIG_ARCH_OMAP)
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700
-@@ -43,6 +43,12 @@
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/arch/arm/mach-ixp4xx/Kconfig 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Kconfig 2005-10-26 15:23:39.646352497 -0700
+@@ -43,6 +43,12 @@ config MACH_IXDP465
IXDP465 Development Platform (Also known as BMP).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
#
# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700
-@@ -44,5 +44,6 @@
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/arch/arm/mach-ixp4xx/Makefile 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:39.646352497 -0700
+@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
+
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-10-26 15:19:43.171472071 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-10-26 15:23:39.646352497 -0700
+@@ -0,0 +1,78 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-pci.c
++ *
++ * NSLU2 board-level PCI initialization
++ *
++ * based on ixdp425-pci.c:
++ * Copyright (C) 2002 Intel Corporation.
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init nslu2_pci_preinit(void)
++{
++ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
++ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
++ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
++
++ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
++ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
++ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
++
++ /* INTD is not configured as GPIO is used
++ * for the power input button.
++ */
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
++ IRQ_NSLU2_PCI_INTA,
++ IRQ_NSLU2_PCI_INTB,
++ IRQ_NSLU2_PCI_INTC,
++ };
++
++ int irq = -1;
++
++ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
++ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
++ irq = pci_irq_table[
++ (slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
++ }
++
++ return irq;
++}
++
++struct hw_pci __initdata nslu2_pci = {
++ .nr_controllers = 1,
++ .preinit = nslu2_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = nslu2_map_irq,
++};
++
++int __init nslu2_pci_init(void) /* monkey see, monkey do */
++{
++ if (machine_is_nslu2())
++ pci_common_init(&nslu2_pci);
++
++ return 0;
++}
++
++subsys_initcall(nslu2_pci_init);
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/arch/arm/mach-ixp4xx/nslu2-power.c 2005-10-26 15:19:43.171472071 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-power.c 2005-10-26 15:23:39.646352497 -0700
+@@ -0,0 +1,92 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-power.c
++ *
++ * NSLU2 Power/Reset driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/reboot.h>
++#include <linux/interrupt.h>
++
++#include <asm/mach-types.h>
++
++static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* Signal init to do the ctrlaltdel action */
++ kill_proc(1, SIGINT, 1);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* FIXME This doesn't reset the NSLU2. It powers it off.
++ * Close enough, since reset is unreliable
++ */
++
++ machine_power_off();
++
++ return IRQ_HANDLED;
++}
++
++static int __init nslu2_power_init(void)
++{
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ printk(KERN_INFO "NSLU2: power/reset\n");
++
++ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
++
++ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
++ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
++
++ gpio_line_isr_clear(NSLU2_RB_GPIO);
++ gpio_line_isr_clear(NSLU2_PB_GPIO);
++
++ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
++ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
++ NSLU2_RB_IRQ);
++
++ return -EIO;
++ }
++
++ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
++ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
++ NSLU2_PB_IRQ);
++
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static void __exit nslu2_power_exit(void)
++{
++ free_irq(NSLU2_RB_IRQ, NULL);
++ free_irq(NSLU2_PB_IRQ, NULL);
++}
++
++module_init(nslu2_power_init);
++module_exit(nslu2_power_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
++MODULE_LICENSE("GPL");
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-10-26 15:19:43.171472071 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-10-26 15:23:39.646352497 -0700
+@@ -0,0 +1,134 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-setup.c
++ *
++ * NSLU2 board-setup
++ *
++ * based ixdp425-setup.c:
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Author: Mark Rakes <mrakes at mac.com>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * Fixed missing init_time in MACHINE_START kas11 10/22/04
++ * Changed to conform to new style __init ixdp425 kas11 10/22/04
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data nslu2_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource nslu2_flash_resource = {
++ .start = NSLU2_FLASH_BASE,
++ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device nslu2_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev.platform_data = &nslu2_flash_data,
++ .num_resources = 1,
++ .resource = &nslu2_flash_resource,
++};
++
++static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
++ .sda_pin = NSLU2_SDA_PIN,
++ .scl_pin = NSLU2_SCL_PIN,
++};
++
++static struct platform_device nslu2_i2c_controller = {
++ .name = "IXP4XX-I2C",
++ .id = 0,
++ .dev.platform_data = &nslu2_i2c_gpio_pins,
++ .num_resources = 0
++};
++
++static struct resource nslu2_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ }
++};
++
++static struct plat_serial8250_port nslu2_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { }
++};
++
++static struct platform_device nslu2_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = nslu2_uart_data,
++ .num_resources = 2,
++ .resource = nslu2_uart_resources
++};
++
++static struct platform_device *nslu2_devices[] __initdata = {
++ &nslu2_i2c_controller,
++ &nslu2_flash,
++ &nslu2_uart
++};
++
++static void nslu2_power_off(void)
++{
++ /* This causes the box to drop the power and go dead. */
++
++ /* enable the pwr cntl gpio */
++ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
++
++ /* do the deed */
++ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
++}
++
++static void __init nslu2_init(void)
++{
++ ixp4xx_sys_init();
++
++ pm_power_off = nslu2_power_off;
++
++ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
++}
++
++MACHINE_START(NSLU2, "Linksys NSLU2")
++ /* Maintainer: www.nslu2-linux.org */
++ .phys_ram = PHYS_OFFSET,
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
++ .boot_params = 0x00000100,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq, /* FIXME: all irq are off here */
++ .timer = &ixp4xx_timer,
++ .init_machine = nslu2_init,
++MACHINE_END
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-10-26 15:19:37.451112111 -0700
++++ linux-2.6.13/include/asm-arm/arch-ixp4xx/hardware.h 2005-10-26 15:23:39.650352748 -0700
+@@ -44,5 +44,6 @@ extern unsigned int processor_id;
#include "ixdp425.h"
#include "coyote.h"
#include "prpmc1100.h"
+#include "nslu2.h"
#endif /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/include/asm-arm/arch-ixp4xx/irqs.h 2005-10-26 15:23:39.650352748 -0700
@@ -93,4 +93,11 @@
#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
+
#endif
+--- linux-2.6.13/.pc/50-nslu2-arch.patch/include/asm-arm/arch-ixp4xx/nslu2.h 2005-10-26 15:19:43.175472322 -0700
++++ linux-2.6.13/include/asm-arm/arch-ixp4xx/nslu2.h 2005-10-26 15:23:39.650352748 -0700
+@@ -0,0 +1,96 @@
++/*
++ * include/asm-arm/arch-ixp4xx/nslu2.h
++ *
++ * NSLU2 platform specific definitions
++ *
++ * Author: Mark Rakes <mrakes AT mac.com>
++ * Maintainers: http://www.nslu2-linux.org
++ *
++ * based on ixdp425.h:
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
++#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
++
++#define NSLU2_SDA_PIN 7
++#define NSLU2_SCL_PIN 6
++
++/*
++ * NSLU2 PCI IRQs
++ */
++#define NSLU2_PCI_MAX_DEV 3
++#define NSLU2_PCI_IRQ_LINES 3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define NSLU2_PCI_INTA_PIN 11
++#define NSLU2_PCI_INTB_PIN 10
++#define NSLU2_PCI_INTC_PIN 9
++#define NSLU2_PCI_INTD_PIN 8
++
++
++/* NSLU2 Timer */
++#define NSLU2_FREQ 66000000
++#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
++#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
++
++/* GPIO */
++
++#define NSLU2_GPIO0 0
++#define NSLU2_GPIO1 1
++#define NSLU2_GPIO2 2
++#define NSLU2_GPIO3 3
++#define NSLU2_GPIO4 4
++#define NSLU2_GPIO5 5
++#define NSLU2_GPIO6 6
++#define NSLU2_GPIO7 7
++#define NSLU2_GPIO8 8
++#define NSLU2_GPIO9 9
++#define NSLU2_GPIO10 10
++#define NSLU2_GPIO11 11
++#define NSLU2_GPIO12 12
++#define NSLU2_GPIO13 13
++#define NSLU2_GPIO14 14
++#define NSLU2_GPIO15 15
++
++/* Buttons */
++
++#define NSLU2_PB_GPIO NSLU2_GPIO5
++#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
++#define NSLU2_RB_GPIO NSLU2_GPIO12
++
++#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
++#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
++
++#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO)
++#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO)
++#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO)
++
++/* Buzzer */
++
++#define NSLU2_GPIO_BUZZ 4
++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
++/* LEDs */
++
++#define NSLU2_LED_RED NSLU2_GPIO0
++#define NSLU2_LED_GRN NSLU2_GPIO1
++
++#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
++#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
++
++#define NSLU2_LED_DISK1 NSLU2_GPIO2
++#define NSLU2_LED_DISK2 NSLU2_GPIO3
++
++#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
++#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
++
++
+++ /dev/null
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:42:02.000000000 +0200
-+++ test14/arch/arm/mach-ixp4xx/Makefile 2005-10-06 21:29:53.000000000 +0200
-@@ -8,4 +8,9 @@
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
-+
-+leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
-+obj-$(CONFIG_LEDS) += $(leds-y)
-+
-
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/nslu2-rtc.c 1970-01-01 01:00:00.000000000 +0100
-+++ test14/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-06 21:29:53.000000000 +0200
-@@ -0,0 +1,113 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-rtc.c
-+ *
-+ * NSLU2 RTC driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on x1205-rtc.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/time.h>
-+#include <linux/rtc.h>
-+#include <linux/init.h>
-+
-+#include <linux/x1205.h>
-+
-+#include <asm/rtc.h>
-+#include <asm/mach-types.h>
-+
-+extern int (*set_rtc)(void);
-+
-+static int nslu2_set_rtc(void)
-+{
-+ struct rtc_time new_tm, old_tm;
-+ unsigned long cur_secs = xtime.tv_sec;
-+
-+ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
-+ return 0;
-+
-+ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+ new_tm.tm_sec = cur_secs % 60;
-+ cur_secs /= 60;
-+ new_tm.tm_min = cur_secs % 60;
-+ cur_secs /= 60;
-+ new_tm.tm_hour = cur_secs % 24;
-+
-+ /*
-+ * avoid writing when we're going to change the day
-+ * of the month. We will retry in the next minute.
-+ * This basically means that if the RTC must not drift
-+ * by more than 1 minute in 11 minutes.
-+ */
-+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+ return 1;
-+
-+ return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
-+}
-+
-+static int rtc_read_alarm(struct rtc_wkalrm *alrm)
-+{
-+ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
-+}
-+
-+static int rtc_set_alarm(struct rtc_wkalrm *alrm)
-+{
-+ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
-+}
-+
-+static int rtc_read_time(struct rtc_time *tm)
-+{
-+ return x1205_do_command(X1205_CMD_GETDATETIME, tm);
-+}
-+
-+static int rtc_set_time(struct rtc_time *tm)
-+{
-+ return x1205_do_command(X1205_CMD_SETDATETIME, tm);
-+}
-+
-+static struct rtc_ops rtc_ops = {
-+ .owner = THIS_MODULE,
-+ .read_time = rtc_read_time,
-+ .set_time = rtc_set_time,
-+ .read_alarm = rtc_read_alarm,
-+ .set_alarm = rtc_set_alarm,
-+};
-+
-+static int __init nslu2_rtc_init(void)
-+{
-+ int ret;
-+
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: rtc\n");
-+
-+ if ((ret = register_rtc(&rtc_ops)) != 0)
-+ return ret;
-+
-+ set_rtc = nslu2_set_rtc;
-+
-+ return 0;
-+}
-+
-+static void __exit nslu2_rtc_exit(void)
-+{
-+ set_rtc = NULL;
-+
-+ unregister_rtc(&rtc_ops);
-+}
-+
-+module_init(nslu2_rtc_init);
-+module_exit(nslu2_rtc_exit);
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 01:00:00.000000000 +0100
-+++ test14/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-06 21:29:53.000000000 +0200
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+//
-+//=============================================================================
-+// GPIO Function State
-+// 0 Red LED Status
-+// 1 Green LED Ready = 1
-+// 2 Disk 2 LED On = 0
-+// 3 Disk 1 LED On = 0
-+// 4 Buzzer
-+// 5 Power Button Pressed = 1
-+// 8 Power Down Output = 1 powers down NSLU2
-+// 12 Reset Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION "0.1.7"
-+
-+#define NSLU2BZ_MAJOR 62 //buzzer
-+#define NSLU2LM_MAJOR 126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG 2000
-+#define NSLU2_BEEP_DUR_MED 400
-+#define NSLU2_BEEP_DUR_SHORT 100
-+#define NSLU2_BEEP_PITCH_HIGH 250
-+#define NSLU2_BEEP_PITCH_MED 500
-+#define NSLU2_BEEP_PITCH_LOW 1000
-+#define NSLU2_LONG_DELAY 30000
-+
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
-+#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF _IOW('M',32,long)
-+#define NSLU2LM_ON _IOW('M',33,long)
-+#define NSLU2LM_BLINK _IOW('M',34,long)
-+#define NSLU2LM_ALT _IOW('M',35,long)
-+#define NSLU2LM_ALL_ON _IO('M',36)
-+#define NSLU2LM_ALL_OFF _IO('M',37)
-+
-+#define PHYS_LEDS 4
-+#define BLINK_DELAY 25
-+
-+// OR Masks to turn these LEDs ON
-+
-+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
-+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
-+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
-+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
-+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
-+#define RS_GRN_TGL 0x00000002
-+#define RS_RED_TGL 0x00000001
-+#define DISK1_TGL 0x00000008
-+#define DISK2_TGL 0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED 0
-+#define LED_RS_GRN 1
-+#define LED_DISK1 2
-+#define LED_DISK2 3
-+#define LED_ALL 4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer; //rs green
-+static struct timer_list n2lm_rsr_timer; //rs red
-+static struct timer_list n2lm_d1_timer; //drive 1
-+static struct timer_list n2lm_d2_timer; //drive 2
-+static struct timer_list n2bz_timer; //beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit. No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
-+ add_timer(&n2lm_rsg_timer); //reinit timer
-+ return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ return;
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+ switch(led) {
-+ case LED_RS_RED:
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ break;
-+
-+ case LED_RS_GRN:
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsg_timer);
-+ break;
-+
-+ case LED_DISK1:
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ break;
-+
-+ case LED_DISK2:
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+ switch (led) {
-+ case LED_RS_RED:
-+ del_timer(&n2lm_rsr_timer);
-+ break;
-+ case LED_RS_GRN:
-+ del_timer(&n2lm_rsg_timer);
-+ break;
-+ case LED_DISK1:
-+ del_timer(&n2lm_d1_timer);
-+ break;
-+ case LED_DISK2:
-+ del_timer(&n2lm_d2_timer);
-+ break;
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+ return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
-+ return;
-+ case LED_ALL: //all green
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+ return;
-+ }
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
-+ return;
-+ case LED_ALL:
-+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+ }
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+
-+ if (led < 0 || led >= PHYS_LEDS)
-+ return -EINVAL;
-+
-+ switch (cmd ) {
-+ case NSLU2LM_ON:
-+ n2lm_timer_stop(led);
-+ n2lm_ledon(led);
-+ break;
-+
-+ case NSLU2LM_OFF:
-+ n2lm_timer_stop(led);
-+ n2lm_ledoff(led);
-+ break;
-+
-+ case NSLU2LM_BLINK:
-+ n2lm_ledon(led);
-+ if (led == LED_RS_RED)
-+ n2lm_rsr_timer.data = RS_RED_TGL;
-+ n2lm_timer_start(led);
-+ break;
-+
-+ case NSLU2LM_ALT:
-+ if (led == LED_RS_RED)
-+ {
-+ n2lm_ledon(LED_RS_GRN);
-+ n2lm_ledoff(LED_RS_RED);
-+ n2lm_rsr_timer.data = RS_RG_ALT;
-+ n2lm_timer_start(LED_RS_RED);
-+ break;
-+ } else
-+ return -EINVAL;
-+
-+ case NSLU2LM_ALL_ON:
-+ n2lm_timer_stop_all();
-+ n2lm_ledon(LED_ALL);
-+ break;
-+
-+ case NSLU2LM_ALL_OFF:
-+ n2lm_timer_stop_all();
-+ n2lm_ledoff(LED_ALL);
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
-+// important should be haprepening.
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+ int i;
-+
-+ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+
-+ for (i = 1; i < duration; i++) {
-+ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ }
-+ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+ return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+ if (--bz_repeatcnt > 0) { //if just one beep left to do
-+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
-+ add_timer(&n2bz_timer); //reinit timer
-+ }
-+ n2_buzz(tone/2, ontime);
-+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+ switch (cmd) {
-+ case NSLU2BZ_BEEP:
-+ n2_buzz(tone/2, ontime);
-+ break;
-+
-+ case NSLU2BZ_BEEP_STOP:
-+ del_timer(&n2bz_timer);
-+ break;
-+
-+ case NSLU2BZ_BEEPS:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ n2bz_handler(0);
-+ break;
-+
-+ case NSLU2BZ_TONESET:
-+ if (param >= 250 && param <= 2000)
-+ tone = param;
-+ break;
-+
-+ case NSLU2BZ_ONTIME:
-+ if (param > 4 && param < 201)
-+ ontime = param;
-+ break;
-+
-+ case NSLU2BZ_SILENTTIME:
-+ if (param > ontime) //enforce a reasonable duty cycle
-+ offtime = param;
-+ else
-+ offtime = ontime;
-+ break;
-+
-+ case NSLU2BZ_REPEATCNT:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ break;
-+
-+ case NSLU2BZ_COMBINED:
-+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
-+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
-+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
-+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+ init_timer(&n2lm_rsg_timer);
-+ init_timer(&n2lm_rsr_timer);
-+ init_timer(&n2lm_d1_timer);
-+ init_timer(&n2lm_d2_timer);
-+
-+ n2lm_rsr_timer.function = n2lm_rsr_handler;
-+ n2lm_rsg_timer.function = n2lm_rsg_handler;
-+ n2lm_d2_timer.function = n2lm_d2_handler;
-+ n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+ init_timer(&n2bz_timer);
-+ n2bz_timer.function = n2bz_handler;
-+
-+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
-+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
-+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+ n2lm_ledon(LED_ALL);
-+ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+ n2lm_ledoff(LED_ALL);
-+
-+ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+ n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+
-+ n2iom_initarch();
-+
-+ n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ }
-+#endif
-+
-+ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ }
-+
-+ return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+
-+ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+ class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ test14/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-10-06 21:29:53.000000000 +0200
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-setup.c
-+ *
-+ * NSLU2 board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Mark Rakes <mrakes at mac.com>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
-+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data nslu2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource nslu2_flash_resource = {
-+ .start = NSLU2_FLASH_BASE,
-+ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device nslu2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_flash_data,
-+ .num_resources = 1,
-+ .resource = &nslu2_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+ .sda_pin = NSLU2_SDA_PIN,
-+ .scl_pin = NSLU2_SCL_PIN,
-+};
-+
-+static struct platform_device nslu2_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_i2c_gpio_pins,
-+ .num_resources = 0
-+};
-+
-+static struct resource nslu2_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port nslu2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device nslu2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = nslu2_uart_data,
-+ .num_resources = 2,
-+ .resource = nslu2_uart_resources
-+};
-+
-+static struct platform_device *nslu2_devices[] __initdata = {
-+ &nslu2_i2c_controller,
-+ &nslu2_flash,
-+ &nslu2_uart
-+};
-+
-+static void nslu2_power_off(void)
-+{
-+ /* This causes the box to drop the power and go dead. */
-+
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* do the deed */
-+ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init nslu2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pm_power_off = nslu2_power_off;
-+
-+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+}
-+
-+MACHINE_START(NSLU2, "Linksys NSLU2")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_ram = PHYS_OFFSET,
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq, /* FIXME: all irq are off here */
-+ .timer = &ixp4xx_timer,
-+ .init_machine = nslu2_init,
-+MACHINE_END
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ test14/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-10-06 21:29:53.000000000 +0200
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-pci.c
-+ *
-+ * NSLU2 board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init nslu2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
-+
-+ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-+ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-+ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-+
-+ /* INTD is not configured as GPIO is used
-+ * for the power input button.
-+ */
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-+ IRQ_NSLU2_PCI_INTA,
-+ IRQ_NSLU2_PCI_INTB,
-+ IRQ_NSLU2_PCI_INTC,
-+ };
-+
-+ int irq = -1;
-+
-+ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-+ irq = pci_irq_table[
-+ (slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
-+ }
-+
-+ return irq;
-+}
-+
-+struct hw_pci __initdata nslu2_pci = {
-+ .nr_controllers = 1,
-+ .preinit = nslu2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = nslu2_map_irq,
-+};
-+
-+int __init nslu2_pci_init(void) /* monkey see, monkey do */
-+{
-+ if (machine_is_nslu2())
-+ pci_common_init(&nslu2_pci);
-+
-+ return 0;
-+}
-+
-+subsys_initcall(nslu2_pci_init);
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 01:00:00.000000000 +0100
-+++ test14/arch/arm/mach-ixp4xx/nslu2-power.c 2005-10-06 21:39:43.000000000 +0200
-@@ -0,0 +1,92 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-power.c
-+ *
-+ * NSLU2 Power/Reset driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+
-+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* Signal init to do the ctrlaltdel action */
-+ kill_proc(1, SIGINT, 1);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* FIXME This doesn't reset the NSLU2. It powers it off.
-+ * Close enough, since reset is unreliable
-+ */
-+
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_power_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: power/reset\n");
-+
-+ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
-+
-+ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-+ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-+
-+ gpio_line_isr_clear(NSLU2_RB_GPIO);
-+ gpio_line_isr_clear(NSLU2_PB_GPIO);
-+
-+ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-+ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ NSLU2_RB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-+ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ NSLU2_PB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit nslu2_power_exit(void)
-+{
-+ free_irq(NSLU2_RB_IRQ, NULL);
-+ free_irq(NSLU2_PB_IRQ, NULL);
-+}
-+
-+module_init(nslu2_power_init);
-+module_exit(nslu2_power_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.14-rc3/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 01:00:00.000000000 +0100
-+++ test14/include/asm-arm/arch-ixp4xx/nslu2.h 2005-10-06 21:29:53.000000000 +0200
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nslu2.h
-+ *
-+ * NSLU2 platform specific definitions
-+ *
-+ * Author: Mark Rakes <mrakes AT mac.com>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * based on ixdp425.h:
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NSLU2_SDA_PIN 7
-+#define NSLU2_SCL_PIN 6
-+
-+/*
-+ * NSLU2 PCI IRQs
-+ */
-+#define NSLU2_PCI_MAX_DEV 3
-+#define NSLU2_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NSLU2_PCI_INTA_PIN 11
-+#define NSLU2_PCI_INTB_PIN 10
-+#define NSLU2_PCI_INTC_PIN 9
-+#define NSLU2_PCI_INTD_PIN 8
-+
-+
-+/* NSLU2 Timer */
-+#define NSLU2_FREQ 66000000
-+#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+
-+/* GPIO */
-+
-+#define NSLU2_GPIO0 0
-+#define NSLU2_GPIO1 1
-+#define NSLU2_GPIO2 2
-+#define NSLU2_GPIO3 3
-+#define NSLU2_GPIO4 4
-+#define NSLU2_GPIO5 5
-+#define NSLU2_GPIO6 6
-+#define NSLU2_GPIO7 7
-+#define NSLU2_GPIO8 8
-+#define NSLU2_GPIO9 9
-+#define NSLU2_GPIO10 10
-+#define NSLU2_GPIO11 11
-+#define NSLU2_GPIO12 12
-+#define NSLU2_GPIO13 13
-+#define NSLU2_GPIO14 14
-+#define NSLU2_GPIO15 15
-+
-+/* Buttons */
-+
-+#define NSLU2_PB_GPIO NSLU2_GPIO5
-+#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
-+#define NSLU2_RB_GPIO NSLU2_GPIO12
-+
-+#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
-+#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
-+
-+#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO)
-+#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO)
-+#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO)
-+
-+/* Buzzer */
-+
-+#define NSLU2_GPIO_BUZZ 4
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+/* LEDs */
-+
-+#define NSLU2_LED_RED NSLU2_GPIO0
-+#define NSLU2_LED_GRN NSLU2_GPIO1
-+
-+#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
-+#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
-+
-+#define NSLU2_LED_DISK1 NSLU2_GPIO2
-+#define NSLU2_LED_DISK2 NSLU2_GPIO3
-+
-+#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
-+#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
-+
-+
---- linux-2.6.14-rc3/arch/arm/Kconfig 2005-10-01 13:46:47.000000000 +0200
-+++ test14/arch/arm/Kconfig 2005-10-06 21:29:53.000000000 +0200
-@@ -389,7 +389,8 @@
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+ MACH_NSLU2
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-@@ -403,7 +404,7 @@
-
- config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- depends on LEDS
- default y if ARCH_EBSA110
- help
-@@ -419,7 +420,8 @@
-
- config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+ || MACH_NSLU2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
---- linux-2.6.14-rc3/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 01:00:00.000000000 +0100
-+++ test14/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-06 21:29:53.000000000 +0200
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ * Copyright (C) 1998-1999 Russell King
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED 0x01
-+#define LED_STATE_CLAIMED 0x02
-+#define LED_STATE_IDLE 0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+static const unsigned long idle_seq[4] = {
-+
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds_lock, flags);
-+
-+ switch (evt) {
-+ case led_start:
-+ /* Let's rock! Red led on, all others off. Remember
-+ * that disk1/disk2 works inverted. On the NSLU2, the
-+ * interface starts in a claimed state. XXX
-+ */
-+ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
-+ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+ | NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_stop:
-+ led_state &= ~LED_STATE_ENABLED;
-+ break;
-+
-+ case led_claim:
-+ /* The user claimed the interface, red and green off */
-+ led_state |= LED_STATE_CLAIMED;
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_release:
-+ /* The user released the interface, preserve the last
-+ * status of the leds, except red/green.
-+ */
-+ led_state &= ~LED_STATE_CLAIMED;
-+ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer:
-+ /* Pulse green led */
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ {
-+ /* clear red and green bits */
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+ /* copy the right sequence in */
-+ if (led_state & LED_STATE_IDLE)
-+ hw_led_state |= idle_seq[led_count % 4];
-+ else
-+ hw_led_state |= busy_seq[led_count % 4];
-+
-+ led_count++;
-+ }
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+
-+ case led_idle_start:
-+ led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red off */
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+
-+ case led_idle_end:
-+ led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red on -> amber on */
-+ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+#endif
-+
-+ case led_halted:
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ /* leds */
-+
-+ case led_green_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_green_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_amber_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_amber_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_red_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_red_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&leds_lock, flags);
-+
-+ if (led_state & LED_STATE_ENABLED) {
-+ spin_lock_irqsave(&gpio_lock, flags);
-+ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+ spin_unlock_irqrestore(&gpio_lock, flags);
-+ }
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+ void *ptr)
-+{
-+ leds_event(led_green_off);
-+ leds_event(led_red_on);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+ .notifier_call = nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: leds\n");
-+
-+ /* register panic notifier */
-+ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+ /* enable gpio 0-3 */
-+ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+ leds_event = nslu2_leds_event;
-+
-+ /* this will also initialize the leds to the
-+ * default state.
-+ */
-+
-+ leds_event(led_start);
-+
-+ return 0;
-+}
-+
-+module_init(nslu2_leds_init);
-+
--- /dev/null
+--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.171472071 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:52.923187955 -0700
+@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
+
+--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:19:43.443489188 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:23:52.923187955 -0700
+@@ -0,0 +1,113 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-rtc.c
++ *
++ * NSLU2 RTC driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on x1205-rtc.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/time.h>
++#include <linux/rtc.h>
++#include <linux/init.h>
++
++#include <linux/x1205.h>
++
++#include <asm/rtc.h>
++#include <asm/mach-types.h>
++
++extern int (*set_rtc)(void);
++
++static int nslu2_set_rtc(void)
++{
++ struct rtc_time new_tm, old_tm;
++ unsigned long cur_secs = xtime.tv_sec;
++
++ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
++ return 0;
++
++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
++ new_tm.tm_sec = cur_secs % 60;
++ cur_secs /= 60;
++ new_tm.tm_min = cur_secs % 60;
++ cur_secs /= 60;
++ new_tm.tm_hour = cur_secs % 24;
++
++ /*
++ * avoid writing when we're going to change the day
++ * of the month. We will retry in the next minute.
++ * This basically means that if the RTC must not drift
++ * by more than 1 minute in 11 minutes.
++ */
++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
++ return 1;
++
++ return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
++}
++
++static int rtc_read_alarm(struct rtc_wkalrm *alrm)
++{
++ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
++}
++
++static int rtc_set_alarm(struct rtc_wkalrm *alrm)
++{
++ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
++}
++
++static int rtc_read_time(struct rtc_time *tm)
++{
++ return x1205_do_command(X1205_CMD_GETDATETIME, tm);
++}
++
++static int rtc_set_time(struct rtc_time *tm)
++{
++ return x1205_do_command(X1205_CMD_SETDATETIME, tm);
++}
++
++static struct rtc_ops rtc_ops = {
++ .owner = THIS_MODULE,
++ .read_time = rtc_read_time,
++ .set_time = rtc_set_time,
++ .read_alarm = rtc_read_alarm,
++ .set_alarm = rtc_set_alarm,
++};
++
++static int __init nslu2_rtc_init(void)
++{
++ int ret;
++
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ printk(KERN_INFO "NSLU2: rtc\n");
++
++ if ((ret = register_rtc(&rtc_ops)) != 0)
++ return ret;
++
++ set_rtc = nslu2_set_rtc;
++
++ return 0;
++}
++
++static void __exit nslu2_rtc_exit(void)
++{
++ set_rtc = NULL;
++
++ unregister_rtc(&rtc_ops);
++}
++
++module_init(nslu2_rtc_init);
++module_exit(nslu2_rtc_exit);
-diff -urN -X linux-2.6.14-rc3/Documentation/dontdiff linux-2.6.14-rc3/drivers/input/misc/Kconfig test12/drivers/input/misc/Kconfig
---- linux-2.6.14-rc3/drivers/input/misc/Kconfig 2005-09-17 12:42:09.000000000 +0200
-+++ test12/drivers/input/misc/Kconfig 2005-10-03 23:26:15.000000000 +0200
-@@ -40,6 +40,18 @@
+--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/drivers/input/misc/Kconfig 2005-10-26 15:24:01.199708764 -0700
+@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support"
depends on M68K
config INPUT_UINPUT
tristate "User level driver support"
help
-diff -urN -X linux-2.6.14-rc3/Documentation/dontdiff linux-2.6.14-rc3/drivers/input/misc/Makefile test12/drivers/input/misc/Makefile
---- linux-2.6.14-rc3/drivers/input/misc/Makefile 2005-09-17 12:42:09.000000000 +0200
-+++ test12/drivers/input/misc/Makefile 2005-10-03 23:26:15.000000000 +0200
-@@ -10,3 +10,4 @@
+--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/drivers/input/misc/Makefile 2005-10-26 15:24:01.199708764 -0700
+@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
-diff -urN -X linux-2.6.14-rc3/Documentation/dontdiff linux-2.6.14-rc3/drivers/input/misc/nslu2spkr.c test12/drivers/input/misc/nslu2spkr.c
---- linux-2.6.14-rc3/drivers/input/misc/nslu2spkr.c 1970-01-01 01:00:00.000000000 +0100
-+++ test12/drivers/input/misc/nslu2spkr.c 2005-10-05 03:06:20.000000000 +0200
+--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c 2005-10-26 15:19:43.711506053 -0700
++++ linux-2.6.13/drivers/input/misc/nslu2spkr.c 2005-10-26 15:24:01.199708764 -0700
@@ -0,0 +1,144 @@
+/*
+ * drivers/input/misc/nslu2spkr.c
--- /dev/null
+--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.443489188 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:08.652177718 -0700
+@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
+
+--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:19:43.979522918 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:24:08.652177718 -0700
+@@ -0,0 +1,548 @@
++//=============================================================================
++//
++// n2-io.c version 0.1.7
++// Author: Karen Spearel <kas11 at tampabay.rr.com>
++// please report problems/bugs directly to the address above
++//
++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
++//
++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
++//
++//=============================================================================
++// GPIO Function State
++// 0 Red LED Status
++// 1 Green LED Ready = 1
++// 2 Disk 2 LED On = 0
++// 3 Disk 1 LED On = 0
++// 4 Buzzer
++// 5 Power Button Pressed = 1
++// 8 Power Down Output = 1 powers down NSLU2
++// 12 Reset Pressed = 0
++
++#include <linux/config.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/device.h>
++#include <linux/reboot.h>
++
++#include <asm/uaccess.h>
++#include <asm-arm/irq.h>
++#include <asm-arm/delay.h>
++
++/* Set this to 1 to output lots of debug messages. */
++#define NSLU2_IO_DEBUG 0
++
++#if NSLU2_IO_DEBUG
++#define nslu2_io_debug(args) printk args
++#else
++#define nslu2_io_debug(args) ((void)0)
++#endif
++
++#define VERSION "0.1.7"
++
++#define NSLU2BZ_MAJOR 62 //buzzer
++#define NSLU2LM_MAJOR 126
++
++
++#define NSLU2_BEEP_DUR_LONG 2000
++#define NSLU2_BEEP_DUR_MED 400
++#define NSLU2_BEEP_DUR_SHORT 100
++#define NSLU2_BEEP_PITCH_HIGH 250
++#define NSLU2_BEEP_PITCH_MED 500
++#define NSLU2_BEEP_PITCH_LOW 1000
++#define NSLU2_LONG_DELAY 30000
++
++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
++
++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
++
++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
++
++#define NSLU2LM_OFF _IOW('M',32,long)
++#define NSLU2LM_ON _IOW('M',33,long)
++#define NSLU2LM_BLINK _IOW('M',34,long)
++#define NSLU2LM_ALT _IOW('M',35,long)
++#define NSLU2LM_ALL_ON _IO('M',36)
++#define NSLU2LM_ALL_OFF _IO('M',37)
++
++#define PHYS_LEDS 4
++#define BLINK_DELAY 25
++
++// OR Masks to turn these LEDs ON
++
++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
++
++// AND Masks to turn these LEDs OFF
++
++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
++
++// AND Masks to turn these LEDs ON
++
++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
++
++// Or Masks to turn these LEDs OFF
++
++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
++
++// EOR masks for toggling LEDs on/off
++
++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
++#define RS_GRN_TGL 0x00000002
++#define RS_RED_TGL 0x00000001
++#define DISK1_TGL 0x00000008
++#define DISK2_TGL 0x00000004
++
++// The LED names for switches
++
++#define LED_RS_RED 0
++#define LED_RS_GRN 1
++#define LED_DISK1 2
++#define LED_DISK2 3
++#define LED_ALL 4
++
++static unsigned long ontime = 50;
++static unsigned long offtime = 450;
++static unsigned long bz_repeatcnt = 10;
++static unsigned long tone = 1000;
++
++static struct timer_list n2lm_rsg_timer; //rs green
++static struct timer_list n2lm_rsr_timer; //rs red
++static struct timer_list n2lm_d1_timer; //drive 1
++static struct timer_list n2lm_d2_timer; //drive 2
++static struct timer_list n2bz_timer; //beeper
++
++// sysfs class
++static struct class *n2lm_class;
++
++//==================================================================================================
++//
++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
++// GPIO output register is xor'd with a mask corresponding to the selected led which simply
++// flips that bit. No record of what any of the other leds is doing is needed.
++//
++//==================================================================================================
++// this blinks rs green or green/yellow if rs red is on
++#ifndef CONFIG_LEDS
++static void n2lm_rsg_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
++ add_timer(&n2lm_rsg_timer); //reinit timer
++ return;
++}
++
++// this blinks or alternates rs red green... inited wit green on/red off
++static void n2lm_rsr_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsr_timer);
++ return;
++}
++// blinks disk 1
++static void n2lm_d1_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d1_timer);
++ return;
++}
++// blinks disk 2
++static void n2lm_d2_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d2_timer);
++ return;
++}
++
++//==================================================================================================
++
++static void n2lm_timer_start(unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
++
++ switch(led) {
++ case LED_RS_RED:
++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsr_timer);
++ break;
++
++ case LED_RS_GRN:
++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsg_timer);
++ break;
++
++ case LED_DISK1:
++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d1_timer);
++ break;
++
++ case LED_DISK2:
++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d2_timer);
++ break;
++
++ default:
++ break;
++ }
++ return;
++}
++
++//==================================================================================================
++
++static void n2lm_timer_stop(unsigned long led)
++{
++ switch (led) {
++ case LED_RS_RED:
++ del_timer(&n2lm_rsr_timer);
++ break;
++ case LED_RS_GRN:
++ del_timer(&n2lm_rsg_timer);
++ break;
++ case LED_DISK1:
++ del_timer(&n2lm_d1_timer);
++ break;
++ case LED_DISK2:
++ del_timer(&n2lm_d2_timer);
++ break;
++ default:
++ break;
++ }
++ return;
++}
++
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_timer_stop_all(void)
++{
++ del_timer(&n2lm_rsg_timer);
++ del_timer(&n2lm_rsr_timer);
++ del_timer(&n2lm_d1_timer);
++ del_timer(&n2lm_d2_timer);
++ return;
++}
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_ledon(unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
++
++ switch (led) {
++ case LED_RS_RED:
++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
++ return;
++ case LED_RS_GRN:
++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
++ return;
++ case LED_DISK1:
++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
++ return;
++ case LED_DISK2:
++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
++ return;
++ case LED_ALL: //all green
++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
++ return;
++ }
++}
++
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_ledoff(unsigned long led)
++{
++
++ switch (led) {
++ case LED_RS_RED:
++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
++ return;
++ case LED_RS_GRN:
++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
++ return;
++ case LED_DISK1:
++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
++ return;
++ case LED_DISK2:
++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
++ return;
++ case LED_ALL:
++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
++ }
++}
++
++//==================================================================================================
++
++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
++
++ if (led < 0 || led >= PHYS_LEDS)
++ return -EINVAL;
++
++ switch (cmd ) {
++ case NSLU2LM_ON:
++ n2lm_timer_stop(led);
++ n2lm_ledon(led);
++ break;
++
++ case NSLU2LM_OFF:
++ n2lm_timer_stop(led);
++ n2lm_ledoff(led);
++ break;
++
++ case NSLU2LM_BLINK:
++ n2lm_ledon(led);
++ if (led == LED_RS_RED)
++ n2lm_rsr_timer.data = RS_RED_TGL;
++ n2lm_timer_start(led);
++ break;
++
++ case NSLU2LM_ALT:
++ if (led == LED_RS_RED)
++ {
++ n2lm_ledon(LED_RS_GRN);
++ n2lm_ledoff(LED_RS_RED);
++ n2lm_rsr_timer.data = RS_RG_ALT;
++ n2lm_timer_start(LED_RS_RED);
++ break;
++ } else
++ return -EINVAL;
++
++ case NSLU2LM_ALL_ON:
++ n2lm_timer_stop_all();
++ n2lm_ledon(LED_ALL);
++ break;
++
++ case NSLU2LM_ALL_OFF:
++ n2lm_timer_stop_all();
++ n2lm_ledoff(LED_ALL);
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static struct file_operations n2lm_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = n2lm_ioctl,
++};
++#endif
++//==================================================================================================
++// We can't do anything fancy here since the system tick rate is far below that required to
++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
++// important should be haprepening.
++//==================================================================================================
++
++static void n2_buzz(int tone_delay, int duration)
++{
++ int i;
++
++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
++
++ for (i = 1; i < duration; i++) {
++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
++ udelay(tone_delay);
++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
++ udelay(tone_delay);
++ }
++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
++
++ return;
++}
++//=================================================================================================
++
++// this handles the buzzer duty cycle
++static void n2bz_handler(unsigned long data)
++{
++ if (--bz_repeatcnt > 0) { //if just one beep left to do
++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
++ add_timer(&n2bz_timer); //reinit timer
++ }
++ n2_buzz(tone/2, ontime);
++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
++ return;
++}
++
++//==================================================================================================
++
++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
++{
++ switch (cmd) {
++ case NSLU2BZ_BEEP:
++ n2_buzz(tone/2, ontime);
++ break;
++
++ case NSLU2BZ_BEEP_STOP:
++ del_timer(&n2bz_timer);
++ break;
++
++ case NSLU2BZ_BEEPS:
++ if (param == 0)
++ bz_repeatcnt = 0xffffffff;
++ else
++ bz_repeatcnt = param;
++ n2bz_handler(0);
++ break;
++
++ case NSLU2BZ_TONESET:
++ if (param >= 250 && param <= 2000)
++ tone = param;
++ break;
++
++ case NSLU2BZ_ONTIME:
++ if (param > 4 && param < 201)
++ ontime = param;
++ break;
++
++ case NSLU2BZ_SILENTTIME:
++ if (param > ontime) //enforce a reasonable duty cycle
++ offtime = param;
++ else
++ offtime = ontime;
++ break;
++
++ case NSLU2BZ_REPEATCNT:
++ if (param == 0)
++ bz_repeatcnt = 0xffffffff;
++ else
++ bz_repeatcnt = param;
++ break;
++
++ case NSLU2BZ_COMBINED:
++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
++ break;
++
++ default:
++ break;
++ }
++ return 0;
++}
++
++static struct file_operations n2bz_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = n2bz_ioctl,
++};
++
++static void n2iom_initarch(void)
++{
++#ifndef CONFIG_LEDS
++ init_timer(&n2lm_rsg_timer);
++ init_timer(&n2lm_rsr_timer);
++ init_timer(&n2lm_d1_timer);
++ init_timer(&n2lm_d2_timer);
++
++ n2lm_rsr_timer.function = n2lm_rsr_handler;
++ n2lm_rsg_timer.function = n2lm_rsg_handler;
++ n2lm_d2_timer.function = n2lm_d2_handler;
++ n2lm_d1_timer.function = n2lm_d1_handler;
++#endif
++
++ init_timer(&n2bz_timer);
++ n2bz_timer.function = n2bz_handler;
++
++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
++
++#ifndef CONFIG_LEDS
++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
++ n2lm_ledon(LED_ALL);
++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
++ n2lm_ledoff(LED_ALL);
++
++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
++ n2lm_ledon(LED_RS_RED);
++#endif
++
++ return;
++}
++
++//==================================================================================================
++
++static int __init n2iom_init(void)
++{
++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
++
++ n2iom_initarch();
++
++ n2lm_class = class_create(THIS_MODULE, "nslu2");
++
++#ifndef CONFIG_LEDS
++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
++ return -EBUSY;
++ }
++ else {
++ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
++ }
++#endif
++
++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
++ return -EBUSY;
++ }
++ else {
++ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
++ }
++
++ return 0;
++}
++
++//==================================================================================================
++
++static void __exit n2iom_exit(void)
++{
++
++#ifndef CONFIG_LEDS
++ del_timer(&n2lm_rsg_timer);
++ del_timer(&n2lm_rsr_timer);
++ del_timer(&n2lm_d1_timer);
++ del_timer(&n2lm_d2_timer);
++
++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
++#endif
++
++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
++
++ class_destroy(n2lm_class);
++}
++
++module_init(n2iom_init);
++module_exit(n2iom_exit);
++
++MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
++MODULE_DESCRIPTION("NSLU2 I/O driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig 2005-10-26 15:19:34.490925838 -0700
++++ linux-2.6.13/arch/arm/Kconfig 2005-10-26 15:24:18.628805508 -0700
+@@ -389,7 +389,8 @@ config LEDS
+ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
+ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
+- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
++ MACH_NSLU2
+ help
+ If you say Y here, the LEDs on your machine will be used
+ to provide useful information about your current system status.
+@@ -403,7 +404,7 @@ config LEDS
+
+ config LEDS_TIMER
+ bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
+- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
+ depends on LEDS
+ default y if ARCH_EBSA110
+ help
+@@ -419,7 +420,8 @@ config LEDS_TIMER
+
+ config LEDS_CPU
+ bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
+- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
++ || MACH_NSLU2
+ depends on LEDS
+ help
+ If you say Y here, the red LED will be used to give a good real
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.979522918 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:18.632805759 -0700
+@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
+
++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
++obj-$(CONFIG_LEDS) += $(leds-y)
++
++
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:19:44.251540035 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:24:18.632805759 -0700
+@@ -0,0 +1,223 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-leds.c
++ *
++ * NSLU2 LEDs driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ * and arch/arm/mach-footbridge/netwinder-leds.c
++ * Copyright (C) 1998-1999 Russell King
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/notifier.h>
++
++#include <asm/hardware.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++#include <asm/system.h>
++
++#define LED_STATE_ENABLED 0x01
++#define LED_STATE_CLAIMED 0x02
++#define LED_STATE_IDLE 0x04
++
++static unsigned char led_state;
++static unsigned int hw_led_state;
++
++static const unsigned long idle_seq[4] = {
++
++ NSLU2_LED_GRN_BM, 0,
++ NSLU2_LED_GRN_BM, 0,
++};
++
++static const unsigned long busy_seq[4] = {
++
++ NSLU2_LED_GRN_BM, 0,
++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
++};
++
++static unsigned char led_count = 0;
++
++static DEFINE_SPINLOCK(leds_lock);
++extern spinlock_t gpio_lock;
++
++static void nslu2_leds_event(led_event_t evt)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&leds_lock, flags);
++
++ switch (evt) {
++ case led_start:
++ /* Let's rock! Red led on, all others off. Remember
++ * that disk1/disk2 works inverted. On the NSLU2, the
++ * interface starts in a claimed state. XXX
++ */
++ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
++ | NSLU2_LED_RED_BM;
++ break;
++
++ case led_stop:
++ led_state &= ~LED_STATE_ENABLED;
++ break;
++
++ case led_claim:
++ /* The user claimed the interface, red and green off */
++ led_state |= LED_STATE_CLAIMED;
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_release:
++ /* The user released the interface, preserve the last
++ * status of the leds, except red/green.
++ */
++ led_state &= ~LED_STATE_CLAIMED;
++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
++ break;
++
++#ifdef CONFIG_LEDS_TIMER
++ case led_timer:
++ /* Pulse green led */
++ if (!(led_state & LED_STATE_CLAIMED))
++ {
++ /* clear red and green bits */
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++
++ /* copy the right sequence in */
++ if (led_state & LED_STATE_IDLE)
++ hw_led_state |= idle_seq[led_count % 4];
++ else
++ hw_led_state |= busy_seq[led_count % 4];
++
++ led_count++;
++ }
++ break;
++#endif
++
++#ifdef CONFIG_LEDS_CPU
++
++ case led_idle_start:
++ led_state |= LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++ /* green on, red off */
++ hw_led_state |= NSLU2_LED_GRN_BM;
++ hw_led_state &= ~NSLU2_LED_RED_BM;
++#endif
++ break;
++
++ case led_idle_end:
++ led_state &= ~LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++ /* green on, red on -> amber on */
++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
++#endif
++ break;
++#endif
++
++ case led_halted:
++ if (!(led_state & LED_STATE_CLAIMED))
++ hw_led_state |= NSLU2_LED_RED_BM;
++ break;
++
++ /* leds */
++
++ case led_green_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= NSLU2_LED_GRN_BM;
++ break;
++
++ case led_green_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~NSLU2_LED_GRN_BM;
++ break;
++
++ case led_amber_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_amber_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_red_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= NSLU2_LED_RED_BM;
++ break;
++
++ case led_red_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~NSLU2_LED_RED_BM;
++ break;
++
++ default:
++ break;
++ }
++
++ spin_unlock_irqrestore(&leds_lock, flags);
++
++ if (led_state & LED_STATE_ENABLED) {
++ spin_lock_irqsave(&gpio_lock, flags);
++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
++ spin_unlock_irqrestore(&gpio_lock, flags);
++ }
++}
++
++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
++ void *ptr)
++{
++ leds_event(led_green_off);
++ leds_event(led_red_on);
++
++ return NOTIFY_DONE;
++}
++
++static struct notifier_block nslu2_leds_panic_block = {
++ .notifier_call = nslu2_leds_panic_event,
++};
++
++static int __init nslu2_leds_init(void)
++{
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ printk(KERN_INFO "NSLU2: leds\n");
++
++ /* register panic notifier */
++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
++
++ /* enable gpio 0-3 */
++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
++
++ leds_event = nslu2_leds_event;
++
++ /* this will also initialize the leds to the
++ * default state.
++ */
++
++ leds_event(led_start);
++
++ return 0;
++}
++
++module_init(nslu2_leds_init);
++
-diff -urpN linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c
---- linux-2.6.11.12/arch/arm/mach-ixp4xx/common-pci.c 2005-06-12 04:45:37.000000000 +0200
-+++ linux-2.6.11.12-le2/arch/arm/mach-ixp4xx/common-pci.c 2005-07-17 12:13:55.000000000 +0200
+--- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700
@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
#ifdef __ARMEB__
*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
#endif
pr_debug("DONE\n");
-
N2K_FILES = ""
N2K_PATCHES = "\
+ file://90-ixp4xx-pci-le.patch;patch=1 \
file://10-ixp4xx-copy-from.patch;patch=1 \
file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
file://15-ixp4xx-writesb-l-w.patch;patch=1 \
file://29-ipv4-route-c-spinlock.patch;patch=1 \
file://30-i2c-x1205.patch;patch=1 \
file://50-nslu2-arch.patch;patch=1 \
- file://50-nslu2-general.patch;patch=1 \
+"
+N2K_PATCHES_2 = "\
+ file://55-nslu2-rtc.patch;patch=1 \
file://60-nslu2-beeper.patch;patch=1 \
- file://90-ixp4xx-pci-le.patch;patch=1 \
+ file://70-nslu2-io.patch;patch=1 \
+ file://75-nslu2-leds.patch;patch=1 \
file://anonymiser.patch;patch=1 \
"
git.openpandora.org / openembedded.git / commitdiff