# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
# DISTRO_FEED = "unstable"
DISTRO_TYPE = "beta"
-SLUGOS_IMAGENAME = "debianslug"
-
-# debianslug builds a complete image (not just the parts)
-SLUGOS_FLASH_IMAGE = "1"
+SLUGOS_DISTRO = "debianslug"
#----------------------------------------------------------------------------------
# FIRMWARE CONFIGURATION
# g or u - glibc or uclibc libc implementation
# set TARGET_OS to match
#
-# The following names are deprecated:
-#
-# openslug - the historical name of a canonical slugos-bag distro
-# also the name of a standard slugos-bag distro with a package feed
-# ucslugc - the historical (and obsolete) name of slugos-btu
-# also the name of a standard slugos-btu distro with a package feed
-#
#----------------------------------------------------------------------------------
# STANDARD SLUGOS DEFINITIONS
# DISTRO_FEED ?= "${SLUGOS_VERSION}-${DISTRO_TYPE}"
DISTRO_FEED ?= "unstable"
+SLUGOS_DISTRO ?= "slugos"
+
+IMAGE_BASENAME = "${SLUGOS_DISTRO}"
+
# The following must also be set, they define the basic format of the build
#
#ARM_INSTRUCTION_SET "arm" or "thumb"
-fno-unroll-loops -fno-inline-functions \
-fweb -funit-at-a-time"
-# packages/meta/slugos-image.bb generates a binary image of the root file system
-# with a name controlled by the following setting - it defaults to the top level
-# ${DISTRO_NAME} and this should always be correct, but it may be too specific (e.g.
-# if you change the DISTRO from one of the standard ones in a way which does not
-# change the generated image).
-SLUGOS_IMAGENAME ?= "${DISTRO_NAME}"
-
-# pull in the frozen list of bbfiles - this sets BBFILES and this will override any
-# setting in local.conf Since this depends on ${DISTRO} it doesn't actually do
-# anything by default unless conf/distro/${DISTRO}-packages.conf exists.
-# require conf/distro/include/freeze.conf
-
#----------------------------------------------------------------------------------
# FEEDS
# The FEED_URIS lines define where on the internet SlugOS looks for packages
# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf)
CMDLINE_DEBUG = "noirqdebug"
-# Building a full image. If you set SLUGOS_FLASH_IMAGE to "nslu2" a complete
-# 8MByte flash image will be built after the rootfs JFFS2 image. Other options
-# may later be defined for other vendor-flashable image types.
-#
-# If you do this you will need to find a source for the LinkSys software to be
-# placed in the full image - 'RedBoot' (the boot loader), 'Trailer' (just a bunch
-# of bytes to flag the image as valid) and 'SysConf' (actually just a block of
-# unset data - you could modify this to pre-configure the SysConf partition of the
-# image). If you own an NSLU2 then this data is already in the flash of the NSLU2
-# and you can download it (including new versions) from the LinkSys web site - see
-# packages/meta/slugos-image.bb for information about where to put the downloaded
-# data.
-SLUGOS_FLASH_IMAGE ?= "no"
-
# EXTRA PACKAGES
# --------------
# SlugOS builds an image with no extra packages - to add packages to the
PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-# compiler/binary/library versions (unslung uses different ones so these
-# cannot be in ${MACHINE}.conf)
+# compiler/binary/library versions
PREFERRED_VERSION_binutils ?= "2.16"
PREFERRED_VERSION_binutils-cross ?= "2.16"
PREFERRED_VERSION_gcc-cross-initial ?= "4.1.1"
# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
# DISTRO_FEED = "unstable"
DISTRO_TYPE = "beta"
-SLUGOS_IMAGENAME = "openslug"
-
-# openslug builds a complete image (not just the parts)
-SLUGOS_FLASH_IMAGE = "1"
+SLUGOS_DISTRO = "openslug"
#----------------------------------------------------------------------------------
# FIRMWARE CONFIGURATION
# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
# DISTRO_FEED = "unstable"
DISTRO_TYPE = "beta"
-SLUGOS_IMAGENAME = "ucslugc"
+SLUGOS_DISTRO = "ucslugc"
PREFERRED_VERSION_gcc-cross-initial = "3.4.4"
PREFERRED_VERSION_gcc-cross = "3.4.4"
PR = "r0"
DEPENDS = "${MACHINE_TASK_PROVIDER}"
-# SLUGOS_IMAGENAME defines the name of the image to be build, if it
-# is not set this package will be skipped!
EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x10000 -D ${SLUGOS_DEVICE_TABLE}"
IMAGE_LINGUAS = ""
HOMEPAGE = "http://www.nslu2-linux.org"
LICENSE = "MIT"
PR = "r44"
+PROVIDES += "${SLUGOS_DISTRO}-image"
COMPATIBLE_MACHINE = "nslu2"
-# SLUGOS_IMAGENAME defines the name of the image to be build, if it
-# is not set this package will be skipped!
-IMAGE_BASENAME = "${SLUGOS_IMAGENAME}"
IMAGE_NAME = "${IMAGE_BASENAME}-${MACHINE}-${DISTRO_VERSION}"
IMAGE_FSTYPES = "jffs2"
EXTRA_IMAGECMD_jffs2 += " -D ${SLUGOS_DEVICE_TABLE}"
IMAGE_PREPROCESS_COMMAND += "rm ${IMAGE_ROOTFS}/boot/zImage*;"
IMAGE_PREPROCESS_COMMAND += "install -c -m 644 ${SLUGOS_DEVICE_TABLE} ${IMAGE_ROOTFS}/etc/device_table;"
-# Building a full image. If required do a post-process command which builds
-# the full flash image using slugimage. At present this only works for NSLU2 images.
-PACK_IMAGE = ""
-IMAGE_POSTPROCESS_COMMAND += "${PACK_IMAGE}"
-PACK_IMAGE_DEPENDS = ""
-EXTRA_IMAGEDEPENDS += "${PACK_IMAGE_DEPENDS}"
-
# This hack removes '${MACHINE}' from the end of the arch.conf for ipk,
# preventing _mach.ipk (with no byte sex) taking precedence over everything
# else.
ROOTFS_POSTPROCESS_COMMAND += "sed -i '$d' '${IMAGE_ROOTFS}/etc/ipkg/arch.conf';"
-# These depends define native utilities - they do not get put in the flash and
-# are not required to build the image.
-IMAGE_TOOLS = ""
-EXTRA_IMAGEDEPENDS += "${IMAGE_TOOLS}"
-
# CONFIG:
# SLUGOS_EXTRA_RDEPENDS: set in conf, things to add to the image
# SLUGOS_SUPPORT: set here, see below, added to the image.
inherit image
-python () {
- # Don't build slugos images unless the configuration is set up
- # for an image build!
- if bb.data.getVar("SLUGOS_IMAGENAME", d, 1) == '':
- raise bb.parse.SkipPackage("absent or broken SlugOS configuration")
-}
-
-#--------------------------------------------------------------------------------
-# NSLU2 specific
-#
#NOTE: you do not actually need the boot loader in normal use because it is
# *not* overwritten by a standard upslug upgrade, so you can make an image with
# just non-LinkSys software which can be flashed into the NSLU2. Because
# LinkSys have made "EraseAll" available, however, (this does overwrite RedBoot)
# it is a bad idea to produce flash images without a valid RedBoot - that allows
# an innocent user upgrade attempt to instantly brick the NSLU2.
-PACK_IMAGE += "${@['', 'slugos_pack_image;'][bb.data.getVar('SLUGOS_FLASH_IMAGE', d, 1) == '1']}"
-PACK_IMAGE_DEPENDS += "${@['', 'slugimage-native nslu2-linksys-firmware ixp4xx-npe'][bb.data.getVar('SLUGOS_FLASH_IMAGE', d, 1) == '1']}"
+IMAGE_POSTPROCESS_COMMAND += "slugos_pack_image;"
+EXTRA_IMAGEDEPENDS += "slugimage-native nslu2-linksys-firmware ixp4xx-npe upslug2-native"
NSLU2_SLUGIMAGE_ARGS ?= ""
slugos_pack_image() {
-C ${DEPLOY_DIR_IMAGE} firmupgrade
rm -rf ${DEPLOY_DIR_IMAGE}/firmupgrade
}
-
-# upslug2 (in tmp/work/upslug2-native-*) is the program to write the NSLU2 flash
-IMAGE_TOOLS_nslu2 = "upslug2-native"
+++ /dev/null
-# This is an inglorious hack to provide a package to match
-# ${SLUGOS_IMAGENAME}-image
-LICENSE = "MIT"
-PN = "${SLUGOS_IMAGENAME}-image"
-PV = "0"
-PR = "r0"
-DEPENDS = "slugos-image"
-PACKAGES = ""
-INHIBIT_DEFAULT_DEPS = "1"
-
-SLUGOS_IMAGENAME ?= "slugos"
-COMPATIBLE_MACHINE = "nslu2"
-
-do_fetch() {
-}
-do_unpack() {
-}
-do_patch() {
-}
-do_configure() {
-}
-do_compile() {
-}
-do_install() {
-}
-do_stage() {
-}
-do_build() {
-}
EXCLUDE_FROM_WORLD = "1"
ALLOW_EMPTY = "1"
PACKAGES = "${PN}"
-PROVIDES += "${SLUGOS_IMAGENAME}-native"
+PROVIDES += "${SLUGOS_DISTRO}-native"
# Run-time only (RDEPENDS) stuff - no package explicitly provides
# these targets.
LICENSE = "MIT"
PR = "r17"
CONFLICTS = "db3"
-PROVIDES += "${SLUGOS_IMAGENAME}-packages"
+PROVIDES += "${SLUGOS_DISTRO}-packages"
COMPATIBLE_MACHINE = "nslu2"
EXCLUDE_FROM_WORLD = "1"
git.openpandora.org / openembedded.git / commitdiff