--- /dev/null
+From a08be3ba79daf13baca6de98249c8784ede31297 Mon Sep 17 00:00:00 2001
+From: Radek Polak <psonek2@seznam.cz>
+Date: Fri, 9 Apr 2010 09:15:40 +0200
+Subject: [PATCH 17/22] accels.patch
+
+adds support for accelerometers. You will need include/linux/lis302dl.h and
+drivers/input/misc/lis302dl.c from andy-tracking. The patch needs
+spi_bitbang_transfer_sync() and bitbang_work() to be ported correctly (some
+fixes from original 2.6.32 are missing).
+
+Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
+---
+ arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 3 +-
+ arch/arm/mach-s3c2442/mach-gta02.c | 157 ++++
+ drivers/input/misc/Kconfig | 9 +
+ drivers/input/misc/Makefile | 1 +
+ drivers/input/misc/lis302dl.c | 952 +++++++++++++++++++++++++
+ drivers/spi/spi_bitbang.c | 231 ++++---
+ drivers/spi/spi_s3c24xx_gpio.c | 7 +-
+ include/linux/lis302dl.h | 152 ++++
+ include/linux/spi/spi.h | 30 +
+ include/linux/spi/spi_bitbang.h | 5 +
+ 10 files changed, 1433 insertions(+), 114 deletions(-)
+ create mode 100644 drivers/input/misc/lis302dl.c
+ create mode 100644 include/linux/lis302dl.h
+
+diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+index 980a099..0ff8949 100644
+--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
++++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+@@ -21,7 +21,8 @@ struct s3c2410_spigpio_info {
+ int num_chipselect;
+ int bus_num;
+
+- void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
++ int non_blocking_transfer;
++ void (*chip_select)(struct s3c2410_spigpio_info *spi, int csid, int cs);
+ };
+
+
+diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
+index b580b1b..8e3cc91 100644
+--- a/arch/arm/mach-s3c2442/mach-gta02.c
++++ b/arch/arm/mach-s3c2442/mach-gta02.c
+@@ -63,6 +63,7 @@
+
+ #include <linux/input.h>
+ #include <linux/gpio_keys.h>
++#include <linux/lis302dl.h>
+
+ #include <linux/leds.h>
+ #include <linux/leds_pwm.h>
+@@ -120,6 +121,22 @@
+ #include <linux/input/touchscreen/ts_filter_group.h>
+ #endif
+
++#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
++
++#define S3C2410_GPIO_BANKD (32*3)
++#define S3C2410_GPIO_BANKG (32*6)
++
++#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
++#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
++#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
++#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
++#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
++
++#define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */
++#define BITBANG_CS_INACTIVE 0
++
++#define S3C_SYSTEM_REV_ATAG GTA02v6_SYSTEM_REV
++
+ struct pcf50633 *gta02_pcf;
+
+ /*
+@@ -776,6 +793,60 @@ const struct jbt6k74_platform_data jbt6k74_pdata = {
+ .gpio_reset = GTA02_GPIO_GLAMO(4),
+ };
+
++/*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
++
++void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
++{
++ struct lis302dl_platform_data *pdata = lis->pdata;
++
++ if (!resume) {
++ /*
++ * we don't want to power them with a high level
++ * because GSENSOR_3V3 is not up during suspend
++ */
++ s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
++ s3c2410_gpio_setpin(pdata->pin_clk, 0);
++ s3c2410_gpio_setpin(pdata->pin_mosi, 0);
++ /* misnomer: it is a pullDOWN in 2442 */
++ s3c2410_gpio_pullup(pdata->pin_miso, 1);
++ return;
++ }
++
++ /* back to normal */
++ s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
++ s3c2410_gpio_setpin(pdata->pin_clk, 1);
++ /* misnomer: it is a pullDOWN in 2442 */
++ s3c2410_gpio_pullup(pdata->pin_miso, 0);
++
++ s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
++ s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
++ s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
++ s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
++
++}
++
++struct lis302dl_platform_data lis302_pdata_top = {
++ .name = "lis302-1 (top)",
++ .pin_chip_select= S3C2410_GPD12,
++ .pin_clk = S3C2410_GPG7,
++ .pin_mosi = S3C2410_GPG6,
++ .pin_miso = S3C2410_GPG5,
++ .interrupt = GTA02_IRQ_GSENSOR_1,
++ .open_drain = 1, /* altered at runtime by PCB rev */
++ .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
++};
++
++struct lis302dl_platform_data lis302_pdata_bottom = {
++ .name = "lis302-2 (bottom)",
++ .pin_chip_select= S3C2410_GPD13,
++ .pin_clk = S3C2410_GPG7,
++ .pin_mosi = S3C2410_GPG6,
++ .pin_miso = S3C2410_GPG5,
++ .interrupt = GTA02_IRQ_GSENSOR_2,
++ .open_drain = 1, /* altered at runtime by PCB rev */
++ .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
++};
++
+ static struct spi_board_info gta02_spi_board_info[] = {
+ {
+ .modalias = "jbt6k74",
+@@ -786,6 +857,81 @@ static struct spi_board_info gta02_spi_board_info[] = {
+ .bus_num = 2,
+ .chip_select = 0
+ },
++ {
++ .modalias = "lis302dl",
++ /* platform_data */
++ .platform_data = &lis302_pdata_top,
++ /* controller_data */
++ /* irq */
++ .max_speed_hz = 100 * 1000,
++ .bus_num = 3,
++ .chip_select = 0,
++ },
++ {
++ .modalias = "lis302dl",
++ /* platform_data */
++ .platform_data = &lis302_pdata_bottom,
++ /* controller_data */
++ /* irq */
++ .max_speed_hz = 100 * 1000,
++ .bus_num = 3,
++ .chip_select = 1,
++ },
++};
++
++static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
++{
++
++ /*
++ * Huh... "quirk"... CS on this device is not really "CS" like you can
++ * expect.
++ *
++ * When it is 0 it selects SPI interface mode.
++ * When it is 1 it selects I2C interface mode.
++ *
++ * Because we have 2 devices on one interface we have to make sure
++ * that the "disabled" device (actually in I2C mode) don't think we're
++ * talking to it.
++ *
++ * When we talk to the "enabled" device, the "disabled" device sees
++ * the clocks as I2C clocks, creating havoc.
++ *
++ * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
++ * must ensure this is never issued.
++ */
++
++ int cs_gpio, other_cs_gpio;
++
++ cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
++ other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
++
++
++ if (cs == BITBANG_CS_ACTIVE) {
++ s3c2410_gpio_setpin(other_cs_gpio, 1);
++ s3c2410_gpio_setpin(cs_gpio, 1);
++ s3c2410_gpio_setpin(info->pin_clk, 1);
++ s3c2410_gpio_setpin(cs_gpio, 0);
++ } else {
++ s3c2410_gpio_setpin(cs_gpio, 1);
++ s3c2410_gpio_setpin(other_cs_gpio, 1);
++ }
++}
++
++static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
++ .pin_clk = S3C2410_GPG7,
++ .pin_mosi = S3C2410_GPG6,
++ .pin_miso = S3C2410_GPG5,
++ .bus_num = 3,
++ .num_chipselect = 2,
++ .chip_select = gta02_lis302_chip_select,
++ .non_blocking_transfer = 1,
++};
++
++static struct platform_device gta02_spi_gpio_dev = {
++ .name = "spi_s3c24xx_gpio",
++ .dev = {
++ .platform_data = >a02_spigpio_cfg,
++ },
+ };
+
+ /* BQ27000 Battery */
+@@ -1136,6 +1282,7 @@ static struct platform_device *gta02_devices[] __initdata = {
+ static struct platform_device *gta02_devices_pmu_children[] = {
+ &s3c_device_ts,
+ >a02_glamo_dev,
++ >a02_spi_gpio_dev,
+ &s3c_device_timer[2],
+ >a02_hdq_device,
+ >a02_gps_userspace_consumer
+@@ -1362,6 +1509,16 @@ static void __init gta02_machine_init(void)
+ /* Set the panic callback to make AUX LED blink at ~5Hz. */
+ panic_blink = gta02_panic_blink;
+
++ switch (S3C_SYSTEM_REV_ATAG) {
++ case GTA02v6_SYSTEM_REV:
++ /* we need push-pull interrupt from motion sensors */
++ lis302_pdata_top.open_drain = 0;
++ lis302_pdata_bottom.open_drain = 0;
++ break;
++ default:
++ break;
++ }
++
+ s3c_device_ts.name = "s3c2440-ts";
+
+ bus_register_notifier(&platform_bus_type, >a02_device_register_notifier);
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index a9bb254..2e9bc5d 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -317,4 +317,13 @@ config INPUT_PCAP
+ To compile this driver as a module, choose M here: the
+ module will be called pcap_keys.
+
++config INPUT_LIS302DL
++ tristate "STmicro LIS302DL 3-axis accelerometer"
++ depends on SPI_MASTER
++ help
++ SPI driver for the STmicro LIS302DL 3-axis accelerometer.
++
++ The userspece interface is a 3-axis (X/Y/Z) relative movement
++ Linux input device, reporting REL_[XYZ] events.
++
+ endif
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index a8b8485..7e63293 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o
+ obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
+ obj-$(CONFIG_INPUT_YEALINK) += yealink.o
++obj-$(CONFIG_INPUT_LIS302DL) += lis302dl.o
+
+diff --git a/drivers/input/misc/lis302dl.c b/drivers/input/misc/lis302dl.c
+new file mode 100644
+index 0000000..d345bfb
+--- /dev/null
++++ b/drivers/input/misc/lis302dl.c
+@@ -0,0 +1,952 @@
++/* Linux kernel driver for the ST LIS302D 3-axis accelerometer
++ *
++ * Copyright (C) 2007-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * converted to private bitbang by:
++ * Andy Green <andy@openmoko.com>
++ * ability to set acceleration threshold added by:
++ * Simon Kagstrom <simon.kagstrom@gmail.com>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ * TODO
++ * * statistics for overflow events
++ * * configuration interface (sysfs) for
++ * * enable/disable x/y/z axis data ready
++ * * enable/disable resume from freee fall / click
++ * * free fall / click parameters
++ * * high pass filter parameters
++ */
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++#include <linux/sysfs.h>
++#include <linux/spi/spi.h>
++
++#include <linux/lis302dl.h>
++
++/* Utility functions */
++static u8 __reg_read(struct lis302dl_info *lis, u8 reg)
++{
++ struct spi_message msg;
++ struct spi_transfer t;
++ u8 data[2] = {0xc0 | reg};
++ int rc;
++
++ spi_message_init(&msg);
++ memset(&t, 0, sizeof t);
++ t.len = 2;
++ spi_message_add_tail(&t, &msg);
++ t.tx_buf = &data[0];
++ t.rx_buf = &data[0];
++
++ /* Should complete without blocking */
++ rc = spi_non_blocking_transfer(lis->spi, &msg);
++ if (rc < 0) {
++ dev_err(lis->dev, "Error reading register\n");
++ return rc;
++ }
++
++ return data[1];
++}
++
++static void __reg_write(struct lis302dl_info *lis, u8 reg, u8 val)
++{
++ struct spi_message msg;
++ struct spi_transfer t;
++ u8 data[2] = {reg, val};
++
++ spi_message_init(&msg);
++ memset(&t, 0, sizeof t);
++ t.len = 2;
++ spi_message_add_tail(&t, &msg);
++ t.tx_buf = &data[0];
++ t.rx_buf = &data[0];
++
++ /* Completes without blocking */
++ if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
++ dev_err(lis->dev, "Error writing register\n");
++}
++
++static void __reg_set_bit_mask(struct lis302dl_info *lis, u8 reg, u8 mask,
++ u8 val)
++{
++ u_int8_t tmp;
++
++ val &= mask;
++
++ tmp = __reg_read(lis, reg);
++ tmp &= ~mask;
++ tmp |= val;
++ __reg_write(lis, reg, tmp);
++}
++
++static int __ms_to_duration(struct lis302dl_info *lis, int ms)
++{
++ /* If we have 400 ms sampling rate, the stepping is 2.5 ms,
++ * on 100 ms the stepping is 10ms */
++ if (lis->flags & LIS302DL_F_DR)
++ return min((ms * 10) / 25, 637);
++
++ return min(ms / 10, 2550);
++}
++
++static int __duration_to_ms(struct lis302dl_info *lis, int duration)
++{
++ if (lis->flags & LIS302DL_F_DR)
++ return (duration * 25) / 10;
++
++ return duration * 10;
++}
++
++static u8 __mg_to_threshold(struct lis302dl_info *lis, int mg)
++{
++ /* If FS is set each bit is 71mg, otherwise 18mg. The THS register
++ * has 7 bits for the threshold value */
++ if (lis->flags & LIS302DL_F_FS)
++ return min(mg / 71, 127);
++
++ return min(mg / 18, 127);
++}
++
++static int __threshold_to_mg(struct lis302dl_info *lis, u8 threshold)
++{
++ if (lis->flags & LIS302DL_F_FS)
++ return threshold * 71;
++
++ return threshold * 18;
++}
++
++/* interrupt handling related */
++
++enum lis302dl_intmode {
++ LIS302DL_INTMODE_GND = 0x00,
++ LIS302DL_INTMODE_FF_WU_1 = 0x01,
++ LIS302DL_INTMODE_FF_WU_2 = 0x02,
++ LIS302DL_INTMODE_FF_WU_12 = 0x03,
++ LIS302DL_INTMODE_DATA_READY = 0x04,
++ LIS302DL_INTMODE_CLICK = 0x07,
++};
++
++static void __lis302dl_int_mode(struct device *dev, int int_pin,
++ enum lis302dl_intmode mode)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++ switch (int_pin) {
++ case 1:
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
++ break;
++ case 2:
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
++ break;
++ default:
++ BUG();
++ }
++}
++
++static void __enable_wakeup(struct lis302dl_info *lis)
++{
++ __reg_write(lis, LIS302DL_REG_CTRL1, 0);
++
++ /* First zero to get to a known state */
++ __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, LIS302DL_FFWUCFG_XHIE |
++ LIS302DL_FFWUCFG_YHIE | LIS302DL_FFWUCFG_ZHIE |
++ LIS302DL_FFWUCFG_LIR);
++ __reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
++ __mg_to_threshold(lis, lis->wakeup.threshold));
++ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++ __ms_to_duration(lis, lis->wakeup.duration));
++
++ /* Route the interrupt for wakeup */
++ __lis302dl_int_mode(lis->dev, 1,
++ LIS302DL_INTMODE_FF_WU_1);
++
++ __reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
++ __reg_read(lis, LIS302DL_REG_OUT_X);
++ __reg_read(lis, LIS302DL_REG_OUT_Y);
++ __reg_read(lis, LIS302DL_REG_OUT_Z);
++ __reg_read(lis, LIS302DL_REG_STATUS);
++ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
++ __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | 7);
++}
++
++static void __enable_data_collection(struct lis302dl_info *lis)
++{
++ u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen |
++ LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen;
++
++ /* make sure we're powered up and generate data ready */
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
++
++ /* If the threshold is zero, let the device generated an interrupt
++ * on each datum */
++ if (lis->threshold == 0) {
++ __reg_write(lis, LIS302DL_REG_CTRL2, 0);
++ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
++ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
++ } else {
++ __reg_write(lis, LIS302DL_REG_CTRL2,
++ LIS302DL_CTRL2_HPFF1);
++ __reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
++ __mg_to_threshold(lis, lis->threshold));
++ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++ __ms_to_duration(lis, lis->duration));
++
++ /* Clear the HP filter "starting point" */
++ __reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
++ __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
++ LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE |
++ LIS302DL_FFWUCFG_ZHIE | LIS302DL_FFWUCFG_LIR);
++ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12);
++ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12);
++ }
++}
++
++#if 0
++static void _report_btn_single(struct input_dev *inp, int btn)
++{
++ input_report_key(inp, btn, 1);
++ input_sync(inp);
++ input_report_key(inp, btn, 0);
++}
++
++static void _report_btn_double(struct input_dev *inp, int btn)
++{
++ input_report_key(inp, btn, 1);
++ input_sync(inp);
++ input_report_key(inp, btn, 0);
++ input_sync(inp);
++ input_report_key(inp, btn, 1);
++ input_sync(inp);
++ input_report_key(inp, btn, 0);
++}
++#endif
++
++
++static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis)
++{
++ u8 data[(LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS) + 2] = {0xC0 | LIS302DL_REG_STATUS};
++ u8 *read = data + 1;
++ unsigned long flags;
++ int mg_per_sample = __threshold_to_mg(lis, 1);
++ struct spi_message msg;
++ struct spi_transfer t;
++
++ spi_message_init(&msg);
++ memset(&t, 0, sizeof t);
++ t.len = sizeof(data);
++ spi_message_add_tail(&t, &msg);
++ t.tx_buf = &data[0];
++ t.rx_buf = &data[0];
++
++ /* grab the set of register containing status and XYZ data */
++
++ local_irq_save(flags);
++
++ /* Should complete without blocking */
++ if (spi_non_blocking_transfer(lis->spi, &msg) < 0)
++ dev_err(lis->dev, "Error reading registers\n");
++
++ local_irq_restore(flags);
++
++ /*
++ * at the minute the test below fails 50% of the time due to
++ * a problem with level interrupts causing ISRs to get called twice.
++ * This is a workaround for that, but actually this test is still
++ * valid and the information can be used for overrrun stats.
++ */
++
++ /* has any kind of overrun been observed by the lis302dl? */
++ if (read[0] & (LIS302DL_STATUS_XOR |
++ LIS302DL_STATUS_YOR |
++ LIS302DL_STATUS_ZOR))
++ lis->overruns++;
++
++ /* we have a valid sample set? */
++ if (read[0] & LIS302DL_STATUS_XYZDA) {
++ input_report_abs(lis->input_dev, ABS_X, mg_per_sample *
++ (s8)read[LIS302DL_REG_OUT_X - LIS302DL_REG_STATUS]);
++ input_report_abs(lis->input_dev, ABS_Y, mg_per_sample *
++ (s8)read[LIS302DL_REG_OUT_Y - LIS302DL_REG_STATUS]);
++ input_report_abs(lis->input_dev, ABS_Z, mg_per_sample *
++ (s8)read[LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS]);
++
++ input_sync(lis->input_dev);
++ }
++
++ if (lis->threshold)
++ /* acknowledge the wakeup source */
++ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++}
++
++static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
++{
++ struct lis302dl_info *lis = _lis;
++
++ lis302dl_bitbang_read_sample(lis);
++ return IRQ_HANDLED;
++}
++
++/* sysfs */
++
++static ssize_t show_overruns(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%u\n", lis->overruns);
++}
++
++static DEVICE_ATTR(overruns, S_IRUGO, show_overruns, NULL);
++
++static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ u8 ctrl1;
++ unsigned long flags;
++
++ local_irq_save(flags);
++ ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
++ local_irq_restore(flags);
++
++ return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
++}
++
++static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ if (!strcmp(buf, "400\n")) {
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
++ LIS302DL_CTRL1_DR);
++ lis->flags |= LIS302DL_F_DR;
++ } else {
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
++ 0);
++ lis->flags &= ~LIS302DL_F_DR;
++ }
++ local_irq_restore(flags);
++
++ return count;
++}
++
++static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate);
++
++static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ u_int8_t ctrl1;
++ unsigned long flags;
++
++ local_irq_save(flags);
++ ctrl1 = __reg_read(lis, LIS302DL_REG_CTRL1);
++ local_irq_restore(flags);
++
++ return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
++}
++
++static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ if (!strcmp(buf, "9.2\n")) {
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
++ LIS302DL_CTRL1_FS);
++ lis->flags |= LIS302DL_F_FS;
++ } else {
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
++ 0);
++ lis->flags &= ~LIS302DL_F_FS;
++ }
++
++ if (lis->flags & LIS302DL_F_INPUT_OPEN)
++ __enable_data_collection(lis);
++
++ local_irq_restore(flags);
++
++ return count;
++}
++
++static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
++
++static ssize_t show_threshold(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++ /* Display the device view of the threshold setting */
++ return sprintf(buf, "%d\n", __threshold_to_mg(lis,
++ __mg_to_threshold(lis, lis->threshold)));
++}
++
++static ssize_t set_threshold(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ unsigned int val;
++
++ if (sscanf(buf, "%u\n", &val) != 1)
++ return -EINVAL;
++ /* 8g is the maximum if FS is 1 */
++ if (val > 8000)
++ return -ERANGE;
++
++ /* Set the threshold and write it out if the device is used */
++ lis->threshold = val;
++
++ if (lis->flags & LIS302DL_F_INPUT_OPEN) {
++ unsigned long flags;
++
++ local_irq_save(flags);
++ __enable_data_collection(lis);
++ local_irq_restore(flags);
++ }
++
++ return count;
++}
++
++static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold);
++
++static ssize_t show_duration(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%d\n", __duration_to_ms(lis,
++ __ms_to_duration(lis, lis->duration)));
++}
++
++static ssize_t set_duration(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ unsigned int val;
++
++ if (sscanf(buf, "%u\n", &val) != 1)
++ return -EINVAL;
++ if (val > 2550)
++ return -ERANGE;
++
++ lis->duration = val;
++ if (lis->flags & LIS302DL_F_INPUT_OPEN)
++ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
++ __ms_to_duration(lis, lis->duration));
++
++ return count;
++}
++
++static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration);
++
++static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ int n = 0;
++ u8 reg[0x40];
++ char *end = buf;
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ for (n = 0; n < sizeof(reg); n++)
++ reg[n] = __reg_read(lis, n);
++
++ local_irq_restore(flags);
++
++ for (n = 0; n < sizeof(reg); n += 16) {
++ hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
++ end += strlen(end);
++ *end++ = '\n';
++ *end++ = '\0';
++ }
++
++ return end - buf;
++}
++static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
++
++/* Configure freefall/wakeup interrupts */
++static ssize_t set_wakeup_threshold(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ unsigned int threshold;
++
++ if (sscanf(buf, "%u\n", &threshold) != 1)
++ return -EINVAL;
++
++ if (threshold > 8000)
++ return -ERANGE;
++
++ /* Zero turns the feature off */
++ if (threshold == 0) {
++ if (lis->flags & LIS302DL_F_IRQ_WAKE) {
++ disable_irq_wake(lis->pdata->interrupt);
++ lis->flags &= ~LIS302DL_F_IRQ_WAKE;
++ }
++
++ return count;
++ }
++
++ lis->wakeup.threshold = threshold;
++
++ if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) {
++ enable_irq_wake(lis->pdata->interrupt);
++ lis->flags |= LIS302DL_F_IRQ_WAKE;
++ }
++
++ return count;
++}
++
++static ssize_t show_wakeup_threshold(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++ /* All events off? */
++ if (lis->wakeup.threshold == 0)
++ return sprintf(buf, "off\n");
++
++ return sprintf(buf, "%u\n", lis->wakeup.threshold);
++}
++
++static DEVICE_ATTR(wakeup_threshold, S_IRUGO | S_IWUSR, show_wakeup_threshold,
++ set_wakeup_threshold);
++
++static ssize_t set_wakeup_duration(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++ unsigned int duration;
++
++ if (sscanf(buf, "%u\n", &duration) != 1)
++ return -EINVAL;
++
++ if (duration > 2550)
++ return -ERANGE;
++
++ lis->wakeup.duration = duration;
++
++ return count;
++}
++
++static ssize_t show_wakeup_duration(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(dev);
++
++ return sprintf(buf, "%u\n", lis->wakeup.duration);
++}
++
++static DEVICE_ATTR(wakeup_duration, S_IRUGO | S_IWUSR, show_wakeup_duration,
++ set_wakeup_duration);
++
++static struct attribute *lis302dl_sysfs_entries[] = {
++ &dev_attr_sample_rate.attr,
++ &dev_attr_full_scale.attr,
++ &dev_attr_threshold.attr,
++ &dev_attr_duration.attr,
++ &dev_attr_dump.attr,
++ &dev_attr_wakeup_threshold.attr,
++ &dev_attr_wakeup_duration.attr,
++ &dev_attr_overruns.attr,
++ NULL
++};
++
++static struct attribute_group lis302dl_attr_group = {
++ .name = NULL,
++ .attrs = lis302dl_sysfs_entries,
++};
++
++/* input device handling and driver core interaction */
++
++static int lis302dl_input_open(struct input_dev *inp)
++{
++ struct lis302dl_info *lis = input_get_drvdata(inp);
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ __enable_data_collection(lis);
++ lis->flags |= LIS302DL_F_INPUT_OPEN;
++
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static void lis302dl_input_close(struct input_dev *inp)
++{
++ struct lis302dl_info *lis = input_get_drvdata(inp);
++ u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen |
++ LIS302DL_CTRL1_Zen;
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ /* since the input core already serializes access and makes sure we
++ * only see close() for the close of the last user, we can safely
++ * disable the data ready events */
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
++ lis->flags &= ~LIS302DL_F_INPUT_OPEN;
++
++ /* however, don't power down the whole device if still needed */
++ if (!(lis->flags & LIS302DL_F_WUP_FF ||
++ lis->flags & LIS302DL_F_WUP_CLICK)) {
++ __reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
++ 0x00);
++ }
++ local_irq_restore(flags);
++}
++
++/* get the device to reload its coefficients from EEPROM and wait for it
++ * to complete
++ */
++
++static int __lis302dl_reset_device(struct lis302dl_info *lis)
++{
++ int timeout = 10;
++
++ __reg_write(lis, LIS302DL_REG_CTRL2,
++ LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
++
++ while ((__reg_read(lis, LIS302DL_REG_CTRL2)
++ & LIS302DL_CTRL2_BOOT) && (timeout--))
++ mdelay(1);
++
++ return !!(timeout < 0);
++}
++
++static int __devinit lis302dl_probe(struct spi_device *spi)
++{
++ int rc;
++ struct lis302dl_info *lis;
++ u_int8_t wai;
++ unsigned long flags;
++ struct lis302dl_platform_data *pdata = spi->dev.platform_data;
++
++ spi->mode = SPI_MODE_3;
++ rc = spi_setup(spi);
++ if (rc < 0) {
++ dev_err(&spi->dev, "spi_setup failed\n");
++ return rc;
++ }
++
++ lis = kzalloc(sizeof(*lis), GFP_KERNEL);
++ if (!lis)
++ return -ENOMEM;
++
++ lis->dev = &spi->dev;
++ lis->spi = spi;
++
++ dev_set_drvdata(lis->dev, lis);
++
++ lis->pdata = pdata;
++
++ rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
++ if (rc) {
++ dev_err(lis->dev, "error creating sysfs group\n");
++ goto bail_free_lis;
++ }
++
++ /* initialize input layer details */
++ lis->input_dev = input_allocate_device();
++ if (!lis->input_dev) {
++ dev_err(lis->dev, "Unable to allocate input device\n");
++ goto bail_sysfs;
++ }
++
++ input_set_drvdata(lis->input_dev, lis);
++ lis->input_dev->name = pdata->name;
++ /* SPI Bus not defined as a valid bus for input subsystem*/
++ lis->input_dev->id.bustype = BUS_I2C; /* lie about it */
++ lis->input_dev->open = lis302dl_input_open;
++ lis->input_dev->close = lis302dl_input_close;
++
++ rc = input_register_device(lis->input_dev);
++ if (rc) {
++ dev_err(lis->dev, "error %d registering input device\n", rc);
++ goto bail_inp_dev;
++ }
++
++ local_irq_save(flags);
++ /* Configure our IO */
++ (lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++ wai = __reg_read(lis, LIS302DL_REG_WHO_AM_I);
++ if (wai != LIS302DL_WHO_AM_I_MAGIC) {
++ dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
++ dev_set_drvdata(lis->dev, NULL);
++ rc = -ENODEV;
++ local_irq_restore(flags);
++ goto bail_inp_reg;
++ }
++
++ set_bit(EV_ABS, lis->input_dev->evbit);
++ input_set_abs_params(lis->input_dev, ABS_X, 0, 0, 0, 0);
++ input_set_abs_params(lis->input_dev, ABS_Y, 0, 0, 0, 0);
++ input_set_abs_params(lis->input_dev, ABS_Z, 0, 0, 0, 0);
++
++
++ lis->threshold = 0;
++ lis->duration = 0;
++ memset(&lis->wakeup, 0, sizeof(lis->wakeup));
++
++ if (__lis302dl_reset_device(lis))
++ dev_err(lis->dev, "device BOOT reload failed\n");
++
++ /* force us powered */
++ __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
++ LIS302DL_CTRL1_Xen |
++ LIS302DL_CTRL1_Yen |
++ LIS302DL_CTRL1_Zen);
++ mdelay(1);
++
++ __reg_write(lis, LIS302DL_REG_CTRL2, 0);
++ __reg_write(lis, LIS302DL_REG_CTRL3,
++ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
++ __reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
++ __reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
++ __reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
++
++ /* start off in powered down mode; we power up when someone opens us */
++ __reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
++ LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen);
++
++ if (pdata->open_drain)
++ /* switch interrupt to open collector, active-low */
++ __reg_write(lis, LIS302DL_REG_CTRL3,
++ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
++ else
++ /* push-pull, active-low */
++ __reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
++
++ __lis302dl_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND);
++ __lis302dl_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND);
++
++ __reg_read(lis, LIS302DL_REG_STATUS);
++ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
++ __reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
++ __reg_read(lis, LIS302DL_REG_CLICK_SRC);
++ local_irq_restore(flags);
++
++ dev_info(lis->dev, "Found %s\n", pdata->name);
++
++ lis->pdata = pdata;
++
++ set_irq_handler(lis->pdata->interrupt, handle_level_irq);
++
++ rc = request_irq(lis->pdata->interrupt, lis302dl_interrupt,
++ IRQF_TRIGGER_LOW, "lis302dl", lis);
++
++ if (rc < 0) {
++ dev_err(lis->dev, "error requesting IRQ %d\n",
++ lis->pdata->interrupt);
++ goto bail_inp_reg;
++ }
++ return 0;
++
++bail_inp_reg:
++ input_unregister_device(lis->input_dev);
++bail_inp_dev:
++ input_free_device(lis->input_dev);
++bail_sysfs:
++ sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
++bail_free_lis:
++ kfree(lis);
++ return rc;
++}
++
++static int __devexit lis302dl_remove(struct spi_device *spi)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
++ unsigned long flags;
++
++ /* Disable interrupts */
++ if (lis->flags & LIS302DL_F_IRQ_WAKE)
++ disable_irq_wake(lis->pdata->interrupt);
++ free_irq(lis->pdata->interrupt, lis);
++
++ /* Reset and power down the device */
++ local_irq_save(flags);
++ __reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
++ __reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
++ __reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
++ local_irq_restore(flags);
++
++ /* Cleanup resources */
++ sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
++ input_unregister_device(lis->input_dev);
++ if (lis->input_dev)
++ input_free_device(lis->input_dev);
++ dev_set_drvdata(lis->dev, NULL);
++ kfree(lis);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static u8 regs_to_save[] = {
++ LIS302DL_REG_CTRL2,
++ LIS302DL_REG_CTRL3,
++ LIS302DL_REG_FF_WU_CFG_1,
++ LIS302DL_REG_FF_WU_THS_1,
++ LIS302DL_REG_FF_WU_DURATION_1,
++ LIS302DL_REG_FF_WU_CFG_2,
++ LIS302DL_REG_FF_WU_THS_2,
++ LIS302DL_REG_FF_WU_DURATION_2,
++ LIS302DL_REG_CLICK_CFG,
++ LIS302DL_REG_CLICK_THSY_X,
++ LIS302DL_REG_CLICK_THSZ,
++ LIS302DL_REG_CLICK_TIME_LIMIT,
++ LIS302DL_REG_CLICK_LATENCY,
++ LIS302DL_REG_CLICK_WINDOW,
++ LIS302DL_REG_CTRL1,
++};
++
++static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
++ unsigned long flags;
++ u_int8_t tmp;
++ int n;
++
++ /* determine if we want to wake up from the accel. */
++ if (lis->flags & LIS302DL_F_WUP_CLICK)
++ return 0;
++
++ disable_irq(lis->pdata->interrupt);
++ local_irq_save(flags);
++
++ /*
++ * When we share SPI over multiple sensors, there is a race here
++ * that one or more sensors will lose. In that case, the shared
++ * SPI bus GPIO will be in sleep mode and partially pulled down. So
++ * we explicitly put our IO into "wake" mode here before the final
++ * traffic to the sensor.
++ */
++ (lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++ /* save registers */
++ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
++ lis->regs[regs_to_save[n]] =
++ __reg_read(lis, regs_to_save[n]);
++
++ /* power down or enable wakeup */
++
++ if (lis->wakeup.threshold == 0) {
++ tmp = __reg_read(lis, LIS302DL_REG_CTRL1);
++ tmp &= ~LIS302DL_CTRL1_PD;
++ __reg_write(lis, LIS302DL_REG_CTRL1, tmp);
++ } else
++ __enable_wakeup(lis);
++
++ /* place our IO to the device in sleep-compatible states */
++ (lis->pdata->lis302dl_suspend_io)(lis, 0);
++
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static int lis302dl_resume(struct spi_device *spi)
++{
++ struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
++ unsigned long flags;
++ int n;
++
++ if (lis->flags & LIS302DL_F_WUP_CLICK)
++ return 0;
++
++ local_irq_save(flags);
++
++ /* get our IO to the device back in operational states */
++ (lis->pdata->lis302dl_suspend_io)(lis, 1);
++
++ /* resume from powerdown first! */
++ __reg_write(lis, LIS302DL_REG_CTRL1,
++ LIS302DL_CTRL1_PD |
++ LIS302DL_CTRL1_Xen |
++ LIS302DL_CTRL1_Yen |
++ LIS302DL_CTRL1_Zen);
++ mdelay(1);
++
++ if (__lis302dl_reset_device(lis))
++ dev_err(&spi->dev, "device BOOT reload failed\n");
++
++ /* restore registers after resume */
++ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
++ __reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]);
++
++ /* if someone had us open, reset the non-wake threshold stuff */
++ if (lis->flags & LIS302DL_F_INPUT_OPEN)
++ __enable_data_collection(lis);
++
++ local_irq_restore(flags);
++ enable_irq(lis->pdata->interrupt);
++
++ return 0;
++}
++#else
++#define lis302dl_suspend NULL
++#define lis302dl_resume NULL
++#endif
++
++static struct spi_driver lis302dl_spi_driver = {
++ .driver = {
++ .name = "lis302dl",
++ .owner = THIS_MODULE,
++ },
++
++ .probe = lis302dl_probe,
++ .remove = __devexit_p(lis302dl_remove),
++ .suspend = lis302dl_suspend,
++ .resume = lis302dl_resume,
++};
++
++static int __devinit lis302dl_init(void)
++{
++ return spi_register_driver(&lis302dl_spi_driver);
++}
++
++static void __exit lis302dl_exit(void)
++{
++ spi_unregister_driver(&lis302dl_spi_driver);
++}
++
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
++
++module_init(lis302dl_init);
++module_exit(lis302dl_exit);
+diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
+index f1db395..5c50329 100644
+--- a/drivers/spi/spi_bitbang.c
++++ b/drivers/spi/spi_bitbang.c
+@@ -253,134 +253,139 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+ * Drivers can provide word-at-a-time i/o primitives, or provide
+ * transfer-at-a-time ones to leverage dma or fifo hardware.
+ */
+-static void bitbang_work(struct work_struct *work)
++/* Synchronous non blocking transfer */
++int
++spi_bitbang_transfer_sync(struct spi_device *spi, struct spi_message *m)
+ {
+- struct spi_bitbang *bitbang =
+- container_of(work, struct spi_bitbang, work);
+- unsigned long flags;
+- int do_setup = -1;
+- int (*setup_transfer)(struct spi_device *,
+- struct spi_transfer *);
++ struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
++ struct spi_transfer *t;
++ unsigned long flags;
++ int cs_change = 1;
++ int status;
++ int nsecs;
++ int (*setup_transfer)(struct spi_device *, struct spi_transfer *);
++
++ /* FIXME this is made-up ... the correct value is known to
++ * word-at-a-time bitbang code, and presumably chipselect()
++ * should enforce these requirements too?
++ */
++ nsecs = 100;
++ cs_change = 1;
++ status = 0;
++ setup_transfer = NULL;
++
++ local_irq_save(flags);
++ list_for_each_entry (t, &m->transfers, transfer_list) {
++ /* override or restore speed and wordsize */
++ if (t->speed_hz || t->bits_per_word) {
++ setup_transfer = bitbang->setup_transfer;
++ if (!setup_transfer) {
++ status = -ENOPROTOOPT;
++ break;
++ }
++ }
++ if (setup_transfer) {
++ status = setup_transfer(spi, t);
++ if (status < 0)
++ break;
++ }
+
+- setup_transfer = bitbang->setup_transfer;
++ /* set up default clock polarity, and activate chip;
++ * this implicitly updates clock and spi modes as
++ * previously recorded for this device via setup().
++ * (and also deselects any other chip that might be
++ * selected ...)
++ */
+
+- spin_lock_irqsave(&bitbang->lock, flags);
+- bitbang->busy = 1;
+- while (!list_empty(&bitbang->queue)) {
+- struct spi_message *m;
+- struct spi_device *spi;
+- unsigned nsecs;
+- struct spi_transfer *t = NULL;
+- unsigned tmp;
+- unsigned cs_change;
+- int status;
++ if (cs_change) {
++ bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
++ ndelay(nsecs);
++ }
+
+- m = container_of(bitbang->queue.next, struct spi_message,
+- queue);
+- list_del_init(&m->queue);
+- spin_unlock_irqrestore(&bitbang->lock, flags);
++ cs_change = t->cs_change;
++ if (!t->tx_buf && !t->rx_buf && t->len) {
++ status = -EINVAL;
++ break;
++ }
+
+- /* FIXME this is made-up ... the correct value is known to
+- * word-at-a-time bitbang code, and presumably chipselect()
+- * should enforce these requirements too?
++ /* transfer data. the lower level code handles any
++ * new dma mappings it needs. our caller always gave
++ * us dma-safe buffers.
+ */
+- nsecs = 100;
++ if (t->len) {
++ /* REVISIT dma API still needs a designated
++ * DMA_ADDR_INVALID; ~0 might be better.
++ */
++ if (!m->is_dma_mapped)
++ t->rx_dma = t->tx_dma = 0;
++ status = bitbang->txrx_bufs(spi, t);
++ }
+
+- spi = m->spi;
+- tmp = 0;
+- cs_change = 1;
++ if (status > 0)
++ m->actual_length += status;
++ if (status != t->len) {
++ /* always report some kind of error */
++ if (status >= 0)
++ status = -EREMOTEIO;
++ break;
++ }
+ status = 0;
++ /* protocol tweaks before next transfer */
++ if (t->delay_usecs)
++ udelay(t->delay_usecs);
++ if (!cs_change)
++ continue;
++ if (t->transfer_list.next == &m->transfers)
++ break;
++ /* sometimes a short mid-message deselect of the chip
++ * may be needed to terminate a mode or command
++ */
++ ndelay(nsecs);
++ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
++ ndelay(nsecs);
++ }
+
+- list_for_each_entry (t, &m->transfers, transfer_list) {
+-
+- /* override speed or wordsize? */
+- if (t->speed_hz || t->bits_per_word)
+- do_setup = 1;
+-
+- /* init (-1) or override (1) transfer params */
+- if (do_setup != 0) {
+- if (!setup_transfer) {
+- status = -ENOPROTOOPT;
+- break;
+- }
+- status = setup_transfer(spi, t);
+- if (status < 0)
+- break;
+- }
++ m->status = status;
++ if (m->complete)
++ m->complete(m->context);
+
+- /* set up default clock polarity, and activate chip;
+- * this implicitly updates clock and spi modes as
+- * previously recorded for this device via setup().
+- * (and also deselects any other chip that might be
+- * selected ...)
+- */
+- if (cs_change) {
+- bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
+- ndelay(nsecs);
+- }
+- cs_change = t->cs_change;
+- if (!t->tx_buf && !t->rx_buf && t->len) {
+- status = -EINVAL;
+- break;
+- }
++ /* restore speed and wordsize */
++ if (setup_transfer)
++ setup_transfer(spi, NULL);
+
+- /* transfer data. the lower level code handles any
+- * new dma mappings it needs. our caller always gave
+- * us dma-safe buffers.
+- */
+- if (t->len) {
+- /* REVISIT dma API still needs a designated
+- * DMA_ADDR_INVALID; ~0 might be better.
+- */
+- if (!m->is_dma_mapped)
+- t->rx_dma = t->tx_dma = 0;
+- status = bitbang->txrx_bufs(spi, t);
+- }
+- if (status > 0)
+- m->actual_length += status;
+- if (status != t->len) {
+- /* always report some kind of error */
+- if (status >= 0)
+- status = -EREMOTEIO;
+- break;
+- }
+- status = 0;
+-
+- /* protocol tweaks before next transfer */
+- if (t->delay_usecs)
+- udelay(t->delay_usecs);
++ /* normally deactivate chipselect ... unless no error and
++ * cs_change has hinted that the next message will probably
++ * be for this chip too.
++ */
++ if (!(status == 0 && cs_change)) {
++ ndelay(nsecs);
++ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
++ ndelay(nsecs);
++ }
+
+- if (!cs_change)
+- continue;
+- if (t->transfer_list.next == &m->transfers)
+- break;
++ local_irq_restore(flags);
+
+- /* sometimes a short mid-message deselect of the chip
+- * may be needed to terminate a mode or command
+- */
+- ndelay(nsecs);
+- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+- ndelay(nsecs);
+- }
++ return status;
++}
++EXPORT_SYMBOL_GPL(spi_bitbang_transfer_sync);
+
+- m->status = status;
+- m->complete(m->context);
++static void bitbang_work(struct work_struct *work)
++{
++ struct spi_bitbang *bitbang =
++ container_of(work, struct spi_bitbang, work);
++ unsigned long flags;
+
+- /* restore speed and wordsize if it was overridden */
+- if (do_setup == 1)
+- setup_transfer(spi, NULL);
+- do_setup = 0;
++ spin_lock_irqsave(&bitbang->lock, flags);
++ bitbang->busy = 1;
++ while (!list_empty(&bitbang->queue)) {
++ struct spi_message *m;
+
+- /* normally deactivate chipselect ... unless no error and
+- * cs_change has hinted that the next message will probably
+- * be for this chip too.
+- */
+- if (!(status == 0 && cs_change)) {
+- ndelay(nsecs);
+- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+- ndelay(nsecs);
+- }
++ m = container_of(bitbang->queue.next, struct spi_message,
++ queue);
++ list_del_init(&m->queue);
+
++ spin_unlock_irqrestore(&bitbang->lock, flags);
++ spi_bitbang_transfer_sync(m->spi, m);
+ spin_lock_irqsave(&bitbang->lock, flags);
+ }
+ bitbang->busy = 0;
+@@ -455,6 +460,10 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
+
+ if (!bitbang->master->transfer)
+ bitbang->master->transfer = spi_bitbang_transfer;
++
++ if (!bitbang->master->transfer_sync && bitbang->non_blocking_transfer)
++ bitbang->master->transfer_sync = spi_bitbang_transfer_sync;
++
+ if (!bitbang->txrx_bufs) {
+ bitbang->use_dma = 0;
+ bitbang->txrx_bufs = spi_bitbang_bufs;
+diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
+index bbf9371..5685b78 100644
+--- a/drivers/spi/spi_s3c24xx_gpio.c
++++ b/drivers/spi/spi_s3c24xx_gpio.c
+@@ -92,7 +92,7 @@ static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+ if (sg->info && sg->info->chip_select)
+- (sg->info->chip_select)(sg->info, value);
++ (sg->info->chip_select)(sg->info, dev->chip_select, value);
+ }
+
+ static int s3c2410_spigpio_probe(struct platform_device *dev)
+@@ -113,14 +113,17 @@ static int s3c2410_spigpio_probe(struct platform_device *dev)
+
+ platform_set_drvdata(dev, sp);
+
+- /* copy in the plkatform data */
++ /* copy in the platform data */
+ info = sp->info = dev->dev.platform_data;
+
++ master->num_chipselect = info->num_chipselect;
++
+ /* setup spi bitbang adaptor */
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master->bus_num = info->bus_num;
+ sp->bitbang.master->num_chipselect = info->num_chipselect;
+ sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
++ sp->bitbang.non_blocking_transfer = info->non_blocking_transfer;
+
+ sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+ sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+diff --git a/include/linux/lis302dl.h b/include/linux/lis302dl.h
+new file mode 100644
+index 0000000..0c1fc30
+--- /dev/null
++++ b/include/linux/lis302dl.h
+@@ -0,0 +1,152 @@
++#ifndef _LINUX_LIS302DL_H
++#define _LINUX_LIS302DL_H
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++#include <linux/input.h>
++#include <linux/workqueue.h>
++
++struct lis302dl_info;
++
++struct lis302dl_platform_data {
++ char *name;
++ unsigned long pin_chip_select;
++ unsigned long pin_clk;
++ unsigned long pin_mosi;
++ unsigned long pin_miso;
++ int open_drain;
++ int interrupt;
++ void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
++};
++
++struct lis302dl_info {
++ struct lis302dl_platform_data *pdata;
++ struct device *dev;
++ struct input_dev *input_dev;
++ unsigned int flags;
++ unsigned int threshold;
++ unsigned int duration;
++ u32 overruns;
++ struct {
++ unsigned int threshold; /* mg */
++ unsigned int duration; /* ms */
++ } wakeup;
++
++ struct spi_device *spi;
++ u_int8_t regs[0x40];
++};
++
++enum lis302dl_reg {
++ LIS302DL_REG_WHO_AM_I = 0x0f,
++ LIS302DL_REG_CTRL1 = 0x20,
++ LIS302DL_REG_CTRL2 = 0x21,
++ LIS302DL_REG_CTRL3 = 0x22,
++ LIS302DL_REG_HP_FILTER_RESET = 0x23,
++ LIS302DL_REG_STATUS = 0x27,
++ LIS302DL_REG_OUT_X = 0x29,
++ LIS302DL_REG_OUT_Y = 0x2b,
++ LIS302DL_REG_OUT_Z = 0x2d,
++ LIS302DL_REG_FF_WU_CFG_1 = 0x30,
++ LIS302DL_REG_FF_WU_SRC_1 = 0x31,
++ LIS302DL_REG_FF_WU_THS_1 = 0x32,
++ LIS302DL_REG_FF_WU_DURATION_1 = 0x33,
++ LIS302DL_REG_FF_WU_CFG_2 = 0x34,
++ LIS302DL_REG_FF_WU_SRC_2 = 0x35,
++ LIS302DL_REG_FF_WU_THS_2 = 0x36,
++ LIS302DL_REG_FF_WU_DURATION_2 = 0x37,
++ LIS302DL_REG_CLICK_CFG = 0x38,
++ LIS302DL_REG_CLICK_SRC = 0x39,
++ LIS302DL_REG_CLICK_THSY_X = 0x3b,
++ LIS302DL_REG_CLICK_THSZ = 0x3c,
++ LIS302DL_REG_CLICK_TIME_LIMIT = 0x3d,
++ LIS302DL_REG_CLICK_LATENCY = 0x3e,
++ LIS302DL_REG_CLICK_WINDOW = 0x3f,
++};
++
++enum lis302dl_reg_ctrl1 {
++ LIS302DL_CTRL1_Xen = 0x01,
++ LIS302DL_CTRL1_Yen = 0x02,
++ LIS302DL_CTRL1_Zen = 0x04,
++ LIS302DL_CTRL1_STM = 0x08,
++ LIS302DL_CTRL1_STP = 0x10,
++ LIS302DL_CTRL1_FS = 0x20,
++ LIS302DL_CTRL1_PD = 0x40,
++ LIS302DL_CTRL1_DR = 0x80,
++};
++
++enum lis302dl_reg_ctrl2 {
++ LIS302DL_CTRL2_HPC1 = 0x01,
++ LIS302DL_CTRL2_HPC2 = 0x02,
++ LIS302DL_CTRL2_HPFF1 = 0x04,
++ LIS302DL_CTRL2_HPFF2 = 0x08,
++ LIS302DL_CTRL2_FDS = 0x10,
++ LIS302DL_CTRL2_BOOT = 0x40,
++ LIS302DL_CTRL2_SIM = 0x80,
++};
++enum lis302dl_reg_ctrl3 {
++ LIS302DL_CTRL3_PP_OD = 0x40,
++ LIS302DL_CTRL3_IHL = 0x80,
++};
++
++enum lis302dl_reg_status {
++ LIS302DL_STATUS_XDA = 0x01,
++ LIS302DL_STATUS_YDA = 0x02,
++ LIS302DL_STATUS_ZDA = 0x04,
++ LIS302DL_STATUS_XYZDA = 0x08,
++ LIS302DL_STATUS_XOR = 0x10,
++ LIS302DL_STATUS_YOR = 0x20,
++ LIS302DL_STATUS_ZOR = 0x40,
++ LIS302DL_STATUS_XYZOR = 0x80,
++};
++
++/* Wakeup/freefall interrupt defs */
++enum lis302dl_reg_ffwucfg {
++ LIS302DL_FFWUCFG_XLIE = 0x01,
++ LIS302DL_FFWUCFG_XHIE = 0x02,
++ LIS302DL_FFWUCFG_YLIE = 0x04,
++ LIS302DL_FFWUCFG_YHIE = 0x08,
++ LIS302DL_FFWUCFG_ZLIE = 0x10,
++ LIS302DL_FFWUCFG_ZHIE = 0x20,
++ LIS302DL_FFWUCFG_LIR = 0x40,
++ LIS302DL_FFWUCFG_AOI = 0x80,
++};
++
++enum lis302dl_reg_ffwuths {
++ LIS302DL_FFWUTHS_DCRM = 0x80,
++};
++
++enum lis302dl_reg_ffwusrc {
++ LIS302DL_FFWUSRC_XL = 0x01,
++ LIS302DL_FFWUSRC_XH = 0x02,
++ LIS302DL_FFWUSRC_YL = 0x04,
++ LIS302DL_FFWUSRC_YH = 0x08,
++ LIS302DL_FFWUSRC_ZL = 0x10,
++ LIS302DL_FFWUSRC_ZH = 0x20,
++ LIS302DL_FFWUSRC_IA = 0x40,
++};
++
++enum lis302dl_reg_cloik_src {
++ LIS302DL_CLICKSRC_SINGLE_X = 0x01,
++ LIS302DL_CLICKSRC_DOUBLE_X = 0x02,
++ LIS302DL_CLICKSRC_SINGLE_Y = 0x04,
++ LIS302DL_CLICKSRC_DOUBLE_Y = 0x08,
++ LIS302DL_CLICKSRC_SINGLE_Z = 0x10,
++ LIS302DL_CLICKSRC_DOUBLE_Z = 0x20,
++ LIS302DL_CLICKSRC_IA = 0x40,
++};
++
++#define LIS302DL_WHO_AM_I_MAGIC 0x3b
++
++#define LIS302DL_F_WUP_FF_1 0x0001 /* wake up from free fall */
++#define LIS302DL_F_WUP_FF_2 0x0002
++#define LIS302DL_F_WUP_FF 0x0003
++#define LIS302DL_F_WUP_CLICK 0x0004
++#define LIS302DL_F_POWER 0x0010
++#define LIS302DL_F_FS 0x0020 /* ADC full scale */
++#define LIS302DL_F_INPUT_OPEN 0x0040 /* Set if input device is opened */
++#define LIS302DL_F_IRQ_WAKE 0x0080 /* IRQ is setup in wake mode */
++#define LIS302DL_F_DR 0x0100 /* Data rate, 400Hz/100Hz */
++
++
++#endif /* _LINUX_LIS302DL_H */
++
+diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
+index 97b60b3..9c5484b 100644
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -291,6 +291,13 @@ struct spi_master {
+ int (*transfer)(struct spi_device *spi,
+ struct spi_message *mesg);
+
++ /*
++ * Synchronous non blocking transfer function. Should guarantee
++ * data availability when it returns
++ */
++ int (*transfer_sync)(struct spi_device *spi,
++ struct spi_message *mesg);
++
+ /* called on release() to free memory provided by spi_master */
+ void (*cleanup)(struct spi_device *spi);
+ };
+@@ -542,6 +549,29 @@ static inline void spi_message_free(struct spi_message *m)
+ extern int spi_setup(struct spi_device *spi);
+ extern int spi_async(struct spi_device *spi, struct spi_message *message);
+
++/**
++ * spi_non_blocking_transfer - Synchronous, non blocking transfer
++ * @spi: device with which data will be exchanged
++ * @message: describes the data transfers with optional completion handlers
++ * Context: any (irqs may be blocked, etc)
++ *
++ * Data is guaranteed to be written or read when this function returns.
++ *
++ * Note : This may not be supported by all spi masters.
++ */
++
++static inline int
++spi_non_blocking_transfer(struct spi_device *spi, struct spi_message *message)
++{
++ if (unlikely(!spi->master->transfer_sync)) {
++ dev_err(&spi->master->dev,
++ "non-blocking transfers not supported\n");
++ return -EIO;
++ }
++
++ return spi->master->transfer_sync(spi, message);
++}
++
+ /*---------------------------------------------------------------------------*/
+
+ /* All these synchronous SPI transfer routines are utilities layered
+diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
+index eed4254..f92de01 100644
+--- a/include/linux/spi/spi_bitbang.h
++++ b/include/linux/spi/spi_bitbang.h
+@@ -31,6 +31,9 @@ struct spi_bitbang {
+ u8 use_dma;
+ u8 flags; /* extra spi->mode support */
+
++ /* Support for synchronous non blocking transfers */
++ int non_blocking_transfer;
++
+ struct spi_master *master;
+
+ /* setup_transfer() changes clock and/or wordsize to match settings
+@@ -62,6 +65,8 @@ extern void spi_bitbang_cleanup(struct spi_device *spi);
+ extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t);
++extern int spi_bitbang_transfer_sync(struct spi_device *spi,
++ struct spi_message *m);
+
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
+--
+1.7.0.4
+
--- /dev/null
+From d71534de6ab5e132d0798df30408042c229cbb62 Mon Sep 17 00:00:00 2001
+From: Radek Polak <psonek2@seznam.cz>
+Date: Fri, 9 Apr 2010 09:17:28 +0200
+Subject: [PATCH 18/22] usbhost.patch
+
+adds support for usb host mode and adds usb host pm sysfs node. I just copied
+and modified how modem is powered up and backported changes in ohci-s3c2410.c.
+No idea if this is the right approach, but it works - my usb keyboard is now
+working after:
+
+echo 1 > /sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/pcf50633-gpio/reg-
+fixed-voltage.2/gta02-pm-usbhost.0/power_on
+echo host > /sys/devices/platform/s3c2410-ohci/usb_mode
+
+Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
+---
+ arch/arm/mach-s3c2442/Makefile | 1 +
+ arch/arm/mach-s3c2442/mach-gta02.c | 50 ++++++++++++++++++++++++++++++++++-
+ drivers/usb/host/ohci-s3c2410.c | 48 ++++++++++++++++++++++++++++++++++
+ 3 files changed, 97 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
+index 6247ca0..3e7145c 100644
+--- a/arch/arm/mach-s3c2442/Makefile
++++ b/arch/arm/mach-s3c2442/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
+ gta02-pm-bt.o \
+ gta02-pm-gps.o \
+ gta02-pm-gsm.o \
++ gta02-pm-usbhost.o \
+ gta02-pm-wlan.o
+ # Machine support
+
+diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
+index 8e3cc91..f1d4d51 100644
+--- a/arch/arm/mach-s3c2442/mach-gta02.c
++++ b/arch/arm/mach-s3c2442/mach-gta02.c
+@@ -322,6 +322,10 @@ static struct platform_device gta02_pm_gsm_dev = {
+ .name = "gta02-pm-gsm",
+ };
+
++static struct platform_device gta02_pm_usbhost_dev = {
++ .name = "gta02-pm-usbhost",
++};
++
+ static struct platform_device gta02_pm_wlan_dev = {
+ .name = "gta02-pm-wlan",
+ };
+@@ -331,6 +335,11 @@ static struct regulator_consumer_supply gsm_supply_consumer = {
+ .supply = "GSM",
+ };
+
++static struct regulator_consumer_supply usbhost_supply_consumer = {
++ .dev = >a02_pm_usbhost_dev.dev,
++ .supply = "USBHOST",
++};
++
+ static struct regulator_init_data gsm_supply_init_data = {
+ .constraints = {
+ .min_uV = 3700000,
+@@ -342,6 +351,17 @@ static struct regulator_init_data gsm_supply_init_data = {
+ .consumer_supplies = &gsm_supply_consumer,
+ };
+
++static struct regulator_init_data usbhost_supply_init_data = {
++ .constraints = {
++ .min_uV = 3700000,
++ .max_uV = 3700000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
++ },
++ .num_consumer_supplies = 1,
++ .consumer_supplies = &usbhost_supply_consumer,
++};
++
+ static struct fixed_voltage_config gsm_supply_config = {
+ .supply_name = "GSM",
+ .microvolts = 3700000,
+@@ -350,6 +370,14 @@ static struct fixed_voltage_config gsm_supply_config = {
+ .init_data = &gsm_supply_init_data,
+ };
+
++static struct fixed_voltage_config usbhost_supply_config = {
++ .supply_name = "USBHOST",
++ .microvolts = 3700000,
++ .gpio = GTA02_GPIO_PCF(PCF50633_GPO),
++ .enable_high = 1,
++ .init_data = &usbhost_supply_init_data,
++};
++
+ static struct platform_device gta02_gsm_supply_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+@@ -358,6 +386,14 @@ static struct platform_device gta02_gsm_supply_device = {
+ },
+ };
+
++static struct platform_device gta02_usbhost_supply_device = {
++ .name = "reg-fixed-voltage",
++ .id = 2,
++ .dev = {
++ .platform_data = &usbhost_supply_config,
++ },
++};
++
+ static struct regulator_bulk_data gta02_gps_consumer_supply = {
+ .supply = "GPS",
+ };
+@@ -1332,12 +1368,17 @@ static struct platform_device* gta02_glamo_gpio_children[] = {
+
+ static struct platform_device* gta02_pcf50633_gpio_children[] = {
+ >a02_gsm_supply_device,
++ >a02_usbhost_supply_device,
+ };
+
+ static struct platform_device* gta02_gsm_supply_children[] = {
+ >a02_pm_gsm_dev,
+ };
+
++static struct platform_device* gta02_usbhost_supply_children[] = {
++ >a02_pm_usbhost_dev,
++};
++
+ static struct platform_device* gta02_hdq_children[] = {
+ &bq27000_battery_device,
+ };
+@@ -1364,14 +1405,19 @@ static struct gta02_device_children gta02_device_children[] = {
+ },
+ {
+ .dev_name = "pcf50633-gpio",
+- .num_children = 1,
++ .num_children = 2,
+ .children = gta02_pcf50633_gpio_children,
+ },
+ {
+ .dev_name = "reg-fixed-voltage.1",
+ .num_children = 1,
+ .children = gta02_gsm_supply_children,
+- }
++ },
++ {
++ .dev_name = "reg-fixed-voltage.2",
++ .num_children = 1,
++ .children = gta02_usbhost_supply_children,
++ },
+ };
+
+ static int gta02_add_child_devices(struct device *parent,
+diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
+index a68af2d..02bd7b0 100644
+--- a/drivers/usb/host/ohci-s3c2410.c
++++ b/drivers/usb/host/ohci-s3c2410.c
+@@ -22,6 +22,10 @@
+ #include <linux/platform_device.h>
+ #include <linux/clk.h>
+ #include <plat/usb-control.h>
++#include <mach/hardware.h>
++#include <mach/gpio-fns.h>
++#include <mach/regs-gpio.h>
++#include <mach/gta02.h>
+
+ #define valid_port(idx) ((idx) == 1 || (idx) == 2)
+
+@@ -306,6 +310,42 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+ local_irq_restore(flags);
+ }
+
++/* switching of USB pads */
++static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
++ return sprintf(buf, "host\n");
++
++ return sprintf(buf, "device\n");
++}
++
++static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ if (!strncmp(buf, "host", 4)) {
++ printk("s3c2410: changing usb to host\n");
++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
++ S3C2410_MISCCR_USBHOST);
++ /* FIXME:
++ * - call machine-specific disable-pullup function i
++ * - enable +Vbus (if hardware supports it)
++ */
++ s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
++ } else if (!strncmp(buf, "device", 6)) {
++ printk("s3c2410: changing usb to device\n");
++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
++ s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
++ } else {
++ printk("s3c2410: unknown mode\n");
++ return -EINVAL;
++ }
++
++ return count;
++}
++
++static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
++
+ /* may be called without controller electrically present */
+ /* may be called with controller, bus, and devices active */
+
+@@ -323,6 +363,7 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+ static void
+ usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+ {
++ device_remove_file(&dev->dev, &dev_attr_usb_mode);
+ usb_remove_hcd(hcd);
+ s3c2410_stop_hc(dev);
+ iounmap(hcd->regs);
+@@ -390,8 +431,15 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+ if (retval != 0)
+ goto err_ioremap;
+
++ retval = device_create_file(&dev->dev, &dev_attr_usb_mode);
++ if (retval != 0)
++ goto err_hcd;
++
+ return 0;
+
++ err_hcd:
++ usb_remove_hcd(hcd);
++
+ err_ioremap:
+ s3c2410_stop_hc(dev);
+ iounmap(hcd->regs);
+--
+1.7.0.4
+
--- /dev/null
+From cf93a0f8d2d61a2e13590c261dee4c4d74412db7 Mon Sep 17 00:00:00 2001
+From: Radek Polak <psonek2@seznam.cz>
+Date: Fri, 9 Apr 2010 09:18:02 +0200
+Subject: [PATCH 19/22] ar6000_delay.patch
+
+patch from https://docs.openmoko.org/trac/ticket/2327 - wifi is working good
+(100% until now) for me with this patch.
+
+Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
+---
+ arch/arm/mach-s3c2442/gta02-pm-usbhost.c | 174 ++++++++++++++++++++++++++++++
+ drivers/ar6000/hif/hif2.c | 2 +
+ 2 files changed, 176 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-s3c2442/gta02-pm-usbhost.c
+
+diff --git a/arch/arm/mach-s3c2442/gta02-pm-usbhost.c b/arch/arm/mach-s3c2442/gta02-pm-usbhost.c
+new file mode 100644
+index 0000000..233340a
+--- /dev/null
++++ b/arch/arm/mach-s3c2442/gta02-pm-usbhost.c
+@@ -0,0 +1,174 @@
++/*
++ * USBHOST Management code for the Openmoko Freerunner GSM Phone
++ *
++ * (C) 2007 by Openmoko Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/console.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/regulator/consumer.h>
++
++#include <mach/gpio.h>
++#include <asm/mach-types.h>
++
++#include <mach/hardware.h>
++
++#include <mach/gta02.h>
++#include <mach/regs-gpio.h>
++#include <mach/regs-gpioj.h>
++
++static struct regulator *gta02_usbhost_regulator;
++
++static ssize_t usbhost_read(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ if (!strcmp(attr->attr.name, "power_on")) {
++ if (regulator_is_enabled(gta02_usbhost_regulator))
++ goto out_1;
++ }
++
++ return strlcpy(buf, "0\n", 3);
++out_1:
++ return strlcpy(buf, "1\n", 3);
++}
++
++static void usbhost_on_off(struct device *dev, int on)
++{
++
++ on = !!on;
++
++ if (on == regulator_is_enabled(gta02_usbhost_regulator))
++ return;
++
++ if (!on) {
++ regulator_disable(gta02_usbhost_regulator);
++ return;
++ }
++
++ regulator_enable(gta02_usbhost_regulator);
++}
++
++static ssize_t usbhost_write(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ unsigned long on = simple_strtoul(buf, NULL, 10);
++
++ if (!strcmp(attr->attr.name, "power_on")) {
++ usbhost_on_off(dev, on);
++
++ return count;
++ }
++
++ return count;
++}
++
++static DEVICE_ATTR(power_on, 0644, usbhost_read, usbhost_write);
++
++#ifdef CONFIG_PM
++
++static int gta02_usbhost_suspend(struct device *dev)
++{
++ return 0;
++}
++
++static int gta02_usbhost_suspend_late(struct device *dev)
++{
++ return 0;
++}
++
++static int gta02_usbhost_resume(struct device *dev)
++{
++ return 0;
++}
++
++static struct dev_pm_ops gta02_usbhost_pm_ops = {
++ .suspend = gta02_usbhost_suspend,
++ .suspend_noirq = gta02_usbhost_suspend_late,
++ .resume = gta02_usbhost_resume,
++};
++
++#define GTA02_USBHOST_PM_OPS (>a02_usbhost_pm_ops)
++
++#else
++#define GTA02_USBHOST_PM_OPS NULL
++#endif /* CONFIG_PM */
++
++static struct attribute *gta02_usbhost_sysfs_entries[] = {
++ &dev_attr_power_on.attr,
++ NULL
++};
++
++static struct attribute_group gta02_usbhost_attr_group = {
++ .name = NULL,
++ .attrs = gta02_usbhost_sysfs_entries,
++};
++
++static int __init gta02_usbhost_probe(struct platform_device *pdev)
++{
++ int ret;
++
++ gta02_usbhost_regulator = regulator_get_exclusive(&pdev->dev, "USBHOST");
++
++ if (IS_ERR(gta02_usbhost_regulator)) {
++ ret = PTR_ERR(gta02_usbhost_regulator);
++ dev_err(&pdev->dev, "Failed to get regulator: %d\n", ret);
++ return ret;
++ }
++
++ ret = sysfs_create_group(&pdev->dev.kobj, >a02_usbhost_attr_group);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to create sysfs entries: %d\n", ret);
++ return ret;
++ }
++
++ return 0;
++}
++
++static int gta02_usbhost_remove(struct platform_device *pdev)
++{
++ usbhost_on_off(&pdev->dev, 0);
++
++ sysfs_remove_group(&pdev->dev.kobj, >a02_usbhost_attr_group);
++ regulator_put(gta02_usbhost_regulator);
++
++ return 0;
++}
++
++static struct platform_driver gta02_usbhost_driver = {
++ .probe = gta02_usbhost_probe,
++ .remove = gta02_usbhost_remove,
++ .driver = {
++ .name = "gta02-pm-usbhost",
++ .pm = GTA02_USBHOST_PM_OPS,
++ },
++};
++
++static int __devinit gta02_usbhost_init(void)
++{
++ return platform_driver_register(>a02_usbhost_driver);
++}
++module_init(gta02_usbhost_init);
++
++static void gta02_usbhost_exit(void)
++{
++ platform_driver_unregister(>a02_usbhost_driver);
++}
++module_exit(gta02_usbhost_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_DESCRIPTION("Openmoko Freerunner USBHOST Power Management");
+diff --git a/drivers/ar6000/hif/hif2.c b/drivers/ar6000/hif/hif2.c
+index 386d96e..90178d0 100644
+--- a/drivers/ar6000/hif/hif2.c
++++ b/drivers/ar6000/hif/hif2.c
+@@ -517,6 +517,8 @@ static int ar6000_do_activate(struct hif_device *hif)
+ goto out_func_ready;
+ }
+
++ mdelay (10);
++
+ ret = htcCallbacks.deviceInsertedHandler(hif);
+ if (ret == A_OK)
+ return 0;
+--
+1.7.0.4
+
--- /dev/null
+From a9d6c115089a0a34fbca89c539de50148a2cf34e Mon Sep 17 00:00:00 2001
+From: Radek Polak <psonek2@seznam.cz>
+Date: Fri, 9 Apr 2010 09:22:23 +0200
+Subject: [PATCH 20/22] save_regs.patch
+
+With this patch wifi can survive suspend.
+---
+ drivers/mmc/core/core.c | 3 +-
+ drivers/mmc/host/s3cmci.c | 46 +++++++++++++++++++++++++++++++++++++++++++-
+ drivers/mmc/host/s3cmci.h | 8 +++++++
+ include/linux/mmc/core.h | 2 +
+ 4 files changed, 56 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
+index 7dab2e5..7df08dd 100644
+--- a/drivers/mmc/core/core.c
++++ b/drivers/mmc/core/core.c
+@@ -59,10 +59,11 @@ static int mmc_schedule_delayed_work(struct delayed_work *work,
+ /*
+ * Internal function. Flush all scheduled work from the MMC work queue.
+ */
+-static void mmc_flush_scheduled_work(void)
++void mmc_flush_scheduled_work(void)
+ {
+ flush_workqueue(workqueue);
+ }
++EXPORT_SYMBOL_GPL(mmc_flush_scheduled_work);
+
+ /**
+ * mmc_request_done - finish processing an MMC request
+diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
+index fba147c..06423cb 100644
+--- a/drivers/mmc/host/s3cmci.c
++++ b/drivers/mmc/host/s3cmci.c
+@@ -1879,19 +1879,61 @@ MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
+
+ #ifdef CONFIG_PM
+
++static int save_regs(struct mmc_host *mmc)
++{
++ struct s3cmci_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ unsigned from;
++ u32 *to = host->saved;
++
++ mmc_flush_scheduled_work();
++
++ local_irq_save(flags);
++ for (from = S3C2410_SDICON; from != S3C2410_SDIIMSK+4; from += 4)
++ if (from != host->sdidata)
++ *to++ = readl(host->base + from);
++ BUG_ON(to-host->saved != ARRAY_SIZE(host->saved));
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static int restore_regs(struct mmc_host *mmc)
++{
++ struct s3cmci_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ unsigned to;
++ u32 *from = host->saved;
++
++ /*
++ * Before we begin with the necromancy, make sure we don't
++ * inadvertently start something we'll regret microseconds later.
++ */
++ from[S3C2410_SDICMDCON - S3C2410_SDICON] = 0;
++
++ local_irq_save(flags);
++ for (to = S3C2410_SDICON; to != S3C2410_SDIIMSK+4; to += 4)
++ if (to != host->sdidata)
++ writel(*from++, host->base + to);
++ BUG_ON(from-host->saved != ARRAY_SIZE(host->saved));
++ local_irq_restore(flags);
++
++ return 0;
++}
++
+ static int s3cmci_suspend(struct device *dev)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
+ struct pm_message event = { PM_EVENT_SUSPEND };
+
+- return mmc_suspend_host(mmc, event);
++ return save_regs(mmc);
+ }
+
+ static int s3cmci_resume(struct device *dev)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
+
+- return mmc_resume_host(mmc);
++ return restore_regs(mmc);
+ }
+
+ static struct dev_pm_ops s3cmci_pm = {
+diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
+index c76b53d..551e715 100644
+--- a/drivers/mmc/host/s3cmci.h
++++ b/drivers/mmc/host/s3cmci.h
+@@ -8,6 +8,8 @@
+ * published by the Free Software Foundation.
+ */
+
++#include <mach/regs-sdi.h>
++
+ enum s3cmci_waitfor {
+ COMPLETION_NONE,
+ COMPLETION_FINALIZE,
+@@ -27,6 +29,12 @@ struct s3cmci_host {
+ int irq;
+ int irq_cd;
+ int dma;
++ /*
++ * Here's where we save the registers during suspend. Note that we skip
++ * SDIDATA, which is at different positions on 2410 and 2440, so
++ * there's no "+1" in the array size.
++ */
++ u32 saved[(S3C2410_SDIIMSK-S3C2410_SDICON)/4];
+
+ unsigned long clk_rate;
+ unsigned long clk_div;
+diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
+index e4898e9..b49d674 100644
+--- a/include/linux/mmc/core.h
++++ b/include/linux/mmc/core.h
+@@ -129,6 +129,8 @@ struct mmc_request {
+ struct mmc_host;
+ struct mmc_card;
+
++extern void mmc_flush_scheduled_work(void);
++
+ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+--
+1.7.0.4
+
--- /dev/null
+From a081bd86a59ed4520551f490534ceece886d087e Mon Sep 17 00:00:00 2001
+From: Radek Polak <psonek2@seznam.cz>
+Date: Fri, 9 Apr 2010 09:24:43 +0200
+Subject: [PATCH 21/22] gta02_defconfig
+
+config used for qtmoko-v20. It has all freerunner hardware built in - so that
+you can boot and your phone hardware is working even without /lib/modules. I
+have (hopefully) all drivers from 2.6.29 as modules (usb keyboards etc).
+---
+ arch/arm/configs/gta02_defconfig | 2121 ++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 2121 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/configs/gta02_defconfig
+
+diff --git a/arch/arm/configs/gta02_defconfig b/arch/arm/configs/gta02_defconfig
+new file mode 100644
+index 0000000..73d26ba
+--- /dev/null
++++ b/arch/arm/configs/gta02_defconfig
+@@ -0,0 +1,2121 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.32
++# Wed Apr 7 23:27:29 2010
++#
++CONFIG_ARM=y
++CONFIG_HAVE_PWM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_NO_IOPORT=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPUFREQ=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_FIQ=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION="v20"
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TREE_RCU=y
++# CONFIG_TREE_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++CONFIG_RCU_FANOUT=32
++# CONFIG_RCU_FANOUT_EXACT is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=18
++# CONFIG_GROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
++# CONFIG_RELAY is not set
++CONFIG_NAMESPACES=y
++# CONFIG_UTS_NS is not set
++# CONFIG_IPC_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_NET_NS is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++
++#
++# Kernel Performance Events And Counters
++#
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++
++#
++# GCOV-based kernel profiling
++#
++CONFIG_SLOW_WORK=y
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++# CONFIG_LBDAF is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=m
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=m
++# CONFIG_DEFAULT_AS is not set
++CONFIG_DEFAULT_DEADLINE=y
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="deadline"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++CONFIG_ARCH_S3C2410=y
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5PC1XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_ARCH_BCMRING is not set
++CONFIG_PLAT_S3C24XX=y
++CONFIG_S3C2410_CLOCK=y
++CONFIG_CPU_S3C244X=y
++CONFIG_S3C24XX_PWM=y
++CONFIG_S3C24XX_GPIO_EXTRA=64
++CONFIG_S3C24XX_GPIO_EXTRA64=y
++CONFIG_S3C2410_DMA=y
++# CONFIG_S3C2410_DMA_DEBUG is not set
++CONFIG_S3C24XX_ADC=y
++CONFIG_PLAT_S3C=y
++CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
++CONFIG_CPU_LLSERIAL_S3C2440=y
++
++#
++# Boot options
++#
++# CONFIG_S3C_BOOT_WATCHDOG is not set
++# CONFIG_S3C_BOOT_ERROR_RESET is not set
++CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
++
++#
++# Power management
++#
++# CONFIG_S3C2410_PM_DEBUG is not set
++# CONFIG_S3C2410_PM_CHECK is not set
++CONFIG_S3C_LOWLEVEL_UART_PORT=2
++CONFIG_S3C_GPIO_SPACE=0
++CONFIG_S3C_DMA=y
++CONFIG_S3C_DEV_USB_HOST=y
++CONFIG_S3C_DEV_NAND=y
++
++#
++# S3C2400 Machines
++#
++CONFIG_CPU_S3C2410_DMA=y
++CONFIG_S3C2410_PM=y
++CONFIG_S3C2410_GPIO=y
++
++#
++# S3C2410 Machines
++#
++# CONFIG_ARCH_SMDK2410 is not set
++# CONFIG_ARCH_H1940 is not set
++# CONFIG_MACH_N30 is not set
++# CONFIG_ARCH_BAST is not set
++# CONFIG_MACH_OTOM is not set
++# CONFIG_MACH_AML_M5900 is not set
++# CONFIG_MACH_TCT_HAMMER is not set
++# CONFIG_MACH_VR1000 is not set
++# CONFIG_MACH_QT2410 is not set
++
++#
++# S3C2412 Machines
++#
++# CONFIG_MACH_JIVE is not set
++# CONFIG_MACH_SMDK2413 is not set
++# CONFIG_MACH_SMDK2412 is not set
++# CONFIG_MACH_VSTMS is not set
++
++#
++# S3C2440 Machines
++#
++# CONFIG_MACH_ANUBIS is not set
++# CONFIG_MACH_OSIRIS is not set
++# CONFIG_MACH_RX3715 is not set
++# CONFIG_ARCH_S3C2440 is not set
++# CONFIG_MACH_NEXCODER_2440 is not set
++# CONFIG_MACH_AT2440EVB is not set
++# CONFIG_MACH_MINI2440 is not set
++CONFIG_CPU_S3C2442=y
++
++#
++# S3C2442 Machines
++#
++CONFIG_MACH_NEO1973_GTA02=y
++
++#
++# S3C2443 Machines
++#
++# CONFIG_MACH_SMDK2443 is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM920T=y
++CONFIG_CPU_32v4T=y
++CONFIG_CPU_ABRT_EV4T=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_V4WT=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=200
++CONFIG_AEABI=y
++# CONFIG_OABI_COMPAT is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_HAVE_MLOCK=y
++CONFIG_HAVE_MLOCKED_PAGE_BIT=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="unused -- bootloader passes ATAG list"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPU_IDLE=y
++CONFIG_CPU_IDLE_GOV_LADDER=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++# CONFIG_APM_EMULATION is not set
++# CONFIG_PM_RUNTIME is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++CONFIG_XFRM_MIGRATE=y
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_NET_IPGRE_BROADCAST is not set
++CONFIG_IP_MROUTE=y
++# CONFIG_IP_PIMSM_V1 is not set
++# CONFIG_IP_PIMSM_V2 is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++CONFIG_TCP_CONG_ADVANCED=y
++# CONFIG_TCP_CONG_BIC is not set
++# CONFIG_TCP_CONG_CUBIC is not set
++CONFIG_TCP_CONG_WESTWOOD=y
++# CONFIG_TCP_CONG_HTCP is not set
++# CONFIG_TCP_CONG_HSTCP is not set
++# CONFIG_TCP_CONG_HYBLA is not set
++# CONFIG_TCP_CONG_VEGAS is not set
++# CONFIG_TCP_CONG_SCALABLE is not set
++# CONFIG_TCP_CONG_LP is not set
++# CONFIG_TCP_CONG_VENO is not set
++# CONFIG_TCP_CONG_YEAH is not set
++# CONFIG_TCP_CONG_ILLINOIS is not set
++# CONFIG_DEFAULT_BIC is not set
++# CONFIG_DEFAULT_CUBIC is not set
++# CONFIG_DEFAULT_HTCP is not set
++# CONFIG_DEFAULT_VEGAS is not set
++CONFIG_DEFAULT_WESTWOOD=y
++# CONFIG_DEFAULT_RENO is not set
++CONFIG_DEFAULT_TCP_CONG="westwood"
++CONFIG_TCP_MD5SIG=y
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++CONFIG_BRIDGE_NETFILTER=y
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_QUEUE=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++# CONFIG_NF_CONNTRACK_EVENTS is not set
++# CONFIG_NF_CT_PROTO_DCCP is not set
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
++# CONFIG_NF_CONNTRACK_AMANDA is not set
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++# CONFIG_NETFILTER_TPROXY is not set
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_HL=m
++# CONFIG_NETFILTER_XT_TARGET_LED is not set
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
++# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_HL=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
++# CONFIG_NETFILTER_XT_MATCH_OSF is not set
++# CONFIG_IP_VS is not set
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_PROTO_SCTP=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++# CONFIG_NF_NAT_AMANDA is not set
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++# CONFIG_IP_NF_ARPTABLES is not set
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++# CONFIG_IP6_NF_QUEUE is not set
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++# CONFIG_IP6_NF_RAW is not set
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++# CONFIG_BRIDGE_EBT_IP6 is not set
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_BRIDGE_EBT_ULOG=m
++# CONFIG_BRIDGE_EBT_NFLOG is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_STP=y
++CONFIG_BRIDGE=y
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=y
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++# CONFIG_NET_SCH_MULTIQ is not set
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++# CONFIG_NET_SCH_DRR is not set
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++# CONFIG_NET_CLS_FLOW is not set
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++# CONFIG_NET_CLS_IND is not set
++CONFIG_NET_SCH_FIFO=y
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++CONFIG_BT=y
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=y
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=y
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=y
++
++#
++# Bluetooth device drivers
++#
++CONFIG_BT_HCIBTUSB=y
++# CONFIG_BT_HCIBTSDIO is not set
++# CONFIG_BT_HCIUART is not set
++# CONFIG_BT_HCIBCM203X is not set
++# CONFIG_BT_HCIBPA10X is not set
++# CONFIG_BT_HCIBFUSB is not set
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_BT_MRVL is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_FIB_RULES=y
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++CONFIG_CFG80211_DEFAULT_PS_VALUE=0
++CONFIG_WIRELESS_OLD_REGULATORY=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_FIRMWARE_IN_KERNEL is not set
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=m
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++CONFIG_MTD_ROM=y
++CONFIG_MTD_ABSENT=y
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++# CONFIG_MTD_PHYSMAP_COMPAT is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++CONFIG_MTD_NAND_S3C2410=y
++# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
++CONFIG_MTD_NAND_S3C2410_HWECC=y
++# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_UB=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_SCAN_ASYNC=y
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++CONFIG_MII=m
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++CONFIG_KEYBOARD_STOWAWAY=m
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_FILTER=y
++CONFIG_TOUCHSCREEN_FILTER_GROUP=y
++CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y
++CONFIG_TOUCHSCREEN_FILTER_MEAN=y
++CONFIG_TOUCHSCREEN_FILTER_LINEAR=y
++CONFIG_TOUCHSCREEN_S3C2410=y
++# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
++# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_INPUT_ATI_REMOTE is not set
++# CONFIG_INPUT_ATI_REMOTE2 is not set
++# CONFIG_INPUT_KEYSPAN_REMOTE is not set
++# CONFIG_INPUT_POWERMATE is not set
++# CONFIG_INPUT_YEALINK is not set
++# CONFIG_INPUT_CM109 is not set
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_PCF50633_PMU=y
++# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
++CONFIG_INPUT_LIS302DL=y
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++# CONFIG_SERIO_SERPORT is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_DEVKMEM is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_SAMSUNG=y
++CONFIG_SERIAL_SAMSUNG_UARTS=3
++CONFIG_SERIAL_SAMSUNG_CONSOLE=y
++CONFIG_SERIAL_S3C2440=y
++# CONFIG_SERIAL_MAX3100 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++# CONFIG_I2C_COMPAT is not set
++CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_HELPER_AUTO is not set
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++CONFIG_I2C_S3C2410=y
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_GPIO=y
++CONFIG_SPI_S3C24XX=y
++CONFIG_SPI_S3C24XX_GPIO=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++CONFIG_GPIO_PCF50633=y
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++
++#
++# AC97 GPIO expanders:
++#
++# CONFIG_W1 is not set
++CONFIG_POWER_SUPPLY=y
++# CONFIG_POWER_SUPPLY_DEBUG is not set
++# CONFIG_PDA_POWER is not set
++# CONFIG_BATTERY_DS2760 is not set
++# CONFIG_BATTERY_DS2782 is not set
++# CONFIG_BATTERY_BQ27x00 is not set
++# CONFIG_BATTERY_MAX17040 is not set
++CONFIG_CHARGER_PCF50633=y
++CONFIG_BATTERY_BQ27000_HDQ=y
++CONFIG_HDQ_GPIO_BITBANG=y
++CONFIG_BATTERY_PLATFORM=y
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_S3C2410_WATCHDOG=y
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++CONFIG_MFD_CORE=y
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X is not set
++# CONFIG_MFD_WM8350_I2C is not set
++CONFIG_MFD_PCF50633=y
++# CONFIG_MFD_MC13783 is not set
++CONFIG_PCF50633_ADC=y
++# CONFIG_AB3100_CORE is not set
++# CONFIG_EZX_PCAP is not set
++CONFIG_MFD_GLAMO=y
++CONFIG_MFD_GLAMO_FB=y
++CONFIG_MFD_GLAMO_GPIO=y
++CONFIG_MFD_GLAMO_MCI=y
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++CONFIG_REGULATOR_FIXED_VOLTAGE=y
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++CONFIG_REGULATOR_USERSPACE_CONSUMER=y
++# CONFIG_REGULATOR_BQ24022 is not set
++# CONFIG_REGULATOR_MAX1586 is not set
++CONFIG_REGULATOR_PCF50633=y
++# CONFIG_REGULATOR_LP3971 is not set
++# CONFIG_REGULATOR_TPS65023 is not set
++# CONFIG_REGULATOR_TPS6507X is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_UVESA is not set
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_TMIO is not set
++# CONFIG_FB_S3C2410 is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++# CONFIG_LCD_LMS283GF05 is not set
++# CONFIG_LCD_LTV350QV is not set
++# CONFIG_LCD_ILI9320 is not set
++# CONFIG_LCD_TDO24M is not set
++# CONFIG_LCD_VGG2432A4 is not set
++# CONFIG_LCD_PLATFORM is not set
++CONFIG_LCD_JBT6K74=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++# CONFIG_BACKLIGHT_GENERIC is not set
++# CONFIG_BACKLIGHT_PWM is not set
++CONFIG_BACKLIGHT_PCF50633=y
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++CONFIG_FONTS=y
++# CONFIG_FONT_8x8 is not set
++# CONFIG_FONT_8x16 is not set
++CONFIG_FONT_6x11=y
++# CONFIG_FONT_7x14 is not set
++# CONFIG_FONT_PEARL_8x8 is not set
++# CONFIG_FONT_ACORN_8x8 is not set
++# CONFIG_FONT_MINI_4x6 is not set
++# CONFIG_FONT_SUN8x16 is not set
++# CONFIG_FONT_SUN12x22 is not set
++# CONFIG_FONT_10x18 is not set
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++# CONFIG_LOGO_LINUX_VGA16 is not set
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_JACK=y
++CONFIG_SND_SEQUENCER=y
++CONFIG_SND_SEQ_DUMMY=y
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++CONFIG_SND_SEQUENCER_OSS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++# CONFIG_SND_RAWMIDI_SEQ is not set
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_ARM is not set
++# CONFIG_SND_SPI is not set
++# CONFIG_SND_USB is not set
++CONFIG_SND_SOC=y
++CONFIG_SND_S3C24XX_SOC=y
++CONFIG_SND_S3C24XX_SOC_I2S=y
++CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=y
++# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
++# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
++# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
++# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++CONFIG_SND_SOC_WM8753=y
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_DRAGONRISE=y
++# CONFIG_DRAGONRISE_FF is not set
++CONFIG_HID_EZKEY=y
++CONFIG_HID_KYE=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_TWINHAN=y
++CONFIG_HID_KENSINGTON=y
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_NTRIG=y
++CONFIG_HID_PANTHERLORD=y
++# CONFIG_PANTHERLORD_FF is not set
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_HID_GREENASIA=y
++# CONFIG_GREENASIA_FF is not set
++CONFIG_HID_SMARTJOYPLUS=y
++# CONFIG_SMARTJOYPLUS_FF is not set
++CONFIG_HID_TOPSEED=y
++CONFIG_HID_THRUSTMASTER=y
++# CONFIG_THRUSTMASTER_FF is not set
++CONFIG_HID_WACOM=y
++CONFIG_HID_ZEROPLUS=y
++# CONFIG_ZEROPLUS_FF is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_SUSPEND=y
++# CONFIG_USB_OTG is not set
++# CONFIG_USB_MON is not set
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++# CONFIG_USB_WDM is not set
++CONFIG_USB_TMC=m
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
++CONFIG_USB_STORAGE=m
++# CONFIG_USB_STORAGE_DEBUG is not set
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++# CONFIG_USB_STORAGE_ISD200 is not set
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++CONFIG_USB_STORAGE_KARMA=m
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++CONFIG_USB_SERIAL=m
++CONFIG_USB_EZUSB=y
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++# CONFIG_USB_SERIAL_CH341 is not set
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++# CONFIG_USB_SERIAL_CP210X is not set
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++# CONFIG_USB_SERIAL_IUU is not set
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++# CONFIG_USB_SERIAL_MOTOROLA is not set
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++# CONFIG_USB_SERIAL_OTI6858 is not set
++# CONFIG_USB_SERIAL_QUALCOMM is not set
++# CONFIG_USB_SERIAL_SPCP8X5 is not set
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SAFE_PADDED=y
++# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++# CONFIG_USB_SERIAL_SYMBOL is not set
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++# CONFIG_USB_SERIAL_OPTICON is not set
++# CONFIG_USB_SERIAL_DEBUG is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++CONFIG_USB_BERRY_CHARGE=m
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_VST is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_VBUS_DRAW=500
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C_HSOTG is not set
++# CONFIG_USB_GADGET_IMX is not set
++CONFIG_USB_GADGET_S3C2410=y
++CONFIG_USB_S3C2410=y
++# CONFIG_USB_S3C2410_DEBUG is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LANGWELL is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++# CONFIG_USB_ZERO is not set
++# CONFIG_USB_AUDIO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_NOP_USB_XCEIV is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_UNSAFE_RESUME=y
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_AT91 is not set
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++CONFIG_MMC_S3C=y
++# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
++CONFIG_MMC_S3C_PIO=y
++# CONFIG_MMC_S3C_DMA is not set
++# CONFIG_MMC_S3C_PIODMA is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_S3C24XX is not set
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_PWM is not set
++# CONFIG_LEDS_BD2802 is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++CONFIG_RTC_DRV_PCF50633=y
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_S3C=y
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++
++#
++# TI VLYNQ
++#
++CONFIG_STAGING=y
++# CONFIG_STAGING_EXCLUDE_BUILD is not set
++# CONFIG_USB_IP_COMMON is not set
++# CONFIG_PRISM2_USB is not set
++# CONFIG_ECHO is not set
++# CONFIG_COMEDI is not set
++# CONFIG_ASUS_OLED is not set
++# CONFIG_INPUT_MIMIO is not set
++# CONFIG_TRANZPORT is not set
++
++#
++# Android
++#
++
++#
++# Qualcomm MSM Camera And Video
++#
++
++#
++# Camera Sensor Selection
++#
++# CONFIG_INPUT_GPIO is not set
++# CONFIG_DST is not set
++# CONFIG_POHMELFS is not set
++# CONFIG_PLAN9AUTH is not set
++# CONFIG_LINE6_USB is not set
++# CONFIG_USB_SERIAL_QUATECH2 is not set
++# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
++# CONFIG_VT6656 is not set
++# CONFIG_FB_UDL is not set
++
++#
++# RAR Register Driver
++#
++# CONFIG_RAR_REGISTER is not set
++# CONFIG_IIO is not set
++CONFIG_AR6000_WLAN=y
++# CONFIG_AR6000_WLAN_DEBUG is not set
++# CONFIG_AR6000_WLAN_RESET is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=y
++CONFIG_REISERFS_FS=m
++# CONFIG_REISERFS_CHECK is not set
++# CONFIG_REISERFS_PROC_INFO is not set
++# CONFIG_REISERFS_FS_XATTR is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++# CONFIG_ZISOFS is not set
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++CONFIG_SQUASHFS=m
++# CONFIG_SQUASHFS_EMBEDDED is not set
++CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_LOCKD=m
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=m
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=m
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++CONFIG_NLS_CODEPAGE_866=m
++# CONFIG_NLS_CODEPAGE_869 is not set
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++CONFIG_NLS_CODEPAGE_1251=m
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_PRINTK_TIME=y
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++# CONFIG_ENABLE_MUST_CHECK is not set
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++CONFIG_STRIP_ASM_SYMS=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_FRAME_POINTER=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_TRACING_SUPPORT=y
++# CONFIG_FTRACE is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_ARM_UNWIND is not set
++# CONFIG_DEBUG_USER is not set
++CONFIG_DEBUG_S3C_UART=2
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP=y
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_TEST=m
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_XCBC=m
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_GHASH is not set
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_MICHAEL_MIC=m
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_DES=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=m
++CONFIG_CRYPTO_ZLIB=y
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++CONFIG_CRC_T10DIF=y
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++CONFIG_CRC7=y
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
+--
+1.7.0.4
+
--- /dev/null
+From 91e56b8866d0cced4f17251eb509bd212dbd00f4 Mon Sep 17 00:00:00 2001
+From: Martin Jansa <Martin.Jansa@gmail.com>
+Date: Fri, 9 Apr 2010 09:25:52 +0200
+Subject: [PATCH] gta02_drm_defconfig
+
+config used in SHR-U, KMS enabled
+---
+ arch/arm/configs/gta02_drm_defconfig | 2149 ++++++++++++++++++++++++++++++++++
+ 1 files changed, 2149 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/configs/gta02_drm_defconfig
+
+diff --git a/arch/arm/configs/gta02_drm_defconfig b/arch/arm/configs/gta02_drm_defconfig
+new file mode 100644
+index 0000000..05aa130
+--- /dev/null
++++ b/arch/arm/configs/gta02_drm_defconfig
+@@ -0,0 +1,2149 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.32.11
++# Sun Apr 11 14:20:07 2010
++#
++CONFIG_ARM=y
++CONFIG_HAVE_PWM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_NO_IOPORT=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_ARCH_HAS_CPUFREQ=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_FIQ=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TREE_RCU=y
++# CONFIG_TREE_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++CONFIG_RCU_FANOUT=32
++# CONFIG_RCU_FANOUT_EXACT is not set
++# CONFIG_TREE_RCU_TRACE is not set
++CONFIG_IKCONFIG=m
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=18
++# CONFIG_GROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
++# CONFIG_RELAY is not set
++CONFIG_NAMESPACES=y
++# CONFIG_UTS_NS is not set
++# CONFIG_IPC_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_NET_NS is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++CONFIG_RD_BZIP2=y
++CONFIG_RD_LZMA=y
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++
++#
++# Kernel Performance Events And Counters
++#
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_SLOW_WORK=y
++# CONFIG_SLOW_WORK_DEBUG is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++# CONFIG_LBDAF is not set
++CONFIG_BLK_DEV_BSG=y
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=m
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=m
++# CONFIG_DEFAULT_AS is not set
++CONFIG_DEFAULT_DEADLINE=y
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="deadline"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++CONFIG_ARCH_S3C2410=y
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5PC1XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_ARCH_BCMRING is not set
++CONFIG_PLAT_S3C24XX=y
++CONFIG_S3C2410_CLOCK=y
++CONFIG_CPU_S3C244X=y
++CONFIG_S3C24XX_PWM=y
++CONFIG_S3C24XX_GPIO_EXTRA=64
++CONFIG_S3C24XX_GPIO_EXTRA64=y
++CONFIG_S3C2410_DMA=y
++# CONFIG_S3C2410_DMA_DEBUG is not set
++CONFIG_S3C24XX_ADC=y
++CONFIG_PLAT_S3C=y
++CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
++CONFIG_CPU_LLSERIAL_S3C2440=y
++
++#
++# Boot options
++#
++CONFIG_S3C_BOOT_WATCHDOG=y
++CONFIG_S3C_BOOT_ERROR_RESET=y
++CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
++
++#
++# Power management
++#
++# CONFIG_S3C2410_PM_DEBUG is not set
++# CONFIG_S3C2410_PM_CHECK is not set
++CONFIG_S3C_LOWLEVEL_UART_PORT=2
++CONFIG_S3C_GPIO_SPACE=0
++CONFIG_S3C_DMA=y
++CONFIG_S3C_DEV_USB_HOST=y
++CONFIG_S3C_DEV_NAND=y
++
++#
++# S3C2400 Machines
++#
++CONFIG_CPU_S3C2410_DMA=y
++CONFIG_S3C2410_PM=y
++CONFIG_S3C2410_GPIO=y
++
++#
++# S3C2410 Machines
++#
++# CONFIG_ARCH_SMDK2410 is not set
++# CONFIG_ARCH_H1940 is not set
++# CONFIG_MACH_N30 is not set
++# CONFIG_ARCH_BAST is not set
++# CONFIG_MACH_OTOM is not set
++# CONFIG_MACH_AML_M5900 is not set
++# CONFIG_MACH_TCT_HAMMER is not set
++# CONFIG_MACH_VR1000 is not set
++# CONFIG_MACH_QT2410 is not set
++
++#
++# S3C2412 Machines
++#
++# CONFIG_MACH_JIVE is not set
++# CONFIG_MACH_SMDK2413 is not set
++# CONFIG_MACH_SMDK2412 is not set
++# CONFIG_MACH_VSTMS is not set
++
++#
++# S3C2440 Machines
++#
++# CONFIG_MACH_ANUBIS is not set
++# CONFIG_MACH_OSIRIS is not set
++# CONFIG_MACH_RX3715 is not set
++# CONFIG_ARCH_S3C2440 is not set
++# CONFIG_MACH_NEXCODER_2440 is not set
++# CONFIG_MACH_AT2440EVB is not set
++# CONFIG_MACH_MINI2440 is not set
++CONFIG_CPU_S3C2442=y
++
++#
++# S3C2442 Machines
++#
++CONFIG_MACH_NEO1973_GTA02=y
++
++#
++# S3C2443 Machines
++#
++# CONFIG_MACH_SMDK2443 is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM920T=y
++CONFIG_CPU_32v4T=y
++CONFIG_CPU_ABRT_EV4T=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_V4WT=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT_NONE is not set
++# CONFIG_PREEMPT_VOLUNTARY is not set
++CONFIG_PREEMPT=y
++CONFIG_HZ=200
++CONFIG_AEABI=y
++# CONFIG_OABI_COMPAT is not set
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_HAVE_MLOCK=y
++CONFIG_HAVE_MLOCKED_PAGE_BIT=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="unused -- bootloader passes ATAG list quiet "
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPU_IDLE=y
++CONFIG_CPU_IDLE_GOV_LADDER=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++# CONFIG_APM_EMULATION is not set
++# CONFIG_PM_RUNTIME is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++CONFIG_XFRM_MIGRATE=y
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++CONFIG_NET_KEY_MIGRATE=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_NET_IPGRE_BROADCAST is not set
++CONFIG_IP_MROUTE=y
++# CONFIG_IP_PIMSM_V1 is not set
++# CONFIG_IP_PIMSM_V2 is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++CONFIG_TCP_CONG_ADVANCED=y
++# CONFIG_TCP_CONG_BIC is not set
++# CONFIG_TCP_CONG_CUBIC is not set
++CONFIG_TCP_CONG_WESTWOOD=y
++# CONFIG_TCP_CONG_HTCP is not set
++# CONFIG_TCP_CONG_HSTCP is not set
++# CONFIG_TCP_CONG_HYBLA is not set
++# CONFIG_TCP_CONG_VEGAS is not set
++# CONFIG_TCP_CONG_SCALABLE is not set
++# CONFIG_TCP_CONG_LP is not set
++# CONFIG_TCP_CONG_VENO is not set
++# CONFIG_TCP_CONG_YEAH is not set
++# CONFIG_TCP_CONG_ILLINOIS is not set
++# CONFIG_DEFAULT_BIC is not set
++# CONFIG_DEFAULT_CUBIC is not set
++# CONFIG_DEFAULT_HTCP is not set
++# CONFIG_DEFAULT_VEGAS is not set
++CONFIG_DEFAULT_WESTWOOD=y
++# CONFIG_DEFAULT_RENO is not set
++CONFIG_DEFAULT_TCP_CONG="westwood"
++CONFIG_TCP_MD5SIG=y
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++CONFIG_BRIDGE_NETFILTER=y
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_QUEUE=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++# CONFIG_NF_CONNTRACK_EVENTS is not set
++# CONFIG_NF_CT_PROTO_DCCP is not set
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++# CONFIG_NF_CT_PROTO_UDPLITE is not set
++# CONFIG_NF_CONNTRACK_AMANDA is not set
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++# CONFIG_NETFILTER_TPROXY is not set
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++CONFIG_NETFILTER_XT_TARGET_DSCP=m
++CONFIG_NETFILTER_XT_TARGET_HL=m
++# CONFIG_NETFILTER_XT_TARGET_LED is not set
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
++# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
++# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_HL=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
++CONFIG_NETFILTER_XT_MATCH_SCTP=m
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
++# CONFIG_NETFILTER_XT_MATCH_OSF is not set
++# CONFIG_IP_VS is not set
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_PROTO_SCTP=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++# CONFIG_NF_NAT_AMANDA is not set
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++# CONFIG_IP_NF_ARPTABLES is not set
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++# CONFIG_IP6_NF_QUEUE is not set
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++# CONFIG_IP6_NF_RAW is not set
++CONFIG_BRIDGE_NF_EBTABLES=m
++CONFIG_BRIDGE_EBT_BROUTE=m
++CONFIG_BRIDGE_EBT_T_FILTER=m
++CONFIG_BRIDGE_EBT_T_NAT=m
++CONFIG_BRIDGE_EBT_802_3=m
++CONFIG_BRIDGE_EBT_AMONG=m
++CONFIG_BRIDGE_EBT_ARP=m
++CONFIG_BRIDGE_EBT_IP=m
++# CONFIG_BRIDGE_EBT_IP6 is not set
++CONFIG_BRIDGE_EBT_LIMIT=m
++CONFIG_BRIDGE_EBT_MARK=m
++CONFIG_BRIDGE_EBT_PKTTYPE=m
++CONFIG_BRIDGE_EBT_STP=m
++CONFIG_BRIDGE_EBT_VLAN=m
++CONFIG_BRIDGE_EBT_ARPREPLY=m
++CONFIG_BRIDGE_EBT_DNAT=m
++CONFIG_BRIDGE_EBT_MARK_T=m
++CONFIG_BRIDGE_EBT_REDIRECT=m
++CONFIG_BRIDGE_EBT_SNAT=m
++CONFIG_BRIDGE_EBT_LOG=m
++CONFIG_BRIDGE_EBT_ULOG=m
++# CONFIG_BRIDGE_EBT_NFLOG is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_STP=y
++CONFIG_BRIDGE=y
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=y
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_IEEE802154 is not set
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_PRIO=m
++# CONFIG_NET_SCH_MULTIQ is not set
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++# CONFIG_NET_SCH_DRR is not set
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++CONFIG_CLS_U32_PERF=y
++CONFIG_CLS_U32_MARK=y
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++# CONFIG_NET_CLS_FLOW is not set
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++# CONFIG_NET_CLS_IND is not set
++CONFIG_NET_SCH_FIFO=y
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++CONFIG_BT=y
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=y
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=y
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=y
++
++#
++# Bluetooth device drivers
++#
++CONFIG_BT_HCIBTUSB=y
++# CONFIG_BT_HCIBTSDIO is not set
++# CONFIG_BT_HCIUART is not set
++# CONFIG_BT_HCIBCM203X is not set
++# CONFIG_BT_HCIBPA10X is not set
++# CONFIG_BT_HCIBFUSB is not set
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_BT_MRVL is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_FIB_RULES=y
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++CONFIG_CFG80211_DEFAULT_PS_VALUE=0
++CONFIG_WIRELESS_OLD_REGULATORY=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
++# CONFIG_LIB80211 is not set
++
++#
++# CFG80211 needs to be enabled for MAC80211
++#
++# CONFIG_WIMAX is not set
++CONFIG_RFKILL=y
++CONFIG_RFKILL_LEDS=y
++CONFIG_RFKILL_INPUT=y
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH=""
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_FIRMWARE_IN_KERNEL is not set
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=m
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_TESTS is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++CONFIG_MTD_ROM=y
++CONFIG_MTD_ABSENT=y
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++# CONFIG_MTD_PHYSMAP_COMPAT is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SST25L is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++CONFIG_MTD_NAND_S3C2410=y
++# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
++CONFIG_MTD_NAND_S3C2410_HWECC=y
++# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++CONFIG_MTD_UBI_GLUEBI=y
++
++#
++# UBI debugging options
++#
++CONFIG_MTD_UBI_DEBUG=y
++# CONFIG_MTD_UBI_DEBUG_MSG is not set
++# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
++CONFIG_MTD_UBI_DEBUG_DISABLE_BGT=y
++# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
++# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
++# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
++
++#
++# Additional UBI debugging messages
++#
++# CONFIG_MTD_UBI_DEBUG_MSG_BLD is not set
++# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
++# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
++# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_UB=m
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MG_DISK is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_SCAN_ASYNC=y
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_LIBFC is not set
++# CONFIG_LIBFCOE is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_SCSI_OSD_INITIATOR is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++CONFIG_MII=m
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++CONFIG_WLAN=y
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++CONFIG_USB_CATC=m
++CONFIG_USB_KAWETH=m
++CONFIG_USB_PEGASUS=m
++CONFIG_USB_RTL8150=m
++CONFIG_USB_USBNET=m
++# CONFIG_USB_NET_AX8817X is not set
++CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_CDC_EEM is not set
++# CONFIG_USB_NET_DM9601 is not set
++# CONFIG_USB_NET_SMSC95XX is not set
++# CONFIG_USB_NET_GL620A is not set
++CONFIG_USB_NET_NET1080=m
++# CONFIG_USB_NET_PLUSB is not set
++# CONFIG_USB_NET_MCS7830 is not set
++# CONFIG_USB_NET_RNDIS_HOST is not set
++CONFIG_USB_NET_CDC_SUBSET=m
++# CONFIG_USB_ALI_M5632 is not set
++# CONFIG_USB_AN2720 is not set
++CONFIG_USB_BELKIN=y
++CONFIG_USB_ARMLINUX=y
++# CONFIG_USB_EPSON2888 is not set
++# CONFIG_USB_KC2190 is not set
++CONFIG_USB_NET_ZAURUS=m
++# CONFIG_USB_HSO is not set
++# CONFIG_USB_NET_INT51X1 is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ADP5588 is not set
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_QT2160 is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_KEYBOARD_MATRIX is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_MAX7359 is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_OPENCORES is not set
++CONFIG_KEYBOARD_STOWAWAY=m
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_FILTER=y
++CONFIG_TOUCHSCREEN_FILTER_GROUP=y
++CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y
++CONFIG_TOUCHSCREEN_FILTER_MEAN=y
++CONFIG_TOUCHSCREEN_FILTER_LINEAR=y
++CONFIG_TOUCHSCREEN_S3C2410=y
++# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
++# CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_AD7877 is not set
++# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
++# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
++# CONFIG_TOUCHSCREEN_AD7879 is not set
++# CONFIG_TOUCHSCREEN_EETI is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MCS5000 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_TOUCHSCREEN_W90X900 is not set
++CONFIG_INPUT_MISC=y
++# CONFIG_INPUT_ATI_REMOTE is not set
++# CONFIG_INPUT_ATI_REMOTE2 is not set
++# CONFIG_INPUT_KEYSPAN_REMOTE is not set
++# CONFIG_INPUT_POWERMATE is not set
++# CONFIG_INPUT_YEALINK is not set
++# CONFIG_INPUT_CM109 is not set
++CONFIG_INPUT_UINPUT=m
++CONFIG_INPUT_PCF50633_PMU=y
++# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
++CONFIG_INPUT_LIS302DL=y
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++# CONFIG_SERIO_SERPORT is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++# CONFIG_DEVKMEM is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_SAMSUNG=y
++CONFIG_SERIAL_SAMSUNG_UARTS=3
++CONFIG_SERIAL_SAMSUNG_CONSOLE=y
++CONFIG_SERIAL_S3C2440=y
++# CONFIG_SERIAL_MAX3100 is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_COMPAT=y
++CONFIG_I2C_CHARDEV=y
++# CONFIG_I2C_HELPER_AUTO is not set
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=y
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_DESIGNWARE is not set
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++CONFIG_I2C_S3C2410=y
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_GPIO=y
++CONFIG_SPI_S3C24XX=y
++CONFIG_SPI_S3C24XX_GPIO=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++
++#
++# PPS support
++#
++# CONFIG_PPS is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++CONFIG_GPIO_PCF50633=y
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_GPIO_MC33880 is not set
++
++#
++# AC97 GPIO expanders:
++#
++# CONFIG_W1 is not set
++CONFIG_POWER_SUPPLY=y
++# CONFIG_POWER_SUPPLY_DEBUG is not set
++# CONFIG_PDA_POWER is not set
++# CONFIG_BATTERY_DS2760 is not set
++# CONFIG_BATTERY_DS2782 is not set
++# CONFIG_BATTERY_BQ27x00 is not set
++# CONFIG_BATTERY_MAX17040 is not set
++CONFIG_CHARGER_PCF50633=y
++CONFIG_BATTERY_BQ27000_HDQ=y
++CONFIG_HDQ_GPIO_BITBANG=y
++# CONFIG_BATTERY_PLATFORM is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++CONFIG_SOFT_WATCHDOG=y
++CONFIG_S3C2410_WATCHDOG=y
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++CONFIG_MFD_CORE=y
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_TWL4030_CORE is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM831X is not set
++# CONFIG_MFD_WM8350_I2C is not set
++CONFIG_MFD_PCF50633=y
++# CONFIG_MFD_MC13783 is not set
++CONFIG_PCF50633_ADC=y
++# CONFIG_AB3100_CORE is not set
++# CONFIG_EZX_PCAP is not set
++CONFIG_MFD_GLAMO=y
++# CONFIG_MFD_GLAMO_FB is not set
++CONFIG_MFD_GLAMO_GPIO=y
++CONFIG_MFD_GLAMO_MCI=y
++CONFIG_MFD_GLAMO_DRM=y
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++CONFIG_REGULATOR_FIXED_VOLTAGE=y
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
++# CONFIG_REGULATOR_BQ24022 is not set
++# CONFIG_REGULATOR_MAX1586 is not set
++CONFIG_REGULATOR_PCF50633=y
++# CONFIG_REGULATOR_LP3971 is not set
++# CONFIG_REGULATOR_TPS65023 is not set
++# CONFIG_REGULATOR_TPS6507X is not set
++# CONFIG_MEDIA_SUPPORT is not set
++
++#
++# Graphics support
++#
++CONFIG_DRM=y
++CONFIG_DRM_KMS_HELPER=y
++# CONFIG_DRM_MGA is not set
++# CONFIG_DRM_VIA is not set
++# CONFIG_DRM_SAVAGE is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_UVESA is not set
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_TMIO is not set
++# CONFIG_FB_S3C2410 is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++# CONFIG_LCD_LMS283GF05 is not set
++# CONFIG_LCD_LTV350QV is not set
++# CONFIG_LCD_ILI9320 is not set
++# CONFIG_LCD_TDO24M is not set
++# CONFIG_LCD_VGG2432A4 is not set
++# CONFIG_LCD_PLATFORM is not set
++CONFIG_LCD_JBT6K74=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++# CONFIG_BACKLIGHT_GENERIC is not set
++CONFIG_BACKLIGHT_PWM=y
++CONFIG_BACKLIGHT_PCF50633=y
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++# CONFIG_LOGO is not set
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SOUND_OSS_CORE_PRECLAIM=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_JACK=y
++CONFIG_SND_SEQUENCER=y
++CONFIG_SND_SEQ_DUMMY=y
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++CONFIG_SND_SEQUENCER_OSS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++# CONFIG_SND_RAWMIDI_SEQ is not set
++# CONFIG_SND_OPL3_LIB_SEQ is not set
++# CONFIG_SND_OPL4_LIB_SEQ is not set
++# CONFIG_SND_SBAWE_SEQ is not set
++# CONFIG_SND_EMU10K1_SEQ is not set
++# CONFIG_SND_DRIVERS is not set
++# CONFIG_SND_ARM is not set
++# CONFIG_SND_SPI is not set
++# CONFIG_SND_USB is not set
++CONFIG_SND_SOC=y
++CONFIG_SND_S3C24XX_SOC=y
++CONFIG_SND_S3C24XX_SOC_I2S=y
++CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=y
++# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
++# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
++# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
++# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++CONFIG_SND_SOC_WM8753=y
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++CONFIG_HID_A4TECH=y
++CONFIG_HID_APPLE=y
++CONFIG_HID_BELKIN=y
++CONFIG_HID_CHERRY=y
++CONFIG_HID_CHICONY=y
++CONFIG_HID_CYPRESS=y
++CONFIG_HID_DRAGONRISE=y
++# CONFIG_DRAGONRISE_FF is not set
++CONFIG_HID_EZKEY=y
++CONFIG_HID_KYE=y
++CONFIG_HID_GYRATION=y
++CONFIG_HID_TWINHAN=y
++CONFIG_HID_KENSINGTON=y
++CONFIG_HID_LOGITECH=y
++# CONFIG_LOGITECH_FF is not set
++# CONFIG_LOGIRUMBLEPAD2_FF is not set
++CONFIG_HID_MICROSOFT=y
++CONFIG_HID_MONTEREY=y
++CONFIG_HID_NTRIG=y
++CONFIG_HID_PANTHERLORD=y
++# CONFIG_PANTHERLORD_FF is not set
++CONFIG_HID_PETALYNX=y
++CONFIG_HID_SAMSUNG=y
++CONFIG_HID_SONY=y
++CONFIG_HID_SUNPLUS=y
++CONFIG_HID_GREENASIA=y
++# CONFIG_GREENASIA_FF is not set
++CONFIG_HID_SMARTJOYPLUS=y
++# CONFIG_SMARTJOYPLUS_FF is not set
++CONFIG_HID_TOPSEED=y
++CONFIG_HID_THRUSTMASTER=y
++# CONFIG_THRUSTMASTER_FF is not set
++CONFIG_HID_WACOM=y
++CONFIG_HID_ZEROPLUS=y
++# CONFIG_ZEROPLUS_FF is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_SUSPEND=y
++# CONFIG_USB_OTG is not set
++# CONFIG_USB_MON is not set
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_ISP1760_HCD is not set
++# CONFIG_USB_ISP1362_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++# CONFIG_USB_MUSB_HDRC is not set
++# CONFIG_USB_GADGET_MUSB_HDRC is not set
++
++#
++# USB Device Class drivers
++#
++CONFIG_USB_ACM=m
++CONFIG_USB_PRINTER=m
++# CONFIG_USB_WDM is not set
++CONFIG_USB_TMC=m
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
++#
++
++#
++# also be needed; see USB_STORAGE Help for more info
++#
++CONFIG_USB_STORAGE=m
++# CONFIG_USB_STORAGE_DEBUG is not set
++CONFIG_USB_STORAGE_DATAFAB=m
++CONFIG_USB_STORAGE_FREECOM=m
++# CONFIG_USB_STORAGE_ISD200 is not set
++CONFIG_USB_STORAGE_USBAT=m
++CONFIG_USB_STORAGE_SDDR09=m
++CONFIG_USB_STORAGE_SDDR55=m
++CONFIG_USB_STORAGE_JUMPSHOT=m
++CONFIG_USB_STORAGE_ALAUDA=m
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++CONFIG_USB_STORAGE_KARMA=m
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++CONFIG_USB_SERIAL=m
++CONFIG_USB_EZUSB=y
++CONFIG_USB_SERIAL_GENERIC=y
++CONFIG_USB_SERIAL_AIRCABLE=m
++CONFIG_USB_SERIAL_ARK3116=m
++CONFIG_USB_SERIAL_BELKIN=m
++# CONFIG_USB_SERIAL_CH341 is not set
++CONFIG_USB_SERIAL_WHITEHEAT=m
++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
++# CONFIG_USB_SERIAL_CP210X is not set
++CONFIG_USB_SERIAL_CYPRESS_M8=m
++CONFIG_USB_SERIAL_EMPEG=m
++CONFIG_USB_SERIAL_FTDI_SIO=m
++CONFIG_USB_SERIAL_FUNSOFT=m
++CONFIG_USB_SERIAL_VISOR=m
++CONFIG_USB_SERIAL_IPAQ=m
++CONFIG_USB_SERIAL_IR=m
++CONFIG_USB_SERIAL_EDGEPORT=m
++CONFIG_USB_SERIAL_EDGEPORT_TI=m
++CONFIG_USB_SERIAL_GARMIN=m
++CONFIG_USB_SERIAL_IPW=m
++# CONFIG_USB_SERIAL_IUU is not set
++CONFIG_USB_SERIAL_KEYSPAN_PDA=m
++CONFIG_USB_SERIAL_KEYSPAN=m
++CONFIG_USB_SERIAL_KLSI=m
++CONFIG_USB_SERIAL_KOBIL_SCT=m
++CONFIG_USB_SERIAL_MCT_U232=m
++CONFIG_USB_SERIAL_MOS7720=m
++CONFIG_USB_SERIAL_MOS7840=m
++# CONFIG_USB_SERIAL_MOTOROLA is not set
++CONFIG_USB_SERIAL_NAVMAN=m
++CONFIG_USB_SERIAL_PL2303=m
++# CONFIG_USB_SERIAL_OTI6858 is not set
++# CONFIG_USB_SERIAL_QUALCOMM is not set
++# CONFIG_USB_SERIAL_SPCP8X5 is not set
++CONFIG_USB_SERIAL_HP4X=m
++CONFIG_USB_SERIAL_SAFE=m
++CONFIG_USB_SERIAL_SAFE_PADDED=y
++# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
++CONFIG_USB_SERIAL_SIERRAWIRELESS=m
++# CONFIG_USB_SERIAL_SYMBOL is not set
++CONFIG_USB_SERIAL_TI=m
++CONFIG_USB_SERIAL_CYBERJACK=m
++CONFIG_USB_SERIAL_XIRCOM=m
++CONFIG_USB_SERIAL_OPTION=m
++CONFIG_USB_SERIAL_OMNINET=m
++# CONFIG_USB_SERIAL_OPTICON is not set
++# CONFIG_USB_SERIAL_DEBUG is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++CONFIG_USB_BERRY_CHARGE=m
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++CONFIG_USB_TRANCEVIBRATOR=m
++CONFIG_USB_IOWARRIOR=m
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_VST is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=500
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_R8A66597 is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C_HSOTG is not set
++# CONFIG_USB_GADGET_IMX is not set
++CONFIG_USB_GADGET_S3C2410=y
++CONFIG_USB_S3C2410=y
++# CONFIG_USB_S3C2410_DEBUG is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LANGWELL is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++# CONFIG_USB_ZERO is not set
++# CONFIG_USB_AUDIO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_ETH_EEM is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++
++#
++# OTG and related infrastructure
++#
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_NOP_USB_XCEIV is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_UNSAFE_RESUME=y
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_AT91 is not set
++# CONFIG_MMC_ATMELMCI is not set
++# CONFIG_MMC_SPI is not set
++CONFIG_MMC_S3C=y
++# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
++CONFIG_MMC_S3C_PIO=y
++# CONFIG_MMC_S3C_DMA is not set
++# CONFIG_MMC_S3C_PIODMA is not set
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_S3C24XX is not set
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++# CONFIG_LEDS_LP3944 is not set
++# CONFIG_LEDS_PCA955X is not set
++# CONFIG_LEDS_DAC124S085 is not set
++# CONFIG_LEDS_PWM is not set
++# CONFIG_LEDS_BD2802 is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++# CONFIG_RTC_DRV_RX8025 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++# CONFIG_RTC_DRV_PCF2123 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++CONFIG_RTC_DRV_PCF50633=y
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_S3C=y
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_UIO is not set
++
++#
++# TI VLYNQ
++#
++# CONFIG_STAGING is not set
++CONFIG_AR6000_WLAN=y
++# CONFIG_AR6000_WLAN_DEBUG is not set
++# CONFIG_AR6000_WLAN_RESET is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_REISERFS_FS=m
++# CONFIG_REISERFS_CHECK is not set
++# CONFIG_REISERFS_PROC_INFO is not set
++# CONFIG_REISERFS_FS_XATTR is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_FILE_LOCKING=y
++CONFIG_FSNOTIFY=y
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++CONFIG_AUTOFS4_FS=m
++CONFIG_FUSE_FS=m
++CONFIG_CUSE=m
++CONFIG_GENERIC_ACL=y
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++# CONFIG_ZISOFS is not set
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++CONFIG_TMPFS_POSIX_ACL=y
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_UBIFS_FS=y
++CONFIG_UBIFS_FS_XATTR=y
++CONFIG_UBIFS_FS_ADVANCED_COMPR=y
++CONFIG_UBIFS_FS_LZO=y
++CONFIG_UBIFS_FS_ZLIB=y
++CONFIG_UBIFS_FS_DEBUG=y
++CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
++CONFIG_UBIFS_FS_DEBUG_CHKS=y
++# CONFIG_CRAMFS is not set
++CONFIG_SQUASHFS=m
++# CONFIG_SQUASHFS_EMBEDDED is not set
++CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=m
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++# CONFIG_NFS_V4_1 is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V2_ACL=y
++CONFIG_NFSD_V3=y
++CONFIG_NFSD_V3_ACL=y
++CONFIG_NFSD_V4=y
++CONFIG_LOCKD=m
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_ACL_SUPPORT=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=m
++CONFIG_SUNRPC_GSS=m
++CONFIG_RPCSEC_GSS_KRB5=m
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++# CONFIG_CIFS_XATTR is not set
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=m
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++CONFIG_NLS_CODEPAGE_866=m
++# CONFIG_NLS_CODEPAGE_869 is not set
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++CONFIG_PRINTK_TIME=y
++# CONFIG_ENABLE_WARN_DEPRECATED is not set
++# CONFIG_ENABLE_MUST_CHECK is not set
++CONFIG_FRAME_WARN=1024
++# CONFIG_MAGIC_SYSRQ is not set
++CONFIG_STRIP_ASM_SYMS=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_MEMORY_INIT=y
++CONFIG_FRAME_POINTER=y
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_TRACING_SUPPORT=y
++# CONFIG_FTRACE is not set
++# CONFIG_DYNAMIC_DEBUG is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_ARM_UNWIND is not set
++# CONFIG_DEBUG_USER is not set
++CONFIG_DEBUG_S3C_UART=2
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP=y
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_AUTHENC=m
++CONFIG_CRYPTO_TEST=m
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_XCBC=m
++# CONFIG_CRYPTO_VMAC is not set
++
++#
++# Digest
++#
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_GHASH is not set
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_MICHAEL_MIC=m
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_DES=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_ZLIB=y
++CONFIG_CRYPTO_LZO=y
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++# CONFIG_CRYPTO_HW is not set
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=y
++CONFIG_CRC_T10DIF=y
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++CONFIG_CRC7=y
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_DECOMPRESS_BZIP2=y
++CONFIG_DECOMPRESS_LZMA=y
++CONFIG_TEXTSEARCH=y
++CONFIG_TEXTSEARCH_KMP=m
++CONFIG_TEXTSEARCH_BM=m
++CONFIG_TEXTSEARCH_FSM=m
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
+--
+1.7.0.4
+
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.11
-# Thu Apr 8 17:08:39 2010
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_FIQ=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBDAF is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=64
-CONFIG_S3C24XX_GPIO_EXTRA64=y
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-CONFIG_S3C_BOOT_WATCHDOG=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=2
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_DMA=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_NAND=y
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_TCT_HAMMER is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_JIVE is not set
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_AT2440EVB is not set
-# CONFIG_MACH_MINI2440 is not set
-CONFIG_CPU_S3C2442=y
-
-#
-# S3C2442 Machines
-#
-CONFIG_MACH_NEO1973_GTA02=y
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_HZ=200
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="unused -- bootloader passes ATAG list quiet "
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CUBIC is not set
-CONFIG_TCP_CONG_WESTWOOD=y
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_DEFAULT_BIC is not set
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-CONFIG_DEFAULT_WESTWOOD=y
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="westwood"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=y
-CONFIG_BRIDGE=y
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=y
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=y
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-CONFIG_RFKILL=y
-CONFIG_RFKILL_LEDS=y
-CONFIG_RFKILL_INPUT=y
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-CONFIG_MTD_ABSENT=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-CONFIG_MTD_UBI_DEBUG=y
-# CONFIG_MTD_UBI_DEBUG_MSG is not set
-# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
-CONFIG_MTD_UBI_DEBUG_DISABLE_BGT=y
-# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
-# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
-# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
-
-#
-# Additional UBI debugging messages
-#
-# CONFIG_MTD_UBI_DEBUG_MSG_BLD is not set
-# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
-# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
-# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FILTER=y
-CONFIG_TOUCHSCREEN_FILTER_GROUP=y
-CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y
-CONFIG_TOUCHSCREEN_FILTER_MEAN=y
-CONFIG_TOUCHSCREEN_FILTER_LINEAR=y
-CONFIG_TOUCHSCREEN_S3C2410=y
-# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_PCF50633_PMU=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_S3C24XX=y
-CONFIG_SPI_S3C24XX_GPIO=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-CONFIG_GPIO_PCF50633=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_CHARGER_PCF50633=y
-CONFIG_BATTERY_BQ27000_HDQ=y
-CONFIG_HDQ_GPIO_BITBANG=y
-# CONFIG_BATTERY_PLATFORM is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-CONFIG_MFD_PCF50633=y
-# CONFIG_MFD_MC13783 is not set
-CONFIG_PCF50633_ADC=y
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-CONFIG_MFD_GLAMO=y
-# CONFIG_MFD_GLAMO_FB is not set
-CONFIG_MFD_GLAMO_GPIO=y
-CONFIG_MFD_GLAMO_MCI=y
-CONFIG_MFD_GLAMO_DRM=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_PCF50633=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_DRM=y
-CONFIG_DRM_KMS_HELPER=y
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_S3C2410 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LCD_JBT6K74=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BACKLIGHT_PCF50633=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_S3C24XX_SOC=m
-CONFIG_SND_S3C24XX_SOC_I2S=m
-CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m
-# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
-# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM8753=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
-CONFIG_HID_WACOM=y
-CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-CONFIG_MMC_S3C=y
-# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
-CONFIG_MMC_S3C_PIO=y
-# CONFIG_MMC_S3C_DMA is not set
-# CONFIG_MMC_S3C_PIODMA is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_S3C24XX is not set
-# CONFIG_LEDS_PCA9532 is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_PCF50633=y
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-CONFIG_AR6000_WLAN=m
-# CONFIG_AR6000_WLAN_DEBUG is not set
-# CONFIG_AR6000_WLAN_RESET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UBIFS_FS_DEBUG=y
-CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
-CONFIG_UBIFS_FS_DEBUG_CHKS=y
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_S3C_UART=2
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
SRCREV = "14be1091928fcce66812a85129768fb253b36420"
OEV = "oe1"
PV = "${KERNEL_RELEASE}-${OEV}+gitr${SRCREV}"
-PR = "r6"
+PR = "r7"
SRC_URI = "\
git://git.openmoko.org/git/kernel.git;protocol=git;branch=om-gta02-2.6.32 \
file://0001-Revert-s3cmci-initialize-default-platform-data-no_wp.patch;patch=1 \
# latest stable patch for ubi fix 943e167cb3e8fb191894bde8a4a75db78531a7c8
${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${KERNEL_RELEASE}.bz2;patch=1;name=stablepatch \
- file://defconfig \
# build fix
file://0001-wm8753-fix-build-with-gcc-4.4.2-which-works-ok-with-.patch;patch=1 \
# patches from Weiss's gdrm-2.6.32 branch
file://0014-Clean-up-JBT-hooks-and-allow-resolution-switching.patch;patch=1 \
file://0015-ar6000-send-userspace-an-event-on-disconnection.patch;patch=1 \
file://0016-Enable-display-before-trying-to-set-mode-or-base.patch;patch=1 \
+ file://0017-accels.patch.patch;patch=1 \
+ file://0018-usbhost.patch.patch;patch=1 \
+ file://0019-ar6000_delay.patch.patch;patch=1 \
+ file://0020-save_regs.patch.patch;patch=1 \
+ file://0021-gta02_defconfig.patch;patch=1 \
+ file://0022-gta02_drm_defconfig.patch;patch=1 \
"
SRC_URI[stablepatch.md5sum] = "855c248334a71ef5ca3d8cb89d51334f"
SRC_URI[stablepatch.sha256sum] = "edb26ff62b2f95b0d6e5c434d777af2815600a990f1c7c5d2c7faad9b4e4bc2b"
-
S = "${WORKDIR}/git"
-do_configure_prepend() {
- install -m 644 ${WORKDIR}/defconfig ${WORKDIR}/defconfig-oe
+CONFIG_NAME_om-gta02 = "gta02_drm_defconfig"
+
+do_configure_prepend() {
+ install -m 644 ./arch/arm/configs/${CONFIG_NAME} ${WORKDIR}/defconfig-oe
}
git.openpandora.org / openembedded.git / commitdiff