--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.37 Kernel Configuration
+# Mon Jan 10 16:05:41 2011
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_CGROUPS is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_S5PV310 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_WATCHDOG=y
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=2
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_PULL_UP=y
+CONFIG_SAMSUNG_GPIO_EXTRA=64
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_ADC=y
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_WDT=y
+CONFIG_S3C_DEV_NAND=y
+CONFIG_S3C_DMA=y
+
+#
+# Power management
+#
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
+CONFIG_CPU_LLSERIAL_S3C2410=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+
+#
+# S3C2400 Machines
+#
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+
+#
+# S3C2410 Machines
+#
+# CONFIG_ARCH_SMDK2410 is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_MACH_N30 is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_AML_M5900 is not set
+# CONFIG_MACH_TCT_HAMMER is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_QT2410 is not set
+CONFIG_MACH_NEO1973_GTA01=y
+
+#
+# S3C2412 Machines
+#
+# CONFIG_MACH_JIVE is not set
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_SMDK2412 is not set
+# CONFIG_MACH_VSTMS is not set
+
+#
+# S3C2416 Machines
+#
+# CONFIG_MACH_SMDK2416 is not set
+
+#
+# S3C2440 and S3C2442 Machines
+#
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_NEO1973_GTA02 is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_SMDK2440_CPU2440 is not set
+# CONFIG_SMDK2440_CPU2442 is not set
+# CONFIG_MACH_AT2440EVB is not set
+# CONFIG_MACH_MINI2440 is not set
+# CONFIG_MACH_RX1950 is not set
+
+#
+# S3C2443 Machines
+#
+# CONFIG_MACH_SMDK2443 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="unused -- bootloader passes ATAG list debug "
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_NVS=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+# CONFIG_NET_IPGRE_DEMUX is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_RAW is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+CONFIG_MTD_ABSENT=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_S3C2410=y
+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
+CONFIG_MTD_NAND_S3C2410_HWECC=y
+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+CONFIG_OPENMOKO_RESUME_REASON=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=m
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_QT602240 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+CONFIG_INPUT_PCF50606_PMU=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C2410=y
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_SMBUS is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_HAVE_S3C2410_I2C=y
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_S3C24XX=y
+# CONFIG_SPI_S3C24XX_FIQ is not set
+CONFIG_SPI_S3C24XX_GPIO=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_VX855 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_S3C_ADC is not set
+CONFIG_CHARGER_PCF50606=y
+CONFIG_BATTERY_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_PCF50606_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_GLAMO is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_MFD_PCF50606=y
+CONFIG_PCF50606_ADC=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_REGULATOR_PCF50606=y
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+CONFIG_LCD_JBT6K74=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m
+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
+# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
+# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
+# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_LM4857=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=m
+# CONFIG_HID_ACRUX_FF is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
+# CONFIG_HID_ELECOM is not set
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=m
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+# CONFIG_HID_STANTUM is not set
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_WACOM=m
+# CONFIG_HID_WACOM_POWER_SUPPLY is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=m
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SAMBA is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=m
+# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+CONFIG_MMC_S3C=y
+# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
+CONFIG_MMC_S3C_PIO=y
+# CONFIG_MMC_S3C_DMA is not set
+# CONFIG_MMC_S3C_PIODMA is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_S3C24XX=y
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_REGULATOR=y
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_PCF50606=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+# CONFIG_AR6000_WLAN is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_EXPORTFS=m
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_XATTR is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_NEW_IDMAPPER is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_DEPRECATED=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=m
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_BKL=y
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=2
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+All patches from openmoko repository
+
+http://git.openmoko.org/?p=kernel.git;a=commit;h=c07bd69719b805852e24783aec08db4edcdb767d
+
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7193884..6534c00 100644
--- a/arch/arm/boot/compressed/head.S
.macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
-diff --git a/arch/arm/configs/gta02_defconfig b/arch/arm/configs/gta02_defconfig
-new file mode 100644
-index 0000000..0e4864d
---- /dev/null
-+++ b/arch/arm/configs/gta02_defconfig
-@@ -0,0 +1,1938 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux/arm 2.6.37 Kernel Configuration
-+# Wed Jan 5 19:56:16 2011
-+#
-+CONFIG_ARM=y
-+CONFIG_HAVE_PWM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_ARCH_USES_GETTIMEOFFSET=y
-+CONFIG_HAVE_PROC_CPU=y
-+CONFIG_NO_IOPORT=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_ARCH_HAS_CPUFREQ=y
-+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_NEED_DMA_MAP_STATE=y
-+CONFIG_FIQ=y
-+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-+CONFIG_HAVE_IRQ_WORK=y
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_HAVE_KERNEL_GZIP=y
-+CONFIG_HAVE_KERNEL_LZMA=y
-+CONFIG_HAVE_KERNEL_LZO=y
-+CONFIG_KERNEL_GZIP=y
-+# CONFIG_KERNEL_LZMA is not set
-+# CONFIG_KERNEL_LZO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-+# CONFIG_SPARSE_IRQ is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_TINY_RCU=y
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=18
-+# CONFIG_CGROUPS is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_RD_GZIP=y
-+CONFIG_RD_BZIP2=y
-+CONFIG_RD_LZMA=y
-+CONFIG_RD_LZO=y
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_HAVE_PERF_EVENTS=y
-+CONFIG_PERF_USE_VMALLOC=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
-+# CONFIG_PERF_EVENTS is not set
-+# CONFIG_PERF_COUNTERS is not set
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_PROFILING is not set
-+CONFIG_HAVE_OPROFILE=y
-+# CONFIG_KPROBES is not set
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-+CONFIG_HAVE_CLK=y
-+
-+#
-+# GCOV-based kernel profiling
-+#
-+# CONFIG_GCOV_KERNEL is not set
-+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBDAF=y
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_DEADLINE=y
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_DEADLINE=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="deadline"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-+CONFIG_FREEZER=y
-+
-+#
-+# System Type
-+#
-+CONFIG_MMU=y
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_VEXPRESS is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_BCMRING is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CNS3XXX is not set
-+# CONFIG_ARCH_GEMINI is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_STMP3XXX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_DOVE is not set
-+# CONFIG_ARCH_KIRKWOOD is not set
-+# CONFIG_ARCH_LOKI is not set
-+# CONFIG_ARCH_LPC32XX is not set
-+# CONFIG_ARCH_MV78XX0 is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_MMP is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_W90X900 is not set
-+# CONFIG_ARCH_NUC93X is not set
-+# CONFIG_ARCH_TEGRA is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_MSM is not set
-+# CONFIG_ARCH_SHMOBILE is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+CONFIG_ARCH_S3C2410=y
-+# CONFIG_ARCH_S3C64XX is not set
-+# CONFIG_ARCH_S5P64X0 is not set
-+# CONFIG_ARCH_S5P6442 is not set
-+# CONFIG_ARCH_S5PC100 is not set
-+# CONFIG_ARCH_S5PV210 is not set
-+# CONFIG_ARCH_S5PV310 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_TCC_926 is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_U300 is not set
-+# CONFIG_ARCH_U8500 is not set
-+# CONFIG_ARCH_NOMADIK is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+# CONFIG_PLAT_SPEAR is not set
-+CONFIG_PLAT_SAMSUNG=y
-+
-+#
-+# Boot options
-+#
-+# CONFIG_S3C_BOOT_WATCHDOG is not set
-+# CONFIG_S3C_BOOT_ERROR_RESET is not set
-+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-+CONFIG_S3C_LOWLEVEL_UART_PORT=-1
-+CONFIG_S3C_GPIO_CFG_S3C24XX=y
-+CONFIG_S3C_GPIO_PULL_DOWN=y
-+CONFIG_SAMSUNG_GPIO_EXTRA=64
-+CONFIG_S3C_GPIO_SPACE=0
-+CONFIG_S3C_ADC=y
-+CONFIG_S3C_DEV_USB_HOST=y
-+CONFIG_S3C_DEV_WDT=y
-+CONFIG_S3C_DEV_NAND=y
-+CONFIG_S3C_DMA=y
-+
-+#
-+# Power management
-+#
-+# CONFIG_SAMSUNG_PM_DEBUG is not set
-+# CONFIG_SAMSUNG_PM_CHECK is not set
-+CONFIG_PLAT_S3C24XX=y
-+CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-+CONFIG_CPU_LLSERIAL_S3C2440=y
-+CONFIG_S3C2410_CLOCK=y
-+CONFIG_S3C24XX_PWM=y
-+CONFIG_S3C24XX_GPIO_EXTRA=64
-+CONFIG_S3C24XX_GPIO_EXTRA64=y
-+CONFIG_S3C2410_DMA=y
-+# CONFIG_S3C2410_DMA_DEBUG is not set
-+
-+#
-+# S3C2400 Machines
-+#
-+CONFIG_CPU_S3C2410_DMA=y
-+CONFIG_S3C2410_PM=y
-+CONFIG_S3C2410_GPIO=y
-+
-+#
-+# S3C2410 Machines
-+#
-+# CONFIG_ARCH_SMDK2410 is not set
-+# CONFIG_ARCH_H1940 is not set
-+# CONFIG_MACH_N30 is not set
-+# CONFIG_ARCH_BAST is not set
-+# CONFIG_MACH_OTOM is not set
-+# CONFIG_MACH_AML_M5900 is not set
-+# CONFIG_MACH_TCT_HAMMER is not set
-+# CONFIG_MACH_VR1000 is not set
-+# CONFIG_MACH_QT2410 is not set
-+
-+#
-+# S3C2412 Machines
-+#
-+# CONFIG_MACH_JIVE is not set
-+# CONFIG_MACH_SMDK2413 is not set
-+# CONFIG_MACH_SMDK2412 is not set
-+# CONFIG_MACH_VSTMS is not set
-+
-+#
-+# S3C2416 Machines
-+#
-+# CONFIG_MACH_SMDK2416 is not set
-+CONFIG_CPU_S3C2442=y
-+CONFIG_CPU_S3C244X=y
-+
-+#
-+# S3C2440 and S3C2442 Machines
-+#
-+# CONFIG_MACH_ANUBIS is not set
-+CONFIG_MACH_NEO1973_GTA02=y
-+# CONFIG_MACH_OSIRIS is not set
-+# CONFIG_MACH_RX3715 is not set
-+# CONFIG_ARCH_S3C2440 is not set
-+# CONFIG_MACH_NEXCODER_2440 is not set
-+# CONFIG_SMDK2440_CPU2440 is not set
-+# CONFIG_SMDK2440_CPU2442 is not set
-+# CONFIG_MACH_AT2440EVB is not set
-+# CONFIG_MACH_MINI2440 is not set
-+# CONFIG_MACH_RX1950 is not set
-+
-+#
-+# S3C2443 Machines
-+#
-+# CONFIG_MACH_SMDK2443 is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_ARM920T=y
-+CONFIG_CPU_32v4T=y
-+CONFIG_CPU_ABRT_EV4T=y
-+CONFIG_CPU_PABRT_LEGACY=y
-+CONFIG_CPU_CACHE_V4WT=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+CONFIG_ARM_L1_CACHE_SHIFT=5
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_VMSPLIT_3G=y
-+# CONFIG_VMSPLIT_2G is not set
-+# CONFIG_VMSPLIT_1G is not set
-+CONFIG_PAGE_OFFSET=0xC0000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_HZ=200
-+CONFIG_AEABI=y
-+# CONFIG_OABI_COMPAT is not set
-+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-+# CONFIG_HIGHMEM is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_HAVE_MEMBLOCK=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=999999
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-+CONFIG_FORCE_MAX_ZONEORDER=11
-+CONFIG_ALIGNMENT_TRAP=y
-+# CONFIG_UACCESS_WITH_MEMCPY is not set
-+# CONFIG_SECCOMP is not set
-+# CONFIG_CC_STACKPROTECTOR is not set
-+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="unused -- bootloader passes ATAG list"
-+# CONFIG_CMDLINE_FORCE is not set
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+# CONFIG_AUTO_ZRELADDR is not set
-+
-+#
-+# CPU Power Management
-+#
-+# CONFIG_CPU_FREQ is not set
-+CONFIG_CPU_IDLE=y
-+CONFIG_CPU_IDLE_GOV_LADDER=y
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND_NVS=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+# CONFIG_APM_EMULATION is not set
-+# CONFIG_PM_RUNTIME is not set
-+CONFIG_PM_OPS=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-+# CONFIG_IP_PIMSM_V1 is not set
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+CONFIG_TCP_CONG_ADVANCED=y
-+# CONFIG_TCP_CONG_BIC is not set
-+# CONFIG_TCP_CONG_CUBIC is not set
-+CONFIG_TCP_CONG_WESTWOOD=y
-+# CONFIG_TCP_CONG_HTCP is not set
-+# CONFIG_TCP_CONG_HSTCP is not set
-+# CONFIG_TCP_CONG_HYBLA is not set
-+# CONFIG_TCP_CONG_VEGAS is not set
-+# CONFIG_TCP_CONG_SCALABLE is not set
-+# CONFIG_TCP_CONG_LP is not set
-+# CONFIG_TCP_CONG_VENO is not set
-+# CONFIG_TCP_CONG_YEAH is not set
-+# CONFIG_TCP_CONG_ILLINOIS is not set
-+CONFIG_DEFAULT_WESTWOOD=y
-+# CONFIG_DEFAULT_RENO is not set
-+CONFIG_DEFAULT_TCP_CONG="westwood"
-+CONFIG_TCP_MD5SIG=y
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
-+CONFIG_STP=y
-+CONFIG_BRIDGE=y
-+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=y
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
-+CONFIG_NET_SCHED=y
-+
-+#
-+# Queueing/Scheduling
-+#
-+# CONFIG_NET_SCH_CBQ is not set
-+# CONFIG_NET_SCH_HTB is not set
-+# CONFIG_NET_SCH_HFSC is not set
-+# CONFIG_NET_SCH_PRIO is not set
-+# CONFIG_NET_SCH_MULTIQ is not set
-+# CONFIG_NET_SCH_RED is not set
-+# CONFIG_NET_SCH_SFQ is not set
-+# CONFIG_NET_SCH_TEQL is not set
-+# CONFIG_NET_SCH_TBF is not set
-+# CONFIG_NET_SCH_GRED is not set
-+# CONFIG_NET_SCH_DSMARK is not set
-+# CONFIG_NET_SCH_NETEM is not set
-+# CONFIG_NET_SCH_DRR is not set
-+
-+#
-+# Classification
-+#
-+CONFIG_NET_CLS=y
-+CONFIG_NET_CLS_BASIC=y
-+# CONFIG_NET_CLS_TCINDEX is not set
-+# CONFIG_NET_CLS_ROUTE4 is not set
-+# CONFIG_NET_CLS_FW is not set
-+# CONFIG_NET_CLS_U32 is not set
-+# CONFIG_NET_CLS_RSVP is not set
-+# CONFIG_NET_CLS_RSVP6 is not set
-+# CONFIG_NET_CLS_FLOW is not set
-+# CONFIG_NET_EMATCH is not set
-+# CONFIG_NET_CLS_ACT is not set
-+CONFIG_NET_SCH_FIFO=y
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+CONFIG_BT=y
-+CONFIG_BT_L2CAP=y
-+CONFIG_BT_SCO=y
-+CONFIG_BT_RFCOMM=y
-+CONFIG_BT_RFCOMM_TTY=y
-+CONFIG_BT_BNEP=y
-+CONFIG_BT_BNEP_MC_FILTER=y
-+CONFIG_BT_BNEP_PROTO_FILTER=y
-+CONFIG_BT_HIDP=y
-+
-+#
-+# Bluetooth device drivers
-+#
-+CONFIG_BT_HCIBTUSB=y
-+# CONFIG_BT_HCIBTSDIO is not set
-+# CONFIG_BT_HCIUART is not set
-+# CONFIG_BT_HCIBCM203X is not set
-+# CONFIG_BT_HCIBPA10X is not set
-+# CONFIG_BT_HCIBFUSB is not set
-+# CONFIG_BT_HCIVHCI is not set
-+# CONFIG_BT_MRVL is not set
-+# CONFIG_BT_ATH3K is not set
-+# CONFIG_AF_RXRPC is not set
-+CONFIG_FIB_RULES=y
-+CONFIG_WIRELESS=y
-+CONFIG_WIRELESS_EXT=y
-+CONFIG_WEXT_CORE=y
-+CONFIG_WEXT_PROC=y
-+CONFIG_WEXT_PRIV=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT_SYSFS=y
-+# CONFIG_LIB80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_FIRMWARE_IN_KERNEL is not set
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+CONFIG_MTD_ROM=y
-+CONFIG_MTD_ABSENT=y
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+# CONFIG_MTD_PHYSMAP_COMPAT is not set
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SST25L is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND_ECC=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_VERIFY_WRITE=y
-+# CONFIG_MTD_SM_COMMON is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+# CONFIG_MTD_NAND_GPIO is not set
-+CONFIG_MTD_NAND_IDS=y
-+CONFIG_MTD_NAND_S3C2410=y
-+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-+CONFIG_MTD_NAND_S3C2410_HWECC=y
-+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+# CONFIG_BLK_DEV_LOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_MG_DISK is not set
-+# CONFIG_BLK_DEV_RBD is not set
-+# CONFIG_MISC_DEVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+CONFIG_SCSI_MOD=y
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+# CONFIG_VETH is not set
-+CONFIG_MII=y
-+# CONFIG_PHYLIB is not set
-+# CONFIG_NET_ETHERNET is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+CONFIG_WLAN=y
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
-+# CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+CONFIG_KEYBOARD_GPIO=y
-+# CONFIG_KEYBOARD_GPIO_POLLED is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MATRIX is not set
-+# CONFIG_KEYBOARD_LM8323 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_ADS7846 is not set
-+# CONFIG_TOUCHSCREEN_AD7877 is not set
-+# CONFIG_TOUCHSCREEN_AD7879 is not set
-+# CONFIG_TOUCHSCREEN_BU21013 is not set
-+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-+# CONFIG_TOUCHSCREEN_EETI is not set
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+CONFIG_TOUCHSCREEN_S3C2410=y
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-+# CONFIG_TOUCHSCREEN_MCS5000 is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_INEXIO is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_QT602240 is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-+# CONFIG_TOUCHSCREEN_TSC2007 is not set
-+# CONFIG_TOUCHSCREEN_W90X900 is not set
-+# CONFIG_TOUCHSCREEN_TPS6507X is not set
-+CONFIG_INPUT_MISC=y
-+# CONFIG_INPUT_AD714X is not set
-+# CONFIG_INPUT_ATI_REMOTE is not set
-+# CONFIG_INPUT_ATI_REMOTE2 is not set
-+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-+# CONFIG_INPUT_POWERMATE is not set
-+# CONFIG_INPUT_YEALINK is not set
-+# CONFIG_INPUT_CM109 is not set
-+# CONFIG_INPUT_UINPUT is not set
-+CONFIG_INPUT_PCF50633_PMU=y
-+# CONFIG_INPUT_PCF8574 is not set
-+# CONFIG_INPUT_PWM_BEEPER is not set
-+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-+# CONFIG_INPUT_ADXL34X is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+# CONFIG_SERIO_SERPORT is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+CONFIG_VT_HW_CONSOLE_BINDING=y
-+# CONFIG_DEVKMEM is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_SAMSUNG=y
-+CONFIG_SERIAL_SAMSUNG_UARTS=3
-+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-+CONFIG_SERIAL_S3C2440=y
-+# CONFIG_SERIAL_MAX3100 is not set
-+# CONFIG_SERIAL_MAX3107 is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+# CONFIG_I2C_COMPAT is not set
-+CONFIG_I2C_CHARDEV=y
-+# CONFIG_I2C_MUX is not set
-+# CONFIG_I2C_HELPER_AUTO is not set
-+# CONFIG_I2C_SMBUS is not set
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+# CONFIG_I2C_DESIGNWARE is not set
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+CONFIG_HAVE_S3C2410_I2C=y
-+CONFIG_I2C_S3C2410=y
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_BITBANG=y
-+CONFIG_SPI_GPIO=y
-+CONFIG_SPI_S3C24XX=y
-+# CONFIG_SPI_S3C24XX_FIQ is not set
-+CONFIG_SPI_S3C24XX_GPIO=y
-+# CONFIG_SPI_XILINX is not set
-+# CONFIG_SPI_DESIGNWARE is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+CONFIG_GPIO_SYSFS=y
-+
-+#
-+# Memory mapped GPIO expanders:
-+#
-+# CONFIG_GPIO_BASIC_MMIO is not set
-+CONFIG_GPIO_GLAMO=y
-+# CONFIG_GPIO_IT8761E is not set
-+# CONFIG_GPIO_VX855 is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7300 is not set
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+# CONFIG_GPIO_SX150X is not set
-+# CONFIG_GPIO_ADP5588 is not set
-+CONFIG_GPIO_PCF50633=y
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_GPIO_MC33880 is not set
-+# CONFIG_GPIO_74X164 is not set
-+
-+#
-+# AC97 GPIO expanders:
-+#
-+
-+#
-+# MODULbus GPIO expanders:
-+#
-+# CONFIG_W1 is not set
-+CONFIG_POWER_SUPPLY=y
-+# CONFIG_POWER_SUPPLY_DEBUG is not set
-+# CONFIG_PDA_POWER is not set
-+# CONFIG_TEST_POWER is not set
-+# CONFIG_BATTERY_DS2782 is not set
-+# CONFIG_BATTERY_BQ20Z75 is not set
-+CONFIG_BATTERY_BQ27x00=y
-+CONFIG_BATTERY_BQ27X00_I2C=y
-+CONFIG_BATTERY_BQ27X00_PLATFORM=y
-+# CONFIG_BATTERY_MAX17040 is not set
-+# CONFIG_BATTERY_S3C_ADC is not set
-+CONFIG_CHARGER_PCF50633=y
-+# CONFIG_BATTERY_PLATFORM is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_S3C2410_WATCHDOG=y
-+# CONFIG_MAX63XX_WATCHDOG is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+CONFIG_MFD_SUPPORT=y
-+CONFIG_MFD_CORE=y
-+# CONFIG_MFD_88PM860X is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_EGPIO is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_HTC_I2CPLD is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_TPS6507X is not set
-+# CONFIG_TWL4030_CORE is not set
-+# CONFIG_MFD_STMPE is not set
-+# CONFIG_MFD_TC35892 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_MFD_T7L66XB is not set
-+# CONFIG_MFD_TC6387XB is not set
-+# CONFIG_MFD_TC6393XB is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
-+# CONFIG_MFD_MAX8925 is not set
-+# CONFIG_MFD_MAX8998 is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM831X_I2C is not set
-+# CONFIG_MFD_WM831X_SPI is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_WM8994 is not set
-+CONFIG_MFD_PCF50633=y
-+# CONFIG_MFD_MC13XXX is not set
-+CONFIG_PCF50633_ADC=y
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_EZX_PCAP is not set
-+CONFIG_MFD_GLAMO=y
-+# CONFIG_MFD_TPS6586X is not set
-+CONFIG_REGULATOR=y
-+# CONFIG_REGULATOR_DEBUG is not set
-+# CONFIG_REGULATOR_DUMMY is not set
-+CONFIG_REGULATOR_FIXED_VOLTAGE=y
-+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-+# CONFIG_REGULATOR_BQ24022 is not set
-+# CONFIG_REGULATOR_MAX1586 is not set
-+# CONFIG_REGULATOR_MAX8649 is not set
-+# CONFIG_REGULATOR_MAX8660 is not set
-+# CONFIG_REGULATOR_MAX8952 is not set
-+CONFIG_REGULATOR_PCF50633=y
-+# CONFIG_REGULATOR_LP3971 is not set
-+# CONFIG_REGULATOR_LP3972 is not set
-+# CONFIG_REGULATOR_TPS65023 is not set
-+# CONFIG_REGULATOR_TPS6507X is not set
-+# CONFIG_REGULATOR_ISL6271A is not set
-+# CONFIG_REGULATOR_AD5398 is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_TMIO is not set
-+# CONFIG_FB_S3C2410 is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_FB_METRONOME is not set
-+# CONFIG_FB_MB862XX is not set
-+# CONFIG_FB_BROADSHEET is not set
-+CONFIG_FB_GLAMO=y
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+# CONFIG_LCD_L4F00242T03 is not set
-+# CONFIG_LCD_LMS283GF05 is not set
-+# CONFIG_LCD_LTV350QV is not set
-+# CONFIG_LCD_TDO24M is not set
-+# CONFIG_LCD_VGG2432A4 is not set
-+# CONFIG_LCD_PLATFORM is not set
-+# CONFIG_LCD_S6E63M0 is not set
-+CONFIG_LCD_JBT6K74=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+# CONFIG_BACKLIGHT_GENERIC is not set
-+# CONFIG_BACKLIGHT_PWM is not set
-+# CONFIG_BACKLIGHT_ADP8860 is not set
-+CONFIG_BACKLIGHT_PCF50633=y
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+# CONFIG_FONT_8x16 is not set
-+CONFIG_FONT_6x11=y
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+# CONFIG_FONT_MINI_4x6 is not set
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_10x18 is not set
-+CONFIG_LOGO=y
-+# CONFIG_LOGO_LINUX_MONO is not set
-+# CONFIG_LOGO_LINUX_VGA16 is not set
-+# CONFIG_LOGO_LINUX_CLUT224 is not set
-+CONFIG_SOUND=y
-+CONFIG_SOUND_OSS_CORE=y
-+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
-+CONFIG_SND_JACK=y
-+CONFIG_SND_SEQUENCER=m
-+CONFIG_SND_SEQ_DUMMY=m
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+CONFIG_SND_SEQUENCER_OSS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_RAWMIDI_SEQ is not set
-+# CONFIG_SND_OPL3_LIB_SEQ is not set
-+# CONFIG_SND_OPL4_LIB_SEQ is not set
-+# CONFIG_SND_SBAWE_SEQ is not set
-+# CONFIG_SND_EMU10K1_SEQ is not set
-+# CONFIG_SND_DRIVERS is not set
-+# CONFIG_SND_ARM is not set
-+# CONFIG_SND_SPI is not set
-+# CONFIG_SND_USB is not set
-+CONFIG_SND_SOC=y
-+CONFIG_SND_S3C24XX_SOC=y
-+CONFIG_SND_S3C24XX_SOC_I2S=y
-+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=y
-+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-+# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
-+# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
-+# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
-+CONFIG_SND_SOC_I2C_AND_SPI=y
-+# CONFIG_SND_SOC_ALL_CODECS is not set
-+CONFIG_SND_SOC_WM8753=y
-+CONFIG_SND_SOC_LM4857=y
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_HID_PID is not set
-+# CONFIG_USB_HIDDEV is not set
-+
-+#
-+# Special HID drivers
-+#
-+# CONFIG_HID_3M_PCT is not set
-+CONFIG_HID_A4TECH=y
-+# CONFIG_HID_ACRUX_FF is not set
-+CONFIG_HID_APPLE=y
-+CONFIG_HID_BELKIN=y
-+# CONFIG_HID_CANDO is not set
-+CONFIG_HID_CHERRY=y
-+CONFIG_HID_CHICONY=y
-+# CONFIG_HID_PRODIKEYS is not set
-+CONFIG_HID_CYPRESS=y
-+CONFIG_HID_DRAGONRISE=y
-+# CONFIG_DRAGONRISE_FF is not set
-+# CONFIG_HID_EGALAX is not set
-+# CONFIG_HID_ELECOM is not set
-+CONFIG_HID_EZKEY=y
-+CONFIG_HID_KYE=y
-+# CONFIG_HID_UCLOGIC is not set
-+# CONFIG_HID_WALTOP is not set
-+CONFIG_HID_GYRATION=y
-+CONFIG_HID_TWINHAN=y
-+CONFIG_HID_KENSINGTON=y
-+CONFIG_HID_LOGITECH=y
-+# CONFIG_LOGITECH_FF is not set
-+# CONFIG_LOGIRUMBLEPAD2_FF is not set
-+# CONFIG_LOGIG940_FF is not set
-+# CONFIG_LOGIWII_FF is not set
-+# CONFIG_HID_MAGICMOUSE is not set
-+CONFIG_HID_MICROSOFT=y
-+# CONFIG_HID_MOSART is not set
-+CONFIG_HID_MONTEREY=y
-+CONFIG_HID_NTRIG=y
-+CONFIG_HID_ORTEK=y
-+CONFIG_HID_PANTHERLORD=y
-+# CONFIG_PANTHERLORD_FF is not set
-+CONFIG_HID_PETALYNX=y
-+# CONFIG_HID_PICOLCD is not set
-+# CONFIG_HID_QUANTA is not set
-+# CONFIG_HID_ROCCAT is not set
-+# CONFIG_HID_ROCCAT_KONE is not set
-+# CONFIG_HID_ROCCAT_PYRA is not set
-+CONFIG_HID_SAMSUNG=y
-+CONFIG_HID_SONY=y
-+# CONFIG_HID_STANTUM is not set
-+CONFIG_HID_SUNPLUS=y
-+CONFIG_HID_GREENASIA=y
-+# CONFIG_GREENASIA_FF is not set
-+CONFIG_HID_SMARTJOYPLUS=y
-+# CONFIG_SMARTJOYPLUS_FF is not set
-+CONFIG_HID_TOPSEED=y
-+CONFIG_HID_THRUSTMASTER=y
-+# CONFIG_THRUSTMASTER_FF is not set
-+# CONFIG_HID_WACOM is not set
-+CONFIG_HID_ZEROPLUS=y
-+# CONFIG_ZEROPLUS_FF is not set
-+# CONFIG_HID_ZYDACRON is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+# CONFIG_USB_DEVICEFS is not set
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_MON is not set
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-+#
-+
-+#
-+# also be needed; see USB_STORAGE Help for more info
-+#
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_YUREX is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=500
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_R8A66597 is not set
-+CONFIG_USB_GADGET_S3C2410=y
-+CONFIG_USB_S3C2410=y
-+# CONFIG_USB_S3C2410_DEBUG is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+# CONFIG_USB_GADGET_DUALSPEED is not set
-+# CONFIG_USB_ZERO is not set
-+# CONFIG_USB_AUDIO is not set
-+CONFIG_USB_ETH=y
-+CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_ETH_EEM is not set
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FUNCTIONFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_MASS_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+# CONFIG_USB_G_MULTI is not set
-+# CONFIG_USB_G_HID is not set
-+# CONFIG_USB_G_DBGP is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+# CONFIG_USB_GPIO_VBUS is not set
-+# CONFIG_USB_ULPI is not set
-+# CONFIG_NOP_USB_XCEIV is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_UNSAFE_RESUME=y
-+
-+#
-+# MMC/SD/SDIO Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_MINORS=8
-+# CONFIG_MMC_BLOCK_BOUNCE is not set
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD/SDIO Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+# CONFIG_MMC_SPI is not set
-+CONFIG_MMC_S3C=y
-+# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
-+CONFIG_MMC_S3C_PIO=y
-+# CONFIG_MMC_S3C_DMA is not set
-+# CONFIG_MMC_S3C_PIODMA is not set
-+CONFIG_MMC_GLAMO=y
-+# CONFIG_MMC_USHC is not set
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+# CONFIG_LEDS_S3C24XX is not set
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=y
-+CONFIG_LEDS_GPIO_PLATFORM=y
-+# CONFIG_LEDS_LP3944 is not set
-+# CONFIG_LEDS_LP5521 is not set
-+# CONFIG_LEDS_LP5523 is not set
-+# CONFIG_LEDS_PCA955X is not set
-+# CONFIG_LEDS_DAC124S085 is not set
-+CONFIG_LEDS_PWM=y
-+# CONFIG_LEDS_REGULATOR is not set
-+# CONFIG_LEDS_BD2802 is not set
-+# CONFIG_LEDS_LT3593 is not set
-+CONFIG_LEDS_TRIGGERS=y
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-+# CONFIG_LEDS_TRIGGER_GPIO is not set
-+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-+
-+#
-+# iptables trigger is under Netfilter config (LED target)
-+#
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_DS3232 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_ISL12022 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_BQ32K is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+# CONFIG_RTC_DRV_RX8025 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_DS1390 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_DS3234 is not set
-+# CONFIG_RTC_DRV_PCF2123 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_MSM6242 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_RP5C01 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+CONFIG_RTC_DRV_PCF50633=y
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_DRV_S3C is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_AUXDISPLAY is not set
-+# CONFIG_UIO is not set
-+CONFIG_STAGING=y
-+# CONFIG_STAGING_EXCLUDE_BUILD is not set
-+# CONFIG_USB_IP_COMMON is not set
-+# CONFIG_ECHO is not set
-+# CONFIG_BRCM80211 is not set
-+# CONFIG_RT2870 is not set
-+# CONFIG_COMEDI is not set
-+# CONFIG_ASUS_OLED is not set
-+# CONFIG_R8712U is not set
-+# CONFIG_TRANZPORT is not set
-+# CONFIG_POHMELFS is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_LINE6_USB is not set
-+# CONFIG_VT6656 is not set
-+# CONFIG_FB_UDL is not set
-+# CONFIG_IIO is not set
-+# CONFIG_ZRAM is not set
-+# CONFIG_BATMAN_ADV is not set
-+# CONFIG_FB_SM7XX is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
-+# CONFIG_ADIS16255 is not set
-+# CONFIG_SMB_FS is not set
-+CONFIG_MACH_NO_WESTBRIDGE=y
-+# CONFIG_ATH6K_LEGACY is not set
-+# CONFIG_BCM_WIMAX is not set
-+# CONFIG_FT1000 is not set
-+
-+#
-+# Speakup console speech
-+#
-+# CONFIG_SPEAKUP is not set
-+CONFIG_AR6000_WLAN=y
-+# CONFIG_AR6000_WLAN_DEBUG is not set
-+# CONFIG_AR6000_WLAN_RESET is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_QUOTACTL is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+# CONFIG_MSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+CONFIG_JFFS2_SUMMARY=y
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+# CONFIG_NETWORK_FILESYSTEMS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+CONFIG_OSF_PARTITION=y
-+CONFIG_AMIGA_PARTITION=y
-+CONFIG_ATARI_PARTITION=y
-+CONFIG_MAC_PARTITION=y
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_BSD_DISKLABEL=y
-+CONFIG_MINIX_SUBPARTITION=y
-+CONFIG_SOLARIS_X86_PARTITION=y
-+CONFIG_UNIXWARE_DISKLABEL=y
-+CONFIG_LDM_PARTITION=y
-+CONFIG_LDM_DEBUG=y
-+CONFIG_SGI_PARTITION=y
-+CONFIG_ULTRIX_PARTITION=y
-+CONFIG_SUN_PARTITION=y
-+CONFIG_KARMA_PARTITION=y
-+CONFIG_EFI_PARTITION=y
-+CONFIG_SYSV68_PARTITION=y
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+# CONFIG_NLS_ISO8859_1 is not set
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_WARN_DEPRECATED is not set
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+CONFIG_STRIP_ASM_SYMS=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_MEMORY_INIT=y
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_LKDTM is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+CONFIG_HAVE_FUNCTION_TRACER=y
-+CONFIG_HAVE_DYNAMIC_FTRACE=y
-+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-+CONFIG_TRACING_SUPPORT=y
-+# CONFIG_FTRACE is not set
-+# CONFIG_DYNAMIC_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_HAVE_ARCH_KGDB=y
-+# CONFIG_STRICT_DEVMEM is not set
-+# CONFIG_ARM_UNWIND is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_OC_ETM is not set
-+CONFIG_DEBUG_S3C_UART=2
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_PCOMP=y
-+CONFIG_CRYPTO_PCOMP2=y
-+# CONFIG_CRYPTO_MANAGER is not set
-+# CONFIG_CRYPTO_MANAGER2 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+# CONFIG_CRYPTO_CBC is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_GHASH is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+CONFIG_CRYPTO_ZLIB=y
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+# CONFIG_CRYPTO_HW is not set
-+# CONFIG_BINARY_PRINTF is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+CONFIG_CRC_T10DIF=y
-+CONFIG_CRC_ITU_T=y
-+CONFIG_CRC32=y
-+CONFIG_CRC7=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_DECOMPRESS_GZIP=y
-+CONFIG_DECOMPRESS_BZIP2=y
-+CONFIG_DECOMPRESS_LZMA=y
-+CONFIG_DECOMPRESS_LZO=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
-diff --git a/arch/arm/configs/gta02_drm_defconfig b/arch/arm/configs/gta02_drm_defconfig
-new file mode 100644
-index 0000000..d771962
---- /dev/null
-+++ b/arch/arm/configs/gta02_drm_defconfig
-@@ -0,0 +1,1943 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux/arm 2.6.37 Kernel Configuration
-+# Wed Jan 5 19:56:16 2011
-+#
-+CONFIG_ARM=y
-+CONFIG_HAVE_PWM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_ARCH_USES_GETTIMEOFFSET=y
-+CONFIG_HAVE_PROC_CPU=y
-+CONFIG_NO_IOPORT=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_ARCH_HAS_CPUFREQ=y
-+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_NEED_DMA_MAP_STATE=y
-+CONFIG_FIQ=y
-+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+CONFIG_CONSTRUCTORS=y
-+CONFIG_HAVE_IRQ_WORK=y
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_CROSS_COMPILE=""
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_HAVE_KERNEL_GZIP=y
-+CONFIG_HAVE_KERNEL_LZMA=y
-+CONFIG_HAVE_KERNEL_LZO=y
-+CONFIG_KERNEL_GZIP=y
-+# CONFIG_KERNEL_LZMA is not set
-+# CONFIG_KERNEL_LZO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_HAVE_GENERIC_HARDIRQS is not set
-+# CONFIG_SPARSE_IRQ is not set
-+
-+#
-+# RCU Subsystem
-+#
-+CONFIG_TINY_RCU=y
-+# CONFIG_PREEMPT_RCU is not set
-+# CONFIG_TREE_RCU_TRACE is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=18
-+# CONFIG_CGROUPS is not set
-+CONFIG_NAMESPACES=y
-+# CONFIG_UTS_NS is not set
-+# CONFIG_IPC_NS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
-+# CONFIG_NET_NS is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_RD_GZIP=y
-+CONFIG_RD_BZIP2=y
-+CONFIG_RD_LZMA=y
-+CONFIG_RD_LZO=y
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-+CONFIG_SYSCTL=y
-+CONFIG_ANON_INODES=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_HAVE_PERF_EVENTS=y
-+CONFIG_PERF_USE_VMALLOC=y
-+
-+#
-+# Kernel Performance Events And Counters
-+#
-+# CONFIG_PERF_EVENTS is not set
-+# CONFIG_PERF_COUNTERS is not set
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_PROFILING is not set
-+CONFIG_HAVE_OPROFILE=y
-+# CONFIG_KPROBES is not set
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-+CONFIG_HAVE_CLK=y
-+
-+#
-+# GCOV-based kernel profiling
-+#
-+# CONFIG_GCOV_KERNEL is not set
-+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_BLOCK=y
-+CONFIG_LBDAF=y
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_DEADLINE=y
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_DEADLINE=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="deadline"
-+# CONFIG_INLINE_SPIN_TRYLOCK is not set
-+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK is not set
-+# CONFIG_INLINE_SPIN_LOCK_BH is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_SPIN_UNLOCK=y
-+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_READ_TRYLOCK is not set
-+# CONFIG_INLINE_READ_LOCK is not set
-+# CONFIG_INLINE_READ_LOCK_BH is not set
-+# CONFIG_INLINE_READ_LOCK_IRQ is not set
-+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_READ_UNLOCK=y
-+# CONFIG_INLINE_READ_UNLOCK_BH is not set
-+CONFIG_INLINE_READ_UNLOCK_IRQ=y
-+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-+# CONFIG_INLINE_WRITE_TRYLOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK is not set
-+# CONFIG_INLINE_WRITE_LOCK_BH is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-+CONFIG_INLINE_WRITE_UNLOCK=y
-+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-+CONFIG_FREEZER=y
-+
-+#
-+# System Type
-+#
-+CONFIG_MMU=y
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_VEXPRESS is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_BCMRING is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CNS3XXX is not set
-+# CONFIG_ARCH_GEMINI is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_STMP3XXX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_DOVE is not set
-+# CONFIG_ARCH_KIRKWOOD is not set
-+# CONFIG_ARCH_LOKI is not set
-+# CONFIG_ARCH_LPC32XX is not set
-+# CONFIG_ARCH_MV78XX0 is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_MMP is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_W90X900 is not set
-+# CONFIG_ARCH_NUC93X is not set
-+# CONFIG_ARCH_TEGRA is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_MSM is not set
-+# CONFIG_ARCH_SHMOBILE is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+CONFIG_ARCH_S3C2410=y
-+# CONFIG_ARCH_S3C64XX is not set
-+# CONFIG_ARCH_S5P64X0 is not set
-+# CONFIG_ARCH_S5P6442 is not set
-+# CONFIG_ARCH_S5PC100 is not set
-+# CONFIG_ARCH_S5PV210 is not set
-+# CONFIG_ARCH_S5PV310 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_TCC_926 is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_U300 is not set
-+# CONFIG_ARCH_U8500 is not set
-+# CONFIG_ARCH_NOMADIK is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+# CONFIG_ARCH_OMAP is not set
-+# CONFIG_PLAT_SPEAR is not set
-+CONFIG_PLAT_SAMSUNG=y
-+
-+#
-+# Boot options
-+#
-+# CONFIG_S3C_BOOT_WATCHDOG is not set
-+# CONFIG_S3C_BOOT_ERROR_RESET is not set
-+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-+CONFIG_S3C_LOWLEVEL_UART_PORT=-1
-+CONFIG_S3C_GPIO_CFG_S3C24XX=y
-+CONFIG_S3C_GPIO_PULL_DOWN=y
-+CONFIG_SAMSUNG_GPIO_EXTRA=64
-+CONFIG_S3C_GPIO_SPACE=0
-+CONFIG_S3C_ADC=y
-+CONFIG_S3C_DEV_USB_HOST=y
-+CONFIG_S3C_DEV_WDT=y
-+CONFIG_S3C_DEV_NAND=y
-+CONFIG_S3C_DMA=y
-+
-+#
-+# Power management
-+#
-+# CONFIG_SAMSUNG_PM_DEBUG is not set
-+# CONFIG_SAMSUNG_PM_CHECK is not set
-+CONFIG_PLAT_S3C24XX=y
-+CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-+CONFIG_CPU_LLSERIAL_S3C2440=y
-+CONFIG_S3C2410_CLOCK=y
-+CONFIG_S3C24XX_PWM=y
-+CONFIG_S3C24XX_GPIO_EXTRA=64
-+CONFIG_S3C24XX_GPIO_EXTRA64=y
-+CONFIG_S3C2410_DMA=y
-+# CONFIG_S3C2410_DMA_DEBUG is not set
-+
-+#
-+# S3C2400 Machines
-+#
-+CONFIG_CPU_S3C2410_DMA=y
-+CONFIG_S3C2410_PM=y
-+CONFIG_S3C2410_GPIO=y
-+
-+#
-+# S3C2410 Machines
-+#
-+# CONFIG_ARCH_SMDK2410 is not set
-+# CONFIG_ARCH_H1940 is not set
-+# CONFIG_MACH_N30 is not set
-+# CONFIG_ARCH_BAST is not set
-+# CONFIG_MACH_OTOM is not set
-+# CONFIG_MACH_AML_M5900 is not set
-+# CONFIG_MACH_TCT_HAMMER is not set
-+# CONFIG_MACH_VR1000 is not set
-+# CONFIG_MACH_QT2410 is not set
-+
-+#
-+# S3C2412 Machines
-+#
-+# CONFIG_MACH_JIVE is not set
-+# CONFIG_MACH_SMDK2413 is not set
-+# CONFIG_MACH_SMDK2412 is not set
-+# CONFIG_MACH_VSTMS is not set
-+
-+#
-+# S3C2416 Machines
-+#
-+# CONFIG_MACH_SMDK2416 is not set
-+CONFIG_CPU_S3C2442=y
-+CONFIG_CPU_S3C244X=y
-+
-+#
-+# S3C2440 and S3C2442 Machines
-+#
-+# CONFIG_MACH_ANUBIS is not set
-+CONFIG_MACH_NEO1973_GTA02=y
-+# CONFIG_MACH_OSIRIS is not set
-+# CONFIG_MACH_RX3715 is not set
-+# CONFIG_ARCH_S3C2440 is not set
-+# CONFIG_MACH_NEXCODER_2440 is not set
-+# CONFIG_SMDK2440_CPU2440 is not set
-+# CONFIG_SMDK2440_CPU2442 is not set
-+# CONFIG_MACH_AT2440EVB is not set
-+# CONFIG_MACH_MINI2440 is not set
-+# CONFIG_MACH_RX1950 is not set
-+
-+#
-+# S3C2443 Machines
-+#
-+# CONFIG_MACH_SMDK2443 is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_ARM920T=y
-+CONFIG_CPU_32v4T=y
-+CONFIG_CPU_ABRT_EV4T=y
-+CONFIG_CPU_PABRT_LEGACY=y
-+CONFIG_CPU_CACHE_V4WT=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+CONFIG_ARM_L1_CACHE_SHIFT=5
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_VMSPLIT_3G=y
-+# CONFIG_VMSPLIT_2G is not set
-+# CONFIG_VMSPLIT_1G is not set
-+CONFIG_PAGE_OFFSET=0xC0000000
-+CONFIG_PREEMPT_NONE=y
-+# CONFIG_PREEMPT_VOLUNTARY is not set
-+# CONFIG_PREEMPT is not set
-+CONFIG_HZ=200
-+CONFIG_AEABI=y
-+# CONFIG_OABI_COMPAT is not set
-+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-+# CONFIG_HIGHMEM is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_HAVE_MEMBLOCK=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=999999
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+# CONFIG_KSM is not set
-+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-+CONFIG_NEED_PER_CPU_KM=y
-+CONFIG_FORCE_MAX_ZONEORDER=11
-+CONFIG_ALIGNMENT_TRAP=y
-+# CONFIG_UACCESS_WITH_MEMCPY is not set
-+# CONFIG_SECCOMP is not set
-+# CONFIG_CC_STACKPROTECTOR is not set
-+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="unused -- bootloader passes ATAG list"
-+# CONFIG_CMDLINE_FORCE is not set
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+# CONFIG_AUTO_ZRELADDR is not set
-+
-+#
-+# CPU Power Management
-+#
-+# CONFIG_CPU_FREQ is not set
-+CONFIG_CPU_IDLE=y
-+CONFIG_CPU_IDLE_GOV_LADDER=y
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND_NVS=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+# CONFIG_APM_EMULATION is not set
-+# CONFIG_PM_RUNTIME is not set
-+CONFIG_PM_OPS=y
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_ASK_IP_FIB_HASH=y
-+# CONFIG_IP_FIB_TRIE is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+# CONFIG_IP_ROUTE_MULTIPATH is not set
-+# CONFIG_IP_ROUTE_VERBOSE is not set
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE_DEMUX is not set
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-+# CONFIG_IP_PIMSM_V1 is not set
-+# CONFIG_IP_PIMSM_V2 is not set
-+# CONFIG_ARPD is not set
-+CONFIG_SYN_COOKIES=y
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+CONFIG_TCP_CONG_ADVANCED=y
-+# CONFIG_TCP_CONG_BIC is not set
-+# CONFIG_TCP_CONG_CUBIC is not set
-+CONFIG_TCP_CONG_WESTWOOD=y
-+# CONFIG_TCP_CONG_HTCP is not set
-+# CONFIG_TCP_CONG_HSTCP is not set
-+# CONFIG_TCP_CONG_HYBLA is not set
-+# CONFIG_TCP_CONG_VEGAS is not set
-+# CONFIG_TCP_CONG_SCALABLE is not set
-+# CONFIG_TCP_CONG_LP is not set
-+# CONFIG_TCP_CONG_VENO is not set
-+# CONFIG_TCP_CONG_YEAH is not set
-+# CONFIG_TCP_CONG_ILLINOIS is not set
-+CONFIG_DEFAULT_WESTWOOD=y
-+# CONFIG_DEFAULT_RENO is not set
-+CONFIG_DEFAULT_TCP_CONG="westwood"
-+CONFIG_TCP_MD5SIG=y
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_RDS is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_L2TP is not set
-+CONFIG_STP=y
-+CONFIG_BRIDGE=y
-+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+CONFIG_LLC=y
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_PHONET is not set
-+# CONFIG_IEEE802154 is not set
-+CONFIG_NET_SCHED=y
-+
-+#
-+# Queueing/Scheduling
-+#
-+# CONFIG_NET_SCH_CBQ is not set
-+# CONFIG_NET_SCH_HTB is not set
-+# CONFIG_NET_SCH_HFSC is not set
-+# CONFIG_NET_SCH_PRIO is not set
-+# CONFIG_NET_SCH_MULTIQ is not set
-+# CONFIG_NET_SCH_RED is not set
-+# CONFIG_NET_SCH_SFQ is not set
-+# CONFIG_NET_SCH_TEQL is not set
-+# CONFIG_NET_SCH_TBF is not set
-+# CONFIG_NET_SCH_GRED is not set
-+# CONFIG_NET_SCH_DSMARK is not set
-+# CONFIG_NET_SCH_NETEM is not set
-+# CONFIG_NET_SCH_DRR is not set
-+
-+#
-+# Classification
-+#
-+CONFIG_NET_CLS=y
-+CONFIG_NET_CLS_BASIC=y
-+# CONFIG_NET_CLS_TCINDEX is not set
-+# CONFIG_NET_CLS_ROUTE4 is not set
-+# CONFIG_NET_CLS_FW is not set
-+# CONFIG_NET_CLS_U32 is not set
-+# CONFIG_NET_CLS_RSVP is not set
-+# CONFIG_NET_CLS_RSVP6 is not set
-+# CONFIG_NET_CLS_FLOW is not set
-+# CONFIG_NET_EMATCH is not set
-+# CONFIG_NET_CLS_ACT is not set
-+CONFIG_NET_SCH_FIFO=y
-+# CONFIG_DCB is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+CONFIG_BT=y
-+CONFIG_BT_L2CAP=y
-+CONFIG_BT_SCO=y
-+CONFIG_BT_RFCOMM=y
-+CONFIG_BT_RFCOMM_TTY=y
-+CONFIG_BT_BNEP=y
-+CONFIG_BT_BNEP_MC_FILTER=y
-+CONFIG_BT_BNEP_PROTO_FILTER=y
-+CONFIG_BT_HIDP=y
-+
-+#
-+# Bluetooth device drivers
-+#
-+CONFIG_BT_HCIBTUSB=y
-+# CONFIG_BT_HCIBTSDIO is not set
-+# CONFIG_BT_HCIUART is not set
-+# CONFIG_BT_HCIBCM203X is not set
-+# CONFIG_BT_HCIBPA10X is not set
-+# CONFIG_BT_HCIBFUSB is not set
-+# CONFIG_BT_HCIVHCI is not set
-+# CONFIG_BT_MRVL is not set
-+# CONFIG_BT_ATH3K is not set
-+# CONFIG_AF_RXRPC is not set
-+CONFIG_FIB_RULES=y
-+CONFIG_WIRELESS=y
-+CONFIG_WIRELESS_EXT=y
-+CONFIG_WEXT_CORE=y
-+CONFIG_WEXT_PROC=y
-+CONFIG_WEXT_PRIV=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_EXT_SYSFS=y
-+# CONFIG_LIB80211 is not set
-+
-+#
-+# CFG80211 needs to be enabled for MAC80211
-+#
-+
-+#
-+# Some wireless drivers require a rate control algorithm
-+#
-+# CONFIG_WIMAX is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+# CONFIG_CAIF is not set
-+# CONFIG_CEPH_LIB is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_DEVTMPFS is not set
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_FIRMWARE_IN_KERNEL is not set
-+CONFIG_EXTRA_FIRMWARE=""
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_TESTS is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_SM_FTL is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+CONFIG_MTD_ROM=y
-+CONFIG_MTD_ABSENT=y
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+# CONFIG_MTD_PHYSMAP_COMPAT is not set
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SST25L is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND_ECC=y
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_VERIFY_WRITE=y
-+# CONFIG_MTD_SM_COMMON is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+# CONFIG_MTD_NAND_GPIO is not set
-+CONFIG_MTD_NAND_IDS=y
-+CONFIG_MTD_NAND_S3C2410=y
-+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-+CONFIG_MTD_NAND_S3C2410_HWECC=y
-+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# LPDDR flash memory drivers
-+#
-+# CONFIG_MTD_LPDDR is not set
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+# CONFIG_BLK_DEV_LOOP is not set
-+
-+#
-+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-+#
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=4096
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_MG_DISK is not set
-+# CONFIG_BLK_DEV_RBD is not set
-+# CONFIG_MISC_DEVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+CONFIG_SCSI_MOD=y
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_DMA is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+CONFIG_TUN=m
-+# CONFIG_VETH is not set
-+CONFIG_MII=y
-+# CONFIG_PHYLIB is not set
-+# CONFIG_NET_ETHERNET is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+CONFIG_WLAN=y
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-+
-+#
-+# Enable WiMAX (Networking options) to see the WiMAX drivers
-+#
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_USB_IPHETH is not set
-+# CONFIG_WAN is not set
-+
-+#
-+# CAIF transport drivers
-+#
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+# CONFIG_PHONE is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+# CONFIG_INPUT_SPARSEKMAP is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ADP5588 is not set
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_QT2160 is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+CONFIG_KEYBOARD_GPIO=y
-+# CONFIG_KEYBOARD_GPIO_POLLED is not set
-+# CONFIG_KEYBOARD_TCA6416 is not set
-+# CONFIG_KEYBOARD_MATRIX is not set
-+# CONFIG_KEYBOARD_LM8323 is not set
-+# CONFIG_KEYBOARD_MAX7359 is not set
-+# CONFIG_KEYBOARD_MCS is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_OPENCORES is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_ADS7846 is not set
-+# CONFIG_TOUCHSCREEN_AD7877 is not set
-+# CONFIG_TOUCHSCREEN_AD7879 is not set
-+# CONFIG_TOUCHSCREEN_BU21013 is not set
-+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-+# CONFIG_TOUCHSCREEN_EETI is not set
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+CONFIG_TOUCHSCREEN_S3C2410=y
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-+# CONFIG_TOUCHSCREEN_MCS5000 is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_INEXIO is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_QT602240 is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-+# CONFIG_TOUCHSCREEN_TSC2007 is not set
-+# CONFIG_TOUCHSCREEN_W90X900 is not set
-+# CONFIG_TOUCHSCREEN_TPS6507X is not set
-+CONFIG_INPUT_MISC=y
-+# CONFIG_INPUT_AD714X is not set
-+# CONFIG_INPUT_ATI_REMOTE is not set
-+# CONFIG_INPUT_ATI_REMOTE2 is not set
-+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-+# CONFIG_INPUT_POWERMATE is not set
-+# CONFIG_INPUT_YEALINK is not set
-+# CONFIG_INPUT_CM109 is not set
-+# CONFIG_INPUT_UINPUT is not set
-+CONFIG_INPUT_PCF50633_PMU=y
-+# CONFIG_INPUT_PCF8574 is not set
-+# CONFIG_INPUT_PWM_BEEPER is not set
-+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-+# CONFIG_INPUT_ADXL34X is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=y
-+# CONFIG_SERIO_SERPORT is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO_ALTERA_PS2 is not set
-+# CONFIG_SERIO_PS2MULT is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+CONFIG_VT_HW_CONSOLE_BINDING=y
-+# CONFIG_DEVKMEM is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+# CONFIG_N_GSM is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_SAMSUNG=y
-+CONFIG_SERIAL_SAMSUNG_UARTS=3
-+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-+CONFIG_SERIAL_S3C2440=y
-+# CONFIG_SERIAL_MAX3100 is not set
-+# CONFIG_SERIAL_MAX3107 is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_TIMBERDALE is not set
-+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-+# CONFIG_SERIAL_ALTERA_UART is not set
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+# CONFIG_RAMOOPS is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+# CONFIG_I2C_COMPAT is not set
-+CONFIG_I2C_CHARDEV=y
-+# CONFIG_I2C_MUX is not set
-+# CONFIG_I2C_HELPER_AUTO is not set
-+# CONFIG_I2C_SMBUS is not set
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+# CONFIG_I2C_DESIGNWARE is not set
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+CONFIG_HAVE_S3C2410_I2C=y
-+CONFIG_I2C_S3C2410=y
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_XILINX is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+CONFIG_SPI=y
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_BITBANG=y
-+CONFIG_SPI_GPIO=y
-+CONFIG_SPI_S3C24XX=y
-+# CONFIG_SPI_S3C24XX_FIQ is not set
-+CONFIG_SPI_S3C24XX_GPIO=y
-+# CONFIG_SPI_XILINX is not set
-+# CONFIG_SPI_DESIGNWARE is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+
-+#
-+# PPS support
-+#
-+# CONFIG_PPS is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+CONFIG_GPIO_SYSFS=y
-+
-+#
-+# Memory mapped GPIO expanders:
-+#
-+# CONFIG_GPIO_BASIC_MMIO is not set
-+CONFIG_GPIO_GLAMO=y
-+# CONFIG_GPIO_IT8761E is not set
-+# CONFIG_GPIO_VX855 is not set
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7300 is not set
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+# CONFIG_GPIO_SX150X is not set
-+# CONFIG_GPIO_ADP5588 is not set
-+CONFIG_GPIO_PCF50633=y
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_GPIO_MC33880 is not set
-+# CONFIG_GPIO_74X164 is not set
-+
-+#
-+# AC97 GPIO expanders:
-+#
-+
-+#
-+# MODULbus GPIO expanders:
-+#
-+# CONFIG_W1 is not set
-+CONFIG_POWER_SUPPLY=y
-+# CONFIG_POWER_SUPPLY_DEBUG is not set
-+# CONFIG_PDA_POWER is not set
-+# CONFIG_TEST_POWER is not set
-+# CONFIG_BATTERY_DS2782 is not set
-+# CONFIG_BATTERY_BQ20Z75 is not set
-+CONFIG_BATTERY_BQ27x00=y
-+CONFIG_BATTERY_BQ27X00_I2C=y
-+CONFIG_BATTERY_BQ27X00_PLATFORM=y
-+# CONFIG_BATTERY_MAX17040 is not set
-+# CONFIG_BATTERY_S3C_ADC is not set
-+CONFIG_CHARGER_PCF50633=y
-+# CONFIG_BATTERY_PLATFORM is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_S3C2410_WATCHDOG=y
-+# CONFIG_MAX63XX_WATCHDOG is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+CONFIG_MFD_SUPPORT=y
-+CONFIG_MFD_CORE=y
-+# CONFIG_MFD_88PM860X is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_EGPIO is not set
-+# CONFIG_HTC_PASIC3 is not set
-+# CONFIG_HTC_I2CPLD is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_TPS6507X is not set
-+# CONFIG_TWL4030_CORE is not set
-+# CONFIG_MFD_STMPE is not set
-+# CONFIG_MFD_TC35892 is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_MFD_T7L66XB is not set
-+# CONFIG_MFD_TC6387XB is not set
-+# CONFIG_MFD_TC6393XB is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_PMIC_ADP5520 is not set
-+# CONFIG_MFD_MAX8925 is not set
-+# CONFIG_MFD_MAX8998 is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM831X_I2C is not set
-+# CONFIG_MFD_WM831X_SPI is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+# CONFIG_MFD_WM8994 is not set
-+CONFIG_MFD_PCF50633=y
-+# CONFIG_MFD_MC13XXX is not set
-+CONFIG_PCF50633_ADC=y
-+# CONFIG_ABX500_CORE is not set
-+# CONFIG_EZX_PCAP is not set
-+CONFIG_MFD_GLAMO=y
-+CONFIG_MFD_GLAMO_DRM=y
-+# CONFIG_MFD_TPS6586X is not set
-+CONFIG_REGULATOR=y
-+# CONFIG_REGULATOR_DEBUG is not set
-+# CONFIG_REGULATOR_DUMMY is not set
-+CONFIG_REGULATOR_FIXED_VOLTAGE=y
-+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-+# CONFIG_REGULATOR_BQ24022 is not set
-+# CONFIG_REGULATOR_MAX1586 is not set
-+# CONFIG_REGULATOR_MAX8649 is not set
-+# CONFIG_REGULATOR_MAX8660 is not set
-+# CONFIG_REGULATOR_MAX8952 is not set
-+CONFIG_REGULATOR_PCF50633=y
-+# CONFIG_REGULATOR_LP3971 is not set
-+# CONFIG_REGULATOR_LP3972 is not set
-+# CONFIG_REGULATOR_TPS65023 is not set
-+# CONFIG_REGULATOR_TPS6507X is not set
-+# CONFIG_REGULATOR_ISL6271A is not set
-+# CONFIG_REGULATOR_AD5398 is not set
-+# CONFIG_MEDIA_SUPPORT is not set
-+
-+#
-+# Graphics support
-+#
-+CONFIG_DRM=y
-+CONFIG_DRM_KMS_HELPER=y
-++# CONFIG_DRM_MGA is not set
-++# CONFIG_DRM_VIA is not set
-++# CONFIG_DRM_SAVAGE is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_TMIO is not set
-+# CONFIG_FB_S3C2410 is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_FB_METRONOME is not set
-+# CONFIG_FB_MB862XX is not set
-+# CONFIG_FB_BROADSHEET is not set
-+# CONFIG_FB_GLAMO is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+# CONFIG_LCD_L4F00242T03 is not set
-+# CONFIG_LCD_LMS283GF05 is not set
-+# CONFIG_LCD_LTV350QV is not set
-+# CONFIG_LCD_TDO24M is not set
-+# CONFIG_LCD_VGG2432A4 is not set
-+# CONFIG_LCD_PLATFORM is not set
-+# CONFIG_LCD_S6E63M0 is not set
-+CONFIG_LCD_JBT6K74=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+# CONFIG_BACKLIGHT_GENERIC is not set
-+# CONFIG_BACKLIGHT_PWM is not set
-+# CONFIG_BACKLIGHT_ADP8860 is not set
-+CONFIG_BACKLIGHT_PCF50633=y
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+# CONFIG_FONT_8x16 is not set
-+CONFIG_FONT_6x11=y
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+# CONFIG_FONT_MINI_4x6 is not set
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_10x18 is not set
-+CONFIG_LOGO=y
-+# CONFIG_LOGO_LINUX_MONO is not set
-+# CONFIG_LOGO_LINUX_VGA16 is not set
-+# CONFIG_LOGO_LINUX_CLUT224 is not set
-+CONFIG_SOUND=y
-+CONFIG_SOUND_OSS_CORE=y
-+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
-+CONFIG_SND_JACK=y
-+CONFIG_SND_SEQUENCER=m
-+CONFIG_SND_SEQ_DUMMY=m
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+CONFIG_SND_SEQUENCER_OSS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+# CONFIG_SND_VERBOSE_PROCFS is not set
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+# CONFIG_SND_RAWMIDI_SEQ is not set
-+# CONFIG_SND_OPL3_LIB_SEQ is not set
-+# CONFIG_SND_OPL4_LIB_SEQ is not set
-+# CONFIG_SND_SBAWE_SEQ is not set
-+# CONFIG_SND_EMU10K1_SEQ is not set
-+# CONFIG_SND_DRIVERS is not set
-+# CONFIG_SND_ARM is not set
-+# CONFIG_SND_SPI is not set
-+# CONFIG_SND_USB is not set
-+CONFIG_SND_SOC=y
-+CONFIG_SND_S3C24XX_SOC=y
-+CONFIG_SND_S3C24XX_SOC_I2S=y
-+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=y
-+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-+# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
-+# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set
-+# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set
-+CONFIG_SND_SOC_I2C_AND_SPI=y
-+# CONFIG_SND_SOC_ALL_CODECS is not set
-+CONFIG_SND_SOC_WM8753=y
-+CONFIG_SND_SOC_LM4857=y
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_HID_PID is not set
-+# CONFIG_USB_HIDDEV is not set
-+
-+#
-+# Special HID drivers
-+#
-+# CONFIG_HID_3M_PCT is not set
-+CONFIG_HID_A4TECH=y
-+# CONFIG_HID_ACRUX_FF is not set
-+CONFIG_HID_APPLE=y
-+CONFIG_HID_BELKIN=y
-+# CONFIG_HID_CANDO is not set
-+CONFIG_HID_CHERRY=y
-+CONFIG_HID_CHICONY=y
-+# CONFIG_HID_PRODIKEYS is not set
-+CONFIG_HID_CYPRESS=y
-+CONFIG_HID_DRAGONRISE=y
-+# CONFIG_DRAGONRISE_FF is not set
-+# CONFIG_HID_EGALAX is not set
-+# CONFIG_HID_ELECOM is not set
-+CONFIG_HID_EZKEY=y
-+CONFIG_HID_KYE=y
-+# CONFIG_HID_UCLOGIC is not set
-+# CONFIG_HID_WALTOP is not set
-+CONFIG_HID_GYRATION=y
-+CONFIG_HID_TWINHAN=y
-+CONFIG_HID_KENSINGTON=y
-+CONFIG_HID_LOGITECH=y
-+# CONFIG_LOGITECH_FF is not set
-+# CONFIG_LOGIRUMBLEPAD2_FF is not set
-+# CONFIG_LOGIG940_FF is not set
-+# CONFIG_LOGIWII_FF is not set
-+# CONFIG_HID_MAGICMOUSE is not set
-+CONFIG_HID_MICROSOFT=y
-+# CONFIG_HID_MOSART is not set
-+CONFIG_HID_MONTEREY=y
-+CONFIG_HID_NTRIG=y
-+CONFIG_HID_ORTEK=y
-+CONFIG_HID_PANTHERLORD=y
-+# CONFIG_PANTHERLORD_FF is not set
-+CONFIG_HID_PETALYNX=y
-+# CONFIG_HID_PICOLCD is not set
-+# CONFIG_HID_QUANTA is not set
-+# CONFIG_HID_ROCCAT is not set
-+# CONFIG_HID_ROCCAT_KONE is not set
-+# CONFIG_HID_ROCCAT_PYRA is not set
-+CONFIG_HID_SAMSUNG=y
-+CONFIG_HID_SONY=y
-+# CONFIG_HID_STANTUM is not set
-+CONFIG_HID_SUNPLUS=y
-+CONFIG_HID_GREENASIA=y
-+# CONFIG_GREENASIA_FF is not set
-+CONFIG_HID_SMARTJOYPLUS=y
-+# CONFIG_SMARTJOYPLUS_FF is not set
-+CONFIG_HID_TOPSEED=y
-+CONFIG_HID_THRUSTMASTER=y
-+# CONFIG_THRUSTMASTER_FF is not set
-+# CONFIG_HID_WACOM is not set
-+CONFIG_HID_ZEROPLUS=y
-+# CONFIG_ZEROPLUS_FF is not set
-+# CONFIG_HID_ZYDACRON is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+# CONFIG_USB_DEVICEFS is not set
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_MON is not set
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_OXU210HP_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_ISP1760_HCD is not set
-+# CONFIG_USB_ISP1362_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+# CONFIG_USB_MUSB_HDRC is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-+#
-+
-+#
-+# also be needed; see USB_STORAGE Help for more info
-+#
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_YUREX is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=500
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_R8A66597 is not set
-+CONFIG_USB_GADGET_S3C2410=y
-+CONFIG_USB_S3C2410=y
-+# CONFIG_USB_S3C2410_DEBUG is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+# CONFIG_USB_GADGET_DUALSPEED is not set
-+# CONFIG_USB_ZERO is not set
-+# CONFIG_USB_AUDIO is not set
-+CONFIG_USB_ETH=y
-+CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_ETH_EEM is not set
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FUNCTIONFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_MASS_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+# CONFIG_USB_G_MULTI is not set
-+# CONFIG_USB_G_HID is not set
-+# CONFIG_USB_G_DBGP is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+# CONFIG_USB_GPIO_VBUS is not set
-+# CONFIG_USB_ULPI is not set
-+# CONFIG_NOP_USB_XCEIV is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_UNSAFE_RESUME=y
-+
-+#
-+# MMC/SD/SDIO Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_MINORS=8
-+# CONFIG_MMC_BLOCK_BOUNCE is not set
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD/SDIO Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+# CONFIG_MMC_SPI is not set
-+CONFIG_MMC_S3C=y
-+# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set
-+CONFIG_MMC_S3C_PIO=y
-+# CONFIG_MMC_S3C_DMA is not set
-+# CONFIG_MMC_S3C_PIODMA is not set
-+CONFIG_MMC_GLAMO=y
-+# CONFIG_MMC_USHC is not set
-+# CONFIG_MEMSTICK is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+# CONFIG_LEDS_S3C24XX is not set
-+# CONFIG_LEDS_PCA9532 is not set
-+CONFIG_LEDS_GPIO=y
-+CONFIG_LEDS_GPIO_PLATFORM=y
-+# CONFIG_LEDS_LP3944 is not set
-+# CONFIG_LEDS_LP5521 is not set
-+# CONFIG_LEDS_LP5523 is not set
-+# CONFIG_LEDS_PCA955X is not set
-+# CONFIG_LEDS_DAC124S085 is not set
-+CONFIG_LEDS_PWM=y
-+# CONFIG_LEDS_REGULATOR is not set
-+# CONFIG_LEDS_BD2802 is not set
-+# CONFIG_LEDS_LT3593 is not set
-+CONFIG_LEDS_TRIGGERS=y
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-+# CONFIG_LEDS_TRIGGER_GPIO is not set
-+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-+
-+#
-+# iptables trigger is under Netfilter config (LED target)
-+#
-+# CONFIG_ACCESSIBILITY is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_DS3232 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_ISL12022 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+# CONFIG_RTC_DRV_BQ32K is not set
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+# CONFIG_RTC_DRV_RX8025 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_DS1390 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_DS3234 is not set
-+# CONFIG_RTC_DRV_PCF2123 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_MSM6242 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_RP5C01 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+CONFIG_RTC_DRV_PCF50633=y
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_RTC_DRV_S3C is not set
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_AUXDISPLAY is not set
-+# CONFIG_UIO is not set
-+CONFIG_STAGING=y
-+# CONFIG_STAGING_EXCLUDE_BUILD is not set
-+# CONFIG_USB_IP_COMMON is not set
-+# CONFIG_ECHO is not set
-+# CONFIG_BRCM80211 is not set
-+# CONFIG_RT2870 is not set
-+# CONFIG_COMEDI is not set
-+# CONFIG_ASUS_OLED is not set
-+# CONFIG_R8712U is not set
-+# CONFIG_TRANZPORT is not set
-+# CONFIG_POHMELFS is not set
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_LINE6_USB is not set
-+# CONFIG_VT6656 is not set
-+# CONFIG_FB_UDL is not set
-+# CONFIG_IIO is not set
-+# CONFIG_ZRAM is not set
-+# CONFIG_BATMAN_ADV is not set
-+# CONFIG_FB_SM7XX is not set
-+
-+#
-+# Texas Instruments shared transport line discipline
-+#
-+# CONFIG_ADIS16255 is not set
-+# CONFIG_SMB_FS is not set
-+CONFIG_MACH_NO_WESTBRIDGE=y
-+# CONFIG_ATH6K_LEGACY is not set
-+# CONFIG_BCM_WIMAX is not set
-+# CONFIG_FT1000 is not set
-+
-+#
-+# Speakup console speech
-+#
-+# CONFIG_SPEAKUP is not set
-+CONFIG_AR6000_WLAN=y
-+# CONFIG_AR6000_WLAN_DEBUG is not set
-+# CONFIG_AR6000_WLAN_RESET is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_BTRFS_FS is not set
-+# CONFIG_NILFS2_FS is not set
-+CONFIG_FILE_LOCKING=y
-+CONFIG_FSNOTIFY=y
-+# CONFIG_DNOTIFY is not set
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_FANOTIFY is not set
-+# CONFIG_QUOTA is not set
-+# CONFIG_QUOTACTL is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# Caches
-+#
-+# CONFIG_FSCACHE is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+# CONFIG_MSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+CONFIG_MISC_FILESYSTEMS=y
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+CONFIG_JFFS2_SUMMARY=y
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_LOGFS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_SQUASHFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+# CONFIG_NETWORK_FILESYSTEMS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+CONFIG_OSF_PARTITION=y
-+CONFIG_AMIGA_PARTITION=y
-+CONFIG_ATARI_PARTITION=y
-+CONFIG_MAC_PARTITION=y
-+CONFIG_MSDOS_PARTITION=y
-+CONFIG_BSD_DISKLABEL=y
-+CONFIG_MINIX_SUBPARTITION=y
-+CONFIG_SOLARIS_X86_PARTITION=y
-+CONFIG_UNIXWARE_DISKLABEL=y
-+CONFIG_LDM_PARTITION=y
-+CONFIG_LDM_DEBUG=y
-+CONFIG_SGI_PARTITION=y
-+CONFIG_ULTRIX_PARTITION=y
-+CONFIG_SUN_PARTITION=y
-+CONFIG_KARMA_PARTITION=y
-+CONFIG_EFI_PARTITION=y
-+CONFIG_SYSV68_PARTITION=y
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+# CONFIG_NLS_CODEPAGE_437 is not set
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+# CONFIG_NLS_ISO8859_1 is not set
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_WARN_DEPRECATED is not set
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+# CONFIG_MAGIC_SYSRQ is not set
-+CONFIG_STRIP_ASM_SYMS=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_DEBUG_KERNEL is not set
-+# CONFIG_HARDLOCKUP_DETECTOR is not set
-+CONFIG_BKL=y
-+# CONFIG_SPARSE_RCU_POINTER is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_MEMORY_INIT=y
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_LKDTM is not set
-+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-+CONFIG_HAVE_FUNCTION_TRACER=y
-+CONFIG_HAVE_DYNAMIC_FTRACE=y
-+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-+CONFIG_TRACING_SUPPORT=y
-+# CONFIG_FTRACE is not set
-+# CONFIG_DYNAMIC_DEBUG is not set
-+# CONFIG_ATOMIC64_SELFTEST is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_HAVE_ARCH_KGDB=y
-+# CONFIG_STRICT_DEVMEM is not set
-+# CONFIG_ARM_UNWIND is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_OC_ETM is not set
-+CONFIG_DEBUG_S3C_UART=2
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY_DMESG_RESTRICT is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+CONFIG_DEFAULT_SECURITY_DAC=y
-+CONFIG_DEFAULT_SECURITY=""
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_HASH=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_PCOMP=y
-+CONFIG_CRYPTO_PCOMP2=y
-+# CONFIG_CRYPTO_MANAGER is not set
-+# CONFIG_CRYPTO_MANAGER2 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+# CONFIG_CRYPTO_CBC is not set
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+# CONFIG_CRYPTO_ECB is not set
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_PCBC is not set
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_VMAC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_GHASH is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+CONFIG_CRYPTO_ZLIB=y
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+# CONFIG_CRYPTO_HW is not set
-+# CONFIG_BINARY_PRINTF is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_GENERIC_FIND_LAST_BIT=y
-+CONFIG_CRC_CCITT=y
-+CONFIG_CRC16=y
-+CONFIG_CRC_T10DIF=y
-+CONFIG_CRC_ITU_T=y
-+CONFIG_CRC32=y
-+CONFIG_CRC7=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_LZO_DECOMPRESS=y
-+CONFIG_DECOMPRESS_GZIP=y
-+CONFIG_DECOMPRESS_BZIP2=y
-+CONFIG_DECOMPRESS_LZMA=y
-+CONFIG_DECOMPRESS_LZO=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_DMA=y
-+CONFIG_NLATTR=y
-+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
index 2242ce2..7ade2b8 100644
--- a/arch/arm/include/asm/fiq.h
int claim_fiq(struct fiq_handler *f)
{
int ret = 0;
+diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
+index 7245a55..2b9d891 100644
+--- a/arch/arm/mach-s3c2410/Kconfig
++++ b/arch/arm/mach-s3c2410/Kconfig
+@@ -178,4 +178,24 @@ config MACH_QT2410
+ help
+ Say Y here if you are using the Armzone QT2410
+
++config MACH_NEO1973_GTA01
++ bool "FIC Neo1973 GSM Phone (GTA01 Hardware)"
++ select CPU_S3C2410
++ select MACH_NEO1973
++ select S3C_DEV_USB_HOST
++ select MFD_PCF50606
++ select INPUT_PCF50606_PMU
++ select PCF50606_ADC
++ select PCF50606_GPIO
++ select RTC_DRV_PCF50606
++ select REGULATOR_PCF50606
++ select CHARGER_PCF50606
++ select PCF50606_WATCHDOG
++ select POWER_SUPPLY
++ select BATTERY_GTA01
++ select S3C24XX_ADC
++ select S3C_DEV_NAND
++ help
++ Say Y here if you are using the FIC Neo1973 GSM Phone
++
+ endmenu
+diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
+index 0d468e9..aecf5e5 100644
+--- a/arch/arm/mach-s3c2410/Makefile
++++ b/arch/arm/mach-s3c2410/Makefile
+@@ -40,3 +40,4 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
+ # machine additions
+
+ obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
++obj-$(CONFIG_MACH_NEO1973_GTA01) += mach-gta01.o
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index f7f6b07..f9ddfa9 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
-#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
-#endif
+#include <asm-generic/gpio.h>
+diff --git a/arch/arm/mach-s3c2410/include/mach/gta01.h b/arch/arm/mach-s3c2410/include/mach/gta01.h
+new file mode 100644
+index 0000000..673a116
+--- /dev/null
++++ b/arch/arm/mach-s3c2410/include/mach/gta01.h
+@@ -0,0 +1,67 @@
++#ifndef _GTA01_H
++#define _GTA01_H
++
++#include <mach/regs-gpio.h>
++#include <mach/irqs.h>
++
++/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
++#define GTA01v3_SYSTEM_REV 0x00000130
++#define GTA01v4_SYSTEM_REV 0x00000140
++#define GTA01Bv2_SYSTEM_REV 0x00000220
++#define GTA01Bv3_SYSTEM_REV 0x00000230
++#define GTA01Bv4_SYSTEM_REV 0x00000240
++
++/* !!!!!!!!!!! */
++#define S3C_SYSTEM_REV_ATAG GTA01Bv2_SYSTEM_REV
++
++/* Backlight */
++
++/* Definitions common to all revisions */
++#define GTA01_GPIO_BACKLIGHT S3C2410_GPB(0)
++#define GTA01_GPIO_GPS_PWRON S3C2410_GPB(1)
++#define GTA01_GPIO_MODEM_RST S3C2410_GPB(6)
++#define GTA01_GPIO_MODEM_ON S3C2410_GPB(7)
++#define GTA01_GPIO_LCD_RESET S3C2410_GPC(6)
++#define GTA01_GPIO_PMU_IRQ S3C2410_GPG(8)
++#define GTA01_GPIO_JACK_INSERT S3C2410_GPF(4)
++#define GTA01_GPIO_nSD_DETECT S3C2410_GPF(5)
++#define GTA01_GPIO_AUX_KEY S3C2410_GPF(6)
++#define GTA01_GPIO_HOLD_KEY S3C2410_GPF(7)
++
++#define GTA01_IRQ_MODEM IRQ_EINT1
++#define GTA01_IRQ_JACK_INSERT IRQ_EINT4
++#define GTA01_IRQ_nSD_DETECT IRQ_EINT5
++#define GTA01_IRQ_AUX_KEY IRQ_EINT6
++
++/* GTA01v3 */
++#define GTA01v3_GPIO_nGSM_EN S3C2410_GPG(9)
++
++/* GTA01v4 */
++#define GTA01_GPIO_MODEM_DNLOAD S3C2410_GPG(0)
++
++/* GTA01Bv2 */
++#define GTA01Bv2_GPIO_nGSM_EN S3C2410_GPF(2)
++#define GTA01Bv2_GPIO_VIBRATOR_ON S3C2410_GPB(10)
++#define GTA01Bv2_IRQ_PCF50606 IRQ_EINT16
++
++/* GTA01Bv3 */
++#define GTA01_GPIO_GPS_EN_3V3 S3C2410_GPG(9)
++
++#define GTA01_GPIO_SDMMC_ON S3C2410_GPB(2)
++#define GTA01_GPIO_BT_EN S3C2410_GPB(5)
++#define GTA01_GPIO_USB_PULLUP S3C2410_GPB(9)
++
++#define GTA01_GPIO_GPS_EN_2V8 S3C2410_GPG(9)
++#define GTA01_GPIO_GPS_EN_3V S3C2410_GPG(10)
++#define GTA01_GPIO_GPS_RESET S3C2410_GPC(0)
++
++/* GTA01Bv4 */
++#define GTA01Bv4_GPIO_nNAND_WP S3C2410_GPA(16)
++#define GTA01Bv4_GPIO_VIBRATOR_ON S3C2410_GPB(3)
++#define GTA01Bv4_GPIO_PMU_IRQ S3C2410_GPG(1)
++
++#define GTA01Bv4_IRQ_PCF50606 IRQ_EINT9
++
++extern struct pcf50606 *gta01_pcf;
++
++#endif /* _GTA01_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 11bb0f0..d22ffca 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+#define NR_IRQS IRQ_BOARD_END
+
#endif /* __ASM_ARCH_IRQ_H */
+diff --git a/arch/arm/mach-s3c2410/mach-gta01.c b/arch/arm/mach-s3c2410/mach-gta01.c
+new file mode 100644
+index 0000000..337f7aa
+--- /dev/null
++++ b/arch/arm/mach-s3c2410/mach-gta01.c
+@@ -0,0 +1,925 @@
++/*
++ * linux/arch/arm/mach-s3c2410/mach-gta01.c
++ *
++ * S3C2410 Machine Support for the FIC Neo1973 GTA01
++ *
++ * Copyright (C) 2006-2007 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/serial_core.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++
++#include <linux/mmc/host.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/pmic.h>
++#include <linux/mfd/pcf50606/mbc.h>
++#include <linux/mfd/pcf50606/adc.h>
++
++#include <linux/regulator/machine.h>
++#include <linux/regulator/consumer.h>
++
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <mach/hardware.h>
++#include <mach/io.h>
++#include <asm/mach-types.h>
++
++#include <mach/regs-gpio.h>
++#include <mach/gpio-fns.h>
++#include <mach/fb.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++
++#include <mach/gta01.h>
++
++#include <plat/regs-serial.h>
++#include <plat/nand.h>
++#include <plat/devs.h>
++#include <plat/cpu.h>
++#include <plat/pm.h>
++#include <plat/udc.h>
++#include <plat/iic.h>
++#include <plat/mci.h>
++#include <plat/usb-control.h>
++#include <plat/ts.h>
++/*#include <mach/neo1973-pm-gsm.h>*/
++
++#include <linux/jbt6k74.h>
++
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
++
++#include <linux/pwm_backlight.h>
++#include <linux/leds_pwm.h>
++
++#include <linux/gpio.h>
++
++static void gta01_pmu_attach_child_devices(struct pcf50606 *pcf);
++
++static struct map_desc gta01_iodesc[] __initdata = {
++ {
++ .virtual = 0xe0000000,
++ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000),
++ .length = SZ_1M,
++ .type = MT_DEVICE
++ },
++};
++
++#define UCON S3C2410_UCON_DEFAULT
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++/* UFCON for the gta01 sets the FIFO trigger level at 4, not 8 */
++#define UFCON_GTA01_PORT0 S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg gta01_uartcfgs[] = {
++ [0] = {
++ .hwport = 0,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON_GTA01_PORT0,
++ },
++ [1] = {
++ .hwport = 1,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++};
++
++/* TODO */
++static void gta01_pmu_event_callback(struct pcf50606 *pcf, int irq)
++{
++ /*TODO : Handle ACD here */
++}
++#if 0
++/* FIXME : Goes away when ACD is handled above */
++static int pmu_callback(struct device *dev, unsigned int feature,
++ enum pmu_event event)
++{
++ switch (feature) {
++ case PCF50606_FEAT_ACD:
++ switch (event) {
++ case PMU_EVT_INSERT:
++ pcf50606_charge_fast(pcf50606_global, 1);
++ break;
++ case PMU_EVT_REMOVE:
++ pcf50606_charge_fast(pcf50606_global, 0);
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ return 0;
++}
++#endif
++struct pcf50606 *gta01_pcf;
++
++static struct platform_device gta01_pm_gsm_dev = {
++ .name = "neo1973-pm-gsm",
++};
++
++static struct platform_device gta01_pm_bt_dev = {
++ .name = "neo1973-pm-bt",
++};
++static struct platform_device gta01_pm_gps_dev = {
++ .name = "neo1973-pm-gps",
++};
++
++static struct regulator_consumer_supply ioreg_consumers[] = {
++ {
++ .dev = >a01_pm_gps_dev.dev,
++ .supply = "GPS_2V8",
++ },
++};
++
++static struct regulator_consumer_supply d1reg_consumers[] = {
++ {
++ .dev = >a01_pm_gps_dev.dev,
++ .supply = "GPS_3V",
++ },
++ {
++ .dev = >a01_pm_bt_dev.dev,
++ .supply = "BT_3V1",
++ },
++};
++
++static struct regulator_consumer_supply dcd_consumers[] = {
++ {
++ .dev = >a01_pm_gps_dev.dev,
++ .supply = "GPS_3V3",
++ },
++ {
++ .dev = >a01_pm_gps_dev.dev,
++ .supply = "GPS_1V5",
++ },
++};
++
++static struct regulator_consumer_supply d2reg_consumers[] = {
++ {
++ .dev = >a01_pm_gps_dev.dev,
++ .supply = "GPS_2V5",
++ },
++ {
++ .dev = &s3c_device_sdi.dev,
++ .supply = "SD_3V3",
++ },
++};
++
++#if 0
++/* This will come with 2.6.32. Don't forget to uncomment it then. */
++static struct regulator_consumer_supply lpreg_consumers[] = {
++ REGULATOR_SUPPLY("VDC", "jbt6k74"),
++ REGULATOR_SUPPLY("VDDIO", "jbt6k74"),
++};
++#else
++static struct regulator_consumer_supply lpreg_consumers[] = {
++ { .supply = "VDC", },
++ { .supply = "VDDIO", },
++};
++#endif
++
++#if 0
++
++static int gta01_bat_get_charging_status(void)
++{
++ struct pcf50606 *pcf = gta01_pcf;
++ u8 mbcc1, chgmod;
++
++ mbcc1 = pcf50606_reg_read(pcf, PCF50606_REG_MBCC1);
++ chgmod = mbcc1 & PCF50606_MBCC1_CHGMOD_MASK;
++
++ if (chgmod == PCF50606_MBCC1_CHGMOD_IDLE)
++ return 0;
++ else
++ return 1;
++}
++
++static int gta01_bat_get_voltage(void)
++{
++ struct pcf50606 *pcf = gta01_pcf;
++ u16 adc, mv = 0;
++
++ adc = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_BATVOLT_RES);
++ mv = (adc * 6000) / 1024;
++
++ return mv * 1000;
++}
++
++static int gta01_bat_get_current(void)
++{
++ struct pcf50606 *pcf = gta01_pcf;
++ u16 adc_battvolt, adc_adcin1;
++ s32 res;
++
++ adc_battvolt = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_BATVOLT_SUBTR);
++ adc_adcin1 = pcf50606_adc_sync_read(pcf, PCF50606_ADCMUX_ADCIN1_SUBTR);
++ res = (adc_battvolt - adc_adcin1) * 2400;
++
++ /*rsense is 220 milli */
++ return (res * 1000) / (220 * 1024) * 1000;
++}
++
++static struct gta01_bat_platform_data gta01_bat_pdata = {
++ .get_charging_status = gta01_bat_get_charging_status,
++ .get_voltage = gta01_bat_get_voltage,
++ .get_current = gta01_bat_get_current,
++};
++
++static struct platform_device gta01_bat = {
++ .name = "gta01_battery",
++ .id = -1,
++ .dev = {
++ .platform_data = >a01_bat_pdata,
++ }
++};
++#endif
++
++static void __devinit gta01_pcf_probe_done(struct pcf50606 *pcf)
++{
++ gta01_pcf = pcf;
++
++ gta01_pmu_attach_child_devices(pcf);
++}
++
++static int gps_registered_regulators = 0;
++
++static void gta01_pmu_regulator_registered(struct pcf50606 *pcf, int id)
++{
++ switch(id) {
++ case PCF50606_REGULATOR_D1REG:
++ platform_device_register(>a01_pm_bt_dev);
++ gps_registered_regulators++;
++ break;
++ case PCF50606_REGULATOR_D2REG:
++ gps_registered_regulators++;
++ break;
++ case PCF50606_REGULATOR_IOREG:
++ case PCF50606_REGULATOR_DCD:
++ gps_registered_regulators++;
++ break;
++ }
++
++ /* All GPS related regulators registered ? */
++ if (gps_registered_regulators == 4)
++ platform_device_register(>a01_pm_gps_dev);
++}
++
++static struct pcf50606_platform_data gta01_pcf_pdata __devinitdata = {
++ .resumers = {
++ [0] = PCF50606_INT1_ALARM |
++ PCF50606_INT1_ONKEYF |
++ PCF50606_INT1_EXTONR,
++ [1] = PCF50606_INT2_CHGWD10S |
++ PCF50606_INT2_CHGPROT |
++ PCF50606_INT2_CHGERR,
++ [2] = PCF50606_INT3_LOWBAT |
++ PCF50606_INT3_HIGHTMP |
++ PCF50606_INT3_ACDINS,
++ },
++ .mbc_event_callback = gta01_pmu_event_callback,
++ .reg_init_data = {
++ /* BT, GPS */
++ [PCF50606_REGULATOR_D1REG] = {
++ .constraints = {
++ .min_uV = 3000000,
++ .max_uV = 3150000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .apply_uV = 1,
++ },
++ .num_consumer_supplies = ARRAY_SIZE(d1reg_consumers),
++ .consumer_supplies = d1reg_consumers,
++ },
++ /* GPS */
++ [PCF50606_REGULATOR_D2REG] = {
++ .constraints = {
++ .min_uV = 1650000,
++ .max_uV = 3300000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
++ .apply_uV = 1,
++ },
++ .num_consumer_supplies = ARRAY_SIZE(d2reg_consumers),
++ .consumer_supplies = d2reg_consumers,
++
++ },
++ /* RTC/Standby */
++ [PCF50606_REGULATOR_D3REG] = {
++ .constraints = {
++ .min_uV = 1800000,
++ .max_uV = 2100000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .always_on = 1,
++ .state_mem = {
++ .enabled = 1,
++ },
++ },
++ .num_consumer_supplies = 0,
++ },
++ /* GPS */
++ [PCF50606_REGULATOR_DCD] = {
++ .constraints = {
++ .min_uV = 1500000,
++ .max_uV = 1500000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .apply_uV = 1,
++ },
++ .num_consumer_supplies = ARRAY_SIZE(dcd_consumers),
++ .consumer_supplies = dcd_consumers,
++ },
++
++ /* S3C2410 Memory and IO, Vibrator, RAM, NAND, AMP, SD Card */
++ [PCF50606_REGULATOR_DCDE] = {
++ .constraints = {
++ .min_uV = 3300000,
++ .max_uV = 3300000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .apply_uV = 1,
++ .always_on = 1,
++ .state_mem = {
++ .enabled = 1,
++ },
++ },
++ .num_consumer_supplies = 0,
++ },
++ /* SoC */
++ [PCF50606_REGULATOR_DCUD] = {
++ .constraints = {
++ .min_uV = 2100000,
++ .max_uV = 2100000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .apply_uV = 1,
++ .always_on = 1,
++ .state_mem = {
++ .enabled = 1,
++ },
++ },
++ .num_consumer_supplies = 0,
++ },
++ /* Codec, GPS */
++ [PCF50606_REGULATOR_IOREG] = {
++ .constraints = {
++ .min_uV = 3300000,
++ .max_uV = 3300000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .apply_uV = 1,
++ .always_on = 1,
++ },
++ .num_consumer_supplies = ARRAY_SIZE(ioreg_consumers),
++ .consumer_supplies = ioreg_consumers,
++
++ },
++ /* LCM */
++ [PCF50606_REGULATOR_LPREG] = {
++ .constraints = {
++ .min_uV = 3300000,
++ .max_uV = 3300000,
++ .valid_modes_mask = REGULATOR_MODE_NORMAL,
++ .apply_uV = 1,
++ },
++ .num_consumer_supplies = ARRAY_SIZE(lpreg_consumers),
++ .consumer_supplies = lpreg_consumers,
++ },
++ },
++ .probe_done = gta01_pcf_probe_done,
++ .regulator_registered = gta01_pmu_regulator_registered,
++};
++
++static void mangle_pmu_pdata_by_system_rev(void)
++{
++ struct regulator_init_data *reg_init_data;
++
++ reg_init_data = gta01_pcf_pdata.reg_init_data;
++
++ switch (S3C_SYSTEM_REV_ATAG) {
++ case GTA01Bv4_SYSTEM_REV:
++ /* FIXME : gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD; */
++ break;
++ case GTA01Bv3_SYSTEM_REV:
++ case GTA01Bv2_SYSTEM_REV:
++ reg_init_data[PCF50606_REGULATOR_D3REG].constraints.state_mem.enabled = 1;
++ break;
++ default:
++ break;
++ }
++}
++
++static void gta01_power_off(void)
++{
++ pcf50606_reg_write(gta01_pcf, PCF50606_REG_OOCC1,
++ PCF50606_OOCC1_GOSTDBY);
++}
++
++/* LCD driver info */
++
++/* Configuration for 480x640 toppoly TD028TTEC1.
++ * Do not mark this as __initdata or it will break! */
++static struct s3c2410fb_display gta01_displays[] = {
++ {
++ .type = S3C2410_LCDCON1_TFT,
++ .width = 43,
++ .height = 58,
++ .xres = 480,
++ .yres = 640,
++ .bpp = 16,
++
++ .pixclock = 40000, /* HCLK/4 */
++ .left_margin = 104,
++ .right_margin = 8,
++ .hsync_len = 8,
++ .upper_margin = 2,
++ .lower_margin = 16,
++ .vsync_len = 2,
++ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
++ S3C2410_LCDCON5_INVVCLK |
++ S3C2410_LCDCON5_INVVLINE |
++ S3C2410_LCDCON5_INVVFRAME |
++ S3C2410_LCDCON5_PWREN |
++ S3C2410_LCDCON5_HWSWP,
++ },
++ {
++ .type = S3C2410_LCDCON1_TFT,
++ .width = 43,
++ .height = 58,
++ .xres = 480,
++ .yres = 640,
++ .bpp = 32,
++
++ .pixclock = 40000, /* HCLK/4 */
++ .left_margin = 104,
++ .right_margin = 8,
++ .hsync_len = 8,
++ .upper_margin = 2,
++ .lower_margin = 16,
++ .vsync_len = 2,
++ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
++ S3C2410_LCDCON5_INVVCLK |
++ S3C2410_LCDCON5_INVVLINE |
++ S3C2410_LCDCON5_INVVFRAME |
++ S3C2410_LCDCON5_PWREN |
++ S3C2410_LCDCON5_HWSWP,
++ },
++ {
++ .type = S3C2410_LCDCON1_TFT,
++ .width = 43,
++ .height = 58,
++ .xres = 240,
++ .yres = 320,
++ .bpp = 16,
++
++ .pixclock = 40000, /* HCLK/4 */
++ .left_margin = 104,
++ .right_margin = 8,
++ .hsync_len = 8,
++ .upper_margin = 2,
++ .lower_margin = 16,
++ .vsync_len = 2,
++ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
++ S3C2410_LCDCON5_INVVCLK |
++ S3C2410_LCDCON5_INVVLINE |
++ S3C2410_LCDCON5_INVVFRAME |
++ S3C2410_LCDCON5_PWREN |
++ S3C2410_LCDCON5_HWSWP,
++ },
++};
++
++static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = {
++ .displays = gta01_displays,
++ .num_displays = ARRAY_SIZE(gta01_displays),
++ .default_display = 0,
++
++ .lpcsel = ((0xCE6) & ~7) | 1<<4,
++};
++
++static struct s3c2410_nand_set gta01_nand_sets[] = {
++ [0] = {
++ .name = "neo1973-nand",
++ .nr_chips = 1,
++/* .flags = S3C2410_NAND_BBT,*/
++ },
++};
++
++static struct s3c2410_platform_nand gta01_nand_info = {
++ .tacls = 20,
++ .twrph0 = 60,
++ .twrph1 = 20,
++ .nr_sets = ARRAY_SIZE(gta01_nand_sets),
++ .sets = gta01_nand_sets,
++};
++
++/* MMC */
++
++static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd)
++{
++ printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u)\n",
++ power_mode, vdd);
++
++ switch (power_mode) {
++ case MMC_POWER_OFF:
++ gpio_set_value(GTA01_GPIO_SDMMC_ON, 1);
++ break;
++ case MMC_POWER_UP:
++ gpio_set_value(GTA01_GPIO_SDMMC_ON, 0);
++ break;
++ }
++}
++
++static struct s3c24xx_mci_pdata gta01_mmc_cfg = {
++ .gpio_detect = GTA01_GPIO_nSD_DETECT,
++ .set_power = >a01_mmc_set_power,
++ .ocr_avail = MMC_VDD_32_33,
++};
++
++/* UDC */
++
++static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++ printk("udc command: %d\n", cmd);
++ switch (cmd) {
++ case S3C2410_UDC_P_ENABLE:
++ gpio_set_value(GTA01_GPIO_USB_PULLUP, 1);
++ break;
++ case S3C2410_UDC_P_DISABLE:
++ gpio_set_value(GTA01_GPIO_USB_PULLUP, 0);
++ break;
++ default:
++ break;
++ }
++}
++
++/* use a work queue, since I2C API inherently schedules
++ * and we get called in hardirq context from UDC driver */
++
++struct vbus_draw {
++ struct work_struct work;
++ int ma;
++};
++static struct vbus_draw gta01_udc_vbus_drawer;
++
++static void __gta01_udc_vbus_draw(struct work_struct *work)
++{
++ /*
++ * This is a fix to work around boot-time ordering problems if the
++ * s3c2410_udc is initialized before the pcf50606 driver has defined
++ * pcf50606_global
++ */
++ if (!gta01_pcf)
++ return;
++#if 0
++ if (gta01_udc_vbus_drawer.ma >= 500) {
++ /* enable fast charge */
++ printk(KERN_DEBUG "udc: enabling fast charge\n");
++ pcf50606_charge_fast(gta01_pcf, 1);
++ } else {
++ /* disable fast charge */
++ printk(KERN_DEBUG "udc: disabling fast charge\n");
++ pcf50606_charge_fast(gta01_pcf, 0);
++ }
++#endif
++}
++
++static void gta01_udc_vbus_draw(unsigned int ma)
++{
++ gta01_udc_vbus_drawer.ma = ma;
++ schedule_work(>a01_udc_vbus_drawer.work);
++}
++
++static struct s3c2410_udc_mach_info gta01_udc_cfg = {
++ .vbus_draw = gta01_udc_vbus_draw,
++ .udc_command = gta01_udc_command,
++};
++
++/* Touchscreen */
++
++static struct s3c2410_ts_mach_info gta01_ts_cfg = {
++ .delay = 10000,
++ .presc = 0xff, /* slow as we can go */
++ .oversampling_shift = 2,
++};
++
++/* SPI / Display */
++
++const struct jbt6k74_platform_data gta01_jbt6k74_pdata = {
++ .gpio_reset = GTA01_GPIO_LCD_RESET,
++};
++
++static struct spi_board_info gta01_spi_board_info[] = {
++ {
++ .modalias = "jbt6k74",
++ .platform_data = >a01_jbt6k74_pdata,
++ .controller_data = (void*)S3C2410_GPG(3),
++ .max_speed_hz = 10 * 1000 * 1000,
++ .bus_num = 1,
++ },
++};
++
++static struct spi_gpio_platform_data spigpio_platform_data = {
++ .sck = S3C2410_GPG(7),
++ .mosi = S3C2410_GPG(6),
++ .miso = S3C2410_GPG(5),
++ .num_chipselect = 1,
++};
++
++static struct platform_device gta01_lcm_spigpio_device = {
++ .name = "spi_gpio",
++ .id = 1,
++ .dev = {
++ .platform_data = &spigpio_platform_data,
++ },
++};
++
++/* Backlight */
++
++static struct platform_pwm_backlight_data gta01_bl_pdata = {
++ .max_brightness = 0xff,
++ .dft_brightness = 0xff,
++ .pwm_period_ns = 5000000, /* TODO: Tweak this */
++ .pwm_id = 0,
++};
++
++static struct platform_device gta01_bl_device = {
++ .name = "pwm-backlight",
++ .id = -1,
++ .dev = {
++ .platform_data = >a01_bl_pdata,
++ .parent = &s3c_device_timer[0].dev,
++ },
++};
++
++/* Vibrator */
++static struct led_pwm gta01_vibrator = {
++ .name = "gta01::vibrator",
++ .max_brightness = 0xff,
++ .pwm_period_ns = 500000, /* TODO: Tweak this */
++ .pwm_id = 3,
++};
++
++static struct led_pwm_platform_data gta01_vibrator_pdata = {
++ .num_leds = 1,
++ .leds = >a01_vibrator,
++};
++
++static struct platform_device gta01_vibrator_device_bv4 = {
++ .name = "leds_pwm",
++ .id = -1,
++ .dev = {
++ .platform_data = >a01_vibrator_pdata,
++ .parent = &s3c_device_timer[3].dev,
++ }
++};
++
++static struct gpio_led gta01_vibrator_bv2 = {
++ .name = "gta01::vibrator",
++ .gpio = GTA01Bv2_GPIO_VIBRATOR_ON,
++ .default_state = LEDS_GPIO_DEFSTATE_OFF,
++};
++
++static struct gpio_led_platform_data gta01_vibrator_pdata_bv2 = {
++ .num_leds = 1,
++ .leds = >a01_vibrator_bv2,
++};
++
++static struct platform_device gta01_vibrator_device_bv2 = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = >a01_vibrator_pdata_bv2,
++ }
++};
++
++static struct platform_device *gta01_vibrator_device = >a01_vibrator_device_bv4;
++/* Buttons */
++
++static struct gpio_keys_button gta01_buttons[] = {
++ {
++ .gpio = GTA01_GPIO_AUX_KEY,
++ .code = KEY_PHONE,
++ .desc = "Aux",
++ .type = EV_KEY,
++ .debounce_interval = 100,
++ },
++ {
++ .gpio = GTA01_GPIO_HOLD_KEY,
++ .code = KEY_PAUSE,
++ .desc = "Hold",
++ .type = EV_KEY,
++ .debounce_interval = 100,
++ },
++};
++
++static struct gpio_keys_platform_data gta01_buttons_pdata = {
++ .buttons = gta01_buttons,
++ .nbuttons = ARRAY_SIZE(gta01_buttons),
++};
++
++static struct platform_device gta01_buttons_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .dev = {
++ .platform_data = >a01_buttons_pdata,
++ },
++};
++
++/* USB */
++
++static struct s3c2410_hcd_info gta01_usb_info = {
++ .port[0] = {
++ .flags = S3C_HCDFLG_USED,
++ },
++ .port[1] = {
++ .flags = 0,
++ },
++};
++
++static struct platform_device *gta01_devices[] __initdata = {
++ &s3c_device_ohci,
++ &s3c_device_lcd,
++ &s3c_device_wdt,
++ &s3c_device_i2c0,
++ &s3c_device_iis,
++ &s3c_device_sdi,
++ &s3c_device_usbgadget,
++ &s3c_device_nand,
++ &s3c_device_adc,
++ &s3c_device_ts,
++ &s3c_device_timer[0],
++ &s3c_device_timer[3],
++ >a01_bl_device,
++ >a01_buttons_device,
++ >a01_pm_gsm_dev,
++};
++
++static struct platform_device *gta01_pmu_child_devices[] __devinitdata = {
++ >a01_lcm_spigpio_device,
++};
++
++static void __devinit gta01_pmu_attach_child_devices(struct pcf50606 *pcf)
++{
++ size_t i;
++
++ for (i = 0; i < ARRAY_SIZE(gta01_pmu_child_devices); ++i)
++ gta01_pmu_child_devices[i]->dev.parent = pcf->dev;
++
++ platform_add_devices(gta01_pmu_child_devices,
++ ARRAY_SIZE(gta01_pmu_child_devices));
++}
++static void __init gta01_map_io(void)
++{
++ s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc));
++ s3c24xx_init_clocks(12*1000*1000);
++ s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs));
++}
++
++static irqreturn_t gta01_modem_irq(int irq, void *param)
++{
++ printk(KERN_DEBUG "GSM wakeup interrupt (IRQ %d)\n", irq);
++/* gta_gsm_interrupts++;*/
++ return IRQ_HANDLED;
++}
++
++static struct i2c_board_info gta01_i2c_devs[] __initdata = {
++ {
++ I2C_BOARD_INFO("pcf50606", 0x08),
++ .irq = GTA01Bv4_IRQ_PCF50606,
++ .platform_data = >a01_pcf_pdata,
++ },
++ {
++ I2C_BOARD_INFO("lm4857", 0x7c),
++ },
++ {
++ I2C_BOARD_INFO("wm8753", 0x1a),
++ },
++};
++
++static int __init gta01_init_gpio(void)
++{
++ int ret;
++
++ ret = gpio_request(GTA01_GPIO_USB_PULLUP, "udc pullup");
++
++ ret = gpio_direction_output(GTA01_GPIO_USB_PULLUP, 0);
++
++ ret = gpio_request(GTA01_GPIO_SDMMC_ON, "SD/MMC power");
++
++ ret = gpio_direction_output(GTA01_GPIO_SDMMC_ON, 1);
++
++ s3c2410_gpio_cfgpin(GTA01_GPIO_BACKLIGHT, S3C2410_GPB0_TOUT0);
++ if (S3C_SYSTEM_REV_ATAG == GTA01Bv4_SYSTEM_REV)
++ s3c2410_gpio_cfgpin(GTA01Bv4_GPIO_VIBRATOR_ON, S3C2410_GPB3_TOUT3);
++
++ return ret;
++}
++
++static void __init gta01_machine_init(void)
++{
++ int rc;
++
++ gta01_init_gpio();
++
++ if (S3C_SYSTEM_REV_ATAG != GTA01Bv4_SYSTEM_REV) {
++ gta01_vibrator_device = >a01_vibrator_device_bv2;
++ gta01_i2c_devs[0].irq = GTA01Bv2_IRQ_PCF50606;
++ }
++
++ s3c_ohci_set_platdata(>a01_usb_info);
++ s3c_device_nand.dev.platform_data = >a01_nand_info;
++ s3c_device_sdi.dev.platform_data = >a01_mmc_cfg;
++
++ s3c24xx_fb_set_platdata(>a01_lcd_cfg);
++
++ INIT_WORK(>a01_udc_vbus_drawer.work, __gta01_udc_vbus_draw);
++ s3c24xx_udc_set_platdata(>a01_udc_cfg);
++ s3c_i2c0_set_platdata(NULL);
++
++ s3c24xx_ts_set_platdata(>a01_ts_cfg);
++
++#if 0
++ switch (S3C_SYSTEM_REV_ATAG) {
++ case GTA01v3_SYSTEM_REV:
++ case GTA01v4_SYSTEM_REV:
++ /* just use the default (GTA01_IRQ_PCF50606) */
++ break;
++ case GTA01Bv2_SYSTEM_REV:
++ case GTA01Bv3_SYSTEM_REV:
++ /* just use the default (GTA01_IRQ_PCF50606) */
++ gta01_led_resources[0].start =
++ gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON;
++ break;
++ case GTA01Bv4_SYSTEM_REV:
++ gta01_i2c_devs[0].irq = GTA01Bv4_IRQ_PCF50606;
++ gta01_led_resources[0].start =
++ gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON;
++ break;
++ }
++#endif
++ mangle_pmu_pdata_by_system_rev();
++
++ i2c_register_board_info(0, gta01_i2c_devs, ARRAY_SIZE(gta01_i2c_devs));
++ spi_register_board_info(gta01_spi_board_info,
++ ARRAY_SIZE(gta01_spi_board_info));
++
++ platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices));
++/* platform_add_devices(gta01_vibrator_device, 1);*/
++
++ s3c_pm_init();
++
++ set_irq_type(GTA01_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
++ rc = request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, IRQF_DISABLED,
++ "modem", NULL);
++ enable_irq_wake(GTA01_IRQ_MODEM);
++
++ printk(KERN_DEBUG "Enabled GSM wakeup IRQ %d (rc=%d)\n",
++ GTA01_IRQ_MODEM, rc);
++
++ pm_power_off = >a01_power_off;
++}
++
++MACHINE_START(NEO1973_GTA01, "GTA01")
++ .boot_params = S3C2410_SDRAM_PA + 0x100,
++ .map_io = gta01_map_io,
++ .init_irq = s3c24xx_init_irq,
++ .init_machine = gta01_machine_init,
++ .timer = &s3c24xx_timer,
++MACHINE_END
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a0cb258..17459cb 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GPIO driver for the PCF50633");
+MODULE_LICENSE("GPL");
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index b99b8cb..e8c0b55 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -348,6 +348,13 @@ config INPUT_PWM_BEEPER
+ To compile this driver as a module, choose M here: the module will be
+ called pwm-beeper.
+
++config INPUT_PCF50606_PMU
++ tristate "PCF50606 PMU events"
++ depends on MFD_PCF50606
++ help
++ Say Y to include support for delivering PMU events via input
++ layer on NXP PCF50606.
++
+ config INPUT_GPIO_ROTARY_ENCODER
+ tristate "Rotary encoders connected to GPIO pins"
+ depends on GPIOLIB && GENERIC_GPIO
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index 1fe1f6c..4d5cea7 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+ obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
+ obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
+ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
++obj-$(CONFIG_INPUT_PCF50606_PMU) += pcf50606-input.o
+ obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
+ obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
+ obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
+diff --git a/drivers/input/misc/pcf50606-input.c b/drivers/input/misc/pcf50606-input.c
+new file mode 100644
+index 0000000..5078351
+--- /dev/null
++++ b/drivers/input/misc/pcf50606-input.c
+@@ -0,0 +1,138 @@
++/* Philips PCF50606 Input Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Matt Hsu, Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++#include <linux/slab.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++#define PCF50606_OOCS_ONKEY 0x01
++#define PCF50606_OOCS_EXTON 0x02
++
++#define PCF50606_OOCC2_ONKEYDB_NONE 0x00
++#define PCF50606_OOCC2_ONKEYDB_14ms 0x01
++#define PCF50606_OOCC2_ONKEYDB_62ms 0x02
++#define PCF50606_OOCC2_ONKEYDB_500ms 0x03
++#define PCF50606_OOCC2_EXTONDB_NONE 0x00
++#define PCF50606_OOCC2_EXTONDB_14ms 0x04
++#define PCF50606_OOCC2_EXTONDB_62ms 0x08
++#define PCF50606_OOCC2_EXTONDB_500ms 0x0c
++
++#define PCF50606_REG_OOCS 0x01
++
++struct pcf50606_input {
++ struct pcf50606 *pcf;
++ struct input_dev *input_dev;
++};
++
++static void pcf50606_input_irq(int irq, void *data)
++{
++ struct pcf50606_input *input;
++ int onkey_released;
++
++ input = data;
++ onkey_released = pcf50606_reg_read(input->pcf, PCF50606_REG_OOCS) &
++ PCF50606_OOCS_ONKEY;
++
++ if (irq == PCF50606_IRQ_ONKEYF && !onkey_released)
++ input_report_key(input->input_dev, KEY_POWER, 1);
++ else if (irq == PCF50606_IRQ_ONKEYR && onkey_released)
++ input_report_key(input->input_dev, KEY_POWER, 0);
++
++ input_sync(input->input_dev);
++}
++
++static int __devinit pcf50606_input_probe(struct platform_device *pdev)
++{
++ struct pcf50606_input *input;
++ struct input_dev *input_dev;
++ int ret;
++
++ input = kzalloc(sizeof(*input), GFP_KERNEL);
++ if (!input)
++ return -ENOMEM;
++
++ input_dev = input_allocate_device();
++ if (!input_dev) {
++ kfree(input);
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, input);
++ input->pcf = dev_to_pcf50606(pdev->dev.parent);
++ input->input_dev = input_dev;
++
++ input_dev->name = "PCF50606 PMU events";
++ input_dev->id.bustype = BUS_I2C;
++ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR);
++ set_bit(KEY_POWER, input_dev->keybit);
++
++ ret = input_register_device(input_dev);
++ if (ret) {
++ input_free_device(input_dev);
++ kfree(input);
++ return ret;
++ }
++ pcf50606_register_irq(input->pcf, PCF50606_IRQ_ONKEYR,
++ pcf50606_input_irq, input);
++ pcf50606_register_irq(input->pcf, PCF50606_IRQ_ONKEYF,
++ pcf50606_input_irq, input);
++
++ return 0;
++}
++
++static int __devexit pcf50606_input_remove(struct platform_device *pdev)
++{
++ struct pcf50606_input *input = platform_get_drvdata(pdev);
++
++ input_unregister_device(input->input_dev);
++ pcf50606_free_irq(input->pcf, PCF50606_IRQ_ONKEYR);
++ pcf50606_free_irq(input->pcf, PCF50606_IRQ_ONKEYF);
++
++ kfree(input);
++
++ return 0;
++}
++
++static struct platform_driver pcf50606_input_driver = {
++ .driver = {
++ .name = "pcf50606-input",
++ },
++ .probe = pcf50606_input_probe,
++ .remove = __devexit_p(pcf50606_input_remove),
++};
++
++static int __init pcf50606_input_init(void)
++{
++ return platform_driver_register(&pcf50606_input_driver);
++}
++module_init(pcf50606_input_init);
++
++static void __exit pcf50606_input_exit(void)
++{
++ platform_driver_unregister(&pcf50606_input_driver);
++}
++module_exit(pcf50606_input_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 input driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-input");
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 9556273..c5d9d40 100644
--- a/drivers/input/misc/pcf50633-input.c
pwm_free(leds_data[i].pwm);
}
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 3a1493b..fbe4ad9 100644
+index 3a1493b..c9f03ea 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -417,6 +417,7 @@ config MFD_WM8994
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
select MFD_CORE
+@@ -606,6 +608,22 @@ config MFD_VX855
+ VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
+ and/or vx855_gpio drivers for this to do anything useful.
+
++config MFD_PCF50606
++ tristate "Support for NXP PCF50606"
++ depends on I2C
++ help
++ Say yes here if you have NXP PCF50606 chip on your board.
++ This core driver provides register access and IRQ handling
++ facilities, and registers devices for the various functions
++ so that function-specific drivers can bind to them.
++
++config PCF50606_ADC
++ tristate "Support for NXP PCF50606 ADC"
++ depends on MFD_PCF50606
++ help
++ Say yes here if you want to include support for ADC in the
++ NXP PCF50606 chip.
++
+ endif # MFD_SUPPORT
+
+ menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index f54b365..86f5f85 100644
+index f54b365..33f7064 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
-@@ -65,7 +66,6 @@ obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o
+@@ -63,9 +64,10 @@ obj-$(CONFIG_MFD_MAX8925) += max8925.o
+ obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o
+
pcf50633-objs := pcf50633-core.o pcf50633-irq.o
++obj-$(CONFIG_MFD_PCF50606) += pcf50606-core.o
++obj-$(CONFIG_PCF50606_ADC) += pcf50606-adc.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
-obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
+MODULE_DESCRIPTION("Smedia Glamo 3362 core/resource driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo3362");
+diff --git a/drivers/mfd/pcf50606-adc.c b/drivers/mfd/pcf50606-adc.c
+new file mode 100644
+index 0000000..168d3b2
+--- /dev/null
++++ b/drivers/mfd/pcf50606-adc.c
+@@ -0,0 +1,278 @@
++/* Philips PCF50606 ADC Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green, Werner Almesberger and Matt Hsu
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * NOTE: This driver does not yet support subtractive ADC mode, which means
++ * you can do only one measurement per read request.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <linux/slab.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/adc.h>
++
++struct pcf50606_adc_request {
++ int mux;
++ int result;
++ void (*callback)(struct pcf50606 *, void *, int);
++ void *callback_param;
++
++ /* Used in case of sync requests */
++ struct completion completion;
++
++};
++
++#define PCF50606_MAX_ADC_FIFO_DEPTH 8
++
++struct pcf50606_adc {
++ struct pcf50606 *pcf;
++
++ /* Private stuff */
++ struct pcf50606_adc_request *queue[PCF50606_MAX_ADC_FIFO_DEPTH];
++ int queue_head;
++ int queue_tail;
++ struct mutex queue_mutex;
++};
++
++static inline struct pcf50606_adc *__to_adc(struct pcf50606 *pcf)
++{
++ return platform_get_drvdata(pcf->adc_pdev);
++}
++
++static void adc_setup(struct pcf50606 *pcf, int channel)
++{
++ channel &= PCF50606_ADCC2_ADCMUX_MASK;
++
++ /* start ADC conversion of selected channel */
++ pcf50606_reg_write(pcf, PCF50606_REG_ADCC2, channel |
++ PCF50606_ADCC2_ADCSTART | PCF50606_ADCC2_RES_10BIT);
++
++}
++
++static void trigger_next_adc_job_if_any(struct pcf50606 *pcf)
++{
++ struct pcf50606_adc *adc = __to_adc(pcf);
++ int head;
++
++ mutex_lock(&adc->queue_mutex);
++
++ head = adc->queue_head;
++
++ if (!adc->queue[head])
++ goto out;
++
++ adc_setup(pcf, adc->queue[head]->mux);
++out:
++ mutex_unlock(&adc->queue_mutex);
++}
++
++static int
++adc_enqueue_request(struct pcf50606 *pcf, struct pcf50606_adc_request *req)
++{
++ struct pcf50606_adc *adc = __to_adc(pcf);
++ int head, tail;
++
++ mutex_lock(&adc->queue_mutex);
++ head = adc->queue_head;
++ tail = adc->queue_tail;
++
++ if (adc->queue[tail]) {
++ mutex_unlock(&adc->queue_mutex);
++ return -EBUSY;
++ }
++
++ adc->queue[tail] = req;
++
++ adc->queue_tail =
++ (tail + 1) & (PCF50606_MAX_ADC_FIFO_DEPTH - 1);
++
++ mutex_unlock(&adc->queue_mutex);
++
++ trigger_next_adc_job_if_any(pcf);
++
++ return 0;
++}
++
++static void
++pcf50606_adc_sync_read_callback(struct pcf50606 *pcf, void *param, int result)
++{
++ struct pcf50606_adc_request *req;
++
++ /*We know here that the passed param is an adc_request object */
++ req = (struct pcf50606_adc_request *)param;
++
++ req->result = result;
++ complete(&req->completion);
++}
++
++int pcf50606_adc_sync_read(struct pcf50606 *pcf, int mux)
++{
++
++ struct pcf50606_adc_request *req;
++ int result;
++
++ /* req is freed when the result is ready, in irq handler*/
++ req = kzalloc(sizeof(*req), GFP_KERNEL);
++ if (!req)
++ return -ENOMEM;
++
++ req->mux = mux;
++ req->callback = pcf50606_adc_sync_read_callback;
++ req->callback_param = req;
++ init_completion(&req->completion);
++
++ adc_enqueue_request(pcf, req);
++
++ if (wait_for_completion_timeout(&req->completion, 5 * HZ) == 5 * HZ) {
++ dev_err(pcf->dev, "ADC read timed out \n");
++ }
++
++ result = req->result;
++
++ return result;
++}
++EXPORT_SYMBOL_GPL(pcf50606_adc_sync_read);
++
++int pcf50606_adc_async_read(struct pcf50606 *pcf, int mux,
++ void (*callback)(struct pcf50606 *, void *, int),
++ void *callback_param)
++{
++ struct pcf50606_adc_request *req;
++
++ /* req is freed when the result is ready, in pcf50606_work*/
++ req = kmalloc(sizeof(*req), GFP_KERNEL);
++ if (!req)
++ return -ENOMEM;
++
++ req->mux = mux;
++ req->callback = callback;
++ req->callback_param = callback_param;
++
++ adc_enqueue_request(pcf, req);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_adc_async_read);
++
++static int adc_result(struct pcf50606 *pcf)
++{
++ u16 ret = (pcf50606_reg_read(pcf, PCF50606_REG_ADCS1) << 2) |
++ (pcf50606_reg_read(pcf, PCF50606_REG_ADCS2) & 0x03);
++
++ dev_dbg(pcf->dev, "adc result = %d\n", ret);
++
++ return ret;
++}
++
++static void pcf50606_adc_irq(int irq, void *data)
++{
++ struct pcf50606_adc *adc = data;
++ struct pcf50606 *pcf = adc->pcf;
++ struct pcf50606_adc_request *req;
++ int head;
++
++ mutex_lock(&adc->queue_mutex);
++ head = adc->queue_head;
++
++ req = adc->queue[head];
++ if (WARN_ON(!req)) {
++ dev_err(pcf->dev, "pcf50606-adc irq: ADC queue empty!\n");
++ mutex_unlock(&adc->queue_mutex);
++ return;
++ }
++
++ adc->queue[head] = NULL;
++ adc->queue_head = (head + 1) &
++ (PCF50606_MAX_ADC_FIFO_DEPTH - 1);
++
++ mutex_unlock(&adc->queue_mutex);
++
++ req->callback(pcf, req->callback_param, adc_result(pcf));
++ kfree(req);
++
++ trigger_next_adc_job_if_any(pcf);
++}
++
++static int __devinit pcf50606_adc_probe(struct platform_device *pdev)
++{
++ struct pcf50606_adc *adc;
++
++ adc = kzalloc(sizeof(*adc), GFP_KERNEL);
++ if (!adc)
++ return -ENOMEM;
++
++ adc->pcf = dev_to_pcf50606(pdev->dev.parent);
++ platform_set_drvdata(pdev, adc);
++
++ pcf50606_register_irq(adc->pcf, PCF50606_IRQ_ADCRDY,
++ pcf50606_adc_irq, adc);
++
++ mutex_init(&adc->queue_mutex);
++
++ return 0;
++}
++
++static int __devexit pcf50606_adc_remove(struct platform_device *pdev)
++{
++ struct pcf50606_adc *adc = platform_get_drvdata(pdev);
++ int i, head;
++
++ pcf50606_free_irq(adc->pcf, PCF50606_IRQ_ADCRDY);
++
++ mutex_lock(&adc->queue_mutex);
++ head = adc->queue_head;
++
++ if (WARN_ON(adc->queue[head]))
++ dev_err(adc->pcf->dev,
++ "adc driver removed with request pending\n");
++
++ for (i = 0; i < PCF50606_MAX_ADC_FIFO_DEPTH; i++)
++ kfree(adc->queue[i]);
++
++ mutex_unlock(&adc->queue_mutex);
++ kfree(adc);
++
++ return 0;
++}
++
++struct platform_driver pcf50606_adc_driver = {
++ .driver = {
++ .name = "pcf50606-adc",
++ },
++ .probe = pcf50606_adc_probe,
++ .remove = __devexit_p(pcf50606_adc_remove),
++};
++
++static int __init pcf50606_adc_init(void)
++{
++ return platform_driver_register(&pcf50606_adc_driver);
++}
++module_init(pcf50606_adc_init);
++
++static void __exit pcf50606_adc_exit(void)
++{
++ platform_driver_unregister(&pcf50606_adc_driver);
++}
++module_exit(pcf50606_adc_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 adc driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-adc");
++
+diff --git a/drivers/mfd/pcf50606-core.c b/drivers/mfd/pcf50606-core.c
+new file mode 100644
+index 0000000..4f35acb
+--- /dev/null
++++ b/drivers/mfd/pcf50606-core.c
+@@ -0,0 +1,682 @@
++/* Philips PCF50606 Power Management Unit (PMU) driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Harald Welte <laforge@openmoko.org>
++ * Matt Hsu <matt@openmoko.org>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/sysfs.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/irq.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++static int __pcf50606_read(struct pcf50606 *pcf, uint8_t reg, int num, uint8_t *data)
++{
++ int ret;
++
++ ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
++ num, data);
++ if (ret < 0)
++ dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
++
++ return ret;
++}
++
++static int __pcf50606_write(struct pcf50606 *pcf, uint8_t reg, int num, uint8_t *data)
++{
++ int ret;
++
++ ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
++ num, data);
++ if (ret < 0)
++ dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
++
++ return ret;
++
++}
++
++/* Read a block of upto 32 regs */
++int pcf50606_read_block(struct pcf50606 *pcf, uint8_t reg,
++ int nr_regs, uint8_t *data)
++{
++ int ret;
++
++ mutex_lock(&pcf->lock);
++ ret = __pcf50606_read(pcf, reg, nr_regs, data);
++ mutex_unlock(&pcf->lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_read_block);
++
++/* Write a block of upto 32 regs */
++int pcf50606_write_block(struct pcf50606 *pcf , uint8_t reg,
++ int nr_regs, uint8_t *data)
++{
++ int ret;
++
++ mutex_lock(&pcf->lock);
++ ret = __pcf50606_write(pcf, reg, nr_regs, data);
++ mutex_unlock(&pcf->lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_write_block);
++
++uint8_t pcf50606_reg_read(struct pcf50606 *pcf, uint8_t reg)
++{
++ uint8_t val;
++
++ mutex_lock(&pcf->lock);
++ __pcf50606_read(pcf, reg, 1, &val);
++ mutex_unlock(&pcf->lock);
++
++ return val;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_read);
++
++int pcf50606_reg_write(struct pcf50606 *pcf, uint8_t reg, uint8_t val)
++{
++ int ret;
++
++ mutex_lock(&pcf->lock);
++ ret = __pcf50606_write(pcf, reg, 1, &val);
++ mutex_unlock(&pcf->lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_write);
++
++int pcf50606_reg_set_bit_mask(struct pcf50606 *pcf, uint8_t reg, uint8_t mask, uint8_t val)
++{
++ int ret;
++ uint8_t tmp;
++
++ val &= mask;
++
++ mutex_lock(&pcf->lock);
++ ret = __pcf50606_read(pcf, reg, 1, &tmp);
++ if (ret < 0)
++ goto out;
++
++ tmp &= ~mask;
++ tmp |= val;
++ ret = __pcf50606_write(pcf, reg, 1, &tmp);
++
++out:
++ mutex_unlock(&pcf->lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_set_bit_mask);
++
++int pcf50606_reg_clear_bits(struct pcf50606 *pcf, uint8_t reg, uint8_t val)
++{
++ int ret;
++ uint8_t tmp;
++
++ mutex_lock(&pcf->lock);
++ ret = __pcf50606_read(pcf, reg, 1, &tmp);
++ if (ret < 0)
++ goto out;
++
++ tmp &= ~val;
++ ret = __pcf50606_write(pcf, reg, 1, &tmp);
++
++out:
++ mutex_unlock(&pcf->lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(pcf50606_reg_clear_bits);
++
++/* sysfs attributes */
++static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct pcf50606 *pcf = dev_get_drvdata(dev);
++ uint8_t dump[16];
++ int n, n1, idx = 0;
++ char *buf1 = buf;
++ static uint8_t address_no_read[] = { /* must be ascending */
++ PCF50606_REG_INT1,
++ PCF50606_REG_INT2,
++ PCF50606_REG_INT3,
++ 0 /* terminator */
++ };
++
++ for (n = 0; n < 256; n += sizeof(dump)) {
++ for (n1 = 0; n1 < sizeof(dump); n1++)
++ if (n == address_no_read[idx]) {
++ idx++;
++ dump[n1] = 0x00;
++ } else
++ dump[n1] = pcf50606_reg_read(pcf, n + n1);
++
++ hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0);
++ buf1 += strlen(buf1);
++ *buf1++ = '\n';
++ *buf1 = '\0';
++ }
++
++ return buf1 - buf;
++}
++static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL);
++
++static ssize_t show_resume_reason(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct pcf50606 *pcf = dev_get_drvdata(dev);
++ int n;
++
++ n = sprintf(buf, "%02x%02x%02x\n",
++ pcf->resume_reason[0],
++ pcf->resume_reason[1],
++ pcf->resume_reason[2]);
++
++ return n;
++}
++static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL);
++
++static struct attribute *pcf_sysfs_entries[] = {
++ &dev_attr_dump_regs.attr,
++ &dev_attr_resume_reason.attr,
++ NULL,
++};
++
++static struct attribute_group pcf_attr_group = {
++ .name = NULL, /* put in device directory */
++ .attrs = pcf_sysfs_entries,
++};
++
++int pcf50606_register_irq(struct pcf50606 *pcf, int irq,
++ void (*handler) (int, void *), void *data)
++{
++ if (irq < 0 || irq > PCF50606_NUM_IRQ || !handler)
++ return -EINVAL;
++
++ if (WARN_ON(pcf->irq_handler[irq].handler))
++ return -EBUSY;
++
++ mutex_lock(&pcf->lock);
++ pcf->irq_handler[irq].handler = handler;
++ pcf->irq_handler[irq].data = data;
++ mutex_unlock(&pcf->lock);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_register_irq);
++
++int pcf50606_free_irq(struct pcf50606 *pcf, int irq)
++{
++ if (irq < 0 || irq > PCF50606_NUM_IRQ)
++ return -EINVAL;
++
++ mutex_lock(&pcf->lock);
++ pcf->irq_handler[irq].handler = NULL;
++ mutex_unlock(&pcf->lock);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_free_irq);
++
++static int __pcf50606_irq_mask_set(struct pcf50606 *pcf, int irq, uint8_t mask)
++{
++ uint8_t reg, bits, tmp;
++ int ret = 0, idx;
++
++ idx = irq >> 3;
++ reg = PCF50606_REG_INT1M + idx;
++ bits = 1 << (irq & 0x07);
++
++ mutex_lock(&pcf->lock);
++
++ if (mask) {
++ ret = __pcf50606_read(pcf, reg, 1, &tmp);
++ if (ret < 0)
++ goto out;
++
++ tmp |= bits;
++
++ ret = __pcf50606_write(pcf, reg, 1, &tmp);
++ if (ret < 0)
++ goto out;
++
++ pcf->mask_regs[idx] &= ~bits;
++ pcf->mask_regs[idx] |= bits;
++ } else {
++ ret = __pcf50606_read(pcf, reg, 1, &tmp);
++ if (ret < 0)
++ goto out;
++
++ tmp &= ~bits;
++
++ ret = __pcf50606_write(pcf, reg, 1, &tmp);
++ if (ret < 0)
++ goto out;
++
++ pcf->mask_regs[idx] &= ~bits;
++ }
++out:
++ mutex_unlock(&pcf->lock);
++
++ return ret;
++}
++
++int pcf50606_irq_mask(struct pcf50606 *pcf, int irq)
++{
++ dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
++
++ return __pcf50606_irq_mask_set(pcf, irq, 1);
++}
++EXPORT_SYMBOL_GPL(pcf50606_irq_mask);
++
++int pcf50606_irq_unmask(struct pcf50606 *pcf, int irq)
++{
++ dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
++
++ return __pcf50606_irq_mask_set(pcf, irq, 0);
++}
++EXPORT_SYMBOL_GPL(pcf50606_irq_unmask);
++
++int pcf50606_irq_mask_get(struct pcf50606 *pcf, int irq)
++{
++ uint8_t reg, bits;
++
++ reg = (irq / 8);
++ bits = (1 << (irq % 8));
++
++ return pcf->mask_regs[reg] & bits;
++}
++EXPORT_SYMBOL_GPL(pcf50606_irq_mask_get);
++
++static void pcf50606_irq_call_handler(struct pcf50606 *pcf,
++ int irq)
++{
++ if (pcf->irq_handler[irq].handler)
++ pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
++}
++
++#define PCF50606_ONKEY1S_TIMEOUT 8
++
++#define PCF50606_REG_MBCS1 0x2c
++
++static void pcf50606_irq_worker(struct work_struct *work)
++{
++ int ret;
++ struct pcf50606 *pcf;
++ uint8_t pcf_int[3], charger_status;
++ size_t i, j;
++
++ pcf = container_of(work, struct pcf50606, irq_work);
++
++ /* Read the 3 INT regs in one transaction */
++ ret = pcf50606_read_block(pcf, PCF50606_REG_INT1,
++ ARRAY_SIZE(pcf_int), pcf_int);
++ if (ret != ARRAY_SIZE(pcf_int)) {
++ dev_err(pcf->dev, "Error reading INT registers\n");
++
++ /*
++ * If this doesn't ACK the interrupt to the chip, we'll be
++ * called once again as we're level triggered.
++ */
++ goto out;
++ }
++
++ /* We immediately read the charger status. We thus make sure
++ * only one of CHGINS/CHGRM interrupt handlers are called */
++ if (pcf_int[1] & (PCF50606_INT2_CHGINS | PCF50606_INT2_CHGRM)) {
++ charger_status = pcf50606_reg_read(pcf, PCF50606_REG_MBCS1);
++ if (charger_status & (0x1 << 4))
++ pcf_int[1] &= ~PCF50606_INT2_CHGRM;
++ else
++ pcf_int[1] &= ~PCF50606_INT2_CHGINS;
++ }
++
++ dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x\n",
++ pcf_int[0], pcf_int[1], pcf_int[2]);
++
++ /* Some revisions of the chip don't have a 8s standby mode on
++ * ONKEY1S press. We try to manually do it in such cases. */
++ if (pcf_int[0] & PCF50606_INT1_SECOND && pcf->onkey1s_held) {
++ dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
++ pcf->onkey1s_held);
++ if (pcf->onkey1s_held++ == PCF50606_ONKEY1S_TIMEOUT)
++ if (pcf->pdata->force_shutdown)
++ pcf->pdata->force_shutdown(pcf);
++ }
++
++ if (pcf_int[0] & PCF50606_INT1_ONKEY1S) {
++ dev_info(pcf->dev, "ONKEY1S held\n");
++ pcf->onkey1s_held = 1 ;
++
++ /* Unmask IRQ_SECOND */
++ pcf50606_reg_clear_bits(pcf, PCF50606_REG_INT1M,
++ PCF50606_INT1_SECOND);
++
++ /* Unmask IRQ_ONKEYF */
++ pcf50606_reg_clear_bits(pcf, PCF50606_REG_INT1M,
++ PCF50606_INT1_ONKEYF);
++ }
++
++ if ((pcf_int[0] & PCF50606_INT1_ONKEYR) && pcf->onkey1s_held) {
++ pcf->onkey1s_held = 0;
++
++ /* Mask SECOND and ONKEYF interrupts */
++ if (pcf->mask_regs[0] & PCF50606_INT1_SECOND)
++ pcf50606_reg_set_bit_mask(pcf,
++ PCF50606_REG_INT1M,
++ PCF50606_INT1_SECOND,
++ PCF50606_INT1_SECOND);
++
++ if (pcf->mask_regs[0] & PCF50606_INT1_ONKEYF)
++ pcf50606_reg_set_bit_mask(pcf,
++ PCF50606_REG_INT1M,
++ PCF50606_INT1_ONKEYF,
++ PCF50606_INT1_ONKEYF);
++ }
++
++ /* Have we just resumed ? */
++ if (pcf->is_suspended) {
++
++ pcf->is_suspended = 0;
++
++ /* Set the resume reason filtering out non resumers */
++ for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
++ pcf->resume_reason[i] = pcf_int[i] &
++ pcf->pdata->resumers[i];
++
++ /* Make sure we don't pass on ONKEY events to
++ * userspace now */
++ pcf_int[1] &= ~(PCF50606_INT1_ONKEYR | PCF50606_INT1_ONKEYF);
++ }
++
++ for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
++ /* Unset masked interrupts */
++ pcf_int[i] &= ~pcf->mask_regs[i];
++
++ for (j = 0; j < 8 ; j++)
++ if (pcf_int[i] & (1 << j))
++ pcf50606_irq_call_handler(pcf, (i * 8) + j);
++ }
++
++out:
++ put_device(pcf->dev);
++ enable_irq(pcf->irq);
++}
++
++static irqreturn_t pcf50606_irq(int irq, void *data)
++{
++ struct pcf50606 *pcf = data;
++
++ get_device(pcf->dev);
++ disable_irq_nosync(pcf->irq);
++ schedule_work(&pcf->irq_work);
++
++ return IRQ_HANDLED;
++}
++
++static void
++pcf50606_client_dev_register(struct pcf50606 *pcf, const char *name,
++ struct platform_device **pdev)
++{
++ int ret;
++
++ *pdev = platform_device_alloc(name, -1);
++ if (!*pdev) {
++ dev_err(pcf->dev, "Falied to allocate %s\n", name);
++ return;
++ }
++
++ (*pdev)->dev.parent = pcf->dev;
++
++ ret = platform_device_add(*pdev);
++ if (ret) {
++ dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
++ platform_device_put(*pdev);
++ *pdev = NULL;
++ }
++}
++
++#ifdef CONFIG_PM
++static int pcf50606_suspend(struct i2c_client *client, pm_message_t state)
++{
++ int ret;
++ struct pcf50606 *pcf;
++ size_t i;
++ uint8_t res[3];
++
++ pcf = i2c_get_clientdata(client);
++
++ /* Make sure our interrupt handlers are not called
++ * henceforth */
++ disable_irq(pcf->irq);
++
++ /* Make sure that any running IRQ worker has quit */
++ cancel_work_sync(&pcf->irq_work);
++
++ /* Save the masks */
++ ret = pcf50606_read_block(pcf, PCF50606_REG_INT1M,
++ ARRAY_SIZE(pcf->suspend_irq_masks),
++ pcf->suspend_irq_masks);
++ if (ret < 0) {
++ dev_err(pcf->dev, "error saving irq masks\n");
++ goto out;
++ }
++
++ /* Write wakeup irq masks */
++ for (i = 0; i < ARRAY_SIZE(res); i++)
++ res[i] = ~pcf->pdata->resumers[i];
++
++ ret = pcf50606_write_block(pcf, PCF50606_REG_INT1M,
++ ARRAY_SIZE(res), &res[0]);
++ if (ret < 0) {
++ dev_err(pcf->dev, "error writing wakeup irq masks\n");
++ goto out;
++ }
++
++ pcf->is_suspended = 1;
++
++out:
++ return ret;
++}
++
++static int pcf50606_resume(struct i2c_client *client)
++{
++ struct pcf50606 *pcf;
++ int ret;
++
++ pcf = i2c_get_clientdata(client);
++
++ /* Write the saved mask registers */
++ ret = pcf50606_write_block(pcf, PCF50606_REG_INT1M,
++ ARRAY_SIZE(pcf->suspend_irq_masks),
++ pcf->suspend_irq_masks);
++ if (ret < 0)
++ dev_err(pcf->dev, "Error restoring saved suspend masks\n");
++
++ get_device(pcf->dev);
++
++ /*
++ * Clear any pending interrupts and set resume reason if any.
++ * This will leave with enable_irq()
++ */
++ pcf50606_irq_worker(&pcf->irq_work);
++
++ return 0;
++}
++#else
++#define pcf50606_suspend NULL
++#define pcf50606_resume NULL
++#endif
++
++static int pcf50606_probe(struct i2c_client *client,
++ const struct i2c_device_id *ids)
++{
++ int ret;
++ struct pcf50606 *pcf;
++ struct pcf50606_platform_data *pdata = client->dev.platform_data;
++ int i;
++ uint8_t version, variant;
++
++ if (!client->irq) {
++ dev_err(&client->dev, "Missing IRQ\n");
++ return -ENOENT;
++ }
++
++ pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
++ if (!pcf)
++ return -ENOMEM;
++
++ pcf->pdata = pdata;
++
++ mutex_init(&pcf->lock);
++
++ i2c_set_clientdata(client, pcf);
++ pcf->dev = &client->dev;
++ pcf->i2c_client = client;
++ pcf->irq = client->irq;
++
++ INIT_WORK(&pcf->irq_work, pcf50606_irq_worker);
++
++ version = pcf50606_reg_read(pcf, 0);
++ variant = pcf50606_reg_read(pcf, 1);
++
++ /* This test is always false, FIX it */
++ if (version < 0 || variant < 0) {
++ dev_err(pcf->dev, "Unable to probe pcf50606\n");
++ ret = -ENODEV;
++ goto err;
++ }
++
++ dev_info(pcf->dev, "Probed device version %d variant %d\n",
++ version, variant);
++ /* Enable all inteerupts except RTC SECOND */
++ pcf->mask_regs[0] = 0x40;
++ pcf50606_reg_write(pcf, PCF50606_REG_INT1M, pcf->mask_regs[0]);
++ pcf50606_reg_write(pcf, PCF50606_REG_INT2M, 0x00);
++ pcf50606_reg_write(pcf, PCF50606_REG_INT3M, 0x00);
++
++ ret = request_irq(client->irq, pcf50606_irq,
++ IRQF_TRIGGER_LOW, "pcf50606", pcf);
++
++ if (ret) {
++ dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
++ goto err;
++ }
++
++ pcf50606_client_dev_register(pcf, "pcf50606-input",
++ &pcf->input_pdev);
++ pcf50606_client_dev_register(pcf, "pcf50606-rtc",
++ &pcf->rtc_pdev);
++ pcf50606_client_dev_register(pcf, "pcf50606-mbc",
++ &pcf->mbc_pdev);
++ pcf50606_client_dev_register(pcf, "pcf50606-adc",
++ &pcf->adc_pdev);
++ pcf50606_client_dev_register(pcf, "pcf50606-wdt",
++ &pcf->wdt_pdev);
++ for (i = 0; i < PCF50606_NUM_REGULATORS; i++) {
++ struct platform_device *pdev;
++
++ pdev = platform_device_alloc("pcf50606-regltr", i);
++ if (!pdev) {
++ dev_err(pcf->dev, "Cannot create regulator %d\n", i);
++ continue;
++ }
++
++ pdev->dev.parent = pcf->dev;
++ platform_device_add_data(pdev, &pdata->reg_init_data[i],
++ sizeof(pdata->reg_init_data[i]));
++ pcf->regulator_pdev[i] = pdev;
++
++ platform_device_add(pdev);
++ }
++
++ if (enable_irq_wake(client->irq) < 0)
++ dev_info(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
++ "in this hardware revision\n", client->irq);
++
++ ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
++ if (ret)
++ dev_info(pcf->dev, "error creating sysfs entries\n");
++
++ if (pdata->probe_done)
++ pdata->probe_done(pcf);
++
++ return 0;
++
++err:
++ i2c_set_clientdata(client, NULL);
++ kfree(pcf);
++ return ret;
++}
++
++static int pcf50606_remove(struct i2c_client *client)
++{
++ struct pcf50606 *pcf = i2c_get_clientdata(client);
++ unsigned int i;
++
++ free_irq(pcf->irq, pcf);
++
++ platform_device_unregister(pcf->input_pdev);
++ platform_device_unregister(pcf->rtc_pdev);
++ platform_device_unregister(pcf->mbc_pdev);
++ platform_device_unregister(pcf->adc_pdev);
++
++ for (i = 0; i < PCF50606_NUM_REGULATORS; i++)
++ platform_device_unregister(pcf->regulator_pdev[i]);
++
++ i2c_set_clientdata(client, NULL);
++ kfree(pcf);
++
++ return 0;
++}
++
++static struct i2c_device_id pcf50606_id_table[] = {
++ {"pcf50606", 0x08},
++};
++
++static struct i2c_driver pcf50606_driver = {
++ .driver = {
++ .name = "pcf50606",
++ },
++ .id_table = pcf50606_id_table,
++ .probe = pcf50606_probe,
++ .remove = pcf50606_remove,
++ .suspend = pcf50606_suspend,
++ .resume = pcf50606_resume,
++};
++
++static int __init pcf50606_init(void)
++{
++ return i2c_add_driver(&pcf50606_driver);
++}
++module_init(pcf50606_init);
++
++static void pcf50606_exit(void)
++{
++ i2c_del_driver(&pcf50606_driver);
++}
++module_exit(pcf50606_exit);
++
++MODULE_DESCRIPTION("I2C chip driver for NXP PCF50606 PMU");
++MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
++MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index aed0d2a..54a78c1 100644
--- a/drivers/mfd/pcf50633-adc.c
mutex_lock(&adc->queue_mutex);
head = adc->queue_head;
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
-index 501ce13..0fe84c9 100644
+index 501ce13..f9ad427 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -23,6 +23,8 @@
#include <linux/mfd/pcf50633/core.h>
static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-@@ -208,55 +210,190 @@ static struct attribute_group pcf_attr_group = {
+@@ -208,55 +210,192 @@ static struct attribute_group pcf_attr_group = {
.attrs = pcf_sysfs_entries,
};
+#define PCF50633_CELL(_name) \
+ { \
+ .name = _name, \
++ .id = -1, \
+ } \
+
+#define PCF50633_CELL_RESOURCES(_name, _resources) \
+ { \
+ .name = _name, \
++ .id = -1, \
+ .num_resources = ARRAY_SIZE(_resources), \
+ .resources = _resources, \
+ } \
int version, variant;
if (!client->irq) {
-@@ -289,34 +426,11 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
+@@ -289,34 +428,11 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
pcf50633_irq_init(pcf, client->irq);
}
ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
-@@ -337,19 +451,11 @@ err_free:
+@@ -337,19 +453,11 @@ err_free:
static int __devexit pcf50633_remove(struct i2c_client *client)
{
struct pcf50633 *pcf = i2c_get_clientdata(client);
kfree(pcf);
-@@ -364,12 +470,11 @@ static struct i2c_device_id pcf50633_id_table[] = {
+@@ -364,12 +472,11 @@ static struct i2c_device_id pcf50633_id_table[] = {
static struct i2c_driver pcf50633_driver = {
.driver = {
.name = "pcf50633",
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.mode = NAND_ECC_HW;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
-index 60d83d9..dc1792e 100644
+index 60d83d9..f95b1c3 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -117,10 +117,25 @@ config BATTERY_BQ20Z75
config BATTERY_DA9030
tristate "DA9030 battery driver"
depends on PMIC_DA903X
-@@ -185,4 +200,10 @@ config CHARGER_TWL4030
+@@ -148,6 +163,12 @@ config BATTERY_S3C_ADC
+ help
+ Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
++config CHARGER_PCF50606
++ tristate "Support for NXP PCF50606 MBC"
++ depends on MFD_PCF50606
++ help
++ Say Y to include support for NXP PCF50606 Battery Charger.
++
+ config CHARGER_PCF50633
+ tristate "NXP PCF50633 MBC"
+ depends on MFD_PCF50633
+@@ -185,4 +206,10 @@ config CHARGER_TWL4030
help
Say Y here to enable support for TWL4030 Battery Charge Interface.
+
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
-index c75772e..021eab9 100644
+index c75772e..9c49477 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
-@@ -32,3 +32,4 @@ obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
+@@ -27,8 +27,10 @@ obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
+ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
+ obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
+ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
++obj-$(CONFIG_CHARGER_PCF50606) += pcf50606-charger.o
+ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
+ obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
}
module_exit(bq27x00_battery_exit);
+diff --git a/drivers/power/pcf50606-charger.c b/drivers/power/pcf50606-charger.c
+new file mode 100644
+index 0000000..f67e8b5
+--- /dev/null
++++ b/drivers/power/pcf50606-charger.c
+@@ -0,0 +1,261 @@
++/* NXP PCF50606 Main Battery Charger Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/device.h>
++#include <linux/sysfs.h>
++#include <linux/platform_device.h>
++#include <linux/power_supply.h>
++#include <linux/slab.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/mbc.h>
++
++struct pcf50606_mbc {
++ struct pcf50606 *pcf;
++
++ int charger_online;
++ struct power_supply charger;
++};
++
++int pcf50606_charge_fast(struct pcf50606 *pcf, int on)
++{
++ struct pcf50606_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
++
++ /*
++ * This is a fix to work around boot-time ordering problems if
++ * the s3c2410_udc is initialized before the pcf50606 mbc is
++ * ready.
++ */
++ if (!mbc)
++ return -ENODEV;
++
++ if (on) {
++ pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_AUTOFST,
++ PCF50606_MBCC1_AUTOFST);\
++ mbc->charger_online = 1;
++ } else {
++ /* disable automatic fast-charge */
++ pcf50606_reg_clear_bits(pcf, PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_AUTOFST);
++ /* switch to idle mode to abort existing charge process */
++ pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_MBCC1,
++ PCF50606_MBCC1_CHGMOD_MASK,
++ PCF50606_MBCC1_CHGMOD_IDLE);
++ mbc->charger_online = 0;
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(pcf50606_charge_fast);
++
++static const char *charge_mode_descs[] = {
++ "qualification",
++ "pre",
++ "trickle",
++ "fast_cccv",
++ "idle",
++};
++
++static ssize_t
++show_charge_mode(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct pcf50606_mbc *mbc = dev_get_drvdata(dev);
++ const char **desc = charge_mode_descs;
++
++ uint8_t charge_mode = pcf50606_reg_read(mbc->pcf, PCF50606_REG_MBCC1);
++ charge_mode &= PCF50606_MBCC1_CHGMOD_MASK;
++ switch (charge_mode) {
++ case PCF50606_MBCC1_CHGMOD_IDLE:
++ ++desc;
++ case PCF50606_MBCC1_CHGMOD_FAST_CCCV:
++ ++desc;
++ case PCF50606_MBCC1_CHGMOD_TRICKLE:
++ ++desc;
++ case PCF50606_MBCC1_CHGMOD_PRE:
++ ++desc;
++ case PCF50606_MBCC1_CHGMOD_QUAL:
++ return sprintf(buf, "%s\n", *desc);
++ break;
++ default:
++ return sprintf(buf, "unkown: %d\n", charge_mode);
++ break;
++ }
++}
++
++static ssize_t set_charge_mode(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct pcf50606_mbc *mbc = dev_get_drvdata(dev);
++ uint8_t mbcc1 = pcf50606_reg_read(mbc->pcf, PCF50606_REG_MBCC1);
++
++ mbcc1 &= ~PCF50606_MBCC1_CHGMOD_MASK;
++
++ if (!strcmp(buf, "qualification"))
++ mbcc1 |= PCF50606_MBCC1_CHGMOD_QUAL;
++ else if (!strcmp(buf, "pre"))
++ mbcc1 |= PCF50606_MBCC1_CHGMOD_PRE;
++ else if (!strcmp(buf, "trickle"))
++ mbcc1 |= PCF50606_MBCC1_CHGMOD_TRICKLE;
++ else if (!strcmp(buf, "fast_cccv"))
++ mbcc1 |= PCF50606_MBCC1_CHGMOD_FAST_CCCV;
++ /* We don't allow the other fast modes for security reasons */
++ else if (!strcmp(buf, "idle"))
++ mbcc1 |= PCF50606_MBCC1_CHGMOD_IDLE;
++ else
++ return -EINVAL;
++
++ pcf50606_reg_write(mbc->pcf, PCF50606_REG_MBCC1, mbcc1);
++
++ return count;
++}
++
++static DEVICE_ATTR(charge_mode, S_IRUGO | S_IWUSR, show_charge_mode, set_charge_mode);
++
++static void
++pcf50606_mbc_irq_handler(int irq, void *data)
++{
++ struct pcf50606_mbc *mbc = data;
++
++ power_supply_changed(&mbc->charger);
++
++ if (mbc->pcf->pdata->mbc_event_callback)
++ mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
++}
++
++static int charger_get_property(struct power_supply *psy,
++ enum power_supply_property psp,
++ union power_supply_propval *val)
++{
++ struct pcf50606_mbc *mbc = container_of(psy, struct pcf50606_mbc, charger);
++ int ret = 0;
++
++ switch (psp) {
++ case POWER_SUPPLY_PROP_ONLINE:
++ val->intval = mbc->charger_online;
++ break;
++ default:
++ ret = -EINVAL;
++ break;
++ }
++ return ret;
++}
++
++static enum power_supply_property power_props[] = {
++ POWER_SUPPLY_PROP_ONLINE,
++};
++
++static const uint8_t mbc_irq_handlers[] = {
++ PCF50606_IRQ_CHGINS,
++ PCF50606_IRQ_CHGRM,
++ PCF50606_IRQ_CHGFOK,
++ PCF50606_IRQ_CHGERR,
++ PCF50606_IRQ_CHGFRDY,
++ PCF50606_IRQ_CHGPROT,
++};
++
++static int __devinit pcf50606_mbc_probe(struct platform_device *pdev)
++{
++ struct pcf50606_mbc *mbc;
++ int ret;
++ size_t i;
++ uint8_t oocs;
++
++ mbc = kzalloc(sizeof(*mbc), GFP_KERNEL);
++ if (!mbc)
++ return -ENOMEM;
++
++ mbc->pcf = dev_to_pcf50606(pdev->dev.parent);
++
++ mbc->charger.name = "charger";
++ mbc->charger.type = POWER_SUPPLY_TYPE_MAINS;
++ mbc->charger.properties = power_props;
++ mbc->charger.num_properties = ARRAY_SIZE(power_props);
++ mbc->charger.get_property = &charger_get_property;
++ mbc->charger.supplied_to = mbc->pcf->pdata->batteries;
++ mbc->charger.num_supplicants = mbc->pcf->pdata->num_batteries;
++
++ ret = power_supply_register(&pdev->dev, &mbc->charger);
++ if (ret) {
++ dev_err(mbc->pcf->dev, "failed to register charger\n");
++ kfree(mbc);
++ return ret;
++ }
++
++ /* Set up IRQ handlers */
++ for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
++ pcf50606_register_irq(mbc->pcf, mbc_irq_handlers[i],
++ pcf50606_mbc_irq_handler, mbc);
++
++ ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_charge_mode.attr);
++ if (ret)
++ dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
++
++ oocs = pcf50606_reg_read(mbc->pcf, PCF50606_REG_OOCS);
++ if (oocs & PCF50606_OOCS_CHGOK)
++ pcf50606_mbc_irq_handler(PCF50606_IRQ_CHGINS, mbc);
++
++ platform_set_drvdata(pdev, mbc);
++
++ return 0;
++}
++
++static int __devexit pcf50606_mbc_remove(struct platform_device *pdev)
++{
++ struct pcf50606_mbc *mbc = platform_get_drvdata(pdev);
++ size_t i;
++
++ /* Remove IRQ handlers */
++ for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
++ pcf50606_free_irq(mbc->pcf, mbc_irq_handlers[i]);
++
++ power_supply_unregister(&mbc->charger);
++
++ platform_set_drvdata(pdev, NULL);
++ kfree(mbc);
++
++ return 0;
++}
++
++static struct platform_driver pcf50606_mbc_driver = {
++ .driver = {
++ .name = "pcf50606-mbc",
++ .owner = THIS_MODULE,
++ },
++ .probe = pcf50606_mbc_probe,
++ .remove = __devexit_p(pcf50606_mbc_remove),
++};
++
++static int __init pcf50606_mbc_init(void)
++{
++ return platform_driver_register(&pcf50606_mbc_driver);
++}
++module_init(pcf50606_mbc_init);
++
++static void __exit pcf50606_mbc_exit(void)
++{
++ platform_driver_unregister(&pcf50606_mbc_driver);
++}
++module_exit(pcf50606_mbc_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 mbc driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-mbc");
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index 4fa52e1..4d16869 100644
--- a/drivers/power/pcf50633-charger.c
- pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
+ pcf50633_mbc_irq_handler(mbc->irqs[PCF50633_MBC_IRQ_ADPINS], mbc);
+
-+ pcf->mbc = mbc;
-
- return 0;
++ pcf->mbc = mbc;
+
+ return 0;
++
++err_free_irq:
++ for (--i; i >= 0; --i)
++ free_irq(mbc->irqs[i], mbc);
++ sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
++err_unregister_ac:
++ power_supply_unregister(&mbc->ac);
++err_unregister_usb:
++ power_supply_unregister(&mbc->usb);
++err_unregister_adapter:
++ power_supply_unregister(&mbc->adapter);
++err_free:
++ kfree(mbc);
++
++ return ret;
+ }
+
+ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
+@@ -452,9 +516,11 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
+ struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
+ int i;
+
++ mbc->pcf->mbc = NULL;
++
+ /* Remove IRQ handlers */
+- for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+- pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
++ for (i = PCF50633_MBC_NUM_IRQS - 1; i >= 0; --i)
++ free_irq(mbc->irqs[i], mbc);
+
+ sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
+ power_supply_unregister(&mbc->usb);
+diff --git a/drivers/power/platform_battery.c b/drivers/power/platform_battery.c
+new file mode 100644
+index 0000000..a5c9f35
+--- /dev/null
++++ b/drivers/power/platform_battery.c
+@@ -0,0 +1,120 @@
++/*
++ * Driver for platform battery
++ *
++ * Copyright (c) Paul Fertser <fercerpav@gmail.com>
++ * Inspired by Balaji Rao <balajirrao@openmoko.org>
++ *
++ * This driver can be used for dumb batteries when all knowledge about
++ * their state belongs to the platform that does necessary ADC readings,
++ * conversions, guessimations etc.
++ *
++ * Use consistent with the GNU GPL is permitted, provided that this
++ * copyright notice is preserved in its entirety in all copies and derived
++ * works.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/power_supply.h>
++#include <linux/slab.h>
++#include <linux/workqueue.h>
++
++#include <linux/delay.h>
++#include <linux/platform_battery.h>
++
++struct platform_battery {
++ struct power_supply psy;
++ struct platform_bat_platform_data *pdata;
++};
++
++static int platform_bat_get_property(struct power_supply *psy,
++ enum power_supply_property psp,
++ union power_supply_propval *val)
++{
++ struct platform_battery *bat =
++ container_of(psy, struct platform_battery, psy);
++ size_t i;
++ int present=1;
++
++ if (bat->pdata->is_present)
++ present = bat->pdata->is_present();
++
++ if (psp != POWER_SUPPLY_PROP_PRESENT && !present)
++ return -ENODEV;
++
++ for (i = 0; i < psy->num_properties; i++)
++ if (psy->properties[i] == psp) {
++ val->intval = bat->pdata->get_property[i]();
++ return 0;
++ }
++
++ return -EINVAL;
++}
++
++static void platform_bat_ext_changed(struct power_supply *psy)
++{
++ struct platform_battery *bat =
++ container_of(psy, struct platform_battery, psy);
++ power_supply_changed(&bat->psy);
++}
++
++static int platform_battery_probe(struct platform_device *pdev)
++{
++ struct platform_battery *platform_bat;
++ struct platform_bat_platform_data *pdata =
++ (struct platform_bat_platform_data *)pdev->dev.platform_data;
++
++ platform_bat = kzalloc(sizeof(*platform_bat), GFP_KERNEL);
++ if (!platform_bat)
++ return -ENOMEM;
++
++ if (pdata->name)
++ platform_bat->psy.name = pdata->name;
++ else
++ platform_bat->psy.name = dev_name(&pdev->dev);
++ platform_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
++ platform_bat->psy.properties = pdata->properties;
++ platform_bat->psy.num_properties = pdata->num_properties;
++ platform_bat->psy.get_property = platform_bat_get_property;
++ platform_bat->psy.external_power_changed = platform_bat_ext_changed;
++
++ platform_bat->pdata = pdata;
++ platform_set_drvdata(pdev, platform_bat);
++ power_supply_register(&pdev->dev, &platform_bat->psy);
++
++ return 0;
++}
++
++static int platform_battery_remove(struct platform_device *pdev)
++{
++ struct platform_battery *bat = platform_get_drvdata(pdev);
++
++ power_supply_unregister(&bat->psy);
++ kfree(bat);
++
++ return 0;
++}
++
++static struct platform_driver platform_battery_driver = {
++ .driver = {
++ .name = "platform_battery",
++ },
++ .probe = platform_battery_probe,
++ .remove = platform_battery_remove,
++};
++
++static int __init platform_battery_init(void)
++{
++ return platform_driver_register(&platform_battery_driver);
++}
++module_init(platform_battery_init);
++
++static void __exit platform_battery_exit(void)
++{
++ platform_driver_unregister(&platform_battery_driver);
++}
++module_exit(platform_battery_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Paul Fertser <fercerpav@gmail.com>");
++MODULE_DESCRIPTION("platform battery driver");
+diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
+index dd30e88..a618a0a 100644
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -250,5 +250,12 @@ config REGULATOR_TPS6586X
+ help
+ This driver supports TPS6586X voltage regulator chips.
+
++config REGULATOR_PCF50606
++ bool "PCF50606 regulator driver"
++ depends on MFD_PCF50606
++ help
++ Say Y here to support the voltage regulators and convertors
++ on PCF50606
++
+ endif
+
+diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
+index bff8157..111c09c 100644
+--- a/drivers/regulator/Makefile
++++ b/drivers/regulator/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
+ obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
+ obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
+ obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
++obj-$(CONFIG_REGULATOR_PCF50606) += pcf50606-regulator.o
+ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+ obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
+ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
+diff --git a/drivers/regulator/pcf50606-regulator.c b/drivers/regulator/pcf50606-regulator.c
+new file mode 100644
+index 0000000..ae3193f
+--- /dev/null
++++ b/drivers/regulator/pcf50606-regulator.c
+@@ -0,0 +1,358 @@
++/* NXP PCF50606 PMIC Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte and Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/mfd/pcf50606/pmic.h>
++
++#define PCF50606_REGULATOR(_name, _id) \
++ { \
++ .name = _name, \
++ .id = _id, \
++ .ops = &pcf50606_regulator_ops, \
++ .type = REGULATOR_VOLTAGE, \
++ .owner = THIS_MODULE, \
++ }
++
++static const uint8_t pcf50606_regulator_registers[PCF50606_NUM_REGULATORS] = {
++ [PCF50606_REGULATOR_DCD] = PCF50606_REG_DCDC1,
++ [PCF50606_REGULATOR_DCDE] = PCF50606_REG_DCDEC1,
++ [PCF50606_REGULATOR_DCUD] = PCF50606_REG_DCUDC1,
++ [PCF50606_REGULATOR_D1REG] = PCF50606_REG_D1REGC1,
++ [PCF50606_REGULATOR_D2REG] = PCF50606_REG_D2REGC1,
++ [PCF50606_REGULATOR_D3REG] = PCF50606_REG_D3REGC1,
++ [PCF50606_REGULATOR_LPREG] = PCF50606_REG_LPREGC1,
++ [PCF50606_REGULATOR_IOREG] = PCF50606_REG_IOREGC,
++};
++
++static uint8_t dcudc_voltage(unsigned int millivolts)
++{
++ if (millivolts <= 900)
++ return 0;
++ else if (millivolts <= 3300)
++ return (millivolts - 900) / 300;
++ else if (millivolts < 4000)
++ return 0x0f;
++ else if (millivolts <= 5500)
++ return (millivolts - 4000) / 100;
++
++ return 0x1f;
++}
++
++static unsigned int dcudc_2voltage(uint8_t bits)
++{
++ bits &= 0x1f;
++ if (bits < 0x08)
++ return 900 + bits * 300;
++ else if (bits < 0x10)
++ return 3300;
++ else
++ return 4000 + (bits & 0xf) * 100;
++}
++
++static uint8_t dcdec_voltage(unsigned int millivolts)
++{
++ if (millivolts < 900)
++ return 0;
++ else if (millivolts > 3300)
++ return 0x0f;
++
++ return (millivolts - 900) / 300;
++}
++
++static unsigned int dcdec_2voltage(uint8_t bits)
++{
++ bits &= 0x0f;
++ return 900 + bits * 300;
++}
++
++static uint8_t dcdc_voltage(unsigned int millivolts)
++{
++ if (millivolts < 900)
++ return 0;
++ else if (millivolts > 3600)
++ return 0x1f;
++
++ if (millivolts < 1500)
++ return (millivolts - 900) / 25;
++ else
++ return 0x18 + (millivolts - 1500) / 300;
++}
++
++static unsigned int dcdc_2voltage(uint8_t bits)
++{
++ bits &= 0x1f;
++ if ((bits & 0x18) == 0x18)
++ return 1500 + ((bits & 0x7) * 300);
++ else
++ return 900 + (bits * 25);
++}
++
++static uint8_t dx_voltage(unsigned int millivolts)
++{
++ if (millivolts < 900)
++ return 0;
++ else if (millivolts > 3300)
++ return 0x18;
++
++ return (millivolts - 900) / 100;
++}
++
++static unsigned int dx_2voltage(uint8_t bits)
++{
++ bits &= 0x1f;
++ return 900 + (bits * 100);
++}
++
++static int pcf50606_regulator_set_voltage(struct regulator_dev *rdev,
++ int min_uV, int max_uV)
++{
++ struct pcf50606 *pcf;
++ int regulator_id, millivolts;
++ uint8_t volt_bits, regnr;
++
++ pcf = rdev_get_drvdata(rdev);
++
++ regulator_id = rdev_get_id(rdev);
++
++ millivolts = min_uV / 1000;
++
++ switch (regulator_id) {
++ case PCF50606_REGULATOR_DCD:
++ volt_bits = dcdc_voltage(millivolts);
++ regnr = PCF50606_REG_DCDC1;
++ break;
++ case PCF50606_REGULATOR_DCDE:
++ volt_bits = dcdec_voltage(millivolts);
++ regnr = PCF50606_REG_DCDEC1;
++ break;
++ case PCF50606_REGULATOR_DCUD:
++ volt_bits = dcudc_voltage(millivolts);
++ regnr = PCF50606_REG_DCUDC1;
++ break;
++ case PCF50606_REGULATOR_D1REG:
++ case PCF50606_REGULATOR_D2REG:
++ case PCF50606_REGULATOR_D3REG:
++ regnr = PCF50606_REG_D1REGC1 +
++ (regulator_id - PCF50606_REGULATOR_D1REG);
++ volt_bits = dx_voltage(millivolts);
++ break;
++ case PCF50606_REGULATOR_LPREG:
++ volt_bits = dx_voltage(millivolts);
++ regnr = PCF50606_REG_LPREGC1;
++ break;
++ case PCF50606_REGULATOR_IOREG:
++ if (millivolts < 1800)
++ return -EINVAL;
++ volt_bits = dx_voltage(millivolts);
++ regnr = PCF50606_REG_IOREGC;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return pcf50606_reg_set_bit_mask(pcf, regnr, 0x1f, volt_bits);
++}
+
-+err_free_irq:
-+ for (--i; i >= 0; --i)
-+ free_irq(mbc->irqs[i], mbc);
-+ sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
-+err_unregister_ac:
-+ power_supply_unregister(&mbc->ac);
-+err_unregister_usb:
-+ power_supply_unregister(&mbc->usb);
-+err_unregister_adapter:
-+ power_supply_unregister(&mbc->adapter);
-+err_free:
-+ kfree(mbc);
++static int pcf50606_regulator_get_voltage(struct regulator_dev *rdev)
++{
++ struct pcf50606 *pcf;
++ uint8_t volt_bits, regnr;
++ int regulator_id;
++ int voltage;
+
-+ return ret;
- }
-
- static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
-@@ -452,9 +516,11 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
- struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
- int i;
-
-+ mbc->pcf->mbc = NULL;
++ pcf = rdev_get_drvdata(rdev);
+
- /* Remove IRQ handlers */
-- for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
-- pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
-+ for (i = PCF50633_MBC_NUM_IRQS - 1; i >= 0; --i)
-+ free_irq(mbc->irqs[i], mbc);
-
- sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
- power_supply_unregister(&mbc->usb);
-diff --git a/drivers/power/platform_battery.c b/drivers/power/platform_battery.c
-new file mode 100644
-index 0000000..a5c9f35
---- /dev/null
-+++ b/drivers/power/platform_battery.c
-@@ -0,0 +1,120 @@
-+/*
-+ * Driver for platform battery
-+ *
-+ * Copyright (c) Paul Fertser <fercerpav@gmail.com>
-+ * Inspired by Balaji Rao <balajirrao@openmoko.org>
-+ *
-+ * This driver can be used for dumb batteries when all knowledge about
-+ * their state belongs to the platform that does necessary ADC readings,
-+ * conversions, guessimations etc.
-+ *
-+ * Use consistent with the GNU GPL is permitted, provided that this
-+ * copyright notice is preserved in its entirety in all copies and derived
-+ * works.
-+ */
++ regulator_id = rdev_get_id(rdev);
+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/power_supply.h>
-+#include <linux/slab.h>
-+#include <linux/workqueue.h>
++ switch (regulator_id) {
++ case PCF50606_REGULATOR_DCD:
++ volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_DCDC1) & 0x1f;
++ voltage = dcdc_2voltage(volt_bits);
++ break;
++ case PCF50606_REGULATOR_DCDE:
++ volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_DCDEC1) & 0x0f;
++ voltage = dcdec_2voltage(volt_bits);
++ break;
++ case PCF50606_REGULATOR_DCUD:
++ volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_DCUDC1) & 0x1f;
++ voltage = dcudc_2voltage(volt_bits);
++ break;
++ case PCF50606_REGULATOR_D1REG:
++ case PCF50606_REGULATOR_D2REG:
++ case PCF50606_REGULATOR_D3REG:
++ regnr = PCF50606_REG_D1REGC1 + (regulator_id - PCF50606_REGULATOR_D1REG);
++ volt_bits = pcf50606_reg_read(pcf, regnr) & 0x1f;
++ if (volt_bits > 0x18)
++ volt_bits = 0x18;
++ voltage = dx_2voltage(volt_bits);
++ break;
++ case PCF50606_REGULATOR_LPREG:
++ volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_LPREGC1) & 0x1f;
++ if (volt_bits > 0x18)
++ volt_bits = 0x18;
++ voltage = dx_2voltage(volt_bits);
++ break;
++ case PCF50606_REGULATOR_IOREG:
++ volt_bits = pcf50606_reg_read(pcf, PCF50606_REG_IOREGC) & 0x1f;
++ if (volt_bits > 0x18)
++ volt_bits = 0x18;
++ voltage = dx_2voltage(volt_bits);
++ break;
++ default:
++ return -EINVAL;
++ }
+
-+#include <linux/delay.h>
-+#include <linux/platform_battery.h>
++ return voltage * 1000;
++}
+
-+struct platform_battery {
-+ struct power_supply psy;
-+ struct platform_bat_platform_data *pdata;
-+};
++static int pcf50606_regulator_enable(struct regulator_dev *rdev)
++{
++ struct pcf50606 *pcf = rdev_get_drvdata(rdev);
++ int regulator_id;
++ uint8_t regnr;
+
-+static int platform_bat_get_property(struct power_supply *psy,
-+ enum power_supply_property psp,
-+ union power_supply_propval *val)
++ regulator_id = rdev_get_id(rdev);
++
++ regnr = pcf50606_regulator_registers[regulator_id];
++
++ return pcf50606_reg_set_bit_mask(pcf, regnr, 0xe0, 0xe0);
++}
++
++static int pcf50606_regulator_disable(struct regulator_dev *rdev)
+{
-+ struct platform_battery *bat =
-+ container_of(psy, struct platform_battery, psy);
-+ size_t i;
-+ int present=1;
++ struct pcf50606 *pcf = rdev_get_drvdata(rdev);
++ int regulator_id;
++ uint8_t regnr;
+
-+ if (bat->pdata->is_present)
-+ present = bat->pdata->is_present();
++ regulator_id = rdev_get_id(rdev);
+
-+ if (psp != POWER_SUPPLY_PROP_PRESENT && !present)
-+ return -ENODEV;
++ /* IOREG cannot be powered off since it powers the PMU I2C */
++ if (regulator_id == PCF50606_REGULATOR_IOREG)
++ return -EINVAL;
+
-+ for (i = 0; i < psy->num_properties; i++)
-+ if (psy->properties[i] == psp) {
-+ val->intval = bat->pdata->get_property[i]();
-+ return 0;
-+ }
++ regnr = pcf50606_regulator_registers[regulator_id];
+
-+ return -EINVAL;
++ return pcf50606_reg_set_bit_mask(pcf, regnr, 0xe0, 0);
+}
+
-+static void platform_bat_ext_changed(struct power_supply *psy)
++static int pcf50606_regulator_is_enabled(struct regulator_dev *rdev)
+{
-+ struct platform_battery *bat =
-+ container_of(psy, struct platform_battery, psy);
-+ power_supply_changed(&bat->psy);
++ struct pcf50606 *pcf = rdev_get_drvdata(rdev);
++ int regulator_id = rdev_get_id(rdev);
++ uint8_t regnr, val;
++
++ regulator_id = rdev_get_id(rdev);
++
++ /* the *ENA register is always one after the *OUT register */
++ regnr = pcf50606_regulator_registers[regulator_id];
++ val = (pcf50606_reg_read(pcf, regnr) & 0xe0) >> 5;
++
++ /* PWREN1 = 1, PWREN2 = 1, see table 16 of datasheet */
++ if (val == 0 || val == 5)
++ return 0;
++
++ return 1;
+}
+
-+static int platform_battery_probe(struct platform_device *pdev)
++static struct regulator_ops pcf50606_regulator_ops = {
++ .set_voltage = pcf50606_regulator_set_voltage,
++ .get_voltage = pcf50606_regulator_get_voltage,
++ .enable = pcf50606_regulator_enable,
++ .disable = pcf50606_regulator_disable,
++ .is_enabled = pcf50606_regulator_is_enabled,
++};
++
++static struct regulator_desc regulators[] = {
++ [PCF50606_REGULATOR_DCD] =
++ PCF50606_REGULATOR("dcd", PCF50606_REGULATOR_DCD),
++ [PCF50606_REGULATOR_DCDE] =
++ PCF50606_REGULATOR("dcde", PCF50606_REGULATOR_DCDE),
++ [PCF50606_REGULATOR_DCUD] =
++ PCF50606_REGULATOR("dcud", PCF50606_REGULATOR_DCUD),
++ [PCF50606_REGULATOR_D1REG] =
++ PCF50606_REGULATOR("d1reg", PCF50606_REGULATOR_D1REG),
++ [PCF50606_REGULATOR_D2REG] =
++ PCF50606_REGULATOR("d2reg", PCF50606_REGULATOR_D2REG),
++ [PCF50606_REGULATOR_D3REG] =
++ PCF50606_REGULATOR("d3reg", PCF50606_REGULATOR_D3REG),
++ [PCF50606_REGULATOR_LPREG] =
++ PCF50606_REGULATOR("lpreg", PCF50606_REGULATOR_LPREG),
++ [PCF50606_REGULATOR_IOREG] =
++ PCF50606_REGULATOR("ioreg", PCF50606_REGULATOR_IOREG),
++};
++
++static int __devinit pcf50606_regulator_probe(struct platform_device *pdev)
+{
-+ struct platform_battery *platform_bat;
-+ struct platform_bat_platform_data *pdata =
-+ (struct platform_bat_platform_data *)pdev->dev.platform_data;
++ struct regulator_dev *rdev;
++ struct pcf50606 *pcf;
+
-+ platform_bat = kzalloc(sizeof(*platform_bat), GFP_KERNEL);
-+ if (!platform_bat)
-+ return -ENOMEM;
++ pcf = dev_to_pcf50606(pdev->dev.parent);
+
-+ if (pdata->name)
-+ platform_bat->psy.name = pdata->name;
-+ else
-+ platform_bat->psy.name = dev_name(&pdev->dev);
-+ platform_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
-+ platform_bat->psy.properties = pdata->properties;
-+ platform_bat->psy.num_properties = pdata->num_properties;
-+ platform_bat->psy.get_property = platform_bat_get_property;
-+ platform_bat->psy.external_power_changed = platform_bat_ext_changed;
++ rdev = regulator_register(®ulators[pdev->id], &pdev->dev,
++ pdev->dev.platform_data, pcf);
++ if (IS_ERR(rdev))
++ return PTR_ERR(rdev);
+
-+ platform_bat->pdata = pdata;
-+ platform_set_drvdata(pdev, platform_bat);
-+ power_supply_register(&pdev->dev, &platform_bat->psy);
++ platform_set_drvdata(pdev, rdev);
++
++ if (pcf->pdata->regulator_registered)
++ pcf->pdata->regulator_registered(pcf, pdev->id);
+
+ return 0;
+}
+
-+static int platform_battery_remove(struct platform_device *pdev)
++static int __devexit pcf50606_regulator_remove(struct platform_device *pdev)
+{
-+ struct platform_battery *bat = platform_get_drvdata(pdev);
++ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
-+ power_supply_unregister(&bat->psy);
-+ kfree(bat);
++ platform_set_drvdata(pdev, NULL);
++ regulator_unregister(rdev);
+
+ return 0;
+}
+
-+static struct platform_driver platform_battery_driver = {
++static struct platform_driver pcf50606_regulator_driver = {
+ .driver = {
-+ .name = "platform_battery",
++ .name = "pcf50606-regltr",
++ .owner = THIS_MODULE,
+ },
-+ .probe = platform_battery_probe,
-+ .remove = platform_battery_remove,
++ .probe = pcf50606_regulator_probe,
++ .remove = __devexit_p(pcf50606_regulator_remove),
+};
+
-+static int __init platform_battery_init(void)
++static int __init pcf50606_regulator_init(void)
+{
-+ return platform_driver_register(&platform_battery_driver);
++ return platform_driver_register(&pcf50606_regulator_driver);
+}
-+module_init(platform_battery_init);
++module_init(pcf50606_regulator_init);
+
-+static void __exit platform_battery_exit(void)
++static void __exit pcf50606_regulator_exit(void)
+{
-+ platform_driver_unregister(&platform_battery_driver);
++ platform_driver_unregister(&pcf50606_regulator_driver);
+}
-+module_exit(platform_battery_exit);
++module_exit(pcf50606_regulator_exit);
+
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 regulator driver");
+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Paul Fertser <fercerpav@gmail.com>");
-+MODULE_DESCRIPTION("platform battery driver");
++MODULE_ALIAS("platform:pcf50606-regulator");
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index c8f41dc..6ef66d9 100644
--- a/drivers/regulator/pcf50633-regulator.c
if (IS_ERR(rdev))
return PTR_ERR(rdev);
+diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
+index 2883428..0a395a4 100644
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -665,6 +665,13 @@ config RTC_DRV_NUC900
+ If you say yes here you get support for the RTC subsystem of the
+ NUC910/NUC920 used in embedded systems.
+
++config RTC_DRV_PCF50606
++ depends on MFD_PCF50606
++ tristate "NXP PCF50606 RTC"
++ help
++ If you say yes here you get support for the RTC subsystem of the
++ NXP PCF50606 used in embedded systems.
++
+ comment "on-CPU RTC drivers"
+
+ config RTC_DRV_DAVINCI
+diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
+index 4c2832d..2d980e3 100644
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o
+ obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
+ obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
+ obj-$(CONFIG_RTC_DRV_PCF2123) += rtc-pcf2123.o
++obj-$(CONFIG_RTC_DRV_PCF50606) += rtc-pcf50606.o
+ obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
+ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
+ obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+diff --git a/drivers/rtc/rtc-pcf50606.c b/drivers/rtc/rtc-pcf50606.c
+new file mode 100644
+index 0000000..5501615
+--- /dev/null
++++ b/drivers/rtc/rtc-pcf50606.c
+@@ -0,0 +1,342 @@
++/* NXP PCF50606 RTC Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++#define PCF50606_REG_RTCSC 0x0a /* Second */
++#define PCF50606_REG_RTCMN 0x0b /* Minute */
++#define PCF50606_REG_RTCHR 0x0c /* Hour */
++#define PCF50606_REG_RTCWD 0x0d /* Weekday */
++#define PCF50606_REG_RTCDT 0x0e /* Day */
++#define PCF50606_REG_RTCMT 0x0f /* Month */
++#define PCF50606_REG_RTCYR 0x10 /* Year */
++#define PCF50606_REG_RTCSCA 0x11 /* Alarm Second */
++#define PCF50606_REG_RTCMNA 0x12 /* Alarm Minute */
++#define PCF50606_REG_RTCHRA 0x13 /* Alarm Hour */
++#define PCF50606_REG_RTCWDA 0x14 /* Alarm Weekday */
++#define PCF50606_REG_RTCDTA 0x15 /* Alarm Day */
++#define PCF50606_REG_RTCMTA 0x16 /* Alarm Month */
++#define PCF50606_REG_RTCYRA 0x17 /* Alarm Year */
++
++enum pcf50606_time_indexes {
++ PCF50606_TI_SEC,
++ PCF50606_TI_MIN,
++ PCF50606_TI_HOUR,
++ PCF50606_TI_WKDAY,
++ PCF50606_TI_DAY,
++ PCF50606_TI_MONTH,
++ PCF50606_TI_YEAR,
++ PCF50606_TI_EXTENT /* always last */
++};
++
++struct pcf50606_time {
++ uint8_t time[PCF50606_TI_EXTENT];
++};
++
++struct pcf50606_rtc {
++ int alarm_enabled;
++ int second_enabled;
++ int alarm_pending;
++
++ struct pcf50606 *pcf;
++ struct rtc_device *rtc_dev;
++};
++
++static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50606_time *pcf)
++{
++ rtc->tm_sec = bcd2bin(pcf->time[PCF50606_TI_SEC]);
++ rtc->tm_min = bcd2bin(pcf->time[PCF50606_TI_MIN]);
++ rtc->tm_hour = bcd2bin(pcf->time[PCF50606_TI_HOUR]);
++ rtc->tm_wday = bcd2bin(pcf->time[PCF50606_TI_WKDAY]);
++ rtc->tm_mday = bcd2bin(pcf->time[PCF50606_TI_DAY]);
++ rtc->tm_mon = bcd2bin(pcf->time[PCF50606_TI_MONTH]) - 1;
++ rtc->tm_year = bcd2bin(pcf->time[PCF50606_TI_YEAR]) + 100;
++}
++
++static void rtc2pcf_time(struct pcf50606_time *pcf, struct rtc_time *rtc)
++{
++ pcf->time[PCF50606_TI_SEC] = bin2bcd(rtc->tm_sec);
++ pcf->time[PCF50606_TI_MIN] = bin2bcd(rtc->tm_min);
++ pcf->time[PCF50606_TI_HOUR] = bin2bcd(rtc->tm_hour);
++ pcf->time[PCF50606_TI_WKDAY] = bin2bcd(rtc->tm_wday);
++ pcf->time[PCF50606_TI_DAY] = bin2bcd(rtc->tm_mday);
++ pcf->time[PCF50606_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
++ pcf->time[PCF50606_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
++}
++
++static int
++pcf50606_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
++{
++ struct pcf50606_rtc *rtc = dev_get_drvdata(dev);
++
++ switch (cmd) {
++ case RTC_AIE_OFF:
++ rtc->alarm_enabled = 0;
++ pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_ALARM);
++ return 0;
++ case RTC_AIE_ON:
++ rtc->alarm_enabled = 1;
++ pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_ALARM);
++ return 0;
++ case RTC_UIE_OFF:
++ rtc->second_enabled = 0;
++ pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_SECOND);
++ return 0;
++ case RTC_UIE_ON:
++ rtc->second_enabled = 1;
++ pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_SECOND);
++ return 0;
++ }
++
++ return -ENOIOCTLCMD;
++}
++
++static int pcf50606_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++ struct pcf50606_rtc *rtc;
++ struct pcf50606_time pcf_tm;
++ int ret;
++
++ rtc = dev_get_drvdata(dev);
++
++ ret = pcf50606_read_block(rtc->pcf, PCF50606_REG_RTCSC,
++ PCF50606_TI_EXTENT,
++ &pcf_tm.time[0]);
++ if (ret != PCF50606_TI_EXTENT) {
++ dev_err(dev, "Failed to read time\n");
++ return -EIO;
++ }
++
++ dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
++ pcf_tm.time[PCF50606_TI_DAY],
++ pcf_tm.time[PCF50606_TI_MONTH],
++ pcf_tm.time[PCF50606_TI_YEAR],
++ pcf_tm.time[PCF50606_TI_HOUR],
++ pcf_tm.time[PCF50606_TI_MIN],
++ pcf_tm.time[PCF50606_TI_SEC]);
++
++ pcf2rtc_time(tm, &pcf_tm);
++
++ dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
++ tm->tm_mday, tm->tm_mon, tm->tm_year,
++ tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++ return rtc_valid_tm(tm);
++}
++
++static int pcf50606_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++ struct pcf50606_rtc *rtc;
++ struct pcf50606_time pcf_tm;
++ int second_masked, alarm_masked, ret = 0;
++
++ rtc = dev_get_drvdata(dev);
++
++ dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
++ tm->tm_mday, tm->tm_mon, tm->tm_year,
++ tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++ rtc2pcf_time(&pcf_tm, tm);
++
++ dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
++ pcf_tm.time[PCF50606_TI_DAY],
++ pcf_tm.time[PCF50606_TI_MONTH],
++ pcf_tm.time[PCF50606_TI_YEAR],
++ pcf_tm.time[PCF50606_TI_HOUR],
++ pcf_tm.time[PCF50606_TI_MIN],
++ pcf_tm.time[PCF50606_TI_SEC]);
++
++
++ second_masked = pcf50606_irq_mask_get(rtc->pcf, PCF50606_IRQ_SECOND);
++ alarm_masked = pcf50606_irq_mask_get(rtc->pcf, PCF50606_IRQ_ALARM);
++
++ if (!second_masked)
++ pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_SECOND);
++ if (!alarm_masked)
++ pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++ /* Returns 0 on success */
++ ret = pcf50606_write_block(rtc->pcf, PCF50606_REG_RTCSC,
++ PCF50606_TI_EXTENT,
++ &pcf_tm.time[0]);
++
++ if (!second_masked)
++ pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_SECOND);
++ if (!alarm_masked)
++ pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++ return ret;
++}
++
++static int pcf50606_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct pcf50606_rtc *rtc;
++ struct pcf50606_time pcf_tm;
++ int ret = 0;
++
++ rtc = dev_get_drvdata(dev);
++
++ alrm->enabled = rtc->alarm_enabled;
++ alrm->pending = rtc->alarm_pending;
++
++ ret = pcf50606_read_block(rtc->pcf, PCF50606_REG_RTCSCA,
++ PCF50606_TI_EXTENT, &pcf_tm.time[0]);
++ if (ret != PCF50606_TI_EXTENT) {
++ dev_err(dev, "Failed to read time\n");
++ return -EIO;
++ }
++
++ pcf2rtc_time(&alrm->time, &pcf_tm);
++
++ return rtc_valid_tm(&alrm->time);
++}
++
++static int pcf50606_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct pcf50606_rtc *rtc;
++ struct pcf50606_time pcf_tm;
++ int alarm_masked, ret = 0;
++
++ rtc = dev_get_drvdata(dev);
++
++ rtc2pcf_time(&pcf_tm, &alrm->time);
++
++ /* do like mktime does and ignore tm_wday */
++ pcf_tm.time[PCF50606_TI_WKDAY] = 7;
++
++ alarm_masked = pcf50606_irq_mask_get(rtc->pcf, PCF50606_IRQ_ALARM);
++
++ /* disable alarm interrupt */
++ if (!alarm_masked)
++ pcf50606_irq_mask(rtc->pcf, PCF50606_IRQ_ALARM);
++
++ /* Returns 0 on success */
++ ret = pcf50606_write_block(rtc->pcf, PCF50606_REG_RTCSCA,
++ PCF50606_TI_EXTENT, &pcf_tm.time[0]);
++
++ if (!alrm->enabled)
++ rtc->alarm_pending = 0;
++
++ if (!alarm_masked || alrm->enabled)
++ pcf50606_irq_unmask(rtc->pcf, PCF50606_IRQ_ALARM);
++ rtc->alarm_enabled = alrm->enabled;
++
++ return ret;
++}
++
++static struct rtc_class_ops pcf50606_rtc_ops = {
++ .ioctl = pcf50606_rtc_ioctl,
++ .read_time = pcf50606_rtc_read_time,
++ .set_time = pcf50606_rtc_set_time,
++ .read_alarm = pcf50606_rtc_read_alarm,
++ .set_alarm = pcf50606_rtc_set_alarm,
++};
++
++static void pcf50606_rtc_irq(int irq, void *data)
++{
++ struct pcf50606_rtc *rtc = data;
++
++ switch (irq) {
++ case PCF50606_IRQ_ALARM:
++ rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
++ rtc->alarm_pending = 1;
++ break;
++ case PCF50606_IRQ_SECOND:
++ rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
++ break;
++ }
++}
++
++static int __devinit pcf50606_rtc_probe(struct platform_device *pdev)
++{
++ struct pcf50606_rtc *rtc;
++
++ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
++ if (!rtc)
++ return -ENOMEM;
++
++ rtc->pcf = dev_to_pcf50606(pdev->dev.parent);
++ platform_set_drvdata(pdev, rtc);
++ rtc->rtc_dev = rtc_device_register("pcf50606-rtc", &pdev->dev,
++ &pcf50606_rtc_ops, THIS_MODULE);
++
++ if (IS_ERR(rtc->rtc_dev)) {
++ kfree(rtc);
++ return PTR_ERR(rtc->rtc_dev);
++ }
++
++ pcf50606_register_irq(rtc->pcf, PCF50606_IRQ_ALARM,
++ pcf50606_rtc_irq, rtc);
++ pcf50606_register_irq(rtc->pcf, PCF50606_IRQ_SECOND,
++ pcf50606_rtc_irq, rtc);
++
++ return 0;
++}
++
++
++static int __devexit pcf50606_rtc_remove(struct platform_device *pdev)
++{
++ struct pcf50606_rtc *rtc;
++
++ rtc = platform_get_drvdata(pdev);
++
++ rtc_device_unregister(rtc->rtc_dev);
++
++ pcf50606_free_irq(rtc->pcf, PCF50606_IRQ_ALARM);
++ pcf50606_free_irq(rtc->pcf, PCF50606_IRQ_SECOND);
++
++ platform_set_drvdata(pdev, NULL);
++ kfree(rtc);
++
++ return 0;
++}
++
++
++static struct platform_driver pcf50606_rtc_driver = {
++ .driver = {
++ .name = "pcf50606-rtc",
++ .owner = THIS_MODULE,
++ },
++ .probe = pcf50606_rtc_probe,
++ .remove = __devexit_p(pcf50606_rtc_remove),
++};
++
++static int __init pcf50606_rtc_init(void)
++{
++ return platform_driver_register(&pcf50606_rtc_driver);
++}
++module_init(pcf50606_rtc_init);
++
++static void __exit pcf50606_rtc_exit(void)
++{
++ platform_driver_unregister(&pcf50606_rtc_driver);
++}
++module_exit(pcf50606_rtc_exit);
++
++MODULE_DESCRIPTION("PCF50606 RTC driver");
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_LICENSE("GPL");
++
diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
index 16edf94..c517ec0 100644
--- a/drivers/rtc/rtc-pcf50633.c
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo-fb");
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index a5ad77e..b766ba6 100644
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -174,6 +174,13 @@ config S3C2410_WATCHDOG
+ The driver can be built as a module by choosing M, and will
+ be called s3c2410_wdt
+
++config PCF50606_WATCHDOG
++ depends on MFD_PCF50606
++ tristate "Philips PCF50606 watchdog"
++ help
++ If you say yes here you get support for the Philips PCF50606
++ PMU's watchdog.
++
+ config SA1100_WATCHDOG
+ tristate "SA1100/PXA2xx watchdog"
+ depends on ARCH_SA1100 || ARCH_PXA
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index 4b0ef38..ee4c2af 100644
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
+ obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
+ obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
+ obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
++obj-$(CONFIG_PCF50606_WATCHDOG) += pcf50606_wdt.o
+ obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
+ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+diff --git a/drivers/watchdog/pcf50606_wdt.c b/drivers/watchdog/pcf50606_wdt.c
+new file mode 100644
+index 0000000..623cba0
+--- /dev/null
++++ b/drivers/watchdog/pcf50606_wdt.c
+@@ -0,0 +1,216 @@
++/* Philips PCF50606 Watchdog Timer Driver
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * Author: Balaji Rao <balajirrao@openmoko.org>
++ * All rights reserved.
++ *
++ * Broken down from monstrous PCF50606 driver mainly by
++ * Harald Welte, Matt Hsu, Andy Green and Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/rtc.h>
++#include <linux/bcd.h>
++#include <linux/err.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/platform_device.h>
++
++#include <linux/mfd/pcf50606/core.h>
++
++static struct pcf50606 *pcf = NULL;
++static unsigned long wdt_status;
++
++#define WDT_IN_USE 0
++#define WDT_OK_TO_CLOSE 1
++#define WDT_REGION_INITED 2
++#define WDT_DEVICE_INITED 3
++
++static int allow_close;
++#define CLOSE_STATE_NOT 0x0000
++#define CLOSE_STATE_ALLOW 0x2342
++
++#define PCF50606_REG_OOCC1 0x08
++#define PCF50606_REG_OOCS 0x01
++
++#define PCF50606_OOCS_WDTEXP 0x80
++#define PCF50606_OOCC1_WDTRST 0x08
++
++static void pcf50606_wdt_start(void)
++{
++ pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_OOCC1, PCF50606_OOCC1_WDTRST,
++ PCF50606_OOCC1_WDTRST);
++}
++
++static void pcf50606_wdt_stop(void)
++{
++ pcf50606_reg_clear_bits(pcf, PCF50606_REG_OOCS, PCF50606_OOCS_WDTEXP);
++}
++
++static void pcf50606_wdt_keepalive(void)
++{
++ pcf50606_wdt_start();
++}
++
++static int pcf50606_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(WDT_IN_USE, &wdt_status))
++ return -EBUSY;
++
++ pcf50606_wdt_start();
++
++ return nonseekable_open(inode, file);
++}
++
++static int pcf50606_wdt_release(struct inode *inode, struct file *file)
++{
++ if (allow_close == CLOSE_STATE_ALLOW)
++ pcf50606_wdt_stop();
++ else {
++ printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n");
++ pcf50606_wdt_keepalive();
++ }
++
++ allow_close = CLOSE_STATE_NOT;
++ clear_bit(WDT_IN_USE, &wdt_status);
++
++ return 0;
++}
++
++static ssize_t pcf50606_wdt_write(struct file *file, const char __user *data,
++ size_t len, loff_t *ppos)
++{
++ if (len) {
++ size_t i;
++
++ for (i = 0; i != len; i++) {
++ char c;
++ if (get_user(c, data + i))
++ return -EFAULT;
++ if (c == 'V')
++ allow_close = CLOSE_STATE_ALLOW;
++ }
++ pcf50606_wdt_keepalive();
++ }
++
++ return len;
++}
++
++static struct watchdog_info pcf50606_wdt_ident = {
++ .options = WDIOF_MAGICCLOSE,
++ .firmware_version = 0,
++ .identity = "PCF50606 Watchdog",
++};
++
++static long pcf50606_wdt_ioctl(struct file *file, unsigned int cmd,
++ unsigned long arg)
++{
++ void __user *argp = (void __user *)arg;
++ int __user *p = argp;
++
++ switch (cmd) {
++ case WDIOC_GETSUPPORT:
++ return copy_to_user(argp, &pcf50606_wdt_ident,
++ sizeof(pcf50606_wdt_ident)) ? -EFAULT : 0;
++ break;
++ case WDIOC_GETSTATUS:
++ case WDIOC_GETBOOTSTATUS:
++ return put_user(0, p);
++ case WDIOC_KEEPALIVE:
++ pcf50606_wdt_keepalive();
++ return 0;
++ case WDIOC_GETTIMEOUT:
++ return put_user(8, p);
++ default:
++ return -ENOIOCTLCMD;
++ }
++}
++
++static struct file_operations pcf50606_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = pcf50606_wdt_write,
++ .unlocked_ioctl = pcf50606_wdt_ioctl,
++ .open = pcf50606_wdt_open,
++ .release = pcf50606_wdt_release,
++};
++
++static struct miscdevice pcf50606_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &pcf50606_wdt_fops,
++};
++
++static void pcf50606_wdt_irq(int irq, void *unused)
++{
++ pcf50606_reg_set_bit_mask(pcf, PCF50606_REG_OOCC1,
++ PCF50606_OOCC1_WDTRST,
++ PCF50606_OOCC1_WDTRST);
++}
++
++int __init pcf50606_wdt_probe(struct platform_device *pdev)
++{
++ int err;
++
++ if (pcf) {
++ dev_err(pcf->dev, "Only one instance of WDT supported\n");
++ return -ENODEV;
++ }
++
++ pcf = dev_to_pcf50606(pdev->dev.parent);
++
++ err = misc_register(&pcf50606_wdt_miscdev);
++ if (err) {
++ dev_err(&pdev->dev, "cannot register miscdev on "
++ "minor=%d (%d)\n", WATCHDOG_MINOR, err);
++ return err;
++ }
++ set_bit(WDT_DEVICE_INITED, &wdt_status);
++
++ pcf50606_register_irq(pcf, PCF50606_IRQ_CHGWD10S, pcf50606_wdt_irq, NULL);
++
++ return 0;
++}
++
++static int __devexit pcf50606_wdt_remove(struct platform_device *pdev)
++{
++ pcf50606_free_irq(pcf, PCF50606_IRQ_CHGWD10S);
++ misc_deregister(&pcf50606_wdt_miscdev);
++ pcf = NULL;
++
++ return 0;
++}
++
++struct platform_driver pcf50606_wdt_driver = {
++ .driver = {
++ .name = "pcf50606-wdt",
++ },
++ .probe = pcf50606_wdt_probe,
++ .remove = __devexit_p(pcf50606_wdt_remove),
++};
++
++static int __init pcf50606_wdt_init(void)
++{
++ return platform_driver_register(&pcf50606_wdt_driver);
++}
++module_init(pcf50606_wdt_init);
++
++static void __exit pcf50606_wdt_exit(void)
++{
++ platform_driver_unregister(&pcf50606_wdt_driver);
++}
++module_exit(pcf50606_wdt_exit);
++
++MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
++MODULE_DESCRIPTION("PCF50606 wdt driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:pcf50606-wdt");
++
diff --git a/include/linux/fb.h b/include/linux/fb.h
index d1631d3..3a45dc9 100644
--- a/include/linux/fb.h
+};
+
+#endif
+diff --git a/include/linux/mfd/pcf50606/adc.h b/include/linux/mfd/pcf50606/adc.h
+new file mode 100644
+index 0000000..fd48403
+--- /dev/null
++++ b/include/linux/mfd/pcf50606/adc.h
+@@ -0,0 +1,72 @@
++/*
++ * adc.h -- Driver for NXP PCF50606 ADC
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_ADC_H
++#define __LINUX_MFD_PCF50606_ADC_H
++
++#include <linux/mfd/pcf50633/core.h>
++#include <linux/platform_device.h>
++
++/* ADC Registers */
++#define PCF50606_REG_ADCC1 0x2e
++#define PCF50606_REG_ADCC2 0x2f
++#define PCF50606_REG_ADCS1 0x30
++#define PCF50606_REG_ADCS2 0x31
++#define PCF50606_REG_ADCS3 0x32
++
++#define PCF50606_ADCC1_TSCMODACT 0x01
++#define PCF50606_ADCC1_TSCMODSTB 0x02
++#define PCF50606_ADCC1_TRATSET 0x04
++#define PCF50606_ADCC1_NTCSWAPE 0x08
++#define PCF50606_ADCC1_NTCSWAOFF 0x10
++#define PCF50606_ADCC1_EXTSYNCBREAK 0x20
++ /* reserved */
++#define PCF50606_ADCC1_TSCINT 0x80
++
++#define PCF50606_ADCC2_ADCSTART 0x01
++ /* see enum pcf50606_adcc2_adcmux */
++#define PCF50606_ADCC2_SYNC_NONE 0x00
++#define PCF50606_ADCC2_SYNC_TXON 0x20
++#define PCF50606_ADCC2_SYNC_PWREN1 0x40
++#define PCF50606_ADCC2_SYNC_PWREN2 0x60
++#define PCF50606_ADCC2_RES_10BIT 0x00
++#define PCF50606_ADCC2_RES_8BIT 0x80
++
++#define PCF50606_ADCC2_ADCMUX_MASK (0xf << 1)
++
++#define ADCMUX_SHIFT 1
++#define PCF50606_ADCMUX_BATVOLT_RES (0x0 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_BATVOLT_SUBTR (0x1 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN1_RES (0x2 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN1_SUBTR (0x3 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_BATTEMP (0x4 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN2 (0x5 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN3 (0x6 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_ADCIN3_RATIO (0x7 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_XPOS (0x8 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_YPOS (0x9 << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_P1 (0xa << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_P2 (0xb << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_BATVOLT_ADCIN1 (0xc << ADCMUX_SHIFT)
++#define PCF50606_ADCMUX_XY_SEQUENCE (0xe << ADCMUX_SHIFT)
++#define PCF50606_P1_P2_RESISTANCE (0xf << ADCMUX_SHIFT)
++
++#define PCF50606_ADCS2_ADCRDY 0x80
++
++extern int
++pcf50606_adc_async_read(struct pcf50606 *pcf, int mux,
++ void (*callback)(struct pcf50606 *, void *, int),
++ void *callback_param);
++extern int
++pcf50606_adc_sync_read(struct pcf50606 *pcf, int mux);
++
++#endif /* __LINUX_PCF50606_ADC_H */
+diff --git a/include/linux/mfd/pcf50606/core.h b/include/linux/mfd/pcf50606/core.h
+new file mode 100644
+index 0000000..e036e07
+--- /dev/null
++++ b/include/linux/mfd/pcf50606/core.h
+@@ -0,0 +1,172 @@
++/*
++ * core.h -- Core driver for NXP PCF50606
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_CORE_H
++#define __LINUX_MFD_PCF50606_CORE_H
++
++#include <linux/i2c.h>
++#include <linux/workqueue.h>
++#include <linux/regulator/driver.h>
++#include <linux/regulator/machine.h>
++#include <linux/power_supply.h>
++
++struct pcf50606;
++
++#define PCF50606_NUM_REGULATORS 8
++
++struct pcf50606_platform_data {
++ struct regulator_init_data reg_init_data[PCF50606_NUM_REGULATORS];
++
++ char **batteries;
++ int num_batteries;
++
++ /* Callbacks */
++ void (*probe_done)(struct pcf50606 *);
++ void (*mbc_event_callback)(struct pcf50606 *, int);
++ void (*regulator_registered)(struct pcf50606 *, int);
++ void (*force_shutdown)(struct pcf50606 *);
++
++ u8 resumers[3];
++};
++
++struct pcf50606_irq {
++ void (*handler)(int, void *);
++ void *data;
++};
++
++int pcf50606_register_irq(struct pcf50606 *pcf, int irq,
++ void (*handler) (int, void *), void *data);
++int pcf50606_free_irq(struct pcf50606 *pcf, int irq);
++
++int pcf50606_irq_mask(struct pcf50606 *pcf, int irq);
++int pcf50606_irq_unmask(struct pcf50606 *pcf, int irq);
++int pcf50606_irq_mask_get(struct pcf50606 *pcf, int irq);
++
++int pcf50606_read_block(struct pcf50606 *, u8 reg,
++ int nr_regs, u8 *data);
++int pcf50606_write_block(struct pcf50606 *pcf, u8 reg,
++ int nr_regs, u8 *data);
++u8 pcf50606_reg_read(struct pcf50606 *, u8 reg);
++int pcf50606_reg_write(struct pcf50606 *pcf, u8 reg, u8 val);
++
++int pcf50606_reg_set_bit_mask(struct pcf50606 *pcf, u8 reg, u8 mask, u8 val);
++int pcf50606_reg_clear_bits(struct pcf50606 *pcf, u8 reg, u8 bits);
++
++/* Interrupt registers */
++
++#define PCF50606_REG_INT1 0x02
++#define PCF50606_REG_INT2 0x03
++#define PCF50606_REG_INT3 0x04
++
++#define PCF50606_REG_INT1M 0x05
++#define PCF50606_REG_INT2M 0x06
++#define PCF50606_REG_INT3M 0x07
++
++enum {
++ /* Chip IRQs */
++ PCF50606_IRQ_ONKEYR,
++ PCF50606_IRQ_ONKEYF,
++ PCF50606_IRQ_ONKEY1S,
++ PCF50606_IRQ_EXTONR,
++ PCF50606_IRQ_EXTONF,
++ PCF50606_IRQ_RESERVED_1,
++ PCF50606_IRQ_SECOND,
++ PCF50606_IRQ_ALARM,
++ PCF50606_IRQ_CHGINS,
++ PCF50606_IRQ_CHGRM,
++ PCF50606_IRQ_CHGFOK,
++ PCF50606_IRQ_CHGERR,
++ PCF50606_IRQ_CHGFRDY,
++ PCF50606_IRQ_CHGPROT,
++ PCF50606_IRQ_CHGWD10S,
++ PCF50606_IRQ_CHGWDEXP,
++ PCF50606_IRQ_ADCRDY,
++ PCF50606_IRQ_ACDINS,
++ PCF50606_IRQ_ACDREM,
++ PCF50606_IRQ_TSCPRES,
++ PCF50606_IRQ_RESERVED_2,
++ PCF50606_IRQ_RESERVED_3,
++ PCF50606_IRQ_LOWBAT,
++ PCF50606_IRQ_HIGHTMP,
++
++ /* Always last */
++ PCF50606_NUM_IRQ,
++};
++
++struct pcf50606 {
++ struct device *dev;
++ struct i2c_client *i2c_client;
++
++ struct pcf50606_platform_data *pdata;
++ int irq;
++ struct pcf50606_irq irq_handler[PCF50606_NUM_IRQ];
++ struct work_struct irq_work;
++ struct mutex lock;
++
++ u8 mask_regs[3];
++
++ u8 suspend_irq_masks[3];
++ u8 resume_reason[3];
++ int is_suspended;
++
++ int onkey1s_held;
++
++ struct platform_device *rtc_pdev;
++ struct platform_device *mbc_pdev;
++ struct platform_device *adc_pdev;
++ struct platform_device *input_pdev;
++ struct platform_device *wdt_pdev;
++ struct platform_device *regulator_pdev[PCF50606_NUM_REGULATORS];
++};
++
++enum pcf50606_reg_int1 {
++ PCF50606_INT1_ONKEYR = 0x01, /* ONKEY rising edge */
++ PCF50606_INT1_ONKEYF = 0x02, /* ONKEY falling edge */
++ PCF50606_INT1_ONKEY1S = 0x04, /* OMKEY at least 1sec low */
++ PCF50606_INT1_EXTONR = 0x08, /* EXTON rising edge */
++ PCF50606_INT1_EXTONF = 0x10, /* EXTON falling edge */
++ PCF50606_INT1_SECOND = 0x40, /* RTC periodic second interrupt */
++ PCF50606_INT1_ALARM = 0x80, /* RTC alarm time is reached */
++};
++
++enum pcf50606_reg_int2 {
++ PCF50606_INT2_CHGINS = 0x01, /* Charger inserted */
++ PCF50606_INT2_CHGRM = 0x02, /* Charger removed */
++ PCF50606_INT2_CHGFOK = 0x04, /* Fast charging OK */
++ PCF50606_INT2_CHGERR = 0x08, /* Error in charging mode */
++ PCF50606_INT2_CHGFRDY = 0x10, /* Fast charge completed */
++ PCF50606_INT2_CHGPROT = 0x20, /* Charging protection interrupt */
++ PCF50606_INT2_CHGWD10S = 0x40, /* Charger watchdig expires in 10s */
++ PCF50606_INT2_CHGWDEXP = 0x80, /* Charger watchdog expires */
++};
++
++enum pcf50606_reg_int3 {
++ PCF50606_INT3_ADCRDY = 0x01, /* ADC conversion finished */
++ PCF50606_INT3_ACDINS = 0x02, /* Accessory inserted */
++ PCF50606_INT3_ACDREM = 0x04, /* Accessory removed */
++ PCF50606_INT3_TSCPRES = 0x08, /* Touch screen pressed */
++ PCF50606_INT3_LOWBAT = 0x40, /* Low battery voltage */
++ PCF50606_INT3_HIGHTMP = 0x80, /* High temperature */
++};
++
++/* Misc regs */
++
++#define PCF50606_REG_OOCC1 0x08
++#define PCF50606_OOCC1_GOSTDBY 0x01
++
++static inline struct pcf50606 *dev_to_pcf50606(struct device *dev)
++{
++ return dev_get_drvdata(dev);
++}
++
++#endif
++
+diff --git a/include/linux/mfd/pcf50606/mbc.h b/include/linux/mfd/pcf50606/mbc.h
+new file mode 100644
+index 0000000..23aeb9e
+--- /dev/null
++++ b/include/linux/mfd/pcf50606/mbc.h
+@@ -0,0 +1,52 @@
++/*
++ * mbc.h -- Driver for NXP PCF50606 Main Battery Charger
++ *
++ * (C) 2006-2008 by Openmoko, Inc.
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#ifndef __LINUX_MFD_PCF50606_MBC_H
++#define __LINUX_MFD_PCF50606_MBC_H
++
++#include <linux/mfd/pcf50606/core.h>
++#include <linux/platform_device.h>
++
++#define PCF50606_REG_OOCS 0x01
++
++/* Charger OK */
++#define PCF50606_OOCS_CHGOK 0x20
++
++#define PCF50606_REG_MBCC1 0x29
++#define PCF50606_REG_MBCC2 0x2a
++#define PCF50606_REG_MBCC3 0x2b
++#define PCF50606_REG_MBCS1 0x2c
++
++#define PCF50606_MBCC1_CHGAPE 0x01
++#define PCF50606_MBCC1_AUTOFST 0x02
++#define PCF50606_MBCC1_CHGMOD_MASK 0x1c
++#define PCF50606_MBCC1_CHGMOD_QUAL 0x00
++#define PCF50606_MBCC1_CHGMOD_PRE 0x04
++#define PCF50606_MBCC1_CHGMOD_TRICKLE 0x08
++#define PCF50606_MBCC1_CHGMOD_FAST_CCCV 0x0c
++#define PCF50606_MBCC1_CHGMOD_FAST_NOCC 0x10
++#define PCF50606_MBCC1_CHGMOD_FAST_NOCV 0x14
++#define PCF50606_MBCC1_CHGMOD_FAST_SW 0x18
++#define PCF50606_MBCC1_CHGMOD_IDLE 0x1c
++#define PCF50606_MBCC1_DETMOD_LOWCHG 0x20
++#define PCF50606_MBCC1_DETMOD_WDRST 0x40
++
++#define PCF50606_MBCC1_CHGMOD_SHIFT 2
++
++/* Charger status */
++#define PCF50606_MBC_CHARGER_ONLINE 0x01
++#define PCF50606_MBC_CHARGER_ACTIVE 0x02
++
++int pcf50606_charge_fast(struct pcf50606 *pcf, int on);
++
++#endif
++
+diff --git a/include/linux/mfd/pcf50606/pmic.h b/include/linux/mfd/pcf50606/pmic.h
+new file mode 100644
+index 0000000..1bcfe39
+--- /dev/null
++++ b/include/linux/mfd/pcf50606/pmic.h
+@@ -0,0 +1,73 @@
++#ifndef __LINUX_MFD_PCF50606_PMIC_H
++#define __LINUX_MFD_PCF50606_PMIC_H
++
++#define PCF50606_REG_DCDC1 0x1b
++#define PCF50606_REG_DCDC2 0x1c
++#define PCF50606_REG_DCDC3 0x1d
++#define PCF50606_REG_DCDC4 0x1e
++#define PCF50606_REG_DCDEC1 0x1f
++#define PCF50606_REG_DCDEC2 0x20
++#define PCF50606_REG_DCUDC1 0x21
++#define PCF50606_REG_DCUDC2 0x22
++#define PCF50606_REG_IOREGC 0x23
++#define PCF50606_REG_D1REGC1 0x24
++#define PCF50606_REG_D2REGC1 0x25
++#define PCF50606_REG_D3REGC1 0x26
++#define PCF50606_REG_LPREGC1 0x27
++#define PCF50606_REG_LPREGC2 0x28
++
++/* used by PSSC, PWROKM, PWROKS, */
++enum pcf50606_regu {
++ PCF50606_REGU_DCD = 0x01, /* DCD in phase 2 */
++ PCF50606_REGU_DCDE = 0x02, /* DCDE in phase 2 */
++ PCF50606_REGU_DCUD = 0x04, /* DCDU in phase 2 */
++ PCF50606_REGU_IO = 0x08, /* IO in phase 2 */
++ PCF50606_REGU_D1 = 0x10, /* D1 in phase 2 */
++ PCF50606_REGU_D2 = 0x20, /* D2 in phase 2 */
++ PCF50606_REGU_D3 = 0x40, /* D3 in phase 2 */
++ PCF50606_REGU_LP = 0x80, /* LP in phase 2 */
++};
++
++enum pcf50606_reg_dcdc4 {
++ PCF50606_DCDC4_MODE_AUTO = 0x00,
++ PCF50606_DCDC4_MODE_PWM = 0x01,
++ PCF50606_DCDC4_MODE_PCF = 0x02,
++ PCF50606_DCDC4_OFF_FLOAT = 0x00,
++ PCF50606_DCDC4_OFF_BYPASS = 0x04,
++ PCF50606_DCDC4_OFF_PULLDOWN = 0x08,
++ PCF50606_DCDC4_CURLIM_500mA = 0x00,
++ PCF50606_DCDC4_CURLIM_750mA = 0x10,
++ PCF50606_DCDC4_CURLIM_1000mA = 0x20,
++ PCF50606_DCDC4_CURLIM_1250mA = 0x30,
++ PCF50606_DCDC4_TOGGLE = 0x40,
++ PCF50606_DCDC4_REGSEL_DCDC2 = 0x80,
++};
++
++enum pcf50606_reg_dcdec2 {
++ PCF50606_DCDEC2_MODE_AUTO = 0x00,
++ PCF50606_DCDEC2_MODE_PWM = 0x01,
++ PCF50606_DCDEC2_MODE_PCF = 0x02,
++ PCF50606_DCDEC2_OFF_FLOAT = 0x00,
++ PCF50606_DCDEC2_OFF_BYPASS = 0x04,
++};
++
++enum pcf50606_reg_dcudc2 {
++ PCF50606_DCUDC2_MODE_AUTO = 0x00,
++ PCF50606_DCUDC2_MODE_PWM = 0x01,
++ PCF50606_DCUDC2_MODE_PCF = 0x02,
++ PCF50606_DCUDC2_OFF_FLOAT = 0x00,
++ PCF50606_DCUDC2_OFF_BYPASS = 0x04,
++};
++
++enum pcf50606_regulator_id {
++ PCF50606_REGULATOR_DCD,
++ PCF50606_REGULATOR_DCDE,
++ PCF50606_REGULATOR_DCUD,
++ PCF50606_REGULATOR_D1REG,
++ PCF50606_REGULATOR_D2REG,
++ PCF50606_REGULATOR_D3REG,
++ PCF50606_REGULATOR_LPREG,
++ PCF50606_REGULATOR_IOREG,
++};
++
++#endif
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
-index 50d4a04..fbdea09 100644
+index 50d4a04..0048cf6 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -1,4 +1,5 @@
* core.h -- Core driver for NXP PCF50633
*
* (C) 2006-2008 by Openmoko, Inc.
-@@ -19,6 +20,7 @@
+@@ -14,11 +15,11 @@
+ #define __LINUX_MFD_PCF50633_CORE_H
+
+ #include <linux/i2c.h>
+-#include <linux/workqueue.h>
+ #include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/power_supply.h>
#include <linux/mfd/pcf50633/backlight.h>
struct pcf50633;
-@@ -46,21 +48,11 @@ struct pcf50633_platform_data {
+@@ -46,21 +47,11 @@ struct pcf50633_platform_data {
u8 resumers[5];
struct pcf50633_bl_platform_data *backlight_data;
int pcf50633_read_block(struct pcf50633 *, u8 reg,
int nr_regs, u8 *data);
int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
-@@ -138,12 +130,13 @@ struct pcf50633 {
+@@ -138,12 +129,11 @@ struct pcf50633 {
struct pcf50633_platform_data *pdata;
int irq;
- struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
- struct work_struct irq_work;
- struct workqueue_struct *work_queue;
+- struct work_struct irq_work;
+- struct workqueue_struct *work_queue;
struct mutex lock;
+ struct mutex irq_lock;
u8 suspend_irq_masks[5];
u8 resume_reason[5];
-@@ -151,12 +144,9 @@ struct pcf50633 {
+@@ -151,12 +141,9 @@ struct pcf50633 {
int onkey1s_held;
git.openpandora.org / openembedded.git / commitdiff