Pyra+LC15: remove some debugging printf()

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>

diff --git a/board/goldelico/letux-cortex15/lc15.c b/board/goldelico/letux-cortex15/lc15.c
index 1b09978..a487010 100644 (file)
--- a/board/goldelico/letux-cortex15/lc15.c
+++ b/board/goldelico/letux-cortex15/lc15.c
@@ -96,7 +96,6 @@ int set_mmc_switch(void)
 
 int spl_start_uboot(void)
 {
-       printf("spl_start_uboot for LC15 called\n");
        set_mmc_switch();
        return 1;       /* no direct Linux boot */
 }

diff --git a/board/pandora/pyra+lc15/pyra+lc15.c b/board/pandora/pyra+lc15/pyra+lc15.c
index 43dfc06..babfb80 100644 (file)
--- a/board/pandora/pyra+lc15/pyra+lc15.c
+++ b/board/pandora/pyra+lc15/pyra+lc15.c
@@ -96,12 +96,8 @@ static inline int bq24297_i2c_write_u8(u8 reg, u8 val)
        int org_bus_num;
        int ret;
 
-       printf("bq24297 %02x[%02x] := %02x\n", BQ24297_ADDR, reg, val);
-
        org_bus_num = i2c_get_bus_num();
-       printf("busnum = %d\n", org_bus_num);
        i2c_set_bus_num(BQ24297_BUS);   /* select I2C2 */
-       printf("busnum = %d\n", i2c_get_bus_num());
 
        ret = i2c_write(BQ24297_ADDR, reg, 1, &val, 1);
 
@@ -114,13 +110,8 @@ static inline int bq24297_i2c_read_u8(u8 reg, u8 *val)
        int org_bus_num;
        int ret;
 
-       printf("bq24297 read %02x[%02x]\n", BQ24297_ADDR, reg);
-
        org_bus_num = i2c_get_bus_num();
-       printf("busnum = %d\n", org_bus_num);
        i2c_set_bus_num(BQ24297_BUS);   /* select I2C2 */
-       printf("busnum = %d\n", i2c_get_bus_num());
-
        ret = i2c_read(BQ24297_ADDR, reg, 1, val, 1);
 
        i2c_set_bus_num(org_bus_num);
@@ -131,9 +122,6 @@ int bq2429x_battery_present(void)
 {
        u8 reg;
 
-       printf("bq2429x_battery_present\n");
-
-       /* fault/status - can we decide battery presence? e.g. NTC fault? */
        if (bq24297_i2c_read_u8(0x09, &reg)) {
                printf("no response from bq24297\n");
                return 0;
@@ -141,20 +129,17 @@ int bq2429x_battery_present(void)
 
        printf("  r9=%02x\n", reg);
 
-       return !(reg & 0x03);   /* no NTC fault */
+       return !(reg & 0x03);   /* no NTC fault - assume battery is inserted */
 }
 
 int bq2429x_set_iinlim(int mA)
 {
        u8 reg;
 
-       printf("bq2429x_set_iinlim(%d mA)\n", mA);
-
        if (bq24297_i2c_read_u8(0x00, &reg))
                printf("no response from bq24297\n");
        else {
                /* bit 0..2 are IINLIM */
-               printf("  r0=%02x\n", reg);
                reg &= ~0x7;
                if (mA >= 3000) reg |= 0x07;
                else if (mA >= 2000) reg |= 0x06;
@@ -163,7 +148,6 @@ int bq2429x_set_iinlim(int mA)
                else if (mA >= 900) reg |= 0x03;
                else if (mA >= 500) reg |= 0x02;
                else if (mA >= 150) reg |= 0x01;
-               printf("  r0:=%02x\n", reg);
                if (bq24297_i2c_write_u8(0x00, reg))
                        printf("bq24297: could not set %d mA\n", mA);
        }
@@ -174,11 +158,9 @@ int bq2429x_set_iinlim(int mA)
 int board_init(void)
 {
        int ilim;
-       printf("board_init for Pyra+LC15 called\n");
        board_init_overwritten();       /* do everything inherited from LC15 board */
        /* set bq24297 current limit to 1.5A if we operate from no battery and 100 if we have */
        ilim = bq2429x_battery_present() ? 100 : 1500;
-       printf("ilim = %d", ilim);
        bq2429x_set_iinlim(ilim);
        return 0;
 }