[SCSI] aacraid: Add Power Management support
authorMark Salyzyn <Mark_Salyzyn@adaptec.com>
Wed, 30 Apr 2008 20:03:42 +0000 (16:03 -0400)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Fri, 2 May 2008 18:06:44 +0000 (13:06 -0500)
For firmware that supports the feature(s), add the ability to start or
stop an array using the associated SCSI commands, to automatically
manage the spin-up of an array on new I/O reporting back the
appropriate check conditions and actions in cooperation with the
normal timeout mechanisms and enable the blackout period management in
the Firmware associated with the background spin-down of the arrays
when the Firmware times out and deems the arrays as idle.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/aacraid/aachba.c
drivers/scsi/aacraid/aacraid.h
drivers/scsi/aacraid/comminit.c
drivers/scsi/aacraid/linit.c

index 460d402..aa4e77c 100644 (file)
@@ -498,6 +498,11 @@ static void _aac_probe_container2(void * context, struct fib * fibptr)
                    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
                    (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
                        fsa_dev_ptr->valid = 1;
+                       /* sense_key holds the current state of the spin-up */
+                       if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
+                               fsa_dev_ptr->sense_data.sense_key = NOT_READY;
+                       else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
+                               fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
                        fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
                        fsa_dev_ptr->size
                          = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
@@ -1509,20 +1514,35 @@ static void io_callback(void *context, struct fib * fibptr)
        scsi_dma_unmap(scsicmd);
 
        readreply = (struct aac_read_reply *)fib_data(fibptr);
-       if (le32_to_cpu(readreply->status) == ST_OK)
-               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
-       else {
+       switch (le32_to_cpu(readreply->status)) {
+       case ST_OK:
+               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                       SAM_STAT_GOOD;
+               dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
+               break;
+       case ST_NOT_READY:
+               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                       SAM_STAT_CHECK_CONDITION;
+               set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
+                 SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
+               memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+                      min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
+                            SCSI_SENSE_BUFFERSIZE));
+               break;
+       default:
 #ifdef AAC_DETAILED_STATUS_INFO
                printk(KERN_WARNING "io_callback: io failed, status = %d\n",
                  le32_to_cpu(readreply->status));
 #endif
-               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                       SAM_STAT_CHECK_CONDITION;
                set_sense(&dev->fsa_dev[cid].sense_data,
                  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
                  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
                             SCSI_SENSE_BUFFERSIZE));
+               break;
        }
        aac_fib_complete(fibptr);
        aac_fib_free(fibptr);
@@ -1863,6 +1883,84 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd)
        return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static void aac_start_stop_callback(void *context, struct fib *fibptr)
+{
+       struct scsi_cmnd *scsicmd = context;
+
+       if (!aac_valid_context(scsicmd, fibptr))
+               return;
+
+       BUG_ON(fibptr == NULL);
+
+       scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+
+       aac_fib_complete(fibptr);
+       aac_fib_free(fibptr);
+       scsicmd->scsi_done(scsicmd);
+}
+
+static int aac_start_stop(struct scsi_cmnd *scsicmd)
+{
+       int status;
+       struct fib *cmd_fibcontext;
+       struct aac_power_management *pmcmd;
+       struct scsi_device *sdev = scsicmd->device;
+       struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+
+       if (!(aac->supplement_adapter_info.SupportedOptions2 &
+             AAC_OPTION_POWER_MANAGEMENT)) {
+               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                                 SAM_STAT_GOOD;
+               scsicmd->scsi_done(scsicmd);
+               return 0;
+       }
+
+       if (aac->in_reset)
+               return SCSI_MLQUEUE_HOST_BUSY;
+
+       /*
+        *      Allocate and initialize a Fib
+        */
+       cmd_fibcontext = aac_fib_alloc(aac);
+       if (!cmd_fibcontext)
+               return SCSI_MLQUEUE_HOST_BUSY;
+
+       aac_fib_init(cmd_fibcontext);
+
+       pmcmd = fib_data(cmd_fibcontext);
+       pmcmd->command = cpu_to_le32(VM_ContainerConfig);
+       pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
+       /* Eject bit ignored, not relevant */
+       pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
+               cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
+       pmcmd->cid = cpu_to_le32(sdev_id(sdev));
+       pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
+               cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
+
+       /*
+        *      Now send the Fib to the adapter
+        */
+       status = aac_fib_send(ContainerCommand,
+                 cmd_fibcontext,
+                 sizeof(struct aac_power_management),
+                 FsaNormal,
+                 0, 1,
+                 (fib_callback)aac_start_stop_callback,
+                 (void *)scsicmd);
+
+       /*
+        *      Check that the command queued to the controller
+        */
+       if (status == -EINPROGRESS) {
+               scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+               return 0;
+       }
+
+       aac_fib_complete(cmd_fibcontext);
+       aac_fib_free(cmd_fibcontext);
+       return SCSI_MLQUEUE_HOST_BUSY;
+}
+
 /**
  *     aac_scsi_cmd()          -       Process SCSI command
  *     @scsicmd:               SCSI command block
@@ -1899,7 +1997,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                         *      If the target container doesn't exist, it may have
                         *      been newly created
                         */
-                       if ((fsa_dev_ptr[cid].valid & 1) == 0) {
+                       if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
+                         (fsa_dev_ptr[cid].sense_data.sense_key ==
+                          NOT_READY)) {
                                switch (scsicmd->cmnd[0]) {
                                case SERVICE_ACTION_IN:
                                        if (!(dev->raw_io_interface) ||
@@ -2091,8 +2191,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
                scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
                /* Do not cache partition table for arrays */
                scsicmd->device->removable = 1;
-
-               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+               scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                 SAM_STAT_GOOD;
                scsicmd->scsi_done(scsicmd);
 
                return 0;
@@ -2187,15 +2287,32 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
         *      These commands are all No-Ops
         */
        case TEST_UNIT_READY:
+               if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
+                       scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+                               SAM_STAT_CHECK_CONDITION;
+                       set_sense(&dev->fsa_dev[cid].sense_data,
+                                 NOT_READY, SENCODE_BECOMING_READY,
+                                 ASENCODE_BECOMING_READY, 0, 0);
+                       memcpy(scsicmd->sense_buffer,
+                              &dev->fsa_dev[cid].sense_data,
+                              min_t(size_t,
+                                    sizeof(dev->fsa_dev[cid].sense_data),
+                                    SCSI_SENSE_BUFFERSIZE));
+                       scsicmd->scsi_done(scsicmd);
+                       return 0;
+               }
+               /* FALLTHRU */
        case RESERVE:
        case RELEASE:
        case REZERO_UNIT:
        case REASSIGN_BLOCKS:
        case SEEK_10:
-       case START_STOP:
                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
                scsicmd->scsi_done(scsicmd);
                return 0;
+
+       case START_STOP:
+               return aac_start_stop(scsicmd);
        }
 
        switch (scsicmd->cmnd[0])
index a990e5b..73916ad 100644 (file)
@@ -12,7 +12,7 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2455
+# define AAC_DRIVER_BUILD 2456
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS 32
@@ -424,6 +424,8 @@ struct aac_init
         */
        __le32  InitFlags;      /* flags for supported features */
 #define INITFLAGS_NEW_COMM_SUPPORTED   0x00000001
+#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
+#define INITFLAGS_DRIVER_SUPPORTS_PM   0x00000020
        __le32  MaxIoCommands;  /* max outstanding commands */
        __le32  MaxIoSize;      /* largest I/O command */
        __le32  MaxFibSize;     /* largest FIB to adapter */
@@ -867,8 +869,10 @@ struct aac_supplement_adapter_info
 };
 #define AAC_FEATURE_FALCON     cpu_to_le32(0x00000010)
 #define AAC_FEATURE_JBOD       cpu_to_le32(0x08000000)
-#define AAC_OPTION_MU_RESET    cpu_to_le32(0x00000001)
-#define AAC_OPTION_IGNORE_RESET        cpu_to_le32(0x00000002)
+/* SupportedOptions2 */
+#define AAC_OPTION_MU_RESET            cpu_to_le32(0x00000001)
+#define AAC_OPTION_IGNORE_RESET                cpu_to_le32(0x00000002)
+#define AAC_OPTION_POWER_MANAGEMENT    cpu_to_le32(0x00000004)
 #define AAC_SIS_VERSION_V3     3
 #define AAC_SIS_SLOT_UNKNOWN   0xFF
 
@@ -1148,6 +1152,7 @@ struct aac_dev
 #define                ST_DQUOT        69
 #define                ST_STALE        70
 #define                ST_REMOTE       71
+#define                ST_NOT_READY    72
 #define                ST_BADHANDLE    10001
 #define                ST_NOT_SYNC     10002
 #define                ST_BAD_COOKIE   10003
@@ -1269,6 +1274,18 @@ struct aac_synchronize_reply {
        u8              data[16];
 };
 
+#define CT_POWER_MANAGEMENT    245
+#define CT_PM_START_UNIT       2
+#define CT_PM_STOP_UNIT                3
+#define CT_PM_UNIT_IMMEDIATE   1
+struct aac_power_management {
+       __le32          command;        /* VM_ContainerConfig */
+       __le32          type;           /* CT_POWER_MANAGEMENT */
+       __le32          sub;            /* CT_PM_* */
+       __le32          cid;
+       __le32          parm;           /* CT_PM_sub_* */
+};
+
 #define CT_PAUSE_IO    65
 #define CT_RELEASE_IO  66
 struct aac_pause {
@@ -1536,6 +1553,7 @@ struct aac_mntent {
 #define FSCS_NOTCLEAN  0x0001  /* fsck is necessary before mounting */
 #define FSCS_READONLY  0x0002  /* possible result of broken mirror */
 #define FSCS_HIDDEN    0x0004  /* should be ignored - set during a clear */
+#define FSCS_NOT_READY 0x0008  /* Array spinning up to fulfil request */
 
 struct aac_query_mount {
        __le32          command;
index 294a802..cbac063 100644 (file)
@@ -97,6 +97,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
                init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
                dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
        }
+       init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
+                                      INITFLAGS_DRIVER_SUPPORTS_PM);
        init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
        init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
        init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
index c444527..1f7c836 100644 (file)
@@ -811,6 +811,12 @@ static ssize_t aac_show_flags(struct device *cdev,
                                "SAI_READ_CAPACITY_16\n");
        if (dev->jbod)
                len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
+       if (dev->supplement_adapter_info.SupportedOptions2 &
+               AAC_OPTION_POWER_MANAGEMENT)
+               len += snprintf(buf + len, PAGE_SIZE - len,
+                               "SUPPORTED_POWER_MANAGEMENT\n");
+       if (dev->msi)
+               len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
        return len;
 }