+++ /dev/null
-diff -urNd -urNd libtool-1.5/acinclude.m4 libtool-1.5.m4/acinclude.m4
---- libtool-1.5/acinclude.m4 2003-04-14 18:29:13.000000000 -0400
-+++ libtool-1.5.m4/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/cdemo/acinclude.m4 libtool-1.5.m4/cdemo/acinclude.m4
---- libtool-1.5/cdemo/acinclude.m4 2003-04-14 18:29:37.000000000 -0400
-+++ libtool-1.5.m4/cdemo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/configure.ac libtool-1.5.m4/configure.ac
---- libtool-1.5/configure.ac 2003-04-14 17:59:23.000000000 -0400
-+++ libtool-1.5.m4/configure.ac 2004-05-04 17:59:48.000000000 -0400
-@@ -28,8 +28,6 @@
- AC_INIT([libtool], [1.5], [bug-libtool@gnu.org])
- AC_CONFIG_SRCDIR([ltmain.in])
-
--
--
- ## ---------------------------------------- ##
- ## Display a configure time version banner. ##
- ## ---------------------------------------- ##
-diff -urNd -urNd libtool-1.5/demo/acinclude.m4 libtool-1.5.m4/demo/acinclude.m4
---- libtool-1.5/demo/acinclude.m4 2003-04-14 18:29:47.000000000 -0400
-+++ libtool-1.5.m4/demo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/demo/Makefile.am libtool-1.5.m4/demo/Makefile.am
---- libtool-1.5/demo/Makefile.am 2002-11-19 04:42:39.000000000 -0500
-+++ libtool-1.5.m4/demo/Makefile.am 2004-05-04 18:00:47.000000000 -0400
-@@ -2,8 +2,6 @@
-
- AUTOMAKE_OPTIONS = no-dependencies foreign
-
--EXTRA_DIST = acinclude.m4
--
- # Build a libtool library, libhello.la for installation in libdir.
- lib_LTLIBRARIES = libhello.la
- libhello_la_SOURCES = hello.c foo.c
-@@ -62,13 +60,6 @@
- # to its private directory.
- objdir = `$(LIBTOOL) --config | sed -n -e 's/^objdir=\(.*\)$$/\1/p'`
-
--# The following rules are only for the libtool demo and tests.
--# Regenerate our acinclude.m4 only if it doesn't exist.
--$(srcdir)/acinclude.m4:
-- rm -f $(srcdir)/acinclude.m4
-- cd $(srcdir) && $(LN_S) ../libtool.m4 acinclude.m4
--
--
- # Test programs to see what gets hardcoded.
- .PHONY: hardcode
- hardcode: $(hardcode_tests)
-diff -urNd -urNd libtool-1.5/depdemo/acinclude.m4 libtool-1.5.m4/depdemo/acinclude.m4
---- libtool-1.5/depdemo/acinclude.m4 2003-04-14 18:29:58.000000000 -0400
-+++ libtool-1.5.m4/depdemo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/f77demo/acinclude.m4 libtool-1.5.m4/f77demo/acinclude.m4
---- libtool-1.5/f77demo/acinclude.m4 2003-04-14 18:30:40.000000000 -0400
-+++ libtool-1.5.m4/f77demo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/libltdl/acinclude.m4 libtool-1.5.m4/libltdl/acinclude.m4
---- libtool-1.5/libltdl/acinclude.m4 2003-04-14 18:29:24.000000000 -0400
-+++ libtool-1.5.m4/libltdl/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,6299 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
--## ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
--## Copyright (C) 1999-2000 Free Software Foundation, Inc.
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 6 AC_LIB_LTDL
--
--# AC_WITH_LTDL
--# ------------
--# Clients of libltdl can use this macro to allow the installer to
--# choose between a shipped copy of the ltdl sources or a preinstalled
--# version of the library.
--AC_DEFUN([AC_WITH_LTDL],
--[AC_REQUIRE([AC_LIB_LTDL])
--AC_SUBST([LIBLTDL])
--AC_SUBST([INCLTDL])
--
--# Unless the user asks us to check, assume no installed ltdl exists.
--use_installed_libltdl=no
--
--AC_ARG_WITH([included_ltdl],
-- [ --with-included-ltdl use the GNU ltdl sources included here])
--
--if test "x$with_included_ltdl" != xyes; then
-- # We are not being forced to use the included libltdl sources, so
-- # decide whether there is a useful installed version we can use.
-- AC_CHECK_HEADER([ltdl.h],
-- [AC_CHECK_LIB([ltdl], [lt_dlcaller_register],
-- [with_included_ltdl=no],
-- [with_included_ltdl=yes])
-- ])
--fi
--
--if test "x$enable_ltdl_install" != xyes; then
-- # If the user did not specify an installable libltdl, then default
-- # to a convenience lib.
-- AC_LIBLTDL_CONVENIENCE
--fi
--
--if test "x$with_included_ltdl" = xno; then
-- # If the included ltdl is not to be used. then Use the
-- # preinstalled libltdl we found.
-- AC_DEFINE([HAVE_LTDL], 1,
-- [Define this if a modern libltdl is already installed])
-- LIBLTDL=-lltdl
--fi
--
--# Report our decision...
--AC_MSG_CHECKING([whether to use included libltdl])
--AC_MSG_RESULT([$with_included_ltdl])
--
--AC_CONFIG_SUBDIRS([libltdl])
--])# AC_WITH_LTDL
--
--
--# AC_LIB_LTDL
--# -----------
--# Perform all the checks necessary for compilation of the ltdl objects
--# -- including compiler checks and header checks.
--AC_DEFUN([AC_LIB_LTDL],
--[AC_PREREQ(2.50)
--AC_REQUIRE([AC_PROG_CC])
--AC_REQUIRE([AC_C_CONST])
--AC_REQUIRE([AC_HEADER_STDC])
--AC_REQUIRE([AC_HEADER_DIRENT])
--AC_REQUIRE([_LT_AC_CHECK_DLFCN])
--AC_REQUIRE([AC_LTDL_ENABLE_INSTALL])
--AC_REQUIRE([AC_LTDL_SHLIBEXT])
--AC_REQUIRE([AC_LTDL_SHLIBPATH])
--AC_REQUIRE([AC_LTDL_SYSSEARCHPATH])
--AC_REQUIRE([AC_LTDL_OBJDIR])
--AC_REQUIRE([AC_LTDL_DLPREOPEN])
--AC_REQUIRE([AC_LTDL_DLLIB])
--AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])
--AC_REQUIRE([AC_LTDL_DLSYM_USCORE])
--AC_REQUIRE([AC_LTDL_SYS_DLOPEN_DEPLIBS])
--AC_REQUIRE([AC_LTDL_FUNC_ARGZ])
--
--AC_CHECK_HEADERS([assert.h ctype.h errno.h malloc.h memory.h stdlib.h \
-- stdio.h unistd.h])
--AC_CHECK_HEADERS([dl.h sys/dl.h dld.h mach-o/dyld.h])
--AC_CHECK_HEADERS([string.h strings.h], [break])
--
--AC_CHECK_FUNCS([strchr index], [break])
--AC_CHECK_FUNCS([strrchr rindex], [break])
--AC_CHECK_FUNCS([memcpy bcopy], [break])
--AC_CHECK_FUNCS([memmove strcmp])
--AC_CHECK_FUNCS([closedir opendir readdir])
--])# AC_LIB_LTDL
--
--
--# AC_LTDL_ENABLE_INSTALL
--# ----------------------
--AC_DEFUN([AC_LTDL_ENABLE_INSTALL],
--[AC_ARG_ENABLE([ltdl-install],
-- [AC_HELP_STRING([--enable-ltdl-install], [install libltdl])])
--
--AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
--AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)
--])])# AC_LTDL_ENABLE_INSTALL
--
--
--# AC_LTDL_SYS_DLOPEN_DEPLIBS
--# --------------------------
--AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
-- [libltdl_cv_sys_dlopen_deplibs],
-- [# PORTME does your system automatically load deplibs for dlopen?
-- # or its logical equivalent (e.g. shl_load for HP-UX < 11)
-- # For now, we just catch OSes we know something about -- in the
-- # future, we'll try test this programmatically.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- case "$host_os" in
-- aix3*|aix4.1.*|aix4.2.*)
-- # Unknown whether this is true for these versions of AIX, but
-- # we want this `case' here to explicitly catch those versions.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- ;;
-- aix[[45]]*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- darwin*)
-- # Assuming the user has installed a libdl from somewhere, this is true
-- # If you are looking for one http://www.opendarwin.org/projects/dlcompat
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- gnu*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- hpux10*|hpux11*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- irix[[12345]]*|irix6.[[01]]*)
-- # Catch all versions of IRIX before 6.2, and indicate that we don't
-- # know how it worked for any of those versions.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- ;;
-- irix*)
-- # The case above catches anything before 6.2, and it's known that
-- # at 6.2 and later dlopen does load deplibs.
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- linux*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- netbsd*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- openbsd*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- osf[[1234]]*)
-- # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
-- # it did *not* use an RPATH in a shared library to find objects the
-- # library depends on, so we explictly say `no'.
-- libltdl_cv_sys_dlopen_deplibs=no
-- ;;
-- osf5.0|osf5.0a|osf5.1)
-- # dlopen *does* load deplibs and with the right loader patch applied
-- # it even uses RPATH in a shared library to search for shared objects
-- # that the library depends on, but there's no easy way to know if that
-- # patch is installed. Since this is the case, all we can really
-- # say is unknown -- it depends on the patch being installed. If
-- # it is, this changes to `yes'. Without it, it would be `no'.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- ;;
-- osf*)
-- # the two cases above should catch all versions of osf <= 5.1. Read
-- # the comments above for what we know about them.
-- # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
-- # is used to find them so we can finally say `yes'.
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- solaris*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- esac
-- ])
--if test "$libltdl_cv_sys_dlopen_deplibs" != yes; then
-- AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1],
-- [Define if the OS needs help to load dependent libraries for dlopen().])
--fi
--])# AC_LTDL_SYS_DLOPEN_DEPLIBS
--
--
--# AC_LTDL_SHLIBEXT
--# ----------------
--AC_DEFUN([AC_LTDL_SHLIBEXT],
--[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
--AC_CACHE_CHECK([which extension is used for loadable modules],
-- [libltdl_cv_shlibext],
--[
--module=yes
--eval libltdl_cv_shlibext=$shrext
-- ])
--if test -n "$libltdl_cv_shlibext"; then
-- AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext",
-- [Define to the extension used for shared libraries, say, ".so".])
--fi
--])# AC_LTDL_SHLIBEXT
--
--
--# AC_LTDL_SHLIBPATH
--# -----------------
--AC_DEFUN([AC_LTDL_SHLIBPATH],
--[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
--AC_CACHE_CHECK([which variable specifies run-time library path],
-- [libltdl_cv_shlibpath_var], [libltdl_cv_shlibpath_var="$shlibpath_var"])
--if test -n "$libltdl_cv_shlibpath_var"; then
-- AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var",
-- [Define to the name of the environment variable that determines the dynamic library search path.])
--fi
--])# AC_LTDL_SHLIBPATH
--
--
--# AC_LTDL_SYSSEARCHPATH
--# ---------------------
--AC_DEFUN([AC_LTDL_SYSSEARCHPATH],
--[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
--AC_CACHE_CHECK([for the default library search path],
-- [libltdl_cv_sys_search_path],
-- [libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"])
--if test -n "$libltdl_cv_sys_search_path"; then
-- sys_search_path=
-- for dir in $libltdl_cv_sys_search_path; do
-- if test -z "$sys_search_path"; then
-- sys_search_path="$dir"
-- else
-- sys_search_path="$sys_search_path$PATH_SEPARATOR$dir"
-- fi
-- done
-- AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path",
-- [Define to the system default library search path.])
--fi
--])# AC_LTDL_SYSSEARCHPATH
--
--
--# AC_LTDL_OBJDIR
--# --------------
--AC_DEFUN([AC_LTDL_OBJDIR],
--[AC_CACHE_CHECK([for objdir],
-- [libltdl_cv_objdir],
-- [libltdl_cv_objdir="$objdir"
-- if test -n "$objdir"; then
-- :
-- else
-- rm -f .libs 2>/dev/null
-- mkdir .libs 2>/dev/null
-- if test -d .libs; then
-- libltdl_cv_objdir=.libs
-- else
-- # MS-DOS does not allow filenames that begin with a dot.
-- libltdl_cv_objdir=_libs
-- fi
-- rmdir .libs 2>/dev/null
-- fi
-- ])
--AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/",
-- [Define to the sub-directory in which libtool stores uninstalled libraries.])
--])# AC_LTDL_OBJDIR
--
--
--# AC_LTDL_DLPREOPEN
--# -----------------
--AC_DEFUN([AC_LTDL_DLPREOPEN],
--[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
--AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
-- [libltdl_cv_preloaded_symbols],
-- [if test -n "$lt_cv_sys_global_symbol_pipe"; then
-- libltdl_cv_preloaded_symbols=yes
-- else
-- libltdl_cv_preloaded_symbols=no
-- fi
-- ])
--if test x"$libltdl_cv_preloaded_symbols" = xyes; then
-- AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1,
-- [Define if libtool can extract symbol lists from object files.])
--fi
--])# AC_LTDL_DLPREOPEN
--
--
--# AC_LTDL_DLLIB
--# -------------
--AC_DEFUN([AC_LTDL_DLLIB],
--[LIBADD_DL=
--AC_SUBST(LIBADD_DL)
--AC_LANG_PUSH([C])
--
--AC_CHECK_FUNC([shl_load],
-- [AC_DEFINE([HAVE_SHL_LOAD], [1],
-- [Define if you have the shl_load function.])],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [AC_DEFINE([HAVE_SHL_LOAD], [1],
-- [Define if you have the shl_load function.])
-- LIBADD_DL="$LIBADD_DL -ldld"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [AC_DEFINE([HAVE_LIBDL], [1],
-- [Define if you have the libdl library or equivalent.])
-- LIBADD_DL="-ldl" libltdl_cv_lib_dl_dlopen="yes"],
-- [AC_TRY_LINK([#if HAVE_DLFCN_H
--# include <dlfcn.h>
--#endif
-- ],
-- [dlopen(0, 0);],
-- [AC_DEFINE([HAVE_LIBDL], [1],
-- [Define if you have the libdl library or equivalent.]) libltdl_cv_func_dlopen="yes"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [AC_DEFINE([HAVE_LIBDL], [1],
-- [Define if you have the libdl library or equivalent.])
-- LIBADD_DL="-lsvld" libltdl_cv_func_dlopen="yes"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [AC_DEFINE([HAVE_DLD], [1],
-- [Define if you have the GNU dld library.])
-- LIBADD_DL="$LIBADD_DL -ldld"],
-- [AC_CHECK_FUNC([_dyld_func_lookup],
-- [AC_DEFINE([HAVE_DYLD], [1],
-- [Define if you have the _dyld_func_lookup function.])])
-- ])
-- ])
-- ])
-- ])
-- ])
--])
--
--if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
--then
-- lt_save_LIBS="$LIBS"
-- LIBS="$LIBS $LIBADD_DL"
-- AC_CHECK_FUNCS([dlerror])
-- LIBS="$lt_save_LIBS"
--fi
--AC_LANG_POP
--])# AC_LTDL_DLLIB
--
--
--# AC_LTDL_SYMBOL_USCORE
--# ---------------------
--# does the compiler prefix global symbols with an underscore?
--AC_DEFUN([AC_LTDL_SYMBOL_USCORE],
--[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
--AC_CACHE_CHECK([for _ prefix in compiled symbols],
-- [ac_cv_sys_symbol_underscore],
-- [ac_cv_sys_symbol_underscore=no
-- cat > conftest.$ac_ext <<EOF
--void nm_test_func(){}
--int main(){nm_test_func;return 0;}
--EOF
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- ac_nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-- # See whether the symbols have a leading underscore.
-- if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-- ac_cv_sys_symbol_underscore=yes
-- else
-- if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-- :
-- else
-- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-- fi
-- fi
-- else
-- echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
-- fi
-- else
-- echo "configure: failed program was:" >&AC_FD_CC
-- cat conftest.c >&AC_FD_CC
-- fi
-- rm -rf conftest*
-- ])
--])# AC_LTDL_SYMBOL_USCORE
--
--
--# AC_LTDL_DLSYM_USCORE
--# --------------------
--AC_DEFUN([AC_LTDL_DLSYM_USCORE],
--[AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])
--if test x"$ac_cv_sys_symbol_underscore" = xyes; then
-- if test x"$libltdl_cv_func_dlopen" = xyes ||
-- test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
-- AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
-- [libltdl_cv_need_uscore],
-- [libltdl_cv_need_uscore=unknown
-- save_LIBS="$LIBS"
-- LIBS="$LIBS $LIBADD_DL"
-- _LT_AC_TRY_DLOPEN_SELF(
-- [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes],
-- [], [libltdl_cv_need_uscore=cross])
-- LIBS="$save_LIBS"
-- ])
-- fi
--fi
--
--if test x"$libltdl_cv_need_uscore" = xyes; then
-- AC_DEFINE(NEED_USCORE, 1,
-- [Define if dlsym() requires a leading underscore in symbol names.])
--fi
--])# AC_LTDL_DLSYM_USCORE
--
--# AC_LTDL_FUNC_ARGZ
--# -----------------
--AC_DEFUN([AC_LTDL_FUNC_ARGZ],
--[AC_CHECK_HEADERS([argz.h])
--
--AC_CHECK_TYPES([error_t],
-- [],
-- [AC_DEFINE([error_t], [int],
-- [Define to a type to use for `error_t' if it is not otherwise available.])],
-- [#if HAVE_ARGZ_H
--# include <argz.h>
--#endif])
--
--AC_CHECK_FUNCS([argz_append argz_create_sep argz_insert argz_next argz_stringify])
--])# AC_LTDL_FUNC_ARGZ
-diff -urNd -urNd libtool-1.5/libtool.m4 libtool-1.5.m4/libtool.m4
---- libtool-1.5/libtool.m4 2003-04-14 17:58:23.000000000 -0400
-+++ libtool-1.5.m4/libtool.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/ltdl.m4 libtool-1.5.m4/ltdl.m4
---- libtool-1.5/ltdl.m4 2003-04-14 17:58:23.000000000 -0400
-+++ libtool-1.5.m4/ltdl.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,432 +0,0 @@
--## ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
--## Copyright (C) 1999-2000 Free Software Foundation, Inc.
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 6 AC_LIB_LTDL
--
--# AC_WITH_LTDL
--# ------------
--# Clients of libltdl can use this macro to allow the installer to
--# choose between a shipped copy of the ltdl sources or a preinstalled
--# version of the library.
--AC_DEFUN([AC_WITH_LTDL],
--[AC_REQUIRE([AC_LIB_LTDL])
--AC_SUBST([LIBLTDL])
--AC_SUBST([INCLTDL])
--
--# Unless the user asks us to check, assume no installed ltdl exists.
--use_installed_libltdl=no
--
--AC_ARG_WITH([included_ltdl],
-- [ --with-included-ltdl use the GNU ltdl sources included here])
--
--if test "x$with_included_ltdl" != xyes; then
-- # We are not being forced to use the included libltdl sources, so
-- # decide whether there is a useful installed version we can use.
-- AC_CHECK_HEADER([ltdl.h],
-- [AC_CHECK_LIB([ltdl], [lt_dlcaller_register],
-- [with_included_ltdl=no],
-- [with_included_ltdl=yes])
-- ])
--fi
--
--if test "x$enable_ltdl_install" != xyes; then
-- # If the user did not specify an installable libltdl, then default
-- # to a convenience lib.
-- AC_LIBLTDL_CONVENIENCE
--fi
--
--if test "x$with_included_ltdl" = xno; then
-- # If the included ltdl is not to be used. then Use the
-- # preinstalled libltdl we found.
-- AC_DEFINE([HAVE_LTDL], 1,
-- [Define this if a modern libltdl is already installed])
-- LIBLTDL=-lltdl
--fi
--
--# Report our decision...
--AC_MSG_CHECKING([whether to use included libltdl])
--AC_MSG_RESULT([$with_included_ltdl])
--
--AC_CONFIG_SUBDIRS([libltdl])
--])# AC_WITH_LTDL
--
--
--# AC_LIB_LTDL
--# -----------
--# Perform all the checks necessary for compilation of the ltdl objects
--# -- including compiler checks and header checks.
--AC_DEFUN([AC_LIB_LTDL],
--[AC_PREREQ(2.50)
--AC_REQUIRE([AC_PROG_CC])
--AC_REQUIRE([AC_C_CONST])
--AC_REQUIRE([AC_HEADER_STDC])
--AC_REQUIRE([AC_HEADER_DIRENT])
--AC_REQUIRE([_LT_AC_CHECK_DLFCN])
--AC_REQUIRE([AC_LTDL_ENABLE_INSTALL])
--AC_REQUIRE([AC_LTDL_SHLIBEXT])
--AC_REQUIRE([AC_LTDL_SHLIBPATH])
--AC_REQUIRE([AC_LTDL_SYSSEARCHPATH])
--AC_REQUIRE([AC_LTDL_OBJDIR])
--AC_REQUIRE([AC_LTDL_DLPREOPEN])
--AC_REQUIRE([AC_LTDL_DLLIB])
--AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])
--AC_REQUIRE([AC_LTDL_DLSYM_USCORE])
--AC_REQUIRE([AC_LTDL_SYS_DLOPEN_DEPLIBS])
--AC_REQUIRE([AC_LTDL_FUNC_ARGZ])
--
--AC_CHECK_HEADERS([assert.h ctype.h errno.h malloc.h memory.h stdlib.h \
-- stdio.h unistd.h])
--AC_CHECK_HEADERS([dl.h sys/dl.h dld.h mach-o/dyld.h])
--AC_CHECK_HEADERS([string.h strings.h], [break])
--
--AC_CHECK_FUNCS([strchr index], [break])
--AC_CHECK_FUNCS([strrchr rindex], [break])
--AC_CHECK_FUNCS([memcpy bcopy], [break])
--AC_CHECK_FUNCS([memmove strcmp])
--AC_CHECK_FUNCS([closedir opendir readdir])
--])# AC_LIB_LTDL
--
--
--# AC_LTDL_ENABLE_INSTALL
--# ----------------------
--AC_DEFUN([AC_LTDL_ENABLE_INSTALL],
--[AC_ARG_ENABLE([ltdl-install],
-- [AC_HELP_STRING([--enable-ltdl-install], [install libltdl])])
--
--AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
--AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)
--])])# AC_LTDL_ENABLE_INSTALL
--
--
--# AC_LTDL_SYS_DLOPEN_DEPLIBS
--# --------------------------
--AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
-- [libltdl_cv_sys_dlopen_deplibs],
-- [# PORTME does your system automatically load deplibs for dlopen?
-- # or its logical equivalent (e.g. shl_load for HP-UX < 11)
-- # For now, we just catch OSes we know something about -- in the
-- # future, we'll try test this programmatically.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- case "$host_os" in
-- aix3*|aix4.1.*|aix4.2.*)
-- # Unknown whether this is true for these versions of AIX, but
-- # we want this `case' here to explicitly catch those versions.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- ;;
-- aix[[45]]*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- darwin*)
-- # Assuming the user has installed a libdl from somewhere, this is true
-- # If you are looking for one http://www.opendarwin.org/projects/dlcompat
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- gnu*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- hpux10*|hpux11*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- irix[[12345]]*|irix6.[[01]]*)
-- # Catch all versions of IRIX before 6.2, and indicate that we don't
-- # know how it worked for any of those versions.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- ;;
-- irix*)
-- # The case above catches anything before 6.2, and it's known that
-- # at 6.2 and later dlopen does load deplibs.
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- linux*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- netbsd*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- openbsd*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- osf[[1234]]*)
-- # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
-- # it did *not* use an RPATH in a shared library to find objects the
-- # library depends on, so we explictly say `no'.
-- libltdl_cv_sys_dlopen_deplibs=no
-- ;;
-- osf5.0|osf5.0a|osf5.1)
-- # dlopen *does* load deplibs and with the right loader patch applied
-- # it even uses RPATH in a shared library to search for shared objects
-- # that the library depends on, but there's no easy way to know if that
-- # patch is installed. Since this is the case, all we can really
-- # say is unknown -- it depends on the patch being installed. If
-- # it is, this changes to `yes'. Without it, it would be `no'.
-- libltdl_cv_sys_dlopen_deplibs=unknown
-- ;;
-- osf*)
-- # the two cases above should catch all versions of osf <= 5.1. Read
-- # the comments above for what we know about them.
-- # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
-- # is used to find them so we can finally say `yes'.
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- solaris*)
-- libltdl_cv_sys_dlopen_deplibs=yes
-- ;;
-- esac
-- ])
--if test "$libltdl_cv_sys_dlopen_deplibs" != yes; then
-- AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1],
-- [Define if the OS needs help to load dependent libraries for dlopen().])
--fi
--])# AC_LTDL_SYS_DLOPEN_DEPLIBS
--
--
--# AC_LTDL_SHLIBEXT
--# ----------------
--AC_DEFUN([AC_LTDL_SHLIBEXT],
--[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
--AC_CACHE_CHECK([which extension is used for loadable modules],
-- [libltdl_cv_shlibext],
--[
--module=yes
--eval libltdl_cv_shlibext=$shrext
-- ])
--if test -n "$libltdl_cv_shlibext"; then
-- AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext",
-- [Define to the extension used for shared libraries, say, ".so".])
--fi
--])# AC_LTDL_SHLIBEXT
--
--
--# AC_LTDL_SHLIBPATH
--# -----------------
--AC_DEFUN([AC_LTDL_SHLIBPATH],
--[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
--AC_CACHE_CHECK([which variable specifies run-time library path],
-- [libltdl_cv_shlibpath_var], [libltdl_cv_shlibpath_var="$shlibpath_var"])
--if test -n "$libltdl_cv_shlibpath_var"; then
-- AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var",
-- [Define to the name of the environment variable that determines the dynamic library search path.])
--fi
--])# AC_LTDL_SHLIBPATH
--
--
--# AC_LTDL_SYSSEARCHPATH
--# ---------------------
--AC_DEFUN([AC_LTDL_SYSSEARCHPATH],
--[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
--AC_CACHE_CHECK([for the default library search path],
-- [libltdl_cv_sys_search_path],
-- [libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"])
--if test -n "$libltdl_cv_sys_search_path"; then
-- sys_search_path=
-- for dir in $libltdl_cv_sys_search_path; do
-- if test -z "$sys_search_path"; then
-- sys_search_path="$dir"
-- else
-- sys_search_path="$sys_search_path$PATH_SEPARATOR$dir"
-- fi
-- done
-- AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path",
-- [Define to the system default library search path.])
--fi
--])# AC_LTDL_SYSSEARCHPATH
--
--
--# AC_LTDL_OBJDIR
--# --------------
--AC_DEFUN([AC_LTDL_OBJDIR],
--[AC_CACHE_CHECK([for objdir],
-- [libltdl_cv_objdir],
-- [libltdl_cv_objdir="$objdir"
-- if test -n "$objdir"; then
-- :
-- else
-- rm -f .libs 2>/dev/null
-- mkdir .libs 2>/dev/null
-- if test -d .libs; then
-- libltdl_cv_objdir=.libs
-- else
-- # MS-DOS does not allow filenames that begin with a dot.
-- libltdl_cv_objdir=_libs
-- fi
-- rmdir .libs 2>/dev/null
-- fi
-- ])
--AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/",
-- [Define to the sub-directory in which libtool stores uninstalled libraries.])
--])# AC_LTDL_OBJDIR
--
--
--# AC_LTDL_DLPREOPEN
--# -----------------
--AC_DEFUN([AC_LTDL_DLPREOPEN],
--[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
--AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
-- [libltdl_cv_preloaded_symbols],
-- [if test -n "$lt_cv_sys_global_symbol_pipe"; then
-- libltdl_cv_preloaded_symbols=yes
-- else
-- libltdl_cv_preloaded_symbols=no
-- fi
-- ])
--if test x"$libltdl_cv_preloaded_symbols" = xyes; then
-- AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1,
-- [Define if libtool can extract symbol lists from object files.])
--fi
--])# AC_LTDL_DLPREOPEN
--
--
--# AC_LTDL_DLLIB
--# -------------
--AC_DEFUN([AC_LTDL_DLLIB],
--[LIBADD_DL=
--AC_SUBST(LIBADD_DL)
--AC_LANG_PUSH([C])
--
--AC_CHECK_FUNC([shl_load],
-- [AC_DEFINE([HAVE_SHL_LOAD], [1],
-- [Define if you have the shl_load function.])],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [AC_DEFINE([HAVE_SHL_LOAD], [1],
-- [Define if you have the shl_load function.])
-- LIBADD_DL="$LIBADD_DL -ldld"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [AC_DEFINE([HAVE_LIBDL], [1],
-- [Define if you have the libdl library or equivalent.])
-- LIBADD_DL="-ldl" libltdl_cv_lib_dl_dlopen="yes"],
-- [AC_TRY_LINK([#if HAVE_DLFCN_H
--# include <dlfcn.h>
--#endif
-- ],
-- [dlopen(0, 0);],
-- [AC_DEFINE([HAVE_LIBDL], [1],
-- [Define if you have the libdl library or equivalent.]) libltdl_cv_func_dlopen="yes"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [AC_DEFINE([HAVE_LIBDL], [1],
-- [Define if you have the libdl library or equivalent.])
-- LIBADD_DL="-lsvld" libltdl_cv_func_dlopen="yes"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [AC_DEFINE([HAVE_DLD], [1],
-- [Define if you have the GNU dld library.])
-- LIBADD_DL="$LIBADD_DL -ldld"],
-- [AC_CHECK_FUNC([_dyld_func_lookup],
-- [AC_DEFINE([HAVE_DYLD], [1],
-- [Define if you have the _dyld_func_lookup function.])])
-- ])
-- ])
-- ])
-- ])
-- ])
--])
--
--if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
--then
-- lt_save_LIBS="$LIBS"
-- LIBS="$LIBS $LIBADD_DL"
-- AC_CHECK_FUNCS([dlerror])
-- LIBS="$lt_save_LIBS"
--fi
--AC_LANG_POP
--])# AC_LTDL_DLLIB
--
--
--# AC_LTDL_SYMBOL_USCORE
--# ---------------------
--# does the compiler prefix global symbols with an underscore?
--AC_DEFUN([AC_LTDL_SYMBOL_USCORE],
--[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
--AC_CACHE_CHECK([for _ prefix in compiled symbols],
-- [ac_cv_sys_symbol_underscore],
-- [ac_cv_sys_symbol_underscore=no
-- cat > conftest.$ac_ext <<EOF
--void nm_test_func(){}
--int main(){nm_test_func;return 0;}
--EOF
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- ac_nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-- # See whether the symbols have a leading underscore.
-- if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-- ac_cv_sys_symbol_underscore=yes
-- else
-- if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-- :
-- else
-- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-- fi
-- fi
-- else
-- echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
-- fi
-- else
-- echo "configure: failed program was:" >&AC_FD_CC
-- cat conftest.c >&AC_FD_CC
-- fi
-- rm -rf conftest*
-- ])
--])# AC_LTDL_SYMBOL_USCORE
--
--
--# AC_LTDL_DLSYM_USCORE
--# --------------------
--AC_DEFUN([AC_LTDL_DLSYM_USCORE],
--[AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])
--if test x"$ac_cv_sys_symbol_underscore" = xyes; then
-- if test x"$libltdl_cv_func_dlopen" = xyes ||
-- test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
-- AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
-- [libltdl_cv_need_uscore],
-- [libltdl_cv_need_uscore=unknown
-- save_LIBS="$LIBS"
-- LIBS="$LIBS $LIBADD_DL"
-- _LT_AC_TRY_DLOPEN_SELF(
-- [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes],
-- [], [libltdl_cv_need_uscore=cross])
-- LIBS="$save_LIBS"
-- ])
-- fi
--fi
--
--if test x"$libltdl_cv_need_uscore" = xyes; then
-- AC_DEFINE(NEED_USCORE, 1,
-- [Define if dlsym() requires a leading underscore in symbol names.])
--fi
--])# AC_LTDL_DLSYM_USCORE
--
--# AC_LTDL_FUNC_ARGZ
--# -----------------
--AC_DEFUN([AC_LTDL_FUNC_ARGZ],
--[AC_CHECK_HEADERS([argz.h])
--
--AC_CHECK_TYPES([error_t],
-- [],
-- [AC_DEFINE([error_t], [int],
-- [Define to a type to use for `error_t' if it is not otherwise available.])],
-- [#if HAVE_ARGZ_H
--# include <argz.h>
--#endif])
--
--AC_CHECK_FUNCS([argz_append argz_create_sep argz_insert argz_next argz_stringify])
--])# AC_LTDL_FUNC_ARGZ
-diff -urNd -urNd libtool-1.5/m4/libtool.m4 libtool-1.5.m4/m4/libtool.m4
---- libtool-1.5/m4/libtool.m4 1969-12-31 19:00:00.000000000 -0500
-+++ libtool-1.5.m4/m4/libtool.m4 2004-05-04 17:59:48.000000000 -0400
-@@ -0,0 +1,5867 @@
-+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-+## Free Software Foundation, Inc.
-+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+##
-+## This program is free software; you can redistribute it and/or modify
-+## it under the terms of the GNU General Public License as published by
-+## the Free Software Foundation; either version 2 of the License, or
-+## (at your option) any later version.
-+##
-+## This program is distributed in the hope that it will be useful, but
-+## WITHOUT ANY WARRANTY; without even the implied warranty of
-+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+## General Public License for more details.
-+##
-+## You should have received a copy of the GNU General Public License
-+## along with this program; if not, write to the Free Software
-+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+##
-+## As a special exception to the GNU General Public License, if you
-+## distribute this file as part of a program that contains a
-+## configuration script generated by Autoconf, you may include it under
-+## the same distribution terms that you use for the rest of that program.
-+
-+# serial 47 AC_PROG_LIBTOOL
-+
-+
-+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-+# -----------------------------------------------------------
-+# If this macro is not defined by Autoconf, define it here.
-+m4_ifdef([AC_PROVIDE_IFELSE],
-+ [],
-+ [m4_define([AC_PROVIDE_IFELSE],
-+ [m4_ifdef([AC_PROVIDE_$1],
-+ [$2], [$3])])])
-+
-+
-+# AC_PROG_LIBTOOL
-+# ---------------
-+AC_DEFUN([AC_PROG_LIBTOOL],
-+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
-+ [AC_LIBTOOL_CXX],
-+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-+ ])])
-+dnl And a similar setup for Fortran 77 support
-+ AC_PROVIDE_IFELSE([AC_PROG_F77],
-+ [AC_LIBTOOL_F77],
-+ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-+])])
-+
-+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [ifdef([AC_PROG_GCJ],
-+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-+ ifdef([A][M_PROG_GCJ],
-+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-+ ifdef([LT_AC_PROG_GCJ],
-+ [define([LT_AC_PROG_GCJ],
-+ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-+])])# AC_PROG_LIBTOOL
-+
-+
-+# _AC_PROG_LIBTOOL
-+# ----------------
-+AC_DEFUN([_AC_PROG_LIBTOOL],
-+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+AC_SUBST(LIBTOOL)dnl
-+
-+# Prevent multiple expansion
-+define([AC_PROG_LIBTOOL], [])
-+])# _AC_PROG_LIBTOOL
-+
-+
-+# AC_LIBTOOL_SETUP
-+# ----------------
-+AC_DEFUN([AC_LIBTOOL_SETUP],
-+[AC_PREREQ(2.50)dnl
-+AC_REQUIRE([AC_ENABLE_SHARED])dnl
-+AC_REQUIRE([AC_ENABLE_STATIC])dnl
-+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_PROG_LD])dnl
-+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-+AC_REQUIRE([AC_PROG_NM])dnl
-+
-+AC_REQUIRE([AC_PROG_LN_S])dnl
-+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+AC_REQUIRE([AC_OBJEXT])dnl
-+AC_REQUIRE([AC_EXEEXT])dnl
-+dnl
-+
-+AC_LIBTOOL_SYS_MAX_CMD_LEN
-+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+AC_LIBTOOL_OBJDIR
-+
-+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+_LT_AC_PROG_ECHO_BACKSLASH
-+
-+case $host_os in
-+aix3*)
-+ # AIX sometimes has problems with the GCC collect2 program. For some
-+ # reason, if we set the COLLECT_NAMES environment variable, the problems
-+ # vanish in a puff of smoke.
-+ if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+ fi
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e s/^X//'
-+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-+
-+# Same as above, but do not quote variable references.
-+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except M$VC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+AC_CHECK_TOOL(AR, ar, false)
-+AC_CHECK_TOOL(RANLIB, ranlib, :)
-+AC_CHECK_TOOL(STRIP, strip, :)
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-+ ;;
-+ *)
-+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-+ ;;
-+ esac
-+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ AC_PATH_MAGIC
-+ fi
-+ ;;
-+esac
-+
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-+enable_win32_dll=yes, enable_win32_dll=no)
-+
-+AC_ARG_ENABLE([libtool-lock],
-+ [AC_HELP_STRING([--disable-libtool-lock],
-+ [avoid locking (might break parallel builds)])])
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+AC_ARG_WITH([pic],
-+ [AC_HELP_STRING([--with-pic],
-+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-+ [pic_mode="$withval"],
-+ [pic_mode=default])
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+AC_LIBTOOL_LANG_C_CONFIG
-+_LT_AC_TAGCONFIG
-+])# AC_LIBTOOL_SETUP
-+
-+
-+# _LT_AC_SYS_COMPILER
-+# -------------------
-+AC_DEFUN([_LT_AC_SYS_COMPILER],
-+[AC_REQUIRE([AC_PROG_CC])dnl
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+])# _LT_AC_SYS_COMPILER
-+
-+
-+# _LT_AC_SYS_LIBPATH_AIX
-+# ----------------------
-+# Links a minimal program and checks the executable
-+# for the system default hardcoded library path. In most cases,
-+# this is /usr/lib:/lib, but when the MPI compilers are used
-+# the location of the communication and MPI libs are included too.
-+# If we don't find anything, use the default library path according
-+# to the aix ld manual.
-+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi],[])
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+])# _LT_AC_SYS_LIBPATH_AIX
-+
-+
-+# _LT_AC_SHELL_INIT(ARG)
-+# ----------------------
-+AC_DEFUN([_LT_AC_SHELL_INIT],
-+[ifdef([AC_DIVERSION_NOTICE],
-+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-+ [AC_DIVERT_PUSH(NOTICE)])
-+$1
-+AC_DIVERT_POP
-+])# _LT_AC_SHELL_INIT
-+
-+
-+# _LT_AC_PROG_ECHO_BACKSLASH
-+# --------------------------
-+# Add some code to the start of the generated configure script which
-+# will find an echo command which doesn't interpret backslashes.
-+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-+[_LT_AC_SHELL_INIT([
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X[$]1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X[$]1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+fi
-+
-+if test "X[$]1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+[$]*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-+ echo_test_string="`eval $cmd`" &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "[$]0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-+fi
-+
-+AC_SUBST(ECHO)
-+])])# _LT_AC_PROG_ECHO_BACKSLASH
-+
-+
-+# _LT_AC_LOCK
-+# -----------
-+AC_DEFUN([_LT_AC_LOCK],
-+[AC_ARG_ENABLE([libtool-lock],
-+ [AC_HELP_STRING([--disable-libtool-lock],
-+ [avoid locking (might break parallel builds)])])
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *ELF-32*)
-+ HPUX_IA64_MODE="32"
-+ ;;
-+ *ELF-64*)
-+ HPUX_IA64_MODE="64"
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+*-*-irix6*)
-+ # Find out which ABI we are using.
-+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -melf32bsmip"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -melf32bmipn32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -melf64bmip"
-+ ;;
-+ esac
-+ else
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -32"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -n32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -64"
-+ ;;
-+ esac
-+ fi
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case "`/usr/bin/file conftest.o`" in
-+ *32-bit*)
-+ case $host in
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_i386"
-+ ;;
-+ ppc64-*linux*)
-+ LD="${LD-ld} -m elf32ppclinux"
-+ ;;
-+ s390x-*linux*)
-+ LD="${LD-ld} -m elf_s390"
-+ ;;
-+ sparc64-*linux*)
-+ LD="${LD-ld} -m elf32_sparc"
-+ ;;
-+ esac
-+ ;;
-+ *64-bit*)
-+ case $host in
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_x86_64"
-+ ;;
-+ ppc*-*linux*|powerpc*-*linux*)
-+ LD="${LD-ld} -m elf64ppc"
-+ ;;
-+ s390*-*linux*)
-+ LD="${LD-ld} -m elf64_s390"
-+ ;;
-+ sparc*-*linux*)
-+ LD="${LD-ld} -m elf64_sparc"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+*-*-sco3.2v5*)
-+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+ SAVE_CFLAGS="$CFLAGS"
-+ CFLAGS="$CFLAGS -belf"
-+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-+ [AC_LANG_PUSH(C)
-+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-+ AC_LANG_POP])
-+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+ CFLAGS="$SAVE_CFLAGS"
-+ fi
-+ ;;
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-+ AC_CHECK_TOOL(AS, as, false)
-+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
-+ ;;
-+ ])
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+])# _LT_AC_LOCK
-+
-+
-+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-+# ----------------------------------------------------------------
-+# Check whether the given compiler option works
-+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-+[AC_CACHE_CHECK([$1], [$2],
-+ [$2=no
-+ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$3"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&AS_MESSAGE_LOG_FD
-+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test ! -s conftest.err; then
-+ $2=yes
-+ fi
-+ fi
-+ $rm conftest*
-+])
-+
-+if test x"[$]$2" = xyes; then
-+ ifelse([$5], , :, [$5])
-+else
-+ ifelse([$6], , :, [$6])
-+fi
-+])# AC_LIBTOOL_COMPILER_OPTION
-+
-+
-+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-+# [ACTION-SUCCESS], [ACTION-FAILURE])
-+# ------------------------------------------------------------
-+# Check whether the given compiler option works
-+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-+[AC_CACHE_CHECK([$1], [$2],
-+ [$2=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $3"
-+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
-+ else
-+ $2=yes
-+ fi
-+ fi
-+ $rm conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+])
-+
-+if test x"[$]$2" = xyes; then
-+ ifelse([$4], , :, [$4])
-+else
-+ ifelse([$5], , :, [$5])
-+fi
-+])# AC_LIBTOOL_LINKER_OPTION
-+
-+
-+# AC_LIBTOOL_SYS_MAX_CMD_LEN
-+# --------------------------
-+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-+[# find the maximum length of command line arguments
-+AC_MSG_CHECKING([the maximum length of command line arguments])
-+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-+ i=0
-+ testring="ABCD"
-+
-+ case $build_os in
-+ msdosdjgpp*)
-+ # On DJGPP, this test can blow up pretty badly due to problems in libc
-+ # (any single argument exceeding 2000 bytes causes a buffer overrun
-+ # during glob expansion). Even if it were fixed, the result of this
-+ # check would be larger than it should be.
-+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
-+ ;;
-+
-+ gnu*)
-+ # Under GNU Hurd, this test is not required because there is
-+ # no limit to the length of command line arguments.
-+ # Libtool will interpret -1 as no limit whatsoever
-+ lt_cv_sys_max_cmd_len=-1;
-+ ;;
-+
-+ cygwin* | mingw*)
-+ # On Win9x/ME, this test blows up -- it succeeds, but takes
-+ # about 5 minutes as the teststring grows exponentially.
-+ # Worse, since 9x/ME are not pre-emptively multitasking,
-+ # you end up with a "frozen" computer, even though with patience
-+ # the test eventually succeeds (with a max line length of 256k).
-+ # Instead, let's just punt: use the minimum linelength reported by
-+ # all of the supported platforms: 8192 (on NT/2K/XP).
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ *)
-+ # If test is not a shell built-in, we'll probably end up computing a
-+ # maximum length that is only half of the actual maximum length, but
-+ # we can't tell.
-+ while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-+ = "XX$testring") >/dev/null 2>&1 &&
-+ new_result=`expr "X$testring" : ".*" 2>&1` &&
-+ lt_cv_sys_max_cmd_len=$new_result &&
-+ test $i != 17 # 1/2 MB should be enough
-+ do
-+ i=`expr $i + 1`
-+ testring=$testring$testring
-+ done
-+ testring=
-+ # Add a significant safety factor because C++ compilers can tack on massive
-+ # amounts of additional arguments before passing them to the linker.
-+ # It appears as though 1/2 is a usable value.
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+ ;;
-+ esac
-+])
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-+else
-+ AC_MSG_RESULT(none)
-+fi
-+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-+
-+
-+# _LT_AC_CHECK_DLFCN
-+# --------------------
-+AC_DEFUN([_LT_AC_CHECK_DLFCN],
-+[AC_CHECK_HEADERS(dlfcn.h)dnl
-+])# _LT_AC_CHECK_DLFCN
-+
-+
-+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-+# ------------------------------------------------------------------
-+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-+if test "$cross_compiling" = yes; then :
-+ [$4]
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+[#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+
-+ exit (status);
-+}]
-+EOF
-+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) $1 ;;
-+ x$lt_dlneed_uscore) $2 ;;
-+ x$lt_unknown|x*) $3 ;;
-+ esac
-+ else :
-+ # compilation failed
-+ $3
-+ fi
-+fi
-+rm -fr conftest*
-+])# _LT_AC_TRY_DLOPEN_SELF
-+
-+
-+# AC_LIBTOOL_DLOPEN_SELF
-+# -------------------
-+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-+if test "x$enable_dlopen" != xyes; then
-+ enable_dlopen=unknown
-+ enable_dlopen_self=unknown
-+ enable_dlopen_self_static=unknown
-+else
-+ lt_cv_dlopen=no
-+ lt_cv_dlopen_libs=
-+
-+ case $host_os in
-+ beos*)
-+ lt_cv_dlopen="load_add_on"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ;;
-+
-+ mingw* | pw32*)
-+ lt_cv_dlopen="LoadLibrary"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ cygwin*)
-+ lt_cv_dlopen="dlopen"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ darwin*)
-+ # if libdl is installed we need to link against it
-+ AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-+ lt_cv_dlopen="dyld"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ])
-+ ;;
-+
-+ *)
-+ AC_CHECK_FUNC([shl_load],
-+ [lt_cv_dlopen="shl_load"],
-+ [AC_CHECK_LIB([dld], [shl_load],
-+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-+ [AC_CHECK_FUNC([dlopen],
-+ [lt_cv_dlopen="dlopen"],
-+ [AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-+ [AC_CHECK_LIB([svld], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-+ [AC_CHECK_LIB([dld], [dld_link],
-+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ;;
-+ esac
-+
-+ if test "x$lt_cv_dlopen" != xno; then
-+ enable_dlopen=yes
-+ else
-+ enable_dlopen=no
-+ fi
-+
-+ case $lt_cv_dlopen in
-+ dlopen)
-+ save_CPPFLAGS="$CPPFLAGS"
-+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+ save_LDFLAGS="$LDFLAGS"
-+ eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+ save_LIBS="$LIBS"
-+ LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+ AC_CACHE_CHECK([whether a program can dlopen itself],
-+ lt_cv_dlopen_self, [dnl
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-+ ])
-+
-+ if test "x$lt_cv_dlopen_self" = xyes; then
-+ LDFLAGS="$LDFLAGS $link_static_flag"
-+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-+ lt_cv_dlopen_self_static, [dnl
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-+ ])
-+ fi
-+
-+ CPPFLAGS="$save_CPPFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+ LIBS="$save_LIBS"
-+ ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self in
-+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+ *) enable_dlopen_self=unknown ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self_static in
-+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+ *) enable_dlopen_self_static=unknown ;;
-+ esac
-+fi
-+])# AC_LIBTOOL_DLOPEN_SELF
-+
-+
-+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-+# ---------------------------------
-+# Check to see if options -c and -o are simultaneously supported by compiler
-+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-+ # that will create temporary files in the current directory regardless of
-+ # the output directory. Thus, making CWD read-only will cause this test
-+ # to fail, enabling locking or at least warning the user not to do parallel
-+ # builds.
-+ chmod -w .
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
-+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test ! -s out/conftest.err; then
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-+ fi
-+ fi
-+ chmod u+w .
-+ $rm conftest* out/*
-+ rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+])
-+])# AC_LIBTOOL_PROG_CC_C_O
-+
-+
-+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-+# -----------------------------------------
-+# Check to see if we can do hard links to lock some files if needed
-+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-+[AC_REQUIRE([_LT_AC_LOCK])dnl
-+
-+hard_links="nottested"
-+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ AC_MSG_CHECKING([if we can lock with hard links])
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ AC_MSG_RESULT([$hard_links])
-+ if test "$hard_links" = no; then
-+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-+
-+
-+# AC_LIBTOOL_OBJDIR
-+# -----------------
-+AC_DEFUN([AC_LIBTOOL_OBJDIR],
-+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-+[rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+ lt_cv_objdir=.libs
-+else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null])
-+objdir=$lt_cv_objdir
-+])# AC_LIBTOOL_OBJDIR
-+
-+
-+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-+# ----------------------------------------------
-+# Check hardcoding attributes.
-+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-+[AC_MSG_CHECKING([how to hardcode library paths into programs])
-+_LT_AC_TAGVAR(hardcode_action, $1)=
-+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-+ test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-+ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-+ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-+fi
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-+
-+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-+
-+
-+# AC_LIBTOOL_SYS_LIB_STRIP
-+# ------------------------
-+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-+[striplib=
-+old_striplib=
-+AC_MSG_CHECKING([whether stripping libraries is possible])
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+ AC_MSG_RESULT([yes])
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+ case $host_os in
-+ darwin*)
-+ if test -n "$STRIP" ; then
-+ striplib="$STRIP -x"
-+ AC_MSG_RESULT([yes])
-+ else
-+ AC_MSG_RESULT([no])
-+fi
-+ ;;
-+ *)
-+ AC_MSG_RESULT([no])
-+ ;;
-+ esac
-+fi
-+])# AC_LIBTOOL_SYS_LIB_STRIP
-+
-+
-+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-+# -----------------------------
-+# PORTME Fill in your ld.so characteristics
-+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-+[AC_MSG_CHECKING([dynamic linker characteristics])
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix4* | aix5*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[[01]] | aix4.[[01]].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi4*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ # FIXME: Relying on posixy $() will cause problems for
-+ # cross-compilation, but unfortunately the echo tests do not
-+ # yet detect zsh echo's removal of \ escapes.
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+freebsd*)
-+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ *) # from 3.2 on
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case "$host_cpu" in
-+ ia64*)
-+ shrext='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[[89]] | openbsd2.[[89]].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+sco3.2v5*)
-+ version_type=osf
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$dynamic_linker])
-+test "$dynamic_linker" = no && can_build_shared=no
-+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-+
-+
-+# _LT_AC_TAGCONFIG
-+# ----------------
-+AC_DEFUN([_LT_AC_TAGCONFIG],
-+[AC_ARG_WITH([tags],
-+ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-+ [include additional configurations @<:@automatic@:>@])],
-+ [tagnames="$withval"])
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+ if test ! -f "${ofile}"; then
-+ AC_MSG_WARN([output file `$ofile' does not exist])
-+ fi
-+
-+ if test -z "$LTCC"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+ if test -z "$LTCC"; then
-+ AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-+ else
-+ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-+ fi
-+ fi
-+
-+ # Extract list of available tagged configurations in $ofile.
-+ # Note that this assumes the entire list is on one line.
-+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for tagname in $tagnames; do
-+ IFS="$lt_save_ifs"
-+ # Check whether tagname contains only valid characters
-+ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-+ "") ;;
-+ *) AC_MSG_ERROR([invalid tag name: $tagname])
-+ ;;
-+ esac
-+
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+ then
-+ AC_MSG_ERROR([tag name \"$tagname\" already exists])
-+ fi
-+
-+ # Update the list of available tags.
-+ if test -n "$tagname"; then
-+ echo appending configuration tag \"$tagname\" to $ofile
-+
-+ case $tagname in
-+ CXX)
-+ if test -n "$CXX" && test "X$CXX" != "Xno"; then
-+ AC_LIBTOOL_LANG_CXX_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ F77)
-+ if test -n "$F77" && test "X$F77" != "Xno"; then
-+ AC_LIBTOOL_LANG_F77_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ GCJ)
-+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+ AC_LIBTOOL_LANG_GCJ_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ RC)
-+ AC_LIBTOOL_LANG_RC_CONFIG
-+ ;;
-+
-+ *)
-+ AC_MSG_ERROR([Unsupported tag name: $tagname])
-+ ;;
-+ esac
-+
-+ # Append the new tag name to the list of available tags.
-+ if test -n "$tagname" ; then
-+ available_tags="$available_tags $tagname"
-+ fi
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ # Now substitute the updated list of available tags.
-+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+ mv "${ofile}T" "$ofile"
-+ chmod +x "$ofile"
-+ else
-+ rm -f "${ofile}T"
-+ AC_MSG_ERROR([unable to update list of available tagged configurations.])
-+ fi
-+fi
-+])# _LT_AC_TAGCONFIG
-+
-+
-+# AC_LIBTOOL_DLOPEN
-+# -----------------
-+# enable checks for dlopen support
-+AC_DEFUN([AC_LIBTOOL_DLOPEN],
-+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-+])# AC_LIBTOOL_DLOPEN
-+
-+
-+# AC_LIBTOOL_WIN32_DLL
-+# --------------------
-+# declare package support for building win32 dll's
-+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-+])# AC_LIBTOOL_WIN32_DLL
-+
-+
-+# AC_ENABLE_SHARED([DEFAULT])
-+# ---------------------------
-+# implement the --enable-shared flag
-+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-+AC_DEFUN([AC_ENABLE_SHARED],
-+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([shared],
-+ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-+ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_shared=yes ;;
-+ no) enable_shared=no ;;
-+ *)
-+ enable_shared=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_shared=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-+])# AC_ENABLE_SHARED
-+
-+
-+# AC_DISABLE_SHARED
-+# -----------------
-+#- set the default shared flag to --disable-shared
-+AC_DEFUN([AC_DISABLE_SHARED],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_SHARED(no)
-+])# AC_DISABLE_SHARED
-+
-+
-+# AC_ENABLE_STATIC([DEFAULT])
-+# ---------------------------
-+# implement the --enable-static flag
-+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-+AC_DEFUN([AC_ENABLE_STATIC],
-+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([static],
-+ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-+ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_static=yes ;;
-+ no) enable_static=no ;;
-+ *)
-+ enable_static=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_static=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-+])# AC_ENABLE_STATIC
-+
-+
-+# AC_DISABLE_STATIC
-+# -----------------
-+# set the default static flag to --disable-static
-+AC_DEFUN([AC_DISABLE_STATIC],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_STATIC(no)
-+])# AC_DISABLE_STATIC
-+
-+
-+# AC_ENABLE_FAST_INSTALL([DEFAULT])
-+# ---------------------------------
-+# implement the --enable-fast-install flag
-+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([fast-install],
-+ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-+ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_fast_install=yes ;;
-+ no) enable_fast_install=no ;;
-+ *)
-+ enable_fast_install=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_fast_install=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-+])# AC_ENABLE_FAST_INSTALL
-+
-+
-+# AC_DISABLE_FAST_INSTALL
-+# -----------------------
-+# set the default to --disable-fast-install
-+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_FAST_INSTALL(no)
-+])# AC_DISABLE_FAST_INSTALL
-+
-+
-+# AC_LIBTOOL_PICMODE([MODE])
-+# --------------------------
-+# implement the --with-pic flag
-+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-+AC_DEFUN([AC_LIBTOOL_PICMODE],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+pic_mode=ifelse($#,1,$1,default)
-+])# AC_LIBTOOL_PICMODE
-+
-+
-+# AC_PROG_EGREP
-+# -------------
-+# This is predefined starting with Autoconf 2.54, so this conditional
-+# definition can be removed once we require Autoconf 2.54 or later.
-+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-+ [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-+ then ac_cv_prog_egrep='grep -E'
-+ else ac_cv_prog_egrep='egrep'
-+ fi])
-+ EGREP=$ac_cv_prog_egrep
-+ AC_SUBST([EGREP])
-+])])
-+
-+
-+# AC_PATH_TOOL_PREFIX
-+# -------------------
-+# find a file program which can recognise shared library
-+AC_DEFUN([AC_PATH_TOOL_PREFIX],
-+[AC_REQUIRE([AC_PROG_EGREP])dnl
-+AC_MSG_CHECKING([for $1])
-+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-+[case $MAGIC_CMD in
-+[[\\/*] | ?:[\\/]*])
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+dnl $ac_dummy forces splitting on constant user-supplied paths.
-+dnl POSIX.2 word splitting is done only on the output of word expansions,
-+dnl not every word. This closes a longstanding sh security hole.
-+ ac_dummy="ifelse([$2], , $PATH, [$2])"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/$1; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool@gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac])
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ AC_MSG_RESULT($MAGIC_CMD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+])# AC_PATH_TOOL_PREFIX
-+
-+
-+# AC_PATH_MAGIC
-+# -------------
-+# find a file program which can recognise a shared library
-+AC_DEFUN([AC_PATH_MAGIC],
-+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+ if test -n "$ac_tool_prefix"; then
-+ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-+ else
-+ MAGIC_CMD=:
-+ fi
-+fi
-+])# AC_PATH_MAGIC
-+
-+
-+# AC_PROG_LD
-+# ----------
-+# find the path to the GNU or non-GNU linker
-+AC_DEFUN([AC_PROG_LD],
-+[AC_ARG_WITH([gnu-ld],
-+ [AC_HELP_STRING([--with-gnu-ld],
-+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-+ [test "$withval" = no || with_gnu_ld=yes],
-+ [with_gnu_ld=no])
-+AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ AC_MSG_CHECKING([for ld used by $CC])
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [[\\/]]* | ?:[[\\/]]*)
-+ re_direlt='/[[^/]][[^/]]*/\.\./'
-+ # Canonicalize the path of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ AC_MSG_CHECKING([for GNU ld])
-+else
-+ AC_MSG_CHECKING([for non-GNU ld])
-+fi
-+AC_CACHE_VAL(lt_cv_path_LD,
-+[if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some GNU ld's only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi])
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ AC_MSG_RESULT($LD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-+AC_PROG_LD_GNU
-+])# AC_PROG_LD
-+
-+
-+# AC_PROG_LD_GNU
-+# --------------
-+AC_DEFUN([AC_PROG_LD_GNU],
-+[AC_REQUIRE([AC_PROG_EGREP])dnl
-+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-+case `"$LD" -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac])
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+])# AC_PROG_LD_GNU
-+
-+
-+# AC_PROG_LD_RELOAD_FLAG
-+# ----------------------
-+# find reload flag for linker
-+# -- PORTME Some linkers may need a different reload flag.
-+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-+[AC_CACHE_CHECK([for $LD option to reload object files],
-+ lt_cv_ld_reload_flag,
-+ [lt_cv_ld_reload_flag='-r'])
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+])# AC_PROG_LD_RELOAD_FLAG
-+
-+
-+# AC_DEPLIBS_CHECK_METHOD
-+# -----------------------
-+# how to check for library dependencies
-+# -- PORTME fill in with the dynamic library characteristics
-+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-+[AC_CACHE_CHECK([how to recognise dependent libraries],
-+lt_cv_deplibs_check_method,
-+[lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix4* | aix5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+beos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+bsdi4*)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ # win32_libid is a shell function defined in ltmain.sh
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='win32_libid'
-+ ;;
-+
-+darwin* | rhapsody*)
-+ # this will be overwritten by pass_all, but leave it in just in case
-+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ case "$host_os" in
-+ rhapsody* | darwin1.[[012]])
-+ lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-+ ;;
-+ *) # Darwin 1.3 on
-+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-+ ;;
-+ esac
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+freebsd*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ case $host_cpu in
-+ i*86 )
-+ # Not sure whether the presence of OpenBSD here was a mistake.
-+ # Let's accept both of them until this is cleared up.
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ ;;
-+ esac
-+ else
-+ lt_cv_deplibs_check_method=pass_all
-+ fi
-+ ;;
-+
-+gnu*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+hpux10.20* | hpux11*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ case "$host_cpu" in
-+ ia64*)
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+ ;;
-+ hppa*64*)
-+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+ ;;
-+ *)
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+ ;;
-+ esac
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ # this will be overridden with pass_all, but let us keep it just in case
-+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-+ ;;
-+ *)
-+ case $LD in
-+ *-32|*"-32 ") libmagic=32-bit;;
-+ *-n32|*"-n32 ") libmagic=N32;;
-+ *-64|*"-64 ") libmagic=64-bit;;
-+ *) libmagic=never-match;;
-+ esac
-+ # this will be overridden with pass_all, but let us keep it just in case
-+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-+ ;;
-+ esac
-+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ case $host_cpu in
-+ alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-+ lt_cv_deplibs_check_method=pass_all ;;
-+ *)
-+ # glibc up to 2.1.1 does not perform some relocations on ARM
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-+ esac
-+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-+ ;;
-+
-+netbsd*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-+ fi
-+ ;;
-+
-+newos6*)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+ ;;
-+
-+nto-qnx)
-+ lt_cv_deplibs_check_method=unknown
-+ ;;
-+
-+openbsd*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-+ else
-+ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-+ fi
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ # this will be overridden with pass_all, but let us keep it just in case
-+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+sco3.2v5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+solaris*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+
-+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+ case $host_vendor in
-+ motorola)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+ ;;
-+ ncr)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ sequent)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-+ ;;
-+ sni)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ esac
-+ ;;
-+
-+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+esac
-+])
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+])# AC_DEPLIBS_CHECK_METHOD
-+
-+
-+# AC_PROG_NM
-+# ----------
-+# find the path to a BSD-compatible name lister
-+AC_DEFUN([AC_PROG_NM],
-+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-+[if test -n "$NM"; then
-+ # Let the user override the test.
-+ lt_cv_path_NM="$NM"
-+else
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+ # Check to see if the nm accepts a BSD-compat flag.
-+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+ # nm: unknown option "B" ignored
-+ # Tru64's nm complains that /dev/null is an invalid object file
-+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+ */dev/null* | *'Invalid file or object type'*)
-+ lt_cv_path_NM="$tmp_nm -B"
-+ break
-+ ;;
-+ *)
-+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+ */dev/null*)
-+ lt_cv_path_NM="$tmp_nm -p"
-+ break
-+ ;;
-+ *)
-+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+ continue # so that we can try to find one that supports BSD flags
-+ ;;
-+ esac
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi])
-+NM="$lt_cv_path_NM"
-+])# AC_PROG_NM
-+
-+
-+# AC_CHECK_LIBM
-+# -------------
-+# check for math library
-+AC_DEFUN([AC_CHECK_LIBM],
-+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+LIBM=
-+case $host in
-+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-+ # These system don't have libm, or don't need it
-+ ;;
-+*-ncr-sysv4.3*)
-+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-+ ;;
-+*)
-+ AC_CHECK_LIB(m, cos, LIBM="-lm")
-+ ;;
-+esac
-+])# AC_CHECK_LIBM
-+
-+
-+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-+# -----------------------------------
-+# sets LIBLTDL to the link flags for the libltdl convenience library and
-+# LTDLINCL to the include flags for the libltdl header and adds
-+# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
-+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
-+# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
-+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-+# '${top_srcdir}/' (note the single quotes!). If your package is not
-+# flat and you're not using automake, define top_builddir and
-+# top_srcdir appropriately in the Makefiles.
-+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+ case $enable_ltdl_convenience in
-+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-+ "") enable_ltdl_convenience=yes
-+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-+ esac
-+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
-+])# AC_LIBLTDL_CONVENIENCE
-+
-+
-+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-+# -----------------------------------
-+# sets LIBLTDL to the link flags for the libltdl installable library and
-+# LTDLINCL to the include flags for the libltdl header and adds
-+# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
-+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
-+# DIRECTORY is not provided and an installed libltdl is not found, it is
-+# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
-+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-+# quotes!). If your package is not flat and you're not using automake,
-+# define top_builddir and top_srcdir appropriately in the Makefiles.
-+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+ AC_CHECK_LIB(ltdl, lt_dlinit,
-+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-+ [if test x"$enable_ltdl_install" = xno; then
-+ AC_MSG_WARN([libltdl not installed, but installation disabled])
-+ else
-+ enable_ltdl_install=yes
-+ fi
-+ ])
-+ if test x"$enable_ltdl_install" = x"yes"; then
-+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
-+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ else
-+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-+ LIBLTDL="-lltdl"
-+ LTDLINCL=
-+ fi
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
-+])# AC_LIBLTDL_INSTALLABLE
-+
-+
-+# AC_LIBTOOL_CXX
-+# --------------
-+# enable support for C++ libraries
-+AC_DEFUN([AC_LIBTOOL_CXX],
-+[AC_REQUIRE([_LT_AC_LANG_CXX])
-+])# AC_LIBTOOL_CXX
-+
-+
-+# _LT_AC_LANG_CXX
-+# ---------------
-+AC_DEFUN([_LT_AC_LANG_CXX],
-+[AC_REQUIRE([AC_PROG_CXX])
-+AC_REQUIRE([AC_PROG_CXXCPP])
-+_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
-+])# _LT_AC_LANG_CXX
-+
-+
-+# AC_LIBTOOL_F77
-+# --------------
-+# enable support for Fortran 77 libraries
-+AC_DEFUN([AC_LIBTOOL_F77],
-+[AC_REQUIRE([_LT_AC_LANG_F77])
-+])# AC_LIBTOOL_F77
-+
-+
-+# _LT_AC_LANG_F77
-+# ---------------
-+AC_DEFUN([_LT_AC_LANG_F77],
-+[AC_REQUIRE([AC_PROG_F77])
-+_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
-+])# _LT_AC_LANG_F77
-+
-+
-+# AC_LIBTOOL_GCJ
-+# --------------
-+# enable support for GCJ libraries
-+AC_DEFUN([AC_LIBTOOL_GCJ],
-+[AC_REQUIRE([_LT_AC_LANG_GCJ])
-+])# AC_LIBTOOL_GCJ
-+
-+
-+# _LT_AC_LANG_GCJ
-+# ---------------
-+AC_DEFUN([_LT_AC_LANG_GCJ],
-+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-+_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
-+])# _LT_AC_LANG_GCJ
-+
-+
-+# AC_LIBTOOL_RC
-+# --------------
-+# enable support for Windows resource files
-+AC_DEFUN([AC_LIBTOOL_RC],
-+[AC_REQUIRE([LT_AC_PROG_RC])
-+_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
-+])# AC_LIBTOOL_RC
-+
-+
-+# AC_LIBTOOL_LANG_C_CONFIG
-+# ------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-+[lt_save_CC="$CC"
-+AC_LANG_PUSH(C)
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}\n'
-+
-+_LT_AC_SYS_COMPILER
-+
-+#
-+# Check for any special shared library compilation flags.
-+#
-+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-+if test "$GCC" = no; then
-+ case $host_os in
-+ sco3.2v5*)
-+ _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-+ ;;
-+ esac
-+fi
-+if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-+ AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-+ if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-+ else
-+ AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-+ _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-+ fi
-+fi
-+
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-+ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-+ $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-+ [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-+
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+AC_LIBTOOL_SYS_LIB_STRIP
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_DLOPEN_SELF($1)
-+
-+# Report which librarie types wil actually be built
-+AC_MSG_CHECKING([if libtool supports shared libraries])
-+AC_MSG_RESULT([$can_build_shared])
-+
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case "$host_os" in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix4*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+ darwin* | rhapsody*)
-+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ case "$host_os" in
-+ rhapsody* | darwin1.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-+ ;;
-+ esac
-+ # FIXME: Relying on posixy $() will cause problems for
-+ # cross-compilation, but unfortunately the echo tests do not
-+ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-+ # `"' quotes if we put them in here... so don't!
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ fi
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_C_CONFIG
-+
-+
-+# AC_LIBTOOL_LANG_CXX_CONFIG
-+# --------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-+[AC_LANG_PUSH(C++)
-+AC_REQUIRE([AC_PROG_CXX])
-+AC_REQUIRE([AC_PROG_CXXCPP])
-+
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+_LT_AC_TAGVAR(always_export_symbols, $1)=no
-+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_direct, $1)=no
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+_LT_AC_TAGVAR(module_cmds, $1)=
-+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+_LT_AC_TAGVAR(no_undefined_flag, $1)=
-+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+
-+# Dependencies to place before and after the object being linked:
-+_LT_AC_TAGVAR(predep_objects, $1)=
-+_LT_AC_TAGVAR(postdep_objects, $1)=
-+_LT_AC_TAGVAR(predeps, $1)=
-+_LT_AC_TAGVAR(postdeps, $1)=
-+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cc
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+ unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+ lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+ unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-+else
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-+fi
-+
-+if test "$GXX" = yes; then
-+ # Set up default GNU C++ configuration
-+
-+ AC_PROG_LD
-+
-+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+ # archiving commands below assume that GNU ld is being used.
-+ if test "$with_gnu_ld" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+ # investigate it a little bit more. (MM)
-+ wlarc='${wl}'
-+
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+ grep 'no-whole-archive' > /dev/null; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ else
-+ with_gnu_ld=no
-+ wlarc=
-+
-+ # A generic and very simple default shared library creation
-+ # command for GNU C++ for the case where it uses the native
-+ # linker, instead of GNU ld. If possible, this setting should
-+ # overridden to take advantage of the native linker features on
-+ # the platform it is being used on.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ fi
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+ GXX=no
-+ with_gnu_ld=no
-+ wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+case $host_os in
-+ aix3*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ _LT_AC_TAGVAR(archive_cmds, $1)=''
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GXX" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ else
-+ # We have old collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ fi
-+ esac
-+ shared_flag='-shared'
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-+ # -bexpall does not export symbols beginning with underscore (_)
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ # Exported symbols can be pulled into shared objects from archives
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ # This is similar to how AIX traditionally builds it's shared libraries.
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ case "$host_os" in
-+ rhapsody* | darwin1.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-+ ;;
-+ esac
-+ lt_int_apple_cc_single_mod=no
-+ output_verbose_link_cmd='echo'
-+ if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-+ lt_int_apple_cc_single_mod=yes
-+ fi
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ fi
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-+
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ fi
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ fi
-+ ;;
-+
-+ dgux*)
-+ case $cc_basename in
-+ ec++)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ ghcx)
-+ # Green Hills C++ Compiler
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ freebsd[12]*)
-+ # C++ shared libraries reported to be fairly broken before switch to ELF
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ freebsd-elf*)
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ ;;
-+ freebsd*)
-+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+ # conventions
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+
-+ case $cc_basename in
-+ CC)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aCC)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ hpux10*|hpux11*)
-+ if test $with_gnu_ld = no; then
-+ case "$host_cpu" in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ ;;
-+ esac
-+ fi
-+ case "$host_cpu" in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ esac
-+
-+ case $cc_basename in
-+ CC)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aCC)
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test $with_gnu_ld = no; then
-+ case "$host_cpu" in
-+ ia64*|hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ irix5* | irix6*)
-+ case $cc_basename in
-+ CC)
-+ # SGI C++
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+ fi
-+ fi
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+ linux*)
-+ case $cc_basename in
-+ KCC)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-+ ;;
-+ icpc)
-+ # Intel C++
-+ with_gnu_ld=yes
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+ ;;
-+ cxx)
-+ # Compaq C++
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+ runpath_var=LD_RUN_PATH
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ m88k*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ netbsd*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+ wlarc=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ fi
-+ # Workaround some broken pre-1.5 toolchains
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+ ;;
-+ osf3*)
-+ case $cc_basename in
-+ KCC)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+ ;;
-+ RCC)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ cxx)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ osf4* | osf5*)
-+ case $cc_basename in
-+ KCC)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Archives containing C++ object files must be created using
-+ # the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-+ ;;
-+ RCC)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ cxx)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+ echo "-hidden">> $lib.exp~
-+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-+ $rm $lib.exp'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ sco*)
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ case $cc_basename in
-+ CC)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC)
-+ # Sun C++ 4.x
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ lcc)
-+ # Lucid
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The C++ compiler is used as linker so we must use $wl
-+ # flag to pass the commands to the underlying system
-+ # linker.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ gcx)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+ # The C++ compiler must be used to create the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ # GNU C++ compiler with Solaris linker
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-+ if $CC --version | grep -v '^2\.7' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ else
-+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+ # platform.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ fi
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC)
-+ # NonStop-UX NCC 3.20
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-+
-+_LT_AC_TAGVAR(GCC, $1)="$GXX"
-+_LT_AC_TAGVAR(LD, $1)="$LD"
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+AC_LIBTOOL_POSTDEP_PREDEP($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+AC_LIBTOOL_SYS_LIB_STRIP
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_DLOPEN_SELF($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+])# AC_LIBTOOL_LANG_CXX_CONFIG
-+
-+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-+# ------------------------
-+# Figure out "hidden" library dependencies from verbose
-+# compiler output when linking a shared library.
-+# Parse the compiler output and extract the necessary
-+# objects, libraries and library flags.
-+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-+dnl we can't use the lt_simple_compile_test_code here,
-+dnl because it contains code intended for an executable,
-+dnl not a library. It's possible we should let each
-+dnl tag define a new lt_????_link_test_code variable,
-+dnl but it's only used here...
-+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-+int a;
-+void foo (void) { a = 0; }
-+EOF
-+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+ Foo (void) { a = 0; }
-+private:
-+ int a;
-+};
-+EOF
-+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-+ subroutine foo
-+ implicit none
-+ integer*4 a
-+ a=0
-+ return
-+ end
-+EOF
-+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-+public class foo {
-+ private int a;
-+ public void bar (void) {
-+ a = 0;
-+ }
-+};
-+EOF
-+])
-+dnl Parse the compiler output and extract the necessary
-+dnl objects, libraries and library flags.
-+if AC_TRY_EVAL(ac_compile); then
-+ # Parse the compiler output and extract the necessary
-+ # objects, libraries and library flags.
-+
-+ # Sentinel used to keep track of whether or not we are before
-+ # the conftest object file.
-+ pre_test_object_deps_done=no
-+
-+ # The `*' in the case matches for architectures that use `case' in
-+ # $output_verbose_cmd can trigger glob expansion during the loop
-+ # eval without this substitution.
-+ output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
-+
-+ for p in `eval $output_verbose_link_cmd`; do
-+ case $p in
-+
-+ -L* | -R* | -l*)
-+ # Some compilers place space between "-{L,R}" and the path.
-+ # Remove the space.
-+ if test $p = "-L" \
-+ || test $p = "-R"; then
-+ prev=$p
-+ continue
-+ else
-+ prev=
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ case $p in
-+ -L* | -R*)
-+ # Internal compiler library paths should come after those
-+ # provided the user. The postdeps already come after the
-+ # user supplied libs so there is no need to process them.
-+ if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-+ else
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-+ fi
-+ ;;
-+ # The "-l" case would never come before the object being
-+ # linked, so don't bother handling this case.
-+ esac
-+ else
-+ if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-+ _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-+ else
-+ _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$objext)
-+ # This assumes that the test object file only shows up
-+ # once in the compiler output.
-+ if test "$p" = "conftest.$objext"; then
-+ pre_test_object_deps_done=yes
-+ continue
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-+ _LT_AC_TAGVAR(predep_objects, $1)="$p"
-+ else
-+ _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-+ fi
-+ else
-+ if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-+ _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-+ else
-+ _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-+ fi
-+ fi
-+ ;;
-+
-+ *) ;; # Ignore the rest.
-+
-+ esac
-+ done
-+
-+ # Clean up.
-+ rm -f a.out a.exe
-+else
-+ echo "libtool.m4: error: problem compiling $1 test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+case " $_LT_AC_TAGVAR(postdeps, $1) " in
-+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-+esac
-+])# AC_LIBTOOL_POSTDEP_PREDEP
-+
-+# AC_LIBTOOL_LANG_F77_CONFIG
-+# ------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-+[AC_REQUIRE([AC_PROG_F77])
-+AC_LANG_PUSH(Fortran 77)
-+
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+_LT_AC_TAGVAR(always_export_symbols, $1)=no
-+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_direct, $1)=no
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+_LT_AC_TAGVAR(module_cmds, $1)=
-+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+_LT_AC_TAGVAR(no_undefined_flag, $1)=
-+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code=" program t\n end\n"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-+
-+AC_MSG_CHECKING([if libtool supports shared libraries])
-+AC_MSG_RESULT([$can_build_shared])
-+
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case "$host_os" in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+aix4*)
-+ test "$enable_shared" = yes && enable_static=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-+
-+_LT_AC_TAGVAR(GCC, $1)="$G77"
-+_LT_AC_TAGVAR(LD, $1)="$LD"
-+
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+AC_LIBTOOL_SYS_LIB_STRIP
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_F77_CONFIG
-+
-+
-+# AC_LIBTOOL_LANG_GCJ_CONFIG
-+# --------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-+[AC_LANG_SAVE
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+
-+## CAVEAT EMPTOR:
-+## There is no encapsulation within the following macros, do not change
-+## the running order or otherwise move them around unless you know exactly
-+## what you are doing...
-+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+AC_LIBTOOL_SYS_LIB_STRIP
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_DLOPEN_SELF($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_RESTORE
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_GCJ_CONFIG
-+
-+
-+# AC_LIBTOOL_LANG_RC_CONFIG
-+# --------------------------
-+# Ensure that the configuration vars for the Windows resource compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-+[AC_LANG_SAVE
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_RESTORE
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_RC_CONFIG
-+
-+
-+# AC_LIBTOOL_CONFIG([TAGNAME])
-+# ----------------------------
-+# If TAGNAME is not passed, then create an initial libtool script
-+# with a default configuration from the untagged config vars. Otherwise
-+# add code to config.status for appending the configuration named by
-+# TAGNAME from the matching tagged config vars.
-+AC_DEFUN([AC_LIBTOOL_CONFIG],
-+[# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ _LT_AC_TAGVAR(compiler, $1) \
-+ _LT_AC_TAGVAR(CC, $1) \
-+ _LT_AC_TAGVAR(LD, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-+ _LT_AC_TAGVAR(old_archive_cmds, $1) \
-+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-+ _LT_AC_TAGVAR(predep_objects, $1) \
-+ _LT_AC_TAGVAR(postdep_objects, $1) \
-+ _LT_AC_TAGVAR(predeps, $1) \
-+ _LT_AC_TAGVAR(postdeps, $1) \
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-+ _LT_AC_TAGVAR(archive_cmds, $1) \
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-+ _LT_AC_TAGVAR(postinstall_cmds, $1) \
-+ _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-+ _LT_AC_TAGVAR(no_undefined_flag, $1) \
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-+ _LT_AC_TAGVAR(hardcode_automatic, $1) \
-+ _LT_AC_TAGVAR(module_cmds, $1) \
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-+ _LT_AC_TAGVAR(exclude_expsyms, $1) \
-+ _LT_AC_TAGVAR(include_expsyms, $1); do
-+
-+ case $var in
-+ _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-+ _LT_AC_TAGVAR(archive_cmds, $1) | \
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-+ _LT_AC_TAGVAR(module_cmds, $1) | \
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\[$]0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+ifelse([$1], [],
-+ [cfgfile="${ofile}T"
-+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+ $rm -f "$cfgfile"
-+ AC_MSG_NOTICE([creating $ofile])],
-+ [cfgfile="$ofile"])
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+ifelse([$1], [],
-+[#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG],
-+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# A language-specific compiler.
-+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext='$shrext'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-+
-+# Must we lock files when doing compilation ?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-+
-+ifelse([$1],[],
-+[# ### END LIBTOOL CONFIG],
-+[# ### END LIBTOOL TAG CONFIG: $tagname])
-+
-+__EOF__
-+
-+ifelse([$1],[], [
-+ case $host_os in
-+ aix3*)
-+ cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program. For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+fi
-+EOF
-+ ;;
-+ esac
-+
-+ # We use sed instead of cat because bash on DJGPP gets confused if
-+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
-+ # text mode, it properly converts lines to CR/LF. This bash problem
-+ # is reportedly fixed, but why not run on old versions too?
-+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+ mv -f "$cfgfile" "$ofile" || \
-+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+ chmod +x "$ofile"
-+])
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ test -f Makefile && make "$ltmain"
-+fi
-+])# AC_LIBTOOL_CONFIG
-+
-+
-+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-+# -------------------------------------------
-+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+
-+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-+
-+if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-+
-+ AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-+ lt_cv_prog_compiler_rtti_exceptions,
-+ [-fno-rtti -fno-exceptions], [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-+fi
-+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-+
-+
-+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+# ---------------------------------
-+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-+[AC_REQUIRE([AC_CANONICAL_HOST])
-+AC_REQUIRE([AC_PROG_NM])
-+AC_REQUIRE([AC_OBJEXT])
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-+[
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[[BCDEGRST]]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-+
-+# Transform the above into a raw symbol and a C symbol.
-+symxfrm='\1 \2\3 \3'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+ symcode='[[BCDT]]'
-+ ;;
-+cygwin* | mingw* | pw32*)
-+ symcode='[[ABCDGISTW]]'
-+ ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+ if test "$host_cpu" = ia64; then
-+ symcode='[[ABCDEGRST]]'
-+ fi
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[[BCDEGRST]]'
-+ ;;
-+osf*)
-+ symcode='[[BCDEGQRST]]'
-+ ;;
-+solaris* | sysv5*)
-+ symcode='[[BDT]]'
-+ ;;
-+sysv4)
-+ symcode='[[DFNSTU]]'
-+ ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+ ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+ symcode='[[ABCDGISTW]]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+ # Write the raw and C identifiers.
-+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-+
-+ # Check to see that the pipe works correctly.
-+ pipe_works=no
-+
-+ rm -f conftest*
-+ cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+ if AC_TRY_EVAL(ac_compile); then
-+ # Now try to grab the symbols.
-+ nlist=conftest.nm
-+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-+ # Try sorting and uniquifying the output.
-+ if sort "$nlist" | uniq > "$nlist"T; then
-+ mv -f "$nlist"T "$nlist"
-+ else
-+ rm -f "$nlist"T
-+ fi
-+
-+ # Make sure that we snagged all the symbols we need.
-+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+ cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+ # Now generate the symbol file.
-+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+ cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+ const char *name;
-+ lt_ptr_t address;
-+}
-+lt_preloaded_symbols[[]] =
-+{
-+EOF
-+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+ cat <<\EOF >> conftest.$ac_ext
-+ {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+ # Now try linking the two files.
-+ mv conftest.$ac_objext conftstm.$ac_objext
-+ lt_save_LIBS="$LIBS"
-+ lt_save_CFLAGS="$CFLAGS"
-+ LIBS="conftstm.$ac_objext"
-+ CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-+ pipe_works=yes
-+ fi
-+ LIBS="$lt_save_LIBS"
-+ CFLAGS="$lt_save_CFLAGS"
-+ else
-+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-+ cat conftest.$ac_ext >&5
-+ fi
-+ rm -f conftest* conftst*
-+
-+ # Do not use the global_symbol_pipe unless it works.
-+ if test "$pipe_works" = yes; then
-+ break
-+ else
-+ lt_cv_sys_global_symbol_pipe=
-+ fi
-+done
-+])
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+ lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+ AC_MSG_RESULT(failed)
-+else
-+ AC_MSG_RESULT(ok)
-+fi
-+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+
-+
-+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-+# ---------------------------------------
-+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-+
-+AC_MSG_CHECKING([for $compiler option to produce PIC])
-+ ifelse([$1],[CXX],[
-+ # C++ specific cases for pic, static, wl, etc.
-+ if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+ mingw* | os2* | pw32*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-+ ;;
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-+ ;;
-+ *djgpp*)
-+ # DJGPP does not support shared libraries at all
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-+ fi
-+ ;;
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ else
-+ case $host_os in
-+ aix4* | aix5*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ else
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ cxch68)
-+ # Green Hills C++ Compiler
-+ # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+ ;;
-+ esac
-+ ;;
-+ dgux*)
-+ case $cc_basename in
-+ ec++)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ ;;
-+ ghcx)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ freebsd*)
-+ # FreeBSD uses GNU C++
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $cc_basename in
-+ CC)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-+ if test "$host_cpu" != ia64; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ fi
-+ ;;
-+ aCC)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case $cc_basename in
-+ CC)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ # CC pic flag -KPIC is the default.
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ linux*)
-+ case $cc_basename in
-+ KCC)
-+ # KAI C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ icpc)
-+ # Intel C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+ ;;
-+ cxx)
-+ # Compaq C++
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ ;;
-+ m88k*)
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ netbsd*)
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ case $cc_basename in
-+ KCC)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-+ ;;
-+ RCC)
-+ # Rational C++ 2.4.1
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ cxx)
-+ # Digital/Compaq C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ ;;
-+ sco*)
-+ case $cc_basename in
-+ CC)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ ;;
-+ gcx)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC)
-+ # Sun C++ 4.x
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ lcc)
-+ # Lucid
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC)
-+ # NonStop-UX NCC 3.20
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ unixware*)
-+ ;;
-+ vxworks*)
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+ esac
-+ fi
-+],
-+[
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ else
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ linux*)
-+ case $CC in
-+ icc|ecc)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+ ;;
-+ ccc)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # All Alpha code is PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # All OSF/1 code is PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ sco3.2v5*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-+ ;;
-+
-+ solaris*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sunos4*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+ esac
-+ fi
-+])
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-+ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-+ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-+ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-+ esac],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-+fi
-+case "$host_os" in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-+ ;;
-+esac
-+])
-+
-+
-+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-+# ------------------------------------
-+# See if the linker supports building shared libraries.
-+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-+ifelse([$1],[CXX],[
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ case $host_os in
-+ aix4* | aix5*)
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ ;;
-+ pw32*)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-+ ;;
-+ cygwin* | mingw*)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ esac
-+],[
-+ runpath_var=
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+ _LT_AC_TAGVAR(archive_cmds, $1)=
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+ _LT_AC_TAGVAR(module_cmds, $1)=
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ _LT_AC_TAGVAR(include_expsyms, $1)=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ extract_expsyms_cmds=
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix3* | aix4* | aix5*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ netbsd*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris* | sysv5*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ sunos4*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-+ runpath_var=LD_RUN_PATH
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ if test "$GCC" = yes && test -z "$link_static_flag"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ fi
-+ ;;
-+
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ _LT_AC_TAGVAR(archive_cmds, $1)=''
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ else
-+ # We have old collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ fi
-+ esac
-+ shared_flag='-shared'
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-+ # -bexpall does not export symbols beginning with underscore (_)
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ # Exported symbols can be pulled into shared objects from archives
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ # This is similar to how AIX traditionally builds it's shared libraries.
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ # see comment about different semantics on the GNU ld section
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ bsdi4*)
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-+ # FIXME: Should let the user specify the lib program.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path='`cygpath -w "$srcfile"`'
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ case "$host_os" in
-+ rhapsody* | darwin1.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-+ ;;
-+ esac
-+ # FIXME: Relying on posixy $() will cause problems for
-+ # cross-compilation, but unfortunately the echo tests do not
-+ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-+ # `"' quotes if we put them in here... so don't!
-+ lt_int_apple_cc_single_mod=no
-+ output_verbose_link_cmd='echo'
-+ if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-+ lt_int_apple_cc_single_mod=yes
-+ fi
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ fi
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ fi
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ fi
-+ ;;
-+
-+ dgux*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ freebsd1*)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ ;;
-+
-+ hpux10* | hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case "$host_cpu" in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ case "$host_cpu" in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+
-+ netbsd*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ newsos6)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ openbsd*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ os2*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ else
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+
-+ sco3.2v5*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ;;
-+
-+ solaris*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ case $host_os in
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-+ esac
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ ;;
-+ motorola)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ sysv4.3*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ fi
-+ ;;
-+
-+ sysv4.2uw2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ hardcode_runpath_var=yes
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+
-+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ runpath_var='LD_RUN_PATH'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ sysv5*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-+ # $CC -shared without GNU ld will not create a library from C++
-+ # object files and a static libstdc++, better avoid it by now
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var='LD_RUN_PATH'
-+ ;;
-+
-+ uts4*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+])
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-+x|xyes)
-+ # Assume -lc should be added
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $_LT_AC_TAGVAR(archive_cmds, $1) in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-+ $rm conftest*
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-+ then
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ else
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ fi
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+])# AC_LIBTOOL_PROG_LD_SHLIBS
-+
-+
-+# _LT_AC_FILE_LTDLL_C
-+# -------------------
-+# Be careful that the start marker always follows a newline.
-+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-+# /* ltdll.c starts here */
-+# #define WIN32_LEAN_AND_MEAN
-+# #include <windows.h>
-+# #undef WIN32_LEAN_AND_MEAN
-+# #include <stdio.h>
-+#
-+# #ifndef __CYGWIN__
-+# # ifdef __CYGWIN32__
-+# # define __CYGWIN__ __CYGWIN32__
-+# # endif
-+# #endif
-+#
-+# #ifdef __cplusplus
-+# extern "C" {
-+# #endif
-+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-+# #ifdef __cplusplus
-+# }
-+# #endif
-+#
-+# #ifdef __CYGWIN__
-+# #include <cygwin/cygwin_dll.h>
-+# DECLARE_CYGWIN_DLL( DllMain );
-+# #endif
-+# HINSTANCE __hDllInstance_base;
-+#
-+# BOOL APIENTRY
-+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-+# {
-+# __hDllInstance_base = hInst;
-+# return TRUE;
-+# }
-+# /* ltdll.c ends here */
-+])# _LT_AC_FILE_LTDLL_C
-+
-+
-+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-+# ---------------------------------
-+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-+
-+
-+# old names
-+AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-+AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-+AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-+AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-+AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-+
-+# This is just to silence aclocal about the macro not being used
-+ifelse([AC_DISABLE_FAST_INSTALL])
-+
-+AC_DEFUN([LT_AC_PROG_GCJ],
-+[AC_CHECK_TOOL(GCJ, gcj, no)
-+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-+ AC_SUBST(GCJFLAGS)
-+])
-+
-+AC_DEFUN([LT_AC_PROG_RC],
-+[AC_CHECK_TOOL(RC, windres, no)
-+])
-+
-+############################################################
-+# NOTE: This macro has been submitted for inclusion into #
-+# GNU Autoconf as AC_PROG_SED. When it is available in #
-+# a released version of Autoconf we should remove this #
-+# macro and use it instead. #
-+############################################################
-+# LT_AC_PROG_SED
-+# --------------
-+# Check for a fully-functional sed program, that truncates
-+# as few characters as possible. Prefer GNU sed if found.
-+AC_DEFUN([LT_AC_PROG_SED],
-+[AC_MSG_CHECKING([for a sed that does not truncate output])
-+AC_CACHE_VAL(lt_cv_path_SED,
-+[# Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for lt_ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f $lt_ac_sed && break
-+ cat /dev/null > conftest.in
-+ lt_ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+ # Check for GNU sed and select it if it is found.
-+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+ lt_cv_path_SED=$lt_ac_sed
-+ break
-+ fi
-+ while true; do
-+ cat conftest.in conftest.in >conftest.tmp
-+ mv conftest.tmp conftest.in
-+ cp conftest.in conftest.nl
-+ echo >>conftest.nl
-+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+ cmp -s conftest.out conftest.nl || break
-+ # 10000 chars as input seems more than enough
-+ test $lt_ac_count -gt 10 && break
-+ lt_ac_count=`expr $lt_ac_count + 1`
-+ if test $lt_ac_count -gt $lt_ac_max; then
-+ lt_ac_max=$lt_ac_count
-+ lt_cv_path_SED=$lt_ac_sed
-+ fi
-+ done
-+done
-+SED=$lt_cv_path_SED
-+])
-+AC_MSG_RESULT([$SED])
-+])
-diff -urNd -urNd libtool-1.5/m4/ltdl.m4 libtool-1.5.m4/m4/ltdl.m4
---- libtool-1.5/m4/ltdl.m4 1969-12-31 19:00:00.000000000 -0500
-+++ libtool-1.5.m4/m4/ltdl.m4 2004-05-04 17:59:48.000000000 -0400
-@@ -0,0 +1,432 @@
-+## ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
-+## Copyright (C) 1999-2000 Free Software Foundation, Inc.
-+##
-+## This program is free software; you can redistribute it and/or modify
-+## it under the terms of the GNU General Public License as published by
-+## the Free Software Foundation; either version 2 of the License, or
-+## (at your option) any later version.
-+##
-+## This program is distributed in the hope that it will be useful, but
-+## WITHOUT ANY WARRANTY; without even the implied warranty of
-+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+## General Public License for more details.
-+##
-+## You should have received a copy of the GNU General Public License
-+## along with this program; if not, write to the Free Software
-+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+##
-+## As a special exception to the GNU General Public License, if you
-+## distribute this file as part of a program that contains a
-+## configuration script generated by Autoconf, you may include it under
-+## the same distribution terms that you use for the rest of that program.
-+
-+# serial 6 AC_LIB_LTDL
-+
-+# AC_WITH_LTDL
-+# ------------
-+# Clients of libltdl can use this macro to allow the installer to
-+# choose between a shipped copy of the ltdl sources or a preinstalled
-+# version of the library.
-+AC_DEFUN([AC_WITH_LTDL],
-+[AC_REQUIRE([AC_LIB_LTDL])
-+AC_SUBST([LIBLTDL])
-+AC_SUBST([INCLTDL])
-+
-+# Unless the user asks us to check, assume no installed ltdl exists.
-+use_installed_libltdl=no
-+
-+AC_ARG_WITH([included_ltdl],
-+ [ --with-included-ltdl use the GNU ltdl sources included here])
-+
-+if test "x$with_included_ltdl" != xyes; then
-+ # We are not being forced to use the included libltdl sources, so
-+ # decide whether there is a useful installed version we can use.
-+ AC_CHECK_HEADER([ltdl.h],
-+ [AC_CHECK_LIB([ltdl], [lt_dlcaller_register],
-+ [with_included_ltdl=no],
-+ [with_included_ltdl=yes])
-+ ])
-+fi
-+
-+if test "x$enable_ltdl_install" != xyes; then
-+ # If the user did not specify an installable libltdl, then default
-+ # to a convenience lib.
-+ AC_LIBLTDL_CONVENIENCE
-+fi
-+
-+if test "x$with_included_ltdl" = xno; then
-+ # If the included ltdl is not to be used. then Use the
-+ # preinstalled libltdl we found.
-+ AC_DEFINE([HAVE_LTDL], 1,
-+ [Define this if a modern libltdl is already installed])
-+ LIBLTDL=-lltdl
-+fi
-+
-+# Report our decision...
-+AC_MSG_CHECKING([whether to use included libltdl])
-+AC_MSG_RESULT([$with_included_ltdl])
-+
-+AC_CONFIG_SUBDIRS([libltdl])
-+])# AC_WITH_LTDL
-+
-+
-+# AC_LIB_LTDL
-+# -----------
-+# Perform all the checks necessary for compilation of the ltdl objects
-+# -- including compiler checks and header checks.
-+AC_DEFUN([AC_LIB_LTDL],
-+[AC_PREREQ(2.50)
-+AC_REQUIRE([AC_PROG_CC])
-+AC_REQUIRE([AC_C_CONST])
-+AC_REQUIRE([AC_HEADER_STDC])
-+AC_REQUIRE([AC_HEADER_DIRENT])
-+AC_REQUIRE([_LT_AC_CHECK_DLFCN])
-+AC_REQUIRE([AC_LTDL_ENABLE_INSTALL])
-+AC_REQUIRE([AC_LTDL_SHLIBEXT])
-+AC_REQUIRE([AC_LTDL_SHLIBPATH])
-+AC_REQUIRE([AC_LTDL_SYSSEARCHPATH])
-+AC_REQUIRE([AC_LTDL_OBJDIR])
-+AC_REQUIRE([AC_LTDL_DLPREOPEN])
-+AC_REQUIRE([AC_LTDL_DLLIB])
-+AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])
-+AC_REQUIRE([AC_LTDL_DLSYM_USCORE])
-+AC_REQUIRE([AC_LTDL_SYS_DLOPEN_DEPLIBS])
-+AC_REQUIRE([AC_LTDL_FUNC_ARGZ])
-+
-+AC_CHECK_HEADERS([assert.h ctype.h errno.h malloc.h memory.h stdlib.h \
-+ stdio.h unistd.h])
-+AC_CHECK_HEADERS([dl.h sys/dl.h dld.h mach-o/dyld.h])
-+AC_CHECK_HEADERS([string.h strings.h], [break])
-+
-+AC_CHECK_FUNCS([strchr index], [break])
-+AC_CHECK_FUNCS([strrchr rindex], [break])
-+AC_CHECK_FUNCS([memcpy bcopy], [break])
-+AC_CHECK_FUNCS([memmove strcmp])
-+AC_CHECK_FUNCS([closedir opendir readdir])
-+])# AC_LIB_LTDL
-+
-+
-+# AC_LTDL_ENABLE_INSTALL
-+# ----------------------
-+AC_DEFUN([AC_LTDL_ENABLE_INSTALL],
-+[AC_ARG_ENABLE([ltdl-install],
-+ [AC_HELP_STRING([--enable-ltdl-install], [install libltdl])])
-+
-+AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
-+AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)
-+])])# AC_LTDL_ENABLE_INSTALL
-+
-+
-+# AC_LTDL_SYS_DLOPEN_DEPLIBS
-+# --------------------------
-+AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS],
-+[AC_REQUIRE([AC_CANONICAL_HOST])
-+AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
-+ [libltdl_cv_sys_dlopen_deplibs],
-+ [# PORTME does your system automatically load deplibs for dlopen?
-+ # or its logical equivalent (e.g. shl_load for HP-UX < 11)
-+ # For now, we just catch OSes we know something about -- in the
-+ # future, we'll try test this programmatically.
-+ libltdl_cv_sys_dlopen_deplibs=unknown
-+ case "$host_os" in
-+ aix3*|aix4.1.*|aix4.2.*)
-+ # Unknown whether this is true for these versions of AIX, but
-+ # we want this `case' here to explicitly catch those versions.
-+ libltdl_cv_sys_dlopen_deplibs=unknown
-+ ;;
-+ aix[[45]]*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ darwin*)
-+ # Assuming the user has installed a libdl from somewhere, this is true
-+ # If you are looking for one http://www.opendarwin.org/projects/dlcompat
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ gnu*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ hpux10*|hpux11*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ irix[[12345]]*|irix6.[[01]]*)
-+ # Catch all versions of IRIX before 6.2, and indicate that we don't
-+ # know how it worked for any of those versions.
-+ libltdl_cv_sys_dlopen_deplibs=unknown
-+ ;;
-+ irix*)
-+ # The case above catches anything before 6.2, and it's known that
-+ # at 6.2 and later dlopen does load deplibs.
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ linux*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ netbsd*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ openbsd*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ osf[[1234]]*)
-+ # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
-+ # it did *not* use an RPATH in a shared library to find objects the
-+ # library depends on, so we explictly say `no'.
-+ libltdl_cv_sys_dlopen_deplibs=no
-+ ;;
-+ osf5.0|osf5.0a|osf5.1)
-+ # dlopen *does* load deplibs and with the right loader patch applied
-+ # it even uses RPATH in a shared library to search for shared objects
-+ # that the library depends on, but there's no easy way to know if that
-+ # patch is installed. Since this is the case, all we can really
-+ # say is unknown -- it depends on the patch being installed. If
-+ # it is, this changes to `yes'. Without it, it would be `no'.
-+ libltdl_cv_sys_dlopen_deplibs=unknown
-+ ;;
-+ osf*)
-+ # the two cases above should catch all versions of osf <= 5.1. Read
-+ # the comments above for what we know about them.
-+ # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
-+ # is used to find them so we can finally say `yes'.
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ solaris*)
-+ libltdl_cv_sys_dlopen_deplibs=yes
-+ ;;
-+ esac
-+ ])
-+if test "$libltdl_cv_sys_dlopen_deplibs" != yes; then
-+ AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1],
-+ [Define if the OS needs help to load dependent libraries for dlopen().])
-+fi
-+])# AC_LTDL_SYS_DLOPEN_DEPLIBS
-+
-+
-+# AC_LTDL_SHLIBEXT
-+# ----------------
-+AC_DEFUN([AC_LTDL_SHLIBEXT],
-+[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
-+AC_CACHE_CHECK([which extension is used for loadable modules],
-+ [libltdl_cv_shlibext],
-+[
-+module=yes
-+eval libltdl_cv_shlibext=$shrext
-+ ])
-+if test -n "$libltdl_cv_shlibext"; then
-+ AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext",
-+ [Define to the extension used for shared libraries, say, ".so".])
-+fi
-+])# AC_LTDL_SHLIBEXT
-+
-+
-+# AC_LTDL_SHLIBPATH
-+# -----------------
-+AC_DEFUN([AC_LTDL_SHLIBPATH],
-+[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
-+AC_CACHE_CHECK([which variable specifies run-time library path],
-+ [libltdl_cv_shlibpath_var], [libltdl_cv_shlibpath_var="$shlibpath_var"])
-+if test -n "$libltdl_cv_shlibpath_var"; then
-+ AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var",
-+ [Define to the name of the environment variable that determines the dynamic library search path.])
-+fi
-+])# AC_LTDL_SHLIBPATH
-+
-+
-+# AC_LTDL_SYSSEARCHPATH
-+# ---------------------
-+AC_DEFUN([AC_LTDL_SYSSEARCHPATH],
-+[AC_REQUIRE([AC_LIBTOOL_SYS_DYNAMIC_LINKER])
-+AC_CACHE_CHECK([for the default library search path],
-+ [libltdl_cv_sys_search_path],
-+ [libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"])
-+if test -n "$libltdl_cv_sys_search_path"; then
-+ sys_search_path=
-+ for dir in $libltdl_cv_sys_search_path; do
-+ if test -z "$sys_search_path"; then
-+ sys_search_path="$dir"
-+ else
-+ sys_search_path="$sys_search_path$PATH_SEPARATOR$dir"
-+ fi
-+ done
-+ AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path",
-+ [Define to the system default library search path.])
-+fi
-+])# AC_LTDL_SYSSEARCHPATH
-+
-+
-+# AC_LTDL_OBJDIR
-+# --------------
-+AC_DEFUN([AC_LTDL_OBJDIR],
-+[AC_CACHE_CHECK([for objdir],
-+ [libltdl_cv_objdir],
-+ [libltdl_cv_objdir="$objdir"
-+ if test -n "$objdir"; then
-+ :
-+ else
-+ rm -f .libs 2>/dev/null
-+ mkdir .libs 2>/dev/null
-+ if test -d .libs; then
-+ libltdl_cv_objdir=.libs
-+ else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ libltdl_cv_objdir=_libs
-+ fi
-+ rmdir .libs 2>/dev/null
-+ fi
-+ ])
-+AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/",
-+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
-+])# AC_LTDL_OBJDIR
-+
-+
-+# AC_LTDL_DLPREOPEN
-+# -----------------
-+AC_DEFUN([AC_LTDL_DLPREOPEN],
-+[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
-+AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
-+ [libltdl_cv_preloaded_symbols],
-+ [if test -n "$lt_cv_sys_global_symbol_pipe"; then
-+ libltdl_cv_preloaded_symbols=yes
-+ else
-+ libltdl_cv_preloaded_symbols=no
-+ fi
-+ ])
-+if test x"$libltdl_cv_preloaded_symbols" = xyes; then
-+ AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1,
-+ [Define if libtool can extract symbol lists from object files.])
-+fi
-+])# AC_LTDL_DLPREOPEN
-+
-+
-+# AC_LTDL_DLLIB
-+# -------------
-+AC_DEFUN([AC_LTDL_DLLIB],
-+[LIBADD_DL=
-+AC_SUBST(LIBADD_DL)
-+AC_LANG_PUSH([C])
-+
-+AC_CHECK_FUNC([shl_load],
-+ [AC_DEFINE([HAVE_SHL_LOAD], [1],
-+ [Define if you have the shl_load function.])],
-+ [AC_CHECK_LIB([dld], [shl_load],
-+ [AC_DEFINE([HAVE_SHL_LOAD], [1],
-+ [Define if you have the shl_load function.])
-+ LIBADD_DL="$LIBADD_DL -ldld"],
-+ [AC_CHECK_LIB([dl], [dlopen],
-+ [AC_DEFINE([HAVE_LIBDL], [1],
-+ [Define if you have the libdl library or equivalent.])
-+ LIBADD_DL="-ldl" libltdl_cv_lib_dl_dlopen="yes"],
-+ [AC_TRY_LINK([#if HAVE_DLFCN_H
-+# include <dlfcn.h>
-+#endif
-+ ],
-+ [dlopen(0, 0);],
-+ [AC_DEFINE([HAVE_LIBDL], [1],
-+ [Define if you have the libdl library or equivalent.]) libltdl_cv_func_dlopen="yes"],
-+ [AC_CHECK_LIB([svld], [dlopen],
-+ [AC_DEFINE([HAVE_LIBDL], [1],
-+ [Define if you have the libdl library or equivalent.])
-+ LIBADD_DL="-lsvld" libltdl_cv_func_dlopen="yes"],
-+ [AC_CHECK_LIB([dld], [dld_link],
-+ [AC_DEFINE([HAVE_DLD], [1],
-+ [Define if you have the GNU dld library.])
-+ LIBADD_DL="$LIBADD_DL -ldld"],
-+ [AC_CHECK_FUNC([_dyld_func_lookup],
-+ [AC_DEFINE([HAVE_DYLD], [1],
-+ [Define if you have the _dyld_func_lookup function.])])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ])
-+])
-+
-+if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
-+then
-+ lt_save_LIBS="$LIBS"
-+ LIBS="$LIBS $LIBADD_DL"
-+ AC_CHECK_FUNCS([dlerror])
-+ LIBS="$lt_save_LIBS"
-+fi
-+AC_LANG_POP
-+])# AC_LTDL_DLLIB
-+
-+
-+# AC_LTDL_SYMBOL_USCORE
-+# ---------------------
-+# does the compiler prefix global symbols with an underscore?
-+AC_DEFUN([AC_LTDL_SYMBOL_USCORE],
-+[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
-+AC_CACHE_CHECK([for _ prefix in compiled symbols],
-+ [ac_cv_sys_symbol_underscore],
-+ [ac_cv_sys_symbol_underscore=no
-+ cat > conftest.$ac_ext <<EOF
-+void nm_test_func(){}
-+int main(){nm_test_func;return 0;}
-+EOF
-+ if AC_TRY_EVAL(ac_compile); then
-+ # Now try to grab the symbols.
-+ ac_nlist=conftest.nm
-+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-+ # See whether the symbols have a leading underscore.
-+ if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-+ ac_cv_sys_symbol_underscore=yes
-+ else
-+ if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-+ :
-+ else
-+ echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-+ fi
-+ fi
-+ else
-+ echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
-+ fi
-+ else
-+ echo "configure: failed program was:" >&AC_FD_CC
-+ cat conftest.c >&AC_FD_CC
-+ fi
-+ rm -rf conftest*
-+ ])
-+])# AC_LTDL_SYMBOL_USCORE
-+
-+
-+# AC_LTDL_DLSYM_USCORE
-+# --------------------
-+AC_DEFUN([AC_LTDL_DLSYM_USCORE],
-+[AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])
-+if test x"$ac_cv_sys_symbol_underscore" = xyes; then
-+ if test x"$libltdl_cv_func_dlopen" = xyes ||
-+ test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
-+ AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
-+ [libltdl_cv_need_uscore],
-+ [libltdl_cv_need_uscore=unknown
-+ save_LIBS="$LIBS"
-+ LIBS="$LIBS $LIBADD_DL"
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes],
-+ [], [libltdl_cv_need_uscore=cross])
-+ LIBS="$save_LIBS"
-+ ])
-+ fi
-+fi
-+
-+if test x"$libltdl_cv_need_uscore" = xyes; then
-+ AC_DEFINE(NEED_USCORE, 1,
-+ [Define if dlsym() requires a leading underscore in symbol names.])
-+fi
-+])# AC_LTDL_DLSYM_USCORE
-+
-+# AC_LTDL_FUNC_ARGZ
-+# -----------------
-+AC_DEFUN([AC_LTDL_FUNC_ARGZ],
-+[AC_CHECK_HEADERS([argz.h])
-+
-+AC_CHECK_TYPES([error_t],
-+ [],
-+ [AC_DEFINE([error_t], [int],
-+ [Define to a type to use for `error_t' if it is not otherwise available.])],
-+ [#if HAVE_ARGZ_H
-+# include <argz.h>
-+#endif])
-+
-+AC_CHECK_FUNCS([argz_append argz_create_sep argz_insert argz_next argz_stringify])
-+])# AC_LTDL_FUNC_ARGZ
-diff -urNd -urNd libtool-1.5/Makefile.am libtool-1.5.m4/Makefile.am
---- libtool-1.5/Makefile.am 2003-04-14 17:58:22.000000000 -0400
-+++ libtool-1.5.m4/Makefile.am 2004-05-04 18:01:10.000000000 -0400
-@@ -15,7 +15,7 @@
- FFLAGS = @FFLAGS@
- FLIBS = @FLIBS@
-
--aclocal_macros = libtool.m4 ltdl.m4
-+aclocal_macros = m4/libtool.m4 m4/ltdl.m4
-
- EXTRA_DIST = $(aclocal_macros) bootstrap libtoolize.in ltmain.in \
- mkstamp ChangeLog.0 ChangeLog.1
-@@ -50,7 +50,7 @@
-
- # TSDEPS will be defined to TSDEPS_DIST at `make dist' time
- TSDEPS =
--TSDEPS_DIST = ChangeLog libtool.m4
-+TSDEPS_DIST = ChangeLog m4/libtool.m4
- CVS = cvs # set it to `:' to avoid CVS operations
-
- .PHONY: timestamps update-timestamps
-@@ -60,18 +60,6 @@
- $(CVS) -n update $(TSDEPS_DIST) | grep '^M'); then \
- echo "Cannot make dist before commit"; exit 1; else :; fi
-
--# All our rules should depend on these demo files.
--all-recursive: $(srcdir)/libltdl/acinclude.m4 $(ACINCLUDE_M4_LIST)
--
--@srcdir@/libltdl/acinclude.m4: $(srcdir)/libtool.m4 $(srcdir)/ltdl.m4
-- -rm -f $@ $@T
-- cat $(srcdir)/libtool.m4 $(srcdir)/ltdl.m4 > $@T
-- mv $@T $@
--
--@ACINCLUDE_M4_LIST@: $(srcdir)/libtool.m4
-- -rm -f $@ $@T
-- cat $(srcdir)/libtool.m4 > $@T
-- mv $@T $@
-
- .PHONY: configure-subdirs
- configure-subdirs distdir: $(DIST_MAKEFILE_LIST)
-diff -urNd -urNd libtool-1.5/mdemo/acinclude.m4 libtool-1.5.m4/mdemo/acinclude.m4
---- libtool-1.5/mdemo/acinclude.m4 2003-04-14 18:30:09.000000000 -0400
-+++ libtool-1.5.m4/mdemo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/pdemo/acinclude.m4 libtool-1.5.m4/pdemo/acinclude.m4
---- libtool-1.5/pdemo/acinclude.m4 2003-04-14 18:30:19.000000000 -0400
-+++ libtool-1.5.m4/pdemo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
-diff -urNd -urNd libtool-1.5/pdemo/Makefile.am libtool-1.5.m4/pdemo/Makefile.am
---- libtool-1.5/pdemo/Makefile.am 2002-11-19 04:42:39.000000000 -0500
-+++ libtool-1.5.m4/pdemo/Makefile.am 2004-05-04 18:01:23.000000000 -0400
-@@ -2,8 +2,6 @@
-
- AUTOMAKE_OPTIONS = no-dependencies foreign
-
--EXTRA_DIST = acinclude.m4
--
- # Build a libtool library, libhello.la for installation in libdir.
- lib_LTLIBRARIES = libhello.la
- libhello_la_SOURCES = longer_file_name_hello.c longer_file_name_foo.c longer_file_name_foo2.c
-@@ -62,13 +60,6 @@
- # to its private directory.
- objdir = `$(LIBTOOL) --config | sed -n -e 's/^objdir=\(.*\)$$/\1/p'`
-
--# The following rules are only for the libtool demo and tests.
--# Regenerate our acinclude.m4 only if it doesn't exist.
--$(srcdir)/acinclude.m4:
-- rm -f $(srcdir)/acinclude.m4
-- cd $(srcdir) && $(LN_S) ../libtool.m4 acinclude.m4
--
--
- # Test programs to see what gets hardcoded.
- .PHONY: hardcode
- hardcode: $(hardcode_tests)
-diff -urNd -urNd libtool-1.5/tagdemo/acinclude.m4 libtool-1.5.m4/tagdemo/acinclude.m4
---- libtool-1.5/tagdemo/acinclude.m4 2003-04-14 18:30:29.000000000 -0400
-+++ libtool-1.5.m4/tagdemo/acinclude.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,5867 +0,0 @@
--# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
--## Copyright 1996, 1997, 1998, 1999, 2000, 2001
--## Free Software Foundation, Inc.
--## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--##
--## This program is free software; you can redistribute it and/or modify
--## it under the terms of the GNU General Public License as published by
--## the Free Software Foundation; either version 2 of the License, or
--## (at your option) any later version.
--##
--## This program is distributed in the hope that it will be useful, but
--## WITHOUT ANY WARRANTY; without even the implied warranty of
--## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--## General Public License for more details.
--##
--## You should have received a copy of the GNU General Public License
--## along with this program; if not, write to the Free Software
--## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--##
--## As a special exception to the GNU General Public License, if you
--## distribute this file as part of a program that contains a
--## configuration script generated by Autoconf, you may include it under
--## the same distribution terms that you use for the rest of that program.
--
--# serial 47 AC_PROG_LIBTOOL
--
--
--# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
--# -----------------------------------------------------------
--# If this macro is not defined by Autoconf, define it here.
--m4_ifdef([AC_PROVIDE_IFELSE],
-- [],
-- [m4_define([AC_PROVIDE_IFELSE],
-- [m4_ifdef([AC_PROVIDE_$1],
-- [$2], [$3])])])
--
--
--# AC_PROG_LIBTOOL
--# ---------------
--AC_DEFUN([AC_PROG_LIBTOOL],
--[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
--dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
--dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-- AC_PROVIDE_IFELSE([AC_PROG_CXX],
-- [AC_LIBTOOL_CXX],
-- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-- ])])
--dnl And a similar setup for Fortran 77 support
-- AC_PROVIDE_IFELSE([AC_PROG_F77],
-- [AC_LIBTOOL_F77],
-- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
--])])
--
--dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
--dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
--dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-- [AC_LIBTOOL_GCJ],
-- [ifdef([AC_PROG_GCJ],
-- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([A][M_PROG_GCJ],
-- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-- ifdef([LT_AC_PROG_GCJ],
-- [define([LT_AC_PROG_GCJ],
-- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
--])])# AC_PROG_LIBTOOL
--
--
--# _AC_PROG_LIBTOOL
--# ----------------
--AC_DEFUN([_AC_PROG_LIBTOOL],
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
--AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Prevent multiple expansion
--define([AC_PROG_LIBTOOL], [])
--])# _AC_PROG_LIBTOOL
--
--
--# AC_LIBTOOL_SETUP
--# ----------------
--AC_DEFUN([AC_LIBTOOL_SETUP],
--[AC_PREREQ(2.50)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--
--AC_REQUIRE([AC_PROG_LN_S])dnl
--AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
--# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
--AC_REQUIRE([AC_OBJEXT])dnl
--AC_REQUIRE([AC_EXEEXT])dnl
--dnl
--
--AC_LIBTOOL_SYS_MAX_CMD_LEN
--AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--AC_LIBTOOL_OBJDIR
--
--AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--_LT_AC_PROG_ECHO_BACKSLASH
--
--case $host_os in
--aix3*)
-- # AIX sometimes has problems with the GCC collect2 program. For some
-- # reason, if we set the COLLECT_NAMES environment variable, the problems
-- # vanish in a puff of smoke.
-- if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
-- fi
-- ;;
--esac
--
--# Sed substitution that helps us do robust quoting. It backslashifies
--# metacharacters that are still active within double-quoted strings.
--Xsed='sed -e s/^X//'
--[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
--
--# Same as above, but do not quote variable references.
--[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
--
--# Sed substitution to delay expansion of an escaped shell variable in a
--# double_quote_subst'ed string.
--delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
--
--# Sed substitution to avoid accidental globbing in evaled expressions
--no_glob_subst='s/\*/\\\*/g'
--
--# Constants:
--rm="rm -f"
--
--# Global variables:
--default_ofile=libtool
--can_build_shared=yes
--
--# All known linkers require a `.a' archive for static linking (except M$VC,
--# which needs '.lib').
--libext=a
--ltmain="$ac_aux_dir/ltmain.sh"
--ofile="$default_ofile"
--with_gnu_ld="$lt_cv_prog_gnu_ld"
--
--AC_CHECK_TOOL(AR, ar, false)
--AC_CHECK_TOOL(RANLIB, ranlib, :)
--AC_CHECK_TOOL(STRIP, strip, :)
--
--old_CC="$CC"
--old_CFLAGS="$CFLAGS"
--
--# Set sane defaults for various variables
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--test -z "$AS" && AS=as
--test -z "$CC" && CC=cc
--test -z "$LTCC" && LTCC=$CC
--test -z "$DLLTOOL" && DLLTOOL=dlltool
--test -z "$LD" && LD=ld
--test -z "$LN_S" && LN_S="ln -s"
--test -z "$MAGIC_CMD" && MAGIC_CMD=file
--test -z "$NM" && NM=nm
--test -z "$SED" && SED=sed
--test -z "$OBJDUMP" && OBJDUMP=objdump
--test -z "$RANLIB" && RANLIB=:
--test -z "$STRIP" && STRIP=:
--test -z "$ac_objext" && ac_objext=o
--
--# Determine commands to create old-style static archives.
--old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
--old_postinstall_cmds='chmod 644 $oldlib'
--old_postuninstall_cmds=
--
--if test -n "$RANLIB"; then
-- case $host_os in
-- openbsd*)
-- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-- ;;
-- *)
-- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-- ;;
-- esac
-- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
--fi
--
--# Only perform the check for file, if the check method requires it
--case $deplibs_check_method in
--file_magic*)
-- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-- AC_PATH_MAGIC
-- fi
-- ;;
--esac
--
--AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--enable_win32_dll=yes, enable_win32_dll=no)
--
--AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--AC_ARG_WITH([pic],
-- [AC_HELP_STRING([--with-pic],
-- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-- [pic_mode="$withval"],
-- [pic_mode=default])
--test -z "$pic_mode" && pic_mode=default
--
--# Use C for the default configuration in the libtool script
--tagname=
--AC_LIBTOOL_LANG_C_CONFIG
--_LT_AC_TAGCONFIG
--])# AC_LIBTOOL_SETUP
--
--
--# _LT_AC_SYS_COMPILER
--# -------------------
--AC_DEFUN([_LT_AC_SYS_COMPILER],
--[AC_REQUIRE([AC_PROG_CC])dnl
--
--# If no C compiler was specified, use CC.
--LTCC=${LTCC-"$CC"}
--
--# Allow CC to be a program name with arguments.
--compiler=$CC
--])# _LT_AC_SYS_COMPILER
--
--
--# _LT_AC_SYS_LIBPATH_AIX
--# ----------------------
--# Links a minimal program and checks the executable
--# for the system default hardcoded library path. In most cases,
--# this is /usr/lib:/lib, but when the MPI compilers are used
--# the location of the communication and MPI libs are included too.
--# If we don't find anything, use the default library path according
--# to the aix ld manual.
--AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
--[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
--}'`; fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--])# _LT_AC_SYS_LIBPATH_AIX
--
--
--# _LT_AC_SHELL_INIT(ARG)
--# ----------------------
--AC_DEFUN([_LT_AC_SHELL_INIT],
--[ifdef([AC_DIVERSION_NOTICE],
-- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-- [AC_DIVERT_PUSH(NOTICE)])
--$1
--AC_DIVERT_POP
--])# _LT_AC_SHELL_INIT
--
--
--# _LT_AC_PROG_ECHO_BACKSLASH
--# --------------------------
--# Add some code to the start of the generated configure script which
--# will find an echo command which doesn't interpret backslashes.
--AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
--[_LT_AC_SHELL_INIT([
--# Check that we are running under the correct shell.
--SHELL=${CONFIG_SHELL-/bin/sh}
--
--case X$ECHO in
--X*--fallback-echo)
-- # Remove one level of quotation (which was required for Make).
-- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-- ;;
--esac
--
--echo=${ECHO-echo}
--if test "X[$]1" = X--no-reexec; then
-- # Discard the --no-reexec flag, and continue.
-- shift
--elif test "X[$]1" = X--fallback-echo; then
-- # Avoid inline document here, it may be left over
-- :
--elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-- # Yippee, $echo works!
-- :
--else
-- # Restart under the correct shell.
-- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
--fi
--
--if test "X[$]1" = X--fallback-echo; then
-- # used as fallback echo
-- shift
-- cat <<EOF
--[$]*
--EOF
-- exit 0
--fi
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--if test -z "$ECHO"; then
--if test "X${echo_test_string+set}" != Xset; then
--# find a string as large as possible, as long as the shell can cope with it
-- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-- echo_test_string="`eval $cmd`" &&
-- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-- then
-- break
-- fi
-- done
--fi
--
--if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- :
--else
-- # The Solaris, AIX, and Digital Unix default echo programs unquote
-- # backslashes. This makes it impossible to quote backslashes using
-- # echo "$something" | sed 's/\\/\\\\/g'
-- #
-- # So, first we look for a working echo in the user's PATH.
--
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for dir in $PATH /usr/ucb; do
-- IFS="$lt_save_ifs"
-- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$dir/echo"
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- if test "X$echo" = Xecho; then
-- # We didn't find a better echo, so look for alternatives.
-- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # This shell has a builtin print -r that does the trick.
-- echo='print -r'
-- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-- test "X$CONFIG_SHELL" != X/bin/ksh; then
-- # If we have ksh, try running configure again with it.
-- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-- export ORIGINAL_CONFIG_SHELL
-- CONFIG_SHELL=/bin/ksh
-- export CONFIG_SHELL
-- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-- else
-- # Try using printf.
-- echo='printf %s\n'
-- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- # Cool, printf works
-- :
-- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-- export CONFIG_SHELL
-- SHELL="$CONFIG_SHELL"
-- export SHELL
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-- test "X$echo_testing_string" = 'X\t' &&
-- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-- test "X$echo_testing_string" = "X$echo_test_string"; then
-- echo="$CONFIG_SHELL [$]0 --fallback-echo"
-- else
-- # maybe with a smaller string...
-- prev=:
--
-- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-- then
-- break
-- fi
-- prev="$cmd"
-- done
--
-- if test "$prev" != 'sed 50q "[$]0"'; then
-- echo_test_string=`eval $prev`
-- export echo_test_string
-- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-- else
-- # Oops. We lost completely, so just stick with echo.
-- echo=echo
-- fi
-- fi
-- fi
-- fi
--fi
--fi
--
--# Copy echo and quote the copy suitably for passing to libtool from
--# the Makefile, instead of quoting the original, which is used later.
--ECHO=$echo
--if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
--fi
--
--AC_SUBST(ECHO)
--])])# _LT_AC_PROG_ECHO_BACKSLASH
--
--
--# _LT_AC_LOCK
--# -----------
--AC_DEFUN([_LT_AC_LOCK],
--[AC_ARG_ENABLE([libtool-lock],
-- [AC_HELP_STRING([--disable-libtool-lock],
-- [avoid locking (might break parallel builds)])])
--test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case $host in
--ia64-*-hpux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *ELF-32*)
-- HPUX_IA64_MODE="32"
-- ;;
-- *ELF-64*)
-- HPUX_IA64_MODE="64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -melf32bsmip"
-- ;;
-- *N32*)
-- LD="${LD-ld} -melf32bmipn32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -melf64bmip"
-- ;;
-- esac
-- else
-- case `/usr/bin/file conftest.$ac_objext` in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- fi
-- rm -rf conftest*
-- ;;
--
--x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-- # Find out which ABI we are using.
-- echo 'int i;' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_i386"
-- ;;
-- ppc64-*linux*)
-- LD="${LD-ld} -m elf32ppclinux"
-- ;;
-- s390x-*linux*)
-- LD="${LD-ld} -m elf_s390"
-- ;;
-- sparc64-*linux*)
-- LD="${LD-ld} -m elf32_sparc"
-- ;;
-- esac
-- ;;
-- *64-bit*)
-- case $host in
-- x86_64-*linux*)
-- LD="${LD-ld} -m elf_x86_64"
-- ;;
-- ppc*-*linux*|powerpc*-*linux*)
-- LD="${LD-ld} -m elf64ppc"
-- ;;
-- s390*-*linux*)
-- LD="${LD-ld} -m elf64_s390"
-- ;;
-- sparc*-*linux*)
-- LD="${LD-ld} -m elf64_sparc"
-- ;;
-- esac
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_LANG_PUSH(C)
-- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-- AC_LANG_POP])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
-- ])
--esac
--
--need_locks="$enable_libtool_lock"
--
--])# _LT_AC_LOCK
--
--
--# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
--# ----------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-- lt_compiler_flag="$3"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- # The option is referenced via a variable to avoid confusing sed.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>conftest.err)
-- ac_status=$?
-- cat conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s "$ac_outfile"; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s conftest.err; then
-- $2=yes
-- fi
-- fi
-- $rm conftest*
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$5], , :, [$5])
--else
-- ifelse([$6], , :, [$6])
--fi
--])# AC_LIBTOOL_COMPILER_OPTION
--
--
--# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
--# [ACTION-SUCCESS], [ACTION-FAILURE])
--# ------------------------------------------------------------
--# Check whether the given compiler option works
--AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
--[AC_CACHE_CHECK([$1], [$2],
-- [$2=no
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS $3"
-- printf "$lt_simple_link_test_code" > conftest.$ac_ext
-- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test -s conftest.err; then
-- # Append any errors to the config.log.
-- cat conftest.err 1>&AS_MESSAGE_LOG_FD
-- else
-- $2=yes
-- fi
-- fi
-- $rm conftest*
-- LDFLAGS="$save_LDFLAGS"
--])
--
--if test x"[$]$2" = xyes; then
-- ifelse([$4], , :, [$4])
--else
-- ifelse([$5], , :, [$5])
--fi
--])# AC_LIBTOOL_LINKER_OPTION
--
--
--# AC_LIBTOOL_SYS_MAX_CMD_LEN
--# --------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
--[# find the maximum length of command line arguments
--AC_MSG_CHECKING([the maximum length of command line arguments])
--AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-- i=0
-- testring="ABCD"
--
-- case $build_os in
-- msdosdjgpp*)
-- # On DJGPP, this test can blow up pretty badly due to problems in libc
-- # (any single argument exceeding 2000 bytes causes a buffer overrun
-- # during glob expansion). Even if it were fixed, the result of this
-- # check would be larger than it should be.
-- lt_cv_sys_max_cmd_len=12288; # 12K is about right
-- ;;
--
-- gnu*)
-- # Under GNU Hurd, this test is not required because there is
-- # no limit to the length of command line arguments.
-- # Libtool will interpret -1 as no limit whatsoever
-- lt_cv_sys_max_cmd_len=-1;
-- ;;
--
-- cygwin* | mingw*)
-- # On Win9x/ME, this test blows up -- it succeeds, but takes
-- # about 5 minutes as the teststring grows exponentially.
-- # Worse, since 9x/ME are not pre-emptively multitasking,
-- # you end up with a "frozen" computer, even though with patience
-- # the test eventually succeeds (with a max line length of 256k).
-- # Instead, let's just punt: use the minimum linelength reported by
-- # all of the supported platforms: 8192 (on NT/2K/XP).
-- lt_cv_sys_max_cmd_len=8192;
-- ;;
--
-- *)
-- # If test is not a shell built-in, we'll probably end up computing a
-- # maximum length that is only half of the actual maximum length, but
-- # we can't tell.
-- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \
-- = "XX$testring") >/dev/null 2>&1 &&
-- new_result=`expr "X$testring" : ".*" 2>&1` &&
-- lt_cv_sys_max_cmd_len=$new_result &&
-- test $i != 17 # 1/2 MB should be enough
-- do
-- i=`expr $i + 1`
-- testring=$testring$testring
-- done
-- testring=
-- # Add a significant safety factor because C++ compilers can tack on massive
-- # amounts of additional arguments before passing them to the linker.
-- # It appears as though 1/2 is a usable value.
-- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-- ;;
-- esac
--])
--if test -n $lt_cv_sys_max_cmd_len ; then
-- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
--else
-- AC_MSG_RESULT(none)
--fi
--])# AC_LIBTOOL_SYS_MAX_CMD_LEN
--
--
--# _LT_AC_CHECK_DLFCN
--# --------------------
--AC_DEFUN([_LT_AC_CHECK_DLFCN],
--[AC_CHECK_HEADERS(dlfcn.h)dnl
--])# _LT_AC_CHECK_DLFCN
--
--
--# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
--# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
--# ------------------------------------------------------------------
--AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "$cross_compiling" = yes; then :
-- [$4]
--else
-- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-- lt_status=$lt_dlunknown
-- cat > conftest.$ac_ext <<EOF
--[#line __oline__ "configure"
--#include "confdefs.h"
--
--#if HAVE_DLFCN_H
--#include <dlfcn.h>
--#endif
--
--#include <stdio.h>
--
--#ifdef RTLD_GLOBAL
--# define LT_DLGLOBAL RTLD_GLOBAL
--#else
--# ifdef DL_GLOBAL
--# define LT_DLGLOBAL DL_GLOBAL
--# else
--# define LT_DLGLOBAL 0
--# endif
--#endif
--
--/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-- find out it does not work in some platform. */
--#ifndef LT_DLLAZY_OR_NOW
--# ifdef RTLD_LAZY
--# define LT_DLLAZY_OR_NOW RTLD_LAZY
--# else
--# ifdef DL_LAZY
--# define LT_DLLAZY_OR_NOW DL_LAZY
--# else
--# ifdef RTLD_NOW
--# define LT_DLLAZY_OR_NOW RTLD_NOW
--# else
--# ifdef DL_NOW
--# define LT_DLLAZY_OR_NOW DL_NOW
--# else
--# define LT_DLLAZY_OR_NOW 0
--# endif
--# endif
--# endif
--# endif
--#endif
--
--#ifdef __cplusplus
--extern "C" void exit (int);
--#endif
--
--void fnord() { int i=42;}
--int main ()
--{
-- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-- int status = $lt_dlunknown;
--
-- if (self)
-- {
-- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-- /* dlclose (self); */
-- }
--
-- exit (status);
--}]
--EOF
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-- (./conftest; exit; ) 2>/dev/null
-- lt_status=$?
-- case x$lt_status in
-- x$lt_dlno_uscore) $1 ;;
-- x$lt_dlneed_uscore) $2 ;;
-- x$lt_unknown|x*) $3 ;;
-- esac
-- else :
-- # compilation failed
-- $3
-- fi
--fi
--rm -fr conftest*
--])# _LT_AC_TRY_DLOPEN_SELF
--
--
--# AC_LIBTOOL_DLOPEN_SELF
--# -------------------
--AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
--[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
--if test "x$enable_dlopen" != xyes; then
-- enable_dlopen=unknown
-- enable_dlopen_self=unknown
-- enable_dlopen_self_static=unknown
--else
-- lt_cv_dlopen=no
-- lt_cv_dlopen_libs=
--
-- case $host_os in
-- beos*)
-- lt_cv_dlopen="load_add_on"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ;;
--
-- mingw* | pw32*)
-- lt_cv_dlopen="LoadLibrary"
-- lt_cv_dlopen_libs=
-- ;;
--
-- cygwin*)
-- lt_cv_dlopen="dlopen"
-- lt_cv_dlopen_libs=
-- ;;
--
-- darwin*)
-- # if libdl is installed we need to link against it
-- AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-- lt_cv_dlopen="dyld"
-- lt_cv_dlopen_libs=
-- lt_cv_dlopen_self=yes
-- ])
-- ;;
--
-- *)
-- AC_CHECK_FUNC([shl_load],
-- [lt_cv_dlopen="shl_load"],
-- [AC_CHECK_LIB([dld], [shl_load],
-- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-- [AC_CHECK_FUNC([dlopen],
-- [lt_cv_dlopen="dlopen"],
-- [AC_CHECK_LIB([dl], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-- [AC_CHECK_LIB([svld], [dlopen],
-- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-- [AC_CHECK_LIB([dld], [dld_link],
-- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-- ])
-- ])
-- ])
-- ])
-- ])
-- ;;
-- esac
--
-- if test "x$lt_cv_dlopen" != xno; then
-- enable_dlopen=yes
-- else
-- enable_dlopen=no
-- fi
--
-- case $lt_cv_dlopen in
-- dlopen)
-- save_CPPFLAGS="$CPPFLAGS"
-- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
--
-- save_LDFLAGS="$LDFLAGS"
-- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
--
-- save_LIBS="$LIBS"
-- LIBS="$lt_cv_dlopen_libs $LIBS"
--
-- AC_CACHE_CHECK([whether a program can dlopen itself],
-- lt_cv_dlopen_self, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-- ])
--
-- if test "x$lt_cv_dlopen_self" = xyes; then
-- LDFLAGS="$LDFLAGS $link_static_flag"
-- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-- lt_cv_dlopen_self_static, [dnl
-- _LT_AC_TRY_DLOPEN_SELF(
-- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-- ])
-- fi
--
-- CPPFLAGS="$save_CPPFLAGS"
-- LDFLAGS="$save_LDFLAGS"
-- LIBS="$save_LIBS"
-- ;;
-- esac
--
-- case $lt_cv_dlopen_self in
-- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-- *) enable_dlopen_self=unknown ;;
-- esac
--
-- case $lt_cv_dlopen_self_static in
-- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-- *) enable_dlopen_self_static=unknown ;;
-- esac
--fi
--])# AC_LIBTOOL_DLOPEN_SELF
--
--
--# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
--# ---------------------------------
--# Check to see if options -c and -o are simultaneously supported by compiler
--AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-- $rm -r conftest 2>/dev/null
-- mkdir conftest
-- cd conftest
-- mkdir out
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-- # that will create temporary files in the current directory regardless of
-- # the output directory. Thus, making CWD read-only will cause this test
-- # to fail, enabling locking or at least warning the user not to do parallel
-- # builds.
-- chmod -w .
--
-- lt_compiler_flag="-o out/conftest2.$ac_objext"
-- # Insert the option either (1) after the last *FLAGS variable, or
-- # (2) before a word containing "conftest.", or (3) at the end.
-- # Note that $ac_compile itself does not contain backslashes and begins
-- # with a dollar sign (not a hyphen), so the echo should work correctly.
-- lt_compile=`echo "$ac_compile" | $SED \
-- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-- -e 's:$: $lt_compiler_flag:'`
-- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-- (eval "$lt_compile" 2>out/conftest.err)
-- ac_status=$?
-- cat out/conftest.err >&AS_MESSAGE_LOG_FD
-- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-- if (exit $ac_status) && test -s out/conftest2.$ac_objext
-- then
-- # The compiler can only warn and ignore the option if not recognized
-- # So say no if there are warnings
-- if test ! -s out/conftest.err; then
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-- fi
-- fi
-- chmod u+w .
-- $rm conftest* out/*
-- rmdir out
-- cd ..
-- rmdir conftest
-- $rm conftest*
--])
--])# AC_LIBTOOL_PROG_CC_C_O
--
--
--# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
--# -----------------------------------------
--# Check to see if we can do hard links to lock some files if needed
--AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
--[AC_REQUIRE([_LT_AC_LOCK])dnl
--
--hard_links="nottested"
--if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-- # do not overwrite the value of need_locks provided by the user
-- AC_MSG_CHECKING([if we can lock with hard links])
-- hard_links=yes
-- $rm conftest*
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- touch conftest.a
-- ln conftest.a conftest.b 2>&5 || hard_links=no
-- ln conftest.a conftest.b 2>/dev/null && hard_links=no
-- AC_MSG_RESULT([$hard_links])
-- if test "$hard_links" = no; then
-- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-- need_locks=warn
-- fi
--else
-- need_locks=no
--fi
--])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
--
--
--# AC_LIBTOOL_OBJDIR
--# -----------------
--AC_DEFUN([AC_LIBTOOL_OBJDIR],
--[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
--[rm -f .libs 2>/dev/null
--mkdir .libs 2>/dev/null
--if test -d .libs; then
-- lt_cv_objdir=.libs
--else
-- # MS-DOS does not allow filenames that begin with a dot.
-- lt_cv_objdir=_libs
--fi
--rmdir .libs 2>/dev/null])
--objdir=$lt_cv_objdir
--])# AC_LIBTOOL_OBJDIR
--
--
--# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
--# ----------------------------------------------
--# Check hardcoding attributes.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
--[AC_MSG_CHECKING([how to hardcode library paths into programs])
--_LT_AC_TAGVAR(hardcode_action, $1)=
--if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
--
-- # We can hardcode non-existant directories.
-- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-- # If the only mechanism to avoid hardcoding is shlibpath_var, we
-- # have to relink, otherwise we might link with an installed library
-- # when we should be linking with a yet-to-be-installed one
-- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-- # Linking always hardcodes the temporary library directory.
-- _LT_AC_TAGVAR(hardcode_action, $1)=relink
-- else
-- # We can link without hardcoding, and we can hardcode nonexisting dirs.
-- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-- fi
--else
-- # We cannot hardcode anything, or else we can only hardcode existing
-- # directories.
-- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
--fi
--AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
--
--if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-- # Fast installation is not supported
-- enable_fast_install=no
--elif test "$shlibpath_overrides_runpath" = yes ||
-- test "$enable_shared" = no; then
-- # Fast installation is not necessary
-- enable_fast_install=needless
--fi
--])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
--
--
--# AC_LIBTOOL_SYS_LIB_STRIP
--# ------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
--[striplib=
--old_striplib=
--AC_MSG_CHECKING([whether stripping libraries is possible])
--if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-- AC_MSG_RESULT([yes])
--else
--# FIXME - insert some real tests, host_os isn't really good enough
-- case $host_os in
-- darwin*)
-- if test -n "$STRIP" ; then
-- striplib="$STRIP -x"
-- AC_MSG_RESULT([yes])
-- else
-- AC_MSG_RESULT([no])
--fi
-- ;;
-- *)
-- AC_MSG_RESULT([no])
-- ;;
-- esac
--fi
--])# AC_LIBTOOL_SYS_LIB_STRIP
--
--
--# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--# -----------------------------
--# PORTME Fill in your ld.so characteristics
--AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
--[AC_MSG_CHECKING([dynamic linker characteristics])
--library_names_spec=
--libname_spec='lib$name'
--soname_spec=
--shrext=".so"
--postinstall_cmds=
--postuninstall_cmds=
--finish_cmds=
--finish_eval=
--shlibpath_var=
--shlibpath_overrides_runpath=unknown
--version_type=none
--dynamic_linker="$host_os ld.so"
--sys_lib_dlsearch_path_spec="/lib /usr/lib"
--if test "$GCC" = yes; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-- # if the path contains ";" then we assume it to be the separator
-- # otherwise default to the standard path separator (i.e. ":") - it is
-- # assumed that no part of a normal pathname contains ";" but that should
-- # okay in the real world where ";" in dirpaths is itself problematic.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
--else
-- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
--fi
--need_lib_prefix=unknown
--hardcode_into_libs=no
--
--# when you set need_version to no, make sure it does not cause -set_version
--# flags to be left without arguments
--need_version=unknown
--
--case $host_os in
--aix3*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-- shlibpath_var=LIBPATH
--
-- # AIX 3 has no versioning support, so we append a major version to the name.
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
--
--aix4* | aix5*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- hardcode_into_libs=yes
-- if test "$host_cpu" = ia64; then
-- # AIX 5 supports IA64
-- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- else
-- # With GCC up to 2.95.x, collect2 would create an import file
-- # for dependence libraries. The import file would start with
-- # the line `#! .'. This would cause the generated library to
-- # depend on `.', always an invalid library. This was fixed in
-- # development snapshots of GCC prior to 3.0.
-- case $host_os in
-- aix4 | aix4.[[01]] | aix4.[[01]].*)
-- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-- echo ' yes '
-- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-- :
-- else
-- can_build_shared=no
-- fi
-- ;;
-- esac
-- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-- # soname into executable. Probably we can add versioning support to
-- # collect2, so additional links can be useful in future.
-- if test "$aix_use_runtimelinking" = yes; then
-- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-- # instead of lib<name>.a to let people know that these are not
-- # typical AIX shared libraries.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- else
-- # We preserve .a as extension for shared libraries through AIX4.2
-- # and later when we are not doing run time linking.
-- library_names_spec='${libname}${release}.a $libname.a'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- fi
-- shlibpath_var=LIBPATH
-- fi
-- ;;
--
--amigaos*)
-- library_names_spec='$libname.ixlibrary $libname.a'
-- # Create ${libname}_ixlibrary.a entries in /sys/libs.
-- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-- ;;
--
--beos*)
-- library_names_spec='${libname}${shared_ext}'
-- dynamic_linker="$host_os ld.so"
-- shlibpath_var=LIBRARY_PATH
-- ;;
--
--bsdi4*)
-- version_type=linux
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-- # the default ld.so.conf also contains /usr/contrib/lib and
-- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-- # libtool to hard-code these into programs
-- ;;
--
--cygwin* | mingw* | pw32*)
-- version_type=windows
-- shrext=".dll"
-- need_version=no
-- need_lib_prefix=no
--
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32*)
-- library_names_spec='$libname.dll.a'
-- # DLL is installed to $(libdir)/../bin by postinstall_cmds
-- postinstall_cmds='base_file=`basename \${file}`~
-- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-- dldir=$destdir/`dirname \$dlpath`~
-- test -d \$dldir || mkdir -p \$dldir~
-- $install_prog $dir/$dlname \$dldir/$dlname'
-- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-- dlpath=$dir/\$dldll~
-- $rm \$dlpath'
-- shlibpath_overrides_runpath=yes
--
-- case $host_os in
-- cygwin*)
-- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib"
-- ;;
-- mingw*)
-- # MinGW DLLs use traditional 'lib' prefix
-- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-- # It is most probably a Windows format PATH printed by
-- # mingw gcc, but we are running on Cygwin. Gcc prints its search
-- # path with ; separators, and with drive letters. We can handle the
-- # drive letters (cygwin fileutils understands them), so leave them,
-- # especially as we might pass files found there to a mingw objdump,
-- # which wouldn't understand a cygwinified path. Ahh.
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-- else
-- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-- fi
-- ;;
-- pw32*)
-- # pw32 DLLs use 'pw' prefix rather than 'lib'
-- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-- ;;
-- esac
-- ;;
--
-- *)
-- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-- ;;
-- esac
-- dynamic_linker='Win32 ld.exe'
-- # FIXME: first we should search . and the directory the executable is in
-- shlibpath_var=PATH
-- ;;
--
--darwin* | rhapsody*)
-- dynamic_linker="$host_os dyld"
-- version_type=darwin
-- need_lib_prefix=no
-- need_version=no
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes.
-- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-- soname_spec='${libname}${release}${major}$shared_ext'
-- shlibpath_overrides_runpath=yes
-- shlibpath_var=DYLD_LIBRARY_PATH
-- shrext='$(test .$module = .yes && echo .so || echo .dylib)'
-- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-- fi
-- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-- ;;
--
--dgux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--freebsd1*)
-- dynamic_linker=no
-- ;;
--
--freebsd*)
-- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-- version_type=freebsd-$objformat
-- case $version_type in
-- freebsd-elf*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-- need_version=no
-- need_lib_prefix=no
-- ;;
-- freebsd-*)
-- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-- need_version=yes
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_os in
-- freebsd2*)
-- shlibpath_overrides_runpath=yes
-- ;;
-- freebsd3.[01]* | freebsdelf3.[01]*)
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
-- *) # from 3.2 on
-- shlibpath_overrides_runpath=no
-- hardcode_into_libs=yes
-- ;;
-- esac
-- ;;
--
--gnu*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- hardcode_into_libs=yes
-- ;;
--
--hpux9* | hpux10* | hpux11*)
-- # Give a soname corresponding to the major version so that dld.sl refuses to
-- # link against other versions.
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- case "$host_cpu" in
-- ia64*)
-- shrext='.so'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.so"
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- if test "X$HPUX_IA64_MODE" = X32; then
-- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-- else
-- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-- fi
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- hppa*64*)
-- shrext='.sl'
-- hardcode_into_libs=yes
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-- ;;
-- *)
-- shrext='.sl'
-- dynamic_linker="$host_os dld.sl"
-- shlibpath_var=SHLIB_PATH
-- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- ;;
-- esac
-- # HP-UX runs *really* slowly unless shared libraries are mode 555.
-- postinstall_cmds='chmod 555 $lib'
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- nonstopux*) version_type=nonstopux ;;
-- *)
-- if test "$lt_cv_prog_gnu_ld" = yes; then
-- version_type=linux
-- else
-- version_type=irix
-- fi ;;
-- esac
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-- case $host_os in
-- irix5* | nonstopux*)
-- libsuff= shlibsuff=
-- ;;
-- *)
-- case $LD in # libtool.m4 will add one of these switches to LD
-- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-- libsuff= shlibsuff= libmagic=32-bit;;
-- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-- libsuff=32 shlibsuff=N32 libmagic=N32;;
-- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-- libsuff=64 shlibsuff=64 libmagic=64-bit;;
-- *) libsuff= shlibsuff= libmagic=never-match;;
-- esac
-- ;;
-- esac
-- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-- hardcode_into_libs=yes
-- ;;
--
--# No shared lib support for Linux oldld, aout, or coff.
--linux*oldld* | linux*aout* | linux*coff*)
-- dynamic_linker=no
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=no
-- # This implies no fast_install, which is unacceptable.
-- # Some rework will be needed to allow for fast_install
-- # before this can be enabled.
-- hardcode_into_libs=yes
--
-- # We used to test for /lib/ld.so.1 and disable shared libraries on
-- # powerpc, because MkLinux only supported shared libraries with the
-- # GNU dynamic linker. Since this was broken with cross compilers,
-- # most powerpc-linux boxes support dynamic linking these days and
-- # people can always --disable-shared, the test was removed, and we
-- # assume the GNU/Linux dynamic linker is in use.
-- dynamic_linker='GNU/Linux ld.so'
-- ;;
--
--netbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- dynamic_linker='NetBSD (a.out) ld.so'
-- else
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- dynamic_linker='NetBSD ld.elf_so'
-- fi
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- ;;
--
--newsos6)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--nto-qnx)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- ;;
--
--openbsd*)
-- version_type=sunos
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- case $host_os in
-- openbsd2.[[89]] | openbsd2.[[89]].*)
-- shlibpath_overrides_runpath=no
-- ;;
-- *)
-- shlibpath_overrides_runpath=yes
-- ;;
-- esac
-- else
-- shlibpath_overrides_runpath=yes
-- fi
-- ;;
--
--os2*)
-- libname_spec='$name'
-- shrext=".dll"
-- need_lib_prefix=no
-- library_names_spec='$libname${shared_ext} $libname.a'
-- dynamic_linker='OS/2 ld.exe'
-- shlibpath_var=LIBPATH
-- ;;
--
--osf3* | osf4* | osf5*)
-- version_type=osf
-- need_lib_prefix=no
-- need_version=no
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-- ;;
--
--sco3.2v5*)
-- version_type=osf
-- soname_spec='${libname}${release}${shared_ext}$major'
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--solaris*)
-- version_type=linux
-- need_lib_prefix=no
-- need_version=no
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- hardcode_into_libs=yes
-- # ldd complains unless libraries are executable
-- postinstall_cmds='chmod +x $lib'
-- ;;
--
--sunos4*)
-- version_type=sunos
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-- shlibpath_var=LD_LIBRARY_PATH
-- shlibpath_overrides_runpath=yes
-- if test "$with_gnu_ld" = yes; then
-- need_lib_prefix=no
-- fi
-- need_version=yes
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- case $host_vendor in
-- sni)
-- shlibpath_overrides_runpath=no
-- need_lib_prefix=no
-- export_dynamic_flag_spec='${wl}-Blargedynsym'
-- runpath_var=LD_RUN_PATH
-- ;;
-- siemens)
-- need_lib_prefix=no
-- ;;
-- motorola)
-- need_lib_prefix=no
-- need_version=no
-- shlibpath_overrides_runpath=no
-- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-- ;;
-- esac
-- ;;
--
--sysv4*MP*)
-- if test -d /usr/nec ;then
-- version_type=linux
-- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-- soname_spec='$libname${shared_ext}.$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- fi
-- ;;
--
--uts4*)
-- version_type=linux
-- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-- soname_spec='${libname}${release}${shared_ext}$major'
-- shlibpath_var=LD_LIBRARY_PATH
-- ;;
--
--*)
-- dynamic_linker=no
-- ;;
--esac
--AC_MSG_RESULT([$dynamic_linker])
--test "$dynamic_linker" = no && can_build_shared=no
--])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
--
--
--# _LT_AC_TAGCONFIG
--# ----------------
--AC_DEFUN([_LT_AC_TAGCONFIG],
--[AC_ARG_WITH([tags],
-- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-- [include additional configurations @<:@automatic@:>@])],
-- [tagnames="$withval"])
--
--if test -f "$ltmain" && test -n "$tagnames"; then
-- if test ! -f "${ofile}"; then
-- AC_MSG_WARN([output file `$ofile' does not exist])
-- fi
--
-- if test -z "$LTCC"; then
-- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-- if test -z "$LTCC"; then
-- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-- else
-- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-- fi
-- fi
--
-- # Extract list of available tagged configurations in $ofile.
-- # Note that this assumes the entire list is on one line.
-- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
--
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for tagname in $tagnames; do
-- IFS="$lt_save_ifs"
-- # Check whether tagname contains only valid characters
-- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-- "") ;;
-- *) AC_MSG_ERROR([invalid tag name: $tagname])
-- ;;
-- esac
--
-- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-- then
-- AC_MSG_ERROR([tag name \"$tagname\" already exists])
-- fi
--
-- # Update the list of available tags.
-- if test -n "$tagname"; then
-- echo appending configuration tag \"$tagname\" to $ofile
--
-- case $tagname in
-- CXX)
-- if test -n "$CXX" && test "X$CXX" != "Xno"; then
-- AC_LIBTOOL_LANG_CXX_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- F77)
-- if test -n "$F77" && test "X$F77" != "Xno"; then
-- AC_LIBTOOL_LANG_F77_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- GCJ)
-- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-- AC_LIBTOOL_LANG_GCJ_CONFIG
-- else
-- tagname=""
-- fi
-- ;;
--
-- RC)
-- AC_LIBTOOL_LANG_RC_CONFIG
-- ;;
--
-- *)
-- AC_MSG_ERROR([Unsupported tag name: $tagname])
-- ;;
-- esac
--
-- # Append the new tag name to the list of available tags.
-- if test -n "$tagname" ; then
-- available_tags="$available_tags $tagname"
-- fi
-- fi
-- done
-- IFS="$lt_save_ifs"
--
-- # Now substitute the updated list of available tags.
-- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-- mv "${ofile}T" "$ofile"
-- chmod +x "$ofile"
-- else
-- rm -f "${ofile}T"
-- AC_MSG_ERROR([unable to update list of available tagged configurations.])
-- fi
--fi
--])# _LT_AC_TAGCONFIG
--
--
--# AC_LIBTOOL_DLOPEN
--# -----------------
--# enable checks for dlopen support
--AC_DEFUN([AC_LIBTOOL_DLOPEN],
-- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_DLOPEN
--
--
--# AC_LIBTOOL_WIN32_DLL
--# --------------------
--# declare package support for building win32 dll's
--AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
--[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
--])# AC_LIBTOOL_WIN32_DLL
--
--
--# AC_ENABLE_SHARED([DEFAULT])
--# ---------------------------
--# implement the --enable-shared flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_SHARED],
--[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([shared],
-- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_shared=yes ;;
-- no) enable_shared=no ;;
-- *)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
--])# AC_ENABLE_SHARED
--
--
--# AC_DISABLE_SHARED
--# -----------------
--#- set the default shared flag to --disable-shared
--AC_DEFUN([AC_DISABLE_SHARED],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)
--])# AC_DISABLE_SHARED
--
--
--# AC_ENABLE_STATIC([DEFAULT])
--# ---------------------------
--# implement the --enable-static flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_STATIC],
--[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([static],
-- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_static=yes ;;
-- no) enable_static=no ;;
-- *)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
--])# AC_ENABLE_STATIC
--
--
--# AC_DISABLE_STATIC
--# -----------------
--# set the default static flag to --disable-static
--AC_DEFUN([AC_DISABLE_STATIC],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)
--])# AC_DISABLE_STATIC
--
--
--# AC_ENABLE_FAST_INSTALL([DEFAULT])
--# ---------------------------------
--# implement the --enable-fast-install flag
--# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
--AC_DEFUN([AC_ENABLE_FAST_INSTALL],
--[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE([fast-install],
-- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-- [p=${PACKAGE-default}
-- case $enableval in
-- yes) enable_fast_install=yes ;;
-- no) enable_fast_install=no ;;
-- *)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-- for pkg in $enableval; do
-- IFS="$lt_save_ifs"
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$lt_save_ifs"
-- ;;
-- esac],
-- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
--])# AC_ENABLE_FAST_INSTALL
--
--
--# AC_DISABLE_FAST_INSTALL
--# -----------------------
--# set the default to --disable-fast-install
--AC_DEFUN([AC_DISABLE_FAST_INSTALL],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)
--])# AC_DISABLE_FAST_INSTALL
--
--
--# AC_LIBTOOL_PICMODE([MODE])
--# --------------------------
--# implement the --with-pic flag
--# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
--AC_DEFUN([AC_LIBTOOL_PICMODE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--pic_mode=ifelse($#,1,$1,default)
--])# AC_LIBTOOL_PICMODE
--
--
--# AC_PROG_EGREP
--# -------------
--# This is predefined starting with Autoconf 2.54, so this conditional
--# definition can be removed once we require Autoconf 2.54 or later.
--m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
--[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-- fi])
-- EGREP=$ac_cv_prog_egrep
-- AC_SUBST([EGREP])
--])])
--
--
--# AC_PATH_TOOL_PREFIX
--# -------------------
--# find a file program which can recognise shared library
--AC_DEFUN([AC_PATH_TOOL_PREFIX],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_MSG_CHECKING([for $1])
--AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
--[case $MAGIC_CMD in
--[[\\/*] | ?:[\\/]*])
-- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-- ;;
--*)
-- lt_save_MAGIC_CMD="$MAGIC_CMD"
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
--dnl $ac_dummy forces splitting on constant user-supplied paths.
--dnl POSIX.2 word splitting is done only on the output of word expansions,
--dnl not every word. This closes a longstanding sh security hole.
-- ac_dummy="ifelse([$2], , $PATH, [$2])"
-- for ac_dir in $ac_dummy; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$1; then
-- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-- if test -n "$file_magic_test_file"; then
-- case $deplibs_check_method in
-- "file_magic "*)
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-- $EGREP "$file_magic_regex" > /dev/null; then
-- :
-- else
-- cat <<EOF 1>&2
--
--*** Warning: the command libtool uses to detect shared libraries,
--*** $file_magic_cmd, produces output that libtool cannot recognize.
--*** The result is that libtool may fail to recognize shared libraries
--*** as such. This will affect the creation of libtool libraries that
--*** depend on shared libraries, but programs linked with such libtool
--*** libraries will work regardless of this problem. Nevertheless, you
--*** may want to report the problem to your system manager and/or to
--*** bug-libtool@gnu.org
--
--EOF
-- fi ;;
-- esac
-- fi
-- break
-- fi
-- done
-- IFS="$lt_save_ifs"
-- MAGIC_CMD="$lt_save_MAGIC_CMD"
-- ;;
--esac])
--MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
--if test -n "$MAGIC_CMD"; then
-- AC_MSG_RESULT($MAGIC_CMD)
--else
-- AC_MSG_RESULT(no)
--fi
--])# AC_PATH_TOOL_PREFIX
--
--
--# AC_PATH_MAGIC
--# -------------
--# find a file program which can recognise a shared library
--AC_DEFUN([AC_PATH_MAGIC],
--[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
--if test -z "$lt_cv_path_MAGIC_CMD"; then
-- if test -n "$ac_tool_prefix"; then
-- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-- else
-- MAGIC_CMD=:
-- fi
--fi
--])# AC_PATH_MAGIC
--
--
--# AC_PROG_LD
--# ----------
--# find the path to the GNU or non-GNU linker
--AC_DEFUN([AC_PROG_LD],
--[AC_ARG_WITH([gnu-ld],
-- [AC_HELP_STRING([--with-gnu-ld],
-- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-- [test "$withval" = no || with_gnu_ld=yes],
-- [with_gnu_ld=no])
--AC_REQUIRE([LT_AC_PROG_SED])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$GCC" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by $CC])
-- case $host in
-- *-*-mingw*)
-- # gcc leaves a trailing carriage return which upsets mingw
-- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-- *)
-- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-- esac
-- case $ac_prog in
-- # Accept absolute paths.
-- [[\\/]]* | ?:[[\\/]]*)
-- re_direlt='/[[^/]][[^/]]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(lt_cv_path_LD,
--[if test -z "$LD"; then
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- lt_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-- *GNU* | *'with BFD'*)
-- test "$with_gnu_ld" != no && break
-- ;;
-- *)
-- test "$with_gnu_ld" != yes && break
-- ;;
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
--else
-- lt_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$lt_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])# AC_PROG_LD
--
--
--# AC_PROG_LD_GNU
--# --------------
--AC_DEFUN([AC_PROG_LD_GNU],
--[AC_REQUIRE([AC_PROG_EGREP])dnl
--AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
--*GNU* | *'with BFD'*)
-- lt_cv_prog_gnu_ld=yes
-- ;;
--*)
-- lt_cv_prog_gnu_ld=no
-- ;;
--esac])
--with_gnu_ld=$lt_cv_prog_gnu_ld
--])# AC_PROG_LD_GNU
--
--
--# AC_PROG_LD_RELOAD_FLAG
--# ----------------------
--# find reload flag for linker
--# -- PORTME Some linkers may need a different reload flag.
--AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
--[AC_CACHE_CHECK([for $LD option to reload object files],
-- lt_cv_ld_reload_flag,
-- [lt_cv_ld_reload_flag='-r'])
--reload_flag=$lt_cv_ld_reload_flag
--case $reload_flag in
--"" | " "*) ;;
--*) reload_flag=" $reload_flag" ;;
--esac
--reload_cmds='$LD$reload_flag -o $output$reload_objs'
--])# AC_PROG_LD_RELOAD_FLAG
--
--
--# AC_DEPLIBS_CHECK_METHOD
--# -----------------------
--# how to check for library dependencies
--# -- PORTME fill in with the dynamic library characteristics
--AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
--[AC_CACHE_CHECK([how to recognise dependent libraries],
--lt_cv_deplibs_check_method,
--[lt_cv_file_magic_cmd='$MAGIC_CMD'
--lt_cv_file_magic_test_file=
--lt_cv_deplibs_check_method='unknown'
--# Need to set the preceding variable on all platforms that support
--# interlibrary dependencies.
--# 'none' -- dependencies not supported.
--# `unknown' -- same as none, but documents that we really don't know.
--# 'pass_all' -- all dependencies passed with no checks.
--# 'test_compile' -- check by making test program.
--# 'file_magic [[regex]]' -- check by looking for files in library path
--# which responds to the $file_magic_cmd with a given extended regex.
--# If you have `file' or equivalent on your system and you're not sure
--# whether `pass_all' will *always* work, you probably want this one.
--
--case $host_os in
--aix4* | aix5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--beos*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--bsdi4*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- ;;
--
--cygwin* | mingw* | pw32*)
-- # win32_libid is a shell function defined in ltmain.sh
-- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-- lt_cv_file_magic_cmd='win32_libid'
-- ;;
--
--darwin* | rhapsody*)
-- # this will be overwritten by pass_all, but leave it in just in case
-- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-- lt_cv_file_magic_cmd='/usr/bin/file -L'
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
-- ;;
-- *) # Darwin 1.3 on
-- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-- ;;
-- esac
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--freebsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- case $host_cpu in
-- i*86 )
-- # Not sure whether the presence of OpenBSD here was a mistake.
-- # Let's accept both of them until this is cleared up.
-- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- ;;
-- esac
-- else
-- lt_cv_deplibs_check_method=pass_all
-- fi
-- ;;
--
--gnu*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--hpux10.20* | hpux11*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- case "$host_cpu" in
-- ia64*)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-- ;;
-- hppa*64*)
-- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-- ;;
-- *)
-- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-- lt_cv_file_magic_test_file=/usr/lib/libc.sl
-- ;;
-- esac
-- ;;
--
--irix5* | irix6* | nonstopux*)
-- case $host_os in
-- irix5* | nonstopux*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-- ;;
-- *)
-- case $LD in
-- *-32|*"-32 ") libmagic=32-bit;;
-- *-n32|*"-n32 ") libmagic=N32;;
-- *-64|*"-64 ") libmagic=64-bit;;
-- *) libmagic=never-match;;
-- esac
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-- ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--# This must be Linux ELF.
--linux*)
-- case $host_cpu in
-- alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*)
-- lt_cv_deplibs_check_method=pass_all ;;
-- *)
-- # glibc up to 2.1.1 does not perform some relocations on ARM
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-- esac
-- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-- ;;
--
--netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-- else
-- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-- fi
-- ;;
--
--newos6*)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=/usr/lib/libnls.so
-- ;;
--
--nto-qnx)
-- lt_cv_deplibs_check_method=unknown
-- ;;
--
--openbsd*)
-- lt_cv_file_magic_cmd=/usr/bin/file
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-- else
-- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-- fi
-- ;;
--
--osf3* | osf4* | osf5*)
-- # this will be overridden with pass_all, but let us keep it just in case
-- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-- lt_cv_file_magic_test_file=/shlib/libc.so
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--sco3.2v5*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--
--solaris*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
--
--sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- case $host_vendor in
-- motorola)
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-- ;;
-- ncr)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- sequent)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-- ;;
-- sni)
-- lt_cv_file_magic_cmd='/bin/file'
-- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-- lt_cv_file_magic_test_file=/lib/libc.so
-- ;;
-- siemens)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
-- esac
-- ;;
--
--sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
-- lt_cv_deplibs_check_method=pass_all
-- ;;
--esac
--])
--file_magic_cmd=$lt_cv_file_magic_cmd
--deplibs_check_method=$lt_cv_deplibs_check_method
--test -z "$deplibs_check_method" && deplibs_check_method=unknown
--])# AC_DEPLIBS_CHECK_METHOD
--
--
--# AC_PROG_NM
--# ----------
--# find the path to a BSD-compatible name lister
--AC_DEFUN([AC_PROG_NM],
--[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- lt_cv_path_NM="$NM"
--else
-- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- IFS="$lt_save_ifs"
-- test -z "$ac_dir" && ac_dir=.
-- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
-- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- # Tru64's nm complains that /dev/null is an invalid object file
-- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-- */dev/null* | *'Invalid file or object type'*)
-- lt_cv_path_NM="$tmp_nm -B"
-- break
-- ;;
-- *)
-- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-- */dev/null*)
-- lt_cv_path_NM="$tmp_nm -p"
-- break
-- ;;
-- *)
-- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- ;;
-- esac
-- esac
-- fi
-- done
-- IFS="$lt_save_ifs"
-- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
--fi])
--NM="$lt_cv_path_NM"
--])# AC_PROG_NM
--
--
--# AC_CHECK_LIBM
--# -------------
--# check for math library
--AC_DEFUN([AC_CHECK_LIBM],
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case $host in
--*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-- # These system don't have libm, or don't need it
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, cos, LIBM="-lm")
-- ;;
--esac
--])# AC_CHECK_LIBM
--
--
--# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl convenience library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
--# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
--# '${top_srcdir}/' (note the single quotes!). If your package is not
--# flat and you're not using automake, define top_builddir and
--# top_srcdir appropriately in the Makefiles.
--AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case $enable_ltdl_convenience in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_CONVENIENCE
--
--
--# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
--# -----------------------------------
--# sets LIBLTDL to the link flags for the libltdl installable library and
--# LTDLINCL to the include flags for the libltdl header and adds
--# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
--# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
--# DIRECTORY is not provided and an installed libltdl is not found, it is
--# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
--# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
--# quotes!). If your package is not flat and you're not using automake,
--# define top_builddir and top_srcdir appropriately in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
--[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, lt_dlinit,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- LTDLINCL=
-- fi
-- # For backwards non-gettext consistent compatibility...
-- INCLTDL="$LTDLINCL"
--])# AC_LIBLTDL_INSTALLABLE
--
--
--# AC_LIBTOOL_CXX
--# --------------
--# enable support for C++ libraries
--AC_DEFUN([AC_LIBTOOL_CXX],
--[AC_REQUIRE([_LT_AC_LANG_CXX])
--])# AC_LIBTOOL_CXX
--
--
--# _LT_AC_LANG_CXX
--# ---------------
--AC_DEFUN([_LT_AC_LANG_CXX],
--[AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,CXX" | sed 's/^,//'`])
--])# _LT_AC_LANG_CXX
--
--
--# AC_LIBTOOL_F77
--# --------------
--# enable support for Fortran 77 libraries
--AC_DEFUN([AC_LIBTOOL_F77],
--[AC_REQUIRE([_LT_AC_LANG_F77])
--])# AC_LIBTOOL_F77
--
--
--# _LT_AC_LANG_F77
--# ---------------
--AC_DEFUN([_LT_AC_LANG_F77],
--[AC_REQUIRE([AC_PROG_F77])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,F77" | sed 's/^,//'`])
--])# _LT_AC_LANG_F77
--
--
--# AC_LIBTOOL_GCJ
--# --------------
--# enable support for GCJ libraries
--AC_DEFUN([AC_LIBTOOL_GCJ],
--[AC_REQUIRE([_LT_AC_LANG_GCJ])
--])# AC_LIBTOOL_GCJ
--
--
--# _LT_AC_LANG_GCJ
--# ---------------
--AC_DEFUN([_LT_AC_LANG_GCJ],
--[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,GCJ" | sed 's/^,//'`])
--])# _LT_AC_LANG_GCJ
--
--
--# AC_LIBTOOL_RC
--# --------------
--# enable support for Windows resource files
--AC_DEFUN([AC_LIBTOOL_RC],
--[AC_REQUIRE([LT_AC_PROG_RC])
--_LT_AC_SHELL_INIT([tagnames=`echo "$tagnames,RC" | sed 's/^,//'`])
--])# AC_LIBTOOL_RC
--
--
--# AC_LIBTOOL_LANG_C_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
--AC_DEFUN([_LT_AC_LANG_C_CONFIG],
--[lt_save_CC="$CC"
--AC_LANG_PUSH(C)
--
--# Source file extension for C test sources.
--ac_ext=c
--
--# Object file extension for compiled C test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(){return(0);}\n'
--
--_LT_AC_SYS_COMPILER
--
--#
--# Check for any special shared library compilation flags.
--#
--_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
--if test "$GCC" = no; then
-- case $host_os in
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
-- ;;
-- esac
--fi
--if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
-- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
-- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then :
-- else
-- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
-- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
-- fi
--fi
--
--
--#
--# Check to make sure the static flag actually works.
--#
--AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
-- [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
--
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--# Report which librarie types wil actually be built
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--
--aix4*)
-- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-- test "$enable_shared" = yes && enable_static=no
-- fi
-- ;;
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- output_verbose_link_cmd='echo'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_C_CONFIG
--
--
--# AC_LIBTOOL_LANG_CXX_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
--AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
--[AC_LANG_PUSH(C++)
--AC_REQUIRE([AC_PROG_CXX])
--AC_REQUIRE([AC_PROG_CXXCPP])
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Dependencies to place before and after the object being linked:
--_LT_AC_TAGVAR(predep_objects, $1)=
--_LT_AC_TAGVAR(postdep_objects, $1)=
--_LT_AC_TAGVAR(predeps, $1)=
--_LT_AC_TAGVAR(postdeps, $1)=
--_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
--
--# Source file extension for C++ test sources.
--ac_ext=cc
--
--# Object file extension for compiled C++ test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="int some_variable = 0;\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC=$CC
--lt_save_LD=$LD
--lt_save_GCC=$GCC
--GCC=$GXX
--lt_save_with_gnu_ld=$with_gnu_ld
--lt_save_path_LD=$lt_cv_path_LD
--if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
--else
-- unset lt_cv_prog_gnu_ld
--fi
--if test -n "${lt_cv_path_LDCXX+set}"; then
-- lt_cv_path_LD=$lt_cv_path_LDCXX
--else
-- unset lt_cv_path_LD
--fi
--test -z "${LDCXX+set}" || LD=$LDCXX
--CC=${CXX-"c++"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--# We don't want -fno-exception wen compiling C++ code, so set the
--# no_builtin_flag separately
--if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--else
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--fi
--
--if test "$GXX" = yes; then
-- # Set up default GNU C++ configuration
--
-- AC_PROG_LD
--
-- # Check if GNU C++ uses GNU ld as the underlying linker, since the
-- # archiving commands below assume that GNU ld is being used.
-- if test "$with_gnu_ld" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-- # investigate it a little bit more. (MM)
-- wlarc='${wl}'
--
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-- grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- else
-- with_gnu_ld=no
-- wlarc=
--
-- # A generic and very simple default shared library creation
-- # command for GNU C++ for the case where it uses the native
-- # linker, instead of GNU ld. If possible, this setting should
-- # overridden to take advantage of the native linker features on
-- # the platform it is being used on.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-- fi
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
--else
-- GXX=no
-- with_gnu_ld=no
-- wlarc=
--fi
--
--# PORTME: fill in a description of your system's C++ link characteristics
--AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--_LT_AC_TAGVAR(ld_shlibs, $1)=yes
--case $host_os in
-- aix3*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- case $ld_flag in
-- *-brtl*)
-- aix_use_runtimelinking=yes
-- break
-- ;;
-- esac
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GXX" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
--
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
--
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- case $cc_basename in
-- ec++)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- freebsd[12]*)
-- # C++ shared libraries reported to be fairly broken before switch to ELF
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- freebsd-elf*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- freebsd*)
-- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-- # conventions
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- ;;
-- gnu*)
-- ;;
-- hpux9*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- hpux10*|hpux11*)
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
-- esac
-- fi
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-- # but as the default
-- # location of the library.
-- ;;
-- esac
--
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- aCC)
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test $with_gnu_ld = no; then
-- case "$host_cpu" in
-- ia64*|hppa*64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- ;;
-- esac
-- fi
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- irix5* | irix6*)
-- case $cc_basename in
-- CC)
-- # SGI C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- # Archives containing C++ object files must be created using
-- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-- ;;
-- *)
-- if test "$GXX" = yes; then
-- if test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-- fi
-- fi
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
-- esac
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-- ;;
-- icpc)
-- # Intel C++
-- with_gnu_ld=yes
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-- ;;
-- cxx)
-- # Compaq C++
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
--
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- esac
-- ;;
-- lynxos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- m88k*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- fi
-- # Workaround some broken pre-1.5 toolchains
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-- ;;
-- osf3*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
--
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- # Kuck and Associates, Inc. (KAI) C++ Compiler
--
-- # KCC will only create a shared library if the output file
-- # ends with ".so" (or ".sl" for HP-UX), so rename the library
-- # to its proper name (with version) after linking.
-- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Archives containing C++ object files must be created using
-- # the KAI C++ compiler.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- cxx)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-- echo "-hidden">> $lib.exp~
-- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
-- $rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-- ;;
-- *)
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
--
-- else
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
-- ;;
-- psos*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- sco*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case $cc_basename in
-- CC)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- lcc)
-- # Lucid
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[0-5] | solaris2.[0-5].*) ;;
-- *)
-- # The C++ compiler is used as linker so we must use $wl
-- # flag to pass the commands to the underlying system
-- # linker.
-- # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-- ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- #
-- # There doesn't appear to be a way to prevent this compiler from
-- # explicitly linking system object files so we need to strip them
-- # from the output so that they don't get included in the library
-- # dependencies.
-- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
--
-- # Archives containing C++ object files must be created using
-- # "CC -xar", where "CC" is the Sun C++ compiler. This is
-- # necessary to make sure instantiated templates are included
-- # in the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
--
-- # The C++ compiler must be used to create the archive.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-- ;;
-- *)
-- # GNU C++ compiler with Solaris linker
-- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-- if $CC --version | grep -v '^2\.7' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- else
-- # g++ 2.7 appears to require `-G' NOT `-shared' on this
-- # platform.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
--
-- # Commands to make compiler produce verbose output that lists
-- # what "hidden" libraries, object files and flags are used when
-- # linking a shared library.
-- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-- fi
--
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-- fi
-- ;;
-- esac
-- ;;
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- ;;
-- vxworks*)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- *)
-- # FIXME: insert proper C++ library support
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--esac
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$GXX"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_POSTDEP_PREDEP($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC=$lt_save_CC
--LDCXX=$LD
--LD=$lt_save_LD
--GCC=$lt_save_GCC
--with_gnu_ldcxx=$with_gnu_ld
--with_gnu_ld=$lt_save_with_gnu_ld
--lt_cv_path_LDCXX=$lt_cv_path_LD
--lt_cv_path_LD=$lt_save_path_LD
--lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
--lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
--])# AC_LIBTOOL_LANG_CXX_CONFIG
--
--# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
--# ------------------------
--# Figure out "hidden" library dependencies from verbose
--# compiler output when linking a shared library.
--# Parse the compiler output and extract the necessary
--# objects, libraries and library flags.
--AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
--dnl we can't use the lt_simple_compile_test_code here,
--dnl because it contains code intended for an executable,
--dnl not a library. It's possible we should let each
--dnl tag define a new lt_????_link_test_code variable,
--dnl but it's only used here...
--ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
--int a;
--void foo (void) { a = 0; }
--EOF
--],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
--class Foo
--{
--public:
-- Foo (void) { a = 0; }
--private:
-- int a;
--};
--EOF
--],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-- subroutine foo
-- implicit none
-- integer*4 a
-- a=0
-- return
-- end
--EOF
--],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
--public class foo {
-- private int a;
-- public void bar (void) {
-- a = 0;
-- }
--};
--EOF
--])
--dnl Parse the compiler output and extract the necessary
--dnl objects, libraries and library flags.
--if AC_TRY_EVAL(ac_compile); then
-- # Parse the compiler output and extract the necessary
-- # objects, libraries and library flags.
--
-- # Sentinel used to keep track of whether or not we are before
-- # the conftest object file.
-- pre_test_object_deps_done=no
--
-- # The `*' in the case matches for architectures that use `case' in
-- # $output_verbose_cmd can trigger glob expansion during the loop
-- # eval without this substitution.
-- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
--
-- for p in `eval $output_verbose_link_cmd`; do
-- case $p in
--
-- -L* | -R* | -l*)
-- # Some compilers place space between "-{L,R}" and the path.
-- # Remove the space.
-- if test $p = "-L" \
-- || test $p = "-R"; then
-- prev=$p
-- continue
-- else
-- prev=
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-- # Internal compiler library paths should come after those
-- # provided the user. The postdeps already come after the
-- # user supplied libs so there is no need to process them.
-- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-- fi
-- ;;
-- # The "-l" case would never come before the object being
-- # linked, so don't bother handling this case.
-- esac
-- else
-- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-- else
-- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-- fi
-- fi
-- ;;
--
-- *.$objext)
-- # This assumes that the test object file only shows up
-- # once in the compiler output.
-- if test "$p" = "conftest.$objext"; then
-- pre_test_object_deps_done=yes
-- continue
-- fi
--
-- if test "$pre_test_object_deps_done" = no; then
-- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-- _LT_AC_TAGVAR(predep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-- fi
-- else
-- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-- else
-- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-- fi
-- fi
-- ;;
--
-- *) ;; # Ignore the rest.
--
-- esac
-- done
--
-- # Clean up.
-- rm -f a.out a.exe
--else
-- echo "libtool.m4: error: problem compiling $1 test program"
--fi
--
--$rm -f confest.$objext
--
--case " $_LT_AC_TAGVAR(postdeps, $1) " in
--*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
--esac
--])# AC_LIBTOOL_POSTDEP_PREDEP
--
--# AC_LIBTOOL_LANG_F77_CONFIG
--# ------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
--AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
--[AC_REQUIRE([AC_PROG_F77])
--AC_LANG_PUSH(Fortran 77)
--
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--_LT_AC_TAGVAR(allow_undefined_flag, $1)=
--_LT_AC_TAGVAR(always_export_symbols, $1)=no
--_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
--_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_direct, $1)=no
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
--_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
--_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
--_LT_AC_TAGVAR(hardcode_automatic, $1)=no
--_LT_AC_TAGVAR(module_cmds, $1)=
--_LT_AC_TAGVAR(module_expsym_cmds, $1)=
--_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
--_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
--_LT_AC_TAGVAR(no_undefined_flag, $1)=
--_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
--_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
--
--# Source file extension for f77 test sources.
--ac_ext=f
--
--# Object file extension for compiled f77 test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code=" subroutine t\n return\n end\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code=" program t\n end\n"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${F77-"f77"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
--
--AC_MSG_CHECKING([if libtool supports shared libraries])
--AC_MSG_RESULT([$can_build_shared])
--
--AC_MSG_CHECKING([whether to build shared libraries])
--test "$can_build_shared" = "no" && enable_shared=no
--
--# On AIX, shared libraries and static libraries use the same namespace, and
--# are all built from PIC.
--case "$host_os" in
--aix3*)
-- test "$enable_shared" = yes && enable_static=no
-- if test -n "$RANLIB"; then
-- archive_cmds="$archive_cmds~\$RANLIB \$lib"
-- postinstall_cmds='$RANLIB $lib'
-- fi
-- ;;
--aix4*)
-- test "$enable_shared" = yes && enable_static=no
-- ;;
--esac
--AC_MSG_RESULT([$enable_shared])
--
--AC_MSG_CHECKING([whether to build static libraries])
--# Make sure either enable_shared or enable_static is yes.
--test "$enable_shared" = yes || enable_static=yes
--AC_MSG_RESULT([$enable_static])
--
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--_LT_AC_TAGVAR(GCC, $1)="$G77"
--_LT_AC_TAGVAR(LD, $1)="$LD"
--
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_POP
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_F77_CONFIG
--
--
--# AC_LIBTOOL_LANG_GCJ_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the C compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
--AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for Java test sources.
--ac_ext=java
--
--# Object file extension for compiled Java test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code="class foo {}\n"
--
--# Code to be used in simple link tests
--lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${GCJ-"gcj"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--
--# GCJ did not exist at the time GCC didn't implicitly link libc in.
--_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
--
--## CAVEAT EMPTOR:
--## There is no encapsulation within the following macros, do not change
--## the running order or otherwise move them around unless you know exactly
--## what you are doing...
--AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
--AC_LIBTOOL_PROG_COMPILER_PIC($1)
--AC_LIBTOOL_PROG_CC_C_O($1)
--AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
--AC_LIBTOOL_PROG_LD_SHLIBS($1)
--AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
--AC_LIBTOOL_SYS_LIB_STRIP
--AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
--AC_LIBTOOL_DLOPEN_SELF($1)
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_GCJ_CONFIG
--
--
--# AC_LIBTOOL_LANG_RC_CONFIG
--# --------------------------
--# Ensure that the configuration vars for the Windows resource compiler are
--# suitably defined. Those variables are subsequently used by
--# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
--AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
--AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
--[AC_LANG_SAVE
--
--# Source file extension for RC test sources.
--ac_ext=rc
--
--# Object file extension for compiled RC test sources.
--objext=o
--_LT_AC_TAGVAR(objext, $1)=$objext
--
--# Code to be used in simple compile tests
--lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
--
--# Code to be used in simple link tests
--lt_simple_link_test_code="$lt_simple_compile_test_code"
--
--# ltmain only uses $CC for tagged configurations so make sure $CC is set.
--_LT_AC_SYS_COMPILER
--
--# Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
--CC=${RC-"windres"}
--compiler=$CC
--_LT_AC_TAGVAR(compiler, $1)=$CC
--_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
--
--AC_LIBTOOL_CONFIG($1)
--
--AC_LANG_RESTORE
--CC="$lt_save_CC"
--])# AC_LIBTOOL_LANG_RC_CONFIG
--
--
--# AC_LIBTOOL_CONFIG([TAGNAME])
--# ----------------------------
--# If TAGNAME is not passed, then create an initial libtool script
--# with a default configuration from the untagged config vars. Otherwise
--# add code to config.status for appending the configuration named by
--# TAGNAME from the matching tagged config vars.
--AC_DEFUN([AC_LIBTOOL_CONFIG],
--[# The else clause should only fire when bootstrapping the
--# libtool distribution, otherwise you forgot to ship ltmain.sh
--# with your package, and you will get complaints that there are
--# no rules to generate ltmain.sh.
--if test -f "$ltmain"; then
-- # See if we are running on zsh, and set the options which allow our commands through
-- # without removal of \ escapes.
-- if test -n "${ZSH_VERSION+set}" ; then
-- setopt NO_GLOB_SUBST
-- fi
-- # Now quote all the things that may contain metacharacters while being
-- # careful not to overquote the AC_SUBSTed values. We take copies of the
-- # variables and quote the copies for generation of the libtool script.
-- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
-- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-- deplibs_check_method reload_flag reload_cmds need_locks \
-- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-- lt_cv_sys_global_symbol_to_c_name_address \
-- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-- old_postinstall_cmds old_postuninstall_cmds \
-- _LT_AC_TAGVAR(compiler, $1) \
-- _LT_AC_TAGVAR(CC, $1) \
-- _LT_AC_TAGVAR(LD, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-- _LT_AC_TAGVAR(old_archive_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-- _LT_AC_TAGVAR(predep_objects, $1) \
-- _LT_AC_TAGVAR(postdep_objects, $1) \
-- _LT_AC_TAGVAR(predeps, $1) \
-- _LT_AC_TAGVAR(postdeps, $1) \
-- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-- _LT_AC_TAGVAR(archive_cmds, $1) \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(postinstall_cmds, $1) \
-- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-- _LT_AC_TAGVAR(no_undefined_flag, $1) \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-- _LT_AC_TAGVAR(hardcode_automatic, $1) \
-- _LT_AC_TAGVAR(module_cmds, $1) \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-- _LT_AC_TAGVAR(exclude_expsyms, $1) \
-- _LT_AC_TAGVAR(include_expsyms, $1); do
--
-- case $var in
-- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_cmds, $1) | \
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(module_cmds, $1) | \
-- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-- extract_expsyms_cmds | reload_cmds | finish_cmds | \
-- postinstall_cmds | postuninstall_cmds | \
-- old_postinstall_cmds | old_postuninstall_cmds | \
-- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-- # Double-quote double-evaled strings.
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-- ;;
-- *)
-- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-- ;;
-- esac
-- done
--
-- case $lt_echo in
-- *'\[$]0 --fallback-echo"')
-- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-- ;;
-- esac
--
--ifelse([$1], [],
-- [cfgfile="${ofile}T"
-- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-- $rm -f "$cfgfile"
-- AC_MSG_NOTICE([creating $ofile])],
-- [cfgfile="$ofile"])
--
-- cat <<__EOF__ >> "$cfgfile"
--ifelse([$1], [],
--[#! $SHELL
--
--# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
--# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
--# NOTE: Changes made to this file will be lost: look at ltmain.sh.
--#
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
--# Free Software Foundation, Inc.
--#
--# This file is part of GNU Libtool:
--# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# A sed program that does not truncate output.
--SED=$lt_SED
--
--# Sed that helps us avoid accidentally triggering echo(1) options like -n.
--Xsed="$SED -e s/^X//"
--
--# The HP-UX ksh and POSIX shell print the target directory to stdout
--# if CDPATH is set.
--if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
--
--# The names of the tagged configurations supported by this script.
--available_tags=
--
--# ### BEGIN LIBTOOL CONFIG],
--[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
--
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--
--# Shell to use when invoking shell scripts.
--SHELL=$lt_SHELL
--
--# Whether or not to build shared libraries.
--build_libtool_libs=$enable_shared
--
--# Whether or not to build static libraries.
--build_old_libs=$enable_static
--
--# Whether or not to add -lc for building shared libraries.
--build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
--
--# Whether or not to disallow shared libs when runtime libs are static
--allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
--
--# Whether or not to optimize for fast installation.
--fast_install=$enable_fast_install
--
--# The host system.
--host_alias=$host_alias
--host=$host
--
--# An echo program that does not interpret backslashes.
--echo=$lt_echo
--
--# The archiver.
--AR=$lt_AR
--AR_FLAGS=$lt_AR_FLAGS
--
--# A C compiler.
--LTCC=$lt_LTCC
--
--# A language-specific compiler.
--CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
--
--# Is the compiler the GNU C compiler?
--with_gcc=$_LT_AC_TAGVAR(GCC, $1)
--
--# An ERE matcher.
--EGREP=$lt_EGREP
--
--# The linker used to build libraries.
--LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
--
--# Whether we need hard or soft links.
--LN_S=$lt_LN_S
--
--# A BSD-compatible nm program.
--NM=$lt_NM
--
--# A symbol stripping program
--STRIP=$STRIP
--
--# Used to examine libraries when file_magic_cmd begins "file"
--MAGIC_CMD=$MAGIC_CMD
--
--# Used on cygwin: DLL creation program.
--DLLTOOL="$DLLTOOL"
--
--# Used on cygwin: object dumper.
--OBJDUMP="$OBJDUMP"
--
--# Used on cygwin: assembler.
--AS="$AS"
--
--# The name of the directory that contains temporary libtool files.
--objdir=$objdir
--
--# How to create reloadable object files.
--reload_flag=$lt_reload_flag
--reload_cmds=$lt_reload_cmds
--
--# How to pass a linker flag through the compiler.
--wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
--
--# Object file suffix (normally "o").
--objext="$ac_objext"
--
--# Old archive suffix (normally "a").
--libext="$libext"
--
--# Shared library suffix (normally ".so").
--shrext='$shrext'
--
--# Executable file suffix (normally "").
--exeext="$exeext"
--
--# Additional compiler flags for building library objects.
--pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
--pic_mode=$pic_mode
--
--# What is the maximum length of a command?
--max_cmd_len=$lt_cv_sys_max_cmd_len
--
--# Does compiler simultaneously support -c and -o options?
--compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
--
--# Must we lock files when doing compilation ?
--need_locks=$lt_need_locks
--
--# Do we need the lib prefix for modules?
--need_lib_prefix=$need_lib_prefix
--
--# Do we need a version for libraries?
--need_version=$need_version
--
--# Whether dlopen is supported.
--dlopen_support=$enable_dlopen
--
--# Whether dlopen of programs is supported.
--dlopen_self=$enable_dlopen_self
--
--# Whether dlopen of statically linked programs is supported.
--dlopen_self_static=$enable_dlopen_self_static
--
--# Compiler flag to prevent dynamic linking.
--link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
--
--# Compiler flag to turn off builtin functions.
--no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
--
--# Compiler flag to allow reflexive dlopens.
--export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
--
--# Compiler flag to generate shared objects directly from archives.
--whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
--
--# Compiler flag to generate thread-safe objects.
--thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
--
--# Library versioning type.
--version_type=$version_type
--
--# Format of library name prefix.
--libname_spec=$lt_libname_spec
--
--# List of archive names. First name is the real one, the rest are links.
--# The last name is the one that the linker finds with -lNAME.
--library_names_spec=$lt_library_names_spec
--
--# The coded name of the library, if different from the real name.
--soname_spec=$lt_soname_spec
--
--# Commands used to build and install an old-style archive.
--RANLIB=$lt_RANLIB
--old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
--old_postinstall_cmds=$lt_old_postinstall_cmds
--old_postuninstall_cmds=$lt_old_postuninstall_cmds
--
--# Create an old-style archive from a shared archive.
--old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
--
--# Create a temporary old-style archive to link instead of a shared archive.
--old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
--
--# Commands used to build and install a shared archive.
--archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
--archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
--postinstall_cmds=$lt_postinstall_cmds
--postuninstall_cmds=$lt_postuninstall_cmds
--
--# Commands used to build a loadable module (assumed same as above if empty)
--module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
--module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
--
--# Commands to strip libraries.
--old_striplib=$lt_old_striplib
--striplib=$lt_striplib
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
--
--# Dependencies to place before the objects being linked to create a
--# shared library.
--predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
--
--# Dependencies to place after the objects being linked to create a
--# shared library.
--postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
--
--# The library search path used internally by the compiler when linking
--# a shared library.
--compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
--
--# Method to check whether dependent libraries are shared objects.
--deplibs_check_method=$lt_deplibs_check_method
--
--# Command to use when deplibs_check_method == file_magic.
--file_magic_cmd=$lt_file_magic_cmd
--
--# Flag that allows shared libraries with undefined symbols to be built.
--allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
--
--# Flag that forces no undefined symbols.
--no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
--
--# Commands used to finish a libtool library installation in a directory.
--finish_cmds=$lt_finish_cmds
--
--# Same as above, but a single script fragment to be evaled but not shown.
--finish_eval=$lt_finish_eval
--
--# Take the output of nm and produce a listing of raw symbols and C names.
--global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
--
--# Transform the output of nm in a proper C declaration
--global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
--
--# Transform the output of nm in a C name address pair
--global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
--
--# This is the shared library runtime path variable.
--runpath_var=$runpath_var
--
--# This is the shared library path variable.
--shlibpath_var=$shlibpath_var
--
--# Is shlibpath searched before the hard-coded library search path?
--shlibpath_overrides_runpath=$shlibpath_overrides_runpath
--
--# How to hardcode a shared library path into an executable.
--hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
--
--# Whether we should hardcode library paths into libraries.
--hardcode_into_libs=$hardcode_into_libs
--
--# Flag to hardcode \$libdir into a binary during linking.
--# This must work even if \$libdir does not exist.
--hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
--
--# If ld is used when linking, flag to hardcode \$libdir into
--# a binary during linking. This must work even if \$libdir does
--# not exist.
--hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
--
--# Whether we need a single -rpath flag with a separated argument.
--hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
--
--# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
--# resulting binary.
--hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
--
--# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
--# resulting binary.
--hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
--
--# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
--# the resulting binary.
--hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
--
--# Set to yes if building a shared library automatically hardcodes DIR into the library
--# and all subsequent libraries and executables linked against it.
--hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
--
--# Variables whose values should be saved in libtool wrapper scripts and
--# restored at relink time.
--variables_saved_for_relink="$variables_saved_for_relink"
--
--# Whether libtool must link a program against all its dependency libraries.
--link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
--
--# Compile-time system search path for libraries
--sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
--
--# Run-time system search path for libraries
--sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
--
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
--
--# Set to yes if exported symbols are required.
--always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
--
--# The commands to list exported symbols.
--export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
--
--# The commands to extract the exported symbol list from a shared archive.
--extract_expsyms_cmds=$lt_extract_expsyms_cmds
--
--# Symbols that should not be listed in the preloaded symbols.
--exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
--
--# Symbols that must always be exported.
--include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
--
--ifelse([$1],[],
--[# ### END LIBTOOL CONFIG],
--[# ### END LIBTOOL TAG CONFIG: $tagname])
--
--__EOF__
--
--ifelse([$1],[], [
-- case $host_os in
-- aix3*)
-- cat <<\EOF >> "$cfgfile"
--
--# AIX sometimes has problems with the GCC collect2 program. For some
--# reason, if we set the COLLECT_NAMES environment variable, the problems
--# vanish in a puff of smoke.
--if test "X${COLLECT_NAMES+set}" != Xset; then
-- COLLECT_NAMES=
-- export COLLECT_NAMES
--fi
--EOF
-- ;;
-- esac
--
-- # We use sed instead of cat because bash on DJGPP gets confused if
-- # if finds mixed CR/LF and LF-only lines. Since sed operates in
-- # text mode, it properly converts lines to CR/LF. This bash problem
-- # is reportedly fixed, but why not run on old versions too?
-- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" || \
-- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-- chmod +x "$ofile"
--])
--else
-- # If there is no Makefile yet, we rely on a make rule to execute
-- # `config.status --recheck' to rerun these tests and create the
-- # libtool script then.
-- test -f Makefile && make "$ltmain"
--fi
--])# AC_LIBTOOL_CONFIG
--
--
--# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
--# -------------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
--[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
--
--_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
--
--if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
--
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-- lt_cv_prog_compiler_rtti_exceptions,
-- [-fno-rtti -fno-exceptions], [],
-- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
--fi
--])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
--
--
--# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--# ---------------------------------
--AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
--[AC_REQUIRE([AC_CANONICAL_HOST])
--AC_REQUIRE([AC_PROG_NM])
--AC_REQUIRE([AC_OBJEXT])
--# Check for command to grab the raw symbol name followed by C symbol from nm.
--AC_MSG_CHECKING([command to parse $NM output from $compiler object])
--AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
--[
--# These are sane defaults that work on at least a few old systems.
--# [They come from Ultrix. What could be older than Ultrix?!! ;)]
--
--# Character class describing NM global symbol codes.
--symcode='[[BCDEGRST]]'
--
--# Regexp to match symbols that can be accessed directly from C.
--sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
--
--# Transform the above into a raw symbol and a C symbol.
--symxfrm='\1 \2\3 \3'
--
--# Transform an extracted symbol line into a proper C declaration
--lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
--
--# Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
--
--# Define system-specific variables.
--case $host_os in
--aix*)
-- symcode='[[BCDT]]'
-- ;;
--cygwin* | mingw* | pw32*)
-- symcode='[[ABCDGISTW]]'
-- ;;
--hpux*) # Its linker distinguishes data from code symbols
-- if test "$host_cpu" = ia64; then
-- symcode='[[ABCDEGRST]]'
-- fi
-- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-- ;;
--irix* | nonstopux*)
-- symcode='[[BCDEGRST]]'
-- ;;
--osf*)
-- symcode='[[BCDEGQRST]]'
-- ;;
--solaris* | sysv5*)
-- symcode='[[BDT]]'
-- ;;
--sysv4)
-- symcode='[[DFNSTU]]'
-- ;;
--esac
--
--# Handle CRLF in mingw tool chain
--opt_cr=
--case $build_os in
--mingw*)
-- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-- ;;
--esac
--
--# If we're using GNU nm, then use its standard symbol codes.
--case `$NM -V 2>&1` in
--*GNU* | *'with BFD'*)
-- symcode='[[ABCDGISTW]]' ;;
--esac
--
--# Try without a prefix undercore, then with it.
--for ac_symprfx in "" "_"; do
--
-- # Write the raw and C identifiers.
-- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
--
-- # Check to see that the pipe works correctly.
-- pipe_works=no
--
-- rm -f conftest*
-- cat > conftest.$ac_ext <<EOF
--#ifdef __cplusplus
--extern "C" {
--#endif
--char nm_test_var;
--void nm_test_func(){}
--#ifdef __cplusplus
--}
--#endif
--int main(){nm_test_var='a';nm_test_func();return(0);}
--EOF
--
-- if AC_TRY_EVAL(ac_compile); then
-- # Now try to grab the symbols.
-- nlist=conftest.nm
-- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-- # Try sorting and uniquifying the output.
-- if sort "$nlist" | uniq > "$nlist"T; then
-- mv -f "$nlist"T "$nlist"
-- else
-- rm -f "$nlist"T
-- fi
--
-- # Make sure that we snagged all the symbols we need.
-- if grep ' nm_test_var$' "$nlist" >/dev/null; then
-- if grep ' nm_test_func$' "$nlist" >/dev/null; then
-- cat <<EOF > conftest.$ac_ext
--#ifdef __cplusplus
--extern "C" {
--#endif
--
--EOF
-- # Now generate the symbol file.
-- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
--
-- cat <<EOF >> conftest.$ac_ext
--#if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
--#else
--# define lt_ptr_t char *
--# define const
--#endif
--
--/* The mapping between symbol names and symbols. */
--const struct {
-- const char *name;
-- lt_ptr_t address;
--}
--lt_preloaded_symbols[[]] =
--{
--EOF
-- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-- cat <<\EOF >> conftest.$ac_ext
-- {0, (lt_ptr_t) 0}
--};
--
--#ifdef __cplusplus
--}
--#endif
--EOF
-- # Now try linking the two files.
-- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-- LIBS="conftstm.$ac_objext"
-- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-- pipe_works=yes
-- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-- else
-- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-- fi
-- else
-- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-- cat conftest.$ac_ext >&5
-- fi
-- rm -f conftest* conftst*
--
-- # Do not use the global_symbol_pipe unless it works.
-- if test "$pipe_works" = yes; then
-- break
-- else
-- lt_cv_sys_global_symbol_pipe=
-- fi
--done
--])
--if test -z "$lt_cv_sys_global_symbol_pipe"; then
-- lt_cv_sys_global_symbol_to_cdecl=
--fi
--if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-- AC_MSG_RESULT(failed)
--else
-- AC_MSG_RESULT(ok)
--fi
--]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
--
--
--# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
--# ---------------------------------------
--AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
--[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
--_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
--
--AC_MSG_CHECKING([for $compiler option to produce PIC])
-- ifelse([$1],[CXX],[
-- # C++ specific cases for pic, static, wl, etc.
-- if test "$GXX" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
-- mingw* | os2* | pw32*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
-- *djgpp*)
-- # DJGPP does not support shared libraries at all
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- case $host_os in
-- aix4* | aix5*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
-- chorus*)
-- case $cc_basename in
-- cxch68)
-- # Green Hills C++ Compiler
-- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-- ;;
-- esac
-- ;;
-- dgux*)
-- case $cc_basename in
-- ec++)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- ghcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- freebsd*)
-- # FreeBSD uses GNU C++
-- ;;
-- hpux9* | hpux10* | hpux11*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- fi
-- ;;
-- aCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- irix5* | irix6* | nonstopux*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- # CC pic flag -KPIC is the default.
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- linux*)
-- case $cc_basename in
-- KCC)
-- # KAI C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- icpc)
-- # Intel C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- cxx)
-- # Compaq C++
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- lynxos*)
-- ;;
-- m88k*)
-- ;;
-- mvs*)
-- case $cc_basename in
-- cxx)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- netbsd*)
-- ;;
-- osf3* | osf4* | osf5*)
-- case $cc_basename in
-- KCC)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-- ;;
-- RCC)
-- # Rational C++ 2.4.1
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- cxx)
-- # Digital/Compaq C++
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # Make sure the PIC flag is empty. It appears that all Alpha
-- # Linux and Compaq Tru64 Unix objects are PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- psos*)
-- ;;
-- sco*)
-- case $cc_basename in
-- CC)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- solaris*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.2, 5.x and Centerline C++
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- ;;
-- gcx)
-- # Green Hills C++ Compiler
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- sunos4*)
-- case $cc_basename in
-- CC)
-- # Sun C++ 4.x
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
-- lcc)
-- # Lucid
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- tandem*)
-- case $cc_basename in
-- NCC)
-- # NonStop-UX NCC 3.20
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- ;;
-- *)
-- ;;
-- esac
-- ;;
-- unixware*)
-- ;;
-- vxworks*)
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--],
--[
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
--
-- case $host_os in
-- aix*)
-- # All AIX code is PIC.
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- amigaos*)
-- # FIXME: we need at least 68020 code to build shared libraries, but
-- # adding the `-m68020' flag to GCC prevents building anything better,
-- # like `-m68040'.
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-- ;;
--
-- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-- # PIC is the default for these OSes.
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- darwin* | rhapsody*)
-- # PIC is the default on this platform
-- # Common symbols not allowed in MH_DYLIB files
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-- ;;
--
-- msdosdjgpp*)
-- # Just because we use GCC doesn't mean we suddenly get shared libraries
-- # on systems that don't support them.
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- enable_shared=no
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-- fi
-- ;;
--
-- hpux*)
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-- ;;
-- esac
-- else
-- # PORTME Check for flag to pass linker flags through the system compiler.
-- case $host_os in
-- aix*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- if test "$host_cpu" = ia64; then
-- # AIX 5 now supports IA64 processor
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- else
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-- fi
-- ;;
--
-- mingw* | pw32* | os2*)
-- # This hack is so that the source file can tell whether it is being
-- # built for inclusion in a dll (and should export symbols for example).
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-- ;;
--
-- hpux9* | hpux10* | hpux11*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-- # not for PA HP-UX.
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- # +Z the default
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-- ;;
-- esac
-- # Is there a better lt_prog_compiler_static that works with the bundled CC?
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # PIC (with -KPIC) is the default.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- linux*)
-- case $CC in
-- icc|ecc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-- ;;
-- ccc)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All Alpha code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
-- esac
-- ;;
--
-- osf3* | osf4* | osf5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- # All OSF/1 code is PIC.
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec ;then
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- fi
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
--
--#
--# Check to make sure the PIC flag actually works.
--#
--if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-- "" | " "*) ;;
-- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-- esac],
-- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
--fi
--case "$host_os" in
-- # For platforms which do not support PIC, -DPIC is meaningless:
-- *djgpp*)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-- ;;
-- *)
-- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-- ;;
--esac
--])
--
--
--# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
--# ------------------------------------
--# See if the linker supports building shared libraries.
--AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
--[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
--ifelse([$1],[CXX],[
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- case $host_os in
-- aix4* | aix5*)
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- ;;
-- pw32*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-- cygwin* | mingw*)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- *)
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-- esac
--],[
-- runpath_var=
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-- _LT_AC_TAGVAR(archive_cmds, $1)=
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-- _LT_AC_TAGVAR(module_cmds, $1)=
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- # include_expsyms should be a list of space-separated symbols to be *always*
-- # included in the symbol list
-- _LT_AC_TAGVAR(include_expsyms, $1)=
-- # exclude_expsyms can be an extended regexp of symbols to exclude
-- # it will be wrapped by ` (' and `)$', so one must not match beginning or
-- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-- # as well as any symbol that contains `d'.
-- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-- # platforms (ab)use it in PIC code, but their linkers get confused if
-- # the symbol is explicitly referenced. Since portable code cannot
-- # rely on this symbol name, it's probably fine to never include it in
-- # preloaded symbol tables.
-- extract_expsyms_cmds=
--
-- case $host_os in
-- cygwin* | mingw* | pw32*)
-- # FIXME: the MSVC++ port hasn't been tested in a loooong time
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- if test "$GCC" != yes; then
-- with_gnu_ld=no
-- fi
-- ;;
-- openbsd*)
-- with_gnu_ld=no
-- ;;
-- esac
--
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- if test "$with_gnu_ld" = yes; then
-- # If archive_cmds runs LD, not CC, wlarc should be empty
-- wlarc='${wl}'
--
-- # See if GNU ld supports shared libraries.
-- case $host_os in
-- aix3* | aix4* | aix5*)
-- # On AIX/PPC, the GNU linker is very broken
-- if test "$host_cpu" != ia64; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: the GNU linker, at least up to release 2.9.1, is reported
--*** to be unable to reliably create shared libraries on AIX.
--*** Therefore, libtool is disabling shared libraries support. If you
--*** really care for shared libraries, you may want to modify your PATH
--*** so that a non-GNU linker is found, and then restart.
--
--EOF
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
--
-- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-- # that the semantics of dynamic libraries on AmigaOS, at least up
-- # to version 4, is to share data among multiple programs linked
-- # with the same dynamic library. Since this doesn't match the
-- # behavior of shared libraries on other platforms, we can't use
-- # them.
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- beos*)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-- # support --undefined. This deserves some investigation. FIXME
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=no
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
--
-- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
-- else
-- ld_shlibs=no
-- fi
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-- wlarc=
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- fi
-- ;;
--
-- solaris* | sysv5*)
-- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- cat <<EOF 1>&2
--
--*** Warning: The releases 2.8.* of the GNU linker cannot reliably
--*** create shared libraries on Solaris systems. Therefore, libtool
--*** is disabling shared libraries support. We urge you to upgrade GNU
--*** binutils to release 2.9.1 or newer. Another option is to modify
--*** your PATH or compiler configuration so that the native linker is
--*** used, and then restart.
--
--EOF
-- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
--
-- sunos4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- wlarc=
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-- else
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-- esac
--
-- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
-- runpath_var=LD_RUN_PATH
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-- # ancient GNU ld didn't support --whole-archive et. al.
-- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-- else
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-- fi
-- fi
-- else
-- # PORTME fill in a description of your system's linker (not GNU ld)
-- case $host_os in
-- aix3*)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-- # Note: this linker hardcodes the directories in LIBPATH if there
-- # are no directories specified by -L.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- if test "$GCC" = yes && test -z "$link_static_flag"; then
-- # Neither direct hardcoding nor static linking is supported with a
-- # broken collect2.
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- fi
-- ;;
--
-- aix4* | aix5*)
-- if test "$host_cpu" = ia64; then
-- # On IA64, the linker does run time linking by default, so we don't
-- # have to do anything special.
-- aix_use_runtimelinking=no
-- exp_sym_flag='-Bexport'
-- no_entry_flag=""
-- else
-- # If we're using GNU nm, then we don't want the "-C" option.
-- # -C means demangle to AIX nm, but means don't demangle with GNU nm
-- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- else
-- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-- fi
-- aix_use_runtimelinking=no
--
-- # Test if we are trying to use run time linking or normal
-- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-- # need to do runtime linking.
-- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-- for ld_flag in $LDFLAGS; do
-- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-- aix_use_runtimelinking=yes
-- break
-- fi
-- done
-- esac
--
-- exp_sym_flag='-bexport'
-- no_entry_flag='-bnoentry'
-- fi
--
-- # When large executables or shared objects are built, AIX ld can
-- # have problems creating the table of contents. If linking a library
-- # or program results in "error TOC overflow" add -mminimal-toc to
-- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
--
-- _LT_AC_TAGVAR(archive_cmds, $1)=''
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
--
-- if test "$GCC" = yes; then
-- case $host_os in aix4.[012]|aix4.[012].*)
-- # We only want to do this on AIX 4.2 and lower, the check
-- # below for broken collect2 doesn't work under 4.3+
-- collect2name=`${CC} -print-prog-name=collect2`
-- if test -f "$collect2name" && \
-- strings "$collect2name" | grep resolve_lib_name >/dev/null
-- then
-- # We have reworked collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- else
-- # We have old collect2
-- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-- # It fails to find uninstalled libraries when the uninstalled
-- # path is not listed in the libpath. Setting hardcode_minus_L
-- # to unsupported forces relinking
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-- fi
-- esac
-- shared_flag='-shared'
-- else
-- # not using gcc
-- if test "$host_cpu" = ia64; then
-- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-- # chokes on -Wl,-G. The following line is correct:
-- shared_flag='-G'
-- else
-- if test "$aix_use_runtimelinking" = yes; then
-- shared_flag='${wl}-G'
-- else
-- shared_flag='${wl}-bM:SRE'
-- fi
-- fi
-- fi
--
-- # It seems that -bexpall does not export symbols beginning with
-- # underscore (_), so it is better to generate a list of symbols to export.
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- if test "$aix_use_runtimelinking" = yes; then
-- # Warning - without using the other runtime loading flags (-brtl),
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-- else
-- if test "$host_cpu" = ia64; then
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-- else
-- # Determine the default libpath from the value encoded in an empty executable.
-- _LT_AC_SYS_LIBPATH_AIX
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-- # Warning - without using the other run time loading flags,
-- # -berok will link without error, but may produce a broken library.
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-- # -bexpall does not export symbols beginning with underscore (_)
-- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-- # Exported symbols can be pulled into shared objects from archives
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- # This is similar to how AIX traditionally builds it's shared libraries.
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-- fi
-- fi
-- ;;
--
-- amigaos*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- # see comment about different semantics on the GNU ld section
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- bsdi4*)
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-- ;;
--
-- cygwin* | mingw* | pw32*)
-- # When not using gcc, we currently assume that we are using
-- # Microsoft Visual C++.
-- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- ;;
--
-- darwin* | rhapsody*)
-- if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- case "$host_os" in
-- rhapsody* | darwin1.[[012]])
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-- ;;
-- *) # Darwin 1.3 on
-- test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-- ;;
-- esac
-- # FIXME: Relying on posixy $() will cause problems for
-- # cross-compilation, but unfortunately the echo tests do not
-- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
-- # `"' quotes if we put them in here... so don't!
-- lt_int_apple_cc_single_mod=no
-- output_verbose_link_cmd='echo'
-- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-- lt_int_apple_cc_single_mod=yes
-- fi
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-- fi
-- _LT_AC_TAGVAR(module_cmds, $1)='$CC -bundle ${wl}-bind_at_load $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags'
-- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- else
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- fi
-- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -bundle $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- fi
-- ;;
--
-- dgux*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- freebsd1*)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
--
-- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-- # support. Future versions do this automatically, but an explicit c++rt0.o
-- # does not break anything, and helps significantly (at the cost of a little
-- # extra space).
-- freebsd2.2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-- freebsd2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-- freebsd*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- hpux9*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- ;;
--
-- hpux10* | hpux11*)
-- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-- ;;
-- esac
-- else
-- case "$host_cpu" in
-- hppa*64*|ia64*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-- ;;
-- esac
-- fi
-- if test "$with_gnu_ld" = no; then
-- case "$host_cpu" in
-- hppa*64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
-- ia64*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- *)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
--
-- # hardcode_minus_L: Not really in the search PATH,
-- # but as the default location of the library.
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- ;;
-- esac
-- fi
-- ;;
--
-- irix5* | irix6* | nonstopux*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- netbsd*)
-- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- newsos6)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- openbsd*)
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-- else
-- case $host_os in
-- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- ;;
-- *)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-- ;;
-- esac
-- fi
-- ;;
--
-- os2*)
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-- ;;
--
-- osf3*)
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- osf4* | osf5*) # as osf3* with the addition of -msym flag
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-- else
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
--
-- # Both c and cxx compiler support -rpath directly
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-- ;;
--
-- sco3.2v5*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- ;;
--
-- solaris*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- case $host_os in
-- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-- esac
-- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-- ;;
--
-- sunos4*)
-- if test "x$host_vendor" = xsequent; then
-- # Use $CC to link under sequent, because it throws in some extra .o
-- # files that make .init and .fini sections work.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-- fi
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4)
-- case $host_vendor in
-- sni)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-- ;;
-- siemens)
-- ## LD is ld it makes a PLAMLIB
-- ## CC just makes a GrossModule.
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no
-- ;;
-- motorola)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-- ;;
-- esac
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv4.3*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-- ;;
--
-- sysv4*MP*)
-- if test -d /usr/nec; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var=LD_RUN_PATH
-- hardcode_runpath_var=yes
-- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-- fi
-- ;;
--
-- sysv4.2uw2*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- hardcode_runpath_var=yes
-- runpath_var=LD_RUN_PATH
-- ;;
--
-- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
-- if test "$GCC" = yes; then
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- else
-- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-- fi
-- runpath_var='LD_RUN_PATH'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- sysv5*)
-- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-- # $CC -shared without GNU ld will not create a library from C++
-- # object files and a static libstdc++, better avoid it by now
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- runpath_var='LD_RUN_PATH'
-- ;;
--
-- uts4*)
-- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-- ;;
--
-- *)
-- _LT_AC_TAGVAR(ld_shlibs, $1)=no
-- ;;
-- esac
-- fi
--])
--AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
--test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
--
--variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
--if test "$GCC" = yes; then
-- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
--fi
--
--#
--# Do we need to explicitly link libc?
--#
--case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
--x|xyes)
-- # Assume -lc should be added
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
--
-- if test "$enable_shared" = yes && test "$GCC" = yes; then
-- case $_LT_AC_TAGVAR(archive_cmds, $1) in
-- *'~'*)
-- # FIXME: we may have to deal with multi-command sequences.
-- ;;
-- '$CC '*)
-- # Test whether the compiler implicitly links with -lc since on some
-- # systems, -lgcc has to come before -lc. If gcc already passes -lc
-- # to ld, don't add -lc before -lgcc.
-- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-- $rm conftest*
-- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
--
-- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-- soname=conftest
-- lib=conftest
-- libobjs=conftest.$ac_objext
-- deplibs=
-- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-- compiler_flags=-v
-- linker_flags=-v
-- verstring=
-- output_objdir=.
-- libname=conftest
-- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-- then
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-- else
-- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-- fi
-- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-- else
-- cat conftest.err 1>&5
-- fi
-- $rm conftest*
-- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-- ;;
-- esac
-- fi
-- ;;
--esac
--])# AC_LIBTOOL_PROG_LD_SHLIBS
--
--
--# _LT_AC_FILE_LTDLL_C
--# -------------------
--# Be careful that the start marker always follows a newline.
--AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
--])# _LT_AC_FILE_LTDLL_C
--
--
--# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
--# ---------------------------------
--AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
--
--
--# old names
--AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
--AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
--AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
--AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
--AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
--AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
--AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
--
--# This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])
--
--AC_DEFUN([LT_AC_PROG_GCJ],
--[AC_CHECK_TOOL(GCJ, gcj, no)
-- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-- AC_SUBST(GCJFLAGS)
--])
--
--AC_DEFUN([LT_AC_PROG_RC],
--[AC_CHECK_TOOL(RC, windres, no)
--])
--
--############################################################
--# NOTE: This macro has been submitted for inclusion into #
--# GNU Autoconf as AC_PROG_SED. When it is available in #
--# a released version of Autoconf we should remove this #
--# macro and use it instead. #
--############################################################
--# LT_AC_PROG_SED
--# --------------
--# Check for a fully-functional sed program, that truncates
--# as few characters as possible. Prefer GNU sed if found.
--AC_DEFUN([LT_AC_PROG_SED],
--[AC_MSG_CHECKING([for a sed that does not truncate output])
--AC_CACHE_VAL(lt_cv_path_SED,
--[# Loop through the user's path and test for sed and gsed.
--# Then use that list of sed's as ones to test for truncation.
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for lt_ac_prog in sed gsed; do
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-- fi
-- done
-- done
--done
--lt_ac_max=0
--lt_ac_count=0
--# Add /usr/xpg4/bin/sed as it is typically found on Solaris
--# along with /bin/sed that truncates output.
--for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-- test ! -f $lt_ac_sed && break
-- cat /dev/null > conftest.in
-- lt_ac_count=0
-- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-- # Check for GNU sed and select it if it is found.
-- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-- lt_cv_path_SED=$lt_ac_sed
-- break
-- fi
-- while true; do
-- cat conftest.in conftest.in >conftest.tmp
-- mv conftest.tmp conftest.in
-- cp conftest.in conftest.nl
-- echo >>conftest.nl
-- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-- cmp -s conftest.out conftest.nl || break
-- # 10000 chars as input seems more than enough
-- test $lt_ac_count -gt 10 && break
-- lt_ac_count=`expr $lt_ac_count + 1`
-- if test $lt_ac_count -gt $lt_ac_max; then
-- lt_ac_max=$lt_ac_count
-- lt_cv_path_SED=$lt_ac_sed
-- fi
-- done
--done
--SED=$lt_cv_path_SED
--])
--AC_MSG_RESULT([$SED])
--])
git.openpandora.org / openembedded.git / commitdiff